android_kernel_xiaomi_sm8350/drivers/net/wireless/ipw2200.h

2001 lines
58 KiB
C
Raw Normal View History

2005-03-25 13:31:53 -05:00
/******************************************************************************
Copyright(c) 2003 - 2006 Intel Corporation. All rights reserved.
This program is free software; you can redistribute it and/or modify it
under the terms of version 2 of the GNU General Public License as
2005-03-25 13:31:53 -05:00
published by the Free Software Foundation.
This program is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
2005-03-25 13:31:53 -05:00
more details.
2005-03-25 13:31:53 -05:00
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc., 59
2005-03-25 13:31:53 -05:00
Temple Place - Suite 330, Boston, MA 02111-1307, USA.
2005-03-25 13:31:53 -05:00
The full GNU General Public License is included in this distribution in the
file called LICENSE.
2005-03-25 13:31:53 -05:00
Contact Information:
James P. Ketrenos <ipw2100-admin@linux.intel.com>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
******************************************************************************/
#ifndef __ipw2200_h__
#define __ipw2200_h__
#define WEXT_USECHANNELS 1
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/mutex.h>
2005-03-25 13:31:53 -05:00
#include <linux/pci.h>
#include <linux/netdevice.h>
#include <linux/ethtool.h>
#include <linux/skbuff.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
#include <linux/random.h>
#include <linux/dma-mapping.h>
2005-03-25 13:31:53 -05:00
#include <linux/firmware.h>
#include <linux/wireless.h>
#include <linux/dma-mapping.h>
#include <linux/jiffies.h>
2005-03-25 13:31:53 -05:00
#include <asm/io.h>
#include <net/ieee80211.h>
#include <net/ieee80211_radiotap.h>
2005-03-25 13:31:53 -05:00
#define DRV_NAME "ipw2200"
#include <linux/workqueue.h>
/* Authentication and Association States */
enum connection_manager_assoc_states {
2005-03-25 13:31:53 -05:00
CMAS_INIT = 0,
CMAS_TX_AUTH_SEQ_1,
CMAS_RX_AUTH_SEQ_2,
CMAS_AUTH_SEQ_1_PASS,
CMAS_AUTH_SEQ_1_FAIL,
CMAS_TX_AUTH_SEQ_3,
CMAS_RX_AUTH_SEQ_4,
CMAS_AUTH_SEQ_2_PASS,
CMAS_AUTH_SEQ_2_FAIL,
CMAS_AUTHENTICATED,
CMAS_TX_ASSOC,
CMAS_RX_ASSOC_RESP,
CMAS_ASSOCIATED,
CMAS_LAST
};
#define IPW_WAIT (1<<0)
#define IPW_QUIET (1<<1)
#define IPW_ROAMING (1<<2)
#define IPW_POWER_MODE_CAM 0x00 //(always on)
#define IPW_POWER_INDEX_1 0x01
#define IPW_POWER_INDEX_2 0x02
#define IPW_POWER_INDEX_3 0x03
#define IPW_POWER_INDEX_4 0x04
#define IPW_POWER_INDEX_5 0x05
#define IPW_POWER_AC 0x06
#define IPW_POWER_BATTERY 0x07
#define IPW_POWER_LIMIT 0x07
#define IPW_POWER_MASK 0x0F
#define IPW_POWER_ENABLED 0x10
#define IPW_POWER_LEVEL(x) ((x) & IPW_POWER_MASK)
#define IPW_CMD_HOST_COMPLETE 2
#define IPW_CMD_POWER_DOWN 4
#define IPW_CMD_SYSTEM_CONFIG 6
#define IPW_CMD_MULTICAST_ADDRESS 7
#define IPW_CMD_SSID 8
#define IPW_CMD_ADAPTER_ADDRESS 11
#define IPW_CMD_PORT_TYPE 12
#define IPW_CMD_RTS_THRESHOLD 15
#define IPW_CMD_FRAG_THRESHOLD 16
#define IPW_CMD_POWER_MODE 17
#define IPW_CMD_WEP_KEY 18
#define IPW_CMD_TGI_TX_KEY 19
#define IPW_CMD_SCAN_REQUEST 20
#define IPW_CMD_ASSOCIATE 21
#define IPW_CMD_SUPPORTED_RATES 22
#define IPW_CMD_SCAN_ABORT 23
#define IPW_CMD_TX_FLUSH 24
#define IPW_CMD_QOS_PARAMETERS 25
#define IPW_CMD_SCAN_REQUEST_EXT 26
#define IPW_CMD_DINO_CONFIG 30
#define IPW_CMD_RSN_CAPABILITIES 31
#define IPW_CMD_RX_KEY 32
#define IPW_CMD_CARD_DISABLE 33
#define IPW_CMD_SEED_NUMBER 34
#define IPW_CMD_TX_POWER 35
#define IPW_CMD_COUNTRY_INFO 36
#define IPW_CMD_AIRONET_INFO 37
#define IPW_CMD_AP_TX_POWER 38
#define IPW_CMD_CCKM_INFO 39
#define IPW_CMD_CCX_VER_INFO 40
#define IPW_CMD_SET_CALIBRATION 41
#define IPW_CMD_SENSITIVITY_CALIB 42
#define IPW_CMD_RETRY_LIMIT 51
#define IPW_CMD_IPW_PRE_POWER_DOWN 58
#define IPW_CMD_VAP_BEACON_TEMPLATE 60
#define IPW_CMD_VAP_DTIM_PERIOD 61
#define IPW_CMD_EXT_SUPPORTED_RATES 62
#define IPW_CMD_VAP_LOCAL_TX_PWR_CONSTRAINT 63
#define IPW_CMD_VAP_QUIET_INTERVALS 64
#define IPW_CMD_VAP_CHANNEL_SWITCH 65
#define IPW_CMD_VAP_MANDATORY_CHANNELS 66
#define IPW_CMD_VAP_CELL_PWR_LIMIT 67
#define IPW_CMD_VAP_CF_PARAM_SET 68
#define IPW_CMD_VAP_SET_BEACONING_STATE 69
#define IPW_CMD_MEASUREMENT 80
#define IPW_CMD_POWER_CAPABILITY 81
#define IPW_CMD_SUPPORTED_CHANNELS 82
#define IPW_CMD_TPC_REPORT 83
#define IPW_CMD_WME_INFO 84
#define IPW_CMD_PRODUCTION_COMMAND 85
#define IPW_CMD_LINKSYS_EOU_INFO 90
#define RFD_SIZE 4
#define NUM_TFD_CHUNKS 6
#define TX_QUEUE_SIZE 32
#define RX_QUEUE_SIZE 32
#define DINO_CMD_WEP_KEY 0x08
#define DINO_CMD_TX 0x0B
#define DCT_ANTENNA_A 0x01
#define DCT_ANTENNA_B 0x02
#define IPW_A_MODE 0
#define IPW_B_MODE 1
#define IPW_G_MODE 2
/*
* TX Queue Flag Definitions
2005-03-25 13:31:53 -05:00
*/
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
/* tx wep key definition */
#define DCT_WEP_KEY_NOT_IMMIDIATE 0x00
#define DCT_WEP_KEY_64Bit 0x40
#define DCT_WEP_KEY_128Bit 0x80
#define DCT_WEP_KEY_128bitIV 0xC0
#define DCT_WEP_KEY_SIZE_MASK 0xC0
#define DCT_WEP_KEY_INDEX_MASK 0x0F
#define DCT_WEP_INDEX_USE_IMMEDIATE 0x20
2005-03-25 13:31:53 -05:00
/* abort attempt if mgmt frame is rx'd */
#define DCT_FLAG_ABORT_MGMT 0x01
2005-03-25 13:31:53 -05:00
/* require CTS */
#define DCT_FLAG_CTS_REQUIRED 0x02
/* use short preamble */
#define DCT_FLAG_LONG_PREAMBLE 0x00
#define DCT_FLAG_SHORT_PREAMBLE 0x04
2005-03-25 13:31:53 -05:00
/* RTS/CTS first */
#define DCT_FLAG_RTS_REQD 0x08
/* dont calculate duration field */
#define DCT_FLAG_DUR_SET 0x10
/* even if MAC WEP set (allows pre-encrypt) */
#define DCT_FLAG_NO_WEP 0x20
2005-03-25 13:31:53 -05:00
/* overwrite TSF field */
#define DCT_FLAG_TSF_REQD 0x40
/* ACK rx is expected to follow */
#define DCT_FLAG_ACK_REQD 0x80
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
/* TX flags extension */
2005-03-25 13:31:53 -05:00
#define DCT_FLAG_EXT_MODE_CCK 0x01
#define DCT_FLAG_EXT_MODE_OFDM 0x00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define DCT_FLAG_EXT_SECURITY_WEP 0x00
#define DCT_FLAG_EXT_SECURITY_NO DCT_FLAG_EXT_SECURITY_WEP
#define DCT_FLAG_EXT_SECURITY_CKIP 0x04
#define DCT_FLAG_EXT_SECURITY_CCM 0x08
#define DCT_FLAG_EXT_SECURITY_TKIP 0x0C
#define DCT_FLAG_EXT_SECURITY_MASK 0x0C
#define DCT_FLAG_EXT_QOS_ENABLED 0x10
#define DCT_FLAG_EXT_HC_NO_SIFS_PIFS 0x00
#define DCT_FLAG_EXT_HC_SIFS 0x20
#define DCT_FLAG_EXT_HC_PIFS 0x40
2005-03-25 13:31:53 -05:00
#define TX_RX_TYPE_MASK 0xFF
#define TX_FRAME_TYPE 0x00
#define TX_HOST_COMMAND_TYPE 0x01
#define RX_FRAME_TYPE 0x09
#define RX_HOST_NOTIFICATION_TYPE 0x03
#define RX_HOST_CMD_RESPONSE_TYPE 0x04
#define RX_TX_FRAME_RESPONSE_TYPE 0x05
#define TFD_NEED_IRQ_MASK 0x04
#define HOST_CMD_DINO_CONFIG 30
#define HOST_NOTIFICATION_STATUS_ASSOCIATED 10
#define HOST_NOTIFICATION_STATUS_AUTHENTICATE 11
#define HOST_NOTIFICATION_STATUS_SCAN_CHANNEL_RESULT 12
#define HOST_NOTIFICATION_STATUS_SCAN_COMPLETED 13
#define HOST_NOTIFICATION_STATUS_FRAG_LENGTH 14
#define HOST_NOTIFICATION_STATUS_LINK_DETERIORATION 15
#define HOST_NOTIFICATION_DINO_CONFIG_RESPONSE 16
#define HOST_NOTIFICATION_STATUS_BEACON_STATE 17
#define HOST_NOTIFICATION_STATUS_TGI_TX_KEY 18
#define HOST_NOTIFICATION_TX_STATUS 19
#define HOST_NOTIFICATION_CALIB_KEEP_RESULTS 20
#define HOST_NOTIFICATION_MEASUREMENT_STARTED 21
#define HOST_NOTIFICATION_MEASUREMENT_ENDED 22
#define HOST_NOTIFICATION_CHANNEL_SWITCHED 23
#define HOST_NOTIFICATION_RX_DURING_QUIET_PERIOD 24
#define HOST_NOTIFICATION_NOISE_STATS 25
#define HOST_NOTIFICATION_S36_MEASUREMENT_ACCEPTED 30
2005-03-25 13:31:53 -05:00
#define HOST_NOTIFICATION_S36_MEASUREMENT_REFUSED 31
#define HOST_NOTIFICATION_STATUS_BEACON_MISSING 1
#define IPW_MB_ROAMING_THRESHOLD_MIN 1
2005-03-25 13:31:53 -05:00
#define IPW_MB_ROAMING_THRESHOLD_DEFAULT 8
#define IPW_MB_ROAMING_THRESHOLD_MAX 30
#define IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT 3*IPW_MB_ROAMING_THRESHOLD_DEFAULT
#define IPW_REAL_RATE_RX_PACKET_THRESHOLD 300
2005-03-25 13:31:53 -05:00
#define MACADRR_BYTE_LEN 6
#define DCR_TYPE_AP 0x01
#define DCR_TYPE_WLAP 0x02
#define DCR_TYPE_MU_ESS 0x03
#define DCR_TYPE_MU_IBSS 0x04
#define DCR_TYPE_MU_PIBSS 0x05
#define DCR_TYPE_SNIFFER 0x06
#define DCR_TYPE_MU_BSS DCR_TYPE_MU_ESS
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
/* QoS definitions */
#define CW_MIN_OFDM 15
#define CW_MAX_OFDM 1023
#define CW_MIN_CCK 31
#define CW_MAX_CCK 1023
#define QOS_TX0_CW_MIN_OFDM CW_MIN_OFDM
#define QOS_TX1_CW_MIN_OFDM CW_MIN_OFDM
#define QOS_TX2_CW_MIN_OFDM ( (CW_MIN_OFDM + 1) / 2 - 1 )
#define QOS_TX3_CW_MIN_OFDM ( (CW_MIN_OFDM + 1) / 4 - 1 )
#define QOS_TX0_CW_MIN_CCK CW_MIN_CCK
#define QOS_TX1_CW_MIN_CCK CW_MIN_CCK
#define QOS_TX2_CW_MIN_CCK ( (CW_MIN_CCK + 1) / 2 - 1 )
#define QOS_TX3_CW_MIN_CCK ( (CW_MIN_CCK + 1) / 4 - 1 )
#define QOS_TX0_CW_MAX_OFDM CW_MAX_OFDM
#define QOS_TX1_CW_MAX_OFDM CW_MAX_OFDM
#define QOS_TX2_CW_MAX_OFDM CW_MIN_OFDM
#define QOS_TX3_CW_MAX_OFDM ( (CW_MIN_OFDM + 1) / 2 - 1 )
#define QOS_TX0_CW_MAX_CCK CW_MAX_CCK
#define QOS_TX1_CW_MAX_CCK CW_MAX_CCK
#define QOS_TX2_CW_MAX_CCK CW_MIN_CCK
#define QOS_TX3_CW_MAX_CCK ( (CW_MIN_CCK + 1) / 2 - 1 )
#define QOS_TX0_AIFS (3 - QOS_AIFSN_MIN_VALUE)
#define QOS_TX1_AIFS (7 - QOS_AIFSN_MIN_VALUE)
#define QOS_TX2_AIFS (2 - QOS_AIFSN_MIN_VALUE)
#define QOS_TX3_AIFS (2 - QOS_AIFSN_MIN_VALUE)
#define QOS_TX0_ACM 0
#define QOS_TX1_ACM 0
#define QOS_TX2_ACM 0
#define QOS_TX3_ACM 0
#define QOS_TX0_TXOP_LIMIT_CCK 0
#define QOS_TX1_TXOP_LIMIT_CCK 0
#define QOS_TX2_TXOP_LIMIT_CCK 6016
#define QOS_TX3_TXOP_LIMIT_CCK 3264
#define QOS_TX0_TXOP_LIMIT_OFDM 0
#define QOS_TX1_TXOP_LIMIT_OFDM 0
#define QOS_TX2_TXOP_LIMIT_OFDM 3008
#define QOS_TX3_TXOP_LIMIT_OFDM 1504
#define DEF_TX0_CW_MIN_OFDM CW_MIN_OFDM
#define DEF_TX1_CW_MIN_OFDM CW_MIN_OFDM
#define DEF_TX2_CW_MIN_OFDM CW_MIN_OFDM
#define DEF_TX3_CW_MIN_OFDM CW_MIN_OFDM
#define DEF_TX0_CW_MIN_CCK CW_MIN_CCK
#define DEF_TX1_CW_MIN_CCK CW_MIN_CCK
#define DEF_TX2_CW_MIN_CCK CW_MIN_CCK
#define DEF_TX3_CW_MIN_CCK CW_MIN_CCK
#define DEF_TX0_CW_MAX_OFDM CW_MAX_OFDM
#define DEF_TX1_CW_MAX_OFDM CW_MAX_OFDM
#define DEF_TX2_CW_MAX_OFDM CW_MAX_OFDM
#define DEF_TX3_CW_MAX_OFDM CW_MAX_OFDM
#define DEF_TX0_CW_MAX_CCK CW_MAX_CCK
#define DEF_TX1_CW_MAX_CCK CW_MAX_CCK
#define DEF_TX2_CW_MAX_CCK CW_MAX_CCK
#define DEF_TX3_CW_MAX_CCK CW_MAX_CCK
#define DEF_TX0_AIFS 0
#define DEF_TX1_AIFS 0
#define DEF_TX2_AIFS 0
#define DEF_TX3_AIFS 0
#define DEF_TX0_ACM 0
#define DEF_TX1_ACM 0
#define DEF_TX2_ACM 0
#define DEF_TX3_ACM 0
#define DEF_TX0_TXOP_LIMIT_CCK 0
#define DEF_TX1_TXOP_LIMIT_CCK 0
#define DEF_TX2_TXOP_LIMIT_CCK 0
#define DEF_TX3_TXOP_LIMIT_CCK 0
#define DEF_TX0_TXOP_LIMIT_OFDM 0
#define DEF_TX1_TXOP_LIMIT_OFDM 0
#define DEF_TX2_TXOP_LIMIT_OFDM 0
#define DEF_TX3_TXOP_LIMIT_OFDM 0
#define QOS_QOS_SETS 3
#define QOS_PARAM_SET_ACTIVE 0
#define QOS_PARAM_SET_DEF_CCK 1
#define QOS_PARAM_SET_DEF_OFDM 2
#define CTRL_QOS_NO_ACK (0x0020)
#define IPW_TX_QUEUE_1 1
#define IPW_TX_QUEUE_2 2
#define IPW_TX_QUEUE_3 3
#define IPW_TX_QUEUE_4 4
/* QoS sturctures */
struct ipw_qos_info {
int qos_enable;
struct ieee80211_qos_parameters *def_qos_parm_OFDM;
struct ieee80211_qos_parameters *def_qos_parm_CCK;
u32 burst_duration_CCK;
u32 burst_duration_OFDM;
u16 qos_no_ack_mask;
int burst_enable;
};
/**************************************************************/
2005-03-25 13:31:53 -05:00
/**
* Generic queue structure
*
2005-03-25 13:31:53 -05:00
* Contains common data for Rx and Tx queues
*/
struct clx2_queue {
int n_bd; /**< number of BDs in this queue */
int first_empty; /**< 1-st empty entry (index) */
int last_used; /**< last used entry (index) */
u32 reg_w; /**< 'write' reg (queue head), addr in domain 1 */
u32 reg_r; /**< 'read' reg (queue tail), addr in domain 1 */
dma_addr_t dma_addr; /**< physical addr for BD's */
int low_mark; /**< low watermark, resume queue if free space more than this */
int high_mark; /**< high watermark, stop queue if free space less than this */
2005-03-25 13:31:53 -05:00
} __attribute__ ((packed));
struct machdr32 {
2005-03-25 13:31:53 -05:00
u16 frame_ctl;
u16 duration; // watch out for endians!
u8 addr1[MACADRR_BYTE_LEN];
u8 addr2[MACADRR_BYTE_LEN];
u8 addr3[MACADRR_BYTE_LEN];
u16 seq_ctrl; // more endians!
u8 addr4[MACADRR_BYTE_LEN];
2005-03-25 13:31:53 -05:00
u16 qos_ctrl;
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
struct machdr30 {
2005-03-25 13:31:53 -05:00
u16 frame_ctl;
u16 duration; // watch out for endians!
u8 addr1[MACADRR_BYTE_LEN];
u8 addr2[MACADRR_BYTE_LEN];
u8 addr3[MACADRR_BYTE_LEN];
u16 seq_ctrl; // more endians!
u8 addr4[MACADRR_BYTE_LEN];
} __attribute__ ((packed));
struct machdr26 {
2005-03-25 13:31:53 -05:00
u16 frame_ctl;
u16 duration; // watch out for endians!
u8 addr1[MACADRR_BYTE_LEN];
u8 addr2[MACADRR_BYTE_LEN];
u8 addr3[MACADRR_BYTE_LEN];
u16 seq_ctrl; // more endians!
2005-03-25 13:31:53 -05:00
u16 qos_ctrl;
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
struct machdr24 {
2005-03-25 13:31:53 -05:00
u16 frame_ctl;
u16 duration; // watch out for endians!
u8 addr1[MACADRR_BYTE_LEN];
u8 addr2[MACADRR_BYTE_LEN];
u8 addr3[MACADRR_BYTE_LEN];
u16 seq_ctrl; // more endians!
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
// TX TFD with 32 byte MAC Header
struct tx_tfd_32 {
struct machdr32 mchdr; // 32
u32 uivplaceholder[2]; // 8
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
// TX TFD with 30 byte MAC Header
struct tx_tfd_30 {
struct machdr30 mchdr; // 30
u8 reserved[2]; // 2
u32 uivplaceholder[2]; // 8
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
// tx tfd with 26 byte mac header
struct tx_tfd_26 {
struct machdr26 mchdr; // 26
u8 reserved1[2]; // 2
u32 uivplaceholder[2]; // 8
u8 reserved2[4]; // 4
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
// tx tfd with 24 byte mac header
struct tx_tfd_24 {
struct machdr24 mchdr; // 24
u32 uivplaceholder[2]; // 8
u8 reserved[8]; // 8
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
#define DCT_WEP_KEY_FIELD_LENGTH 16
struct tfd_command {
2005-03-25 13:31:53 -05:00
u8 index;
u8 length;
u16 reserved;
u8 payload[0];
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
struct tfd_data {
/* Header */
u32 work_area_ptr;
u8 station_number; /* 0 for BSS */
2005-03-25 13:31:53 -05:00
u8 reserved1;
u16 reserved2;
/* Tx Parameters */
u8 cmd_id;
u8 seq_num;
u16 len;
2005-03-25 13:31:53 -05:00
u8 priority;
u8 tx_flags;
u8 tx_flags_ext;
u8 key_index;
u8 wepkey[DCT_WEP_KEY_FIELD_LENGTH];
u8 rate;
u8 antenna;
u16 next_packet_duration;
u16 next_frag_len;
u16 back_off_counter; //////txop;
2005-03-25 13:31:53 -05:00
u8 retrylimit;
u16 cwcurrent;
2005-03-25 13:31:53 -05:00
u8 reserved3;
/* 802.11 MAC Header */
union {
2005-03-25 13:31:53 -05:00
struct tx_tfd_24 tfd_24;
struct tx_tfd_26 tfd_26;
struct tx_tfd_30 tfd_30;
struct tx_tfd_32 tfd_32;
} tfd;
/* Payload DMA info */
u32 num_chunks;
u32 chunk_ptr[NUM_TFD_CHUNKS];
u16 chunk_len[NUM_TFD_CHUNKS];
} __attribute__ ((packed));
struct txrx_control_flags {
2005-03-25 13:31:53 -05:00
u8 message_type;
u8 rx_seq_num;
u8 control_bits;
u8 reserved;
} __attribute__ ((packed));
#define TFD_SIZE 128
#define TFD_CMD_IMMEDIATE_PAYLOAD_LENGTH (TFD_SIZE - sizeof(struct txrx_control_flags))
struct tfd_frame {
2005-03-25 13:31:53 -05:00
struct txrx_control_flags control_flags;
union {
struct tfd_data data;
struct tfd_command cmd;
u8 raw[TFD_CMD_IMMEDIATE_PAYLOAD_LENGTH];
} u;
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
typedef void destructor_func(const void *);
2005-03-25 13:31:53 -05:00
/**
* Tx Queue for DMA. Queue consists of circular buffer of
* BD's and required locking structures.
*/
struct clx2_tx_queue {
struct clx2_queue q;
struct tfd_frame *bd;
2005-03-25 13:31:53 -05:00
struct ieee80211_txb **txb;
};
/*
* RX related structures and functions
*/
#define RX_FREE_BUFFERS 32
#define RX_LOW_WATERMARK 8
Catch ipw2200 up to equivelancy with v1.0.2 Removed unneeded parenthesis around numeric constant defines Added support for iwspy Put in fix for Ad-Hoc mode not passing through all packets (thanks to KKH) Put in fix for fragmentation not working for fragment sizes between 441-464 bytes (thanks to Mohamed Abbas) Fixed #592 problem of CONFIG_IEEE80211_WPA_MODULE not including WPA support into the driver -- fixed as a result of no longer limiting WPAs inclusion Fixed #594 problem with user rates mask causing lack of association if AP mandatory rate is masked out. We now add back in as a supported rate any mandatory rate. Fixed #597 kernel oops due to calling dev_kfree_skb on an skb multiple times. Added code to control LEDs that can be controlled through the wireless NIC (vs. non-wireless HW interfaces) -- this is currently disabled by default due to reports by some users of it hanging their laptop. Added some more debug messages around fragmentation logic Added locking around STATUS_HCMD_ACTIVE to prevent re-entry race conditions Moved ipw_adapter_restart to only execute on the priv->workqueue to keep keyboard errors from occuring during adapter restart Added CFG_BACKGROUND_SCAN to easily allow people to play with background scanning implementations Modified WPA logic to send WPA IE if one is set (vs. being based on wpa_enabled) Modified scan result logic to report WPA and RSN IEs if set (vs. being based on wpa_enabled) Fixed issues with endianess compatability between the host and wireless adapter (thanks to York Liu and Yi Zhu) Fixed problem with Ad-Hoc network creation causing a firmware error if a scan was actively running (thanks to Mohamed Abbas) Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 22:43:11 -04:00
#define SUP_RATE_11A_MAX_NUM_CHANNELS 8
#define SUP_RATE_11B_MAX_NUM_CHANNELS 4
#define SUP_RATE_11G_MAX_NUM_CHANNELS 12
2005-03-25 13:31:53 -05:00
// Used for passing to driver number of successes and failures per rate
struct rate_histogram {
2005-03-25 13:31:53 -05:00
union {
u32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
u32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
u32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
} success;
union {
u32 a[SUP_RATE_11A_MAX_NUM_CHANNELS];
u32 b[SUP_RATE_11B_MAX_NUM_CHANNELS];
u32 g[SUP_RATE_11G_MAX_NUM_CHANNELS];
} failed;
} __attribute__ ((packed));
/* statistics command response */
2005-03-25 13:31:53 -05:00
struct ipw_cmd_stats {
u8 cmd_id;
u8 seq_num;
u16 good_sfd;
u16 bad_plcp;
u16 wrong_bssid;
u16 valid_mpdu;
u16 bad_mac_header;
u16 reserved_frame_types;
u16 rx_ina;
u16 bad_crc32;
u16 invalid_cts;
u16 invalid_acks;
u16 long_distance_ina_fina;
2005-03-25 13:31:53 -05:00
u16 dsp_silence_unreachable;
u16 accumulated_rssi;
u16 rx_ovfl_frame_tossed;
2005-03-25 13:31:53 -05:00
u16 rssi_silence_threshold;
u16 rx_ovfl_frame_supplied;
u16 last_rx_frame_signal;
u16 last_rx_frame_noise;
u16 rx_autodetec_no_ofdm;
2005-03-25 13:31:53 -05:00
u16 rx_autodetec_no_barker;
u16 reserved;
} __attribute__ ((packed));
struct notif_channel_result {
u8 channel_num;
struct ipw_cmd_stats stats;
u8 uReserved;
} __attribute__ ((packed));
#define SCAN_COMPLETED_STATUS_COMPLETE 1
#define SCAN_COMPLETED_STATUS_ABORTED 2
2005-03-25 13:31:53 -05:00
struct notif_scan_complete {
u8 scan_type;
u8 num_channels;
u8 status;
u8 reserved;
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
struct notif_frag_length {
u16 frag_length;
u16 reserved;
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
struct notif_beacon_state {
u32 state;
u32 number;
} __attribute__ ((packed));
struct notif_tgi_tx_key {
u8 key_state;
u8 security_type;
u8 station_index;
u8 reserved;
} __attribute__ ((packed));
#define SILENCE_OVER_THRESH (1)
#define SILENCE_UNDER_THRESH (2)
2005-03-25 13:31:53 -05:00
struct notif_link_deterioration {
struct ipw_cmd_stats stats;
u8 rate;
u8 modulation;
struct rate_histogram histogram;
u8 silence_notification_type; /* SILENCE_OVER/UNDER_THRESH */
u16 silence_count;
2005-03-25 13:31:53 -05:00
} __attribute__ ((packed));
struct notif_association {
u8 state;
} __attribute__ ((packed));
struct notif_authenticate {
u8 state;
struct machdr24 addr;
u16 status;
} __attribute__ ((packed));
struct notif_calibration {
u8 data[104];
} __attribute__ ((packed));
struct notif_noise {
u32 value;
} __attribute__ ((packed));
struct ipw_rx_notification {
u8 reserved[8];
u8 subtype;
u8 flags;
u16 size;
union {
struct notif_association assoc;
struct notif_authenticate auth;
struct notif_channel_result channel_result;
struct notif_scan_complete scan_complete;
struct notif_frag_length frag_len;
struct notif_beacon_state beacon_state;
struct notif_tgi_tx_key tgi_tx_key;
struct notif_link_deterioration link_deterioration;
struct notif_calibration calibration;
struct notif_noise noise;
u8 raw[0];
} u;
} __attribute__ ((packed));
struct ipw_rx_frame {
u32 reserved1;
u8 parent_tsf[4]; // fw_use[0] is boolean for OUR_TSF_IS_GREATER
u8 received_channel; // The channel that this frame was received on.
// Note that for .11b this does not have to be
// the same as the channel that it was sent.
// Filled by LMAC
2005-03-25 13:31:53 -05:00
u8 frameStatus;
u8 rate;
u8 rssi;
u8 agc;
u8 rssi_dbm;
u16 signal;
u16 noise;
u8 antennaAndPhy;
u8 control; // control bit should be on in bg
u8 rtscts_rate; // rate of rts or cts (in rts cts sequence rate
// is identical)
u8 rtscts_seen; // 0x1 RTS seen ; 0x2 CTS seen
2005-03-25 13:31:53 -05:00
u16 length;
u8 data[0];
} __attribute__ ((packed));
2005-03-25 13:31:53 -05:00
struct ipw_rx_header {
u8 message_type;
u8 rx_seq_num;
u8 control_bits;
u8 reserved;
} __attribute__ ((packed));
struct ipw_rx_packet {
2005-03-25 13:31:53 -05:00
struct ipw_rx_header header;
union {
struct ipw_rx_frame frame;
struct ipw_rx_notification notification;
} u;
} __attribute__ ((packed));
#define IPW_RX_NOTIFICATION_SIZE sizeof(struct ipw_rx_header) + 12
#define IPW_RX_FRAME_SIZE (unsigned int)(sizeof(struct ipw_rx_header) + \
sizeof(struct ipw_rx_frame))
2005-03-25 13:31:53 -05:00
struct ipw_rx_mem_buffer {
dma_addr_t dma_addr;
struct sk_buff *skb;
struct list_head list;
}; /* Not transferred over network, so not __attribute__ ((packed)) */
2005-03-25 13:31:53 -05:00
struct ipw_rx_queue {
struct ipw_rx_mem_buffer pool[RX_QUEUE_SIZE + RX_FREE_BUFFERS];
struct ipw_rx_mem_buffer *queue[RX_QUEUE_SIZE];
u32 processed; /* Internal index to last handled Rx packet */
u32 read; /* Shared index to newest available Rx buffer */
u32 write; /* Shared index to oldest written Rx packet */
u32 free_count; /* Number of pre-allocated buffers in rx_free */
2005-03-25 13:31:53 -05:00
/* Each of these lists is used as a FIFO for ipw_rx_mem_buffers */
struct list_head rx_free; /* Own an SKBs */
struct list_head rx_used; /* No SKB allocated */
2005-03-25 13:31:53 -05:00
spinlock_t lock;
}; /* Not transferred over network, so not __attribute__ ((packed)) */
2005-03-25 13:31:53 -05:00
struct alive_command_responce {
u8 alive_command;
u8 sequence_number;
u16 software_revision;
u8 device_identifier;
u8 reserved1[5];
u16 reserved2;
u16 reserved3;
u16 clock_settle_time;
u16 powerup_settle_time;
u16 reserved4;
u8 time_stamp[5]; /* month, day, year, hours, minutes */
u8 ucode_valid;
} __attribute__ ((packed));
#define IPW_MAX_RATES 12
struct ipw_rates {
u8 num_rates;
u8 rates[IPW_MAX_RATES];
} __attribute__ ((packed));
struct command_block {
2005-03-25 13:31:53 -05:00
unsigned int control;
u32 source_addr;
u32 dest_addr;
unsigned int status;
} __attribute__ ((packed));
#define CB_NUMBER_OF_ELEMENTS_SMALL 64
struct fw_image_desc {
2005-03-25 13:31:53 -05:00
unsigned long last_cb_index;
unsigned long current_cb_index;
struct command_block cb_list[CB_NUMBER_OF_ELEMENTS_SMALL];
void *v_addr;
2005-03-25 13:31:53 -05:00
unsigned long p_addr;
unsigned long len;
};
struct ipw_sys_config {
2005-03-25 13:31:53 -05:00
u8 bt_coexistence;
u8 reserved1;
u8 answer_broadcast_ssid_probe;
u8 accept_all_data_frames;
u8 accept_non_directed_frames;
u8 exclude_unicast_unencrypted;
u8 disable_unicast_decryption;
u8 exclude_multicast_unencrypted;
u8 disable_multicast_decryption;
u8 antenna_diversity;
u8 pass_crc_to_host;
u8 dot11g_auto_detection;
u8 enable_cts_to_self;
u8 enable_multicast_filtering;
u8 bt_coexist_collision_thr;
u8 silence_threshold;
2005-03-25 13:31:53 -05:00
u8 accept_all_mgmt_bcpr;
[PATCH] ipw2200: Enable rtap interface for RF promiscuous mode while associated With this patch, a new promiscuous mode is enabled. If the module is loaded with the rtap_iface=1 module parameter, two interfaces will be created (instead of just one). The second interface is prefixed 'rtap' and provides received 802.11 frames on the current channel to user space in a radiotap header format. Example usage: % modprobe ipw2200 rtap_iface=1 % iwconfig eth1 essid MyNetwork % dhcpcd eth1 % tcpdump -i rtap0 If you do not specify 'rtap_iface=1' then the rtap interface will not be created and you will need to turn it on via: % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface You can filter out what type of information is passed to user space via the rtap_filter sysfs entry. Currently you can tell the driver to transmit just the headers (which will provide the RADIOTAP and IEEE 802.11 header but not the payload), to filter based on frame control type (Management, Control, or Data), and whether to report transmitted frames, received frames, or both. The transmit frame reporting is based on a patch by Stefan Rompf. Filters can be get and set via a sysfs interface. For example, set the filter to only send headers (0x7), don't report Tx'd frames (0x10), and don't report data frames (0x100): % echo 0x117 > /sys/bus/pci/drivers/ipw2200/*/rtap_filter All your packets are belong to us: % tethereal -n -i rtap0 Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-13 05:20:27 -04:00
u8 accept_all_mgmt_frames;
2005-03-25 13:31:53 -05:00
u8 pass_noise_stats_to_host;
u8 reserved3;
} __attribute__ ((packed));
struct ipw_multicast_addr {
2005-03-25 13:31:53 -05:00
u8 num_of_multicast_addresses;
u8 reserved[3];
u8 mac1[6];
u8 mac2[6];
u8 mac3[6];
u8 mac4[6];
} __attribute__ ((packed));
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define DCW_WEP_KEY_INDEX_MASK 0x03 /* bits [0:1] */
#define DCW_WEP_KEY_SEC_TYPE_MASK 0x30 /* bits [4:5] */
#define DCW_WEP_KEY_SEC_TYPE_WEP 0x00
#define DCW_WEP_KEY_SEC_TYPE_CCM 0x20
#define DCW_WEP_KEY_SEC_TYPE_TKIP 0x30
#define DCW_WEP_KEY_INVALID_SIZE 0x00 /* 0 = Invalid key */
#define DCW_WEP_KEY64Bit_SIZE 0x05 /* 64-bit encryption */
#define DCW_WEP_KEY128Bit_SIZE 0x0D /* 128-bit encryption */
#define DCW_CCM_KEY128Bit_SIZE 0x10 /* 128-bit key */
//#define DCW_WEP_KEY128BitIV_SIZE 0x10 /* 128-bit key and 128-bit IV */
struct ipw_wep_key {
2005-03-25 13:31:53 -05:00
u8 cmd_id;
u8 seq_num;
u8 key_index;
u8 key_size;
u8 key[16];
} __attribute__ ((packed));
struct ipw_tgi_tx_key {
u8 key_id;
2005-03-25 13:31:53 -05:00
u8 security_type;
u8 station_index;
u8 flags;
u8 key[16];
u32 tx_counter[2];
} __attribute__ ((packed));
#define IPW_SCAN_CHANNELS 54
struct ipw_scan_request {
2005-03-25 13:31:53 -05:00
u8 scan_type;
u16 dwell_time;
u8 channels_list[IPW_SCAN_CHANNELS];
u8 channels_reserved[3];
} __attribute__ ((packed));
enum {
IPW_SCAN_PASSIVE_TILL_FIRST_BEACON_SCAN = 0,
IPW_SCAN_PASSIVE_FULL_DWELL_SCAN,
IPW_SCAN_ACTIVE_DIRECT_SCAN,
IPW_SCAN_ACTIVE_BROADCAST_SCAN,
IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN,
IPW_SCAN_TYPES
};
struct ipw_scan_request_ext {
2005-03-25 13:31:53 -05:00
u32 full_scan_index;
u8 channels_list[IPW_SCAN_CHANNELS];
u8 scan_type[IPW_SCAN_CHANNELS / 2];
u8 reserved;
u16 dwell_time[IPW_SCAN_TYPES];
} __attribute__ ((packed));
static inline u8 ipw_get_scan_type(struct ipw_scan_request_ext *scan, u8 index)
2005-03-25 13:31:53 -05:00
{
if (index % 2)
return scan->scan_type[index / 2] & 0x0F;
else
return (scan->scan_type[index / 2] & 0xF0) >> 4;
}
static inline void ipw_set_scan_type(struct ipw_scan_request_ext *scan,
2005-03-25 13:31:53 -05:00
u8 index, u8 scan_type)
{
if (index % 2)
scan->scan_type[index / 2] =
(scan->scan_type[index / 2] & 0xF0) | (scan_type & 0x0F);
2005-03-25 13:31:53 -05:00
else
scan->scan_type[index / 2] =
(scan->scan_type[index / 2] & 0x0F) |
((scan_type & 0x0F) << 4);
2005-03-25 13:31:53 -05:00
}
struct ipw_associate {
2005-03-25 13:31:53 -05:00
u8 channel;
u8 auth_type:4, auth_key:4;
2005-03-25 13:31:53 -05:00
u8 assoc_type;
u8 reserved;
u16 policy_support;
u8 preamble_length;
u8 ieee_mode;
u8 bssid[ETH_ALEN];
u32 assoc_tsf_msw;
u32 assoc_tsf_lsw;
u16 capability;
u16 listen_interval;
u16 beacon_interval;
u8 dest[ETH_ALEN];
u16 atim_window;
u8 smr;
u8 reserved1;
u16 reserved2;
} __attribute__ ((packed));
struct ipw_supported_rates {
2005-03-25 13:31:53 -05:00
u8 ieee_mode;
u8 num_rates;
u8 purpose;
u8 reserved;
u8 supported_rates[IPW_MAX_RATES];
} __attribute__ ((packed));
struct ipw_rts_threshold {
2005-03-25 13:31:53 -05:00
u16 rts_threshold;
u16 reserved;
} __attribute__ ((packed));
struct ipw_frag_threshold {
2005-03-25 13:31:53 -05:00
u16 frag_threshold;
u16 reserved;
} __attribute__ ((packed));
struct ipw_retry_limit {
2005-03-25 13:31:53 -05:00
u8 short_retry_limit;
u8 long_retry_limit;
u16 reserved;
} __attribute__ ((packed));
struct ipw_dino_config {
2005-03-25 13:31:53 -05:00
u32 dino_config_addr;
u16 dino_config_size;
u8 dino_response;
u8 reserved;
} __attribute__ ((packed));
struct ipw_aironet_info {
2005-03-25 13:31:53 -05:00
u8 id;
u8 length;
u16 reserved;
} __attribute__ ((packed));
struct ipw_rx_key {
2005-03-25 13:31:53 -05:00
u8 station_index;
u8 key_type;
u8 key_id;
u8 key_flag;
u8 key[16];
u8 station_address[6];
u8 key_index;
u8 reserved;
} __attribute__ ((packed));
struct ipw_country_channel_info {
2005-03-25 13:31:53 -05:00
u8 first_channel;
u8 no_channels;
s8 max_tx_power;
} __attribute__ ((packed));
struct ipw_country_info {
2005-03-25 13:31:53 -05:00
u8 id;
u8 length;
u8 country_str[3];
struct ipw_country_channel_info groups[7];
} __attribute__ ((packed));
struct ipw_channel_tx_power {
2005-03-25 13:31:53 -05:00
u8 channel_number;
s8 tx_power;
} __attribute__ ((packed));
#define SCAN_ASSOCIATED_INTERVAL (HZ)
#define SCAN_INTERVAL (HZ / 10)
#define MAX_A_CHANNELS 37
#define MAX_B_CHANNELS 14
struct ipw_tx_power {
2005-03-25 13:31:53 -05:00
u8 num_channels;
u8 ieee_mode;
struct ipw_channel_tx_power channels_tx_power[MAX_A_CHANNELS];
} __attribute__ ((packed));
struct ipw_rsn_capabilities {
2005-03-25 13:31:53 -05:00
u8 id;
u8 length;
u16 version;
} __attribute__ ((packed));
struct ipw_sensitivity_calib {
2005-03-25 13:31:53 -05:00
u16 beacon_rssi_raw;
u16 reserved;
} __attribute__ ((packed));
/**
* Host command structure.
*
2005-03-25 13:31:53 -05:00
* On input, the following fields should be filled:
* - cmd
* - len
* - status_len
* - param (if needed)
*
* On output,
2005-03-25 13:31:53 -05:00
* - \a status contains status;
* - \a param filled with status parameters.
*/
struct ipw_cmd {
u32 cmd; /**< Host command */
u32 status;/**< Status */
u32 status_len;
/**< How many 32 bit parameters in the status */
u32 len; /**< incoming parameters length, bytes */
2005-03-25 13:31:53 -05:00
/**
* command parameters.
* There should be enough space for incoming and
2005-03-25 13:31:53 -05:00
* outcoming parameters.
* Incoming parameters listed 1-st, followed by outcoming params.
* nParams=(len+3)/4+status_len
*/
u32 param[0];
2005-03-25 13:31:53 -05:00
} __attribute__ ((packed));
#define STATUS_HCMD_ACTIVE (1<<0) /**< host command in progress */
2005-03-25 13:31:53 -05:00
#define STATUS_INT_ENABLED (1<<1)
#define STATUS_RF_KILL_HW (1<<2)
#define STATUS_RF_KILL_SW (1<<3)
#define STATUS_RF_KILL_MASK (STATUS_RF_KILL_HW | STATUS_RF_KILL_SW)
#define STATUS_INIT (1<<5)
#define STATUS_AUTH (1<<6)
#define STATUS_ASSOCIATED (1<<7)
#define STATUS_STATE_MASK (STATUS_INIT | STATUS_AUTH | STATUS_ASSOCIATED)
#define STATUS_ASSOCIATING (1<<8)
#define STATUS_DISASSOCIATING (1<<9)
#define STATUS_ROAMING (1<<10)
#define STATUS_EXIT_PENDING (1<<11)
#define STATUS_DISASSOC_PENDING (1<<12)
#define STATUS_STATE_PENDING (1<<13)
#define STATUS_SCAN_PENDING (1<<20)
#define STATUS_SCANNING (1<<21)
#define STATUS_SCAN_ABORTING (1<<22)
#define STATUS_SCAN_FORCED (1<<23)
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.2 Removed unneeded parenthesis around numeric constant defines Added support for iwspy Put in fix for Ad-Hoc mode not passing through all packets (thanks to KKH) Put in fix for fragmentation not working for fragment sizes between 441-464 bytes (thanks to Mohamed Abbas) Fixed #592 problem of CONFIG_IEEE80211_WPA_MODULE not including WPA support into the driver -- fixed as a result of no longer limiting WPAs inclusion Fixed #594 problem with user rates mask causing lack of association if AP mandatory rate is masked out. We now add back in as a supported rate any mandatory rate. Fixed #597 kernel oops due to calling dev_kfree_skb on an skb multiple times. Added code to control LEDs that can be controlled through the wireless NIC (vs. non-wireless HW interfaces) -- this is currently disabled by default due to reports by some users of it hanging their laptop. Added some more debug messages around fragmentation logic Added locking around STATUS_HCMD_ACTIVE to prevent re-entry race conditions Moved ipw_adapter_restart to only execute on the priv->workqueue to keep keyboard errors from occuring during adapter restart Added CFG_BACKGROUND_SCAN to easily allow people to play with background scanning implementations Modified WPA logic to send WPA IE if one is set (vs. being based on wpa_enabled) Modified scan result logic to report WPA and RSN IEs if set (vs. being based on wpa_enabled) Fixed issues with endianess compatability between the host and wireless adapter (thanks to York Liu and Yi Zhu) Fixed problem with Ad-Hoc network creation causing a firmware error if a scan was actively running (thanks to Mohamed Abbas) Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 22:43:11 -04:00
#define STATUS_LED_LINK_ON (1<<24)
#define STATUS_LED_ACT_ON (1<<25)
2005-03-25 13:31:53 -05:00
#define STATUS_INDIRECT_BYTE (1<<28) /* sysfs entry configured for access */
#define STATUS_INDIRECT_DWORD (1<<29) /* sysfs entry configured for access */
#define STATUS_DIRECT_DWORD (1<<30) /* sysfs entry configured for access */
2005-03-25 13:31:53 -05:00
#define STATUS_SECURITY_UPDATED (1<<31) /* Security sync needed */
2005-03-25 13:31:53 -05:00
#define CFG_STATIC_CHANNEL (1<<0) /* Restrict assoc. to single channel */
#define CFG_STATIC_ESSID (1<<1) /* Restrict assoc. to single SSID */
#define CFG_STATIC_BSSID (1<<2) /* Restrict assoc. to single BSSID */
2005-03-25 13:31:53 -05:00
#define CFG_CUSTOM_MAC (1<<3)
#define CFG_PREAMBLE_LONG (1<<4)
2005-03-25 13:31:53 -05:00
#define CFG_ADHOC_PERSIST (1<<5)
#define CFG_ASSOCIATE (1<<6)
#define CFG_FIXED_RATE (1<<7)
#define CFG_ADHOC_CREATE (1<<8)
Catch ipw2200 up to equivelancy with v1.0.2 Removed unneeded parenthesis around numeric constant defines Added support for iwspy Put in fix for Ad-Hoc mode not passing through all packets (thanks to KKH) Put in fix for fragmentation not working for fragment sizes between 441-464 bytes (thanks to Mohamed Abbas) Fixed #592 problem of CONFIG_IEEE80211_WPA_MODULE not including WPA support into the driver -- fixed as a result of no longer limiting WPAs inclusion Fixed #594 problem with user rates mask causing lack of association if AP mandatory rate is masked out. We now add back in as a supported rate any mandatory rate. Fixed #597 kernel oops due to calling dev_kfree_skb on an skb multiple times. Added code to control LEDs that can be controlled through the wireless NIC (vs. non-wireless HW interfaces) -- this is currently disabled by default due to reports by some users of it hanging their laptop. Added some more debug messages around fragmentation logic Added locking around STATUS_HCMD_ACTIVE to prevent re-entry race conditions Moved ipw_adapter_restart to only execute on the priv->workqueue to keep keyboard errors from occuring during adapter restart Added CFG_BACKGROUND_SCAN to easily allow people to play with background scanning implementations Modified WPA logic to send WPA IE if one is set (vs. being based on wpa_enabled) Modified scan result logic to report WPA and RSN IEs if set (vs. being based on wpa_enabled) Fixed issues with endianess compatability between the host and wireless adapter (thanks to York Liu and Yi Zhu) Fixed problem with Ad-Hoc network creation causing a firmware error if a scan was actively running (thanks to Mohamed Abbas) Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 22:43:11 -04:00
#define CFG_NO_LED (1<<9)
#define CFG_BACKGROUND_SCAN (1<<10)
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define CFG_SPEED_SCAN (1<<11)
#define CFG_NET_STATS (1<<12)
2005-03-25 13:31:53 -05:00
#define CAP_SHARED_KEY (1<<0) /* Off = OPEN */
#define CAP_PRIVACY_ON (1<<1) /* Off = No privacy */
2005-03-25 13:31:53 -05:00
#define MAX_STATIONS 32
#define IPW_INVALID_STATION (0xff)
struct ipw_station_entry {
u8 mac_addr[ETH_ALEN];
u8 reserved;
u8 support_mode;
};
#define AVG_ENTRIES 8
struct average {
s16 entries[AVG_ENTRIES];
u8 pos;
u8 init;
s32 sum;
};
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define MAX_SPEED_SCAN 100
#define IPW_IBSS_MAC_HASH_SIZE 31
struct ipw_ibss_seq {
u8 mac[ETH_ALEN];
u16 seq_num;
u16 frag_num;
unsigned long packet_time;
struct list_head list;
};
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
struct ipw_error_elem {
u32 desc;
u32 time;
u32 blink1;
u32 blink2;
u32 link1;
u32 link2;
u32 data;
};
struct ipw_event {
u32 event;
u32 time;
u32 data;
} __attribute__ ((packed));
struct ipw_fw_error {
unsigned long jiffies;
u32 status;
u32 config;
u32 elem_len;
u32 log_len;
struct ipw_error_elem *elem;
struct ipw_event *log;
u8 payload[0];
} __attribute__ ((packed));
[PATCH] ipw2200: Enable rtap interface for RF promiscuous mode while associated With this patch, a new promiscuous mode is enabled. If the module is loaded with the rtap_iface=1 module parameter, two interfaces will be created (instead of just one). The second interface is prefixed 'rtap' and provides received 802.11 frames on the current channel to user space in a radiotap header format. Example usage: % modprobe ipw2200 rtap_iface=1 % iwconfig eth1 essid MyNetwork % dhcpcd eth1 % tcpdump -i rtap0 If you do not specify 'rtap_iface=1' then the rtap interface will not be created and you will need to turn it on via: % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface You can filter out what type of information is passed to user space via the rtap_filter sysfs entry. Currently you can tell the driver to transmit just the headers (which will provide the RADIOTAP and IEEE 802.11 header but not the payload), to filter based on frame control type (Management, Control, or Data), and whether to report transmitted frames, received frames, or both. The transmit frame reporting is based on a patch by Stefan Rompf. Filters can be get and set via a sysfs interface. For example, set the filter to only send headers (0x7), don't report Tx'd frames (0x10), and don't report data frames (0x100): % echo 0x117 > /sys/bus/pci/drivers/ipw2200/*/rtap_filter All your packets are belong to us: % tethereal -n -i rtap0 Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-13 05:20:27 -04:00
#ifdef CONFIG_IPW2200_PROMISCUOUS
enum ipw_prom_filter {
IPW_PROM_CTL_HEADER_ONLY = (1 << 0),
IPW_PROM_MGMT_HEADER_ONLY = (1 << 1),
IPW_PROM_DATA_HEADER_ONLY = (1 << 2),
IPW_PROM_ALL_HEADER_ONLY = 0xf, /* bits 0..3 */
IPW_PROM_NO_TX = (1 << 4),
IPW_PROM_NO_RX = (1 << 5),
IPW_PROM_NO_CTL = (1 << 6),
IPW_PROM_NO_MGMT = (1 << 7),
IPW_PROM_NO_DATA = (1 << 8),
};
struct ipw_priv;
struct ipw_prom_priv {
struct ipw_priv *priv;
struct ieee80211_device *ieee;
enum ipw_prom_filter filter;
int tx_packets;
int rx_packets;
};
#endif
#if defined(CONFIG_IPW2200_RADIOTAP) || defined(CONFIG_IPW2200_PROMISCUOUS)
[PATCH] ipw2200: Enable rtap interface for RF promiscuous mode while associated With this patch, a new promiscuous mode is enabled. If the module is loaded with the rtap_iface=1 module parameter, two interfaces will be created (instead of just one). The second interface is prefixed 'rtap' and provides received 802.11 frames on the current channel to user space in a radiotap header format. Example usage: % modprobe ipw2200 rtap_iface=1 % iwconfig eth1 essid MyNetwork % dhcpcd eth1 % tcpdump -i rtap0 If you do not specify 'rtap_iface=1' then the rtap interface will not be created and you will need to turn it on via: % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface You can filter out what type of information is passed to user space via the rtap_filter sysfs entry. Currently you can tell the driver to transmit just the headers (which will provide the RADIOTAP and IEEE 802.11 header but not the payload), to filter based on frame control type (Management, Control, or Data), and whether to report transmitted frames, received frames, or both. The transmit frame reporting is based on a patch by Stefan Rompf. Filters can be get and set via a sysfs interface. For example, set the filter to only send headers (0x7), don't report Tx'd frames (0x10), and don't report data frames (0x100): % echo 0x117 > /sys/bus/pci/drivers/ipw2200/*/rtap_filter All your packets are belong to us: % tethereal -n -i rtap0 Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-13 05:20:27 -04:00
/* Magic struct that slots into the radiotap header -- no reason
* to build this manually element by element, we can write it much
* more efficiently than we can parse it. ORDER MATTERS HERE
*
* When sent to us via the simulated Rx interface in sysfs, the entire
* structure is provided regardless of any bits unset.
*/
struct ipw_rt_hdr {
struct ieee80211_radiotap_header rt_hdr;
u64 rt_tsf; /* TSF */
u8 rt_flags; /* radiotap packet flags */
u8 rt_rate; /* rate in 500kb/s */
u16 rt_channel; /* channel in mhz */
u16 rt_chbitmask; /* channel bitfield */
s8 rt_dbmsignal; /* signal in dbM, kluged to signed */
s8 rt_dbmnoise;
u8 rt_antenna; /* antenna number */
u8 payload[0]; /* payload... */
} __attribute__ ((packed));
#endif
2005-03-25 13:31:53 -05:00
struct ipw_priv {
/* ieee device used by generic ieee processing code */
struct ieee80211_device *ieee;
spinlock_t lock;
spinlock_t irq_lock;
struct mutex mutex;
2005-03-25 13:31:53 -05:00
/* basic pci-network driver stuff */
struct pci_dev *pci_dev;
struct net_device *net_dev;
[PATCH] ipw2200: Enable rtap interface for RF promiscuous mode while associated With this patch, a new promiscuous mode is enabled. If the module is loaded with the rtap_iface=1 module parameter, two interfaces will be created (instead of just one). The second interface is prefixed 'rtap' and provides received 802.11 frames on the current channel to user space in a radiotap header format. Example usage: % modprobe ipw2200 rtap_iface=1 % iwconfig eth1 essid MyNetwork % dhcpcd eth1 % tcpdump -i rtap0 If you do not specify 'rtap_iface=1' then the rtap interface will not be created and you will need to turn it on via: % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface You can filter out what type of information is passed to user space via the rtap_filter sysfs entry. Currently you can tell the driver to transmit just the headers (which will provide the RADIOTAP and IEEE 802.11 header but not the payload), to filter based on frame control type (Management, Control, or Data), and whether to report transmitted frames, received frames, or both. The transmit frame reporting is based on a patch by Stefan Rompf. Filters can be get and set via a sysfs interface. For example, set the filter to only send headers (0x7), don't report Tx'd frames (0x10), and don't report data frames (0x100): % echo 0x117 > /sys/bus/pci/drivers/ipw2200/*/rtap_filter All your packets are belong to us: % tethereal -n -i rtap0 Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-13 05:20:27 -04:00
#ifdef CONFIG_IPW2200_PROMISCUOUS
/* Promiscuous mode */
struct ipw_prom_priv *prom_priv;
struct net_device *prom_net_dev;
#endif
2005-03-25 13:31:53 -05:00
/* pci hardware address support */
void __iomem *hw_base;
unsigned long hw_len;
2005-03-25 13:31:53 -05:00
struct fw_image_desc sram_desc;
/* result of ucode download */
struct alive_command_responce dino_alive;
wait_queue_head_t wait_command_queue;
wait_queue_head_t wait_state;
2005-03-25 13:31:53 -05:00
/* Rx and Tx DMA processing queues */
struct ipw_rx_queue *rxq;
struct clx2_tx_queue txq_cmd;
struct clx2_tx_queue txq[4];
u32 status;
u32 config;
u32 capability;
struct average average_missed_beacons;
s16 exp_avg_rssi;
s16 exp_avg_noise;
2005-03-25 13:31:53 -05:00
u32 port_type;
int rx_bufs_min; /**< minimum number of bufs in Rx queue */
int rx_pend_max; /**< maximum pending buffers for one IRQ */
u32 hcmd_seq; /**< sequence number for hcmd */
u32 disassociate_threshold;
u32 roaming_threshold;
2005-03-25 13:31:53 -05:00
struct ipw_associate assoc_request;
struct ieee80211_network *assoc_network;
unsigned long ts_scan_abort;
struct ipw_supported_rates rates;
struct ipw_rates phy[3]; /**< PHY restrictions, per band */
struct ipw_rates supp; /**< software defined */
struct ipw_rates extended; /**< use for corresp. IE, AP only */
2005-03-25 13:31:53 -05:00
struct notif_link_deterioration last_link_deterioration; /** for statistics */
struct ipw_cmd *hcmd; /**< host command currently executed */
2005-03-25 13:31:53 -05:00
wait_queue_head_t hcmd_wq; /**< host command waits for execution */
u32 tsf_bcn[2]; /**< TSF from latest beacon */
2005-03-25 13:31:53 -05:00
struct notif_calibration calib; /**< last calibration */
2005-03-25 13:31:53 -05:00
/* ordinal interface with firmware */
u32 table0_addr;
u32 table0_len;
u32 table1_addr;
u32 table1_len;
u32 table2_addr;
u32 table2_len;
/* context information */
u8 essid[IW_ESSID_MAX_SIZE];
u8 essid_len;
u8 nick[IW_ESSID_MAX_SIZE];
u16 rates_mask;
u8 channel;
struct ipw_sys_config sys_config;
u32 power_mode;
u8 bssid[ETH_ALEN];
2005-03-25 13:31:53 -05:00
u16 rts_threshold;
u8 mac_addr[ETH_ALEN];
u8 num_stations;
u8 stations[MAX_STATIONS][ETH_ALEN];
u8 short_retry_limit;
u8 long_retry_limit;
2005-03-25 13:31:53 -05:00
u32 notif_missed_beacons;
/* Statistics and counters normalized with each association */
u32 last_missed_beacons;
u32 last_tx_packets;
u32 last_rx_packets;
u32 last_tx_failures;
u32 last_rx_err;
u32 last_rate;
u32 missed_adhoc_beacons;
u32 missed_beacons;
u32 rx_packets;
u32 tx_packets;
u32 quality;
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
u8 speed_scan[MAX_SPEED_SCAN];
u8 speed_scan_pos;
u16 last_seq_num;
u16 last_frag_num;
unsigned long last_packet_time;
struct list_head ibss_mac_hash[IPW_IBSS_MAC_HASH_SIZE];
/* eeprom */
u8 eeprom[0x100]; /* 256 bytes of eeprom */
u8 country[4];
2005-03-25 13:31:53 -05:00
int eeprom_delay;
struct iw_statistics wstats;
2005-03-25 13:31:53 -05:00
struct iw_public_data wireless_data;
2005-03-25 13:31:53 -05:00
struct workqueue_struct *workqueue;
struct delayed_work adhoc_check;
2005-03-25 13:31:53 -05:00
struct work_struct associate;
struct work_struct disassociate;
struct work_struct system_config;
2005-03-25 13:31:53 -05:00
struct work_struct rx_replenish;
struct delayed_work request_scan;
struct work_struct request_passive_scan;
2005-03-25 13:31:53 -05:00
struct work_struct adapter_restart;
struct delayed_work rf_kill;
2005-03-25 13:31:53 -05:00
struct work_struct up;
struct work_struct down;
struct delayed_work gather_stats;
2005-03-25 13:31:53 -05:00
struct work_struct abort_scan;
struct work_struct roam;
struct delayed_work scan_check;
Catch ipw2200 up to equivelancy with v1.0.2 Removed unneeded parenthesis around numeric constant defines Added support for iwspy Put in fix for Ad-Hoc mode not passing through all packets (thanks to KKH) Put in fix for fragmentation not working for fragment sizes between 441-464 bytes (thanks to Mohamed Abbas) Fixed #592 problem of CONFIG_IEEE80211_WPA_MODULE not including WPA support into the driver -- fixed as a result of no longer limiting WPAs inclusion Fixed #594 problem with user rates mask causing lack of association if AP mandatory rate is masked out. We now add back in as a supported rate any mandatory rate. Fixed #597 kernel oops due to calling dev_kfree_skb on an skb multiple times. Added code to control LEDs that can be controlled through the wireless NIC (vs. non-wireless HW interfaces) -- this is currently disabled by default due to reports by some users of it hanging their laptop. Added some more debug messages around fragmentation logic Added locking around STATUS_HCMD_ACTIVE to prevent re-entry race conditions Moved ipw_adapter_restart to only execute on the priv->workqueue to keep keyboard errors from occuring during adapter restart Added CFG_BACKGROUND_SCAN to easily allow people to play with background scanning implementations Modified WPA logic to send WPA IE if one is set (vs. being based on wpa_enabled) Modified scan result logic to report WPA and RSN IEs if set (vs. being based on wpa_enabled) Fixed issues with endianess compatability between the host and wireless adapter (thanks to York Liu and Yi Zhu) Fixed problem with Ad-Hoc network creation causing a firmware error if a scan was actively running (thanks to Mohamed Abbas) Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 22:43:11 -04:00
struct work_struct link_up;
struct work_struct link_down;
2005-03-25 13:31:53 -05:00
struct tasklet_struct irq_tasklet;
Catch ipw2200 up to equivelancy with v1.0.2 Removed unneeded parenthesis around numeric constant defines Added support for iwspy Put in fix for Ad-Hoc mode not passing through all packets (thanks to KKH) Put in fix for fragmentation not working for fragment sizes between 441-464 bytes (thanks to Mohamed Abbas) Fixed #592 problem of CONFIG_IEEE80211_WPA_MODULE not including WPA support into the driver -- fixed as a result of no longer limiting WPAs inclusion Fixed #594 problem with user rates mask causing lack of association if AP mandatory rate is masked out. We now add back in as a supported rate any mandatory rate. Fixed #597 kernel oops due to calling dev_kfree_skb on an skb multiple times. Added code to control LEDs that can be controlled through the wireless NIC (vs. non-wireless HW interfaces) -- this is currently disabled by default due to reports by some users of it hanging their laptop. Added some more debug messages around fragmentation logic Added locking around STATUS_HCMD_ACTIVE to prevent re-entry race conditions Moved ipw_adapter_restart to only execute on the priv->workqueue to keep keyboard errors from occuring during adapter restart Added CFG_BACKGROUND_SCAN to easily allow people to play with background scanning implementations Modified WPA logic to send WPA IE if one is set (vs. being based on wpa_enabled) Modified scan result logic to report WPA and RSN IEs if set (vs. being based on wpa_enabled) Fixed issues with endianess compatability between the host and wireless adapter (thanks to York Liu and Yi Zhu) Fixed problem with Ad-Hoc network creation causing a firmware error if a scan was actively running (thanks to Mohamed Abbas) Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 22:43:11 -04:00
/* LED related variables and work_struct */
u8 nic_type;
u32 led_activity_on;
u32 led_activity_off;
u32 led_association_on;
u32 led_association_off;
u32 led_ofdm_on;
u32 led_ofdm_off;
struct delayed_work led_link_on;
struct delayed_work led_link_off;
struct delayed_work led_act_off;
struct work_struct merge_networks;
Catch ipw2200 up to equivelancy with v1.0.2 Removed unneeded parenthesis around numeric constant defines Added support for iwspy Put in fix for Ad-Hoc mode not passing through all packets (thanks to KKH) Put in fix for fragmentation not working for fragment sizes between 441-464 bytes (thanks to Mohamed Abbas) Fixed #592 problem of CONFIG_IEEE80211_WPA_MODULE not including WPA support into the driver -- fixed as a result of no longer limiting WPAs inclusion Fixed #594 problem with user rates mask causing lack of association if AP mandatory rate is masked out. We now add back in as a supported rate any mandatory rate. Fixed #597 kernel oops due to calling dev_kfree_skb on an skb multiple times. Added code to control LEDs that can be controlled through the wireless NIC (vs. non-wireless HW interfaces) -- this is currently disabled by default due to reports by some users of it hanging their laptop. Added some more debug messages around fragmentation logic Added locking around STATUS_HCMD_ACTIVE to prevent re-entry race conditions Moved ipw_adapter_restart to only execute on the priv->workqueue to keep keyboard errors from occuring during adapter restart Added CFG_BACKGROUND_SCAN to easily allow people to play with background scanning implementations Modified WPA logic to send WPA IE if one is set (vs. being based on wpa_enabled) Modified scan result logic to report WPA and RSN IEs if set (vs. being based on wpa_enabled) Fixed issues with endianess compatability between the host and wireless adapter (thanks to York Liu and Yi Zhu) Fixed problem with Ad-Hoc network creation causing a firmware error if a scan was actively running (thanks to Mohamed Abbas) Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 22:43:11 -04:00
struct ipw_cmd_log *cmdlog;
int cmdlog_len;
int cmdlog_pos;
2005-03-25 13:31:53 -05:00
#define IPW_2200BG 1
#define IPW_2915ABG 2
u8 adapter;
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
s8 tx_power;
2005-03-25 13:31:53 -05:00
#ifdef CONFIG_PM
2005-03-25 13:31:53 -05:00
u32 pm_state[16];
#endif
struct ipw_fw_error *error;
2005-03-25 13:31:53 -05:00
/* network state */
/* Used to pass the current INTA value from ISR to Tasklet */
u32 isr_inta;
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
/* QoS */
struct ipw_qos_info qos_data;
struct work_struct qos_activate;
/*********************************/
2005-03-25 13:31:53 -05:00
/* debugging info */
u32 indirect_dword;
u32 direct_dword;
u32 indirect_byte;
}; /*ipw_priv */
/* debug macros */
[PATCH] ipw2200: Enable rtap interface for RF promiscuous mode while associated With this patch, a new promiscuous mode is enabled. If the module is loaded with the rtap_iface=1 module parameter, two interfaces will be created (instead of just one). The second interface is prefixed 'rtap' and provides received 802.11 frames on the current channel to user space in a radiotap header format. Example usage: % modprobe ipw2200 rtap_iface=1 % iwconfig eth1 essid MyNetwork % dhcpcd eth1 % tcpdump -i rtap0 If you do not specify 'rtap_iface=1' then the rtap interface will not be created and you will need to turn it on via: % echo 1 > /sys/bus/pci/drivers/ipw2200/*/rtap_iface You can filter out what type of information is passed to user space via the rtap_filter sysfs entry. Currently you can tell the driver to transmit just the headers (which will provide the RADIOTAP and IEEE 802.11 header but not the payload), to filter based on frame control type (Management, Control, or Data), and whether to report transmitted frames, received frames, or both. The transmit frame reporting is based on a patch by Stefan Rompf. Filters can be get and set via a sysfs interface. For example, set the filter to only send headers (0x7), don't report Tx'd frames (0x10), and don't report data frames (0x100): % echo 0x117 > /sys/bus/pci/drivers/ipw2200/*/rtap_filter All your packets are belong to us: % tethereal -n -i rtap0 Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-04-13 05:20:27 -04:00
/* Debug and printf string expansion helpers for printing bitfields */
#define BIT_FMT8 "%c%c%c%c-%c%c%c%c"
#define BIT_FMT16 BIT_FMT8 ":" BIT_FMT8
#define BIT_FMT32 BIT_FMT16 " " BIT_FMT16
#define BITC(x,y) (((x>>y)&1)?'1':'0')
#define BIT_ARG8(x) \
BITC(x,7),BITC(x,6),BITC(x,5),BITC(x,4),\
BITC(x,3),BITC(x,2),BITC(x,1),BITC(x,0)
#define BIT_ARG16(x) \
BITC(x,15),BITC(x,14),BITC(x,13),BITC(x,12),\
BITC(x,11),BITC(x,10),BITC(x,9),BITC(x,8),\
BIT_ARG8(x)
#define BIT_ARG32(x) \
BITC(x,31),BITC(x,30),BITC(x,29),BITC(x,28),\
BITC(x,27),BITC(x,26),BITC(x,25),BITC(x,24),\
BITC(x,23),BITC(x,22),BITC(x,21),BITC(x,20),\
BITC(x,19),BITC(x,18),BITC(x,17),BITC(x,16),\
BIT_ARG16(x)
2005-03-25 13:31:53 -05:00
#define IPW_DEBUG(level, fmt, args...) \
do { if (ipw_debug_level & (level)) \
printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \
in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
#ifdef CONFIG_IPW2200_DEBUG
#define IPW_LL_DEBUG(level, fmt, args...) \
2005-03-25 13:31:53 -05:00
do { if (ipw_debug_level & (level)) \
printk(KERN_DEBUG DRV_NAME": %c %s " fmt, \
in_interrupt() ? 'I' : 'U', __FUNCTION__ , ## args); } while (0)
#else
#define IPW_LL_DEBUG(level, fmt, args...) do {} while (0)
#endif /* CONFIG_IPW2200_DEBUG */
2005-03-25 13:31:53 -05:00
/*
* To use the debug system;
*
* If you are defining a new debug classification, simply add it to the #define
* list here in the form of:
*
* #define IPW_DL_xxxx VALUE
*
2005-03-25 13:31:53 -05:00
* shifting value to the left one bit from the previous entry. xxxx should be
* the name of the classification (for example, WEP)
*
* You then need to either add a IPW_xxxx_DEBUG() macro definition for your
* classification, or use IPW_DEBUG(IPW_DL_xxxx, ...) whenever you want
* to send output to that classification.
*
* To add your debug level to the list of levels seen when you perform
*
* % cat /proc/net/ipw/debug_level
*
* you simply need to add your entry to the ipw_debug_levels array.
*
* If you do not see debug_level in /proc/net/ipw then you do not have
* CONFIG_IPW2200_DEBUG defined in your kernel configuration
2005-03-25 13:31:53 -05:00
*
*/
#define IPW_DL_ERROR (1<<0)
#define IPW_DL_WARNING (1<<1)
#define IPW_DL_INFO (1<<2)
#define IPW_DL_WX (1<<3)
#define IPW_DL_HOST_COMMAND (1<<5)
#define IPW_DL_STATE (1<<6)
#define IPW_DL_NOTIF (1<<10)
#define IPW_DL_SCAN (1<<11)
#define IPW_DL_ASSOC (1<<12)
#define IPW_DL_DROP (1<<13)
#define IPW_DL_IOCTL (1<<14)
#define IPW_DL_MANAGE (1<<15)
#define IPW_DL_FW (1<<16)
#define IPW_DL_RF_KILL (1<<17)
#define IPW_DL_FW_ERRORS (1<<18)
Catch ipw2200 up to equivelancy with v1.0.2 Removed unneeded parenthesis around numeric constant defines Added support for iwspy Put in fix for Ad-Hoc mode not passing through all packets (thanks to KKH) Put in fix for fragmentation not working for fragment sizes between 441-464 bytes (thanks to Mohamed Abbas) Fixed #592 problem of CONFIG_IEEE80211_WPA_MODULE not including WPA support into the driver -- fixed as a result of no longer limiting WPAs inclusion Fixed #594 problem with user rates mask causing lack of association if AP mandatory rate is masked out. We now add back in as a supported rate any mandatory rate. Fixed #597 kernel oops due to calling dev_kfree_skb on an skb multiple times. Added code to control LEDs that can be controlled through the wireless NIC (vs. non-wireless HW interfaces) -- this is currently disabled by default due to reports by some users of it hanging their laptop. Added some more debug messages around fragmentation logic Added locking around STATUS_HCMD_ACTIVE to prevent re-entry race conditions Moved ipw_adapter_restart to only execute on the priv->workqueue to keep keyboard errors from occuring during adapter restart Added CFG_BACKGROUND_SCAN to easily allow people to play with background scanning implementations Modified WPA logic to send WPA IE if one is set (vs. being based on wpa_enabled) Modified scan result logic to report WPA and RSN IEs if set (vs. being based on wpa_enabled) Fixed issues with endianess compatability between the host and wireless adapter (thanks to York Liu and Yi Zhu) Fixed problem with Ad-Hoc network creation causing a firmware error if a scan was actively running (thanks to Mohamed Abbas) Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 22:43:11 -04:00
#define IPW_DL_LED (1<<19)
2005-03-25 13:31:53 -05:00
#define IPW_DL_ORD (1<<20)
#define IPW_DL_FRAG (1<<21)
#define IPW_DL_WEP (1<<22)
#define IPW_DL_TX (1<<23)
#define IPW_DL_RX (1<<24)
#define IPW_DL_ISR (1<<25)
#define IPW_DL_FW_INFO (1<<26)
#define IPW_DL_IO (1<<27)
#define IPW_DL_TRACE (1<<28)
#define IPW_DL_STATS (1<<29)
#define IPW_DL_MERGE (1<<30)
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_DL_QOS (1<<31)
2005-03-25 13:31:53 -05:00
#define IPW_ERROR(f, a...) printk(KERN_ERR DRV_NAME ": " f, ## a)
#define IPW_WARNING(f, a...) printk(KERN_WARNING DRV_NAME ": " f, ## a)
#define IPW_DEBUG_INFO(f, a...) IPW_DEBUG(IPW_DL_INFO, f, ## a)
#define IPW_DEBUG_WX(f, a...) IPW_DEBUG(IPW_DL_WX, f, ## a)
#define IPW_DEBUG_SCAN(f, a...) IPW_DEBUG(IPW_DL_SCAN, f, ## a)
#define IPW_DEBUG_TRACE(f, a...) IPW_LL_DEBUG(IPW_DL_TRACE, f, ## a)
#define IPW_DEBUG_RX(f, a...) IPW_LL_DEBUG(IPW_DL_RX, f, ## a)
#define IPW_DEBUG_TX(f, a...) IPW_LL_DEBUG(IPW_DL_TX, f, ## a)
#define IPW_DEBUG_ISR(f, a...) IPW_LL_DEBUG(IPW_DL_ISR, f, ## a)
2005-03-25 13:31:53 -05:00
#define IPW_DEBUG_MANAGEMENT(f, a...) IPW_DEBUG(IPW_DL_MANAGE, f, ## a)
#define IPW_DEBUG_LED(f, a...) IPW_LL_DEBUG(IPW_DL_LED, f, ## a)
#define IPW_DEBUG_WEP(f, a...) IPW_LL_DEBUG(IPW_DL_WEP, f, ## a)
#define IPW_DEBUG_HC(f, a...) IPW_LL_DEBUG(IPW_DL_HOST_COMMAND, f, ## a)
#define IPW_DEBUG_FRAG(f, a...) IPW_LL_DEBUG(IPW_DL_FRAG, f, ## a)
#define IPW_DEBUG_FW(f, a...) IPW_LL_DEBUG(IPW_DL_FW, f, ## a)
2005-03-25 13:31:53 -05:00
#define IPW_DEBUG_RF_KILL(f, a...) IPW_DEBUG(IPW_DL_RF_KILL, f, ## a)
#define IPW_DEBUG_DROP(f, a...) IPW_DEBUG(IPW_DL_DROP, f, ## a)
#define IPW_DEBUG_IO(f, a...) IPW_LL_DEBUG(IPW_DL_IO, f, ## a)
#define IPW_DEBUG_ORD(f, a...) IPW_LL_DEBUG(IPW_DL_ORD, f, ## a)
#define IPW_DEBUG_FW_INFO(f, a...) IPW_LL_DEBUG(IPW_DL_FW_INFO, f, ## a)
2005-03-25 13:31:53 -05:00
#define IPW_DEBUG_NOTIF(f, a...) IPW_DEBUG(IPW_DL_NOTIF, f, ## a)
#define IPW_DEBUG_STATE(f, a...) IPW_DEBUG(IPW_DL_STATE | IPW_DL_ASSOC | IPW_DL_INFO, f, ## a)
#define IPW_DEBUG_ASSOC(f, a...) IPW_DEBUG(IPW_DL_ASSOC | IPW_DL_INFO, f, ## a)
#define IPW_DEBUG_STATS(f, a...) IPW_LL_DEBUG(IPW_DL_STATS, f, ## a)
#define IPW_DEBUG_MERGE(f, a...) IPW_LL_DEBUG(IPW_DL_MERGE, f, ## a)
#define IPW_DEBUG_QOS(f, a...) IPW_LL_DEBUG(IPW_DL_QOS, f, ## a)
2005-03-25 13:31:53 -05:00
#include <linux/ctype.h>
/*
* Register bit definitions
*/
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_INTA_RW 0x00000008
#define IPW_INTA_MASK_R 0x0000000C
#define IPW_INDIRECT_ADDR 0x00000010
#define IPW_INDIRECT_DATA 0x00000014
#define IPW_AUTOINC_ADDR 0x00000018
#define IPW_AUTOINC_DATA 0x0000001C
#define IPW_RESET_REG 0x00000020
#define IPW_GP_CNTRL_RW 0x00000024
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_READ_INT_REGISTER 0xFF4
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_GP_CNTRL_BIT_INIT_DONE 0x00000004
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_REGISTER_DOMAIN1_END 0x00001000
#define IPW_SRAM_READ_INT_REGISTER 0x00000ff4
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_SHARED_LOWER_BOUND 0x00000200
#define IPW_INTERRUPT_AREA_LOWER_BOUND 0x00000f80
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_NIC_SRAM_LOWER_BOUND 0x00000000
#define IPW_NIC_SRAM_UPPER_BOUND 0x00030000
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_BIT_INT_HOST_SRAM_READ_INT_REGISTER (1 << 29)
#define IPW_GP_CNTRL_BIT_CLOCK_READY 0x00000001
#define IPW_GP_CNTRL_BIT_HOST_ALLOWS_STANDBY 0x00000002
2005-03-25 13:31:53 -05:00
/*
* RESET Register Bit Indexes
*/
#define CBD_RESET_REG_PRINCETON_RESET (1<<0)
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_START_STANDBY (1<<2)
#define IPW_ACTIVITY_LED (1<<4)
#define IPW_ASSOCIATED_LED (1<<5)
#define IPW_OFDM_LED (1<<6)
#define IPW_RESET_REG_SW_RESET (1<<7)
#define IPW_RESET_REG_MASTER_DISABLED (1<<8)
#define IPW_RESET_REG_STOP_MASTER (1<<9)
#define IPW_GATE_ODMA (1<<25)
#define IPW_GATE_IDMA (1<<26)
#define IPW_ARC_KESHET_CONFIG (1<<27)
#define IPW_GATE_ADMA (1<<29)
#define IPW_CSR_CIS_UPPER_BOUND 0x00000200
#define IPW_DOMAIN_0_END 0x1000
2005-03-25 13:31:53 -05:00
#define CLX_MEM_BAR_SIZE 0x1000
/* Dino/baseband control registers bits */
#define DINO_ENABLE_SYSTEM 0x80 /* 1 = baseband processor on, 0 = reset */
#define DINO_ENABLE_CS 0x40 /* 1 = enable ucode load */
#define DINO_RXFIFO_DATA 0x01 /* 1 = data available */
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_BASEBAND_CONTROL_STATUS 0X00200000
#define IPW_BASEBAND_TX_FIFO_WRITE 0X00200004
#define IPW_BASEBAND_RX_FIFO_READ 0X00200004
#define IPW_BASEBAND_CONTROL_STORE 0X00200010
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_INTERNAL_CMD_EVENT 0X00300004
#define IPW_BASEBAND_POWER_DOWN 0x00000001
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_MEM_HALT_AND_RESET 0x003000e0
2005-03-25 13:31:53 -05:00
/* defgroup bits_halt_reset MEM_HALT_AND_RESET register bits */
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_BIT_HALT_RESET_ON 0x80000000
#define IPW_BIT_HALT_RESET_OFF 0x00000000
2005-03-25 13:31:53 -05:00
#define CB_LAST_VALID 0x20000000
#define CB_INT_ENABLED 0x40000000
#define CB_VALID 0x80000000
#define CB_SRC_LE 0x08000000
#define CB_DEST_LE 0x04000000
#define CB_SRC_AUTOINC 0x00800000
#define CB_SRC_IO_GATED 0x00400000
#define CB_DEST_AUTOINC 0x00080000
#define CB_SRC_SIZE_LONG 0x00200000
#define CB_DEST_SIZE_LONG 0x00020000
/* DMA DEFINES */
#define DMA_CONTROL_SMALL_CB_CONST_VALUE 0x00540000
#define DMA_CB_STOP_AND_ABORT 0x00000C00
#define DMA_CB_START 0x00000100
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_SHARED_SRAM_SIZE 0x00030000
#define IPW_SHARED_SRAM_DMA_CONTROL 0x00027000
2005-03-25 13:31:53 -05:00
#define CB_MAX_LENGTH 0x1FFF
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_HOST_EEPROM_DATA_SRAM_SIZE 0xA18
#define IPW_EEPROM_IMAGE_SIZE 0x100
2005-03-25 13:31:53 -05:00
/* DMA defs */
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_DMA_I_CURRENT_CB 0x003000D0
#define IPW_DMA_O_CURRENT_CB 0x003000D4
#define IPW_DMA_I_DMA_CONTROL 0x003000A4
#define IPW_DMA_I_CB_BASE 0x003000A0
#define IPW_TX_CMD_QUEUE_BD_BASE 0x00000200
#define IPW_TX_CMD_QUEUE_BD_SIZE 0x00000204
#define IPW_TX_QUEUE_0_BD_BASE 0x00000208
#define IPW_TX_QUEUE_0_BD_SIZE (0x0000020C)
#define IPW_TX_QUEUE_1_BD_BASE 0x00000210
#define IPW_TX_QUEUE_1_BD_SIZE 0x00000214
#define IPW_TX_QUEUE_2_BD_BASE 0x00000218
#define IPW_TX_QUEUE_2_BD_SIZE (0x0000021C)
#define IPW_TX_QUEUE_3_BD_BASE 0x00000220
#define IPW_TX_QUEUE_3_BD_SIZE 0x00000224
#define IPW_RX_BD_BASE 0x00000240
#define IPW_RX_BD_SIZE 0x00000244
#define IPW_RFDS_TABLE_LOWER 0x00000500
#define IPW_TX_CMD_QUEUE_READ_INDEX 0x00000280
#define IPW_TX_QUEUE_0_READ_INDEX 0x00000284
#define IPW_TX_QUEUE_1_READ_INDEX 0x00000288
#define IPW_TX_QUEUE_2_READ_INDEX (0x0000028C)
#define IPW_TX_QUEUE_3_READ_INDEX 0x00000290
#define IPW_RX_READ_INDEX (0x000002A0)
#define IPW_TX_CMD_QUEUE_WRITE_INDEX (0x00000F80)
#define IPW_TX_QUEUE_0_WRITE_INDEX (0x00000F84)
#define IPW_TX_QUEUE_1_WRITE_INDEX (0x00000F88)
#define IPW_TX_QUEUE_2_WRITE_INDEX (0x00000F8C)
#define IPW_TX_QUEUE_3_WRITE_INDEX (0x00000F90)
#define IPW_RX_WRITE_INDEX (0x00000FA0)
2005-03-25 13:31:53 -05:00
/*
* EEPROM Related Definitions
*/
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_EEPROM_DATA_SRAM_ADDRESS (IPW_SHARED_LOWER_BOUND + 0x814)
#define IPW_EEPROM_DATA_SRAM_SIZE (IPW_SHARED_LOWER_BOUND + 0x818)
#define IPW_EEPROM_LOAD_DISABLE (IPW_SHARED_LOWER_BOUND + 0x81C)
#define IPW_EEPROM_DATA (IPW_SHARED_LOWER_BOUND + 0x820)
#define IPW_EEPROM_UPPER_ADDRESS (IPW_SHARED_LOWER_BOUND + 0x9E0)
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_STATION_TABLE_LOWER (IPW_SHARED_LOWER_BOUND + 0xA0C)
#define IPW_STATION_TABLE_UPPER (IPW_SHARED_LOWER_BOUND + 0xB0C)
#define IPW_REQUEST_ATIM (IPW_SHARED_LOWER_BOUND + 0xB0C)
#define IPW_ATIM_SENT (IPW_SHARED_LOWER_BOUND + 0xB10)
#define IPW_WHO_IS_AWAKE (IPW_SHARED_LOWER_BOUND + 0xB14)
#define IPW_DURING_ATIM_WINDOW (IPW_SHARED_LOWER_BOUND + 0xB18)
2005-03-25 13:31:53 -05:00
#define MSB 1
#define LSB 0
#define WORD_TO_BYTE(_word) ((_word) * sizeof(u16))
#define GET_EEPROM_ADDR(_wordoffset,_byteoffset) \
( WORD_TO_BYTE(_wordoffset) + (_byteoffset) )
/* EEPROM access by BYTE */
#define EEPROM_PME_CAPABILITY (GET_EEPROM_ADDR(0x09,MSB)) /* 1 byte */
#define EEPROM_MAC_ADDRESS (GET_EEPROM_ADDR(0x21,LSB)) /* 6 byte */
#define EEPROM_VERSION (GET_EEPROM_ADDR(0x24,MSB)) /* 1 byte */
#define EEPROM_NIC_TYPE (GET_EEPROM_ADDR(0x25,LSB)) /* 1 byte */
#define EEPROM_SKU_CAPABILITY (GET_EEPROM_ADDR(0x25,MSB)) /* 1 byte */
#define EEPROM_COUNTRY_CODE (GET_EEPROM_ADDR(0x26,LSB)) /* 3 bytes */
#define EEPROM_IBSS_CHANNELS_BG (GET_EEPROM_ADDR(0x28,LSB)) /* 2 bytes */
#define EEPROM_IBSS_CHANNELS_A (GET_EEPROM_ADDR(0x29,MSB)) /* 5 bytes */
#define EEPROM_BSS_CHANNELS_BG (GET_EEPROM_ADDR(0x2c,LSB)) /* 2 bytes */
#define EEPROM_HW_VERSION (GET_EEPROM_ADDR(0x72,LSB)) /* 2 bytes */
2005-03-25 13:31:53 -05:00
/* NIC type as found in the one byte EEPROM_NIC_TYPE offset */
Catch ipw2200 up to equivelancy with v1.0.2 Removed unneeded parenthesis around numeric constant defines Added support for iwspy Put in fix for Ad-Hoc mode not passing through all packets (thanks to KKH) Put in fix for fragmentation not working for fragment sizes between 441-464 bytes (thanks to Mohamed Abbas) Fixed #592 problem of CONFIG_IEEE80211_WPA_MODULE not including WPA support into the driver -- fixed as a result of no longer limiting WPAs inclusion Fixed #594 problem with user rates mask causing lack of association if AP mandatory rate is masked out. We now add back in as a supported rate any mandatory rate. Fixed #597 kernel oops due to calling dev_kfree_skb on an skb multiple times. Added code to control LEDs that can be controlled through the wireless NIC (vs. non-wireless HW interfaces) -- this is currently disabled by default due to reports by some users of it hanging their laptop. Added some more debug messages around fragmentation logic Added locking around STATUS_HCMD_ACTIVE to prevent re-entry race conditions Moved ipw_adapter_restart to only execute on the priv->workqueue to keep keyboard errors from occuring during adapter restart Added CFG_BACKGROUND_SCAN to easily allow people to play with background scanning implementations Modified WPA logic to send WPA IE if one is set (vs. being based on wpa_enabled) Modified scan result logic to report WPA and RSN IEs if set (vs. being based on wpa_enabled) Fixed issues with endianess compatability between the host and wireless adapter (thanks to York Liu and Yi Zhu) Fixed problem with Ad-Hoc network creation causing a firmware error if a scan was actively running (thanks to Mohamed Abbas) Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 22:43:11 -04:00
#define EEPROM_NIC_TYPE_0 0
#define EEPROM_NIC_TYPE_1 1
#define EEPROM_NIC_TYPE_2 2
#define EEPROM_NIC_TYPE_3 3
#define EEPROM_NIC_TYPE_4 4
2005-03-25 13:31:53 -05:00
/* Bluetooth Coexistence capabilities as found in EEPROM_SKU_CAPABILITY */
#define EEPROM_SKU_CAP_BT_CHANNEL_SIG 0x01 /* we can tell BT our channel # */
#define EEPROM_SKU_CAP_BT_PRIORITY 0x02 /* BT can take priority over us */
#define EEPROM_SKU_CAP_BT_OOB 0x04 /* we can signal BT out-of-band */
2005-03-25 13:31:53 -05:00
#define FW_MEM_REG_LOWER_BOUND 0x00300000
#define FW_MEM_REG_EEPROM_ACCESS (FW_MEM_REG_LOWER_BOUND + 0x40)
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_EVENT_REG (FW_MEM_REG_LOWER_BOUND + 0x04)
2005-03-25 13:31:53 -05:00
#define EEPROM_BIT_SK (1<<0)
#define EEPROM_BIT_CS (1<<1)
#define EEPROM_BIT_DI (1<<2)
#define EEPROM_BIT_DO (1<<4)
#define EEPROM_CMD_READ 0x2
/* Interrupts masks */
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_INTA_NONE 0x00000000
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_INTA_BIT_RX_TRANSFER 0x00000002
#define IPW_INTA_BIT_STATUS_CHANGE 0x00000010
#define IPW_INTA_BIT_BEACON_PERIOD_EXPIRED 0x00000020
2005-03-25 13:31:53 -05:00
//Inta Bits for CF
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_INTA_BIT_TX_CMD_QUEUE 0x00000800
#define IPW_INTA_BIT_TX_QUEUE_1 0x00001000
#define IPW_INTA_BIT_TX_QUEUE_2 0x00002000
#define IPW_INTA_BIT_TX_QUEUE_3 0x00004000
#define IPW_INTA_BIT_TX_QUEUE_4 0x00008000
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_INTA_BIT_SLAVE_MODE_HOST_CMD_DONE 0x00010000
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_INTA_BIT_PREPARE_FOR_POWER_DOWN 0x00100000
#define IPW_INTA_BIT_POWER_DOWN 0x00200000
2005-03-25 13:31:53 -05:00
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_INTA_BIT_FW_INITIALIZATION_DONE 0x01000000
#define IPW_INTA_BIT_FW_CARD_DISABLE_PHY_OFF_DONE 0x02000000
#define IPW_INTA_BIT_RF_KILL_DONE 0x04000000
#define IPW_INTA_BIT_FATAL_ERROR 0x40000000
#define IPW_INTA_BIT_PARITY_ERROR 0x80000000
2005-03-25 13:31:53 -05:00
/* Interrupts enabled at init time. */
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_INTA_MASK_ALL \
(IPW_INTA_BIT_TX_QUEUE_1 | \
IPW_INTA_BIT_TX_QUEUE_2 | \
IPW_INTA_BIT_TX_QUEUE_3 | \
IPW_INTA_BIT_TX_QUEUE_4 | \
IPW_INTA_BIT_TX_CMD_QUEUE | \
IPW_INTA_BIT_RX_TRANSFER | \
IPW_INTA_BIT_FATAL_ERROR | \
IPW_INTA_BIT_PARITY_ERROR | \
IPW_INTA_BIT_STATUS_CHANGE | \
IPW_INTA_BIT_FW_INITIALIZATION_DONE | \
IPW_INTA_BIT_BEACON_PERIOD_EXPIRED | \
IPW_INTA_BIT_SLAVE_MODE_HOST_CMD_DONE | \
IPW_INTA_BIT_PREPARE_FOR_POWER_DOWN | \
IPW_INTA_BIT_POWER_DOWN | \
IPW_INTA_BIT_RF_KILL_DONE )
2005-03-25 13:31:53 -05:00
/* FW event log definitions */
#define EVENT_ELEM_SIZE (3 * sizeof(u32))
#define EVENT_START_OFFSET (1 * sizeof(u32) + 2 * sizeof(u16))
/* FW error log definitions */
#define ERROR_ELEM_SIZE (7 * sizeof(u32))
#define ERROR_START_OFFSET (1 * sizeof(u32))
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
/* TX power level (dbm) */
#define IPW_TX_POWER_MIN -12
#define IPW_TX_POWER_MAX 20
#define IPW_TX_POWER_DEFAULT IPW_TX_POWER_MAX
2005-03-25 13:31:53 -05:00
enum {
IPW_FW_ERROR_OK = 0,
IPW_FW_ERROR_FAIL,
IPW_FW_ERROR_MEMORY_UNDERFLOW,
IPW_FW_ERROR_MEMORY_OVERFLOW,
IPW_FW_ERROR_BAD_PARAM,
IPW_FW_ERROR_BAD_CHECKSUM,
IPW_FW_ERROR_NMI_INTERRUPT,
IPW_FW_ERROR_BAD_DATABASE,
IPW_FW_ERROR_ALLOC_FAIL,
IPW_FW_ERROR_DMA_UNDERRUN,
IPW_FW_ERROR_DMA_STATUS,
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
IPW_FW_ERROR_DINO_ERROR,
IPW_FW_ERROR_EEPROM_ERROR,
2005-03-25 13:31:53 -05:00
IPW_FW_ERROR_SYSASSERT,
IPW_FW_ERROR_FATAL_ERROR
};
#define AUTH_OPEN 0
#define AUTH_SHARED_KEY 1
#define AUTH_LEAP 2
#define AUTH_IGNORE 3
2005-03-25 13:31:53 -05:00
#define HC_ASSOCIATE 0
#define HC_REASSOCIATE 1
#define HC_DISASSOCIATE 2
#define HC_IBSS_START 3
#define HC_IBSS_RECONF 4
#define HC_DISASSOC_QUIET 5
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define HC_QOS_SUPPORT_ASSOC 0x01
2005-03-25 13:31:53 -05:00
#define IPW_RATE_CAPABILITIES 1
#define IPW_RATE_CONNECT 0
/*
* Rate values and masks
2005-03-25 13:31:53 -05:00
*/
#define IPW_TX_RATE_1MB 0x0A
#define IPW_TX_RATE_2MB 0x14
#define IPW_TX_RATE_5MB 0x37
#define IPW_TX_RATE_6MB 0x0D
#define IPW_TX_RATE_9MB 0x0F
#define IPW_TX_RATE_11MB 0x6E
2005-03-25 13:31:53 -05:00
#define IPW_TX_RATE_12MB 0x05
#define IPW_TX_RATE_18MB 0x07
#define IPW_TX_RATE_24MB 0x09
#define IPW_TX_RATE_36MB 0x0B
#define IPW_TX_RATE_48MB 0x01
#define IPW_TX_RATE_54MB 0x03
#define IPW_ORD_TABLE_ID_MASK 0x0000FF00
#define IPW_ORD_TABLE_VALUE_MASK 0x000000FF
#define IPW_ORD_TABLE_0_MASK 0x0000F000
#define IPW_ORD_TABLE_1_MASK 0x0000F100
#define IPW_ORD_TABLE_2_MASK 0x0000F200
#define IPW_ORD_TABLE_3_MASK 0x0000F300
#define IPW_ORD_TABLE_4_MASK 0x0000F400
#define IPW_ORD_TABLE_5_MASK 0x0000F500
#define IPW_ORD_TABLE_6_MASK 0x0000F600
#define IPW_ORD_TABLE_7_MASK 0x0000F700
2005-03-25 13:31:53 -05:00
/*
* Table 0 Entries (all entries are 32 bits)
*/
enum {
2005-03-25 13:31:53 -05:00
IPW_ORD_STAT_TX_CURR_RATE = IPW_ORD_TABLE_0_MASK + 1,
IPW_ORD_STAT_FRAG_TRESHOLD,
IPW_ORD_STAT_RTS_THRESHOLD,
IPW_ORD_STAT_TX_HOST_REQUESTS,
IPW_ORD_STAT_TX_HOST_COMPLETE,
IPW_ORD_STAT_TX_DIR_DATA,
2005-03-25 13:31:53 -05:00
IPW_ORD_STAT_TX_DIR_DATA_B_1,
IPW_ORD_STAT_TX_DIR_DATA_B_2,
IPW_ORD_STAT_TX_DIR_DATA_B_5_5,
IPW_ORD_STAT_TX_DIR_DATA_B_11,
/* Hole */
IPW_ORD_STAT_TX_DIR_DATA_G_1 = IPW_ORD_TABLE_0_MASK + 19,
IPW_ORD_STAT_TX_DIR_DATA_G_2,
IPW_ORD_STAT_TX_DIR_DATA_G_5_5,
IPW_ORD_STAT_TX_DIR_DATA_G_6,
IPW_ORD_STAT_TX_DIR_DATA_G_9,
IPW_ORD_STAT_TX_DIR_DATA_G_11,
2005-03-25 13:31:53 -05:00
IPW_ORD_STAT_TX_DIR_DATA_G_12,
IPW_ORD_STAT_TX_DIR_DATA_G_18,
IPW_ORD_STAT_TX_DIR_DATA_G_24,
IPW_ORD_STAT_TX_DIR_DATA_G_36,
IPW_ORD_STAT_TX_DIR_DATA_G_48,
IPW_ORD_STAT_TX_DIR_DATA_G_54,
IPW_ORD_STAT_TX_NON_DIR_DATA,
2005-03-25 13:31:53 -05:00
IPW_ORD_STAT_TX_NON_DIR_DATA_B_1,
IPW_ORD_STAT_TX_NON_DIR_DATA_B_2,
IPW_ORD_STAT_TX_NON_DIR_DATA_B_5_5,
IPW_ORD_STAT_TX_NON_DIR_DATA_B_11,
2005-03-25 13:31:53 -05:00
/* Hole */
IPW_ORD_STAT_TX_NON_DIR_DATA_G_1 = IPW_ORD_TABLE_0_MASK + 44,
IPW_ORD_STAT_TX_NON_DIR_DATA_G_2,
IPW_ORD_STAT_TX_NON_DIR_DATA_G_5_5,
IPW_ORD_STAT_TX_NON_DIR_DATA_G_6,
IPW_ORD_STAT_TX_NON_DIR_DATA_G_9,
IPW_ORD_STAT_TX_NON_DIR_DATA_G_11,
2005-03-25 13:31:53 -05:00
IPW_ORD_STAT_TX_NON_DIR_DATA_G_12,
IPW_ORD_STAT_TX_NON_DIR_DATA_G_18,
IPW_ORD_STAT_TX_NON_DIR_DATA_G_24,
IPW_ORD_STAT_TX_NON_DIR_DATA_G_36,
IPW_ORD_STAT_TX_NON_DIR_DATA_G_48,
IPW_ORD_STAT_TX_NON_DIR_DATA_G_54,
IPW_ORD_STAT_TX_RETRY,
IPW_ORD_STAT_TX_FAILURE,
IPW_ORD_STAT_RX_ERR_CRC,
IPW_ORD_STAT_RX_ERR_ICV,
IPW_ORD_STAT_RX_NO_BUFFER,
IPW_ORD_STAT_FULL_SCANS,
IPW_ORD_STAT_PARTIAL_SCANS,
IPW_ORD_STAT_TGH_ABORTED_SCANS,
IPW_ORD_STAT_TX_TOTAL_BYTES,
2005-03-25 13:31:53 -05:00
IPW_ORD_STAT_CURR_RSSI_RAW,
IPW_ORD_STAT_RX_BEACON,
IPW_ORD_STAT_MISSED_BEACONS,
IPW_ORD_TABLE_0_LAST
};
2005-03-25 13:31:53 -05:00
#define IPW_RSSI_TO_DBM 112
/* Table 1 Entries
*/
enum {
IPW_ORD_TABLE_1_LAST = IPW_ORD_TABLE_1_MASK | 1,
};
/*
* Table 2 Entries
*
* FW_VERSION: 16 byte string
* FW_DATE: 16 byte string (only 14 bytes used)
* UCODE_VERSION: 4 byte version code
* UCODE_DATE: 5 bytes code code
* ADDAPTER_MAC: 6 byte MAC address
* RTC: 4 byte clock
*/
enum {
2005-03-25 13:31:53 -05:00
IPW_ORD_STAT_FW_VERSION = IPW_ORD_TABLE_2_MASK | 1,
IPW_ORD_STAT_FW_DATE,
2005-03-25 13:31:53 -05:00
IPW_ORD_STAT_UCODE_VERSION,
IPW_ORD_STAT_UCODE_DATE,
IPW_ORD_STAT_ADAPTER_MAC,
IPW_ORD_STAT_RTC,
IPW_ORD_TABLE_2_LAST
};
2005-03-25 13:31:53 -05:00
/* Table 3 */
enum {
IPW_ORD_STAT_TX_PACKET = IPW_ORD_TABLE_3_MASK | 0,
IPW_ORD_STAT_TX_PACKET_FAILURE,
IPW_ORD_STAT_TX_PACKET_SUCCESS,
IPW_ORD_STAT_TX_PACKET_ABORTED,
IPW_ORD_TABLE_3_LAST
};
/* Table 4 */
enum {
IPW_ORD_TABLE_4_LAST = IPW_ORD_TABLE_4_MASK
};
/* Table 5 */
enum {
IPW_ORD_STAT_AVAILABLE_AP_COUNT = IPW_ORD_TABLE_5_MASK,
IPW_ORD_STAT_AP_ASSNS,
IPW_ORD_STAT_ROAM,
IPW_ORD_STAT_ROAM_CAUSE_MISSED_BEACONS,
IPW_ORD_STAT_ROAM_CAUSE_UNASSOC,
IPW_ORD_STAT_ROAM_CAUSE_RSSI,
IPW_ORD_STAT_ROAM_CAUSE_LINK_QUALITY,
IPW_ORD_STAT_ROAM_CAUSE_AP_LOAD_BALANCE,
IPW_ORD_STAT_ROAM_CAUSE_AP_NO_TX,
IPW_ORD_STAT_LINK_UP,
IPW_ORD_STAT_LINK_DOWN,
IPW_ORD_ANTENNA_DIVERSITY,
IPW_ORD_CURR_FREQ,
IPW_ORD_TABLE_5_LAST
};
/* Table 6 */
enum {
IPW_ORD_COUNTRY_CODE = IPW_ORD_TABLE_6_MASK,
IPW_ORD_CURR_BSSID,
IPW_ORD_CURR_SSID,
IPW_ORD_TABLE_6_LAST
};
/* Table 7 */
enum {
IPW_ORD_STAT_PERCENT_MISSED_BEACONS = IPW_ORD_TABLE_7_MASK,
IPW_ORD_STAT_PERCENT_TX_RETRIES,
IPW_ORD_STAT_PERCENT_LINK_QUALITY,
IPW_ORD_STAT_CURR_RSSI_DBM,
IPW_ORD_TABLE_7_LAST
};
#define IPW_ERROR_LOG (IPW_SHARED_LOWER_BOUND + 0x410)
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_EVENT_LOG (IPW_SHARED_LOWER_BOUND + 0x414)
#define IPW_ORDINALS_TABLE_LOWER (IPW_SHARED_LOWER_BOUND + 0x500)
#define IPW_ORDINALS_TABLE_0 (IPW_SHARED_LOWER_BOUND + 0x180)
#define IPW_ORDINALS_TABLE_1 (IPW_SHARED_LOWER_BOUND + 0x184)
#define IPW_ORDINALS_TABLE_2 (IPW_SHARED_LOWER_BOUND + 0x188)
#define IPW_MEM_FIXED_OVERRIDE (IPW_SHARED_LOWER_BOUND + 0x41C)
2005-03-25 13:31:53 -05:00
struct ipw_fixed_rate {
u16 tx_rates;
u16 reserved;
} __attribute__ ((packed));
Catch ipw2200 up to equivelancy with v1.0.4 * Fixed #627 problem with open APs not working with wpa_supplicant * Fixed #632 problem with 'txpower auto' setting power incorrectly (thanks to Kai Groner) * Fixed #634 problem with 'iwconfig eth1 frag 0' hanging the shell * Fixed problem with adapter not fully powering off during suspend to RAM or when module unloaded. * Fixed #645 problem with turning fixed rates off not taking effect until you reload the driver * Fixed problem with firmware restart if wpa_supplicant was used to set a key that wasn't exactly 5 or 13 bytes in length. * Fixed #623 Added iwpriv sw_reset extension to reset sw parameters * Added managment frame export to user space with frame statistics * Fixed #652 Modified the driver to load the EEPROM data even if RF KILL is active during driver load * Global s:CX2_:IPW_:g to make code more consistent * Fixed #572 problem with setting txpower to auto * Fixed #656 problem with kernel oops if mode auto; modprobe -r ipw2200 * Added QoS (CONFIG_IPW_QOS) support. This is being actively developed but is the first step in getting WMM support into the driver and the kernel. * Fixed some race conditions with channel changes, association, and scan abort that could periodically cause a firmware restart. * Added some extensions to export scan and network statistics to user space (exposed through speed_scan and net_stats sysfs entries) * Fixed a few bugs in how monitor mode was supported (scan lists weren't quite right) * Updated the firmware requirement from 2.2 to 2.3 which supports monitor mode. Signed-off-by: James Ketrenos <jketreno@linux.intel.com>
2005-08-24 23:04:42 -04:00
#define IPW_INDIRECT_ADDR_MASK (~0x3ul)
2005-03-25 13:31:53 -05:00
struct host_cmd {
u8 cmd;
u8 len;
u16 reserved;
u32 *param;
2005-03-25 13:31:53 -05:00
} __attribute__ ((packed));
struct cmdlog_host_cmd {
u8 cmd;
u8 len;
u16 reserved;
char param[124];
} __attribute__ ((packed));
struct ipw_cmd_log {
unsigned long jiffies;
int retcode;
struct cmdlog_host_cmd cmd;
};
/* SysConfig command parameters ... */
/* bt_coexistence param */
#define CFG_BT_COEXISTENCE_SIGNAL_CHNL 0x01 /* tell BT our chnl # */
#define CFG_BT_COEXISTENCE_DEFER 0x02 /* defer our Tx if BT traffic */
#define CFG_BT_COEXISTENCE_KILL 0x04 /* kill our Tx if BT traffic */
#define CFG_BT_COEXISTENCE_WME_OVER_BT 0x08 /* multimedia extensions */
#define CFG_BT_COEXISTENCE_OOB 0x10 /* signal BT via out-of-band */
/* clear-to-send to self param */
#define CFG_CTS_TO_ITSELF_ENABLED_MIN 0x00
#define CFG_CTS_TO_ITSELF_ENABLED_MAX 0x01
2005-03-25 13:31:53 -05:00
#define CFG_CTS_TO_ITSELF_ENABLED_DEF CFG_CTS_TO_ITSELF_ENABLED_MIN
/* Antenna diversity param (h/w can select best antenna, based on signal) */
#define CFG_SYS_ANTENNA_BOTH 0x00 /* NIC selects best antenna */
#define CFG_SYS_ANTENNA_A 0x01 /* force antenna A */
#define CFG_SYS_ANTENNA_B 0x03 /* force antenna B */
#define CFG_SYS_ANTENNA_SLOW_DIV 0x02 /* consider background noise */
2005-03-25 13:31:53 -05:00
/*
* The definitions below were lifted off the ipw2100 driver, which only
2005-03-25 13:31:53 -05:00
* supports 'b' mode, so I'm sure these are not exactly correct.
*
2005-03-25 13:31:53 -05:00
* Somebody fix these!!
*/
#define REG_MIN_CHANNEL 0
#define REG_MAX_CHANNEL 14
#define REG_CHANNEL_MASK 0x00003FFF
#define IPW_IBSS_11B_DEFAULT_MASK 0x87ff
#define IPW_MAX_CONFIG_RETRIES 10
#endif /* __ipw2200_h__ */