android_kernel_xiaomi_sm8350/tools/perf/builtin-stat.c

555 lines
14 KiB
C
Raw Normal View History

/*
* builtin-stat.c
*
* Builtin stat command: Give a precise performance counters summary
* overview about any workload, CPU or specific PID.
*
* Sample output:
$ perf stat ~/hackbench 10
Time: 0.104
Performance counter stats for '/home/mingo/hackbench':
1255.538611 task clock ticks # 10.143 CPU utilization factor
54011 context switches # 0.043 M/sec
385 CPU migrations # 0.000 M/sec
17755 pagefaults # 0.014 M/sec
3808323185 CPU cycles # 3033.219 M/sec
1575111190 instructions # 1254.530 M/sec
17367895 cache references # 13.833 M/sec
7674421 cache misses # 6.112 M/sec
Wall-clock time elapsed: 123.786620 msecs
*
* Copyright (C) 2008, Red Hat Inc, Ingo Molnar <mingo@redhat.com>
*
* Improvements and fixes by:
*
* Arjan van de Ven <arjan@linux.intel.com>
* Yanmin Zhang <yanmin.zhang@intel.com>
* Wu Fengguang <fengguang.wu@intel.com>
* Mike Galbraith <efault@gmx.de>
* Paul Mackerras <paulus@samba.org>
* Jaswinder Singh Rajput <jaswinder@kernel.org>
*
* Released under the GPL v2. (and only v2, not any later version)
*/
#include "perf.h"
#include "builtin.h"
#include "util/util.h"
#include "util/parse-options.h"
#include "util/parse-events.h"
#include <sys/prctl.h>
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
#include <math.h>
static struct perf_counter_attr default_attrs[] = {
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_TASK_CLOCK },
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CONTEXT_SWITCHES},
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_CPU_MIGRATIONS },
{ .type = PERF_TYPE_SOFTWARE, .config = PERF_COUNT_SW_PAGE_FAULTS },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CPU_CYCLES },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_INSTRUCTIONS },
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_REFERENCES},
{ .type = PERF_TYPE_HARDWARE, .config = PERF_COUNT_HW_CACHE_MISSES },
};
#define MAX_RUN 100
static int system_wide = 0;
static int verbose = 0;
static int nr_cpus = 0;
static int run_idx = 0;
static int run_count = 1;
static int inherit = 1;
static int scale = 1;
static int target_pid = -1;
static int null_run = 0;
static int fd[MAX_NR_CPUS][MAX_COUNTERS];
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
static u64 runtime_nsecs[MAX_RUN];
static u64 walltime_nsecs[MAX_RUN];
static u64 runtime_cycles[MAX_RUN];
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
static u64 event_res[MAX_RUN][MAX_COUNTERS][3];
static u64 event_scaled[MAX_RUN][MAX_COUNTERS];
static u64 event_res_avg[MAX_COUNTERS][3];
static u64 event_res_noise[MAX_COUNTERS][3];
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
static u64 event_scaled_avg[MAX_COUNTERS];
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
static u64 runtime_nsecs_avg;
static u64 runtime_nsecs_noise;
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
static u64 walltime_nsecs_avg;
static u64 walltime_nsecs_noise;
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
static u64 runtime_cycles_avg;
static u64 runtime_cycles_noise;
perf_counter tools: Also display time-normalized stat results Add new column that normalizes counter results by 'nanoseconds spent running' unit. Before: Performance counter stats for '/home/mingo/hackbench': 10469.403605 task clock ticks (msecs) 75502 context switches (events) 9501 CPU migrations (events) 36158 pagefaults (events) 31975676185 CPU cycles (events) 26257738659 instructions (events) 108740581 cache references (events) 54606088 cache misses (events) Wall-clock time elapsed: 810.514504 msecs After: Performance counter stats for '/home/mingo/hackbench': 10469.403605 task clock ticks (msecs) 75502 context switches # 0.007 M/sec 9501 CPU migrations # 0.001 M/sec 36158 pagefaults # 0.003 M/sec 31975676185 CPU cycles # 3054.202 M/sec 26257738659 instructions # 2508.045 M/sec 108740581 cache references # 10.387 M/sec 54606088 cache misses # 5.216 M/sec Wall-clock time elapsed: 810.514504 msecs The advantage of that column is that it is characteristic of the execution workflow, regardless of runtime. Hence 'hackbench 10' will look similar to 'hackbench 15' - while the absolute counter values are very different. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 03:10:54 -04:00
#define ERR_PERF_OPEN \
"Error: counter %d, sys_perf_counter_open() syscall returned with %d (%s)\n"
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 07:13:21 -04:00
static void create_perf_stat_counter(int counter, int pid)
{
struct perf_counter_attr *attr = attrs + counter;
if (scale)
attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED |
PERF_FORMAT_TOTAL_TIME_RUNNING;
if (system_wide) {
int cpu;
for (cpu = 0; cpu < nr_cpus; cpu++) {
fd[cpu][counter] = sys_perf_counter_open(attr, -1, cpu, -1, 0);
if (fd[cpu][counter] < 0 && verbose)
fprintf(stderr, ERR_PERF_OPEN, counter,
fd[cpu][counter], strerror(errno));
}
} else {
attr->inherit = inherit;
attr->disabled = 1;
attr->enable_on_exec = 1;
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 07:13:21 -04:00
fd[0][counter] = sys_perf_counter_open(attr, pid, -1, -1, 0);
if (fd[0][counter] < 0 && verbose)
fprintf(stderr, ERR_PERF_OPEN, counter,
fd[0][counter], strerror(errno));
}
}
/*
* Does the counter have nsecs as a unit?
*/
static inline int nsec_counter(int counter)
{
if (attrs[counter].type != PERF_TYPE_SOFTWARE)
return 0;
if (attrs[counter].config == PERF_COUNT_SW_CPU_CLOCK)
return 1;
if (attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
return 1;
return 0;
}
/*
* Read out the results of a single counter:
*/
static void read_counter(int counter)
{
u64 *count, single_count[3];
ssize_t res;
int cpu, nv;
int scaled;
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
count = event_res[run_idx][counter];
count[0] = count[1] = count[2] = 0;
nv = scale ? 3 : 1;
for (cpu = 0; cpu < nr_cpus; cpu++) {
if (fd[cpu][counter] < 0)
continue;
res = read(fd[cpu][counter], single_count, nv * sizeof(u64));
assert(res == nv * sizeof(u64));
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
close(fd[cpu][counter]);
fd[cpu][counter] = -1;
count[0] += single_count[0];
if (scale) {
count[1] += single_count[1];
count[2] += single_count[2];
}
}
scaled = 0;
if (scale) {
if (count[2] == 0) {
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
event_scaled[run_idx][counter] = -1;
count[0] = 0;
return;
}
if (count[2] < count[1]) {
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
event_scaled[run_idx][counter] = 1;
count[0] = (unsigned long long)
((double)count[0] * count[1] / count[2] + 0.5);
}
}
perf_counter tools: Also display time-normalized stat results Add new column that normalizes counter results by 'nanoseconds spent running' unit. Before: Performance counter stats for '/home/mingo/hackbench': 10469.403605 task clock ticks (msecs) 75502 context switches (events) 9501 CPU migrations (events) 36158 pagefaults (events) 31975676185 CPU cycles (events) 26257738659 instructions (events) 108740581 cache references (events) 54606088 cache misses (events) Wall-clock time elapsed: 810.514504 msecs After: Performance counter stats for '/home/mingo/hackbench': 10469.403605 task clock ticks (msecs) 75502 context switches # 0.007 M/sec 9501 CPU migrations # 0.001 M/sec 36158 pagefaults # 0.003 M/sec 31975676185 CPU cycles # 3054.202 M/sec 26257738659 instructions # 2508.045 M/sec 108740581 cache references # 10.387 M/sec 54606088 cache misses # 5.216 M/sec Wall-clock time elapsed: 810.514504 msecs The advantage of that column is that it is characteristic of the execution workflow, regardless of runtime. Hence 'hackbench 10' will look similar to 'hackbench 15' - while the absolute counter values are very different. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Kacur <jkacur@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-29 03:10:54 -04:00
/*
* Save the full runtime - to allow normalization during printout:
*/
if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK)
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
runtime_nsecs[run_idx] = count[0];
if (attrs[counter].type == PERF_TYPE_HARDWARE &&
attrs[counter].config == PERF_COUNT_HW_CPU_CYCLES)
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
runtime_cycles[run_idx] = count[0];
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
static int run_perf_stat(int argc, const char **argv)
{
unsigned long long t0, t1;
int status = 0;
int counter;
int pid;
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 07:13:21 -04:00
int child_ready_pipe[2], go_pipe[2];
char buf;
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
if (!system_wide)
nr_cpus = 1;
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 07:13:21 -04:00
if (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0) {
perror("failed to create pipes");
exit(1);
}
if ((pid = fork()) < 0)
perror("failed to fork");
if (!pid) {
close(child_ready_pipe[0]);
close(go_pipe[1]);
fcntl(go_pipe[0], F_SETFD, FD_CLOEXEC);
/*
* Do a dummy execvp to get the PLT entry resolved,
* so we avoid the resolver overhead on the real
* execvp call.
*/
execvp("", (char **)argv);
/*
* Tell the parent we're ready to go
*/
close(child_ready_pipe[1]);
/*
* Wait until the parent tells us to go.
*/
read(go_pipe[0], &buf, 1);
execvp(argv[0], (char **)argv);
perror(argv[0]);
exit(-1);
}
/*
* Wait for the child to be ready to exec.
*/
close(child_ready_pipe[1]);
close(go_pipe[0]);
read(child_ready_pipe[0], &buf, 1);
close(child_ready_pipe[0]);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
for (counter = 0; counter < nr_counters; counter++)
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 07:13:21 -04:00
create_perf_stat_counter(counter, pid);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
/*
* Enable counters and exec the command:
*/
t0 = rdclock();
perf_counter tools: Reduce perf stat measurement overhead/skew Vince Weaver reported a 'perf stat' measurement overhead in the count of retired instructions, which can amount to a +6000 instructions inflated count in the reported count. At present, perf stat creates its counters on the perf process. Thus the counters count the fork and various other activity in both the parent and child, such as the resolver overhead for resolving PLT entries for any libc functions that haven't been called before, such as execvp. This reduces the overhead by creating the counters on the child process after the fork, using a couple of pipes to synchronize so that the child process waits until the parent has created the counters before doing the exec. To eliminate the PLT resolution overhead on calling execvp, this does a dummy execvp first which will always fail. With this, the overhead of executing a program goes down from over 4800 instructions to about 90 instructions on powerpc (32-bit). This was measured with a statically-linked program written in assembler which only does the 3 instructions needed to call _exit(0). Before: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 4858 instructions 0.001274523 seconds time elapsed After: $ perf stat -e 0:1:u ./three Performance counter stats for './three': 92 instructions 0.000468153 seconds time elapsed Reported-by: Vince Weaver <vince@deater.net> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19016.41425.814043.870352@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-29 07:13:21 -04:00
close(go_pipe[1]);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
wait(&status);
t1 = rdclock();
walltime_nsecs[run_idx] = t1 - t0;
for (counter = 0; counter < nr_counters; counter++)
read_counter(counter);
return WEXITSTATUS(status);
}
static void print_noise(u64 *count, u64 *noise)
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
{
if (run_count > 1)
fprintf(stderr, " ( +- %7.3f%% )",
(double)noise[0]/(count[0]+1)*100.0);
}
static void nsec_printout(int counter, u64 *count, u64 *noise)
{
double msecs = (double)count[0] / 1000000;
fprintf(stderr, " %14.6f %-24s", msecs, event_name(counter));
if (attrs[counter].type == PERF_TYPE_SOFTWARE &&
attrs[counter].config == PERF_COUNT_SW_TASK_CLOCK) {
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
if (walltime_nsecs_avg)
fprintf(stderr, " # %10.3f CPUs ",
(double)count[0] / (double)walltime_nsecs_avg);
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
print_noise(count, noise);
}
static void abs_printout(int counter, u64 *count, u64 *noise)
{
fprintf(stderr, " %14Ld %-24s", count[0], event_name(counter));
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
if (runtime_cycles_avg &&
attrs[counter].type == PERF_TYPE_HARDWARE &&
attrs[counter].config == PERF_COUNT_HW_INSTRUCTIONS) {
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
fprintf(stderr, " # %10.3f IPC ",
(double)count[0] / (double)runtime_cycles_avg);
} else {
if (runtime_nsecs_avg) {
fprintf(stderr, " # %10.3f M/sec",
(double)count[0]/runtime_nsecs_avg*1000.0);
}
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
print_noise(count, noise);
}
/*
* Print out the results of a single counter:
*/
static void print_counter(int counter)
{
u64 *count, *noise;
int scaled;
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
count = event_res_avg[counter];
noise = event_res_noise[counter];
scaled = event_scaled_avg[counter];
if (scaled == -1) {
fprintf(stderr, " %14s %-24s\n",
"<not counted>", event_name(counter));
return;
}
if (nsec_counter(counter))
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
nsec_printout(counter, count, noise);
else
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
abs_printout(counter, count, noise);
if (scaled)
fprintf(stderr, " (scaled from %.2f%%)",
(double) count[2] / count[1] * 100);
fprintf(stderr, "\n");
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
/*
perf stat: Enable raw data to be printed If -vv (very verbose) is specified, print out raw data in the following format: $ perf stat -vv -r 3 ./loop_1b_instructions [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] [ perf stat: executing run #3 ... ] debug: runtime[0]: 235871872 debug: walltime[0]: 236646752 debug: runtime_cycles[0]: 755150182 debug: counter/0[0]: 235871872 debug: counter/1[0]: 235871872 debug: counter/2[0]: 235871872 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235870662 debug: counter/2[1]: 235870662 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235870437 debug: counter/2[2]: 235870437 debug: scaled[2]: 0 debug: counter/0[3]: 140 debug: counter/1[3]: 235870298 debug: counter/2[3]: 235870298 debug: scaled[3]: 0 debug: counter/0[4]: 755150182 debug: counter/1[4]: 235870145 debug: counter/2[4]: 235870145 debug: scaled[4]: 0 debug: counter/0[5]: 1001411258 debug: counter/1[5]: 235868838 debug: counter/2[5]: 235868838 debug: scaled[5]: 0 debug: counter/0[6]: 27897 debug: counter/1[6]: 235868560 debug: counter/2[6]: 235868560 debug: scaled[6]: 0 debug: counter/0[7]: 2910 debug: counter/1[7]: 235868151 debug: counter/2[7]: 235868151 debug: scaled[7]: 0 debug: runtime[0]: 235980257 debug: walltime[0]: 236770942 debug: runtime_cycles[0]: 755114546 debug: counter/0[0]: 235980257 debug: counter/1[0]: 235980257 debug: counter/2[0]: 235980257 debug: scaled[0]: 0 debug: counter/0[1]: 3 debug: counter/1[1]: 235980049 debug: counter/2[1]: 235980049 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235979907 debug: counter/2[2]: 235979907 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235979780 debug: counter/2[3]: 235979780 debug: scaled[3]: 0 debug: counter/0[4]: 755114546 debug: counter/1[4]: 235979652 debug: counter/2[4]: 235979652 debug: scaled[4]: 0 debug: counter/0[5]: 1001439771 debug: counter/1[5]: 235979304 debug: counter/2[5]: 235979304 debug: scaled[5]: 0 debug: counter/0[6]: 23723 debug: counter/1[6]: 235979050 debug: counter/2[6]: 235979050 debug: scaled[6]: 0 debug: counter/0[7]: 2213 debug: counter/1[7]: 235978820 debug: counter/2[7]: 235978820 debug: scaled[7]: 0 debug: runtime[0]: 235888002 debug: walltime[0]: 236700533 debug: runtime_cycles[0]: 754881504 debug: counter/0[0]: 235888002 debug: counter/1[0]: 235888002 debug: counter/2[0]: 235888002 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235887793 debug: counter/2[1]: 235887793 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235887645 debug: counter/2[2]: 235887645 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235887499 debug: counter/2[3]: 235887499 debug: scaled[3]: 0 debug: counter/0[4]: 754881504 debug: counter/1[4]: 235887368 debug: counter/2[4]: 235887368 debug: scaled[4]: 0 debug: counter/0[5]: 1001401731 debug: counter/1[5]: 235887024 debug: counter/2[5]: 235887024 debug: scaled[5]: 0 debug: counter/0[6]: 24212 debug: counter/1[6]: 235886786 debug: counter/2[6]: 235886786 debug: scaled[6]: 0 debug: counter/0[7]: 1824 debug: counter/1[7]: 235886560 debug: counter/2[7]: 235886560 debug: scaled[7]: 0 Performance counter stats for '/home/mingo/loop_1b_instructions' (3 runs): 235.913377 task-clock-msecs # 0.997 CPUs ( +- 0.011% ) 2 context-switches # 0.000 M/sec ( +- 0.000% ) 1 CPU-migrations # 0.000 M/sec ( +- 0.000% ) 136 page-faults # 0.001 M/sec ( +- 0.730% ) 755048744 cycles # 3200.534 M/sec ( +- 0.009% ) 1001417586 instructions # 1.326 IPC ( +- 0.001% ) 25277 cache-references # 0.107 M/sec ( +- 3.988% ) 2315 cache-misses # 0.010 M/sec ( +- 9.845% ) 0.236706075 seconds time elapsed. This allows the summary stats to be validated. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 09:40:35 -04:00
* normalize_noise noise values down to stddev:
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
*/
static void normalize_noise(u64 *val)
{
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
double res;
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
res = (double)*val / (run_count * sqrt((double)run_count));
*val = (u64)res;
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
}
static void update_avg(const char *name, int idx, u64 *avg, u64 *val)
perf stat: Enable raw data to be printed If -vv (very verbose) is specified, print out raw data in the following format: $ perf stat -vv -r 3 ./loop_1b_instructions [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] [ perf stat: executing run #3 ... ] debug: runtime[0]: 235871872 debug: walltime[0]: 236646752 debug: runtime_cycles[0]: 755150182 debug: counter/0[0]: 235871872 debug: counter/1[0]: 235871872 debug: counter/2[0]: 235871872 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235870662 debug: counter/2[1]: 235870662 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235870437 debug: counter/2[2]: 235870437 debug: scaled[2]: 0 debug: counter/0[3]: 140 debug: counter/1[3]: 235870298 debug: counter/2[3]: 235870298 debug: scaled[3]: 0 debug: counter/0[4]: 755150182 debug: counter/1[4]: 235870145 debug: counter/2[4]: 235870145 debug: scaled[4]: 0 debug: counter/0[5]: 1001411258 debug: counter/1[5]: 235868838 debug: counter/2[5]: 235868838 debug: scaled[5]: 0 debug: counter/0[6]: 27897 debug: counter/1[6]: 235868560 debug: counter/2[6]: 235868560 debug: scaled[6]: 0 debug: counter/0[7]: 2910 debug: counter/1[7]: 235868151 debug: counter/2[7]: 235868151 debug: scaled[7]: 0 debug: runtime[0]: 235980257 debug: walltime[0]: 236770942 debug: runtime_cycles[0]: 755114546 debug: counter/0[0]: 235980257 debug: counter/1[0]: 235980257 debug: counter/2[0]: 235980257 debug: scaled[0]: 0 debug: counter/0[1]: 3 debug: counter/1[1]: 235980049 debug: counter/2[1]: 235980049 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235979907 debug: counter/2[2]: 235979907 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235979780 debug: counter/2[3]: 235979780 debug: scaled[3]: 0 debug: counter/0[4]: 755114546 debug: counter/1[4]: 235979652 debug: counter/2[4]: 235979652 debug: scaled[4]: 0 debug: counter/0[5]: 1001439771 debug: counter/1[5]: 235979304 debug: counter/2[5]: 235979304 debug: scaled[5]: 0 debug: counter/0[6]: 23723 debug: counter/1[6]: 235979050 debug: counter/2[6]: 235979050 debug: scaled[6]: 0 debug: counter/0[7]: 2213 debug: counter/1[7]: 235978820 debug: counter/2[7]: 235978820 debug: scaled[7]: 0 debug: runtime[0]: 235888002 debug: walltime[0]: 236700533 debug: runtime_cycles[0]: 754881504 debug: counter/0[0]: 235888002 debug: counter/1[0]: 235888002 debug: counter/2[0]: 235888002 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235887793 debug: counter/2[1]: 235887793 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235887645 debug: counter/2[2]: 235887645 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235887499 debug: counter/2[3]: 235887499 debug: scaled[3]: 0 debug: counter/0[4]: 754881504 debug: counter/1[4]: 235887368 debug: counter/2[4]: 235887368 debug: scaled[4]: 0 debug: counter/0[5]: 1001401731 debug: counter/1[5]: 235887024 debug: counter/2[5]: 235887024 debug: scaled[5]: 0 debug: counter/0[6]: 24212 debug: counter/1[6]: 235886786 debug: counter/2[6]: 235886786 debug: scaled[6]: 0 debug: counter/0[7]: 1824 debug: counter/1[7]: 235886560 debug: counter/2[7]: 235886560 debug: scaled[7]: 0 Performance counter stats for '/home/mingo/loop_1b_instructions' (3 runs): 235.913377 task-clock-msecs # 0.997 CPUs ( +- 0.011% ) 2 context-switches # 0.000 M/sec ( +- 0.000% ) 1 CPU-migrations # 0.000 M/sec ( +- 0.000% ) 136 page-faults # 0.001 M/sec ( +- 0.730% ) 755048744 cycles # 3200.534 M/sec ( +- 0.009% ) 1001417586 instructions # 1.326 IPC ( +- 0.001% ) 25277 cache-references # 0.107 M/sec ( +- 3.988% ) 2315 cache-misses # 0.010 M/sec ( +- 9.845% ) 0.236706075 seconds time elapsed. This allows the summary stats to be validated. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 09:40:35 -04:00
{
*avg += *val;
if (verbose > 1)
fprintf(stderr, "debug: %20s[%d]: %Ld\n", name, idx, *val);
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
/*
* Calculate the averages and noises:
*/
static void calc_avg(void)
{
int i, j;
perf stat: Enable raw data to be printed If -vv (very verbose) is specified, print out raw data in the following format: $ perf stat -vv -r 3 ./loop_1b_instructions [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] [ perf stat: executing run #3 ... ] debug: runtime[0]: 235871872 debug: walltime[0]: 236646752 debug: runtime_cycles[0]: 755150182 debug: counter/0[0]: 235871872 debug: counter/1[0]: 235871872 debug: counter/2[0]: 235871872 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235870662 debug: counter/2[1]: 235870662 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235870437 debug: counter/2[2]: 235870437 debug: scaled[2]: 0 debug: counter/0[3]: 140 debug: counter/1[3]: 235870298 debug: counter/2[3]: 235870298 debug: scaled[3]: 0 debug: counter/0[4]: 755150182 debug: counter/1[4]: 235870145 debug: counter/2[4]: 235870145 debug: scaled[4]: 0 debug: counter/0[5]: 1001411258 debug: counter/1[5]: 235868838 debug: counter/2[5]: 235868838 debug: scaled[5]: 0 debug: counter/0[6]: 27897 debug: counter/1[6]: 235868560 debug: counter/2[6]: 235868560 debug: scaled[6]: 0 debug: counter/0[7]: 2910 debug: counter/1[7]: 235868151 debug: counter/2[7]: 235868151 debug: scaled[7]: 0 debug: runtime[0]: 235980257 debug: walltime[0]: 236770942 debug: runtime_cycles[0]: 755114546 debug: counter/0[0]: 235980257 debug: counter/1[0]: 235980257 debug: counter/2[0]: 235980257 debug: scaled[0]: 0 debug: counter/0[1]: 3 debug: counter/1[1]: 235980049 debug: counter/2[1]: 235980049 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235979907 debug: counter/2[2]: 235979907 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235979780 debug: counter/2[3]: 235979780 debug: scaled[3]: 0 debug: counter/0[4]: 755114546 debug: counter/1[4]: 235979652 debug: counter/2[4]: 235979652 debug: scaled[4]: 0 debug: counter/0[5]: 1001439771 debug: counter/1[5]: 235979304 debug: counter/2[5]: 235979304 debug: scaled[5]: 0 debug: counter/0[6]: 23723 debug: counter/1[6]: 235979050 debug: counter/2[6]: 235979050 debug: scaled[6]: 0 debug: counter/0[7]: 2213 debug: counter/1[7]: 235978820 debug: counter/2[7]: 235978820 debug: scaled[7]: 0 debug: runtime[0]: 235888002 debug: walltime[0]: 236700533 debug: runtime_cycles[0]: 754881504 debug: counter/0[0]: 235888002 debug: counter/1[0]: 235888002 debug: counter/2[0]: 235888002 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235887793 debug: counter/2[1]: 235887793 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235887645 debug: counter/2[2]: 235887645 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235887499 debug: counter/2[3]: 235887499 debug: scaled[3]: 0 debug: counter/0[4]: 754881504 debug: counter/1[4]: 235887368 debug: counter/2[4]: 235887368 debug: scaled[4]: 0 debug: counter/0[5]: 1001401731 debug: counter/1[5]: 235887024 debug: counter/2[5]: 235887024 debug: scaled[5]: 0 debug: counter/0[6]: 24212 debug: counter/1[6]: 235886786 debug: counter/2[6]: 235886786 debug: scaled[6]: 0 debug: counter/0[7]: 1824 debug: counter/1[7]: 235886560 debug: counter/2[7]: 235886560 debug: scaled[7]: 0 Performance counter stats for '/home/mingo/loop_1b_instructions' (3 runs): 235.913377 task-clock-msecs # 0.997 CPUs ( +- 0.011% ) 2 context-switches # 0.000 M/sec ( +- 0.000% ) 1 CPU-migrations # 0.000 M/sec ( +- 0.000% ) 136 page-faults # 0.001 M/sec ( +- 0.730% ) 755048744 cycles # 3200.534 M/sec ( +- 0.009% ) 1001417586 instructions # 1.326 IPC ( +- 0.001% ) 25277 cache-references # 0.107 M/sec ( +- 3.988% ) 2315 cache-misses # 0.010 M/sec ( +- 9.845% ) 0.236706075 seconds time elapsed. This allows the summary stats to be validated. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 09:40:35 -04:00
if (verbose > 1)
fprintf(stderr, "\n");
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
for (i = 0; i < run_count; i++) {
perf stat: Enable raw data to be printed If -vv (very verbose) is specified, print out raw data in the following format: $ perf stat -vv -r 3 ./loop_1b_instructions [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] [ perf stat: executing run #3 ... ] debug: runtime[0]: 235871872 debug: walltime[0]: 236646752 debug: runtime_cycles[0]: 755150182 debug: counter/0[0]: 235871872 debug: counter/1[0]: 235871872 debug: counter/2[0]: 235871872 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235870662 debug: counter/2[1]: 235870662 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235870437 debug: counter/2[2]: 235870437 debug: scaled[2]: 0 debug: counter/0[3]: 140 debug: counter/1[3]: 235870298 debug: counter/2[3]: 235870298 debug: scaled[3]: 0 debug: counter/0[4]: 755150182 debug: counter/1[4]: 235870145 debug: counter/2[4]: 235870145 debug: scaled[4]: 0 debug: counter/0[5]: 1001411258 debug: counter/1[5]: 235868838 debug: counter/2[5]: 235868838 debug: scaled[5]: 0 debug: counter/0[6]: 27897 debug: counter/1[6]: 235868560 debug: counter/2[6]: 235868560 debug: scaled[6]: 0 debug: counter/0[7]: 2910 debug: counter/1[7]: 235868151 debug: counter/2[7]: 235868151 debug: scaled[7]: 0 debug: runtime[0]: 235980257 debug: walltime[0]: 236770942 debug: runtime_cycles[0]: 755114546 debug: counter/0[0]: 235980257 debug: counter/1[0]: 235980257 debug: counter/2[0]: 235980257 debug: scaled[0]: 0 debug: counter/0[1]: 3 debug: counter/1[1]: 235980049 debug: counter/2[1]: 235980049 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235979907 debug: counter/2[2]: 235979907 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235979780 debug: counter/2[3]: 235979780 debug: scaled[3]: 0 debug: counter/0[4]: 755114546 debug: counter/1[4]: 235979652 debug: counter/2[4]: 235979652 debug: scaled[4]: 0 debug: counter/0[5]: 1001439771 debug: counter/1[5]: 235979304 debug: counter/2[5]: 235979304 debug: scaled[5]: 0 debug: counter/0[6]: 23723 debug: counter/1[6]: 235979050 debug: counter/2[6]: 235979050 debug: scaled[6]: 0 debug: counter/0[7]: 2213 debug: counter/1[7]: 235978820 debug: counter/2[7]: 235978820 debug: scaled[7]: 0 debug: runtime[0]: 235888002 debug: walltime[0]: 236700533 debug: runtime_cycles[0]: 754881504 debug: counter/0[0]: 235888002 debug: counter/1[0]: 235888002 debug: counter/2[0]: 235888002 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235887793 debug: counter/2[1]: 235887793 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235887645 debug: counter/2[2]: 235887645 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235887499 debug: counter/2[3]: 235887499 debug: scaled[3]: 0 debug: counter/0[4]: 754881504 debug: counter/1[4]: 235887368 debug: counter/2[4]: 235887368 debug: scaled[4]: 0 debug: counter/0[5]: 1001401731 debug: counter/1[5]: 235887024 debug: counter/2[5]: 235887024 debug: scaled[5]: 0 debug: counter/0[6]: 24212 debug: counter/1[6]: 235886786 debug: counter/2[6]: 235886786 debug: scaled[6]: 0 debug: counter/0[7]: 1824 debug: counter/1[7]: 235886560 debug: counter/2[7]: 235886560 debug: scaled[7]: 0 Performance counter stats for '/home/mingo/loop_1b_instructions' (3 runs): 235.913377 task-clock-msecs # 0.997 CPUs ( +- 0.011% ) 2 context-switches # 0.000 M/sec ( +- 0.000% ) 1 CPU-migrations # 0.000 M/sec ( +- 0.000% ) 136 page-faults # 0.001 M/sec ( +- 0.730% ) 755048744 cycles # 3200.534 M/sec ( +- 0.009% ) 1001417586 instructions # 1.326 IPC ( +- 0.001% ) 25277 cache-references # 0.107 M/sec ( +- 3.988% ) 2315 cache-misses # 0.010 M/sec ( +- 9.845% ) 0.236706075 seconds time elapsed. This allows the summary stats to be validated. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 09:40:35 -04:00
update_avg("runtime", 0, &runtime_nsecs_avg, runtime_nsecs + i);
update_avg("walltime", 0, &walltime_nsecs_avg, walltime_nsecs + i);
update_avg("runtime_cycles", 0, &runtime_cycles_avg, runtime_cycles + i);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
for (j = 0; j < nr_counters; j++) {
perf stat: Enable raw data to be printed If -vv (very verbose) is specified, print out raw data in the following format: $ perf stat -vv -r 3 ./loop_1b_instructions [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] [ perf stat: executing run #3 ... ] debug: runtime[0]: 235871872 debug: walltime[0]: 236646752 debug: runtime_cycles[0]: 755150182 debug: counter/0[0]: 235871872 debug: counter/1[0]: 235871872 debug: counter/2[0]: 235871872 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235870662 debug: counter/2[1]: 235870662 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235870437 debug: counter/2[2]: 235870437 debug: scaled[2]: 0 debug: counter/0[3]: 140 debug: counter/1[3]: 235870298 debug: counter/2[3]: 235870298 debug: scaled[3]: 0 debug: counter/0[4]: 755150182 debug: counter/1[4]: 235870145 debug: counter/2[4]: 235870145 debug: scaled[4]: 0 debug: counter/0[5]: 1001411258 debug: counter/1[5]: 235868838 debug: counter/2[5]: 235868838 debug: scaled[5]: 0 debug: counter/0[6]: 27897 debug: counter/1[6]: 235868560 debug: counter/2[6]: 235868560 debug: scaled[6]: 0 debug: counter/0[7]: 2910 debug: counter/1[7]: 235868151 debug: counter/2[7]: 235868151 debug: scaled[7]: 0 debug: runtime[0]: 235980257 debug: walltime[0]: 236770942 debug: runtime_cycles[0]: 755114546 debug: counter/0[0]: 235980257 debug: counter/1[0]: 235980257 debug: counter/2[0]: 235980257 debug: scaled[0]: 0 debug: counter/0[1]: 3 debug: counter/1[1]: 235980049 debug: counter/2[1]: 235980049 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235979907 debug: counter/2[2]: 235979907 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235979780 debug: counter/2[3]: 235979780 debug: scaled[3]: 0 debug: counter/0[4]: 755114546 debug: counter/1[4]: 235979652 debug: counter/2[4]: 235979652 debug: scaled[4]: 0 debug: counter/0[5]: 1001439771 debug: counter/1[5]: 235979304 debug: counter/2[5]: 235979304 debug: scaled[5]: 0 debug: counter/0[6]: 23723 debug: counter/1[6]: 235979050 debug: counter/2[6]: 235979050 debug: scaled[6]: 0 debug: counter/0[7]: 2213 debug: counter/1[7]: 235978820 debug: counter/2[7]: 235978820 debug: scaled[7]: 0 debug: runtime[0]: 235888002 debug: walltime[0]: 236700533 debug: runtime_cycles[0]: 754881504 debug: counter/0[0]: 235888002 debug: counter/1[0]: 235888002 debug: counter/2[0]: 235888002 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235887793 debug: counter/2[1]: 235887793 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235887645 debug: counter/2[2]: 235887645 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235887499 debug: counter/2[3]: 235887499 debug: scaled[3]: 0 debug: counter/0[4]: 754881504 debug: counter/1[4]: 235887368 debug: counter/2[4]: 235887368 debug: scaled[4]: 0 debug: counter/0[5]: 1001401731 debug: counter/1[5]: 235887024 debug: counter/2[5]: 235887024 debug: scaled[5]: 0 debug: counter/0[6]: 24212 debug: counter/1[6]: 235886786 debug: counter/2[6]: 235886786 debug: scaled[6]: 0 debug: counter/0[7]: 1824 debug: counter/1[7]: 235886560 debug: counter/2[7]: 235886560 debug: scaled[7]: 0 Performance counter stats for '/home/mingo/loop_1b_instructions' (3 runs): 235.913377 task-clock-msecs # 0.997 CPUs ( +- 0.011% ) 2 context-switches # 0.000 M/sec ( +- 0.000% ) 1 CPU-migrations # 0.000 M/sec ( +- 0.000% ) 136 page-faults # 0.001 M/sec ( +- 0.730% ) 755048744 cycles # 3200.534 M/sec ( +- 0.009% ) 1001417586 instructions # 1.326 IPC ( +- 0.001% ) 25277 cache-references # 0.107 M/sec ( +- 3.988% ) 2315 cache-misses # 0.010 M/sec ( +- 9.845% ) 0.236706075 seconds time elapsed. This allows the summary stats to be validated. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 09:40:35 -04:00
update_avg("counter/0", j,
event_res_avg[j]+0, event_res[i][j]+0);
update_avg("counter/1", j,
event_res_avg[j]+1, event_res[i][j]+1);
update_avg("counter/2", j,
event_res_avg[j]+2, event_res[i][j]+2);
if (event_scaled[i][j] != -1)
update_avg("scaled", j,
event_scaled_avg + j, event_scaled[i]+j);
else
event_scaled_avg[j] = -1;
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
}
}
runtime_nsecs_avg /= run_count;
walltime_nsecs_avg /= run_count;
runtime_cycles_avg /= run_count;
for (j = 0; j < nr_counters; j++) {
event_res_avg[j][0] /= run_count;
event_res_avg[j][1] /= run_count;
event_res_avg[j][2] /= run_count;
}
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
for (i = 0; i < run_count; i++) {
runtime_nsecs_noise +=
abs((s64)(runtime_nsecs[i] - runtime_nsecs_avg));
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
walltime_nsecs_noise +=
abs((s64)(walltime_nsecs[i] - walltime_nsecs_avg));
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
runtime_cycles_noise +=
abs((s64)(runtime_cycles[i] - runtime_cycles_avg));
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
for (j = 0; j < nr_counters; j++) {
event_res_noise[j][0] +=
abs((s64)(event_res[i][j][0] - event_res_avg[j][0]));
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
event_res_noise[j][1] +=
abs((s64)(event_res[i][j][1] - event_res_avg[j][1]));
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
event_res_noise[j][2] +=
abs((s64)(event_res[i][j][2] - event_res_avg[j][2]));
}
}
perf stat: Enable raw data to be printed If -vv (very verbose) is specified, print out raw data in the following format: $ perf stat -vv -r 3 ./loop_1b_instructions [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] [ perf stat: executing run #3 ... ] debug: runtime[0]: 235871872 debug: walltime[0]: 236646752 debug: runtime_cycles[0]: 755150182 debug: counter/0[0]: 235871872 debug: counter/1[0]: 235871872 debug: counter/2[0]: 235871872 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235870662 debug: counter/2[1]: 235870662 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235870437 debug: counter/2[2]: 235870437 debug: scaled[2]: 0 debug: counter/0[3]: 140 debug: counter/1[3]: 235870298 debug: counter/2[3]: 235870298 debug: scaled[3]: 0 debug: counter/0[4]: 755150182 debug: counter/1[4]: 235870145 debug: counter/2[4]: 235870145 debug: scaled[4]: 0 debug: counter/0[5]: 1001411258 debug: counter/1[5]: 235868838 debug: counter/2[5]: 235868838 debug: scaled[5]: 0 debug: counter/0[6]: 27897 debug: counter/1[6]: 235868560 debug: counter/2[6]: 235868560 debug: scaled[6]: 0 debug: counter/0[7]: 2910 debug: counter/1[7]: 235868151 debug: counter/2[7]: 235868151 debug: scaled[7]: 0 debug: runtime[0]: 235980257 debug: walltime[0]: 236770942 debug: runtime_cycles[0]: 755114546 debug: counter/0[0]: 235980257 debug: counter/1[0]: 235980257 debug: counter/2[0]: 235980257 debug: scaled[0]: 0 debug: counter/0[1]: 3 debug: counter/1[1]: 235980049 debug: counter/2[1]: 235980049 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235979907 debug: counter/2[2]: 235979907 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235979780 debug: counter/2[3]: 235979780 debug: scaled[3]: 0 debug: counter/0[4]: 755114546 debug: counter/1[4]: 235979652 debug: counter/2[4]: 235979652 debug: scaled[4]: 0 debug: counter/0[5]: 1001439771 debug: counter/1[5]: 235979304 debug: counter/2[5]: 235979304 debug: scaled[5]: 0 debug: counter/0[6]: 23723 debug: counter/1[6]: 235979050 debug: counter/2[6]: 235979050 debug: scaled[6]: 0 debug: counter/0[7]: 2213 debug: counter/1[7]: 235978820 debug: counter/2[7]: 235978820 debug: scaled[7]: 0 debug: runtime[0]: 235888002 debug: walltime[0]: 236700533 debug: runtime_cycles[0]: 754881504 debug: counter/0[0]: 235888002 debug: counter/1[0]: 235888002 debug: counter/2[0]: 235888002 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235887793 debug: counter/2[1]: 235887793 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235887645 debug: counter/2[2]: 235887645 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235887499 debug: counter/2[3]: 235887499 debug: scaled[3]: 0 debug: counter/0[4]: 754881504 debug: counter/1[4]: 235887368 debug: counter/2[4]: 235887368 debug: scaled[4]: 0 debug: counter/0[5]: 1001401731 debug: counter/1[5]: 235887024 debug: counter/2[5]: 235887024 debug: scaled[5]: 0 debug: counter/0[6]: 24212 debug: counter/1[6]: 235886786 debug: counter/2[6]: 235886786 debug: scaled[6]: 0 debug: counter/0[7]: 1824 debug: counter/1[7]: 235886560 debug: counter/2[7]: 235886560 debug: scaled[7]: 0 Performance counter stats for '/home/mingo/loop_1b_instructions' (3 runs): 235.913377 task-clock-msecs # 0.997 CPUs ( +- 0.011% ) 2 context-switches # 0.000 M/sec ( +- 0.000% ) 1 CPU-migrations # 0.000 M/sec ( +- 0.000% ) 136 page-faults # 0.001 M/sec ( +- 0.730% ) 755048744 cycles # 3200.534 M/sec ( +- 0.009% ) 1001417586 instructions # 1.326 IPC ( +- 0.001% ) 25277 cache-references # 0.107 M/sec ( +- 3.988% ) 2315 cache-misses # 0.010 M/sec ( +- 9.845% ) 0.236706075 seconds time elapsed. This allows the summary stats to be validated. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 09:40:35 -04:00
normalize_noise(&runtime_nsecs_noise);
normalize_noise(&walltime_nsecs_noise);
normalize_noise(&runtime_cycles_noise);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
for (j = 0; j < nr_counters; j++) {
perf stat: Enable raw data to be printed If -vv (very verbose) is specified, print out raw data in the following format: $ perf stat -vv -r 3 ./loop_1b_instructions [ perf stat: executing run #1 ... ] [ perf stat: executing run #2 ... ] [ perf stat: executing run #3 ... ] debug: runtime[0]: 235871872 debug: walltime[0]: 236646752 debug: runtime_cycles[0]: 755150182 debug: counter/0[0]: 235871872 debug: counter/1[0]: 235871872 debug: counter/2[0]: 235871872 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235870662 debug: counter/2[1]: 235870662 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235870437 debug: counter/2[2]: 235870437 debug: scaled[2]: 0 debug: counter/0[3]: 140 debug: counter/1[3]: 235870298 debug: counter/2[3]: 235870298 debug: scaled[3]: 0 debug: counter/0[4]: 755150182 debug: counter/1[4]: 235870145 debug: counter/2[4]: 235870145 debug: scaled[4]: 0 debug: counter/0[5]: 1001411258 debug: counter/1[5]: 235868838 debug: counter/2[5]: 235868838 debug: scaled[5]: 0 debug: counter/0[6]: 27897 debug: counter/1[6]: 235868560 debug: counter/2[6]: 235868560 debug: scaled[6]: 0 debug: counter/0[7]: 2910 debug: counter/1[7]: 235868151 debug: counter/2[7]: 235868151 debug: scaled[7]: 0 debug: runtime[0]: 235980257 debug: walltime[0]: 236770942 debug: runtime_cycles[0]: 755114546 debug: counter/0[0]: 235980257 debug: counter/1[0]: 235980257 debug: counter/2[0]: 235980257 debug: scaled[0]: 0 debug: counter/0[1]: 3 debug: counter/1[1]: 235980049 debug: counter/2[1]: 235980049 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235979907 debug: counter/2[2]: 235979907 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235979780 debug: counter/2[3]: 235979780 debug: scaled[3]: 0 debug: counter/0[4]: 755114546 debug: counter/1[4]: 235979652 debug: counter/2[4]: 235979652 debug: scaled[4]: 0 debug: counter/0[5]: 1001439771 debug: counter/1[5]: 235979304 debug: counter/2[5]: 235979304 debug: scaled[5]: 0 debug: counter/0[6]: 23723 debug: counter/1[6]: 235979050 debug: counter/2[6]: 235979050 debug: scaled[6]: 0 debug: counter/0[7]: 2213 debug: counter/1[7]: 235978820 debug: counter/2[7]: 235978820 debug: scaled[7]: 0 debug: runtime[0]: 235888002 debug: walltime[0]: 236700533 debug: runtime_cycles[0]: 754881504 debug: counter/0[0]: 235888002 debug: counter/1[0]: 235888002 debug: counter/2[0]: 235888002 debug: scaled[0]: 0 debug: counter/0[1]: 2 debug: counter/1[1]: 235887793 debug: counter/2[1]: 235887793 debug: scaled[1]: 0 debug: counter/0[2]: 1 debug: counter/1[2]: 235887645 debug: counter/2[2]: 235887645 debug: scaled[2]: 0 debug: counter/0[3]: 135 debug: counter/1[3]: 235887499 debug: counter/2[3]: 235887499 debug: scaled[3]: 0 debug: counter/0[4]: 754881504 debug: counter/1[4]: 235887368 debug: counter/2[4]: 235887368 debug: scaled[4]: 0 debug: counter/0[5]: 1001401731 debug: counter/1[5]: 235887024 debug: counter/2[5]: 235887024 debug: scaled[5]: 0 debug: counter/0[6]: 24212 debug: counter/1[6]: 235886786 debug: counter/2[6]: 235886786 debug: scaled[6]: 0 debug: counter/0[7]: 1824 debug: counter/1[7]: 235886560 debug: counter/2[7]: 235886560 debug: scaled[7]: 0 Performance counter stats for '/home/mingo/loop_1b_instructions' (3 runs): 235.913377 task-clock-msecs # 0.997 CPUs ( +- 0.011% ) 2 context-switches # 0.000 M/sec ( +- 0.000% ) 1 CPU-migrations # 0.000 M/sec ( +- 0.000% ) 136 page-faults # 0.001 M/sec ( +- 0.730% ) 755048744 cycles # 3200.534 M/sec ( +- 0.009% ) 1001417586 instructions # 1.326 IPC ( +- 0.001% ) 25277 cache-references # 0.107 M/sec ( +- 3.988% ) 2315 cache-misses # 0.010 M/sec ( +- 9.845% ) 0.236706075 seconds time elapsed. This allows the summary stats to be validated. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 09:40:35 -04:00
normalize_noise(&event_res_noise[j][0]);
normalize_noise(&event_res_noise[j][1]);
normalize_noise(&event_res_noise[j][2]);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
}
}
static void print_stat(int argc, const char **argv)
{
int i, counter;
calc_avg();
fflush(stdout);
fprintf(stderr, "\n");
fprintf(stderr, " Performance counter stats for \'%s", argv[0]);
for (i = 1; i < argc; i++)
fprintf(stderr, " %s", argv[i]);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
fprintf(stderr, "\'");
if (run_count > 1)
fprintf(stderr, " (%d runs)", run_count);
fprintf(stderr, ":\n\n");
for (counter = 0; counter < nr_counters; counter++)
print_counter(counter);
fprintf(stderr, "\n");
fprintf(stderr, " %14.9f seconds time elapsed",
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
(double)walltime_nsecs_avg/1e9);
if (run_count > 1) {
fprintf(stderr, " ( +- %7.3f%% )",
100.0*(double)walltime_nsecs_noise/(double)walltime_nsecs_avg);
}
fprintf(stderr, "\n\n");
}
static volatile int signr = -1;
static void skip_signal(int signo)
{
signr = signo;
}
static void sig_atexit(void)
{
if (signr == -1)
return;
signal(signr, SIG_DFL);
kill(getpid(), signr);
}
static const char * const stat_usage[] = {
"perf stat [<options>] <command>",
NULL
};
static const struct option options[] = {
OPT_CALLBACK('e', "event", NULL, "event",
"event selector. use 'perf list' to list available events",
parse_events),
OPT_BOOLEAN('i', "inherit", &inherit,
"child tasks inherit counters"),
OPT_INTEGER('p', "pid", &target_pid,
"stat events on existing pid"),
OPT_BOOLEAN('a', "all-cpus", &system_wide,
"system-wide collection from all CPUs"),
OPT_BOOLEAN('S', "scale", &scale,
"scale/normalize counters"),
OPT_BOOLEAN('v', "verbose", &verbose,
"be more verbose (show counter open errors, etc)"),
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
OPT_INTEGER('r', "repeat", &run_count,
"repeat command and print average + stddev (max: 100)"),
OPT_BOOLEAN('n', "null", &null_run,
"null run - dont start any counters"),
OPT_END()
};
int cmd_stat(int argc, const char **argv, const char *prefix)
{
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
int status;
argc = parse_options(argc, argv, options, stat_usage, 0);
if (!argc)
usage_with_options(stat_usage, options);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
if (run_count <= 0 || run_count > MAX_RUN)
usage_with_options(stat_usage, options);
/* Set attrs and nr_counters if no event is selected and !null_run */
if (!null_run && !nr_counters) {
memcpy(attrs, default_attrs, sizeof(default_attrs));
nr_counters = ARRAY_SIZE(default_attrs);
}
nr_cpus = sysconf(_SC_NPROCESSORS_ONLN);
assert(nr_cpus <= MAX_NR_CPUS);
assert(nr_cpus >= 0);
/*
* We dont want to block the signals - that would cause
* child tasks to inherit that and Ctrl-C would not work.
* What we want is for Ctrl-C to work in the exec()-ed
* task, but being ignored by perf stat itself:
*/
atexit(sig_atexit);
signal(SIGINT, skip_signal);
signal(SIGALRM, skip_signal);
signal(SIGABRT, skip_signal);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
status = 0;
for (run_idx = 0; run_idx < run_count; run_idx++) {
if (run_count != 1 && verbose)
fprintf(stderr, "[ perf stat: executing run #%d ... ]\n", run_idx + 1);
perf stat: Add feature to run and measure a command multiple times Add the --repeat <n> feature to perf stat, which repeats a given command up to a 100 times, collects the stats and calculates an average and a stddev. For example, the following oneliner 'perf stat' command runs hackbench 5 times and prints a tabulated result of all metrics, with averages and noise levels (in percentage) printed: aldebaran:~/linux/linux/tools/perf> ./perf stat --repeat 5 ~/hackbench 10 Time: 0.117 Time: 0.108 Time: 0.089 Time: 0.088 Time: 0.100 Performance counter stats for '/home/mingo/hackbench 10' (5 runs): 1243.989586 task-clock-msecs # 10.460 CPUs ( +- 4.720% ) 47706 context-switches # 0.038 M/sec ( +- 19.706% ) 387 CPU-migrations # 0.000 M/sec ( +- 3.608% ) 17793 page-faults # 0.014 M/sec ( +- 0.354% ) 3770941606 cycles # 3031.329 M/sec ( +- 4.621% ) 1566372416 instructions # 0.415 IPC ( +- 2.703% ) 16783421 cache-references # 13.492 M/sec ( +- 5.202% ) 7128590 cache-misses # 5.730 M/sec ( +- 7.420% ) 0.118924455 seconds time elapsed. The goal of this feature is to allow the reliance on these accurate statistics and to know how many times a command has to be repeated for the noise to go down to an acceptable level. (The -v option can be used to see a line printed out as each run progresses.) Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-13 08:57:28 -04:00
status = run_perf_stat(argc, argv);
}
print_stat(argc, argv);
return status;
}