lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
b0fdfebb20
android_kernel_xiaomi_sm8350/drivers/net/saa9730.c

1185 lines
31 KiB
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* SAA9730 ethernet driver.
*
* Changes:
* Angelo Dell'Aera <buffer@antifork.org> : Conversion to the new PCI API (pci_driver).
* Conversion to spinlocks.
* Error handling fixes.
*
*/
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/delay.h>
#include <linux/etherdevice.h>
#include <linux/module.h>
#include <linux/skbuff.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <asm/addrspace.h>
#include <asm/mips-boards/prom.h>
#include "saa9730.h"
#ifdef LAN_SAA9730_DEBUG
int lan_saa9730_debug = LAN_SAA9730_DEBUG;
#else
int lan_saa9730_debug;
#endif
#define DRV_MODULE_NAME "saa9730"
static struct pci_device_id saa9730_pci_tbl[] = {
{ PCI_VENDOR_ID_PHILIPS, PCI_DEVICE_ID_PHILIPS_SAA9370,
PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
{ 0, }
};
MODULE_DEVICE_TABLE(pci, saa9730_pci_tbl);
/* Non-zero only if the current card is a PCI with BIOS-set IRQ. */
static unsigned int pci_irq_line;
#define INL(a) inl((unsigned long)a)
#define OUTL(x,a) outl(x,(unsigned long)a)
static void evm_saa9730_enable_lan_int(struct lan_saa9730_private *lp)
{
OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptBlock1);
OUTL(INL(&lp->evm_saa9730_regs->InterruptStatus1) | EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptStatus1);
OUTL(INL(&lp->evm_saa9730_regs->InterruptEnable1) | EVM_LAN_INT |
EVM_MASTER_EN, &lp->evm_saa9730_regs->InterruptEnable1);
}
static void evm_saa9730_disable_lan_int(struct lan_saa9730_private *lp)
{
OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptBlock1);
OUTL(INL(&lp->evm_saa9730_regs->InterruptEnable1) & ~EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptEnable1);
}
static void evm_saa9730_clear_lan_int(struct lan_saa9730_private *lp)
{
OUTL(EVM_LAN_INT, &lp->evm_saa9730_regs->InterruptStatus1);
}
static void evm_saa9730_block_lan_int(struct lan_saa9730_private *lp)
{
OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) & ~EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptBlock1);
}
static void evm_saa9730_unblock_lan_int(struct lan_saa9730_private *lp)
{
OUTL(INL(&lp->evm_saa9730_regs->InterruptBlock1) | EVM_LAN_INT,
&lp->evm_saa9730_regs->InterruptBlock1);
}
static void show_saa9730_regs(struct lan_saa9730_private *lp)
{
int i, j;
printk("TxmBufferA = %x\n", lp->TxmBuffer[0][0]);
printk("TxmBufferB = %x\n", lp->TxmBuffer[1][0]);
printk("RcvBufferA = %x\n", lp->RcvBuffer[0][0]);
printk("RcvBufferB = %x\n", lp->RcvBuffer[1][0]);
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
printk("TxmBuffer[%d][%d] = %x\n", i, j,
le32_to_cpu(*(unsigned int *)
lp->TxmBuffer[i][j]));
}
}
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
printk("RcvBuffer[%d][%d] = %x\n", i, j,
le32_to_cpu(*(unsigned int *)
lp->RcvBuffer[i][j]));
}
}
printk("lp->evm_saa9730_regs->InterruptBlock1 = %x\n",
INL(&lp->evm_saa9730_regs->InterruptBlock1));
printk("lp->evm_saa9730_regs->InterruptStatus1 = %x\n",
INL(&lp->evm_saa9730_regs->InterruptStatus1));
printk("lp->evm_saa9730_regs->InterruptEnable1 = %x\n",
INL(&lp->evm_saa9730_regs->InterruptEnable1));
printk("lp->lan_saa9730_regs->Ok2Use = %x\n",
INL(&lp->lan_saa9730_regs->Ok2Use));
printk("lp->NextTxmBufferIndex = %x\n", lp->NextTxmBufferIndex);
printk("lp->NextTxmPacketIndex = %x\n", lp->NextTxmPacketIndex);
printk("lp->PendingTxmBufferIndex = %x\n",
lp->PendingTxmBufferIndex);
printk("lp->PendingTxmPacketIndex = %x\n",
lp->PendingTxmPacketIndex);
printk("lp->lan_saa9730_regs->LanDmaCtl = %x\n",
INL(&lp->lan_saa9730_regs->LanDmaCtl));
printk("lp->lan_saa9730_regs->DmaStatus = %x\n",
INL(&lp->lan_saa9730_regs->DmaStatus));
printk("lp->lan_saa9730_regs->CamCtl = %x\n",
INL(&lp->lan_saa9730_regs->CamCtl));
printk("lp->lan_saa9730_regs->TxCtl = %x\n",
INL(&lp->lan_saa9730_regs->TxCtl));
printk("lp->lan_saa9730_regs->TxStatus = %x\n",
INL(&lp->lan_saa9730_regs->TxStatus));
printk("lp->lan_saa9730_regs->RxCtl = %x\n",
INL(&lp->lan_saa9730_regs->RxCtl));
printk("lp->lan_saa9730_regs->RxStatus = %x\n",
INL(&lp->lan_saa9730_regs->RxStatus));
for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
OUTL(i, &lp->lan_saa9730_regs->CamAddress);
printk("lp->lan_saa9730_regs->CamData = %x\n",
INL(&lp->lan_saa9730_regs->CamData));
}
printk("lp->stats.tx_packets = %lx\n", lp->stats.tx_packets);
printk("lp->stats.tx_errors = %lx\n", lp->stats.tx_errors);
printk("lp->stats.tx_aborted_errors = %lx\n",
lp->stats.tx_aborted_errors);
printk("lp->stats.tx_window_errors = %lx\n",
lp->stats.tx_window_errors);
printk("lp->stats.tx_carrier_errors = %lx\n",
lp->stats.tx_carrier_errors);
printk("lp->stats.tx_fifo_errors = %lx\n",
lp->stats.tx_fifo_errors);
printk("lp->stats.tx_heartbeat_errors = %lx\n",
lp->stats.tx_heartbeat_errors);
printk("lp->stats.collisions = %lx\n", lp->stats.collisions);
printk("lp->stats.rx_packets = %lx\n", lp->stats.rx_packets);
printk("lp->stats.rx_errors = %lx\n", lp->stats.rx_errors);
printk("lp->stats.rx_dropped = %lx\n", lp->stats.rx_dropped);
printk("lp->stats.rx_crc_errors = %lx\n", lp->stats.rx_crc_errors);
printk("lp->stats.rx_frame_errors = %lx\n",
lp->stats.rx_frame_errors);
printk("lp->stats.rx_fifo_errors = %lx\n",
lp->stats.rx_fifo_errors);
printk("lp->stats.rx_length_errors = %lx\n",
lp->stats.rx_length_errors);
printk("lp->lan_saa9730_regs->DebugPCIMasterAddr = %x\n",
INL(&lp->lan_saa9730_regs->DebugPCIMasterAddr));
printk("lp->lan_saa9730_regs->DebugLanTxStateMachine = %x\n",
INL(&lp->lan_saa9730_regs->DebugLanTxStateMachine));
printk("lp->lan_saa9730_regs->DebugLanRxStateMachine = %x\n",
INL(&lp->lan_saa9730_regs->DebugLanRxStateMachine));
printk("lp->lan_saa9730_regs->DebugLanTxFifoPointers = %x\n",
INL(&lp->lan_saa9730_regs->DebugLanTxFifoPointers));
printk("lp->lan_saa9730_regs->DebugLanRxFifoPointers = %x\n",
INL(&lp->lan_saa9730_regs->DebugLanRxFifoPointers));
printk("lp->lan_saa9730_regs->DebugLanCtlStateMachine = %x\n",
INL(&lp->lan_saa9730_regs->DebugLanCtlStateMachine));
}
static void lan_saa9730_buffer_init(struct lan_saa9730_private *lp)
{
int i, j;
/* Init RX buffers */
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
*(unsigned int *) lp->RcvBuffer[i][j] =
cpu_to_le32(RXSF_READY <<
RX_STAT_CTL_OWNER_SHF);
}
}
/* Init TX buffers */
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
*(unsigned int *) lp->TxmBuffer[i][j] =
cpu_to_le32(TXSF_EMPTY <<
TX_STAT_CTL_OWNER_SHF);
}
}
}
static int lan_saa9730_allocate_buffers(struct lan_saa9730_private *lp)
{
unsigned int mem_size;
void *Pa;
unsigned int i, j, RcvBufferSize, TxmBufferSize;
unsigned int buffer_start;
/*
* Allocate all RX and TX packets in one chunk.
* The Rx and Tx packets must be PACKET_SIZE aligned.
*/
mem_size = ((LAN_SAA9730_RCV_Q_SIZE + LAN_SAA9730_TXM_Q_SIZE) *
LAN_SAA9730_PACKET_SIZE * LAN_SAA9730_BUFFERS) +
LAN_SAA9730_PACKET_SIZE;
buffer_start =
(unsigned int) kmalloc(mem_size, GFP_DMA | GFP_KERNEL);
if (!buffer_start)
return -ENOMEM;
/*
* Set DMA buffer to kseg1 (uncached).
* Make sure to flush before using it uncached.
*/
Pa = (void *) KSEG1ADDR((buffer_start + LAN_SAA9730_PACKET_SIZE) &
~(LAN_SAA9730_PACKET_SIZE - 1));
dma_cache_wback_inv((unsigned long) Pa, mem_size);
/* Initialize buffer space */
RcvBufferSize = LAN_SAA9730_PACKET_SIZE;
TxmBufferSize = LAN_SAA9730_PACKET_SIZE;
lp->DmaRcvPackets = LAN_SAA9730_RCV_Q_SIZE;
lp->DmaTxmPackets = LAN_SAA9730_TXM_Q_SIZE;
/* Init RX buffers */
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
for (j = 0; j < LAN_SAA9730_RCV_Q_SIZE; j++) {
*(unsigned int *) Pa =
cpu_to_le32(RXSF_READY <<
RX_STAT_CTL_OWNER_SHF);
lp->RcvBuffer[i][j] = (unsigned int) Pa;
Pa += RcvBufferSize;
}
}
/* Init TX buffers */
for (i = 0; i < LAN_SAA9730_BUFFERS; i++) {
for (j = 0; j < LAN_SAA9730_TXM_Q_SIZE; j++) {
*(unsigned int *) Pa =
cpu_to_le32(TXSF_EMPTY <<
TX_STAT_CTL_OWNER_SHF);
lp->TxmBuffer[i][j] = (unsigned int) Pa;
Pa += TxmBufferSize;
}
}
/*
* Set rx buffer A and rx buffer B to point to the first two buffer
* spaces.
*/
OUTL(PHYSADDR(lp->RcvBuffer[0][0]),
&lp->lan_saa9730_regs->RxBuffA);
OUTL(PHYSADDR(lp->RcvBuffer[1][0]),
&lp->lan_saa9730_regs->RxBuffB);
/* Initialize Buffer Index */
lp->NextRcvPacketIndex = 0;
lp->NextRcvToUseIsA = 1;
/* Set current buffer index & next availble packet index */
lp->NextTxmPacketIndex = 0;
lp->NextTxmBufferIndex = 0;
lp->PendingTxmPacketIndex = 0;
lp->PendingTxmBufferIndex = 0;
/*
* Set txm_buf_a and txm_buf_b to point to the first two buffer
* space
*/
OUTL(PHYSADDR(lp->TxmBuffer[0][0]),
&lp->lan_saa9730_regs->TxBuffA);
OUTL(PHYSADDR(lp->TxmBuffer[1][0]),
&lp->lan_saa9730_regs->TxBuffB);
/* Set packet number */
OUTL((lp->DmaRcvPackets << PK_COUNT_RX_A_SHF) |
(lp->DmaRcvPackets << PK_COUNT_RX_B_SHF) |
(lp->DmaTxmPackets << PK_COUNT_TX_A_SHF) |
(lp->DmaTxmPackets << PK_COUNT_TX_B_SHF),
&lp->lan_saa9730_regs->PacketCount);
return 0;
}
static int lan_saa9730_cam_load(struct lan_saa9730_private *lp)
{
unsigned int i;
unsigned char *NetworkAddress;
NetworkAddress = (unsigned char *) &lp->PhysicalAddress[0][0];
for (i = 0; i < LAN_SAA9730_CAM_DWORDS; i++) {
/* First set address to where data is written */
OUTL(i, &lp->lan_saa9730_regs->CamAddress);
OUTL((NetworkAddress[0] << 24) | (NetworkAddress[1] << 16)
| (NetworkAddress[2] << 8) | NetworkAddress[3],
&lp->lan_saa9730_regs->CamData);
NetworkAddress += 4;
}
return 0;
}
static int lan_saa9730_cam_init(struct net_device *dev)
{
struct lan_saa9730_private *lp =
(struct lan_saa9730_private *) dev->priv;
unsigned int i;
/* Copy MAC-address into all entries. */
for (i = 0; i < LAN_SAA9730_CAM_ENTRIES; i++) {
memcpy((unsigned char *) lp->PhysicalAddress[i],
(unsigned char *) dev->dev_addr, 6);
}
return 0;
}
static int lan_saa9730_mii_init(struct lan_saa9730_private *lp)
{
int i, l;
/* Check link status, spin here till station is not busy. */
i = 0;
while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
i++;
if (i > 100) {
printk("Error: lan_saa9730_mii_init: timeout\n");
return -1;
}
mdelay(1); /* wait 1 ms. */
}
/* Now set the control and address register. */
OUTL(MD_CA_BUSY | PHY_STATUS | PHY_ADDRESS << MD_CA_PHY_SHF,
&lp->lan_saa9730_regs->StationMgmtCtl);
/* check link status, spin here till station is not busy */
i = 0;
while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) & MD_CA_BUSY) {
i++;
if (i > 100) {
printk("Error: lan_saa9730_mii_init: timeout\n");
return -1;
}
mdelay(1); /* wait 1 ms. */
}
/* Wait for 1 ms. */
mdelay(1);
/* Check the link status. */
if (INL(&lp->lan_saa9730_regs->StationMgmtData) &
PHY_STATUS_LINK_UP) {
/* Link is up. */
return 0;
} else {
/* Link is down, reset the PHY first. */
/* set PHY address = 'CONTROL' */
OUTL(PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR | PHY_CONTROL,
&lp->lan_saa9730_regs->StationMgmtCtl);
/* Wait for 1 ms. */
mdelay(1);
/* set 'CONTROL' = force reset and renegotiate */
OUTL(PHY_CONTROL_RESET | PHY_CONTROL_AUTO_NEG |
PHY_CONTROL_RESTART_AUTO_NEG,
&lp->lan_saa9730_regs->StationMgmtData);
/* Wait for 50 ms. */
mdelay(50);
/* set 'BUSY' to start operation */
OUTL(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF | MD_CA_WR |
PHY_CONTROL, &lp->lan_saa9730_regs->StationMgmtCtl);
/* await completion */
i = 0;
while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) &
MD_CA_BUSY) {
i++;
if (i > 100) {
printk
("Error: lan_saa9730_mii_init: timeout\n");
return -1;
}
mdelay(1); /* wait 1 ms. */
}
/* Wait for 1 ms. */
mdelay(1);
for (l = 0; l < 2; l++) {
/* set PHY address = 'STATUS' */
OUTL(MD_CA_BUSY | PHY_ADDRESS << MD_CA_PHY_SHF |
PHY_STATUS,
&lp->lan_saa9730_regs->StationMgmtCtl);
/* await completion */
i = 0;
while (INL(&lp->lan_saa9730_regs->StationMgmtCtl) &
MD_CA_BUSY) {
i++;
if (i > 100) {
printk
("Error: lan_saa9730_mii_init: timeout\n");
return -1;
}
mdelay(1); /* wait 1 ms. */
}
/* wait for 3 sec. */
mdelay(3000);
/* check the link status */
if (INL(&lp->lan_saa9730_regs->StationMgmtData) &
PHY_STATUS_LINK_UP) {
/* link is up */
break;
}
}
}
return 0;
}
static int lan_saa9730_control_init(struct lan_saa9730_private *lp)
{
/* Initialize DMA control register. */
OUTL((LANMB_ANY << DMA_CTL_MAX_XFER_SHF) |
(LANEND_LITTLE << DMA_CTL_ENDIAN_SHF) |
(LAN_SAA9730_RCV_Q_INT_THRESHOLD << DMA_CTL_RX_INT_COUNT_SHF)
| DMA_CTL_RX_INT_TO_EN | DMA_CTL_RX_INT_EN |
DMA_CTL_MAC_RX_INT_EN | DMA_CTL_MAC_TX_INT_EN,
&lp->lan_saa9730_regs->LanDmaCtl);
/* Initial MAC control register. */
OUTL((MACCM_MII << MAC_CONTROL_CONN_SHF) | MAC_CONTROL_FULL_DUP,
&lp->lan_saa9730_regs->MacCtl);
/* Initialize CAM control register. */
OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_BROAD_ACC,
&lp->lan_saa9730_regs->CamCtl);
/*
* Initialize CAM enable register, only turn on first entry, should
* contain own addr.
*/
OUTL(0x0001, &lp->lan_saa9730_regs->CamEnable);
/* Initialize Tx control register */
OUTL(TX_CTL_EN_COMP, &lp->lan_saa9730_regs->TxCtl);
/* Initialize Rcv control register */
OUTL(RX_CTL_STRIP_CRC, &lp->lan_saa9730_regs->RxCtl);
/* Reset DMA engine */
OUTL(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
return 0;
}
static int lan_saa9730_stop(struct lan_saa9730_private *lp)
{
int i;
/* Stop DMA first */
OUTL(INL(&lp->lan_saa9730_regs->LanDmaCtl) &
~(DMA_CTL_EN_TX_DMA | DMA_CTL_EN_RX_DMA),
&lp->lan_saa9730_regs->LanDmaCtl);
/* Set the SW Reset bits in DMA and MAC control registers */
OUTL(DMA_TEST_SW_RESET, &lp->lan_saa9730_regs->DmaTest);
OUTL(INL(&lp->lan_saa9730_regs->MacCtl) | MAC_CONTROL_RESET,
&lp->lan_saa9730_regs->MacCtl);
/*
* Wait for MAC reset to have finished. The reset bit is auto cleared
* when the reset is done.
*/
i = 0;
while (INL(&lp->lan_saa9730_regs->MacCtl) & MAC_CONTROL_RESET) {
i++;
if (i > 100) {
printk
("Error: lan_sa9730_stop: MAC reset timeout\n");
return -1;
}
mdelay(1); /* wait 1 ms. */
}
return 0;
}
static int lan_saa9730_dma_init(struct lan_saa9730_private *lp)
{
/* Stop lan controller. */
lan_saa9730_stop(lp);
OUTL(LAN_SAA9730_DEFAULT_TIME_OUT_CNT,
&lp->lan_saa9730_regs->Timeout);
return 0;
}
static int lan_saa9730_start(struct lan_saa9730_private *lp)
{
lan_saa9730_buffer_init(lp);
/* Initialize Rx Buffer Index */
lp->NextRcvPacketIndex = 0;
lp->NextRcvToUseIsA = 1;
/* Set current buffer index & next availble packet index */
lp->NextTxmPacketIndex = 0;
lp->NextTxmBufferIndex = 0;
lp->PendingTxmPacketIndex = 0;
lp->PendingTxmBufferIndex = 0;
OUTL(INL(&lp->lan_saa9730_regs->LanDmaCtl) | DMA_CTL_EN_TX_DMA |
DMA_CTL_EN_RX_DMA, &lp->lan_saa9730_regs->LanDmaCtl);
/* For Tx, turn on MAC then DMA */
OUTL(INL(&lp->lan_saa9730_regs->TxCtl) | TX_CTL_TX_EN,
&lp->lan_saa9730_regs->TxCtl);
/* For Rx, turn on DMA then MAC */
OUTL(INL(&lp->lan_saa9730_regs->RxCtl) | RX_CTL_RX_EN,
&lp->lan_saa9730_regs->RxCtl);
/* Set Ok2Use to let hardware owns the buffers */
OUTL(OK2USE_RX_A | OK2USE_RX_B | OK2USE_TX_A | OK2USE_TX_B,
&lp->lan_saa9730_regs->Ok2Use);
return 0;
}
static int lan_saa9730_restart(struct lan_saa9730_private *lp)
{
lan_saa9730_stop(lp);
lan_saa9730_start(lp);
return 0;
}
static int lan_saa9730_tx(struct net_device *dev)
{
struct lan_saa9730_private *lp =
(struct lan_saa9730_private *) dev->priv;
unsigned int *pPacket;
unsigned int tx_status;
if (lan_saa9730_debug > 5)
printk("lan_saa9730_tx interrupt\n");
/* Clear interrupt. */
OUTL(DMA_STATUS_MAC_TX_INT, &lp->lan_saa9730_regs->DmaStatus);
while (1) {
pPacket =
(unsigned int *) lp->TxmBuffer[lp->
PendingTxmBufferIndex]
[lp->PendingTxmPacketIndex];
/* Get status of first packet transmitted. */
tx_status = le32_to_cpu(*pPacket);
/* Check ownership. */
if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
(TXSF_HWDONE << TX_STAT_CTL_OWNER_SHF)) break;
/* Check for error. */
if (tx_status & TX_STAT_CTL_ERROR_MSK) {
if (lan_saa9730_debug > 1)
printk("lan_saa9730_tx: tx error = %x\n",
tx_status);
lp->stats.tx_errors++;
if (tx_status &
(TX_STATUS_EX_COLL << TX_STAT_CTL_STATUS_SHF))
lp->stats.tx_aborted_errors++;
if (tx_status &
(TX_STATUS_LATE_COLL <<
TX_STAT_CTL_STATUS_SHF)) lp->stats.
tx_window_errors++;
if (tx_status &
(TX_STATUS_L_CARR << TX_STAT_CTL_STATUS_SHF))
lp->stats.tx_carrier_errors++;
if (tx_status &
(TX_STATUS_UNDER << TX_STAT_CTL_STATUS_SHF))
lp->stats.tx_fifo_errors++;
if (tx_status &
(TX_STATUS_SQ_ERR << TX_STAT_CTL_STATUS_SHF))
lp->stats.tx_heartbeat_errors++;
lp->stats.collisions +=
tx_status & TX_STATUS_TX_COLL_MSK;
}
/* Free buffer. */
*pPacket =
cpu_to_le32(TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF);
/* Update pending index pointer. */
lp->PendingTxmPacketIndex++;
if (lp->PendingTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
lp->PendingTxmPacketIndex = 0;
lp->PendingTxmBufferIndex ^= 1;
}
}
/* Make sure A and B are available to hardware. */
OUTL(OK2USE_TX_A | OK2USE_TX_B, &lp->lan_saa9730_regs->Ok2Use);
if (netif_queue_stopped(dev)) {
/* The tx buffer is no longer full. */
netif_wake_queue(dev);
}
return 0;
}
static int lan_saa9730_rx(struct net_device *dev)
{
struct lan_saa9730_private *lp =
(struct lan_saa9730_private *) dev->priv;
int len = 0;
struct sk_buff *skb = 0;
unsigned int rx_status;
int BufferIndex;
int PacketIndex;
unsigned int *pPacket;
unsigned char *pData;
if (lan_saa9730_debug > 5)
printk("lan_saa9730_rx interrupt\n");
/* Clear receive interrupts. */
OUTL(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
DMA_STATUS_RX_TO_INT, &lp->lan_saa9730_regs->DmaStatus);
/* Address next packet */
if (lp->NextRcvToUseIsA)
BufferIndex = 0;
else
BufferIndex = 1;
PacketIndex = lp->NextRcvPacketIndex;
pPacket = (unsigned int *) lp->RcvBuffer[BufferIndex][PacketIndex];
rx_status = le32_to_cpu(*pPacket);
/* Process each packet. */
while ((rx_status & RX_STAT_CTL_OWNER_MSK) ==
(RXSF_HWDONE << RX_STAT_CTL_OWNER_SHF)) {
/* Check the rx status. */
if (rx_status & (RX_STATUS_GOOD << RX_STAT_CTL_STATUS_SHF)) {
/* Received packet is good. */
len = (rx_status & RX_STAT_CTL_LENGTH_MSK) >>
RX_STAT_CTL_LENGTH_SHF;
pData = (unsigned char *) pPacket;
pData += 4;
skb = dev_alloc_skb(len + 2);
if (skb == 0) {
printk
("%s: Memory squeeze, deferring packet.\n",
dev->name);
lp->stats.rx_dropped++;
} else {
lp->stats.rx_bytes += len;
lp->stats.rx_packets++;
skb->dev = dev;
skb_reserve(skb, 2); /* 16 byte align */
skb_put(skb, len); /* make room */
eth_copy_and_sum(skb,
(unsigned char *) pData,
len, 0);
skb->protocol = eth_type_trans(skb, dev);
netif_rx(skb);
dev->last_rx = jiffies;
}
} else {
/* We got an error packet. */
if (lan_saa9730_debug > 2)
printk
("lan_saa9730_rx: We got an error packet = %x\n",
rx_status);
lp->stats.rx_errors++;
if (rx_status &
(RX_STATUS_CRC_ERR << RX_STAT_CTL_STATUS_SHF))
lp->stats.rx_crc_errors++;
if (rx_status &
(RX_STATUS_ALIGN_ERR <<
RX_STAT_CTL_STATUS_SHF)) lp->stats.
rx_frame_errors++;
if (rx_status &
(RX_STATUS_OVERFLOW << RX_STAT_CTL_STATUS_SHF))
lp->stats.rx_fifo_errors++;
if (rx_status &
(RX_STATUS_LONG_ERR << RX_STAT_CTL_STATUS_SHF))
lp->stats.rx_length_errors++;
}
/* Indicate we have processed the buffer. */
*pPacket =
cpu_to_le32(RXSF_READY << RX_STAT_CTL_OWNER_SHF);
/* Go to next packet in sequence. */
lp->NextRcvPacketIndex++;
if (lp->NextRcvPacketIndex >= LAN_SAA9730_RCV_Q_SIZE) {
lp->NextRcvPacketIndex = 0;
if (BufferIndex) {
lp->NextRcvToUseIsA = 1;
} else {
lp->NextRcvToUseIsA = 0;
}
}
OUTL(OK2USE_RX_A | OK2USE_RX_B,
&lp->lan_saa9730_regs->Ok2Use);
/* Address next packet */
if (lp->NextRcvToUseIsA)
BufferIndex = 0;
else
BufferIndex = 1;
PacketIndex = lp->NextRcvPacketIndex;
pPacket =
(unsigned int *) lp->
RcvBuffer[BufferIndex][PacketIndex];
rx_status = le32_to_cpu(*pPacket);
}
/* Make sure A and B are available to hardware. */
OUTL(OK2USE_RX_A | OK2USE_RX_B, &lp->lan_saa9730_regs->Ok2Use);
return 0;
}
static irqreturn_t lan_saa9730_interrupt(const int irq, void *dev_id,
struct pt_regs *regs)
{
struct net_device *dev = (struct net_device *) dev_id;
struct lan_saa9730_private *lp =
(struct lan_saa9730_private *) dev->priv;
if (lan_saa9730_debug > 5)
printk("lan_saa9730_interrupt\n");
/* Disable the EVM LAN interrupt. */
evm_saa9730_block_lan_int(lp);
/* Clear the EVM LAN interrupt. */
evm_saa9730_clear_lan_int(lp);
/* Service pending transmit interrupts. */
if (INL(&lp->lan_saa9730_regs->DmaStatus) & DMA_STATUS_MAC_TX_INT)
lan_saa9730_tx(dev);
/* Service pending receive interrupts. */
if (INL(&lp->lan_saa9730_regs->DmaStatus) &
(DMA_STATUS_MAC_RX_INT | DMA_STATUS_RX_INT |
DMA_STATUS_RX_TO_INT)) lan_saa9730_rx(dev);
/* Enable the EVM LAN interrupt. */
evm_saa9730_unblock_lan_int(lp);
return IRQ_HANDLED;
}
static int lan_saa9730_open_fail(struct net_device *dev)
{
return -ENODEV;
}
static int lan_saa9730_open(struct net_device *dev)
{
struct lan_saa9730_private *lp =
(struct lan_saa9730_private *) dev->priv;
/* Associate IRQ with lan_saa9730_interrupt */
if (request_irq(dev->irq, &lan_saa9730_interrupt, 0, "SAA9730 Eth",
dev)) {
printk("lan_saa9730_open: Can't get irq %d\n", dev->irq);
return -EAGAIN;
}
/* Enable the Lan interrupt in the event manager. */
evm_saa9730_enable_lan_int(lp);
/* Start the LAN controller */
if (lan_saa9730_start(lp))
return -1;
netif_start_queue(dev);
return 0;
}
static int lan_saa9730_write(struct lan_saa9730_private *lp,
struct sk_buff *skb, int skblen)
{
unsigned char *pbData = skb->data;
unsigned int len = skblen;
unsigned char *pbPacketData;
unsigned int tx_status;
int BufferIndex;
int PacketIndex;
if (lan_saa9730_debug > 5)
printk("lan_saa9730_write: skb=%08x\n",
(unsigned int) skb);
BufferIndex = lp->NextTxmBufferIndex;
PacketIndex = lp->NextTxmPacketIndex;
tx_status =
le32_to_cpu(*(unsigned int *) lp->
TxmBuffer[BufferIndex][PacketIndex]);
if ((tx_status & TX_STAT_CTL_OWNER_MSK) !=
(TXSF_EMPTY << TX_STAT_CTL_OWNER_SHF)) {
if (lan_saa9730_debug > 4)
printk
("lan_saa9730_write: Tx buffer not available: tx_status = %x\n",
tx_status);
return -1;
}
lp->NextTxmPacketIndex++;
if (lp->NextTxmPacketIndex >= LAN_SAA9730_TXM_Q_SIZE) {
lp->NextTxmPacketIndex = 0;
lp->NextTxmBufferIndex ^= 1;
}
pbPacketData =
(unsigned char *) lp->TxmBuffer[BufferIndex][PacketIndex];
pbPacketData += 4;
/* copy the bits */
memcpy(pbPacketData, pbData, len);
/* Set transmit status for hardware */
*(unsigned int *) lp->TxmBuffer[BufferIndex][PacketIndex] =
cpu_to_le32((TXSF_READY << TX_STAT_CTL_OWNER_SHF) |
(TX_STAT_CTL_INT_AFTER_TX << TX_STAT_CTL_FRAME_SHF)
| (len << TX_STAT_CTL_LENGTH_SHF));
/* Set hardware tx buffer. */
OUTL(OK2USE_TX_A | OK2USE_TX_B, &lp->lan_saa9730_regs->Ok2Use);
return 0;
}
static void lan_saa9730_tx_timeout(struct net_device *dev)
{
struct lan_saa9730_private *lp =
(struct lan_saa9730_private *) dev->priv;
/* Transmitter timeout, serious problems */
lp->stats.tx_errors++;
printk("%s: transmit timed out, reset\n", dev->name);
/*show_saa9730_regs(lp); */
lan_saa9730_restart(lp);
dev->trans_start = jiffies;
netif_start_queue(dev);
}
static int lan_saa9730_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
struct lan_saa9730_private *lp =
(struct lan_saa9730_private *) dev->priv;
unsigned long flags;
int skblen;
int len;
if (lan_saa9730_debug > 4)
printk("Send packet: skb=%08x\n", (unsigned int) skb);
skblen = skb->len;
spin_lock_irqsave(&lp->lock, flags);
len = (skblen <= ETH_ZLEN) ? ETH_ZLEN : skblen;
if (lan_saa9730_write(lp, skb, skblen)) {
spin_unlock_irqrestore(&lp->lock, flags);
printk("Error when writing packet to controller: skb=%08x\n",
(unsigned int) skb);
netif_stop_queue(dev);
return -1;
}
lp->stats.tx_bytes += len;
lp->stats.tx_packets++;
dev->trans_start = jiffies;
netif_start_queue(dev);
dev_kfree_skb(skb);
spin_unlock_irqrestore(&lp->lock, flags);
return 0;
}
static int lan_saa9730_close(struct net_device *dev)
{
struct lan_saa9730_private *lp =
(struct lan_saa9730_private *) dev->priv;
if (lan_saa9730_debug > 1)
printk("lan_saa9730_close:\n");
netif_stop_queue(dev);
/* Disable the Lan interrupt in the event manager. */
evm_saa9730_disable_lan_int(lp);
/* Stop the controller */
if (lan_saa9730_stop(lp))
return -1;
free_irq(dev->irq, (void *) dev);
return 0;
}
static struct net_device_stats *lan_saa9730_get_stats(struct net_device
*dev)
{
struct lan_saa9730_private *lp =
(struct lan_saa9730_private *) dev->priv;
return &lp->stats;
}
static void lan_saa9730_set_multicast(struct net_device *dev)
{
struct lan_saa9730_private *lp =
(struct lan_saa9730_private *) dev->priv;
/* Stop the controller */
lan_saa9730_stop(lp);
if (dev->flags & IFF_PROMISC) {
/* accept all packets */
OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_STATION_ACC |
CAM_CONTROL_GROUP_ACC | CAM_CONTROL_BROAD_ACC,
&lp->lan_saa9730_regs->CamCtl);
} else {
if (dev->flags & IFF_ALLMULTI) {
/* accept all multicast packets */
OUTL(CAM_CONTROL_COMP_EN | CAM_CONTROL_GROUP_ACC |
CAM_CONTROL_BROAD_ACC,
&lp->lan_saa9730_regs->CamCtl);
} else {
/*
* Will handle the multicast stuff later. -carstenl
*/
}
}
lan_saa9730_restart(lp);
}
static void __devexit saa9730_remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
if (dev) {
unregister_netdev(dev);
if (dev->priv)
kfree(dev->priv);
free_netdev(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
}
}
static int lan_saa9730_init(struct net_device *dev, int ioaddr, int irq)
{
struct lan_saa9730_private *lp;
unsigned char ethernet_addr[6];
int ret = 0;
dev->open = lan_saa9730_open_fail;
if (get_ethernet_addr(ethernet_addr))
return -ENODEV;
memcpy(dev->dev_addr, ethernet_addr, 6);
dev->base_addr = ioaddr;
dev->irq = irq;
/*
* Make certain the data structures used by the controller are aligned
* and DMAble.
*/
/*
* XXX: that is obviously broken - kfree() won't be happy with us.
*/
lp = (struct lan_saa9730_private *) (((unsigned long)
kmalloc(sizeof(*lp) + 7,
GFP_DMA | GFP_KERNEL)
+ 7) & ~7);
if (!lp)
return -ENOMEM;
dev->priv = lp;
memset(lp, 0, sizeof(*lp));
/* Set SAA9730 LAN base address. */
lp->lan_saa9730_regs = (t_lan_saa9730_regmap *) (ioaddr +
SAA9730_LAN_REGS_ADDR);
/* Set SAA9730 EVM base address. */
lp->evm_saa9730_regs = (t_evm_saa9730_regmap *) (ioaddr +
SAA9730_EVM_REGS_ADDR);
/* Allocate LAN RX/TX frame buffer space. */
/* FIXME: a leak */
if ((ret = lan_saa9730_allocate_buffers(lp)))
goto out;
/* Stop LAN controller. */
if ((ret = lan_saa9730_stop(lp)))
goto out;
/* Initialize CAM registers. */
if ((ret = lan_saa9730_cam_init(dev)))
goto out;
/* Initialize MII registers. */
if ((ret = lan_saa9730_mii_init(lp)))
goto out;
/* Initialize control registers. */
if ((ret = lan_saa9730_control_init(lp)))
goto out;
/* Load CAM registers. */
if ((ret = lan_saa9730_cam_load(lp)))
goto out;
/* Initialize DMA context registers. */
if ((ret = lan_saa9730_dma_init(lp)))
goto out;
spin_lock_init(&lp->lock);
dev->open = lan_saa9730_open;
dev->hard_start_xmit = lan_saa9730_start_xmit;
dev->stop = lan_saa9730_close;
dev->get_stats = lan_saa9730_get_stats;
dev->set_multicast_list = lan_saa9730_set_multicast;
dev->tx_timeout = lan_saa9730_tx_timeout;
dev->watchdog_timeo = (HZ >> 1);
dev->dma = 0;
ret = register_netdev(dev);
if (ret)
goto out;
return 0;
out:
if (dev->priv)
kfree(dev->priv);
return ret;
}
static int __devinit saa9730_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct net_device *dev;
unsigned int pci_ioaddr;
int err;
if (lan_saa9730_debug > 1)
printk("saa9730.c: PCI bios is present, checking for devices...\n");
err = -ENOMEM;
dev = alloc_etherdev(0);
if (!dev)
goto out;
SET_MODULE_OWNER(dev);
err = pci_enable_device(pdev);
if (err) {
printk(KERN_ERR "Cannot enable PCI device, aborting.\n");
goto out1;
}
err = pci_request_regions(pdev, DRV_MODULE_NAME);
if (err) {
printk(KERN_ERR "Cannot obtain PCI resources, aborting.\n");
goto out2;
}
pci_irq_line = pdev->irq;
/* LAN base address in located at BAR 1. */
pci_ioaddr = pci_resource_start(pdev, 1);
pci_set_master(pdev);
printk("Found SAA9730 (PCI) at %#x, irq %d.\n",
pci_ioaddr, pci_irq_line);
err = lan_saa9730_init(dev, pci_ioaddr, pci_irq_line);
if (err) {
printk("Lan init failed");
goto out2;
}
pci_set_drvdata(pdev, dev);
SET_NETDEV_DEV(dev, &pdev->dev);
return 0;
out2:
pci_disable_device(pdev);
out1:
free_netdev(dev);
out:
return err;
}
static struct pci_driver saa9730_driver = {
.name = DRV_MODULE_NAME,
.id_table = saa9730_pci_tbl,
.probe = saa9730_init_one,
.remove = __devexit_p(saa9730_remove_one),
};
static int __init saa9730_init(void)
{
return pci_module_init(&saa9730_driver);
}
static void __exit saa9730_cleanup(void)
{
pci_unregister_driver(&saa9730_driver);
}
module_init(saa9730_init);
module_exit(saa9730_cleanup);
MODULE_LICENSE("GPL");
Reference in New Issue Copy Permalink