android_kernel_xiaomi_sm8350/arch/ppc/kernel/align.c

411 lines
10 KiB
C
Raw Normal View History

/*
* align.c - handle alignment exceptions for the Power PC.
*
* Copyright (c) 1996 Paul Mackerras <paulus@cs.anu.edu.au>
* Copyright (c) 1998-1999 TiVo, Inc.
* PowerPC 403GCX modifications.
* Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu>
* PowerPC 403GCX/405GP modifications.
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/cache.h>
struct aligninfo {
unsigned char len;
unsigned char flags;
};
#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
#define OPCD(inst) (((inst) & 0xFC000000) >> 26)
#define RS(inst) (((inst) & 0x03E00000) >> 21)
#define RA(inst) (((inst) & 0x001F0000) >> 16)
#define IS_XFORM(code) ((code) == 31)
#endif
#define INVALID { 0, 0 }
#define LD 1 /* load */
#define ST 2 /* store */
#define SE 4 /* sign-extend value */
#define F 8 /* to/from fp regs */
#define U 0x10 /* update index register */
#define M 0x20 /* multiple load/store */
#define S 0x40 /* single-precision fp, or byte-swap value */
#define SX 0x40 /* byte count in XER */
#define HARD 0x80 /* string, stwcx. */
#define DCBZ 0x5f /* 8xx/82xx dcbz faults when cache not enabled */
/*
* The PowerPC stores certain bits of the instruction that caused the
* alignment exception in the DSISR register. This array maps those
* bits to information about the operand length and what the
* instruction would do.
*/
static struct aligninfo aligninfo[128] = {
{ 4, LD }, /* 00 0 0000: lwz / lwarx */
INVALID, /* 00 0 0001 */
{ 4, ST }, /* 00 0 0010: stw */
INVALID, /* 00 0 0011 */
{ 2, LD }, /* 00 0 0100: lhz */
{ 2, LD+SE }, /* 00 0 0101: lha */
{ 2, ST }, /* 00 0 0110: sth */
{ 4, LD+M }, /* 00 0 0111: lmw */
{ 4, LD+F+S }, /* 00 0 1000: lfs */
{ 8, LD+F }, /* 00 0 1001: lfd */
{ 4, ST+F+S }, /* 00 0 1010: stfs */
{ 8, ST+F }, /* 00 0 1011: stfd */
INVALID, /* 00 0 1100 */
INVALID, /* 00 0 1101: ld/ldu/lwa */
INVALID, /* 00 0 1110 */
INVALID, /* 00 0 1111: std/stdu */
{ 4, LD+U }, /* 00 1 0000: lwzu */
INVALID, /* 00 1 0001 */
{ 4, ST+U }, /* 00 1 0010: stwu */
INVALID, /* 00 1 0011 */
{ 2, LD+U }, /* 00 1 0100: lhzu */
{ 2, LD+SE+U }, /* 00 1 0101: lhau */
{ 2, ST+U }, /* 00 1 0110: sthu */
{ 4, ST+M }, /* 00 1 0111: stmw */
{ 4, LD+F+S+U }, /* 00 1 1000: lfsu */
{ 8, LD+F+U }, /* 00 1 1001: lfdu */
{ 4, ST+F+S+U }, /* 00 1 1010: stfsu */
{ 8, ST+F+U }, /* 00 1 1011: stfdu */
INVALID, /* 00 1 1100 */
INVALID, /* 00 1 1101 */
INVALID, /* 00 1 1110 */
INVALID, /* 00 1 1111 */
INVALID, /* 01 0 0000: ldx */
INVALID, /* 01 0 0001 */
INVALID, /* 01 0 0010: stdx */
INVALID, /* 01 0 0011 */
INVALID, /* 01 0 0100 */
INVALID, /* 01 0 0101: lwax */
INVALID, /* 01 0 0110 */
INVALID, /* 01 0 0111 */
{ 4, LD+M+HARD+SX }, /* 01 0 1000: lswx */
{ 4, LD+M+HARD }, /* 01 0 1001: lswi */
{ 4, ST+M+HARD+SX }, /* 01 0 1010: stswx */
{ 4, ST+M+HARD }, /* 01 0 1011: stswi */
INVALID, /* 01 0 1100 */
INVALID, /* 01 0 1101 */
INVALID, /* 01 0 1110 */
INVALID, /* 01 0 1111 */
INVALID, /* 01 1 0000: ldux */
INVALID, /* 01 1 0001 */
INVALID, /* 01 1 0010: stdux */
INVALID, /* 01 1 0011 */
INVALID, /* 01 1 0100 */
INVALID, /* 01 1 0101: lwaux */
INVALID, /* 01 1 0110 */
INVALID, /* 01 1 0111 */
INVALID, /* 01 1 1000 */
INVALID, /* 01 1 1001 */
INVALID, /* 01 1 1010 */
INVALID, /* 01 1 1011 */
INVALID, /* 01 1 1100 */
INVALID, /* 01 1 1101 */
INVALID, /* 01 1 1110 */
INVALID, /* 01 1 1111 */
INVALID, /* 10 0 0000 */
INVALID, /* 10 0 0001 */
{ 0, ST+HARD }, /* 10 0 0010: stwcx. */
INVALID, /* 10 0 0011 */
INVALID, /* 10 0 0100 */
INVALID, /* 10 0 0101 */
INVALID, /* 10 0 0110 */
INVALID, /* 10 0 0111 */
{ 4, LD+S }, /* 10 0 1000: lwbrx */
INVALID, /* 10 0 1001 */
{ 4, ST+S }, /* 10 0 1010: stwbrx */
INVALID, /* 10 0 1011 */
{ 2, LD+S }, /* 10 0 1100: lhbrx */
INVALID, /* 10 0 1101 */
{ 2, ST+S }, /* 10 0 1110: sthbrx */
INVALID, /* 10 0 1111 */
INVALID, /* 10 1 0000 */
INVALID, /* 10 1 0001 */
INVALID, /* 10 1 0010 */
INVALID, /* 10 1 0011 */
INVALID, /* 10 1 0100 */
INVALID, /* 10 1 0101 */
INVALID, /* 10 1 0110 */
INVALID, /* 10 1 0111 */
INVALID, /* 10 1 1000 */
INVALID, /* 10 1 1001 */
INVALID, /* 10 1 1010 */
INVALID, /* 10 1 1011 */
INVALID, /* 10 1 1100 */
INVALID, /* 10 1 1101 */
INVALID, /* 10 1 1110 */
{ 0, ST+HARD }, /* 10 1 1111: dcbz */
{ 4, LD }, /* 11 0 0000: lwzx */
INVALID, /* 11 0 0001 */
{ 4, ST }, /* 11 0 0010: stwx */
INVALID, /* 11 0 0011 */
{ 2, LD }, /* 11 0 0100: lhzx */
{ 2, LD+SE }, /* 11 0 0101: lhax */
{ 2, ST }, /* 11 0 0110: sthx */
INVALID, /* 11 0 0111 */
{ 4, LD+F+S }, /* 11 0 1000: lfsx */
{ 8, LD+F }, /* 11 0 1001: lfdx */
{ 4, ST+F+S }, /* 11 0 1010: stfsx */
{ 8, ST+F }, /* 11 0 1011: stfdx */
INVALID, /* 11 0 1100 */
INVALID, /* 11 0 1101: lmd */
INVALID, /* 11 0 1110 */
INVALID, /* 11 0 1111: stmd */
{ 4, LD+U }, /* 11 1 0000: lwzux */
INVALID, /* 11 1 0001 */
{ 4, ST+U }, /* 11 1 0010: stwux */
INVALID, /* 11 1 0011 */
{ 2, LD+U }, /* 11 1 0100: lhzux */
{ 2, LD+SE+U }, /* 11 1 0101: lhaux */
{ 2, ST+U }, /* 11 1 0110: sthux */
INVALID, /* 11 1 0111 */
{ 4, LD+F+S+U }, /* 11 1 1000: lfsux */
{ 8, LD+F+U }, /* 11 1 1001: lfdux */
{ 4, ST+F+S+U }, /* 11 1 1010: stfsux */
{ 8, ST+F+U }, /* 11 1 1011: stfdux */
INVALID, /* 11 1 1100 */
INVALID, /* 11 1 1101 */
INVALID, /* 11 1 1110 */
INVALID, /* 11 1 1111 */
};
#define SWAP(a, b) (t = (a), (a) = (b), (b) = t)
int
fix_alignment(struct pt_regs *regs)
{
int instr, nb, flags;
#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
int opcode, f1, f2, f3;
#endif
int i, t;
int reg, areg;
int offset, nb0;
unsigned char __user *addr;
unsigned char *rptr;
union {
long l;
float f;
double d;
unsigned char v[8];
} data;
CHECK_FULL_REGS(regs);
#if defined(CONFIG_4xx) || defined(CONFIG_POWER4) || defined(CONFIG_BOOKE)
/* The 4xx-family & Book-E processors have no DSISR register,
* so we emulate it.
* The POWER4 has a DSISR register but doesn't set it on
* an alignment fault. -- paulus
*/
if (__get_user(instr, (unsigned int __user *) regs->nip))
return 0;
opcode = OPCD(instr);
reg = RS(instr);
areg = RA(instr);
if (!IS_XFORM(opcode)) {
f1 = 0;
f2 = (instr & 0x04000000) >> 26;
f3 = (instr & 0x78000000) >> 27;
} else {
f1 = (instr & 0x00000006) >> 1;
f2 = (instr & 0x00000040) >> 6;
f3 = (instr & 0x00000780) >> 7;
}
instr = ((f1 << 5) | (f2 << 4) | f3);
#else
reg = (regs->dsisr >> 5) & 0x1f; /* source/dest register */
areg = regs->dsisr & 0x1f; /* register to update */
instr = (regs->dsisr >> 10) & 0x7f;
#endif
nb = aligninfo[instr].len;
if (nb == 0) {
long __user *p;
int i;
if (instr != DCBZ)
return 0; /* too hard or invalid instruction */
/*
* The dcbz (data cache block zero) instruction
* gives an alignment fault if used on non-cacheable
* memory. We handle the fault mainly for the
* case when we are running with the cache disabled
* for debugging.
*/
p = (long __user *) (regs->dar & -L1_CACHE_BYTES);
if (user_mode(regs)
&& !access_ok(VERIFY_WRITE, p, L1_CACHE_BYTES))
return -EFAULT;
for (i = 0; i < L1_CACHE_BYTES / sizeof(long); ++i)
if (__put_user(0, p+i))
return -EFAULT;
return 1;
}
flags = aligninfo[instr].flags;
if ((flags & (LD|ST)) == 0)
return 0;
/* For the 4xx-family & Book-E processors, the 'dar' field of the
* pt_regs structure is overloaded and is really from the DEAR.
*/
addr = (unsigned char __user *)regs->dar;
if (flags & M) {
/* lmw, stmw, lswi/x, stswi/x */
nb0 = 0;
if (flags & HARD) {
if (flags & SX) {
nb = regs->xer & 127;
if (nb == 0)
return 1;
} else {
if (__get_user(instr,
(unsigned int __user *)regs->nip))
return 0;
nb = (instr >> 11) & 0x1f;
if (nb == 0)
nb = 32;
}
if (nb + reg * 4 > 128) {
nb0 = nb + reg * 4 - 128;
nb = 128 - reg * 4;
}
} else {
/* lwm, stmw */
nb = (32 - reg) * 4;
}
if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb+nb0))
return -EFAULT; /* bad address */
rptr = (unsigned char *) &regs->gpr[reg];
if (flags & LD) {
for (i = 0; i < nb; ++i)
if (__get_user(rptr[i], addr+i))
return -EFAULT;
if (nb0 > 0) {
rptr = (unsigned char *) &regs->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i)
if (__get_user(rptr[i], addr+i))
return -EFAULT;
}
for (; (i & 3) != 0; ++i)
rptr[i] = 0;
} else {
for (i = 0; i < nb; ++i)
if (__put_user(rptr[i], addr+i))
return -EFAULT;
if (nb0 > 0) {
rptr = (unsigned char *) &regs->gpr[0];
addr += nb;
for (i = 0; i < nb0; ++i)
if (__put_user(rptr[i], addr+i))
return -EFAULT;
}
}
return 1;
}
offset = 0;
if (nb < 4) {
/* read/write the least significant bits */
data.l = 0;
offset = 4 - nb;
}
/* Verify the address of the operand */
if (user_mode(regs)) {
if (!access_ok((flags & ST? VERIFY_WRITE: VERIFY_READ), addr, nb))
return -EFAULT; /* bad address */
}
if (flags & F) {
preempt_disable();
if (regs->msr & MSR_FP)
giveup_fpu(current);
preempt_enable();
}
/* If we read the operand, copy it in, else get register values */
if (flags & LD) {
for (i = 0; i < nb; ++i)
if (__get_user(data.v[offset+i], addr+i))
return -EFAULT;
} else if (flags & F) {
data.d = current->thread.fpr[reg];
} else {
data.l = regs->gpr[reg];
}
switch (flags & ~U) {
case LD+SE: /* sign extend */
if (data.v[2] >= 0x80)
data.v[0] = data.v[1] = -1;
break;
case LD+S: /* byte-swap */
case ST+S:
if (nb == 2) {
SWAP(data.v[2], data.v[3]);
} else {
SWAP(data.v[0], data.v[3]);
SWAP(data.v[1], data.v[2]);
}
break;
/* Single-precision FP load and store require conversions... */
case LD+F+S:
#ifdef CONFIG_PPC_FPU
preempt_disable();
enable_kernel_fp();
[PATCH] powerpc: Fix handling of fpscr on 64-bit The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 02:27:25 -04:00
cvt_fd(&data.f, &data.d, &current->thread);
preempt_enable();
#else
return 0;
#endif
break;
case ST+F+S:
#ifdef CONFIG_PPC_FPU
preempt_disable();
enable_kernel_fp();
[PATCH] powerpc: Fix handling of fpscr on 64-bit The recent merge of fpu.S broken the handling of fpscr for ARCH=powerpc and CONFIG_PPC64=y. FP registers could be corrupted, leading to strange random application crashes. The confusion arises, because the thread_struct has (and requires) a 64-bit area to save the fpscr, because we use load/store double instructions to get it in to/out of the FPU. However, only the low 32-bits are actually used, so we want to treat it as a 32-bit quantity when manipulating its bits to avoid extra load/stores on 32-bit. This patch replaces the current definition with a structure of two 32-bit quantities (pad and val), to clarify things as much as is possible. The 'val' field is used when manipulating bits, the structure itself is used when obtaining the address for loading/unloading the value from the FPU. While we're at it, consolidate the 4 (!) almost identical versions of cvt_fd() and cvt_df() (arch/ppc/kernel/misc.S, arch/ppc64/kernel/misc.S, arch/powerpc/kernel/misc_32.S, arch/powerpc/kernel/misc_64.S) into a single version in fpu.S. The new version takes a pointer to thread_struct and applies the correct offset itself, rather than a pointer to the fpscr field itself, again to avoid confusion as to which is the correct field to use. Finally, this patch makes ARCH=ppc64 also use the consolidated fpu.S code, which it previously did not. Built for G5 (ARCH=ppc64 and ARCH=powerpc), 32-bit powermac (ARCH=ppc and ARCH=powerpc) and Walnut (ARCH=ppc, CONFIG_MATH_EMULATION=y). Booted on G5 (ARCH=powerpc) and things which previously fell over no longer do. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-27 02:27:25 -04:00
cvt_df(&data.d, &data.f, &current->thread);
preempt_enable();
#else
return 0;
#endif
break;
}
if (flags & ST) {
for (i = 0; i < nb; ++i)
if (__put_user(data.v[offset+i], addr+i))
return -EFAULT;
} else if (flags & F) {
current->thread.fpr[reg] = data.d;
} else {
regs->gpr[reg] = data.l;
}
if (flags & U)
regs->gpr[areg] = regs->dar;
return 1;
}