phy: qcom: Add Qualcomm PCIe2 PHY driver
The Qualcomm PCIe2 PHY is based on design from Synopsys and found in several different platforms where the QMP PHY isn't used. Reviewed-by: Niklas Cassel <niklas.cassel@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Bjorn Andersson
Kishon Vijay Abraham I
parent
96ef07f79a
commit
6ef72bc036
@ -24,6 +24,14 @@ config PHY_QCOM_IPQ806X_SATA
|
||||
depends on OF
|
||||
select GENERIC_PHY
|
||||
|
||||
config PHY_QCOM_PCIE2
|
||||
tristate "Qualcomm PCIe Gen2 PHY Driver"
|
||||
depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
|
||||
select GENERIC_PHY
|
||||
help
|
||||
Enable this to support the Qualcomm PCIe PHY, used with the Synopsys
|
||||
based PCIe controller.
|
||||
|
||||
config PHY_QCOM_QMP
|
||||
tristate "Qualcomm QMP PHY Driver"
|
||||
depends on OF && COMMON_CLK && (ARCH_QCOM || COMPILE_TEST)
|
||||
|
||||
@ -2,6 +2,7 @@
|
||||
obj-$(CONFIG_PHY_ATH79_USB) += phy-ath79-usb.o
|
||||
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
|
||||
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
|
||||
obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
|
||||
obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
|
||||
obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
|
||||
|
||||
331
drivers/phy/qualcomm/phy-qcom-pcie2.c
Normal file
331
drivers/phy/qualcomm/phy-qcom-pcie2.c
Normal file
@ -0,0 +1,331 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (c) 2014-2017, The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2019, Linaro Ltd.
|
||||
*/
|
||||
|
||||
#include <linux/clk-provider.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/iopoll.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/phy/phy.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/reset.h>
|
||||
#include <linux/slab.h>
|
||||
|
||||
#include <dt-bindings/phy/phy.h>
|
||||
|
||||
#define PCIE20_PARF_PHY_STTS 0x3c
|
||||
#define PCIE2_PHY_RESET_CTRL 0x44
|
||||
#define PCIE20_PARF_PHY_REFCLK_CTRL2 0xa0
|
||||
#define PCIE20_PARF_PHY_REFCLK_CTRL3 0xa4
|
||||
#define PCIE20_PARF_PCS_SWING_CTRL1 0x88
|
||||
#define PCIE20_PARF_PCS_SWING_CTRL2 0x8c
|
||||
#define PCIE20_PARF_PCS_DEEMPH1 0x74
|
||||
#define PCIE20_PARF_PCS_DEEMPH2 0x78
|
||||
#define PCIE20_PARF_PCS_DEEMPH3 0x7c
|
||||
#define PCIE20_PARF_CONFIGBITS 0x84
|
||||
#define PCIE20_PARF_PHY_CTRL3 0x94
|
||||
#define PCIE20_PARF_PCS_CTRL 0x80
|
||||
|
||||
#define TX_AMP_VAL 120
|
||||
#define PHY_RX0_EQ_GEN1_VAL 0
|
||||
#define PHY_RX0_EQ_GEN2_VAL 4
|
||||
#define TX_DEEMPH_GEN1_VAL 24
|
||||
#define TX_DEEMPH_GEN2_3_5DB_VAL 26
|
||||
#define TX_DEEMPH_GEN2_6DB_VAL 36
|
||||
#define PHY_TX0_TERM_OFFST_VAL 0
|
||||
|
||||
struct qcom_phy {
|
||||
struct device *dev;
|
||||
void __iomem *base;
|
||||
|
||||
struct regulator_bulk_data vregs[2];
|
||||
|
||||
struct reset_control *phy_reset;
|
||||
struct reset_control *pipe_reset;
|
||||
struct clk *pipe_clk;
|
||||
};
|
||||
|
||||
static int qcom_pcie2_phy_init(struct phy *phy)
|
||||
{
|
||||
struct qcom_phy *qphy = phy_get_drvdata(phy);
|
||||
int ret;
|
||||
|
||||
ret = reset_control_deassert(qphy->phy_reset);
|
||||
if (ret) {
|
||||
dev_err(qphy->dev, "cannot deassert pipe reset\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = regulator_bulk_enable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
|
||||
if (ret)
|
||||
reset_control_assert(qphy->phy_reset);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int qcom_pcie2_phy_power_on(struct phy *phy)
|
||||
{
|
||||
struct qcom_phy *qphy = phy_get_drvdata(phy);
|
||||
int ret;
|
||||
u32 val;
|
||||
|
||||
/* Program REF_CLK source */
|
||||
val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
|
||||
val &= ~BIT(1);
|
||||
writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
|
||||
|
||||
usleep_range(1000, 2000);
|
||||
|
||||
/* Don't use PAD for refclock */
|
||||
val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
|
||||
val &= ~BIT(0);
|
||||
writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL2);
|
||||
|
||||
/* Program SSP ENABLE */
|
||||
val = readl(qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3);
|
||||
val |= BIT(0);
|
||||
writel(val, qphy->base + PCIE20_PARF_PHY_REFCLK_CTRL3);
|
||||
|
||||
usleep_range(1000, 2000);
|
||||
|
||||
/* Assert Phy SW Reset */
|
||||
val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
|
||||
val |= BIT(0);
|
||||
writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
|
||||
|
||||
/* Program Tx Amplitude */
|
||||
val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL1);
|
||||
val &= ~0x7f;
|
||||
val |= TX_AMP_VAL;
|
||||
writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL1);
|
||||
|
||||
val = readl(qphy->base + PCIE20_PARF_PCS_SWING_CTRL2);
|
||||
val &= ~0x7f;
|
||||
val |= TX_AMP_VAL;
|
||||
writel(val, qphy->base + PCIE20_PARF_PCS_SWING_CTRL2);
|
||||
|
||||
/* Program De-Emphasis */
|
||||
val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH1);
|
||||
val &= ~0x3f;
|
||||
val |= TX_DEEMPH_GEN2_6DB_VAL;
|
||||
writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH1);
|
||||
|
||||
val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH2);
|
||||
val &= ~0x3f;
|
||||
val |= TX_DEEMPH_GEN2_3_5DB_VAL;
|
||||
writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH2);
|
||||
|
||||
val = readl(qphy->base + PCIE20_PARF_PCS_DEEMPH3);
|
||||
val &= ~0x3f;
|
||||
val |= TX_DEEMPH_GEN1_VAL;
|
||||
writel(val, qphy->base + PCIE20_PARF_PCS_DEEMPH3);
|
||||
|
||||
/* Program Rx_Eq */
|
||||
val = readl(qphy->base + PCIE20_PARF_CONFIGBITS);
|
||||
val &= ~0x7;
|
||||
val |= PHY_RX0_EQ_GEN2_VAL;
|
||||
writel(val, qphy->base + PCIE20_PARF_CONFIGBITS);
|
||||
|
||||
/* Program Tx0_term_offset */
|
||||
val = readl(qphy->base + PCIE20_PARF_PHY_CTRL3);
|
||||
val &= ~0x1f;
|
||||
val |= PHY_TX0_TERM_OFFST_VAL;
|
||||
writel(val, qphy->base + PCIE20_PARF_PHY_CTRL3);
|
||||
|
||||
/* disable Tx2Rx Loopback */
|
||||
val = readl(qphy->base + PCIE20_PARF_PCS_CTRL);
|
||||
val &= ~BIT(1);
|
||||
writel(val, qphy->base + PCIE20_PARF_PCS_CTRL);
|
||||
|
||||
/* De-assert Phy SW Reset */
|
||||
val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
|
||||
val &= ~BIT(0);
|
||||
writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
|
||||
|
||||
usleep_range(1000, 2000);
|
||||
|
||||
ret = reset_control_deassert(qphy->pipe_reset);
|
||||
if (ret) {
|
||||
dev_err(qphy->dev, "cannot deassert pipe reset\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
clk_set_rate(qphy->pipe_clk, 250000000);
|
||||
|
||||
ret = clk_prepare_enable(qphy->pipe_clk);
|
||||
if (ret) {
|
||||
dev_err(qphy->dev, "failed to enable pipe clock\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
ret = readl_poll_timeout(qphy->base + PCIE20_PARF_PHY_STTS, val,
|
||||
!(val & BIT(0)), 1000, 10);
|
||||
if (ret)
|
||||
dev_err(qphy->dev, "phy initialization failed\n");
|
||||
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int qcom_pcie2_phy_power_off(struct phy *phy)
|
||||
{
|
||||
struct qcom_phy *qphy = phy_get_drvdata(phy);
|
||||
u32 val;
|
||||
|
||||
val = readl(qphy->base + PCIE2_PHY_RESET_CTRL);
|
||||
val |= BIT(0);
|
||||
writel(val, qphy->base + PCIE2_PHY_RESET_CTRL);
|
||||
|
||||
clk_disable_unprepare(qphy->pipe_clk);
|
||||
reset_control_assert(qphy->pipe_reset);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int qcom_pcie2_phy_exit(struct phy *phy)
|
||||
{
|
||||
struct qcom_phy *qphy = phy_get_drvdata(phy);
|
||||
|
||||
regulator_bulk_disable(ARRAY_SIZE(qphy->vregs), qphy->vregs);
|
||||
reset_control_assert(qphy->phy_reset);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct phy_ops qcom_pcie2_ops = {
|
||||
.init = qcom_pcie2_phy_init,
|
||||
.power_on = qcom_pcie2_phy_power_on,
|
||||
.power_off = qcom_pcie2_phy_power_off,
|
||||
.exit = qcom_pcie2_phy_exit,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
/*
|
||||
* Register a fixed rate pipe clock.
|
||||
*
|
||||
* The <s>_pipe_clksrc generated by PHY goes to the GCC that gate
|
||||
* controls it. The <s>_pipe_clk coming out of the GCC is requested
|
||||
* by the PHY driver for its operations.
|
||||
* We register the <s>_pipe_clksrc here. The gcc driver takes care
|
||||
* of assigning this <s>_pipe_clksrc as parent to <s>_pipe_clk.
|
||||
* Below picture shows this relationship.
|
||||
*
|
||||
* +---------------+
|
||||
* | PHY block |<<---------------------------------------+
|
||||
* | | |
|
||||
* | +-------+ | +-----+ |
|
||||
* I/P---^-->| PLL |---^--->pipe_clksrc--->| GCC |--->pipe_clk---+
|
||||
* clk | +-------+ | +-----+
|
||||
* +---------------+
|
||||
*/
|
||||
static int phy_pipe_clksrc_register(struct qcom_phy *qphy)
|
||||
{
|
||||
struct device_node *np = qphy->dev->of_node;
|
||||
struct clk_fixed_rate *fixed;
|
||||
struct clk_init_data init = { };
|
||||
int ret;
|
||||
|
||||
ret = of_property_read_string(np, "clock-output-names", &init.name);
|
||||
if (ret) {
|
||||
dev_err(qphy->dev, "%s: No clock-output-names\n", np->name);
|
||||
return ret;
|
||||
}
|
||||
|
||||
fixed = devm_kzalloc(qphy->dev, sizeof(*fixed), GFP_KERNEL);
|
||||
if (!fixed)
|
||||
return -ENOMEM;
|
||||
|
||||
init.ops = &clk_fixed_rate_ops;
|
||||
|
||||
/* controllers using QMP phys use 250MHz pipe clock interface */
|
||||
fixed->fixed_rate = 250000000;
|
||||
fixed->hw.init = &init;
|
||||
|
||||
return devm_clk_hw_register(qphy->dev, &fixed->hw);
|
||||
}
|
||||
|
||||
static int qcom_pcie2_phy_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct phy_provider *phy_provider;
|
||||
struct qcom_phy *qphy;
|
||||
struct resource *res;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct phy *phy;
|
||||
int ret;
|
||||
|
||||
qphy = devm_kzalloc(dev, sizeof(*qphy), GFP_KERNEL);
|
||||
if (!qphy)
|
||||
return -ENOMEM;
|
||||
|
||||
qphy->dev = dev;
|
||||
|
||||
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
qphy->base = devm_ioremap_resource(dev, res);
|
||||
if (IS_ERR(qphy->base))
|
||||
return PTR_ERR(qphy->base);
|
||||
|
||||
ret = phy_pipe_clksrc_register(qphy);
|
||||
if (ret) {
|
||||
dev_err(dev, "failed to register pipe_clk\n");
|
||||
return ret;
|
||||
}
|
||||
|
||||
qphy->vregs[0].supply = "vdda-vp";
|
||||
qphy->vregs[1].supply = "vdda-vph";
|
||||
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(qphy->vregs), qphy->vregs);
|
||||
if (ret < 0)
|
||||
return ret;
|
||||
|
||||
qphy->pipe_clk = devm_clk_get(dev, NULL);
|
||||
if (IS_ERR(qphy->pipe_clk)) {
|
||||
dev_err(dev, "failed to acquire pipe clock\n");
|
||||
return PTR_ERR(qphy->pipe_clk);
|
||||
}
|
||||
|
||||
qphy->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
|
||||
if (IS_ERR(qphy->phy_reset)) {
|
||||
dev_err(dev, "failed to acquire phy reset\n");
|
||||
return PTR_ERR(qphy->phy_reset);
|
||||
}
|
||||
|
||||
qphy->pipe_reset = devm_reset_control_get_exclusive(dev, "pipe");
|
||||
if (IS_ERR(qphy->pipe_reset)) {
|
||||
dev_err(dev, "failed to acquire pipe reset\n");
|
||||
return PTR_ERR(qphy->pipe_reset);
|
||||
}
|
||||
|
||||
phy = devm_phy_create(dev, dev->of_node, &qcom_pcie2_ops);
|
||||
if (IS_ERR(phy)) {
|
||||
dev_err(dev, "failed to create phy\n");
|
||||
return PTR_ERR(phy);
|
||||
}
|
||||
|
||||
phy_set_drvdata(phy, qphy);
|
||||
|
||||
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
|
||||
if (IS_ERR(phy_provider))
|
||||
dev_err(dev, "failed to register phy provider\n");
|
||||
|
||||
return PTR_ERR_OR_ZERO(phy_provider);
|
||||
}
|
||||
|
||||
static const struct of_device_id qcom_pcie2_phy_match_table[] = {
|
||||
{ .compatible = "qcom,pcie2-phy" },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, qcom_pcie2_phy_match_table);
|
||||
|
||||
static struct platform_driver qcom_pcie2_phy_driver = {
|
||||
.probe = qcom_pcie2_phy_probe,
|
||||
.driver = {
|
||||
.name = "phy-qcom-pcie2",
|
||||
.of_match_table = qcom_pcie2_phy_match_table,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(qcom_pcie2_phy_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Qualcomm PCIe PHY driver");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Loading…
Reference in New Issue
Block a user