lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
d19770e517
android_kernel_xiaomi_sm8350/include/asm-arm/irq.h

46 lines
860 B
C
Raw Normal View History

Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
#ifndef __ASM_ARM_IRQ_H
#define __ASM_ARM_IRQ_H
#include <asm/arch/irqs.h>
#ifndef irq_canonicalize
#define irq_canonicalize(i) (i)
#endif
#ifndef NR_IRQS
#define NR_IRQS 128
#endif
/*
* Use this value to indicate lack of interrupt
* capability
*/
#ifndef NO_IRQ
#define NO_IRQ ((unsigned int)(-1))
#endif
[PATCH] IRQ type flags Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 04:02:07 -05:00
/*
[ARM] 3692/1: ARM: coswitch irq handling to the generic implementation Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Switch the ARM irq core handling to the generic implementation. The ARM specific header files now contain mostly migration stubs and helper macros. Note that each machine type must be converted after this step seperately. This was seperated out from the patch for easier review. The main changes for the machine type code is the conversion of the type handlers to a 'type flow' and 'chip' model. This affects only the multiplex interrupt handlers. A conversion macro needs to be added to those implementations, which defines the data structure which is registered by the set_irq_chained_handler() macro. Some minor fixups of include files and the conversion of data structure access is necessary all over the place. The mostly macro based conversion was provided to allow an easy migration of the existing implementations. The code compiles on all defconfigs available in arch/arm/configs except those which were broken also before applying the conversion patches. The code has been boot and runtime tested on most ARM platforms. The results of an extensive testing and bugfixing series can be found at: http://www.linutronix.de/index.php?page=testing Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 17:30:09 -04:00
* Migration helpers
[PATCH] IRQ type flags Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 04:02:07 -05:00
*/
[ARM] 3692/1: ARM: coswitch irq handling to the generic implementation Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Switch the ARM irq core handling to the generic implementation. The ARM specific header files now contain mostly migration stubs and helper macros. Note that each machine type must be converted after this step seperately. This was seperated out from the patch for easier review. The main changes for the machine type code is the conversion of the type handlers to a 'type flow' and 'chip' model. This affects only the multiplex interrupt handlers. A conversion macro needs to be added to those implementations, which defines the data structure which is registered by the set_irq_chained_handler() macro. Some minor fixups of include files and the conversion of data structure access is necessary all over the place. The mostly macro based conversion was provided to allow an easy migration of the existing implementations. The code compiles on all defconfigs available in arch/arm/configs except those which were broken also before applying the conversion patches. The code has been boot and runtime tested on most ARM platforms. The results of an extensive testing and bugfixing series can be found at: http://www.linutronix.de/index.php?page=testing Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 17:30:09 -04:00
#define __IRQT_FALEDGE IRQ_TYPE_EDGE_FALLING
#define __IRQT_RISEDGE IRQ_TYPE_EDGE_RISING
#define __IRQT_LOWLVL IRQ_TYPE_LEVEL_LOW
#define __IRQT_HIGHLVL IRQ_TYPE_LEVEL_HIGH
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
#define IRQT_NOEDGE (0)
#define IRQT_RISING (__IRQT_RISEDGE)
#define IRQT_FALLING (__IRQT_FALEDGE)
#define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE)
#define IRQT_LOW (__IRQT_LOWLVL)
#define IRQT_HIGH (__IRQT_HIGHLVL)
[ARM] 3692/1: ARM: coswitch irq handling to the generic implementation Patch from Thomas Gleixner From: Thomas Gleixner <tglx@linutronix.de> Switch the ARM irq core handling to the generic implementation. The ARM specific header files now contain mostly migration stubs and helper macros. Note that each machine type must be converted after this step seperately. This was seperated out from the patch for easier review. The main changes for the machine type code is the conversion of the type handlers to a 'type flow' and 'chip' model. This affects only the multiplex interrupt handlers. A conversion macro needs to be added to those implementations, which defines the data structure which is registered by the set_irq_chained_handler() macro. Some minor fixups of include files and the conversion of data structure access is necessary all over the place. The mostly macro based conversion was provided to allow an easy migration of the existing implementations. The code compiles on all defconfigs available in arch/arm/configs except those which were broken also before applying the conversion patches. The code has been boot and runtime tested on most ARM platforms. The results of an extensive testing and bugfixing series can be found at: http://www.linutronix.de/index.php?page=testing Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-07-01 17:30:09 -04:00
#define IRQT_PROBE IRQ_TYPE_PROBE
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
[ARM] 4073/1: Prevent s3c24xx drivers from including asm/arch/hardware.h and asm/arch/irqs.h As reminded in http://lkml.org/lkml/2006/12/23/26, one should use asm/hardware.h and asm/irq.h but absent-minded devs like me tends to use asm/arch/hardware.h and/or asm/arch/irqs.h. This patch aims at preventing such things. In order to make it work, I had to modify asm-arm/irq.h too so that it can be included from assembly files. Also, as a side effect, I had to modify some headers who were using the asm/arch/hardware.h or asm/arch/irqs.h. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-27 16:56:44 -05:00
#ifndef __ASSEMBLY__
struct irqaction;
[ARM SMP] Add hotplug CPU infrastructure This patch adds the infrastructure to support hotplug CPU on ARM platforms. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-02 17:24:33 -05:00
extern void migrate_irqs(void);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-16 18:20:36 -04:00
#endif
[ARM] 4073/1: Prevent s3c24xx drivers from including asm/arch/hardware.h and asm/arch/irqs.h As reminded in http://lkml.org/lkml/2006/12/23/26, one should use asm/hardware.h and asm/irq.h but absent-minded devs like me tends to use asm/arch/hardware.h and/or asm/arch/irqs.h. This patch aims at preventing such things. In order to make it work, I had to modify asm-arm/irq.h too so that it can be included from assembly files. Also, as a side effect, I had to modify some headers who were using the asm/arch/hardware.h or asm/arch/irqs.h. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-12-27 16:56:44 -05:00
#endif
Reference in New Issue Copy Permalink