android_kernel_xiaomi_sm8350/drivers/acpi/parser/psxface.c

390 lines
11 KiB
C
Raw Normal View History

/******************************************************************************
*
* Module Name: psxface - Parser external interfaces
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acparser.h>
#include <acpi/acdispat.h>
#include <acpi/acinterp.h>
#define _COMPONENT ACPI_PARSER
ACPI_MODULE_NAME("psxface")
/* Local Prototypes */
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 19:03:00 -04:00
static void acpi_ps_start_trace(struct acpi_parameter_info *info);
static void acpi_ps_stop_trace(struct acpi_parameter_info *info);
static acpi_status acpi_ps_execute_pass(struct acpi_parameter_info *info);
static void
acpi_ps_update_parameter_list(struct acpi_parameter_info *info, u16 action);
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 19:03:00 -04:00
/*******************************************************************************
*
* FUNCTION: acpi_debug_trace
*
* PARAMETERS: method_name - Valid ACPI name string
* debug_level - Optional level mask. 0 to use default
* debug_layer - Optional layer mask. 0 to use default
* Flags - bit 1: one shot(1) or persistent(0)
*
* RETURN: Status
*
* DESCRIPTION: External interface to enable debug tracing during control
* method execution
*
******************************************************************************/
acpi_status
acpi_debug_trace(char *name, u32 debug_level, u32 debug_layer, u32 flags)
{
acpi_status status;
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return (status);
}
/* TBDs: Validate name, allow full path or just nameseg */
[ACPI] ACPICA 20051117 Fixed a problem in the AML parser where the method thread count could be decremented below zero if any errors occurred during the method parse phase. This should eliminate AE_AML_METHOD_LIMIT exceptions seen on some machines. This also fixed a related regression with the mechanism that detects and corrects methods that cannot properly handle reentrancy (related to the deployment of the new OwnerId mechanism.) Eliminated the pre-parsing of control methods (to detect errors) during table load. Related to the problem above, this was causing unwind issues if any errors occurred during the parse, and it seemed to be overkill. A table load should not be aborted if there are problems with any single control method, thus rendering this feature rather pointless. Fixed a problem with the new table-driven resource manager where an internal buffer overflow could occur for small resource templates. Implemented a new external interface, acpi_get_vendor_resource() This interface will find and return a vendor-defined resource descriptor within a _CRS or _PRS method via an ACPI 3.0 UUID match. (from Bjorn Helgaas) Removed the length limit (200) on string objects as per the upcoming ACPI 3.0A specification. This affects the following areas of the interpreter: 1) any implicit conversion of a Buffer to a String, 2) a String object result of the ASL Concatentate operator, 3) the String object result of the ASL ToString operator. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-11-17 13:07:00 -05:00
acpi_gbl_trace_method_name = *ACPI_CAST_PTR(u32, name);
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 19:03:00 -04:00
acpi_gbl_trace_flags = flags;
if (debug_level) {
acpi_gbl_trace_dbg_level = debug_level;
}
if (debug_layer) {
acpi_gbl_trace_dbg_layer = debug_layer;
}
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_start_trace
*
* PARAMETERS: Info - Method info struct
*
* RETURN: None
*
* DESCRIPTION: Start control method execution trace
*
******************************************************************************/
static void acpi_ps_start_trace(struct acpi_parameter_info *info)
{
acpi_status status;
ACPI_FUNCTION_ENTRY();
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return;
}
if ((!acpi_gbl_trace_method_name) ||
(acpi_gbl_trace_method_name != info->node->name.integer)) {
goto exit;
}
acpi_gbl_original_dbg_level = acpi_dbg_level;
acpi_gbl_original_dbg_layer = acpi_dbg_layer;
acpi_dbg_level = 0x00FFFFFF;
acpi_dbg_layer = ACPI_UINT32_MAX;
if (acpi_gbl_trace_dbg_level) {
acpi_dbg_level = acpi_gbl_trace_dbg_level;
}
if (acpi_gbl_trace_dbg_layer) {
acpi_dbg_layer = acpi_gbl_trace_dbg_layer;
}
exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_stop_trace
*
* PARAMETERS: Info - Method info struct
*
* RETURN: None
*
* DESCRIPTION: Stop control method execution trace
*
******************************************************************************/
static void acpi_ps_stop_trace(struct acpi_parameter_info *info)
{
acpi_status status;
ACPI_FUNCTION_ENTRY();
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return;
}
if ((!acpi_gbl_trace_method_name) ||
(acpi_gbl_trace_method_name != info->node->name.integer)) {
goto exit;
}
/* Disable further tracing if type is one-shot */
if (acpi_gbl_trace_flags & 1) {
acpi_gbl_trace_method_name = 0;
acpi_gbl_trace_dbg_level = 0;
acpi_gbl_trace_dbg_layer = 0;
}
acpi_dbg_level = acpi_gbl_original_dbg_level;
acpi_dbg_layer = acpi_gbl_original_dbg_layer;
exit:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_execute_method
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 22:49:35 -04:00
* PARAMETERS: Info - Method info block, contains:
* Node - Method Node to execute
* obj_desc - Method object
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 22:49:35 -04:00
* Parameters - List of parameters to pass to the method,
* terminated by NULL. Params itself may be
* NULL if no parameters are being passed.
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 22:49:35 -04:00
* return_object - Where to put method's return value (if
* any). If NULL, no value is returned.
* parameter_type - Type of Parameter list
* return_object - Where to put method's return value (if
* any). If NULL, no value is returned.
* pass_number - Parse or execute pass
*
* RETURN: Status
*
* DESCRIPTION: Execute a control method
*
******************************************************************************/
acpi_status acpi_ps_execute_method(struct acpi_parameter_info *info)
{
acpi_status status;
ACPI_FUNCTION_TRACE("ps_execute_method");
/* Validate the Info and method Node */
if (!info || !info->node) {
return_ACPI_STATUS(AE_NULL_ENTRY);
}
/* Init for new method, wait on concurrency semaphore */
status =
acpi_ds_begin_method_execution(info->node, info->obj_desc, NULL);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
* The caller "owns" the parameters, so give each one an extra
* reference
*/
acpi_ps_update_parameter_list(info, REF_INCREMENT);
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 19:03:00 -04:00
/* Begin tracing if requested */
acpi_ps_start_trace(info);
/*
* 1) Perform the first pass parse of the method to enter any
* named objects that it creates into the namespace
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"**** Begin Method Parse **** Entry=%p obj=%p\n",
info->node, info->obj_desc));
info->pass_number = 1;
status = acpi_ps_execute_pass(info);
if (ACPI_FAILURE(status)) {
goto cleanup;
}
/*
* 2) Execute the method. Performs second pass parse simultaneously
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"**** Begin Method Execution **** Entry=%p obj=%p\n",
info->node, info->obj_desc));
info->pass_number = 3;
status = acpi_ps_execute_pass(info);
cleanup:
[ACPI] ACPICA 20050930 Completed a major overhaul of the Resource Manager code - specifically, optimizations in the area of the AML/internal resource conversion code. The code has been optimized to simplify and eliminate duplicated code, CPU stack use has been decreased by optimizing function parameters and local variables, and naming conventions across the manager have been standardized for clarity and ease of maintenance (this includes function, parameter, variable, and struct/typedef names.) All Resource Manager dispatch and information tables have been moved to a single location for clarity and ease of maintenance. One new file was created, named "rsinfo.c". The ACPI return macros (return_ACPI_STATUS, etc.) have been modified to guarantee that the argument is not evaluated twice, making them less prone to macro side-effects. However, since there exists the possibility of additional stack use if a particular compiler cannot optimize them (such as in the debug generation case), the original macros are optionally available. Note that some invocations of the return_VALUE macro may now cause size mismatch warnings; the return_UINT8 and return_UINT32 macros are provided to eliminate these. (From Randy Dunlap) Implemented a new mechanism to enable debug tracing for individual control methods. A new external interface, acpi_debug_trace(), is provided to enable this mechanism. The intent is to allow the host OS to easily enable and disable tracing for problematic control methods. This interface can be easily exposed to a user or debugger interface if desired. See the file psxface.c for details. acpi_ut_callocate() will now return a valid pointer if a length of zero is specified - a length of one is used and a warning is issued. This matches the behavior of acpi_ut_allocate(). Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-09-30 19:03:00 -04:00
/* End optional tracing */
acpi_ps_stop_trace(info);
/* Take away the extra reference that we gave the parameters above */
acpi_ps_update_parameter_list(info, REF_DECREMENT);
/* Exit now if error above */
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
* If the method has returned an object, signal this to the caller with
* a control exception code
*/
if (info->return_object) {
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
"Method returned obj_desc=%p\n",
info->return_object));
ACPI_DUMP_STACK_ENTRY(info->return_object);
status = AE_CTRL_RETURN_VALUE;
}
return_ACPI_STATUS(status);
}
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-18 22:49:35 -04:00
/*******************************************************************************
*
* FUNCTION: acpi_ps_update_parameter_list
*
* PARAMETERS: Info - See struct acpi_parameter_info
* (Used: parameter_type and Parameters)
* Action - Add or Remove reference
*
* RETURN: Status
*
* DESCRIPTION: Update reference count on all method parameter objects
*
******************************************************************************/
static void
acpi_ps_update_parameter_list(struct acpi_parameter_info *info, u16 action)
{
acpi_native_uint i;
if ((info->parameter_type == ACPI_PARAM_ARGS) && (info->parameters)) {
/* Update reference count for each parameter */
for (i = 0; info->parameters[i]; i++) {
/* Ignore errors, just do them all */
(void)acpi_ut_update_object_reference(info->
parameters[i],
action);
}
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ps_execute_pass
*
* PARAMETERS: Info - See struct acpi_parameter_info
* (Used: pass_number, Node, and obj_desc)
*
* RETURN: Status
*
* DESCRIPTION: Single AML pass: Parse or Execute a control method
*
******************************************************************************/
static acpi_status acpi_ps_execute_pass(struct acpi_parameter_info *info)
{
acpi_status status;
union acpi_parse_object *op;
struct acpi_walk_state *walk_state;
ACPI_FUNCTION_TRACE("ps_execute_pass");
/* Create and init a Root Node */
op = acpi_ps_create_scope_op();
if (!op) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Create and initialize a new walk state */
walk_state =
acpi_ds_create_walk_state(info->obj_desc->method.owner_id, NULL,
NULL, NULL);
if (!walk_state) {
status = AE_NO_MEMORY;
goto cleanup;
}
status = acpi_ds_init_aml_walk(walk_state, op, info->node,
info->obj_desc->method.aml_start,
info->obj_desc->method.aml_length,
info->pass_number == 1 ? NULL : info,
info->pass_number);
if (ACPI_FAILURE(status)) {
acpi_ds_delete_walk_state(walk_state);
goto cleanup;
}
/* Parse the AML */
status = acpi_ps_parse_aml(walk_state);
/* Walk state was deleted by parse_aml */
cleanup:
acpi_ps_delete_parse_tree(op);
return_ACPI_STATUS(status);
}