android_kernel_xiaomi_sm8350/drivers/media/video/v4l2-ctrls.c

1857 lines
51 KiB
C
Raw Normal View History

V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
/*
V4L2 controls framework implementation.
Copyright (C) 2010 Hans Verkuil <hverkuil@xs4all.nl>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/ctype.h>
#include <linux/slab.h>
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
#include <media/v4l2-ioctl.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-dev.h>
/* Internal temporary helper struct, one for each v4l2_ext_control */
struct ctrl_helper {
/* The control corresponding to the v4l2_ext_control ID field. */
struct v4l2_ctrl *ctrl;
/* Used internally to mark whether this control was already
processed. */
bool handled;
};
/* Returns NULL or a character pointer array containing the menu for
the given control ID. The pointer array ends with a NULL pointer.
An empty string signifies a menu entry that is invalid. This allows
drivers to disable certain options if it is not supported. */
const char **v4l2_ctrl_get_menu(u32 id)
{
static const char *mpeg_audio_sampling_freq[] = {
"44.1 kHz",
"48 kHz",
"32 kHz",
NULL
};
static const char *mpeg_audio_encoding[] = {
"MPEG-1/2 Layer I",
"MPEG-1/2 Layer II",
"MPEG-1/2 Layer III",
"MPEG-2/4 AAC",
"AC-3",
NULL
};
static const char *mpeg_audio_l1_bitrate[] = {
"32 kbps",
"64 kbps",
"96 kbps",
"128 kbps",
"160 kbps",
"192 kbps",
"224 kbps",
"256 kbps",
"288 kbps",
"320 kbps",
"352 kbps",
"384 kbps",
"416 kbps",
"448 kbps",
NULL
};
static const char *mpeg_audio_l2_bitrate[] = {
"32 kbps",
"48 kbps",
"56 kbps",
"64 kbps",
"80 kbps",
"96 kbps",
"112 kbps",
"128 kbps",
"160 kbps",
"192 kbps",
"224 kbps",
"256 kbps",
"320 kbps",
"384 kbps",
NULL
};
static const char *mpeg_audio_l3_bitrate[] = {
"32 kbps",
"40 kbps",
"48 kbps",
"56 kbps",
"64 kbps",
"80 kbps",
"96 kbps",
"112 kbps",
"128 kbps",
"160 kbps",
"192 kbps",
"224 kbps",
"256 kbps",
"320 kbps",
NULL
};
static const char *mpeg_audio_ac3_bitrate[] = {
"32 kbps",
"40 kbps",
"48 kbps",
"56 kbps",
"64 kbps",
"80 kbps",
"96 kbps",
"112 kbps",
"128 kbps",
"160 kbps",
"192 kbps",
"224 kbps",
"256 kbps",
"320 kbps",
"384 kbps",
"448 kbps",
"512 kbps",
"576 kbps",
"640 kbps",
NULL
};
static const char *mpeg_audio_mode[] = {
"Stereo",
"Joint Stereo",
"Dual",
"Mono",
NULL
};
static const char *mpeg_audio_mode_extension[] = {
"Bound 4",
"Bound 8",
"Bound 12",
"Bound 16",
NULL
};
static const char *mpeg_audio_emphasis[] = {
"No Emphasis",
"50/15 us",
"CCITT J17",
NULL
};
static const char *mpeg_audio_crc[] = {
"No CRC",
"16-bit CRC",
NULL
};
static const char *mpeg_video_encoding[] = {
"MPEG-1",
"MPEG-2",
"MPEG-4 AVC",
NULL
};
static const char *mpeg_video_aspect[] = {
"1x1",
"4x3",
"16x9",
"2.21x1",
NULL
};
static const char *mpeg_video_bitrate_mode[] = {
"Variable Bitrate",
"Constant Bitrate",
NULL
};
static const char *mpeg_stream_type[] = {
"MPEG-2 Program Stream",
"MPEG-2 Transport Stream",
"MPEG-1 System Stream",
"MPEG-2 DVD-compatible Stream",
"MPEG-1 VCD-compatible Stream",
"MPEG-2 SVCD-compatible Stream",
NULL
};
static const char *mpeg_stream_vbi_fmt[] = {
"No VBI",
"Private packet, IVTV format",
NULL
};
static const char *camera_power_line_frequency[] = {
"Disabled",
"50 Hz",
"60 Hz",
NULL
};
static const char *camera_exposure_auto[] = {
"Auto Mode",
"Manual Mode",
"Shutter Priority Mode",
"Aperture Priority Mode",
NULL
};
static const char *colorfx[] = {
"None",
"Black & White",
"Sepia",
"Negative",
"Emboss",
"Sketch",
"Sky blue",
"Grass green",
"Skin whiten",
"Vivid",
NULL
};
static const char *tune_preemphasis[] = {
"No preemphasis",
"50 useconds",
"75 useconds",
NULL,
};
switch (id) {
case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
return mpeg_audio_sampling_freq;
case V4L2_CID_MPEG_AUDIO_ENCODING:
return mpeg_audio_encoding;
case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
return mpeg_audio_l1_bitrate;
case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
return mpeg_audio_l2_bitrate;
case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
return mpeg_audio_l3_bitrate;
case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
return mpeg_audio_ac3_bitrate;
case V4L2_CID_MPEG_AUDIO_MODE:
return mpeg_audio_mode;
case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
return mpeg_audio_mode_extension;
case V4L2_CID_MPEG_AUDIO_EMPHASIS:
return mpeg_audio_emphasis;
case V4L2_CID_MPEG_AUDIO_CRC:
return mpeg_audio_crc;
case V4L2_CID_MPEG_VIDEO_ENCODING:
return mpeg_video_encoding;
case V4L2_CID_MPEG_VIDEO_ASPECT:
return mpeg_video_aspect;
case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
return mpeg_video_bitrate_mode;
case V4L2_CID_MPEG_STREAM_TYPE:
return mpeg_stream_type;
case V4L2_CID_MPEG_STREAM_VBI_FMT:
return mpeg_stream_vbi_fmt;
case V4L2_CID_POWER_LINE_FREQUENCY:
return camera_power_line_frequency;
case V4L2_CID_EXPOSURE_AUTO:
return camera_exposure_auto;
case V4L2_CID_COLORFX:
return colorfx;
case V4L2_CID_TUNE_PREEMPHASIS:
return tune_preemphasis;
default:
return NULL;
}
}
EXPORT_SYMBOL(v4l2_ctrl_get_menu);
/* Return the control name. */
const char *v4l2_ctrl_get_name(u32 id)
{
switch (id) {
/* USER controls */
/* Keep the order of the 'case's the same as in videodev2.h! */
case V4L2_CID_USER_CLASS: return "User Controls";
case V4L2_CID_BRIGHTNESS: return "Brightness";
case V4L2_CID_CONTRAST: return "Contrast";
case V4L2_CID_SATURATION: return "Saturation";
case V4L2_CID_HUE: return "Hue";
case V4L2_CID_AUDIO_VOLUME: return "Volume";
case V4L2_CID_AUDIO_BALANCE: return "Balance";
case V4L2_CID_AUDIO_BASS: return "Bass";
case V4L2_CID_AUDIO_TREBLE: return "Treble";
case V4L2_CID_AUDIO_MUTE: return "Mute";
case V4L2_CID_AUDIO_LOUDNESS: return "Loudness";
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
case V4L2_CID_BLACK_LEVEL: return "Black Level";
case V4L2_CID_AUTO_WHITE_BALANCE: return "White Balance, Automatic";
case V4L2_CID_DO_WHITE_BALANCE: return "Do White Balance";
case V4L2_CID_RED_BALANCE: return "Red Balance";
case V4L2_CID_BLUE_BALANCE: return "Blue Balance";
case V4L2_CID_GAMMA: return "Gamma";
case V4L2_CID_EXPOSURE: return "Exposure";
case V4L2_CID_AUTOGAIN: return "Gain, Automatic";
case V4L2_CID_GAIN: return "Gain";
case V4L2_CID_HFLIP: return "Horizontal Flip";
case V4L2_CID_VFLIP: return "Vertical Flip";
case V4L2_CID_HCENTER: return "Horizontal Center";
case V4L2_CID_VCENTER: return "Vertical Center";
case V4L2_CID_POWER_LINE_FREQUENCY: return "Power Line Frequency";
case V4L2_CID_HUE_AUTO: return "Hue, Automatic";
case V4L2_CID_WHITE_BALANCE_TEMPERATURE: return "White Balance Temperature";
case V4L2_CID_SHARPNESS: return "Sharpness";
case V4L2_CID_BACKLIGHT_COMPENSATION: return "Backlight Compensation";
case V4L2_CID_CHROMA_AGC: return "Chroma AGC";
case V4L2_CID_COLOR_KILLER: return "Color Killer";
case V4L2_CID_COLORFX: return "Color Effects";
case V4L2_CID_AUTOBRIGHTNESS: return "Brightness, Automatic";
case V4L2_CID_BAND_STOP_FILTER: return "Band-Stop Filter";
case V4L2_CID_ROTATE: return "Rotate";
case V4L2_CID_BG_COLOR: return "Background Color";
case V4L2_CID_CHROMA_GAIN: return "Chroma Gain";
case V4L2_CID_ILLUMINATORS_1: return "Illuminator 1";
case V4L2_CID_ILLUMINATORS_2: return "Illuminator 2";
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
/* MPEG controls */
/* Keep the order of the 'case's the same as in videodev2.h! */
case V4L2_CID_MPEG_CLASS: return "MPEG Encoder Controls";
case V4L2_CID_MPEG_STREAM_TYPE: return "Stream Type";
case V4L2_CID_MPEG_STREAM_PID_PMT: return "Stream PMT Program ID";
case V4L2_CID_MPEG_STREAM_PID_AUDIO: return "Stream Audio Program ID";
case V4L2_CID_MPEG_STREAM_PID_VIDEO: return "Stream Video Program ID";
case V4L2_CID_MPEG_STREAM_PID_PCR: return "Stream PCR Program ID";
case V4L2_CID_MPEG_STREAM_PES_ID_AUDIO: return "Stream PES Audio ID";
case V4L2_CID_MPEG_STREAM_PES_ID_VIDEO: return "Stream PES Video ID";
case V4L2_CID_MPEG_STREAM_VBI_FMT: return "Stream VBI Format";
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ: return "Audio Sampling Frequency";
case V4L2_CID_MPEG_AUDIO_ENCODING: return "Audio Encoding";
case V4L2_CID_MPEG_AUDIO_L1_BITRATE: return "Audio Layer I Bitrate";
case V4L2_CID_MPEG_AUDIO_L2_BITRATE: return "Audio Layer II Bitrate";
case V4L2_CID_MPEG_AUDIO_L3_BITRATE: return "Audio Layer III Bitrate";
case V4L2_CID_MPEG_AUDIO_MODE: return "Audio Stereo Mode";
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION: return "Audio Stereo Mode Extension";
case V4L2_CID_MPEG_AUDIO_EMPHASIS: return "Audio Emphasis";
case V4L2_CID_MPEG_AUDIO_CRC: return "Audio CRC";
case V4L2_CID_MPEG_AUDIO_MUTE: return "Audio Mute";
case V4L2_CID_MPEG_AUDIO_AAC_BITRATE: return "Audio AAC Bitrate";
case V4L2_CID_MPEG_AUDIO_AC3_BITRATE: return "Audio AC-3 Bitrate";
case V4L2_CID_MPEG_VIDEO_ENCODING: return "Video Encoding";
case V4L2_CID_MPEG_VIDEO_ASPECT: return "Video Aspect";
case V4L2_CID_MPEG_VIDEO_B_FRAMES: return "Video B Frames";
case V4L2_CID_MPEG_VIDEO_GOP_SIZE: return "Video GOP Size";
case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE: return "Video GOP Closure";
case V4L2_CID_MPEG_VIDEO_PULLDOWN: return "Video Pulldown";
case V4L2_CID_MPEG_VIDEO_BITRATE_MODE: return "Video Bitrate Mode";
case V4L2_CID_MPEG_VIDEO_BITRATE: return "Video Bitrate";
case V4L2_CID_MPEG_VIDEO_BITRATE_PEAK: return "Video Peak Bitrate";
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
case V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION: return "Video Temporal Decimation";
case V4L2_CID_MPEG_VIDEO_MUTE: return "Video Mute";
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
case V4L2_CID_MPEG_VIDEO_MUTE_YUV: return "Video Mute YUV";
/* CAMERA controls */
/* Keep the order of the 'case's the same as in videodev2.h! */
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
case V4L2_CID_CAMERA_CLASS: return "Camera Controls";
case V4L2_CID_EXPOSURE_AUTO: return "Auto Exposure";
case V4L2_CID_EXPOSURE_ABSOLUTE: return "Exposure Time, Absolute";
case V4L2_CID_EXPOSURE_AUTO_PRIORITY: return "Exposure, Dynamic Framerate";
case V4L2_CID_PAN_RELATIVE: return "Pan, Relative";
case V4L2_CID_TILT_RELATIVE: return "Tilt, Relative";
case V4L2_CID_PAN_RESET: return "Pan, Reset";
case V4L2_CID_TILT_RESET: return "Tilt, Reset";
case V4L2_CID_PAN_ABSOLUTE: return "Pan, Absolute";
case V4L2_CID_TILT_ABSOLUTE: return "Tilt, Absolute";
case V4L2_CID_FOCUS_ABSOLUTE: return "Focus, Absolute";
case V4L2_CID_FOCUS_RELATIVE: return "Focus, Relative";
case V4L2_CID_FOCUS_AUTO: return "Focus, Automatic";
case V4L2_CID_ZOOM_ABSOLUTE: return "Zoom, Absolute";
case V4L2_CID_ZOOM_RELATIVE: return "Zoom, Relative";
case V4L2_CID_ZOOM_CONTINUOUS: return "Zoom, Continuous";
case V4L2_CID_PRIVACY: return "Privacy";
case V4L2_CID_IRIS_ABSOLUTE: return "Iris, Absolute";
case V4L2_CID_IRIS_RELATIVE: return "Iris, Relative";
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
/* FM Radio Modulator control */
/* Keep the order of the 'case's the same as in videodev2.h! */
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
case V4L2_CID_FM_TX_CLASS: return "FM Radio Modulator Controls";
case V4L2_CID_RDS_TX_DEVIATION: return "RDS Signal Deviation";
case V4L2_CID_RDS_TX_PI: return "RDS Program ID";
case V4L2_CID_RDS_TX_PTY: return "RDS Program Type";
case V4L2_CID_RDS_TX_PS_NAME: return "RDS PS Name";
case V4L2_CID_RDS_TX_RADIO_TEXT: return "RDS Radio Text";
case V4L2_CID_AUDIO_LIMITER_ENABLED: return "Audio Limiter Feature Enabled";
case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME: return "Audio Limiter Release Time";
case V4L2_CID_AUDIO_LIMITER_DEVIATION: return "Audio Limiter Deviation";
case V4L2_CID_AUDIO_COMPRESSION_ENABLED: return "Audio Compression Feature Enabled";
case V4L2_CID_AUDIO_COMPRESSION_GAIN: return "Audio Compression Gain";
case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD: return "Audio Compression Threshold";
case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME: return "Audio Compression Attack Time";
case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME: return "Audio Compression Release Time";
case V4L2_CID_PILOT_TONE_ENABLED: return "Pilot Tone Feature Enabled";
case V4L2_CID_PILOT_TONE_DEVIATION: return "Pilot Tone Deviation";
case V4L2_CID_PILOT_TONE_FREQUENCY: return "Pilot Tone Frequency";
case V4L2_CID_TUNE_PREEMPHASIS: return "Pre-emphasis settings";
case V4L2_CID_TUNE_POWER_LEVEL: return "Tune Power Level";
case V4L2_CID_TUNE_ANTENNA_CAPACITOR: return "Tune Antenna Capacitor";
default:
return NULL;
}
}
EXPORT_SYMBOL(v4l2_ctrl_get_name);
void v4l2_ctrl_fill(u32 id, const char **name, enum v4l2_ctrl_type *type,
s32 *min, s32 *max, s32 *step, s32 *def, u32 *flags)
{
*name = v4l2_ctrl_get_name(id);
*flags = 0;
switch (id) {
case V4L2_CID_AUDIO_MUTE:
case V4L2_CID_AUDIO_LOUDNESS:
case V4L2_CID_AUTO_WHITE_BALANCE:
case V4L2_CID_AUTOGAIN:
case V4L2_CID_HFLIP:
case V4L2_CID_VFLIP:
case V4L2_CID_HUE_AUTO:
case V4L2_CID_CHROMA_AGC:
case V4L2_CID_COLOR_KILLER:
case V4L2_CID_MPEG_AUDIO_MUTE:
case V4L2_CID_MPEG_VIDEO_MUTE:
case V4L2_CID_MPEG_VIDEO_GOP_CLOSURE:
case V4L2_CID_MPEG_VIDEO_PULLDOWN:
case V4L2_CID_EXPOSURE_AUTO_PRIORITY:
case V4L2_CID_FOCUS_AUTO:
case V4L2_CID_PRIVACY:
case V4L2_CID_AUDIO_LIMITER_ENABLED:
case V4L2_CID_AUDIO_COMPRESSION_ENABLED:
case V4L2_CID_PILOT_TONE_ENABLED:
case V4L2_CID_ILLUMINATORS_1:
case V4L2_CID_ILLUMINATORS_2:
V4L/DVB: v4l2: Add new control handling framework Add a new framework to handle controls which makes life for driver developers much easier. Note that this patch moves some of the control support that used to be in v4l2-common.c to v4l2-ctrls.c. The tables were copied unchanged. The body of v4l2_ctrl_query_fill() was copied to a new v4l2_ctrl_fill() function in v4l2-ctrls.c. This new function doesn't use the v4l2_queryctrl struct anymore, which makes it more general. The remainder of v4l2-ctrls.c is all new. Highlights include: - No need to implement VIDIOC_QUERYCTRL, QUERYMENU, S_CTRL, G_CTRL, S_EXT_CTRLS, G_EXT_CTRLS or TRY_EXT_CTRLS in either bridge drivers or subdevs. New wrapper functions are provided that can just be plugged in. Once everything has been converted these wrapper functions can be removed as well. - When subdevices are added their controls can be automatically merged with the bridge driver's controls. - Most drivers just need to implement s_ctrl to set the controls. The framework handles the locking and tries to be as 'atomic' as possible. - Ready for the subdev device nodes: the same mechanism applies to subdevs and their device nodes as well. Sub-device drivers can make controls local, preventing them from being merged with bridge drivers. - Takes care of backwards compatibility handling of VIDIOC_S_CTRL and VIDIOC_G_CTRL. Handling of V4L2_CID_PRIVATE_BASE is fully transparent. CTRL_CLASS controls are automatically added. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-08-01 13:32:42 -04:00
*type = V4L2_CTRL_TYPE_BOOLEAN;
*min = 0;
*max = *step = 1;
break;
case V4L2_CID_PAN_RESET:
case V4L2_CID_TILT_RESET:
*type = V4L2_CTRL_TYPE_BUTTON;
*flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
*min = *max = *step = *def = 0;
break;
case V4L2_CID_POWER_LINE_FREQUENCY:
case V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ:
case V4L2_CID_MPEG_AUDIO_ENCODING:
case V4L2_CID_MPEG_AUDIO_L1_BITRATE:
case V4L2_CID_MPEG_AUDIO_L2_BITRATE:
case V4L2_CID_MPEG_AUDIO_L3_BITRATE:
case V4L2_CID_MPEG_AUDIO_AC3_BITRATE:
case V4L2_CID_MPEG_AUDIO_MODE:
case V4L2_CID_MPEG_AUDIO_MODE_EXTENSION:
case V4L2_CID_MPEG_AUDIO_EMPHASIS:
case V4L2_CID_MPEG_AUDIO_CRC:
case V4L2_CID_MPEG_VIDEO_ENCODING:
case V4L2_CID_MPEG_VIDEO_ASPECT:
case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
case V4L2_CID_MPEG_STREAM_TYPE:
case V4L2_CID_MPEG_STREAM_VBI_FMT:
case V4L2_CID_EXPOSURE_AUTO:
case V4L2_CID_COLORFX:
case V4L2_CID_TUNE_PREEMPHASIS:
*type = V4L2_CTRL_TYPE_MENU;
break;
case V4L2_CID_RDS_TX_PS_NAME:
case V4L2_CID_RDS_TX_RADIO_TEXT:
*type = V4L2_CTRL_TYPE_STRING;
break;
case V4L2_CID_USER_CLASS:
case V4L2_CID_CAMERA_CLASS:
case V4L2_CID_MPEG_CLASS:
case V4L2_CID_FM_TX_CLASS:
*type = V4L2_CTRL_TYPE_CTRL_CLASS;
/* You can neither read not write these */
*flags |= V4L2_CTRL_FLAG_READ_ONLY | V4L2_CTRL_FLAG_WRITE_ONLY;
*min = *max = *step = *def = 0;
break;
case V4L2_CID_BG_COLOR:
*type = V4L2_CTRL_TYPE_INTEGER;
*step = 1;
*min = 0;
/* Max is calculated as RGB888 that is 2^24 */
*max = 0xFFFFFF;
break;
default:
*type = V4L2_CTRL_TYPE_INTEGER;
break;
}
switch (id) {
case V4L2_CID_MPEG_AUDIO_ENCODING:
case V4L2_CID_MPEG_AUDIO_MODE:
case V4L2_CID_MPEG_VIDEO_BITRATE_MODE:
case V4L2_CID_MPEG_VIDEO_B_FRAMES:
case V4L2_CID_MPEG_STREAM_TYPE:
*flags |= V4L2_CTRL_FLAG_UPDATE;
break;
case V4L2_CID_AUDIO_VOLUME:
case V4L2_CID_AUDIO_BALANCE:
case V4L2_CID_AUDIO_BASS:
case V4L2_CID_AUDIO_TREBLE:
case V4L2_CID_BRIGHTNESS:
case V4L2_CID_CONTRAST:
case V4L2_CID_SATURATION:
case V4L2_CID_HUE:
case V4L2_CID_RED_BALANCE:
case V4L2_CID_BLUE_BALANCE:
case V4L2_CID_GAMMA:
case V4L2_CID_SHARPNESS:
case V4L2_CID_CHROMA_GAIN:
case V4L2_CID_RDS_TX_DEVIATION:
case V4L2_CID_AUDIO_LIMITER_RELEASE_TIME:
case V4L2_CID_AUDIO_LIMITER_DEVIATION:
case V4L2_CID_AUDIO_COMPRESSION_GAIN:
case V4L2_CID_AUDIO_COMPRESSION_THRESHOLD:
case V4L2_CID_AUDIO_COMPRESSION_ATTACK_TIME:
case V4L2_CID_AUDIO_COMPRESSION_RELEASE_TIME:
case V4L2_CID_PILOT_TONE_DEVIATION:
case V4L2_CID_PILOT_TONE_FREQUENCY:
case V4L2_CID_TUNE_POWER_LEVEL:
case V4L2_CID_TUNE_ANTENNA_CAPACITOR:
*flags |= V4L2_CTRL_FLAG_SLIDER;
break;
case V4L2_CID_PAN_RELATIVE:
case V4L2_CID_TILT_RELATIVE:
case V4L2_CID_FOCUS_RELATIVE:
case V4L2_CID_IRIS_RELATIVE:
case V4L2_CID_ZOOM_RELATIVE:
*flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
break;
}
}
EXPORT_SYMBOL(v4l2_ctrl_fill);
/* Helper function to determine whether the control type is compatible with
VIDIOC_G/S_CTRL. */
static bool type_is_int(const struct v4l2_ctrl *ctrl)
{
switch (ctrl->type) {
case V4L2_CTRL_TYPE_INTEGER64:
case V4L2_CTRL_TYPE_STRING:
/* Nope, these need v4l2_ext_control */
return false;
default:
return true;
}
}
/* Helper function: copy the current control value back to the caller */
static int cur_to_user(struct v4l2_ext_control *c,
struct v4l2_ctrl *ctrl)
{
u32 len;
switch (ctrl->type) {
case V4L2_CTRL_TYPE_STRING:
len = strlen(ctrl->cur.string);
if (c->size < len + 1) {
c->size = len + 1;
return -ENOSPC;
}
return copy_to_user(c->string, ctrl->cur.string,
len + 1) ? -EFAULT : 0;
case V4L2_CTRL_TYPE_INTEGER64:
c->value64 = ctrl->cur.val64;
break;
default:
c->value = ctrl->cur.val;
break;
}
return 0;
}
/* Helper function: copy the caller-provider value as the new control value */
static int user_to_new(struct v4l2_ext_control *c,
struct v4l2_ctrl *ctrl)
{
int ret;
u32 size;
ctrl->has_new = 1;
switch (ctrl->type) {
case V4L2_CTRL_TYPE_INTEGER64:
ctrl->val64 = c->value64;
break;
case V4L2_CTRL_TYPE_STRING:
size = c->size;
if (size == 0)
return -ERANGE;
if (size > ctrl->maximum + 1)
size = ctrl->maximum + 1;
ret = copy_from_user(ctrl->string, c->string, size);
if (!ret) {
char last = ctrl->string[size - 1];
ctrl->string[size - 1] = 0;
/* If the string was longer than ctrl->maximum,
then return an error. */
if (strlen(ctrl->string) == ctrl->maximum && last)
return -ERANGE;
}
return ret ? -EFAULT : 0;
default:
ctrl->val = c->value;
break;
}
return 0;
}
/* Helper function: copy the new control value back to the caller */
static int new_to_user(struct v4l2_ext_control *c,
struct v4l2_ctrl *ctrl)
{
u32 len;
switch (ctrl->type) {
case V4L2_CTRL_TYPE_STRING:
len = strlen(ctrl->string);
if (c->size < len + 1) {
c->size = ctrl->maximum + 1;
return -ENOSPC;
}
return copy_to_user(c->string, ctrl->string,
len + 1) ? -EFAULT : 0;
case V4L2_CTRL_TYPE_INTEGER64:
c->value64 = ctrl->val64;
break;
default:
c->value = ctrl->val;
break;
}
return 0;
}
/* Copy the new value to the current value. */
static void new_to_cur(struct v4l2_ctrl *ctrl)
{
if (ctrl == NULL)
return;
switch (ctrl->type) {
case V4L2_CTRL_TYPE_STRING:
/* strings are always 0-terminated */
strcpy(ctrl->cur.string, ctrl->string);
break;
case V4L2_CTRL_TYPE_INTEGER64:
ctrl->cur.val64 = ctrl->val64;
break;
default:
ctrl->cur.val = ctrl->val;
break;
}
}
/* Copy the current value to the new value */
static void cur_to_new(struct v4l2_ctrl *ctrl)
{
if (ctrl == NULL)
return;
switch (ctrl->type) {
case V4L2_CTRL_TYPE_STRING:
/* strings are always 0-terminated */
strcpy(ctrl->string, ctrl->cur.string);
break;
case V4L2_CTRL_TYPE_INTEGER64:
ctrl->val64 = ctrl->cur.val64;
break;
default:
ctrl->val = ctrl->cur.val;
break;
}
}
/* Return non-zero if one or more of the controls in the cluster has a new
value that differs from the current value. */
static int cluster_changed(struct v4l2_ctrl *master)
{
int diff = 0;
int i;
for (i = 0; !diff && i < master->ncontrols; i++) {
struct v4l2_ctrl *ctrl = master->cluster[i];
if (ctrl == NULL)
continue;
switch (ctrl->type) {
case V4L2_CTRL_TYPE_BUTTON:
/* Button controls are always 'different' */
return 1;
case V4L2_CTRL_TYPE_STRING:
/* strings are always 0-terminated */
diff = strcmp(ctrl->string, ctrl->cur.string);
break;
case V4L2_CTRL_TYPE_INTEGER64:
diff = ctrl->val64 != ctrl->cur.val64;
break;
default:
diff = ctrl->val != ctrl->cur.val;
break;
}
}
return diff;
}
/* Validate a new control */
static int validate_new(struct v4l2_ctrl *ctrl)
{
s32 val = ctrl->val;
char *s = ctrl->string;
u32 offset;
size_t len;
switch (ctrl->type) {
case V4L2_CTRL_TYPE_INTEGER:
/* Round towards the closest legal value */
val += ctrl->step / 2;
if (val < ctrl->minimum)
val = ctrl->minimum;
if (val > ctrl->maximum)
val = ctrl->maximum;
offset = val - ctrl->minimum;
offset = ctrl->step * (offset / ctrl->step);
val = ctrl->minimum + offset;
ctrl->val = val;
return 0;
case V4L2_CTRL_TYPE_BOOLEAN:
ctrl->val = !!ctrl->val;
return 0;
case V4L2_CTRL_TYPE_MENU:
if (val < ctrl->minimum || val > ctrl->maximum)
return -ERANGE;
if (ctrl->qmenu[val][0] == '\0' ||
(ctrl->menu_skip_mask & (1 << val)))
return -EINVAL;
return 0;
case V4L2_CTRL_TYPE_BUTTON:
case V4L2_CTRL_TYPE_CTRL_CLASS:
ctrl->val64 = 0;
return 0;
case V4L2_CTRL_TYPE_INTEGER64:
return 0;
case V4L2_CTRL_TYPE_STRING:
len = strlen(s);
if (len < ctrl->minimum)
return -ERANGE;
if ((len - ctrl->minimum) % ctrl->step)
return -ERANGE;
return 0;
default:
return -EINVAL;
}
}
static inline u32 node2id(struct list_head *node)
{
return list_entry(node, struct v4l2_ctrl_ref, node)->ctrl->id;
}
/* Set the handler's error code if it wasn't set earlier already */
static inline int handler_set_err(struct v4l2_ctrl_handler *hdl, int err)
{
if (hdl->error == 0)
hdl->error = err;
return err;
}
/* Initialize the handler */
int v4l2_ctrl_handler_init(struct v4l2_ctrl_handler *hdl,
unsigned nr_of_controls_hint)
{
mutex_init(&hdl->lock);
INIT_LIST_HEAD(&hdl->ctrls);
INIT_LIST_HEAD(&hdl->ctrl_refs);
hdl->nr_of_buckets = 1 + nr_of_controls_hint / 8;
hdl->buckets = kzalloc(sizeof(hdl->buckets[0]) * hdl->nr_of_buckets,
GFP_KERNEL);
hdl->error = hdl->buckets ? 0 : -ENOMEM;
return hdl->error;
}
EXPORT_SYMBOL(v4l2_ctrl_handler_init);
/* Free all controls and control refs */
void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
{
struct v4l2_ctrl_ref *ref, *next_ref;
struct v4l2_ctrl *ctrl, *next_ctrl;
if (hdl == NULL || hdl->buckets == NULL)
return;
mutex_lock(&hdl->lock);
/* Free all nodes */
list_for_each_entry_safe(ref, next_ref, &hdl->ctrl_refs, node) {
list_del(&ref->node);
kfree(ref);
}
/* Free all controls owned by the handler */
list_for_each_entry_safe(ctrl, next_ctrl, &hdl->ctrls, node) {
list_del(&ctrl->node);
kfree(ctrl);
}
kfree(hdl->buckets);
hdl->buckets = NULL;
hdl->cached = NULL;
hdl->error = 0;
mutex_unlock(&hdl->lock);
}
EXPORT_SYMBOL(v4l2_ctrl_handler_free);
/* For backwards compatibility: V4L2_CID_PRIVATE_BASE should no longer
be used except in G_CTRL, S_CTRL, QUERYCTRL and QUERYMENU when dealing
with applications that do not use the NEXT_CTRL flag.
We just find the n-th private user control. It's O(N), but that should not
be an issue in this particular case. */
static struct v4l2_ctrl_ref *find_private_ref(
struct v4l2_ctrl_handler *hdl, u32 id)
{
struct v4l2_ctrl_ref *ref;
id -= V4L2_CID_PRIVATE_BASE;
list_for_each_entry(ref, &hdl->ctrl_refs, node) {
/* Search for private user controls that are compatible with
VIDIOC_G/S_CTRL. */
if (V4L2_CTRL_ID2CLASS(ref->ctrl->id) == V4L2_CTRL_CLASS_USER &&
V4L2_CTRL_DRIVER_PRIV(ref->ctrl->id)) {
if (!type_is_int(ref->ctrl))
continue;
if (id == 0)
return ref;
id--;
}
}
return NULL;
}
/* Find a control with the given ID. */
static struct v4l2_ctrl_ref *find_ref(struct v4l2_ctrl_handler *hdl, u32 id)
{
struct v4l2_ctrl_ref *ref;
int bucket;
id &= V4L2_CTRL_ID_MASK;
/* Old-style private controls need special handling */
if (id >= V4L2_CID_PRIVATE_BASE)
return find_private_ref(hdl, id);
bucket = id % hdl->nr_of_buckets;
/* Simple optimization: cache the last control found */
if (hdl->cached && hdl->cached->ctrl->id == id)
return hdl->cached;
/* Not in cache, search the hash */
ref = hdl->buckets ? hdl->buckets[bucket] : NULL;
while (ref && ref->ctrl->id != id)
ref = ref->next;
if (ref)
hdl->cached = ref; /* cache it! */
return ref;
}
/* Find a control with the given ID. Take the handler's lock first. */
static struct v4l2_ctrl_ref *find_ref_lock(
struct v4l2_ctrl_handler *hdl, u32 id)
{
struct v4l2_ctrl_ref *ref = NULL;
if (hdl) {
mutex_lock(&hdl->lock);
ref = find_ref(hdl, id);
mutex_unlock(&hdl->lock);
}
return ref;
}
/* Find a control with the given ID. */
struct v4l2_ctrl *v4l2_ctrl_find(struct v4l2_ctrl_handler *hdl, u32 id)
{
struct v4l2_ctrl_ref *ref = find_ref_lock(hdl, id);
return ref ? ref->ctrl : NULL;
}
EXPORT_SYMBOL(v4l2_ctrl_find);
/* Allocate a new v4l2_ctrl_ref and hook it into the handler. */
static int handler_new_ref(struct v4l2_ctrl_handler *hdl,
struct v4l2_ctrl *ctrl)
{
struct v4l2_ctrl_ref *ref;
struct v4l2_ctrl_ref *new_ref;
u32 id = ctrl->id;
u32 class_ctrl = V4L2_CTRL_ID2CLASS(id) | 1;
int bucket = id % hdl->nr_of_buckets; /* which bucket to use */
/* Automatically add the control class if it is not yet present. */
if (id != class_ctrl && find_ref_lock(hdl, class_ctrl) == NULL)
if (!v4l2_ctrl_new_std(hdl, NULL, class_ctrl, 0, 0, 0, 0))
return hdl->error;
if (hdl->error)
return hdl->error;
new_ref = kzalloc(sizeof(*new_ref), GFP_KERNEL);
if (!new_ref)
return handler_set_err(hdl, -ENOMEM);
new_ref->ctrl = ctrl;
if (ctrl->handler == hdl) {
/* By default each control starts in a cluster of its own.
new_ref->ctrl is basically a cluster array with one
element, so that's perfect to use as the cluster pointer.
But only do this for the handler that owns the control. */
ctrl->cluster = &new_ref->ctrl;
ctrl->ncontrols = 1;
}
INIT_LIST_HEAD(&new_ref->node);
mutex_lock(&hdl->lock);
/* Add immediately at the end of the list if the list is empty, or if
the last element in the list has a lower ID.
This ensures that when elements are added in ascending order the
insertion is an O(1) operation. */
if (list_empty(&hdl->ctrl_refs) || id > node2id(hdl->ctrl_refs.prev)) {
list_add_tail(&new_ref->node, &hdl->ctrl_refs);
goto insert_in_hash;
}
/* Find insert position in sorted list */
list_for_each_entry(ref, &hdl->ctrl_refs, node) {
if (ref->ctrl->id < id)
continue;
/* Don't add duplicates */
if (ref->ctrl->id == id) {
kfree(new_ref);
goto unlock;
}
list_add(&new_ref->node, ref->node.prev);
break;
}
insert_in_hash:
/* Insert the control node in the hash */
new_ref->next = hdl->buckets[bucket];
hdl->buckets[bucket] = new_ref;
unlock:
mutex_unlock(&hdl->lock);
return 0;
}
/* Add a new control */
static struct v4l2_ctrl *v4l2_ctrl_new(struct v4l2_ctrl_handler *hdl,
const struct v4l2_ctrl_ops *ops,
u32 id, const char *name, enum v4l2_ctrl_type type,
s32 min, s32 max, u32 step, s32 def,
u32 flags, const char **qmenu, void *priv)
{
struct v4l2_ctrl *ctrl;
unsigned sz_extra = 0;
if (hdl->error)
return NULL;
/* Sanity checks */
if (id == 0 || name == NULL || id >= V4L2_CID_PRIVATE_BASE ||
def < min || def > max || max < min ||
(type == V4L2_CTRL_TYPE_INTEGER && step == 0) ||
(type == V4L2_CTRL_TYPE_MENU && qmenu == NULL) ||
(type == V4L2_CTRL_TYPE_STRING && max == 0)) {
handler_set_err(hdl, -ERANGE);
return NULL;
}
if (type == V4L2_CTRL_TYPE_BUTTON)
flags |= V4L2_CTRL_FLAG_WRITE_ONLY;
else if (type == V4L2_CTRL_TYPE_CTRL_CLASS)
flags |= V4L2_CTRL_FLAG_READ_ONLY;
else if (type == V4L2_CTRL_TYPE_STRING)
sz_extra += 2 * (max + 1);
ctrl = kzalloc(sizeof(*ctrl) + sz_extra, GFP_KERNEL);
if (ctrl == NULL) {
handler_set_err(hdl, -ENOMEM);
return NULL;
}
INIT_LIST_HEAD(&ctrl->node);
ctrl->handler = hdl;
ctrl->ops = ops;
ctrl->id = id;
ctrl->name = name;
ctrl->type = type;
ctrl->flags = flags;
ctrl->minimum = min;
ctrl->maximum = max;
ctrl->step = step;
ctrl->qmenu = qmenu;
ctrl->priv = priv;
ctrl->cur.val = ctrl->val = ctrl->default_value = def;
if (ctrl->type == V4L2_CTRL_TYPE_STRING) {
ctrl->cur.string = (char *)&ctrl[1] + sz_extra - (max + 1);
ctrl->string = (char *)&ctrl[1] + sz_extra - 2 * (max + 1);
if (ctrl->minimum)
memset(ctrl->cur.string, ' ', ctrl->minimum);
}
if (handler_new_ref(hdl, ctrl)) {
kfree(ctrl);
return NULL;
}
mutex_lock(&hdl->lock);
list_add_tail(&ctrl->node, &hdl->ctrls);
mutex_unlock(&hdl->lock);
return ctrl;
}
struct v4l2_ctrl *v4l2_ctrl_new_custom(struct v4l2_ctrl_handler *hdl,
const struct v4l2_ctrl_config *cfg, void *priv)
{
bool is_menu;
struct v4l2_ctrl *ctrl;
const char *name = cfg->name;
const char **qmenu = cfg->qmenu;
enum v4l2_ctrl_type type = cfg->type;
u32 flags = cfg->flags;
s32 min = cfg->min;
s32 max = cfg->max;
u32 step = cfg->step;
s32 def = cfg->def;
if (name == NULL)
v4l2_ctrl_fill(cfg->id, &name, &type, &min, &max, &step,
&def, &flags);
is_menu = (cfg->type == V4L2_CTRL_TYPE_MENU);
if (is_menu)
WARN_ON(step);
else
WARN_ON(cfg->menu_skip_mask);
if (is_menu && qmenu == NULL)
qmenu = v4l2_ctrl_get_menu(cfg->id);
ctrl = v4l2_ctrl_new(hdl, cfg->ops, cfg->id, name,
type, min, max,
is_menu ? cfg->menu_skip_mask : step,
def, flags, qmenu, priv);
if (ctrl) {
ctrl->is_private = cfg->is_private;
ctrl->is_volatile = cfg->is_volatile;
}
return ctrl;
}
EXPORT_SYMBOL(v4l2_ctrl_new_custom);
/* Helper function for standard non-menu controls */
struct v4l2_ctrl *v4l2_ctrl_new_std(struct v4l2_ctrl_handler *hdl,
const struct v4l2_ctrl_ops *ops,
u32 id, s32 min, s32 max, u32 step, s32 def)
{
const char *name;
enum v4l2_ctrl_type type;
u32 flags;
v4l2_ctrl_fill(id, &name, &type, &min, &max, &step, &def, &flags);
if (type == V4L2_CTRL_TYPE_MENU) {
handler_set_err(hdl, -EINVAL);
return NULL;
}
return v4l2_ctrl_new(hdl, ops, id, name, type,
min, max, step, def, flags, NULL, NULL);
}
EXPORT_SYMBOL(v4l2_ctrl_new_std);
/* Helper function for standard menu controls */
struct v4l2_ctrl *v4l2_ctrl_new_std_menu(struct v4l2_ctrl_handler *hdl,
const struct v4l2_ctrl_ops *ops,
u32 id, s32 max, s32 mask, s32 def)
{
const char **qmenu = v4l2_ctrl_get_menu(id);
const char *name;
enum v4l2_ctrl_type type;
s32 min;
s32 step;
u32 flags;
v4l2_ctrl_fill(id, &name, &type, &min, &max, &step, &def, &flags);
if (type != V4L2_CTRL_TYPE_MENU) {
handler_set_err(hdl, -EINVAL);
return NULL;
}
return v4l2_ctrl_new(hdl, ops, id, name, type,
0, max, mask, def, flags, qmenu, NULL);
}
EXPORT_SYMBOL(v4l2_ctrl_new_std_menu);
/* Add a control from another handler to this handler */
struct v4l2_ctrl *v4l2_ctrl_add_ctrl(struct v4l2_ctrl_handler *hdl,
struct v4l2_ctrl *ctrl)
{
if (hdl == NULL || hdl->error)
return NULL;
if (ctrl == NULL) {
handler_set_err(hdl, -EINVAL);
return NULL;
}
if (ctrl->handler == hdl)
return ctrl;
return handler_new_ref(hdl, ctrl) ? NULL : ctrl;
}
EXPORT_SYMBOL(v4l2_ctrl_add_ctrl);
/* Add the controls from another handler to our own. */
int v4l2_ctrl_add_handler(struct v4l2_ctrl_handler *hdl,
struct v4l2_ctrl_handler *add)
{
struct v4l2_ctrl *ctrl;
int ret = 0;
/* Do nothing if either handler is NULL or if they are the same */
if (!hdl || !add || hdl == add)
return 0;
if (hdl->error)
return hdl->error;
mutex_lock(&add->lock);
list_for_each_entry(ctrl, &add->ctrls, node) {
/* Skip handler-private controls. */
if (ctrl->is_private)
continue;
ret = handler_new_ref(hdl, ctrl);
if (ret)
break;
}
mutex_unlock(&add->lock);
return ret;
}
EXPORT_SYMBOL(v4l2_ctrl_add_handler);
/* Cluster controls */
void v4l2_ctrl_cluster(unsigned ncontrols, struct v4l2_ctrl **controls)
{
int i;
/* The first control is the master control and it must not be NULL */
BUG_ON(controls[0] == NULL);
for (i = 0; i < ncontrols; i++) {
if (controls[i]) {
controls[i]->cluster = controls;
controls[i]->ncontrols = ncontrols;
}
}
}
EXPORT_SYMBOL(v4l2_ctrl_cluster);
/* Activate/deactivate a control. */
void v4l2_ctrl_activate(struct v4l2_ctrl *ctrl, bool active)
{
if (ctrl == NULL)
return;
if (!active)
/* set V4L2_CTRL_FLAG_INACTIVE */
set_bit(4, &ctrl->flags);
else
/* clear V4L2_CTRL_FLAG_INACTIVE */
clear_bit(4, &ctrl->flags);
}
EXPORT_SYMBOL(v4l2_ctrl_activate);
/* Grab/ungrab a control.
Typically used when streaming starts and you want to grab controls,
preventing the user from changing them.
Just call this and the framework will block any attempts to change
these controls. */
void v4l2_ctrl_grab(struct v4l2_ctrl *ctrl, bool grabbed)
{
if (ctrl == NULL)
return;
if (grabbed)
/* set V4L2_CTRL_FLAG_GRABBED */
set_bit(1, &ctrl->flags);
else
/* clear V4L2_CTRL_FLAG_GRABBED */
clear_bit(1, &ctrl->flags);
}
EXPORT_SYMBOL(v4l2_ctrl_grab);
/* Log the control name and value */
static void log_ctrl(const struct v4l2_ctrl *ctrl,
const char *prefix, const char *colon)
{
int fl_inact = ctrl->flags & V4L2_CTRL_FLAG_INACTIVE;
int fl_grabbed = ctrl->flags & V4L2_CTRL_FLAG_GRABBED;
if (ctrl->flags & (V4L2_CTRL_FLAG_DISABLED | V4L2_CTRL_FLAG_WRITE_ONLY))
return;
if (ctrl->type == V4L2_CTRL_TYPE_CTRL_CLASS)
return;
printk(KERN_INFO "%s%s%s: ", prefix, colon, ctrl->name);
switch (ctrl->type) {
case V4L2_CTRL_TYPE_INTEGER:
printk(KERN_CONT "%d", ctrl->cur.val);
break;
case V4L2_CTRL_TYPE_BOOLEAN:
printk(KERN_CONT "%s", ctrl->cur.val ? "true" : "false");
break;
case V4L2_CTRL_TYPE_MENU:
printk(KERN_CONT "%s", ctrl->qmenu[ctrl->cur.val]);
break;
case V4L2_CTRL_TYPE_INTEGER64:
printk(KERN_CONT "%lld", ctrl->cur.val64);
break;
case V4L2_CTRL_TYPE_STRING:
printk(KERN_CONT "%s", ctrl->cur.string);
break;
default:
printk(KERN_CONT "unknown type %d", ctrl->type);
break;
}
if (fl_inact && fl_grabbed)
printk(KERN_CONT " (inactive, grabbed)\n");
else if (fl_inact)
printk(KERN_CONT " (inactive)\n");
else if (fl_grabbed)
printk(KERN_CONT " (grabbed)\n");
else
printk(KERN_CONT "\n");
}
/* Log all controls owned by the handler */
void v4l2_ctrl_handler_log_status(struct v4l2_ctrl_handler *hdl,
const char *prefix)
{
struct v4l2_ctrl *ctrl;
const char *colon = "";
int len;
if (hdl == NULL)
return;
if (prefix == NULL)
prefix = "";
len = strlen(prefix);
if (len && prefix[len - 1] != ' ')
colon = ": ";
mutex_lock(&hdl->lock);
list_for_each_entry(ctrl, &hdl->ctrls, node)
if (!(ctrl->flags & V4L2_CTRL_FLAG_DISABLED))
log_ctrl(ctrl, prefix, colon);
mutex_unlock(&hdl->lock);
}
EXPORT_SYMBOL(v4l2_ctrl_handler_log_status);
/* Call s_ctrl for all controls owned by the handler */
int v4l2_ctrl_handler_setup(struct v4l2_ctrl_handler *hdl)
{
struct v4l2_ctrl *ctrl;
int ret = 0;
if (hdl == NULL)
return 0;
mutex_lock(&hdl->lock);
list_for_each_entry(ctrl, &hdl->ctrls, node)
ctrl->done = false;
list_for_each_entry(ctrl, &hdl->ctrls, node) {
struct v4l2_ctrl *master = ctrl->cluster[0];
int i;
/* Skip if this control was already handled by a cluster. */
if (ctrl->done)
continue;
for (i = 0; i < master->ncontrols; i++)
cur_to_new(master->cluster[i]);
/* Skip button controls and read-only controls. */
if (ctrl->type == V4L2_CTRL_TYPE_BUTTON ||
(ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY))
continue;
ret = master->ops->s_ctrl(master);
if (ret)
break;
for (i = 0; i < master->ncontrols; i++)
if (master->cluster[i])
master->cluster[i]->done = true;
}
mutex_unlock(&hdl->lock);
return ret;
}
EXPORT_SYMBOL(v4l2_ctrl_handler_setup);
/* Implement VIDIOC_QUERYCTRL */
int v4l2_queryctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_queryctrl *qc)
{
u32 id = qc->id & V4L2_CTRL_ID_MASK;
struct v4l2_ctrl_ref *ref;
struct v4l2_ctrl *ctrl;
if (hdl == NULL)
return -EINVAL;
mutex_lock(&hdl->lock);
/* Try to find it */
ref = find_ref(hdl, id);
if ((qc->id & V4L2_CTRL_FLAG_NEXT_CTRL) && !list_empty(&hdl->ctrl_refs)) {
/* Find the next control with ID > qc->id */
/* Did we reach the end of the control list? */
if (id >= node2id(hdl->ctrl_refs.prev)) {
ref = NULL; /* Yes, so there is no next control */
} else if (ref) {
/* We found a control with the given ID, so just get
the next one in the list. */
ref = list_entry(ref->node.next, typeof(*ref), node);
} else {
/* No control with the given ID exists, so start
searching for the next largest ID. We know there
is one, otherwise the first 'if' above would have
been true. */
list_for_each_entry(ref, &hdl->ctrl_refs, node)
if (id < ref->ctrl->id)
break;
}
}
mutex_unlock(&hdl->lock);
if (!ref)
return -EINVAL;
ctrl = ref->ctrl;
memset(qc, 0, sizeof(*qc));
qc->id = ctrl->id;
strlcpy(qc->name, ctrl->name, sizeof(qc->name));
qc->minimum = ctrl->minimum;
qc->maximum = ctrl->maximum;
qc->default_value = ctrl->default_value;
if (qc->type == V4L2_CTRL_TYPE_MENU)
qc->step = 1;
else
qc->step = ctrl->step;
qc->flags = ctrl->flags;
qc->type = ctrl->type;
return 0;
}
EXPORT_SYMBOL(v4l2_queryctrl);
int v4l2_subdev_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
{
return v4l2_queryctrl(sd->ctrl_handler, qc);
}
EXPORT_SYMBOL(v4l2_subdev_queryctrl);
/* Implement VIDIOC_QUERYMENU */
int v4l2_querymenu(struct v4l2_ctrl_handler *hdl, struct v4l2_querymenu *qm)
{
struct v4l2_ctrl *ctrl;
u32 i = qm->index;
ctrl = v4l2_ctrl_find(hdl, qm->id);
if (!ctrl)
return -EINVAL;
qm->reserved = 0;
/* Sanity checks */
if (ctrl->qmenu == NULL ||
i < ctrl->minimum || i > ctrl->maximum)
return -EINVAL;
/* Use mask to see if this menu item should be skipped */
if (ctrl->menu_skip_mask & (1 << i))
return -EINVAL;
/* Empty menu items should also be skipped */
if (ctrl->qmenu[i] == NULL || ctrl->qmenu[i][0] == '\0')
return -EINVAL;
strlcpy(qm->name, ctrl->qmenu[i], sizeof(qm->name));
return 0;
}
EXPORT_SYMBOL(v4l2_querymenu);
int v4l2_subdev_querymenu(struct v4l2_subdev *sd, struct v4l2_querymenu *qm)
{
return v4l2_querymenu(sd->ctrl_handler, qm);
}
EXPORT_SYMBOL(v4l2_subdev_querymenu);
/* Some general notes on the atomic requirements of VIDIOC_G/TRY/S_EXT_CTRLS:
It is not a fully atomic operation, just best-effort only. After all, if
multiple controls have to be set through multiple i2c writes (for example)
then some initial writes may succeed while others fail. Thus leaving the
system in an inconsistent state. The question is how much effort you are
willing to spend on trying to make something atomic that really isn't.
From the point of view of an application the main requirement is that
when you call VIDIOC_S_EXT_CTRLS and some values are invalid then an
error should be returned without actually affecting any controls.
If all the values are correct, then it is acceptable to just give up
in case of low-level errors.
It is important though that the application can tell when only a partial
configuration was done. The way we do that is through the error_idx field
of struct v4l2_ext_controls: if that is equal to the count field then no
controls were affected. Otherwise all controls before that index were
successful in performing their 'get' or 'set' operation, the control at
the given index failed, and you don't know what happened with the controls
after the failed one. Since if they were part of a control cluster they
could have been successfully processed (if a cluster member was encountered
at index < error_idx), they could have failed (if a cluster member was at
error_idx), or they may not have been processed yet (if the first cluster
member appeared after error_idx).
It is all fairly theoretical, though. In practice all you can do is to
bail out. If error_idx == count, then it is an application bug. If
error_idx < count then it is only an application bug if the error code was
EBUSY. That usually means that something started streaming just when you
tried to set the controls. In all other cases it is a driver/hardware
problem and all you can do is to retry or bail out.
Note that these rules do not apply to VIDIOC_TRY_EXT_CTRLS: since that
never modifies controls the error_idx is just set to whatever control
has an invalid value.
*/
/* Prepare for the extended g/s/try functions.
Find the controls in the control array and do some basic checks. */
static int prepare_ext_ctrls(struct v4l2_ctrl_handler *hdl,
struct v4l2_ext_controls *cs,
struct ctrl_helper *helpers,
bool try)
{
u32 i;
for (i = 0; i < cs->count; i++) {
struct v4l2_ext_control *c = &cs->controls[i];
struct v4l2_ctrl *ctrl;
u32 id = c->id & V4L2_CTRL_ID_MASK;
if (try)
cs->error_idx = i;
if (cs->ctrl_class && V4L2_CTRL_ID2CLASS(id) != cs->ctrl_class)
return -EINVAL;
/* Old-style private controls are not allowed for
extended controls */
if (id >= V4L2_CID_PRIVATE_BASE)
return -EINVAL;
ctrl = v4l2_ctrl_find(hdl, id);
if (ctrl == NULL)
return -EINVAL;
if (ctrl->flags & V4L2_CTRL_FLAG_DISABLED)
return -EINVAL;
helpers[i].ctrl = ctrl;
helpers[i].handled = false;
}
return 0;
}
typedef int (*cluster_func)(struct v4l2_ext_control *c,
struct v4l2_ctrl *ctrl);
/* Walk over all controls in v4l2_ext_controls belonging to the same cluster
and call the provided function. */
static int cluster_walk(unsigned from,
struct v4l2_ext_controls *cs,
struct ctrl_helper *helpers,
cluster_func f)
{
struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
int ret = 0;
int i;
/* Find any controls from the same cluster and call the function */
for (i = from; !ret && i < cs->count; i++) {
struct v4l2_ctrl *ctrl = helpers[i].ctrl;
if (!helpers[i].handled && ctrl->cluster == cluster)
ret = f(&cs->controls[i], ctrl);
}
return ret;
}
static void cluster_done(unsigned from,
struct v4l2_ext_controls *cs,
struct ctrl_helper *helpers)
{
struct v4l2_ctrl **cluster = helpers[from].ctrl->cluster;
int i;
/* Find any controls from the same cluster and mark them as handled */
for (i = from; i < cs->count; i++)
if (helpers[i].ctrl->cluster == cluster)
helpers[i].handled = true;
}
/* Handles the corner case where cs->count == 0. It checks whether the
specified control class exists. If that class ID is 0, then it checks
whether there are any controls at all. */
static int class_check(struct v4l2_ctrl_handler *hdl, u32 ctrl_class)
{
if (ctrl_class == 0)
return list_empty(&hdl->ctrl_refs) ? -EINVAL : 0;
return find_ref_lock(hdl, ctrl_class | 1) ? 0 : -EINVAL;
}
/* Get extended controls. Allocates the helpers array if needed. */
int v4l2_g_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
{
struct ctrl_helper helper[4];
struct ctrl_helper *helpers = helper;
int ret;
int i;
cs->error_idx = cs->count;
cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
if (hdl == NULL)
return -EINVAL;
if (cs->count == 0)
return class_check(hdl, cs->ctrl_class);
if (cs->count > ARRAY_SIZE(helper)) {
helpers = kmalloc(sizeof(helper[0]) * cs->count, GFP_KERNEL);
if (helpers == NULL)
return -ENOMEM;
}
ret = prepare_ext_ctrls(hdl, cs, helpers, false);
for (i = 0; !ret && i < cs->count; i++)
if (helpers[i].ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
ret = -EACCES;
for (i = 0; !ret && i < cs->count; i++) {
struct v4l2_ctrl *ctrl = helpers[i].ctrl;
struct v4l2_ctrl *master = ctrl->cluster[0];
if (helpers[i].handled)
continue;
cs->error_idx = i;
v4l2_ctrl_lock(master);
/* g_volatile_ctrl will update the current control values */
if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
ret = master->ops->g_volatile_ctrl(master);
/* If OK, then copy the current control values to the caller */
if (!ret)
ret = cluster_walk(i, cs, helpers, cur_to_user);
v4l2_ctrl_unlock(master);
cluster_done(i, cs, helpers);
}
if (cs->count > ARRAY_SIZE(helper))
kfree(helpers);
return ret;
}
EXPORT_SYMBOL(v4l2_g_ext_ctrls);
int v4l2_subdev_g_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
{
return v4l2_g_ext_ctrls(sd->ctrl_handler, cs);
}
EXPORT_SYMBOL(v4l2_subdev_g_ext_ctrls);
/* Helper function to get a single control */
static int get_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
{
struct v4l2_ctrl *master = ctrl->cluster[0];
int ret = 0;
if (ctrl->flags & V4L2_CTRL_FLAG_WRITE_ONLY)
return -EACCES;
v4l2_ctrl_lock(master);
/* g_volatile_ctrl will update the current control values */
if (ctrl->is_volatile && master->ops->g_volatile_ctrl)
ret = master->ops->g_volatile_ctrl(master);
*val = ctrl->cur.val;
v4l2_ctrl_unlock(master);
return ret;
}
int v4l2_g_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control)
{
struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
if (ctrl == NULL || !type_is_int(ctrl))
return -EINVAL;
return get_ctrl(ctrl, &control->value);
}
EXPORT_SYMBOL(v4l2_g_ctrl);
int v4l2_subdev_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control)
{
return v4l2_g_ctrl(sd->ctrl_handler, control);
}
EXPORT_SYMBOL(v4l2_subdev_g_ctrl);
s32 v4l2_ctrl_g_ctrl(struct v4l2_ctrl *ctrl)
{
s32 val = 0;
/* It's a driver bug if this happens. */
WARN_ON(!type_is_int(ctrl));
get_ctrl(ctrl, &val);
return val;
}
EXPORT_SYMBOL(v4l2_ctrl_g_ctrl);
/* Core function that calls try/s_ctrl and ensures that the new value is
copied to the current value on a set.
Must be called with ctrl->handler->lock held. */
static int try_or_set_control_cluster(struct v4l2_ctrl *master, bool set)
{
bool try = !set;
int ret = 0;
int i;
/* Go through the cluster and either validate the new value or
(if no new value was set), copy the current value to the new
value, ensuring a consistent view for the control ops when
called. */
for (i = 0; !ret && i < master->ncontrols; i++) {
struct v4l2_ctrl *ctrl = master->cluster[i];
if (ctrl == NULL)
continue;
if (ctrl->has_new) {
/* Double check this: it may have changed since the
last check in try_or_set_ext_ctrls(). */
if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
return -EBUSY;
/* Validate if required */
if (!set)
ret = validate_new(ctrl);
continue;
}
/* No new value was set, so copy the current and force
a call to try_ctrl later, since the values for the cluster
may now have changed and the end result might be invalid. */
try = true;
cur_to_new(ctrl);
}
/* For larger clusters you have to call try_ctrl again to
verify that the controls are still valid after the
'cur_to_new' above. */
if (!ret && master->ops->try_ctrl && try)
ret = master->ops->try_ctrl(master);
/* Don't set if there is no change */
if (!ret && set && cluster_changed(master)) {
ret = master->ops->s_ctrl(master);
/* If OK, then make the new values permanent. */
if (!ret)
for (i = 0; i < master->ncontrols; i++)
new_to_cur(master->cluster[i]);
}
return ret;
}
/* Try or set controls. */
static int try_or_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
struct v4l2_ext_controls *cs,
struct ctrl_helper *helpers,
bool set)
{
unsigned i, j;
int ret = 0;
cs->error_idx = cs->count;
for (i = 0; i < cs->count; i++) {
struct v4l2_ctrl *ctrl = helpers[i].ctrl;
if (!set)
cs->error_idx = i;
if (ctrl->flags & V4L2_CTRL_FLAG_READ_ONLY)
return -EACCES;
/* This test is also done in try_set_control_cluster() which
is called in atomic context, so that has the final say,
but it makes sense to do an up-front check as well. Once
an error occurs in try_set_control_cluster() some other
controls may have been set already and we want to do a
best-effort to avoid that. */
if (set && (ctrl->flags & V4L2_CTRL_FLAG_GRABBED))
return -EBUSY;
}
for (i = 0; !ret && i < cs->count; i++) {
struct v4l2_ctrl *ctrl = helpers[i].ctrl;
struct v4l2_ctrl *master = ctrl->cluster[0];
cs->error_idx = i;
if (helpers[i].handled)
continue;
v4l2_ctrl_lock(ctrl);
/* Reset the 'has_new' flags of the cluster */
for (j = 0; j < master->ncontrols; j++)
if (master->cluster[j])
master->cluster[j]->has_new = 0;
/* Copy the new caller-supplied control values.
user_to_new() sets 'has_new' to 1. */
ret = cluster_walk(i, cs, helpers, user_to_new);
if (!ret)
ret = try_or_set_control_cluster(master, set);
/* Copy the new values back to userspace. */
if (!ret)
ret = cluster_walk(i, cs, helpers, new_to_user);
v4l2_ctrl_unlock(ctrl);
cluster_done(i, cs, helpers);
}
return ret;
}
/* Try or try-and-set controls */
static int try_set_ext_ctrls(struct v4l2_ctrl_handler *hdl,
struct v4l2_ext_controls *cs,
bool set)
{
struct ctrl_helper helper[4];
struct ctrl_helper *helpers = helper;
int ret;
int i;
cs->error_idx = cs->count;
cs->ctrl_class = V4L2_CTRL_ID2CLASS(cs->ctrl_class);
if (hdl == NULL)
return -EINVAL;
if (cs->count == 0)
return class_check(hdl, cs->ctrl_class);
if (cs->count > ARRAY_SIZE(helper)) {
helpers = kmalloc(sizeof(helper[0]) * cs->count, GFP_KERNEL);
if (!helpers)
return -ENOMEM;
}
ret = prepare_ext_ctrls(hdl, cs, helpers, !set);
if (ret)
goto free;
/* First 'try' all controls and abort on error */
ret = try_or_set_ext_ctrls(hdl, cs, helpers, false);
/* If this is a 'set' operation and the initial 'try' failed,
then set error_idx to count to tell the application that no
controls changed value yet. */
if (set)
cs->error_idx = cs->count;
if (!ret && set) {
/* Reset 'handled' state */
for (i = 0; i < cs->count; i++)
helpers[i].handled = false;
ret = try_or_set_ext_ctrls(hdl, cs, helpers, true);
}
free:
if (cs->count > ARRAY_SIZE(helper))
kfree(helpers);
return ret;
}
int v4l2_try_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
{
return try_set_ext_ctrls(hdl, cs, false);
}
EXPORT_SYMBOL(v4l2_try_ext_ctrls);
int v4l2_s_ext_ctrls(struct v4l2_ctrl_handler *hdl, struct v4l2_ext_controls *cs)
{
return try_set_ext_ctrls(hdl, cs, true);
}
EXPORT_SYMBOL(v4l2_s_ext_ctrls);
int v4l2_subdev_try_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
{
return try_set_ext_ctrls(sd->ctrl_handler, cs, false);
}
EXPORT_SYMBOL(v4l2_subdev_try_ext_ctrls);
int v4l2_subdev_s_ext_ctrls(struct v4l2_subdev *sd, struct v4l2_ext_controls *cs)
{
return try_set_ext_ctrls(sd->ctrl_handler, cs, true);
}
EXPORT_SYMBOL(v4l2_subdev_s_ext_ctrls);
/* Helper function for VIDIOC_S_CTRL compatibility */
static int set_ctrl(struct v4l2_ctrl *ctrl, s32 *val)
{
struct v4l2_ctrl *master = ctrl->cluster[0];
int ret;
int i;
v4l2_ctrl_lock(ctrl);
/* Reset the 'has_new' flags of the cluster */
for (i = 0; i < master->ncontrols; i++)
if (master->cluster[i])
master->cluster[i]->has_new = 0;
ctrl->val = *val;
ctrl->has_new = 1;
ret = try_or_set_control_cluster(master, false);
if (!ret)
ret = try_or_set_control_cluster(master, true);
*val = ctrl->cur.val;
v4l2_ctrl_unlock(ctrl);
return ret;
}
int v4l2_s_ctrl(struct v4l2_ctrl_handler *hdl, struct v4l2_control *control)
{
struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, control->id);
if (ctrl == NULL || !type_is_int(ctrl))
return -EINVAL;
return set_ctrl(ctrl, &control->value);
}
EXPORT_SYMBOL(v4l2_s_ctrl);
int v4l2_subdev_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *control)
{
return v4l2_s_ctrl(sd->ctrl_handler, control);
}
EXPORT_SYMBOL(v4l2_subdev_s_ctrl);
int v4l2_ctrl_s_ctrl(struct v4l2_ctrl *ctrl, s32 val)
{
/* It's a driver bug if this happens. */
WARN_ON(!type_is_int(ctrl));
return set_ctrl(ctrl, &val);
}
EXPORT_SYMBOL(v4l2_ctrl_s_ctrl);