2005-04-16 18:20:36 -04:00
|
|
|
/* ewrk3.c: A DIGITAL EtherWORKS 3 ethernet driver for Linux.
|
|
|
|
|
|
|
|
|
|
Written 1994 by David C. Davies.
|
|
|
|
|
|
|
|
|
|
Copyright 1994 Digital Equipment Corporation.
|
|
|
|
|
|
|
|
|
|
This software may be used and distributed according to the terms of
|
|
|
|
|
the GNU General Public License, incorporated herein by reference.
|
|
|
|
|
|
|
|
|
|
This driver is written for the Digital Equipment Corporation series
|
|
|
|
|
of EtherWORKS ethernet cards:
|
|
|
|
|
|
|
|
|
|
DE203 Turbo (BNC)
|
|
|
|
|
DE204 Turbo (TP)
|
|
|
|
|
DE205 Turbo (TP BNC)
|
|
|
|
|
|
|
|
|
|
The driver has been tested on a relatively busy network using the DE205
|
|
|
|
|
card and benchmarked with 'ttcp': it transferred 16M of data at 975kB/s
|
|
|
|
|
(7.8Mb/s) to a DECstation 5000/200.
|
|
|
|
|
|
|
|
|
|
The author may be reached at davies@maniac.ultranet.com.
|
|
|
|
|
|
|
|
|
|
=========================================================================
|
|
|
|
|
This driver has been written substantially from scratch, although its
|
|
|
|
|
inheritance of style and stack interface from 'depca.c' and in turn from
|
|
|
|
|
Donald Becker's 'lance.c' should be obvious.
|
|
|
|
|
|
|
|
|
|
The DE203/4/5 boards all use a new proprietary chip in place of the
|
|
|
|
|
LANCE chip used in prior cards (DEPCA, DE100, DE200/1/2, DE210, DE422).
|
|
|
|
|
Use the depca.c driver in the standard distribution for the LANCE based
|
|
|
|
|
cards from DIGITAL; this driver will not work with them.
|
|
|
|
|
|
|
|
|
|
The DE203/4/5 cards have 2 main modes: shared memory and I/O only. I/O
|
|
|
|
|
only makes all the card accesses through I/O transactions and no high
|
|
|
|
|
(shared) memory is used. This mode provides a >48% performance penalty
|
|
|
|
|
and is deprecated in this driver, although allowed to provide initial
|
|
|
|
|
setup when hardstrapped.
|
|
|
|
|
|
|
|
|
|
The shared memory mode comes in 3 flavours: 2kB, 32kB and 64kB. There is
|
|
|
|
|
no point in using any mode other than the 2kB mode - their performances
|
|
|
|
|
are virtually identical, although the driver has been tested in the 2kB
|
|
|
|
|
and 32kB modes. I would suggest you uncomment the line:
|
|
|
|
|
|
|
|
|
|
FORCE_2K_MODE;
|
|
|
|
|
|
|
|
|
|
to allow the driver to configure the card as a 2kB card at your current
|
|
|
|
|
base address, thus leaving more room to clutter your system box with
|
|
|
|
|
other memory hungry boards.
|
|
|
|
|
|
|
|
|
|
As many ISA and EISA cards can be supported under this driver as you
|
|
|
|
|
wish, limited primarily by the available IRQ lines, rather than by the
|
|
|
|
|
available I/O addresses (24 ISA, 16 EISA). I have checked different
|
|
|
|
|
configurations of multiple depca cards and ewrk3 cards and have not
|
|
|
|
|
found a problem yet (provided you have at least depca.c v0.38) ...
|
|
|
|
|
|
|
|
|
|
The board IRQ setting must be at an unused IRQ which is auto-probed
|
|
|
|
|
using Donald Becker's autoprobe routines. All these cards are at
|
|
|
|
|
{5,10,11,15}.
|
|
|
|
|
|
|
|
|
|
No 16MB memory limitation should exist with this driver as DMA is not
|
|
|
|
|
used and the common memory area is in low memory on the network card (my
|
|
|
|
|
current system has 20MB and I've not had problems yet).
|
|
|
|
|
|
|
|
|
|
The ability to load this driver as a loadable module has been included
|
|
|
|
|
and used extensively during the driver development (to save those long
|
|
|
|
|
reboot sequences). To utilise this ability, you have to do 8 things:
|
|
|
|
|
|
|
|
|
|
0) have a copy of the loadable modules code installed on your system.
|
|
|
|
|
1) copy ewrk3.c from the /linux/drivers/net directory to your favourite
|
|
|
|
|
temporary directory.
|
|
|
|
|
2) edit the source code near line 1898 to reflect the I/O address and
|
|
|
|
|
IRQ you're using.
|
|
|
|
|
3) compile ewrk3.c, but include -DMODULE in the command line to ensure
|
|
|
|
|
that the correct bits are compiled (see end of source code).
|
|
|
|
|
4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
|
|
|
|
|
kernel with the ewrk3 configuration turned off and reboot.
|
|
|
|
|
5) insmod ewrk3.o
|
|
|
|
|
[Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y]
|
|
|
|
|
[Adam Kropelin: now accepts irq=x1,x2 io=y1,y2 for multiple cards]
|
|
|
|
|
6) run the net startup bits for your new eth?? interface manually
|
|
|
|
|
(usually /etc/rc.inet[12] at boot time).
|
|
|
|
|
7) enjoy!
|
|
|
|
|
|
|
|
|
|
Note that autoprobing is not allowed in loadable modules - the system is
|
|
|
|
|
already up and running and you're messing with interrupts.
|
|
|
|
|
|
|
|
|
|
To unload a module, turn off the associated interface
|
|
|
|
|
'ifconfig eth?? down' then 'rmmod ewrk3'.
|
|
|
|
|
|
|
|
|
|
Promiscuous mode has been turned off in this driver, but all the
|
|
|
|
|
multicast address bits have been turned on. This improved the send
|
|
|
|
|
performance on a busy network by about 13%.
|
|
|
|
|
|
|
|
|
|
Ioctl's have now been provided (primarily because I wanted to grab some
|
|
|
|
|
packet size statistics). They are patterned after 'plipconfig.c' from a
|
|
|
|
|
suggestion by Alan Cox. Using these ioctls, you can enable promiscuous
|
|
|
|
|
mode, add/delete multicast addresses, change the hardware address, get
|
|
|
|
|
packet size distribution statistics and muck around with the control and
|
|
|
|
|
status register. I'll add others if and when the need arises.
|
|
|
|
|
|
|
|
|
|
TO DO:
|
|
|
|
|
------
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Revision History
|
|
|
|
|
----------------
|
|
|
|
|
|
|
|
|
|
Version Date Description
|
|
|
|
|
|
|
|
|
|
0.1 26-aug-94 Initial writing. ALPHA code release.
|
|
|
|
|
0.11 31-aug-94 Fixed: 2k mode memory base calc.,
|
|
|
|
|
LeMAC version calc.,
|
|
|
|
|
IRQ vector assignments during autoprobe.
|
|
|
|
|
0.12 31-aug-94 Tested working on LeMAC2 (DE20[345]-AC) card.
|
|
|
|
|
Fixed up MCA hash table algorithm.
|
|
|
|
|
0.20 4-sep-94 Added IOCTL functionality.
|
|
|
|
|
0.21 14-sep-94 Added I/O mode.
|
|
|
|
|
0.21axp 15-sep-94 Special version for ALPHA AXP Linux V1.0.
|
|
|
|
|
0.22 16-sep-94 Added more IOCTLs & tidied up.
|
|
|
|
|
0.23 21-sep-94 Added transmit cut through.
|
|
|
|
|
0.24 31-oct-94 Added uid checks in some ioctls.
|
|
|
|
|
0.30 1-nov-94 BETA code release.
|
|
|
|
|
0.31 5-dec-94 Added check/allocate region code.
|
|
|
|
|
0.32 16-jan-95 Broadcast packet fix.
|
|
|
|
|
0.33 10-Feb-95 Fix recognition bug reported by <bkm@star.rl.ac.uk>.
|
|
|
|
|
0.40 27-Dec-95 Rationalise MODULE and autoprobe code.
|
|
|
|
|
Rewrite for portability & updated.
|
|
|
|
|
ALPHA support from <jestabro@amt.tay1.dec.com>
|
|
|
|
|
Added verify_area() calls in ewrk3_ioctl() from
|
|
|
|
|
suggestion by <heiko@colossus.escape.de>.
|
|
|
|
|
Add new multicasting code.
|
|
|
|
|
0.41 20-Jan-96 Fix IRQ set up problem reported by
|
|
|
|
|
<kenneth@bbs.sas.ntu.ac.sg>.
|
|
|
|
|
0.42 22-Apr-96 Fix alloc_device() bug <jari@markkus2.fimr.fi>
|
|
|
|
|
0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c
|
|
|
|
|
0.44 08-Nov-01 use library crc32 functions <Matt_Domsch@dell.com>
|
|
|
|
|
0.45 19-Jul-02 fix unaligned access on alpha <martin@bruli.net>
|
|
|
|
|
0.46 10-Oct-02 Multiple NIC support when module <akropel1@rochester.rr.com>
|
|
|
|
|
0.47 18-Oct-02 ethtool support <akropel1@rochester.rr.com>
|
|
|
|
|
0.48 18-Oct-02 cli/sti removal for 2.5 <vda@port.imtp.ilyichevsk.odessa.ua>
|
|
|
|
|
ioctl locking, signature search cleanup <akropel1@rochester.rr.com>
|
|
|
|
|
|
|
|
|
|
=========================================================================
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
#include <linux/module.h>
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
|
#include <linux/string.h>
|
|
|
|
|
#include <linux/errno.h>
|
|
|
|
|
#include <linux/ioport.h>
|
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
|
#include <linux/delay.h>
|
|
|
|
|
#include <linux/init.h>
|
|
|
|
|
#include <linux/crc32.h>
|
|
|
|
|
#include <linux/netdevice.h>
|
|
|
|
|
#include <linux/etherdevice.h>
|
|
|
|
|
#include <linux/skbuff.h>
|
|
|
|
|
#include <linux/ethtool.h>
|
|
|
|
|
#include <linux/time.h>
|
|
|
|
|
#include <linux/types.h>
|
|
|
|
|
#include <linux/unistd.h>
|
|
|
|
|
#include <linux/ctype.h>
|
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
|
|
|
|
|
|
#include <asm/io.h>
|
|
|
|
|
#include <asm/dma.h>
|
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
|
|
|
|
|
|
#include "ewrk3.h"
|
|
|
|
|
|
|
|
|
|
#define DRV_NAME "ewrk3"
|
|
|
|
|
#define DRV_VERSION "0.48"
|
|
|
|
|
|
|
|
|
|
static char version[] __initdata =
|
|
|
|
|
DRV_NAME ":v" DRV_VERSION " 2002/10/18 davies@maniac.ultranet.com\n";
|
|
|
|
|
|
|
|
|
|
#ifdef EWRK3_DEBUG
|
|
|
|
|
static int ewrk3_debug = EWRK3_DEBUG;
|
|
|
|
|
#else
|
|
|
|
|
static int ewrk3_debug = 1;
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define EWRK3_NDA 0xffe0 /* No Device Address */
|
|
|
|
|
|
|
|
|
|
#define PROBE_LENGTH 32
|
|
|
|
|
#define ETH_PROM_SIG 0xAA5500FFUL
|
|
|
|
|
|
|
|
|
|
#ifndef EWRK3_SIGNATURE
|
|
|
|
|
#define EWRK3_SIGNATURE {"DE203","DE204","DE205",""}
|
|
|
|
|
#define EWRK3_STRLEN 8
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef EWRK3_RAM_BASE_ADDRESSES
|
|
|
|
|
#define EWRK3_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0x00000}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Sets up the I/O area for the autoprobe.
|
|
|
|
|
*/
|
|
|
|
|
#define EWRK3_IO_BASE 0x100 /* Start address for probe search */
|
|
|
|
|
#define EWRK3_IOP_INC 0x20 /* I/O address increment */
|
|
|
|
|
#define EWRK3_TOTAL_SIZE 0x20 /* required I/O address length */
|
|
|
|
|
|
|
|
|
|
#ifndef MAX_NUM_EWRK3S
|
|
|
|
|
#define MAX_NUM_EWRK3S 21
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef EWRK3_EISA_IO_PORTS
|
|
|
|
|
#define EWRK3_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#ifndef MAX_EISA_SLOTS
|
|
|
|
|
#define MAX_EISA_SLOTS 16
|
|
|
|
|
#define EISA_SLOT_INC 0x1000
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define QUEUE_PKT_TIMEOUT (1*HZ) /* Jiffies */
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** EtherWORKS 3 shared memory window sizes
|
|
|
|
|
*/
|
|
|
|
|
#define IO_ONLY 0x00
|
|
|
|
|
#define SHMEM_2K 0x800
|
|
|
|
|
#define SHMEM_32K 0x8000
|
|
|
|
|
#define SHMEM_64K 0x10000
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** EtherWORKS 3 IRQ ENABLE/DISABLE
|
|
|
|
|
*/
|
|
|
|
|
#define ENABLE_IRQs { \
|
|
|
|
|
icr |= lp->irq_mask;\
|
|
|
|
|
outb(icr, EWRK3_ICR); /* Enable the IRQs */\
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#define DISABLE_IRQs { \
|
|
|
|
|
icr = inb(EWRK3_ICR);\
|
|
|
|
|
icr &= ~lp->irq_mask;\
|
|
|
|
|
outb(icr, EWRK3_ICR); /* Disable the IRQs */\
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** EtherWORKS 3 START/STOP
|
|
|
|
|
*/
|
|
|
|
|
#define START_EWRK3 { \
|
|
|
|
|
csr = inb(EWRK3_CSR);\
|
|
|
|
|
csr &= ~(CSR_TXD|CSR_RXD);\
|
|
|
|
|
outb(csr, EWRK3_CSR); /* Enable the TX and/or RX */\
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#define STOP_EWRK3 { \
|
|
|
|
|
csr = (CSR_TXD|CSR_RXD);\
|
|
|
|
|
outb(csr, EWRK3_CSR); /* Disable the TX and/or RX */\
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** The EtherWORKS 3 private structure
|
|
|
|
|
*/
|
|
|
|
|
#define EWRK3_PKT_STAT_SZ 16
|
|
|
|
|
#define EWRK3_PKT_BIN_SZ 128 /* Should be >=100 unless you
|
|
|
|
|
increase EWRK3_PKT_STAT_SZ */
|
|
|
|
|
|
|
|
|
|
struct ewrk3_stats {
|
|
|
|
|
u32 bins[EWRK3_PKT_STAT_SZ];
|
|
|
|
|
u32 unicast;
|
|
|
|
|
u32 multicast;
|
|
|
|
|
u32 broadcast;
|
|
|
|
|
u32 excessive_collisions;
|
|
|
|
|
u32 tx_underruns;
|
|
|
|
|
u32 excessive_underruns;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
struct ewrk3_private {
|
|
|
|
|
char adapter_name[80]; /* Name exported to /proc/ioports */
|
|
|
|
|
u_long shmem_base; /* Shared memory start address */
|
|
|
|
|
void __iomem *shmem;
|
|
|
|
|
u_long shmem_length; /* Shared memory window length */
|
|
|
|
|
struct net_device_stats stats; /* Public stats */
|
|
|
|
|
struct ewrk3_stats pktStats; /* Private stats counters */
|
|
|
|
|
u_char irq_mask; /* Adapter IRQ mask bits */
|
|
|
|
|
u_char mPage; /* Maximum 2kB Page number */
|
|
|
|
|
u_char lemac; /* Chip rev. level */
|
|
|
|
|
u_char hard_strapped; /* Don't allow a full open */
|
|
|
|
|
u_char txc; /* Transmit cut through */
|
|
|
|
|
void __iomem *mctbl; /* Pointer to the multicast table */
|
|
|
|
|
u_char led_mask; /* Used to reserve LED access for ethtool */
|
|
|
|
|
spinlock_t hw_lock;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Force the EtherWORKS 3 card to be in 2kB MODE
|
|
|
|
|
*/
|
|
|
|
|
#define FORCE_2K_MODE { \
|
|
|
|
|
shmem_length = SHMEM_2K;\
|
|
|
|
|
outb(((mem_start - 0x80000) >> 11), EWRK3_MBR);\
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Public Functions
|
|
|
|
|
*/
|
|
|
|
|
static int ewrk3_open(struct net_device *dev);
|
|
|
|
|
static int ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev);
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
|
|
|
static irqreturn_t ewrk3_interrupt(int irq, void *dev_id);
|
2005-04-16 18:20:36 -04:00
|
|
|
static int ewrk3_close(struct net_device *dev);
|
|
|
|
|
static struct net_device_stats *ewrk3_get_stats(struct net_device *dev);
|
|
|
|
|
static void set_multicast_list(struct net_device *dev);
|
|
|
|
|
static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
2006-09-13 14:30:00 -04:00
|
|
|
static const struct ethtool_ops ethtool_ops_203;
|
|
|
|
|
static const struct ethtool_ops ethtool_ops;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Private functions
|
|
|
|
|
*/
|
|
|
|
|
static int ewrk3_hw_init(struct net_device *dev, u_long iobase);
|
|
|
|
|
static void ewrk3_init(struct net_device *dev);
|
|
|
|
|
static int ewrk3_rx(struct net_device *dev);
|
|
|
|
|
static int ewrk3_tx(struct net_device *dev);
|
|
|
|
|
static void ewrk3_timeout(struct net_device *dev);
|
|
|
|
|
|
|
|
|
|
static void EthwrkSignature(char *name, char *eeprom_image);
|
|
|
|
|
static int DevicePresent(u_long iobase);
|
|
|
|
|
static void SetMulticastFilter(struct net_device *dev);
|
|
|
|
|
static int EISA_signature(char *name, s32 eisa_id);
|
|
|
|
|
|
|
|
|
|
static int Read_EEPROM(u_long iobase, u_char eaddr);
|
|
|
|
|
static int Write_EEPROM(short data, u_long iobase, u_char eaddr);
|
|
|
|
|
static u_char get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType);
|
|
|
|
|
|
|
|
|
|
static int ewrk3_probe1(struct net_device *dev, u_long iobase, int irq);
|
|
|
|
|
static int isa_probe(struct net_device *dev, u_long iobase);
|
|
|
|
|
static int eisa_probe(struct net_device *dev, u_long iobase);
|
|
|
|
|
|
|
|
|
|
static u_char irq[MAX_NUM_EWRK3S+1] = {5, 0, 10, 3, 11, 9, 15, 12};
|
|
|
|
|
|
|
|
|
|
static char name[EWRK3_STRLEN + 1];
|
|
|
|
|
static int num_ewrks3s;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Miscellaneous defines...
|
|
|
|
|
*/
|
|
|
|
|
#define INIT_EWRK3 {\
|
|
|
|
|
outb(EEPROM_INIT, EWRK3_IOPR);\
|
|
|
|
|
mdelay(1);\
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#ifndef MODULE
|
|
|
|
|
struct net_device * __init ewrk3_probe(int unit)
|
|
|
|
|
{
|
|
|
|
|
struct net_device *dev = alloc_etherdev(sizeof(struct ewrk3_private));
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
if (!dev)
|
|
|
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
|
|
|
|
|
|
if (unit >= 0) {
|
|
|
|
|
sprintf(dev->name, "eth%d", unit);
|
|
|
|
|
netdev_boot_setup_check(dev);
|
|
|
|
|
}
|
|
|
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
|
|
|
|
|
|
err = ewrk3_probe1(dev, dev->base_addr, dev->irq);
|
2006-09-13 13:24:59 -04:00
|
|
|
if (err)
|
2005-04-16 18:20:36 -04:00
|
|
|
goto out;
|
|
|
|
|
return dev;
|
|
|
|
|
out:
|
|
|
|
|
free_netdev(dev);
|
|
|
|
|
return ERR_PTR(err);
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
}
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq)
|
|
|
|
|
{
|
|
|
|
|
int err;
|
|
|
|
|
|
|
|
|
|
dev->base_addr = iobase;
|
|
|
|
|
dev->irq = irq;
|
|
|
|
|
|
|
|
|
|
/* Address PROM pattern */
|
|
|
|
|
err = isa_probe(dev, iobase);
|
2006-09-13 13:24:59 -04:00
|
|
|
if (err != 0)
|
2005-04-16 18:20:36 -04:00
|
|
|
err = eisa_probe(dev, iobase);
|
|
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
|
return err;
|
|
|
|
|
|
|
|
|
|
err = register_netdev(dev);
|
|
|
|
|
if (err)
|
|
|
|
|
release_region(dev->base_addr, EWRK3_TOTAL_SIZE);
|
|
|
|
|
|
|
|
|
|
return err;
|
|
|
|
|
}
|
|
|
|
|
|
2006-09-13 13:24:59 -04:00
|
|
|
static int __init
|
2005-04-16 18:20:36 -04:00
|
|
|
ewrk3_hw_init(struct net_device *dev, u_long iobase)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp;
|
|
|
|
|
int i, status = 0;
|
|
|
|
|
u_long mem_start, shmem_length;
|
|
|
|
|
u_char cr, cmr, icr, nicsr, lemac, hard_strapped = 0;
|
|
|
|
|
u_char eeprom_image[EEPROM_MAX], chksum, eisa_cr = 0;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Stop the EWRK3. Enable the DBR ROM. Disable interrupts and remote boot.
|
|
|
|
|
** This also disables the EISA_ENABLE bit in the EISA Control Register.
|
|
|
|
|
*/
|
|
|
|
|
if (iobase > 0x400)
|
|
|
|
|
eisa_cr = inb(EISA_CR);
|
|
|
|
|
INIT_EWRK3;
|
|
|
|
|
|
|
|
|
|
nicsr = inb(EWRK3_CSR);
|
|
|
|
|
|
|
|
|
|
icr = inb(EWRK3_ICR);
|
|
|
|
|
icr &= 0x70;
|
|
|
|
|
outb(icr, EWRK3_ICR); /* Disable all the IRQs */
|
|
|
|
|
|
2007-03-23 02:03:29 -04:00
|
|
|
if (nicsr != (CSR_TXD | CSR_RXD))
|
2005-04-16 18:20:36 -04:00
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
|
|
/* Check that the EEPROM is alive and well and not living on Pluto... */
|
|
|
|
|
for (chksum = 0, i = 0; i < EEPROM_MAX; i += 2) {
|
|
|
|
|
union {
|
|
|
|
|
short val;
|
|
|
|
|
char c[2];
|
|
|
|
|
} tmp;
|
|
|
|
|
|
|
|
|
|
tmp.val = (short) Read_EEPROM(iobase, (i >> 1));
|
|
|
|
|
eeprom_image[i] = tmp.c[0];
|
|
|
|
|
eeprom_image[i + 1] = tmp.c[1];
|
|
|
|
|
chksum += eeprom_image[i] + eeprom_image[i + 1];
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (chksum != 0) { /* Bad EEPROM Data! */
|
|
|
|
|
printk("%s: Device has a bad on-board EEPROM.\n", dev->name);
|
|
|
|
|
return -ENXIO;
|
|
|
|
|
}
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
EthwrkSignature(name, eeprom_image);
|
2006-09-13 13:24:59 -04:00
|
|
|
if (*name == '\0')
|
2005-04-16 18:20:36 -04:00
|
|
|
return -ENXIO;
|
|
|
|
|
|
|
|
|
|
dev->base_addr = iobase;
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (iobase > 0x400) {
|
|
|
|
|
outb(eisa_cr, EISA_CR); /* Rewrite the EISA CR */
|
|
|
|
|
}
|
|
|
|
|
lemac = eeprom_image[EEPROM_CHIPVER];
|
|
|
|
|
cmr = inb(EWRK3_CMR);
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (((lemac == LeMAC) && ((cmr & CMR_NO_EEPROM) != CMR_NO_EEPROM)) ||
|
|
|
|
|
((lemac == LeMAC2) && !(cmr & CMR_HS))) {
|
|
|
|
|
printk("%s: %s at %#4lx", dev->name, name, iobase);
|
|
|
|
|
hard_strapped = 1;
|
|
|
|
|
} else if ((iobase & 0x0fff) == EWRK3_EISA_IO_PORTS) {
|
|
|
|
|
/* EISA slot address */
|
|
|
|
|
printk("%s: %s at %#4lx (EISA slot %ld)",
|
|
|
|
|
dev->name, name, iobase, ((iobase >> 12) & 0x0f));
|
|
|
|
|
} else { /* ISA port address */
|
|
|
|
|
printk("%s: %s at %#4lx", dev->name, name, iobase);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
printk(", h/w address ");
|
|
|
|
|
if (lemac != LeMAC2)
|
|
|
|
|
DevicePresent(iobase); /* need after EWRK3_INIT */
|
|
|
|
|
status = get_hw_addr(dev, eeprom_image, lemac);
|
|
|
|
|
for (i = 0; i < ETH_ALEN - 1; i++) { /* get the ethernet addr. */
|
|
|
|
|
printk("%2.2x:", dev->dev_addr[i]);
|
|
|
|
|
}
|
|
|
|
|
printk("%2.2x,\n", dev->dev_addr[i]);
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (status) {
|
|
|
|
|
printk(" which has an EEPROM CRC error.\n");
|
|
|
|
|
return -ENXIO;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (lemac == LeMAC2) { /* Special LeMAC2 CMR things */
|
|
|
|
|
cmr &= ~(CMR_RA | CMR_WB | CMR_LINK | CMR_POLARITY | CMR_0WS);
|
|
|
|
|
if (eeprom_image[EEPROM_MISC0] & READ_AHEAD)
|
|
|
|
|
cmr |= CMR_RA;
|
|
|
|
|
if (eeprom_image[EEPROM_MISC0] & WRITE_BEHIND)
|
|
|
|
|
cmr |= CMR_WB;
|
|
|
|
|
if (eeprom_image[EEPROM_NETMAN0] & NETMAN_POL)
|
|
|
|
|
cmr |= CMR_POLARITY;
|
|
|
|
|
if (eeprom_image[EEPROM_NETMAN0] & NETMAN_LINK)
|
|
|
|
|
cmr |= CMR_LINK;
|
|
|
|
|
if (eeprom_image[EEPROM_MISC0] & _0WS_ENA)
|
|
|
|
|
cmr |= CMR_0WS;
|
|
|
|
|
}
|
|
|
|
|
if (eeprom_image[EEPROM_SETUP] & SETUP_DRAM)
|
|
|
|
|
cmr |= CMR_DRAM;
|
|
|
|
|
outb(cmr, EWRK3_CMR);
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
cr = inb(EWRK3_CR); /* Set up the Control Register */
|
|
|
|
|
cr |= eeprom_image[EEPROM_SETUP] & SETUP_APD;
|
|
|
|
|
if (cr & SETUP_APD)
|
|
|
|
|
cr |= eeprom_image[EEPROM_SETUP] & SETUP_PS;
|
|
|
|
|
cr |= eeprom_image[EEPROM_MISC0] & FAST_BUS;
|
|
|
|
|
cr |= eeprom_image[EEPROM_MISC0] & ENA_16;
|
|
|
|
|
outb(cr, EWRK3_CR);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Determine the base address and window length for the EWRK3
|
|
|
|
|
** RAM from the memory base register.
|
|
|
|
|
*/
|
|
|
|
|
mem_start = inb(EWRK3_MBR);
|
|
|
|
|
shmem_length = 0;
|
|
|
|
|
if (mem_start != 0) {
|
|
|
|
|
if ((mem_start >= 0x0a) && (mem_start <= 0x0f)) {
|
|
|
|
|
mem_start *= SHMEM_64K;
|
|
|
|
|
shmem_length = SHMEM_64K;
|
|
|
|
|
} else if ((mem_start >= 0x14) && (mem_start <= 0x1f)) {
|
|
|
|
|
mem_start *= SHMEM_32K;
|
|
|
|
|
shmem_length = SHMEM_32K;
|
|
|
|
|
} else if ((mem_start >= 0x40) && (mem_start <= 0xff)) {
|
|
|
|
|
mem_start = mem_start * SHMEM_2K + 0x80000;
|
|
|
|
|
shmem_length = SHMEM_2K;
|
|
|
|
|
} else {
|
|
|
|
|
return -ENXIO;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
/*
|
|
|
|
|
** See the top of this source code for comments about
|
|
|
|
|
** uncommenting this line.
|
|
|
|
|
*/
|
|
|
|
|
/* FORCE_2K_MODE; */
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (hard_strapped) {
|
|
|
|
|
printk(" is hard strapped.\n");
|
|
|
|
|
} else if (mem_start) {
|
|
|
|
|
printk(" has a %dk RAM window", (int) (shmem_length >> 10));
|
|
|
|
|
printk(" at 0x%.5lx", mem_start);
|
|
|
|
|
} else {
|
|
|
|
|
printk(" is in I/O only mode");
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
lp = netdev_priv(dev);
|
|
|
|
|
lp->shmem_base = mem_start;
|
|
|
|
|
lp->shmem = ioremap(mem_start, shmem_length);
|
|
|
|
|
if (!lp->shmem)
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
lp->shmem_length = shmem_length;
|
|
|
|
|
lp->lemac = lemac;
|
|
|
|
|
lp->hard_strapped = hard_strapped;
|
|
|
|
|
lp->led_mask = CR_LED;
|
|
|
|
|
spin_lock_init(&lp->hw_lock);
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
lp->mPage = 64;
|
|
|
|
|
if (cmr & CMR_DRAM)
|
|
|
|
|
lp->mPage <<= 1; /* 2 DRAMS on module */
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
sprintf(lp->adapter_name, "%s (%s)", name, dev->name);
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
lp->irq_mask = ICR_TNEM | ICR_TXDM | ICR_RNEM | ICR_RXDM;
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (!hard_strapped) {
|
|
|
|
|
/*
|
|
|
|
|
** Enable EWRK3 board interrupts for autoprobing
|
|
|
|
|
*/
|
|
|
|
|
icr |= ICR_IE; /* Enable interrupts */
|
|
|
|
|
outb(icr, EWRK3_ICR);
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* The DMA channel may be passed in on this parameter. */
|
|
|
|
|
dev->dma = 0;
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/* To auto-IRQ we enable the initialization-done and DMA err,
|
|
|
|
|
interrupts. For now we will always get a DMA error. */
|
|
|
|
|
if (dev->irq < 2) {
|
|
|
|
|
#ifndef MODULE
|
|
|
|
|
u_char irqnum;
|
|
|
|
|
unsigned long irq_mask;
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
|
irq_mask = probe_irq_on();
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
/*
|
|
|
|
|
** Trigger a TNE interrupt.
|
|
|
|
|
*/
|
|
|
|
|
icr |= ICR_TNEM;
|
|
|
|
|
outb(1, EWRK3_TDQ); /* Write to the TX done queue */
|
|
|
|
|
outb(icr, EWRK3_ICR); /* Unmask the TXD interrupt */
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
irqnum = irq[((icr & IRQ_SEL) >> 4)];
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
mdelay(20);
|
|
|
|
|
dev->irq = probe_irq_off(irq_mask);
|
|
|
|
|
if ((dev->irq) && (irqnum == dev->irq)) {
|
|
|
|
|
printk(" and uses IRQ%d.\n", dev->irq);
|
|
|
|
|
} else {
|
|
|
|
|
if (!dev->irq) {
|
|
|
|
|
printk(" and failed to detect IRQ line.\n");
|
|
|
|
|
} else if ((irqnum == 1) && (lemac == LeMAC2)) {
|
|
|
|
|
printk(" and an illegal IRQ line detected.\n");
|
|
|
|
|
} else {
|
|
|
|
|
printk(", but incorrect IRQ line detected.\n");
|
|
|
|
|
}
|
|
|
|
|
iounmap(lp->shmem);
|
|
|
|
|
return -ENXIO;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
DISABLE_IRQs; /* Mask all interrupts */
|
|
|
|
|
|
|
|
|
|
#endif /* MODULE */
|
|
|
|
|
} else {
|
|
|
|
|
printk(" and requires IRQ%d.\n", dev->irq);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (ewrk3_debug > 1) {
|
|
|
|
|
printk(version);
|
|
|
|
|
}
|
|
|
|
|
/* The EWRK3-specific entries in the device structure. */
|
|
|
|
|
dev->open = ewrk3_open;
|
|
|
|
|
dev->hard_start_xmit = ewrk3_queue_pkt;
|
|
|
|
|
dev->stop = ewrk3_close;
|
|
|
|
|
dev->get_stats = ewrk3_get_stats;
|
|
|
|
|
dev->set_multicast_list = set_multicast_list;
|
|
|
|
|
dev->do_ioctl = ewrk3_ioctl;
|
|
|
|
|
if (lp->adapter_name[4] == '3')
|
|
|
|
|
SET_ETHTOOL_OPS(dev, ðtool_ops_203);
|
|
|
|
|
else
|
|
|
|
|
SET_ETHTOOL_OPS(dev, ðtool_ops);
|
|
|
|
|
dev->tx_timeout = ewrk3_timeout;
|
|
|
|
|
dev->watchdog_timeo = QUEUE_PKT_TIMEOUT;
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
dev->mem_start = 0;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
|
static int ewrk3_open(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
u_long iobase = dev->base_addr;
|
|
|
|
|
int i, status = 0;
|
|
|
|
|
u_char icr, csr;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Stop the TX and RX...
|
|
|
|
|
*/
|
|
|
|
|
STOP_EWRK3;
|
|
|
|
|
|
|
|
|
|
if (!lp->hard_strapped) {
|
|
|
|
|
if (request_irq(dev->irq, (void *) ewrk3_interrupt, 0, "ewrk3", dev)) {
|
|
|
|
|
printk("ewrk3_open(): Requested IRQ%d is busy\n", dev->irq);
|
|
|
|
|
status = -EAGAIN;
|
|
|
|
|
} else {
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Re-initialize the EWRK3...
|
|
|
|
|
*/
|
|
|
|
|
ewrk3_init(dev);
|
|
|
|
|
|
|
|
|
|
if (ewrk3_debug > 1) {
|
|
|
|
|
printk("%s: ewrk3 open with irq %d\n", dev->name, dev->irq);
|
|
|
|
|
printk(" physical address: ");
|
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
|
|
|
printk("%2.2x:", (u_char) dev->dev_addr[i]);
|
|
|
|
|
}
|
|
|
|
|
printk("%2.2x\n", (u_char) dev->dev_addr[i]);
|
|
|
|
|
if (lp->shmem_length == 0) {
|
|
|
|
|
printk(" no shared memory, I/O only mode\n");
|
|
|
|
|
} else {
|
|
|
|
|
printk(" start of shared memory: 0x%08lx\n", lp->shmem_base);
|
|
|
|
|
printk(" window length: 0x%04lx\n", lp->shmem_length);
|
|
|
|
|
}
|
|
|
|
|
printk(" # of DRAMS: %d\n", ((inb(EWRK3_CMR) & 0x02) ? 2 : 1));
|
|
|
|
|
printk(" csr: 0x%02x\n", inb(EWRK3_CSR));
|
|
|
|
|
printk(" cr: 0x%02x\n", inb(EWRK3_CR));
|
|
|
|
|
printk(" icr: 0x%02x\n", inb(EWRK3_ICR));
|
|
|
|
|
printk(" cmr: 0x%02x\n", inb(EWRK3_CMR));
|
|
|
|
|
printk(" fmqc: 0x%02x\n", inb(EWRK3_FMQC));
|
|
|
|
|
}
|
|
|
|
|
netif_start_queue(dev);
|
|
|
|
|
/*
|
|
|
|
|
** Unmask EWRK3 board interrupts
|
|
|
|
|
*/
|
|
|
|
|
icr = inb(EWRK3_ICR);
|
|
|
|
|
ENABLE_IRQs;
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
printk(KERN_ERR "%s: ewrk3 available for hard strapped set up only.\n", dev->name);
|
|
|
|
|
printk(KERN_ERR " Run the 'ewrk3setup' utility or remove the hard straps.\n");
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return status;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Initialize the EtherWORKS 3 operating conditions
|
|
|
|
|
*/
|
|
|
|
|
static void ewrk3_init(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
u_char csr, page;
|
|
|
|
|
u_long iobase = dev->base_addr;
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Enable any multicasts
|
|
|
|
|
*/
|
|
|
|
|
set_multicast_list(dev);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Set hardware MAC address. Address is initialized from the EEPROM
|
|
|
|
|
** during startup but may have since been changed by the user.
|
|
|
|
|
*/
|
|
|
|
|
for (i=0; i<ETH_ALEN; i++)
|
|
|
|
|
outb(dev->dev_addr[i], EWRK3_PAR0 + i);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Clean out any remaining entries in all the queues here
|
|
|
|
|
*/
|
|
|
|
|
while (inb(EWRK3_TQ));
|
|
|
|
|
while (inb(EWRK3_TDQ));
|
|
|
|
|
while (inb(EWRK3_RQ));
|
|
|
|
|
while (inb(EWRK3_FMQ));
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Write a clean free memory queue
|
|
|
|
|
*/
|
|
|
|
|
for (page = 1; page < lp->mPage; page++) { /* Write the free page numbers */
|
|
|
|
|
outb(page, EWRK3_FMQ); /* to the Free Memory Queue */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
START_EWRK3; /* Enable the TX and/or RX */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Transmit timeout
|
|
|
|
|
*/
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
static void ewrk3_timeout(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
u_char icr, csr;
|
|
|
|
|
u_long iobase = dev->base_addr;
|
2006-09-13 13:24:59 -04:00
|
|
|
|
|
|
|
|
if (!lp->hard_strapped)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
|
printk(KERN_WARNING"%s: transmit timed/locked out, status %04x, resetting.\n",
|
|
|
|
|
dev->name, inb(EWRK3_CSR));
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Mask all board interrupts
|
|
|
|
|
*/
|
|
|
|
|
DISABLE_IRQs;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Stop the TX and RX...
|
|
|
|
|
*/
|
|
|
|
|
STOP_EWRK3;
|
|
|
|
|
|
|
|
|
|
ewrk3_init(dev);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Unmask EWRK3 board interrupts
|
|
|
|
|
*/
|
|
|
|
|
ENABLE_IRQs;
|
|
|
|
|
|
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Writes a socket buffer to the free page queue
|
|
|
|
|
*/
|
|
|
|
|
static int ewrk3_queue_pkt (struct sk_buff *skb, struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
u_long iobase = dev->base_addr;
|
|
|
|
|
void __iomem *buf = NULL;
|
|
|
|
|
u_char icr;
|
|
|
|
|
u_char page;
|
|
|
|
|
|
|
|
|
|
spin_lock_irq (&lp->hw_lock);
|
|
|
|
|
DISABLE_IRQs;
|
|
|
|
|
|
|
|
|
|
/* if no resources available, exit, request packet be queued */
|
|
|
|
|
if (inb (EWRK3_FMQC) == 0) {
|
|
|
|
|
printk (KERN_WARNING "%s: ewrk3_queue_pkt(): No free resources...\n",
|
|
|
|
|
dev->name);
|
|
|
|
|
printk (KERN_WARNING "%s: ewrk3_queue_pkt(): CSR: %02x ICR: %02x FMQC: %02x\n",
|
|
|
|
|
dev->name, inb (EWRK3_CSR), inb (EWRK3_ICR),
|
|
|
|
|
inb (EWRK3_FMQC));
|
|
|
|
|
goto err_out;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Get a free page from the FMQ
|
|
|
|
|
*/
|
|
|
|
|
if ((page = inb (EWRK3_FMQ)) >= lp->mPage) {
|
|
|
|
|
printk ("ewrk3_queue_pkt(): Invalid free memory page (%d).\n",
|
|
|
|
|
(u_char) page);
|
|
|
|
|
goto err_out;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Set up shared memory window and pointer into the window
|
|
|
|
|
*/
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
outb (page, EWRK3_IOPR);
|
|
|
|
|
} else if (lp->shmem_length == SHMEM_2K) {
|
|
|
|
|
buf = lp->shmem;
|
|
|
|
|
outb (page, EWRK3_MPR);
|
|
|
|
|
} else if (lp->shmem_length == SHMEM_32K) {
|
|
|
|
|
buf = (((short) page << 11) & 0x7800) + lp->shmem;
|
|
|
|
|
outb ((page >> 4), EWRK3_MPR);
|
|
|
|
|
} else if (lp->shmem_length == SHMEM_64K) {
|
|
|
|
|
buf = (((short) page << 11) & 0xf800) + lp->shmem;
|
|
|
|
|
outb ((page >> 5), EWRK3_MPR);
|
|
|
|
|
} else {
|
|
|
|
|
printk (KERN_ERR "%s: Oops - your private data area is hosed!\n",
|
|
|
|
|
dev->name);
|
|
|
|
|
BUG ();
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Set up the buffer control structures and copy the data from
|
|
|
|
|
** the socket buffer to the shared memory .
|
|
|
|
|
*/
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
int i;
|
|
|
|
|
u_char *p = skb->data;
|
|
|
|
|
outb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), EWRK3_DATA);
|
|
|
|
|
outb ((char) (skb->len & 0xff), EWRK3_DATA);
|
|
|
|
|
outb ((char) ((skb->len >> 8) & 0xff), EWRK3_DATA);
|
|
|
|
|
outb ((char) 0x04, EWRK3_DATA);
|
|
|
|
|
for (i = 0; i < skb->len; i++) {
|
|
|
|
|
outb (*p++, EWRK3_DATA);
|
|
|
|
|
}
|
|
|
|
|
outb (page, EWRK3_TQ); /* Start sending pkt */
|
|
|
|
|
} else {
|
|
|
|
|
writeb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), buf); /* ctrl byte */
|
|
|
|
|
buf += 1;
|
|
|
|
|
writeb ((char) (skb->len & 0xff), buf); /* length (16 bit xfer) */
|
|
|
|
|
buf += 1;
|
|
|
|
|
if (lp->txc) {
|
|
|
|
|
writeb(((skb->len >> 8) & 0xff) | XCT, buf);
|
|
|
|
|
buf += 1;
|
|
|
|
|
writeb (0x04, buf); /* index byte */
|
|
|
|
|
buf += 1;
|
|
|
|
|
writeb (0x00, (buf + skb->len)); /* Write the XCT flag */
|
|
|
|
|
memcpy_toio (buf, skb->data, PRELOAD); /* Write PRELOAD bytes */
|
|
|
|
|
outb (page, EWRK3_TQ); /* Start sending pkt */
|
|
|
|
|
memcpy_toio (buf + PRELOAD,
|
|
|
|
|
skb->data + PRELOAD,
|
|
|
|
|
skb->len - PRELOAD);
|
|
|
|
|
writeb (0xff, (buf + skb->len)); /* Write the XCT flag */
|
|
|
|
|
} else {
|
|
|
|
|
writeb ((skb->len >> 8) & 0xff, buf);
|
|
|
|
|
buf += 1;
|
|
|
|
|
writeb (0x04, buf); /* index byte */
|
|
|
|
|
buf += 1;
|
|
|
|
|
memcpy_toio (buf, skb->data, skb->len); /* Write data bytes */
|
|
|
|
|
outb (page, EWRK3_TQ); /* Start sending pkt */
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ENABLE_IRQs;
|
|
|
|
|
spin_unlock_irq (&lp->hw_lock);
|
|
|
|
|
|
|
|
|
|
lp->stats.tx_bytes += skb->len;
|
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
|
dev_kfree_skb (skb);
|
|
|
|
|
|
|
|
|
|
/* Check for free resources: stop Tx queue if there are none */
|
|
|
|
|
if (inb (EWRK3_FMQC) == 0)
|
|
|
|
|
netif_stop_queue (dev);
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
|
|
err_out:
|
|
|
|
|
ENABLE_IRQs;
|
|
|
|
|
spin_unlock_irq (&lp->hw_lock);
|
|
|
|
|
return 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** The EWRK3 interrupt handler.
|
|
|
|
|
*/
|
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.
The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around. On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).
Where appropriate, an arch may override the generic storage facility and do
something different with the variable. On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.
Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions. Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller. A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.
I've build this code with allyesconfig for x86_64 and i386. I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.
This will affect all archs. Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:
struct pt_regs *old_regs = set_irq_regs(regs);
And put the old one back at the end:
set_irq_regs(old_regs);
Don't pass regs through to generic_handle_irq() or __do_IRQ().
In timer_interrupt(), this sort of change will be necessary:
- update_process_times(user_mode(regs));
- profile_tick(CPU_PROFILING, regs);
+ update_process_times(user_mode(get_irq_regs()));
+ profile_tick(CPU_PROFILING);
I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().
Some notes on the interrupt handling in the drivers:
(*) input_dev() is now gone entirely. The regs pointer is no longer stored in
the input_dev struct.
(*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does
something different depending on whether it's been supplied with a regs
pointer or not.
(*) Various IRQ handler function pointers have been moved to type
irq_handler_t.
Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 09:55:46 -04:00
|
|
|
static irqreturn_t ewrk3_interrupt(int irq, void *dev_id)
|
2005-04-16 18:20:36 -04:00
|
|
|
{
|
|
|
|
|
struct net_device *dev = dev_id;
|
|
|
|
|
struct ewrk3_private *lp;
|
|
|
|
|
u_long iobase;
|
|
|
|
|
u_char icr, cr, csr;
|
|
|
|
|
|
|
|
|
|
lp = netdev_priv(dev);
|
|
|
|
|
iobase = dev->base_addr;
|
|
|
|
|
|
|
|
|
|
/* get the interrupt information */
|
|
|
|
|
csr = inb(EWRK3_CSR);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Mask the EWRK3 board interrupts and turn on the LED
|
|
|
|
|
*/
|
|
|
|
|
spin_lock(&lp->hw_lock);
|
|
|
|
|
DISABLE_IRQs;
|
|
|
|
|
|
|
|
|
|
cr = inb(EWRK3_CR);
|
|
|
|
|
cr |= lp->led_mask;
|
|
|
|
|
outb(cr, EWRK3_CR);
|
|
|
|
|
|
|
|
|
|
if (csr & CSR_RNE) /* Rx interrupt (packet[s] arrived) */
|
|
|
|
|
ewrk3_rx(dev);
|
|
|
|
|
|
|
|
|
|
if (csr & CSR_TNE) /* Tx interrupt (packet sent) */
|
|
|
|
|
ewrk3_tx(dev);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Now deal with the TX/RX disable flags. These are set when there
|
|
|
|
|
** are no more resources. If resources free up then enable these
|
|
|
|
|
** interrupts, otherwise mask them - failure to do this will result
|
|
|
|
|
** in the system hanging in an interrupt loop.
|
|
|
|
|
*/
|
|
|
|
|
if (inb(EWRK3_FMQC)) { /* any resources available? */
|
|
|
|
|
lp->irq_mask |= ICR_TXDM | ICR_RXDM; /* enable the interrupt source */
|
|
|
|
|
csr &= ~(CSR_TXD | CSR_RXD); /* ensure restart of a stalled TX or RX */
|
|
|
|
|
outb(csr, EWRK3_CSR);
|
|
|
|
|
netif_wake_queue(dev);
|
|
|
|
|
} else {
|
|
|
|
|
lp->irq_mask &= ~(ICR_TXDM | ICR_RXDM); /* disable the interrupt source */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Unmask the EWRK3 board interrupts and turn off the LED */
|
|
|
|
|
cr &= ~(lp->led_mask);
|
|
|
|
|
outb(cr, EWRK3_CR);
|
|
|
|
|
ENABLE_IRQs;
|
|
|
|
|
spin_unlock(&lp->hw_lock);
|
|
|
|
|
return IRQ_HANDLED;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Called with lp->hw_lock held */
|
|
|
|
|
static int ewrk3_rx(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
u_long iobase = dev->base_addr;
|
|
|
|
|
int i, status = 0;
|
|
|
|
|
u_char page;
|
|
|
|
|
void __iomem *buf = NULL;
|
|
|
|
|
|
|
|
|
|
while (inb(EWRK3_RQC) && !status) { /* Whilst there's incoming data */
|
|
|
|
|
if ((page = inb(EWRK3_RQ)) < lp->mPage) { /* Get next entry's buffer page */
|
|
|
|
|
/*
|
|
|
|
|
** Set up shared memory window and pointer into the window
|
|
|
|
|
*/
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
outb(page, EWRK3_IOPR);
|
|
|
|
|
} else if (lp->shmem_length == SHMEM_2K) {
|
|
|
|
|
buf = lp->shmem;
|
|
|
|
|
outb(page, EWRK3_MPR);
|
|
|
|
|
} else if (lp->shmem_length == SHMEM_32K) {
|
|
|
|
|
buf = (((short) page << 11) & 0x7800) + lp->shmem;
|
|
|
|
|
outb((page >> 4), EWRK3_MPR);
|
|
|
|
|
} else if (lp->shmem_length == SHMEM_64K) {
|
|
|
|
|
buf = (((short) page << 11) & 0xf800) + lp->shmem;
|
|
|
|
|
outb((page >> 5), EWRK3_MPR);
|
|
|
|
|
} else {
|
|
|
|
|
status = -1;
|
|
|
|
|
printk("%s: Oops - your private data area is hosed!\n", dev->name);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (!status) {
|
|
|
|
|
char rx_status;
|
|
|
|
|
int pkt_len;
|
|
|
|
|
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
rx_status = inb(EWRK3_DATA);
|
|
|
|
|
pkt_len = inb(EWRK3_DATA);
|
|
|
|
|
pkt_len |= ((u_short) inb(EWRK3_DATA) << 8);
|
|
|
|
|
} else {
|
|
|
|
|
rx_status = readb(buf);
|
|
|
|
|
buf += 1;
|
|
|
|
|
pkt_len = readw(buf);
|
|
|
|
|
buf += 3;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (!(rx_status & R_ROK)) { /* There was an error. */
|
|
|
|
|
lp->stats.rx_errors++; /* Update the error stats. */
|
|
|
|
|
if (rx_status & R_DBE)
|
|
|
|
|
lp->stats.rx_frame_errors++;
|
|
|
|
|
if (rx_status & R_CRC)
|
|
|
|
|
lp->stats.rx_crc_errors++;
|
|
|
|
|
if (rx_status & R_PLL)
|
|
|
|
|
lp->stats.rx_fifo_errors++;
|
|
|
|
|
} else {
|
|
|
|
|
struct sk_buff *skb;
|
|
|
|
|
|
|
|
|
|
if ((skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
|
|
|
|
|
unsigned char *p;
|
|
|
|
|
skb_reserve(skb, 2); /* Align to 16 bytes */
|
|
|
|
|
p = skb_put(skb, pkt_len);
|
|
|
|
|
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
*p = inb(EWRK3_DATA); /* dummy read */
|
|
|
|
|
for (i = 0; i < pkt_len; i++) {
|
|
|
|
|
*p++ = inb(EWRK3_DATA);
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
memcpy_fromio(p, buf, pkt_len);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (i = 1; i < EWRK3_PKT_STAT_SZ - 1; i++) {
|
|
|
|
|
if (pkt_len < i * EWRK3_PKT_BIN_SZ) {
|
|
|
|
|
lp->pktStats.bins[i]++;
|
|
|
|
|
i = EWRK3_PKT_STAT_SZ;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
p = skb->data; /* Look at the dest addr */
|
|
|
|
|
if (p[0] & 0x01) { /* Multicast/Broadcast */
|
|
|
|
|
if ((*(s16 *) & p[0] == -1) && (*(s16 *) & p[2] == -1) && (*(s16 *) & p[4] == -1)) {
|
|
|
|
|
lp->pktStats.broadcast++;
|
|
|
|
|
} else {
|
|
|
|
|
lp->pktStats.multicast++;
|
|
|
|
|
}
|
|
|
|
|
} else if ((*(s16 *) & p[0] == *(s16 *) & dev->dev_addr[0]) &&
|
|
|
|
|
(*(s16 *) & p[2] == *(s16 *) & dev->dev_addr[2]) &&
|
|
|
|
|
(*(s16 *) & p[4] == *(s16 *) & dev->dev_addr[4])) {
|
|
|
|
|
lp->pktStats.unicast++;
|
|
|
|
|
}
|
|
|
|
|
lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */
|
|
|
|
|
if (lp->pktStats.bins[0] == 0) { /* Reset counters */
|
|
|
|
|
memset(&lp->pktStats, 0, sizeof(lp->pktStats));
|
|
|
|
|
}
|
|
|
|
|
/*
|
|
|
|
|
** Notify the upper protocol layers that there is another
|
|
|
|
|
** packet to handle
|
|
|
|
|
*/
|
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
|
netif_rx(skb);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Update stats
|
|
|
|
|
*/
|
|
|
|
|
dev->last_rx = jiffies;
|
|
|
|
|
lp->stats.rx_packets++;
|
|
|
|
|
lp->stats.rx_bytes += pkt_len;
|
|
|
|
|
} else {
|
|
|
|
|
printk("%s: Insufficient memory; nuking packet.\n", dev->name);
|
|
|
|
|
lp->stats.rx_dropped++; /* Really, deferred. */
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
/*
|
|
|
|
|
** Return the received buffer to the free memory queue
|
|
|
|
|
*/
|
|
|
|
|
outb(page, EWRK3_FMQ);
|
|
|
|
|
} else {
|
|
|
|
|
printk("ewrk3_rx(): Illegal page number, page %d\n", page);
|
|
|
|
|
printk("ewrk3_rx(): CSR: %02x ICR: %02x FMQC: %02x\n", inb(EWRK3_CSR), inb(EWRK3_ICR), inb(EWRK3_FMQC));
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
return status;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Buffer sent - check for TX buffer errors.
|
|
|
|
|
** Called with lp->hw_lock held
|
|
|
|
|
*/
|
|
|
|
|
static int ewrk3_tx(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
u_long iobase = dev->base_addr;
|
|
|
|
|
u_char tx_status;
|
|
|
|
|
|
|
|
|
|
while ((tx_status = inb(EWRK3_TDQ)) > 0) { /* Whilst there's old buffers */
|
|
|
|
|
if (tx_status & T_VSTS) { /* The status is valid */
|
|
|
|
|
if (tx_status & T_TXE) {
|
|
|
|
|
lp->stats.tx_errors++;
|
|
|
|
|
if (tx_status & T_NCL)
|
|
|
|
|
lp->stats.tx_carrier_errors++;
|
|
|
|
|
if (tx_status & T_LCL)
|
|
|
|
|
lp->stats.tx_window_errors++;
|
|
|
|
|
if (tx_status & T_CTU) {
|
|
|
|
|
if ((tx_status & T_COLL) ^ T_XUR) {
|
|
|
|
|
lp->pktStats.tx_underruns++;
|
|
|
|
|
} else {
|
|
|
|
|
lp->pktStats.excessive_underruns++;
|
|
|
|
|
}
|
|
|
|
|
} else if (tx_status & T_COLL) {
|
|
|
|
|
if ((tx_status & T_COLL) ^ T_XCOLL) {
|
|
|
|
|
lp->stats.collisions++;
|
|
|
|
|
} else {
|
|
|
|
|
lp->pktStats.excessive_collisions++;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
lp->stats.tx_packets++;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ewrk3_close(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
u_long iobase = dev->base_addr;
|
|
|
|
|
u_char icr, csr;
|
|
|
|
|
|
|
|
|
|
netif_stop_queue(dev);
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
if (ewrk3_debug > 1) {
|
|
|
|
|
printk("%s: Shutting down ethercard, status was %2.2x.\n",
|
|
|
|
|
dev->name, inb(EWRK3_CSR));
|
|
|
|
|
}
|
|
|
|
|
/*
|
|
|
|
|
** We stop the EWRK3 here... mask interrupts and stop TX & RX
|
|
|
|
|
*/
|
|
|
|
|
DISABLE_IRQs;
|
|
|
|
|
|
|
|
|
|
STOP_EWRK3;
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Clean out the TX and RX queues here (note that one entry
|
|
|
|
|
** may get added to either the TXD or RX queues if the TX or RX
|
|
|
|
|
** just starts processing a packet before the STOP_EWRK3 command
|
|
|
|
|
** is received. This will be flushed in the ewrk3_open() call).
|
|
|
|
|
*/
|
|
|
|
|
while (inb(EWRK3_TQ));
|
|
|
|
|
while (inb(EWRK3_TDQ));
|
|
|
|
|
while (inb(EWRK3_RQ));
|
|
|
|
|
|
|
|
|
|
if (!lp->hard_strapped) {
|
|
|
|
|
free_irq(dev->irq, dev);
|
|
|
|
|
}
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static struct net_device_stats *ewrk3_get_stats(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
|
|
|
|
|
/* Null body since there is no framing error counter */
|
|
|
|
|
return &lp->stats;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Set or clear the multicast filter for this adapter.
|
|
|
|
|
*/
|
|
|
|
|
static void set_multicast_list(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
u_long iobase = dev->base_addr;
|
|
|
|
|
u_char csr;
|
|
|
|
|
|
|
|
|
|
csr = inb(EWRK3_CSR);
|
|
|
|
|
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
lp->mctbl = NULL;
|
|
|
|
|
} else {
|
|
|
|
|
lp->mctbl = lp->shmem + PAGE0_HTE;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
csr &= ~(CSR_PME | CSR_MCE);
|
|
|
|
|
if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
|
|
|
|
|
csr |= CSR_PME;
|
|
|
|
|
outb(csr, EWRK3_CSR);
|
|
|
|
|
} else {
|
|
|
|
|
SetMulticastFilter(dev);
|
|
|
|
|
csr |= CSR_MCE;
|
|
|
|
|
outb(csr, EWRK3_CSR);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Calculate the hash code and update the logical address filter
|
|
|
|
|
** from a list of ethernet multicast addresses.
|
|
|
|
|
** Little endian crc one liner from Matt Thomas, DEC.
|
|
|
|
|
**
|
|
|
|
|
** Note that when clearing the table, the broadcast bit must remain asserted
|
|
|
|
|
** to receive broadcast messages.
|
|
|
|
|
*/
|
|
|
|
|
static void SetMulticastFilter(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
struct dev_mc_list *dmi = dev->mc_list;
|
|
|
|
|
u_long iobase = dev->base_addr;
|
|
|
|
|
int i;
|
|
|
|
|
char *addrs, bit, byte;
|
|
|
|
|
short __iomem *p = lp->mctbl;
|
|
|
|
|
u16 hashcode;
|
|
|
|
|
u32 crc;
|
|
|
|
|
|
|
|
|
|
spin_lock_irq(&lp->hw_lock);
|
|
|
|
|
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
outb(0, EWRK3_IOPR);
|
|
|
|
|
outw(PAGE0_HTE, EWRK3_PIR1);
|
|
|
|
|
} else {
|
|
|
|
|
outb(0, EWRK3_MPR);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (dev->flags & IFF_ALLMULTI) {
|
|
|
|
|
for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) {
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
outb(0xff, EWRK3_DATA);
|
|
|
|
|
} else { /* memset didn't work here */
|
|
|
|
|
writew(0xffff, p);
|
|
|
|
|
p++;
|
|
|
|
|
i++;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
/* Clear table except for broadcast bit */
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
for (i = 0; i < (HASH_TABLE_LEN >> 4) - 1; i++) {
|
|
|
|
|
outb(0x00, EWRK3_DATA);
|
|
|
|
|
}
|
|
|
|
|
outb(0x80, EWRK3_DATA);
|
|
|
|
|
i++; /* insert the broadcast bit */
|
|
|
|
|
for (; i < (HASH_TABLE_LEN >> 3); i++) {
|
|
|
|
|
outb(0x00, EWRK3_DATA);
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
memset_io(lp->mctbl, 0, HASH_TABLE_LEN >> 3);
|
|
|
|
|
writeb(0x80, lp->mctbl + (HASH_TABLE_LEN >> 4) - 1);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Update table */
|
|
|
|
|
for (i = 0; i < dev->mc_count; i++) { /* for each address in the list */
|
|
|
|
|
addrs = dmi->dmi_addr;
|
|
|
|
|
dmi = dmi->next;
|
|
|
|
|
if ((*addrs & 0x01) == 1) { /* multicast address? */
|
|
|
|
|
crc = ether_crc_le(ETH_ALEN, addrs);
|
|
|
|
|
hashcode = crc & ((1 << 9) - 1); /* hashcode is 9 LSb of CRC */
|
|
|
|
|
|
|
|
|
|
byte = hashcode >> 3; /* bit[3-8] -> byte in filter */
|
|
|
|
|
bit = 1 << (hashcode & 0x07); /* bit[0-2] -> bit in byte */
|
|
|
|
|
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
u_char tmp;
|
|
|
|
|
|
|
|
|
|
outw(PAGE0_HTE + byte, EWRK3_PIR1);
|
|
|
|
|
tmp = inb(EWRK3_DATA);
|
|
|
|
|
tmp |= bit;
|
|
|
|
|
outw(PAGE0_HTE + byte, EWRK3_PIR1);
|
|
|
|
|
outb(tmp, EWRK3_DATA);
|
|
|
|
|
} else {
|
|
|
|
|
writeb(readb(lp->mctbl + byte) | bit, lp->mctbl + byte);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
spin_unlock_irq(&lp->hw_lock);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** ISA bus I/O device probe
|
|
|
|
|
*/
|
|
|
|
|
static int __init isa_probe(struct net_device *dev, u_long ioaddr)
|
|
|
|
|
{
|
|
|
|
|
int i = num_ewrks3s, maxSlots;
|
|
|
|
|
int ret = -ENODEV;
|
|
|
|
|
|
|
|
|
|
u_long iobase;
|
|
|
|
|
|
|
|
|
|
if (ioaddr >= 0x400)
|
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
|
|
if (ioaddr == 0) { /* Autoprobing */
|
|
|
|
|
iobase = EWRK3_IO_BASE; /* Get the first slot address */
|
|
|
|
|
maxSlots = 24;
|
|
|
|
|
} else { /* Probe a specific location */
|
|
|
|
|
iobase = ioaddr;
|
|
|
|
|
maxSlots = i + 1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
for (; (i < maxSlots) && (dev != NULL);
|
|
|
|
|
iobase += EWRK3_IOP_INC, i++)
|
|
|
|
|
{
|
|
|
|
|
if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME)) {
|
|
|
|
|
if (DevicePresent(iobase) == 0) {
|
|
|
|
|
int irq = dev->irq;
|
|
|
|
|
ret = ewrk3_hw_init(dev, iobase);
|
|
|
|
|
if (!ret)
|
|
|
|
|
break;
|
|
|
|
|
dev->irq = irq;
|
|
|
|
|
}
|
|
|
|
|
release_region(iobase, EWRK3_TOTAL_SIZE);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
out:
|
|
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** EISA bus I/O device probe. Probe from slot 1 since slot 0 is usually
|
|
|
|
|
** the motherboard.
|
|
|
|
|
*/
|
|
|
|
|
static int __init eisa_probe(struct net_device *dev, u_long ioaddr)
|
|
|
|
|
{
|
|
|
|
|
int i, maxSlots;
|
|
|
|
|
u_long iobase;
|
|
|
|
|
int ret = -ENODEV;
|
|
|
|
|
|
|
|
|
|
if (ioaddr < 0x1000)
|
|
|
|
|
goto out;
|
|
|
|
|
|
2005-05-01 21:47:00 -04:00
|
|
|
iobase = ioaddr;
|
|
|
|
|
i = (ioaddr >> 12);
|
|
|
|
|
maxSlots = i + 1;
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
|
for (i = 1; (i < maxSlots) && (dev != NULL); i++, iobase += EISA_SLOT_INC) {
|
|
|
|
|
if (EISA_signature(name, EISA_ID) == 0) {
|
|
|
|
|
if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME) &&
|
|
|
|
|
DevicePresent(iobase) == 0) {
|
|
|
|
|
int irq = dev->irq;
|
|
|
|
|
ret = ewrk3_hw_init(dev, iobase);
|
|
|
|
|
if (!ret)
|
|
|
|
|
break;
|
|
|
|
|
dev->irq = irq;
|
|
|
|
|
}
|
|
|
|
|
release_region(iobase, EWRK3_TOTAL_SIZE);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
out:
|
|
|
|
|
return ret;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Read the EWRK3 EEPROM using this routine
|
|
|
|
|
*/
|
|
|
|
|
static int Read_EEPROM(u_long iobase, u_char eaddr)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */
|
|
|
|
|
outb(EEPROM_RD, EWRK3_IOPR); /* issue read command */
|
|
|
|
|
for (i = 0; i < 5000; i++)
|
|
|
|
|
inb(EWRK3_CSR); /* wait 1msec */
|
|
|
|
|
|
|
|
|
|
return inw(EWRK3_EPROM1); /* 16 bits data return */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Write the EWRK3 EEPROM using this routine
|
|
|
|
|
*/
|
|
|
|
|
static int Write_EEPROM(short data, u_long iobase, u_char eaddr)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
outb(EEPROM_WR_EN, EWRK3_IOPR); /* issue write enable command */
|
|
|
|
|
for (i = 0; i < 5000; i++)
|
|
|
|
|
inb(EWRK3_CSR); /* wait 1msec */
|
|
|
|
|
outw(data, EWRK3_EPROM1); /* write data to register */
|
|
|
|
|
outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */
|
|
|
|
|
outb(EEPROM_WR, EWRK3_IOPR); /* issue write command */
|
|
|
|
|
for (i = 0; i < 75000; i++)
|
|
|
|
|
inb(EWRK3_CSR); /* wait 15msec */
|
|
|
|
|
outb(EEPROM_WR_DIS, EWRK3_IOPR); /* issue write disable command */
|
|
|
|
|
for (i = 0; i < 5000; i++)
|
|
|
|
|
inb(EWRK3_CSR); /* wait 1msec */
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Look for a particular board name in the on-board EEPROM.
|
|
|
|
|
*/
|
|
|
|
|
static void __init EthwrkSignature(char *name, char *eeprom_image)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
char *signatures[] = EWRK3_SIGNATURE;
|
|
|
|
|
|
|
|
|
|
for (i=0; *signatures[i] != '\0'; i++)
|
|
|
|
|
if( !strncmp(eeprom_image+EEPROM_PNAME7, signatures[i], strlen(signatures[i])) )
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
if (*signatures[i] != '\0') {
|
|
|
|
|
memcpy(name, eeprom_image+EEPROM_PNAME7, EWRK3_STRLEN);
|
|
|
|
|
name[EWRK3_STRLEN] = '\0';
|
|
|
|
|
} else
|
|
|
|
|
name[0] = '\0';
|
|
|
|
|
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Look for a special sequence in the Ethernet station address PROM that
|
|
|
|
|
** is common across all EWRK3 products.
|
|
|
|
|
**
|
|
|
|
|
** Search the Ethernet address ROM for the signature. Since the ROM address
|
|
|
|
|
** counter can start at an arbitrary point, the search must include the entire
|
|
|
|
|
** probe sequence length plus the (length_of_the_signature - 1).
|
|
|
|
|
** Stop the search IMMEDIATELY after the signature is found so that the
|
|
|
|
|
** PROM address counter is correctly positioned at the start of the
|
|
|
|
|
** ethernet address for later read out.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
static int __init DevicePresent(u_long iobase)
|
|
|
|
|
{
|
|
|
|
|
union {
|
|
|
|
|
struct {
|
|
|
|
|
u32 a;
|
|
|
|
|
u32 b;
|
|
|
|
|
} llsig;
|
|
|
|
|
char Sig[sizeof(u32) << 1];
|
|
|
|
|
}
|
|
|
|
|
dev;
|
|
|
|
|
short sigLength;
|
|
|
|
|
char data;
|
|
|
|
|
int i, j, status = 0;
|
|
|
|
|
|
|
|
|
|
dev.llsig.a = ETH_PROM_SIG;
|
|
|
|
|
dev.llsig.b = ETH_PROM_SIG;
|
|
|
|
|
sigLength = sizeof(u32) << 1;
|
|
|
|
|
|
|
|
|
|
for (i = 0, j = 0; j < sigLength && i < PROBE_LENGTH + sigLength - 1; i++) {
|
|
|
|
|
data = inb(EWRK3_APROM);
|
|
|
|
|
if (dev.Sig[j] == data) { /* track signature */
|
|
|
|
|
j++;
|
|
|
|
|
} else { /* lost signature; begin search again */
|
|
|
|
|
if (data == dev.Sig[0]) {
|
|
|
|
|
j = 1;
|
|
|
|
|
} else {
|
|
|
|
|
j = 0;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if (j != sigLength) {
|
|
|
|
|
status = -ENODEV; /* search failed */
|
|
|
|
|
}
|
|
|
|
|
return status;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static u_char __init get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType)
|
|
|
|
|
{
|
|
|
|
|
int i, j, k;
|
|
|
|
|
u_short chksum;
|
|
|
|
|
u_char crc, lfsr, sd, status = 0;
|
|
|
|
|
u_long iobase = dev->base_addr;
|
|
|
|
|
u16 tmp;
|
|
|
|
|
|
|
|
|
|
if (chipType == LeMAC2) {
|
|
|
|
|
for (crc = 0x6a, j = 0; j < ETH_ALEN; j++) {
|
|
|
|
|
sd = dev->dev_addr[j] = eeprom_image[EEPROM_PADDR0 + j];
|
|
|
|
|
outb(dev->dev_addr[j], EWRK3_PAR0 + j);
|
|
|
|
|
for (k = 0; k < 8; k++, sd >>= 1) {
|
|
|
|
|
lfsr = ((((crc & 0x02) >> 1) ^ (crc & 0x01)) ^ (sd & 0x01)) << 7;
|
|
|
|
|
crc = (crc >> 1) + lfsr;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
if (crc != eeprom_image[EEPROM_PA_CRC])
|
|
|
|
|
status = -1;
|
|
|
|
|
} else {
|
|
|
|
|
for (i = 0, k = 0; i < ETH_ALEN;) {
|
|
|
|
|
k <<= 1;
|
|
|
|
|
if (k > 0xffff)
|
|
|
|
|
k -= 0xffff;
|
|
|
|
|
|
|
|
|
|
k += (u_char) (tmp = inb(EWRK3_APROM));
|
|
|
|
|
dev->dev_addr[i] = (u_char) tmp;
|
|
|
|
|
outb(dev->dev_addr[i], EWRK3_PAR0 + i);
|
|
|
|
|
i++;
|
|
|
|
|
k += (u_short) ((tmp = inb(EWRK3_APROM)) << 8);
|
|
|
|
|
dev->dev_addr[i] = (u_char) tmp;
|
|
|
|
|
outb(dev->dev_addr[i], EWRK3_PAR0 + i);
|
|
|
|
|
i++;
|
|
|
|
|
|
|
|
|
|
if (k > 0xffff)
|
|
|
|
|
k -= 0xffff;
|
|
|
|
|
}
|
|
|
|
|
if (k == 0xffff)
|
|
|
|
|
k = 0;
|
|
|
|
|
chksum = inb(EWRK3_APROM);
|
|
|
|
|
chksum |= (inb(EWRK3_APROM) << 8);
|
|
|
|
|
if (k != chksum)
|
|
|
|
|
status = -1;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return status;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Look for a particular board name in the EISA configuration space
|
|
|
|
|
*/
|
|
|
|
|
static int __init EISA_signature(char *name, s32 eisa_id)
|
|
|
|
|
{
|
|
|
|
|
u_long i;
|
|
|
|
|
char *signatures[] = EWRK3_SIGNATURE;
|
|
|
|
|
char ManCode[EWRK3_STRLEN];
|
|
|
|
|
union {
|
|
|
|
|
s32 ID;
|
|
|
|
|
char Id[4];
|
|
|
|
|
} Eisa;
|
|
|
|
|
int status = 0;
|
|
|
|
|
|
|
|
|
|
*name = '\0';
|
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
|
|
|
Eisa.Id[i] = inb(eisa_id + i);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ManCode[0] = (((Eisa.Id[0] >> 2) & 0x1f) + 0x40);
|
|
|
|
|
ManCode[1] = (((Eisa.Id[1] & 0xe0) >> 5) + ((Eisa.Id[0] & 0x03) << 3) + 0x40);
|
|
|
|
|
ManCode[2] = (((Eisa.Id[2] >> 4) & 0x0f) + 0x30);
|
|
|
|
|
ManCode[3] = ((Eisa.Id[2] & 0x0f) + 0x30);
|
|
|
|
|
ManCode[4] = (((Eisa.Id[3] >> 4) & 0x0f) + 0x30);
|
|
|
|
|
ManCode[5] = '\0';
|
|
|
|
|
|
|
|
|
|
for (i = 0; (*signatures[i] != '\0') && (*name == '\0'); i++) {
|
|
|
|
|
if (strstr(ManCode, signatures[i]) != NULL) {
|
|
|
|
|
strcpy(name, ManCode);
|
|
|
|
|
status = 1;
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return status; /* return the device name string */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void ewrk3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
|
|
|
{
|
|
|
|
|
int fwrev = Read_EEPROM(dev->base_addr, EEPROM_REVLVL);
|
|
|
|
|
|
|
|
|
|
strcpy(info->driver, DRV_NAME);
|
|
|
|
|
strcpy(info->version, DRV_VERSION);
|
|
|
|
|
sprintf(info->fw_version, "%d", fwrev);
|
|
|
|
|
strcpy(info->bus_info, "N/A");
|
|
|
|
|
info->eedump_len = EEPROM_MAX;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ewrk3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
unsigned long iobase = dev->base_addr;
|
|
|
|
|
u8 cr = inb(EWRK3_CR);
|
|
|
|
|
|
|
|
|
|
switch (lp->adapter_name[4]) {
|
|
|
|
|
case '3': /* DE203 */
|
|
|
|
|
ecmd->supported = SUPPORTED_BNC;
|
|
|
|
|
ecmd->port = PORT_BNC;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case '4': /* DE204 */
|
|
|
|
|
ecmd->supported = SUPPORTED_TP;
|
|
|
|
|
ecmd->port = PORT_TP;
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
case '5': /* DE205 */
|
|
|
|
|
ecmd->supported = SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_AUI;
|
|
|
|
|
ecmd->autoneg = !(cr & CR_APD);
|
|
|
|
|
/*
|
|
|
|
|
** Port is only valid if autoneg is disabled
|
|
|
|
|
** and even then we don't know if AUI is jumpered.
|
|
|
|
|
*/
|
|
|
|
|
if (!ecmd->autoneg)
|
|
|
|
|
ecmd->port = (cr & CR_PSEL) ? PORT_BNC : PORT_TP;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ecmd->supported |= SUPPORTED_10baseT_Half;
|
|
|
|
|
ecmd->speed = SPEED_10;
|
|
|
|
|
ecmd->duplex = DUPLEX_HALF;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ewrk3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
unsigned long iobase = dev->base_addr;
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
u8 cr;
|
|
|
|
|
|
|
|
|
|
/* DE205 is the only card with anything to set */
|
|
|
|
|
if (lp->adapter_name[4] != '5')
|
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
|
|
/* Sanity-check parameters */
|
|
|
|
|
if (ecmd->speed != SPEED_10)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
if (ecmd->port != PORT_TP && ecmd->port != PORT_BNC)
|
|
|
|
|
return -EINVAL; /* AUI is not software-selectable */
|
|
|
|
|
if (ecmd->transceiver != XCVR_INTERNAL)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
if (ecmd->duplex != DUPLEX_HALF)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
if (ecmd->phy_address != 0)
|
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
cr = inb(EWRK3_CR);
|
|
|
|
|
|
|
|
|
|
/* If Autoneg is set, change to Auto Port mode */
|
|
|
|
|
/* Otherwise, disable Auto Port and set port explicitly */
|
|
|
|
|
if (ecmd->autoneg) {
|
|
|
|
|
cr &= ~CR_APD;
|
|
|
|
|
} else {
|
|
|
|
|
cr |= CR_APD;
|
|
|
|
|
if (ecmd->port == PORT_TP)
|
|
|
|
|
cr &= ~CR_PSEL; /* Force TP */
|
|
|
|
|
else
|
|
|
|
|
cr |= CR_PSEL; /* Force BNC */
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Commit the changes */
|
|
|
|
|
outb(cr, EWRK3_CR);
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static u32 ewrk3_get_link(struct net_device *dev)
|
|
|
|
|
{
|
|
|
|
|
unsigned long iobase = dev->base_addr;
|
|
|
|
|
u8 cmr = inb(EWRK3_CMR);
|
|
|
|
|
/* DE203 has BNC only and link status does not apply */
|
|
|
|
|
/* On DE204 this is always valid since TP is the only port. */
|
|
|
|
|
/* On DE205 this reflects TP status even if BNC or AUI is selected. */
|
|
|
|
|
return !(cmr & CMR_LINK);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int ewrk3_phys_id(struct net_device *dev, u32 data)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
unsigned long iobase = dev->base_addr;
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
u8 cr;
|
|
|
|
|
int count;
|
|
|
|
|
|
|
|
|
|
/* Toggle LED 4x per second */
|
|
|
|
|
count = data << 2;
|
|
|
|
|
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
|
|
|
|
|
/* Bail if a PHYS_ID is already in progress */
|
|
|
|
|
if (lp->led_mask == 0) {
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
return -EBUSY;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Prevent ISR from twiddling the LED */
|
|
|
|
|
lp->led_mask = 0;
|
|
|
|
|
|
|
|
|
|
while (count--) {
|
|
|
|
|
/* Toggle the LED */
|
|
|
|
|
cr = inb(EWRK3_CR);
|
|
|
|
|
outb(cr ^ CR_LED, EWRK3_CR);
|
|
|
|
|
|
|
|
|
|
/* Wait a little while */
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
msleep(250);
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
|
|
|
|
|
/* Exit if we got a signal */
|
|
|
|
|
if (signal_pending(current))
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
lp->led_mask = CR_LED;
|
|
|
|
|
cr = inb(EWRK3_CR);
|
|
|
|
|
outb(cr & ~CR_LED, EWRK3_CR);
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
return signal_pending(current) ? -ERESTARTSYS : 0;
|
|
|
|
|
}
|
|
|
|
|
|
2006-09-13 14:30:00 -04:00
|
|
|
static const struct ethtool_ops ethtool_ops_203 = {
|
2005-04-16 18:20:36 -04:00
|
|
|
.get_drvinfo = ewrk3_get_drvinfo,
|
|
|
|
|
.get_settings = ewrk3_get_settings,
|
|
|
|
|
.set_settings = ewrk3_set_settings,
|
|
|
|
|
.phys_id = ewrk3_phys_id,
|
|
|
|
|
};
|
|
|
|
|
|
2006-09-13 14:30:00 -04:00
|
|
|
static const struct ethtool_ops ethtool_ops = {
|
2005-04-16 18:20:36 -04:00
|
|
|
.get_drvinfo = ewrk3_get_drvinfo,
|
|
|
|
|
.get_settings = ewrk3_get_settings,
|
|
|
|
|
.set_settings = ewrk3_set_settings,
|
|
|
|
|
.get_link = ewrk3_get_link,
|
|
|
|
|
.phys_id = ewrk3_phys_id,
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
** Perform IOCTL call functions here. Some are privileged operations and the
|
|
|
|
|
** effective uid is checked in those cases.
|
|
|
|
|
*/
|
|
|
|
|
static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
|
|
|
{
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
struct ewrk3_ioctl *ioc = (struct ewrk3_ioctl *) &rq->ifr_ifru;
|
|
|
|
|
u_long iobase = dev->base_addr;
|
|
|
|
|
int i, j, status = 0;
|
|
|
|
|
u_char csr;
|
|
|
|
|
unsigned long flags;
|
|
|
|
|
union ewrk3_addr {
|
|
|
|
|
u_char addr[HASH_TABLE_LEN * ETH_ALEN];
|
|
|
|
|
u_short val[(HASH_TABLE_LEN * ETH_ALEN) >> 1];
|
|
|
|
|
};
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
union ewrk3_addr *tmp;
|
|
|
|
|
|
|
|
|
|
/* All we handle are private IOCTLs */
|
|
|
|
|
if (cmd != EWRK3IOCTL)
|
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
|
|
|
|
|
|
tmp = kmalloc(sizeof(union ewrk3_addr), GFP_KERNEL);
|
|
|
|
|
if(tmp==NULL)
|
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
|
|
switch (ioc->cmd) {
|
|
|
|
|
case EWRK3_GET_HWADDR: /* Get the hardware address */
|
|
|
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
|
|
|
tmp->addr[i] = dev->dev_addr[i];
|
|
|
|
|
}
|
|
|
|
|
ioc->len = ETH_ALEN;
|
|
|
|
|
if (copy_to_user(ioc->data, tmp->addr, ioc->len))
|
|
|
|
|
status = -EFAULT;
|
|
|
|
|
break;
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
case EWRK3_SET_HWADDR: /* Set the hardware address */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
csr = inb(EWRK3_CSR);
|
|
|
|
|
csr |= (CSR_TXD | CSR_RXD);
|
|
|
|
|
outb(csr, EWRK3_CSR); /* Disable the TX and RX */
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
|
|
|
|
|
if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN)) {
|
|
|
|
|
status = -EFAULT;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
for (i = 0; i < ETH_ALEN; i++) {
|
|
|
|
|
dev->dev_addr[i] = tmp->addr[i];
|
|
|
|
|
outb(tmp->addr[i], EWRK3_PAR0 + i);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
csr = inb(EWRK3_CSR);
|
|
|
|
|
csr &= ~(CSR_TXD | CSR_RXD); /* Enable the TX and RX */
|
|
|
|
|
outb(csr, EWRK3_CSR);
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_SET_PROM: /* Set Promiscuous Mode */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
csr = inb(EWRK3_CSR);
|
|
|
|
|
csr |= CSR_PME;
|
|
|
|
|
csr &= ~CSR_MCE;
|
|
|
|
|
outb(csr, EWRK3_CSR);
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_CLR_PROM: /* Clear Promiscuous Mode */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
csr = inb(EWRK3_CSR);
|
|
|
|
|
csr &= ~CSR_PME;
|
|
|
|
|
outb(csr, EWRK3_CSR);
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_GET_MCA: /* Get the multicast address table */
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
if (lp->shmem_length == IO_ONLY) {
|
|
|
|
|
outb(0, EWRK3_IOPR);
|
|
|
|
|
outw(PAGE0_HTE, EWRK3_PIR1);
|
|
|
|
|
for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) {
|
|
|
|
|
tmp->addr[i] = inb(EWRK3_DATA);
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
outb(0, EWRK3_MPR);
|
|
|
|
|
memcpy_fromio(tmp->addr, lp->shmem + PAGE0_HTE, (HASH_TABLE_LEN >> 3));
|
|
|
|
|
}
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
|
|
|
|
|
ioc->len = (HASH_TABLE_LEN >> 3);
|
|
|
|
|
if (copy_to_user(ioc->data, tmp->addr, ioc->len))
|
|
|
|
|
status = -EFAULT;
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_SET_MCA: /* Set a multicast address */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
if (ioc->len > 1024)
|
|
|
|
|
{
|
|
|
|
|
status = -EINVAL;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN * ioc->len)) {
|
|
|
|
|
status = -EFAULT;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
set_multicast_list(dev);
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_CLR_MCA: /* Clear all multicast addresses */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
set_multicast_list(dev);
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_MCA_EN: /* Enable multicast addressing */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
csr = inb(EWRK3_CSR);
|
|
|
|
|
csr |= CSR_MCE;
|
|
|
|
|
csr &= ~CSR_PME;
|
|
|
|
|
outb(csr, EWRK3_CSR);
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_GET_STATS: { /* Get the driver statistics */
|
|
|
|
|
struct ewrk3_stats *tmp_stats =
|
|
|
|
|
kmalloc(sizeof(lp->pktStats), GFP_KERNEL);
|
|
|
|
|
if (!tmp_stats) {
|
|
|
|
|
status = -ENOMEM;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
memcpy(tmp_stats, &lp->pktStats, sizeof(lp->pktStats));
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock, flags);
|
|
|
|
|
|
|
|
|
|
ioc->len = sizeof(lp->pktStats);
|
|
|
|
|
if (copy_to_user(ioc->data, tmp_stats, sizeof(lp->pktStats)))
|
|
|
|
|
status = -EFAULT;
|
|
|
|
|
kfree(tmp_stats);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
case EWRK3_CLR_STATS: /* Zero out the driver statistics */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
spin_lock_irqsave(&lp->hw_lock, flags);
|
|
|
|
|
memset(&lp->pktStats, 0, sizeof(lp->pktStats));
|
|
|
|
|
spin_unlock_irqrestore(&lp->hw_lock,flags);
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_GET_CSR: /* Get the CSR Register contents */
|
|
|
|
|
tmp->addr[0] = inb(EWRK3_CSR);
|
|
|
|
|
ioc->len = 1;
|
|
|
|
|
if (copy_to_user(ioc->data, tmp->addr, ioc->len))
|
|
|
|
|
status = -EFAULT;
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_SET_CSR: /* Set the CSR Register contents */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
if (copy_from_user(tmp->addr, ioc->data, 1)) {
|
|
|
|
|
status = -EFAULT;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
outb(tmp->addr[0], EWRK3_CSR);
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_GET_EEPROM: /* Get the EEPROM contents */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
for (i = 0; i < (EEPROM_MAX >> 1); i++) {
|
|
|
|
|
tmp->val[i] = (short) Read_EEPROM(iobase, i);
|
|
|
|
|
}
|
|
|
|
|
i = EEPROM_MAX;
|
|
|
|
|
tmp->addr[i++] = inb(EWRK3_CMR); /* Config/Management Reg. */
|
|
|
|
|
for (j = 0; j < ETH_ALEN; j++) {
|
|
|
|
|
tmp->addr[i++] = inb(EWRK3_PAR0 + j);
|
|
|
|
|
}
|
|
|
|
|
ioc->len = EEPROM_MAX + 1 + ETH_ALEN;
|
|
|
|
|
if (copy_to_user(ioc->data, tmp->addr, ioc->len))
|
|
|
|
|
status = -EFAULT;
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_SET_EEPROM: /* Set the EEPROM contents */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
if (copy_from_user(tmp->addr, ioc->data, EEPROM_MAX)) {
|
|
|
|
|
status = -EFAULT;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
for (i = 0; i < (EEPROM_MAX >> 1); i++) {
|
|
|
|
|
Write_EEPROM(tmp->val[i], iobase, i);
|
|
|
|
|
}
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_GET_CMR: /* Get the CMR Register contents */
|
|
|
|
|
tmp->addr[0] = inb(EWRK3_CMR);
|
|
|
|
|
ioc->len = 1;
|
|
|
|
|
if (copy_to_user(ioc->data, tmp->addr, ioc->len))
|
|
|
|
|
status = -EFAULT;
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_SET_TX_CUT_THRU: /* Set TX cut through mode */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
lp->txc = 1;
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
case EWRK3_CLR_TX_CUT_THRU: /* Clear TX cut through mode */
|
|
|
|
|
if (capable(CAP_NET_ADMIN)) {
|
|
|
|
|
lp->txc = 0;
|
|
|
|
|
} else {
|
|
|
|
|
status = -EPERM;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
status = -EOPNOTSUPP;
|
|
|
|
|
}
|
|
|
|
|
kfree(tmp);
|
|
|
|
|
return status;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
#ifdef MODULE
|
|
|
|
|
static struct net_device *ewrk3_devs[MAX_NUM_EWRK3S];
|
|
|
|
|
static int ndevs;
|
|
|
|
|
static int io[MAX_NUM_EWRK3S+1] = { 0x300, 0, };
|
|
|
|
|
|
|
|
|
|
/* '21' below should really be 'MAX_NUM_EWRK3S' */
|
|
|
|
|
module_param_array(io, int, NULL, 0);
|
|
|
|
|
module_param_array(irq, int, NULL, 0);
|
|
|
|
|
MODULE_PARM_DESC(io, "EtherWORKS 3 I/O base address(es)");
|
|
|
|
|
MODULE_PARM_DESC(irq, "EtherWORKS 3 IRQ number(s)");
|
|
|
|
|
|
|
|
|
|
static __exit void ewrk3_exit_module(void)
|
|
|
|
|
{
|
|
|
|
|
int i;
|
|
|
|
|
|
|
|
|
|
for( i=0; i<ndevs; i++ ) {
|
|
|
|
|
struct net_device *dev = ewrk3_devs[i];
|
|
|
|
|
struct ewrk3_private *lp = netdev_priv(dev);
|
|
|
|
|
ewrk3_devs[i] = NULL;
|
|
|
|
|
unregister_netdev(dev);
|
|
|
|
|
release_region(dev->base_addr, EWRK3_TOTAL_SIZE);
|
|
|
|
|
iounmap(lp->shmem);
|
|
|
|
|
free_netdev(dev);
|
|
|
|
|
}
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static __init int ewrk3_init_module(void)
|
|
|
|
|
{
|
|
|
|
|
int i=0;
|
|
|
|
|
|
|
|
|
|
while( io[i] && irq[i] ) {
|
|
|
|
|
struct net_device *dev
|
|
|
|
|
= alloc_etherdev(sizeof(struct ewrk3_private));
|
|
|
|
|
|
|
|
|
|
if (!dev)
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
|
|
if (ewrk3_probe1(dev, io[i], irq[i]) != 0) {
|
|
|
|
|
free_netdev(dev);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
ewrk3_devs[ndevs++] = dev;
|
|
|
|
|
i++;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
return ndevs ? 0 : -EIO;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/* Hack for breakage in new module stuff */
|
|
|
|
|
module_exit(ewrk3_exit_module);
|
|
|
|
|
module_init(ewrk3_init_module);
|
|
|
|
|
#endif /* MODULE */
|
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
2006-09-13 13:24:59 -04:00
|
|
|
|
2005-04-16 18:20:36 -04:00
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* Local variables:
|
|
|
|
|
* compile-command: "gcc -D__KERNEL__ -I/linux/include -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2 -O2 -m486 -c ewrk3.c"
|
|
|
|
|
*
|
|
|
|
|
* compile-command: "gcc -D__KERNEL__ -DMODULE -I/linux/include -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2 -O2 -m486 -c ewrk3.c"
|
|
|
|
|
* End:
|
|
|
|
|
*/
|
