diff --git a/drivers/media/IR/Kconfig b/drivers/media/IR/Kconfig index 152000db3526b..364514abb6f42 100644 --- a/drivers/media/IR/Kconfig +++ b/drivers/media/IR/Kconfig @@ -113,6 +113,19 @@ config IR_IMON To compile this driver as a module, choose M here: the module will be called imon. +config IR_NUVOTON + tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" + depends on PNP + depends on IR_CORE + ---help--- + Say Y here to enable support for integrated infrared receiver + /transciever made by Nuvoton (formerly Winbond). This chip is + found in the ASRock ION 330HT, as well as assorted Intel + DP55-series motherboards (and of course, possibly others). + + To compile this driver as a module, choose M here: the + module will be called nuvoton-cir. + config IR_MCEUSB tristate "Windows Media Center Ed. eHome Infrared Transceiver" depends on USB_ARCH_HAS_HCD diff --git a/drivers/media/IR/Makefile b/drivers/media/IR/Makefile index 953c6c44330ad..f9574adab82a5 100644 --- a/drivers/media/IR/Makefile +++ b/drivers/media/IR/Makefile @@ -17,5 +17,6 @@ obj-$(CONFIG_IR_LIRC_CODEC) += ir-lirc-codec.o # stand-alone IR receivers/transmitters obj-$(CONFIG_IR_IMON) += imon.o obj-$(CONFIG_IR_MCEUSB) += mceusb.o +obj-$(CONFIG_IR_NUVOTON) += nuvoton-cir.o obj-$(CONFIG_IR_ENE) += ene_ir.o obj-$(CONFIG_IR_STREAMZAP) += streamzap.o diff --git a/drivers/media/IR/nuvoton-cir.c b/drivers/media/IR/nuvoton-cir.c new file mode 100644 index 0000000000000..1ce93599ff569 --- /dev/null +++ b/drivers/media/IR/nuvoton-cir.c @@ -0,0 +1,1216 @@ +/* + * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR + * + * Copyright (C) 2010 Jarod Wilson + * Copyright (C) 2009 Nuvoton PS Team + * + * Special thanks to Nuvoton for providing hardware, spec sheets and + * sample code upon which portions of this driver are based. Indirect + * thanks also to Maxim Levitsky, whose ene_ir driver this driver is + * modeled after. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "nuvoton-cir.h" + +static char *chip_id = "w836x7hg"; + +/* write val to config reg */ +static inline void nvt_cr_write(struct nvt_dev *nvt, u8 val, u8 reg) +{ + outb(reg, nvt->cr_efir); + outb(val, nvt->cr_efdr); +} + +/* read val from config reg */ +static inline u8 nvt_cr_read(struct nvt_dev *nvt, u8 reg) +{ + outb(reg, nvt->cr_efir); + return inb(nvt->cr_efdr); +} + +/* update config register bit without changing other bits */ +static inline void nvt_set_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg) +{ + u8 tmp = nvt_cr_read(nvt, reg) | val; + nvt_cr_write(nvt, tmp, reg); +} + +/* clear config register bit without changing other bits */ +static inline void nvt_clear_reg_bit(struct nvt_dev *nvt, u8 val, u8 reg) +{ + u8 tmp = nvt_cr_read(nvt, reg) & ~val; + nvt_cr_write(nvt, tmp, reg); +} + +/* enter extended function mode */ +static inline void nvt_efm_enable(struct nvt_dev *nvt) +{ + /* Enabling Extended Function Mode explicitly requires writing 2x */ + outb(EFER_EFM_ENABLE, nvt->cr_efir); + outb(EFER_EFM_ENABLE, nvt->cr_efir); +} + +/* exit extended function mode */ +static inline void nvt_efm_disable(struct nvt_dev *nvt) +{ + outb(EFER_EFM_DISABLE, nvt->cr_efir); +} + +/* + * When you want to address a specific logical device, write its logical + * device number to CR_LOGICAL_DEV_SEL, then enable/disable by writing + * 0x1/0x0 respectively to CR_LOGICAL_DEV_EN. + */ +static inline void nvt_select_logical_dev(struct nvt_dev *nvt, u8 ldev) +{ + outb(CR_LOGICAL_DEV_SEL, nvt->cr_efir); + outb(ldev, nvt->cr_efdr); +} + +/* write val to cir config register */ +static inline void nvt_cir_reg_write(struct nvt_dev *nvt, u8 val, u8 offset) +{ + outb(val, nvt->cir_addr + offset); +} + +/* read val from cir config register */ +static u8 nvt_cir_reg_read(struct nvt_dev *nvt, u8 offset) +{ + u8 val; + + val = inb(nvt->cir_addr + offset); + + return val; +} + +/* write val to cir wake register */ +static inline void nvt_cir_wake_reg_write(struct nvt_dev *nvt, + u8 val, u8 offset) +{ + outb(val, nvt->cir_wake_addr + offset); +} + +/* read val from cir wake config register */ +static u8 nvt_cir_wake_reg_read(struct nvt_dev *nvt, u8 offset) +{ + u8 val; + + val = inb(nvt->cir_wake_addr + offset); + + return val; +} + +/* dump current cir register contents */ +static void cir_dump_regs(struct nvt_dev *nvt) +{ + nvt_efm_enable(nvt); + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + + printk("%s: Dump CIR logical device registers:\n", NVT_DRIVER_NAME); + printk(" * CR CIR ACTIVE : 0x%x\n", + nvt_cr_read(nvt, CR_LOGICAL_DEV_EN)); + printk(" * CR CIR BASE ADDR: 0x%x\n", + (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) | + nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO)); + printk(" * CR CIR IRQ NUM: 0x%x\n", + nvt_cr_read(nvt, CR_CIR_IRQ_RSRC)); + + nvt_efm_disable(nvt); + + printk("%s: Dump CIR registers:\n", NVT_DRIVER_NAME); + printk(" * IRCON: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRCON)); + printk(" * IRSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRSTS)); + printk(" * IREN: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IREN)); + printk(" * RXFCONT: 0x%x\n", nvt_cir_reg_read(nvt, CIR_RXFCONT)); + printk(" * CP: 0x%x\n", nvt_cir_reg_read(nvt, CIR_CP)); + printk(" * CC: 0x%x\n", nvt_cir_reg_read(nvt, CIR_CC)); + printk(" * SLCH: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCH)); + printk(" * SLCL: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SLCL)); + printk(" * FIFOCON: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FIFOCON)); + printk(" * IRFIFOSTS: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFIFOSTS)); + printk(" * SRXFIFO: 0x%x\n", nvt_cir_reg_read(nvt, CIR_SRXFIFO)); + printk(" * TXFCONT: 0x%x\n", nvt_cir_reg_read(nvt, CIR_TXFCONT)); + printk(" * STXFIFO: 0x%x\n", nvt_cir_reg_read(nvt, CIR_STXFIFO)); + printk(" * FCCH: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCH)); + printk(" * FCCL: 0x%x\n", nvt_cir_reg_read(nvt, CIR_FCCL)); + printk(" * IRFSM: 0x%x\n", nvt_cir_reg_read(nvt, CIR_IRFSM)); +} + +/* dump current cir wake register contents */ +static void cir_wake_dump_regs(struct nvt_dev *nvt) +{ + u8 i, fifo_len; + + nvt_efm_enable(nvt); + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE); + + printk("%s: Dump CIR WAKE logical device registers:\n", + NVT_DRIVER_NAME); + printk(" * CR CIR WAKE ACTIVE : 0x%x\n", + nvt_cr_read(nvt, CR_LOGICAL_DEV_EN)); + printk(" * CR CIR WAKE BASE ADDR: 0x%x\n", + (nvt_cr_read(nvt, CR_CIR_BASE_ADDR_HI) << 8) | + nvt_cr_read(nvt, CR_CIR_BASE_ADDR_LO)); + printk(" * CR CIR WAKE IRQ NUM: 0x%x\n", + nvt_cr_read(nvt, CR_CIR_IRQ_RSRC)); + + nvt_efm_disable(nvt); + + printk("%s: Dump CIR WAKE registers\n", NVT_DRIVER_NAME); + printk(" * IRCON: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRCON)); + printk(" * IRSTS: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS)); + printk(" * IREN: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN)); + printk(" * FIFO CMP DEEP: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_DEEP)); + printk(" * FIFO CMP TOL: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_CMP_TOL)); + printk(" * FIFO COUNT: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT)); + printk(" * SLCH: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCH)); + printk(" * SLCL: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_SLCL)); + printk(" * FIFOCON: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON)); + printk(" * SRXFSTS: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_SRXFSTS)); + printk(" * SAMPLE RX FIFO: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_SAMPLE_RX_FIFO)); + printk(" * WR FIFO DATA: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_WR_FIFO_DATA)); + printk(" * RD FIFO ONLY: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY)); + printk(" * RD FIFO ONLY IDX: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX)); + printk(" * FIFO IGNORE: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_IGNORE)); + printk(" * IRFSM: 0x%x\n", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRFSM)); + + fifo_len = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFO_COUNT); + printk("%s: Dump CIR WAKE FIFO (len %d)\n", NVT_DRIVER_NAME, fifo_len); + printk("* Contents = "); + for (i = 0; i < fifo_len; i++) + printk("%02x ", + nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY)); + printk("\n"); +} + +/* detect hardware features */ +static int nvt_hw_detect(struct nvt_dev *nvt) +{ + unsigned long flags; + u8 chip_major, chip_minor; + int ret = 0; + + nvt_efm_enable(nvt); + + /* Check if we're wired for the alternate EFER setup */ + chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI); + if (chip_major == 0xff) { + nvt->cr_efir = CR_EFIR2; + nvt->cr_efdr = CR_EFDR2; + nvt_efm_enable(nvt); + chip_major = nvt_cr_read(nvt, CR_CHIP_ID_HI); + } + + chip_minor = nvt_cr_read(nvt, CR_CHIP_ID_LO); + nvt_dbg("%s: chip id: 0x%02x 0x%02x", chip_id, chip_major, chip_minor); + + if (chip_major != CHIP_ID_HIGH && + (chip_minor != CHIP_ID_LOW || chip_minor != CHIP_ID_LOW2)) + ret = -ENODEV; + + nvt_efm_disable(nvt); + + spin_lock_irqsave(&nvt->nvt_lock, flags); + nvt->chip_major = chip_major; + nvt->chip_minor = chip_minor; + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + + return ret; +} + +static void nvt_cir_ldev_init(struct nvt_dev *nvt) +{ + u8 val; + + /* output pin selection (Pin95=CIRRX, Pin96=CIRTX1, WB enabled */ + val = nvt_cr_read(nvt, CR_OUTPUT_PIN_SEL); + val &= OUTPUT_PIN_SEL_MASK; + val |= (OUTPUT_ENABLE_CIR | OUTPUT_ENABLE_CIRWB); + nvt_cr_write(nvt, val, CR_OUTPUT_PIN_SEL); + + /* Select CIR logical device and enable */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + nvt_cr_write(nvt, nvt->cir_addr >> 8, CR_CIR_BASE_ADDR_HI); + nvt_cr_write(nvt, nvt->cir_addr & 0xff, CR_CIR_BASE_ADDR_LO); + + nvt_cr_write(nvt, nvt->cir_irq, CR_CIR_IRQ_RSRC); + + nvt_dbg("CIR initialized, base io port address: 0x%lx, irq: %d", + nvt->cir_addr, nvt->cir_irq); +} + +static void nvt_cir_wake_ldev_init(struct nvt_dev *nvt) +{ + /* Select ACPI logical device, enable it and CIR Wake */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + /* Enable CIR Wake via PSOUT# (Pin60) */ + nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE); + + /* enable cir interrupt of mouse/keyboard IRQ event */ + nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS); + + /* enable pme interrupt of cir wakeup event */ + nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2); + + /* Select CIR Wake logical device and enable */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + nvt_cr_write(nvt, nvt->cir_wake_addr >> 8, CR_CIR_BASE_ADDR_HI); + nvt_cr_write(nvt, nvt->cir_wake_addr & 0xff, CR_CIR_BASE_ADDR_LO); + + nvt_cr_write(nvt, nvt->cir_wake_irq, CR_CIR_IRQ_RSRC); + + nvt_dbg("CIR Wake initialized, base io port address: 0x%lx, irq: %d", + nvt->cir_wake_addr, nvt->cir_wake_irq); +} + +/* clear out the hardware's cir rx fifo */ +static void nvt_clear_cir_fifo(struct nvt_dev *nvt) +{ + u8 val; + + val = nvt_cir_reg_read(nvt, CIR_FIFOCON); + nvt_cir_reg_write(nvt, val | CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON); +} + +/* clear out the hardware's cir wake rx fifo */ +static void nvt_clear_cir_wake_fifo(struct nvt_dev *nvt) +{ + u8 val; + + val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_FIFOCON); + nvt_cir_wake_reg_write(nvt, val | CIR_WAKE_FIFOCON_RXFIFOCLR, + CIR_WAKE_FIFOCON); +} + +/* clear out the hardware's cir tx fifo */ +static void nvt_clear_tx_fifo(struct nvt_dev *nvt) +{ + u8 val; + + val = nvt_cir_reg_read(nvt, CIR_FIFOCON); + nvt_cir_reg_write(nvt, val | CIR_FIFOCON_TXFIFOCLR, CIR_FIFOCON); +} + +static void nvt_cir_regs_init(struct nvt_dev *nvt) +{ + /* set sample limit count (PE interrupt raised when reached) */ + nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_SLCH); + nvt_cir_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_SLCL); + + /* set fifo irq trigger levels */ + nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV | + CIR_FIFOCON_RX_TRIGGER_LEV, CIR_FIFOCON); + + /* + * Enable TX and RX, specify carrier on = low, off = high, and set + * sample period (currently 50us) + */ + nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN | CIR_IRCON_RXINV | + CIR_IRCON_SAMPLE_PERIOD_SEL, CIR_IRCON); + + /* clear hardware rx and tx fifos */ + nvt_clear_cir_fifo(nvt); + nvt_clear_tx_fifo(nvt); + + /* clear any and all stray interrupts */ + nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS); + + /* and finally, enable RX Trigger Level Read and Packet End interrupts */ + nvt_cir_reg_write(nvt, CIR_IREN_RTR | CIR_IREN_PE, CIR_IREN); +} + +static void nvt_cir_wake_regs_init(struct nvt_dev *nvt) +{ + /* set number of bytes needed for wake key comparison (default 67) */ + nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFO_LEN, CIR_WAKE_FIFO_CMP_DEEP); + + /* set tolerance/variance allowed per byte during wake compare */ + nvt_cir_wake_reg_write(nvt, CIR_WAKE_CMP_TOLERANCE, + CIR_WAKE_FIFO_CMP_TOL); + + /* set sample limit count (PE interrupt raised when reached) */ + nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT >> 8, CIR_WAKE_SLCH); + nvt_cir_wake_reg_write(nvt, CIR_RX_LIMIT_COUNT & 0xff, CIR_WAKE_SLCL); + + /* set cir wake fifo rx trigger level (currently 67) */ + nvt_cir_wake_reg_write(nvt, CIR_WAKE_FIFOCON_RX_TRIGGER_LEV, + CIR_WAKE_FIFOCON); + + /* + * Enable TX and RX, specific carrier on = low, off = high, and set + * sample period (currently 50us) + */ + nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN | + CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV | + CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL, + CIR_WAKE_IRCON); + + /* clear cir wake rx fifo */ + nvt_clear_cir_wake_fifo(nvt); + + /* clear any and all stray interrupts */ + nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS); +} + +static void nvt_enable_wake(struct nvt_dev *nvt) +{ + nvt_efm_enable(nvt); + + nvt_select_logical_dev(nvt, LOGICAL_DEV_ACPI); + nvt_set_reg_bit(nvt, CIR_WAKE_ENABLE_BIT, CR_ACPI_CIR_WAKE); + nvt_set_reg_bit(nvt, CIR_INTR_MOUSE_IRQ_BIT, CR_ACPI_IRQ_EVENTS); + nvt_set_reg_bit(nvt, PME_INTR_CIR_PASS_BIT, CR_ACPI_IRQ_EVENTS2); + + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR_WAKE); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + nvt_efm_disable(nvt); + + nvt_cir_wake_reg_write(nvt, CIR_WAKE_IRCON_MODE0 | CIR_WAKE_IRCON_RXEN | + CIR_WAKE_IRCON_R | CIR_WAKE_IRCON_RXINV | + CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL, CIR_WAKE_IRCON); + nvt_cir_wake_reg_write(nvt, 0xff, CIR_WAKE_IRSTS); + nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN); +} + +/* rx carrier detect only works in learning mode, must be called w/nvt_lock */ +static u32 nvt_rx_carrier_detect(struct nvt_dev *nvt) +{ + u32 count, carrier, duration = 0; + int i; + + count = nvt_cir_reg_read(nvt, CIR_FCCL) | + nvt_cir_reg_read(nvt, CIR_FCCH) << 8; + + for (i = 0; i < nvt->pkts; i++) { + if (nvt->buf[i] & BUF_PULSE_BIT) + duration += nvt->buf[i] & BUF_LEN_MASK; + } + + duration *= SAMPLE_PERIOD; + + if (!count || !duration) { + nvt_pr(KERN_NOTICE, "Unable to determine carrier! (c:%u, d:%u)", + count, duration); + return 0; + } + + carrier = (count * 1000000) / duration; + + if ((carrier > MAX_CARRIER) || (carrier < MIN_CARRIER)) + nvt_dbg("WTF? Carrier frequency out of range!"); + + nvt_dbg("Carrier frequency: %u (count %u, duration %u)", + carrier, count, duration); + + return carrier; +} + +/* + * set carrier frequency + * + * set carrier on 2 registers: CP & CC + * always set CP as 0x81 + * set CC by SPEC, CC = 3MHz/carrier - 1 + */ +static int nvt_set_tx_carrier(void *data, u32 carrier) +{ + struct nvt_dev *nvt = data; + u16 val; + + nvt_cir_reg_write(nvt, 1, CIR_CP); + val = 3000000 / (carrier) - 1; + nvt_cir_reg_write(nvt, val & 0xff, CIR_CC); + + nvt_dbg("cp: 0x%x cc: 0x%x\n", + nvt_cir_reg_read(nvt, CIR_CP), nvt_cir_reg_read(nvt, CIR_CC)); + + return 0; +} + +/* + * nvt_tx_ir + * + * 1) clean TX fifo first (handled by AP) + * 2) copy data from user space + * 3) disable RX interrupts, enable TX interrupts: TTR & TFU + * 4) send 9 packets to TX FIFO to open TTR + * in interrupt_handler: + * 5) send all data out + * go back to write(): + * 6) disable TX interrupts, re-enable RX interupts + * + * The key problem of this function is user space data may larger than + * driver's data buf length. So nvt_tx_ir() will only copy TX_BUF_LEN data to + * buf, and keep current copied data buf num in cur_buf_num. But driver's buf + * number may larger than TXFCONT (0xff). So in interrupt_handler, it has to + * set TXFCONT as 0xff, until buf_count less than 0xff. + */ +static int nvt_tx_ir(void *priv, int *txbuf, u32 n) +{ + struct nvt_dev *nvt = priv; + unsigned long flags; + size_t cur_count; + unsigned int i; + u8 iren; + int ret; + + spin_lock_irqsave(&nvt->tx.lock, flags); + + if (n >= TX_BUF_LEN) { + nvt->tx.buf_count = cur_count = TX_BUF_LEN; + ret = TX_BUF_LEN; + } else { + nvt->tx.buf_count = cur_count = n; + ret = n; + } + + memcpy(nvt->tx.buf, txbuf, nvt->tx.buf_count); + + nvt->tx.cur_buf_num = 0; + + /* save currently enabled interrupts */ + iren = nvt_cir_reg_read(nvt, CIR_IREN); + + /* now disable all interrupts, save TFU & TTR */ + nvt_cir_reg_write(nvt, CIR_IREN_TFU | CIR_IREN_TTR, CIR_IREN); + + nvt->tx.tx_state = ST_TX_REPLY; + + nvt_cir_reg_write(nvt, CIR_FIFOCON_TX_TRIGGER_LEV_8 | + CIR_FIFOCON_RXFIFOCLR, CIR_FIFOCON); + + /* trigger TTR interrupt by writing out ones, (yes, it's ugly) */ + for (i = 0; i < 9; i++) + nvt_cir_reg_write(nvt, 0x01, CIR_STXFIFO); + + spin_unlock_irqrestore(&nvt->tx.lock, flags); + + wait_event(nvt->tx.queue, nvt->tx.tx_state == ST_TX_REQUEST); + + spin_lock_irqsave(&nvt->tx.lock, flags); + nvt->tx.tx_state = ST_TX_NONE; + spin_unlock_irqrestore(&nvt->tx.lock, flags); + + /* restore enabled interrupts to prior state */ + nvt_cir_reg_write(nvt, iren, CIR_IREN); + + return ret; +} + +/* dump contents of the last rx buffer we got from the hw rx fifo */ +static void nvt_dump_rx_buf(struct nvt_dev *nvt) +{ + int i; + + printk("%s (len %d): ", __func__, nvt->pkts); + for (i = 0; (i < nvt->pkts) && (i < RX_BUF_LEN); i++) + printk("0x%02x ", nvt->buf[i]); + printk("\n"); +} + +/* + * Process raw data in rx driver buffer, store it in raw IR event kfifo, + * trigger decode when appropriate. + * + * We get IR data samples one byte at a time. If the msb is set, its a pulse, + * otherwise its a space. The lower 7 bits are the count of SAMPLE_PERIOD + * (default 50us) intervals for that pulse/space. A discrete signal is + * followed by a series of 0x7f packets, then either 0x7 or 0x80 + * to signal more IR coming (repeats) or end of IR, respectively. We store + * sample data in the raw event kfifo until we see 0x7 (except f) + * or 0x80, at which time, we trigger a decode operation. + */ +static void nvt_process_rx_ir_data(struct nvt_dev *nvt) +{ + struct ir_raw_event rawir = { .pulse = false, .duration = 0 }; + unsigned int count; + u32 carrier; + u8 sample; + int i; + + nvt_dbg_verbose("%s firing", __func__); + + if (debug) + nvt_dump_rx_buf(nvt); + + if (nvt->carrier_detect_enabled) + carrier = nvt_rx_carrier_detect(nvt); + + count = nvt->pkts; + nvt_dbg_verbose("Processing buffer of len %d", count); + + for (i = 0; i < count; i++) { + nvt->pkts--; + sample = nvt->buf[i]; + + rawir.pulse = ((sample & BUF_PULSE_BIT) != 0); + rawir.duration = (sample & BUF_LEN_MASK) + * SAMPLE_PERIOD * 1000; + + if ((sample & BUF_LEN_MASK) == BUF_LEN_MASK) { + if (nvt->rawir.pulse == rawir.pulse) + nvt->rawir.duration += rawir.duration; + else { + nvt->rawir.duration = rawir.duration; + nvt->rawir.pulse = rawir.pulse; + } + continue; + } + + rawir.duration += nvt->rawir.duration; + nvt->rawir.duration = 0; + nvt->rawir.pulse = rawir.pulse; + + if (sample == BUF_PULSE_BIT) + rawir.pulse = false; + + if (rawir.duration) { + nvt_dbg("Storing %s with duration %d", + rawir.pulse ? "pulse" : "space", + rawir.duration); + + ir_raw_event_store(nvt->rdev, &rawir); + } + + /* + * BUF_PULSE_BIT indicates end of IR data, BUF_REPEAT_BYTE + * indicates end of IR signal, but new data incoming. In both + * cases, it means we're ready to call ir_raw_event_handle + */ + if (sample == BUF_PULSE_BIT || ((sample != BUF_LEN_MASK) && + (sample & BUF_REPEAT_MASK) == BUF_REPEAT_BYTE)) + ir_raw_event_handle(nvt->rdev); + } + + if (nvt->pkts) { + nvt_dbg("Odd, pkts should be 0 now... (its %u)", nvt->pkts); + nvt->pkts = 0; + } + + nvt_dbg_verbose("%s done", __func__); +} + +/* copy data from hardware rx fifo into driver buffer */ +static void nvt_get_rx_ir_data(struct nvt_dev *nvt) +{ + unsigned long flags; + u8 fifocount, val; + unsigned int b_idx; + int i; + + /* Get count of how many bytes to read from RX FIFO */ + fifocount = nvt_cir_reg_read(nvt, CIR_RXFCONT); + /* if we get 0xff, probably means the logical dev is disabled */ + if (fifocount == 0xff) + return; + /* this would suggest a fifo overrun, not good... */ + else if (fifocount > RX_BUF_LEN) { + nvt_pr(KERN_WARNING, "fifocount %d over fifo len (%d)!", + fifocount, RX_BUF_LEN); + return; + } + + nvt_dbg("attempting to fetch %u bytes from hw rx fifo", fifocount); + + spin_lock_irqsave(&nvt->nvt_lock, flags); + + b_idx = nvt->pkts; + + /* This should never happen, but lets check anyway... */ + if (b_idx + fifocount > RX_BUF_LEN) { + nvt_process_rx_ir_data(nvt); + b_idx = 0; + } + + /* Read fifocount bytes from CIR Sample RX FIFO register */ + for (i = 0; i < fifocount; i++) { + val = nvt_cir_reg_read(nvt, CIR_SRXFIFO); + nvt->buf[b_idx + i] = val; + } + + nvt->pkts += fifocount; + nvt_dbg("%s: pkts now %d", __func__, nvt->pkts); + + nvt_process_rx_ir_data(nvt); + + spin_unlock_irqrestore(&nvt->nvt_lock, flags); +} + +static void nvt_cir_log_irqs(u8 status, u8 iren) +{ + nvt_pr(KERN_INFO, "IRQ 0x%02x (IREN 0x%02x) :%s%s%s%s%s%s%s%s%s", + status, iren, + status & CIR_IRSTS_RDR ? " RDR" : "", + status & CIR_IRSTS_RTR ? " RTR" : "", + status & CIR_IRSTS_PE ? " PE" : "", + status & CIR_IRSTS_RFO ? " RFO" : "", + status & CIR_IRSTS_TE ? " TE" : "", + status & CIR_IRSTS_TTR ? " TTR" : "", + status & CIR_IRSTS_TFU ? " TFU" : "", + status & CIR_IRSTS_GH ? " GH" : "", + status & ~(CIR_IRSTS_RDR | CIR_IRSTS_RTR | CIR_IRSTS_PE | + CIR_IRSTS_RFO | CIR_IRSTS_TE | CIR_IRSTS_TTR | + CIR_IRSTS_TFU | CIR_IRSTS_GH) ? " ?" : ""); +} + +static bool nvt_cir_tx_inactive(struct nvt_dev *nvt) +{ + unsigned long flags; + bool tx_inactive; + u8 tx_state; + + spin_lock_irqsave(&nvt->tx.lock, flags); + tx_state = nvt->tx.tx_state; + spin_unlock_irqrestore(&nvt->tx.lock, flags); + + tx_inactive = (tx_state == ST_TX_NONE); + + return tx_inactive; +} + +/* interrupt service routine for incoming and outgoing CIR data */ +static irqreturn_t nvt_cir_isr(int irq, void *data) +{ + struct nvt_dev *nvt = data; + u8 status, iren, cur_state; + unsigned long flags; + + nvt_dbg_verbose("%s firing", __func__); + + nvt_efm_enable(nvt); + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_efm_disable(nvt); + + /* + * Get IR Status register contents. Write 1 to ack/clear + * + * bit: reg name - description + * 7: CIR_IRSTS_RDR - RX Data Ready + * 6: CIR_IRSTS_RTR - RX FIFO Trigger Level Reach + * 5: CIR_IRSTS_PE - Packet End + * 4: CIR_IRSTS_RFO - RX FIFO Overrun (RDR will also be set) + * 3: CIR_IRSTS_TE - TX FIFO Empty + * 2: CIR_IRSTS_TTR - TX FIFO Trigger Level Reach + * 1: CIR_IRSTS_TFU - TX FIFO Underrun + * 0: CIR_IRSTS_GH - Min Length Detected + */ + status = nvt_cir_reg_read(nvt, CIR_IRSTS); + if (!status) { + nvt_dbg_verbose("%s exiting, IRSTS 0x0", __func__); + nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS); + return IRQ_RETVAL(IRQ_NONE); + } + + /* ack/clear all irq flags we've got */ + nvt_cir_reg_write(nvt, status, CIR_IRSTS); + nvt_cir_reg_write(nvt, 0, CIR_IRSTS); + + /* Interrupt may be shared with CIR Wake, bail if CIR not enabled */ + iren = nvt_cir_reg_read(nvt, CIR_IREN); + if (!iren) { + nvt_dbg_verbose("%s exiting, CIR not enabled", __func__); + return IRQ_RETVAL(IRQ_NONE); + } + + if (debug) + nvt_cir_log_irqs(status, iren); + + if (status & CIR_IRSTS_RTR) { + /* FIXME: add code for study/learn mode */ + /* We only do rx if not tx'ing */ + if (nvt_cir_tx_inactive(nvt)) + nvt_get_rx_ir_data(nvt); + } + + if (status & CIR_IRSTS_PE) { + if (nvt_cir_tx_inactive(nvt)) + nvt_get_rx_ir_data(nvt); + + spin_lock_irqsave(&nvt->nvt_lock, flags); + + cur_state = nvt->study_state; + + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + + if (cur_state == ST_STUDY_NONE) + nvt_clear_cir_fifo(nvt); + } + + if (status & CIR_IRSTS_TE) + nvt_clear_tx_fifo(nvt); + + if (status & CIR_IRSTS_TTR) { + unsigned int pos, count; + u8 tmp; + + spin_lock_irqsave(&nvt->tx.lock, flags); + + pos = nvt->tx.cur_buf_num; + count = nvt->tx.buf_count; + + /* Write data into the hardware tx fifo while pos < count */ + if (pos < count) { + nvt_cir_reg_write(nvt, nvt->tx.buf[pos], CIR_STXFIFO); + nvt->tx.cur_buf_num++; + /* Disable TX FIFO Trigger Level Reach (TTR) interrupt */ + } else { + tmp = nvt_cir_reg_read(nvt, CIR_IREN); + nvt_cir_reg_write(nvt, tmp & ~CIR_IREN_TTR, CIR_IREN); + } + + spin_unlock_irqrestore(&nvt->tx.lock, flags); + + } + + if (status & CIR_IRSTS_TFU) { + spin_lock_irqsave(&nvt->tx.lock, flags); + if (nvt->tx.tx_state == ST_TX_REPLY) { + nvt->tx.tx_state = ST_TX_REQUEST; + wake_up(&nvt->tx.queue); + } + spin_unlock_irqrestore(&nvt->tx.lock, flags); + } + + nvt_dbg_verbose("%s done", __func__); + return IRQ_RETVAL(IRQ_HANDLED); +} + +/* Interrupt service routine for CIR Wake */ +static irqreturn_t nvt_cir_wake_isr(int irq, void *data) +{ + u8 status, iren, val; + struct nvt_dev *nvt = data; + unsigned long flags; + + nvt_dbg_wake("%s firing", __func__); + + status = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IRSTS); + if (!status) + return IRQ_RETVAL(IRQ_NONE); + + if (status & CIR_WAKE_IRSTS_IR_PENDING) + nvt_clear_cir_wake_fifo(nvt); + + nvt_cir_wake_reg_write(nvt, status, CIR_WAKE_IRSTS); + nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IRSTS); + + /* Interrupt may be shared with CIR, bail if Wake not enabled */ + iren = nvt_cir_wake_reg_read(nvt, CIR_WAKE_IREN); + if (!iren) { + nvt_dbg_wake("%s exiting, wake not enabled", __func__); + return IRQ_RETVAL(IRQ_HANDLED); + } + + if ((status & CIR_WAKE_IRSTS_PE) && + (nvt->wake_state == ST_WAKE_START)) { + while (nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY_IDX)) { + val = nvt_cir_wake_reg_read(nvt, CIR_WAKE_RD_FIFO_ONLY); + nvt_dbg("setting wake up key: 0x%x", val); + } + + nvt_cir_wake_reg_write(nvt, 0, CIR_WAKE_IREN); + spin_lock_irqsave(&nvt->nvt_lock, flags); + nvt->wake_state = ST_WAKE_FINISH; + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + } + + nvt_dbg_wake("%s done", __func__); + return IRQ_RETVAL(IRQ_HANDLED); +} + +static void nvt_enable_cir(struct nvt_dev *nvt) +{ + /* set function enable flags */ + nvt_cir_reg_write(nvt, CIR_IRCON_TXEN | CIR_IRCON_RXEN | + CIR_IRCON_RXINV | CIR_IRCON_SAMPLE_PERIOD_SEL, + CIR_IRCON); + + nvt_efm_enable(nvt); + + /* enable the CIR logical device */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + nvt_efm_disable(nvt); + + /* clear all pending interrupts */ + nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS); + + /* enable interrupts */ + nvt_cir_reg_write(nvt, CIR_IREN_RTR | CIR_IREN_PE, CIR_IREN); +} + +static void nvt_disable_cir(struct nvt_dev *nvt) +{ + /* disable CIR interrupts */ + nvt_cir_reg_write(nvt, 0, CIR_IREN); + + /* clear any and all pending interrupts */ + nvt_cir_reg_write(nvt, 0xff, CIR_IRSTS); + + /* clear all function enable flags */ + nvt_cir_reg_write(nvt, 0, CIR_IRCON); + + /* clear hardware rx and tx fifos */ + nvt_clear_cir_fifo(nvt); + nvt_clear_tx_fifo(nvt); + + nvt_efm_enable(nvt); + + /* disable the CIR logical device */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN); + + nvt_efm_disable(nvt); +} + +static int nvt_open(void *data) +{ + struct nvt_dev *nvt = (struct nvt_dev *)data; + unsigned long flags; + + spin_lock_irqsave(&nvt->nvt_lock, flags); + nvt->in_use = true; + nvt_enable_cir(nvt); + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + + return 0; +} + +static void nvt_close(void *data) +{ + struct nvt_dev *nvt = (struct nvt_dev *)data; + unsigned long flags; + + spin_lock_irqsave(&nvt->nvt_lock, flags); + nvt->in_use = false; + nvt_disable_cir(nvt); + spin_unlock_irqrestore(&nvt->nvt_lock, flags); +} + +/* Allocate memory, probe hardware, and initialize everything */ +static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id) +{ + struct nvt_dev *nvt = NULL; + struct input_dev *rdev = NULL; + struct ir_dev_props *props = NULL; + int ret = -ENOMEM; + + nvt = kzalloc(sizeof(struct nvt_dev), GFP_KERNEL); + if (!nvt) + return ret; + + props = kzalloc(sizeof(struct ir_dev_props), GFP_KERNEL); + if (!props) + goto failure; + + /* input device for IR remote (and tx) */ + rdev = input_allocate_device(); + if (!rdev) + goto failure; + + ret = -ENODEV; + /* validate pnp resources */ + if (!pnp_port_valid(pdev, 0) || + pnp_port_len(pdev, 0) < CIR_IOREG_LENGTH) { + dev_err(&pdev->dev, "IR PNP Port not valid!\n"); + goto failure; + } + + if (!pnp_irq_valid(pdev, 0)) { + dev_err(&pdev->dev, "PNP IRQ not valid!\n"); + goto failure; + } + + if (!pnp_port_valid(pdev, 1) || + pnp_port_len(pdev, 1) < CIR_IOREG_LENGTH) { + dev_err(&pdev->dev, "Wake PNP Port not valid!\n"); + goto failure; + } + + nvt->cir_addr = pnp_port_start(pdev, 0); + nvt->cir_irq = pnp_irq(pdev, 0); + + nvt->cir_wake_addr = pnp_port_start(pdev, 1); + /* irq is always shared between cir and cir wake */ + nvt->cir_wake_irq = nvt->cir_irq; + + nvt->cr_efir = CR_EFIR; + nvt->cr_efdr = CR_EFDR; + + spin_lock_init(&nvt->nvt_lock); + spin_lock_init(&nvt->tx.lock); + + ret = -EBUSY; + /* now claim resources */ + if (!request_region(nvt->cir_addr, + CIR_IOREG_LENGTH, NVT_DRIVER_NAME)) + goto failure; + + if (request_irq(nvt->cir_irq, nvt_cir_isr, IRQF_SHARED, + NVT_DRIVER_NAME, (void *)nvt)) + goto failure; + + if (!request_region(nvt->cir_wake_addr, + CIR_IOREG_LENGTH, NVT_DRIVER_NAME)) + goto failure; + + if (request_irq(nvt->cir_wake_irq, nvt_cir_wake_isr, IRQF_SHARED, + NVT_DRIVER_NAME, (void *)nvt)) + goto failure; + + pnp_set_drvdata(pdev, nvt); + nvt->pdev = pdev; + + init_waitqueue_head(&nvt->tx.queue); + + ret = nvt_hw_detect(nvt); + if (ret) + goto failure; + + /* Initialize CIR & CIR Wake Logical Devices */ + nvt_efm_enable(nvt); + nvt_cir_ldev_init(nvt); + nvt_cir_wake_ldev_init(nvt); + nvt_efm_disable(nvt); + + /* Initialize CIR & CIR Wake Config Registers */ + nvt_cir_regs_init(nvt); + nvt_cir_wake_regs_init(nvt); + + /* Set up ir-core props */ + props->priv = nvt; + props->driver_type = RC_DRIVER_IR_RAW; + props->allowed_protos = IR_TYPE_ALL; + props->open = nvt_open; + props->close = nvt_close; +#if 0 + props->min_timeout = XYZ; + props->max_timeout = XYZ; + props->timeout = XYZ; + /* rx resolution is hardwired to 50us atm, 1, 25, 100 also possible */ + props->rx_resolution = XYZ; + + /* tx bits */ + props->tx_resolution = XYZ; +#endif + props->tx_ir = nvt_tx_ir; + props->s_tx_carrier = nvt_set_tx_carrier; + + rdev->name = "Nuvoton w836x7hg Infrared Remote Transceiver"; + rdev->id.bustype = BUS_HOST; + rdev->id.vendor = PCI_VENDOR_ID_WINBOND2; + rdev->id.product = nvt->chip_major; + rdev->id.version = nvt->chip_minor; + + nvt->props = props; + nvt->rdev = rdev; + + device_set_wakeup_capable(&pdev->dev, 1); + device_set_wakeup_enable(&pdev->dev, 1); + + ret = ir_input_register(rdev, RC_MAP_RC6_MCE, props, NVT_DRIVER_NAME); + if (ret) + goto failure; + + nvt_pr(KERN_NOTICE, "driver has been successfully loaded\n"); + if (debug) { + cir_dump_regs(nvt); + cir_wake_dump_regs(nvt); + } + + return 0; + +failure: + if (nvt->cir_irq) + free_irq(nvt->cir_irq, nvt); + if (nvt->cir_addr) + release_region(nvt->cir_addr, CIR_IOREG_LENGTH); + + if (nvt->cir_wake_irq) + free_irq(nvt->cir_wake_irq, nvt); + if (nvt->cir_wake_addr) + release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH); + + input_free_device(rdev); + kfree(props); + kfree(nvt); + + return ret; +} + +static void __devexit nvt_remove(struct pnp_dev *pdev) +{ + struct nvt_dev *nvt = pnp_get_drvdata(pdev); + unsigned long flags; + + spin_lock_irqsave(&nvt->nvt_lock, flags); + /* disable CIR */ + nvt_cir_reg_write(nvt, 0, CIR_IREN); + nvt_disable_cir(nvt); + /* enable CIR Wake (for IR power-on) */ + nvt_enable_wake(nvt); + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + + /* free resources */ + free_irq(nvt->cir_irq, nvt); + free_irq(nvt->cir_wake_irq, nvt); + release_region(nvt->cir_addr, CIR_IOREG_LENGTH); + release_region(nvt->cir_wake_addr, CIR_IOREG_LENGTH); + + ir_input_unregister(nvt->rdev); + + kfree(nvt->props); + kfree(nvt); +} + +static int nvt_suspend(struct pnp_dev *pdev, pm_message_t state) +{ + struct nvt_dev *nvt = pnp_get_drvdata(pdev); + unsigned long flags; + + nvt_dbg("%s called", __func__); + + /* zero out misc state tracking */ + spin_lock_irqsave(&nvt->nvt_lock, flags); + nvt->study_state = ST_STUDY_NONE; + nvt->wake_state = ST_WAKE_NONE; + spin_unlock_irqrestore(&nvt->nvt_lock, flags); + + spin_lock_irqsave(&nvt->tx.lock, flags); + nvt->tx.tx_state = ST_TX_NONE; + spin_unlock_irqrestore(&nvt->tx.lock, flags); + + /* disable all CIR interrupts */ + nvt_cir_reg_write(nvt, 0, CIR_IREN); + + nvt_efm_enable(nvt); + + /* disable cir logical dev */ + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_cr_write(nvt, LOGICAL_DEV_DISABLE, CR_LOGICAL_DEV_EN); + + nvt_efm_disable(nvt); + + /* make sure wake is enabled */ + nvt_enable_wake(nvt); + + return 0; +} + +static int nvt_resume(struct pnp_dev *pdev) +{ + int ret = 0; + struct nvt_dev *nvt = pnp_get_drvdata(pdev); + + nvt_dbg("%s called", __func__); + + /* open interrupt */ + nvt_cir_reg_write(nvt, CIR_IREN_RTR | CIR_IREN_PE, CIR_IREN); + + /* Enable CIR logical device */ + nvt_efm_enable(nvt); + nvt_select_logical_dev(nvt, LOGICAL_DEV_CIR); + nvt_cr_write(nvt, LOGICAL_DEV_ENABLE, CR_LOGICAL_DEV_EN); + + nvt_efm_disable(nvt); + + nvt_cir_regs_init(nvt); + nvt_cir_wake_regs_init(nvt); + + return ret; +} + +static void nvt_shutdown(struct pnp_dev *pdev) +{ + struct nvt_dev *nvt = pnp_get_drvdata(pdev); + nvt_enable_wake(nvt); +} + +static const struct pnp_device_id nvt_ids[] = { + { "WEC0530", 0 }, /* CIR */ + { "NTN0530", 0 }, /* CIR for new chip's pnp id*/ + { "", 0 }, +}; + +static struct pnp_driver nvt_driver = { + .name = NVT_DRIVER_NAME, + .id_table = nvt_ids, + .flags = PNP_DRIVER_RES_DO_NOT_CHANGE, + .probe = nvt_probe, + .remove = __devexit_p(nvt_remove), + .suspend = nvt_suspend, + .resume = nvt_resume, + .shutdown = nvt_shutdown, +}; + +int nvt_init(void) +{ + return pnp_register_driver(&nvt_driver); +} + +void nvt_exit(void) +{ + pnp_unregister_driver(&nvt_driver); +} + +module_param(debug, int, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable debugging output"); + +MODULE_DEVICE_TABLE(pnp, nvt_ids); +MODULE_DESCRIPTION("Nuvoton W83667HG-A & W83677HG-I CIR driver"); + +MODULE_AUTHOR("Jarod Wilson "); +MODULE_LICENSE("GPL"); + +module_init(nvt_init); +module_exit(nvt_exit); diff --git a/drivers/media/IR/nuvoton-cir.h b/drivers/media/IR/nuvoton-cir.h new file mode 100644 index 0000000000000..12bfe899fd1a6 --- /dev/null +++ b/drivers/media/IR/nuvoton-cir.h @@ -0,0 +1,408 @@ +/* + * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR + * + * Copyright (C) 2010 Jarod Wilson + * Copyright (C) 2009 Nuvoton PS Team + * + * Special thanks to Nuvoton for providing hardware, spec sheets and + * sample code upon which portions of this driver are based. Indirect + * thanks also to Maxim Levitsky, whose ene_ir driver this driver is + * modeled after. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 + * USA + */ + +#include +#include + +/* platform driver name to register */ +#define NVT_DRIVER_NAME "nuvoton-cir" + +/* debugging module parameter */ +static int debug; + + +#define nvt_pr(level, text, ...) \ + printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__) + +#define nvt_dbg(text, ...) \ + if (debug) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + +#define nvt_dbg_verbose(text, ...) \ + if (debug > 1) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + +#define nvt_dbg_wake(text, ...) \ + if (debug > 2) \ + printk(KERN_DEBUG \ + KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) + + +/* + * Original lirc driver said min value of 76, and recommended value of 256 + * for the buffer length, but then used 2048. Never mind that the size of the + * RX FIFO is 32 bytes... So I'm using 32 for RX and 256 for TX atm, but I'm + * not sure if maybe that TX value is off by a factor of 8 (bits vs. bytes), + * and I don't have TX-capable hardware to test/debug on... + */ +#define TX_BUF_LEN 256 +#define RX_BUF_LEN 32 + +struct nvt_dev { + struct pnp_dev *pdev; + struct input_dev *rdev; + struct ir_dev_props *props; + struct ir_raw_event rawir; + + spinlock_t nvt_lock; + bool in_use; + + /* for rx */ + u8 buf[RX_BUF_LEN]; + unsigned int pkts; + + struct { + spinlock_t lock; + u8 buf[TX_BUF_LEN]; + unsigned int buf_count; + unsigned int cur_buf_num; + wait_queue_head_t queue; + u8 tx_state; + } tx; + + /* EFER Config register index/data pair */ + u8 cr_efir; + u8 cr_efdr; + + /* hardware I/O settings */ + unsigned long cir_addr; + unsigned long cir_wake_addr; + int cir_irq; + int cir_wake_irq; + + /* hardware id */ + u8 chip_major; + u8 chip_minor; + + /* hardware features */ + bool hw_learning_capable; + bool hw_tx_capable; + + /* rx settings */ + bool learning_enabled; + bool carrier_detect_enabled; + + /* track cir wake state */ + u8 wake_state; + /* for study */ + u8 study_state; + /* carrier period = 1 / frequency */ + u32 carrier; +}; + +/* study states */ +#define ST_STUDY_NONE 0x0 +#define ST_STUDY_START 0x1 +#define ST_STUDY_CARRIER 0x2 +#define ST_STUDY_ALL_RECV 0x4 + +/* wake states */ +#define ST_WAKE_NONE 0x0 +#define ST_WAKE_START 0x1 +#define ST_WAKE_FINISH 0x2 + +/* receive states */ +#define ST_RX_WAIT_7F 0x1 +#define ST_RX_WAIT_HEAD 0x2 +#define ST_RX_WAIT_SILENT_END 0x4 + +/* send states */ +#define ST_TX_NONE 0x0 +#define ST_TX_REQUEST 0x2 +#define ST_TX_REPLY 0x4 + +/* buffer packet constants */ +#define BUF_PULSE_BIT 0x80 +#define BUF_LEN_MASK 0x7f +#define BUF_REPEAT_BYTE 0x70 +#define BUF_REPEAT_MASK 0xf0 + +/* CIR settings */ + +/* total length of CIR and CIR WAKE */ +#define CIR_IOREG_LENGTH 0x0f + +/* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL (0x7d0 = 2000) */ +#define CIR_RX_LIMIT_COUNT 0x7d0 + +/* CIR Regs */ +#define CIR_IRCON 0x00 +#define CIR_IRSTS 0x01 +#define CIR_IREN 0x02 +#define CIR_RXFCONT 0x03 +#define CIR_CP 0x04 +#define CIR_CC 0x05 +#define CIR_SLCH 0x06 +#define CIR_SLCL 0x07 +#define CIR_FIFOCON 0x08 +#define CIR_IRFIFOSTS 0x09 +#define CIR_SRXFIFO 0x0a +#define CIR_TXFCONT 0x0b +#define CIR_STXFIFO 0x0c +#define CIR_FCCH 0x0d +#define CIR_FCCL 0x0e +#define CIR_IRFSM 0x0f + +/* CIR IRCON settings */ +#define CIR_IRCON_RECV 0x80 +#define CIR_IRCON_WIREN 0x40 +#define CIR_IRCON_TXEN 0x20 +#define CIR_IRCON_RXEN 0x10 +#define CIR_IRCON_WRXINV 0x08 +#define CIR_IRCON_RXINV 0x04 + +#define CIR_IRCON_SAMPLE_PERIOD_SEL_1 0x00 +#define CIR_IRCON_SAMPLE_PERIOD_SEL_25 0x01 +#define CIR_IRCON_SAMPLE_PERIOD_SEL_50 0x02 +#define CIR_IRCON_SAMPLE_PERIOD_SEL_100 0x03 + +/* FIXME: make this a runtime option */ +/* select sample period as 50us */ +#define CIR_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50 + +/* CIR IRSTS settings */ +#define CIR_IRSTS_RDR 0x80 +#define CIR_IRSTS_RTR 0x40 +#define CIR_IRSTS_PE 0x20 +#define CIR_IRSTS_RFO 0x10 +#define CIR_IRSTS_TE 0x08 +#define CIR_IRSTS_TTR 0x04 +#define CIR_IRSTS_TFU 0x02 +#define CIR_IRSTS_GH 0x01 + +/* CIR IREN settings */ +#define CIR_IREN_RDR 0x80 +#define CIR_IREN_RTR 0x40 +#define CIR_IREN_PE 0x20 +#define CIR_IREN_RFO 0x10 +#define CIR_IREN_TE 0x08 +#define CIR_IREN_TTR 0x04 +#define CIR_IREN_TFU 0x02 +#define CIR_IREN_GH 0x01 + +/* CIR FIFOCON settings */ +#define CIR_FIFOCON_TXFIFOCLR 0x80 + +#define CIR_FIFOCON_TX_TRIGGER_LEV_31 0x00 +#define CIR_FIFOCON_TX_TRIGGER_LEV_24 0x10 +#define CIR_FIFOCON_TX_TRIGGER_LEV_16 0x20 +#define CIR_FIFOCON_TX_TRIGGER_LEV_8 0x30 + +/* FIXME: make this a runtime option */ +/* select TX trigger level as 16 */ +#define CIR_FIFOCON_TX_TRIGGER_LEV CIR_FIFOCON_TX_TRIGGER_LEV_16 + +#define CIR_FIFOCON_RXFIFOCLR 0x08 + +#define CIR_FIFOCON_RX_TRIGGER_LEV_1 0x00 +#define CIR_FIFOCON_RX_TRIGGER_LEV_8 0x01 +#define CIR_FIFOCON_RX_TRIGGER_LEV_16 0x02 +#define CIR_FIFOCON_RX_TRIGGER_LEV_24 0x03 + +/* FIXME: make this a runtime option */ +/* select RX trigger level as 24 */ +#define CIR_FIFOCON_RX_TRIGGER_LEV CIR_FIFOCON_RX_TRIGGER_LEV_24 + +/* CIR IRFIFOSTS settings */ +#define CIR_IRFIFOSTS_IR_PENDING 0x80 +#define CIR_IRFIFOSTS_RX_GS 0x40 +#define CIR_IRFIFOSTS_RX_FTA 0x20 +#define CIR_IRFIFOSTS_RX_EMPTY 0x10 +#define CIR_IRFIFOSTS_RX_FULL 0x08 +#define CIR_IRFIFOSTS_TX_FTA 0x04 +#define CIR_IRFIFOSTS_TX_EMPTY 0x02 +#define CIR_IRFIFOSTS_TX_FULL 0x01 + + +/* CIR WAKE UP Regs */ +#define CIR_WAKE_IRCON 0x00 +#define CIR_WAKE_IRSTS 0x01 +#define CIR_WAKE_IREN 0x02 +#define CIR_WAKE_FIFO_CMP_DEEP 0x03 +#define CIR_WAKE_FIFO_CMP_TOL 0x04 +#define CIR_WAKE_FIFO_COUNT 0x05 +#define CIR_WAKE_SLCH 0x06 +#define CIR_WAKE_SLCL 0x07 +#define CIR_WAKE_FIFOCON 0x08 +#define CIR_WAKE_SRXFSTS 0x09 +#define CIR_WAKE_SAMPLE_RX_FIFO 0x0a +#define CIR_WAKE_WR_FIFO_DATA 0x0b +#define CIR_WAKE_RD_FIFO_ONLY 0x0c +#define CIR_WAKE_RD_FIFO_ONLY_IDX 0x0d +#define CIR_WAKE_FIFO_IGNORE 0x0e +#define CIR_WAKE_IRFSM 0x0f + +/* CIR WAKE UP IRCON settings */ +#define CIR_WAKE_IRCON_DEC_RST 0x80 +#define CIR_WAKE_IRCON_MODE1 0x40 +#define CIR_WAKE_IRCON_MODE0 0x20 +#define CIR_WAKE_IRCON_RXEN 0x10 +#define CIR_WAKE_IRCON_R 0x08 +#define CIR_WAKE_IRCON_RXINV 0x04 + +/* FIXME/jarod: make this a runtime option */ +/* select a same sample period like cir register */ +#define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50 + +/* CIR WAKE IRSTS Bits */ +#define CIR_WAKE_IRSTS_RDR 0x80 +#define CIR_WAKE_IRSTS_RTR 0x40 +#define CIR_WAKE_IRSTS_PE 0x20 +#define CIR_WAKE_IRSTS_RFO 0x10 +#define CIR_WAKE_IRSTS_GH 0x08 +#define CIR_WAKE_IRSTS_IR_PENDING 0x01 + +/* CIR WAKE UP IREN Bits */ +#define CIR_WAKE_IREN_RDR 0x80 +#define CIR_WAKE_IREN_RTR 0x40 +#define CIR_WAKE_IREN_PE 0x20 +#define CIR_WAKE_IREN_RFO 0x10 +#define CIR_WAKE_IREN_TE 0x08 +#define CIR_WAKE_IREN_TTR 0x04 +#define CIR_WAKE_IREN_TFU 0x02 +#define CIR_WAKE_IREN_GH 0x01 + +/* CIR WAKE FIFOCON settings */ +#define CIR_WAKE_FIFOCON_RXFIFOCLR 0x08 + +#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 0x00 +#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66 0x01 +#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65 0x02 +#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64 0x03 + +/* FIXME: make this a runtime option */ +/* select WAKE UP RX trigger level as 67 */ +#define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 + +/* CIR WAKE SRXFSTS settings */ +#define CIR_WAKE_IRFIFOSTS_RX_GS 0x80 +#define CIR_WAKE_IRFIFOSTS_RX_FTA 0x40 +#define CIR_WAKE_IRFIFOSTS_RX_EMPTY 0x20 +#define CIR_WAKE_IRFIFOSTS_RX_FULL 0x10 + +/* CIR Wake FIFO buffer is 67 bytes long */ +#define CIR_WAKE_FIFO_LEN 67 +/* CIR Wake byte comparison tolerance */ +#define CIR_WAKE_CMP_TOLERANCE 5 + +/* + * Extended Function Enable Registers: + * Extended Function Index Register + * Extended Function Data Register + */ +#define CR_EFIR 0x2e +#define CR_EFDR 0x2f + +/* Possible alternate EFER values, depends on how the chip is wired */ +#define CR_EFIR2 0x4e +#define CR_EFDR2 0x4f + +/* Extended Function Mode enable/disable magic values */ +#define EFER_EFM_ENABLE 0x87 +#define EFER_EFM_DISABLE 0xaa + +/* Chip IDs found in CR_CHIP_ID_{HI,LO} */ +#define CHIP_ID_HIGH 0xb4 +#define CHIP_ID_LOW 0x72 +#define CHIP_ID_LOW2 0x73 + +/* Config regs we need to care about */ +#define CR_SOFTWARE_RESET 0x02 +#define CR_LOGICAL_DEV_SEL 0x07 +#define CR_CHIP_ID_HI 0x20 +#define CR_CHIP_ID_LO 0x21 +#define CR_DEV_POWER_DOWN 0x22 /* bit 2 is CIR power, default power on */ +#define CR_OUTPUT_PIN_SEL 0x27 +#define CR_LOGICAL_DEV_EN 0x30 /* valid for all logical devices */ +/* next three regs valid for both the CIR and CIR_WAKE logical devices */ +#define CR_CIR_BASE_ADDR_HI 0x60 +#define CR_CIR_BASE_ADDR_LO 0x61 +#define CR_CIR_IRQ_RSRC 0x70 +/* next three regs valid only for ACPI logical dev */ +#define CR_ACPI_CIR_WAKE 0xe0 +#define CR_ACPI_IRQ_EVENTS 0xf6 +#define CR_ACPI_IRQ_EVENTS2 0xf7 + +/* Logical devices that we need to care about */ +#define LOGICAL_DEV_LPT 0x01 +#define LOGICAL_DEV_CIR 0x06 +#define LOGICAL_DEV_ACPI 0x0a +#define LOGICAL_DEV_CIR_WAKE 0x0e + +#define LOGICAL_DEV_DISABLE 0x00 +#define LOGICAL_DEV_ENABLE 0x01 + +#define CIR_WAKE_ENABLE_BIT 0x08 +#define CIR_INTR_MOUSE_IRQ_BIT 0x80 +#define PME_INTR_CIR_PASS_BIT 0x08 + +#define OUTPUT_PIN_SEL_MASK 0xbc +#define OUTPUT_ENABLE_CIR 0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */ +#define OUTPUT_ENABLE_CIRWB 0x40 /* enable wide-band sensor */ + +/* MCE CIR signal length, related on sample period */ + +/* MCE CIR controller signal length: about 43ms + * 43ms / 50us (sample period) * 0.85 (inaccuracy) + */ +#define CONTROLLER_BUF_LEN_MIN 830 + +/* MCE CIR keyboard signal length: about 26ms + * 26ms / 50us (sample period) * 0.85 (inaccuracy) + */ +#define KEYBOARD_BUF_LEN_MAX 650 +#define KEYBOARD_BUF_LEN_MIN 610 + +/* MCE CIR mouse signal length: about 24ms + * 24ms / 50us (sample period) * 0.85 (inaccuracy) + */ +#define MOUSE_BUF_LEN_MIN 565 + +#define CIR_SAMPLE_PERIOD 50 +#define CIR_SAMPLE_LOW_INACCURACY 0.85 + +/* MAX silence time that driver will sent to lirc */ +#define MAX_SILENCE_TIME 60000 + +#if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100 +#define SAMPLE_PERIOD 100 + +#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50 +#define SAMPLE_PERIOD 50 + +#elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25 +#define SAMPLE_PERIOD 25 + +#else +#define SAMPLE_PERIOD 1 +#endif + +/* as VISTA MCE definition, valid carrier value */ +#define MAX_CARRIER 60000 +#define MIN_CARRIER 30000