2006-03-24 04:50:17 -05:00
|
|
|
/*
|
|
|
|
* Ethernet driver for the Atmel AT91RM9200 (Thunder)
|
|
|
|
*
|
|
|
|
* Copyright (C) 2003 SAN People (Pty) Ltd
|
|
|
|
*
|
|
|
|
* Based on an earlier Atmel EMAC macrocell driver by Atmel and Lineo Inc.
|
|
|
|
* Initial version by Rick Bronson 01/11/2003
|
|
|
|
*
|
|
|
|
* Intel LXT971A PHY support by Christopher Bahns & David Knickerbocker
|
|
|
|
* (Polaroid Corporation)
|
|
|
|
*
|
|
|
|
* Realtek RTL8201(B)L PHY support by Roman Avramenko <roman@imsystems.ru>
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU General Public License
|
|
|
|
* as published by the Free Software Foundation; either version
|
|
|
|
* 2 of the License, or (at your option) any later version.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/mii.h>
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/ethtool.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
|
|
|
|
|
|
#include <asm/arch/at91rm9200_emac.h>
|
|
|
|
#include <asm/arch/gpio.h>
|
|
|
|
#include <asm/arch/board.h>
|
|
|
|
|
|
|
|
#include "at91_ether.h"
|
|
|
|
|
|
|
|
#define DRV_NAME "at91_ether"
|
|
|
|
#define DRV_VERSION "1.0"
|
|
|
|
|
2006-06-20 05:50:23 -04:00
|
|
|
#define LINK_POLL_INTERVAL (HZ)
|
|
|
|
|
2006-03-24 04:50:17 -05:00
|
|
|
/* ..................................................................... */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Read from a EMAC register.
|
|
|
|
*/
|
|
|
|
static inline unsigned long at91_emac_read(unsigned int reg)
|
|
|
|
{
|
|
|
|
void __iomem *emac_base = (void __iomem *)AT91_VA_BASE_EMAC;
|
|
|
|
|
|
|
|
return __raw_readl(emac_base + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Write to a EMAC register.
|
|
|
|
*/
|
|
|
|
static inline void at91_emac_write(unsigned int reg, unsigned long value)
|
|
|
|
{
|
|
|
|
void __iomem *emac_base = (void __iomem *)AT91_VA_BASE_EMAC;
|
|
|
|
|
|
|
|
__raw_writel(value, emac_base + reg);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ........................... PHY INTERFACE ........................... */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enable the MDIO bit in MAC control register
|
|
|
|
* When not called from an interrupt-handler, access to the PHY must be
|
|
|
|
* protected by a spinlock.
|
|
|
|
*/
|
|
|
|
static void enable_mdi(void)
|
|
|
|
{
|
|
|
|
unsigned long ctl;
|
|
|
|
|
|
|
|
ctl = at91_emac_read(AT91_EMAC_CTL);
|
|
|
|
at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_MPE); /* enable management port */
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Disable the MDIO bit in the MAC control register
|
|
|
|
*/
|
|
|
|
static void disable_mdi(void)
|
|
|
|
{
|
|
|
|
unsigned long ctl;
|
|
|
|
|
|
|
|
ctl = at91_emac_read(AT91_EMAC_CTL);
|
|
|
|
at91_emac_write(AT91_EMAC_CTL, ctl & ~AT91_EMAC_MPE); /* disable management port */
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Wait until the PHY operation is complete.
|
|
|
|
*/
|
|
|
|
static inline void at91_phy_wait(void) {
|
|
|
|
unsigned long timeout = jiffies + 2;
|
|
|
|
|
|
|
|
while (!(at91_emac_read(AT91_EMAC_SR) & AT91_EMAC_SR_IDLE)) {
|
|
|
|
if (time_after(jiffies, timeout)) {
|
|
|
|
printk("at91_ether: MIO timeout\n");
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
cpu_relax();
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Write value to the a PHY register
|
|
|
|
* Note: MDI interface is assumed to already have been enabled.
|
|
|
|
*/
|
|
|
|
static void write_phy(unsigned char phy_addr, unsigned char address, unsigned int value)
|
|
|
|
{
|
|
|
|
at91_emac_write(AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_W
|
|
|
|
| ((phy_addr & 0x1f) << 23) | (address << 18) | (value & AT91_EMAC_DATA));
|
|
|
|
|
|
|
|
/* Wait until IDLE bit in Network Status register is cleared */
|
|
|
|
at91_phy_wait();
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Read value stored in a PHY register.
|
|
|
|
* Note: MDI interface is assumed to already have been enabled.
|
|
|
|
*/
|
|
|
|
static void read_phy(unsigned char phy_addr, unsigned char address, unsigned int *value)
|
|
|
|
{
|
|
|
|
at91_emac_write(AT91_EMAC_MAN, AT91_EMAC_MAN_802_3 | AT91_EMAC_RW_R
|
|
|
|
| ((phy_addr & 0x1f) << 23) | (address << 18));
|
|
|
|
|
|
|
|
/* Wait until IDLE bit in Network Status register is cleared */
|
|
|
|
at91_phy_wait();
|
|
|
|
|
|
|
|
*value = at91_emac_read(AT91_EMAC_MAN) & AT91_EMAC_DATA;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ........................... PHY MANAGEMENT .......................... */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Access the PHY to determine the current link speed and mode, and update the
|
|
|
|
* MAC accordingly.
|
|
|
|
* If no link or auto-negotiation is busy, then no changes are made.
|
|
|
|
*/
|
2006-06-20 05:50:23 -04:00
|
|
|
static void update_linkspeed(struct net_device *dev, int silent)
|
2006-03-24 04:50:17 -05:00
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
unsigned int bmsr, bmcr, lpa, mac_cfg;
|
|
|
|
unsigned int speed, duplex;
|
|
|
|
|
|
|
|
if (!mii_link_ok(&lp->mii)) { /* no link */
|
|
|
|
netif_carrier_off(dev);
|
2006-06-20 05:50:23 -04:00
|
|
|
if (!silent)
|
|
|
|
printk(KERN_INFO "%s: Link down.\n", dev->name);
|
2006-03-24 04:50:17 -05:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Link up, or auto-negotiation still in progress */
|
|
|
|
read_phy(lp->phy_address, MII_BMSR, &bmsr);
|
|
|
|
read_phy(lp->phy_address, MII_BMCR, &bmcr);
|
|
|
|
if (bmcr & BMCR_ANENABLE) { /* AutoNegotiation is enabled */
|
|
|
|
if (!(bmsr & BMSR_ANEGCOMPLETE))
|
|
|
|
return; /* Do nothing - another interrupt generated when negotiation complete */
|
|
|
|
|
|
|
|
read_phy(lp->phy_address, MII_LPA, &lpa);
|
|
|
|
if ((lpa & LPA_100FULL) || (lpa & LPA_100HALF)) speed = SPEED_100;
|
|
|
|
else speed = SPEED_10;
|
|
|
|
if ((lpa & LPA_100FULL) || (lpa & LPA_10FULL)) duplex = DUPLEX_FULL;
|
|
|
|
else duplex = DUPLEX_HALF;
|
|
|
|
} else {
|
|
|
|
speed = (bmcr & BMCR_SPEED100) ? SPEED_100 : SPEED_10;
|
|
|
|
duplex = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Update the MAC */
|
|
|
|
mac_cfg = at91_emac_read(AT91_EMAC_CFG) & ~(AT91_EMAC_SPD | AT91_EMAC_FD);
|
|
|
|
if (speed == SPEED_100) {
|
|
|
|
if (duplex == DUPLEX_FULL) /* 100 Full Duplex */
|
|
|
|
mac_cfg |= AT91_EMAC_SPD | AT91_EMAC_FD;
|
|
|
|
else /* 100 Half Duplex */
|
|
|
|
mac_cfg |= AT91_EMAC_SPD;
|
|
|
|
} else {
|
|
|
|
if (duplex == DUPLEX_FULL) /* 10 Full Duplex */
|
|
|
|
mac_cfg |= AT91_EMAC_FD;
|
|
|
|
else {} /* 10 Half Duplex */
|
|
|
|
}
|
|
|
|
at91_emac_write(AT91_EMAC_CFG, mac_cfg);
|
|
|
|
|
2006-06-20 05:50:23 -04:00
|
|
|
if (!silent)
|
|
|
|
printk(KERN_INFO "%s: Link now %i-%s\n", dev->name, speed, (duplex == DUPLEX_FULL) ? "FullDuplex" : "HalfDuplex");
|
2006-03-24 04:50:17 -05:00
|
|
|
netif_carrier_on(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Handle interrupts from the PHY
|
|
|
|
*/
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
|
|
|
static irqreturn_t at91ether_phy_interrupt(int irq, void *dev_id)
|
2006-03-24 04:50:17 -05:00
|
|
|
{
|
|
|
|
struct net_device *dev = (struct net_device *) dev_id;
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
unsigned int phy;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* This hander is triggered on both edges, but the PHY chips expect
|
|
|
|
* level-triggering. We therefore have to check if the PHY actually has
|
|
|
|
* an IRQ pending.
|
|
|
|
*/
|
|
|
|
enable_mdi();
|
|
|
|
if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
|
|
|
|
read_phy(lp->phy_address, MII_DSINTR_REG, &phy); /* ack interrupt in Davicom PHY */
|
|
|
|
if (!(phy & (1 << 0)))
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_LXT971A_ID) {
|
|
|
|
read_phy(lp->phy_address, MII_ISINTS_REG, &phy); /* ack interrupt in Intel PHY */
|
|
|
|
if (!(phy & (1 << 2)))
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_BCM5221_ID) {
|
|
|
|
read_phy(lp->phy_address, MII_BCMINTR_REG, &phy); /* ack interrupt in Broadcom PHY */
|
|
|
|
if (!(phy & (1 << 0)))
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_KS8721_ID) {
|
|
|
|
read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */
|
|
|
|
if (!(phy & ((1 << 2) | 1)))
|
|
|
|
goto done;
|
|
|
|
}
|
2007-05-03 03:17:15 -04:00
|
|
|
else if (lp->phy_type == MII_T78Q21x3_ID) { /* ack interrupt in Teridian PHY */
|
|
|
|
read_phy(lp->phy_address, MII_T78Q21INT_REG, &phy);
|
|
|
|
if (!(phy & ((1 << 2) | 1)))
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_DP83848_ID) {
|
|
|
|
read_phy(lp->phy_address, MII_DPPHYSTS_REG, &phy); /* ack interrupt in DP83848 PHY */
|
|
|
|
if (!(phy & (1 << 7)))
|
|
|
|
goto done;
|
|
|
|
}
|
2006-03-24 04:50:17 -05:00
|
|
|
|
2006-06-20 05:50:23 -04:00
|
|
|
update_linkspeed(dev, 0);
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
done:
|
|
|
|
disable_mdi();
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialize and enable the PHY interrupt for link-state changes
|
|
|
|
*/
|
|
|
|
static void enable_phyirq(struct net_device *dev)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
unsigned int dsintr, irq_number;
|
|
|
|
int status;
|
|
|
|
|
2006-06-20 05:50:23 -04:00
|
|
|
irq_number = lp->board_data.phy_irq_pin;
|
|
|
|
if (!irq_number) {
|
|
|
|
/*
|
|
|
|
* PHY doesn't have an IRQ pin (RTL8201, DP83847, AC101L),
|
|
|
|
* or board does not have it connected.
|
|
|
|
*/
|
2006-12-05 08:21:19 -05:00
|
|
|
mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
|
2006-03-24 04:50:17 -05:00
|
|
|
return;
|
2006-06-20 05:50:23 -04:00
|
|
|
}
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
status = request_irq(irq_number, at91ether_phy_interrupt, 0, dev->name, dev);
|
|
|
|
if (status) {
|
|
|
|
printk(KERN_ERR "at91_ether: PHY IRQ %d request failed - status %d!\n", irq_number, status);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
enable_mdi();
|
|
|
|
|
|
|
|
if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
|
|
|
|
read_phy(lp->phy_address, MII_DSINTR_REG, &dsintr);
|
|
|
|
dsintr = dsintr & ~0xf00; /* clear bits 8..11 */
|
|
|
|
write_phy(lp->phy_address, MII_DSINTR_REG, dsintr);
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
|
|
|
|
read_phy(lp->phy_address, MII_ISINTE_REG, &dsintr);
|
|
|
|
dsintr = dsintr | 0xf2; /* set bits 1, 4..7 */
|
|
|
|
write_phy(lp->phy_address, MII_ISINTE_REG, dsintr);
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
|
|
|
|
dsintr = (1 << 15) | ( 1 << 14);
|
|
|
|
write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
|
|
|
|
dsintr = (1 << 10) | ( 1 << 8);
|
|
|
|
write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
|
|
|
|
}
|
2007-05-03 03:17:15 -04:00
|
|
|
else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
|
|
|
|
read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
|
|
|
|
dsintr = dsintr | 0x500; /* set bits 8, 10 */
|
|
|
|
write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
|
|
|
|
read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
|
|
|
|
dsintr = dsintr | 0x3c; /* set bits 2..5 */
|
|
|
|
write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
|
|
|
|
read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
|
|
|
|
dsintr = dsintr | 0x3; /* set bits 0,1 */
|
|
|
|
write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
|
|
|
|
}
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
disable_mdi();
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Disable the PHY interrupt
|
|
|
|
*/
|
|
|
|
static void disable_phyirq(struct net_device *dev)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
unsigned int dsintr;
|
|
|
|
unsigned int irq_number;
|
|
|
|
|
2006-06-20 05:50:23 -04:00
|
|
|
irq_number = lp->board_data.phy_irq_pin;
|
|
|
|
if (!irq_number) {
|
2006-12-05 08:21:19 -05:00
|
|
|
del_timer_sync(&lp->check_timer);
|
2006-03-24 04:50:17 -05:00
|
|
|
return;
|
2006-06-20 05:50:23 -04:00
|
|
|
}
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
enable_mdi();
|
|
|
|
|
|
|
|
if ((lp->phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) { /* for Davicom PHY */
|
|
|
|
read_phy(lp->phy_address, MII_DSINTR_REG, &dsintr);
|
|
|
|
dsintr = dsintr | 0xf00; /* set bits 8..11 */
|
|
|
|
write_phy(lp->phy_address, MII_DSINTR_REG, dsintr);
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_LXT971A_ID) { /* for Intel PHY */
|
|
|
|
read_phy(lp->phy_address, MII_ISINTE_REG, &dsintr);
|
|
|
|
dsintr = dsintr & ~0xf2; /* clear bits 1, 4..7 */
|
|
|
|
write_phy(lp->phy_address, MII_ISINTE_REG, dsintr);
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_BCM5221_ID) { /* for Broadcom PHY */
|
|
|
|
read_phy(lp->phy_address, MII_BCMINTR_REG, &dsintr);
|
|
|
|
dsintr = ~(1 << 14);
|
|
|
|
write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr);
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_KS8721_ID) { /* for Micrel PHY */
|
|
|
|
read_phy(lp->phy_address, MII_TPISTATUS, &dsintr);
|
|
|
|
dsintr = ~((1 << 10) | (1 << 8));
|
|
|
|
write_phy(lp->phy_address, MII_TPISTATUS, dsintr);
|
|
|
|
}
|
2007-05-03 03:17:15 -04:00
|
|
|
else if (lp->phy_type == MII_T78Q21x3_ID) { /* for Teridian PHY */
|
|
|
|
read_phy(lp->phy_address, MII_T78Q21INT_REG, &dsintr);
|
|
|
|
dsintr = dsintr & ~0x500; /* clear bits 8, 10 */
|
|
|
|
write_phy(lp->phy_address, MII_T78Q21INT_REG, dsintr);
|
|
|
|
}
|
|
|
|
else if (lp->phy_type == MII_DP83848_ID) { /* National Semiconductor DP83848 PHY */
|
|
|
|
read_phy(lp->phy_address, MII_DPMICR_REG, &dsintr);
|
|
|
|
dsintr = dsintr & ~0x3; /* clear bits 0, 1 */
|
|
|
|
write_phy(lp->phy_address, MII_DPMICR_REG, dsintr);
|
|
|
|
read_phy(lp->phy_address, MII_DPMISR_REG, &dsintr);
|
|
|
|
dsintr = dsintr & ~0x3c; /* clear bits 2..5 */
|
|
|
|
write_phy(lp->phy_address, MII_DPMISR_REG, dsintr);
|
|
|
|
}
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
disable_mdi();
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
|
|
|
|
free_irq(irq_number, dev); /* Free interrupt handler */
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Perform a software reset of the PHY.
|
|
|
|
*/
|
|
|
|
#if 0
|
|
|
|
static void reset_phy(struct net_device *dev)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
unsigned int bmcr;
|
|
|
|
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
enable_mdi();
|
|
|
|
|
|
|
|
/* Perform PHY reset */
|
|
|
|
write_phy(lp->phy_address, MII_BMCR, BMCR_RESET);
|
|
|
|
|
|
|
|
/* Wait until PHY reset is complete */
|
|
|
|
do {
|
|
|
|
read_phy(lp->phy_address, MII_BMCR, &bmcr);
|
2008-01-29 15:14:56 -05:00
|
|
|
} while (!(bmcr & BMCR_RESET));
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
disable_mdi();
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2006-06-20 05:50:23 -04:00
|
|
|
static void at91ether_check_link(unsigned long dev_id)
|
|
|
|
{
|
|
|
|
struct net_device *dev = (struct net_device *) dev_id;
|
2006-12-05 08:21:19 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-06-20 05:50:23 -04:00
|
|
|
|
|
|
|
enable_mdi();
|
|
|
|
update_linkspeed(dev, 1);
|
|
|
|
disable_mdi();
|
|
|
|
|
2006-12-05 08:21:19 -05:00
|
|
|
mod_timer(&lp->check_timer, jiffies + LINK_POLL_INTERVAL);
|
2006-06-20 05:50:23 -04:00
|
|
|
}
|
|
|
|
|
2006-03-24 04:50:17 -05:00
|
|
|
/* ......................... ADDRESS MANAGEMENT ........................ */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* NOTE: Your bootloader must always set the MAC address correctly before
|
|
|
|
* booting into Linux.
|
|
|
|
*
|
|
|
|
* - It must always set the MAC address after reset, even if it doesn't
|
|
|
|
* happen to access the Ethernet while it's booting. Some versions of
|
|
|
|
* U-Boot on the AT91RM9200-DK do not do this.
|
|
|
|
*
|
|
|
|
* - Likewise it must store the addresses in the correct byte order.
|
|
|
|
* MicroMonitor (uMon) on the CSB337 does this incorrectly (and
|
|
|
|
* continues to do so, for bug-compatibility).
|
|
|
|
*/
|
|
|
|
|
|
|
|
static short __init unpack_mac_address(struct net_device *dev, unsigned int hi, unsigned int lo)
|
|
|
|
{
|
|
|
|
char addr[6];
|
|
|
|
|
|
|
|
if (machine_is_csb337()) {
|
|
|
|
addr[5] = (lo & 0xff); /* The CSB337 bootloader stores the MAC the wrong-way around */
|
|
|
|
addr[4] = (lo & 0xff00) >> 8;
|
|
|
|
addr[3] = (lo & 0xff0000) >> 16;
|
|
|
|
addr[2] = (lo & 0xff000000) >> 24;
|
|
|
|
addr[1] = (hi & 0xff);
|
|
|
|
addr[0] = (hi & 0xff00) >> 8;
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
addr[0] = (lo & 0xff);
|
|
|
|
addr[1] = (lo & 0xff00) >> 8;
|
|
|
|
addr[2] = (lo & 0xff0000) >> 16;
|
|
|
|
addr[3] = (lo & 0xff000000) >> 24;
|
|
|
|
addr[4] = (hi & 0xff);
|
|
|
|
addr[5] = (hi & 0xff00) >> 8;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (is_valid_ether_addr(addr)) {
|
|
|
|
memcpy(dev->dev_addr, &addr, 6);
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set the ethernet MAC address in dev->dev_addr
|
|
|
|
*/
|
|
|
|
static void __init get_mac_address(struct net_device *dev)
|
|
|
|
{
|
|
|
|
/* Check Specific-Address 1 */
|
|
|
|
if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA1H), at91_emac_read(AT91_EMAC_SA1L)))
|
|
|
|
return;
|
|
|
|
/* Check Specific-Address 2 */
|
|
|
|
if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA2H), at91_emac_read(AT91_EMAC_SA2L)))
|
|
|
|
return;
|
|
|
|
/* Check Specific-Address 3 */
|
|
|
|
if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA3H), at91_emac_read(AT91_EMAC_SA3L)))
|
|
|
|
return;
|
|
|
|
/* Check Specific-Address 4 */
|
|
|
|
if (unpack_mac_address(dev, at91_emac_read(AT91_EMAC_SA4H), at91_emac_read(AT91_EMAC_SA4L)))
|
|
|
|
return;
|
|
|
|
|
|
|
|
printk(KERN_ERR "at91_ether: Your bootloader did not configure a MAC address.\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Program the hardware MAC address from dev->dev_addr.
|
|
|
|
*/
|
|
|
|
static void update_mac_address(struct net_device *dev)
|
|
|
|
{
|
|
|
|
at91_emac_write(AT91_EMAC_SA1L, (dev->dev_addr[3] << 24) | (dev->dev_addr[2] << 16) | (dev->dev_addr[1] << 8) | (dev->dev_addr[0]));
|
|
|
|
at91_emac_write(AT91_EMAC_SA1H, (dev->dev_addr[5] << 8) | (dev->dev_addr[4]));
|
|
|
|
|
|
|
|
at91_emac_write(AT91_EMAC_SA2L, 0);
|
|
|
|
at91_emac_write(AT91_EMAC_SA2H, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Store the new hardware address in dev->dev_addr, and update the MAC.
|
|
|
|
*/
|
|
|
|
static int set_mac_address(struct net_device *dev, void* addr)
|
|
|
|
{
|
|
|
|
struct sockaddr *address = addr;
|
2007-10-03 20:59:30 -04:00
|
|
|
DECLARE_MAC_BUF(mac);
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
if (!is_valid_ether_addr(address->sa_data))
|
|
|
|
return -EADDRNOTAVAIL;
|
|
|
|
|
|
|
|
memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
|
|
|
|
update_mac_address(dev);
|
|
|
|
|
2007-10-03 20:59:30 -04:00
|
|
|
printk("%s: Setting MAC address to %s\n", dev->name,
|
|
|
|
print_mac(mac, dev->dev_addr));
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int inline hash_bit_value(int bitnr, __u8 *addr)
|
|
|
|
{
|
|
|
|
if (addr[bitnr / 8] & (1 << (bitnr % 8)))
|
|
|
|
return 1;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* The hash address register is 64 bits long and takes up two locations in the memory map.
|
|
|
|
* The least significant bits are stored in EMAC_HSL and the most significant
|
|
|
|
* bits in EMAC_HSH.
|
|
|
|
*
|
|
|
|
* The unicast hash enable and the multicast hash enable bits in the network configuration
|
|
|
|
* register enable the reception of hash matched frames. The destination address is
|
|
|
|
* reduced to a 6 bit index into the 64 bit hash register using the following hash function.
|
|
|
|
* The hash function is an exclusive or of every sixth bit of the destination address.
|
|
|
|
* hash_index[5] = da[5] ^ da[11] ^ da[17] ^ da[23] ^ da[29] ^ da[35] ^ da[41] ^ da[47]
|
|
|
|
* hash_index[4] = da[4] ^ da[10] ^ da[16] ^ da[22] ^ da[28] ^ da[34] ^ da[40] ^ da[46]
|
|
|
|
* hash_index[3] = da[3] ^ da[09] ^ da[15] ^ da[21] ^ da[27] ^ da[33] ^ da[39] ^ da[45]
|
|
|
|
* hash_index[2] = da[2] ^ da[08] ^ da[14] ^ da[20] ^ da[26] ^ da[32] ^ da[38] ^ da[44]
|
|
|
|
* hash_index[1] = da[1] ^ da[07] ^ da[13] ^ da[19] ^ da[25] ^ da[31] ^ da[37] ^ da[43]
|
|
|
|
* hash_index[0] = da[0] ^ da[06] ^ da[12] ^ da[18] ^ da[24] ^ da[30] ^ da[36] ^ da[42]
|
|
|
|
* da[0] represents the least significant bit of the first byte received, that is, the multicast/
|
|
|
|
* unicast indicator, and da[47] represents the most significant bit of the last byte
|
|
|
|
* received.
|
|
|
|
* If the hash index points to a bit that is set in the hash register then the frame will be
|
|
|
|
* matched according to whether the frame is multicast or unicast.
|
|
|
|
* A multicast match will be signalled if the multicast hash enable bit is set, da[0] is 1 and
|
|
|
|
* the hash index points to a bit set in the hash register.
|
|
|
|
* A unicast match will be signalled if the unicast hash enable bit is set, da[0] is 0 and the
|
|
|
|
* hash index points to a bit set in the hash register.
|
|
|
|
* To receive all multicast frames, the hash register should be set with all ones and the
|
|
|
|
* multicast hash enable bit should be set in the network configuration register.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Return the hash index value for the specified address.
|
|
|
|
*/
|
|
|
|
static int hash_get_index(__u8 *addr)
|
|
|
|
{
|
|
|
|
int i, j, bitval;
|
|
|
|
int hash_index = 0;
|
|
|
|
|
|
|
|
for (j = 0; j < 6; j++) {
|
|
|
|
for (i = 0, bitval = 0; i < 8; i++)
|
|
|
|
bitval ^= hash_bit_value(i*6 + j, addr);
|
|
|
|
|
|
|
|
hash_index |= (bitval << j);
|
|
|
|
}
|
|
|
|
|
2006-06-20 06:10:57 -04:00
|
|
|
return hash_index;
|
2006-03-24 04:50:17 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Add multicast addresses to the internal multicast-hash table.
|
|
|
|
*/
|
|
|
|
static void at91ether_sethashtable(struct net_device *dev)
|
|
|
|
{
|
|
|
|
struct dev_mc_list *curr;
|
|
|
|
unsigned long mc_filter[2];
|
|
|
|
unsigned int i, bitnr;
|
|
|
|
|
|
|
|
mc_filter[0] = mc_filter[1] = 0;
|
|
|
|
|
|
|
|
curr = dev->mc_list;
|
|
|
|
for (i = 0; i < dev->mc_count; i++, curr = curr->next) {
|
|
|
|
if (!curr) break; /* unexpected end of list */
|
|
|
|
|
|
|
|
bitnr = hash_get_index(curr->dmi_addr);
|
|
|
|
mc_filter[bitnr >> 5] |= 1 << (bitnr & 31);
|
|
|
|
}
|
|
|
|
|
2007-05-02 06:11:38 -04:00
|
|
|
at91_emac_write(AT91_EMAC_HSL, mc_filter[0]);
|
|
|
|
at91_emac_write(AT91_EMAC_HSH, mc_filter[1]);
|
2006-03-24 04:50:17 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Enable/Disable promiscuous and multicast modes.
|
|
|
|
*/
|
|
|
|
static void at91ether_set_rx_mode(struct net_device *dev)
|
|
|
|
{
|
|
|
|
unsigned long cfg;
|
|
|
|
|
|
|
|
cfg = at91_emac_read(AT91_EMAC_CFG);
|
|
|
|
|
|
|
|
if (dev->flags & IFF_PROMISC) /* Enable promiscuous mode */
|
|
|
|
cfg |= AT91_EMAC_CAF;
|
|
|
|
else if (dev->flags & (~IFF_PROMISC)) /* Disable promiscuous mode */
|
|
|
|
cfg &= ~AT91_EMAC_CAF;
|
|
|
|
|
|
|
|
if (dev->flags & IFF_ALLMULTI) { /* Enable all multicast mode */
|
|
|
|
at91_emac_write(AT91_EMAC_HSH, -1);
|
|
|
|
at91_emac_write(AT91_EMAC_HSL, -1);
|
|
|
|
cfg |= AT91_EMAC_MTI;
|
|
|
|
} else if (dev->mc_count > 0) { /* Enable specific multicasts */
|
|
|
|
at91ether_sethashtable(dev);
|
|
|
|
cfg |= AT91_EMAC_MTI;
|
|
|
|
} else if (dev->flags & (~IFF_ALLMULTI)) { /* Disable all multicast mode */
|
|
|
|
at91_emac_write(AT91_EMAC_HSH, 0);
|
|
|
|
at91_emac_write(AT91_EMAC_HSL, 0);
|
|
|
|
cfg &= ~AT91_EMAC_MTI;
|
|
|
|
}
|
|
|
|
|
|
|
|
at91_emac_write(AT91_EMAC_CFG, cfg);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* ......................... ETHTOOL SUPPORT ........................... */
|
|
|
|
|
|
|
|
static int mdio_read(struct net_device *dev, int phy_id, int location)
|
|
|
|
{
|
|
|
|
unsigned int value;
|
|
|
|
|
|
|
|
read_phy(phy_id, location, &value);
|
|
|
|
return value;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
|
|
|
|
{
|
|
|
|
write_phy(phy_id, location, value);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int at91ether_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
enable_mdi();
|
|
|
|
|
|
|
|
ret = mii_ethtool_gset(&lp->mii, cmd);
|
|
|
|
|
|
|
|
disable_mdi();
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
|
|
|
|
if (lp->phy_media == PORT_FIBRE) { /* override media type since mii.c doesn't know */
|
|
|
|
cmd->supported = SUPPORTED_FIBRE;
|
|
|
|
cmd->port = PORT_FIBRE;
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int at91ether_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
enable_mdi();
|
|
|
|
|
|
|
|
ret = mii_ethtool_sset(&lp->mii, cmd);
|
|
|
|
|
|
|
|
disable_mdi();
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int at91ether_nwayreset(struct net_device *dev)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
enable_mdi();
|
|
|
|
|
|
|
|
ret = mii_nway_restart(&lp->mii);
|
|
|
|
|
|
|
|
disable_mdi();
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void at91ether_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
|
|
{
|
|
|
|
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
|
|
|
|
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
|
2008-05-30 11:42:11 -04:00
|
|
|
strlcpy(info->bus_info, dev_name(dev->dev.parent), sizeof(info->bus_info));
|
2006-03-24 04:50:17 -05:00
|
|
|
}
|
|
|
|
|
2006-09-13 14:30:00 -04:00
|
|
|
static const struct ethtool_ops at91ether_ethtool_ops = {
|
2006-03-24 04:50:17 -05:00
|
|
|
.get_settings = at91ether_get_settings,
|
|
|
|
.set_settings = at91ether_set_settings,
|
|
|
|
.get_drvinfo = at91ether_get_drvinfo,
|
|
|
|
.nway_reset = at91ether_nwayreset,
|
|
|
|
.get_link = ethtool_op_get_link,
|
|
|
|
};
|
|
|
|
|
2006-06-20 05:59:05 -04:00
|
|
|
static int at91ether_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-06-20 05:59:05 -04:00
|
|
|
int res;
|
|
|
|
|
|
|
|
if (!netif_running(dev))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
enable_mdi();
|
|
|
|
res = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL);
|
|
|
|
disable_mdi();
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
|
|
|
|
return res;
|
|
|
|
}
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
/* ................................ MAC ................................ */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialize and start the Receiver and Transmit subsystems
|
|
|
|
*/
|
|
|
|
static void at91ether_start(struct net_device *dev)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
struct recv_desc_bufs *dlist, *dlist_phys;
|
|
|
|
int i;
|
|
|
|
unsigned long ctl;
|
|
|
|
|
|
|
|
dlist = lp->dlist;
|
|
|
|
dlist_phys = lp->dlist_phys;
|
|
|
|
|
|
|
|
for (i = 0; i < MAX_RX_DESCR; i++) {
|
|
|
|
dlist->descriptors[i].addr = (unsigned int) &dlist_phys->recv_buf[i][0];
|
|
|
|
dlist->descriptors[i].size = 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Set the Wrap bit on the last descriptor */
|
|
|
|
dlist->descriptors[i-1].addr |= EMAC_DESC_WRAP;
|
|
|
|
|
|
|
|
/* Reset buffer index */
|
|
|
|
lp->rxBuffIndex = 0;
|
|
|
|
|
|
|
|
/* Program address of descriptor list in Rx Buffer Queue register */
|
|
|
|
at91_emac_write(AT91_EMAC_RBQP, (unsigned long) dlist_phys);
|
|
|
|
|
|
|
|
/* Enable Receive and Transmit */
|
|
|
|
ctl = at91_emac_read(AT91_EMAC_CTL);
|
|
|
|
at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_RE | AT91_EMAC_TE);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Open the ethernet interface
|
|
|
|
*/
|
|
|
|
static int at91ether_open(struct net_device *dev)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
unsigned long ctl;
|
|
|
|
|
2006-06-20 06:10:57 -04:00
|
|
|
if (!is_valid_ether_addr(dev->dev_addr))
|
|
|
|
return -EADDRNOTAVAIL;
|
2006-03-24 04:50:17 -05:00
|
|
|
|
2006-06-20 06:10:57 -04:00
|
|
|
clk_enable(lp->ether_clk); /* Re-enable Peripheral clock */
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
/* Clear internal statistics */
|
|
|
|
ctl = at91_emac_read(AT91_EMAC_CTL);
|
|
|
|
at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_CSR);
|
|
|
|
|
|
|
|
/* Update the MAC address (incase user has changed it) */
|
|
|
|
update_mac_address(dev);
|
|
|
|
|
|
|
|
/* Enable PHY interrupt */
|
|
|
|
enable_phyirq(dev);
|
|
|
|
|
|
|
|
/* Enable MAC interrupts */
|
|
|
|
at91_emac_write(AT91_EMAC_IER, AT91_EMAC_RCOM | AT91_EMAC_RBNA
|
|
|
|
| AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM
|
|
|
|
| AT91_EMAC_ROVR | AT91_EMAC_ABT);
|
|
|
|
|
|
|
|
/* Determine current link speed */
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
enable_mdi();
|
2006-06-20 05:50:23 -04:00
|
|
|
update_linkspeed(dev, 0);
|
2006-03-24 04:50:17 -05:00
|
|
|
disable_mdi();
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
|
|
|
|
at91ether_start(dev);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Close the interface
|
|
|
|
*/
|
|
|
|
static int at91ether_close(struct net_device *dev)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
unsigned long ctl;
|
|
|
|
|
|
|
|
/* Disable Receiver and Transmitter */
|
|
|
|
ctl = at91_emac_read(AT91_EMAC_CTL);
|
|
|
|
at91_emac_write(AT91_EMAC_CTL, ctl & ~(AT91_EMAC_TE | AT91_EMAC_RE));
|
|
|
|
|
|
|
|
/* Disable PHY interrupt */
|
|
|
|
disable_phyirq(dev);
|
|
|
|
|
|
|
|
/* Disable MAC interrupts */
|
|
|
|
at91_emac_write(AT91_EMAC_IDR, AT91_EMAC_RCOM | AT91_EMAC_RBNA
|
|
|
|
| AT91_EMAC_TUND | AT91_EMAC_RTRY | AT91_EMAC_TCOM
|
|
|
|
| AT91_EMAC_ROVR | AT91_EMAC_ABT);
|
|
|
|
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
|
2006-06-20 06:10:57 -04:00
|
|
|
clk_disable(lp->ether_clk); /* Disable Peripheral clock */
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Transmit packet.
|
|
|
|
*/
|
|
|
|
static int at91ether_tx(struct sk_buff *skb, struct net_device *dev)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
if (at91_emac_read(AT91_EMAC_TSR) & AT91_EMAC_TSR_BNQ) {
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
|
|
|
|
/* Store packet information (to free when Tx completed) */
|
|
|
|
lp->skb = skb;
|
|
|
|
lp->skb_length = skb->len;
|
|
|
|
lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE);
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.tx_bytes += skb->len;
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
/* Set address of the data in the Transmit Address register */
|
|
|
|
at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr);
|
|
|
|
/* Set length of the packet in the Transmit Control register */
|
|
|
|
at91_emac_write(AT91_EMAC_TCR, skb->len);
|
|
|
|
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
} else {
|
|
|
|
printk(KERN_ERR "at91_ether.c: at91ether_tx() called, but device is busy!\n");
|
|
|
|
return 1; /* if we return anything but zero, dev.c:1055 calls kfree_skb(skb)
|
|
|
|
on this skb, he also reports -ENETDOWN and printk's, so either
|
|
|
|
we free and return(0) or don't free and return 1 */
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Update the current statistics from the internal statistics registers.
|
|
|
|
*/
|
|
|
|
static struct net_device_stats *at91ether_stats(struct net_device *dev)
|
|
|
|
{
|
|
|
|
int ale, lenerr, seqe, lcol, ecol;
|
|
|
|
|
|
|
|
if (netif_running(dev)) {
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.rx_packets += at91_emac_read(AT91_EMAC_OK); /* Good frames received */
|
2006-03-24 04:50:17 -05:00
|
|
|
ale = at91_emac_read(AT91_EMAC_ALE);
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.rx_frame_errors += ale; /* Alignment errors */
|
2006-03-24 04:50:17 -05:00
|
|
|
lenerr = at91_emac_read(AT91_EMAC_ELR) + at91_emac_read(AT91_EMAC_USF);
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.rx_length_errors += lenerr; /* Excessive Length or Undersize Frame error */
|
2006-03-24 04:50:17 -05:00
|
|
|
seqe = at91_emac_read(AT91_EMAC_SEQE);
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.rx_crc_errors += seqe; /* CRC error */
|
|
|
|
dev->stats.rx_fifo_errors += at91_emac_read(AT91_EMAC_DRFC); /* Receive buffer not available */
|
|
|
|
dev->stats.rx_errors += (ale + lenerr + seqe
|
2006-03-24 04:50:17 -05:00
|
|
|
+ at91_emac_read(AT91_EMAC_CDE) + at91_emac_read(AT91_EMAC_RJB));
|
|
|
|
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.tx_packets += at91_emac_read(AT91_EMAC_FRA); /* Frames successfully transmitted */
|
|
|
|
dev->stats.tx_fifo_errors += at91_emac_read(AT91_EMAC_TUE); /* Transmit FIFO underruns */
|
|
|
|
dev->stats.tx_carrier_errors += at91_emac_read(AT91_EMAC_CSE); /* Carrier Sense errors */
|
|
|
|
dev->stats.tx_heartbeat_errors += at91_emac_read(AT91_EMAC_SQEE);/* Heartbeat error */
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
lcol = at91_emac_read(AT91_EMAC_LCOL);
|
|
|
|
ecol = at91_emac_read(AT91_EMAC_ECOL);
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.tx_window_errors += lcol; /* Late collisions */
|
|
|
|
dev->stats.tx_aborted_errors += ecol; /* 16 collisions */
|
2006-03-24 04:50:17 -05:00
|
|
|
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.collisions += (at91_emac_read(AT91_EMAC_SCOL) + at91_emac_read(AT91_EMAC_MCOL) + lcol + ecol);
|
2006-03-24 04:50:17 -05:00
|
|
|
}
|
2008-07-17 04:01:26 -04:00
|
|
|
return &dev->stats;
|
2006-03-24 04:50:17 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Extract received frame from buffer descriptors and sent to upper layers.
|
|
|
|
* (Called from interrupt context)
|
|
|
|
*/
|
|
|
|
static void at91ether_rx(struct net_device *dev)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
struct recv_desc_bufs *dlist;
|
|
|
|
unsigned char *p_recv;
|
|
|
|
struct sk_buff *skb;
|
|
|
|
unsigned int pktlen;
|
|
|
|
|
|
|
|
dlist = lp->dlist;
|
|
|
|
while (dlist->descriptors[lp->rxBuffIndex].addr & EMAC_DESC_DONE) {
|
|
|
|
p_recv = dlist->recv_buf[lp->rxBuffIndex];
|
|
|
|
pktlen = dlist->descriptors[lp->rxBuffIndex].size & 0x7ff; /* Length of frame including FCS */
|
2006-12-05 08:37:02 -05:00
|
|
|
skb = dev_alloc_skb(pktlen + 2);
|
2006-03-24 04:50:17 -05:00
|
|
|
if (skb != NULL) {
|
|
|
|
skb_reserve(skb, 2);
|
|
|
|
memcpy(skb_put(skb, pktlen), p_recv, pktlen);
|
|
|
|
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
dev->last_rx = jiffies;
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.rx_bytes += pktlen;
|
2006-03-24 04:50:17 -05:00
|
|
|
netif_rx(skb);
|
|
|
|
}
|
|
|
|
else {
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.rx_dropped += 1;
|
2006-03-24 04:50:17 -05:00
|
|
|
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (dlist->descriptors[lp->rxBuffIndex].size & EMAC_MULTICAST)
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.multicast++;
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE; /* reset ownership bit */
|
|
|
|
if (lp->rxBuffIndex == MAX_RX_DESCR-1) /* wrap after last buffer */
|
|
|
|
lp->rxBuffIndex = 0;
|
|
|
|
else
|
|
|
|
lp->rxBuffIndex++;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* MAC interrupt handler
|
|
|
|
*/
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
|
|
|
static irqreturn_t at91ether_interrupt(int irq, void *dev_id)
|
2006-03-24 04:50:17 -05:00
|
|
|
{
|
|
|
|
struct net_device *dev = (struct net_device *) dev_id;
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
unsigned long intstatus, ctl;
|
|
|
|
|
|
|
|
/* MAC Interrupt Status register indicates what interrupts are pending.
|
|
|
|
It is automatically cleared once read. */
|
|
|
|
intstatus = at91_emac_read(AT91_EMAC_ISR);
|
|
|
|
|
|
|
|
if (intstatus & AT91_EMAC_RCOM) /* Receive complete */
|
|
|
|
at91ether_rx(dev);
|
|
|
|
|
2006-06-20 06:10:57 -04:00
|
|
|
if (intstatus & AT91_EMAC_TCOM) { /* Transmit complete */
|
2006-03-24 04:50:17 -05:00
|
|
|
/* The TCOM bit is set even if the transmission failed. */
|
|
|
|
if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY))
|
2008-07-17 04:01:26 -04:00
|
|
|
dev->stats.tx_errors += 1;
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
if (lp->skb) {
|
|
|
|
dev_kfree_skb_irq(lp->skb);
|
|
|
|
lp->skb = NULL;
|
|
|
|
dma_unmap_single(NULL, lp->skb_physaddr, lp->skb_length, DMA_TO_DEVICE);
|
|
|
|
}
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Work-around for Errata #11 */
|
|
|
|
if (intstatus & AT91_EMAC_RBNA) {
|
|
|
|
ctl = at91_emac_read(AT91_EMAC_CTL);
|
|
|
|
at91_emac_write(AT91_EMAC_CTL, ctl & ~AT91_EMAC_RE);
|
|
|
|
at91_emac_write(AT91_EMAC_CTL, ctl | AT91_EMAC_RE);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (intstatus & AT91_EMAC_ROVR)
|
|
|
|
printk("%s: ROVR error\n", dev->name);
|
|
|
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
}
|
|
|
|
|
2006-12-05 08:33:05 -05:00
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
|
|
static void at91ether_poll_controller(struct net_device *dev)
|
|
|
|
{
|
|
|
|
unsigned long flags;
|
|
|
|
|
|
|
|
local_irq_save(flags);
|
|
|
|
at91ether_interrupt(dev->irq, dev);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
}
|
|
|
|
#endif
|
|
|
|
|
2006-03-24 04:50:17 -05:00
|
|
|
/*
|
|
|
|
* Initialize the ethernet interface
|
|
|
|
*/
|
2006-06-20 06:10:57 -04:00
|
|
|
static int __init at91ether_setup(unsigned long phy_type, unsigned short phy_address,
|
|
|
|
struct platform_device *pdev, struct clk *ether_clk)
|
2006-03-24 04:50:17 -05:00
|
|
|
{
|
|
|
|
struct at91_eth_data *board_data = pdev->dev.platform_data;
|
|
|
|
struct net_device *dev;
|
|
|
|
struct at91_private *lp;
|
|
|
|
unsigned int val;
|
|
|
|
int res;
|
2007-10-03 20:59:30 -04:00
|
|
|
DECLARE_MAC_BUF(mac);
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
dev = alloc_etherdev(sizeof(struct at91_private));
|
|
|
|
if (!dev)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
dev->base_addr = AT91_VA_BASE_EMAC;
|
2006-09-27 04:44:11 -04:00
|
|
|
dev->irq = AT91RM9200_ID_EMAC;
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
/* Install the interrupt handler */
|
|
|
|
if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) {
|
|
|
|
free_netdev(dev);
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Allocate memory for DMA Receive descriptors */
|
2006-12-05 08:09:16 -05:00
|
|
|
lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
lp->dlist = (struct recv_desc_bufs *) dma_alloc_coherent(NULL, sizeof(struct recv_desc_bufs), (dma_addr_t *) &lp->dlist_phys, GFP_KERNEL);
|
|
|
|
if (lp->dlist == NULL) {
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
free_netdev(dev);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
lp->board_data = *board_data;
|
2006-06-20 06:10:57 -04:00
|
|
|
lp->ether_clk = ether_clk;
|
2006-03-24 04:50:17 -05:00
|
|
|
platform_set_drvdata(pdev, dev);
|
|
|
|
|
|
|
|
spin_lock_init(&lp->lock);
|
|
|
|
|
|
|
|
ether_setup(dev);
|
|
|
|
dev->open = at91ether_open;
|
|
|
|
dev->stop = at91ether_close;
|
|
|
|
dev->hard_start_xmit = at91ether_tx;
|
|
|
|
dev->get_stats = at91ether_stats;
|
|
|
|
dev->set_multicast_list = at91ether_set_rx_mode;
|
|
|
|
dev->set_mac_address = set_mac_address;
|
|
|
|
dev->ethtool_ops = &at91ether_ethtool_ops;
|
2006-06-20 05:59:05 -04:00
|
|
|
dev->do_ioctl = at91ether_ioctl;
|
2006-12-05 08:33:05 -05:00
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
|
|
dev->poll_controller = at91ether_poll_controller;
|
|
|
|
#endif
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
|
|
|
|
get_mac_address(dev); /* Get ethernet address and store it in dev->dev_addr */
|
|
|
|
update_mac_address(dev); /* Program ethernet address into MAC */
|
|
|
|
|
|
|
|
at91_emac_write(AT91_EMAC_CTL, 0);
|
|
|
|
|
|
|
|
if (lp->board_data.is_rmii)
|
|
|
|
at91_emac_write(AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG | AT91_EMAC_RMII);
|
|
|
|
else
|
|
|
|
at91_emac_write(AT91_EMAC_CFG, AT91_EMAC_CLK_DIV32 | AT91_EMAC_BIG);
|
|
|
|
|
|
|
|
/* Perform PHY-specific initialization */
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
enable_mdi();
|
|
|
|
if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID)) {
|
|
|
|
read_phy(phy_address, MII_DSCR_REG, &val);
|
|
|
|
if ((val & (1 << 10)) == 0) /* DSCR bit 10 is 0 -- fiber mode */
|
|
|
|
lp->phy_media = PORT_FIBRE;
|
|
|
|
} else if (machine_is_csb337()) {
|
|
|
|
/* mix link activity status into LED2 link state */
|
|
|
|
write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22);
|
2008-04-15 16:10:11 -04:00
|
|
|
} else if (machine_is_ecbat91())
|
|
|
|
write_phy(phy_address, MII_LEDCTRL_REG, 0x156A);
|
|
|
|
|
2006-03-24 04:50:17 -05:00
|
|
|
disable_mdi();
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
|
|
|
|
lp->mii.dev = dev; /* Support for ethtool */
|
|
|
|
lp->mii.mdio_read = mdio_read;
|
|
|
|
lp->mii.mdio_write = mdio_write;
|
2006-06-20 05:59:05 -04:00
|
|
|
lp->mii.phy_id = phy_address;
|
|
|
|
lp->mii.phy_id_mask = 0x1f;
|
|
|
|
lp->mii.reg_num_mask = 0x1f;
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
lp->phy_type = phy_type; /* Type of PHY connected */
|
|
|
|
lp->phy_address = phy_address; /* MDI address of PHY */
|
|
|
|
|
|
|
|
/* Register the network interface */
|
|
|
|
res = register_netdev(dev);
|
|
|
|
if (res) {
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
free_netdev(dev);
|
|
|
|
dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
|
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Determine current link speed */
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
enable_mdi();
|
2006-06-20 05:50:23 -04:00
|
|
|
update_linkspeed(dev, 0);
|
2006-03-24 04:50:17 -05:00
|
|
|
disable_mdi();
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
netif_carrier_off(dev); /* will be enabled in open() */
|
|
|
|
|
2006-06-20 05:50:23 -04:00
|
|
|
/* If board has no PHY IRQ, use a timer to poll the PHY */
|
|
|
|
if (!lp->board_data.phy_irq_pin) {
|
2006-12-05 08:21:19 -05:00
|
|
|
init_timer(&lp->check_timer);
|
|
|
|
lp->check_timer.data = (unsigned long)dev;
|
|
|
|
lp->check_timer.function = at91ether_check_link;
|
2006-06-20 05:50:23 -04:00
|
|
|
}
|
|
|
|
|
2006-03-24 04:50:17 -05:00
|
|
|
/* Display ethernet banner */
|
2007-10-03 20:59:30 -04:00
|
|
|
printk(KERN_INFO "%s: AT91 ethernet at 0x%08x int=%d %s%s (%s)\n",
|
|
|
|
dev->name, (uint) dev->base_addr, dev->irq,
|
|
|
|
at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_SPD ? "100-" : "10-",
|
|
|
|
at91_emac_read(AT91_EMAC_CFG) & AT91_EMAC_FD ? "FullDuplex" : "HalfDuplex",
|
|
|
|
print_mac(mac, dev->dev_addr));
|
2006-03-24 04:50:17 -05:00
|
|
|
if ((phy_type == MII_DM9161_ID) || (lp->phy_type == MII_DM9161A_ID))
|
2006-06-20 06:10:57 -04:00
|
|
|
printk(KERN_INFO "%s: Davicom 9161 PHY %s\n", dev->name, (lp->phy_media == PORT_FIBRE) ? "(Fiber)" : "(Copper)");
|
2006-03-24 04:50:17 -05:00
|
|
|
else if (phy_type == MII_LXT971A_ID)
|
|
|
|
printk(KERN_INFO "%s: Intel LXT971A PHY\n", dev->name);
|
|
|
|
else if (phy_type == MII_RTL8201_ID)
|
|
|
|
printk(KERN_INFO "%s: Realtek RTL8201(B)L PHY\n", dev->name);
|
|
|
|
else if (phy_type == MII_BCM5221_ID)
|
|
|
|
printk(KERN_INFO "%s: Broadcom BCM5221 PHY\n", dev->name);
|
|
|
|
else if (phy_type == MII_DP83847_ID)
|
|
|
|
printk(KERN_INFO "%s: National Semiconductor DP83847 PHY\n", dev->name);
|
2007-05-03 03:17:15 -04:00
|
|
|
else if (phy_type == MII_DP83848_ID)
|
|
|
|
printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name);
|
2006-03-24 04:50:17 -05:00
|
|
|
else if (phy_type == MII_AC101L_ID)
|
|
|
|
printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name);
|
|
|
|
else if (phy_type == MII_KS8721_ID)
|
|
|
|
printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name);
|
2007-05-03 03:17:15 -04:00
|
|
|
else if (phy_type == MII_T78Q21x3_ID)
|
|
|
|
printk(KERN_INFO "%s: Teridian 78Q21x3 PHY\n", dev->name);
|
|
|
|
else if (phy_type == MII_LAN83C185_ID)
|
|
|
|
printk(KERN_INFO "%s: SMSC LAN83C185 PHY\n", dev->name);
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Detect MAC and PHY and perform initialization
|
|
|
|
*/
|
|
|
|
static int __init at91ether_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
unsigned int phyid1, phyid2;
|
|
|
|
int detected = -1;
|
|
|
|
unsigned long phy_id;
|
|
|
|
unsigned short phy_address = 0;
|
2006-06-20 06:10:57 -04:00
|
|
|
struct clk *ether_clk;
|
2006-03-24 04:50:17 -05:00
|
|
|
|
|
|
|
ether_clk = clk_get(&pdev->dev, "ether_clk");
|
2006-06-20 06:10:57 -04:00
|
|
|
if (IS_ERR(ether_clk)) {
|
2006-03-24 04:50:17 -05:00
|
|
|
printk(KERN_ERR "at91_ether: no clock defined\n");
|
|
|
|
return -ENODEV;
|
|
|
|
}
|
|
|
|
clk_enable(ether_clk); /* Enable Peripheral clock */
|
|
|
|
|
|
|
|
while ((detected != 0) && (phy_address < 32)) {
|
|
|
|
/* Read the PHY ID registers */
|
|
|
|
enable_mdi();
|
|
|
|
read_phy(phy_address, MII_PHYSID1, &phyid1);
|
|
|
|
read_phy(phy_address, MII_PHYSID2, &phyid2);
|
|
|
|
disable_mdi();
|
|
|
|
|
|
|
|
phy_id = (phyid1 << 16) | (phyid2 & 0xfff0);
|
|
|
|
switch (phy_id) {
|
|
|
|
case MII_DM9161_ID: /* Davicom 9161: PHY_ID1 = 0x181, PHY_ID2 = B881 */
|
|
|
|
case MII_DM9161A_ID: /* Davicom 9161A: PHY_ID1 = 0x181, PHY_ID2 = B8A0 */
|
|
|
|
case MII_LXT971A_ID: /* Intel LXT971A: PHY_ID1 = 0x13, PHY_ID2 = 78E0 */
|
|
|
|
case MII_RTL8201_ID: /* Realtek RTL8201: PHY_ID1 = 0, PHY_ID2 = 0x8201 */
|
|
|
|
case MII_BCM5221_ID: /* Broadcom BCM5221: PHY_ID1 = 0x40, PHY_ID2 = 0x61e0 */
|
|
|
|
case MII_DP83847_ID: /* National Semiconductor DP83847: */
|
2007-05-03 03:17:15 -04:00
|
|
|
case MII_DP83848_ID: /* National Semiconductor DP83848: */
|
2006-03-24 04:50:17 -05:00
|
|
|
case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */
|
|
|
|
case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */
|
2007-05-03 03:17:15 -04:00
|
|
|
case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */
|
|
|
|
case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */
|
2006-06-20 06:10:57 -04:00
|
|
|
detected = at91ether_setup(phy_id, phy_address, pdev, ether_clk);
|
2006-03-24 04:50:17 -05:00
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
phy_address++;
|
|
|
|
}
|
|
|
|
|
|
|
|
clk_disable(ether_clk); /* Disable Peripheral clock */
|
|
|
|
|
|
|
|
return detected;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devexit at91ether_remove(struct platform_device *pdev)
|
|
|
|
{
|
2006-12-05 08:09:16 -05:00
|
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
|
|
struct at91_private *lp = netdev_priv(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
|
2006-12-05 08:09:16 -05:00
|
|
|
unregister_netdev(dev);
|
|
|
|
free_irq(dev->irq, dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
dma_free_coherent(NULL, sizeof(struct recv_desc_bufs), lp->dlist, (dma_addr_t)lp->dlist_phys);
|
2006-06-20 06:10:57 -04:00
|
|
|
clk_put(lp->ether_clk);
|
2006-03-24 04:50:17 -05:00
|
|
|
|
2006-12-05 08:09:16 -05:00
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
|
|
free_netdev(dev);
|
2006-03-24 04:50:17 -05:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2006-06-20 06:19:13 -04:00
|
|
|
#ifdef CONFIG_PM
|
|
|
|
|
|
|
|
static int at91ether_suspend(struct platform_device *pdev, pm_message_t mesg)
|
|
|
|
{
|
|
|
|
struct net_device *net_dev = platform_get_drvdata(pdev);
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(net_dev);
|
2006-06-20 06:19:13 -04:00
|
|
|
int phy_irq = lp->board_data.phy_irq_pin;
|
|
|
|
|
|
|
|
if (netif_running(net_dev)) {
|
|
|
|
if (phy_irq)
|
|
|
|
disable_irq(phy_irq);
|
|
|
|
|
|
|
|
netif_stop_queue(net_dev);
|
|
|
|
netif_device_detach(net_dev);
|
|
|
|
|
|
|
|
clk_disable(lp->ether_clk);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int at91ether_resume(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct net_device *net_dev = platform_get_drvdata(pdev);
|
2006-12-05 08:09:16 -05:00
|
|
|
struct at91_private *lp = netdev_priv(net_dev);
|
2006-06-20 06:19:13 -04:00
|
|
|
int phy_irq = lp->board_data.phy_irq_pin;
|
|
|
|
|
|
|
|
if (netif_running(net_dev)) {
|
|
|
|
clk_enable(lp->ether_clk);
|
|
|
|
|
|
|
|
netif_device_attach(net_dev);
|
|
|
|
netif_start_queue(net_dev);
|
|
|
|
|
|
|
|
if (phy_irq)
|
|
|
|
enable_irq(phy_irq);
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#else
|
|
|
|
#define at91ether_suspend NULL
|
|
|
|
#define at91ether_resume NULL
|
|
|
|
#endif
|
|
|
|
|
2006-03-24 04:50:17 -05:00
|
|
|
static struct platform_driver at91ether_driver = {
|
|
|
|
.probe = at91ether_probe,
|
|
|
|
.remove = __devexit_p(at91ether_remove),
|
2006-06-20 06:19:13 -04:00
|
|
|
.suspend = at91ether_suspend,
|
|
|
|
.resume = at91ether_resume,
|
2006-03-24 04:50:17 -05:00
|
|
|
.driver = {
|
|
|
|
.name = DRV_NAME,
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init at91ether_init(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&at91ether_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit at91ether_exit(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&at91ether_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(at91ether_init)
|
|
|
|
module_exit(at91ether_exit)
|
|
|
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
|
|
|
|
MODULE_AUTHOR("Andrew Victor");
|
2008-04-18 16:50:44 -04:00
|
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|