From 07415be140d039fd8a8096408b5aff49cc74e8f2 Mon Sep 17 00:00:00 2001 From: Ard Biesheuvel Date: Mon, 7 Aug 2023 18:26:58 +0200 Subject: [PATCH] x86/decompressor: Don't rely on upper 32 bits of GPRs being preserved MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 264b82fdb4989cf6a44a2bcd0c6ea05e8026b2ac ] The 4-to-5 level mode switch trampoline disables long mode and paging in order to be able to flick the LA57 bit. According to section 3.4.1.1 of the x86 architecture manual [0], 64-bit GPRs might not retain the upper 32 bits of their contents across such a mode switch. Given that RBP, RBX and RSI are live at this point, preserve them on the stack, along with the return address that might be above 4G as well. [0] Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 1: Basic Architecture "Because the upper 32 bits of 64-bit general-purpose registers are undefined in 32-bit modes, the upper 32 bits of any general-purpose register are not preserved when switching from 64-bit mode to a 32-bit mode (to protected mode or compatibility mode). Software must not depend on these bits to maintain a value after a 64-bit to 32-bit mode switch." Fixes: 194a9749c73d650c ("x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G") Signed-off-by: Ard Biesheuvel Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20230807162720.545787-2-ardb@kernel.org Signed-off-by: Sasha Levin --- arch/x86/boot/compressed/head_64.S | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-) diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 95ee795d9796..d8164e6abaaf 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -381,11 +381,25 @@ ENTRY(startup_64) /* Save the trampoline address in RCX */ movq %rax, %rcx + /* Set up 32-bit addressable stack */ + leaq TRAMPOLINE_32BIT_STACK_END(%rcx), %rsp + /* - * Load the address of trampoline_return() into RDI. - * It will be used by the trampoline to return to the main code. + * Preserve live 64-bit registers on the stack: this is necessary + * because the architecture does not guarantee that GPRs will retain + * their full 64-bit values across a 32-bit mode switch. + */ + pushq %rbp + pushq %rbx + pushq %rsi + + /* + * Push the 64-bit address of trampoline_return() onto the new stack. + * It will be used by the trampoline to return to the main code. Due to + * the 32-bit mode switch, it cannot be kept it in a register either. */ leaq trampoline_return(%rip), %rdi + pushq %rdi /* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */ pushq $__KERNEL32_CS @@ -393,6 +407,11 @@ ENTRY(startup_64) pushq %rax lretq trampoline_return: + /* Restore live 64-bit registers */ + popq %rsi + popq %rbx + popq %rbp + /* Restore the stack, the 32-bit trampoline uses its own stack */ leaq boot_stack_end(%rbx), %rsp @@ -573,7 +592,7 @@ SYM_FUNC_END(.Lrelocated) /* * This is the 32-bit trampoline that will be copied over to low memory. * - * RDI contains the return address (might be above 4G). + * Return address is at the top of the stack (might be above 4G). * ECX contains the base address of the trampoline memory. * Non zero RDX means trampoline needs to enable 5-level paging. */ @@ -583,9 +602,6 @@ ENTRY(trampoline_32bit_src) movl %eax, %ds movl %eax, %ss - /* Set up new stack */ - leal TRAMPOLINE_32BIT_STACK_END(%ecx), %esp - /* Disable paging */ movl %cr0, %eax btrl $X86_CR0_PG_BIT, %eax @@ -644,7 +660,7 @@ ENTRY(trampoline_32bit_src) .code64 SYM_FUNC_START_LOCAL_NOALIGN(.Lpaging_enabled) /* Return from the trampoline */ - jmp *%rdi + retq SYM_FUNC_END(.Lpaging_enabled) /*