bus: ti-sysc: Fix SYSC_QUIRK_SWSUP_SIDLE_ACT handling for uart wake-up

[ Upstream commit e5deb8f76e64d94ccef715e75ebafffd0c312d80 ]

The uarts should be tagged with SYSC_QUIRK_SWSUP_SIDLE instead of
SYSC_QUIRK_SWSUP_SIDLE_ACT. The difference is that SYSC_QUIRK_SWSUP_SIDLE
is used to force idle target modules rather than block idle during usage.

The SYSC_QUIRK_SWSUP_SIDLE_ACT should disable autoidle and wake-up when
a target module is active, and configure autoidle and wake-up when a
target module is inactive. We are missing configuring the target module
on sysc_disable_module(), and missing toggling of the wake-up bit.

Let's fix the issue to allow uart wake-up to work.

Fixes: fb685f1c19 ("bus: ti-sysc: Handle swsup idle mode quirks")
Tested-by: Dhruva Gole <d-gole@ti.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Tony Lindgren 2023-09-07 08:53:28 +03:00 committed by Greg Kroah-Hartman
parent 841733189b
commit 49dc6fcd4b

View File

@ -1023,6 +1023,11 @@ static int sysc_enable_module(struct device *dev)
if (ddata->cfg.quirks & (SYSC_QUIRK_SWSUP_SIDLE |
SYSC_QUIRK_SWSUP_SIDLE_ACT)) {
best_mode = SYSC_IDLE_NO;
/* Clear WAKEUP */
if (regbits->enwkup_shift >= 0 &&
ddata->cfg.sysc_val & BIT(regbits->enwkup_shift))
reg &= ~BIT(regbits->enwkup_shift);
} else {
best_mode = fls(ddata->cfg.sidlemodes) - 1;
if (best_mode > SYSC_IDLE_MASK) {
@ -1143,6 +1148,13 @@ set_sidle:
}
}
if (ddata->cfg.quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT) {
/* Set WAKEUP */
if (regbits->enwkup_shift >= 0 &&
ddata->cfg.sysc_val & BIT(regbits->enwkup_shift))
reg |= BIT(regbits->enwkup_shift);
}
reg &= ~(SYSC_IDLE_MASK << regbits->sidle_shift);
reg |= best_mode << regbits->sidle_shift;
if (regbits->autoidle_shift >= 0 &&
@ -1371,16 +1383,16 @@ static const struct sysc_revision_quirk sysc_revision_quirks[] = {
SYSC_QUIRK("timer", 0, 0, 0x10, -ENODEV, 0x4fff1301, 0xffff00ff,
0),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000046, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x00000052, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
/* Uarts on omap4 and later */
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x50411e03, 0xffff00ff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47422e03, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK("uart", 0, 0x50, 0x54, 0x58, 0x47424e03, 0xffffffff,
SYSC_QUIRK_SWSUP_SIDLE | SYSC_QUIRK_LEGACY_IDLE),
SYSC_QUIRK_SWSUP_SIDLE_ACT | SYSC_QUIRK_LEGACY_IDLE),
/* Quirks that need to be set based on the module address */
SYSC_QUIRK("mcpdm", 0x40132000, 0, 0x10, -ENODEV, 0x50000800, 0xffffffff,