847 lines
28 KiB
Plaintext
847 lines
28 KiB
Plaintext
|
#
|
||
|
|
# Serial device configuration
|
||
|
|
#
|
||
|
|
# $Id: Kconfig,v 1.11 2004/03/11 18:08:04 lethal Exp $
|
||
|
|
#
|
||
|
|
|
||
|
|
menu "Serial drivers"
|
||
|
|
|
||
|
|
#
|
||
|
|
# The new 8250/16550 serial drivers
|
||
|
|
config SERIAL_8250
|
||
|
|
tristate "8250/16550 and compatible serial support"
|
||
|
|
depends on (BROKEN || !(SPARC64 || SPARC32))
|
||
|
|
select SERIAL_CORE
|
||
|
|
---help---
|
||
|
|
This selects whether you want to include the driver for the standard
|
||
|
|
serial ports. The standard answer is Y. People who might say N
|
||
|
|
here are those that are setting up dedicated Ethernet WWW/FTP
|
||
|
|
servers, or users that have one of the various bus mice instead of a
|
||
|
|
serial mouse and don't intend to use their machine's standard serial
|
||
|
|
port for anything. (Note that the Cyclades and Stallion multi
|
||
|
|
serial port drivers do not need this driver built in for them to
|
||
|
|
work.)
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called serial.
|
||
|
|
[WARNING: Do not compile this driver as a module if you are using
|
||
|
|
non-standard serial ports, since the configuration information will
|
||
|
|
be lost when the driver is unloaded. This limitation may be lifted
|
||
|
|
in the future.]
|
||
|
|
|
||
|
|
BTW1: If you have a mouseman serial mouse which is not recognized by
|
||
|
|
the X window system, try running gpm first.
|
||
|
|
|
||
|
|
BTW2: If you intend to use a software modem (also called Winmodem)
|
||
|
|
under Linux, forget it. These modems are crippled and require
|
||
|
|
proprietary drivers which are only available under Windows.
|
||
|
|
|
||
|
|
Most people will say Y or M here, so that they can use serial mice,
|
||
|
|
modems and similar devices connecting to the standard serial ports.
|
||
|
|
|
||
|
|
config SERIAL_8250_CONSOLE
|
||
|
|
bool "Console on 8250/16550 and compatible serial port"
|
||
|
|
depends on SERIAL_8250=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
---help---
|
||
|
|
If you say Y here, it will be possible to use a serial port as the
|
||
|
|
system console (the system console is the device which receives all
|
||
|
|
kernel messages and warnings and which allows logins in single user
|
||
|
|
mode). This could be useful if some terminal or printer is connected
|
||
|
|
to that serial port.
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible virtual console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttyS1". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader (grub or lilo or loadlin) about how to pass options
|
||
|
|
to the kernel at boot time.)
|
||
|
|
|
||
|
|
If you don't have a VGA card installed and you say Y here, the
|
||
|
|
kernel will automatically use the first serial line, /dev/ttyS0, as
|
||
|
|
system console.
|
||
|
|
|
||
|
|
If unsure, say N.
|
||
|
|
|
||
|
|
config SERIAL_8250_CS
|
||
|
|
tristate "8250/16550 PCMCIA device support"
|
||
|
|
depends on PCMCIA && SERIAL_8250
|
||
|
|
---help---
|
||
|
|
Say Y here to enable support for 16-bit PCMCIA serial devices,
|
||
|
|
including serial port cards, modems, and the modem functions of
|
||
|
|
multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are
|
||
|
|
credit-card size devices often used with laptops.)
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called serial_cs.
|
||
|
|
|
||
|
|
If unsure, say N.
|
||
|
|
|
||
|
|
config SERIAL_8250_ACPI
|
||
|
|
bool "8250/16550 device discovery via ACPI namespace"
|
||
|
|
default y if IA64
|
||
|
|
depends on ACPI_BUS && SERIAL_8250
|
||
|
|
---help---
|
||
|
|
If you wish to enable serial port discovery via the ACPI
|
||
|
|
namespace, say Y here. If unsure, say N.
|
||
|
|
|
||
|
|
config SERIAL_8250_NR_UARTS
|
||
|
|
int "Maximum number of non-legacy 8250/16550 serial ports"
|
||
|
|
depends on SERIAL_8250
|
||
|
|
default "4"
|
||
|
|
---help---
|
||
|
|
Set this to the number of non-legacy serial ports you want
|
||
|
|
the driver to support. This includes any ports discovered
|
||
|
|
via ACPI or PCI enumeration and any ports that may be added
|
||
|
|
at run-time via hot-plug.
|
||
|
|
|
||
|
|
config SERIAL_8250_EXTENDED
|
||
|
|
bool "Extended 8250/16550 serial driver options"
|
||
|
|
depends on SERIAL_8250
|
||
|
|
help
|
||
|
|
If you wish to use any non-standard features of the standard "dumb"
|
||
|
|
driver, say Y here. This includes HUB6 support, shared serial
|
||
|
|
interrupts, special multiport support, support for more than the
|
||
|
|
four COM 1/2/3/4 boards, etc.
|
||
|
|
|
||
|
|
Note that the answer to this question won't directly affect the
|
||
|
|
kernel: saying N will just cause the configurator to skip all
|
||
|
|
the questions about serial driver options. If unsure, say N.
|
||
|
|
|
||
|
|
config SERIAL_8250_MANY_PORTS
|
||
|
|
bool "Support more than 4 legacy serial ports"
|
||
|
|
depends on SERIAL_8250_EXTENDED && !IA64
|
||
|
|
help
|
||
|
|
Say Y here if you have dumb serial boards other than the four
|
||
|
|
standard COM 1/2/3/4 ports. This may happen if you have an AST
|
||
|
|
FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available
|
||
|
|
from <http://www.tldp.org/docs.html#howto>), or other custom
|
||
|
|
serial port hardware which acts similar to standard serial port
|
||
|
|
hardware. If you only use the standard COM 1/2/3/4 ports, you can
|
||
|
|
say N here to save some memory. You can also say Y if you have an
|
||
|
|
"intelligent" multiport card such as Cyclades, Digiboards, etc.
|
||
|
|
|
||
|
|
config SERIAL_8250_SHARE_IRQ
|
||
|
|
bool "Support for sharing serial interrupts"
|
||
|
|
depends on SERIAL_8250_EXTENDED
|
||
|
|
help
|
||
|
|
Some serial boards have hardware support which allows multiple dumb
|
||
|
|
serial ports on the same board to share a single IRQ. To enable
|
||
|
|
support for this in the serial driver, say Y here.
|
||
|
|
|
||
|
|
config SERIAL_8250_DETECT_IRQ
|
||
|
|
bool "Autodetect IRQ on standard ports (unsafe)"
|
||
|
|
depends on SERIAL_8250_EXTENDED
|
||
|
|
help
|
||
|
|
Say Y here if you want the kernel to try to guess which IRQ
|
||
|
|
to use for your serial port.
|
||
|
|
|
||
|
|
This is considered unsafe; it is far better to configure the IRQ in
|
||
|
|
a boot script using the setserial command.
|
||
|
|
|
||
|
|
If unsure, say N.
|
||
|
|
|
||
|
|
config SERIAL_8250_MULTIPORT
|
||
|
|
bool "Support special multiport boards"
|
||
|
|
depends on SERIAL_8250_EXTENDED
|
||
|
|
help
|
||
|
|
Some multiport serial ports have special ports which are used to
|
||
|
|
signal when there are any serial ports on the board which need
|
||
|
|
servicing. Say Y here to enable the serial driver to take advantage
|
||
|
|
of those special I/O ports.
|
||
|
|
|
||
|
|
config SERIAL_8250_RSA
|
||
|
|
bool "Support RSA serial ports"
|
||
|
|
depends on SERIAL_8250_EXTENDED
|
||
|
|
help
|
||
|
|
::: To be written :::
|
||
|
|
|
||
|
|
comment "Non-8250 serial port support"
|
||
|
|
|
||
|
|
config SERIAL_8250_ACORN
|
||
|
|
tristate "Acorn expansion card serial port support"
|
||
|
|
depends on ARM && ARCH_ACORN && SERIAL_8250
|
||
|
|
help
|
||
|
|
If you have an Atomwide Serial card or Serial Port card for an Acorn
|
||
|
|
system, say Y to this option. The driver can handle 1, 2, or 3 port
|
||
|
|
cards. If unsure, say N.
|
||
|
|
|
||
|
|
config SERIAL_AMBA_PL010
|
||
|
|
tristate "ARM AMBA PL010 serial port support"
|
||
|
|
depends on ARM_AMBA
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
This selects the ARM(R) AMBA(R) PrimeCell PL010 UART. If you have
|
||
|
|
an Integrator/AP or Integrator/PP2 platform, say Y or M here.
|
||
|
|
|
||
|
|
If unsure, say N.
|
||
|
|
|
||
|
|
config SERIAL_AMBA_PL010_CONSOLE
|
||
|
|
bool "Support for console on AMBA serial port"
|
||
|
|
depends on SERIAL_AMBA_PL010=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
---help---
|
||
|
|
Say Y here if you wish to use an AMBA PrimeCell UART as the system
|
||
|
|
console (the system console is the device which receives all kernel
|
||
|
|
messages and warnings and which allows logins in single user mode).
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible framebuffer console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttyAM0". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
||
|
|
kernel at boot time.)
|
||
|
|
|
||
|
|
config SERIAL_AMBA_PL011
|
||
|
|
tristate "ARM AMBA PL011 serial port support"
|
||
|
|
depends on ARM_AMBA
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
This selects the ARM(R) AMBA(R) PrimeCell PL011 UART. If you have
|
||
|
|
an Integrator/PP2, Integrator/CP or Versatile platform, say Y or M
|
||
|
|
here.
|
||
|
|
|
||
|
|
If unsure, say N.
|
||
|
|
|
||
|
|
config SERIAL_AMBA_PL011_CONSOLE
|
||
|
|
bool "Support for console on AMBA serial port"
|
||
|
|
depends on SERIAL_AMBA_PL011=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
---help---
|
||
|
|
Say Y here if you wish to use an AMBA PrimeCell UART as the system
|
||
|
|
console (the system console is the device which receives all kernel
|
||
|
|
messages and warnings and which allows logins in single user mode).
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible framebuffer console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttyAM0". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
||
|
|
kernel at boot time.)
|
||
|
|
|
||
|
|
config SERIAL_CLPS711X
|
||
|
|
tristate "CLPS711X serial port support"
|
||
|
|
depends on ARM && ARCH_CLPS711X
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
::: To be written :::
|
||
|
|
|
||
|
|
config SERIAL_CLPS711X_CONSOLE
|
||
|
|
bool "Support for console on CLPS711X serial port"
|
||
|
|
depends on SERIAL_CLPS711X=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
Even if you say Y here, the currently visible virtual console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttyCL1". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
||
|
|
kernel at boot time.)
|
||
|
|
|
||
|
|
config SERIAL_S3C2410
|
||
|
|
tristate "Samsung S3C2410 Serial port support"
|
||
|
|
depends on ARM && ARCH_S3C2410
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
Support for the on-chip UARTs on the Samsung S3C2410X CPU,
|
||
|
|
providing /dev/ttySAC0, 1 and 2 (note, some machines may not
|
||
|
|
provide all of these ports, depending on how the serial port
|
||
|
|
pins are configured.
|
||
|
|
|
||
|
|
config SERIAL_S3C2410_CONSOLE
|
||
|
|
bool "Support for console on S3C2410 serial port"
|
||
|
|
depends on SERIAL_S3C2410=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
Allow selection of the S3C2410 on-board serial ports for use as
|
||
|
|
an virtual console.
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible virtual console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttySACx". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader about how to pass options to the kernel at
|
||
|
|
boot time.)
|
||
|
|
|
||
|
|
config SERIAL_BAST_SIO
|
||
|
|
bool "Support for BAST SuperIO serial ports"
|
||
|
|
depends on ARCH_BAST && SERIAL_8250=y
|
||
|
|
help
|
||
|
|
Support for registerin the SuperIO chip on BAST board with
|
||
|
|
the 8250/16550 uart code.
|
||
|
|
|
||
|
|
config SERIAL_DZ
|
||
|
|
bool "DECstation DZ serial driver"
|
||
|
|
depends on MACH_DECSTATION && MIPS32
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
DZ11-family serial controllers for VAXstations, including the
|
||
|
|
DC7085, M7814, and M7819.
|
||
|
|
|
||
|
|
config SERIAL_DZ_CONSOLE
|
||
|
|
bool "Support console on DECstation DZ serial driver"
|
||
|
|
depends on SERIAL_DZ=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
If you say Y here, it will be possible to use a serial port as the
|
||
|
|
system console (the system console is the device which receives all
|
||
|
|
kernel messages and warnings and which allows logins in single user
|
||
|
|
mode). Note that the firmware uses ttyS0 as the serial console on
|
||
|
|
the Maxine and ttyS2 on the others.
|
||
|
|
|
||
|
|
If unsure, say Y.
|
||
|
|
|
||
|
|
config SERIAL_21285
|
||
|
|
tristate "DC21285 serial port support"
|
||
|
|
depends on ARM && FOOTBRIDGE
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
If you have a machine based on a 21285 (Footbridge) StrongARM(R)/
|
||
|
|
PCI bridge you can enable its onboard serial port by enabling this
|
||
|
|
option.
|
||
|
|
|
||
|
|
config SERIAL_21285_CONSOLE
|
||
|
|
bool "Console on DC21285 serial port"
|
||
|
|
depends on SERIAL_21285=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
If you have enabled the serial port on the 21285 footbridge you can
|
||
|
|
make it the console by answering Y to this option.
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible virtual console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttyFB". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
||
|
|
kernel at boot time.)
|
||
|
|
|
||
|
|
config SERIAL_UART00
|
||
|
|
bool "Excalibur serial port (uart00) support"
|
||
|
|
depends on ARM && ARCH_CAMELOT
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
Say Y here if you want to use the hard logic uart on Excalibur. This
|
||
|
|
driver also supports soft logic implementations of this uart core.
|
||
|
|
|
||
|
|
config SERIAL_UART00_CONSOLE
|
||
|
|
bool "Support for console on Excalibur serial port"
|
||
|
|
depends on SERIAL_UART00
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
Say Y here if you want to support a serial console on an Excalibur
|
||
|
|
hard logic uart or uart00 IP core.
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible virtual console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttyS1". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
||
|
|
kernel at boot time.)
|
||
|
|
|
||
|
|
config SERIAL_MPSC
|
||
|
|
bool "Marvell MPSC serial port support"
|
||
|
|
depends on PPC32 && MV64X60
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
Say Y here if you want to use the Marvell MPSC serial controller.
|
||
|
|
|
||
|
|
config SERIAL_MPSC_CONSOLE
|
||
|
|
bool "Support for console on Marvell MPSC serial port"
|
||
|
|
depends on SERIAL_MPSC
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
Say Y here if you want to support a serial console on a Marvell MPSC.
|
||
|
|
|
||
|
|
config SERIAL_PXA
|
||
|
|
bool "PXA serial port support"
|
||
|
|
depends on ARM && ARCH_PXA
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
If you have a machine based on an Intel XScale PXA2xx CPU you
|
||
|
|
can enable its onboard serial ports by enabling this option.
|
||
|
|
|
||
|
|
config SERIAL_PXA_CONSOLE
|
||
|
|
bool "Console on PXA serial port"
|
||
|
|
depends on SERIAL_PXA
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
If you have enabled the serial port on the Intel XScale PXA
|
||
|
|
CPU you can make it the console by answering Y to this option.
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible virtual console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttySA0". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
||
|
|
kernel at boot time.)
|
||
|
|
|
||
|
|
config SERIAL_SA1100
|
||
|
|
bool "SA1100 serial port support"
|
||
|
|
depends on ARM && ARCH_SA1100
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
If you have a machine based on a SA1100/SA1110 StrongARM(R) CPU you
|
||
|
|
can enable its onboard serial port by enabling this option.
|
||
|
|
Please read <file:Documentation/arm/SA1100/serial_UART> for further
|
||
|
|
info.
|
||
|
|
|
||
|
|
config SERIAL_SA1100_CONSOLE
|
||
|
|
bool "Console on SA1100 serial port"
|
||
|
|
depends on SERIAL_SA1100
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
If you have enabled the serial port on the SA1100/SA1110 StrongARM
|
||
|
|
CPU you can make it the console by answering Y to this option.
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible virtual console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttySA0". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
||
|
|
kernel at boot time.)
|
||
|
|
|
||
|
|
config SERIAL_IMX
|
||
|
|
bool "IMX serial port support"
|
||
|
|
depends on ARM && ARCH_IMX
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
If you have a machine based on a Motorola IMX CPU you
|
||
|
|
can enable its onboard serial port by enabling this option.
|
||
|
|
|
||
|
|
config SERIAL_IMX_CONSOLE
|
||
|
|
bool "Console on IMX serial port"
|
||
|
|
depends on SERIAL_IMX
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
If you have enabled the serial port on the Motorola IMX
|
||
|
|
CPU you can make it the console by answering Y to this option.
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible virtual console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttySA0". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
||
|
|
kernel at boot time.)
|
||
|
|
|
||
|
|
config SERIAL_SUNCORE
|
||
|
|
bool
|
||
|
|
depends on SPARC32 || SPARC64
|
||
|
|
select SERIAL_CORE
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
default y
|
||
|
|
|
||
|
|
config SERIAL_SUNZILOG
|
||
|
|
tristate "Sun Zilog8530 serial support"
|
||
|
|
depends on SPARC32 || SPARC64
|
||
|
|
help
|
||
|
|
This driver supports the Zilog8530 serial ports found on many Sparc
|
||
|
|
systems. Say Y or M if you want to be able to these serial ports.
|
||
|
|
|
||
|
|
config SERIAL_SUNZILOG_CONSOLE
|
||
|
|
bool "Console on Sun Zilog8530 serial port"
|
||
|
|
depends on SERIAL_SUNZILOG=y
|
||
|
|
help
|
||
|
|
If you would like to be able to use the Zilog8530 serial port
|
||
|
|
on your Sparc system as the console, you can do so by answering
|
||
|
|
Y to this option.
|
||
|
|
|
||
|
|
config SERIAL_SUNSU
|
||
|
|
tristate "Sun SU serial support"
|
||
|
|
depends on (SPARC32 || SPARC64) && PCI
|
||
|
|
help
|
||
|
|
This driver supports the 8250 serial ports that run the keyboard and
|
||
|
|
mouse on (PCI) UltraSPARC systems. Say Y or M if you want to be able
|
||
|
|
to these serial ports.
|
||
|
|
|
||
|
|
config SERIAL_SUNSU_CONSOLE
|
||
|
|
bool "Console on Sun SU serial port"
|
||
|
|
depends on SERIAL_SUNSU=y
|
||
|
|
help
|
||
|
|
If you would like to be able to use the SU serial port
|
||
|
|
on your Sparc system as the console, you can do so by answering
|
||
|
|
Y to this option.
|
||
|
|
|
||
|
|
config SERIAL_MUX
|
||
|
|
tristate "Serial MUX support"
|
||
|
|
depends on PARISC
|
||
|
|
select SERIAL_CORE
|
||
|
|
default y
|
||
|
|
---help---
|
||
|
|
Saying Y here will enable the hardware MUX serial driver for
|
||
|
|
the Nova and K class systems. The hardware MUX is not 8250/16550
|
||
|
|
compatible therefore the /dev/ttyB0 device is shared between the
|
||
|
|
Serial MUX and the PDC software console. The following steps
|
||
|
|
need to be completed to use the Serial MUX:
|
||
|
|
|
||
|
|
1. create the device entry (mknod /dev/ttyB0 c 11 0)
|
||
|
|
2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
|
||
|
|
3. Add device ttyB0 to /etc/securetty (if you want to log on as
|
||
|
|
root on this console.)
|
||
|
|
4. Change the kernel command console parameter to: console=ttyB0
|
||
|
|
|
||
|
|
config SERIAL_MUX_CONSOLE
|
||
|
|
bool "Support for console on serial MUX"
|
||
|
|
depends on SERIAL_MUX
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
default y
|
||
|
|
|
||
|
|
config PDC_CONSOLE
|
||
|
|
bool "PDC software console support"
|
||
|
|
depends on PARISC && !SERIAL_MUX && VT
|
||
|
|
default n
|
||
|
|
help
|
||
|
|
Saying Y here will enable the software based PDC console to be
|
||
|
|
used as the system console. This is useful for machines in
|
||
|
|
which the hardware based console has not been written yet. The
|
||
|
|
following steps must be competed to use the PDC console:
|
||
|
|
|
||
|
|
1. create the device entry (mknod /dev/ttyB0 c 11 0)
|
||
|
|
2. Edit the /etc/inittab to start a getty listening on /dev/ttyB0
|
||
|
|
3. Add device ttyB0 to /etc/securetty (if you want to log on as
|
||
|
|
root on this console.)
|
||
|
|
4. Change the kernel command console parameter to: console=ttyB0
|
||
|
|
|
||
|
|
config SERIAL_SUNSAB
|
||
|
|
tristate "Sun Siemens SAB82532 serial support"
|
||
|
|
depends on (SPARC32 || SPARC64) && PCI
|
||
|
|
help
|
||
|
|
This driver supports the Siemens SAB82532 DUSCC serial ports on newer
|
||
|
|
(PCI) UltraSPARC systems. Say Y or M if you want to be able to these
|
||
|
|
serial ports.
|
||
|
|
|
||
|
|
config SERIAL_SUNSAB_CONSOLE
|
||
|
|
bool "Console on Sun Siemens SAB82532 serial port"
|
||
|
|
depends on SERIAL_SUNSAB=y
|
||
|
|
help
|
||
|
|
If you would like to be able to use the SAB82532 serial port
|
||
|
|
on your Sparc system as the console, you can do so by answering
|
||
|
|
Y to this option.
|
||
|
|
|
||
|
|
config SERIAL_IP22_ZILOG
|
||
|
|
tristate "IP22 Zilog8530 serial support"
|
||
|
|
depends on SGI_IP22
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
This driver supports the Zilog8530 serial ports found on SGI IP22
|
||
|
|
systems. Say Y or M if you want to be able to these serial ports.
|
||
|
|
|
||
|
|
config SERIAL_IP22_ZILOG_CONSOLE
|
||
|
|
bool "Console on IP22 Zilog8530 serial port"
|
||
|
|
depends on SERIAL_IP22_ZILOG=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
|
||
|
|
config V850E_UART
|
||
|
|
bool "NEC V850E on-chip UART support"
|
||
|
|
depends on V850E_MA1 || V850E_ME2 || V850E_TEG || V850E2_ANNA || V850E_AS85EP1
|
||
|
|
select SERIAL_CORE
|
||
|
|
default y
|
||
|
|
|
||
|
|
config V850E_UARTB
|
||
|
|
bool
|
||
|
|
depends V850E_UART && V850E_ME2
|
||
|
|
default y
|
||
|
|
|
||
|
|
config V850E_UART_CONSOLE
|
||
|
|
bool "Use NEC V850E on-chip UART for console"
|
||
|
|
depends on V850E_UART
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
|
||
|
|
config SERIAL_SH_SCI
|
||
|
|
tristate "SH SCI(F) serial port support"
|
||
|
|
depends on SUPERH || H8300
|
||
|
|
select SERIAL_CORE
|
||
|
|
|
||
|
|
config SERIAL_SH_SCI_CONSOLE
|
||
|
|
bool "Support for console on SH SCI(F)"
|
||
|
|
depends on SERIAL_SH_SCI=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
|
||
|
|
config SERIAL_AU1X00
|
||
|
|
bool "Enable Au1x00 UART Support"
|
||
|
|
depends on MIPS && SOC_AU1X00
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
If you have an Alchemy AU1X00 processor (MIPS based) and you want
|
||
|
|
to use serial ports, say Y. Otherwise, say N.
|
||
|
|
|
||
|
|
config SERIAL_AU1X00_CONSOLE
|
||
|
|
bool "Enable Au1x00 serial console"
|
||
|
|
depends on SERIAL_AU1X00
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
If you have an Alchemy AU1X00 processor (MIPS based) and you want
|
||
|
|
to use a console on a serial port, say Y. Otherwise, say N.
|
||
|
|
|
||
|
|
config SERIAL_CORE
|
||
|
|
tristate
|
||
|
|
|
||
|
|
config SERIAL_CORE_CONSOLE
|
||
|
|
bool
|
||
|
|
|
||
|
|
config SERIAL_68328
|
||
|
|
bool "68328 serial support"
|
||
|
|
depends on M68328 || M68EZ328 || M68VZ328
|
||
|
|
help
|
||
|
|
This driver supports the built-in serial port of the Motorola 68328
|
||
|
|
(standard, EZ and VZ varities).
|
||
|
|
|
||
|
|
config SERIAL_68328_RTS_CTS
|
||
|
|
bool "Support RTS/CTS on 68328 serial port"
|
||
|
|
depends on SERIAL_68328
|
||
|
|
|
||
|
|
config SERIAL_COLDFIRE
|
||
|
|
bool "ColdFire serial support"
|
||
|
|
depends on COLDFIRE
|
||
|
|
help
|
||
|
|
This driver supports the built-in serial ports of the Motorola ColdFire
|
||
|
|
family of CPUs.
|
||
|
|
|
||
|
|
config SERIAL_68360_SMC
|
||
|
|
bool "68360 SMC uart support"
|
||
|
|
depends on M68360
|
||
|
|
help
|
||
|
|
This driver supports the SMC serial ports of the Motorola 68360 CPU.
|
||
|
|
|
||
|
|
config SERIAL_68360_SCC
|
||
|
|
bool "68360 SCC uart support"
|
||
|
|
depends on M68360
|
||
|
|
help
|
||
|
|
This driver supports the SCC serial ports of the Motorola 68360 CPU.
|
||
|
|
|
||
|
|
config SERIAL_68360
|
||
|
|
bool
|
||
|
|
depends on SERIAL_68360_SMC || SERIAL_68360_SCC
|
||
|
|
default y
|
||
|
|
|
||
|
|
config SERIAL_PMACZILOG
|
||
|
|
tristate "PowerMac z85c30 ESCC support"
|
||
|
|
depends on PPC_OF && PPC_PMAC
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
This driver supports the Zilog z85C30 serial ports found on
|
||
|
|
PowerMac machines.
|
||
|
|
Say Y or M if you want to be able to these serial ports.
|
||
|
|
|
||
|
|
config SERIAL_PMACZILOG_CONSOLE
|
||
|
|
bool "Console on PowerMac z85c30 serial port"
|
||
|
|
depends on SERIAL_PMACZILOG=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
If you would like to be able to use the z85c30 serial port
|
||
|
|
on your PowerMac as the console, you can do so by answering
|
||
|
|
Y to this option.
|
||
|
|
|
||
|
|
config SERIAL_LH7A40X
|
||
|
|
tristate "Sharp LH7A40X embedded UART support"
|
||
|
|
depends on ARM && ARCH_LH7A40X
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
This enables support for the three on-board UARTs of the
|
||
|
|
Sharp LH7A40X series CPUs. Choose Y or M.
|
||
|
|
|
||
|
|
config SERIAL_LH7A40X_CONSOLE
|
||
|
|
bool "Support for console on Sharp LH7A40X serial port"
|
||
|
|
depends on SERIAL_LH7A40X=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
Say Y here if you wish to use one of the serial ports as the
|
||
|
|
system console--the system console is the device which
|
||
|
|
receives all kernel messages and warnings and which allows
|
||
|
|
logins in single user mode.
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible framebuffer console
|
||
|
|
(/dev/tty0) will still be used as the default system console, but
|
||
|
|
you can alter that using a kernel command line, for example
|
||
|
|
"console=ttyAM1".
|
||
|
|
|
||
|
|
config SERIAL_CPM
|
||
|
|
tristate "CPM SCC/SMC serial port support"
|
||
|
|
depends on CPM2 || 8xx
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
This driver supports the SCC and SMC serial ports on Motorola
|
||
|
|
embedded PowerPC that contain a CPM1 (8xx) or CPM2 (8xxx)
|
||
|
|
|
||
|
|
config SERIAL_CPM_CONSOLE
|
||
|
|
bool "Support for console on CPM SCC/SMC serial port"
|
||
|
|
depends on SERIAL_CPM=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
Say Y here if you wish to use a SCC or SMC CPM UART as the system
|
||
|
|
console (the system console is the device which receives all kernel
|
||
|
|
messages and warnings and which allows logins in single user mode).
|
||
|
|
|
||
|
|
Even if you say Y here, the currently visible framebuffer console
|
||
|
|
(/dev/tty0) will still be used as the system console by default, but
|
||
|
|
you can alter that using a kernel command line option such as
|
||
|
|
"console=ttyCPM0". (Try "man bootparam" or see the documentation of
|
||
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
||
|
|
kernel at boot time.)
|
||
|
|
|
||
|
|
config SERIAL_CPM_SCC1
|
||
|
|
bool "Support for SCC1 serial port"
|
||
|
|
depends on SERIAL_CPM=y
|
||
|
|
help
|
||
|
|
Select the is option to use SCC1 as a serial port
|
||
|
|
|
||
|
|
config SERIAL_CPM_SCC2
|
||
|
|
bool "Support for SCC2 serial port"
|
||
|
|
depends on SERIAL_CPM=y
|
||
|
|
help
|
||
|
|
Select the is option to use SCC2 as a serial port
|
||
|
|
|
||
|
|
config SERIAL_CPM_SCC3
|
||
|
|
bool "Support for SCC3 serial port"
|
||
|
|
depends on SERIAL_CPM=y
|
||
|
|
help
|
||
|
|
Select the is option to use SCC3 as a serial port
|
||
|
|
|
||
|
|
config SERIAL_CPM_SCC4
|
||
|
|
bool "Support for SCC4 serial port"
|
||
|
|
depends on SERIAL_CPM=y
|
||
|
|
help
|
||
|
|
Select the is option to use SCC4 as a serial port
|
||
|
|
|
||
|
|
config SERIAL_CPM_SMC1
|
||
|
|
bool "Support for SMC1 serial port"
|
||
|
|
depends on SERIAL_CPM=y
|
||
|
|
help
|
||
|
|
Select the is option to use SMC1 as a serial port
|
||
|
|
|
||
|
|
config SERIAL_CPM_SMC2
|
||
|
|
bool "Support for SMC2 serial port"
|
||
|
|
depends on SERIAL_CPM=y
|
||
|
|
help
|
||
|
|
Select the is option to use SMC2 as a serial port
|
||
|
|
|
||
|
|
config SERIAL_SGI_L1_CONSOLE
|
||
|
|
bool "SGI Altix L1 serial console support"
|
||
|
|
depends on IA64_GENERIC || IA64_SGI_SN2
|
||
|
|
select SERIAL_CORE
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
If you have an SGI Altix and you would like to use the system
|
||
|
|
controller serial port as your console (you want this!),
|
||
|
|
say Y. Otherwise, say N.
|
||
|
|
|
||
|
|
config SERIAL_MPC52xx
|
||
|
|
tristate "Freescale MPC52xx family PSC serial support"
|
||
|
|
depends on PPC_MPC52xx
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
This drivers support the MPC52xx PSC serial ports. If you would
|
||
|
|
like to use them, you must answer Y or M to this option. Not that
|
||
|
|
for use as console, it must be included in kernel and not as a
|
||
|
|
module.
|
||
|
|
|
||
|
|
config SERIAL_MPC52xx_CONSOLE
|
||
|
|
bool "Console on a Freescale MPC52xx family PSC serial port"
|
||
|
|
depends on SERIAL_MPC52xx=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
Select this options if you'd like to use one of the PSC serial port
|
||
|
|
of the Freescale MPC52xx family as a console.
|
||
|
|
|
||
|
|
config SERIAL_MPC52xx_CONSOLE_BAUD
|
||
|
|
int "Freescale MPC52xx family PSC serial port baud"
|
||
|
|
depends on SERIAL_MPC52xx_CONSOLE=y
|
||
|
|
default "9600"
|
||
|
|
help
|
||
|
|
Select the MPC52xx console baud rate.
|
||
|
|
This value is only used if the bootloader doesn't pass in the
|
||
|
|
console baudrate
|
||
|
|
|
||
|
|
config SERIAL_ICOM
|
||
|
|
tristate "IBM Multiport Serial Adapter"
|
||
|
|
depends on PPC_ISERIES || PPC_PSERIES
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
This driver is for a family of multiport serial adapters
|
||
|
|
including 2 port RVX, 2 port internal modem, 4 port internal
|
||
|
|
modem and a split 1 port RVX and 1 port internal modem.
|
||
|
|
|
||
|
|
This driver can also be built as a module. If so, the module
|
||
|
|
will be called icom.
|
||
|
|
|
||
|
|
config SERIAL_M32R_SIO
|
||
|
|
bool "M32R SIO I/F"
|
||
|
|
depends on M32R
|
||
|
|
default y
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
Say Y here if you want to use the M32R serial controller.
|
||
|
|
|
||
|
|
config SERIAL_M32R_SIO_CONSOLE
|
||
|
|
bool "use SIO console"
|
||
|
|
depends on SERIAL_M32R_SIO=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
Say Y here if you want to support a serial console.
|
||
|
|
|
||
|
|
If you use an M3T-M32700UT or an OPSPUT platform,
|
||
|
|
please say also y for SERIAL_M32R_PLDSIO.
|
||
|
|
|
||
|
|
config SERIAL_M32R_PLDSIO
|
||
|
|
bool "M32R SIO I/F on a PLD"
|
||
|
|
depends on SERIAL_M32R_SIO=y
|
||
|
|
default n
|
||
|
|
help
|
||
|
|
Say Y here if you want to use the M32R serial controller
|
||
|
|
on a PLD (Programmable Logic Device).
|
||
|
|
|
||
|
|
If you use an M3T-M32700UT or an OPSPUT platform,
|
||
|
|
please say Y.
|
||
|
|
|
||
|
|
config SERIAL_TXX9
|
||
|
|
bool "TMPTX39XX/49XX SIO support"
|
||
|
|
depends HAS_TXX9_SERIAL
|
||
|
|
select SERIAL_CORE
|
||
|
|
default y
|
||
|
|
|
||
|
|
config HAS_TXX9_SERIAL
|
||
|
|
bool
|
||
|
|
|
||
|
|
config SERIAL_TXX9_CONSOLE
|
||
|
|
bool "TMPTX39XX/49XX SIO Console support"
|
||
|
|
depends on SERIAL_TXX9=y
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
|
||
|
|
config SERIAL_TXX9_STDSERIAL
|
||
|
|
bool "TX39XX/49XX SIO act as standard serial"
|
||
|
|
depends on !SERIAL_8250 && SERIAL_TXX9
|
||
|
|
|
||
|
|
config SERIAL_VR41XX
|
||
|
|
tristate "NEC VR4100 series Serial Interface Unit support"
|
||
|
|
depends on CPU_VR41XX
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
If you have a NEC VR4100 series processor and you want to use
|
||
|
|
Serial Interface Unit(SIU) or Debug Serial Interface Unit(DSIU)
|
||
|
|
(not include VR4111/VR4121 DSIU), say Y. Otherwise, say N.
|
||
|
|
|
||
|
|
config SERIAL_VR41XX_CONSOLE
|
||
|
|
bool "Enable NEC VR4100 series Serial Interface Unit console"
|
||
|
|
depends on SERIAL_VR41XX
|
||
|
|
select SERIAL_CORE_CONSOLE
|
||
|
|
help
|
||
|
|
If you have a NEC VR4100 series processor and you want to use
|
||
|
|
a console on a serial port, say Y. Otherwise, say N.
|
||
|
|
|
||
|
|
config SERIAL_JSM
|
||
|
|
tristate "Digi International NEO PCI Support"
|
||
|
|
depends on PCI
|
||
|
|
select SERIAL_CORE
|
||
|
|
help
|
||
|
|
This is a driver for Digi International's Neo series
|
||
|
|
of cards which provide multiple serial ports. You would need
|
||
|
|
something like this to connect more than two modems to your Linux
|
||
|
|
box, for instance in order to become a dial-in server. This driver
|
||
|
|
supports PCI boards only.
|
||
|
|
If you have a card like this, say Y here and read the file
|
||
|
|
<file:Documentation/jsm.txt>.
|
||
|
|
|
||
|
|
To compile this driver as a module, choose M here: the
|
||
|
|
module will be called jsm.
|
||
|
|
|
||
|
|
endmenu
|