android_kernel_xiaomi_sm8350/arch/mips/kernel/irq_cpu.c

182 lines
4.6 KiB
C
Raw Normal View History

/*
* Copyright 2001 MontaVista Software Inc.
* Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
*
* Copyright (C) 2001 Ralf Baechle
* Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved.
* Author: Maciej W. Rozycki <macro@mips.com>
*
* This file define the irq handler for MIPS CPU interrupts.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/*
* Almost all MIPS CPUs define 8 interrupt sources. They are typically
* level triggered (i.e., cannot be cleared from CPU; must be cleared from
* device). The first two are software interrupts which we don't really
* use or support. The last one is usually the CPU timer interrupt if
* counter register is present or, for CPUs with an external FPU, by
* convention it's the FPU exception interrupt.
*
* Don't even think about using this on SMP. You have been warned.
*
* This file exports one global function:
* void mips_cpu_irq_init(int irq_base);
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <asm/irq_cpu.h>
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/system.h>
static int mips_cpu_irq_base;
static inline void unmask_mips_irq(unsigned int irq)
{
set_c0_status(0x100 << (irq - mips_cpu_irq_base));
irq_enable_hazard();
}
static inline void mask_mips_irq(unsigned int irq)
{
clear_c0_status(0x100 << (irq - mips_cpu_irq_base));
irq_disable_hazard();
}
static inline void mips_cpu_irq_enable(unsigned int irq)
{
unsigned long flags;
local_irq_save(flags);
unmask_mips_irq(irq);
back_to_back_c0_hazard();
local_irq_restore(flags);
}
static void mips_cpu_irq_disable(unsigned int irq)
{
unsigned long flags;
local_irq_save(flags);
mask_mips_irq(irq);
back_to_back_c0_hazard();
local_irq_restore(flags);
}
static unsigned int mips_cpu_irq_startup(unsigned int irq)
{
mips_cpu_irq_enable(irq);
return 0;
}
#define mips_cpu_irq_shutdown mips_cpu_irq_disable
/*
* While we ack the interrupt interrupts are disabled and thus we don't need
* to deal with concurrency issues. Same for mips_cpu_irq_end.
*/
static void mips_cpu_irq_ack(unsigned int irq)
{
mask_mips_irq(irq);
}
static void mips_cpu_irq_end(unsigned int irq)
{
if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
unmask_mips_irq(irq);
}
static hw_irq_controller mips_cpu_irq_controller = {
.typename = "MIPS",
.startup = mips_cpu_irq_startup,
.shutdown = mips_cpu_irq_shutdown,
.enable = mips_cpu_irq_enable,
.disable = mips_cpu_irq_disable,
.ack = mips_cpu_irq_ack,
.end = mips_cpu_irq_end,
};
/*
* Basically the same as above but taking care of all the MT stuff
*/
#define unmask_mips_mt_irq unmask_mips_irq
#define mask_mips_mt_irq mask_mips_irq
#define mips_mt_cpu_irq_enable mips_cpu_irq_enable
#define mips_mt_cpu_irq_disable mips_cpu_irq_disable
static unsigned int mips_mt_cpu_irq_startup(unsigned int irq)
{
unsigned int vpflags = dvpe();
clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
evpe(vpflags);
mips_mt_cpu_irq_enable(irq);
return 0;
}
#define mips_mt_cpu_irq_shutdown mips_mt_cpu_irq_disable
/*
* While we ack the interrupt interrupts are disabled and thus we don't need
* to deal with concurrency issues. Same for mips_cpu_irq_end.
*/
static void mips_mt_cpu_irq_ack(unsigned int irq)
{
unsigned int vpflags = dvpe();
clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
evpe(vpflags);
mask_mips_mt_irq(irq);
}
#define mips_mt_cpu_irq_end mips_cpu_irq_end
static hw_irq_controller mips_mt_cpu_irq_controller = {
.typename = "MIPS",
.startup = mips_mt_cpu_irq_startup,
.shutdown = mips_mt_cpu_irq_shutdown,
.enable = mips_mt_cpu_irq_enable,
.disable = mips_mt_cpu_irq_disable,
.ack = mips_mt_cpu_irq_ack,
.end = mips_mt_cpu_irq_end,
};
void __init mips_cpu_irq_init(int irq_base)
{
int i;
/* Mask interrupts. */
clear_c0_status(ST0_IM);
clear_c0_cause(CAUSEF_IP);
/*
* Only MT is using the software interrupts currently, so we just
* leave them uninitialized for other processors.
*/
if (cpu_has_mipsmt)
for (i = irq_base; i < irq_base + 2; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
[PATCH] genirq: rename desc->handler to desc->chip This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 05:24:36 -04:00
irq_desc[i].chip = &mips_mt_cpu_irq_controller;
}
for (i = irq_base + 2; i < irq_base + 8; i++) {
irq_desc[i].status = IRQ_DISABLED;
irq_desc[i].action = NULL;
irq_desc[i].depth = 1;
[PATCH] genirq: rename desc->handler to desc->chip This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-29 05:24:36 -04:00
irq_desc[i].chip = &mips_cpu_irq_controller;
}
mips_cpu_irq_base = irq_base;
}