android_kernel_xiaomi_sm8350/arch/powerpc/kernel/pci_64.c

662 lines
17 KiB
C
Raw Normal View History

/*
* Port for PPC64 David Engebretsen, IBM Corp.
* Contains common pci routines for ppc64 platform, pSeries and iSeries brands.
*
* Copyright (C) 2003 Anton Blanchard <anton@au.ibm.com>, IBM
* Rework, based on alpha PCI code.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#undef DEBUG
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/mm.h>
#include <linux/list.h>
#include <linux/syscalls.h>
[PATCH] powerpc: fix trigger handling in the new irq code This patch slightly reworks the new irq code to fix a small design error. I removed the passing of the trigger to the map() calls entirely, it was not a good idea to have one call do two different things. It also fixes a couple of corner cases. Mapping a linux virtual irq to a physical irq now does only that. Setting the trigger is a different action which has a different call. The main changes are: - I no longer call host->ops->map() for an already mapped irq, I just return the virtual number that was already mapped. It was called before to give an opportunity to change the trigger, but that was causing issues as that could happen while the interrupt was in use by a device, and because of the trigger change, map would potentially muck around with things in a racy way. That was causing much burden on a given's controller implementation of map() to get it right. This is much simpler now. map() is only called on the initial mapping of an irq, meaning that you know that this irq is _not_ being used. You can initialize the hardware if you want (though you don't have to). - Controllers that can handle different type of triggers (level/edge/etc...) now implement the standard irq_chip->set_type() call as defined by the generic code. That means that you can use the standard set_irq_type() to configure an irq line manually if you wish or (though I don't like that interface), pass explicit trigger flags to request_irq() as defined by the generic kernel interfaces. Also, using those interfaces guarantees that your controller set_type callback is called with the descriptor lock held, thus providing locking against activity on the same interrupt (including mask/unmask/etc...) automatically. A result is that, for example, MPIC's own map() implementation calls irq_set_type(NONE) to configure the hardware to the default triggers. - To allow the above, the irq_map array entry for the new mapped interrupt is now set before map() callback is called for the controller. - The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function for mapping interrupts from the device-tree now also call the separate set_irq_type(), and only does so if there is a change in the trigger type. - While I was at it, I changed pci_read_irq_line() (which is the helper I would expect most archs to use in their pcibios_fixup() to get the PCI interrupt routing from the device tree) to also handle a fallback when the DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an interrupt number from the device. That number is then mapped using the default controller, and the trigger is set to level low. That default behaviour works for several platforms that don't have a proper interrupt tree like Pegasos. If it doesn't work for your platform, then either provide a proper interrupt tree from the firmware so that fallback isn't needed, or don't call pci_read_irq_line() - Add back a bit that got dropped by my main rework patch for properly clearing pending IPIs on pSeries when using a kexec Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 07:44:42 -04:00
#include <linux/irq.h>
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
#include <linux/vmalloc.h>
#include <asm/processor.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/byteorder.h>
#include <asm/machdep.h>
#include <asm/ppc-pci.h>
#ifdef DEBUG
#include <asm/udbg.h>
#define DBG(fmt...) printk(fmt)
#else
#define DBG(fmt...)
#endif
unsigned long pci_probe_only = 1;
/* pci_io_base -- the base address from which io bars are offsets.
* This is the lowest I/O base address (so bar values are always positive),
* and it *must* be the start of ISA space if an ISA bus exists because
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
* ISA drivers use hard coded offsets. If no ISA bus exists nothing
* is mapped on the first 64K of IO space
*/
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
unsigned long pci_io_base = ISA_IO_BASE;
EXPORT_SYMBOL(pci_io_base);
LIST_HEAD(hose_list);
static struct dma_mapping_ops *pci_dma_ops;
void set_pci_dma_ops(struct dma_mapping_ops *dma_ops)
{
pci_dma_ops = dma_ops;
}
struct dma_mapping_ops *get_pci_dma_ops(void)
{
return pci_dma_ops;
}
EXPORT_SYMBOL(get_pci_dma_ops);
int pci_set_dma_mask(struct pci_dev *dev, u64 mask)
{
return dma_set_mask(&dev->dev, mask);
}
int pci_set_consistent_dma_mask(struct pci_dev *dev, u64 mask)
{
int rc;
rc = dma_set_mask(&dev->dev, mask);
dev->dev.coherent_dma_mask = dev->dma_mask;
return rc;
}
static void fixup_broken_pcnet32(struct pci_dev* dev)
{
if ((dev->class>>8 == PCI_CLASS_NETWORK_ETHERNET)) {
dev->vendor = PCI_VENDOR_ID_AMD;
pci_write_config_word(dev, PCI_VENDOR_ID, PCI_VENDOR_ID_AMD);
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TRIDENT, PCI_ANY_ID, fixup_broken_pcnet32);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
{
const u32 *prop;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
int len;
prop = of_get_property(np, name, &len);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (prop && len >= 4)
return *prop;
return def;
}
static unsigned int pci_parse_of_flags(u32 addr0)
{
unsigned int flags = 0;
if (addr0 & 0x02000000) {
flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
flags |= (addr0 >> 22) & PCI_BASE_ADDRESS_MEM_TYPE_64;
flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (addr0 & 0x40000000)
flags |= IORESOURCE_PREFETCH
| PCI_BASE_ADDRESS_MEM_PREFETCH;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
} else if (addr0 & 0x01000000)
flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
return flags;
}
static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
{
u64 base, size;
unsigned int flags;
struct resource *res;
const u32 *addrs;
u32 i;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
int proplen;
addrs = of_get_property(node, "assigned-addresses", &proplen);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (!addrs)
return;
DBG(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
for (; proplen >= 20; proplen -= 20, addrs += 5) {
flags = pci_parse_of_flags(addrs[0]);
if (!flags)
continue;
base = of_read_number(&addrs[1], 2);
size = of_read_number(&addrs[3], 2);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (!size)
continue;
i = addrs[0] & 0xff;
DBG(" base: %llx, size: %llx, i: %x\n",
(unsigned long long)base, (unsigned long long)size, i);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
} else if (i == dev->rom_base_reg) {
res = &dev->resource[PCI_ROM_RESOURCE];
flags |= IORESOURCE_READONLY | IORESOURCE_CACHEABLE;
} else {
printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
continue;
}
res->start = base;
res->end = base + size - 1;
res->flags = flags;
res->name = pci_name(dev);
}
}
struct pci_dev *of_create_pci_dev(struct device_node *node,
struct pci_bus *bus, int devfn)
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
{
struct pci_dev *dev;
const char *type;
dev = alloc_pci_dev();
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (!dev)
return NULL;
type = of_get_property(node, "device_type", NULL);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (type == NULL)
type = "";
DBG(" create device, devfn: %x, type: %s\n", devfn, type);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
dev->bus = bus;
dev->sysdata = node;
dev->dev.parent = bus->bridge;
dev->dev.bus = &pci_bus_type;
dev->devfn = devfn;
dev->multifunction = 0; /* maybe a lie? */
dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
dev->device = get_int_prop(node, "device-id", 0xffff);
dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
dev->subsystem_device = get_int_prop(node, "subsystem-id", 0);
dev->cfg_size = pci_cfg_space_size(dev);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
dev->class = get_int_prop(node, "class-code", 0);
dev->revision = get_int_prop(node, "revision-id", 0);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
DBG(" class: 0x%x\n", dev->class);
DBG(" revision: 0x%x\n", dev->revision);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
dev->dma_mask = 0xffffffff;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (!strcmp(type, "pci") || !strcmp(type, "pciex")) {
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
} else if (!strcmp(type, "cardbus")) {
dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
} else {
dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
dev->rom_base_reg = PCI_ROM_ADDRESS;
2006-07-03 07:36:01 -04:00
/* Maybe do a default OF mapping here */
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
dev->irq = NO_IRQ;
}
pci_parse_of_addrs(node, dev);
DBG(" adding to system ...\n");
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
pci_device_add(dev, bus);
return dev;
}
EXPORT_SYMBOL(of_create_pci_dev);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
void __devinit of_scan_bus(struct device_node *node,
struct pci_bus *bus)
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
{
struct device_node *child;
const u32 *reg;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
int reglen, devfn;
struct pci_dev *dev;
DBG("of_scan_bus(%s) bus no %d... \n", node->full_name, bus->number);
/* Scan direct children */
for_each_child_of_node(node, child) {
DBG(" * %s\n", child->full_name);
reg = of_get_property(child, "reg", &reglen);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (reg == NULL || reglen < 20)
continue;
devfn = (reg[0] >> 8) & 0xff;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
/* create a new pci_dev for this device */
dev = of_create_pci_dev(child, bus, devfn);
if (!dev)
continue;
DBG(" dev header type: %x\n", dev->hdr_type);
}
/* Ally all fixups */
pcibios_fixup_of_probed_bus(bus);
/* Now scan child busses */
list_for_each_entry(dev, &bus->devices, bus_list) {
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE ||
dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) {
struct device_node *child = pci_device_to_OF_node(dev);
if (dev)
of_scan_pci_bridge(child, dev);
}
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
}
}
EXPORT_SYMBOL(of_scan_bus);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
void __devinit of_scan_pci_bridge(struct device_node *node,
struct pci_dev *dev)
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
{
struct pci_bus *bus;
const u32 *busrange, *ranges;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
int len, i, mode;
struct resource *res;
unsigned int flags;
u64 size;
DBG("of_scan_pci_bridge(%s)\n", node->full_name);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
/* parse bus-range property */
busrange = of_get_property(node, "bus-range", &len);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (busrange == NULL || len != 8) {
printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
node->full_name);
return;
}
ranges = of_get_property(node, "ranges", &len);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (ranges == NULL) {
printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %s\n",
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
node->full_name);
return;
}
bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
if (!bus) {
printk(KERN_ERR "Failed to create pci bus for %s\n",
node->full_name);
return;
}
bus->primary = dev->bus->number;
bus->subordinate = busrange[1];
bus->bridge_ctl = 0;
bus->sysdata = node;
/* parse ranges property */
/* PCI #address-cells == 3 and #size-cells == 2 always */
res = &dev->resource[PCI_BRIDGE_RESOURCES];
for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
res->flags = 0;
bus->resource[i] = res;
++res;
}
i = 1;
for (; len >= 32; len -= 32, ranges += 8) {
flags = pci_parse_of_flags(ranges[0]);
size = of_read_number(&ranges[6], 2);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (flags == 0 || size == 0)
continue;
if (flags & IORESOURCE_IO) {
res = bus->resource[0];
if (res->flags) {
printk(KERN_ERR "PCI: ignoring extra I/O range"
" for bridge %s\n", node->full_name);
continue;
}
} else {
if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
printk(KERN_ERR "PCI: too many memory ranges"
" for bridge %s\n", node->full_name);
continue;
}
res = bus->resource[i];
++i;
}
res->start = of_read_number(&ranges[1], 2);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
res->end = res->start + size - 1;
res->flags = flags;
}
sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
bus->number);
DBG(" bus name: %s\n", bus->name);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
mode = PCI_PROBE_NORMAL;
if (ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
DBG(" probe mode: %d\n", mode);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (mode == PCI_PROBE_DEVTREE)
of_scan_bus(node, bus);
else if (mode == PCI_PROBE_NORMAL)
pci_scan_child_bus(bus);
}
EXPORT_SYMBOL(of_scan_pci_bridge);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
void __devinit scan_phb(struct pci_controller *hose)
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
{
struct pci_bus *bus;
struct device_node *node = hose->dn;
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
int i, mode;
DBG("PCI: Scanning PHB %s\n", node ? node->full_name : "<NO NAME>");
/* Create an empty bus for the toplevel */
bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (bus == NULL) {
printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
hose->global_number);
return;
}
bus->secondary = hose->first_busno;
hose->bus = bus;
/* Get some IO space for the new PHB */
pcibios_map_io_space(bus);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
/* Wire up PHB bus resources */
DBG("PCI: PHB IO resource = %016lx-%016lx [%lx]\n",
hose->io_resource.start, hose->io_resource.end,
hose->io_resource.flags);
bus->resource[0] = &hose->io_resource;
for (i = 0; i < 3; ++i) {
DBG("PCI: PHB MEM resource %d = %016lx-%016lx [%lx]\n", i,
hose->mem_resources[i].start,
hose->mem_resources[i].end,
hose->mem_resources[i].flags);
bus->resource[i+1] = &hose->mem_resources[i];
}
DBG("PCI: PHB MEM offset = %016lx\n", hose->pci_mem_offset);
DBG("PCI: PHB IO offset = %08lx\n",
(unsigned long)hose->io_base_virt - _IO_BASE);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
/* Get probe mode and perform scan */
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
mode = PCI_PROBE_NORMAL;
if (node && ppc_md.pci_probe_mode)
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
mode = ppc_md.pci_probe_mode(bus);
DBG(" probe mode: %d\n", mode);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (mode == PCI_PROBE_DEVTREE) {
bus->subordinate = hose->last_busno;
of_scan_bus(node, bus);
}
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
if (mode == PCI_PROBE_NORMAL)
hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
}
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
printk(KERN_INFO "PCI: Probing PCI hardware\n");
/* For now, override phys_mem_access_prot. If we need it,
* later, we may move that initialization to each ppc_md
*/
ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
if (pci_probe_only)
ppc_pci_flags |= PPC_PCI_PROBE_ONLY;
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
scan_phb(hose);
pci_bus_add_devices(hose->bus);
}
/* Call common code to handle resource allocation */
pcibios_resource_survey();
printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
return 0;
}
subsys_initcall(pcibios_init);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
#ifdef CONFIG_HOTPLUG
int pcibios_unmap_io_space(struct pci_bus *bus)
{
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
struct pci_controller *hose;
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
WARN_ON(bus == NULL);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
/* If this is not a PHB, we only flush the hash table over
* the area mapped by this bridge. We don't play with the PTE
* mappings since we might have to deal with sub-page alignemnts
* so flushing the hash table is the only sane way to make sure
* that no hash entries are covering that removed bridge area
* while still allowing other busses overlapping those pages
*/
if (bus->self) {
struct resource *res = bus->resource[0];
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
DBG("IO unmapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
__flush_hash_table_range(&init_mm, res->start + _IO_BASE,
res->end - res->start + 1);
return 0;
}
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
/* Get the host bridge */
hose = pci_bus_to_host(bus);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
/* Check if we have IOs allocated */
if (hose->io_base_alloc == 0)
return 0;
DBG("IO unmapping for PHB %s\n", hose->dn->full_name);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
DBG(" alloc=0x%p\n", hose->io_base_alloc);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
/* This is a PHB, we fully unmap the IO area */
vunmap(hose->io_base_alloc);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
return 0;
}
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
EXPORT_SYMBOL_GPL(pcibios_unmap_io_space);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
#endif /* CONFIG_HOTPLUG */
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
int __devinit pcibios_map_io_space(struct pci_bus *bus)
{
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
struct vm_struct *area;
unsigned long phys_page;
unsigned long size_page;
unsigned long io_virt_offset;
struct pci_controller *hose;
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
WARN_ON(bus == NULL);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
/* If this not a PHB, nothing to do, page tables still exist and
* thus HPTEs will be faulted in when needed
*/
if (bus->self) {
DBG("IO mapping for PCI-PCI bridge %s\n",
pci_name(bus->self));
DBG(" virt=0x%016lx...0x%016lx\n",
bus->resource[0]->start + _IO_BASE,
bus->resource[0]->end + _IO_BASE);
return 0;
}
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
/* Get the host bridge */
hose = pci_bus_to_host(bus);
phys_page = _ALIGN_DOWN(hose->io_base_phys, PAGE_SIZE);
size_page = _ALIGN_UP(hose->pci_io_size, PAGE_SIZE);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
/* Make sure IO area address is clear */
hose->io_base_alloc = NULL;
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
/* If there's no IO to map on that bus, get away too */
if (hose->pci_io_size == 0 || hose->io_base_phys == 0)
return 0;
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
/* Let's allocate some IO space for that guy. We don't pass
* VM_IOREMAP because we don't care about alignment tricks that
* the core does in that case. Maybe we should due to stupid card
* with incomplete address decoding but I'd rather not deal with
* those outside of the reserved 64K legacy region.
*/
area = __get_vm_area(size_page, 0, PHB_IO_BASE, PHB_IO_END);
if (area == NULL)
return -ENOMEM;
hose->io_base_alloc = area->addr;
hose->io_base_virt = (void __iomem *)(area->addr +
hose->io_base_phys - phys_page);
DBG("IO mapping for PHB %s\n", hose->dn->full_name);
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
DBG(" phys=0x%016lx, virt=0x%p (alloc=0x%p)\n",
hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
DBG(" size=0x%016lx (alloc=0x%016lx)\n",
hose->pci_io_size, size_page);
/* Establish the mapping */
if (__ioremap_at(phys_page, area->addr, size_page,
_PAGE_NO_CACHE | _PAGE_GUARDED) == NULL)
return -ENOMEM;
/* Fixup hose IO resource */
io_virt_offset = (unsigned long)hose->io_base_virt - _IO_BASE;
hose->io_resource.start += io_virt_offset;
hose->io_resource.end += io_virt_offset;
DBG(" hose->io_resource=0x%016lx...0x%016lx\n",
hose->io_resource.start, hose->io_resource.end);
return 0;
}
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
EXPORT_SYMBOL_GPL(pcibios_map_io_space);
void __devinit pcibios_setup_new_device(struct pci_dev *dev)
{
struct dev_archdata *sd = &dev->dev.archdata;
sd->of_node = pci_device_to_OF_node(dev);
DBG("PCI: device %s OF node: %s\n", pci_name(dev),
sd->of_node ? sd->of_node->full_name : "<none>");
sd->dma_ops = pci_dma_ops;
#ifdef CONFIG_NUMA
sd->numa_node = pcibus_to_node(dev->bus);
#else
sd->numa_node = -1;
#endif
if (ppc_md.pci_dma_dev_setup)
ppc_md.pci_dma_dev_setup(dev);
}
EXPORT_SYMBOL(pcibios_setup_new_device);
void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
{
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
struct pci_dev *dev;
if (ppc_md.pci_dma_bus_setup)
ppc_md.pci_dma_bus_setup(bus);
ppc64: Set up PCI tree from Open Firmware device tree This adds code which gives us the option on ppc64 of instantiating the PCI tree (the tree of pci_bus and pci_dev structs) from the Open Firmware device tree rather than by probing PCI configuration space. The OF device tree has a node for each PCI device and bridge in the system, with properties that tell us what addresses the firmware has configured for them and other details. There are a couple of reasons why this is needed. First, on systems with a hypervisor, there is a PCI-PCI bridge per slot under the PCI host bridges. These PCI-PCI bridges have special isolation features for virtualization. We can't write to their config space, and we are not supposed to be reading their config space either. The firmware tells us about the address ranges that they pass in the OF device tree. Secondly, on powermacs, the interrupt controller is in a PCI device that may be behind a PCI-PCI bridge. If we happened to take an interrupt just at the point when the device or a bridge on the path to it was disabled for probing, we would crash when we try to access the interrupt controller. I have implemented a platform-specific function which is called for each PCI bridge (host or PCI-PCI) to say whether the code should look in the device tree or use normal PCI probing for the devices under that bridge. On pSeries machines we use the device tree if we're running under a hypervisor, otherwise we use normal probing. On powermacs we use normal probing for the AGP bridge, since the device for the AGP bridge itself isn't shown in the device tree (at least on my G5), and the device tree for everything else. This has been tested on a dual G5 powermac, a partition on a POWER5 machine (running under the hypervisor), and a legacy iSeries partition. Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-12 03:17:36 -04:00
list_for_each_entry(dev, &bus->devices, bus_list)
pcibios_setup_new_device(dev);
}
unsigned long pci_address_to_pio(phys_addr_t address)
{
struct pci_controller *hose, *tmp;
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
if (address >= hose->io_base_phys &&
address < (hose->io_base_phys + hose->pci_io_size)) {
unsigned long base =
[POWERPC] Rewrite IO allocation & mapping on powerpc64 This rewrites pretty much from scratch the handling of MMIO and PIO space allocations on powerpc64. The main goals are: - Get rid of imalloc and use more common code where possible - Simplify the current mess so that PIO space is allocated and mapped in a single place for PCI bridges - Handle allocation constraints of PIO for all bridges including hot plugged ones within the 2GB space reserved for IO ports, so that devices on hotplugged busses will now work with drivers that assume IO ports fit in an int. - Cleanup and separate tracking of the ISA space in the reserved low 64K of IO space. No ISA -> Nothing mapped there. I booted a cell blade with IDE on PIO and MMIO and a dual G5 so far, that's it :-) With this patch, all allocations are done using the code in mm/vmalloc.c, though we use the low level __get_vm_area with explicit start/stop constraints in order to manage separate areas for vmalloc/vmap, ioremap, and PCI IOs. This greatly simplifies a lot of things, as you can see in the diffstat of that patch :-) A new pair of functions pcibios_map/unmap_io_space() now replace all of the previous code that used to manipulate PCI IOs space. The allocation is done at mapping time, which is now called from scan_phb's, just before the devices are probed (instead of after, which is by itself a bug fix). The only other caller is the PCI hotplug code for hot adding PCI-PCI bridges (slots). imalloc is gone, as is the "sub-allocation" thing, but I do beleive that hotplug should still work in the sense that the space allocation is always done by the PHB, but if you unmap a child bus of this PHB (which seems to be possible), then the code should properly tear down all the HPTE mappings for that area of the PHB allocated IO space. I now always reserve the first 64K of IO space for the bridge with the ISA bus on it. I have moved the code for tracking ISA in a separate file which should also make it smarter if we ever are capable of hot unplugging or re-plugging an ISA bridge. This should have a side effect on platforms like powermac where VGA IOs will no longer work. This is done on purpose though as they would have worked semi-randomly before. The idea at this point is to isolate drivers that might need to access those and fix them by providing a proper function to obtain an offset to the legacy IOs of a given bus. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-06-04 01:15:36 -04:00
(unsigned long)hose->io_base_virt - _IO_BASE;
return base + (address - hose->io_base_phys);
}
}
return (unsigned int)-1;
}
EXPORT_SYMBOL_GPL(pci_address_to_pio);
#define IOBASE_BRIDGE_NUMBER 0
#define IOBASE_MEMORY 1
#define IOBASE_IO 2
#define IOBASE_ISA_IO 3
#define IOBASE_ISA_MEM 4
long sys_pciconfig_iobase(long which, unsigned long in_bus,
unsigned long in_devfn)
{
struct pci_controller* hose;
struct list_head *ln;
struct pci_bus *bus = NULL;
struct device_node *hose_node;
/* Argh ! Please forgive me for that hack, but that's the
* simplest way to get existing XFree to not lockup on some
* G5 machines... So when something asks for bus 0 io base
* (bus 0 is HT root), we return the AGP one instead.
*/
if (machine_is_compatible("MacRISC4"))
if (in_bus == 0)
in_bus = 0xf0;
/* That syscall isn't quite compatible with PCI domains, but it's
* used on pre-domains setup. We return the first match
*/
for (ln = pci_root_buses.next; ln != &pci_root_buses; ln = ln->next) {
bus = pci_bus_b(ln);
if (in_bus >= bus->number && in_bus <= bus->subordinate)
break;
bus = NULL;
}
if (bus == NULL || bus->sysdata == NULL)
return -ENODEV;
hose_node = (struct device_node *)bus->sysdata;
hose = PCI_DN(hose_node)->phb;
switch (which) {
case IOBASE_BRIDGE_NUMBER:
return (long)hose->first_busno;
case IOBASE_MEMORY:
return (long)hose->pci_mem_offset;
case IOBASE_IO:
return (long)hose->io_base_phys;
case IOBASE_ISA_IO:
return (long)isa_io_base;
case IOBASE_ISA_MEM:
return -EINVAL;
}
return -EOPNOTSUPP;
}
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *bus)
{
struct pci_controller *phb = pci_bus_to_host(bus);
return phb->node;
}
EXPORT_SYMBOL(pcibus_to_node);
#endif