2007-11-06 15:35:08 -05:00
|
|
|
# x86 configuration
|
2007-11-12 14:54:30 -05:00
|
|
|
mainmenu "Linux Kernel Configuration for x86"
|
|
|
|
|
|
|
|
|
|
# Select 32 or 64 bit
|
|
|
|
|
config 64BIT
|
2007-11-17 09:37:31 -05:00
|
|
|
bool "64-bit kernel" if ARCH = "x86"
|
|
|
|
|
default ARCH = "x86_64"
|
2007-11-12 14:54:30 -05:00
|
|
|
help
|
|
|
|
|
Say yes to build a 64-bit kernel - formerly known as x86_64
|
|
|
|
|
Say no to build a 32-bit kernel - formerly known as i386
|
|
|
|
|
|
|
|
|
|
config X86_32
|
|
|
|
|
def_bool !64BIT
|
|
|
|
|
|
|
|
|
|
config X86_64
|
|
|
|
|
def_bool 64BIT
|
2007-11-06 15:35:08 -05:00
|
|
|
|
|
|
|
|
### Arch settings
|
2007-11-06 17:30:30 -05:00
|
|
|
config X86
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2008-06-17 07:19:34 -04:00
|
|
|
select HAVE_AOUT if X86_32
|
2008-05-05 17:19:50 -04:00
|
|
|
select HAVE_UNSTABLE_SCHED_CLOCK
|
2008-02-09 04:46:40 -05:00
|
|
|
select HAVE_IDE
|
2008-02-02 15:10:34 -05:00
|
|
|
select HAVE_OPROFILE
|
2008-07-24 00:27:05 -04:00
|
|
|
select HAVE_IOREMAP_PROT
|
2008-02-02 15:10:35 -05:00
|
|
|
select HAVE_KPROBES
|
2008-07-26 07:52:50 -04:00
|
|
|
select ARCH_WANT_OPTIONAL_GPIOLIB
|
2008-03-04 17:28:37 -05:00
|
|
|
select HAVE_KRETPROBES
|
2008-08-14 15:45:11 -04:00
|
|
|
select HAVE_FTRACE_MCOUNT_RECORD
|
2008-05-17 00:01:36 -04:00
|
|
|
select HAVE_DYNAMIC_FTRACE
|
2008-10-06 19:06:12 -04:00
|
|
|
select HAVE_FUNCTION_TRACER
|
2008-02-20 12:20:08 -05:00
|
|
|
select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64)
|
2008-04-21 07:39:53 -04:00
|
|
|
select HAVE_ARCH_KGDB if !X86_VOYAGER
|
2008-04-20 17:35:12 -04:00
|
|
|
select HAVE_ARCH_TRACEHOOK
|
2008-06-29 06:19:31 -04:00
|
|
|
select HAVE_GENERIC_DMA_COHERENT if X86_32
|
2008-07-25 04:45:33 -04:00
|
|
|
select HAVE_EFFICIENT_UNALIGNED_ACCESS
|
2008-02-10 02:16:28 -05:00
|
|
|
|
2008-05-25 17:03:18 -04:00
|
|
|
config ARCH_DEFCONFIG
|
2008-04-29 06:48:15 -04:00
|
|
|
string
|
2008-05-25 17:03:18 -04:00
|
|
|
default "arch/x86/configs/i386_defconfig" if X86_32
|
|
|
|
|
default "arch/x86/configs/x86_64_defconfig" if X86_64
|
2008-04-29 06:48:15 -04:00
|
|
|
|
2007-11-06 17:30:30 -05:00
|
|
|
config GENERIC_TIME
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
|
|
|
|
config GENERIC_CMOS_UPDATE
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
|
|
|
|
config CLOCKSOURCE_WATCHDOG
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
|
|
|
|
config GENERIC_CLOCKEVENTS
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
|
|
|
|
config GENERIC_CLOCKEVENTS_BROADCAST
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
depends on X86_64 || (X86_32 && X86_LOCAL_APIC)
|
|
|
|
|
|
|
|
|
|
config LOCKDEP_SUPPORT
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
|
|
|
|
config STACKTRACE_SUPPORT
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
2008-02-01 11:45:14 -05:00
|
|
|
config HAVE_LATENCYTOP_SUPPORT
|
|
|
|
|
def_bool y
|
|
|
|
|
|
2008-01-08 02:20:30 -05:00
|
|
|
config FAST_CMPXCHG_LOCAL
|
|
|
|
|
bool
|
|
|
|
|
default y
|
|
|
|
|
|
2007-11-06 17:30:30 -05:00
|
|
|
config MMU
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
|
|
|
|
config ZONE_DMA
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
|
|
|
|
config SBUS
|
|
|
|
|
bool
|
|
|
|
|
|
|
|
|
|
config GENERIC_ISA_DMA
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
|
|
|
|
config GENERIC_IOMAP
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
|
|
|
|
config GENERIC_BUG
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
depends on BUG
|
|
|
|
|
|
|
|
|
|
config GENERIC_HWEIGHT
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
2008-01-30 07:33:35 -05:00
|
|
|
config GENERIC_GPIO
|
2008-10-16 01:01:38 -04:00
|
|
|
bool
|
2008-01-30 07:33:35 -05:00
|
|
|
|
2007-11-06 17:30:30 -05:00
|
|
|
config ARCH_MAY_HAVE_PC_FDC
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 17:30:30 -05:00
|
|
|
|
2007-11-06 15:35:08 -05:00
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
|
|
|
def_bool !X86_XADD
|
|
|
|
|
|
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
|
|
|
def_bool X86_XADD
|
|
|
|
|
|
2008-02-08 20:05:44 -05:00
|
|
|
config ARCH_HAS_CPU_IDLE_WAIT
|
|
|
|
|
def_bool y
|
|
|
|
|
|
2007-11-06 15:35:08 -05:00
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
|
|
|
def_bool y
|
|
|
|
|
|
2007-11-06 17:30:30 -05:00
|
|
|
config GENERIC_TIME_VSYSCALL
|
|
|
|
|
bool
|
|
|
|
|
default X86_64
|
|
|
|
|
|
2008-01-31 20:35:06 -05:00
|
|
|
config ARCH_HAS_CPU_RELAX
|
|
|
|
|
def_bool y
|
|
|
|
|
|
2008-10-16 19:00:08 -04:00
|
|
|
config ARCH_HAS_DEFAULT_IDLE
|
|
|
|
|
def_bool y
|
|
|
|
|
|
2008-04-28 05:12:22 -04:00
|
|
|
config ARCH_HAS_CACHE_LINE_SIZE
|
|
|
|
|
def_bool y
|
|
|
|
|
|
2008-01-30 07:33:32 -05:00
|
|
|
config HAVE_SETUP_PER_CPU_AREA
|
x86: cleanup early per cpu variables/accesses v4
* Introduce a new PER_CPU macro called "EARLY_PER_CPU". This is
used by some per_cpu variables that are initialized and accessed
before there are per_cpu areas allocated.
["Early" in respect to per_cpu variables is "earlier than the per_cpu
areas have been setup".]
This patchset adds these new macros:
DEFINE_EARLY_PER_CPU(_type, _name, _initvalue)
EXPORT_EARLY_PER_CPU_SYMBOL(_name)
DECLARE_EARLY_PER_CPU(_type, _name)
early_per_cpu_ptr(_name)
early_per_cpu_map(_name, _idx)
early_per_cpu(_name, _cpu)
The DEFINE macro defines the per_cpu variable as well as the early
map and pointer. It also initializes the per_cpu variable and map
elements to "_initvalue". The early_* macros provide access to
the initial map (usually setup during system init) and the early
pointer. This pointer is initialized to point to the early map
but is then NULL'ed when the actual per_cpu areas are setup. After
that the per_cpu variable is the correct access to the variable.
The early_per_cpu() macro is not very efficient but does show how to
access the variable if you have a function that can be called both
"early" and "late". It tests the early ptr to be NULL, and if not
then it's still valid. Otherwise, the per_cpu variable is used
instead:
#define early_per_cpu(_name, _cpu) \
(early_per_cpu_ptr(_name) ? \
early_per_cpu_ptr(_name)[_cpu] : \
per_cpu(_name, _cpu))
A better method is to actually check the pointer manually. In the
case below, numa_set_node can be called both "early" and "late":
void __cpuinit numa_set_node(int cpu, int node)
{
int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map);
if (cpu_to_node_map)
cpu_to_node_map[cpu] = node;
else
per_cpu(x86_cpu_to_node_map, cpu) = node;
}
* Add a flag "arch_provides_topology_pointers" that indicates pointers
to topology cpumask_t maps are available. Otherwise, use the function
returning the cpumask_t value. This is useful if cpumask_t set size
is very large to avoid copying data on to/off of the stack.
* The coverage of CONFIG_DEBUG_PER_CPU_MAPS has been increased while
the non-debug case has been optimized a bit.
* Remove an unreferenced compiler warning in drivers/base/topology.c
* Clean up #ifdef in setup.c
For inclusion into sched-devel/latest tree.
Based on:
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
+ sched-devel/latest .../mingo/linux-2.6-sched-devel.git
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-12 15:21:12 -04:00
|
|
|
def_bool X86_64_SMP || (X86_SMP && !X86_VOYAGER)
|
2008-01-30 07:32:51 -05:00
|
|
|
|
2008-04-04 21:11:01 -04:00
|
|
|
config HAVE_CPUMASK_OF_CPU_MAP
|
|
|
|
|
def_bool X86_64_SMP
|
|
|
|
|
|
2007-12-07 20:12:39 -05:00
|
|
|
config ARCH_HIBERNATION_POSSIBLE
|
|
|
|
|
def_bool y
|
|
|
|
|
depends on !SMP || !X86_VOYAGER
|
|
|
|
|
|
2007-12-07 20:14:00 -05:00
|
|
|
config ARCH_SUSPEND_POSSIBLE
|
|
|
|
|
def_bool y
|
|
|
|
|
depends on !X86_VOYAGER
|
|
|
|
|
|
2007-11-06 17:30:30 -05:00
|
|
|
config ZONE_DMA32
|
|
|
|
|
bool
|
|
|
|
|
default X86_64
|
|
|
|
|
|
|
|
|
|
config ARCH_POPULATES_NODE_MAP
|
|
|
|
|
def_bool y
|
|
|
|
|
|
|
|
|
|
config AUDIT_ARCH
|
|
|
|
|
bool
|
|
|
|
|
default X86_64
|
|
|
|
|
|
2008-04-09 05:03:37 -04:00
|
|
|
config ARCH_SUPPORTS_OPTIMIZED_INLINING
|
|
|
|
|
def_bool y
|
|
|
|
|
|
2007-11-06 17:30:30 -05:00
|
|
|
# Use the generic interrupt handling code in kernel/irq/:
|
|
|
|
|
config GENERIC_HARDIRQS
|
|
|
|
|
bool
|
|
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
config GENERIC_IRQ_PROBE
|
|
|
|
|
bool
|
|
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
config GENERIC_PENDING_IRQ
|
|
|
|
|
bool
|
|
|
|
|
depends on GENERIC_HARDIRQS && SMP
|
|
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
config X86_SMP
|
|
|
|
|
bool
|
2008-01-30 07:32:27 -05:00
|
|
|
depends on SMP && ((X86_32 && !X86_VOYAGER) || X86_64)
|
2007-11-06 17:30:30 -05:00
|
|
|
default y
|
|
|
|
|
|
2008-11-09 12:53:14 -05:00
|
|
|
config USE_GENERIC_SMP_HELPERS
|
|
|
|
|
def_bool y
|
|
|
|
|
depends on SMP
|
|
|
|
|
|
2008-01-30 07:32:27 -05:00
|
|
|
config X86_32_SMP
|
|
|
|
|
def_bool y
|
|
|
|
|
depends on X86_32 && SMP
|
|
|
|
|
|
|
|
|
|
config X86_64_SMP
|
|
|
|
|
def_bool y
|
|
|
|
|
depends on X86_64 && SMP
|
|
|
|
|
|
2007-11-06 17:30:30 -05:00
|
|
|
config X86_HT
|
|
|
|
|
bool
|
2007-12-04 11:19:07 -05:00
|
|
|
depends on SMP
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on (X86_32 && !X86_VOYAGER) || X86_64
|
2007-11-06 17:30:30 -05:00
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
config X86_BIOS_REBOOT
|
|
|
|
|
bool
|
2008-07-10 07:31:04 -04:00
|
|
|
depends on !X86_VOYAGER
|
2007-11-06 17:30:30 -05:00
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
config X86_TRAMPOLINE
|
|
|
|
|
bool
|
2008-04-10 17:28:10 -04:00
|
|
|
depends on X86_SMP || (X86_VOYAGER && SMP) || (64BIT && ACPI_SLEEP)
|
2007-11-06 17:30:30 -05:00
|
|
|
default y
|
|
|
|
|
|
|
|
|
|
config KTIME_SCALAR
|
|
|
|
|
def_bool X86_32
|
2007-11-09 15:56:54 -05:00
|
|
|
source "init/Kconfig"
|
2008-10-18 23:27:21 -04:00
|
|
|
source "kernel/Kconfig.freezer"
|
2007-11-06 17:30:30 -05:00
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
menu "Processor type and features"
|
|
|
|
|
|
|
|
|
|
source "kernel/time/Kconfig"
|
|
|
|
|
|
|
|
|
|
config SMP
|
|
|
|
|
bool "Symmetric multi-processing support"
|
|
|
|
|
---help---
|
|
|
|
|
This enables support for systems with more than one CPU. If you have
|
|
|
|
|
a system with only one CPU, like most personal computers, say N. If
|
|
|
|
|
you have a system with more than one CPU, say Y.
|
|
|
|
|
|
|
|
|
|
If you say N here, the kernel will run on single and multiprocessor
|
|
|
|
|
machines, but will use only one CPU of a multiprocessor machine. If
|
|
|
|
|
you say Y here, the kernel will run on many, but not all,
|
|
|
|
|
singleprocessor machines. On a singleprocessor machine, the kernel
|
|
|
|
|
will run faster if you say N here.
|
|
|
|
|
|
|
|
|
|
Note that if you say Y here and choose architecture "586" or
|
|
|
|
|
"Pentium" under "Processor family", the kernel will not work on 486
|
|
|
|
|
architectures. Similarly, multiprocessor kernels for the "PPro"
|
|
|
|
|
architecture may not work on all Pentium based boards.
|
|
|
|
|
|
|
|
|
|
People using multiprocessor machines who say Y here should also say
|
|
|
|
|
Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
|
|
|
|
|
Management" code will be disabled if you say Y here.
|
|
|
|
|
|
2008-02-03 08:50:21 -05:00
|
|
|
See also <file:Documentation/i386/IO-APIC.txt>,
|
2007-11-09 15:56:54 -05:00
|
|
|
<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
|
|
|
|
|
<http://www.tldp.org/docs.html#howto>.
|
|
|
|
|
|
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
|
|
2008-10-30 17:00:59 -04:00
|
|
|
config X86_HAS_BOOT_CPU_ID
|
|
|
|
|
def_bool y
|
|
|
|
|
depends on X86_VOYAGER
|
|
|
|
|
|
2008-06-19 15:13:09 -04:00
|
|
|
config X86_FIND_SMP_CONFIG
|
|
|
|
|
def_bool y
|
2008-07-10 09:55:27 -04:00
|
|
|
depends on X86_MPPARSE || X86_VOYAGER
|
2008-06-19 15:13:09 -04:00
|
|
|
|
|
|
|
|
config X86_MPPARSE
|
2008-10-30 06:38:24 -04:00
|
|
|
bool "Enable MPS table" if ACPI
|
|
|
|
|
default y
|
2008-07-10 08:42:03 -04:00
|
|
|
depends on X86_LOCAL_APIC
|
2008-06-19 15:13:09 -04:00
|
|
|
help
|
|
|
|
|
For old smp systems that do not have proper acpi support. Newer systems
|
|
|
|
|
(esp with 64bit cpus) with acpi support, MADT and DSDT will override it
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
choice
|
|
|
|
|
prompt "Subarchitecture Type"
|
|
|
|
|
default X86_PC
|
|
|
|
|
|
|
|
|
|
config X86_PC
|
|
|
|
|
bool "PC-compatible"
|
|
|
|
|
help
|
|
|
|
|
Choose this option if your computer is a standard PC or compatible.
|
|
|
|
|
|
|
|
|
|
config X86_ELAN
|
|
|
|
|
bool "AMD Elan"
|
|
|
|
|
depends on X86_32
|
|
|
|
|
help
|
|
|
|
|
Select this for an AMD Elan processor.
|
|
|
|
|
|
|
|
|
|
Do not use this option for K6/Athlon/Opteron processors!
|
|
|
|
|
|
|
|
|
|
If unsure, choose "PC-compatible" instead.
|
|
|
|
|
|
|
|
|
|
config X86_VOYAGER
|
|
|
|
|
bool "Voyager (NCR)"
|
2008-05-19 08:10:14 -04:00
|
|
|
depends on X86_32 && (SMP || BROKEN) && !PCI
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
|
|
|
|
Voyager is an MCA-based 32-way capable SMP architecture proprietary
|
|
|
|
|
to NCR Corp. Machine classes 345x/35xx/4100/51xx are Voyager-based.
|
|
|
|
|
|
|
|
|
|
*** WARNING ***
|
|
|
|
|
|
|
|
|
|
If you do not specifically know you have a Voyager based machine,
|
|
|
|
|
say N here, otherwise the kernel you build will not be bootable.
|
|
|
|
|
|
|
|
|
|
config X86_GENERICARCH
|
2008-06-08 21:31:54 -04:00
|
|
|
bool "Generic architecture"
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_32
|
|
|
|
|
help
|
2008-06-08 21:31:54 -04:00
|
|
|
This option compiles in the NUMAQ, Summit, bigsmp, ES7000, default
|
|
|
|
|
subarchitectures. It is intended for a generic binary kernel.
|
|
|
|
|
if you select them all, kernel will probe it one by one. and will
|
|
|
|
|
fallback to default.
|
|
|
|
|
|
|
|
|
|
if X86_GENERICARCH
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
config X86_NUMAQ
|
|
|
|
|
bool "NUMAQ (IBM/Sequent)"
|
2008-07-08 05:14:58 -04:00
|
|
|
depends on SMP && X86_32 && PCI && X86_MPPARSE
|
2007-11-09 15:56:54 -05:00
|
|
|
select NUMA
|
|
|
|
|
help
|
2008-06-08 21:31:54 -04:00
|
|
|
This option is used for getting Linux to run on a NUMAQ (IBM/Sequent)
|
|
|
|
|
NUMA multiquad box. This changes the way that processors are
|
|
|
|
|
bootstrapped, and uses Clustered Logical APIC addressing mode instead
|
|
|
|
|
of Flat Logical. You will need a new lynxer.elf file to flash your
|
|
|
|
|
firmware with - send email to <Martin.Bligh@us.ibm.com>.
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config X86_SUMMIT
|
|
|
|
|
bool "Summit/EXA (IBM x440)"
|
|
|
|
|
depends on X86_32 && SMP
|
|
|
|
|
help
|
|
|
|
|
This option is needed for IBM systems that use the Summit/EXA chipset.
|
|
|
|
|
In particular, it is needed for the x440.
|
|
|
|
|
|
|
|
|
|
config X86_ES7000
|
|
|
|
|
bool "Support for Unisys ES7000 IA32 series"
|
|
|
|
|
depends on X86_32 && SMP
|
|
|
|
|
help
|
|
|
|
|
Support for Unisys ES7000 systems. Say 'Y' here if this kernel is
|
|
|
|
|
supposed to run on an IA32-based Unisys ES7000 system.
|
|
|
|
|
|
|
|
|
|
config X86_BIGSMP
|
2008-06-08 21:31:54 -04:00
|
|
|
bool "Support for big SMP systems with more than 8 CPUs"
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_32 && SMP
|
|
|
|
|
help
|
|
|
|
|
This option is needed for the systems that have more than 8 CPUs
|
|
|
|
|
and if the system is not of any sub-arch type above.
|
|
|
|
|
|
2008-06-08 21:31:54 -04:00
|
|
|
endif
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config X86_VSMP
|
|
|
|
|
bool "Support for ScaleMP vSMP"
|
2008-02-11 14:16:04 -05:00
|
|
|
select PARAVIRT
|
2008-07-10 06:21:58 -04:00
|
|
|
depends on X86_64 && PCI
|
2008-02-11 14:16:04 -05:00
|
|
|
help
|
2007-11-09 15:56:54 -05:00
|
|
|
Support for ScaleMP vSMP systems. Say 'Y' here if this kernel is
|
|
|
|
|
supposed to run on these EM64T-based machines. Only choose this option
|
|
|
|
|
if you have one of these machines.
|
|
|
|
|
|
|
|
|
|
endchoice
|
|
|
|
|
|
2008-07-10 09:55:27 -04:00
|
|
|
config X86_VISWS
|
|
|
|
|
bool "SGI 320/540 (Visual Workstation)"
|
2008-07-10 14:06:30 -04:00
|
|
|
depends on X86_32 && PCI && !X86_VOYAGER && X86_MPPARSE && PCI_GODIRECT
|
2008-07-10 09:55:27 -04:00
|
|
|
help
|
|
|
|
|
The SGI Visual Workstation series is an IA32-based workstation
|
|
|
|
|
based on SGI systems chips with some legacy PC hardware attached.
|
|
|
|
|
|
|
|
|
|
Say Y here to create a kernel to run on the SGI 320 or 540.
|
|
|
|
|
|
|
|
|
|
A kernel compiled for the Visual Workstation will run on general
|
|
|
|
|
PCs as well. See <file:Documentation/sgi-visws.txt> for details.
|
|
|
|
|
|
2008-07-26 07:52:50 -04:00
|
|
|
config X86_RDC321X
|
|
|
|
|
bool "RDC R-321x SoC"
|
|
|
|
|
depends on X86_32
|
|
|
|
|
select M486
|
|
|
|
|
select X86_REBOOTFIXUPS
|
|
|
|
|
help
|
|
|
|
|
This option is needed for RDC R-321x system-on-chip, also known
|
|
|
|
|
as R-8610-(G).
|
|
|
|
|
If you don't have one of these chips, you should say N here.
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
config SCHED_NO_NO_OMIT_FRAME_POINTER
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "Single-depth WCHAN output"
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_32
|
|
|
|
|
help
|
|
|
|
|
Calculate simpler /proc/<PID>/wchan values. If this option
|
|
|
|
|
is disabled then wchan values will recurse back to the
|
|
|
|
|
caller function. This provides more accurate wchan values,
|
|
|
|
|
at the expense of slightly more scheduling overhead.
|
|
|
|
|
|
|
|
|
|
If in doubt, say "Y".
|
|
|
|
|
|
|
|
|
|
menuconfig PARAVIRT_GUEST
|
|
|
|
|
bool "Paravirtualized guest support"
|
|
|
|
|
help
|
|
|
|
|
Say Y here to get to see options related to running Linux under
|
|
|
|
|
various hypervisors. This option alone does not add any kernel code.
|
|
|
|
|
|
|
|
|
|
If you say N, all options in this submenu will be skipped and disabled.
|
|
|
|
|
|
|
|
|
|
if PARAVIRT_GUEST
|
|
|
|
|
|
|
|
|
|
source "arch/x86/xen/Kconfig"
|
|
|
|
|
|
|
|
|
|
config VMI
|
|
|
|
|
bool "VMI Guest support"
|
|
|
|
|
select PARAVIRT
|
2008-01-30 07:33:32 -05:00
|
|
|
depends on X86_32
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on !X86_VOYAGER
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
|
|
|
|
VMI provides a paravirtualized interface to the VMware ESX server
|
|
|
|
|
(it could be used by other hypervisors in theory too, but is not
|
|
|
|
|
at the moment), by linking the kernel to a GPL-ed ROM module
|
|
|
|
|
provided by the hypervisor.
|
|
|
|
|
|
2008-02-15 14:52:48 -05:00
|
|
|
config KVM_CLOCK
|
|
|
|
|
bool "KVM paravirtualized clock"
|
|
|
|
|
select PARAVIRT
|
2008-06-03 10:17:32 -04:00
|
|
|
select PARAVIRT_CLOCK
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on !X86_VOYAGER
|
2008-02-15 14:52:48 -05:00
|
|
|
help
|
|
|
|
|
Turning on this option will allow you to run a paravirtualized clock
|
|
|
|
|
when running over the KVM hypervisor. Instead of relying on a PIT
|
|
|
|
|
(or probably other) emulation by the underlying device model, the host
|
|
|
|
|
provides the guest with timing infrastructure such as time of day, and
|
|
|
|
|
system time
|
|
|
|
|
|
2008-02-22 12:21:36 -05:00
|
|
|
config KVM_GUEST
|
|
|
|
|
bool "KVM Guest support"
|
|
|
|
|
select PARAVIRT
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on !X86_VOYAGER
|
2008-02-22 12:21:36 -05:00
|
|
|
help
|
|
|
|
|
This option enables various optimizations for running under the KVM
|
|
|
|
|
hypervisor.
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
source "arch/x86/lguest/Kconfig"
|
|
|
|
|
|
2008-01-30 07:33:32 -05:00
|
|
|
config PARAVIRT
|
|
|
|
|
bool "Enable paravirtualization code"
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on !X86_VOYAGER
|
2008-01-30 07:33:32 -05:00
|
|
|
help
|
|
|
|
|
This changes the kernel so it can modify itself when it is run
|
|
|
|
|
under a hypervisor, potentially improving performance significantly
|
|
|
|
|
over full virtualization. However, when run without a hypervisor
|
|
|
|
|
the kernel is theoretically slower and slightly larger.
|
|
|
|
|
|
2008-06-03 10:17:29 -04:00
|
|
|
config PARAVIRT_CLOCK
|
|
|
|
|
bool
|
|
|
|
|
default n
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
endif
|
|
|
|
|
|
2008-06-25 00:19:14 -04:00
|
|
|
config PARAVIRT_DEBUG
|
|
|
|
|
bool "paravirt-ops debugging"
|
|
|
|
|
depends on PARAVIRT && DEBUG_KERNEL
|
|
|
|
|
help
|
|
|
|
|
Enable to debug paravirt_ops internals. Specifically, BUG if
|
|
|
|
|
a paravirt_op is missing when it is called.
|
|
|
|
|
|
2008-04-18 20:49:15 -04:00
|
|
|
config MEMTEST
|
|
|
|
|
bool "Memtest"
|
2008-03-21 21:56:19 -04:00
|
|
|
help
|
|
|
|
|
This option adds a kernel parameter 'memtest', which allows memtest
|
2008-04-18 20:49:15 -04:00
|
|
|
to be set.
|
|
|
|
|
memtest=0, mean disabled; -- default
|
|
|
|
|
memtest=1, mean do 1 test pattern;
|
|
|
|
|
...
|
|
|
|
|
memtest=4, mean do 4 test patterns.
|
2008-07-15 08:48:48 -04:00
|
|
|
If you are unsure how to answer this question, answer N.
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config X86_SUMMIT_NUMA
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2008-06-17 18:39:01 -04:00
|
|
|
depends on X86_32 && NUMA && X86_GENERICARCH
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config X86_CYCLONE_TIMER
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2008-06-17 18:39:01 -04:00
|
|
|
depends on X86_GENERICARCH
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config ES7000_CLUSTERED_APIC
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on SMP && X86_ES7000 && MPENTIUMIII
|
|
|
|
|
|
|
|
|
|
source "arch/x86/Kconfig.cpu"
|
|
|
|
|
|
|
|
|
|
config HPET_TIMER
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool X86_64
|
2007-11-09 15:56:54 -05:00
|
|
|
prompt "HPET Timer Support" if X86_32
|
|
|
|
|
help
|
|
|
|
|
Use the IA-PC HPET (High Precision Event Timer) to manage
|
|
|
|
|
time in preference to the PIT and RTC, if a HPET is
|
|
|
|
|
present.
|
|
|
|
|
HPET is the next generation timer replacing legacy 8254s.
|
|
|
|
|
The HPET provides a stable time base on SMP
|
|
|
|
|
systems, unlike the TSC, but it is more expensive to access,
|
|
|
|
|
as it is off-chip. You can find the HPET spec at
|
|
|
|
|
<http://www.intel.com/hardwaredesign/hpetspec.htm>.
|
|
|
|
|
|
|
|
|
|
You can safely choose Y here. However, HPET will only be
|
|
|
|
|
activated if the platform and the BIOS support this feature.
|
|
|
|
|
Otherwise the 8254 will be used for timing services.
|
|
|
|
|
|
|
|
|
|
Choose N to continue using the legacy 8254 timer.
|
|
|
|
|
|
|
|
|
|
config HPET_EMULATE_RTC
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2008-02-06 04:38:52 -05:00
|
|
|
depends on HPET_TIMER && (RTC=y || RTC=m || RTC_DRV_CMOS=m || RTC_DRV_CMOS=y)
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
# Mark as embedded because too many people got it wrong.
|
|
|
|
|
# The code disables itself when not needed.
|
2008-04-28 05:14:14 -04:00
|
|
|
config DMI
|
|
|
|
|
default y
|
|
|
|
|
bool "Enable DMI scanning" if EMBEDDED
|
|
|
|
|
help
|
|
|
|
|
Enabled scanning of DMI to identify machine quirks. Say Y
|
|
|
|
|
here unless you have verified that your setup is not
|
|
|
|
|
affected by entries in the DMI blacklist. Required by PNP
|
|
|
|
|
BIOS code.
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
config GART_IOMMU
|
|
|
|
|
bool "GART IOMMU support" if EMBEDDED
|
|
|
|
|
default y
|
|
|
|
|
select SWIOTLB
|
|
|
|
|
select AGP
|
|
|
|
|
depends on X86_64 && PCI
|
|
|
|
|
help
|
|
|
|
|
Support for full DMA access of devices with 32bit memory access only
|
|
|
|
|
on systems with more than 3GB. This is usually needed for USB,
|
|
|
|
|
sound, many IDE/SATA chipsets and some other devices.
|
|
|
|
|
Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
|
|
|
|
|
based hardware IOMMU and a software bounce buffer based IOMMU used
|
|
|
|
|
on Intel systems and as fallback.
|
|
|
|
|
The code is only active when needed (enough memory and limited
|
|
|
|
|
device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
|
|
|
|
|
too.
|
|
|
|
|
|
|
|
|
|
config CALGARY_IOMMU
|
|
|
|
|
bool "IBM Calgary IOMMU support"
|
|
|
|
|
select SWIOTLB
|
|
|
|
|
depends on X86_64 && PCI && EXPERIMENTAL
|
|
|
|
|
help
|
|
|
|
|
Support for hardware IOMMUs in IBM's xSeries x366 and x460
|
|
|
|
|
systems. Needed to run systems with more than 3GB of memory
|
|
|
|
|
properly with 32-bit PCI devices that do not support DAC
|
|
|
|
|
(Double Address Cycle). Calgary also supports bus level
|
|
|
|
|
isolation, where all DMAs pass through the IOMMU. This
|
|
|
|
|
prevents them from going anywhere except their intended
|
|
|
|
|
destination. This catches hard-to-find kernel bugs and
|
|
|
|
|
mis-behaving drivers and devices that do not use the DMA-API
|
|
|
|
|
properly to set up their DMA buffers. The IOMMU can be
|
|
|
|
|
turned off at boot time with the iommu=off parameter.
|
|
|
|
|
Normally the kernel will make the right choice by itself.
|
|
|
|
|
If unsure, say Y.
|
|
|
|
|
|
|
|
|
|
config CALGARY_IOMMU_ENABLED_BY_DEFAULT
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "Should Calgary be enabled by default?"
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on CALGARY_IOMMU
|
|
|
|
|
help
|
|
|
|
|
Should Calgary be enabled by default? if you choose 'y', Calgary
|
|
|
|
|
will be used (if it exists). If you choose 'n', Calgary will not be
|
|
|
|
|
used even if it exists. If you choose 'n' and would like to use
|
|
|
|
|
Calgary anyway, pass 'iommu=calgary' on the kernel command line.
|
|
|
|
|
If unsure, say Y.
|
|
|
|
|
|
2008-06-26 15:27:37 -04:00
|
|
|
config AMD_IOMMU
|
|
|
|
|
bool "AMD IOMMU support"
|
2008-06-27 05:31:28 -04:00
|
|
|
select SWIOTLB
|
2008-09-11 10:51:41 -04:00
|
|
|
select PCI_MSI
|
2008-06-27 04:37:03 -04:00
|
|
|
depends on X86_64 && PCI && ACPI
|
2008-06-26 15:27:37 -04:00
|
|
|
help
|
2008-07-03 13:35:06 -04:00
|
|
|
With this option you can enable support for AMD IOMMU hardware in
|
|
|
|
|
your system. An IOMMU is a hardware component which provides
|
|
|
|
|
remapping of DMA memory accesses from devices. With an AMD IOMMU you
|
|
|
|
|
can isolate the the DMA memory of different devices and protect the
|
|
|
|
|
system from misbehaving device drivers or hardware.
|
|
|
|
|
|
|
|
|
|
You can find out if your system has an AMD IOMMU if you look into
|
|
|
|
|
your BIOS for an option to enable it or if you have an IVRS ACPI
|
|
|
|
|
table.
|
2008-06-26 15:27:37 -04:00
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
# need this always selected by IOMMU for the VIA workaround
|
|
|
|
|
config SWIOTLB
|
|
|
|
|
bool
|
|
|
|
|
help
|
|
|
|
|
Support for software bounce buffers used on x86-64 systems
|
|
|
|
|
which don't have a hardware IOMMU (e.g. the current generation
|
|
|
|
|
of Intel's x86-64 CPUs). Using this PCI devices which can only
|
|
|
|
|
access 32-bits of memory can be used on systems with more than
|
|
|
|
|
3 GB of memory. If unsure, say Y.
|
|
|
|
|
|
2008-04-29 03:59:36 -04:00
|
|
|
config IOMMU_HELPER
|
2008-07-09 20:50:50 -04:00
|
|
|
def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU)
|
2008-08-25 17:15:38 -04:00
|
|
|
|
2008-05-12 15:21:12 -04:00
|
|
|
config MAXSMP
|
|
|
|
|
bool "Configure Maximum number of SMP Processors and NUMA Nodes"
|
2008-08-25 17:15:38 -04:00
|
|
|
depends on X86_64 && SMP && BROKEN
|
2008-05-12 15:21:12 -04:00
|
|
|
default n
|
|
|
|
|
help
|
|
|
|
|
Configure maximum number of CPUS and NUMA Nodes for this architecture.
|
|
|
|
|
If unsure, say N.
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config NR_CPUS
|
2008-08-25 17:15:38 -04:00
|
|
|
int "Maximum number of CPUs (2-512)" if !MAXSMP
|
|
|
|
|
range 2 512
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on SMP
|
2008-08-25 17:15:38 -04:00
|
|
|
default "4096" if MAXSMP
|
2007-11-09 15:56:54 -05:00
|
|
|
default "32" if X86_NUMAQ || X86_SUMMIT || X86_BIGSMP || X86_ES7000
|
|
|
|
|
default "8"
|
|
|
|
|
help
|
|
|
|
|
This allows you to specify the maximum number of CPUs which this
|
2008-08-25 17:15:38 -04:00
|
|
|
kernel will support. The maximum supported value is 512 and the
|
2007-11-09 15:56:54 -05:00
|
|
|
minimum value which makes sense is 2.
|
|
|
|
|
|
|
|
|
|
This is purely to save memory - each supported CPU adds
|
|
|
|
|
approximately eight kilobytes to the kernel image.
|
|
|
|
|
|
|
|
|
|
config SCHED_SMT
|
|
|
|
|
bool "SMT (Hyperthreading) scheduler support"
|
2008-02-27 16:16:30 -05:00
|
|
|
depends on X86_HT
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
|
|
|
|
SMT scheduler support improves the CPU scheduler's decision making
|
|
|
|
|
when dealing with Intel Pentium 4 chips with HyperThreading at a
|
|
|
|
|
cost of slightly increased overhead in some places. If unsure say
|
|
|
|
|
N here.
|
|
|
|
|
|
|
|
|
|
config SCHED_MC
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "Multi-core scheduler support"
|
2008-02-27 16:16:30 -05:00
|
|
|
depends on X86_HT
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
|
|
|
|
Multi-core scheduler support improves the CPU scheduler's decision
|
|
|
|
|
making when dealing with multi-core CPU chips at a cost of slightly
|
|
|
|
|
increased overhead in some places. If unsure say N here.
|
|
|
|
|
|
|
|
|
|
source "kernel/Kconfig.preempt"
|
|
|
|
|
|
|
|
|
|
config X86_UP_APIC
|
|
|
|
|
bool "Local APIC support on uniprocessors"
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on X86_32 && !SMP && !(X86_VOYAGER || X86_GENERICARCH)
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
|
|
|
|
A local APIC (Advanced Programmable Interrupt Controller) is an
|
|
|
|
|
integrated interrupt controller in the CPU. If you have a single-CPU
|
|
|
|
|
system which has a processor with a local APIC, you can say Y here to
|
|
|
|
|
enable and use it. If you say Y here even though your machine doesn't
|
|
|
|
|
have a local APIC, then the kernel will still run with no slowdown at
|
|
|
|
|
all. The local APIC supports CPU-generated self-interrupts (timer,
|
|
|
|
|
performance counters), and the NMI watchdog which detects hard
|
|
|
|
|
lockups.
|
|
|
|
|
|
|
|
|
|
config X86_UP_IOAPIC
|
|
|
|
|
bool "IO-APIC support on uniprocessors"
|
|
|
|
|
depends on X86_UP_APIC
|
|
|
|
|
help
|
|
|
|
|
An IO-APIC (I/O Advanced Programmable Interrupt Controller) is an
|
|
|
|
|
SMP-capable replacement for PC-style interrupt controllers. Most
|
|
|
|
|
SMP systems and many recent uniprocessor systems have one.
|
|
|
|
|
|
|
|
|
|
If you have a single-CPU system with an IO-APIC, you can say Y here
|
|
|
|
|
to use it. If you say Y here even though your machine doesn't have
|
|
|
|
|
an IO-APIC, then the kernel will still run with no slowdown at all.
|
|
|
|
|
|
|
|
|
|
config X86_LOCAL_APIC
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on X86_64 || (X86_32 && (X86_UP_APIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config X86_IO_APIC
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on X86_64 || (X86_32 && (X86_UP_IOAPIC || (SMP && !X86_VOYAGER) || X86_GENERICARCH))
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config X86_VISWS_APIC
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_32 && X86_VISWS
|
|
|
|
|
|
|
|
|
|
config X86_MCE
|
|
|
|
|
bool "Machine Check Exception"
|
|
|
|
|
depends on !X86_VOYAGER
|
|
|
|
|
---help---
|
|
|
|
|
Machine Check Exception support allows the processor to notify the
|
|
|
|
|
kernel if it detects a problem (e.g. overheating, component failure).
|
|
|
|
|
The action the kernel takes depends on the severity of the problem,
|
|
|
|
|
ranging from a warning message on the console, to halting the machine.
|
|
|
|
|
Your processor must be a Pentium or newer to support this - check the
|
|
|
|
|
flags in /proc/cpuinfo for mce. Note that some older Pentium systems
|
|
|
|
|
have a design flaw which leads to false MCE events - hence MCE is
|
|
|
|
|
disabled on all P5 processors, unless explicitly enabled with "mce"
|
|
|
|
|
as a boot argument. Similarly, if MCE is built in and creates a
|
|
|
|
|
problem on some new non-standard machine, you can boot with "nomce"
|
|
|
|
|
to disable it. MCE support simply ignores non-MCE processors like
|
|
|
|
|
the 386 and 486, so nearly everyone can say Y here.
|
|
|
|
|
|
|
|
|
|
config X86_MCE_INTEL
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "Intel MCE features"
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_64 && X86_MCE && X86_LOCAL_APIC
|
|
|
|
|
help
|
|
|
|
|
Additional support for intel specific MCE features such as
|
|
|
|
|
the thermal monitor.
|
|
|
|
|
|
|
|
|
|
config X86_MCE_AMD
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "AMD MCE features"
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_64 && X86_MCE && X86_LOCAL_APIC
|
|
|
|
|
help
|
|
|
|
|
Additional support for AMD specific MCE features such as
|
|
|
|
|
the DRAM Error Threshold.
|
|
|
|
|
|
|
|
|
|
config X86_MCE_NONFATAL
|
|
|
|
|
tristate "Check for non-fatal errors on AMD Athlon/Duron / Intel Pentium 4"
|
|
|
|
|
depends on X86_32 && X86_MCE
|
|
|
|
|
help
|
|
|
|
|
Enabling this feature starts a timer that triggers every 5 seconds which
|
|
|
|
|
will look at the machine check registers to see if anything happened.
|
|
|
|
|
Non-fatal problems automatically get corrected (but still logged).
|
|
|
|
|
Disable this if you don't want to see these messages.
|
|
|
|
|
Seeing the messages this option prints out may be indicative of dying
|
|
|
|
|
or out-of-spec (ie, overclocked) hardware.
|
|
|
|
|
This option only does something on certain CPUs.
|
|
|
|
|
(AMD Athlon/Duron and Intel Pentium 4)
|
|
|
|
|
|
|
|
|
|
config X86_MCE_P4THERMAL
|
|
|
|
|
bool "check for P4 thermal throttling interrupt."
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on X86_32 && X86_MCE && (X86_UP_APIC || SMP)
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
|
|
|
|
Enabling this feature will cause a message to be printed when the P4
|
|
|
|
|
enters thermal throttling.
|
|
|
|
|
|
|
|
|
|
config VM86
|
|
|
|
|
bool "Enable VM86 support" if EMBEDDED
|
|
|
|
|
default y
|
|
|
|
|
depends on X86_32
|
|
|
|
|
help
|
|
|
|
|
This option is required by programs like DOSEMU to run 16-bit legacy
|
|
|
|
|
code on X86 processors. It also may be needed by software like
|
|
|
|
|
XFree86 to initialize some video cards via BIOS. Disabling this
|
|
|
|
|
option saves about 6k.
|
|
|
|
|
|
|
|
|
|
config TOSHIBA
|
|
|
|
|
tristate "Toshiba Laptop support"
|
|
|
|
|
depends on X86_32
|
|
|
|
|
---help---
|
|
|
|
|
This adds a driver to safely access the System Management Mode of
|
|
|
|
|
the CPU on Toshiba portables with a genuine Toshiba BIOS. It does
|
|
|
|
|
not work on models with a Phoenix BIOS. The System Management Mode
|
|
|
|
|
is used to set the BIOS and power saving options on Toshiba portables.
|
|
|
|
|
|
|
|
|
|
For information on utilities to make use of this driver see the
|
|
|
|
|
Toshiba Linux utilities web site at:
|
|
|
|
|
<http://www.buzzard.org.uk/toshiba/>.
|
|
|
|
|
|
|
|
|
|
Say Y if you intend to run this kernel on a Toshiba portable.
|
|
|
|
|
Say N otherwise.
|
|
|
|
|
|
|
|
|
|
config I8K
|
|
|
|
|
tristate "Dell laptop support"
|
|
|
|
|
---help---
|
|
|
|
|
This adds a driver to safely access the System Management Mode
|
|
|
|
|
of the CPU on the Dell Inspiron 8000. The System Management Mode
|
|
|
|
|
is used to read cpu temperature and cooling fan status and to
|
|
|
|
|
control the fans on the I8K portables.
|
|
|
|
|
|
|
|
|
|
This driver has been tested only on the Inspiron 8000 but it may
|
|
|
|
|
also work with other Dell laptops. You can force loading on other
|
|
|
|
|
models by passing the parameter `force=1' to the module. Use at
|
|
|
|
|
your own risk.
|
|
|
|
|
|
|
|
|
|
For information on utilities to make use of this driver see the
|
|
|
|
|
I8K Linux utilities web site at:
|
|
|
|
|
<http://people.debian.org/~dz/i8k/>
|
|
|
|
|
|
|
|
|
|
Say Y if you intend to run this kernel on a Dell Inspiron 8000.
|
|
|
|
|
Say N otherwise.
|
|
|
|
|
|
|
|
|
|
config X86_REBOOTFIXUPS
|
2008-10-16 01:01:38 -04:00
|
|
|
bool "Enable X86 board specific fixups for reboot"
|
|
|
|
|
depends on X86_32
|
2007-11-09 15:56:54 -05:00
|
|
|
---help---
|
|
|
|
|
This enables chipset and/or board specific fixups to be done
|
|
|
|
|
in order to get reboot to work correctly. This is only needed on
|
|
|
|
|
some combinations of hardware and BIOS. The symptom, for which
|
|
|
|
|
this config is intended, is when reboot ends with a stalled/hung
|
|
|
|
|
system.
|
|
|
|
|
|
|
|
|
|
Currently, the only fixup is for the Geode machines using
|
2008-01-30 07:33:36 -05:00
|
|
|
CS5530A and CS5536 chipsets and the RDC R-321x SoC.
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
Say Y if you want to enable the fixup. Currently, it's safe to
|
|
|
|
|
enable this option even if you don't need it.
|
|
|
|
|
Say N otherwise.
|
|
|
|
|
|
|
|
|
|
config MICROCODE
|
2008-07-28 12:44:21 -04:00
|
|
|
tristate "/dev/cpu/microcode - microcode support"
|
2007-11-09 15:56:54 -05:00
|
|
|
select FW_LOADER
|
|
|
|
|
---help---
|
|
|
|
|
If you say Y here, you will be able to update the microcode on
|
2008-07-28 12:44:22 -04:00
|
|
|
certain Intel and AMD processors. The Intel support is for the
|
|
|
|
|
IA32 family, e.g. Pentium Pro, Pentium II, Pentium III,
|
|
|
|
|
Pentium 4, Xeon etc. The AMD support is for family 0x10 and
|
|
|
|
|
0x11 processors, e.g. Opteron, Phenom and Turion 64 Ultra.
|
|
|
|
|
You will obviously need the actual microcode binary data itself
|
|
|
|
|
which is not shipped with the Linux kernel.
|
2007-11-09 15:56:54 -05:00
|
|
|
|
2008-07-28 12:44:21 -04:00
|
|
|
This option selects the general module only, you need to select
|
|
|
|
|
at least one vendor specific module as well.
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
|
|
|
module will be called microcode.
|
|
|
|
|
|
2008-07-28 12:44:21 -04:00
|
|
|
config MICROCODE_INTEL
|
2008-09-23 06:08:44 -04:00
|
|
|
bool "Intel microcode patch loading support"
|
2008-07-28 12:44:21 -04:00
|
|
|
depends on MICROCODE
|
|
|
|
|
default MICROCODE
|
|
|
|
|
select FW_LOADER
|
|
|
|
|
--help---
|
|
|
|
|
This options enables microcode patch loading support for Intel
|
|
|
|
|
processors.
|
|
|
|
|
|
|
|
|
|
For latest news and information on obtaining all the required
|
|
|
|
|
Intel ingredients for this driver, check:
|
|
|
|
|
<http://www.urbanmyth.org/microcode/>.
|
|
|
|
|
|
2008-07-28 12:44:22 -04:00
|
|
|
config MICROCODE_AMD
|
2008-09-23 06:08:44 -04:00
|
|
|
bool "AMD microcode patch loading support"
|
2008-07-28 12:44:22 -04:00
|
|
|
depends on MICROCODE
|
|
|
|
|
select FW_LOADER
|
|
|
|
|
--help---
|
|
|
|
|
If you select this option, microcode patch loading support for AMD
|
|
|
|
|
processors will be enabled.
|
|
|
|
|
|
2008-07-28 12:44:21 -04:00
|
|
|
config MICROCODE_OLD_INTERFACE
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on MICROCODE
|
|
|
|
|
|
|
|
|
|
config X86_MSR
|
|
|
|
|
tristate "/dev/cpu/*/msr - Model-specific register support"
|
|
|
|
|
help
|
|
|
|
|
This device gives privileged processes access to the x86
|
|
|
|
|
Model-Specific Registers (MSRs). It is a character device with
|
|
|
|
|
major 202 and minors 0 to 31 for /dev/cpu/0/msr to /dev/cpu/31/msr.
|
|
|
|
|
MSR accesses are directed to a specific CPU on multi-processor
|
|
|
|
|
systems.
|
|
|
|
|
|
|
|
|
|
config X86_CPUID
|
|
|
|
|
tristate "/dev/cpu/*/cpuid - CPU information support"
|
|
|
|
|
help
|
|
|
|
|
This device gives processes access to the x86 CPUID instruction to
|
|
|
|
|
be executed on a specific processor. It is a character device
|
|
|
|
|
with major 203 and minors 0 to 31 for /dev/cpu/0/cpuid to
|
|
|
|
|
/dev/cpu/31/cpuid.
|
|
|
|
|
|
|
|
|
|
choice
|
|
|
|
|
prompt "High Memory Support"
|
|
|
|
|
default HIGHMEM4G if !X86_NUMAQ
|
|
|
|
|
default HIGHMEM64G if X86_NUMAQ
|
|
|
|
|
depends on X86_32
|
|
|
|
|
|
|
|
|
|
config NOHIGHMEM
|
|
|
|
|
bool "off"
|
|
|
|
|
depends on !X86_NUMAQ
|
|
|
|
|
---help---
|
|
|
|
|
Linux can use up to 64 Gigabytes of physical memory on x86 systems.
|
|
|
|
|
However, the address space of 32-bit x86 processors is only 4
|
|
|
|
|
Gigabytes large. That means that, if you have a large amount of
|
|
|
|
|
physical memory, not all of it can be "permanently mapped" by the
|
|
|
|
|
kernel. The physical memory that's not permanently mapped is called
|
|
|
|
|
"high memory".
|
|
|
|
|
|
|
|
|
|
If you are compiling a kernel which will never run on a machine with
|
|
|
|
|
more than 1 Gigabyte total physical RAM, answer "off" here (default
|
|
|
|
|
choice and suitable for most users). This will result in a "3GB/1GB"
|
|
|
|
|
split: 3GB are mapped so that each process sees a 3GB virtual memory
|
|
|
|
|
space and the remaining part of the 4GB virtual memory space is used
|
|
|
|
|
by the kernel to permanently map as much physical memory as
|
|
|
|
|
possible.
|
|
|
|
|
|
|
|
|
|
If the machine has between 1 and 4 Gigabytes physical RAM, then
|
|
|
|
|
answer "4GB" here.
|
|
|
|
|
|
|
|
|
|
If more than 4 Gigabytes is used then answer "64GB" here. This
|
|
|
|
|
selection turns Intel PAE (Physical Address Extension) mode on.
|
|
|
|
|
PAE implements 3-level paging on IA32 processors. PAE is fully
|
|
|
|
|
supported by Linux, PAE mode is implemented on all recent Intel
|
|
|
|
|
processors (Pentium Pro and better). NOTE: If you say "64GB" here,
|
|
|
|
|
then the kernel will not boot on CPUs that don't support PAE!
|
|
|
|
|
|
|
|
|
|
The actual amount of total physical memory will either be
|
|
|
|
|
auto detected or can be forced by using a kernel command line option
|
|
|
|
|
such as "mem=256M". (Try "man bootparam" or see the documentation of
|
|
|
|
|
your boot loader (lilo or loadlin) about how to pass options to the
|
|
|
|
|
kernel at boot time.)
|
|
|
|
|
|
|
|
|
|
If unsure, say "off".
|
|
|
|
|
|
|
|
|
|
config HIGHMEM4G
|
|
|
|
|
bool "4GB"
|
|
|
|
|
depends on !X86_NUMAQ
|
|
|
|
|
help
|
|
|
|
|
Select this if you have a 32-bit processor and between 1 and 4
|
|
|
|
|
gigabytes of physical RAM.
|
|
|
|
|
|
|
|
|
|
config HIGHMEM64G
|
|
|
|
|
bool "64GB"
|
|
|
|
|
depends on !M386 && !M486
|
|
|
|
|
select X86_PAE
|
|
|
|
|
help
|
|
|
|
|
Select this if you have a 32-bit processor and more than 4
|
|
|
|
|
gigabytes of physical RAM.
|
|
|
|
|
|
|
|
|
|
endchoice
|
|
|
|
|
|
|
|
|
|
choice
|
|
|
|
|
depends on EXPERIMENTAL
|
|
|
|
|
prompt "Memory split" if EMBEDDED
|
|
|
|
|
default VMSPLIT_3G
|
|
|
|
|
depends on X86_32
|
|
|
|
|
help
|
|
|
|
|
Select the desired split between kernel and user memory.
|
|
|
|
|
|
|
|
|
|
If the address range available to the kernel is less than the
|
|
|
|
|
physical memory installed, the remaining memory will be available
|
|
|
|
|
as "high memory". Accessing high memory is a little more costly
|
|
|
|
|
than low memory, as it needs to be mapped into the kernel first.
|
|
|
|
|
Note that increasing the kernel address space limits the range
|
|
|
|
|
available to user programs, making the address space there
|
|
|
|
|
tighter. Selecting anything other than the default 3G/1G split
|
|
|
|
|
will also likely make your kernel incompatible with binary-only
|
|
|
|
|
kernel modules.
|
|
|
|
|
|
|
|
|
|
If you are not absolutely sure what you are doing, leave this
|
|
|
|
|
option alone!
|
|
|
|
|
|
|
|
|
|
config VMSPLIT_3G
|
|
|
|
|
bool "3G/1G user/kernel split"
|
|
|
|
|
config VMSPLIT_3G_OPT
|
|
|
|
|
depends on !X86_PAE
|
|
|
|
|
bool "3G/1G user/kernel split (for full 1G low memory)"
|
|
|
|
|
config VMSPLIT_2G
|
|
|
|
|
bool "2G/2G user/kernel split"
|
|
|
|
|
config VMSPLIT_2G_OPT
|
|
|
|
|
depends on !X86_PAE
|
|
|
|
|
bool "2G/2G user/kernel split (for full 2G low memory)"
|
|
|
|
|
config VMSPLIT_1G
|
|
|
|
|
bool "1G/3G user/kernel split"
|
|
|
|
|
endchoice
|
|
|
|
|
|
|
|
|
|
config PAGE_OFFSET
|
|
|
|
|
hex
|
|
|
|
|
default 0xB0000000 if VMSPLIT_3G_OPT
|
|
|
|
|
default 0x80000000 if VMSPLIT_2G
|
|
|
|
|
default 0x78000000 if VMSPLIT_2G_OPT
|
|
|
|
|
default 0x40000000 if VMSPLIT_1G
|
|
|
|
|
default 0xC0000000
|
|
|
|
|
depends on X86_32
|
|
|
|
|
|
|
|
|
|
config HIGHMEM
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_32 && (HIGHMEM64G || HIGHMEM4G)
|
|
|
|
|
|
|
|
|
|
config X86_PAE
|
2008-10-16 01:01:38 -04:00
|
|
|
bool "PAE (Physical Address Extension) Support"
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_32 && !HIGHMEM4G
|
|
|
|
|
help
|
|
|
|
|
PAE is required for NX support, and furthermore enables
|
|
|
|
|
larger swapspace support for non-overcommit purposes. It
|
|
|
|
|
has the cost of more pagetable lookup overhead, and also
|
|
|
|
|
consumes more pagetable space per process.
|
|
|
|
|
|
2008-09-11 04:31:45 -04:00
|
|
|
config ARCH_PHYS_ADDR_T_64BIT
|
|
|
|
|
def_bool X86_64 || X86_PAE
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
# Common NUMA Features
|
|
|
|
|
config NUMA
|
|
|
|
|
bool "Numa Memory Allocation and Scheduler Support (EXPERIMENTAL)"
|
|
|
|
|
depends on SMP
|
2008-11-12 17:26:14 -05:00
|
|
|
depends on X86_64 || (X86_32 && HIGHMEM64G && (X86_NUMAQ || X86_BIGSMP || X86_SUMMIT && ACPI) && EXPERIMENTAL)
|
2007-11-09 15:56:54 -05:00
|
|
|
default n if X86_PC
|
2008-06-17 18:39:01 -04:00
|
|
|
default y if (X86_NUMAQ || X86_SUMMIT || X86_BIGSMP)
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
|
|
|
|
Enable NUMA (Non Uniform Memory Access) support.
|
|
|
|
|
The kernel will try to allocate memory used by a CPU on the
|
|
|
|
|
local memory controller of the CPU and add some more
|
|
|
|
|
NUMA awareness to the kernel.
|
|
|
|
|
|
2008-08-14 11:16:50 -04:00
|
|
|
For 32-bit this is currently highly experimental and should be only
|
2007-11-09 15:56:54 -05:00
|
|
|
used for kernel development. It might also cause boot failures.
|
2008-08-14 11:16:50 -04:00
|
|
|
For 64-bit this is recommended on all multiprocessor Opteron systems.
|
2007-11-09 15:56:54 -05:00
|
|
|
If the system is EM64T, you should say N unless your system is
|
|
|
|
|
EM64T NUMA.
|
|
|
|
|
|
|
|
|
|
comment "NUMA (Summit) requires SMP, 64GB highmem support, ACPI"
|
|
|
|
|
depends on X86_32 && X86_SUMMIT && (!HIGHMEM64G || !ACPI)
|
|
|
|
|
|
|
|
|
|
config K8_NUMA
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "Old style AMD Opteron NUMA detection"
|
|
|
|
|
depends on X86_64 && NUMA && PCI
|
|
|
|
|
help
|
2007-11-09 15:56:54 -05:00
|
|
|
Enable K8 NUMA node topology detection. You should say Y here if
|
|
|
|
|
you have a multi processor AMD K8 system. This uses an old
|
|
|
|
|
method to read the NUMA configuration directly from the builtin
|
|
|
|
|
Northbridge of Opteron. It is recommended to use X86_64_ACPI_NUMA
|
|
|
|
|
instead, which also takes priority if both are compiled in.
|
|
|
|
|
|
|
|
|
|
config X86_64_ACPI_NUMA
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "ACPI NUMA detection"
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_64 && NUMA && ACPI && PCI
|
|
|
|
|
select ACPI_NUMA
|
|
|
|
|
help
|
|
|
|
|
Enable ACPI SRAT based node topology detection.
|
|
|
|
|
|
2008-03-25 13:14:35 -04:00
|
|
|
# Some NUMA nodes have memory ranges that span
|
|
|
|
|
# other nodes. Even though a pfn is valid and
|
|
|
|
|
# between a node's start and end pfns, it may not
|
|
|
|
|
# reside on that node. See memmap_init_zone()
|
|
|
|
|
# for details.
|
|
|
|
|
config NODES_SPAN_OTHER_NODES
|
|
|
|
|
def_bool y
|
|
|
|
|
depends on X86_64_ACPI_NUMA
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
config NUMA_EMU
|
|
|
|
|
bool "NUMA emulation"
|
|
|
|
|
depends on X86_64 && NUMA
|
|
|
|
|
help
|
|
|
|
|
Enable NUMA emulation. A flat machine will be split
|
|
|
|
|
into virtual nodes when booted with "numa=fake=N", where N is the
|
|
|
|
|
number of nodes. This is only useful for debugging.
|
|
|
|
|
|
|
|
|
|
config NODES_SHIFT
|
2008-08-25 17:15:38 -04:00
|
|
|
int "Maximum NUMA Nodes (as a power of 2)" if !MAXSMP
|
2008-05-12 15:21:12 -04:00
|
|
|
range 1 9 if X86_64
|
2008-08-25 17:15:38 -04:00
|
|
|
default "9" if MAXSMP
|
2007-11-09 15:56:54 -05:00
|
|
|
default "6" if X86_64
|
|
|
|
|
default "4" if X86_NUMAQ
|
|
|
|
|
default "3"
|
|
|
|
|
depends on NEED_MULTIPLE_NODES
|
2008-05-12 15:21:12 -04:00
|
|
|
help
|
|
|
|
|
Specify the maximum number of NUMA Nodes available on the target
|
|
|
|
|
system. Increases memory reserved to accomodate various tables.
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config HAVE_ARCH_BOOTMEM_NODE
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_32 && NUMA
|
|
|
|
|
|
|
|
|
|
config ARCH_HAVE_MEMORY_PRESENT
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_32 && DISCONTIGMEM
|
|
|
|
|
|
|
|
|
|
config NEED_NODE_MEMMAP_SIZE
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_32 && (DISCONTIGMEM || SPARSEMEM)
|
|
|
|
|
|
|
|
|
|
config HAVE_ARCH_ALLOC_REMAP
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_32 && NUMA
|
|
|
|
|
|
|
|
|
|
config ARCH_FLATMEM_ENABLE
|
|
|
|
|
def_bool y
|
2008-08-06 07:09:53 -04:00
|
|
|
depends on X86_32 && ARCH_SELECT_MEMORY_MODEL && !NUMA
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config ARCH_DISCONTIGMEM_ENABLE
|
|
|
|
|
def_bool y
|
2008-01-30 07:30:47 -05:00
|
|
|
depends on NUMA && X86_32
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config ARCH_DISCONTIGMEM_DEFAULT
|
|
|
|
|
def_bool y
|
2008-01-30 07:30:47 -05:00
|
|
|
depends on NUMA && X86_32
|
|
|
|
|
|
|
|
|
|
config ARCH_SPARSEMEM_DEFAULT
|
|
|
|
|
def_bool y
|
|
|
|
|
depends on X86_64
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config ARCH_SPARSEMEM_ENABLE
|
|
|
|
|
def_bool y
|
2008-08-06 07:09:53 -04:00
|
|
|
depends on X86_64 || NUMA || (EXPERIMENTAL && X86_PC) || X86_GENERICARCH
|
2007-11-09 15:56:54 -05:00
|
|
|
select SPARSEMEM_STATIC if X86_32
|
|
|
|
|
select SPARSEMEM_VMEMMAP_ENABLE if X86_64
|
|
|
|
|
|
|
|
|
|
config ARCH_SELECT_MEMORY_MODEL
|
|
|
|
|
def_bool y
|
2008-01-30 07:30:47 -05:00
|
|
|
depends on ARCH_SPARSEMEM_ENABLE
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config ARCH_MEMORY_PROBE
|
|
|
|
|
def_bool X86_64
|
|
|
|
|
depends on MEMORY_HOTPLUG
|
|
|
|
|
|
|
|
|
|
source "mm/Kconfig"
|
|
|
|
|
|
|
|
|
|
config HIGHPTE
|
|
|
|
|
bool "Allocate 3rd-level pagetables from highmem"
|
|
|
|
|
depends on X86_32 && (HIGHMEM4G || HIGHMEM64G)
|
|
|
|
|
help
|
|
|
|
|
The VM uses one page table entry for each page of physical memory.
|
|
|
|
|
For systems with a lot of RAM, this can be wasteful of precious
|
|
|
|
|
low memory. Setting this option will put user-space page table
|
|
|
|
|
entries in high memory.
|
|
|
|
|
|
2008-09-07 04:51:34 -04:00
|
|
|
config X86_CHECK_BIOS_CORRUPTION
|
|
|
|
|
bool "Check for low memory corruption"
|
|
|
|
|
help
|
|
|
|
|
Periodically check for memory corruption in low memory, which
|
|
|
|
|
is suspected to be caused by BIOS. Even when enabled in the
|
|
|
|
|
configuration, it is disabled at runtime. Enable it by
|
|
|
|
|
setting "memory_corruption_check=1" on the kernel command
|
|
|
|
|
line. By default it scans the low 64k of memory every 60
|
|
|
|
|
seconds; see the memory_corruption_check_size and
|
|
|
|
|
memory_corruption_check_period parameters in
|
|
|
|
|
Documentation/kernel-parameters.txt to adjust this.
|
|
|
|
|
|
|
|
|
|
When enabled with the default parameters, this option has
|
|
|
|
|
almost no overhead, as it reserves a relatively small amount
|
|
|
|
|
of memory and scans it infrequently. It both detects corruption
|
|
|
|
|
and prevents it from affecting the running system.
|
|
|
|
|
|
|
|
|
|
It is, however, intended as a diagnostic tool; if repeatable
|
|
|
|
|
BIOS-originated corruption always affects the same memory,
|
|
|
|
|
you can use memmap= to prevent the kernel from using that
|
|
|
|
|
memory.
|
|
|
|
|
|
2008-09-07 05:37:32 -04:00
|
|
|
config X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK
|
|
|
|
|
bool "Set the default setting of memory_corruption_check"
|
|
|
|
|
depends on X86_CHECK_BIOS_CORRUPTION
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
Set whether the default state of memory_corruption_check is
|
|
|
|
|
on or off.
|
|
|
|
|
|
2008-09-16 04:07:34 -04:00
|
|
|
config X86_RESERVE_LOW_64K
|
|
|
|
|
bool "Reserve low 64K of RAM on AMI/Phoenix BIOSen"
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
Reserve the first 64K of physical RAM on BIOSes that are known
|
|
|
|
|
to potentially corrupt that memory range. A numbers of BIOSes are
|
|
|
|
|
known to utilize this area during suspend/resume, so it must not
|
|
|
|
|
be used by the kernel.
|
|
|
|
|
|
|
|
|
|
Set this to N if you are absolutely sure that you trust the BIOS
|
|
|
|
|
to get all its memory reservations and usages right.
|
|
|
|
|
|
|
|
|
|
If you have doubts about the BIOS (e.g. suspend/resume does not
|
|
|
|
|
work or there's kernel crashes after certain hardware hotplug
|
|
|
|
|
events) and it's not AMI or Phoenix, then you might want to enable
|
|
|
|
|
X86_CHECK_BIOS_CORRUPTION=y to allow the kernel to check typical
|
|
|
|
|
corruption patterns.
|
|
|
|
|
|
|
|
|
|
Say Y if unsure.
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
config MATH_EMULATION
|
|
|
|
|
bool
|
|
|
|
|
prompt "Math emulation" if X86_32
|
|
|
|
|
---help---
|
|
|
|
|
Linux can emulate a math coprocessor (used for floating point
|
|
|
|
|
operations) if you don't have one. 486DX and Pentium processors have
|
|
|
|
|
a math coprocessor built in, 486SX and 386 do not, unless you added
|
|
|
|
|
a 487DX or 387, respectively. (The messages during boot time can
|
|
|
|
|
give you some hints here ["man dmesg"].) Everyone needs either a
|
|
|
|
|
coprocessor or this emulation.
|
|
|
|
|
|
|
|
|
|
If you don't have a math coprocessor, you need to say Y here; if you
|
|
|
|
|
say Y here even though you have a coprocessor, the coprocessor will
|
|
|
|
|
be used nevertheless. (This behavior can be changed with the kernel
|
|
|
|
|
command line option "no387", which comes handy if your coprocessor
|
|
|
|
|
is broken. Try "man bootparam" or see the documentation of your boot
|
|
|
|
|
loader (lilo or loadlin) about how to pass options to the kernel at
|
|
|
|
|
boot time.) This means that it is a good idea to say Y here if you
|
|
|
|
|
intend to use this kernel on different machines.
|
|
|
|
|
|
|
|
|
|
More information about the internals of the Linux math coprocessor
|
|
|
|
|
emulation can be found in <file:arch/x86/math-emu/README>.
|
|
|
|
|
|
|
|
|
|
If you are not sure, say Y; apart from resulting in a 66 KB bigger
|
|
|
|
|
kernel, it won't hurt.
|
|
|
|
|
|
|
|
|
|
config MTRR
|
|
|
|
|
bool "MTRR (Memory Type Range Register) support"
|
|
|
|
|
---help---
|
|
|
|
|
On Intel P6 family processors (Pentium Pro, Pentium II and later)
|
|
|
|
|
the Memory Type Range Registers (MTRRs) may be used to control
|
|
|
|
|
processor access to memory ranges. This is most useful if you have
|
|
|
|
|
a video (VGA) card on a PCI or AGP bus. Enabling write-combining
|
|
|
|
|
allows bus write transfers to be combined into a larger transfer
|
|
|
|
|
before bursting over the PCI/AGP bus. This can increase performance
|
|
|
|
|
of image write operations 2.5 times or more. Saying Y here creates a
|
|
|
|
|
/proc/mtrr file which may be used to manipulate your processor's
|
|
|
|
|
MTRRs. Typically the X server should use this.
|
|
|
|
|
|
|
|
|
|
This code has a reasonably generic interface so that similar
|
|
|
|
|
control registers on other processors can be easily supported
|
|
|
|
|
as well:
|
|
|
|
|
|
|
|
|
|
The Cyrix 6x86, 6x86MX and M II processors have Address Range
|
|
|
|
|
Registers (ARRs) which provide a similar functionality to MTRRs. For
|
|
|
|
|
these, the ARRs are used to emulate the MTRRs.
|
|
|
|
|
The AMD K6-2 (stepping 8 and above) and K6-3 processors have two
|
|
|
|
|
MTRRs. The Centaur C6 (WinChip) has 8 MCRs, allowing
|
|
|
|
|
write-combining. All of these processors are supported by this code
|
|
|
|
|
and it makes sense to say Y here if you have one of them.
|
|
|
|
|
|
|
|
|
|
Saying Y here also fixes a problem with buggy SMP BIOSes which only
|
|
|
|
|
set the MTRRs for the boot CPU and not for the secondary CPUs. This
|
|
|
|
|
can lead to all sorts of problems, so it's good to say Y here.
|
|
|
|
|
|
|
|
|
|
You can safely say Y even if your machine doesn't have MTRRs, you'll
|
|
|
|
|
just add about 9 KB to your kernel.
|
|
|
|
|
|
2008-07-26 20:54:22 -04:00
|
|
|
See <file:Documentation/x86/mtrr.txt> for more information.
|
2007-11-09 15:56:54 -05:00
|
|
|
|
2008-04-29 06:52:33 -04:00
|
|
|
config MTRR_SANITIZER
|
x86: change MTRR_SANITIZER to def_bool y
This option has been added in v2.6.26 as a default-disabled
feature and went through several revisions since then.
The feature fixes a wide range of MTRR setup problems that BIOSes
leave us with: slow system, slow Xorg, slow system when adding lots
of RAM, etc., so we want to enable it by default for v2.6.28.
See:
[Bug 10508] Upgrade to 4GB of RAM messes up MTRRs
http://bugzilla.kernel.org/show_bug.cgi?id=10508
and the test results in:
http://lkml.org/lkml/2008/9/29/273
1. hpa
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x13c000000 (5056MB), size= 64MB: uncachable, count=1
reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg04: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1
reg05: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 128M num_reg: 6 lose RAM: 0M
range0: 0000000000000000 - 00000000c0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
hole: 00000000bf700000 - 00000000c0000000
Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC
Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC
range0: 0000000100000000 - 0000000140000000
Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB
hole: 000000013c000000 - 0000000140000000
Setting variable MTRR 5, base: 5056MB, range: 64MB, type UC
2. Dylan Taft
reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg01: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg02: base=0x120000000 (4608MB), size= 256MB: write-back, count=1
reg03: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
reg04: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg05: base=0xc7e00000 (3198MB), size= 2MB: uncachable, count=1
reg06: base=0xc8000000 (3200MB), size= 128MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 4M num_reg: 6 lose RAM: 0M
range0: 0000000000000000 - 00000000c8000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB
hole: 00000000c7e00000 - 00000000c8000000
Setting variable MTRR 3, base: 3198MB, range: 2MB, type UC
rangeX: 0000000100000000 - 0000000130000000
Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB
3. Gabriel
reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1
reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1
reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 16M num_reg: 7 lose RAM: 0M
range0: 0000000000000000 - 00000000d0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB
hole: 00000000cf600000 - 00000000cf800000
Setting variable MTRR 3, base: 3318MB, range: 2MB, type UC
rangeX: 0000000100000000 - 000000012c000000
Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
Setting variable MTRR 5, base: 4608MB, range: 128MB, type WB
Setting variable MTRR 6, base: 4736MB, range: 64MB, type WB
4. Mika Fischer
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg03: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1
reg04: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 16M num_reg: 5 lose RAM: 0M
range0: 0000000000000000 - 00000000c0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
hole: 00000000bf700000 - 00000000c0000000
Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC
Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC
rangeX: 0000000100000000 - 0000000140000000
Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 19:29:40 -04:00
|
|
|
def_bool y
|
2008-04-29 06:52:33 -04:00
|
|
|
prompt "MTRR cleanup support"
|
|
|
|
|
depends on MTRR
|
|
|
|
|
help
|
2008-07-15 08:48:48 -04:00
|
|
|
Convert MTRR layout from continuous to discrete, so X drivers can
|
|
|
|
|
add writeback entries.
|
2008-04-29 06:52:33 -04:00
|
|
|
|
2008-07-15 08:48:48 -04:00
|
|
|
Can be disabled with disable_mtrr_cleanup on the kernel command line.
|
|
|
|
|
The largest mtrr entry size for a continous block can be set with
|
|
|
|
|
mtrr_chunk_size.
|
2008-04-29 06:52:33 -04:00
|
|
|
|
x86: change MTRR_SANITIZER to def_bool y
This option has been added in v2.6.26 as a default-disabled
feature and went through several revisions since then.
The feature fixes a wide range of MTRR setup problems that BIOSes
leave us with: slow system, slow Xorg, slow system when adding lots
of RAM, etc., so we want to enable it by default for v2.6.28.
See:
[Bug 10508] Upgrade to 4GB of RAM messes up MTRRs
http://bugzilla.kernel.org/show_bug.cgi?id=10508
and the test results in:
http://lkml.org/lkml/2008/9/29/273
1. hpa
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x13c000000 (5056MB), size= 64MB: uncachable, count=1
reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg04: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1
reg05: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 128M num_reg: 6 lose RAM: 0M
range0: 0000000000000000 - 00000000c0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
hole: 00000000bf700000 - 00000000c0000000
Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC
Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC
range0: 0000000100000000 - 0000000140000000
Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB
hole: 000000013c000000 - 0000000140000000
Setting variable MTRR 5, base: 5056MB, range: 64MB, type UC
2. Dylan Taft
reg00: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg01: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg02: base=0x120000000 (4608MB), size= 256MB: write-back, count=1
reg03: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
reg04: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg05: base=0xc7e00000 (3198MB), size= 2MB: uncachable, count=1
reg06: base=0xc8000000 (3200MB), size= 128MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 4M num_reg: 6 lose RAM: 0M
range0: 0000000000000000 - 00000000c8000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 128MB, type WB
hole: 00000000c7e00000 - 00000000c8000000
Setting variable MTRR 3, base: 3198MB, range: 2MB, type UC
rangeX: 0000000100000000 - 0000000130000000
Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
Setting variable MTRR 5, base: 4608MB, range: 256MB, type WB
3. Gabriel
reg00: base=0xd0000000 (3328MB), size= 256MB: uncachable, count=1
reg01: base=0xe0000000 (3584MB), size= 512MB: uncachable, count=1
reg02: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg03: base=0x100000000 (4096MB), size= 512MB: write-back, count=1
reg04: base=0x120000000 (4608MB), size= 128MB: write-back, count=1
reg05: base=0x128000000 (4736MB), size= 64MB: write-back, count=1
reg06: base=0xcf600000 (3318MB), size= 2MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 16M num_reg: 7 lose RAM: 0M
range0: 0000000000000000 - 00000000d0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 256MB, type WB
hole: 00000000cf600000 - 00000000cf800000
Setting variable MTRR 3, base: 3318MB, range: 2MB, type UC
rangeX: 0000000100000000 - 000000012c000000
Setting variable MTRR 4, base: 4096MB, range: 512MB, type WB
Setting variable MTRR 5, base: 4608MB, range: 128MB, type WB
Setting variable MTRR 6, base: 4736MB, range: 64MB, type WB
4. Mika Fischer
reg00: base=0xc0000000 (3072MB), size=1024MB: uncachable, count=1
reg01: base=0x00000000 ( 0MB), size=4096MB: write-back, count=1
reg02: base=0x100000000 (4096MB), size=1024MB: write-back, count=1
reg03: base=0xbf700000 (3063MB), size= 1MB: uncachable, count=1
reg04: base=0xbf800000 (3064MB), size= 8MB: uncachable, count=1
will get
Found optimal setting for mtrr clean up
gran_size: 1M chunk_size: 16M num_reg: 5 lose RAM: 0M
range0: 0000000000000000 - 00000000c0000000
Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB
Setting variable MTRR 1, base: 2048MB, range: 1024MB, type WB
hole: 00000000bf700000 - 00000000c0000000
Setting variable MTRR 2, base: 3063MB, range: 1MB, type UC
Setting variable MTRR 3, base: 3064MB, range: 8MB, type UC
rangeX: 0000000100000000 - 0000000140000000
Setting variable MTRR 4, base: 4096MB, range: 1024MB, type WB
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-30 19:29:40 -04:00
|
|
|
If unsure, say Y.
|
2008-04-29 06:52:33 -04:00
|
|
|
|
|
|
|
|
config MTRR_SANITIZER_ENABLE_DEFAULT
|
2008-04-29 23:25:58 -04:00
|
|
|
int "MTRR cleanup enable value (0-1)"
|
|
|
|
|
range 0 1
|
|
|
|
|
default "0"
|
2008-04-29 06:52:33 -04:00
|
|
|
depends on MTRR_SANITIZER
|
|
|
|
|
help
|
2008-04-29 23:25:58 -04:00
|
|
|
Enable mtrr cleanup default value
|
2008-04-29 06:52:33 -04:00
|
|
|
|
2008-05-02 05:40:22 -04:00
|
|
|
config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT
|
|
|
|
|
int "MTRR cleanup spare reg num (0-7)"
|
|
|
|
|
range 0 7
|
|
|
|
|
default "1"
|
|
|
|
|
depends on MTRR_SANITIZER
|
|
|
|
|
help
|
|
|
|
|
mtrr cleanup spare entries default, it can be changed via
|
2008-07-15 08:48:48 -04:00
|
|
|
mtrr_spare_reg_nr=N on the kernel command line.
|
2008-05-02 05:40:22 -04:00
|
|
|
|
2008-03-18 20:00:14 -04:00
|
|
|
config X86_PAT
|
2008-04-26 04:26:52 -04:00
|
|
|
bool
|
2008-03-18 20:00:14 -04:00
|
|
|
prompt "x86 PAT support"
|
2008-04-26 04:26:52 -04:00
|
|
|
depends on MTRR
|
2008-03-18 20:00:14 -04:00
|
|
|
help
|
|
|
|
|
Use PAT attributes to setup page level cache control.
|
2008-03-24 17:22:35 -04:00
|
|
|
|
2008-03-18 20:00:14 -04:00
|
|
|
PATs are the modern equivalents of MTRRs and are much more
|
|
|
|
|
flexible than MTRRs.
|
|
|
|
|
|
|
|
|
|
Say N here if you see bootup problems (boot crash, boot hang,
|
2008-03-24 17:22:35 -04:00
|
|
|
spontaneous reboots) or a non-working video driver.
|
2008-03-18 20:00:14 -04:00
|
|
|
|
|
|
|
|
If unsure, say Y.
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
config EFI
|
2008-10-16 01:01:38 -04:00
|
|
|
bool "EFI runtime service support"
|
2008-01-30 07:31:19 -05:00
|
|
|
depends on ACPI
|
2007-11-09 15:56:54 -05:00
|
|
|
---help---
|
2008-01-30 07:32:11 -05:00
|
|
|
This enables the kernel to use EFI runtime services that are
|
2007-11-09 15:56:54 -05:00
|
|
|
available (such as the EFI variable services).
|
|
|
|
|
|
2008-01-30 07:32:11 -05:00
|
|
|
This option is only useful on systems that have EFI firmware.
|
|
|
|
|
In addition, you should use the latest ELILO loader available
|
|
|
|
|
at <http://elilo.sourceforge.net> in order to take advantage
|
|
|
|
|
of EFI runtime services. However, even with this option, the
|
|
|
|
|
resultant kernel should continue to boot on existing non-EFI
|
|
|
|
|
platforms.
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config SECCOMP
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "Enable seccomp to safely compute untrusted bytecode"
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
|
|
|
|
This kernel feature is useful for number crunching applications
|
|
|
|
|
that may need to compute untrusted bytecode during their
|
|
|
|
|
execution. By using pipes or other transports made available to
|
|
|
|
|
the process as file descriptors supporting the read/write
|
|
|
|
|
syscalls, it's possible to isolate those applications in
|
|
|
|
|
their own address space using seccomp. Once seccomp is
|
2008-09-09 03:01:31 -04:00
|
|
|
enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
|
2007-11-09 15:56:54 -05:00
|
|
|
and the task is only allowed to execute a few safe syscalls
|
|
|
|
|
defined by each seccomp mode.
|
|
|
|
|
|
|
|
|
|
If unsure, say Y. Only embedded should say N here.
|
|
|
|
|
|
|
|
|
|
config CC_STACKPROTECTOR
|
|
|
|
|
bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
|
2008-02-22 11:21:38 -05:00
|
|
|
depends on X86_64 && EXPERIMENTAL && BROKEN
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
|
|
|
|
This option turns on the -fstack-protector GCC feature. This
|
|
|
|
|
feature puts, at the beginning of critical functions, a canary
|
|
|
|
|
value on the stack just before the return address, and validates
|
|
|
|
|
the value just before actually returning. Stack based buffer
|
|
|
|
|
overflows (that need to overwrite this return address) now also
|
|
|
|
|
overwrite the canary, which gets detected and the attack is then
|
|
|
|
|
neutralized via a kernel panic.
|
|
|
|
|
|
|
|
|
|
This feature requires gcc version 4.2 or above, or a distribution
|
|
|
|
|
gcc with the feature backported. Older versions are automatically
|
|
|
|
|
detected and for those versions, this configuration option is ignored.
|
|
|
|
|
|
|
|
|
|
config CC_STACKPROTECTOR_ALL
|
|
|
|
|
bool "Use stack-protector for all functions"
|
|
|
|
|
depends on CC_STACKPROTECTOR
|
|
|
|
|
help
|
|
|
|
|
Normally, GCC only inserts the canary value protection for
|
|
|
|
|
functions that use large-ish on-stack buffers. By enabling
|
|
|
|
|
this option, GCC will be asked to do this for ALL functions.
|
|
|
|
|
|
|
|
|
|
source kernel/Kconfig.hz
|
|
|
|
|
|
|
|
|
|
config KEXEC
|
|
|
|
|
bool "kexec system call"
|
2008-04-28 04:46:58 -04:00
|
|
|
depends on X86_BIOS_REBOOT
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
|
|
|
|
kexec is a system call that implements the ability to shutdown your
|
|
|
|
|
current kernel, and to start another kernel. It is like a reboot
|
|
|
|
|
but it is independent of the system firmware. And like a reboot
|
|
|
|
|
you can start any kernel with it, not just Linux.
|
|
|
|
|
|
|
|
|
|
The name comes from the similarity to the exec system call.
|
|
|
|
|
|
|
|
|
|
It is an ongoing process to be certain the hardware in a machine
|
|
|
|
|
is properly shutdown, so do not be surprised if this code does not
|
|
|
|
|
initially work for you. It may help to enable device hotplugging
|
|
|
|
|
support. As of this writing the exact hardware interface is
|
|
|
|
|
strongly in flux, so no good recommendation can be made.
|
|
|
|
|
|
|
|
|
|
config CRASH_DUMP
|
2008-08-14 11:16:50 -04:00
|
|
|
bool "kernel crash dumps"
|
2007-11-09 15:56:54 -05:00
|
|
|
depends on X86_64 || (X86_32 && HIGHMEM)
|
|
|
|
|
help
|
|
|
|
|
Generate crash dump after being started by kexec.
|
|
|
|
|
This should be normally only set in special crash dump kernels
|
|
|
|
|
which are loaded in the main kernel with kexec-tools into
|
|
|
|
|
a specially reserved region and then later executed after
|
|
|
|
|
a crash by kdump/kexec. The crash dump kernel must be compiled
|
|
|
|
|
to a memory address not used by the main kernel or BIOS using
|
|
|
|
|
PHYSICAL_START, or it must be built as a relocatable image
|
|
|
|
|
(CONFIG_RELOCATABLE=y).
|
|
|
|
|
For more details see Documentation/kdump/kdump.txt
|
|
|
|
|
|
2008-07-25 22:45:07 -04:00
|
|
|
config KEXEC_JUMP
|
|
|
|
|
bool "kexec jump (EXPERIMENTAL)"
|
|
|
|
|
depends on EXPERIMENTAL
|
kexec jump: save/restore device state
This patch implements devices state save/restore before after kexec.
This patch together with features in kexec_jump patch can be used for
following:
- A simple hibernation implementation without ACPI support. You can kexec a
hibernating kernel, save the memory image of original system and shutdown
the system. When resuming, you restore the memory image of original system
via ordinary kexec load then jump back.
- Kernel/system debug through making system snapshot. You can make system
snapshot, jump back, do some thing and make another system snapshot.
- Cooperative multi-kernel/system. With kexec jump, you can switch between
several kernels/systems quickly without boot process except the first time.
This appears like swap a whole kernel/system out/in.
- A general method to call program in physical mode (paging turning
off). This can be used to invoke BIOS code under Linux.
The following user-space tools can be used with kexec jump:
- kexec-tools needs to be patched to support kexec jump. The patches
and the precompiled kexec can be download from the following URL:
source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2
patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2
binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10
- makedumpfile with patches are used as memory image saving tool, it
can exclude free pages from original kernel memory image file. The
patches and the precompiled makedumpfile can be download from the
following URL:
source: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-src_cvs_kh10.tar.bz2
patches: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-patches_cvs_kh10.tar.bz2
binary: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile_cvs_kh10
- An initramfs image can be used as the root file system of kexeced
kernel. An initramfs image built with "BuildRoot" can be downloaded
from the following URL:
initramfs image: http://khibernation.sourceforge.net/download/release_v10/initramfs/rootfs_cvs_kh10.gz
All user space tools above are included in the initramfs image.
Usage example of simple hibernation:
1. Compile and install patched kernel with following options selected:
CONFIG_X86_32=y
CONFIG_RELOCATABLE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PM=y
CONFIG_HIBERNATION=y
CONFIG_KEXEC_JUMP=y
2. Build an initramfs image contains kexec-tool and makedumpfile, or
download the pre-built initramfs image, called rootfs.gz in
following text.
3. Prepare a partition to save memory image of original kernel, called
hibernating partition in following text.
4. Boot kernel compiled in step 1 (kernel A).
5. In the kernel A, load kernel compiled in step 1 (kernel B) with
/sbin/kexec. The shell command line can be as follow:
/sbin/kexec --load-preserve-context /boot/bzImage --mem-min=0x100000
--mem-max=0xffffff --initrd=rootfs.gz
6. Boot the kernel B with following shell command line:
/sbin/kexec -e
7. The kernel B will boot as normal kexec. In kernel B the memory
image of kernel A can be saved into hibernating partition as
follow:
jump_back_entry=`cat /proc/cmdline | tr ' ' '\n' | grep kexec_jump_back_entry | cut -d '='`
echo $jump_back_entry > kexec_jump_back_entry
cp /proc/vmcore dump.elf
Then you can shutdown the machine as normal.
8. Boot kernel compiled in step 1 (kernel C). Use the rootfs.gz as
root file system.
9. In kernel C, load the memory image of kernel A as follow:
/sbin/kexec -l --args-none --entry=`cat kexec_jump_back_entry` dump.elf
10. Jump back to the kernel A as follow:
/sbin/kexec -e
Then, kernel A is resumed.
Implementation point:
To support jumping between two kernels, before jumping to (executing)
the new kernel and jumping back to the original kernel, the devices
are put into quiescent state, and the state of devices and CPU is
saved. After jumping back from kexeced kernel and jumping to the new
kernel, the state of devices and CPU are restored accordingly. The
devices/CPU state save/restore code of software suspend is called to
implement corresponding function.
Known issues:
- Because the segment number supported by sys_kexec_load is limited,
hibernation image with many segments may not be load. This is
planned to be eliminated by adding a new flag to sys_kexec_load to
make a image can be loaded with multiple sys_kexec_load invoking.
Now, only the i386 architecture is supported.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 22:45:10 -04:00
|
|
|
depends on KEXEC && HIBERNATION && X86_32
|
2008-07-25 22:45:07 -04:00
|
|
|
help
|
kexec jump: save/restore device state
This patch implements devices state save/restore before after kexec.
This patch together with features in kexec_jump patch can be used for
following:
- A simple hibernation implementation without ACPI support. You can kexec a
hibernating kernel, save the memory image of original system and shutdown
the system. When resuming, you restore the memory image of original system
via ordinary kexec load then jump back.
- Kernel/system debug through making system snapshot. You can make system
snapshot, jump back, do some thing and make another system snapshot.
- Cooperative multi-kernel/system. With kexec jump, you can switch between
several kernels/systems quickly without boot process except the first time.
This appears like swap a whole kernel/system out/in.
- A general method to call program in physical mode (paging turning
off). This can be used to invoke BIOS code under Linux.
The following user-space tools can be used with kexec jump:
- kexec-tools needs to be patched to support kexec jump. The patches
and the precompiled kexec can be download from the following URL:
source: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-src_git_kh10.tar.bz2
patches: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec-tools-patches_git_kh10.tar.bz2
binary: http://khibernation.sourceforge.net/download/release_v10/kexec-tools/kexec_git_kh10
- makedumpfile with patches are used as memory image saving tool, it
can exclude free pages from original kernel memory image file. The
patches and the precompiled makedumpfile can be download from the
following URL:
source: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-src_cvs_kh10.tar.bz2
patches: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile-patches_cvs_kh10.tar.bz2
binary: http://khibernation.sourceforge.net/download/release_v10/makedumpfile/makedumpfile_cvs_kh10
- An initramfs image can be used as the root file system of kexeced
kernel. An initramfs image built with "BuildRoot" can be downloaded
from the following URL:
initramfs image: http://khibernation.sourceforge.net/download/release_v10/initramfs/rootfs_cvs_kh10.gz
All user space tools above are included in the initramfs image.
Usage example of simple hibernation:
1. Compile and install patched kernel with following options selected:
CONFIG_X86_32=y
CONFIG_RELOCATABLE=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PM=y
CONFIG_HIBERNATION=y
CONFIG_KEXEC_JUMP=y
2. Build an initramfs image contains kexec-tool and makedumpfile, or
download the pre-built initramfs image, called rootfs.gz in
following text.
3. Prepare a partition to save memory image of original kernel, called
hibernating partition in following text.
4. Boot kernel compiled in step 1 (kernel A).
5. In the kernel A, load kernel compiled in step 1 (kernel B) with
/sbin/kexec. The shell command line can be as follow:
/sbin/kexec --load-preserve-context /boot/bzImage --mem-min=0x100000
--mem-max=0xffffff --initrd=rootfs.gz
6. Boot the kernel B with following shell command line:
/sbin/kexec -e
7. The kernel B will boot as normal kexec. In kernel B the memory
image of kernel A can be saved into hibernating partition as
follow:
jump_back_entry=`cat /proc/cmdline | tr ' ' '\n' | grep kexec_jump_back_entry | cut -d '='`
echo $jump_back_entry > kexec_jump_back_entry
cp /proc/vmcore dump.elf
Then you can shutdown the machine as normal.
8. Boot kernel compiled in step 1 (kernel C). Use the rootfs.gz as
root file system.
9. In kernel C, load the memory image of kernel A as follow:
/sbin/kexec -l --args-none --entry=`cat kexec_jump_back_entry` dump.elf
10. Jump back to the kernel A as follow:
/sbin/kexec -e
Then, kernel A is resumed.
Implementation point:
To support jumping between two kernels, before jumping to (executing)
the new kernel and jumping back to the original kernel, the devices
are put into quiescent state, and the state of devices and CPU is
saved. After jumping back from kexeced kernel and jumping to the new
kernel, the state of devices and CPU are restored accordingly. The
devices/CPU state save/restore code of software suspend is called to
implement corresponding function.
Known issues:
- Because the segment number supported by sys_kexec_load is limited,
hibernation image with many segments may not be load. This is
planned to be eliminated by adding a new flag to sys_kexec_load to
make a image can be loaded with multiple sys_kexec_load invoking.
Now, only the i386 architecture is supported.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 22:45:10 -04:00
|
|
|
Jump between original kernel and kexeced kernel and invoke
|
|
|
|
|
code in physical address mode via KEXEC
|
2008-07-25 22:45:07 -04:00
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
config PHYSICAL_START
|
|
|
|
|
hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
|
|
|
|
|
default "0x1000000" if X86_NUMAQ
|
|
|
|
|
default "0x200000" if X86_64
|
|
|
|
|
default "0x100000"
|
|
|
|
|
help
|
|
|
|
|
This gives the physical address where the kernel is loaded.
|
|
|
|
|
|
|
|
|
|
If kernel is a not relocatable (CONFIG_RELOCATABLE=n) then
|
|
|
|
|
bzImage will decompress itself to above physical address and
|
|
|
|
|
run from there. Otherwise, bzImage will run from the address where
|
|
|
|
|
it has been loaded by the boot loader and will ignore above physical
|
|
|
|
|
address.
|
|
|
|
|
|
|
|
|
|
In normal kdump cases one does not have to set/change this option
|
|
|
|
|
as now bzImage can be compiled as a completely relocatable image
|
|
|
|
|
(CONFIG_RELOCATABLE=y) and be used to load and run from a different
|
|
|
|
|
address. This option is mainly useful for the folks who don't want
|
|
|
|
|
to use a bzImage for capturing the crash dump and want to use a
|
|
|
|
|
vmlinux instead. vmlinux is not relocatable hence a kernel needs
|
|
|
|
|
to be specifically compiled to run from a specific memory area
|
|
|
|
|
(normally a reserved region) and this option comes handy.
|
|
|
|
|
|
|
|
|
|
So if you are using bzImage for capturing the crash dump, leave
|
|
|
|
|
the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
|
|
|
|
|
Otherwise if you plan to use vmlinux for capturing the crash dump
|
|
|
|
|
change this value to start of the reserved region (Typically 16MB
|
|
|
|
|
0x1000000). In other words, it can be set based on the "X" value as
|
|
|
|
|
specified in the "crashkernel=YM@XM" command line boot parameter
|
|
|
|
|
passed to the panic-ed kernel. Typically this parameter is set as
|
|
|
|
|
crashkernel=64M@16M. Please take a look at
|
|
|
|
|
Documentation/kdump/kdump.txt for more details about crash dumps.
|
|
|
|
|
|
|
|
|
|
Usage of bzImage for capturing the crash dump is recommended as
|
|
|
|
|
one does not have to build two kernels. Same kernel can be used
|
|
|
|
|
as production kernel and capture kernel. Above option should have
|
|
|
|
|
gone away after relocatable bzImage support is introduced. But it
|
|
|
|
|
is present because there are users out there who continue to use
|
|
|
|
|
vmlinux for dump capture. This option should go away down the
|
|
|
|
|
line.
|
|
|
|
|
|
|
|
|
|
Don't change this unless you know what you are doing.
|
|
|
|
|
|
|
|
|
|
config RELOCATABLE
|
|
|
|
|
bool "Build a relocatable kernel (EXPERIMENTAL)"
|
|
|
|
|
depends on EXPERIMENTAL
|
|
|
|
|
help
|
|
|
|
|
This builds a kernel image that retains relocation information
|
|
|
|
|
so it can be loaded someplace besides the default 1MB.
|
|
|
|
|
The relocations tend to make the kernel binary about 10% larger,
|
|
|
|
|
but are discarded at runtime.
|
|
|
|
|
|
|
|
|
|
One use is for the kexec on panic case where the recovery kernel
|
|
|
|
|
must live at a different physical address than the primary
|
|
|
|
|
kernel.
|
|
|
|
|
|
|
|
|
|
Note: If CONFIG_RELOCATABLE=y, then the kernel runs from the address
|
|
|
|
|
it has been loaded at and the compile time physical address
|
|
|
|
|
(CONFIG_PHYSICAL_START) is ignored.
|
|
|
|
|
|
|
|
|
|
config PHYSICAL_ALIGN
|
|
|
|
|
hex
|
|
|
|
|
prompt "Alignment value to which kernel should be aligned" if X86_32
|
|
|
|
|
default "0x100000" if X86_32
|
|
|
|
|
default "0x200000" if X86_64
|
|
|
|
|
range 0x2000 0x400000
|
|
|
|
|
help
|
|
|
|
|
This value puts the alignment restrictions on physical address
|
|
|
|
|
where kernel is loaded and run from. Kernel is compiled for an
|
|
|
|
|
address which meets above alignment restriction.
|
|
|
|
|
|
|
|
|
|
If bootloader loads the kernel at a non-aligned address and
|
|
|
|
|
CONFIG_RELOCATABLE is set, kernel will move itself to nearest
|
|
|
|
|
address aligned to above value and run from there.
|
|
|
|
|
|
|
|
|
|
If bootloader loads the kernel at a non-aligned address and
|
|
|
|
|
CONFIG_RELOCATABLE is not set, kernel will ignore the run time
|
|
|
|
|
load address and decompress itself to the address it has been
|
|
|
|
|
compiled for and run from there. The address for which kernel is
|
|
|
|
|
compiled already meets above alignment restrictions. Hence the
|
|
|
|
|
end result is that kernel runs from a physical address meeting
|
|
|
|
|
above alignment restrictions.
|
|
|
|
|
|
|
|
|
|
Don't change this unless you know what you are doing.
|
|
|
|
|
|
|
|
|
|
config HOTPLUG_CPU
|
2008-08-11 11:46:46 -04:00
|
|
|
bool "Support for hot-pluggable CPUs"
|
|
|
|
|
depends on SMP && HOTPLUG && !X86_VOYAGER
|
2007-11-09 15:56:54 -05:00
|
|
|
---help---
|
2008-08-11 11:46:46 -04:00
|
|
|
Say Y here to allow turning CPUs off and on. CPUs can be
|
|
|
|
|
controlled through /sys/devices/system/cpu.
|
|
|
|
|
( Note: power management support will enable this option
|
|
|
|
|
automatically on SMP systems. )
|
|
|
|
|
Say N if you want to disable CPU hotplug.
|
2007-11-09 15:56:54 -05:00
|
|
|
|
|
|
|
|
config COMPAT_VDSO
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "Compat VDSO support"
|
2008-01-30 07:30:43 -05:00
|
|
|
depends on X86_32 || IA32_EMULATION
|
2007-11-09 15:56:54 -05:00
|
|
|
help
|
2008-01-30 07:30:43 -05:00
|
|
|
Map the 32-bit VDSO to the predictable old-style address too.
|
2007-11-09 15:56:54 -05:00
|
|
|
---help---
|
|
|
|
|
Say N here if you are running a sufficiently recent glibc
|
|
|
|
|
version (2.3.3 or later), to remove the high-mapped
|
|
|
|
|
VDSO mapping and to exclusively use the randomized VDSO.
|
|
|
|
|
|
|
|
|
|
If unsure, say Y.
|
|
|
|
|
|
2008-08-12 15:52:36 -04:00
|
|
|
config CMDLINE_BOOL
|
|
|
|
|
bool "Built-in kernel command line"
|
|
|
|
|
default n
|
|
|
|
|
help
|
|
|
|
|
Allow for specifying boot arguments to the kernel at
|
|
|
|
|
build time. On some systems (e.g. embedded ones), it is
|
|
|
|
|
necessary or convenient to provide some or all of the
|
|
|
|
|
kernel boot arguments with the kernel itself (that is,
|
|
|
|
|
to not rely on the boot loader to provide them.)
|
|
|
|
|
|
|
|
|
|
To compile command line arguments into the kernel,
|
|
|
|
|
set this option to 'Y', then fill in the
|
|
|
|
|
the boot arguments in CONFIG_CMDLINE.
|
|
|
|
|
|
|
|
|
|
Systems with fully functional boot loaders (i.e. non-embedded)
|
|
|
|
|
should leave this option set to 'N'.
|
|
|
|
|
|
|
|
|
|
config CMDLINE
|
|
|
|
|
string "Built-in kernel command string"
|
|
|
|
|
depends on CMDLINE_BOOL
|
|
|
|
|
default ""
|
|
|
|
|
help
|
|
|
|
|
Enter arguments here that should be compiled into the kernel
|
|
|
|
|
image and used at boot time. If the boot loader provides a
|
|
|
|
|
command line at boot time, it is appended to this string to
|
|
|
|
|
form the full kernel command line, when the system boots.
|
|
|
|
|
|
|
|
|
|
However, you can use the CONFIG_CMDLINE_OVERRIDE option to
|
|
|
|
|
change this behavior.
|
|
|
|
|
|
|
|
|
|
In most cases, the command line (whether built-in or provided
|
|
|
|
|
by the boot loader) should specify the device for the root
|
|
|
|
|
file system.
|
|
|
|
|
|
|
|
|
|
config CMDLINE_OVERRIDE
|
|
|
|
|
bool "Built-in command line overrides boot loader arguments"
|
|
|
|
|
default n
|
|
|
|
|
depends on CMDLINE_BOOL
|
|
|
|
|
help
|
|
|
|
|
Set this option to 'Y' to have the kernel ignore the boot loader
|
|
|
|
|
command line, and use ONLY the built-in command line.
|
|
|
|
|
|
|
|
|
|
This is used to work around broken boot loaders. This should
|
|
|
|
|
be set to 'N' under normal conditions.
|
|
|
|
|
|
2007-11-09 15:56:54 -05:00
|
|
|
endmenu
|
|
|
|
|
|
|
|
|
|
config ARCH_ENABLE_MEMORY_HOTPLUG
|
|
|
|
|
def_bool y
|
|
|
|
|
depends on X86_64 || (X86_32 && HIGHMEM)
|
|
|
|
|
|
|
|
|
|
config HAVE_ARCH_EARLY_PFN_TO_NID
|
|
|
|
|
def_bool X86_64
|
|
|
|
|
depends on NUMA
|
|
|
|
|
|
2008-11-05 14:37:27 -05:00
|
|
|
menu "Power management and ACPI options"
|
2007-11-06 14:41:05 -05:00
|
|
|
depends on !X86_VOYAGER
|
|
|
|
|
|
|
|
|
|
config ARCH_HIBERNATION_HEADER
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 14:41:05 -05:00
|
|
|
depends on X86_64 && HIBERNATION
|
|
|
|
|
|
|
|
|
|
source "kernel/power/Kconfig"
|
|
|
|
|
|
|
|
|
|
source "drivers/acpi/Kconfig"
|
|
|
|
|
|
2008-01-30 07:32:49 -05:00
|
|
|
config X86_APM_BOOT
|
|
|
|
|
bool
|
|
|
|
|
default y
|
|
|
|
|
depends on APM || APM_MODULE
|
|
|
|
|
|
2007-11-06 14:41:05 -05:00
|
|
|
menuconfig APM
|
|
|
|
|
tristate "APM (Advanced Power Management) BIOS support"
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on X86_32 && PM_SLEEP
|
2007-11-06 14:41:05 -05:00
|
|
|
---help---
|
|
|
|
|
APM is a BIOS specification for saving power using several different
|
|
|
|
|
techniques. This is mostly useful for battery powered laptops with
|
|
|
|
|
APM compliant BIOSes. If you say Y here, the system time will be
|
|
|
|
|
reset after a RESUME operation, the /proc/apm device will provide
|
|
|
|
|
battery status information, and user-space programs will receive
|
|
|
|
|
notification of APM "events" (e.g. battery status change).
|
|
|
|
|
|
|
|
|
|
If you select "Y" here, you can disable actual use of the APM
|
|
|
|
|
BIOS by passing the "apm=off" option to the kernel at boot time.
|
|
|
|
|
|
|
|
|
|
Note that the APM support is almost completely disabled for
|
|
|
|
|
machines with more than one CPU.
|
|
|
|
|
|
|
|
|
|
In order to use APM, you will need supporting software. For location
|
2008-03-12 18:10:51 -04:00
|
|
|
and more information, read <file:Documentation/power/pm.txt> and the
|
2007-11-06 14:41:05 -05:00
|
|
|
Battery Powered Linux mini-HOWTO, available from
|
|
|
|
|
<http://www.tldp.org/docs.html#howto>.
|
|
|
|
|
|
|
|
|
|
This driver does not spin down disk drives (see the hdparm(8)
|
|
|
|
|
manpage ("man 8 hdparm") for that), and it doesn't turn off
|
|
|
|
|
VESA-compliant "green" monitors.
|
|
|
|
|
|
|
|
|
|
This driver does not support the TI 4000M TravelMate and the ACER
|
|
|
|
|
486/DX4/75 because they don't have compliant BIOSes. Many "green"
|
|
|
|
|
desktop machines also don't have compliant BIOSes, and this driver
|
|
|
|
|
may cause those machines to panic during the boot phase.
|
|
|
|
|
|
|
|
|
|
Generally, if you don't have a battery in your machine, there isn't
|
|
|
|
|
much point in using this driver and you should say N. If you get
|
|
|
|
|
random kernel OOPSes or reboots that don't seem to be related to
|
|
|
|
|
anything, try disabling/enabling this option (or disabling/enabling
|
|
|
|
|
APM in your BIOS).
|
|
|
|
|
|
|
|
|
|
Some other things you should try when experiencing seemingly random,
|
|
|
|
|
"weird" problems:
|
|
|
|
|
|
|
|
|
|
1) make sure that you have enough swap space and that it is
|
|
|
|
|
enabled.
|
|
|
|
|
2) pass the "no-hlt" option to the kernel
|
|
|
|
|
3) switch on floating point emulation in the kernel and pass
|
|
|
|
|
the "no387" option to the kernel
|
|
|
|
|
4) pass the "floppy=nodma" option to the kernel
|
|
|
|
|
5) pass the "mem=4M" option to the kernel (thereby disabling
|
|
|
|
|
all but the first 4 MB of RAM)
|
|
|
|
|
6) make sure that the CPU is not over clocked.
|
|
|
|
|
7) read the sig11 FAQ at <http://www.bitwizard.nl/sig11/>
|
|
|
|
|
8) disable the cache from your BIOS settings
|
|
|
|
|
9) install a fan for the video card or exchange video RAM
|
|
|
|
|
10) install a better fan for the CPU
|
|
|
|
|
11) exchange RAM chips
|
|
|
|
|
12) exchange the motherboard.
|
|
|
|
|
|
|
|
|
|
To compile this driver as a module, choose M here: the
|
|
|
|
|
module will be called apm.
|
|
|
|
|
|
|
|
|
|
if APM
|
|
|
|
|
|
|
|
|
|
config APM_IGNORE_USER_SUSPEND
|
|
|
|
|
bool "Ignore USER SUSPEND"
|
|
|
|
|
help
|
|
|
|
|
This option will ignore USER SUSPEND requests. On machines with a
|
|
|
|
|
compliant APM BIOS, you want to say N. However, on the NEC Versa M
|
|
|
|
|
series notebooks, it is necessary to say Y because of a BIOS bug.
|
|
|
|
|
|
|
|
|
|
config APM_DO_ENABLE
|
|
|
|
|
bool "Enable PM at boot time"
|
|
|
|
|
---help---
|
|
|
|
|
Enable APM features at boot time. From page 36 of the APM BIOS
|
|
|
|
|
specification: "When disabled, the APM BIOS does not automatically
|
|
|
|
|
power manage devices, enter the Standby State, enter the Suspend
|
|
|
|
|
State, or take power saving steps in response to CPU Idle calls."
|
|
|
|
|
This driver will make CPU Idle calls when Linux is idle (unless this
|
|
|
|
|
feature is turned off -- see "Do CPU IDLE calls", below). This
|
|
|
|
|
should always save battery power, but more complicated APM features
|
|
|
|
|
will be dependent on your BIOS implementation. You may need to turn
|
|
|
|
|
this option off if your computer hangs at boot time when using APM
|
|
|
|
|
support, or if it beeps continuously instead of suspending. Turn
|
|
|
|
|
this off if you have a NEC UltraLite Versa 33/C or a Toshiba
|
|
|
|
|
T400CDT. This is off by default since most machines do fine without
|
|
|
|
|
this feature.
|
|
|
|
|
|
|
|
|
|
config APM_CPU_IDLE
|
|
|
|
|
bool "Make CPU Idle calls when idle"
|
|
|
|
|
help
|
|
|
|
|
Enable calls to APM CPU Idle/CPU Busy inside the kernel's idle loop.
|
|
|
|
|
On some machines, this can activate improved power savings, such as
|
|
|
|
|
a slowed CPU clock rate, when the machine is idle. These idle calls
|
|
|
|
|
are made after the idle loop has run for some length of time (e.g.,
|
|
|
|
|
333 mS). On some machines, this will cause a hang at boot time or
|
|
|
|
|
whenever the CPU becomes idle. (On machines with more than one CPU,
|
|
|
|
|
this option does nothing.)
|
|
|
|
|
|
|
|
|
|
config APM_DISPLAY_BLANK
|
|
|
|
|
bool "Enable console blanking using APM"
|
|
|
|
|
help
|
|
|
|
|
Enable console blanking using the APM. Some laptops can use this to
|
|
|
|
|
turn off the LCD backlight when the screen blanker of the Linux
|
|
|
|
|
virtual console blanks the screen. Note that this is only used by
|
|
|
|
|
the virtual console screen blanker, and won't turn off the backlight
|
|
|
|
|
when using the X Window system. This also doesn't have anything to
|
|
|
|
|
do with your VESA-compliant power-saving monitor. Further, this
|
|
|
|
|
option doesn't work for all laptops -- it might not turn off your
|
|
|
|
|
backlight at all, or it might print a lot of errors to the console,
|
|
|
|
|
especially if you are using gpm.
|
|
|
|
|
|
|
|
|
|
config APM_ALLOW_INTS
|
|
|
|
|
bool "Allow interrupts during APM BIOS calls"
|
|
|
|
|
help
|
|
|
|
|
Normally we disable external interrupts while we are making calls to
|
|
|
|
|
the APM BIOS as a measure to lessen the effects of a badly behaving
|
|
|
|
|
BIOS implementation. The BIOS should reenable interrupts if it
|
|
|
|
|
needs to. Unfortunately, some BIOSes do not -- especially those in
|
|
|
|
|
many of the newer IBM Thinkpads. If you experience hangs when you
|
|
|
|
|
suspend, try setting this to Y. Otherwise, say N.
|
|
|
|
|
|
|
|
|
|
config APM_REAL_MODE_POWER_OFF
|
|
|
|
|
bool "Use real mode APM BIOS call to power off"
|
|
|
|
|
help
|
|
|
|
|
Use real mode APM BIOS calls to switch off the computer. This is
|
|
|
|
|
a work-around for a number of buggy BIOSes. Switch this option on if
|
|
|
|
|
your computer crashes instead of powering off properly.
|
|
|
|
|
|
|
|
|
|
endif # APM
|
|
|
|
|
|
|
|
|
|
source "arch/x86/kernel/cpu/cpufreq/Kconfig"
|
|
|
|
|
|
|
|
|
|
source "drivers/cpuidle/Kconfig"
|
|
|
|
|
|
2008-10-09 14:45:22 -04:00
|
|
|
source "drivers/idle/Kconfig"
|
|
|
|
|
|
2007-11-06 14:41:05 -05:00
|
|
|
endmenu
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
menu "Bus options (PCI etc.)"
|
|
|
|
|
|
|
|
|
|
config PCI
|
2008-05-19 08:10:14 -04:00
|
|
|
bool "PCI support"
|
2008-01-30 07:32:32 -05:00
|
|
|
default y
|
2007-11-06 14:41:05 -05:00
|
|
|
select ARCH_SUPPORTS_MSI if (X86_LOCAL_APIC && X86_IO_APIC)
|
|
|
|
|
help
|
|
|
|
|
Find out whether you have a PCI motherboard. PCI is the name of a
|
|
|
|
|
bus system, i.e. the way the CPU talks to the other stuff inside
|
|
|
|
|
your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
|
|
|
|
|
VESA. If you have PCI, say Y, otherwise N.
|
|
|
|
|
|
|
|
|
|
choice
|
|
|
|
|
prompt "PCI access mode"
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on X86_32 && PCI
|
2007-11-06 14:41:05 -05:00
|
|
|
default PCI_GOANY
|
|
|
|
|
---help---
|
|
|
|
|
On PCI systems, the BIOS can be used to detect the PCI devices and
|
|
|
|
|
determine their configuration. However, some old PCI motherboards
|
|
|
|
|
have BIOS bugs and may crash if this is done. Also, some embedded
|
|
|
|
|
PCI-based systems don't have any BIOS at all. Linux can also try to
|
|
|
|
|
detect the PCI hardware directly without using the BIOS.
|
|
|
|
|
|
|
|
|
|
With this option, you can specify how Linux should detect the
|
|
|
|
|
PCI devices. If you choose "BIOS", the BIOS will be used,
|
|
|
|
|
if you choose "Direct", the BIOS won't be used, and if you
|
|
|
|
|
choose "MMConfig", then PCI Express MMCONFIG will be used.
|
|
|
|
|
If you choose "Any", the kernel will try MMCONFIG, then the
|
|
|
|
|
direct access method and falls back to the BIOS if that doesn't
|
|
|
|
|
work. If unsure, go with the default, which is "Any".
|
|
|
|
|
|
|
|
|
|
config PCI_GOBIOS
|
|
|
|
|
bool "BIOS"
|
|
|
|
|
|
|
|
|
|
config PCI_GOMMCONFIG
|
|
|
|
|
bool "MMConfig"
|
|
|
|
|
|
|
|
|
|
config PCI_GODIRECT
|
|
|
|
|
bool "Direct"
|
|
|
|
|
|
2008-04-29 03:59:53 -04:00
|
|
|
config PCI_GOOLPC
|
|
|
|
|
bool "OLPC"
|
|
|
|
|
depends on OLPC
|
|
|
|
|
|
2008-06-05 17:14:41 -04:00
|
|
|
config PCI_GOANY
|
|
|
|
|
bool "Any"
|
|
|
|
|
|
2007-11-06 14:41:05 -05:00
|
|
|
endchoice
|
|
|
|
|
|
|
|
|
|
config PCI_BIOS
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on X86_32 && PCI && (PCI_GOBIOS || PCI_GOANY)
|
2007-11-06 14:41:05 -05:00
|
|
|
|
|
|
|
|
# x86-64 doesn't support PCI BIOS access from long mode so always go direct.
|
|
|
|
|
config PCI_DIRECT
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on PCI && (X86_64 || (PCI_GODIRECT || PCI_GOANY || PCI_GOOLPC))
|
2007-11-06 14:41:05 -05:00
|
|
|
|
|
|
|
|
config PCI_MMCONFIG
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 14:41:05 -05:00
|
|
|
depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY)
|
|
|
|
|
|
2008-04-29 03:59:53 -04:00
|
|
|
config PCI_OLPC
|
2008-06-05 17:14:41 -04:00
|
|
|
def_bool y
|
|
|
|
|
depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY)
|
2008-04-29 03:59:53 -04:00
|
|
|
|
2007-11-06 14:41:05 -05:00
|
|
|
config PCI_DOMAINS
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 14:41:05 -05:00
|
|
|
depends on PCI
|
|
|
|
|
|
|
|
|
|
config PCI_MMCONFIG
|
|
|
|
|
bool "Support mmconfig PCI config space access"
|
|
|
|
|
depends on X86_64 && PCI && ACPI
|
|
|
|
|
|
|
|
|
|
config DMAR
|
|
|
|
|
bool "Support for DMA Remapping Devices (EXPERIMENTAL)"
|
|
|
|
|
depends on X86_64 && PCI_MSI && ACPI && EXPERIMENTAL
|
|
|
|
|
help
|
|
|
|
|
DMA remapping (DMAR) devices support enables independent address
|
|
|
|
|
translations for Direct Memory Access (DMA) from devices.
|
|
|
|
|
These DMA remapping devices are reported via ACPI tables
|
|
|
|
|
and include PCI device scope covered by these DMA
|
|
|
|
|
remapping devices.
|
|
|
|
|
|
|
|
|
|
config DMAR_GFX_WA
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "Support for Graphics workaround"
|
2007-11-06 14:41:05 -05:00
|
|
|
depends on DMAR
|
|
|
|
|
help
|
|
|
|
|
Current Graphics drivers tend to use physical address
|
|
|
|
|
for DMA and avoid using DMA APIs. Setting this config
|
|
|
|
|
option permits the IOMMU driver to set a unity map for
|
|
|
|
|
all the OS-visible memory. Hence the driver can continue
|
|
|
|
|
to use physical addresses for DMA.
|
|
|
|
|
|
|
|
|
|
config DMAR_FLOPPY_WA
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 14:41:05 -05:00
|
|
|
depends on DMAR
|
|
|
|
|
help
|
|
|
|
|
Floppy disk drivers are know to bypass DMA API calls
|
|
|
|
|
thereby failing to work when IOMMU is enabled. This
|
|
|
|
|
workaround will setup a 1:1 mapping for the first
|
|
|
|
|
16M to make floppy (an ISA device) work.
|
|
|
|
|
|
2008-07-10 14:17:00 -04:00
|
|
|
config INTR_REMAP
|
|
|
|
|
bool "Support for Interrupt Remapping (EXPERIMENTAL)"
|
|
|
|
|
depends on X86_64 && X86_IO_APIC && PCI_MSI && ACPI && EXPERIMENTAL
|
|
|
|
|
help
|
|
|
|
|
Supports Interrupt remapping for IO-APIC and MSI devices.
|
|
|
|
|
To use x2apic mode in the CPU's which support x2APIC enhancements or
|
|
|
|
|
to support platforms with CPU's having > 8 bit APIC ID, say Y.
|
|
|
|
|
|
2007-11-06 14:41:05 -05:00
|
|
|
source "drivers/pci/pcie/Kconfig"
|
|
|
|
|
|
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
|
|
|
|
|
|
# x86_64 have no ISA slots, but do have ISA-style DMA.
|
|
|
|
|
config ISA_DMA_API
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 14:41:05 -05:00
|
|
|
|
|
|
|
|
if X86_32
|
|
|
|
|
|
|
|
|
|
config ISA
|
|
|
|
|
bool "ISA support"
|
2008-07-10 10:09:50 -04:00
|
|
|
depends on !X86_VOYAGER
|
2007-11-06 14:41:05 -05:00
|
|
|
help
|
|
|
|
|
Find out whether you have ISA slots on your motherboard. ISA is the
|
|
|
|
|
name of a bus system, i.e. the way the CPU talks to the other stuff
|
|
|
|
|
inside your box. Other bus systems are PCI, EISA, MicroChannel
|
|
|
|
|
(MCA) or VESA. ISA is an older system, now being displaced by PCI;
|
|
|
|
|
newer boards don't support it. If you have ISA, say Y, otherwise N.
|
|
|
|
|
|
|
|
|
|
config EISA
|
|
|
|
|
bool "EISA support"
|
|
|
|
|
depends on ISA
|
|
|
|
|
---help---
|
|
|
|
|
The Extended Industry Standard Architecture (EISA) bus was
|
|
|
|
|
developed as an open alternative to the IBM MicroChannel bus.
|
|
|
|
|
|
|
|
|
|
The EISA bus provided some of the features of the IBM MicroChannel
|
|
|
|
|
bus while maintaining backward compatibility with cards made for
|
|
|
|
|
the older ISA bus. The EISA bus saw limited use between 1988 and
|
|
|
|
|
1995 when it was made obsolete by the PCI bus.
|
|
|
|
|
|
|
|
|
|
Say Y here if you are building a kernel for an EISA-based machine.
|
|
|
|
|
|
|
|
|
|
Otherwise, say N.
|
|
|
|
|
|
|
|
|
|
source "drivers/eisa/Kconfig"
|
|
|
|
|
|
|
|
|
|
config MCA
|
2008-07-10 10:09:50 -04:00
|
|
|
bool "MCA support" if !X86_VOYAGER
|
2007-11-06 14:41:05 -05:00
|
|
|
default y if X86_VOYAGER
|
|
|
|
|
help
|
|
|
|
|
MicroChannel Architecture is found in some IBM PS/2 machines and
|
|
|
|
|
laptops. It is a bus system similar to PCI or ISA. See
|
|
|
|
|
<file:Documentation/mca.txt> (and especially the web page given
|
|
|
|
|
there) before attempting to build an MCA bus kernel.
|
|
|
|
|
|
|
|
|
|
source "drivers/mca/Kconfig"
|
|
|
|
|
|
|
|
|
|
config SCx200
|
|
|
|
|
tristate "NatSemi SCx200 support"
|
|
|
|
|
depends on !X86_VOYAGER
|
|
|
|
|
help
|
|
|
|
|
This provides basic support for National Semiconductor's
|
|
|
|
|
(now AMD's) Geode processors. The driver probes for the
|
|
|
|
|
PCI-IDs of several on-chip devices, so its a good dependency
|
|
|
|
|
for other scx200_* drivers.
|
|
|
|
|
|
|
|
|
|
If compiled as a module, the driver is named scx200.
|
|
|
|
|
|
|
|
|
|
config SCx200HR_TIMER
|
|
|
|
|
tristate "NatSemi SCx200 27MHz High-Resolution Timer Support"
|
|
|
|
|
depends on SCx200 && GENERIC_TIME
|
|
|
|
|
default y
|
|
|
|
|
help
|
|
|
|
|
This driver provides a clocksource built upon the on-chip
|
|
|
|
|
27MHz high-resolution timer. Its also a workaround for
|
|
|
|
|
NSC Geode SC-1100's buggy TSC, which loses time when the
|
|
|
|
|
processor goes idle (as is done by the scheduler). The
|
|
|
|
|
other workaround is idle=poll boot option.
|
|
|
|
|
|
|
|
|
|
config GEODE_MFGPT_TIMER
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
|
|
|
|
prompt "Geode Multi-Function General Purpose Timer (MFGPT) events"
|
2007-11-06 14:41:05 -05:00
|
|
|
depends on MGEODE_LX && GENERIC_TIME && GENERIC_CLOCKEVENTS
|
|
|
|
|
help
|
|
|
|
|
This driver provides a clock event source based on the MFGPT
|
|
|
|
|
timer(s) in the CS5535 and CS5536 companion chip for the geode.
|
|
|
|
|
MFGPTs have a better resolution and max interval than the
|
|
|
|
|
generic PIT, and are suitable for use as high-res timers.
|
|
|
|
|
|
2008-04-29 03:59:53 -04:00
|
|
|
config OLPC
|
|
|
|
|
bool "One Laptop Per Child support"
|
|
|
|
|
default n
|
|
|
|
|
help
|
|
|
|
|
Add support for detecting the unique features of the OLPC
|
|
|
|
|
XO hardware.
|
|
|
|
|
|
2007-11-06 17:10:39 -05:00
|
|
|
endif # X86_32
|
|
|
|
|
|
2007-11-06 14:41:05 -05:00
|
|
|
config K8_NB
|
|
|
|
|
def_bool y
|
2007-11-06 17:10:39 -05:00
|
|
|
depends on AGP_AMD64 || (X86_64 && (GART_IOMMU || (PCI && NUMA)))
|
2007-11-06 14:41:05 -05:00
|
|
|
|
|
|
|
|
source "drivers/pcmcia/Kconfig"
|
|
|
|
|
|
|
|
|
|
source "drivers/pci/hotplug/Kconfig"
|
|
|
|
|
|
|
|
|
|
endmenu
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
menu "Executable file formats / Emulations"
|
|
|
|
|
|
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
|
|
|
|
|
|
config IA32_EMULATION
|
|
|
|
|
bool "IA32 Emulation"
|
|
|
|
|
depends on X86_64
|
2008-01-30 07:31:55 -05:00
|
|
|
select COMPAT_BINFMT_ELF
|
2007-11-06 14:41:05 -05:00
|
|
|
help
|
|
|
|
|
Include code to run 32-bit programs under a 64-bit kernel. You should
|
|
|
|
|
likely turn this on, unless you're 100% sure that you don't have any
|
|
|
|
|
32-bit programs left.
|
|
|
|
|
|
|
|
|
|
config IA32_AOUT
|
|
|
|
|
tristate "IA32 a.out support"
|
2008-06-16 07:39:13 -04:00
|
|
|
depends on IA32_EMULATION
|
2007-11-06 14:41:05 -05:00
|
|
|
help
|
|
|
|
|
Support old a.out binaries in the 32bit emulation.
|
|
|
|
|
|
|
|
|
|
config COMPAT
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2007-11-06 14:41:05 -05:00
|
|
|
depends on IA32_EMULATION
|
|
|
|
|
|
|
|
|
|
config COMPAT_FOR_U64_ALIGNMENT
|
|
|
|
|
def_bool COMPAT
|
|
|
|
|
depends on X86_64
|
|
|
|
|
|
|
|
|
|
config SYSVIPC_COMPAT
|
2008-01-30 07:31:03 -05:00
|
|
|
def_bool y
|
2008-09-14 05:44:41 -04:00
|
|
|
depends on COMPAT && SYSVIPC
|
2007-11-06 14:41:05 -05:00
|
|
|
|
|
|
|
|
endmenu
|
|
|
|
|
|
|
|
|
|
|
2008-11-03 12:21:45 -05:00
|
|
|
config HAVE_ATOMIC_IOMAP
|
|
|
|
|
def_bool y
|
|
|
|
|
depends on X86_32
|
|
|
|
|
|
2007-11-06 14:41:05 -05:00
|
|
|
source "net/Kconfig"
|
|
|
|
|
|
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
|
|
|
|
|
|
source "drivers/firmware/Kconfig"
|
|
|
|
|
|
|
|
|
|
source "fs/Kconfig"
|
|
|
|
|
|
|
|
|
|
source "arch/x86/Kconfig.debug"
|
|
|
|
|
|
|
|
|
|
source "security/Kconfig"
|
|
|
|
|
|
|
|
|
|
source "crypto/Kconfig"
|
|
|
|
|
|
2007-12-16 04:02:48 -05:00
|
|
|
source "arch/x86/kvm/Kconfig"
|
|
|
|
|
|
2007-11-06 14:41:05 -05:00
|
|
|
source "lib/Kconfig"
|
