android_kernel_xiaomi_sm8350/drivers/scsi/lpfc/lpfc_vport.c

666 lines
19 KiB
C
Raw Normal View History

/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
* Copyright (C) 2004-2008 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* Portions Copyright (C) 2004-2005 Christoph Hellwig *
* *
* This program is free software; you can redistribute it and/or *
* modify it under the terms of version 2 of the GNU General *
* Public License as published by the Free Software Foundation. *
* This program is distributed in the hope that it will be useful. *
* ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND *
* WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, *
* FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE *
* DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
* TO BE LEGALLY INVALID. See the GNU General Public License for *
* more details, a copy of which can be found in the file COPYING *
* included with this package. *
*******************************************************************/
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_disc.h"
#include "lpfc_scsi.h"
#include "lpfc.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_version.h"
#include "lpfc_vport.h"
inline void lpfc_vport_set_state(struct lpfc_vport *vport,
enum fc_vport_state new_state)
{
struct fc_vport *fc_vport = vport->fc_vport;
if (fc_vport) {
/*
* When the transport defines fc_vport_set state we will replace
* this code with the following line
*/
/* fc_vport_set_state(fc_vport, new_state); */
if (new_state != FC_VPORT_INITIALIZING)
fc_vport->vport_last_state = fc_vport->vport_state;
fc_vport->vport_state = new_state;
}
/* for all the error states we will set the invternal state to FAILED */
switch (new_state) {
case FC_VPORT_NO_FABRIC_SUPP:
case FC_VPORT_NO_FABRIC_RSCS:
case FC_VPORT_FABRIC_LOGOUT:
case FC_VPORT_FABRIC_REJ_WWN:
case FC_VPORT_FAILED:
vport->port_state = LPFC_VPORT_FAILED;
break;
case FC_VPORT_LINKDOWN:
vport->port_state = LPFC_VPORT_UNKNOWN;
break;
default:
/* do nothing */
break;
}
}
static int
lpfc_alloc_vpi(struct lpfc_hba *phba)
{
int vpi;
spin_lock_irq(&phba->hbalock);
/* Start at bit 1 because vpi zero is reserved for the physical port */
vpi = find_next_zero_bit(phba->vpi_bmask, (phba->max_vpi + 1), 1);
if (vpi > phba->max_vpi)
vpi = 0;
else
set_bit(vpi, phba->vpi_bmask);
spin_unlock_irq(&phba->hbalock);
return vpi;
}
static void
lpfc_free_vpi(struct lpfc_hba *phba, int vpi)
{
spin_lock_irq(&phba->hbalock);
clear_bit(vpi, phba->vpi_bmask);
spin_unlock_irq(&phba->hbalock);
}
static int
lpfc_vport_sparm(struct lpfc_hba *phba, struct lpfc_vport *vport)
{
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
struct lpfc_dmabuf *mp;
int rc;
pmb = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!pmb) {
return -ENOMEM;
}
mb = &pmb->mb;
lpfc_read_sparam(phba, pmb, vport->vpi);
/*
* Grab buffer pointer and clear context1 so we can use
* lpfc_sli_issue_box_wait
*/
mp = (struct lpfc_dmabuf *) pmb->context1;
pmb->context1 = NULL;
pmb->vport = vport;
rc = lpfc_sli_issue_mbox_wait(phba, pmb, phba->fc_ratov * 2);
if (rc != MBX_SUCCESS) {
if (signal_pending(current)) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
"1830 Signal aborted mbxCmd x%x\n",
mb->mbxCommand);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
if (rc != MBX_TIMEOUT)
mempool_free(pmb, phba->mbox_mem_pool);
return -EINTR;
} else {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT | LOG_VPORT,
"1818 VPort failed init, mbxCmd x%x "
"READ_SPARM mbxStatus x%x, rc = x%x\n",
mb->mbxCommand, mb->mbxStatus, rc);
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
if (rc != MBX_TIMEOUT)
mempool_free(pmb, phba->mbox_mem_pool);
return -EIO;
}
}
memcpy(&vport->fc_sparam, mp->virt, sizeof (struct serv_parm));
memcpy(&vport->fc_nodename, &vport->fc_sparam.nodeName,
sizeof (struct lpfc_name));
memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
sizeof (struct lpfc_name));
lpfc_mbuf_free(phba, mp->virt, mp->phys);
kfree(mp);
mempool_free(pmb, phba->mbox_mem_pool);
return 0;
}
static int
lpfc_valid_wwn_format(struct lpfc_hba *phba, struct lpfc_name *wwn,
const char *name_type)
{
/* ensure that IEEE format 1 addresses
* contain zeros in bits 59-48
*/
if (!((wwn->u.wwn[0] >> 4) == 1 &&
((wwn->u.wwn[0] & 0xf) != 0 || (wwn->u.wwn[1] & 0xf) != 0)))
return 1;
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
"1822 Invalid %s: %02x:%02x:%02x:%02x:"
"%02x:%02x:%02x:%02x\n",
name_type,
wwn->u.wwn[0], wwn->u.wwn[1],
wwn->u.wwn[2], wwn->u.wwn[3],
wwn->u.wwn[4], wwn->u.wwn[5],
wwn->u.wwn[6], wwn->u.wwn[7]);
return 0;
}
static int
lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport)
{
struct lpfc_vport *vport;
unsigned long flags;
spin_lock_irqsave(&phba->hbalock, flags);
list_for_each_entry(vport, &phba->port_list, listentry) {
if (vport == new_vport)
continue;
/* If they match, return not unique */
if (memcmp(&vport->fc_sparam.portName,
&new_vport->fc_sparam.portName,
sizeof(struct lpfc_name)) == 0) {
spin_unlock_irqrestore(&phba->hbalock, flags);
return 0;
}
}
spin_unlock_irqrestore(&phba->hbalock, flags);
return 1;
}
int
lpfc_vport_create(struct fc_vport *fc_vport, bool disable)
{
struct lpfc_nodelist *ndlp;
struct Scsi_Host *shost = fc_vport->shost;
struct lpfc_vport *pport = (struct lpfc_vport *) shost->hostdata;
struct lpfc_hba *phba = pport->phba;
struct lpfc_vport *vport = NULL;
int instance;
int vpi;
int rc = VPORT_ERROR;
int status;
int size;
if ((phba->sli_rev < 3) ||
!(phba->sli3_options & LPFC_SLI3_NPIV_ENABLED)) {
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
"1808 Create VPORT failed: "
"NPIV is not enabled: SLImode:%d\n",
phba->sli_rev);
rc = VPORT_INVAL;
goto error_out;
}
vpi = lpfc_alloc_vpi(phba);
if (vpi == 0) {
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
"1809 Create VPORT failed: "
"Max VPORTs (%d) exceeded\n",
phba->max_vpi);
rc = VPORT_NORESOURCES;
goto error_out;
}
/* Assign an unused board number */
if ((instance = lpfc_get_instance()) < 0) {
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
"1810 Create VPORT failed: Cannot get "
"instance number\n");
lpfc_free_vpi(phba, vpi);
rc = VPORT_NORESOURCES;
goto error_out;
}
vport = lpfc_create_port(phba, instance, &fc_vport->dev);
if (!vport) {
lpfc_printf_log(phba, KERN_ERR, LOG_VPORT,
"1811 Create VPORT failed: vpi x%x\n", vpi);
lpfc_free_vpi(phba, vpi);
rc = VPORT_NORESOURCES;
goto error_out;
}
vport->vpi = vpi;
lpfc_debugfs_initialize(vport);
if ((status = lpfc_vport_sparm(phba, vport))) {
if (status == -EINTR) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1831 Create VPORT Interrupted.\n");
rc = VPORT_ERROR;
} else {
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1813 Create VPORT failed. "
"Cannot get sparam\n");
rc = VPORT_NORESOURCES;
}
lpfc_free_vpi(phba, vpi);
destroy_port(vport);
goto error_out;
}
memcpy(vport->fc_portname.u.wwn, vport->fc_sparam.portName.u.wwn, 8);
memcpy(vport->fc_nodename.u.wwn, vport->fc_sparam.nodeName.u.wwn, 8);
size = strnlen(fc_vport->symbolic_name, LPFC_VNAME_LEN);
if (size) {
vport->vname = kzalloc(size+1, GFP_KERNEL);
if (!vport->vname) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1814 Create VPORT failed. "
"vname allocation failed.\n");
rc = VPORT_ERROR;
lpfc_free_vpi(phba, vpi);
destroy_port(vport);
goto error_out;
}
memcpy(vport->vname, fc_vport->symbolic_name, size+1);
}
if (fc_vport->node_name != 0)
u64_to_wwn(fc_vport->node_name, vport->fc_nodename.u.wwn);
if (fc_vport->port_name != 0)
u64_to_wwn(fc_vport->port_name, vport->fc_portname.u.wwn);
memcpy(&vport->fc_sparam.portName, vport->fc_portname.u.wwn, 8);
memcpy(&vport->fc_sparam.nodeName, vport->fc_nodename.u.wwn, 8);
if (!lpfc_valid_wwn_format(phba, &vport->fc_sparam.nodeName, "WWNN") ||
!lpfc_valid_wwn_format(phba, &vport->fc_sparam.portName, "WWPN")) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1821 Create VPORT failed. "
"Invalid WWN format\n");
lpfc_free_vpi(phba, vpi);
destroy_port(vport);
rc = VPORT_INVAL;
goto error_out;
}
if (!lpfc_unique_wwpn(phba, vport)) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1823 Create VPORT failed. "
"Duplicate WWN on HBA\n");
lpfc_free_vpi(phba, vpi);
destroy_port(vport);
rc = VPORT_INVAL;
goto error_out;
}
*(struct lpfc_vport **)fc_vport->dd_data = vport;
vport->fc_vport = fc_vport;
if ((phba->link_state < LPFC_LINK_UP) ||
(phba->fc_topology == TOPOLOGY_LOOP)) {
lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
rc = VPORT_OK;
goto out;
}
if (disable) {
rc = VPORT_OK;
goto out;
}
/* Use the Physical nodes Fabric NDLP to determine if the link is
* up and ready to FDISC.
*/
ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
lpfc_set_disctmo(vport);
lpfc_initial_fdisc(vport);
} else {
lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"0262 No NPIV Fabric support\n");
}
} else {
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
}
rc = VPORT_OK;
out:
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1825 Vport Created.\n");
lpfc_host_attrib_init(lpfc_shost_from_vport(vport));
error_out:
return rc;
}
static int
disable_vport(struct fc_vport *fc_vport)
{
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
long timeout;
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (ndlp && NLP_CHK_NODE_ACT(ndlp)
&& phba->link_state >= LPFC_LINK_UP) {
vport->unreg_vpi_cmpl = VPORT_INVAL;
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
if (!lpfc_issue_els_npiv_logo(vport, ndlp))
while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
timeout = schedule_timeout(timeout);
}
lpfc_sli_host_down(vport);
/* Mark all nodes for discovery so we can remove them by
* calling lpfc_cleanup_rpis(vport, 1)
*/
list_for_each_entry_safe(ndlp, next_ndlp, &vport->fc_nodes, nlp_listp) {
if (!NLP_CHK_NODE_ACT(ndlp))
continue;
if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
continue;
lpfc_disc_state_machine(vport, ndlp, NULL,
NLP_EVT_DEVICE_RECOVERY);
}
lpfc_cleanup_rpis(vport, 1);
lpfc_stop_vport_timers(vport);
lpfc_unreg_all_rpis(vport);
lpfc_unreg_default_rpis(vport);
/*
* Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi) does the
* scsi_host_put() to release the vport.
*/
lpfc_mbx_unreg_vpi(vport);
lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1826 Vport Disabled.\n");
return VPORT_OK;
}
static int
enable_vport(struct fc_vport *fc_vport)
{
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
struct lpfc_hba *phba = vport->phba;
struct lpfc_nodelist *ndlp = NULL;
if ((phba->link_state < LPFC_LINK_UP) ||
(phba->fc_topology == TOPOLOGY_LOOP)) {
lpfc_vport_set_state(vport, FC_VPORT_LINKDOWN);
return VPORT_OK;
}
vport->load_flag |= FC_LOADING;
vport->fc_flag |= FC_VPORT_NEEDS_REG_VPI;
/* Use the Physical nodes Fabric NDLP to determine if the link is
* up and ready to FDISC.
*/
ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
if (ndlp && NLP_CHK_NODE_ACT(ndlp)
&& ndlp->nlp_state == NLP_STE_UNMAPPED_NODE) {
if (phba->link_flag & LS_NPIV_FAB_SUPPORTED) {
lpfc_set_disctmo(vport);
lpfc_initial_fdisc(vport);
} else {
lpfc_vport_set_state(vport, FC_VPORT_NO_FABRIC_SUPP);
lpfc_printf_vlog(vport, KERN_ERR, LOG_ELS,
"0264 No NPIV Fabric support\n");
}
} else {
lpfc_vport_set_state(vport, FC_VPORT_FAILED);
}
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1827 Vport Enabled.\n");
return VPORT_OK;
}
int
lpfc_vport_disable(struct fc_vport *fc_vport, bool disable)
{
if (disable)
return disable_vport(fc_vport);
else
return enable_vport(fc_vport);
}
int
lpfc_vport_delete(struct fc_vport *fc_vport)
{
struct lpfc_nodelist *ndlp = NULL;
struct Scsi_Host *shost = (struct Scsi_Host *) fc_vport->shost;
struct lpfc_vport *vport = *(struct lpfc_vport **)fc_vport->dd_data;
struct lpfc_hba *phba = vport->phba;
long timeout;
if (vport->port_type == LPFC_PHYSICAL_PORT) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1812 vport_delete failed: Cannot delete "
"physical host\n");
return VPORT_ERROR;
}
/*
* If we are not unloading the driver then prevent the vport_delete
* from happening until after this vport's discovery is finished.
*/
if (!(phba->pport->load_flag & FC_UNLOADING)) {
int check_count = 0;
while (check_count < ((phba->fc_ratov * 3) + 3) &&
vport->port_state > LPFC_VPORT_FAILED &&
vport->port_state < LPFC_VPORT_READY) {
check_count++;
msleep(1000);
}
if (vport->port_state > LPFC_VPORT_FAILED &&
vport->port_state < LPFC_VPORT_READY)
return -EAGAIN;
}
/*
* This is a bit of a mess. We want to ensure the shost doesn't get
* torn down until we're done with the embedded lpfc_vport structure.
*
* Beyond holding a reference for this function, we also need a
* reference for outstanding I/O requests we schedule during delete
* processing. But once we scsi_remove_host() we can no longer obtain
* a reference through scsi_host_get().
*
* So we take two references here. We release one reference at the
* bottom of the function -- after delinking the vport. And we
* release the other at the completion of the unreg_vpi that get's
* initiated after we've disposed of all other resources associated
* with the port.
*/
if (!scsi_host_get(shost) || !scsi_host_get(shost))
return VPORT_INVAL;
spin_lock_irq(&phba->hbalock);
vport->load_flag |= FC_UNLOADING;
spin_unlock_irq(&phba->hbalock);
kfree(vport->vname);
lpfc_debugfs_terminate(vport);
fc_remove_host(lpfc_shost_from_vport(vport));
scsi_remove_host(lpfc_shost_from_vport(vport));
ndlp = lpfc_findnode_did(phba->pport, Fabric_DID);
/* In case of driver unload, we shall not perform fabric logo as the
* worker thread already stopped at this stage and, in this case, we
* can safely skip the fabric logo.
*/
if (phba->pport->load_flag & FC_UNLOADING) {
if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
phba->link_state >= LPFC_LINK_UP) {
/* First look for the Fabric ndlp */
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (!ndlp)
goto skip_logo;
else if (!NLP_CHK_NODE_ACT(ndlp)) {
ndlp = lpfc_enable_node(vport, ndlp,
NLP_STE_UNUSED_NODE);
if (!ndlp)
goto skip_logo;
}
/* Remove ndlp from vport npld list */
lpfc_dequeue_node(vport, ndlp);
/* Indicate free memory when release */
spin_lock_irq(&phba->ndlp_lock);
NLP_SET_FREE_REQ(ndlp);
spin_unlock_irq(&phba->ndlp_lock);
/* Kick off release ndlp when it can be safely done */
lpfc_nlp_put(ndlp);
}
goto skip_logo;
}
/* Otherwise, we will perform fabric logo as needed */
if (ndlp && NLP_CHK_NODE_ACT(ndlp) &&
ndlp->nlp_state == NLP_STE_UNMAPPED_NODE &&
[SCSI] lpfc 8.2.6 : Multiple discovery fixes Multiple Discovery Fixes: - Fix race on discovery due to link events coinciding with vport_delete. - Use NLP_FABRIC state to filter out switch-based pseudo initiators that reuse the same WWNs. - Correct erroneous setting of DID=0 in lpfc_matchdid() - Correct extra reference count that was in the lookup path for the remoteid from an unsolicited ELS. - Correct double-free bug in els abort path. - Correct FDMI server discovery logic for switch that return a WWN of 0. - Fix bugs in ndlp mgmt when a node changes address - Correct bug that did not delete RSCNs for vports upon link transitions - Fix "0216 Link event during NS query" error which pops up when vports are swapped to different switch ports. - Add sanity checks on ndlp structures - Fix devloss log message to dump WWN correctly - Hold off mgmt commands that were interferring with discovery mailbox cmds - Remove unnecessary FC_ESTABLISH_LINK logic. - Correct some race conditions in the worker thread, resulting in devloss: - Clear the work_port_events field before handling the work port events - Clear the deferred ring event before handling a deferred ring event - Hold the hba lock when waking up the work thread - Send an acc for the rscn even when we aren't going to handle it - Fix locking behavior that was not properly protecting the ACTIVE flag, thus allowing mailbox command order to shift. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 10:15:56 -04:00
phba->link_state >= LPFC_LINK_UP &&
phba->fc_topology != TOPOLOGY_LOOP) {
if (vport->cfg_enable_da_id) {
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
if (!lpfc_ns_cmd(vport, SLI_CTNS_DA_ID, 0, 0))
while (vport->ct_flags && timeout)
timeout = schedule_timeout(timeout);
else
lpfc_printf_log(vport->phba, KERN_WARNING,
LOG_VPORT,
"1829 CT command failed to "
"delete objects on fabric. \n");
}
/* First look for the Fabric ndlp */
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (!ndlp) {
/* Cannot find existing Fabric ndlp, allocate one */
ndlp = mempool_alloc(phba->nlp_mem_pool, GFP_KERNEL);
if (!ndlp)
goto skip_logo;
lpfc_nlp_init(vport, ndlp, Fabric_DID);
/* Indicate free memory when release */
NLP_SET_FREE_REQ(ndlp);
} else {
if (!NLP_CHK_NODE_ACT(ndlp))
ndlp = lpfc_enable_node(vport, ndlp,
NLP_STE_UNUSED_NODE);
if (!ndlp)
goto skip_logo;
/* Remove ndlp from vport npld list */
lpfc_dequeue_node(vport, ndlp);
spin_lock_irq(&phba->ndlp_lock);
if (!NLP_CHK_FREE_REQ(ndlp))
/* Indicate free memory when release */
NLP_SET_FREE_REQ(ndlp);
else {
/* Skip this if ndlp is already in free mode */
spin_unlock_irq(&phba->ndlp_lock);
goto skip_logo;
}
spin_unlock_irq(&phba->ndlp_lock);
}
vport->unreg_vpi_cmpl = VPORT_INVAL;
timeout = msecs_to_jiffies(phba->fc_ratov * 2000);
if (!lpfc_issue_els_npiv_logo(vport, ndlp))
while (vport->unreg_vpi_cmpl == VPORT_INVAL && timeout)
timeout = schedule_timeout(timeout);
}
skip_logo:
lpfc_cleanup(vport);
lpfc_sli_host_down(vport);
lpfc_stop_vport_timers(vport);
if (!(phba->pport->load_flag & FC_UNLOADING)) {
lpfc_unreg_all_rpis(vport);
lpfc_unreg_default_rpis(vport);
/*
* Completion of unreg_vpi (lpfc_mbx_cmpl_unreg_vpi)
* does the scsi_host_put() to release the vport.
*/
lpfc_mbx_unreg_vpi(vport);
}
lpfc_free_vpi(phba, vport->vpi);
vport->work_port_events = 0;
spin_lock_irq(&phba->hbalock);
list_del_init(&vport->listentry);
spin_unlock_irq(&phba->hbalock);
lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
"1828 Vport Deleted.\n");
scsi_host_put(shost);
return VPORT_OK;
}
struct lpfc_vport **
lpfc_create_vport_work_array(struct lpfc_hba *phba)
{
struct lpfc_vport *port_iterator;
struct lpfc_vport **vports;
int index = 0;
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 01:52:54 -05:00
vports = kzalloc((phba->max_vpi + 1) * sizeof(struct lpfc_vport *),
GFP_KERNEL);
if (vports == NULL)
return NULL;
spin_lock_irq(&phba->hbalock);
list_for_each_entry(port_iterator, &phba->port_list, listentry) {
if (!scsi_host_get(lpfc_shost_from_vport(port_iterator))) {
lpfc_printf_vlog(port_iterator, KERN_WARNING, LOG_VPORT,
"1801 Create vport work array FAILED: "
"cannot do scsi_host_get\n");
continue;
}
vports[index++] = port_iterator;
}
spin_unlock_irq(&phba->hbalock);
return vports;
}
void
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 01:52:54 -05:00
lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
{
int i;
if (vports == NULL)
return;
[SCSI] lpfc 8.2.4 : Miscellaneous Fixes Miscellaneous Fixes: - Fix a couple of sparse complaints - Reset the FCP recovery flag when the node is not a FCP2 device. - Speed up offline prep delays - Fixed a memory leak in lpfc_mem_alloc failure path - Fixed external loopback test. - Fixed error code returned from the driver when HBA is over heated. - Correct Max NPIV vport to limits read from adapter - Add missing locks around fc_flag and FC_NEEDS_REG_VPI - Add missing hba ids for device identification - Added support for SET_VARIABLE and MBX_WRITE_WWN mailbox commands - Changed all temperature event messages from warning to error - Fix reporting of link speed when link is down - Added support for MBX_WRITE_WWN mailbox command - Change del_timer_sync() in ISR to del_timer() in interrupt handler - Correct instances of beXX_to_cpu() that should be cpu_to_beXX() - Perform target flush before releasing node references on module unload - Avoid bogus devloss_tmo messages when driver unloads - Fix panic when HBA generates ERATT interupt - Fix mbox race condition and a workaround on back-to-back mailbox commands - Force NPIV off for pt2pt mode between 2 NPorts - Stop worker thread before removing fc_host. - Fix up discovery timeout error case due to missing clear_la - Tighten mailbox polling code to speed up detection of fast completions - Only allow DUMP_MEMORY if adapter offline due to overtemp errors - Added extended error information to the log messages in chip init. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11 01:52:54 -05:00
for (i=0; vports[i] != NULL && i <= phba->max_vpi; i++)
scsi_host_put(lpfc_shost_from_vport(vports[i]));
kfree(vports);
}