android_kernel_xiaomi_sm8350/include/asm-powerpc/paca.h

113 lines
3.5 KiB
C
Raw Normal View History

/*
* include/asm-powerpc/paca.h
*
* This control block defines the PACA which defines the processor
* specific data for each logical processor on the system.
* There are some pointers defined that are utilized by PLIC.
*
* C 2001 PPC 64 Team, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ASM_POWERPC_PACA_H
#define _ASM_POWERPC_PACA_H
#ifdef __KERNEL__
#include <asm/types.h>
#include <asm/lppaca.h>
#include <asm/mmu.h>
register struct paca_struct *local_paca asm("r13");
#define get_paca() local_paca
#define get_lppaca() (get_paca()->lppaca_ptr)
#define get_slb_shadow() (get_paca()->slb_shadow_ptr)
struct task_struct;
/*
* Defines the layout of the paca.
*
* This structure is not directly accessed by firmware or the service
* processor except for the first two pointers that point to the
* lppaca area and the ItLpRegSave area for this CPU. The lppaca
* object is currently contained within the PACA but it doesn't need
* to be.
*/
struct paca_struct {
/*
* Because hw_cpu_id, unlike other paca fields, is accessed
* routinely from other CPUs (from the IRQ code), we stick to
* read-only (after boot) fields in the first cacheline to
* avoid cacheline bouncing.
*/
/*
* MAGIC: These first two pointers can't be moved - they're
* accessed by the firmware
*/
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
#ifdef CONFIG_PPC_ISERIES
void *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
#endif /* CONFIG_PPC_ISERIES */
/*
* MAGIC: the spinlock functions in arch/powerpc/lib/locks.c
* load lock_token and paca_index with a single lwz
* instruction. They must travel together and be properly
* aligned.
*/
u16 lock_token; /* Constant 0x8000, used in locks */
u16 paca_index; /* Logical processor number */
u64 kernel_toc; /* Kernel TOC address */
u64 stab_real; /* Absolute address of segment table */
u64 stab_addr; /* Virtual address of segment table */
void *emergency_sp; /* pointer to emergency stack */
[PATCH] powerpc/64: per cpu data optimisations The current ppc64 per cpu data implementation is quite slow. eg: lhz 11,18(13) /* smp_processor_id() */ ld 9,.LC63-.LCTOC1(30) /* per_cpu__variable_name */ ld 8,.LC61-.LCTOC1(30) /* __per_cpu_offset */ sldi 11,11,3 /* form index into __per_cpu_offset */ mr 10,9 ldx 9,11,8 /* __per_cpu_offset[smp_processor_id()] */ ldx 0,10,9 /* load per cpu data */ 5 loads for something that is supposed to be fast, pretty awful. One reason for the large number of loads is that we have to synthesize 2 64bit constants (per_cpu__variable_name and __per_cpu_offset). By putting __per_cpu_offset into the paca we can avoid the 2 loads associated with it: ld 11,56(13) /* paca->data_offset */ ld 9,.LC59-.LCTOC1(30) /* per_cpu__variable_name */ ldx 0,9,11 /* load per cpu data Longer term we can should be able to do even better than 3 loads. If per_cpu__variable_name wasnt a 64bit constant and paca->data_offset was in a register we could cut it down to one load. A suggestion from Rusty is to use gcc's __thread extension here. In order to do this we would need to free up r13 (the __thread register and where the paca currently is). So far Ive had a few unsuccessful attempts at doing that :) The patch also allocates per cpu memory node local on NUMA machines. This patch from Rusty has been sitting in my queue _forever_ but stalled when I hit the compiler bug. Sorry about that. Finally I also only allocate per cpu data for possible cpus, which comes straight out of the x86-64 port. On a pseries kernel (with NR_CPUS == 128) and 4 possible cpus we see some nice gains: total used free shared buffers cached Mem: 4012228 212860 3799368 0 0 162424 total used free shared buffers cached Mem: 4016200 212984 3803216 0 0 162424 A saving of 3.75MB. Quite nice for smaller machines. Note: we now have to be careful of per cpu users that touch data for !possible cpus. At this stage it might be worth making the NUMA and possible cpu optimisations generic, but per cpu init is done so early we have to be careful that all architectures have their possible map setup correctly. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-10 21:16:44 -05:00
u64 data_offset; /* per cpu data offset */
s16 hw_cpu_id; /* Physical processor number */
u8 cpu_start; /* At startup, processor spins until */
/* this becomes non-zero. */
/*
* Now, starting in cacheline 2, the exception save areas
*/
/* used for most interrupts/exceptions */
u64 exgen[10] __attribute__((aligned(0x80)));
u64 exmc[10]; /* used for machine checks */
u64 exslb[10]; /* used for SLB/segment table misses
* on the linear mapping */
mm_context_t context;
powerpc: Use 64k pages without needing cache-inhibited large pages Some POWER5+ machines can do 64k hardware pages for normal memory but not for cache-inhibited pages. This patch lets us use 64k hardware pages for most user processes on such machines (assuming the kernel has been configured with CONFIG_PPC_64K_PAGES=y). User processes start out using 64k pages and get switched to 4k pages if they use any non-cacheable mappings. With this, we use 64k pages for the vmalloc region and 4k pages for the imalloc region. If anything creates a non-cacheable mapping in the vmalloc region, the vmalloc region will get switched to 4k pages. I don't know of any driver other than the DRM that would do this, though, and these machines don't have AGP. When a region gets switched from 64k pages to 4k pages, we do not have to clear out all the 64k HPTEs from the hash table immediately. We use the _PAGE_COMBO bit in the Linux PTE to indicate whether the page was hashed in as a 64k page or a set of 4k pages. If hash_page is trying to insert a 4k page for a Linux PTE and it sees that it has already been inserted as a 64k page, it first invalidates the 64k HPTE before inserting the 4k HPTE. The hash invalidation routines also use the _PAGE_COMBO bit, to determine whether to look for a 64k HPTE or a set of 4k HPTEs to remove. With those two changes, we can tolerate a mix of 4k and 64k HPTEs in the hash table, and they will all get removed when the address space is torn down. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-14 20:45:18 -04:00
u16 vmalloc_sllp;
u16 slb_cache[SLB_CACHE_ENTRIES];
u16 slb_cache_ptr;
/*
* then miscellaneous read-write fields
*/
struct task_struct *__current; /* Pointer to current */
u64 kstack; /* Saved Kernel stack addr */
u64 stab_rr; /* stab/slb round-robin counter */
u64 saved_r1; /* r1 save for RTAS calls */
u64 saved_msr; /* MSR saved here by enter_rtas */
u8 proc_enabled; /* irq soft-enable flag */
u8 io_sync; /* writel() needs spin_unlock sync */
powerpc: Implement accurate task and CPU time accounting This implements accurate task and cpu time accounting for 64-bit powerpc kernels. Instead of accounting a whole jiffy of time to a task on a timer interrupt because that task happened to be running at the time, we now account time in units of timebase ticks according to the actual time spent by the task in user mode and kernel mode. We also count the time spent processing hardware and software interrupts accurately. This is conditional on CONFIG_VIRT_CPU_ACCOUNTING. If that is not set, we do tick-based approximate accounting as before. To get this accurate information, we read either the PURR (processor utilization of resources register) on POWER5 machines, or the timebase on other machines on * each entry to the kernel from usermode * each exit to usermode * transitions between process context, hard irq context and soft irq context in kernel mode * context switches. On POWER5 systems with shared-processor logical partitioning we also read both the PURR and the timebase at each timer interrupt and context switch in order to determine how much time has been taken by the hypervisor to run other partitions ("steal" time). Unfortunately, since we need values of the PURR on both threads at the same time to accurately calculate the steal time, and since we can only calculate steal time on a per-core basis, the apportioning of the steal time between idle time (time which we ceded to the hypervisor in the idle loop) and actual stolen time is somewhat approximate at the moment. This is all based quite heavily on what s390 does, and it uses the generic interfaces that were added by the s390 developers, i.e. account_system_time(), account_user_time(), etc. This patch doesn't add any new interfaces between the kernel and userspace, and doesn't change the units in which time is reported to userspace by things such as /proc/stat, /proc/<pid>/stat, getrusage(), times(), etc. Internally the various task and cpu times are stored in timebase units, but they are converted to USER_HZ units (1/100th of a second) when reported to userspace. Some precision is therefore lost but there should not be any accumulating error, since the internal accumulation is at full precision. Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-23 18:06:59 -05:00
/* Stuff for accurate time accounting */
u64 user_time; /* accumulated usermode TB ticks */
u64 system_time; /* accumulated system TB ticks */
u64 startpurr; /* PURR/TB value snapshot */
struct slb_shadow *slb_shadow_ptr;
};
extern struct paca_struct paca[];
void setup_boot_paca(void);
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PACA_H */