From 3b7509b6f5e2d4ee1f7d0de5fdea06950afe5e60 Mon Sep 17 00:00:00 2001 From: William Breathitt Gray Date: Sun, 12 Mar 2023 19:15:49 -0400 Subject: [PATCH 001/755] counter: 104-quad-8: Fix race condition between FLAG and CNTR reads commit 4aa3b75c74603c3374877d5fd18ad9cc3a9a62ed upstream. The Counter (CNTR) register is 24 bits wide, but we can have an effective 25-bit count value by setting bit 24 to the XOR of the Borrow flag and Carry flag. The flags can be read from the FLAG register, but a race condition exists: the Borrow flag and Carry flag are instantaneous and could change by the time the count value is read from the CNTR register. Since the race condition could result in an incorrect 25-bit count value, remove support for 25-bit count values from this driver; hard-coded maximum count values are replaced by a LS7267_CNTR_MAX define for consistency and clarity. Fixes: 28e5d3bb0325 ("iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8") Cc: # 6.1.x Cc: # 6.2.x Link: https://lore.kernel.org/r/20230312231554.134858-1-william.gray@linaro.org/ Signed-off-by: William Breathitt Gray Signed-off-by: Greg Kroah-Hartman --- drivers/counter/104-quad-8.c | 30 ++++-------------------------- 1 file changed, 4 insertions(+), 26 deletions(-) diff --git a/drivers/counter/104-quad-8.c b/drivers/counter/104-quad-8.c index f261a57af1c0..919d6f1ced8d 100644 --- a/drivers/counter/104-quad-8.c +++ b/drivers/counter/104-quad-8.c @@ -57,10 +57,6 @@ struct quad8_iio { #define QUAD8_REG_CHAN_OP 0x11 #define QUAD8_REG_INDEX_INPUT_LEVELS 0x16 -/* Borrow Toggle flip-flop */ -#define QUAD8_FLAG_BT BIT(0) -/* Carry Toggle flip-flop */ -#define QUAD8_FLAG_CT BIT(1) /* Error flag */ #define QUAD8_FLAG_E BIT(4) /* Up/Down flag */ @@ -97,9 +93,6 @@ static int quad8_read_raw(struct iio_dev *indio_dev, { struct quad8_iio *const priv = iio_priv(indio_dev); const int base_offset = priv->base + 2 * chan->channel; - unsigned int flags; - unsigned int borrow; - unsigned int carry; int i; switch (mask) { @@ -110,12 +103,7 @@ static int quad8_read_raw(struct iio_dev *indio_dev, return IIO_VAL_INT; } - flags = inb(base_offset + 1); - borrow = flags & QUAD8_FLAG_BT; - carry = !!(flags & QUAD8_FLAG_CT); - - /* Borrow XOR Carry effectively doubles count range */ - *val = (borrow ^ carry) << 24; + *val = 0; mutex_lock(&priv->lock); @@ -639,19 +627,9 @@ static int quad8_count_read(struct counter_device *counter, { struct quad8_iio *const priv = counter->priv; const int base_offset = priv->base + 2 * count->id; - unsigned int flags; - unsigned int borrow; - unsigned int carry; - unsigned long position; + unsigned long position = 0; int i; - flags = inb(base_offset + 1); - borrow = flags & QUAD8_FLAG_BT; - carry = !!(flags & QUAD8_FLAG_CT); - - /* Borrow XOR Carry effectively doubles count range */ - position = (unsigned long)(borrow ^ carry) << 24; - mutex_lock(&priv->lock); /* Reset Byte Pointer; transfer Counter to Output Latch */ @@ -1204,8 +1182,8 @@ static ssize_t quad8_count_ceiling_read(struct counter_device *counter, mutex_unlock(&priv->lock); - /* By default 0x1FFFFFF (25 bits unsigned) is maximum count */ - return sprintf(buf, "33554431\n"); + /* By default 0xFFFFFF (24 bits unsigned) is maximum count */ + return sprintf(buf, "16777215\n"); } static ssize_t quad8_count_ceiling_write(struct counter_device *counter, From 425eea395f1f5ae349fb55f7fe51d833a5324bfe Mon Sep 17 00:00:00 2001 From: Jisoo Jang Date: Thu, 9 Mar 2023 19:44:57 +0900 Subject: [PATCH 002/755] wifi: brcmfmac: slab-out-of-bounds read in brcmf_get_assoc_ies() commit 0da40e018fd034d87c9460123fa7f897b69fdee7 upstream. Fix a slab-out-of-bounds read that occurs in kmemdup() called from brcmf_get_assoc_ies(). The bug could occur when assoc_info->req_len, data from a URB provided by a USB device, is bigger than the size of buffer which is defined as WL_EXTRA_BUF_MAX. Add the size check for req_len/resp_len of assoc_info. Found by a modified version of syzkaller. [ 46.592467][ T7] ================================================================== [ 46.594687][ T7] BUG: KASAN: slab-out-of-bounds in kmemdup+0x3e/0x50 [ 46.596572][ T7] Read of size 3014656 at addr ffff888019442000 by task kworker/0:1/7 [ 46.598575][ T7] [ 46.599157][ T7] CPU: 0 PID: 7 Comm: kworker/0:1 Tainted: G O 5.14.0+ #145 [ 46.601333][ T7] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 46.604360][ T7] Workqueue: events brcmf_fweh_event_worker [ 46.605943][ T7] Call Trace: [ 46.606584][ T7] dump_stack_lvl+0x8e/0xd1 [ 46.607446][ T7] print_address_description.constprop.0.cold+0x93/0x334 [ 46.608610][ T7] ? kmemdup+0x3e/0x50 [ 46.609341][ T7] kasan_report.cold+0x79/0xd5 [ 46.610151][ T7] ? kmemdup+0x3e/0x50 [ 46.610796][ T7] kasan_check_range+0x14e/0x1b0 [ 46.611691][ T7] memcpy+0x20/0x60 [ 46.612323][ T7] kmemdup+0x3e/0x50 [ 46.612987][ T7] brcmf_get_assoc_ies+0x967/0xf60 [ 46.613904][ T7] ? brcmf_notify_vif_event+0x3d0/0x3d0 [ 46.614831][ T7] ? lock_chain_count+0x20/0x20 [ 46.615683][ T7] ? mark_lock.part.0+0xfc/0x2770 [ 46.616552][ T7] ? lock_chain_count+0x20/0x20 [ 46.617409][ T7] ? mark_lock.part.0+0xfc/0x2770 [ 46.618244][ T7] ? lock_chain_count+0x20/0x20 [ 46.619024][ T7] brcmf_bss_connect_done.constprop.0+0x241/0x2e0 [ 46.620019][ T7] ? brcmf_parse_configure_security.isra.0+0x2a0/0x2a0 [ 46.620818][ T7] ? __lock_acquire+0x181f/0x5790 [ 46.621462][ T7] brcmf_notify_connect_status+0x448/0x1950 [ 46.622134][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 46.622736][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0 [ 46.623390][ T7] ? find_held_lock+0x2d/0x110 [ 46.623962][ T7] ? brcmf_fweh_event_worker+0x19f/0xc60 [ 46.624603][ T7] ? mark_held_locks+0x9f/0xe0 [ 46.625145][ T7] ? lockdep_hardirqs_on_prepare+0x3e0/0x3e0 [ 46.625871][ T7] ? brcmf_cfg80211_join_ibss+0x7b0/0x7b0 [ 46.626545][ T7] brcmf_fweh_call_event_handler.isra.0+0x90/0x100 [ 46.627338][ T7] brcmf_fweh_event_worker+0x557/0xc60 [ 46.627962][ T7] ? brcmf_fweh_call_event_handler.isra.0+0x100/0x100 [ 46.628736][ T7] ? rcu_read_lock_sched_held+0xa1/0xd0 [ 46.629396][ T7] ? rcu_read_lock_bh_held+0xb0/0xb0 [ 46.629970][ T7] ? lockdep_hardirqs_on_prepare+0x273/0x3e0 [ 46.630649][ T7] process_one_work+0x92b/0x1460 [ 46.631205][ T7] ? pwq_dec_nr_in_flight+0x330/0x330 [ 46.631821][ T7] ? rwlock_bug.part.0+0x90/0x90 [ 46.632347][ T7] worker_thread+0x95/0xe00 [ 46.632832][ T7] ? __kthread_parkme+0x115/0x1e0 [ 46.633393][ T7] ? process_one_work+0x1460/0x1460 [ 46.633957][ T7] kthread+0x3a1/0x480 [ 46.634369][ T7] ? set_kthread_struct+0x120/0x120 [ 46.634933][ T7] ret_from_fork+0x1f/0x30 [ 46.635431][ T7] [ 46.635687][ T7] Allocated by task 7: [ 46.636151][ T7] kasan_save_stack+0x1b/0x40 [ 46.636628][ T7] __kasan_kmalloc+0x7c/0x90 [ 46.637108][ T7] kmem_cache_alloc_trace+0x19e/0x330 [ 46.637696][ T7] brcmf_cfg80211_attach+0x4a0/0x4040 [ 46.638275][ T7] brcmf_attach+0x389/0xd40 [ 46.638739][ T7] brcmf_usb_probe+0x12de/0x1690 [ 46.639279][ T7] usb_probe_interface+0x2aa/0x760 [ 46.639820][ T7] really_probe+0x205/0xb70 [ 46.640342][ T7] __driver_probe_device+0x311/0x4b0 [ 46.640876][ T7] driver_probe_device+0x4e/0x150 [ 46.641445][ T7] __device_attach_driver+0x1cc/0x2a0 [ 46.642000][ T7] bus_for_each_drv+0x156/0x1d0 [ 46.642543][ T7] __device_attach+0x23f/0x3a0 [ 46.643065][ T7] bus_probe_device+0x1da/0x290 [ 46.643644][ T7] device_add+0xb7b/0x1eb0 [ 46.644130][ T7] usb_set_configuration+0xf59/0x16f0 [ 46.644720][ T7] usb_generic_driver_probe+0x82/0xa0 [ 46.645295][ T7] usb_probe_device+0xbb/0x250 [ 46.645786][ T7] really_probe+0x205/0xb70 [ 46.646258][ T7] __driver_probe_device+0x311/0x4b0 [ 46.646804][ T7] driver_probe_device+0x4e/0x150 [ 46.647387][ T7] __device_attach_driver+0x1cc/0x2a0 [ 46.647926][ T7] bus_for_each_drv+0x156/0x1d0 [ 46.648454][ T7] __device_attach+0x23f/0x3a0 [ 46.648939][ T7] bus_probe_device+0x1da/0x290 [ 46.649478][ T7] device_add+0xb7b/0x1eb0 [ 46.649936][ T7] usb_new_device.cold+0x49c/0x1029 [ 46.650526][ T7] hub_event+0x1c98/0x3950 [ 46.650975][ T7] process_one_work+0x92b/0x1460 [ 46.651535][ T7] worker_thread+0x95/0xe00 [ 46.651991][ T7] kthread+0x3a1/0x480 [ 46.652413][ T7] ret_from_fork+0x1f/0x30 [ 46.652885][ T7] [ 46.653131][ T7] The buggy address belongs to the object at ffff888019442000 [ 46.653131][ T7] which belongs to the cache kmalloc-2k of size 2048 [ 46.654669][ T7] The buggy address is located 0 bytes inside of [ 46.654669][ T7] 2048-byte region [ffff888019442000, ffff888019442800) [ 46.656137][ T7] The buggy address belongs to the page: [ 46.656720][ T7] page:ffffea0000651000 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x19440 [ 46.657792][ T7] head:ffffea0000651000 order:3 compound_mapcount:0 compound_pincount:0 [ 46.658673][ T7] flags: 0x100000000010200(slab|head|node=0|zone=1) [ 46.659422][ T7] raw: 0100000000010200 0000000000000000 dead000000000122 ffff888100042000 [ 46.660363][ T7] raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 [ 46.661236][ T7] page dumped because: kasan: bad access detected [ 46.661956][ T7] page_owner tracks the page as allocated [ 46.662588][ T7] page last allocated via order 3, migratetype Unmovable, gfp_mask 0x52a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP), pid 7, ts 31136961085, free_ts 0 [ 46.664271][ T7] prep_new_page+0x1aa/0x240 [ 46.664763][ T7] get_page_from_freelist+0x159a/0x27c0 [ 46.665340][ T7] __alloc_pages+0x2da/0x6a0 [ 46.665847][ T7] alloc_pages+0xec/0x1e0 [ 46.666308][ T7] allocate_slab+0x380/0x4e0 [ 46.666770][ T7] ___slab_alloc+0x5bc/0x940 [ 46.667264][ T7] __slab_alloc+0x6d/0x80 [ 46.667712][ T7] kmem_cache_alloc_trace+0x30a/0x330 [ 46.668299][ T7] brcmf_usbdev_qinit.constprop.0+0x50/0x470 [ 46.668885][ T7] brcmf_usb_probe+0xc97/0x1690 [ 46.669438][ T7] usb_probe_interface+0x2aa/0x760 [ 46.669988][ T7] really_probe+0x205/0xb70 [ 46.670487][ T7] __driver_probe_device+0x311/0x4b0 [ 46.671031][ T7] driver_probe_device+0x4e/0x150 [ 46.671604][ T7] __device_attach_driver+0x1cc/0x2a0 [ 46.672192][ T7] bus_for_each_drv+0x156/0x1d0 [ 46.672739][ T7] page_owner free stack trace missing [ 46.673335][ T7] [ 46.673620][ T7] Memory state around the buggy address: [ 46.674213][ T7] ffff888019442700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 46.675083][ T7] ffff888019442780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 46.675994][ T7] >ffff888019442800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 46.676875][ T7] ^ [ 46.677323][ T7] ffff888019442880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 46.678190][ T7] ffff888019442900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 46.679052][ T7] ================================================================== [ 46.679945][ T7] Disabling lock debugging due to kernel taint [ 46.680725][ T7] Kernel panic - not syncing: Reviewed-by: Arend van Spriel Signed-off-by: Jisoo Jang Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230309104457.22628-1-jisoo.jang@yonsei.ac.kr Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index cd146bbca670..5bfff309f547 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -5466,6 +5466,11 @@ static s32 brcmf_get_assoc_ies(struct brcmf_cfg80211_info *cfg, (struct brcmf_cfg80211_assoc_ielen_le *)cfg->extra_buf; req_len = le32_to_cpu(assoc_info->req_len); resp_len = le32_to_cpu(assoc_info->resp_len); + if (req_len > WL_EXTRA_BUF_MAX || resp_len > WL_EXTRA_BUF_MAX) { + bphy_err(drvr, "invalid lengths in assoc info: req %u resp %u\n", + req_len, resp_len); + return -EINVAL; + } if (req_len) { err = brcmf_fil_iovar_data_get(ifp, "assoc_req_ies", cfg->extra_buf, From c8258fc827c87715683d77e0b8e32f36c921bffa Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 4 Apr 2023 21:40:36 +0200 Subject: [PATCH 003/755] drm/fb-helper: set x/yres_virtual in drm_fb_helper_check_var commit 1935f0deb6116dd785ea64d8035eab0ff441255b upstream. Drivers are supposed to fix this up if needed if they don't outright reject it. Uncovered by 6c11df58fd1a ("fbmem: Check virtual screen sizes in fb_set_var()"). Reported-by: syzbot+20dcf81733d43ddff661@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=c5faf983bfa4a607de530cd3bb008888bf06cefc Cc: stable@vger.kernel.org # v5.4+ Cc: Daniel Vetter Cc: Javier Martinez Canillas Cc: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20230404194038.472803-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/drm_fb_helper.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c index 4ae68bf04892..9eb490a6e016 100644 --- a/drivers/gpu/drm/drm_fb_helper.c +++ b/drivers/gpu/drm/drm_fb_helper.c @@ -1340,6 +1340,9 @@ int drm_fb_helper_check_var(struct fb_var_screeninfo *var, return -EINVAL; } + var->xres_virtual = fb->width; + var->yres_virtual = fb->height; + /* * Workaround for SDL 1.2, which is known to be setting all pixel format * fields values to zero in some cases. We treat this situation as a From 48cdcb40d589d990ccc1a99fb76843484ce732a0 Mon Sep 17 00:00:00 2001 From: Ruihan Li Date: Sun, 16 Apr 2023 16:14:04 +0800 Subject: [PATCH 004/755] bluetooth: Perform careful capability checks in hci_sock_ioctl() commit 25c150ac103a4ebeed0319994c742a90634ddf18 upstream. Previously, capability was checked using capable(), which verified that the caller of the ioctl system call had the required capability. In addition, the result of the check would be stored in the HCI_SOCK_TRUSTED flag, making it persistent for the socket. However, malicious programs can abuse this approach by deliberately sharing an HCI socket with a privileged task. The HCI socket will be marked as trusted when the privileged task occasionally makes an ioctl call. This problem can be solved by using sk_capable() to check capability, which ensures that not only the current task but also the socket opener has the specified capability, thus reducing the risk of privilege escalation through the previously identified vulnerability. Cc: stable@vger.kernel.org Fixes: f81f5b2db869 ("Bluetooth: Send control open and close messages for HCI raw sockets") Signed-off-by: Ruihan Li Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman --- net/bluetooth/hci_sock.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index a5205dc95e8f..4f8f5204ae7a 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -989,7 +989,14 @@ static int hci_sock_ioctl(struct socket *sock, unsigned int cmd, if (hci_sock_gen_cookie(sk)) { struct sk_buff *skb; - if (capable(CAP_NET_ADMIN)) + /* Perform careful checks before setting the HCI_SOCK_TRUSTED + * flag. Make sure that not only the current task but also + * the socket opener has the required capability, since + * privileged programs can be tricked into making ioctl calls + * on HCI sockets, and the socket should not be marked as + * trusted simply because the ioctl caller is privileged. + */ + if (sk_capable(sk, CAP_NET_ADMIN)) hci_sock_set_flag(sk, HCI_SOCK_TRUSTED); /* Send event to monitor */ From 85ed09c3302165ed23489e8fff13681ae5852de7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= Date: Mon, 17 Apr 2023 18:20:03 +0300 Subject: [PATCH 005/755] USB: serial: option: add UNISOC vendor and TOZED LT70C product MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit a095edfc15f0832e046ae23964e249ef5c95af87 upstream. Add UNISOC vendor ID and TOZED LT70-C modem which is based from UNISOC SL8563. The modem supports the NCM mode. Interface 0 is used for running the AT commands. Interface 12 is the ADB interface. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1782 ProdID=4055 Rev=04.04 S: Manufacturer=Unisoc Phone S: Product=Unisoc Phone S: SerialNumber= C: #Ifs=14 Cfg#= 1 Atr=c0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=10 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=11 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=12 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8d(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=13 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=84(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=86(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 6 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0d Prot=00 Driver=cdc_ncm E: Ad=88(I) Atr=03(Int.) MxPS= 16 Ivl=32ms I: If#= 7 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=cdc_ncm E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 9 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Arınç ÜNAL Link: https://lore.kernel.org/r/20230417152003.243248-1-arinc.unal@arinc9.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e51ed6b45a47..972d9ddb0473 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -595,6 +595,11 @@ static void option_instat_callback(struct urb *urb); #define SIERRA_VENDOR_ID 0x1199 #define SIERRA_PRODUCT_EM9191 0x90d3 +/* UNISOC (Spreadtrum) products */ +#define UNISOC_VENDOR_ID 0x1782 +/* TOZED LT70-C based on UNISOC SL8563 uses UNISOC's vendor ID */ +#define TOZED_PRODUCT_LT70C 0x4055 + /* Device flags */ /* Highest interface number which can be used with NCTRL() and RSVD() */ @@ -2225,6 +2230,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(OPPO_VENDOR_ID, OPPO_PRODUCT_R11, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(SIERRA_VENDOR_ID, SIERRA_PRODUCT_EM9191, 0xff, 0, 0) }, + { USB_DEVICE_AND_INTERFACE_INFO(UNISOC_VENDOR_ID, TOZED_PRODUCT_LT70C, 0xff, 0, 0) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); From f00e4bfd7f08018db5f57ed6a5f0a6b00cc1d3c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Patrik=20Dahlstr=C3=B6m?= Date: Mon, 13 Mar 2023 21:50:29 +0100 Subject: [PATCH 006/755] iio: adc: palmas_gpadc: fix NULL dereference on rmmod MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 49f76c499d38bf67803438eee88c8300d0f6ce09 ] Calling dev_to_iio_dev() on a platform device pointer is undefined and will make adc NULL. Signed-off-by: Patrik Dahlström Link: https://lore.kernel.org/r/20230313205029.1881745-1-risca@dalakolonin.se Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin --- drivers/iio/adc/palmas_gpadc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/iio/adc/palmas_gpadc.c b/drivers/iio/adc/palmas_gpadc.c index 2bd785e9e42a..4861093b0764 100644 --- a/drivers/iio/adc/palmas_gpadc.c +++ b/drivers/iio/adc/palmas_gpadc.c @@ -630,7 +630,7 @@ out: static int palmas_gpadc_remove(struct platform_device *pdev) { - struct iio_dev *indio_dev = dev_to_iio_dev(&pdev->dev); + struct iio_dev *indio_dev = dev_get_drvdata(&pdev->dev); struct palmas_gpadc *adc = iio_priv(indio_dev); if (adc->wakeup1_enable || adc->wakeup2_enable) From 944ff47a19f25ae2bb1132d73d1a1d32bee5d58d Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Wed, 22 Mar 2023 15:53:32 +0100 Subject: [PATCH 007/755] ASoC: Intel: bytcr_rt5640: Add quirk for the Acer Iconia One 7 B1-750 [ Upstream commit e38c5e80c3d293a883c6f1d553f2146ec0bda35e ] The Acer Iconia One 7 B1-750 tablet mostly works fine with the defaults for an Bay Trail CR tablet. Except for the internal mic, instead of an analog mic on IN3 a digital mic on DMIC1 is uses. Add a quirk with these settings for this tablet. Acked-by: Pierre-Louis Bossart Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20230322145332.131525-1-hdegoede@redhat.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/intel/boards/bytcr_rt5640.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 6a8edb0a559d..df3b370fe729 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -391,6 +391,18 @@ static int byt_rt5640_aif1_hw_params(struct snd_pcm_substream *substream, /* Please keep this list alphabetically sorted */ static const struct dmi_system_id byt_rt5640_quirk_table[] = { + { /* Acer Iconia One 7 B1-750 */ + .matches = { + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Insyde"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "VESPA2"), + }, + .driver_data = (void *)(BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD1_IN4P | + BYT_RT5640_OVCD_TH_1500UA | + BYT_RT5640_OVCD_SF_0P75 | + BYT_RT5640_SSP0_AIF1 | + BYT_RT5640_MCLK_EN), + }, { /* Acer Iconia Tab 8 W1-810 */ .matches = { DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Acer"), From 0804f3715c09db656d429186a5657ba6b53f9af4 Mon Sep 17 00:00:00 2001 From: Vladimir Oltean Date: Mon, 9 Jan 2023 15:11:52 +0200 Subject: [PATCH 008/755] asm-generic/io.h: suppress endianness warnings for readq() and writeq() [ Upstream commit d564fa1ff19e893e2971d66e5c8f49dc1cdc8ffc ] Commit c1d55d50139b ("asm-generic/io.h: Fix sparse warnings on big-endian architectures") missed fixing the 64-bit accessors. Arnd explains in the attached link why the casts are necessary, even if __raw_readq() and __raw_writeq() do not take endian-specific types. Link: https://lore.kernel.org/lkml/9105d6fc-880b-4734-857d-e3d30b87ccf6@app.fastmail.com/ Suggested-by: Arnd Bergmann Signed-off-by: Vladimir Oltean Reviewed-by: Jonathan Cameron Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin --- include/asm-generic/io.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/asm-generic/io.h b/include/asm-generic/io.h index d02806513670..3dd3416f1df0 100644 --- a/include/asm-generic/io.h +++ b/include/asm-generic/io.h @@ -190,7 +190,7 @@ static inline u64 readq(const volatile void __iomem *addr) u64 val; __io_br(); - val = __le64_to_cpu(__raw_readq(addr)); + val = __le64_to_cpu((__le64 __force)__raw_readq(addr)); __io_ar(val); return val; } @@ -233,7 +233,7 @@ static inline void writel(u32 value, volatile void __iomem *addr) static inline void writeq(u64 value, volatile void __iomem *addr) { __io_bw(); - __raw_writeq(__cpu_to_le64(value), addr); + __raw_writeq((u64 __force)__cpu_to_le64(value), addr); __io_aw(); } #endif From 2d5844aa6e56b1074792ac529d2d2a1c51a1e94d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 4 Apr 2023 09:25:14 +0200 Subject: [PATCH 009/755] USB: dwc3: fix runtime pm imbalance on probe errors commit 9a8ad10c9f2e0925ff26308ec6756b93fc2f4977 upstream. Make sure not to suspend the device when probe fails to avoid disabling clocks and phys multiple times. Fixes: 328082376aea ("usb: dwc3: fix runtime PM in error path") Cc: stable@vger.kernel.org # 4.8 Cc: Roger Quadros Acked-by: Thinh Nguyen Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20230404072524.19014-2-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index db1aaed07e05..854820b31e40 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1496,13 +1496,11 @@ static int dwc3_probe(struct platform_device *pdev) spin_lock_init(&dwc->lock); + pm_runtime_get_noresume(dev); pm_runtime_set_active(dev); pm_runtime_use_autosuspend(dev); pm_runtime_set_autosuspend_delay(dev, DWC3_DEFAULT_AUTOSUSPEND_DELAY); pm_runtime_enable(dev); - ret = pm_runtime_get_sync(dev); - if (ret < 0) - goto err1; pm_runtime_forbid(dev); @@ -1562,12 +1560,10 @@ err3: dwc3_free_event_buffers(dwc); err2: - pm_runtime_allow(&pdev->dev); - -err1: - pm_runtime_put_sync(&pdev->dev); - pm_runtime_disable(&pdev->dev); - + pm_runtime_allow(dev); + pm_runtime_disable(dev); + pm_runtime_set_suspended(dev); + pm_runtime_put_noidle(dev); disable_clks: clk_bulk_disable_unprepare(dwc->num_clks, dwc->clks); assert_reset: From 6525d2fd6f8340e773b194845a3880ecacc753fd Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 4 Apr 2023 09:25:15 +0200 Subject: [PATCH 010/755] USB: dwc3: fix runtime pm imbalance on unbind commit 44d257e9012ee8040e41d224d0e5bfb5ef5427ea upstream. Make sure to balance the runtime PM usage count on driver unbind by adding back the pm_runtime_allow() call that had been erroneously removed. Fixes: 266d0493900a ("usb: dwc3: core: don't trigger runtime pm when remove driver") Cc: stable@vger.kernel.org # 5.9 Cc: Li Jun Acked-by: Thinh Nguyen Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20230404072524.19014-3-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 854820b31e40..27b60623c280 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -1584,6 +1584,7 @@ static int dwc3_remove(struct platform_device *pdev) dwc3_core_exit(dwc); dwc3_ulpi_exit(dwc); + pm_runtime_allow(&pdev->dev); pm_runtime_disable(&pdev->dev); pm_runtime_put_noidle(&pdev->dev); pm_runtime_set_suspended(&pdev->dev); From fbd11f086bf1022a3c5bf9b29573e1f07ae0dbd6 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Wed, 14 Jul 2021 13:06:38 -0300 Subject: [PATCH 011/755] perf sched: Cast PTHREAD_STACK_MIN to int as it may turn into sysconf(__SC_THREAD_STACK_MIN_VALUE) commit d08c84e01afa7a7eee6badab25d5420fa847f783 upstream. In fedora rawhide the PTHREAD_STACK_MIN define may end up expanded to a sysconf() call, and that will return 'long int', breaking the build: 45 fedora:rawhide : FAIL gcc version 11.1.1 20210623 (Red Hat 11.1.1-6) (GCC) builtin-sched.c: In function 'create_tasks': /git/perf-5.14.0-rc1/tools/include/linux/kernel.h:43:24: error: comparison of distinct pointer types lacks a cast [-Werror] 43 | (void) (&_max1 == &_max2); \ | ^~ builtin-sched.c:673:34: note: in expansion of macro 'max' 673 | (size_t) max(16 * 1024, PTHREAD_STACK_MIN)); | ^~~ cc1: all warnings being treated as errors $ grep __sysconf /usr/include/*/*.h /usr/include/bits/pthread_stack_min-dynamic.h:extern long int __sysconf (int __name) __THROW; /usr/include/bits/pthread_stack_min-dynamic.h:# define PTHREAD_STACK_MIN __sysconf (__SC_THREAD_STACK_MIN_VALUE) /usr/include/bits/time.h:extern long int __sysconf (int); /usr/include/bits/time.h:# define CLK_TCK ((__clock_t) __sysconf (2)) /* 2 is _SC_CLK_TCK */ $ So cast it to int to cope with that. Signed-off-by: Arnaldo Carvalho de Melo Cc: Guenter Roeck Signed-off-by: Greg Kroah-Hartman --- tools/perf/builtin-sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c index 5cacc4f84c8d..0826893098ce 100644 --- a/tools/perf/builtin-sched.c +++ b/tools/perf/builtin-sched.c @@ -666,7 +666,7 @@ static void create_tasks(struct perf_sched *sched) err = pthread_attr_init(&attr); BUG_ON(err); err = pthread_attr_setstacksize(&attr, - (size_t) max(16 * 1024, PTHREAD_STACK_MIN)); + (size_t) max(16 * 1024, (int)PTHREAD_STACK_MIN)); BUG_ON(err); err = pthread_mutex_lock(&sched->start_work_mutex); BUG_ON(err); From 2298b30010fde2a47cdaef476d0226cdebec151f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Nuno=20S=C3=A1?= Date: Mon, 27 Mar 2023 16:54:14 +0200 Subject: [PATCH 012/755] staging: iio: resolver: ads1210: fix config mode MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 16313403d873ff17a587818b61f84c8cb4971cef upstream. As stated in the device datasheet [1], bits a0 and a1 have to be set to 1 for the configuration mode. [1]: https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf Fixes: b19e9ad5e2cb9 ("staging:iio:resolver:ad2s1210 general driver cleanup") Cc: stable Signed-off-by: Nuno Sá Link: https://lore.kernel.org/r/20230327145414.1505537-1-nuno.sa@analog.com Signed-off-by: Greg Kroah-Hartman --- drivers/staging/iio/resolver/ad2s1210.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/staging/iio/resolver/ad2s1210.c b/drivers/staging/iio/resolver/ad2s1210.c index ed404355ea4c..a00693c61870 100644 --- a/drivers/staging/iio/resolver/ad2s1210.c +++ b/drivers/staging/iio/resolver/ad2s1210.c @@ -101,7 +101,7 @@ struct ad2s1210_state { static const int ad2s1210_mode_vals[4][2] = { [MOD_POS] = { 0, 0 }, [MOD_VEL] = { 0, 1 }, - [MOD_CONFIG] = { 1, 0 }, + [MOD_CONFIG] = { 1, 1 }, }; static inline void ad2s1210_set_mode(enum ad2s1210_mode mode, From 3c5a28658d129e930fa7778cc27498a70726cf96 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 11 Feb 2020 19:18:55 +0100 Subject: [PATCH 013/755] debugfs: regset32: Add Runtime PM support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 30332eeefec8f83afcea00c360f99ef64b87f220 upstream. Hardware registers of devices under control of power management cannot be accessed at all times. If such a device is suspended, register accesses may lead to undefined behavior, like reading bogus values, or causing exceptions or system lock-ups. Extend struct debugfs_regset32 with an optional field to let device drivers specify the device the registers in the set belong to. This allows debugfs_show_regset32() to make sure the device is resumed while its registers are being read. Signed-off-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Reviewed-by: Greg Kroah-Hartman Acked-by: Rafael J. Wysocki Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman --- fs/debugfs/file.c | 8 ++++++++ include/linux/debugfs.h | 1 + 2 files changed, 9 insertions(+) diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index 9efc243e991a..3547388ad60b 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -1119,7 +1120,14 @@ static int debugfs_show_regset32(struct seq_file *s, void *data) { struct debugfs_regset32 *regset = s->private; + if (regset->dev) + pm_runtime_get_sync(regset->dev); + debugfs_print_regs32(s, regset->regs, regset->nregs, regset->base, ""); + + if (regset->dev) + pm_runtime_put(regset->dev); + return 0; } diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index d0238d3b2f31..8565c8842cde 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -35,6 +35,7 @@ struct debugfs_regset32 { const struct debugfs_reg32 *regs; int nregs; void __iomem *base; + struct device *dev; /* Optional device for Runtime PM */ }; extern struct dentry *arch_debugfs_dir; From 3092933b2637f9877a965312969f8ac3a8fe227b Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 5 Apr 2023 11:03:42 +0200 Subject: [PATCH 014/755] xhci: fix debugfs register accesses while suspended commit 735baf1b23458f71a8b15cb924af22c9ff9cd125 upstream. Wire up the debugfs regset device pointer so that the controller is resumed before accessing registers to avoid crashing or locking up if it happens to be runtime suspended. Fixes: 02b6fdc2a153 ("usb: xhci: Add debugfs interface for xHCI driver") Cc: stable@vger.kernel.org # 4.15: 30332eeefec8: debugfs: regset32: Add Runtime PM support Cc: stable@vger.kernel.org # 4.15 Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20230405090342.7363-1-johan+linaro@kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-debugfs.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/host/xhci-debugfs.c b/drivers/usb/host/xhci-debugfs.c index f5c8e4eb62ae..dc332f5800ad 100644 --- a/drivers/usb/host/xhci-debugfs.c +++ b/drivers/usb/host/xhci-debugfs.c @@ -132,6 +132,7 @@ static void xhci_debugfs_regset(struct xhci_hcd *xhci, u32 base, regset->regs = regs; regset->nregs = nregs; regset->base = hcd->regs + base; + regset->dev = hcd->self.controller; debugfs_create_regset32((const char *)rgs->name, 0444, parent, regset); } From 0f91290774c798199ba4b8df93de5c3156b5163d Mon Sep 17 00:00:00 2001 From: Jiaxun Yang Date: Tue, 11 Apr 2023 12:14:26 +0100 Subject: [PATCH 015/755] MIPS: fw: Allow firmware to pass a empty env commit ee1809ed7bc456a72dc8410b475b73021a3a68d5 upstream. fw_getenv will use env entry to determine style of env, however it is legal for firmware to just pass a empty list. Check if first entry exist before running strchr to avoid null pointer dereference. Cc: stable@vger.kernel.org Link: https://github.com/clbr/n64bootloader/issues/5 Signed-off-by: Jiaxun Yang Signed-off-by: Thomas Bogendoerfer Signed-off-by: Greg Kroah-Hartman --- arch/mips/fw/lib/cmdline.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/fw/lib/cmdline.c b/arch/mips/fw/lib/cmdline.c index 6ecda64ad184..ed88abc40513 100644 --- a/arch/mips/fw/lib/cmdline.c +++ b/arch/mips/fw/lib/cmdline.c @@ -51,7 +51,7 @@ char *fw_getenv(char *envname) { char *result = NULL; - if (_fw_envp != NULL) { + if (_fw_envp != NULL && fw_envp(0) != NULL) { /* * Return a pointer to the given environment variable. * YAMON uses "name", "value" pairs, while U-Boot uses From bead854bcca2e36ebc27f7dd8a04f4526212ed17 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 4 Apr 2023 12:09:14 +0000 Subject: [PATCH 016/755] ipmi:ssif: Add send_retries increment commit 6ce7995a43febe693d4894033c6e29314970646a upstream. A recent change removed an increment of send_retries, re-add it. Fixes: 95767ed78a18 ipmi:ssif: resend_msg() cannot fail Reported-by: Pavel Machek Cc: stable@vger.kernel.org Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman --- drivers/char/ipmi/ipmi_ssif.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index d5f068a10a5a..e0c475c94110 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -562,8 +562,10 @@ static void retry_timeout(struct timer_list *t) if (waiting) start_get(ssif_info); - if (resend) + if (resend) { start_resend(ssif_info); + ssif_inc_stat(ssif_info, send_retries); + } } static void watch_timeout(struct timer_list *t) From 4ec3be7003b67faf53c18200d08628f33b47e2d4 Mon Sep 17 00:00:00 2001 From: Zhang Yuchen Date: Wed, 12 Apr 2023 15:49:07 +0800 Subject: [PATCH 017/755] ipmi: fix SSIF not responding under certain cond. commit 6d2555cde2918409b0331560e66f84a0ad4849c6 upstream. The ipmi communication is not restored after a specific version of BMC is upgraded on our server. The ipmi driver does not respond after printing the following log: ipmi_ssif: Invalid response getting flags: 1c 1 I found that after entering this branch, ssif_info->ssif_state always holds SSIF_GETTING_FLAGS and never return to IDLE. As a result, the driver cannot be loaded, because the driver status is checked during the unload process and must be IDLE in shutdown_ssif(): while (ssif_info->ssif_state != SSIF_IDLE) schedule_timeout(1); The process trigger this problem is: 1. One msg timeout and next msg start send, and call ssif_set_need_watch(). 2. ssif_set_need_watch()->watch_timeout()->start_flag_fetch() change ssif_state to SSIF_GETTING_FLAGS. 3. In msg_done_handler() ssif_state == SSIF_GETTING_FLAGS, if an error message is received, the second branch does not modify the ssif_state. 4. All retry action need IS_SSIF_IDLE() == True. Include retry action in watch_timeout(), msg_done_handler(). Sending msg does not work either. SSIF_IDLE is also checked in start_next_msg(). 5. The only thing that can be triggered in the SSIF driver is watch_timeout(), after destory_user(), this timer will stop too. So, if enter this branch, the ssif_state will remain SSIF_GETTING_FLAGS and can't send msg, no timer started, can't unload. We did a comparative test before and after adding this patch, and the result is effective. Fixes: 259307074bfc ("ipmi: Add SMBus interface driver (SSIF)") Cc: stable@vger.kernel.org Signed-off-by: Zhang Yuchen Message-Id: <20230412074907.80046-1-zhangyuchen.lcr@bytedance.com> Signed-off-by: Corey Minyard Signed-off-by: Greg Kroah-Hartman --- drivers/char/ipmi/ipmi_ssif.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index e0c475c94110..2907b0bca1af 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -791,9 +791,9 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, } else if (data[0] != (IPMI_NETFN_APP_REQUEST | 1) << 2 || data[1] != IPMI_GET_MSG_FLAGS_CMD) { /* - * Don't abort here, maybe it was a queued - * response to a previous command. + * Recv error response, give up. */ + ssif_info->ssif_state = SSIF_IDLE; ipmi_ssif_unlock_cond(ssif_info, flags); dev_warn(&ssif_info->client->dev, "Invalid response getting flags: %x %x\n", From 719459877d58c8aced5845c1e5b98d8d87d09197 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Thu, 2 Mar 2023 14:49:50 -0800 Subject: [PATCH 018/755] kheaders: Use array declaration instead of char commit b69edab47f1da8edd8e7bfdf8c70f51a2a5d89fb upstream. Under CONFIG_FORTIFY_SOURCE, memcpy() will check the size of destination and source buffers. Defining kernel_headers_data as "char" would trip this check. Since these addresses are treated as byte arrays, define them as arrays (as done everywhere else). This was seen with: $ cat /sys/kernel/kheaders.tar.xz >> /dev/null detected buffer overflow in memcpy kernel BUG at lib/string_helpers.c:1027! ... RIP: 0010:fortify_panic+0xf/0x20 [...] Call Trace: ikheaders_read+0x45/0x50 [kheaders] kernfs_fop_read_iter+0x1a4/0x2f0 ... Reported-by: Jakub Kicinski Link: https://lore.kernel.org/bpf/20230302112130.6e402a98@kernel.org/ Acked-by: Joel Fernandes (Google) Reviewed-by: Alexander Lobakin Tested-by: Jakub Kicinski Fixes: 43d8ce9d65a5 ("Provide in-kernel headers to make extending kernel easier") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20230302224946.never.243-kees@kernel.org Signed-off-by: Greg Kroah-Hartman --- kernel/kheaders.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/kernel/kheaders.c b/kernel/kheaders.c index 8f69772af77b..42163c9e94e5 100644 --- a/kernel/kheaders.c +++ b/kernel/kheaders.c @@ -26,15 +26,15 @@ asm ( " .popsection \n" ); -extern char kernel_headers_data; -extern char kernel_headers_data_end; +extern char kernel_headers_data[]; +extern char kernel_headers_data_end[]; static ssize_t ikheaders_read(struct file *file, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t len) { - memcpy(buf, &kernel_headers_data + off, len); + memcpy(buf, &kernel_headers_data[off], len); return len; } @@ -48,8 +48,8 @@ static struct bin_attribute kheaders_attr __ro_after_init = { static int __init ikheaders_init(void) { - kheaders_attr.size = (&kernel_headers_data_end - - &kernel_headers_data); + kheaders_attr.size = (kernel_headers_data_end - + kernel_headers_data); return sysfs_create_bin_file(kernel_kobj, &kheaders_attr); } From a3e0d3430f33d3290b3e320e86ca237e60330d20 Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Sun, 9 Apr 2023 17:15:52 +0200 Subject: [PATCH 019/755] pwm: meson: Fix axg ao mux parents commit eb411c0cf59ae6344b34bc6f0d298a22b300627e upstream. This fix is basically the same as 9bce02ef0dfa ("pwm: meson: Fix the G12A AO clock parents order"). Vendor driver referenced there has xtal as first parent also for axg ao. In addition fix the name of the aoclk81 clock. Apparently name aoclk81 as used by the vendor driver was changed when mainlining the axg clock driver. Fixes: bccaa3f917c9 ("pwm: meson: Add clock source configuration for Meson-AXG") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Reviewed-by: Martin Blumenstingl Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman --- drivers/pwm/pwm-meson.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index 3c81858a8261..1d4fd55aae3e 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -424,7 +424,7 @@ static const struct meson_pwm_data pwm_axg_ee_data = { }; static const char * const pwm_axg_ao_parent_names[] = { - "aoclk81", "xtal", "fclk_div4", "fclk_div5" + "xtal", "axg_ao_clk81", "fclk_div4", "fclk_div5" }; static const struct meson_pwm_data pwm_axg_ao_data = { From a7fa8c9dc8518fad7c85843a63b4054fdf972b9c Mon Sep 17 00:00:00 2001 From: Heiner Kallweit Date: Tue, 11 Apr 2023 07:34:11 +0200 Subject: [PATCH 020/755] pwm: meson: Fix g12a ao clk81 name commit 9e4fa80ab7ef9eb4f7b1ea9fc31e0eb040e85e25 upstream. Fix the name of the aoclk81 clock. Apparently name aoclk81 as used by the vendor driver was changed when mainlining the g12a clock driver. Fixes: f41efceb46e6 ("pwm: meson: Add clock source configuration for Meson G12A") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit Reviewed-by: Martin Blumenstingl Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman --- drivers/pwm/pwm-meson.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/pwm/pwm-meson.c b/drivers/pwm/pwm-meson.c index 1d4fd55aae3e..9fc08d1de34c 100644 --- a/drivers/pwm/pwm-meson.c +++ b/drivers/pwm/pwm-meson.c @@ -433,7 +433,7 @@ static const struct meson_pwm_data pwm_axg_ao_data = { }; static const char * const pwm_g12a_ao_ab_parent_names[] = { - "xtal", "aoclk81", "fclk_div4", "fclk_div5" + "xtal", "g12a_ao_clk81", "fclk_div4", "fclk_div5" }; static const struct meson_pwm_data pwm_g12a_ao_ab_data = { @@ -442,7 +442,7 @@ static const struct meson_pwm_data pwm_g12a_ao_ab_data = { }; static const char * const pwm_g12a_ao_cd_parent_names[] = { - "xtal", "aoclk81", + "xtal", "g12a_ao_clk81", }; static const struct meson_pwm_data pwm_g12a_ao_cd_data = { From 2399b1fda025e939b6fb1ac94505bcf718534e65 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Apr 2023 17:59:20 +0200 Subject: [PATCH 021/755] ring-buffer: Sync IRQ works before buffer destruction commit 675751bb20634f981498c7d66161584080cc061e upstream. If something was written to the buffer just before destruction, it may be possible (maybe not in a real system, but it did happen in ARCH=um with time-travel) to destroy the ringbuffer before the IRQ work ran, leading this KASAN report (or a crash without KASAN): BUG: KASAN: slab-use-after-free in irq_work_run_list+0x11a/0x13a Read of size 8 at addr 000000006d640a48 by task swapper/0 CPU: 0 PID: 0 Comm: swapper Tainted: G W O 6.3.0-rc1 #7 Stack: 60c4f20f 0c203d48 41b58ab3 60f224fc 600477fa 60f35687 60c4f20f 601273dd 00000008 6101eb00 6101eab0 615be548 Call Trace: [<60047a58>] show_stack+0x25e/0x282 [<60c609e0>] dump_stack_lvl+0x96/0xfd [<60c50d4c>] print_report+0x1a7/0x5a8 [<603078d3>] kasan_report+0xc1/0xe9 [<60308950>] __asan_report_load8_noabort+0x1b/0x1d [<60232844>] irq_work_run_list+0x11a/0x13a [<602328b4>] irq_work_tick+0x24/0x34 [<6017f9dc>] update_process_times+0x162/0x196 [<6019f335>] tick_sched_handle+0x1a4/0x1c3 [<6019fd9e>] tick_sched_timer+0x79/0x10c [<601812b9>] __hrtimer_run_queues.constprop.0+0x425/0x695 [<60182913>] hrtimer_interrupt+0x16c/0x2c4 [<600486a3>] um_timer+0x164/0x183 [...] Allocated by task 411: save_stack_trace+0x99/0xb5 stack_trace_save+0x81/0x9b kasan_save_stack+0x2d/0x54 kasan_set_track+0x34/0x3e kasan_save_alloc_info+0x25/0x28 ____kasan_kmalloc+0x8b/0x97 __kasan_kmalloc+0x10/0x12 __kmalloc+0xb2/0xe8 load_elf_phdrs+0xee/0x182 [...] The buggy address belongs to the object at 000000006d640800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 584 bytes inside of freed 1024-byte region [000000006d640800, 000000006d640c00) Add the appropriate irq_work_sync() so the work finishes before the buffers are destroyed. Prior to the commit in the Fixes tag below, there was only a single global IRQ work, so this issue didn't exist. Link: https://lore.kernel.org/linux-trace-kernel/20230427175920.a76159263122.I8295e405c44362a86c995e9c2c37e3e03810aa56@changeid Cc: stable@vger.kernel.org Cc: Masami Hiramatsu Fixes: 15693458c4bc ("tracing/ring-buffer: Move poll wake ups into ring buffer code") Signed-off-by: Johannes Berg Signed-off-by: Steven Rostedt (Google) Signed-off-by: Greg Kroah-Hartman --- kernel/trace/ring_buffer.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 869eeba2005a..43f452b5deff 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -1393,6 +1393,8 @@ static void rb_free_cpu_buffer(struct ring_buffer_per_cpu *cpu_buffer) struct list_head *head = cpu_buffer->pages; struct buffer_page *bpage, *tmp; + irq_work_sync(&cpu_buffer->irq_work.work); + free_buffer_page(cpu_buffer->reader_page); if (head) { @@ -1498,6 +1500,8 @@ ring_buffer_free(struct ring_buffer *buffer) cpuhp_state_remove_instance(CPUHP_TRACE_RB_PREPARE, &buffer->node); + irq_work_sync(&buffer->irq_work.work); + for_each_buffer_cpu(buffer, cpu) rb_free_cpu_buffer(buffer->buffers[cpu]); From 67d33b8c5696718feaad3c90d79f8a68bd1a9fc5 Mon Sep 17 00:00:00 2001 From: Roberto Sassu Date: Fri, 31 Mar 2023 14:32:18 +0200 Subject: [PATCH 022/755] reiserfs: Add security prefix to xattr name in reiserfs_security_write() commit d82dcd9e21b77d338dc4875f3d4111f0db314a7c upstream. Reiserfs sets a security xattr at inode creation time in two stages: first, it calls reiserfs_security_init() to obtain the xattr from active LSMs; then, it calls reiserfs_security_write() to actually write that xattr. Unfortunately, it seems there is a wrong expectation that LSMs provide the full xattr name in the form 'security.'. However, LSMs always provided just the suffix, causing reiserfs to not write the xattr at all (if the suffix is shorter than the prefix), or to write an xattr with the wrong name. Add a temporary buffer in reiserfs_security_write(), and write to it the full xattr name, before passing it to reiserfs_xattr_set_handle(). Also replace the name length check with a check that the full xattr name is not larger than XATTR_NAME_MAX. Cc: stable@vger.kernel.org # v2.6.x Fixes: 57fe60df6241 ("reiserfs: add atomic addition of selinux attributes during inode creation") Signed-off-by: Roberto Sassu Signed-off-by: Paul Moore Signed-off-by: Greg Kroah-Hartman --- fs/reiserfs/xattr_security.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/fs/reiserfs/xattr_security.c b/fs/reiserfs/xattr_security.c index 59d87f9f72fb..159af6c26f4b 100644 --- a/fs/reiserfs/xattr_security.c +++ b/fs/reiserfs/xattr_security.c @@ -81,11 +81,15 @@ int reiserfs_security_write(struct reiserfs_transaction_handle *th, struct inode *inode, struct reiserfs_security_handle *sec) { + char xattr_name[XATTR_NAME_MAX + 1] = XATTR_SECURITY_PREFIX; int error; - if (strlen(sec->name) < sizeof(XATTR_SECURITY_PREFIX)) + + if (XATTR_SECURITY_PREFIX_LEN + strlen(sec->name) > XATTR_NAME_MAX) return -EINVAL; - error = reiserfs_xattr_set_handle(th, inode, sec->name, sec->value, + strlcat(xattr_name, sec->name, sizeof(xattr_name)); + + error = reiserfs_xattr_set_handle(th, inode, xattr_name, sec->value, sec->length, XATTR_CREATE); if (error == -ENODATA || error == -EOPNOTSUPP) error = 0; From d482617fa66210dfefe69e6fb8bff7cc100cab91 Mon Sep 17 00:00:00 2001 From: Sean Christopherson Date: Tue, 4 Apr 2023 17:23:59 -0700 Subject: [PATCH 023/755] KVM: nVMX: Emulate NOPs in L2, and PAUSE if it's not intercepted commit 4984563823f0034d3533854c1b50e729f5191089 upstream. Extend VMX's nested intercept logic for emulated instructions to handle "pause" interception, in quotes because KVM's emulator doesn't filter out NOPs when checking for nested intercepts. Failure to allow emulation of NOPs results in KVM injecting a #UD into L2 on any NOP that collides with the emulator's definition of PAUSE, i.e. on all single-byte NOPs. For PAUSE itself, honor L1's PAUSE-exiting control, but ignore PLE to avoid unnecessarily injecting a #UD into L2. Per the SDM, the first execution of PAUSE after VM-Entry is treated as the beginning of a new loop, i.e. will never trigger a PLE VM-Exit, and so L1 can't expect any given execution of PAUSE to deterministically exit. ... the processor considers this execution to be the first execution of PAUSE in a loop. (It also does so for the first execution of PAUSE at CPL 0 after VM entry.) All that said, the PLE side of things is currently a moot point, as KVM doesn't expose PLE to L1. Note, vmx_check_intercept() is still wildly broken when L1 wants to intercept an instruction, as KVM injects a #UD instead of synthesizing a nested VM-Exit. That issue extends far beyond NOP/PAUSE and needs far more effort to fix, i.e. is a problem for the future. Fixes: 07721feee46b ("KVM: nVMX: Don't emulate instructions in guest mode") Cc: Mathias Krause Cc: stable@vger.kernel.org Reviewed-by: Paolo Bonzini Link: https://lore.kernel.org/r/20230405002359.418138-1-seanjc@google.com Signed-off-by: Sean Christopherson Signed-off-by: Greg Kroah-Hartman --- arch/x86/kvm/vmx/vmx.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index e6dd6a7e8689..9bd08d264603 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -7266,6 +7266,21 @@ static int vmx_check_intercept(struct kvm_vcpu *vcpu, /* FIXME: produce nested vmexit and return X86EMUL_INTERCEPTED. */ break; + case x86_intercept_pause: + /* + * PAUSE is a single-byte NOP with a REPE prefix, i.e. collides + * with vanilla NOPs in the emulator. Apply the interception + * check only to actual PAUSE instructions. Don't check + * PAUSE-loop-exiting, software can't expect a given PAUSE to + * exit, i.e. KVM is within its rights to allow L2 to execute + * the PAUSE. + */ + if ((info->rep_prefix != REPE_PREFIX) || + !nested_cpu_has2(vmcs12, CPU_BASED_PAUSE_EXITING)) + return X86EMUL_CONTINUE; + + break; + /* TODO: check more intercepts... */ default: break; From 5d1f14beababd3b33cad0f74112163de449a9c37 Mon Sep 17 00:00:00 2001 From: Reid Tonking Date: Wed, 26 Apr 2023 14:49:56 -0500 Subject: [PATCH 024/755] i2c: omap: Fix standard mode false ACK readings commit c770657bd2611b077ec1e7b1fe6aa92f249399bd upstream. Using standard mode, rare false ACK responses were appearing with i2cdetect tool. This was happening due to NACK interrupt triggering ISR thread before register access interrupt was ready. Removing the NACK interrupt's ability to trigger ISR thread lets register access ready interrupt do this instead. Cc: # v3.7+ Fixes: 3b2f8f82dad7 ("i2c: omap: switch to threaded IRQ support") Signed-off-by: Reid Tonking Acked-by: Vignesh Raghavendra Reviewed-by: Tony Lindgren Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index c36522849325..a788f2e70677 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1058,7 +1058,7 @@ omap_i2c_isr(int irq, void *dev_id) u16 stat; stat = omap_i2c_read_reg(omap, OMAP_I2C_STAT_REG); - mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG); + mask = omap_i2c_read_reg(omap, OMAP_I2C_IE_REG) & ~OMAP_I2C_STAT_NACK; if (stat & mask) ret = IRQ_WAKE_THREAD; From 2c2a76b7c4b5f33ecfa4e4db7b17fa05e2b47eee Mon Sep 17 00:00:00 2001 From: Zhihao Cheng Date: Wed, 1 Mar 2023 20:29:18 +0800 Subject: [PATCH 025/755] Revert "ubifs: dirty_cow_znode: Fix memleak in error handling path" commit 7d01cb27f6aebc54efbe28d8961a973b8f795b13 upstream. This reverts commit 122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak in error handling path). After commit 122deabfe1428 applied, if insert_old_idx() failed, old index neither exists in TNC nor in old-index tree. Which means that old index node could be overwritten in layout_leb_in_gaps(), then ubifs image will be corrupted in power-cut. Fixes: 122deabfe1428 (ubifs: dirty_cow_znode: Fix memleak ... path) Cc: stable@vger.kernel.org Signed-off-by: Zhihao Cheng Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman --- fs/ubifs/tnc.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c index 6461f61449b1..b162561ca9c3 100644 --- a/fs/ubifs/tnc.c +++ b/fs/ubifs/tnc.c @@ -267,18 +267,11 @@ static struct ubifs_znode *dirty_cow_znode(struct ubifs_info *c, if (zbr->len) { err = insert_old_idx(c, zbr->lnum, zbr->offs); if (unlikely(err)) - /* - * Obsolete znodes will be freed by tnc_destroy_cnext() - * or free_obsolete_znodes(), copied up znodes should - * be added back to tnc and freed by - * ubifs_destroy_tnc_subtree(). - */ - goto out; + return ERR_PTR(err); err = add_idx_dirt(c, zbr->lnum, zbr->len); } else err = 0; -out: zbr->znode = zn; zbr->lnum = 0; zbr->offs = 0; From 6f2eee5457bc48b0426dedfd78cdbdea241a6edb Mon Sep 17 00:00:00 2001 From: Zhihao Cheng Date: Wed, 1 Mar 2023 20:29:19 +0800 Subject: [PATCH 026/755] ubifs: Fix memleak when insert_old_idx() failed commit b5fda08ef213352ac2df7447611eb4d383cce929 upstream. Following process will cause a memleak for copied up znode: dirty_cow_znode zn = copy_znode(c, znode); err = insert_old_idx(c, zbr->lnum, zbr->offs); if (unlikely(err)) return ERR_PTR(err); // No one refers to zn. Fetch a reproducer in [Link]. Function copy_znode() is split into 2 parts: resource allocation and znode replacement, insert_old_idx() is split in similar way, so resource cleanup could be done in error handling path without corrupting metadata(mem & disk). It's okay that old index inserting is put behind of add_idx_dirt(), old index is used in layout_leb_in_gaps(), so the two processes do not depend on each other. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216705 Fixes: 1e51764a3c2a ("UBIFS: add new flash file system") Cc: stable@vger.kernel.org Signed-off-by: Zhihao Cheng Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman --- fs/ubifs/tnc.c | 137 +++++++++++++++++++++++++++++++------------------ 1 file changed, 87 insertions(+), 50 deletions(-) diff --git a/fs/ubifs/tnc.c b/fs/ubifs/tnc.c index b162561ca9c3..91543e3b5b3f 100644 --- a/fs/ubifs/tnc.c +++ b/fs/ubifs/tnc.c @@ -44,6 +44,33 @@ enum { NOT_ON_MEDIA = 3, }; +static void do_insert_old_idx(struct ubifs_info *c, + struct ubifs_old_idx *old_idx) +{ + struct ubifs_old_idx *o; + struct rb_node **p, *parent = NULL; + + p = &c->old_idx.rb_node; + while (*p) { + parent = *p; + o = rb_entry(parent, struct ubifs_old_idx, rb); + if (old_idx->lnum < o->lnum) + p = &(*p)->rb_left; + else if (old_idx->lnum > o->lnum) + p = &(*p)->rb_right; + else if (old_idx->offs < o->offs) + p = &(*p)->rb_left; + else if (old_idx->offs > o->offs) + p = &(*p)->rb_right; + else { + ubifs_err(c, "old idx added twice!"); + kfree(old_idx); + } + } + rb_link_node(&old_idx->rb, parent, p); + rb_insert_color(&old_idx->rb, &c->old_idx); +} + /** * insert_old_idx - record an index node obsoleted since the last commit start. * @c: UBIFS file-system description object @@ -69,35 +96,15 @@ enum { */ static int insert_old_idx(struct ubifs_info *c, int lnum, int offs) { - struct ubifs_old_idx *old_idx, *o; - struct rb_node **p, *parent = NULL; + struct ubifs_old_idx *old_idx; old_idx = kmalloc(sizeof(struct ubifs_old_idx), GFP_NOFS); if (unlikely(!old_idx)) return -ENOMEM; old_idx->lnum = lnum; old_idx->offs = offs; + do_insert_old_idx(c, old_idx); - p = &c->old_idx.rb_node; - while (*p) { - parent = *p; - o = rb_entry(parent, struct ubifs_old_idx, rb); - if (lnum < o->lnum) - p = &(*p)->rb_left; - else if (lnum > o->lnum) - p = &(*p)->rb_right; - else if (offs < o->offs) - p = &(*p)->rb_left; - else if (offs > o->offs) - p = &(*p)->rb_right; - else { - ubifs_err(c, "old idx added twice!"); - kfree(old_idx); - return 0; - } - } - rb_link_node(&old_idx->rb, parent, p); - rb_insert_color(&old_idx->rb, &c->old_idx); return 0; } @@ -199,23 +206,6 @@ static struct ubifs_znode *copy_znode(struct ubifs_info *c, __set_bit(DIRTY_ZNODE, &zn->flags); __clear_bit(COW_ZNODE, &zn->flags); - ubifs_assert(c, !ubifs_zn_obsolete(znode)); - __set_bit(OBSOLETE_ZNODE, &znode->flags); - - if (znode->level != 0) { - int i; - const int n = zn->child_cnt; - - /* The children now have new parent */ - for (i = 0; i < n; i++) { - struct ubifs_zbranch *zbr = &zn->zbranch[i]; - - if (zbr->znode) - zbr->znode->parent = zn; - } - } - - atomic_long_inc(&c->dirty_zn_cnt); return zn; } @@ -233,6 +223,42 @@ static int add_idx_dirt(struct ubifs_info *c, int lnum, int dirt) return ubifs_add_dirt(c, lnum, dirt); } +/** + * replace_znode - replace old znode with new znode. + * @c: UBIFS file-system description object + * @new_zn: new znode + * @old_zn: old znode + * @zbr: the branch of parent znode + * + * Replace old znode with new znode in TNC. + */ +static void replace_znode(struct ubifs_info *c, struct ubifs_znode *new_zn, + struct ubifs_znode *old_zn, struct ubifs_zbranch *zbr) +{ + ubifs_assert(c, !ubifs_zn_obsolete(old_zn)); + __set_bit(OBSOLETE_ZNODE, &old_zn->flags); + + if (old_zn->level != 0) { + int i; + const int n = new_zn->child_cnt; + + /* The children now have new parent */ + for (i = 0; i < n; i++) { + struct ubifs_zbranch *child = &new_zn->zbranch[i]; + + if (child->znode) + child->znode->parent = new_zn; + } + } + + zbr->znode = new_zn; + zbr->lnum = 0; + zbr->offs = 0; + zbr->len = 0; + + atomic_long_inc(&c->dirty_zn_cnt); +} + /** * dirty_cow_znode - ensure a znode is not being committed. * @c: UBIFS file-system description object @@ -265,21 +291,32 @@ static struct ubifs_znode *dirty_cow_znode(struct ubifs_info *c, return zn; if (zbr->len) { - err = insert_old_idx(c, zbr->lnum, zbr->offs); - if (unlikely(err)) - return ERR_PTR(err); + struct ubifs_old_idx *old_idx; + + old_idx = kmalloc(sizeof(struct ubifs_old_idx), GFP_NOFS); + if (unlikely(!old_idx)) { + err = -ENOMEM; + goto out; + } + old_idx->lnum = zbr->lnum; + old_idx->offs = zbr->offs; + err = add_idx_dirt(c, zbr->lnum, zbr->len); - } else - err = 0; + if (err) { + kfree(old_idx); + goto out; + } - zbr->znode = zn; - zbr->lnum = 0; - zbr->offs = 0; - zbr->len = 0; + do_insert_old_idx(c, old_idx); + } + + replace_znode(c, zn, znode, zbr); - if (unlikely(err)) - return ERR_PTR(err); return zn; + +out: + kfree(zn); + return ERR_PTR(err); } /** From d3f1b113a50375f7e1d924ec9490d5a455e3a86e Mon Sep 17 00:00:00 2001 From: Wang YanQing Date: Tue, 28 Mar 2023 23:35:34 +0800 Subject: [PATCH 027/755] ubi: Fix return value overwrite issue in try_write_vid_and_data() commit 31a149d5c13c4cbcf97de3435817263a2d8c9d6e upstream. The commit 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code") adds helper function, try_write_vid_and_data(), to simplify the code, but this helper function has bug, it will return 0 (success) when ubi_io_write_vid_hdr() or the ubi_io_write_data() return error number (-EIO, etc), because the return value of ubi_wl_put_peb() will overwrite the original return value. This issue will cause unexpected data loss issue, because the caller of this function and UBIFS willn't know the data is lost. Fixes: 2d78aee426d8 ("UBI: simplify LEB write and atomic LEB change code") Cc: stable@vger.kernel.org Signed-off-by: Wang YanQing Reviewed-by: Zhihao Cheng Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman --- drivers/mtd/ubi/eba.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/ubi/eba.c b/drivers/mtd/ubi/eba.c index 5133e1be5331..3243bca19b8b 100644 --- a/drivers/mtd/ubi/eba.c +++ b/drivers/mtd/ubi/eba.c @@ -947,7 +947,7 @@ static int try_write_vid_and_data(struct ubi_volume *vol, int lnum, int offset, int len) { struct ubi_device *ubi = vol->ubi; - int pnum, opnum, err, vol_id = vol->vol_id; + int pnum, opnum, err, err2, vol_id = vol->vol_id; pnum = ubi_wl_get_peb(ubi); if (pnum < 0) { @@ -982,10 +982,19 @@ static int try_write_vid_and_data(struct ubi_volume *vol, int lnum, out_put: up_read(&ubi->fm_eba_sem); - if (err && pnum >= 0) - err = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1); - else if (!err && opnum >= 0) - err = ubi_wl_put_peb(ubi, vol_id, lnum, opnum, 0); + if (err && pnum >= 0) { + err2 = ubi_wl_put_peb(ubi, vol_id, lnum, pnum, 1); + if (err2) { + ubi_warn(ubi, "failed to return physical eraseblock %d, error %d", + pnum, err2); + } + } else if (!err && opnum >= 0) { + err2 = ubi_wl_put_peb(ubi, vol_id, lnum, opnum, 0); + if (err2) { + ubi_warn(ubi, "failed to return physical eraseblock %d, error %d", + opnum, err2); + } + } return err; } From 823f554747f8aafaa965fb2f3ae794110ed429ef Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?M=C3=A5rten=20Lindahl?= Date: Thu, 30 Mar 2023 11:32:14 +0200 Subject: [PATCH 028/755] ubifs: Free memory for tmpfile name MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 1fb815b38bb31d6af9bd0540b8652a0d6fe6cfd3 upstream. When opening a ubifs tmpfile on an encrypted directory, function fscrypt_setup_filename allocates memory for the name that is to be stored in the directory entry, but after the name has been copied to the directory entry inode, the memory is not freed. When running kmemleak on it we see that it is registered as a leak. The report below is triggered by a simple program 'tmpfile' just opening a tmpfile: unreferenced object 0xffff88810178f380 (size 32): comm "tmpfile", pid 509, jiffies 4294934744 (age 1524.742s) backtrace: __kmem_cache_alloc_node __kmalloc fscrypt_setup_filename ubifs_tmpfile vfs_tmpfile path_openat Free this memory after it has been copied to the inode. Signed-off-by: Mårten Lindahl Reviewed-by: Zhihao Cheng Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger Signed-off-by: Greg Kroah-Hartman --- fs/ubifs/dir.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index 332c0b02a0ad..a5294e737909 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -433,6 +433,7 @@ static int do_tmpfile(struct inode *dir, struct dentry *dentry, mutex_unlock(&dir_ui->ui_mutex); ubifs_release_budget(c, &req); + fscrypt_free_filename(&nm); return 0; From 11458692ebd2b99248b0c17b439b4cfde232f2f3 Mon Sep 17 00:00:00 2001 From: Ondrej Mosnacek Date: Wed, 12 Apr 2023 15:59:19 +0200 Subject: [PATCH 029/755] selinux: fix Makefile dependencies of flask.h [ Upstream commit bcab1adeaad4b39a1e04cb98979a367d08253f03 ] Make the flask.h target depend on the genheaders binary instead of classmap.h to ensure that it is rebuilt if any of the dependencies of genheaders are changed. Notably this fixes flask.h not being rebuilt when initial_sid_to_string.h is modified. Fixes: 8753f6bec352 ("selinux: generate flask headers during kernel build") Signed-off-by: Ondrej Mosnacek Acked-by: Stephen Smalley Signed-off-by: Paul Moore Signed-off-by: Sasha Levin --- security/selinux/Makefile | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/security/selinux/Makefile b/security/selinux/Makefile index ccf950409384..c0dfb9f3db69 100644 --- a/security/selinux/Makefile +++ b/security/selinux/Makefile @@ -19,8 +19,8 @@ ccflags-y := -I$(srctree)/security/selinux -I$(srctree)/security/selinux/include $(addprefix $(obj)/,$(selinux-y)): $(obj)/flask.h quiet_cmd_flask = GEN $(obj)/flask.h $(obj)/av_permissions.h - cmd_flask = scripts/selinux/genheaders/genheaders $(obj)/flask.h $(obj)/av_permissions.h + cmd_flask = $< $(obj)/flask.h $(obj)/av_permissions.h targets += flask.h av_permissions.h -$(obj)/flask.h: $(src)/include/classmap.h FORCE +$(obj)/flask.h: scripts/selinux/genheaders/genheaders FORCE $(call if_changed,flask) From 1c131a32a9b596076e231c6dc1f4965d5334281d Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Wed, 12 Apr 2023 13:29:11 -0400 Subject: [PATCH 030/755] selinux: ensure av_permissions.h is built when needed [ Upstream commit 4ce1f694eb5d8ca607fed8542d32a33b4f1217a5 ] The Makefile rule responsible for building flask.h and av_permissions.h only lists flask.h as a target which means that av_permissions.h is only generated when flask.h needs to be generated. This patch fixes this by adding av_permissions.h as a target to the rule. Fixes: 8753f6bec352 ("selinux: generate flask headers during kernel build") Signed-off-by: Paul Moore Signed-off-by: Sasha Levin --- security/selinux/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/security/selinux/Makefile b/security/selinux/Makefile index c0dfb9f3db69..c371634f35a3 100644 --- a/security/selinux/Makefile +++ b/security/selinux/Makefile @@ -22,5 +22,5 @@ quiet_cmd_flask = GEN $(obj)/flask.h $(obj)/av_permissions.h cmd_flask = $< $(obj)/flask.h $(obj)/av_permissions.h targets += flask.h av_permissions.h -$(obj)/flask.h: scripts/selinux/genheaders/genheaders FORCE +$(obj)/flask.h $(obj)/av_permissions.h &: scripts/selinux/genheaders/genheaders FORCE $(call if_changed,flask) From e998107daad21b7881184b26a9ce4bfb5bae2ddb Mon Sep 17 00:00:00 2001 From: Lino Sanfilippo Date: Thu, 24 Nov 2022 14:55:28 +0100 Subject: [PATCH 031/755] tpm, tpm_tis: Do not skip reset of original interrupt vector [ Upstream commit ed9be0e6c892a783800d77a41ca4c7255c6af8c5 ] If in tpm_tis_probe_irq_single() an error occurs after the original interrupt vector has been read, restore the interrupts before the error is returned. Since the caller does not check the error value, return -1 in any case that the TPM_CHIP_FLAG_IRQ flag is not set. Since the return value of function tpm_tis_gen_interrupt() is not longer used, make it a void function. Fixes: 1107d065fdf1 ("tpm_tis: Introduce intermediate layer for TPM access") Signed-off-by: Lino Sanfilippo Tested-by: Jarkko Sakkinen Reviewed-by: Jarkko Sakkinen Signed-off-by: Jarkko Sakkinen Signed-off-by: Sasha Levin --- drivers/char/tpm/tpm_tis_core.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-) diff --git a/drivers/char/tpm/tpm_tis_core.c b/drivers/char/tpm/tpm_tis_core.c index 70f785994228..cb0660304e48 100644 --- a/drivers/char/tpm/tpm_tis_core.c +++ b/drivers/char/tpm/tpm_tis_core.c @@ -613,7 +613,7 @@ static irqreturn_t tis_int_handler(int dummy, void *dev_id) return IRQ_HANDLED; } -static int tpm_tis_gen_interrupt(struct tpm_chip *chip) +static void tpm_tis_gen_interrupt(struct tpm_chip *chip) { const char *desc = "attempting to generate an interrupt"; u32 cap2; @@ -622,7 +622,7 @@ static int tpm_tis_gen_interrupt(struct tpm_chip *chip) ret = request_locality(chip, 0); if (ret < 0) - return ret; + return; if (chip->flags & TPM_CHIP_FLAG_TPM2) ret = tpm2_get_tpm_pt(chip, 0x100, &cap2, desc); @@ -630,8 +630,6 @@ static int tpm_tis_gen_interrupt(struct tpm_chip *chip) ret = tpm1_getcap(chip, TPM_CAP_PROP_TIS_TIMEOUT, &cap, desc, 0); release_locality(chip, 0); - - return ret; } /* Register the IRQ and issue a command that will cause an interrupt. If an @@ -661,42 +659,37 @@ static int tpm_tis_probe_irq_single(struct tpm_chip *chip, u32 intmask, rc = tpm_tis_write8(priv, TPM_INT_VECTOR(priv->locality), irq); if (rc < 0) - return rc; + goto restore_irqs; rc = tpm_tis_read32(priv, TPM_INT_STATUS(priv->locality), &int_status); if (rc < 0) - return rc; + goto restore_irqs; /* Clear all existing */ rc = tpm_tis_write32(priv, TPM_INT_STATUS(priv->locality), int_status); if (rc < 0) - return rc; - + goto restore_irqs; /* Turn on */ rc = tpm_tis_write32(priv, TPM_INT_ENABLE(priv->locality), intmask | TPM_GLOBAL_INT_ENABLE); if (rc < 0) - return rc; + goto restore_irqs; priv->irq_tested = false; /* Generate an interrupt by having the core call through to * tpm_tis_send */ - rc = tpm_tis_gen_interrupt(chip); - if (rc < 0) - return rc; + tpm_tis_gen_interrupt(chip); +restore_irqs: /* tpm_tis_send will either confirm the interrupt is working or it * will call disable_irq which undoes all of the above. */ if (!(chip->flags & TPM_CHIP_FLAG_IRQ)) { - rc = tpm_tis_write8(priv, original_int_vec, - TPM_INT_VECTOR(priv->locality)); - if (rc < 0) - return rc; - - return 1; + tpm_tis_write8(priv, original_int_vec, + TPM_INT_VECTOR(priv->locality)); + return -1; } return 0; From 880c79bdb002b9d5b6940e52c2ad3829c2178207 Mon Sep 17 00:00:00 2001 From: Gao Xiang Date: Tue, 11 Apr 2023 01:37:14 +0800 Subject: [PATCH 032/755] erofs: stop parsing non-compact HEAD index if clusterofs is invalid [ Upstream commit cc4efd3dd2ac9f89143e5d881609747ecff04164 ] Syzbot generated a crafted image [1] with a non-compact HEAD index of clusterofs 33024 while valid numbers should be 0 ~ lclustersize-1, which causes the following unexpected behavior as below: BUG: unable to handle page fault for address: fffff52101a3fff9 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 23ffed067 P4D 23ffed067 PUD 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 4398 Comm: kworker/u5:1 Not tainted 6.3.0-rc6-syzkaller-g09a9639e56c0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 Workqueue: erofs_worker z_erofs_decompressqueue_work RIP: 0010:z_erofs_decompress_queue+0xb7e/0x2b40 ... Call Trace: z_erofs_decompressqueue_work+0x99/0xe0 process_one_work+0x8f6/0x1170 worker_thread+0xa63/0x1210 kthread+0x270/0x300 ret_from_fork+0x1f/0x30 Note that normal images or images using compact indexes are not impacted. Let's fix this now. [1] https://lore.kernel.org/r/000000000000ec75b005ee97fbaa@google.com Reported-and-tested-by: syzbot+aafb3f37cfeb6534c4ac@syzkaller.appspotmail.com Fixes: 02827e1796b3 ("staging: erofs: add erofs_map_blocks_iter") Fixes: 152a333a5895 ("staging: erofs: add compacted compression indexes support") Signed-off-by: Gao Xiang Reviewed-by: Chao Yu Link: https://lore.kernel.org/r/20230410173714.104604-1-hsiangkao@linux.alibaba.com Signed-off-by: Sasha Levin --- fs/erofs/zmap.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/erofs/zmap.c b/fs/erofs/zmap.c index fff574100721..b5ee58fdd82f 100644 --- a/fs/erofs/zmap.c +++ b/fs/erofs/zmap.c @@ -179,6 +179,10 @@ static int vle_legacy_load_cluster_from_disk(struct z_erofs_maprecorder *m, case Z_EROFS_VLE_CLUSTER_TYPE_PLAIN: case Z_EROFS_VLE_CLUSTER_TYPE_HEAD: m->clusterofs = le16_to_cpu(di->di_clusterofs); + if (m->clusterofs >= 1 << vi->z_logical_clusterbits) { + DBG_BUGON(1); + return -EFSCORRUPTED; + } m->pblk = le32_to_cpu(di->di_u.blkaddr); break; default: From 9773c58594ff253631e325f9ddb475fa330941a9 Mon Sep 17 00:00:00 2001 From: Jingbo Xu Date: Fri, 14 Apr 2023 14:18:10 +0800 Subject: [PATCH 033/755] erofs: fix potential overflow calculating xattr_isize [ Upstream commit 1b3567a1969b26f709d82a874498c0754ea841c3 ] Given on-disk i_xattr_icount is 16 bits and xattr_isize is calculated from i_xattr_icount multiplying 4, xattr_isize has a theoretical maximum of 256K (64K * 4). Thus declare xattr_isize as unsigned int to avoid the potential overflow. Fixes: bfb8674dc044 ("staging: erofs: add erofs in-memory stuffs") Signed-off-by: Jingbo Xu Reviewed-by: Gao Xiang Reviewed-by: Chao Yu Link: https://lore.kernel.org/r/20230414061810.6479-1-jefflexu@linux.alibaba.com Signed-off-by: Gao Xiang Signed-off-by: Sasha Levin --- fs/erofs/internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/erofs/internal.h b/fs/erofs/internal.h index 544a453f3076..cc7a42682814 100644 --- a/fs/erofs/internal.h +++ b/fs/erofs/internal.h @@ -226,7 +226,7 @@ struct erofs_inode { unsigned char datalayout; unsigned char inode_isize; - unsigned short xattr_isize; + unsigned int xattr_isize; unsigned int xattr_shared_count; unsigned int *xattr_shared_xattrs; From 8747cd580b59f388e49c89da290f50f20ada4847 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Thu, 19 Jan 2023 15:17:34 -0800 Subject: [PATCH 034/755] drm/rockchip: Drop unbalanced obj unref [ Upstream commit 8ee3b0e85f6ccd9e6c527bc50eaba774c3bb18d0 ] In the error path, rockchip_drm_gem_object_mmap() is dropping an obj reference that it doesn't own. Fixes: 41315b793e13 ("drm/rockchip: use drm_gem_mmap helpers") Signed-off-by: Rob Clark Signed-off-by: Heiko Stuebner Link: https://patchwork.freedesktop.org/patch/msgid/20230119231734.2884543-1-robdclark@gmail.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/rockchip/rockchip_drm_gem.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c index 291e89b4045f..96cc794147b5 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_gem.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_gem.c @@ -249,9 +249,6 @@ static int rockchip_drm_gem_object_mmap(struct drm_gem_object *obj, else ret = rockchip_drm_gem_object_mmap_dma(obj, vma); - if (ret) - drm_gem_vm_close(vma); - return ret; } From 4223f98d4d457278fe15cbf365c2d2c79c1969c1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ma=C3=ADra=20Canal?= Date: Thu, 2 Feb 2023 09:55:17 -0300 Subject: [PATCH 035/755] drm/vgem: add missing mutex_destroy MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 7c18189b14b33c1fbf76480b1bd217877c086e67 ] vgem_fence_open() instantiates a mutex for a particular fence instance, but never destroys it by calling mutex_destroy() in vgem_fence_close(). So, add the missing mutex_destroy() to guarantee proper resource destruction. Fixes: 407779848445 ("drm/vgem: Attach sw fences to exported vGEM dma-buf (ioctl)") Signed-off-by: Maíra Canal Reviewed-by: Stanislaw Gruszka Signed-off-by: Maíra Canal Link: https://patchwork.freedesktop.org/patch/msgid/20230202125517.427976-1-mcanal@igalia.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/vgem/vgem_fence.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/gpu/drm/vgem/vgem_fence.c b/drivers/gpu/drm/vgem/vgem_fence.c index 9268f6fc3f66..92895937aba9 100644 --- a/drivers/gpu/drm/vgem/vgem_fence.c +++ b/drivers/gpu/drm/vgem/vgem_fence.c @@ -249,4 +249,5 @@ void vgem_fence_close(struct vgem_file *vfile) { idr_for_each(&vfile->fence_idr, __vgem_fence_idr_fini, vfile); idr_destroy(&vfile->fence_idr); + mutex_destroy(&vfile->fence_mutex); } From a535b5d4a2c3e5c3311b5ded73b1bac807ce8ede Mon Sep 17 00:00:00 2001 From: Dom Cobley Date: Fri, 27 Jan 2023 16:40:52 +0100 Subject: [PATCH 036/755] drm/probe-helper: Cancel previous job before starting new one [ Upstream commit a8e47884f1906cd7440fafa056adc8817568e73e ] Currently we schedule a call to output_poll_execute from drm_kms_helper_poll_enable for 10s in future. Later we try to replace that in drm_helper_probe_single_connector_modes with a 0s schedule with delayed_event set. But as there is already a job in the queue this fails, and the immediate job we wanted with delayed_event set doesn't occur until 10s later. And that call acts as if connector state has changed, reprobing modes. This has a side effect of waking up a display that has been blanked. Make sure we cancel the old job before submitting the immediate one. Fixes: 162b6a57ac50 ("drm/probe-helper: don't lose hotplug event") Acked-by: Daniel Vetter Signed-off-by: Dom Cobley [Maxime: Switched to mod_delayed_work] Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20230127154052.452524-1-maxime@cerno.tech Signed-off-by: Sasha Levin --- drivers/gpu/drm/drm_probe_helper.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_probe_helper.c b/drivers/gpu/drm/drm_probe_helper.c index d45f43feaf86..4c8bb93a89fb 100644 --- a/drivers/gpu/drm/drm_probe_helper.c +++ b/drivers/gpu/drm/drm_probe_helper.c @@ -460,8 +460,9 @@ retry: */ dev->mode_config.delayed_event = true; if (dev->mode_config.poll_enabled) - schedule_delayed_work(&dev->mode_config.output_poll_work, - 0); + mod_delayed_work(system_wq, + &dev->mode_config.output_poll_work, + 0); } /* Re-enable polling in case the global poll config changed. */ From 0524eb6882976dc31c0b07ce07091fdcfa3c6357 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 16 Feb 2023 16:30:31 +0100 Subject: [PATCH 037/755] arm64: dts: renesas: r8a77990: Remove bogus voltages from OPP table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit fb76b0fae3ca880363214e1dcd6513ab8bd529e7 ] According to the R-Car Series, 3rd Generation Hardware User’s Manual Rev. 2.30, the System CPU cores on R-Car E3 do not have their own power supply, but use the common internal power supply (typical 1.03V). Hence remove the "opp-microvolt" properties from the Operating Performance Points table. They are optional, and unused, when none of the CPU nodes is tied to a regulator using the "cpu-supply" property. Fixes: dd7188eb4ed128dc ("arm64: dts: renesas: r8a77990: Add OPPs table for cpu devices") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/9232578d9d395d529f64db3333a371e31327f459.1676560856.git.geert+renesas@glider.be Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/renesas/r8a77990.dtsi | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi index dabee157119f..82efc8a3627d 100644 --- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi @@ -60,17 +60,14 @@ opp-shared; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; opp-suspend; }; From acb6f45775bbff7786447b1fb8a3c897f6aca071 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 16 Feb 2023 16:30:32 +0100 Subject: [PATCH 038/755] arm64: dts: renesas: r8a774c0: Remove bogus voltages from OPP table MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 554edc3e9239bb81e61be9f0f5dbbeb528a69e72 ] According to the RZ/G Series, 2nd Generation Hardware User’s Manual Rev. 1.11, the System CPU cores on RZ/G2E do not have their own power supply, but use the common internal power supply (typical 1.03V). Hence remove the "opp-microvolt" properties from the Operating Performance Points table. They are optional, and unused, when none of the CPU nodes is tied to a regulator using the "cpu-supply" property. Fixes: 231d8908a66fa98f ("arm64: dts: renesas: r8a774c0: Add OPPs table for cpu devices") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/8348e18a011ded94e35919cd8e17c0be1f9acf2f.1676560856.git.geert+renesas@glider.be Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/renesas/r8a774c0.dtsi | 3 --- 1 file changed, 3 deletions(-) diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi index 73ded80a79ba..1de7891c658c 100644 --- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi @@ -49,17 +49,14 @@ opp-shared; opp-800000000 { opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; }; opp-1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt = <820000>; clock-latency-ns = <300000>; opp-suspend; }; From e0162c92973bf6ac7ab6347d4a6f235d9c2d3956 Mon Sep 17 00:00:00 2001 From: Qiuxu Zhuo Date: Sat, 11 Feb 2023 09:17:28 +0800 Subject: [PATCH 039/755] EDAC/skx: Fix overflows on the DRAM row address mapping arrays [ Upstream commit 71b1e3ba3fed5a34c5fac6d3a15c2634b04c1eb7 ] The current DRAM row address mapping arrays skx_{open,close}_row[] only support ranks with sizes up to 16G. Decoding a rank address to a DRAM row address for a 32G rank by using either one of the above arrays by the skx_edac driver, will result in an overflow on the array. For a 32G rank, the most significant DRAM row address bit (the bit17) is mapped from the bit34 of the rank address. Add this new mapping item to both arrays to fix the overflow issue. Fixes: 4ec656bdf43a ("EDAC, skx_edac: Add EDAC driver for Skylake") Reported-by: Feng Xu Tested-by: Feng Xu Signed-off-by: Qiuxu Zhuo Signed-off-by: Tony Luck Link: https://lore.kernel.org/all/20230211011728.71764-1-qiuxu.zhuo@intel.com Signed-off-by: Sasha Levin --- drivers/edac/skx_base.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/edac/skx_base.c b/drivers/edac/skx_base.c index b1d717cb8df9..f382cc70f9aa 100644 --- a/drivers/edac/skx_base.c +++ b/drivers/edac/skx_base.c @@ -459,7 +459,7 @@ rir_found: } static u8 skx_close_row[] = { - 15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33 + 15, 16, 17, 18, 20, 21, 22, 28, 10, 11, 12, 13, 29, 30, 31, 32, 33, 34 }; static u8 skx_close_column[] = { @@ -467,7 +467,7 @@ static u8 skx_close_column[] = { }; static u8 skx_open_row[] = { - 14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33 + 14, 15, 16, 20, 28, 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33, 34 }; static u8 skx_open_column[] = { From 1d207fcdf6704b8f7cbbaaa3eebeec041f4d7b6b Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Tue, 28 Feb 2023 22:17:51 +0530 Subject: [PATCH 040/755] ARM: dts: qcom: ipq4019: Fix the PCI I/O port range [ Upstream commit 2540279e9a9e74fc880d1e4c83754ecfcbe290a0 ] For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI address (0x40200000) specified in the ranges property for I/O region. While at it, let's use the missing 0x prefix for the addresses. Fixes: 187519403273 ("ARM: dts: ipq4019: Add a few peripheral nodes") Reported-by: Arnd Bergmann Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/ Signed-off-by: Manivannan Sadhasivam Reviewed-by: Arnd Bergmann Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230228164752.55682-16-manivannan.sadhasivam@linaro.org Signed-off-by: Sasha Levin --- arch/arm/boot/dts/qcom-ipq4019.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 338256c59ca5..fc31ee980639 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -393,8 +393,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000>, - <0x82000000 0 0x40300000 0x40300000 0 0x00d00000>; + ranges = <0x81000000 0x0 0x00000000 0x40200000 0x0 0x00100000>, + <0x82000000 0x0 0x40300000 0x40300000 0x0 0x00d00000>; interrupts = ; interrupt-names = "msi"; From 699bf5a793ca51ec39ae53f669d73b4a7385f62d Mon Sep 17 00:00:00 2001 From: Christian Marangi Date: Thu, 7 Jul 2022 03:09:40 +0200 Subject: [PATCH 041/755] ARM: dts: qcom: ipq8064: reduce pci IO size to 64K [ Upstream commit 8fafb7e5c041814876266259e5e439f93571dcef ] The current value for pci IO is problematic for ath10k wifi card commonly connected to ipq8064 SoC. The current value is probably a typo and is actually uncommon to find 1MB IO space even on a x86 arch. Also with recent changes to the pci driver, pci1 and pci2 now fails to function as any connected device fails any reg read/write. Reduce this to 64K as it should be more than enough and 3 * 64K of total IO space doesn't exceed the IO_SPACE_LIMIT hardcoded for the ARM arch. Signed-off-by: Christian Marangi Tested-by: Jonathan McDowell Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20220707010943.20857-7-ansuelsmth@gmail.com Stable-dep-of: 0b16b34e4916 ("ARM: dts: qcom: ipq8064: Fix the PCI I/O port range") Signed-off-by: Sasha Levin --- arch/arm/boot/dts/qcom-ipq8064.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index 16c0da97932c..f2653600f47f 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -451,7 +451,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ interrupts = ; @@ -502,7 +502,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ interrupts = ; @@ -553,7 +553,7 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */ + ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */ 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ interrupts = ; From 1a057b68952dcee144bf4bcaf4abcaf60ee627ec Mon Sep 17 00:00:00 2001 From: Manivannan Sadhasivam Date: Tue, 28 Feb 2023 22:17:52 +0530 Subject: [PATCH 042/755] ARM: dts: qcom: ipq8064: Fix the PCI I/O port range [ Upstream commit 0b16b34e491629016109e56747ad64588074194b ] For 64KiB of the I/O region, the I/O ports of the legacy PCI devices are located in the range of 0x0 to 0x10000. Hence, fix the bogus PCI addresses (0x0fe00000, 0x31e00000, 0x35e00000) specified in the ranges property for I/O region. While at it, let's use the missing 0x prefix for the addresses. Fixes: 93241840b664 ("ARM: dts: qcom: Add pcie nodes for ipq8064") Reported-by: Arnd Bergmann Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/ Signed-off-by: Manivannan Sadhasivam Reviewed-by: Arnd Bergmann Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20230228164752.55682-17-manivannan.sadhasivam@linaro.org Signed-off-by: Sasha Levin --- arch/arm/boot/dts/qcom-ipq8064.dtsi | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi index f2653600f47f..976a8a1fa953 100644 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi @@ -451,8 +451,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x0fe00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x08000000 0x08000000 0x0 0x07e00000>; /* MEM */ interrupts = ; interrupt-names = "msi"; @@ -502,8 +502,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x31e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x2e000000 0x2e000000 0x0 0x03e00000>; /* MEM */ interrupts = ; interrupt-names = "msi"; @@ -553,8 +553,8 @@ #address-cells = <3>; #size-cells = <2>; - ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00010000 /* downstream I/O */ - 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */ + ranges = <0x81000000 0x0 0x00000000 0x35e00000 0x0 0x00010000 /* I/O */ + 0x82000000 0x0 0x32000000 0x32000000 0x0 0x03e00000>; /* MEM */ interrupts = ; interrupt-names = "msi"; From c6a315f0b14074ac89723f55b749a557dda0ae2b Mon Sep 17 00:00:00 2001 From: Jiasheng Jiang Date: Wed, 8 Feb 2023 08:14:42 +0100 Subject: [PATCH 043/755] media: bdisp: Add missing check for create_workqueue [ Upstream commit 2371adeab717d8fe32144a84f3491a03c5838cfb ] Add the check for the return value of the create_workqueue in order to avoid NULL pointer dereference. Fixes: 28ffeebbb7bd ("[media] bdisp: 2D blitter driver using v4l2 mem2mem framework") Signed-off-by: Jiasheng Jiang Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin --- drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c index 16a097f93b42..2485a3657c89 100644 --- a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c +++ b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c @@ -1308,6 +1308,8 @@ static int bdisp_probe(struct platform_device *pdev) init_waitqueue_head(&bdisp->irq_queue); INIT_DELAYED_WORK(&bdisp->timeout_work, bdisp_irq_timeout); bdisp->work_queue = create_workqueue(BDISP_NAME); + if (!bdisp->work_queue) + return -ENOMEM; spin_lock_init(&bdisp->slock); mutex_init(&bdisp->lock); From 1205c52cf270a99c3ab23d97afffb7e9ffff0bda Mon Sep 17 00:00:00 2001 From: Dafna Hirschfeld Date: Fri, 30 Oct 2020 14:46:08 +0100 Subject: [PATCH 044/755] media: uapi: add MEDIA_BUS_FMT_METADATA_FIXED media bus format. [ Upstream commit 6ad253cc3436269fc6bcff03d704c672f368da0a ] MEDIA_BUS_FMT_METADATA_FIXED should be used when the same driver handles both sides of the link and the bus format is a fixed metadata format that is not configurable from userspace. The width and height will be set to 0 for this format. Signed-off-by: Dafna Hirschfeld Acked-by: Helen Koike Acked-by: Sakari Ailus Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Stable-dep-of: eed9496a0501 ("media: av7110: prevent underflow in write_ts_to_decoder()") Signed-off-by: Sasha Levin --- .../media/uapi/v4l/subdev-formats.rst | 27 +++++++++++++++++++ include/uapi/linux/media-bus-format.h | 8 ++++++ 2 files changed, 35 insertions(+) diff --git a/Documentation/media/uapi/v4l/subdev-formats.rst b/Documentation/media/uapi/v4l/subdev-formats.rst index 15e11f27b4c8..b89a2f6c9155 100644 --- a/Documentation/media/uapi/v4l/subdev-formats.rst +++ b/Documentation/media/uapi/v4l/subdev-formats.rst @@ -7794,3 +7794,30 @@ formats. - 0x5001 - Interleaved raw UYVY and JPEG image format with embedded meta-data used by Samsung S3C73MX camera sensors. + +.. _v4l2-mbus-metadata-fmts: + +Metadata Formats +^^^^^^^^^^^^^^^^ + +This section lists all metadata formats. + +The following table lists the existing metadata formats. + +.. tabularcolumns:: |p{8.0cm}|p{1.4cm}|p{7.7cm}| + +.. flat-table:: Metadata formats + :header-rows: 1 + :stub-columns: 0 + + * - Identifier + - Code + - Comments + * .. _MEDIA-BUS-FMT-METADATA-FIXED: + + - MEDIA_BUS_FMT_METADATA_FIXED + - 0x7001 + - This format should be used when the same driver handles + both sides of the link and the bus format is a fixed + metadata format that is not configurable from userspace. + Width and height will be set to 0 for this format. diff --git a/include/uapi/linux/media-bus-format.h b/include/uapi/linux/media-bus-format.h index 16c1fa2d89a4..052c8308b995 100644 --- a/include/uapi/linux/media-bus-format.h +++ b/include/uapi/linux/media-bus-format.h @@ -155,4 +155,12 @@ /* HSV - next is 0x6002 */ #define MEDIA_BUS_FMT_AHSV8888_1X32 0x6001 +/* + * This format should be used when the same driver handles + * both sides of the link and the bus format is a fixed + * metadata format that is not configurable from userspace. + * Width and height will be set to 0 for this format. + */ +#define MEDIA_BUS_FMT_METADATA_FIXED 0x7001 + #endif /* __LINUX_MEDIA_BUS_FORMAT_H */ From 620b983589e0223876bf1463b01100a9c67b56ba Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 7 Mar 2023 11:00:23 +0100 Subject: [PATCH 045/755] media: av7110: prevent underflow in write_ts_to_decoder() [ Upstream commit eed9496a0501357aa326ddd6b71408189ed872eb ] The buf[4] value comes from the user via ts_play(). It is a value in the u8 range. The final length we pass to av7110_ipack_instant_repack() is "len - (buf[4] + 1) - 4" so add a check to ensure that the length is not negative. It's not clear that passing a negative len value does anything bad necessarily, but it's not best practice. With the new bounds checking the "if (!len)" condition is no longer possible or required so remove that. Fixes: fd46d16d602a ("V4L/DVB (11759): dvb-ttpci: Add TS replay capability") Signed-off-by: Dan Carpenter Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin --- drivers/media/pci/ttpci/av7110_av.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/media/pci/ttpci/av7110_av.c b/drivers/media/pci/ttpci/av7110_av.c index ea9f7d0058a2..e201d5a56bc6 100644 --- a/drivers/media/pci/ttpci/av7110_av.c +++ b/drivers/media/pci/ttpci/av7110_av.c @@ -822,10 +822,10 @@ static int write_ts_to_decoder(struct av7110 *av7110, int type, const u8 *buf, s av7110_ipack_flush(ipack); if (buf[3] & ADAPT_FIELD) { + if (buf[4] > len - 1 - 4) + return 0; len -= buf[4] + 1; buf += buf[4] + 1; - if (!len) - return 0; } av7110_ipack_instant_repack(buf + 4, len - 4, ipack); From 37c8085cf9c08c6da1821f906111c5bbaef3c0c7 Mon Sep 17 00:00:00 2001 From: Mukesh Ojha Date: Thu, 16 Mar 2023 20:44:26 +0530 Subject: [PATCH 046/755] firmware: qcom_scm: Clear download bit during reboot [ Upstream commit 781d32d1c9709fd25655c4e3e3e15370ae4ae4db ] During normal restart of a system download bit should be cleared irrespective of whether download mode is set or not. Fixes: 8c1b7dc9ba22 ("firmware: qcom: scm: Expose download-mode control") Signed-off-by: Mukesh Ojha Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/1678979666-551-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Sasha Levin --- drivers/firmware/qcom_scm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index b9fdc20b4eb9..eda25d506059 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -585,8 +585,7 @@ static int qcom_scm_probe(struct platform_device *pdev) static void qcom_scm_shutdown(struct platform_device *pdev) { /* Clean shutdown, disable download mode to allow normal restart */ - if (download_mode) - qcom_scm_set_download_mode(false); + qcom_scm_set_download_mode(false); } static const struct of_device_id qcom_scm_dt_match[] = { From 594726c93841c9e6182d3af540c6f317464bc23d Mon Sep 17 00:00:00 2001 From: Jonathan Marek Date: Mon, 13 Jul 2020 18:53:40 -0400 Subject: [PATCH 047/755] drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup} [ Upstream commit 17e822f7591fb66162aca07685dc0b01468e5480 ] adreno_gpu_init calls pm_runtime_enable, so adreno_gpu_cleanup needs to call pm_runtime_disable. Signed-off-by: Jonathan Marek Signed-off-by: Rob Clark Stable-dep-of: db7662d076c9 ("drm/msm/adreno: drop bogus pm_runtime_set_active()") Signed-off-by: Sasha Levin --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index 3802ad38c519..0d9404d2afe4 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -908,11 +908,14 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev, void adreno_gpu_cleanup(struct adreno_gpu *adreno_gpu) { struct msm_gpu *gpu = &adreno_gpu->base; + struct msm_drm_private *priv = gpu->dev->dev_private; unsigned int i; for (i = 0; i < ARRAY_SIZE(adreno_gpu->info->fw); i++) release_firmware(adreno_gpu->fw[i]); + pm_runtime_disable(&priv->gpu_pdev->dev); + icc_put(gpu->icc_path); msm_gpu_cleanup(&adreno_gpu->base); From 438d00b18d55377f27266245ac7321ac01827806 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Mon, 13 Jun 2022 11:20:30 -0700 Subject: [PATCH 048/755] drm/msm/adreno: Defer enabling runpm until hw_init() [ Upstream commit 4b18299b33655fa9672b774b6df774dc03d6aee8 ] To avoid preventing the display from coming up before the rootfs is mounted, without resorting to packing fw in the initrd, the GPU has this limbo state where the device is probed, but we aren't ready to start sending commands to it. This is particularly problematic for a6xx, since the GMU (which requires fw to be loaded) is the one that is controlling the power/clk/icc votes. So defer enabling runpm until we are ready to call gpu->hw_init(), as that is a point where we know we have all the needed fw and are ready to start sending commands to the coproc's. Signed-off-by: Rob Clark Patchwork: https://patchwork.freedesktop.org/patch/489337/ Link: https://lore.kernel.org/r/20220613182036.2567963-1-robdclark@gmail.com Stable-dep-of: db7662d076c9 ("drm/msm/adreno: drop bogus pm_runtime_set_active()") Signed-off-by: Sasha Levin --- drivers/gpu/drm/msm/adreno/adreno_device.c | 6 ++++++ drivers/gpu/drm/msm/adreno/adreno_gpu.c | 1 - 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c index 0888e0df660d..6ad9d2de07ed 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_device.c +++ b/drivers/gpu/drm/msm/adreno/adreno_device.c @@ -233,6 +233,12 @@ struct msm_gpu *adreno_load_gpu(struct drm_device *dev) if (ret) return NULL; + /* + * Now that we have firmware loaded, and are ready to begin + * booting the gpu, go ahead and enable runpm: + */ + pm_runtime_enable(&pdev->dev); + /* Make sure pm runtime is active and reset any previous errors */ pm_runtime_set_active(&pdev->dev); diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index 0d9404d2afe4..b472cbe6adff 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -899,7 +899,6 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev, pm_runtime_set_autosuspend_delay(&pdev->dev, adreno_gpu->info->inactive_period); pm_runtime_use_autosuspend(&pdev->dev); - pm_runtime_enable(&pdev->dev); return msm_gpu_init(drm, pdev, &adreno_gpu->base, &funcs->base, adreno_gpu->info->name, &adreno_gpu_config); From f79421c36070c5fe93182198edddb103cdef654f Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Fri, 3 Mar 2023 17:48:06 +0100 Subject: [PATCH 049/755] drm/msm/adreno: drop bogus pm_runtime_set_active() [ Upstream commit db7662d076c973072d788bd0e8130e04430307a1 ] The runtime PM status can only be updated while runtime PM is disabled. Drop the bogus pm_runtime_set_active() call that was made after enabling runtime PM and which (incidentally but correctly) left the runtime PM status set to 'suspended'. Fixes: 2c087a336676 ("drm/msm/adreno: Load the firmware before bringing up the hardware") Signed-off-by: Johan Hovold Patchwork: https://patchwork.freedesktop.org/patch/524972/ Link: https://lore.kernel.org/r/20230303164807.13124-4-johan+linaro@kernel.org Signed-off-by: Rob Clark Signed-off-by: Sasha Levin --- drivers/gpu/drm/msm/adreno/adreno_device.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/adreno_device.c b/drivers/gpu/drm/msm/adreno/adreno_device.c index 6ad9d2de07ed..2a727ab0faf7 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_device.c +++ b/drivers/gpu/drm/msm/adreno/adreno_device.c @@ -239,9 +239,6 @@ struct msm_gpu *adreno_load_gpu(struct drm_device *dev) */ pm_runtime_enable(&pdev->dev); - /* Make sure pm runtime is active and reset any previous errors */ - pm_runtime_set_active(&pdev->dev); - ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) { pm_runtime_put_sync(&pdev->dev); From 0a6d476d9c9d245bd7bd37d374e416c6d5b858f4 Mon Sep 17 00:00:00 2001 From: Georgii Kruglov Date: Tue, 21 Mar 2023 23:37:15 +0300 Subject: [PATCH 050/755] mmc: sdhci-of-esdhc: fix quirk to ignore command inhibit for data [ Upstream commit 0dd8316037a2a6d85b2be208bef9991de7b42170 ] If spec_reg is equal to 'SDHCI_PRESENT_STATE', esdhc_readl_fixup() fixes up register value and returns it immediately. As a result, the further block (spec_reg == SDHCI_PRESENT_STATE) &&(esdhc->quirk_ignore_data_inhibit == true), is never executed. The patch merges the second block into the first one. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 1f1929f3f2fa ("mmc: sdhci-of-esdhc: add quirk to ignore command inhibit for data") Signed-off-by: Georgii Kruglov Acked-by: Adrian Hunter Link: https://lore.kernel.org/r/20230321203715.3975-1-georgy.kruglov@yandex.ru Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin --- drivers/mmc/host/sdhci-of-esdhc.c | 24 +++++++++++------------- 1 file changed, 11 insertions(+), 13 deletions(-) diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 69c133e7ced0..48765208e295 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -124,6 +124,7 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host, return ret; } } + /* * The DAT[3:0] line signal levels and the CMD line signal level are * not compatible with standard SDHC register. The line signal levels @@ -135,6 +136,16 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host, ret = value & 0x000fffff; ret |= (value >> 4) & SDHCI_DATA_LVL_MASK; ret |= (value << 1) & SDHCI_CMD_LVL; + + /* + * Some controllers have unreliable Data Line Active + * bit for commands with busy signal. This affects + * Command Inhibit (data) bit. Just ignore it since + * MMC core driver has already polled card status + * with CMD13 after any command with busy siganl. + */ + if (esdhc->quirk_ignore_data_inhibit) + ret &= ~SDHCI_DATA_INHIBIT; return ret; } @@ -149,19 +160,6 @@ static u32 esdhc_readl_fixup(struct sdhci_host *host, return ret; } - /* - * Some controllers have unreliable Data Line Active - * bit for commands with busy signal. This affects - * Command Inhibit (data) bit. Just ignore it since - * MMC core driver has already polled card status - * with CMD13 after any command with busy siganl. - */ - if ((spec_reg == SDHCI_PRESENT_STATE) && - (esdhc->quirk_ignore_data_inhibit == true)) { - ret = value & ~SDHCI_DATA_INHIBIT; - return ret; - } - ret = value; return ret; } From 9b53238b3be2766bc013a490a98548c56f18b0e3 Mon Sep 17 00:00:00 2001 From: Harshit Mogalapalli Date: Mon, 13 Mar 2023 22:27:11 -0700 Subject: [PATCH 051/755] drm/lima/lima_drv: Add missing unwind goto in lima_pdev_probe() [ Upstream commit c5647cae2704e58d1c4e5fedbf63f11bca6376c9 ] Smatch reports: drivers/gpu/drm/lima/lima_drv.c:396 lima_pdev_probe() warn: missing unwind goto? Store return value in err and goto 'err_out0' which has lima_sched_slab_fini() before returning. Fixes: a1d2a6339961 ("drm/lima: driver for ARM Mali4xx GPUs") Signed-off-by: Harshit Mogalapalli Signed-off-by: Qiang Yu Link: https://patchwork.freedesktop.org/patch/msgid/20230314052711.4061652-1-harshit.m.mogalapalli@oracle.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/lima/lima_drv.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/lima/lima_drv.c b/drivers/gpu/drm/lima/lima_drv.c index 75ec703d22e0..89513c7c50d5 100644 --- a/drivers/gpu/drm/lima/lima_drv.c +++ b/drivers/gpu/drm/lima/lima_drv.c @@ -300,8 +300,10 @@ static int lima_pdev_probe(struct platform_device *pdev) /* Allocate and initialize the DRM device. */ ddev = drm_dev_alloc(&lima_drm_driver, &pdev->dev); - if (IS_ERR(ddev)) - return PTR_ERR(ddev); + if (IS_ERR(ddev)) { + err = PTR_ERR(ddev); + goto err_out0; + } ddev->dev_private = ldev; ldev->ddev = ddev; From 73b262115f5f5c245cce58aee75fdd79bc500b4d Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Mar 2023 14:33:53 -0700 Subject: [PATCH 052/755] regulator: core: Consistently set mutex_owner when using ww_mutex_lock_slow() [ Upstream commit b83a1772be854f87602de14726737d3e5b06e1f4 ] When a codepath locks a rdev using ww_mutex_lock_slow() directly then that codepath is responsible for incrementing the "ref_cnt" and also setting the "mutex_owner" to "current". The regulator core consistently got that right for "ref_cnt" but didn't always get it right for "mutex_owner". Let's fix this. It's unlikely that this truly matters because the "mutex_owner" is only needed if we're going to do subsequent locking of the same rdev. However, even though it's not truly needed it seems less surprising if we consistently set "mutex_owner" properly. Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking") Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20230329143317.RFC.v2.1.I4e9d433ea26360c06dd1381d091c82bb1a4ce843@changeid Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/regulator/core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 0179716f74d7..1cdf924c0111 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -344,6 +344,7 @@ static void regulator_lock_dependent(struct regulator_dev *rdev, ww_mutex_lock_slow(&new_contended_rdev->mutex, ww_ctx); old_contended_rdev = new_contended_rdev; old_contended_rdev->ref_cnt++; + old_contended_rdev->mutex_owner = current; } err = regulator_lock_recursive(rdev, @@ -5659,6 +5660,7 @@ static void regulator_summary_lock(struct ww_acquire_ctx *ww_ctx) ww_mutex_lock_slow(&new_contended_rdev->mutex, ww_ctx); old_contended_rdev = new_contended_rdev; old_contended_rdev->ref_cnt++; + old_contended_rdev->mutex_owner = current; } err = regulator_summary_lock_all(ww_ctx, From 5224ea575196db11c0a909a78ea426ccdb92f064 Mon Sep 17 00:00:00 2001 From: Douglas Anderson Date: Wed, 29 Mar 2023 14:33:54 -0700 Subject: [PATCH 053/755] regulator: core: Avoid lockdep reports when resolving supplies [ Upstream commit cba6cfdc7c3f1516f0d08ddfb24e689af0932573 ] An automated bot told me that there was a potential lockdep problem with regulators. This was on the chromeos-5.15 kernel, but I see nothing that would be different downstream compared to upstream. The bot said: ============================================ WARNING: possible recursive locking detected 5.15.104-lockdep-17461-gc1e499ed6604 #1 Not tainted -------------------------------------------- kworker/u16:4/115 is trying to acquire lock: ffffff8083110170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: create_regulator+0x398/0x7ec but task is already holding lock: ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(regulator_ww_class_mutex); lock(regulator_ww_class_mutex); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by kworker/u16:4/115: #0: ffffff808006a948 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work+0x520/0x1348 #1: ffffffc00e0a7cc0 ((work_completion)(&entry->work)){+.+.}-{0:0}, at: process_one_work+0x55c/0x1348 #2: ffffff80828a2260 (&dev->mutex){....}-{3:3}, at: __device_attach_async_helper+0xd0/0x2a4 #3: ffffff808378e170 (regulator_ww_class_mutex){+.+.}-{3:3}, at: ww_mutex_trylock+0x3c/0x7b8 stack backtrace: CPU: 2 PID: 115 Comm: kworker/u16:4 Not tainted 5.15.104-lockdep-17461-gc1e499ed6604 #1 9292e52fa83c0e23762b2b3aa1bacf5787a4d5da Hardware name: Google Quackingstick (rev0+) (DT) Workqueue: events_unbound async_run_entry_fn Call trace: dump_backtrace+0x0/0x4ec show_stack+0x34/0x50 dump_stack_lvl+0xdc/0x11c dump_stack+0x1c/0x48 __lock_acquire+0x16d4/0x6c74 lock_acquire+0x208/0x750 __mutex_lock_common+0x11c/0x11f8 ww_mutex_lock+0xc0/0x440 create_regulator+0x398/0x7ec regulator_resolve_supply+0x654/0x7c4 regulator_register_resolve_supply+0x30/0x120 class_for_each_device+0x1b8/0x230 regulator_register+0x17a4/0x1f40 devm_regulator_register+0x60/0xd0 reg_fixed_voltage_probe+0x728/0xaec platform_probe+0x150/0x1c8 really_probe+0x274/0xa20 __driver_probe_device+0x1dc/0x3f4 driver_probe_device+0x78/0x1c0 __device_attach_driver+0x1ac/0x2c8 bus_for_each_drv+0x11c/0x190 __device_attach_async_helper+0x1e4/0x2a4 async_run_entry_fn+0xa0/0x3ac process_one_work+0x638/0x1348 worker_thread+0x4a8/0x9c4 kthread+0x2e4/0x3a0 ret_from_fork+0x10/0x20 The problem was first reported soon after we made many of the regulators probe asynchronously, though nothing I've seen implies that the problems couldn't have also happened even without that. I haven't personally been able to reproduce the lockdep issue, but the issue does look somewhat legitimate. Specifically, it looks like in regulator_resolve_supply() we are holding a "rdev" lock while calling set_supply() -> create_regulator() which grabs the lock of a _different_ "rdev" (the one for our supply). This is not necessarily safe from a lockdep perspective since there is no documented ordering between these two locks. In reality, we should always be locking a regulator before the supplying regulator, so I don't expect there to be any real deadlocks in practice. However, the regulator framework in general doesn't express this to lockdep. Let's fix the issue by simply grabbing the two locks involved in the same way we grab multiple locks elsewhere in the regulator framework: using the "wound/wait" mechanisms. Fixes: eaa7995c529b ("regulator: core: avoid regulator_resolve_supply() race condition") Signed-off-by: Douglas Anderson Link: https://lore.kernel.org/r/20230329143317.RFC.v2.2.I30d8e1ca10cfbe5403884cdd192253a2e063eb9e@changeid Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/regulator/core.c | 91 ++++++++++++++++++++++++++++++++++++---- 1 file changed, 83 insertions(+), 8 deletions(-) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 1cdf924c0111..06da271ad5dd 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -217,6 +217,78 @@ void regulator_unlock(struct regulator_dev *rdev) } EXPORT_SYMBOL_GPL(regulator_unlock); +/** + * regulator_lock_two - lock two regulators + * @rdev1: first regulator + * @rdev2: second regulator + * @ww_ctx: w/w mutex acquire context + * + * Locks both rdevs using the regulator_ww_class. + */ +static void regulator_lock_two(struct regulator_dev *rdev1, + struct regulator_dev *rdev2, + struct ww_acquire_ctx *ww_ctx) +{ + struct regulator_dev *tmp; + int ret; + + ww_acquire_init(ww_ctx, ®ulator_ww_class); + + /* Try to just grab both of them */ + ret = regulator_lock_nested(rdev1, ww_ctx); + WARN_ON(ret); + ret = regulator_lock_nested(rdev2, ww_ctx); + if (ret != -EDEADLOCK) { + WARN_ON(ret); + goto exit; + } + + while (true) { + /* + * Start of loop: rdev1 was locked and rdev2 was contended. + * Need to unlock rdev1, slowly lock rdev2, then try rdev1 + * again. + */ + regulator_unlock(rdev1); + + ww_mutex_lock_slow(&rdev2->mutex, ww_ctx); + rdev2->ref_cnt++; + rdev2->mutex_owner = current; + ret = regulator_lock_nested(rdev1, ww_ctx); + + if (ret == -EDEADLOCK) { + /* More contention; swap which needs to be slow */ + tmp = rdev1; + rdev1 = rdev2; + rdev2 = tmp; + } else { + WARN_ON(ret); + break; + } + } + +exit: + ww_acquire_done(ww_ctx); +} + +/** + * regulator_unlock_two - unlock two regulators + * @rdev1: first regulator + * @rdev2: second regulator + * @ww_ctx: w/w mutex acquire context + * + * The inverse of regulator_lock_two(). + */ + +static void regulator_unlock_two(struct regulator_dev *rdev1, + struct regulator_dev *rdev2, + struct ww_acquire_ctx *ww_ctx) +{ + regulator_unlock(rdev2); + regulator_unlock(rdev1); + ww_acquire_fini(ww_ctx); +} + static bool regulator_supply_is_couple(struct regulator_dev *rdev) { struct regulator_dev *c_rdev; @@ -1419,8 +1491,8 @@ static int set_machine_constraints(struct regulator_dev *rdev) /** * set_supply - set regulator supply regulator - * @rdev: regulator name - * @supply_rdev: supply regulator name + * @rdev: regulator (locked) + * @supply_rdev: supply regulator (locked)) * * Called by platform initialisation code to set the supply regulator for this * regulator. This ensures that a regulators supply will also be enabled by the @@ -1592,6 +1664,8 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, struct regulator *regulator; int err = 0; + lockdep_assert_held_once(&rdev->mutex.base); + if (dev) { char buf[REG_STR_SIZE]; int size; @@ -1619,9 +1693,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev, regulator->rdev = rdev; regulator->supply_name = supply_name; - regulator_lock(rdev); list_add(®ulator->list, &rdev->consumer_list); - regulator_unlock(rdev); if (dev) { regulator->dev = dev; @@ -1787,6 +1859,7 @@ static int regulator_resolve_supply(struct regulator_dev *rdev) { struct regulator_dev *r; struct device *dev = rdev->dev.parent; + struct ww_acquire_ctx ww_ctx; int ret = 0; /* No supply to resolve? */ @@ -1853,23 +1926,23 @@ static int regulator_resolve_supply(struct regulator_dev *rdev) * between rdev->supply null check and setting rdev->supply in * set_supply() from concurrent tasks. */ - regulator_lock(rdev); + regulator_lock_two(rdev, r, &ww_ctx); /* Supply just resolved by a concurrent task? */ if (rdev->supply) { - regulator_unlock(rdev); + regulator_unlock_two(rdev, r, &ww_ctx); put_device(&r->dev); goto out; } ret = set_supply(rdev, r); if (ret < 0) { - regulator_unlock(rdev); + regulator_unlock_two(rdev, r, &ww_ctx); put_device(&r->dev); goto out; } - regulator_unlock(rdev); + regulator_unlock_two(rdev, r, &ww_ctx); /* * In set_machine_constraints() we may have turned this regulator on @@ -1984,7 +2057,9 @@ struct regulator *_regulator_get(struct device *dev, const char *id, return regulator; } + regulator_lock(rdev); regulator = create_regulator(rdev, dev, id); + regulator_unlock(rdev); if (regulator == NULL) { regulator = ERR_PTR(-ENOMEM); module_put(rdev->owner); From 0c61a6897c47a6aff964d5baee9395b0c5f30fb9 Mon Sep 17 00:00:00 2001 From: Uros Bizjak Date: Mon, 27 Feb 2023 17:09:17 +0100 Subject: [PATCH 054/755] x86/apic: Fix atomic update of offset in reserve_eilvt_offset() [ Upstream commit f96fb2df3eb31ede1b34b0521560967310267750 ] The detection of atomic update failure in reserve_eilvt_offset() is not correct. The value returned by atomic_cmpxchg() should be compared to the old value from the location to be updated. If these two are the same, then atomic update succeeded and "eilvt_offsets[offset]" location is updated to "new" in an atomic way. Otherwise, the atomic update failed and it should be retried with the value from "eilvt_offsets[offset]" - exactly what atomic_try_cmpxchg() does in a correct and more optimal way. Fixes: a68c439b1966c ("apic, x86: Check if EILVT APIC registers are available (AMD only)") Signed-off-by: Uros Bizjak Signed-off-by: Borislav Petkov (AMD) Link: https://lore.kernel.org/r/20230227160917.107820-1-ubizjak@gmail.com Signed-off-by: Sasha Levin --- arch/x86/kernel/apic/apic.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 68c734032523..a3b7b2fb04cb 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -410,10 +410,9 @@ static unsigned int reserve_eilvt_offset(int offset, unsigned int new) if (vector && !eilvt_entry_is_changeable(vector, new)) /* may not change if vectors are different */ return rsvd; - rsvd = atomic_cmpxchg(&eilvt_offsets[offset], rsvd, new); - } while (rsvd != new); + } while (!atomic_try_cmpxchg(&eilvt_offsets[offset], &rsvd, new)); - rsvd &= ~APIC_EILVT_MASKED; + rsvd = new & ~APIC_EILVT_MASKED; if (rsvd && rsvd != vector) pr_info("LVT offset %d assigned for vector 0x%02x\n", offset, rsvd); From cd1583caed7ea879ecb638ed876960e41363b7b6 Mon Sep 17 00:00:00 2001 From: Zheng Wang Date: Sat, 18 Mar 2023 16:15:06 +0800 Subject: [PATCH 055/755] media: dm1105: Fix use after free bug in dm1105_remove due to race condition [ Upstream commit 5abda7a16698d4d1f47af1168d8fa2c640116b4a ] In dm1105_probe, it called dm1105_ir_init and bound &dm1105->ir.work with dm1105_emit_key. When it handles IRQ request with dm1105_irq, it may call schedule_work to start the work. When we call dm1105_remove to remove the driver, there may be a sequence as follows: Fix it by finishing the work before cleanup in dm1105_remove CPU0 CPU1 |dm1105_emit_key dm1105_remove | dm1105_ir_exit | rc_unregister_device | rc_free_device | rc_dev_release | kfree(dev); | | | rc_keydown | //use Fixes: 34d2f9bf189c ("V4L/DVB: dm1105: use dm1105_dev & dev instead of dm1105dvb") Signed-off-by: Zheng Wang Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin --- drivers/media/pci/dm1105/dm1105.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/media/pci/dm1105/dm1105.c b/drivers/media/pci/dm1105/dm1105.c index bb3a8cc9de0c..6dbd98a3e5b8 100644 --- a/drivers/media/pci/dm1105/dm1105.c +++ b/drivers/media/pci/dm1105/dm1105.c @@ -1179,6 +1179,7 @@ static void dm1105_remove(struct pci_dev *pdev) struct dvb_demux *dvbdemux = &dev->demux; struct dmx_demux *dmx = &dvbdemux->dmx; + cancel_work_sync(&dev->ir.work); dm1105_ir_exit(dev); dmx->close(dmx); dvb_net_release(&dev->dvbnet); From a4b6ab360f56ccdcde29eab29f493d8c464c3ffb Mon Sep 17 00:00:00 2001 From: Zheng Wang Date: Sat, 18 Mar 2023 16:50:23 +0800 Subject: [PATCH 056/755] media: saa7134: fix use after free bug in saa7134_finidev due to race condition [ Upstream commit 30cf57da176cca80f11df0d9b7f71581fe601389 ] In saa7134_initdev, it will call saa7134_hwinit1. There are three function invoking here: saa7134_video_init1, saa7134_ts_init1 and saa7134_vbi_init1. All of them will init a timer with same function. Take saa7134_video_init1 as an example. It'll bound &dev->video_q.timeout with saa7134_buffer_timeout. In buffer_activate, the timer funtcion is started. If we remove the module or device which will call saa7134_finidev to make cleanup, there may be a unfinished work. The possible sequence is as follows, which will cause a typical UAF bug. Fix it by canceling the timer works accordingly before cleanup in saa7134_finidev. CPU0 CPU1 |saa7134_buffer_timeout saa7134_finidev | kfree(dev); | | | saa7134_buffer_next | //use dev Fixes: 1e7126b4a86a ("media: saa7134: Convert timers to use timer_setup()") Signed-off-by: Zheng Wang Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin --- drivers/media/pci/saa7134/saa7134-ts.c | 1 + drivers/media/pci/saa7134/saa7134-vbi.c | 1 + drivers/media/pci/saa7134/saa7134-video.c | 1 + 3 files changed, 3 insertions(+) diff --git a/drivers/media/pci/saa7134/saa7134-ts.c b/drivers/media/pci/saa7134/saa7134-ts.c index 6a5053126237..437dbe5e75e2 100644 --- a/drivers/media/pci/saa7134/saa7134-ts.c +++ b/drivers/media/pci/saa7134/saa7134-ts.c @@ -300,6 +300,7 @@ int saa7134_ts_start(struct saa7134_dev *dev) int saa7134_ts_fini(struct saa7134_dev *dev) { + del_timer_sync(&dev->ts_q.timeout); saa7134_pgtable_free(dev->pci, &dev->ts_q.pt); return 0; } diff --git a/drivers/media/pci/saa7134/saa7134-vbi.c b/drivers/media/pci/saa7134/saa7134-vbi.c index 3f0b0933eed6..3e773690468b 100644 --- a/drivers/media/pci/saa7134/saa7134-vbi.c +++ b/drivers/media/pci/saa7134/saa7134-vbi.c @@ -185,6 +185,7 @@ int saa7134_vbi_init1(struct saa7134_dev *dev) int saa7134_vbi_fini(struct saa7134_dev *dev) { /* nothing */ + del_timer_sync(&dev->vbi_q.timeout); return 0; } diff --git a/drivers/media/pci/saa7134/saa7134-video.c b/drivers/media/pci/saa7134/saa7134-video.c index e454a288229b..ea26c8c57494 100644 --- a/drivers/media/pci/saa7134/saa7134-video.c +++ b/drivers/media/pci/saa7134/saa7134-video.c @@ -2154,6 +2154,7 @@ int saa7134_video_init1(struct saa7134_dev *dev) void saa7134_video_fini(struct saa7134_dev *dev) { + del_timer_sync(&dev->video_q.timeout); /* free stuff */ vb2_queue_release(&dev->video_vbq); saa7134_pgtable_free(dev->pci, &dev->video_q.pt); From aebe8e43d85e900776ec3165022b21ff0105823a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 23 Apr 2021 16:59:34 +0200 Subject: [PATCH 057/755] media: rcar_fdp1: simplify error check logic at fdp_open() [ Upstream commit fa9f443f7c962d072d150472e2bb77de39817a9a ] Avoid some code duplication by moving the common error path logic at fdp_open(). Signed-off-by: Mauro Carvalho Chehab Stable-dep-of: c766c90faf93 ("media: rcar_fdp1: Fix refcount leak in probe and remove function") Signed-off-by: Sasha Levin --- drivers/media/platform/rcar_fdp1.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c index 97bed45360f0..d6eee66c8dd4 100644 --- a/drivers/media/platform/rcar_fdp1.c +++ b/drivers/media/platform/rcar_fdp1.c @@ -2121,9 +2121,7 @@ static int fdp1_open(struct file *file) if (ctx->hdl.error) { ret = ctx->hdl.error; - v4l2_ctrl_handler_free(&ctx->hdl); - kfree(ctx); - goto done; + goto error_ctx; } ctx->fh.ctrl_handler = &ctx->hdl; @@ -2137,10 +2135,7 @@ static int fdp1_open(struct file *file) if (IS_ERR(ctx->fh.m2m_ctx)) { ret = PTR_ERR(ctx->fh.m2m_ctx); - - v4l2_ctrl_handler_free(&ctx->hdl); - kfree(ctx); - goto done; + goto error_ctx; } /* Perform any power management required */ @@ -2151,6 +2146,12 @@ static int fdp1_open(struct file *file) dprintk(fdp1, "Created instance: %p, m2m_ctx: %p\n", ctx, ctx->fh.m2m_ctx); + mutex_unlock(&fdp1->dev_mutex); + return 0; + +error_ctx: + v4l2_ctrl_handler_free(&ctx->hdl); + kfree(ctx); done: mutex_unlock(&fdp1->dev_mutex); return ret; From 03d23445925940b1cb49da3bb388c6436e1867a8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Fri, 23 Apr 2021 16:59:34 +0200 Subject: [PATCH 058/755] media: rcar_fdp1: fix pm_runtime_get_sync() usage count [ Upstream commit 45e75a8c6fa455a5909ac04db76a4b15d6bb8368 ] The pm_runtime_get_sync() internally increments the dev->power.usage_count without decrementing it, even on errors. Replace it by the new pm_runtime_resume_and_get(), introduced by: commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") in order to properly decrement the usage counter, avoiding a potential PM usage counter leak. Also, right now, the driver is ignoring any troubles when trying to do PM resume. So, add the proper error handling for the code. Reviewed-by: Jonathan Cameron Signed-off-by: Mauro Carvalho Chehab Stable-dep-of: c766c90faf93 ("media: rcar_fdp1: Fix refcount leak in probe and remove function") Signed-off-by: Sasha Levin --- drivers/media/platform/rcar_fdp1.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c index d6eee66c8dd4..9caddc8387b4 100644 --- a/drivers/media/platform/rcar_fdp1.c +++ b/drivers/media/platform/rcar_fdp1.c @@ -2139,7 +2139,9 @@ static int fdp1_open(struct file *file) } /* Perform any power management required */ - pm_runtime_get_sync(fdp1->dev); + ret = pm_runtime_resume_and_get(fdp1->dev); + if (ret < 0) + goto error_pm; v4l2_fh_add(&ctx->fh); @@ -2149,6 +2151,8 @@ static int fdp1_open(struct file *file) mutex_unlock(&fdp1->dev_mutex); return 0; +error_pm: + v4l2_m2m_ctx_release(ctx->fh.m2m_ctx); error_ctx: v4l2_ctrl_handler_free(&ctx->hdl); kfree(ctx); @@ -2356,7 +2360,9 @@ static int fdp1_probe(struct platform_device *pdev) /* Power up the cells to read HW */ pm_runtime_enable(&pdev->dev); - pm_runtime_get_sync(fdp1->dev); + ret = pm_runtime_resume_and_get(fdp1->dev); + if (ret < 0) + goto disable_pm; hw_version = fdp1_read(fdp1, FD1_IP_INTDATA); switch (hw_version) { @@ -2385,6 +2391,9 @@ static int fdp1_probe(struct platform_device *pdev) return 0; +disable_pm: + pm_runtime_disable(fdp1->dev); + release_m2m: v4l2_m2m_release(fdp1->m2m_dev); From 75b55a3cbb4a63bff865b3102f3ea01cdb0759c1 Mon Sep 17 00:00:00 2001 From: Cai Huoqing Date: Wed, 1 Sep 2021 07:55:24 +0200 Subject: [PATCH 059/755] media: rcar_fdp1: Make use of the helper function devm_platform_ioremap_resource() [ Upstream commit 736cce12fa630e28705de06570d74f0513d948d5 ] Use the devm_platform_ioremap_resource() helper instead of calling platform_get_resource() and devm_ioremap_resource() separately Signed-off-by: Cai Huoqing Reviewed-by: Kieran Bingham Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Stable-dep-of: c766c90faf93 ("media: rcar_fdp1: Fix refcount leak in probe and remove function") Signed-off-by: Sasha Levin --- drivers/media/platform/rcar_fdp1.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c index 9caddc8387b4..90575a58ad88 100644 --- a/drivers/media/platform/rcar_fdp1.c +++ b/drivers/media/platform/rcar_fdp1.c @@ -2260,7 +2260,6 @@ static int fdp1_probe(struct platform_device *pdev) struct fdp1_dev *fdp1; struct video_device *vfd; struct device_node *fcp_node; - struct resource *res; struct clk *clk; unsigned int i; @@ -2287,8 +2286,7 @@ static int fdp1_probe(struct platform_device *pdev) platform_set_drvdata(pdev, fdp1); /* Memory-mapped registers */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - fdp1->regs = devm_ioremap_resource(&pdev->dev, res); + fdp1->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(fdp1->regs)) return PTR_ERR(fdp1->regs); From 6fd6e2f29c184654641d17cb36d2553ce959606a Mon Sep 17 00:00:00 2001 From: Tang Bin Date: Thu, 21 Oct 2021 05:09:38 +0200 Subject: [PATCH 060/755] media: rcar_fdp1: Fix the correct variable assignments [ Upstream commit af88c2adbb72a09ab1bb5c37ba388c98fecca69b ] In the function fdp1_probe(), when get irq failed, the function platform_get_irq() log an error message, so remove redundant message here. And the variable type of "ret" is int, the "fdp1->irq" is unsigned int, when irq failed, this place maybe wrong, thus fix it. Signed-off-by: Tang Bin Reviewed-by: Geert Uytterhoeven Reviewed-by: Kieran Bingham Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Stable-dep-of: c766c90faf93 ("media: rcar_fdp1: Fix refcount leak in probe and remove function") Signed-off-by: Sasha Levin --- drivers/media/platform/rcar_fdp1.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c index 90575a58ad88..0967b10a459b 100644 --- a/drivers/media/platform/rcar_fdp1.c +++ b/drivers/media/platform/rcar_fdp1.c @@ -2291,11 +2291,10 @@ static int fdp1_probe(struct platform_device *pdev) return PTR_ERR(fdp1->regs); /* Interrupt service routine registration */ - fdp1->irq = ret = platform_get_irq(pdev, 0); - if (ret < 0) { - dev_err(&pdev->dev, "cannot find IRQ\n"); + ret = platform_get_irq(pdev, 0); + if (ret < 0) return ret; - } + fdp1->irq = ret; ret = devm_request_irq(&pdev->dev, fdp1->irq, fdp1_irq_handler, 0, dev_name(&pdev->dev), fdp1); From 9df630dafa1a59946d1da6f070d4cb64f14ea57c Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Fri, 6 Jan 2023 11:58:09 +0400 Subject: [PATCH 061/755] media: rcar_fdp1: Fix refcount leak in probe and remove function [ Upstream commit c766c90faf93897b77c9c5daa603cffab85ba907 ] rcar_fcp_get() take reference, which should be balanced with rcar_fcp_put(). Add missing rcar_fcp_put() in fdp1_remove and the error paths of fdp1_probe() to fix this. Fixes: 4710b752e029 ("[media] v4l: Add Renesas R-Car FDP1 Driver") Signed-off-by: Miaoqian Lin Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart [hverkuil: resolve merge conflict, remove() is now void] Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin --- drivers/media/platform/rcar_fdp1.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/media/platform/rcar_fdp1.c b/drivers/media/platform/rcar_fdp1.c index 0967b10a459b..af2408b4856e 100644 --- a/drivers/media/platform/rcar_fdp1.c +++ b/drivers/media/platform/rcar_fdp1.c @@ -2317,8 +2317,10 @@ static int fdp1_probe(struct platform_device *pdev) /* Determine our clock rate */ clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) - return PTR_ERR(clk); + if (IS_ERR(clk)) { + ret = PTR_ERR(clk); + goto put_dev; + } fdp1->clk_rate = clk_get_rate(clk); clk_put(clk); @@ -2327,7 +2329,7 @@ static int fdp1_probe(struct platform_device *pdev) ret = v4l2_device_register(&pdev->dev, &fdp1->v4l2_dev); if (ret) { v4l2_err(&fdp1->v4l2_dev, "Failed to register video device\n"); - return ret; + goto put_dev; } /* M2M registration */ @@ -2397,6 +2399,8 @@ release_m2m: unreg_dev: v4l2_device_unregister(&fdp1->v4l2_dev); +put_dev: + rcar_fcp_put(fdp1->fcp); return ret; } @@ -2408,6 +2412,7 @@ static int fdp1_remove(struct platform_device *pdev) video_unregister_device(&fdp1->vfd); v4l2_device_unregister(&fdp1->v4l2_dev); pm_runtime_disable(&pdev->dev); + rcar_fcp_put(fdp1->fcp); return 0; } From 53adb408b17044692b5d26ba99fc0fe813883e3f Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 24 Mar 2023 13:38:33 -0700 Subject: [PATCH 062/755] media: rc: gpio-ir-recv: Fix support for wake-up [ Upstream commit 9c592f8ab114875fdb3b2040f01818e53de44991 ] The driver was intended from the start to be a wake-up source for the system, however due to the absence of a suitable call to device_set_wakeup_capable(), the device_may_wakeup() call used to decide whether to enable the GPIO interrupt as a wake-up source would never happen. Lookup the DT standard "wakeup-source" property and call device_init_wakeup() to ensure the device is flagged as being wakeup capable. Reported-by: Matthew Lear Fixes: fd0f6851eb46 ("[media] rc: Add support for GPIO based IR Receiver driver") Signed-off-by: Florian Fainelli Signed-off-by: Sean Young Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin --- drivers/media/rc/gpio-ir-recv.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/rc/gpio-ir-recv.c b/drivers/media/rc/gpio-ir-recv.c index a20413008c3c..f50398b3ed5f 100644 --- a/drivers/media/rc/gpio-ir-recv.c +++ b/drivers/media/rc/gpio-ir-recv.c @@ -83,6 +83,8 @@ static int gpio_ir_recv_probe(struct platform_device *pdev) rcdev->map_name = RC_MAP_EMPTY; gpio_dev->rcdev = rcdev; + if (of_property_read_bool(np, "wakeup-source")) + device_init_wakeup(dev, true); rc = devm_rc_register_device(dev, rcdev); if (rc < 0) { From 824683dbec234a01bd49a0589ee3323594a6f4cf Mon Sep 17 00:00:00 2001 From: YAN SHI Date: Wed, 12 Apr 2023 11:35:29 +0800 Subject: [PATCH 063/755] regulator: stm32-pwr: fix of_iomap leak [ Upstream commit c4a413e56d16a2ae84e6d8992f215c4dcc7fac20 ] Smatch reports: drivers/regulator/stm32-pwr.c:166 stm32_pwr_regulator_probe() warn: 'base' from of_iomap() not released on lines: 151,166. In stm32_pwr_regulator_probe(), base is not released when devm_kzalloc() fails to allocate memory or devm_regulator_register() fails to register a new regulator device, which may cause a leak. To fix this issue, replace of_iomap() with devm_platform_ioremap_resource(). devm_platform_ioremap_resource() is a specialized function for platform devices. It allows 'base' to be automatically released whether the probe function succeeds or fails. Besides, use IS_ERR(base) instead of !base as the return value of devm_platform_ioremap_resource() can either be a pointer to the remapped memory or an ERR_PTR() encoded error code if the operation fails. Fixes: dc62f951a6a8 ("regulator: stm32-pwr: Fix return value check in stm32_pwr_regulator_probe()") Signed-off-by: YAN SHI Reported-by: kernel test robot Link: https://lore.kernel.org/oe-kbuild-all/202304111750.o2643eJN-lkp@intel.com/ Reviewed-by: Dongliang Mu Link: https://lore.kernel.org/r/20230412033529.18890-1-m202071378@hust.edu.cn Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/regulator/stm32-pwr.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/regulator/stm32-pwr.c b/drivers/regulator/stm32-pwr.c index e0e627b0106e..b94da4992376 100644 --- a/drivers/regulator/stm32-pwr.c +++ b/drivers/regulator/stm32-pwr.c @@ -129,17 +129,16 @@ static const struct regulator_desc stm32_pwr_desc[] = { static int stm32_pwr_regulator_probe(struct platform_device *pdev) { - struct device_node *np = pdev->dev.of_node; struct stm32_pwr_reg *priv; void __iomem *base; struct regulator_dev *rdev; struct regulator_config config = { }; int i, ret = 0; - base = of_iomap(np, 0); - if (!base) { + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) { dev_err(&pdev->dev, "Unable to map IO memory\n"); - return -ENOMEM; + return PTR_ERR(base); } config.dev = &pdev->dev; From 442470948c0401c8b56bec51353fa0efc7b67b73 Mon Sep 17 00:00:00 2001 From: Saurabh Sengar Date: Tue, 28 Mar 2023 00:30:04 -0700 Subject: [PATCH 064/755] x86/ioapic: Don't return 0 from arch_dynirq_lower_bound() [ Upstream commit 5af507bef93c09a94fb8f058213b489178f4cbe5 ] arch_dynirq_lower_bound() is invoked by the core interrupt code to retrieve the lowest possible Linux interrupt number for dynamically allocated interrupts like MSI. The x86 implementation uses this to exclude the IO/APIC GSI space. This works correctly as long as there is an IO/APIC registered, but returns 0 if not. This has been observed in VMs where the BIOS does not advertise an IO/APIC. 0 is an invalid interrupt number except for the legacy timer interrupt on x86. The return value is unchecked in the core code, so it ends up to allocate interrupt number 0 which is subsequently considered to be invalid by the caller, e.g. the MSI allocation code. The function has already a check for 0 in the case that an IO/APIC is registered, as ioapic_dynirq_base is 0 in case of device tree setups. Consolidate this and zero check for both ioapic_dynirq_base and gsi_top, which is used in the case that no IO/APIC is registered. Fixes: 3e5bedc2c258 ("x86/apic: Fix arch_dynirq_lower_bound() bug for DT enabled machines") Signed-off-by: Saurabh Sengar Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/1679988604-20308-1-git-send-email-ssengar@linux.microsoft.com Signed-off-by: Sasha Levin --- arch/x86/kernel/apic/io_apic.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/arch/x86/kernel/apic/io_apic.c b/arch/x86/kernel/apic/io_apic.c index 1622cff009c9..e4d63392c619 100644 --- a/arch/x86/kernel/apic/io_apic.c +++ b/arch/x86/kernel/apic/io_apic.c @@ -2455,17 +2455,21 @@ static int io_apic_get_redir_entries(int ioapic) unsigned int arch_dynirq_lower_bound(unsigned int from) { + unsigned int ret; + /* * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use * gsi_top if ioapic_dynirq_base hasn't been initialized yet. */ - if (!ioapic_initialized) - return gsi_top; + ret = ioapic_dynirq_base ? : gsi_top; + /* - * For DT enabled machines ioapic_dynirq_base is irrelevant and not - * updated. So simply return @from if ioapic_dynirq_base == 0. + * For DT enabled machines ioapic_dynirq_base is irrelevant and + * always 0. gsi_top can be 0 if there is no IO/APIC registered. + * 0 is an invalid interrupt number for dynamic allocations. Return + * @from instead. */ - return ioapic_dynirq_base ? : from; + return ret ? : from; } #ifdef CONFIG_X86_32 From a687da500464a26e56345dbb11c0fe445fc3414e Mon Sep 17 00:00:00 2001 From: Sumit Garg Date: Thu, 2 Feb 2023 13:01:48 +0530 Subject: [PATCH 065/755] arm64: kgdb: Set PSTATE.SS to 1 to re-enable single-step [ Upstream commit af6c0bd59f4f3ad5daad2f7b777954b1954551d5 ] Currently only the first attempt to single-step has any effect. After that all further stepping remains "stuck" at the same program counter value. Refer to the ARM Architecture Reference Manual (ARM DDI 0487E.a) D2.12, PSTATE.SS=1 should be set at each step before transferring the PE to the 'Active-not-pending' state. The problem here is PSTATE.SS=1 is not set since the second single-step. After the first single-step, the PE transferes to the 'Inactive' state, with PSTATE.SS=0 and MDSCR.SS=1, thus PSTATE.SS won't be set to 1 due to kernel_active_single_step()=true. Then the PE transferes to the 'Active-pending' state when ERET and returns to the debugger by step exception. Before this patch: ================== Entering kdb (current=0xffff3376039f0000, pid 1) on processor 0 due to Keyboard Entry [0]kdb> [0]kdb> [0]kdb> bp write_sysrq_trigger Instruction(i) BP #0 at 0xffffa45c13d09290 (write_sysrq_trigger) is enabled addr at ffffa45c13d09290, hardtype=0 installed=0 [0]kdb> go $ echo h > /proc/sysrq-trigger Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to Breakpoint @ 0xffffad651a309290 [1]kdb> ss Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294 [1]kdb> ss Entering kdb (current=0xffff4f7e453f8000, pid 175) on processor 1 due to SS trap @ 0xffffad651a309294 [1]kdb> After this patch: ================= Entering kdb (current=0xffff6851c39f0000, pid 1) on processor 0 due to Keyboard Entry [0]kdb> bp write_sysrq_trigger Instruction(i) BP #0 at 0xffffc02d2dd09290 (write_sysrq_trigger) is enabled addr at ffffc02d2dd09290, hardtype=0 installed=0 [0]kdb> go $ echo h > /proc/sysrq-trigger Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to Breakpoint @ 0xffffc02d2dd09290 [1]kdb> ss Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09294 [1]kdb> ss Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd09298 [1]kdb> ss Entering kdb (current=0xffff6851c53c1840, pid 174) on processor 1 due to SS trap @ 0xffffc02d2dd0929c [1]kdb> Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support") Co-developed-by: Wei Li Signed-off-by: Wei Li Signed-off-by: Sumit Garg Tested-by: Douglas Anderson Acked-by: Daniel Thompson Tested-by: Daniel Thompson Link: https://lore.kernel.org/r/20230202073148.657746-3-sumit.garg@linaro.org Signed-off-by: Will Deacon Signed-off-by: Sasha Levin --- arch/arm64/include/asm/debug-monitors.h | 1 + arch/arm64/kernel/debug-monitors.c | 5 +++++ arch/arm64/kernel/kgdb.c | 2 ++ 3 files changed, 8 insertions(+) diff --git a/arch/arm64/include/asm/debug-monitors.h b/arch/arm64/include/asm/debug-monitors.h index 0253691c4b3a..bd451732a3af 100644 --- a/arch/arm64/include/asm/debug-monitors.h +++ b/arch/arm64/include/asm/debug-monitors.h @@ -116,6 +116,7 @@ void user_regs_reset_single_step(struct user_pt_regs *regs, void kernel_enable_single_step(struct pt_regs *regs); void kernel_disable_single_step(void); int kernel_active_single_step(void); +void kernel_rewind_single_step(struct pt_regs *regs); #ifdef CONFIG_HAVE_HW_BREAKPOINT int reinstall_suspended_bps(struct pt_regs *regs); diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c index d64a3c1e1b6b..62ab9d4f995e 100644 --- a/arch/arm64/kernel/debug-monitors.c +++ b/arch/arm64/kernel/debug-monitors.c @@ -441,6 +441,11 @@ int kernel_active_single_step(void) } NOKPROBE_SYMBOL(kernel_active_single_step); +void kernel_rewind_single_step(struct pt_regs *regs) +{ + set_regs_spsr_ss(regs); +} + /* ptrace API */ void user_enable_single_step(struct task_struct *task) { diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c index 1a157ca33262..e4e95821b1f6 100644 --- a/arch/arm64/kernel/kgdb.c +++ b/arch/arm64/kernel/kgdb.c @@ -223,6 +223,8 @@ int kgdb_arch_handle_exception(int exception_vector, int signo, */ if (!kernel_active_single_step()) kernel_enable_single_step(linux_regs); + else + kernel_rewind_single_step(linux_regs); err = 0; break; default: From 22d7ec50ffdd49288b17a52f7fe2312e9dbd0390 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Wed, 12 Apr 2023 09:54:39 +0200 Subject: [PATCH 066/755] debugobject: Prevent init race with static objects [ Upstream commit 63a759694eed61025713b3e14dd827c8548daadc ] Statically initialized objects are usually not initialized via the init() function of the subsystem. They are special cased and the subsystem provides a function to validate whether an object which is not yet tracked by debugobjects is statically initialized. This means the object is started to be tracked on first use, e.g. activation. This works perfectly fine, unless there are two concurrent operations on that object. Schspa decoded the problem: T0 T1 debug_object_assert_init(addr) lock_hash_bucket() obj = lookup_object(addr); if (!obj) { unlock_hash_bucket(); - > preemption lock_subsytem_object(addr); activate_object(addr) lock_hash_bucket(); obj = lookup_object(addr); if (!obj) { unlock_hash_bucket(); if (is_static_object(addr)) init_and_track(addr); lock_hash_bucket(); obj = lookup_object(addr); obj->state = ACTIVATED; unlock_hash_bucket(); subsys function modifies content of addr, so static object detection does not longer work. unlock_subsytem_object(addr); if (is_static_object(addr)) <- Fails debugobject emits a warning and invokes the fixup function which reinitializes the already active object in the worst case. This race exists forever, but was never observed until mod_timer() got a debug_object_assert_init() added which is outside of the timer base lock held section right at the beginning of the function to cover the lockless early exit points too. Rework the code so that the lookup, the static object check and the tracking object association happens atomically under the hash bucket lock. This prevents the issue completely as all callers are serialized on the hash bucket lock and therefore cannot observe inconsistent state. Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects") Reported-by: syzbot+5093ba19745994288b53@syzkaller.appspotmail.com Debugged-by: Schspa Shi Signed-off-by: Thomas Gleixner Reviewed-by: Stephen Boyd Link: https://syzkaller.appspot.com/bug?id=22c8a5938eab640d1c6bcc0e3dc7be519d878462 Link: https://lore.kernel.org/lkml/20230303161906.831686-1-schspa@gmail.com Link: https://lore.kernel.org/r/87zg7dzgao.ffs@tglx Signed-off-by: Sasha Levin --- lib/debugobjects.c | 125 ++++++++++++++++++++++++--------------------- 1 file changed, 66 insertions(+), 59 deletions(-) diff --git a/lib/debugobjects.c b/lib/debugobjects.c index 48054dbf1b51..c7cebd2abf48 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -218,10 +218,6 @@ static struct debug_obj *__alloc_object(struct hlist_head *list) return obj; } -/* - * Allocate a new object. If the pool is empty, switch off the debugger. - * Must be called with interrupts disabled. - */ static struct debug_obj * alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr) { @@ -528,11 +524,49 @@ static void debug_object_is_on_stack(void *addr, int onstack) WARN_ON(1); } +static struct debug_obj *lookup_object_or_alloc(void *addr, struct debug_bucket *b, + struct debug_obj_descr *descr, + bool onstack, bool alloc_ifstatic) +{ + struct debug_obj *obj = lookup_object(addr, b); + enum debug_obj_state state = ODEBUG_STATE_NONE; + + if (likely(obj)) + return obj; + + /* + * debug_object_init() unconditionally allocates untracked + * objects. It does not matter whether it is a static object or + * not. + * + * debug_object_assert_init() and debug_object_activate() allow + * allocation only if the descriptor callback confirms that the + * object is static and considered initialized. For non-static + * objects the allocation needs to be done from the fixup callback. + */ + if (unlikely(alloc_ifstatic)) { + if (!descr->is_static_object || !descr->is_static_object(addr)) + return ERR_PTR(-ENOENT); + /* Statically allocated objects are considered initialized */ + state = ODEBUG_STATE_INIT; + } + + obj = alloc_object(addr, b, descr); + if (likely(obj)) { + obj->state = state; + debug_object_is_on_stack(addr, onstack); + return obj; + } + + /* Out of memory. Do the cleanup outside of the locked region */ + debug_objects_enabled = 0; + return NULL; +} + static void __debug_object_init(void *addr, struct debug_obj_descr *descr, int onstack) { enum debug_obj_state state; - bool check_stack = false; struct debug_bucket *db; struct debug_obj *obj; unsigned long flags; @@ -543,16 +577,11 @@ __debug_object_init(void *addr, struct debug_obj_descr *descr, int onstack) raw_spin_lock_irqsave(&db->lock, flags); - obj = lookup_object(addr, db); - if (!obj) { - obj = alloc_object(addr, db, descr); - if (!obj) { - debug_objects_enabled = 0; - raw_spin_unlock_irqrestore(&db->lock, flags); - debug_objects_oom(); - return; - } - check_stack = true; + obj = lookup_object_or_alloc(addr, db, descr, onstack, false); + if (unlikely(!obj)) { + raw_spin_unlock_irqrestore(&db->lock, flags); + debug_objects_oom(); + return; } switch (obj->state) { @@ -578,8 +607,6 @@ __debug_object_init(void *addr, struct debug_obj_descr *descr, int onstack) } raw_spin_unlock_irqrestore(&db->lock, flags); - if (check_stack) - debug_object_is_on_stack(addr, onstack); } /** @@ -619,14 +646,12 @@ EXPORT_SYMBOL_GPL(debug_object_init_on_stack); */ int debug_object_activate(void *addr, struct debug_obj_descr *descr) { + struct debug_obj o = { .object = addr, .state = ODEBUG_STATE_NOTAVAILABLE, .descr = descr }; enum debug_obj_state state; struct debug_bucket *db; struct debug_obj *obj; unsigned long flags; int ret; - struct debug_obj o = { .object = addr, - .state = ODEBUG_STATE_NOTAVAILABLE, - .descr = descr }; if (!debug_objects_enabled) return 0; @@ -635,8 +660,8 @@ int debug_object_activate(void *addr, struct debug_obj_descr *descr) raw_spin_lock_irqsave(&db->lock, flags); - obj = lookup_object(addr, db); - if (obj) { + obj = lookup_object_or_alloc(addr, db, descr, false, true); + if (likely(!IS_ERR_OR_NULL(obj))) { bool print_object = false; switch (obj->state) { @@ -669,24 +694,16 @@ int debug_object_activate(void *addr, struct debug_obj_descr *descr) raw_spin_unlock_irqrestore(&db->lock, flags); - /* - * We are here when a static object is activated. We - * let the type specific code confirm whether this is - * true or not. if true, we just make sure that the - * static object is tracked in the object tracker. If - * not, this must be a bug, so we try to fix it up. - */ - if (descr->is_static_object && descr->is_static_object(addr)) { - /* track this static object */ - debug_object_init(addr, descr); - debug_object_activate(addr, descr); - } else { - debug_print_object(&o, "activate"); - ret = debug_object_fixup(descr->fixup_activate, addr, - ODEBUG_STATE_NOTAVAILABLE); - return ret ? 0 : -EINVAL; + /* If NULL the allocation has hit OOM */ + if (!obj) { + debug_objects_oom(); + return 0; } - return 0; + + /* Object is neither static nor tracked. It's not initialized */ + debug_print_object(&o, "activate"); + ret = debug_object_fixup(descr->fixup_activate, addr, ODEBUG_STATE_NOTAVAILABLE); + return ret ? 0 : -EINVAL; } EXPORT_SYMBOL_GPL(debug_object_activate); @@ -840,6 +857,7 @@ EXPORT_SYMBOL_GPL(debug_object_free); */ void debug_object_assert_init(void *addr, struct debug_obj_descr *descr) { + struct debug_obj o = { .object = addr, .state = ODEBUG_STATE_NOTAVAILABLE, .descr = descr }; struct debug_bucket *db; struct debug_obj *obj; unsigned long flags; @@ -850,31 +868,20 @@ void debug_object_assert_init(void *addr, struct debug_obj_descr *descr) db = get_bucket((unsigned long) addr); raw_spin_lock_irqsave(&db->lock, flags); + obj = lookup_object_or_alloc(addr, db, descr, false, true); + raw_spin_unlock_irqrestore(&db->lock, flags); + if (likely(!IS_ERR_OR_NULL(obj))) + return; - obj = lookup_object(addr, db); + /* If NULL the allocation has hit OOM */ if (!obj) { - struct debug_obj o = { .object = addr, - .state = ODEBUG_STATE_NOTAVAILABLE, - .descr = descr }; - - raw_spin_unlock_irqrestore(&db->lock, flags); - /* - * Maybe the object is static, and we let the type specific - * code confirm. Track this static object if true, else invoke - * fixup. - */ - if (descr->is_static_object && descr->is_static_object(addr)) { - /* Track this static object */ - debug_object_init(addr, descr); - } else { - debug_print_object(&o, "assert_init"); - debug_object_fixup(descr->fixup_assert_init, addr, - ODEBUG_STATE_NOTAVAILABLE); - } + debug_objects_oom(); return; } - raw_spin_unlock_irqrestore(&db->lock, flags); + /* Object is neither tracked nor static. It's not initialized. */ + debug_print_object(&o, "assert_init"); + debug_object_fixup(descr->fixup_assert_init, addr, ODEBUG_STATE_NOTAVAILABLE); } EXPORT_SYMBOL_GPL(debug_object_assert_init); From a23607579f12bc792fa4327544775afe428ac826 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sat, 21 Mar 2020 12:25:58 +0100 Subject: [PATCH 067/755] timekeeping: Split jiffies seqlock [ Upstream commit e5d4d1756b07d9490a0269a9e68c1e05ee1feb9b ] seqlock consists of a sequence counter and a spinlock_t which is used to serialize the writers. spinlock_t is substituted by a "sleeping" spinlock on PREEMPT_RT enabled kernels which breaks the usage in the timekeeping code as the writers are executed in hard interrupt and therefore non-preemptible context even on PREEMPT_RT. The spinlock in seqlock cannot be unconditionally replaced by a raw_spinlock_t as many seqlock users have nesting spinlock sections or other code which is not suitable to run in truly atomic context on RT. Instead of providing a raw_seqlock API for a single use case, open code the seqlock for the jiffies use case and implement it with a raw_spinlock_t and a sequence counter. Signed-off-by: Thomas Gleixner Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20200321113242.120587764@linutronix.de Stable-dep-of: e9523a0d8189 ("tick/common: Align tick period with the HZ tick.") Signed-off-by: Sasha Levin --- kernel/time/jiffies.c | 7 ++++--- kernel/time/tick-common.c | 10 ++++++---- kernel/time/tick-sched.c | 19 ++++++++++++------- kernel/time/timekeeping.c | 6 ++++-- kernel/time/timekeeping.h | 3 ++- 5 files changed, 28 insertions(+), 17 deletions(-) diff --git a/kernel/time/jiffies.c b/kernel/time/jiffies.c index d23b434c2ca7..eddcf4970444 100644 --- a/kernel/time/jiffies.c +++ b/kernel/time/jiffies.c @@ -58,7 +58,8 @@ static struct clocksource clocksource_jiffies = { .max_cycles = 10, }; -__cacheline_aligned_in_smp DEFINE_SEQLOCK(jiffies_lock); +__cacheline_aligned_in_smp DEFINE_RAW_SPINLOCK(jiffies_lock); +__cacheline_aligned_in_smp seqcount_t jiffies_seq; #if (BITS_PER_LONG < 64) u64 get_jiffies_64(void) @@ -67,9 +68,9 @@ u64 get_jiffies_64(void) u64 ret; do { - seq = read_seqbegin(&jiffies_lock); + seq = read_seqcount_begin(&jiffies_seq); ret = jiffies_64; - } while (read_seqretry(&jiffies_lock, seq)); + } while (read_seqcount_retry(&jiffies_seq, seq)); return ret; } EXPORT_SYMBOL(get_jiffies_64); diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 7e5d3524e924..6c9c342dd0e5 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -84,13 +84,15 @@ int tick_is_oneshot_available(void) static void tick_periodic(int cpu) { if (tick_do_timer_cpu == cpu) { - write_seqlock(&jiffies_lock); + raw_spin_lock(&jiffies_lock); + write_seqcount_begin(&jiffies_seq); /* Keep track of the next tick event */ tick_next_period = ktime_add(tick_next_period, tick_period); do_timer(1); - write_sequnlock(&jiffies_lock); + write_seqcount_end(&jiffies_seq); + raw_spin_unlock(&jiffies_lock); update_wall_time(); } @@ -162,9 +164,9 @@ void tick_setup_periodic(struct clock_event_device *dev, int broadcast) ktime_t next; do { - seq = read_seqbegin(&jiffies_lock); + seq = read_seqcount_begin(&jiffies_seq); next = tick_next_period; - } while (read_seqretry(&jiffies_lock, seq)); + } while (read_seqcount_retry(&jiffies_seq, seq)); clockevents_switch_state(dev, CLOCK_EVT_STATE_ONESHOT); diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 5eb04bb59802..88a508cc8925 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -65,7 +65,8 @@ static void tick_do_update_jiffies64(ktime_t now) return; /* Reevaluate with jiffies_lock held */ - write_seqlock(&jiffies_lock); + raw_spin_lock(&jiffies_lock); + write_seqcount_begin(&jiffies_seq); delta = ktime_sub(now, last_jiffies_update); if (delta >= tick_period) { @@ -91,10 +92,12 @@ static void tick_do_update_jiffies64(ktime_t now) /* Keep the tick_next_period variable up to date */ tick_next_period = ktime_add(last_jiffies_update, tick_period); } else { - write_sequnlock(&jiffies_lock); + write_seqcount_end(&jiffies_seq); + raw_spin_unlock(&jiffies_lock); return; } - write_sequnlock(&jiffies_lock); + write_seqcount_end(&jiffies_seq); + raw_spin_unlock(&jiffies_lock); update_wall_time(); } @@ -105,12 +108,14 @@ static ktime_t tick_init_jiffy_update(void) { ktime_t period; - write_seqlock(&jiffies_lock); + raw_spin_lock(&jiffies_lock); + write_seqcount_begin(&jiffies_seq); /* Did we start the jiffies update yet ? */ if (last_jiffies_update == 0) last_jiffies_update = tick_next_period; period = last_jiffies_update; - write_sequnlock(&jiffies_lock); + write_seqcount_end(&jiffies_seq); + raw_spin_unlock(&jiffies_lock); return period; } @@ -665,10 +670,10 @@ static ktime_t tick_nohz_next_event(struct tick_sched *ts, int cpu) /* Read jiffies and the time when jiffies were updated last */ do { - seq = read_seqbegin(&jiffies_lock); + seq = read_seqcount_begin(&jiffies_seq); basemono = last_jiffies_update; basejiff = jiffies; - } while (read_seqretry(&jiffies_lock, seq)); + } while (read_seqcount_retry(&jiffies_seq, seq)); ts->last_jiffies = basejiff; ts->timer_expires_base = basemono; diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 2bc278dd9854..105dd0b66329 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -2415,8 +2415,10 @@ EXPORT_SYMBOL(hardpps); */ void xtime_update(unsigned long ticks) { - write_seqlock(&jiffies_lock); + raw_spin_lock(&jiffies_lock); + write_seqcount_begin(&jiffies_seq); do_timer(ticks); - write_sequnlock(&jiffies_lock); + write_seqcount_end(&jiffies_seq); + raw_spin_unlock(&jiffies_lock); update_wall_time(); } diff --git a/kernel/time/timekeeping.h b/kernel/time/timekeeping.h index 141ab3ab0354..099737f6f10c 100644 --- a/kernel/time/timekeeping.h +++ b/kernel/time/timekeeping.h @@ -25,7 +25,8 @@ static inline void sched_clock_resume(void) { } extern void do_timer(unsigned long ticks); extern void update_wall_time(void); -extern seqlock_t jiffies_lock; +extern raw_spinlock_t jiffies_lock; +extern seqcount_t jiffies_seq; #define CS_NAME_LEN 32 From 746eac77e0087b23723834cc2072e8cdfa0a71af Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 17 Nov 2020 14:19:45 +0100 Subject: [PATCH 068/755] tick/sched: Use tick_next_period for lockless quick check [ Upstream commit 372acbbaa80940189593f9d69c7c069955f24f7a ] No point in doing calculations. tick_next_period = last_jiffies_update + tick_period Just check whether now is before tick_next_period to figure out whether jiffies need an update. Add a comment why the intentional data race in the quick check is safe or not so safe in a 32bit corner case and why we don't worry about it. Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20201117132006.337366695@linutronix.de Stable-dep-of: e9523a0d8189 ("tick/common: Align tick period with the HZ tick.") Signed-off-by: Sasha Levin --- kernel/time/tick-sched.c | 46 ++++++++++++++++++++++++++++------------ 1 file changed, 33 insertions(+), 13 deletions(-) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 88a508cc8925..1dfa53494164 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -57,11 +57,29 @@ static void tick_do_update_jiffies64(ktime_t now) ktime_t delta; /* - * Do a quick check without holding jiffies_lock: - * The READ_ONCE() pairs with two updates done later in this function. + * Do a quick check without holding jiffies_lock. The READ_ONCE() + * pairs with the update done later in this function. + * + * This is also an intentional data race which is even safe on + * 32bit in theory. If there is a concurrent update then the check + * might give a random answer. It does not matter because if it + * returns then the concurrent update is already taking care, if it + * falls through then it will pointlessly contend on jiffies_lock. + * + * Though there is one nasty case on 32bit due to store tearing of + * the 64bit value. If the first 32bit store makes the quick check + * return on all other CPUs and the writing CPU context gets + * delayed to complete the second store (scheduled out on virt) + * then jiffies can become stale for up to ~2^32 nanoseconds + * without noticing. After that point all CPUs will wait for + * jiffies lock. + * + * OTOH, this is not any different than the situation with NOHZ=off + * where one CPU is responsible for updating jiffies and + * timekeeping. If that CPU goes out for lunch then all other CPUs + * will operate on stale jiffies until it decides to come back. */ - delta = ktime_sub(now, READ_ONCE(last_jiffies_update)); - if (delta < tick_period) + if (ktime_before(now, READ_ONCE(tick_next_period))) return; /* Reevaluate with jiffies_lock held */ @@ -72,9 +90,8 @@ static void tick_do_update_jiffies64(ktime_t now) if (delta >= tick_period) { delta = ktime_sub(delta, tick_period); - /* Pairs with the lockless read in this function. */ - WRITE_ONCE(last_jiffies_update, - ktime_add(last_jiffies_update, tick_period)); + last_jiffies_update = ktime_add(last_jiffies_update, + tick_period); /* Slow path for long timeouts */ if (unlikely(delta >= tick_period)) { @@ -82,15 +99,18 @@ static void tick_do_update_jiffies64(ktime_t now) ticks = ktime_divns(delta, incr); - /* Pairs with the lockless read in this function. */ - WRITE_ONCE(last_jiffies_update, - ktime_add_ns(last_jiffies_update, - incr * ticks)); + last_jiffies_update = ktime_add_ns(last_jiffies_update, + incr * ticks); } do_timer(++ticks); - /* Keep the tick_next_period variable up to date */ - tick_next_period = ktime_add(last_jiffies_update, tick_period); + /* + * Keep the tick_next_period variable up to date. + * WRITE_ONCE() pairs with the READ_ONCE() in the lockless + * quick check above. + */ + WRITE_ONCE(tick_next_period, + ktime_add(last_jiffies_update, tick_period)); } else { write_seqcount_end(&jiffies_seq); raw_spin_unlock(&jiffies_lock); From b6fe34d93655931dc969fb84962fcf39bd2a872c Mon Sep 17 00:00:00 2001 From: Yunfeng Ye Date: Tue, 17 Nov 2020 14:19:46 +0100 Subject: [PATCH 069/755] tick/sched: Reduce seqcount held scope in tick_do_update_jiffies64() [ Upstream commit 94ad2e3cedb82af034f6d97c58022f162b669f9b ] If jiffies are up to date already (caller lost the race against another CPU) there is no point to change the sequence count. Doing that just forces other CPUs into the seqcount retry loop in tick_nohz_next_event() for nothing. Just bail out early. [ tglx: Rewrote most of it ] Signed-off-by: Yunfeng Ye Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20201117132006.462195901@linutronix.de Stable-dep-of: e9523a0d8189 ("tick/common: Align tick period with the HZ tick.") Signed-off-by: Sasha Levin --- kernel/time/tick-sched.c | 55 +++++++++++++++++++--------------------- 1 file changed, 26 insertions(+), 29 deletions(-) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 1dfa53494164..eaeeb4bb1f8a 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -84,38 +84,35 @@ static void tick_do_update_jiffies64(ktime_t now) /* Reevaluate with jiffies_lock held */ raw_spin_lock(&jiffies_lock); - write_seqcount_begin(&jiffies_seq); - - delta = ktime_sub(now, last_jiffies_update); - if (delta >= tick_period) { - - delta = ktime_sub(delta, tick_period); - last_jiffies_update = ktime_add(last_jiffies_update, - tick_period); - - /* Slow path for long timeouts */ - if (unlikely(delta >= tick_period)) { - s64 incr = ktime_to_ns(tick_period); - - ticks = ktime_divns(delta, incr); - - last_jiffies_update = ktime_add_ns(last_jiffies_update, - incr * ticks); - } - do_timer(++ticks); - - /* - * Keep the tick_next_period variable up to date. - * WRITE_ONCE() pairs with the READ_ONCE() in the lockless - * quick check above. - */ - WRITE_ONCE(tick_next_period, - ktime_add(last_jiffies_update, tick_period)); - } else { - write_seqcount_end(&jiffies_seq); + if (ktime_before(now, tick_next_period)) { raw_spin_unlock(&jiffies_lock); return; } + + write_seqcount_begin(&jiffies_seq); + + last_jiffies_update = ktime_add(last_jiffies_update, tick_period); + + delta = ktime_sub(now, tick_next_period); + if (unlikely(delta >= tick_period)) { + /* Slow path for long idle sleep times */ + s64 incr = ktime_to_ns(tick_period); + + ticks = ktime_divns(delta, incr); + + last_jiffies_update = ktime_add_ns(last_jiffies_update, + incr * ticks); + } + + do_timer(++ticks); + + /* + * Keep the tick_next_period variable up to date. WRITE_ONCE() + * pairs with the READ_ONCE() in the lockless quick check above. + */ + WRITE_ONCE(tick_next_period, + ktime_add(last_jiffies_update, tick_period)); + write_seqcount_end(&jiffies_seq); raw_spin_unlock(&jiffies_lock); update_wall_time(); From 3df29117d8a6f81368f1f623d3852c0cdd004404 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 17 Nov 2020 14:19:47 +0100 Subject: [PATCH 070/755] tick/sched: Optimize tick_do_update_jiffies64() further [ Upstream commit 7a35bf2a6a871cd0252cd371d741e7d070b53af9 ] Now that it's clear that there is always one tick to account, simplify the calculations some more. Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20201117132006.565663056@linutronix.de Stable-dep-of: e9523a0d8189 ("tick/common: Align tick period with the HZ tick.") Signed-off-by: Sasha Levin --- kernel/time/tick-sched.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index eaeeb4bb1f8a..3b00167656d7 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -53,7 +53,7 @@ static ktime_t last_jiffies_update; */ static void tick_do_update_jiffies64(ktime_t now) { - unsigned long ticks = 0; + unsigned long ticks = 1; ktime_t delta; /* @@ -91,20 +91,21 @@ static void tick_do_update_jiffies64(ktime_t now) write_seqcount_begin(&jiffies_seq); - last_jiffies_update = ktime_add(last_jiffies_update, tick_period); - delta = ktime_sub(now, tick_next_period); if (unlikely(delta >= tick_period)) { /* Slow path for long idle sleep times */ s64 incr = ktime_to_ns(tick_period); - ticks = ktime_divns(delta, incr); + ticks += ktime_divns(delta, incr); last_jiffies_update = ktime_add_ns(last_jiffies_update, incr * ticks); + } else { + last_jiffies_update = ktime_add(last_jiffies_update, + tick_period); } - do_timer(++ticks); + do_timer(ticks); /* * Keep the tick_next_period variable up to date. WRITE_ONCE() From 04be737176e64f1cf0596abd014e814741df24f8 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 17 Nov 2020 14:19:49 +0100 Subject: [PATCH 071/755] tick: Get rid of tick_period [ Upstream commit b996544916429946bf4934c1c01a306d1690972c ] The variable tick_period is initialized to NSEC_PER_TICK / HZ during boot and never updated again. If NSEC_PER_TICK is not an integer multiple of HZ this computation is less accurate than TICK_NSEC which has proper rounding in place. Aside of the inaccuracy there is no reason for having this variable at all. It's just a pointless indirection and all usage sites can just use the TICK_NSEC constant. Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/20201117132006.766643526@linutronix.de Stable-dep-of: e9523a0d8189 ("tick/common: Align tick period with the HZ tick.") Signed-off-by: Sasha Levin --- kernel/time/tick-broadcast.c | 2 +- kernel/time/tick-common.c | 8 +++----- kernel/time/tick-internal.h | 1 - kernel/time/tick-sched.c | 22 +++++++++++----------- 4 files changed, 15 insertions(+), 18 deletions(-) diff --git a/kernel/time/tick-broadcast.c b/kernel/time/tick-broadcast.c index e51778c312f1..ce7339ff10d2 100644 --- a/kernel/time/tick-broadcast.c +++ b/kernel/time/tick-broadcast.c @@ -331,7 +331,7 @@ static void tick_handle_periodic_broadcast(struct clock_event_device *dev) bc_local = tick_do_periodic_broadcast(); if (clockevent_state_oneshot(dev)) { - ktime_t next = ktime_add(dev->next_event, tick_period); + ktime_t next = ktime_add_ns(dev->next_event, TICK_NSEC); clockevents_program_event(dev, next, true); } diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 6c9c342dd0e5..92bf99d558b4 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -30,7 +30,6 @@ DEFINE_PER_CPU(struct tick_device, tick_cpu_device); * Tick next event: keeps track of the tick time */ ktime_t tick_next_period; -ktime_t tick_period; /* * tick_do_timer_cpu is a timer core internal variable which holds the CPU NR @@ -88,7 +87,7 @@ static void tick_periodic(int cpu) write_seqcount_begin(&jiffies_seq); /* Keep track of the next tick event */ - tick_next_period = ktime_add(tick_next_period, tick_period); + tick_next_period = ktime_add_ns(tick_next_period, TICK_NSEC); do_timer(1); write_seqcount_end(&jiffies_seq); @@ -127,7 +126,7 @@ void tick_handle_periodic(struct clock_event_device *dev) * Setup the next period for devices, which do not have * periodic mode: */ - next = ktime_add(next, tick_period); + next = ktime_add_ns(next, TICK_NSEC); if (!clockevents_program_event(dev, next, false)) return; @@ -173,7 +172,7 @@ void tick_setup_periodic(struct clock_event_device *dev, int broadcast) for (;;) { if (!clockevents_program_event(dev, next, false)) return; - next = ktime_add(next, tick_period); + next = ktime_add_ns(next, TICK_NSEC); } } } @@ -220,7 +219,6 @@ static void tick_setup_device(struct tick_device *td, tick_do_timer_cpu = cpu; tick_next_period = ktime_get(); - tick_period = NSEC_PER_SEC / HZ; #ifdef CONFIG_NO_HZ_FULL /* * The boot CPU may be nohz_full, in which case set diff --git a/kernel/time/tick-internal.h b/kernel/time/tick-internal.h index 5294f5b1f955..e61c1244e7d4 100644 --- a/kernel/time/tick-internal.h +++ b/kernel/time/tick-internal.h @@ -15,7 +15,6 @@ DECLARE_PER_CPU(struct tick_device, tick_cpu_device); extern ktime_t tick_next_period; -extern ktime_t tick_period; extern int tick_do_timer_cpu __read_mostly; extern void tick_setup_periodic(struct clock_event_device *dev, int broadcast); diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 3b00167656d7..1b5037ba4ec4 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -92,17 +92,17 @@ static void tick_do_update_jiffies64(ktime_t now) write_seqcount_begin(&jiffies_seq); delta = ktime_sub(now, tick_next_period); - if (unlikely(delta >= tick_period)) { + if (unlikely(delta >= TICK_NSEC)) { /* Slow path for long idle sleep times */ - s64 incr = ktime_to_ns(tick_period); + s64 incr = TICK_NSEC; ticks += ktime_divns(delta, incr); last_jiffies_update = ktime_add_ns(last_jiffies_update, incr * ticks); } else { - last_jiffies_update = ktime_add(last_jiffies_update, - tick_period); + last_jiffies_update = ktime_add_ns(last_jiffies_update, + TICK_NSEC); } do_timer(ticks); @@ -112,7 +112,7 @@ static void tick_do_update_jiffies64(ktime_t now) * pairs with the READ_ONCE() in the lockless quick check above. */ WRITE_ONCE(tick_next_period, - ktime_add(last_jiffies_update, tick_period)); + ktime_add_ns(last_jiffies_update, TICK_NSEC)); write_seqcount_end(&jiffies_seq); raw_spin_unlock(&jiffies_lock); @@ -659,7 +659,7 @@ static void tick_nohz_restart(struct tick_sched *ts, ktime_t now) hrtimer_set_expires(&ts->sched_timer, ts->last_tick); /* Forward the time to expire in the future */ - hrtimer_forward(&ts->sched_timer, now, tick_period); + hrtimer_forward(&ts->sched_timer, now, TICK_NSEC); if (ts->nohz_mode == NOHZ_MODE_HIGHRES) { hrtimer_start_expires(&ts->sched_timer, @@ -1221,7 +1221,7 @@ static void tick_nohz_handler(struct clock_event_device *dev) if (unlikely(ts->tick_stopped)) return; - hrtimer_forward(&ts->sched_timer, now, tick_period); + hrtimer_forward(&ts->sched_timer, now, TICK_NSEC); tick_program_event(hrtimer_get_expires(&ts->sched_timer), 1); } @@ -1258,7 +1258,7 @@ static void tick_nohz_switch_to_nohz(void) next = tick_init_jiffy_update(); hrtimer_set_expires(&ts->sched_timer, next); - hrtimer_forward_now(&ts->sched_timer, tick_period); + hrtimer_forward_now(&ts->sched_timer, TICK_NSEC); tick_program_event(hrtimer_get_expires(&ts->sched_timer), 1); tick_nohz_activate(ts, NOHZ_MODE_LOWRES); } @@ -1324,7 +1324,7 @@ static enum hrtimer_restart tick_sched_timer(struct hrtimer *timer) if (unlikely(ts->tick_stopped)) return HRTIMER_NORESTART; - hrtimer_forward(timer, now, tick_period); + hrtimer_forward(timer, now, TICK_NSEC); return HRTIMER_RESTART; } @@ -1358,13 +1358,13 @@ void tick_setup_sched_timer(void) /* Offset the tick to avert jiffies_lock contention. */ if (sched_skew_tick) { - u64 offset = ktime_to_ns(tick_period) >> 1; + u64 offset = TICK_NSEC >> 1; do_div(offset, num_possible_cpus()); offset *= smp_processor_id(); hrtimer_add_expires_ns(&ts->sched_timer, offset); } - hrtimer_forward(&ts->sched_timer, now, tick_period); + hrtimer_forward(&ts->sched_timer, now, TICK_NSEC); hrtimer_start_expires(&ts->sched_timer, HRTIMER_MODE_ABS_PINNED_HARD); tick_nohz_activate(ts, NOHZ_MODE_HIGHRES); } From a3e7a3d472c2b15440679b670c9c444a5ee64e04 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 18 Apr 2023 14:26:39 +0200 Subject: [PATCH 072/755] tick/common: Align tick period with the HZ tick. [ Upstream commit e9523a0d81899361214d118ad60ef76f0e92f71d ] With HIGHRES enabled tick_sched_timer() is programmed every jiffy to expire the timer_list timers. This timer is programmed accurate in respect to CLOCK_MONOTONIC so that 0 seconds and nanoseconds is the first tick and the next one is 1000/CONFIG_HZ ms later. For HZ=250 it is every 4 ms and so based on the current time the next tick can be computed. This accuracy broke since the commit mentioned below because the jiffy based clocksource is initialized with higher accuracy in read_persistent_wall_and_boot_offset(). This higher accuracy is inherited during the setup in tick_setup_device(). The timer still fires every 4ms with HZ=250 but timer is no longer aligned with CLOCK_MONOTONIC with 0 as it origin but has an offset in the us/ns part of the timestamp. The offset differs with every boot and makes it impossible for user land to align with the tick. Align the tick period with CLOCK_MONOTONIC ensuring that it is always a multiple of 1000/CONFIG_HZ ms. Fixes: 857baa87b6422 ("sched/clock: Enable sched clock early") Reported-by: Gusenleitner Klaus Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/20230406095735.0_14edn3@linutronix.de Link: https://lore.kernel.org/r/20230418122639.ikgfvu3f@linutronix.de Signed-off-by: Sasha Levin --- kernel/time/tick-common.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 92bf99d558b4..2b7448ae5b47 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -216,9 +216,19 @@ static void tick_setup_device(struct tick_device *td, * this cpu: */ if (tick_do_timer_cpu == TICK_DO_TIMER_BOOT) { + ktime_t next_p; + u32 rem; + tick_do_timer_cpu = cpu; - tick_next_period = ktime_get(); + next_p = ktime_get(); + div_u64_rem(next_p, TICK_NSEC, &rem); + if (rem) { + next_p -= rem; + next_p += TICK_NSEC; + } + + tick_next_period = next_p; #ifdef CONFIG_NO_HZ_FULL /* * The boot CPU may be nohz_full, in which case set From 1286c4ce1f01c78f7cd7ff09d50a7d4e623335b3 Mon Sep 17 00:00:00 2001 From: "Alexey V. Vissarionov" Date: Wed, 15 Feb 2023 20:31:37 +0200 Subject: [PATCH 073/755] wifi: ath6kl: minor fix for allocation size [ Upstream commit 778f83f889e7fca37780d9640fcbd0229ae38eaa ] Although the "param" pointer occupies more or equal space compared to "*param", the allocation size should use the size of variable itself. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: bdcd81707973cf8a ("Add ath6kl cleaned up driver") Signed-off-by: Alexey V. Vissarionov Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230117110414.GC12547@altlinux.org Signed-off-by: Sasha Levin --- drivers/net/wireless/ath/ath6kl/bmi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath6kl/bmi.c b/drivers/net/wireless/ath/ath6kl/bmi.c index bde5a10d470c..af98e871199d 100644 --- a/drivers/net/wireless/ath/ath6kl/bmi.c +++ b/drivers/net/wireless/ath/ath6kl/bmi.c @@ -246,7 +246,7 @@ int ath6kl_bmi_execute(struct ath6kl *ar, u32 addr, u32 *param) return -EACCES; } - size = sizeof(cid) + sizeof(addr) + sizeof(param); + size = sizeof(cid) + sizeof(addr) + sizeof(*param); if (size > ar->bmi.max_cmd_size) { WARN_ON(1); return -EINVAL; From d9899318660791141ea6002fda5577b2c5d7386e Mon Sep 17 00:00:00 2001 From: Fedor Pchelkin Date: Thu, 16 Feb 2023 22:23:01 +0300 Subject: [PATCH 074/755] wifi: ath9k: hif_usb: fix memory leak of remain_skbs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 7654cc03eb699297130b693ec34e25f77b17c947 ] hif_dev->remain_skb is allocated and used exclusively in ath9k_hif_usb_rx_stream(). It is implied that an allocated remain_skb is processed and subsequently freed (in error paths) only during the next call of ath9k_hif_usb_rx_stream(). So, if the urbs are deallocated between those two calls due to the device deinitialization or suspend, it is possible that ath9k_hif_usb_rx_stream() is not called next time and the allocated remain_skb is leaked. Our local Syzkaller instance was able to trigger that. remain_skb makes sense when receiving two consecutive urbs which are logically linked together, i.e. a specific data field from the first skb indicates a cached skb to be allocated, memcpy'd with some data and subsequently processed in the next call to ath9k_hif_usb_rx_stream(). Urbs deallocation supposedly makes that link irrelevant so we need to free the cached skb in those cases. Fix the leak by introducing a function to explicitly free remain_skb (if it is not NULL) when the rx urbs have been deallocated. remain_skb is NULL when it has not been allocated at all (hif_dev struct is kzalloced) or when it has been processed in next call to ath9k_hif_usb_rx_stream(). Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: fb9987d0f748 ("ath9k_htc: Support for AR9271 chipset.") Signed-off-by: Fedor Pchelkin Signed-off-by: Alexey Khoroshilov Acked-by: Toke Høiland-Jørgensen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230216192301.171225-1-pchelkin@ispras.ru Signed-off-by: Sasha Levin --- drivers/net/wireless/ath/ath9k/hif_usb.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index e23d58f83dd6..3aa915d21554 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -534,6 +534,24 @@ static struct ath9k_htc_hif hif_usb = { .send = hif_usb_send, }; +/* Need to free remain_skb allocated in ath9k_hif_usb_rx_stream + * in case ath9k_hif_usb_rx_stream wasn't called next time to + * process the buffer and subsequently free it. + */ +static void ath9k_hif_usb_free_rx_remain_skb(struct hif_device_usb *hif_dev) +{ + unsigned long flags; + + spin_lock_irqsave(&hif_dev->rx_lock, flags); + if (hif_dev->remain_skb) { + dev_kfree_skb_any(hif_dev->remain_skb); + hif_dev->remain_skb = NULL; + hif_dev->rx_remain_len = 0; + RX_STAT_INC(hif_dev, skb_dropped); + } + spin_unlock_irqrestore(&hif_dev->rx_lock, flags); +} + static void ath9k_hif_usb_rx_stream(struct hif_device_usb *hif_dev, struct sk_buff *skb) { @@ -868,6 +886,7 @@ err: static void ath9k_hif_usb_dealloc_rx_urbs(struct hif_device_usb *hif_dev) { usb_kill_anchored_urbs(&hif_dev->rx_submitted); + ath9k_hif_usb_free_rx_remain_skb(hif_dev); } static int ath9k_hif_usb_alloc_rx_urbs(struct hif_device_usb *hif_dev) From 8d17563174b0edd7aaa3ec2d84f363b412722489 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 6 Feb 2023 16:15:48 +0300 Subject: [PATCH 075/755] wifi: ath5k: fix an off by one check in ath5k_eeprom_read_freq_list() [ Upstream commit 4c856ee12df85aabd437c3836ed9f68d94268358 ] This loop checks that i < max at the start of loop but then it does i++ which could put it past the end of the array. It's harmless to check again and prevent a potential out of bounds. Fixes: 1048643ea94d ("ath5k: Clean up eeprom parsing and add missing calibration data") Signed-off-by: Dan Carpenter Reviewed-by: Luis Chamberlain Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/Y+D9hPQrHfWBJhXz@kili Signed-off-by: Sasha Levin --- drivers/net/wireless/ath/ath5k/eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/ath/ath5k/eeprom.c b/drivers/net/wireless/ath/ath5k/eeprom.c index 01163b333945..92f5c8e83090 100644 --- a/drivers/net/wireless/ath/ath5k/eeprom.c +++ b/drivers/net/wireless/ath/ath5k/eeprom.c @@ -529,7 +529,7 @@ ath5k_eeprom_read_freq_list(struct ath5k_hw *ah, int *offset, int max, ee->ee_n_piers[mode]++; freq2 = (val >> 8) & 0xff; - if (!freq2) + if (!freq2 || i >= max) break; pc[i++].freq = ath5k_eeprom_bin2freq(ee, From 0d1792c98351b7c8ebdc53d052918e77d1e512c3 Mon Sep 17 00:00:00 2001 From: Fedor Pchelkin Date: Fri, 24 Feb 2023 12:28:05 +0200 Subject: [PATCH 076/755] wifi: ath6kl: reduce WARN to dev_dbg() in callback [ Upstream commit 75c4a8154cb6c7239fb55d5550f481f6765fb83c ] The warn is triggered on a known race condition, documented in the code above the test, that is correctly handled. Using WARN() hinders automated testing. Reducing severity. Fixes: de2070fc4aa7 ("ath6kl: Fix kernel panic on continuous driver load/unload") Reported-and-tested-by: syzbot+555908813b2ea35dae9a@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum Signed-off-by: Fedor Pchelkin Signed-off-by: Alexey Khoroshilov Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230126182431.867984-1-pchelkin@ispras.ru Signed-off-by: Sasha Levin --- drivers/net/wireless/ath/ath6kl/htc_pipe.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c index c68848819a52..9b88d96bfe96 100644 --- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c +++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c @@ -960,8 +960,8 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb, * Thus the possibility of ar->htc_target being NULL * via ath6kl_recv_complete -> ath6kl_usb_io_comp_work. */ - if (WARN_ON_ONCE(!target)) { - ath6kl_err("Target not yet initialized\n"); + if (!target) { + ath6kl_dbg(ATH6KL_DBG_HTC, "Target not yet initialized\n"); status = -EINVAL; goto free_skb; } From 72d5edceb2de7f37854aa24968d5bcef362628ec Mon Sep 17 00:00:00 2001 From: Luis Gerhorst Date: Mon, 27 Feb 2023 16:08:54 +0100 Subject: [PATCH 077/755] tools: bpftool: Remove invalid \' json escape [ Upstream commit c679bbd611c08b0559ffae079330bc4e5574696a ] RFC8259 ("The JavaScript Object Notation (JSON) Data Interchange Format") only specifies \", \\, \/, \b, \f, \n, \r, and \r as valid two-character escape sequences. This does not include \', which is not required in JSON because it exclusively uses double quotes as string separators. Solidus (/) may be escaped, but does not have to. Only reverse solidus (\), double quotes ("), and the control characters have to be escaped. Therefore, with this fix, bpftool correctly supports all valid two-character escape sequences (but still does not support characters that require multi-character escape sequences). Witout this fix, attempting to load a JSON file generated by bpftool using Python 3.10.6's default json.load() may fail with the error "Invalid \escape" if the file contains the invalid escaped single quote (\'). Fixes: b66e907cfee2 ("tools: bpftool: copy JSON writer from iproute2 repository") Signed-off-by: Luis Gerhorst Signed-off-by: Andrii Nakryiko Reviewed-by: Quentin Monnet Link: https://lore.kernel.org/bpf/20230227150853.16863-1-gerhorst@cs.fau.de Signed-off-by: Sasha Levin --- tools/bpf/bpftool/json_writer.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/tools/bpf/bpftool/json_writer.c b/tools/bpf/bpftool/json_writer.c index 86501cd3c763..f2be9ef2c2d5 100644 --- a/tools/bpf/bpftool/json_writer.c +++ b/tools/bpf/bpftool/json_writer.c @@ -80,9 +80,6 @@ static void jsonw_puts(json_writer_t *self, const char *str) case '"': fputs("\\\"", self->out); break; - case '\'': - fputs("\\\'", self->out); - break; default: putc(*str, self->out); } From 743ae09b28ce1fb02b1c12fec7cc9824369ebad9 Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 26 Feb 2023 23:10:03 +0100 Subject: [PATCH 078/755] wifi: rtw88: mac: Return the original error from rtw_pwr_seq_parser() [ Upstream commit b7ed9fa2cb76ca7a3c3cd4a6d35748fe1fbda9f6 ] rtw_pwr_seq_parser() calls rtw_sub_pwr_seq_parser() which can either return -EBUSY, -EINVAL or 0. Propagate the original error code instead of unconditionally returning -EBUSY in case of an error. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Martin Blumenstingl Reviewed-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230226221004.138331-2-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtw88/mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c index b61b073031e5..9a50984fa06c 100644 --- a/drivers/net/wireless/realtek/rtw88/mac.c +++ b/drivers/net/wireless/realtek/rtw88/mac.c @@ -210,7 +210,7 @@ static int rtw_pwr_seq_parser(struct rtw_dev *rtwdev, ret = rtw_sub_pwr_seq_parser(rtwdev, intf_mask, cut_mask, cmd); if (ret) - return -EBUSY; + return ret; idx++; } while (1); From 7160c6940a975481c120bc5347126b581f1604bc Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sun, 26 Feb 2023 23:10:04 +0100 Subject: [PATCH 079/755] wifi: rtw88: mac: Return the original error from rtw_mac_power_switch() [ Upstream commit 15c8e267dfa62f207ee1db666c822324e3362b84 ] rtw_mac_power_switch() calls rtw_pwr_seq_parser() which can return -EINVAL, -EBUSY or 0. Propagate the original error code instead of unconditionally returning -EINVAL in case of an error. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Martin Blumenstingl Reviewed-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230226221004.138331-3-martin.blumenstingl@googlemail.com Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtw88/mac.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtw88/mac.c b/drivers/net/wireless/realtek/rtw88/mac.c index 9a50984fa06c..94e69e97d5f5 100644 --- a/drivers/net/wireless/realtek/rtw88/mac.c +++ b/drivers/net/wireless/realtek/rtw88/mac.c @@ -224,6 +224,7 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on) struct rtw_pwr_seq_cmd **pwr_seq; u8 rpwm; bool cur_pwr; + int ret; rpwm = rtw_read8(rtwdev, rtwdev->hci.rpwm_addr); @@ -245,8 +246,9 @@ static int rtw_mac_power_switch(struct rtw_dev *rtwdev, bool pwr_on) return -EALREADY; pwr_seq = pwr_on ? chip->pwr_on_seq : chip->pwr_off_seq; - if (rtw_pwr_seq_parser(rtwdev, pwr_seq)) - return -EINVAL; + ret = rtw_pwr_seq_parser(rtwdev, pwr_seq); + if (ret) + return ret; return 0; } From 8f851a75bbc77d4e7738c8e369fa163b138d220f Mon Sep 17 00:00:00 2001 From: Alexander Mikhalitsyn Date: Mon, 13 Mar 2023 12:32:11 +0100 Subject: [PATCH 080/755] scm: fix MSG_CTRUNC setting condition for SO_PASSSEC [ Upstream commit a02d83f9947d8f71904eda4de046630c3eb6802c ] Currently, kernel would set MSG_CTRUNC flag if msg_control buffer wasn't provided and SO_PASSCRED was set or if there was pending SCM_RIGHTS. For some reason we have no corresponding check for SO_PASSSEC. In the recvmsg(2) doc we have: MSG_CTRUNC indicates that some control data was discarded due to lack of space in the buffer for ancillary data. So, we need to set MSG_CTRUNC flag for all types of SCM. This change can break applications those don't check MSG_CTRUNC flag. Cc: "David S. Miller" Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: Leon Romanovsky Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Alexander Mikhalitsyn v2: - commit message was rewritten according to Eric's suggestion Acked-by: Paul Moore Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- include/net/scm.h | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/include/net/scm.h b/include/net/scm.h index 1ce365f4c256..585adc1346bd 100644 --- a/include/net/scm.h +++ b/include/net/scm.h @@ -105,16 +105,27 @@ static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct sc } } } + +static inline bool scm_has_secdata(struct socket *sock) +{ + return test_bit(SOCK_PASSSEC, &sock->flags); +} #else static inline void scm_passec(struct socket *sock, struct msghdr *msg, struct scm_cookie *scm) { } + +static inline bool scm_has_secdata(struct socket *sock) +{ + return false; +} #endif /* CONFIG_SECURITY_NETWORK */ static __inline__ void scm_recv(struct socket *sock, struct msghdr *msg, struct scm_cookie *scm, int flags) { if (!msg->msg_control) { - if (test_bit(SOCK_PASSCRED, &sock->flags) || scm->fp) + if (test_bit(SOCK_PASSCRED, &sock->flags) || scm->fp || + scm_has_secdata(sock)) msg->msg_flags |= MSG_CTRUNC; scm_destroy(scm); return; From 47464e0c658a4bf31e85231dc56016a374c6448d Mon Sep 17 00:00:00 2001 From: Vadim Fedorenko Date: Wed, 15 Mar 2023 08:33:02 -0700 Subject: [PATCH 081/755] vlan: partially enable SIOCSHWTSTAMP in container [ Upstream commit 731b73dba359e3ff00517c13aa0daa82b34ff466 ] Setting timestamp filter was explicitly disabled on vlan devices in containers because it might affect other processes on the host. But it's absolutely legit in case when real device is in the same namespace. Fixes: 873017af7784 ("vlan: disable SIOCSHWTSTAMP in container") Signed-off-by: Vadim Fedorenko Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/8021q/vlan_dev.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index 589615ec490b..b10f31f98cb8 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -366,7 +366,7 @@ static int vlan_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) switch (cmd) { case SIOCSHWTSTAMP: - if (!net_eq(dev_net(dev), &init_net)) + if (!net_eq(dev_net(dev), dev_net(real_dev))) break; /* fall through */ case SIOCGMIIPHY: From 4760229b820dfc9f854c4161ea833d55e5d4cdfb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 16 Mar 2023 01:10:06 +0000 Subject: [PATCH 082/755] net/packet: annotate accesses to po->xmit [ Upstream commit b9d83ab8a708f23a4001d60e9d8d0b3be3d9f607 ] po->xmit can be set from setsockopt(PACKET_QDISC_BYPASS), while read locklessly. Use READ_ONCE()/WRITE_ONCE() to avoid potential load/store tearing issues. Fixes: d346a3fae3ff ("packet: introduce PACKET_QDISC_BYPASS socket option") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/packet/af_packet.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 450dc0334772..8636e74557ec 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -266,7 +266,8 @@ static void packet_cached_dev_reset(struct packet_sock *po) static bool packet_use_direct_xmit(const struct packet_sock *po) { - return po->xmit == packet_direct_xmit; + /* Paired with WRITE_ONCE() in packet_setsockopt() */ + return READ_ONCE(po->xmit) == packet_direct_xmit; } static u16 packet_pick_tx_queue(struct sk_buff *skb) @@ -2799,7 +2800,8 @@ tpacket_error: packet_inc_pending(&po->tx_ring); status = TP_STATUS_SEND_REQUEST; - err = po->xmit(skb); + /* Paired with WRITE_ONCE() in packet_setsockopt() */ + err = READ_ONCE(po->xmit)(skb); if (unlikely(err != 0)) { if (err > 0) err = net_xmit_errno(err); @@ -3002,7 +3004,8 @@ static int packet_snd(struct socket *sock, struct msghdr *msg, size_t len) virtio_net_hdr_set_proto(skb, &vnet_hdr); } - err = po->xmit(skb); + /* Paired with WRITE_ONCE() in packet_setsockopt() */ + err = READ_ONCE(po->xmit)(skb); if (unlikely(err != 0)) { if (err > 0) err = net_xmit_errno(err); @@ -3949,7 +3952,8 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv if (copy_from_user(&val, optval, sizeof(val))) return -EFAULT; - po->xmit = val ? packet_direct_xmit : dev_queue_xmit; + /* Paired with all lockless reads of po->xmit */ + WRITE_ONCE(po->xmit, val ? packet_direct_xmit : dev_queue_xmit); return 0; } default: From f3ac72c7ab20c5798300320944a874c9b27ba922 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 16 Mar 2023 01:10:07 +0000 Subject: [PATCH 083/755] net/packet: convert po->origdev to an atomic flag [ Upstream commit ee5675ecdf7a4e713ed21d98a70c2871d6ebed01 ] syzbot/KCAN reported that po->origdev can be read while another thread is changing its value. We can avoid this splat by converting this field to an actual bit. Following patches will convert remaining 1bit fields. Fixes: 80feaacb8a64 ("[AF_PACKET]: Add option to return orig_dev to userspace.") Signed-off-by: Eric Dumazet Reported-by: syzbot Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/packet/af_packet.c | 10 ++++------ net/packet/diag.c | 2 +- net/packet/internal.h | 22 +++++++++++++++++++++- 3 files changed, 26 insertions(+), 8 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 8636e74557ec..0e88a8dd4530 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -2125,7 +2125,7 @@ static int packet_rcv(struct sk_buff *skb, struct net_device *dev, sll = &PACKET_SKB_CB(skb)->sa.ll; sll->sll_hatype = dev->type; sll->sll_pkttype = skb->pkt_type; - if (unlikely(po->origdev)) + if (unlikely(packet_sock_flag(po, PACKET_SOCK_ORIGDEV))) sll->sll_ifindex = orig_dev->ifindex; else sll->sll_ifindex = dev->ifindex; @@ -2393,7 +2393,7 @@ static int tpacket_rcv(struct sk_buff *skb, struct net_device *dev, sll->sll_hatype = dev->type; sll->sll_protocol = skb->protocol; sll->sll_pkttype = skb->pkt_type; - if (unlikely(po->origdev)) + if (unlikely(packet_sock_flag(po, PACKET_SOCK_ORIGDEV))) sll->sll_ifindex = orig_dev->ifindex; else sll->sll_ifindex = dev->ifindex; @@ -3853,9 +3853,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv if (copy_from_user(&val, optval, sizeof(val))) return -EFAULT; - lock_sock(sk); - po->origdev = !!val; - release_sock(sk); + packet_sock_flag_set(po, PACKET_SOCK_ORIGDEV, val); return 0; } case PACKET_VNET_HDR: @@ -4007,7 +4005,7 @@ static int packet_getsockopt(struct socket *sock, int level, int optname, val = po->auxdata; break; case PACKET_ORIGDEV: - val = po->origdev; + val = packet_sock_flag(po, PACKET_SOCK_ORIGDEV); break; case PACKET_VNET_HDR: val = po->has_vnet_hdr; diff --git a/net/packet/diag.c b/net/packet/diag.c index 07812ae5ca07..e1ac9bb375b3 100644 --- a/net/packet/diag.c +++ b/net/packet/diag.c @@ -25,7 +25,7 @@ static int pdiag_put_info(const struct packet_sock *po, struct sk_buff *nlskb) pinfo.pdi_flags |= PDI_RUNNING; if (po->auxdata) pinfo.pdi_flags |= PDI_AUXDATA; - if (po->origdev) + if (packet_sock_flag(po, PACKET_SOCK_ORIGDEV)) pinfo.pdi_flags |= PDI_ORIGDEV; if (po->has_vnet_hdr) pinfo.pdi_flags |= PDI_VNETHDR; diff --git a/net/packet/internal.h b/net/packet/internal.h index 907f4cd2a718..23649010e958 100644 --- a/net/packet/internal.h +++ b/net/packet/internal.h @@ -115,9 +115,9 @@ struct packet_sock { int copy_thresh; spinlock_t bind_lock; struct mutex pg_vec_lock; + unsigned long flags; unsigned int running; /* bind_lock must be held */ unsigned int auxdata:1, /* writer must hold sock lock */ - origdev:1, has_vnet_hdr:1, tp_loss:1, tp_tx_has_off:1; @@ -143,4 +143,24 @@ static struct packet_sock *pkt_sk(struct sock *sk) return (struct packet_sock *)sk; } +enum packet_sock_flags { + PACKET_SOCK_ORIGDEV, +}; + +static inline void packet_sock_flag_set(struct packet_sock *po, + enum packet_sock_flags flag, + bool val) +{ + if (val) + set_bit(flag, &po->flags); + else + clear_bit(flag, &po->flags); +} + +static inline bool packet_sock_flag(const struct packet_sock *po, + enum packet_sock_flags flag) +{ + return test_bit(flag, &po->flags); +} + #endif From 8e402d5198b3762f69e770312739499ad736c3bb Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 16 Mar 2023 01:10:08 +0000 Subject: [PATCH 084/755] net/packet: convert po->auxdata to an atomic flag [ Upstream commit fd53c297aa7b077ae98a3d3d2d3aa278a1686ba6 ] po->auxdata can be read while another thread is changing its value, potentially raising KCSAN splat. Convert it to PACKET_SOCK_AUXDATA flag. Fixes: 8dc419447415 ("[PACKET]: Add optional checksum computation for recvmsg") Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/packet/af_packet.c | 8 +++----- net/packet/diag.c | 2 +- net/packet/internal.h | 4 ++-- 3 files changed, 6 insertions(+), 8 deletions(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 0e88a8dd4530..13666fe787db 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -3456,7 +3456,7 @@ static int packet_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, memcpy(msg->msg_name, &PACKET_SKB_CB(skb)->sa, copy_len); } - if (pkt_sk(sk)->auxdata) { + if (packet_sock_flag(pkt_sk(sk), PACKET_SOCK_AUXDATA)) { struct tpacket_auxdata aux; aux.tp_status = TP_STATUS_USER; @@ -3839,9 +3839,7 @@ packet_setsockopt(struct socket *sock, int level, int optname, char __user *optv if (copy_from_user(&val, optval, sizeof(val))) return -EFAULT; - lock_sock(sk); - po->auxdata = !!val; - release_sock(sk); + packet_sock_flag_set(po, PACKET_SOCK_AUXDATA, val); return 0; } case PACKET_ORIGDEV: @@ -4002,7 +4000,7 @@ static int packet_getsockopt(struct socket *sock, int level, int optname, break; case PACKET_AUXDATA: - val = po->auxdata; + val = packet_sock_flag(po, PACKET_SOCK_AUXDATA); break; case PACKET_ORIGDEV: val = packet_sock_flag(po, PACKET_SOCK_ORIGDEV); diff --git a/net/packet/diag.c b/net/packet/diag.c index e1ac9bb375b3..d704c7bf51b2 100644 --- a/net/packet/diag.c +++ b/net/packet/diag.c @@ -23,7 +23,7 @@ static int pdiag_put_info(const struct packet_sock *po, struct sk_buff *nlskb) pinfo.pdi_flags = 0; if (po->running) pinfo.pdi_flags |= PDI_RUNNING; - if (po->auxdata) + if (packet_sock_flag(po, PACKET_SOCK_AUXDATA)) pinfo.pdi_flags |= PDI_AUXDATA; if (packet_sock_flag(po, PACKET_SOCK_ORIGDEV)) pinfo.pdi_flags |= PDI_ORIGDEV; diff --git a/net/packet/internal.h b/net/packet/internal.h index 23649010e958..2b2b85dadf8e 100644 --- a/net/packet/internal.h +++ b/net/packet/internal.h @@ -117,8 +117,7 @@ struct packet_sock { struct mutex pg_vec_lock; unsigned long flags; unsigned int running; /* bind_lock must be held */ - unsigned int auxdata:1, /* writer must hold sock lock */ - has_vnet_hdr:1, + unsigned int has_vnet_hdr:1, /* writer must hold sock lock */ tp_loss:1, tp_tx_has_off:1; int pressure; @@ -145,6 +144,7 @@ static struct packet_sock *pkt_sk(struct sock *sk) enum packet_sock_flags { PACKET_SOCK_ORIGDEV, + PACKET_SOCK_AUXDATA, }; static inline void packet_sock_flag_set(struct packet_sock *po, From a4245323d272a4a0382dfa4a02f59c5ed8ca2a37 Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Sat, 18 Mar 2023 20:56:19 -0500 Subject: [PATCH 085/755] scsi: target: iscsit: Fix TAS handling during conn cleanup [ Upstream commit cc79da306ebb2edb700c3816b90219223182ac3c ] Fix a bug added in commit f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race"). If CMD_T_TAS is set on the se_cmd we must call iscsit_free_cmd() to do the last put on the cmd and free it, because the connection is down and we will not up sending the response and doing the put from the normal I/O path. Add a check for CMD_T_TAS in iscsit_release_commands_from_conn() so we now detect this case and run iscsit_free_cmd(). Fixes: f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race") Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20230319015620.96006-9-michael.christie@oracle.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/target/iscsi/iscsi_target.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 3403667a9592..8b8afa95fbba 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -4084,9 +4084,12 @@ static void iscsit_release_commands_from_conn(struct iscsi_conn *conn) list_for_each_entry_safe(cmd, cmd_tmp, &tmp_list, i_conn_node) { struct se_cmd *se_cmd = &cmd->se_cmd; - if (se_cmd->se_tfo != NULL) { - spin_lock_irq(&se_cmd->t_state_lock); - if (se_cmd->transport_state & CMD_T_ABORTED) { + if (!se_cmd->se_tfo) + continue; + + spin_lock_irq(&se_cmd->t_state_lock); + if (se_cmd->transport_state & CMD_T_ABORTED) { + if (!(se_cmd->transport_state & CMD_T_TAS)) /* * LIO's abort path owns the cleanup for this, * so put it back on the list and let @@ -4094,11 +4097,10 @@ static void iscsit_release_commands_from_conn(struct iscsi_conn *conn) */ list_move_tail(&cmd->i_conn_node, &conn->conn_cmd_list); - } else { - se_cmd->transport_state |= CMD_T_FABRIC_STOP; - } - spin_unlock_irq(&se_cmd->t_state_lock); + } else { + se_cmd->transport_state |= CMD_T_FABRIC_STOP; } + spin_unlock_irq(&se_cmd->t_state_lock); } spin_unlock_bh(&conn->cmd_lock); From 7a2ae008a53c58eb9e921ca8d07386a8f9930779 Mon Sep 17 00:00:00 2001 From: Danila Chernetsov Date: Fri, 17 Mar 2023 17:51:09 +0000 Subject: [PATCH 086/755] scsi: megaraid: Fix mega_cmd_done() CMDID_INT_CMDS [ Upstream commit 75cb113cd43f06aaf4f1bda0069cfd5b98e909eb ] When cmdid == CMDID_INT_CMDS, the 'cmds' pointer is NULL but is dereferenced below. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 0f2bb84d2a68 ("[SCSI] megaraid: simplify internal command handling") Signed-off-by: Danila Chernetsov Link: https://lore.kernel.org/r/20230317175109.18585-1-listdansp@mail.ru Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/megaraid.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index 8b1ba690039b..8c88190673c2 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -1439,6 +1439,7 @@ mega_cmd_done(adapter_t *adapter, u8 completed[], int nstatus, int status) */ if (cmdid == CMDID_INT_CMDS) { scb = &adapter->int_scb; + cmd = scb->cmd; list_del_init(&scb->list); scb->state = SCB_FREE; From 7c5e804b6d523787f1ff3ac47e1760f8fbc6e218 Mon Sep 17 00:00:00 2001 From: Yangtao Li Date: Tue, 21 Feb 2023 22:45:50 +0800 Subject: [PATCH 087/755] f2fs: handle dqget error in f2fs_transfer_project_quota() [ Upstream commit 8051692f5f23260215bfe9a72e712d93606acc5f ] We should set the error code when dqget() failed. Fixes: 2c1d03056991 ("f2fs: support F2FS_IOC_FS{GET,SET}XATTR") Signed-off-by: Yangtao Li Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin --- fs/f2fs/file.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index ef08ef017030..8d4e66f36cf7 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -2821,15 +2821,16 @@ int f2fs_transfer_project_quota(struct inode *inode, kprojid_t kprojid) struct dquot *transfer_to[MAXQUOTAS] = {}; struct f2fs_sb_info *sbi = F2FS_I_SB(inode); struct super_block *sb = sbi->sb; - int err = 0; + int err; transfer_to[PRJQUOTA] = dqget(sb, make_kqid_projid(kprojid)); - if (!IS_ERR(transfer_to[PRJQUOTA])) { - err = __dquot_transfer(inode, transfer_to); - if (err) - set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR); - dqput(transfer_to[PRJQUOTA]); - } + if (IS_ERR(transfer_to[PRJQUOTA])) + return PTR_ERR(transfer_to[PRJQUOTA]); + + err = __dquot_transfer(inode, transfer_to); + if (err) + set_sbi_flag(sbi, SBI_QUOTA_NEED_REPAIR); + dqput(transfer_to[PRJQUOTA]); return err; } From faec6b8654686ccc2d9e4aa535b8d6d71d3c3120 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 23 Jul 2020 15:42:30 -0500 Subject: [PATCH 088/755] rtlwifi: Start changing RT_TRACE into rtl_dbg [ Upstream commit 78a7245d84300cd616dbce26e6fc42a039a62279 ] The macro name RT_TRACE makes it seem that it is used for tracing, when is actually used for debugging. Change the name to RT_DEBUG. This step creates the new macro while keeping the old RT_TRACE to allow building. It will be removed at the end of the patch series. Signed-off-by: Larry Finger Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200723204244.24457-2-Larry.Finger@lwfinger.net Stable-dep-of: 905a9241e4e8 ("wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()") Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtlwifi/debug.h | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/net/wireless/realtek/rtlwifi/debug.h b/drivers/net/wireless/realtek/rtlwifi/debug.h index 69f169d4d4ae..dbfb4d67ca31 100644 --- a/drivers/net/wireless/realtek/rtlwifi/debug.h +++ b/drivers/net/wireless/realtek/rtlwifi/debug.h @@ -160,6 +160,10 @@ void _rtl_dbg_print_data(struct rtl_priv *rtlpriv, u64 comp, int level, const char *titlestring, const void *hexdata, int hexdatalen); +#define rtl_dbg(rtlpriv, comp, level, fmt, ...) \ + _rtl_dbg_trace(rtlpriv, comp, level, \ + fmt, ##__VA_ARGS__) + #define RT_TRACE(rtlpriv, comp, level, fmt, ...) \ _rtl_dbg_trace(rtlpriv, comp, level, \ fmt, ##__VA_ARGS__) @@ -176,6 +180,13 @@ void _rtl_dbg_print_data(struct rtl_priv *rtlpriv, u64 comp, int level, struct rtl_priv; +__printf(4, 5) +static inline void rtl_dbg(struct rtl_priv *rtlpriv, + u64 comp, int level, + const char *fmt, ...) +{ +} + __printf(4, 5) static inline void RT_TRACE(struct rtl_priv *rtlpriv, u64 comp, int level, From e163e64227ada3dfad99a7df94b771c1d8c4bc6e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 23 Jul 2020 15:42:31 -0500 Subject: [PATCH 089/755] rtlwifi: Replace RT_TRACE with rtl_dbg [ Upstream commit f108a420e50a62e0bc5cdcd7d4a2440986b526e3 ] The macro name RT_TRACE makes it seem that it is used for tracing, when is actually used for debugging. Change the name to rtl_dbg. Any Sparse errors exposed by this change were also fixed. Signed-off-by: Larry Finger Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200723204244.24457-3-Larry.Finger@lwfinger.net Stable-dep-of: 905a9241e4e8 ("wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg()") Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtlwifi/base.c | 144 +++++----- drivers/net/wireless/realtek/rtlwifi/cam.c | 82 +++--- drivers/net/wireless/realtek/rtlwifi/core.c | 259 ++++++++--------- drivers/net/wireless/realtek/rtlwifi/debug.c | 4 +- drivers/net/wireless/realtek/rtlwifi/efuse.c | 72 ++--- drivers/net/wireless/realtek/rtlwifi/pci.c | 282 +++++++++---------- drivers/net/wireless/realtek/rtlwifi/ps.c | 98 +++---- drivers/net/wireless/realtek/rtlwifi/regd.c | 18 +- drivers/net/wireless/realtek/rtlwifi/usb.c | 18 +- 9 files changed, 488 insertions(+), 489 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/base.c b/drivers/net/wireless/realtek/rtlwifi/base.c index c9ad6761032a..8fb0b54738ca 100644 --- a/drivers/net/wireless/realtek/rtlwifi/base.c +++ b/drivers/net/wireless/realtek/rtlwifi/base.c @@ -195,8 +195,8 @@ static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw, } else { if (get_rf_type(rtlphy) == RF_1T2R || get_rf_type(rtlphy) == RF_2T2R) { - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "1T2R or 2T2R\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "1T2R or 2T2R\n"); ht_cap->mcs.rx_mask[0] = 0xFF; ht_cap->mcs.rx_mask[1] = 0xFF; ht_cap->mcs.rx_mask[4] = 0x01; @@ -204,7 +204,7 @@ static void _rtl_init_hw_ht_capab(struct ieee80211_hw *hw, ht_cap->mcs.rx_highest = cpu_to_le16(MAX_BIT_RATE_40MHZ_MCS15); } else if (get_rf_type(rtlphy) == RF_1T1R) { - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "1T1R\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, "1T1R\n"); ht_cap->mcs.rx_mask[0] = 0xFF; ht_cap->mcs.rx_mask[1] = 0x00; @@ -1324,7 +1324,7 @@ bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb) rtlpriv->cfg->ops->chk_switch_dmdp(hw); } if (ieee80211_is_auth(fc)) { - RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, "MAC80211_LINKING\n"); + rtl_dbg(rtlpriv, COMP_SEND, DBG_DMESG, "MAC80211_LINKING\n"); mac->link_state = MAC80211_LINKING; /* Dul mac */ @@ -1385,7 +1385,7 @@ bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx) if (mac->act_scanning) return false; - RT_TRACE(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG, + rtl_dbg(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG, "%s ACT_ADDBAREQ From :%pM\n", is_tx ? "Tx" : "Rx", hdr->addr2); RT_PRINT_DATA(rtlpriv, COMP_INIT, DBG_DMESG, "req\n", @@ -1400,8 +1400,8 @@ bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx) rcu_read_lock(); sta = rtl_find_sta(hw, hdr->addr3); if (sta == NULL) { - RT_TRACE(rtlpriv, COMP_SEND | COMP_RECV, - DBG_DMESG, "sta is NULL\n"); + rtl_dbg(rtlpriv, COMP_SEND | COMP_RECV, + DBG_DMESG, "sta is NULL\n"); rcu_read_unlock(); return true; } @@ -1428,13 +1428,13 @@ bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx) } break; case ACT_ADDBARSP: - RT_TRACE(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG, - "%s ACT_ADDBARSP From :%pM\n", - is_tx ? "Tx" : "Rx", hdr->addr2); + rtl_dbg(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG, + "%s ACT_ADDBARSP From :%pM\n", + is_tx ? "Tx" : "Rx", hdr->addr2); break; case ACT_DELBA: - RT_TRACE(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG, - "ACT_ADDBADEL From :%pM\n", hdr->addr2); + rtl_dbg(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG, + "ACT_ADDBADEL From :%pM\n", hdr->addr2); break; } break; @@ -1519,9 +1519,9 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx, /* 68 : UDP BOOTP client * 67 : UDP BOOTP server */ - RT_TRACE(rtlpriv, (COMP_SEND | COMP_RECV), - DBG_DMESG, "dhcp %s !!\n", - (is_tx) ? "Tx" : "Rx"); + rtl_dbg(rtlpriv, (COMP_SEND | COMP_RECV), + DBG_DMESG, "dhcp %s !!\n", + (is_tx) ? "Tx" : "Rx"); if (is_tx) setup_special_tx(rtlpriv, ppsc, @@ -1540,8 +1540,8 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx, rtlpriv->btcoexist.btc_info.in_4way = true; rtlpriv->btcoexist.btc_info.in_4way_ts = jiffies; - RT_TRACE(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG, - "802.1X %s EAPOL pkt!!\n", (is_tx) ? "Tx" : "Rx"); + rtl_dbg(rtlpriv, (COMP_SEND | COMP_RECV), DBG_DMESG, + "802.1X %s EAPOL pkt!!\n", (is_tx) ? "Tx" : "Rx"); if (is_tx) { rtlpriv->ra.is_special_data = true; @@ -1583,12 +1583,12 @@ static void rtl_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb, info = IEEE80211_SKB_CB(skb); ieee80211_tx_info_clear_status(info); if (ack) { - RT_TRACE(rtlpriv, COMP_TX_REPORT, DBG_LOUD, - "tx report: ack\n"); + rtl_dbg(rtlpriv, COMP_TX_REPORT, DBG_LOUD, + "tx report: ack\n"); info->flags |= IEEE80211_TX_STAT_ACK; } else { - RT_TRACE(rtlpriv, COMP_TX_REPORT, DBG_LOUD, - "tx report: not ack\n"); + rtl_dbg(rtlpriv, COMP_TX_REPORT, DBG_LOUD, + "tx report: not ack\n"); info->flags &= ~IEEE80211_TX_STAT_ACK; } ieee80211_tx_status_irqsafe(hw, skb); @@ -1626,8 +1626,8 @@ static u16 rtl_get_tx_report_sn(struct ieee80211_hw *hw, tx_report->last_sent_time = jiffies; tx_info->sn = sn; tx_info->send_time = tx_report->last_sent_time; - RT_TRACE(rtlpriv, COMP_TX_REPORT, DBG_DMESG, - "Send TX-Report sn=0x%X\n", sn); + rtl_dbg(rtlpriv, COMP_TX_REPORT, DBG_DMESG, + "Send TX-Report sn=0x%X\n", sn); return sn; } @@ -1674,9 +1674,9 @@ void rtl_tx_report_handler(struct ieee80211_hw *hw, u8 *tmp_buf, u8 c2h_cmd_len) break; } } - RT_TRACE(rtlpriv, COMP_TX_REPORT, DBG_DMESG, - "Recv TX-Report st=0x%02X sn=0x%X retry=0x%X\n", - st, sn, retry); + rtl_dbg(rtlpriv, COMP_TX_REPORT, DBG_DMESG, + "Recv TX-Report st=0x%02X sn=0x%X retry=0x%X\n", + st, sn, retry); } EXPORT_SYMBOL_GPL(rtl_tx_report_handler); @@ -1689,9 +1689,9 @@ bool rtl_check_tx_report_acked(struct ieee80211_hw *hw) return true; if (time_before(tx_report->last_sent_time + 3 * HZ, jiffies)) { - RT_TRACE(rtlpriv, COMP_TX_REPORT, DBG_WARNING, - "Check TX-Report timeout!! s_sn=0x%X r_sn=0x%X\n", - tx_report->last_sent_sn, tx_report->last_recv_sn); + rtl_dbg(rtlpriv, COMP_TX_REPORT, DBG_WARNING, + "Check TX-Report timeout!! s_sn=0x%X r_sn=0x%X\n", + tx_report->last_sent_sn, tx_report->last_recv_sn); return true; /* 3 sec. (timeout) seen as acked */ } @@ -1707,8 +1707,8 @@ void rtl_wait_tx_report_acked(struct ieee80211_hw *hw, u32 wait_ms) if (rtl_check_tx_report_acked(hw)) break; usleep_range(1000, 2000); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "Wait 1ms (%d/%d) to disable key.\n", i, wait_ms); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "Wait 1ms (%d/%d) to disable key.\n", i, wait_ms); } } @@ -1770,9 +1770,9 @@ int rtl_tx_agg_start(struct ieee80211_hw *hw, struct ieee80211_vif *vif, return -ENXIO; tid_data = &sta_entry->tids[tid]; - RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, - "on ra = %pM tid = %d seq:%d\n", sta->addr, tid, - *ssn); + rtl_dbg(rtlpriv, COMP_SEND, DBG_DMESG, + "on ra = %pM tid = %d seq:%d\n", sta->addr, tid, + *ssn); tid_data->agg.agg_state = RTL_AGG_START; @@ -1789,8 +1789,8 @@ int rtl_tx_agg_stop(struct ieee80211_hw *hw, struct ieee80211_vif *vif, if (sta == NULL) return -EINVAL; - RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, - "on ra = %pM tid = %d\n", sta->addr, tid); + rtl_dbg(rtlpriv, COMP_SEND, DBG_DMESG, + "on ra = %pM tid = %d\n", sta->addr, tid); if (unlikely(tid >= MAX_TID_COUNT)) return -EINVAL; @@ -1829,8 +1829,8 @@ int rtl_rx_agg_start(struct ieee80211_hw *hw, return -ENXIO; tid_data = &sta_entry->tids[tid]; - RT_TRACE(rtlpriv, COMP_RECV, DBG_DMESG, - "on ra = %pM tid = %d\n", sta->addr, tid); + rtl_dbg(rtlpriv, COMP_RECV, DBG_DMESG, + "on ra = %pM tid = %d\n", sta->addr, tid); tid_data->agg.rx_agg_state = RTL_RX_AGG_START; return 0; @@ -1845,8 +1845,8 @@ int rtl_rx_agg_stop(struct ieee80211_hw *hw, if (sta == NULL) return -EINVAL; - RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, - "on ra = %pM tid = %d\n", sta->addr, tid); + rtl_dbg(rtlpriv, COMP_SEND, DBG_DMESG, + "on ra = %pM tid = %d\n", sta->addr, tid); if (unlikely(tid >= MAX_TID_COUNT)) return -EINVAL; @@ -1866,8 +1866,8 @@ int rtl_tx_agg_oper(struct ieee80211_hw *hw, if (sta == NULL) return -EINVAL; - RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, - "on ra = %pM tid = %d\n", sta->addr, tid); + rtl_dbg(rtlpriv, COMP_SEND, DBG_DMESG, + "on ra = %pM tid = %d\n", sta->addr, tid); if (unlikely(tid >= MAX_TID_COUNT)) return -EINVAL; @@ -1887,9 +1887,9 @@ void rtl_rx_ampdu_apply(struct rtl_priv *rtlpriv) btc_ops->btc_get_ampdu_cfg(rtlpriv, &reject_agg, &ctrl_agg_size, &agg_size); - RT_TRACE(rtlpriv, COMP_BT_COEXIST, DBG_DMESG, - "Set RX AMPDU: coex - reject=%d, ctrl_agg_size=%d, size=%d", - reject_agg, ctrl_agg_size, agg_size); + rtl_dbg(rtlpriv, COMP_BT_COEXIST, DBG_DMESG, + "Set RX AMPDU: coex - reject=%d, ctrl_agg_size=%d, size=%d", + reject_agg, ctrl_agg_size, agg_size); rtlpriv->hw->max_rx_aggregation_subframes = (ctrl_agg_size ? agg_size : IEEE80211_MAX_AMPDU_BUF_HT); @@ -1977,9 +1977,9 @@ void rtl_scan_list_expire(struct ieee80211_hw *hw) list_del(&entry->list); rtlpriv->scan_list.num--; - RT_TRACE(rtlpriv, COMP_SCAN, DBG_LOUD, - "BSSID=%pM is expire in scan list (total=%d)\n", - entry->bssid, rtlpriv->scan_list.num); + rtl_dbg(rtlpriv, COMP_SCAN, DBG_LOUD, + "BSSID=%pM is expire in scan list (total=%d)\n", + entry->bssid, rtlpriv->scan_list.num); kfree(entry); } @@ -2013,9 +2013,9 @@ void rtl_collect_scan_list(struct ieee80211_hw *hw, struct sk_buff *skb) if (memcmp(entry->bssid, hdr->addr3, ETH_ALEN) == 0) { list_del_init(&entry->list); entry_found = true; - RT_TRACE(rtlpriv, COMP_SCAN, DBG_LOUD, - "Update BSSID=%pM to scan list (total=%d)\n", - hdr->addr3, rtlpriv->scan_list.num); + rtl_dbg(rtlpriv, COMP_SCAN, DBG_LOUD, + "Update BSSID=%pM to scan list (total=%d)\n", + hdr->addr3, rtlpriv->scan_list.num); break; } } @@ -2029,9 +2029,9 @@ void rtl_collect_scan_list(struct ieee80211_hw *hw, struct sk_buff *skb) memcpy(entry->bssid, hdr->addr3, ETH_ALEN); rtlpriv->scan_list.num++; - RT_TRACE(rtlpriv, COMP_SCAN, DBG_LOUD, - "Add BSSID=%pM to scan list (total=%d)\n", - hdr->addr3, rtlpriv->scan_list.num); + rtl_dbg(rtlpriv, COMP_SCAN, DBG_LOUD, + "Add BSSID=%pM to scan list (total=%d)\n", + hdr->addr3, rtlpriv->scan_list.num); } entry->age = jiffies; @@ -2191,8 +2191,8 @@ label_lps_done: if ((rtlpriv->link_info.bcn_rx_inperiod + rtlpriv->link_info.num_rx_inperiod) == 0) { rtlpriv->link_info.roam_times++; - RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG, - "AP off for %d s\n", + rtl_dbg(rtlpriv, COMP_ERR, DBG_DMESG, + "AP off for %d s\n", (rtlpriv->link_info.roam_times * 2)); /* if we can't recv beacon for 10s, @@ -2305,11 +2305,11 @@ static void rtl_c2h_content_parsing(struct ieee80211_hw *hw, switch (cmd_id) { case C2H_DBG: - RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "[C2H], C2H_DBG!!\n"); + rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, "[C2H], C2H_DBG!!\n"); break; case C2H_TXBF: - RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, - "[C2H], C2H_TXBF!!\n"); + rtl_dbg(rtlpriv, COMP_FW, DBG_TRACE, + "[C2H], C2H_TXBF!!\n"); break; case C2H_TX_REPORT: rtl_tx_report_handler(hw, cmd_buf, cmd_len); @@ -2319,20 +2319,20 @@ static void rtl_c2h_content_parsing(struct ieee80211_hw *hw, hal_ops->c2h_ra_report_handler(hw, cmd_buf, cmd_len); break; case C2H_BT_INFO: - RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, - "[C2H], C2H_BT_INFO!!\n"); + rtl_dbg(rtlpriv, COMP_FW, DBG_TRACE, + "[C2H], C2H_BT_INFO!!\n"); if (rtlpriv->cfg->ops->get_btc_status()) btc_ops->btc_btinfo_notify(rtlpriv, cmd_buf, cmd_len); break; case C2H_BT_MP: - RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, - "[C2H], C2H_BT_MP!!\n"); + rtl_dbg(rtlpriv, COMP_FW, DBG_TRACE, + "[C2H], C2H_BT_MP!!\n"); if (rtlpriv->cfg->ops->get_btc_status()) btc_ops->btc_btmpinfo_notify(rtlpriv, cmd_buf, cmd_len); break; default: - RT_TRACE(rtlpriv, COMP_FW, DBG_TRACE, - "[C2H], Unknown packet!! cmd_id(%#X)!\n", cmd_id); + rtl_dbg(rtlpriv, COMP_FW, DBG_TRACE, + "[C2H], Unknown packet!! cmd_id(%#X)!\n", cmd_id); break; } } @@ -2356,8 +2356,8 @@ void rtl_c2hcmd_launcher(struct ieee80211_hw *hw, int exec) if (!skb) break; - RT_TRACE(rtlpriv, COMP_FW, DBG_DMESG, "C2H rx_desc_shift=%d\n", - *((u8 *)skb->cb)); + rtl_dbg(rtlpriv, COMP_FW, DBG_DMESG, "C2H rx_desc_shift=%d\n", + *((u8 *)skb->cb)); RT_PRINT_DATA(rtlpriv, COMP_FW, DBG_DMESG, "C2H data: ", skb->data, skb->len); @@ -2702,29 +2702,29 @@ void rtl_recognize_peer(struct ieee80211_hw *hw, u8 *data, unsigned int len) (memcmp(mac->bssid, ap5_6, 3) == 0) || vendor == PEER_ATH) { vendor = PEER_ATH; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "=>ath find\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, "=>ath find\n"); } else if ((memcmp(mac->bssid, ap4_4, 3) == 0) || (memcmp(mac->bssid, ap4_5, 3) == 0) || (memcmp(mac->bssid, ap4_1, 3) == 0) || (memcmp(mac->bssid, ap4_2, 3) == 0) || (memcmp(mac->bssid, ap4_3, 3) == 0) || vendor == PEER_RAL) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "=>ral find\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, "=>ral find\n"); vendor = PEER_RAL; } else if (memcmp(mac->bssid, ap6_1, 3) == 0 || vendor == PEER_CISCO) { vendor = PEER_CISCO; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "=>cisco find\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, "=>cisco find\n"); } else if ((memcmp(mac->bssid, ap3_1, 3) == 0) || (memcmp(mac->bssid, ap3_2, 3) == 0) || (memcmp(mac->bssid, ap3_3, 3) == 0) || vendor == PEER_BROAD) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "=>broad find\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, "=>broad find\n"); vendor = PEER_BROAD; } else if (memcmp(mac->bssid, ap7_1, 3) == 0 || vendor == PEER_MARV) { vendor = PEER_MARV; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "=>marv find\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, "=>marv find\n"); } mac->vendor = vendor; diff --git a/drivers/net/wireless/realtek/rtlwifi/cam.c b/drivers/net/wireless/realtek/rtlwifi/cam.c index bf0e0bb1f99b..7aa28da39409 100644 --- a/drivers/net/wireless/realtek/rtlwifi/cam.c +++ b/drivers/net/wireless/realtek/rtlwifi/cam.c @@ -43,14 +43,14 @@ static void rtl_cam_program_entry(struct ieee80211_hw *hw, u32 entry_no, rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], target_command); - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "WRITE %x: %x\n", - rtlpriv->cfg->maps[WCAMI], target_content); - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "The Key ID is %d\n", entry_no); - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "WRITE %x: %x\n", - rtlpriv->cfg->maps[RWCAM], target_command); + rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, + "WRITE %x: %x\n", + rtlpriv->cfg->maps[WCAMI], target_content); + rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, + "The Key ID is %d\n", entry_no); + rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, + "WRITE %x: %x\n", + rtlpriv->cfg->maps[RWCAM], target_command); } else if (entry_i == 1) { @@ -64,10 +64,10 @@ static void rtl_cam_program_entry(struct ieee80211_hw *hw, u32 entry_no, rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], target_command); - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "WRITE A4: %x\n", target_content); - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "WRITE A0: %x\n", target_command); + rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, + "WRITE A4: %x\n", target_content); + rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, + "WRITE A0: %x\n", target_command); } else { @@ -83,15 +83,15 @@ static void rtl_cam_program_entry(struct ieee80211_hw *hw, u32 entry_no, rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], target_command); - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "WRITE A4: %x\n", target_content); - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "WRITE A0: %x\n", target_command); + rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, + "WRITE A4: %x\n", target_content); + rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, + "WRITE A0: %x\n", target_command); } } - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "after set key, usconfig:%x\n", us_config); + rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, + "after set key, usconfig:%x\n", us_config); } u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr, @@ -101,14 +101,14 @@ u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr, u32 us_config; struct rtl_priv *rtlpriv = rtl_priv(hw); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "EntryNo:%x, ulKeyId=%x, ulEncAlg=%x, ulUseDK=%x MacAddr %pM\n", - ul_entry_idx, ul_key_id, ul_enc_alg, - ul_default_key, mac_addr); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "EntryNo:%x, ulKeyId=%x, ulEncAlg=%x, ulUseDK=%x MacAddr %pM\n", + ul_entry_idx, ul_key_id, ul_enc_alg, + ul_default_key, mac_addr); if (ul_key_id == TOTAL_CAM_ENTRY) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "ulKeyId exceed!\n"); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "ulKeyId exceed!\n"); return 0; } @@ -120,7 +120,7 @@ u8 rtl_cam_add_one_entry(struct ieee80211_hw *hw, u8 *mac_addr, rtl_cam_program_entry(hw, ul_entry_idx, mac_addr, (u8 *)key_content, us_config); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "end\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, "end\n"); return 1; @@ -133,7 +133,7 @@ int rtl_cam_delete_one_entry(struct ieee80211_hw *hw, u32 ul_command; struct rtl_priv *rtlpriv = rtl_priv(hw); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "key_idx:%d\n", ul_key_id); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, "key_idx:%d\n", ul_key_id); ul_command = ul_key_id * CAM_CONTENT_COUNT; ul_command = ul_command | BIT(31) | BIT(16); @@ -141,10 +141,10 @@ int rtl_cam_delete_one_entry(struct ieee80211_hw *hw, rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], 0); rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "rtl_cam_delete_one_entry(): WRITE A4: %x\n", 0); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "rtl_cam_delete_one_entry(): WRITE A0: %x\n", ul_command); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "%s: WRITE A4: %x\n", __func__, 0); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "%s: WRITE A0: %x\n", __func__, ul_command); return 0; @@ -195,10 +195,10 @@ void rtl_cam_mark_invalid(struct ieee80211_hw *hw, u8 uc_index) rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], ul_content); rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "rtl_cam_mark_invalid(): WRITE A4: %x\n", ul_content); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "rtl_cam_mark_invalid(): WRITE A0: %x\n", ul_command); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "%s: WRITE A4: %x\n", __func__, ul_content); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "%s: WRITE A0: %x\n", __func__, ul_command); } EXPORT_SYMBOL(rtl_cam_mark_invalid); @@ -245,12 +245,10 @@ void rtl_cam_empty_entry(struct ieee80211_hw *hw, u8 uc_index) rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[WCAMI], ul_content); rtl_write_dword(rtlpriv, rtlpriv->cfg->maps[RWCAM], ul_command); - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "rtl_cam_empty_entry(): WRITE A4: %x\n", - ul_content); - RT_TRACE(rtlpriv, COMP_SEC, DBG_LOUD, - "rtl_cam_empty_entry(): WRITE A0: %x\n", - ul_command); + rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, + "%s: WRITE A4: %x\n", __func__, ul_content); + rtl_dbg(rtlpriv, COMP_SEC, DBG_LOUD, + "%s: WRITE A0: %x\n", __func__, ul_command); } } @@ -313,8 +311,8 @@ void rtl_cam_del_entry(struct ieee80211_hw *hw, u8 *sta_addr) /* Remove from HW Security CAM */ eth_zero_addr(rtlpriv->sec.hwsec_cam_sta_addr[i]); rtlpriv->sec.hwsec_cam_bitmap &= ~(BIT(0) << i); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "&&&&&&&&&del entry %d\n", i); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "&&&&&&&&&del entry %d\n", i); } } return; diff --git a/drivers/net/wireless/realtek/rtlwifi/core.c b/drivers/net/wireless/realtek/rtlwifi/core.c index f73e690bbe8e..c4c89aade8fb 100644 --- a/drivers/net/wireless/realtek/rtlwifi/core.c +++ b/drivers/net/wireless/realtek/rtlwifi/core.c @@ -76,8 +76,8 @@ static void rtl_fw_do_work(const struct firmware *firmware, void *context, struct rtl_priv *rtlpriv = rtl_priv(hw); int err; - RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD, - "Firmware callback routine entered!\n"); + rtl_dbg(rtlpriv, COMP_ERR, DBG_LOUD, + "Firmware callback routine entered!\n"); complete(&rtlpriv->firmware_loading_complete); if (!firmware) { if (rtlpriv->cfg->alt_fw_name) { @@ -214,8 +214,8 @@ static int rtl_op_add_interface(struct ieee80211_hw *hw, u8 retry_limit = 0x30; if (mac->vif) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "vif has been set!! mac->vif = 0x%p\n", mac->vif); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "vif has been set!! mac->vif = 0x%p\n", mac->vif); return -EOPNOTSUPP; } @@ -230,16 +230,16 @@ static int rtl_op_add_interface(struct ieee80211_hw *hw, /*fall through*/ case NL80211_IFTYPE_STATION: if (mac->beacon_enabled == 1) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "NL80211_IFTYPE_STATION\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "NL80211_IFTYPE_STATION\n"); mac->beacon_enabled = 0; rtlpriv->cfg->ops->update_interrupt_mask(hw, 0, rtlpriv->cfg->maps[RTL_IBSS_INT_MASKS]); } break; case NL80211_IFTYPE_ADHOC: - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "NL80211_IFTYPE_ADHOC\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "NL80211_IFTYPE_ADHOC\n"); mac->link_state = MAC80211_LINKED; rtlpriv->cfg->ops->set_bcn_reg(hw); @@ -256,8 +256,8 @@ static int rtl_op_add_interface(struct ieee80211_hw *hw, mac->p2p = P2P_ROLE_GO; /*fall through*/ case NL80211_IFTYPE_AP: - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "NL80211_IFTYPE_AP\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "NL80211_IFTYPE_AP\n"); mac->link_state = MAC80211_LINKED; rtlpriv->cfg->ops->set_bcn_reg(hw); @@ -271,8 +271,8 @@ static int rtl_op_add_interface(struct ieee80211_hw *hw, retry_limit = 0x07; break; case NL80211_IFTYPE_MESH_POINT: - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "NL80211_IFTYPE_MESH_POINT\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "NL80211_IFTYPE_MESH_POINT\n"); mac->link_state = MAC80211_LINKED; rtlpriv->cfg->ops->set_bcn_reg(hw); @@ -293,8 +293,8 @@ static int rtl_op_add_interface(struct ieee80211_hw *hw, } if (mac->p2p) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "p2p role %x\n", vif->type); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "p2p role %x\n", vif->type); mac->basic_rates = 0xff0;/*disable cck rate for p2p*/ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE, (u8 *)(&mac->basic_rates)); @@ -360,8 +360,8 @@ static int rtl_op_change_interface(struct ieee80211_hw *hw, vif->type = new_type; vif->p2p = p2p; ret = rtl_op_add_interface(hw, vif); - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "p2p %x\n", p2p); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "p2p %x\n", p2p); return ret; } @@ -435,8 +435,8 @@ static void _rtl_add_wowlan_patterns(struct ieee80211_hw *hw, memset(mask, 0, MAX_WOL_BIT_MASK_SIZE); if (patterns[i].pattern_len < 0 || patterns[i].pattern_len > MAX_WOL_PATTERN_SIZE) { - RT_TRACE(rtlpriv, COMP_POWER, DBG_WARNING, - "Pattern[%d] is too long\n", i); + rtl_dbg(rtlpriv, COMP_POWER, DBG_WARNING, + "Pattern[%d] is too long\n", i); continue; } pattern_os = patterns[i].pattern; @@ -515,8 +515,8 @@ static void _rtl_add_wowlan_patterns(struct ieee80211_hw *hw, "pattern to hw\n", content, len); /* 3. calculate crc */ rtl_pattern.crc = _calculate_wol_pattern_crc(content, len); - RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE, - "CRC_Remainder = 0x%x\n", rtl_pattern.crc); + rtl_dbg(rtlpriv, COMP_POWER, DBG_TRACE, + "CRC_Remainder = 0x%x\n", rtl_pattern.crc); /* 4. write crc & mask_for_hw to hw */ rtlpriv->cfg->ops->add_wowlan_pattern(hw, &rtl_pattern, i); @@ -531,7 +531,7 @@ static int rtl_op_suspend(struct ieee80211_hw *hw, struct rtl_hal *rtlhal = rtl_hal(rtlpriv); struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); - RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, "\n"); + rtl_dbg(rtlpriv, COMP_POWER, DBG_DMESG, "\n"); if (WARN_ON(!wow)) return -EINVAL; @@ -557,7 +557,7 @@ static int rtl_op_resume(struct ieee80211_hw *hw) struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); time64_t now; - RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, "\n"); + rtl_dbg(rtlpriv, COMP_POWER, DBG_DMESG, "\n"); rtlhal->driver_is_goingto_unload = false; rtlhal->enter_pnp_sleep = false; rtlhal->wake_from_pnp_sleep = true; @@ -588,8 +588,8 @@ static int rtl_op_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&rtlpriv->locks.conf_mutex); if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) { /* BIT(2)*/ - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "IEEE80211_CONF_CHANGE_LISTEN_INTERVAL\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "IEEE80211_CONF_CHANGE_LISTEN_INTERVAL\n"); } /*For IPS */ @@ -632,9 +632,9 @@ static int rtl_op_config(struct ieee80211_hw *hw, u32 changed) } if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "IEEE80211_CONF_CHANGE_RETRY_LIMITS %x\n", - hw->conf.long_frame_max_tx_count); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "IEEE80211_CONF_CHANGE_RETRY_LIMITS %x\n", + hw->conf.long_frame_max_tx_count); /* brought up everything changes (changed == ~0) indicates first * open, so use our default value instead of that of wiphy. */ @@ -809,13 +809,13 @@ static void rtl_op_configure_filter(struct ieee80211_hw *hw, if (*new_flags & FIF_ALLMULTI) { mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AM] | rtlpriv->cfg->maps[MAC_RCR_AB]; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "Enable receive multicast frame\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "Enable receive multicast frame\n"); } else { mac->rx_conf &= ~(rtlpriv->cfg->maps[MAC_RCR_AM] | rtlpriv->cfg->maps[MAC_RCR_AB]); - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "Disable receive multicast frame\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "Disable receive multicast frame\n"); } update_rcr = true; } @@ -823,12 +823,12 @@ static void rtl_op_configure_filter(struct ieee80211_hw *hw, if (changed_flags & FIF_FCSFAIL) { if (*new_flags & FIF_FCSFAIL) { mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACRC32]; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "Enable receive FCS error frame\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "Enable receive FCS error frame\n"); } else { mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACRC32]; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "Disable receive FCS error frame\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "Disable receive FCS error frame\n"); } if (!update_rcr) update_rcr = true; @@ -855,12 +855,12 @@ static void rtl_op_configure_filter(struct ieee80211_hw *hw, if (*new_flags & FIF_CONTROL) { mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_ACF]; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "Enable receive control frame.\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "Enable receive control frame.\n"); } else { mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_ACF]; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "Disable receive control frame.\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "Disable receive control frame.\n"); } if (!update_rcr) update_rcr = true; @@ -869,12 +869,12 @@ static void rtl_op_configure_filter(struct ieee80211_hw *hw, if (changed_flags & FIF_OTHER_BSS) { if (*new_flags & FIF_OTHER_BSS) { mac->rx_conf |= rtlpriv->cfg->maps[MAC_RCR_AAP]; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "Enable receive other BSS's frame.\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "Enable receive other BSS's frame.\n"); } else { mac->rx_conf &= ~rtlpriv->cfg->maps[MAC_RCR_AAP]; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "Disable receive other BSS's frame.\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "Disable receive other BSS's frame.\n"); } if (!update_rcr) update_rcr = true; @@ -923,7 +923,7 @@ static int rtl_op_sta_add(struct ieee80211_hw *hw, sta->supp_rates[0] &= 0xfffffff0; memcpy(sta_entry->mac_addr, sta->addr, ETH_ALEN); - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_DMESG, "Add sta addr is %pM\n", sta->addr); rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0, true); } @@ -939,8 +939,8 @@ static int rtl_op_sta_remove(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry; if (sta) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, - "Remove sta addr is %pM\n", sta->addr); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_DMESG, + "Remove sta addr is %pM\n", sta->addr); sta_entry = (struct rtl_sta_info *)sta->drv_priv; sta_entry->wireless_mode = 0; sta_entry->ratr_index = 0; @@ -988,8 +988,8 @@ static int rtl_op_conf_tx(struct ieee80211_hw *hw, int aci; if (queue >= AC_MAX) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "queue number %d is incorrect!\n", queue); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "queue number %d is incorrect!\n", queue); return -EINVAL; } @@ -1034,8 +1034,8 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, (changed & BSS_CHANGED_BEACON_ENABLED && bss_conf->enable_beacon)) { if (mac->beacon_enabled == 0) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, - "BSS_CHANGED_BEACON_ENABLED\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_DMESG, + "BSS_CHANGED_BEACON_ENABLED\n"); /*start hw beacon interrupt. */ /*rtlpriv->cfg->ops->set_bcn_reg(hw); */ @@ -1052,8 +1052,8 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, if ((changed & BSS_CHANGED_BEACON_ENABLED && !bss_conf->enable_beacon)) { if (mac->beacon_enabled == 1) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, - "ADHOC DISABLE BEACON\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_DMESG, + "ADHOC DISABLE BEACON\n"); mac->beacon_enabled = 0; rtlpriv->cfg->ops->update_interrupt_mask(hw, 0, @@ -1062,8 +1062,8 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, } } if (changed & BSS_CHANGED_BEACON_INT) { - RT_TRACE(rtlpriv, COMP_BEACON, DBG_TRACE, - "BSS_CHANGED_BEACON_INT\n"); + rtl_dbg(rtlpriv, COMP_BEACON, DBG_TRACE, + "BSS_CHANGED_BEACON_INT\n"); mac->beacon_interval = bss_conf->beacon_int; rtlpriv->cfg->ops->set_bcn_intv(hw); } @@ -1102,8 +1102,8 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, rcu_read_unlock(); goto out; } - RT_TRACE(rtlpriv, COMP_EASY_CONCURRENT, DBG_LOUD, - "send PS STATIC frame\n"); + rtl_dbg(rtlpriv, COMP_EASY_CONCURRENT, DBG_LOUD, + "send PS STATIC frame\n"); if (rtlpriv->dm.supp_phymode_switch) { if (sta->ht_cap.ht_supported) rtl_send_smps_action(hw, sta, @@ -1143,8 +1143,8 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, HW_VAR_KEEP_ALIVE, (u8 *)(&keep_alive)); - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, - "BSS_CHANGED_ASSOC\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_DMESG, + "BSS_CHANGED_ASSOC\n"); } else { struct cfg80211_bss *bss = NULL; @@ -1161,14 +1161,14 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, IEEE80211_BSS_TYPE_ESS, IEEE80211_PRIVACY_OFF); - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, - "bssid = %pMF\n", mac->bssid); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_DMESG, + "bssid = %pMF\n", mac->bssid); if (bss) { cfg80211_unlink_bss(hw->wiphy, bss); cfg80211_put_bss(hw->wiphy, bss); - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, - "cfg80211_unlink !!\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_DMESG, + "cfg80211_unlink !!\n"); } eth_zero_addr(mac->bssid); @@ -1179,8 +1179,8 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, if (rtlpriv->cfg->ops->chk_switch_dmdp) rtlpriv->cfg->ops->chk_switch_dmdp(hw); } - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, - "BSS_CHANGED_UN_ASSOC\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_DMESG, + "BSS_CHANGED_UN_ASSOC\n"); } rtlpriv->cfg->ops->set_network_type(hw, vif->type); /* For FW LPS: @@ -1198,14 +1198,14 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, } if (changed & BSS_CHANGED_ERP_CTS_PROT) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, - "BSS_CHANGED_ERP_CTS_PROT\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_TRACE, + "BSS_CHANGED_ERP_CTS_PROT\n"); mac->use_cts_protect = bss_conf->use_cts_prot; } if (changed & BSS_CHANGED_ERP_PREAMBLE) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, - "BSS_CHANGED_ERP_PREAMBLE use short preamble:%x\n", + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, + "BSS_CHANGED_ERP_PREAMBLE use short preamble:%x\n", bss_conf->use_short_preamble); mac->short_preamble = bss_conf->use_short_preamble; @@ -1214,8 +1214,8 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, } if (changed & BSS_CHANGED_ERP_SLOT) { - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, - "BSS_CHANGED_ERP_SLOT\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_TRACE, + "BSS_CHANGED_ERP_SLOT\n"); if (bss_conf->use_short_slot) mac->slot_time = RTL_SLOT_TIME_9; @@ -1229,8 +1229,8 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_HT) { struct ieee80211_sta *sta = NULL; - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, - "BSS_CHANGED_HT\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_TRACE, + "BSS_CHANGED_HT\n"); rcu_read_lock(); sta = ieee80211_find_sta(vif, (u8 *)bss_conf->bssid); @@ -1261,8 +1261,8 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BSSID, (u8 *)bss_conf->bssid); - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, - "bssid: %pM\n", bss_conf->bssid); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_DMESG, + "bssid: %pM\n", bss_conf->bssid); mac->vendor = PEER_UNKNOWN; memcpy(mac->bssid, bss_conf->bssid, ETH_ALEN); @@ -1393,27 +1393,27 @@ static int rtl_op_ampdu_action(struct ieee80211_hw *hw, switch (action) { case IEEE80211_AMPDU_TX_START: - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, - "IEEE80211_AMPDU_TX_START: TID:%d\n", tid); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_TRACE, + "IEEE80211_AMPDU_TX_START: TID:%d\n", tid); return rtl_tx_agg_start(hw, vif, sta, tid, ssn); case IEEE80211_AMPDU_TX_STOP_CONT: case IEEE80211_AMPDU_TX_STOP_FLUSH: case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT: - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, - "IEEE80211_AMPDU_TX_STOP: TID:%d\n", tid); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_TRACE, + "IEEE80211_AMPDU_TX_STOP: TID:%d\n", tid); return rtl_tx_agg_stop(hw, vif, sta, tid); case IEEE80211_AMPDU_TX_OPERATIONAL: - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, - "IEEE80211_AMPDU_TX_OPERATIONAL:TID:%d\n", tid); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_TRACE, + "IEEE80211_AMPDU_TX_OPERATIONAL:TID:%d\n", tid); rtl_tx_agg_oper(hw, sta, tid); break; case IEEE80211_AMPDU_RX_START: - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, - "IEEE80211_AMPDU_RX_START:TID:%d\n", tid); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_TRACE, + "IEEE80211_AMPDU_RX_START:TID:%d\n", tid); return rtl_rx_agg_start(hw, sta, tid); case IEEE80211_AMPDU_RX_STOP: - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE, - "IEEE80211_AMPDU_RX_STOP:TID:%d\n", tid); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_TRACE, + "IEEE80211_AMPDU_RX_STOP:TID:%d\n", tid); return rtl_rx_agg_stop(hw, sta, tid); default: pr_err("IEEE80211_AMPDU_ERR!!!!:\n"); @@ -1429,7 +1429,7 @@ static void rtl_op_sw_scan_start(struct ieee80211_hw *hw, struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, "\n"); mac->act_scanning = true; if (rtlpriv->link_info.higher_busytraffic) { mac->skip_scan = true; @@ -1467,7 +1467,7 @@ static void rtl_op_sw_scan_complete(struct ieee80211_hw *hw, struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); - RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD, "\n"); + rtl_dbg(rtlpriv, COMP_MAC80211, DBG_LOUD, "\n"); mac->act_scanning = false; mac->skip_scan = false; @@ -1517,8 +1517,8 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, rtlpriv->btcoexist.btc_info.in_4way = false; if (rtlpriv->cfg->mod_params->sw_crypto || rtlpriv->sec.use_sw_sec) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "not open hw encryption\n"); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "not open hw encryption\n"); return -ENOSPC; /*User disabled HW-crypto */ } /* To support IBSS, use sw-crypto for GTK */ @@ -1526,10 +1526,10 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, vif->type == NL80211_IFTYPE_MESH_POINT) && !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) return -ENOSPC; - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "%s hardware based encryption for keyidx: %d, mac: %pM\n", - cmd == SET_KEY ? "Using" : "Disabling", key->keyidx, - sta ? sta->addr : bcast_addr); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "%s hardware based encryption for keyidx: %d, mac: %pM\n", + cmd == SET_KEY ? "Using" : "Disabling", key->keyidx, + sta ? sta->addr : bcast_addr); rtlpriv->sec.being_setkey = true; rtl_ips_nic_on(hw); mutex_lock(&rtlpriv->locks.conf_mutex); @@ -1538,28 +1538,28 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, switch (key->cipher) { case WLAN_CIPHER_SUITE_WEP40: key_type = WEP40_ENCRYPTION; - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:WEP40\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, "alg:WEP40\n"); break; case WLAN_CIPHER_SUITE_WEP104: - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:WEP104\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, "alg:WEP104\n"); key_type = WEP104_ENCRYPTION; break; case WLAN_CIPHER_SUITE_TKIP: key_type = TKIP_ENCRYPTION; - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:TKIP\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, "alg:TKIP\n"); break; case WLAN_CIPHER_SUITE_CCMP: key_type = AESCCMP_ENCRYPTION; - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:CCMP\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, "alg:CCMP\n"); break; case WLAN_CIPHER_SUITE_AES_CMAC: /* HW don't support CMAC encryption, * use software CMAC encryption */ key_type = AESCMAC_ENCRYPTION; - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, "alg:CMAC\n"); - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "HW don't support CMAC encryption, use software CMAC encryption\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, "alg:CMAC\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "HW don't support CMAC encryption, use software CMAC encryption\n"); err = -EOPNOTSUPP; goto out_unlock; default: @@ -1605,9 +1605,9 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, key_type == WEP104_ENCRYPTION)) wep_only = true; rtlpriv->sec.pairwise_enc_algorithm = key_type; - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "set enable_hw_sec, key_type:%x(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)\n", - key_type); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "set enable_hw_sec, key_type:%x(OPEN:0 WEP40:1 TKIP:2 AES:4 WEP104:5)\n", + key_type); rtlpriv->cfg->ops->enable_hw_sec(hw); } } @@ -1615,8 +1615,8 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, switch (cmd) { case SET_KEY: if (wep_only) { - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "set WEP(group/pairwise) key\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "set WEP(group/pairwise) key\n"); /* Pairwise key with an assigned MAC address. */ rtlpriv->sec.pairwise_enc_algorithm = key_type; rtlpriv->sec.group_enc_algorithm = key_type; @@ -1626,8 +1626,8 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, rtlpriv->sec.key_len[key_idx] = key->keylen; eth_zero_addr(mac_addr); } else if (group_key) { /* group key */ - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "set group key\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "set group key\n"); /* group key */ rtlpriv->sec.group_enc_algorithm = key_type; /*set local buf about group key. */ @@ -1636,8 +1636,8 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, rtlpriv->sec.key_len[key_idx] = key->keylen; memcpy(mac_addr, bcast_addr, ETH_ALEN); } else { /* pairwise key */ - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "set pairwise key\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "set pairwise key\n"); if (!sta) { WARN_ONCE(true, "rtlwifi: pairwise key without mac_addr\n"); @@ -1669,8 +1669,8 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, key->flags |= IEEE80211_KEY_FLAG_SW_MGMT_TX; break; case DISABLE_KEY: - RT_TRACE(rtlpriv, COMP_SEC, DBG_DMESG, - "disable key delete one entry\n"); + rtl_dbg(rtlpriv, COMP_SEC, DBG_DMESG, + "disable key delete one entry\n"); /*set local buf about wep key. */ if (vif->type == NL80211_IFTYPE_AP || vif->type == NL80211_IFTYPE_MESH_POINT) { @@ -1718,9 +1718,9 @@ static void rtl_op_rfkill_poll(struct ieee80211_hw *hw) if (unlikely(radio_state != rtlpriv->rfkill.rfkill_state)) { rtlpriv->rfkill.rfkill_state = radio_state; - RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, - "wireless radio switch turned %s\n", - radio_state ? "on" : "off"); + rtl_dbg(rtlpriv, COMP_RF, DBG_DMESG, + "wireless radio switch turned %s\n", + radio_state ? "on" : "off"); blocked = (rtlpriv->rfkill.rfkill_state == 1) ? 0 : 1; wiphy_rfkill_set_hw_state(hw->wiphy, blocked); @@ -1765,26 +1765,27 @@ bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version, do { cfg_cmd = pwrcfgcmd[ary_idx]; - RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, - "rtl_hal_pwrseqcmdparsing(): offset(%#x),cut_msk(%#x), famsk(%#x), interface_msk(%#x), base(%#x), cmd(%#x), msk(%#x), value(%#x)\n", - GET_PWR_CFG_OFFSET(cfg_cmd), - GET_PWR_CFG_CUT_MASK(cfg_cmd), - GET_PWR_CFG_FAB_MASK(cfg_cmd), - GET_PWR_CFG_INTF_MASK(cfg_cmd), - GET_PWR_CFG_BASE(cfg_cmd), GET_PWR_CFG_CMD(cfg_cmd), - GET_PWR_CFG_MASK(cfg_cmd), GET_PWR_CFG_VALUE(cfg_cmd)); + rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, + "%s: offset(%#x),cut_msk(%#x), famsk(%#x), interface_msk(%#x), base(%#x), cmd(%#x), msk(%#x), value(%#x)\n", + __func__, + GET_PWR_CFG_OFFSET(cfg_cmd), + GET_PWR_CFG_CUT_MASK(cfg_cmd), + GET_PWR_CFG_FAB_MASK(cfg_cmd), + GET_PWR_CFG_INTF_MASK(cfg_cmd), + GET_PWR_CFG_BASE(cfg_cmd), GET_PWR_CFG_CMD(cfg_cmd), + GET_PWR_CFG_MASK(cfg_cmd), GET_PWR_CFG_VALUE(cfg_cmd)); if ((GET_PWR_CFG_FAB_MASK(cfg_cmd)&faversion) && (GET_PWR_CFG_CUT_MASK(cfg_cmd)&cut_version) && (GET_PWR_CFG_INTF_MASK(cfg_cmd)&interface_type)) { switch (GET_PWR_CFG_CMD(cfg_cmd)) { case PWR_CMD_READ: - RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, "rtl_hal_pwrseqcmdparsing(): PWR_CMD_READ\n"); break; case PWR_CMD_WRITE: - RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, - "%s(): PWR_CMD_WRITE\n", __func__); + rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, + "%s(): PWR_CMD_WRITE\n", __func__); offset = GET_PWR_CFG_OFFSET(cfg_cmd); /*Read the value from system register*/ @@ -1797,7 +1798,7 @@ bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version, rtl_write_byte(rtlpriv, offset, value); break; case PWR_CMD_POLLING: - RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, + rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, "rtl_hal_pwrseqcmdparsing(): PWR_CMD_POLLING\n"); polling_bit = false; offset = GET_PWR_CFG_OFFSET(cfg_cmd); @@ -1818,8 +1819,8 @@ bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version, } while (!polling_bit); break; case PWR_CMD_DELAY: - RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, - "rtl_hal_pwrseqcmdparsing(): PWR_CMD_DELAY\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, + "%s: PWR_CMD_DELAY\n", __func__); if (GET_PWR_CFG_VALUE(cfg_cmd) == PWRSEQ_DELAY_US) udelay(GET_PWR_CFG_OFFSET(cfg_cmd)); @@ -1827,8 +1828,8 @@ bool rtl_hal_pwrseqcmdparsing(struct rtl_priv *rtlpriv, u8 cut_version, mdelay(GET_PWR_CFG_OFFSET(cfg_cmd)); break; case PWR_CMD_END: - RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, - "rtl_hal_pwrseqcmdparsing(): PWR_CMD_END\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, + "%s: PWR_CMD_END\n", __func__); return true; default: WARN_ONCE(true, diff --git a/drivers/net/wireless/realtek/rtlwifi/debug.c b/drivers/net/wireless/realtek/rtlwifi/debug.c index ec0da33da4f8..a7a5d8fa3cc0 100644 --- a/drivers/net/wireless/realtek/rtlwifi/debug.c +++ b/drivers/net/wireless/realtek/rtlwifi/debug.c @@ -404,8 +404,8 @@ static ssize_t rtl_debugfs_set_write_rfreg(struct file *filp, &path, &addr, &bitmask, &data); if (num != 4) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG, - "Format is \n"); + rtl_dbg(rtlpriv, COMP_ERR, DBG_DMESG, + "Format is \n"); return count; } diff --git a/drivers/net/wireless/realtek/rtlwifi/efuse.c b/drivers/net/wireless/realtek/rtlwifi/efuse.c index 264667203f6f..305d43818018 100644 --- a/drivers/net/wireless/realtek/rtlwifi/efuse.c +++ b/drivers/net/wireless/realtek/rtlwifi/efuse.c @@ -120,8 +120,8 @@ void efuse_write_1byte(struct ieee80211_hw *hw, u16 address, u8 value) const u32 efuse_len = rtlpriv->cfg->maps[EFUSE_REAL_CONTENT_SIZE]; - RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, "Addr=%x Data =%x\n", - address, value); + rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, "Addr=%x Data =%x\n", + address, value); if (address < efuse_len) { rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL], value); @@ -211,9 +211,9 @@ void read_efuse(struct ieee80211_hw *hw, u16 _offset, u16 _size_byte, u8 *pbuf) u8 efuse_usage; if ((_offset + _size_byte) > rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]) { - RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, - "read_efuse(): Invalid offset(%#x) with read bytes(%#x)!!\n", - _offset, _size_byte); + rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, + "%s: Invalid offset(%#x) with read bytes(%#x)!!\n", + __func__, _offset, _size_byte); return; } @@ -376,9 +376,9 @@ bool efuse_shadow_update_chk(struct ieee80211_hw *hw) (EFUSE_MAX_SIZE - rtlpriv->cfg->maps[EFUSE_OOB_PROTECT_BYTES_LEN])) result = false; - RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, - "efuse_shadow_update_chk(): totalbytes(%#x), hdr_num(%#x), words_need(%#x), efuse_used(%d)\n", - totalbytes, hdr_num, words_need, efuse_used); + rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, + "%s: totalbytes(%#x), hdr_num(%#x), words_need(%#x), efuse_used(%d)\n", + __func__, totalbytes, hdr_num, words_need, efuse_used); return result; } @@ -416,7 +416,7 @@ bool efuse_shadow_update(struct ieee80211_hw *hw) u8 word_en = 0x0F; u8 first_pg = false; - RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, "\n"); + rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, "\n"); if (!efuse_shadow_update_chk(hw)) { efuse_read_all_map(hw, &rtlefuse->efuse_map[EFUSE_INIT_MAP][0]); @@ -424,8 +424,8 @@ bool efuse_shadow_update(struct ieee80211_hw *hw) &rtlefuse->efuse_map[EFUSE_INIT_MAP][0], rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]); - RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, - "efuse out of capacity!!\n"); + rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, + "efuse out of capacity!!\n"); return false; } efuse_power_switch(hw, true, true); @@ -464,8 +464,8 @@ bool efuse_shadow_update(struct ieee80211_hw *hw) if (!efuse_pg_packet_write(hw, (u8) offset, word_en, tmpdata)) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "PG section(%#x) fail!!\n", offset); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "PG section(%#x) fail!!\n", offset); break; } } @@ -478,7 +478,7 @@ bool efuse_shadow_update(struct ieee80211_hw *hw) &rtlefuse->efuse_map[EFUSE_INIT_MAP][0], rtlpriv->cfg->maps[EFUSE_HWSET_MAX_SIZE]); - RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, "\n"); + rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, "\n"); return true; } @@ -616,8 +616,8 @@ static int efuse_one_byte_write(struct ieee80211_hw *hw, u16 addr, u8 data) struct rtl_priv *rtlpriv = rtl_priv(hw); u8 tmpidx = 0; - RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, - "Addr = %x Data=%x\n", addr, data); + rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, + "Addr = %x Data=%x\n", addr, data); rtl_write_byte(rtlpriv, rtlpriv->cfg->maps[EFUSE_CTRL] + 1, (u8) (addr & 0xff)); @@ -997,8 +997,8 @@ static int efuse_pg_packet_write(struct ieee80211_hw *hw, if (efuse_addr >= (EFUSE_MAX_SIZE - rtlpriv->cfg->maps[EFUSE_OOB_PROTECT_BYTES_LEN])) { - RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, - "efuse_addr(%#x) Out of size!!\n", efuse_addr); + rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, + "efuse_addr(%#x) Out of size!!\n", efuse_addr); } return true; @@ -1038,8 +1038,8 @@ static u8 enable_efuse_data_write(struct ieee80211_hw *hw, u8 tmpdata[8]; memset(tmpdata, 0xff, PGPKT_DATA_SIZE); - RT_TRACE(rtlpriv, COMP_EFUSE, DBG_LOUD, - "word_en = %x efuse_addr=%x\n", word_en, efuse_addr); + rtl_dbg(rtlpriv, COMP_EFUSE, DBG_LOUD, + "word_en = %x efuse_addr=%x\n", word_en, efuse_addr); if (!(word_en & BIT(0))) { tmpaddr = start_addr; @@ -1242,11 +1242,11 @@ int rtl_get_hwinfo(struct ieee80211_hw *hw, struct rtl_priv *rtlpriv, eeprom_id = *((u16 *)&hwinfo[0]); if (eeprom_id != params[0]) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "EEPROM ID(%#x) is invalid!!\n", eeprom_id); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "EEPROM ID(%#x) is invalid!!\n", eeprom_id); rtlefuse->autoload_failflag = true; } else { - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "Autoload OK\n"); rtlefuse->autoload_failflag = false; } @@ -1257,30 +1257,30 @@ int rtl_get_hwinfo(struct ieee80211_hw *hw, struct rtl_priv *rtlpriv, rtlefuse->eeprom_did = *(u16 *)&hwinfo[params[2]]; rtlefuse->eeprom_svid = *(u16 *)&hwinfo[params[3]]; rtlefuse->eeprom_smid = *(u16 *)&hwinfo[params[4]]; - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "EEPROMId = 0x%4x\n", eeprom_id); - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid); - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did); - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid); - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROMId = 0x%4x\n", eeprom_id); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROM VID = 0x%4x\n", rtlefuse->eeprom_vid); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROM DID = 0x%4x\n", rtlefuse->eeprom_did); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROM SVID = 0x%4x\n", rtlefuse->eeprom_svid); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROM SMID = 0x%4x\n", rtlefuse->eeprom_smid); for (i = 0; i < 6; i += 2) { usvalue = *(u16 *)&hwinfo[params[5] + i]; *((u16 *)(&rtlefuse->dev_addr[i])) = usvalue; } - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, "%pM\n", rtlefuse->dev_addr); rtlefuse->eeprom_channelplan = *&hwinfo[params[6]]; rtlefuse->eeprom_version = *(u16 *)&hwinfo[params[7]]; rtlefuse->txpwr_fromeprom = true; rtlefuse->eeprom_oemid = *&hwinfo[params[8]]; - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "EEPROM Customer ID: 0x%2x\n", rtlefuse->eeprom_oemid); /* set channel plan to world wide 13 */ rtlefuse->channel_plan = params[9]; diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c index 25335bd2873b..9006aa4446b3 100644 --- a/drivers/net/wireless/realtek/rtlwifi/pci.c +++ b/drivers/net/wireless/realtek/rtlwifi/pci.c @@ -204,8 +204,8 @@ static void rtl_pci_disable_aspm(struct ieee80211_hw *hw) return; if (pcibridge_vendor == PCI_BRIDGE_VENDOR_UNKNOWN) { - RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE, - "PCI(Bridge) UNKNOWN\n"); + rtl_dbg(rtlpriv, COMP_POWER, DBG_TRACE, + "PCI(Bridge) UNKNOWN\n"); return; } @@ -254,8 +254,8 @@ static void rtl_pci_enable_aspm(struct ieee80211_hw *hw) return; if (pcibridge_vendor == PCI_BRIDGE_VENDOR_UNKNOWN) { - RT_TRACE(rtlpriv, COMP_POWER, DBG_TRACE, - "PCI(Bridge) UNKNOWN\n"); + rtl_dbg(rtlpriv, COMP_POWER, DBG_TRACE, + "PCI(Bridge) UNKNOWN\n"); return; } @@ -271,10 +271,10 @@ static void rtl_pci_enable_aspm(struct ieee80211_hw *hw) pci_write_config_byte(rtlpci->pdev, (num4bytes << 2), u_pcibridge_aspmsetting); - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "PlatformEnableASPM(): Write reg[%x] = %x\n", - (pcipriv->ndis_adapter.pcibridge_pciehdr_offset + 0x10), - u_pcibridge_aspmsetting); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "PlatformEnableASPM(): Write reg[%x] = %x\n", + (pcipriv->ndis_adapter.pcibridge_pciehdr_offset + 0x10), + u_pcibridge_aspmsetting); udelay(50); @@ -331,11 +331,11 @@ static bool rtl_pci_check_buddy_priv(struct ieee80211_hw *hw, list_for_each_entry(tpriv, &rtlpriv->glb_var->glb_priv_list, list) { tpcipriv = (struct rtl_pci_priv *)tpriv->priv; - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "pcipriv->ndis_adapter.funcnumber %x\n", + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "pcipriv->ndis_adapter.funcnumber %x\n", pcipriv->ndis_adapter.funcnumber); - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "tpcipriv->ndis_adapter.funcnumber %x\n", + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "tpcipriv->ndis_adapter.funcnumber %x\n", tpcipriv->ndis_adapter.funcnumber); if (pcipriv->ndis_adapter.busnumber == @@ -350,8 +350,8 @@ static bool rtl_pci_check_buddy_priv(struct ieee80211_hw *hw, } } - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "find_buddy_priv %d\n", find_buddy_priv); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "find_buddy_priv %d\n", find_buddy_priv); if (find_buddy_priv) *buddy_priv = tpriv; @@ -388,8 +388,8 @@ static void rtl_pci_parse_configuration(struct pci_dev *pdev, pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &linkctrl_reg); pcipriv->ndis_adapter.linkctrl_reg = (u8)linkctrl_reg; - RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, "Link Control Register =%x\n", - pcipriv->ndis_adapter.linkctrl_reg); + rtl_dbg(rtlpriv, COMP_INIT, DBG_TRACE, "Link Control Register =%x\n", + pcipriv->ndis_adapter.linkctrl_reg); pci_read_config_byte(pdev, 0x98, &tmp); tmp |= BIT(4); @@ -557,11 +557,11 @@ static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio) if (rtlpriv->rtlhal.earlymode_enable) skb_pull(skb, EM_HDR_LEN); - RT_TRACE(rtlpriv, (COMP_INTR | COMP_SEND), DBG_TRACE, - "new ring->idx:%d, free: skb_queue_len:%d, free: seq:%x\n", - ring->idx, - skb_queue_len(&ring->queue), - *(u16 *)(skb->data + 22)); + rtl_dbg(rtlpriv, (COMP_INTR | COMP_SEND), DBG_TRACE, + "new ring->idx:%d, free: skb_queue_len:%d, free: seq:%x\n", + ring->idx, + skb_queue_len(&ring->queue), + *(u16 *)(skb->data + 22)); if (prio == TXCMD_QUEUE) { dev_kfree_skb(skb); @@ -608,10 +608,10 @@ static void _rtl_pci_tx_isr(struct ieee80211_hw *hw, int prio) } if ((ring->entries - skb_queue_len(&ring->queue)) <= 4) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG, - "more desc left, wake skb_queue@%d, ring->idx = %d, skb_queue_len = 0x%x\n", - prio, ring->idx, - skb_queue_len(&ring->queue)); + rtl_dbg(rtlpriv, COMP_ERR, DBG_DMESG, + "more desc left, wake skb_queue@%d, ring->idx = %d, skb_queue_len = 0x%x\n", + prio, ring->idx, + skb_queue_len(&ring->queue)); ieee80211_wake_queue(hw, skb_get_queue_mapping(skb)); } @@ -801,9 +801,9 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) skb_reserve(skb, stats.rx_drvinfo_size + stats.rx_bufshift); } else { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "skb->end - skb->tail = %d, len is %d\n", - skb->end - skb->tail, len); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "skb->end - skb->tail = %d, len is %d\n", + skb->end - skb->tail, len); dev_kfree_skb_any(skb); goto new_trx_end; } @@ -925,67 +925,67 @@ static irqreturn_t _rtl_pci_interrupt(int irq, void *dev_id) /*<1> beacon related */ if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_TBDOK]) - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "beacon ok interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "beacon ok interrupt!\n"); if (unlikely(intvec.inta & rtlpriv->cfg->maps[RTL_IMR_TBDER])) - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "beacon err interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "beacon err interrupt!\n"); if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_BDOK]) - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, "beacon interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, "beacon interrupt!\n"); if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_BCNINT]) { - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "prepare beacon for interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "prepare beacon for interrupt!\n"); tasklet_schedule(&rtlpriv->works.irq_prepare_bcn_tasklet); } /*<2> Tx related */ if (unlikely(intvec.intb & rtlpriv->cfg->maps[RTL_IMR_TXFOVW])) - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, "IMR_TXFOVW!\n"); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, "IMR_TXFOVW!\n"); if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_MGNTDOK]) { - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "Manage ok interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "Manage ok interrupt!\n"); _rtl_pci_tx_isr(hw, MGNT_QUEUE); } if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_HIGHDOK]) { - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "HIGH_QUEUE ok interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "HIGH_QUEUE ok interrupt!\n"); _rtl_pci_tx_isr(hw, HIGH_QUEUE); } if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_BKDOK]) { rtlpriv->link_info.num_tx_inperiod++; - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "BK Tx OK interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "BK Tx OK interrupt!\n"); _rtl_pci_tx_isr(hw, BK_QUEUE); } if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_BEDOK]) { rtlpriv->link_info.num_tx_inperiod++; - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "BE TX OK interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "BE TX OK interrupt!\n"); _rtl_pci_tx_isr(hw, BE_QUEUE); } if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_VIDOK]) { rtlpriv->link_info.num_tx_inperiod++; - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "VI TX OK interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "VI TX OK interrupt!\n"); _rtl_pci_tx_isr(hw, VI_QUEUE); } if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_VODOK]) { rtlpriv->link_info.num_tx_inperiod++; - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "Vo TX OK interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "Vo TX OK interrupt!\n"); _rtl_pci_tx_isr(hw, VO_QUEUE); } @@ -993,8 +993,8 @@ static irqreturn_t _rtl_pci_interrupt(int irq, void *dev_id) if (intvec.intd & rtlpriv->cfg->maps[RTL_IMR_H2CDOK]) { rtlpriv->link_info.num_tx_inperiod++; - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "H2C TX OK interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "H2C TX OK interrupt!\n"); _rtl_pci_tx_isr(hw, H2C_QUEUE); } } @@ -1003,34 +1003,34 @@ static irqreturn_t _rtl_pci_interrupt(int irq, void *dev_id) if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_COMDOK]) { rtlpriv->link_info.num_tx_inperiod++; - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "CMD TX OK interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "CMD TX OK interrupt!\n"); _rtl_pci_tx_isr(hw, TXCMD_QUEUE); } } /*<3> Rx related */ if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_ROK]) { - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, "Rx ok interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, "Rx ok interrupt!\n"); _rtl_pci_rx_interrupt(hw); } if (unlikely(intvec.inta & rtlpriv->cfg->maps[RTL_IMR_RDU])) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "rx descriptor unavailable!\n"); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "rx descriptor unavailable!\n"); _rtl_pci_rx_interrupt(hw); } if (unlikely(intvec.intb & rtlpriv->cfg->maps[RTL_IMR_RXFOVW])) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, "rx overflow !\n"); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, "rx overflow !\n"); _rtl_pci_rx_interrupt(hw); } /*<4> fw related*/ if (rtlhal->hw_type == HARDWARE_TYPE_RTL8723AE) { if (intvec.inta & rtlpriv->cfg->maps[RTL_IMR_C2HCMD]) { - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "firmware interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "firmware interrupt!\n"); queue_delayed_work(rtlpriv->works.rtl_wq, &rtlpriv->works.fwevt_wq, 0); } @@ -1046,8 +1046,8 @@ static irqreturn_t _rtl_pci_interrupt(int irq, void *dev_id) rtlhal->hw_type == HARDWARE_TYPE_RTL8723BE) { if (unlikely(intvec.inta & rtlpriv->cfg->maps[RTL_IMR_HSISR_IND])) { - RT_TRACE(rtlpriv, COMP_INTR, DBG_TRACE, - "hsisr interrupt!\n"); + rtl_dbg(rtlpriv, COMP_INTR, DBG_TRACE, + "hsisr interrupt!\n"); _rtl_pci_hs_interrupt(hw); } } @@ -1251,8 +1251,8 @@ static int _rtl_pci_init_tx_ring(struct ieee80211_hw *hw, rtlpci->tx_ring[prio].entries = entries; skb_queue_head_init(&rtlpci->tx_ring[prio].queue); - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "queue:%d, ring_addr:%p\n", - prio, desc); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "queue:%d, ring_addr:%p\n", + prio, desc); /* init every desc in this ring */ if (!rtlpriv->use_new_trx_flow) { @@ -1649,10 +1649,10 @@ static int rtl_pci_tx(struct ieee80211_hw *hw, true, HW_DESC_OWN); if (own == 1 && hw_queue != BEACON_QUEUE) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "No more TX desc@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%x\n", - hw_queue, ring->idx, idx, - skb_queue_len(&ring->queue)); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "No more TX desc@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%x\n", + hw_queue, ring->idx, idx, + skb_queue_len(&ring->queue)); spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags); @@ -1662,8 +1662,8 @@ static int rtl_pci_tx(struct ieee80211_hw *hw, if (rtlpriv->cfg->ops->get_available_desc && rtlpriv->cfg->ops->get_available_desc(hw, hw_queue) == 0) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "get_available_desc fail\n"); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "get_available_desc fail\n"); spin_unlock_irqrestore(&rtlpriv->locks.irq_th_lock, flags); return skb->len; } @@ -1686,8 +1686,8 @@ static int rtl_pci_tx(struct ieee80211_hw *hw, if ((ring->entries - skb_queue_len(&ring->queue)) < 2 && hw_queue != BEACON_QUEUE) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD, - "less desc left, stop skb_queue@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%x\n", + rtl_dbg(rtlpriv, COMP_ERR, DBG_LOUD, + "less desc left, stop skb_queue@%d, ring->idx = %d, idx = %d, skb_queue_len = 0x%x\n", hw_queue, ring->idx, idx, skb_queue_len(&ring->queue)); @@ -1794,8 +1794,8 @@ static int rtl_pci_start(struct ieee80211_hw *hw) err = rtlpriv->cfg->ops->hw_init(hw); if (err) { - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "Failed to config hardware!\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "Failed to config hardware!\n"); kfree(rtlpriv->btcoexist.btc_context); kfree(rtlpriv->btcoexist.wifi_only_context); return err; @@ -1804,7 +1804,7 @@ static int rtl_pci_start(struct ieee80211_hw *hw) &rtlmac->retry_long); rtlpriv->cfg->ops->enable_interrupt(hw); - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, "enable_interrupt OK\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, "enable_interrupt OK\n"); rtl_init_rx_config(hw); @@ -1815,7 +1815,7 @@ static int rtl_pci_start(struct ieee80211_hw *hw) rtlpci->up_first_time = false; - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "%s OK\n", __func__); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, "%s OK\n", __func__); return 0; } @@ -1909,71 +1909,71 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev, deviceid == RTL_PCI_8171_DID) { switch (revisionid) { case RTL_PCI_REVISION_ID_8192PCIE: - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "8192 PCI-E is found - vid/did=%x/%x\n", - venderid, deviceid); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "8192 PCI-E is found - vid/did=%x/%x\n", + venderid, deviceid); rtlhal->hw_type = HARDWARE_TYPE_RTL8192E; return false; case RTL_PCI_REVISION_ID_8192SE: - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "8192SE is found - vid/did=%x/%x\n", - venderid, deviceid); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "8192SE is found - vid/did=%x/%x\n", + venderid, deviceid); rtlhal->hw_type = HARDWARE_TYPE_RTL8192SE; break; default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "Err: Unknown device - vid/did=%x/%x\n", - venderid, deviceid); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "Err: Unknown device - vid/did=%x/%x\n", + venderid, deviceid); rtlhal->hw_type = HARDWARE_TYPE_RTL8192SE; break; } } else if (deviceid == RTL_PCI_8723AE_DID) { rtlhal->hw_type = HARDWARE_TYPE_RTL8723AE; - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "8723AE PCI-E is found - vid/did=%x/%x\n", - venderid, deviceid); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "8723AE PCI-E is found - vid/did=%x/%x\n", + venderid, deviceid); } else if (deviceid == RTL_PCI_8192CET_DID || deviceid == RTL_PCI_8192CE_DID || deviceid == RTL_PCI_8191CE_DID || deviceid == RTL_PCI_8188CE_DID) { rtlhal->hw_type = HARDWARE_TYPE_RTL8192CE; - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "8192C PCI-E is found - vid/did=%x/%x\n", - venderid, deviceid); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "8192C PCI-E is found - vid/did=%x/%x\n", + venderid, deviceid); } else if (deviceid == RTL_PCI_8192DE_DID || deviceid == RTL_PCI_8192DE_DID2) { rtlhal->hw_type = HARDWARE_TYPE_RTL8192DE; - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "8192D PCI-E is found - vid/did=%x/%x\n", - venderid, deviceid); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "8192D PCI-E is found - vid/did=%x/%x\n", + venderid, deviceid); } else if (deviceid == RTL_PCI_8188EE_DID) { rtlhal->hw_type = HARDWARE_TYPE_RTL8188EE; - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "Find adapter, Hardware type is 8188EE\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "Find adapter, Hardware type is 8188EE\n"); } else if (deviceid == RTL_PCI_8723BE_DID) { rtlhal->hw_type = HARDWARE_TYPE_RTL8723BE; - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "Find adapter, Hardware type is 8723BE\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "Find adapter, Hardware type is 8723BE\n"); } else if (deviceid == RTL_PCI_8192EE_DID) { rtlhal->hw_type = HARDWARE_TYPE_RTL8192EE; - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "Find adapter, Hardware type is 8192EE\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "Find adapter, Hardware type is 8192EE\n"); } else if (deviceid == RTL_PCI_8821AE_DID) { rtlhal->hw_type = HARDWARE_TYPE_RTL8821AE; - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "Find adapter, Hardware type is 8821AE\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "Find adapter, Hardware type is 8821AE\n"); } else if (deviceid == RTL_PCI_8812AE_DID) { rtlhal->hw_type = HARDWARE_TYPE_RTL8812AE; - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "Find adapter, Hardware type is 8812AE\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "Find adapter, Hardware type is 8812AE\n"); } else if (deviceid == RTL_PCI_8822BE_DID) { rtlhal->hw_type = HARDWARE_TYPE_RTL8822BE; rtlhal->bandset = BAND_ON_BOTH; - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "Find adapter, Hardware type is 8822BE\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "Find adapter, Hardware type is 8822BE\n"); } else { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "Err: Unknown device - vid/did=%x/%x\n", + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "Err: Unknown device - vid/did=%x/%x\n", venderid, deviceid); rtlhal->hw_type = RTL_DEFAULT_HARDWARE_TYPE; @@ -1982,17 +1982,17 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev, if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192DE) { if (revisionid == 0 || revisionid == 1) { if (revisionid == 0) { - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "Find 92DE MAC0\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "Find 92DE MAC0\n"); rtlhal->interfaceindex = 0; } else if (revisionid == 1) { - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "Find 92DE MAC1\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "Find 92DE MAC1\n"); rtlhal->interfaceindex = 1; } } else { - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "Unknown device - VendorID/DeviceID=%x/%x, Revision=%x\n", + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "Unknown device - VendorID/DeviceID=%x/%x, Revision=%x\n", venderid, deviceid, revisionid); rtlhal->interfaceindex = 0; } @@ -2026,9 +2026,9 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev, for (tmp = 0; tmp < PCI_BRIDGE_VENDOR_MAX; tmp++) { if (bridge_pdev->vendor == pcibridge_vendors[tmp]) { pcipriv->ndis_adapter.pcibridge_vendor = tmp; - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "Pci Bridge Vendor is found index: %d\n", - tmp); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "Pci Bridge Vendor is found index: %d\n", + tmp); break; } } @@ -2056,22 +2056,22 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev, } } - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "pcidev busnumber:devnumber:funcnumber:vendor:link_ctl %d:%d:%d:%x:%x\n", - pcipriv->ndis_adapter.busnumber, - pcipriv->ndis_adapter.devnumber, - pcipriv->ndis_adapter.funcnumber, - pdev->vendor, pcipriv->ndis_adapter.linkctrl_reg); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "pcidev busnumber:devnumber:funcnumber:vendor:link_ctl %d:%d:%d:%x:%x\n", + pcipriv->ndis_adapter.busnumber, + pcipriv->ndis_adapter.devnumber, + pcipriv->ndis_adapter.funcnumber, + pdev->vendor, pcipriv->ndis_adapter.linkctrl_reg); - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "pci_bridge busnumber:devnumber:funcnumber:vendor:pcie_cap:link_ctl_reg:amd %d:%d:%d:%x:%x:%x:%x\n", - pcipriv->ndis_adapter.pcibridge_busnum, - pcipriv->ndis_adapter.pcibridge_devnum, - pcipriv->ndis_adapter.pcibridge_funcnum, - pcibridge_vendors[pcipriv->ndis_adapter.pcibridge_vendor], - pcipriv->ndis_adapter.pcibridge_pciehdr_offset, - pcipriv->ndis_adapter.pcibridge_linkctrlreg, - pcipriv->ndis_adapter.amd_l1_patch); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "pci_bridge busnumber:devnumber:funcnumber:vendor:pcie_cap:link_ctl_reg:amd %d:%d:%d:%x:%x:%x:%x\n", + pcipriv->ndis_adapter.pcibridge_busnum, + pcipriv->ndis_adapter.pcibridge_devnum, + pcipriv->ndis_adapter.pcibridge_funcnum, + pcibridge_vendors[pcipriv->ndis_adapter.pcibridge_vendor], + pcipriv->ndis_adapter.pcibridge_pciehdr_offset, + pcipriv->ndis_adapter.pcibridge_linkctrlreg, + pcipriv->ndis_adapter.amd_l1_patch); rtl_pci_parse_configuration(pdev, hw); list_add_tail(&rtlpriv->list, &rtlpriv->glb_var->glb_priv_list); @@ -2099,8 +2099,8 @@ static int rtl_pci_intr_mode_msi(struct ieee80211_hw *hw) rtlpci->using_msi = true; - RT_TRACE(rtlpriv, COMP_INIT | COMP_INTR, DBG_DMESG, - "MSI Interrupt Mode!\n"); + rtl_dbg(rtlpriv, COMP_INIT | COMP_INTR, DBG_DMESG, + "MSI Interrupt Mode!\n"); return 0; } @@ -2117,8 +2117,8 @@ static int rtl_pci_intr_mode_legacy(struct ieee80211_hw *hw) return ret; rtlpci->using_msi = false; - RT_TRACE(rtlpriv, COMP_INIT | COMP_INTR, DBG_DMESG, - "Pin-based Interrupt Mode!\n"); + rtl_dbg(rtlpriv, COMP_INIT | COMP_INTR, DBG_DMESG, + "Pin-based Interrupt Mode!\n"); return 0; } @@ -2245,10 +2245,10 @@ int rtl_pci_probe(struct pci_dev *pdev, goto fail2; } - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "mem mapped space: start: 0x%08lx len:%08lx flags:%08lx, after map:0x%08lx\n", - pmem_start, pmem_len, pmem_flags, - rtlpriv->io.pci_mem_start); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "mem mapped space: start: 0x%08lx len:%08lx flags:%08lx, after map:0x%08lx\n", + pmem_start, pmem_len, pmem_flags, + rtlpriv->io.pci_mem_start); /* Disable Clk Request */ pci_write_config_byte(pdev, 0x81, 0); @@ -2310,9 +2310,9 @@ int rtl_pci_probe(struct pci_dev *pdev, rtlpci = rtl_pcidev(pcipriv); err = rtl_pci_intr_mode_decide(hw); if (err) { - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "%s: failed to register IRQ handler\n", - wiphy_name(hw->wiphy)); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "%s: failed to register IRQ handler\n", + wiphy_name(hw->wiphy)); goto fail3; } rtlpci->irq_alloc = 1; diff --git a/drivers/net/wireless/realtek/rtlwifi/ps.c b/drivers/net/wireless/realtek/rtlwifi/ps.c index fff8dda14023..9a4601a71eae 100644 --- a/drivers/net/wireless/realtek/rtlwifi/ps.c +++ b/drivers/net/wireless/realtek/rtlwifi/ps.c @@ -19,8 +19,8 @@ bool rtl_ps_enable_nic(struct ieee80211_hw *hw) rtlpriv->intf_ops->reset_trx_ring(hw); if (is_hal_stop(rtlhal)) - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "Driver is already down!\n"); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "Driver is already down!\n"); /*<2> Enable Adapter */ if (rtlpriv->cfg->ops->hw_init(hw)) @@ -81,9 +81,9 @@ static bool rtl_ps_set_rf_state(struct ieee80211_hw *hw, if (ppsc->rfchange_inprogress) { spin_unlock(&rtlpriv->locks.rf_ps_lock); - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "RF Change in progress! Wait to set..state_toset(%d).\n", - state_toset); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "RF Change in progress! Wait to set..state_toset(%d).\n", + state_toset); /* Set RF after the previous action is done. */ while (ppsc->rfchange_inprogress) { @@ -195,8 +195,8 @@ void rtl_ips_nic_off_wq_callback(void *data) enum rf_pwrstate rtstate; if (mac->opmode != NL80211_IFTYPE_STATION) { - RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING, - "not station return\n"); + rtl_dbg(rtlpriv, COMP_ERR, DBG_WARNING, + "not station return\n"); return; } @@ -232,8 +232,8 @@ void rtl_ips_nic_off_wq_callback(void *data) !ppsc->swrf_processing && (mac->link_state == MAC80211_NOLINK) && !mac->act_scanning) { - RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE, - "IPSEnter(): Turn off RF\n"); + rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, + "IPSEnter(): Turn off RF\n"); ppsc->inactive_pwrstate = ERFOFF; ppsc->in_powersavemode = true; @@ -311,8 +311,8 @@ static bool rtl_get_fwlps_doze(struct ieee80211_hw *hw) ppsc->last_delaylps_stamp_jiffies); if (ps_timediff < 2000) { - RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, - "Delay enter Fw LPS for DHCP, ARP, or EAPOL exchanging state\n"); + rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD, + "Delay enter Fw LPS for DHCP, ARP, or EAPOL exchanging state\n"); return false; } @@ -357,9 +357,9 @@ void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode) if ((ppsc->fwctrl_lps) && ppsc->report_linked) { if (ppsc->dot11_psmode == EACTIVE) { - RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, - "FW LPS leave ps_mode:%x\n", - FW_PS_ACTIVE_MODE); + rtl_dbg(rtlpriv, COMP_RF, DBG_DMESG, + "FW LPS leave ps_mode:%x\n", + FW_PS_ACTIVE_MODE); enter_fwlps = false; ppsc->pwr_mode = FW_PS_ACTIVE_MODE; ppsc->smart_ps = 0; @@ -372,9 +372,9 @@ void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode) rtlpriv->btcoexist.btc_ops->btc_lps_notify(rtlpriv, rt_psmode); } else { if (rtl_get_fwlps_doze(hw)) { - RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG, - "FW LPS enter ps_mode:%x\n", - ppsc->fwctrl_psmode); + rtl_dbg(rtlpriv, COMP_RF, DBG_DMESG, + "FW LPS enter ps_mode:%x\n", + ppsc->fwctrl_psmode); if (rtlpriv->cfg->ops->get_btc_status()) rtlpriv->btcoexist.btc_ops->btc_lps_notify(rtlpriv, rt_psmode); enter_fwlps = true; @@ -424,8 +424,8 @@ static void rtl_lps_enter_core(struct ieee80211_hw *hw) * bt_ccoexist may ask to enter lps. * In normal case, this constraint move to rtl_lps_set_psmode(). */ - RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, - "Enter 802.11 power save mode...\n"); + rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD, + "Enter 802.11 power save mode...\n"); rtl_lps_set_psmode(hw, EAUTOPS); mutex_unlock(&rtlpriv->locks.lps_mutex); @@ -453,8 +453,8 @@ static void rtl_lps_leave_core(struct ieee80211_hw *hw) RT_CLEAR_PS_LEVEL(ppsc, RT_PS_LEVEL_ASPM); } - RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD, - "Busy Traffic,Leave 802.11 power save..\n"); + rtl_dbg(rtlpriv, COMP_POWER, DBG_LOUD, + "Busy Traffic,Leave 802.11 power save..\n"); rtl_lps_set_psmode(hw, EACTIVE); } @@ -538,8 +538,8 @@ void rtl_swlps_beacon(struct ieee80211_hw *hw, void *data, unsigned int len) queue_delayed_work(rtlpriv->works.rtl_wq, &rtlpriv->works.ps_work, MSECS(5)); } else { - RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, - "u_bufferd: %x, m_buffered: %x\n", u_buffed, m_buffed); + rtl_dbg(rtlpriv, COMP_POWER, DBG_DMESG, + "u_bufferd: %x, m_buffered: %x\n", u_buffed, m_buffed); } } EXPORT_SYMBOL_GPL(rtl_swlps_beacon); @@ -634,9 +634,9 @@ void rtl_swlps_rf_sleep(struct ieee80211_hw *hw) /* this print should always be dtim_conter = 0 & * sleep = dtim_period, that meaons, we should * awake before every dtim */ - RT_TRACE(rtlpriv, COMP_POWER, DBG_DMESG, - "dtim_counter:%x will sleep :%d beacon_intv\n", - rtlpriv->psc.dtim_counter, sleep_intv); + rtl_dbg(rtlpriv, COMP_POWER, DBG_DMESG, + "dtim_counter:%x will sleep :%d beacon_intv\n", + rtlpriv->psc.dtim_counter, sleep_intv); /* we tested that 40ms is enough for sw & hw sw delay */ queue_delayed_work(rtlpriv->works.rtl_wq, &rtlpriv->works.ps_rfon_wq, @@ -748,9 +748,9 @@ static void rtl_p2p_noa_ie(struct ieee80211_hw *hw, void *data, if (ie[0] == 12) { find_p2p_ps_ie = true; if ((noa_len - 2) % 13 != 0) { - RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD, - "P2P notice of absence: invalid length.%d\n", - noa_len); + rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, + "P2P notice of absence: invalid length.%d\n", + noa_len); return; } else { noa_num = (noa_len - 2) / 13; @@ -761,8 +761,8 @@ static void rtl_p2p_noa_ie(struct ieee80211_hw *hw, void *data, noa_index = ie[3]; if (rtlpriv->psc.p2p_ps_info.p2p_ps_mode == P2P_PS_NONE || noa_index != p2pinfo->noa_index) { - RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, - "update NOA ie.\n"); + rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, + "update NOA ie.\n"); p2pinfo->noa_index = noa_index; p2pinfo->opp_ps = (ie[4] >> 7); p2pinfo->ctwindow = ie[4] & 0x7F; @@ -833,7 +833,7 @@ static void rtl_p2p_action_ie(struct ieee80211_hw *hw, void *data, if (ie == NULL) return; - RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "action frame find P2P IE.\n"); + rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, "action frame find P2P IE.\n"); /*to find noa ie*/ while (ie + 1 < end) { noa_len = READEF2BYTE((__le16 *)&ie[1]); @@ -841,13 +841,13 @@ static void rtl_p2p_action_ie(struct ieee80211_hw *hw, void *data, return; if (ie[0] == 12) { - RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "find NOA IE.\n"); + rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, "find NOA IE.\n"); RT_PRINT_DATA(rtlpriv, COMP_FW, DBG_LOUD, "noa ie ", ie, noa_len); if ((noa_len - 2) % 13 != 0) { - RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, - "P2P notice of absence: invalid length.%d\n", - noa_len); + rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, + "P2P notice of absence: invalid length.%d\n", + noa_len); return; } else { noa_num = (noa_len - 2) / 13; @@ -905,7 +905,7 @@ void rtl_p2p_ps_cmd(struct ieee80211_hw *hw , u8 p2p_ps_state) struct rtl_ps_ctl *rtlps = rtl_psc(rtl_priv(hw)); struct rtl_p2p_ps_info *p2pinfo = &(rtlpriv->psc.p2p_ps_info); - RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, " p2p state %x\n" , p2p_ps_state); + rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, " p2p state %x\n", p2p_ps_state); switch (p2p_ps_state) { case P2P_PS_DISABLE: p2pinfo->p2p_ps_state = p2p_ps_state; @@ -957,18 +957,18 @@ void rtl_p2p_ps_cmd(struct ieee80211_hw *hw , u8 p2p_ps_state) default: break; } - RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, - "ctwindow %x oppps %x\n", - p2pinfo->ctwindow , p2pinfo->opp_ps); - RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, - "count %x duration %x index %x interval %x start time %x noa num %x\n", - p2pinfo->noa_count_type[0], - p2pinfo->noa_duration[0], - p2pinfo->noa_index, - p2pinfo->noa_interval[0], - p2pinfo->noa_start_time[0], - p2pinfo->noa_num); - RT_TRACE(rtlpriv, COMP_FW, DBG_LOUD, "end\n"); + rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, + "ctwindow %x oppps %x\n", + p2pinfo->ctwindow, p2pinfo->opp_ps); + rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, + "count %x duration %x index %x interval %x start time %x noa num %x\n", + p2pinfo->noa_count_type[0], + p2pinfo->noa_duration[0], + p2pinfo->noa_index, + p2pinfo->noa_interval[0], + p2pinfo->noa_start_time[0], + p2pinfo->noa_num); + rtl_dbg(rtlpriv, COMP_FW, DBG_LOUD, "end\n"); } void rtl_p2p_info(struct ieee80211_hw *hw, void *data, unsigned int len) diff --git a/drivers/net/wireless/realtek/rtlwifi/regd.c b/drivers/net/wireless/realtek/rtlwifi/regd.c index 8be31e0ad878..4cf8face0bbd 100644 --- a/drivers/net/wireless/realtek/rtlwifi/regd.c +++ b/drivers/net/wireless/realtek/rtlwifi/regd.c @@ -393,13 +393,13 @@ int rtl_regd_init(struct ieee80211_hw *hw, rtlpriv->regd.country_code = channel_plan_to_country_code(rtlpriv->efuse.channel_plan); - RT_TRACE(rtlpriv, COMP_REGD, DBG_DMESG, - "rtl: EEPROM regdomain: 0x%0x country code: %d\n", - rtlpriv->efuse.channel_plan, rtlpriv->regd.country_code); + rtl_dbg(rtlpriv, COMP_REGD, DBG_DMESG, + "rtl: EEPROM regdomain: 0x%0x country code: %d\n", + rtlpriv->efuse.channel_plan, rtlpriv->regd.country_code); if (rtlpriv->regd.country_code >= COUNTRY_CODE_MAX) { - RT_TRACE(rtlpriv, COMP_REGD, DBG_DMESG, - "rtl: EEPROM indicates invalid country code, world wide 13 should be used\n"); + rtl_dbg(rtlpriv, COMP_REGD, DBG_DMESG, + "rtl: EEPROM indicates invalid country code, world wide 13 should be used\n"); rtlpriv->regd.country_code = COUNTRY_CODE_WORLD_WIDE_13; } @@ -414,9 +414,9 @@ int rtl_regd_init(struct ieee80211_hw *hw, rtlpriv->regd.alpha2[1] = '0'; } - RT_TRACE(rtlpriv, COMP_REGD, DBG_TRACE, - "rtl: Country alpha2 being used: %c%c\n", - rtlpriv->regd.alpha2[0], rtlpriv->regd.alpha2[1]); + rtl_dbg(rtlpriv, COMP_REGD, DBG_TRACE, + "rtl: Country alpha2 being used: %c%c\n", + rtlpriv->regd.alpha2[0], rtlpriv->regd.alpha2[1]); _rtl_regd_init_wiphy(&rtlpriv->regd, wiphy, reg_notifier); @@ -428,7 +428,7 @@ void rtl_reg_notifier(struct wiphy *wiphy, struct regulatory_request *request) struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy); struct rtl_priv *rtlpriv = rtl_priv(hw); - RT_TRACE(rtlpriv, COMP_REGD, DBG_LOUD, "\n"); + rtl_dbg(rtlpriv, COMP_REGD, DBG_LOUD, "\n"); _rtl_reg_notifier_apply(wiphy, request, &rtlpriv->regd); } diff --git a/drivers/net/wireless/realtek/rtlwifi/usb.c b/drivers/net/wireless/realtek/rtlwifi/usb.c index 9bcb187d37dc..fc1548ad434f 100644 --- a/drivers/net/wireless/realtek/rtlwifi/usb.c +++ b/drivers/net/wireless/realtek/rtlwifi/usb.c @@ -259,15 +259,15 @@ static int _rtl_usb_init_tx(struct ieee80211_hw *hw) ? USB_HIGH_SPEED_BULK_SIZE : USB_FULL_SPEED_BULK_SIZE; - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "USB Max Bulk-out Size=%d\n", - rtlusb->max_bulk_out_size); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, "USB Max Bulk-out Size=%d\n", + rtlusb->max_bulk_out_size); for (i = 0; i < __RTL_TXQ_NUM; i++) { u32 ep_num = rtlusb->ep_map.ep_mapping[i]; if (!ep_num) { - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "Invalid endpoint map setting!\n"); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "Invalid endpoint map setting!\n"); return -EINVAL; } } @@ -337,10 +337,10 @@ static int _rtl_usb_init(struct ieee80211_hw *hw) else if (usb_endpoint_dir_out(pep_desc)) rtlusb->out_ep_nums++; - RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, - "USB EP(0x%02x), MaxPacketSize=%d, Interval=%d\n", - pep_desc->bEndpointAddress, pep_desc->wMaxPacketSize, - pep_desc->bInterval); + rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, + "USB EP(0x%02x), MaxPacketSize=%d, Interval=%d\n", + pep_desc->bEndpointAddress, pep_desc->wMaxPacketSize, + pep_desc->bInterval); } if (rtlusb->in_ep_nums < rtlpriv->cfg->usb_interface_cfg->in_ep_num) { pr_err("Too few input end points found\n"); @@ -931,7 +931,7 @@ static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw, memset(&tcb_desc, 0, sizeof(struct rtl_tcb_desc)); if (ieee80211_is_auth(fc)) { - RT_TRACE(rtlpriv, COMP_SEND, DBG_DMESG, "MAC80211_LINKING\n"); + rtl_dbg(rtlpriv, COMP_SEND, DBG_DMESG, "MAC80211_LINKING\n"); } if (rtlpriv->psc.sw_ps_enabled) { From 03109f1870e2a4677551418466aa7cf895637d2b Mon Sep 17 00:00:00 2001 From: Wei Chen Date: Sun, 26 Mar 2023 05:31:38 +0000 Subject: [PATCH 090/755] wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_rfreg() [ Upstream commit 905a9241e4e8c15d2c084fee916280514848fe35 ] If there is a failure during copy_from_user or user-provided data buffer is invalid, rtl_debugfs_set_write_rfreg should return negative error code instead of a positive value count. Fix this bug by returning correct error code. Moreover, the check of buffer against null is removed since it will be handled by copy_from_user. Fixes: 610247f46feb ("rtlwifi: Improve debugging by using debugfs") Signed-off-by: Wei Chen Reviewed-by: Simon Horman Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230326053138.91338-1-harperchen1110@gmail.com Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtlwifi/debug.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/debug.c b/drivers/net/wireless/realtek/rtlwifi/debug.c index a7a5d8fa3cc0..c8db166a7dc8 100644 --- a/drivers/net/wireless/realtek/rtlwifi/debug.c +++ b/drivers/net/wireless/realtek/rtlwifi/debug.c @@ -395,8 +395,8 @@ static ssize_t rtl_debugfs_set_write_rfreg(struct file *filp, tmp_len = (count > sizeof(tmp) - 1 ? sizeof(tmp) - 1 : count); - if (!buffer || copy_from_user(tmp, buffer, tmp_len)) - return count; + if (copy_from_user(tmp, buffer, tmp_len)) + return -EFAULT; tmp[tmp_len] = '\0'; @@ -406,7 +406,7 @@ static ssize_t rtl_debugfs_set_write_rfreg(struct file *filp, if (num != 4) { rtl_dbg(rtlpriv, COMP_ERR, DBG_DMESG, "Format is \n"); - return count; + return -EINVAL; } rtl_set_rfreg(hw, path, addr, bitmask, data); From 3e3533c56cf8f4b30613db3901e63d193d6649f5 Mon Sep 17 00:00:00 2001 From: Wei Chen Date: Sun, 26 Mar 2023 05:42:17 +0000 Subject: [PATCH 091/755] wifi: rtlwifi: fix incorrect error codes in rtl_debugfs_set_write_reg() [ Upstream commit 5dbe1f8eb8c5ac69394400a5b86fd81775e96c43 ] If there is a failure during copy_from_user or user-provided data buffer is invalid, rtl_debugfs_set_write_reg should return negative error code instead of a positive value count. Fix this bug by returning correct error code. Moreover, the check of buffer against null is removed since it will be handled by copy_from_user. Fixes: 610247f46feb ("rtlwifi: Improve debugging by using debugfs") Signed-off-by: Wei Chen Reviewed-by: Simon Horman Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230326054217.93492-1-harperchen1110@gmail.com Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtlwifi/debug.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/debug.c b/drivers/net/wireless/realtek/rtlwifi/debug.c index c8db166a7dc8..3866ea300a70 100644 --- a/drivers/net/wireless/realtek/rtlwifi/debug.c +++ b/drivers/net/wireless/realtek/rtlwifi/debug.c @@ -298,8 +298,8 @@ static ssize_t rtl_debugfs_set_write_reg(struct file *filp, tmp_len = (count > sizeof(tmp) - 1 ? sizeof(tmp) - 1 : count); - if (!buffer || copy_from_user(tmp, buffer, tmp_len)) - return count; + if (copy_from_user(tmp, buffer, tmp_len)) + return -EFAULT; tmp[tmp_len] = '\0'; @@ -307,7 +307,7 @@ static ssize_t rtl_debugfs_set_write_reg(struct file *filp, num = sscanf(tmp, "%x %x %x", &addr, &val, &len); if (num != 3) - return count; + return -EINVAL; switch (len) { case 1: From 14efbe2499c12d2866fe100dd013f3f0bb11f64b Mon Sep 17 00:00:00 2001 From: Quentin Monnet Date: Wed, 5 Apr 2023 14:21:15 +0100 Subject: [PATCH 092/755] bpftool: Fix bug for long instructions in program CFG dumps [ Upstream commit 67cf52cdb6c8fa6365d29106555dacf95c9fd374 ] When dumping the control flow graphs for programs using the 16-byte long load instruction, we need to skip the second part of this instruction when looking for the next instruction to process. Otherwise, we end up printing "BUG_ld_00" from the kernel disassembler in the CFG. Fixes: efcef17a6d65 ("tools: bpftool: generate .dot graph from CFG information") Signed-off-by: Quentin Monnet Link: https://lore.kernel.org/r/20230405132120.59886-3-quentin@isovalent.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin --- tools/bpf/bpftool/xlated_dumper.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/tools/bpf/bpftool/xlated_dumper.c b/tools/bpf/bpftool/xlated_dumper.c index 5b91ee65a080..762ca450d198 100644 --- a/tools/bpf/bpftool/xlated_dumper.c +++ b/tools/bpf/bpftool/xlated_dumper.c @@ -363,8 +363,15 @@ void dump_xlated_for_graph(struct dump_data *dd, void *buf_start, void *buf_end, struct bpf_insn *insn_start = buf_start; struct bpf_insn *insn_end = buf_end; struct bpf_insn *cur = insn_start; + bool double_insn = false; for (; cur <= insn_end; cur++) { + if (double_insn) { + double_insn = false; + continue; + } + double_insn = cur->code == (BPF_LD | BPF_IMM | BPF_DW); + printf("% 4d: ", (int)(cur - insn_start + start_idx)); print_bpf_insn(&cbs, cur, true); if (cur != insn_end) From b21c7e28e80128d1f66ff080fdb089235704d153 Mon Sep 17 00:00:00 2001 From: Nicolai Stange Date: Mon, 15 Nov 2021 15:18:08 +0100 Subject: [PATCH 093/755] crypto: drbg - make drbg_prepare_hrng() handle jent instantiation errors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 559edd47cce4cc407d606b4d7f376822816fd4b8 ] Now that drbg_prepare_hrng() doesn't do anything but to instantiate a jitterentropy crypto_rng instance, it looks a little odd to have the related error handling at its only caller, drbg_instantiate(). Move the handling of jitterentropy allocation failures from drbg_instantiate() close to the allocation itself in drbg_prepare_hrng(). There is no change in behaviour. Signed-off-by: Nicolai Stange Reviewed-by: Stephan Müller Signed-off-by: Herbert Xu Stable-dep-of: 686cd976b6dd ("crypto: drbg - Only fail when jent is unavailable in FIPS mode") Signed-off-by: Sasha Levin --- crypto/drbg.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/crypto/drbg.c b/crypto/drbg.c index 9329d9dcc210..732b72e4ee4d 100644 --- a/crypto/drbg.c +++ b/crypto/drbg.c @@ -1515,6 +1515,14 @@ static int drbg_prepare_hrng(struct drbg_state *drbg) return 0; drbg->jent = crypto_alloc_rng("jitterentropy_rng", 0, 0); + if (IS_ERR(drbg->jent)) { + const int err = PTR_ERR(drbg->jent); + + drbg->jent = NULL; + if (fips_enabled || err != -ENOENT) + return err; + pr_info("DRBG: Continuing without Jitter RNG\n"); + } return 0; } @@ -1570,14 +1578,6 @@ static int drbg_instantiate(struct drbg_state *drbg, struct drbg_string *pers, if (ret) goto free_everything; - if (IS_ERR(drbg->jent)) { - ret = PTR_ERR(drbg->jent); - drbg->jent = NULL; - if (fips_enabled || ret != -ENOENT) - goto free_everything; - pr_info("DRBG: Continuing without Jitter RNG\n"); - } - reseed = false; } From 01993768b3e771c93a4e151628211ab4c7fd4cff Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 28 Mar 2023 11:35:23 +0800 Subject: [PATCH 094/755] crypto: drbg - Only fail when jent is unavailable in FIPS mode [ Upstream commit 686cd976b6ddedeeb1a1fb09ba53a891d3cc9a03 ] When jent initialisation fails for any reason other than ENOENT, the entire drbg fails to initialise, even when we're not in FIPS mode. This is wrong because we can still use the kernel RNG when we're not in FIPS mode. Change it so that it only fails when we are in FIPS mode. Fixes: 57225e679788 ("crypto: drbg - Use callback API for random readiness") Signed-off-by: Herbert Xu Reviewed-by: Stephan Mueller Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- crypto/drbg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/crypto/drbg.c b/crypto/drbg.c index 732b72e4ee4d..df80752fb649 100644 --- a/crypto/drbg.c +++ b/crypto/drbg.c @@ -1519,7 +1519,7 @@ static int drbg_prepare_hrng(struct drbg_state *drbg) const int err = PTR_ERR(drbg->jent); drbg->jent = NULL; - if (fips_enabled || err != -ENOENT) + if (fips_enabled) return err; pr_info("DRBG: Continuing without Jitter RNG\n"); } From 74d90f92eafe8ccd12827228236a28a94eda6bcc Mon Sep 17 00:00:00 2001 From: Shuchang Li Date: Tue, 4 Apr 2023 15:21:32 +0800 Subject: [PATCH 095/755] scsi: lpfc: Fix ioremap issues in lpfc_sli4_pci_mem_setup() [ Upstream commit 91a0c0c1413239d0548b5aac4c82f38f6d53a91e ] When if_type equals zero and pci_resource_start(pdev, PCI_64BIT_BAR4) returns false, drbl_regs_memmap_p is not remapped. This passes a NULL pointer to iounmap(), which can trigger a WARN() on certain arches. When if_type equals six and pci_resource_start(pdev, PCI_64BIT_BAR4) returns true, drbl_regs_memmap_p may has been remapped and ctrl_regs_memmap_p is not remapped. This is a resource leak and passes a NULL pointer to iounmap(). To fix these issues, we need to add null checks before iounmap(), and change some goto labels. Fixes: 1351e69fc6db ("scsi: lpfc: Add push-to-adapter support to sli4") Signed-off-by: Shuchang Li Link: https://lore.kernel.org/r/20230404072133.1022-1-lishuchang@hust.edu.cn Reviewed-by: Justin Tee Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/lpfc/lpfc_init.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 8930696021fb..af5238ab6309 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -10226,7 +10226,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba) goto out_iounmap_all; } else { error = -ENOMEM; - goto out_iounmap_all; + goto out_iounmap_ctrl; } } @@ -10244,7 +10244,7 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba) dev_err(&pdev->dev, "ioremap failed for SLI4 HBA dpp registers.\n"); error = -ENOMEM; - goto out_iounmap_ctrl; + goto out_iounmap_all; } phba->pci_bar4_memmap_p = phba->sli4_hba.dpp_regs_memmap_p; } @@ -10269,9 +10269,11 @@ lpfc_sli4_pci_mem_setup(struct lpfc_hba *phba) return 0; out_iounmap_all: - iounmap(phba->sli4_hba.drbl_regs_memmap_p); + if (phba->sli4_hba.drbl_regs_memmap_p) + iounmap(phba->sli4_hba.drbl_regs_memmap_p); out_iounmap_ctrl: - iounmap(phba->sli4_hba.ctrl_regs_memmap_p); + if (phba->sli4_hba.ctrl_regs_memmap_p) + iounmap(phba->sli4_hba.ctrl_regs_memmap_p); out_iounmap_conf: iounmap(phba->sli4_hba.conf_regs_memmap_p); From c229821510dfe35e89899b00ec34f9f5876fbbd2 Mon Sep 17 00:00:00 2001 From: Xin Liu Date: Thu, 6 Apr 2023 20:26:22 +0800 Subject: [PATCH 096/755] bpf, sockmap: fix deadlocks in the sockhash and sockmap [ Upstream commit ed17aa92dc56b6d8883e4b7a8f1c6fbf5ed6cd29 ] When huang uses sched_switch tracepoint, the tracepoint does only one thing in the mounted ebpf program, which deletes the fixed elements in sockhash ([0]) It seems that elements in sockhash are rarely actively deleted by users or ebpf program. Therefore, we do not pay much attention to their deletion. Compared with hash maps, sockhash only provides spin_lock_bh protection. This causes it to appear to have self-locking behavior in the interrupt context. [0]:https://lore.kernel.org/all/CABcoxUayum5oOqFMMqAeWuS8+EzojquSOSyDA3J_2omY=2EeAg@mail.gmail.com/ Reported-by: Hsin-Wei Hung Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by: Xin Liu Acked-by: John Fastabend Link: https://lore.kernel.org/r/20230406122622.109978-1-liuxin350@huawei.com Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin --- net/core/sock_map.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/net/core/sock_map.c b/net/core/sock_map.c index 5bce6d4d2057..78f2b6b265b2 100644 --- a/net/core/sock_map.c +++ b/net/core/sock_map.c @@ -322,8 +322,9 @@ static int __sock_map_delete(struct bpf_stab *stab, struct sock *sk_test, { struct sock *sk; int err = 0; + unsigned long flags; - raw_spin_lock_bh(&stab->lock); + raw_spin_lock_irqsave(&stab->lock, flags); sk = *psk; if (!sk_test || sk_test == sk) sk = xchg(psk, NULL); @@ -333,7 +334,7 @@ static int __sock_map_delete(struct bpf_stab *stab, struct sock *sk_test, else err = -EINVAL; - raw_spin_unlock_bh(&stab->lock); + raw_spin_unlock_irqrestore(&stab->lock, flags); return err; } @@ -655,11 +656,12 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key) struct bpf_htab_bucket *bucket; struct bpf_htab_elem *elem; int ret = -ENOENT; + unsigned long flags; hash = sock_hash_bucket_hash(key, key_size); bucket = sock_hash_select_bucket(htab, hash); - raw_spin_lock_bh(&bucket->lock); + raw_spin_lock_irqsave(&bucket->lock, flags); elem = sock_hash_lookup_elem_raw(&bucket->head, hash, key, key_size); if (elem) { hlist_del_rcu(&elem->node); @@ -667,7 +669,7 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key) sock_hash_free_elem(htab, elem); ret = 0; } - raw_spin_unlock_bh(&bucket->lock); + raw_spin_unlock_irqrestore(&bucket->lock, flags); return ret; } From eaaa0c6b054074f39baa12416e35c24987652251 Mon Sep 17 00:00:00 2001 From: Michael Kelley Date: Wed, 8 Jun 2022 11:52:21 -0700 Subject: [PATCH 097/755] nvme: handle the persistent internal error AER [ Upstream commit 2c61c97fb12b806e1c8eb15f04c277ad097ec95e ] In the NVM Express Revision 1.4 spec, Figure 145 describes possible values for an AER with event type "Error" (value 000b). For a Persistent Internal Error (value 03h), the host should perform a controller reset. Add support for this error using code that already exists for doing a controller reset. As part of this support, introduce two utility functions for parsing the AER type and subtype. This new support was tested in a lab environment where we can generate the persistent internal error on demand, and observe both the Linux side and NVMe controller side to see that the controller reset has been done. Signed-off-by: Michael Kelley Signed-off-by: Christoph Hellwig Signed-off-by: Jens Axboe Stable-dep-of: 6622b76fe922 ("nvme: fix async event trace event") Signed-off-by: Sasha Levin --- drivers/nvme/host/core.c | 31 +++++++++++++++++++++++++++++-- include/linux/nvme.h | 4 ++++ 2 files changed, 33 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 029a89aead53..fa5753de5658 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -3976,9 +3976,19 @@ static void nvme_fw_act_work(struct work_struct *work) nvme_get_fw_slot_info(ctrl); } +static u32 nvme_aer_type(u32 result) +{ + return result & 0x7; +} + +static u32 nvme_aer_subtype(u32 result) +{ + return (result & 0xff00) >> 8; +} + static void nvme_handle_aen_notice(struct nvme_ctrl *ctrl, u32 result) { - u32 aer_notice_type = (result & 0xff00) >> 8; + u32 aer_notice_type = nvme_aer_subtype(result); trace_nvme_async_event(ctrl, aer_notice_type); @@ -4011,11 +4021,19 @@ static void nvme_handle_aen_notice(struct nvme_ctrl *ctrl, u32 result) } } +static void nvme_handle_aer_persistent_error(struct nvme_ctrl *ctrl) +{ + trace_nvme_async_event(ctrl, NVME_AER_ERROR); + dev_warn(ctrl->device, "resetting controller due to AER\n"); + nvme_reset_ctrl(ctrl); +} + void nvme_complete_async_event(struct nvme_ctrl *ctrl, __le16 status, volatile union nvme_result *res) { u32 result = le32_to_cpu(res->u32); - u32 aer_type = result & 0x07; + u32 aer_type = nvme_aer_type(result); + u32 aer_subtype = nvme_aer_subtype(result); if (le16_to_cpu(status) >> 1 != NVME_SC_SUCCESS) return; @@ -4025,6 +4043,15 @@ void nvme_complete_async_event(struct nvme_ctrl *ctrl, __le16 status, nvme_handle_aen_notice(ctrl, result); break; case NVME_AER_ERROR: + /* + * For a persistent internal error, don't run async_event_work + * to submit a new AER. The controller reset will do it. + */ + if (aer_subtype == NVME_AER_ERROR_PERSIST_INT_ERR) { + nvme_handle_aer_persistent_error(ctrl); + return; + } + fallthrough; case NVME_AER_SMART: case NVME_AER_CSS: case NVME_AER_VS: diff --git a/include/linux/nvme.h b/include/linux/nvme.h index ff0ee07b1e8f..dd2801c28b99 100644 --- a/include/linux/nvme.h +++ b/include/linux/nvme.h @@ -522,6 +522,10 @@ enum { NVME_AER_VS = 7, }; +enum { + NVME_AER_ERROR_PERSIST_INT_ERR = 0x03, +}; + enum { NVME_AER_NOTICE_NS_CHANGED = 0x00, NVME_AER_NOTICE_FW_ACT_STARTING = 0x01, From b1e6b3fd11041c3d6db811fa6b313996101bd6a6 Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Wed, 5 Apr 2023 14:57:20 -0700 Subject: [PATCH 098/755] nvme: fix async event trace event [ Upstream commit 6622b76fe922b94189499a90ccdb714a4a8d0773 ] Mixing AER Event Type and Event Info has masking clashes. Just print the event type, but also include the event info of the AER result in the trace. Fixes: 09bd1ff4b15143b ("nvme-core: add async event trace helper") Reported-by: Nate Thornton Reviewed-by: Sagi Grimberg Reviewed-by: Minwoo Im Reviewed-by: Chaitanya Kulkarni Signed-off-by: Keith Busch Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin --- drivers/nvme/host/core.c | 5 +---- drivers/nvme/host/trace.h | 15 ++++++--------- 2 files changed, 7 insertions(+), 13 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index fa5753de5658..9144ed14b074 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -3990,8 +3990,6 @@ static void nvme_handle_aen_notice(struct nvme_ctrl *ctrl, u32 result) { u32 aer_notice_type = nvme_aer_subtype(result); - trace_nvme_async_event(ctrl, aer_notice_type); - switch (aer_notice_type) { case NVME_AER_NOTICE_NS_CHANGED: set_bit(NVME_AER_NOTICE_NS_CHANGED, &ctrl->events); @@ -4023,7 +4021,6 @@ static void nvme_handle_aen_notice(struct nvme_ctrl *ctrl, u32 result) static void nvme_handle_aer_persistent_error(struct nvme_ctrl *ctrl) { - trace_nvme_async_event(ctrl, NVME_AER_ERROR); dev_warn(ctrl->device, "resetting controller due to AER\n"); nvme_reset_ctrl(ctrl); } @@ -4038,6 +4035,7 @@ void nvme_complete_async_event(struct nvme_ctrl *ctrl, __le16 status, if (le16_to_cpu(status) >> 1 != NVME_SC_SUCCESS) return; + trace_nvme_async_event(ctrl, result); switch (aer_type) { case NVME_AER_NOTICE: nvme_handle_aen_notice(ctrl, result); @@ -4055,7 +4053,6 @@ void nvme_complete_async_event(struct nvme_ctrl *ctrl, __le16 status, case NVME_AER_SMART: case NVME_AER_CSS: case NVME_AER_VS: - trace_nvme_async_event(ctrl, aer_type); ctrl->aen_result = result; break; default: diff --git a/drivers/nvme/host/trace.h b/drivers/nvme/host/trace.h index 35bac7a25422..700fdce2ecf1 100644 --- a/drivers/nvme/host/trace.h +++ b/drivers/nvme/host/trace.h @@ -127,15 +127,12 @@ TRACE_EVENT(nvme_async_event, ), TP_printk("nvme%d: NVME_AEN=%#08x [%s]", __entry->ctrl_id, __entry->result, - __print_symbolic(__entry->result, - aer_name(NVME_AER_NOTICE_NS_CHANGED), - aer_name(NVME_AER_NOTICE_ANA), - aer_name(NVME_AER_NOTICE_FW_ACT_STARTING), - aer_name(NVME_AER_NOTICE_DISC_CHANGED), - aer_name(NVME_AER_ERROR), - aer_name(NVME_AER_SMART), - aer_name(NVME_AER_CSS), - aer_name(NVME_AER_VS)) + __print_symbolic(__entry->result & 0x7, + aer_name(NVME_AER_ERROR), + aer_name(NVME_AER_SMART), + aer_name(NVME_AER_NOTICE), + aer_name(NVME_AER_CSS), + aer_name(NVME_AER_VS)) ) ); From d5fdcd2384ff6749f4eb259abf3a48d14120df37 Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Wed, 12 Apr 2023 16:49:04 +0800 Subject: [PATCH 099/755] nvme-fcloop: fix "inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage" [ Upstream commit 4f86a6ff6fbd891232dda3ca97fd1b9630b59809 ] fcloop_fcp_op() could be called from flush request's ->end_io(flush_end_io) in which the spinlock of fq->mq_flush_lock is grabbed with irq saved/disabled. So fcloop_fcp_op() can't call spin_unlock_irq(&tfcp_req->reqlock) simply which enables irq unconditionally. Fixes the warning by switching to spin_lock_irqsave()/spin_unlock_irqrestore() Fixes: c38dbbfab1bc ("nvme-fcloop: fix inconsistent lock state warnings") Reported-by: Yi Zhang Signed-off-by: Ming Lei Reviewed-by: Ewan D. Milne Tested-by: Yi Zhang Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin --- drivers/nvme/target/fcloop.c | 48 ++++++++++++++++++++---------------- 1 file changed, 27 insertions(+), 21 deletions(-) diff --git a/drivers/nvme/target/fcloop.c b/drivers/nvme/target/fcloop.c index b50b53db3746..34345c45a3e5 100644 --- a/drivers/nvme/target/fcloop.c +++ b/drivers/nvme/target/fcloop.c @@ -431,10 +431,11 @@ fcloop_fcp_recv_work(struct work_struct *work) struct fcloop_fcpreq *tfcp_req = container_of(work, struct fcloop_fcpreq, fcp_rcv_work); struct nvmefc_fcp_req *fcpreq = tfcp_req->fcpreq; + unsigned long flags; int ret = 0; bool aborted = false; - spin_lock_irq(&tfcp_req->reqlock); + spin_lock_irqsave(&tfcp_req->reqlock, flags); switch (tfcp_req->inistate) { case INI_IO_START: tfcp_req->inistate = INI_IO_ACTIVE; @@ -443,11 +444,11 @@ fcloop_fcp_recv_work(struct work_struct *work) aborted = true; break; default: - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); WARN_ON(1); return; } - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); if (unlikely(aborted)) ret = -ECANCELED; @@ -468,8 +469,9 @@ fcloop_fcp_abort_recv_work(struct work_struct *work) container_of(work, struct fcloop_fcpreq, abort_rcv_work); struct nvmefc_fcp_req *fcpreq; bool completed = false; + unsigned long flags; - spin_lock_irq(&tfcp_req->reqlock); + spin_lock_irqsave(&tfcp_req->reqlock, flags); fcpreq = tfcp_req->fcpreq; switch (tfcp_req->inistate) { case INI_IO_ABORTED: @@ -478,11 +480,11 @@ fcloop_fcp_abort_recv_work(struct work_struct *work) completed = true; break; default: - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); WARN_ON(1); return; } - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); if (unlikely(completed)) { /* remove reference taken in original abort downcall */ @@ -494,9 +496,9 @@ fcloop_fcp_abort_recv_work(struct work_struct *work) nvmet_fc_rcv_fcp_abort(tfcp_req->tport->targetport, &tfcp_req->tgt_fcp_req); - spin_lock_irq(&tfcp_req->reqlock); + spin_lock_irqsave(&tfcp_req->reqlock, flags); tfcp_req->fcpreq = NULL; - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); fcloop_call_host_done(fcpreq, tfcp_req, -ECANCELED); /* call_host_done releases reference for abort downcall */ @@ -512,11 +514,12 @@ fcloop_tgt_fcprqst_done_work(struct work_struct *work) struct fcloop_fcpreq *tfcp_req = container_of(work, struct fcloop_fcpreq, tio_done_work); struct nvmefc_fcp_req *fcpreq; + unsigned long flags; - spin_lock_irq(&tfcp_req->reqlock); + spin_lock_irqsave(&tfcp_req->reqlock, flags); fcpreq = tfcp_req->fcpreq; tfcp_req->inistate = INI_IO_COMPLETED; - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); fcloop_call_host_done(fcpreq, tfcp_req, tfcp_req->status); } @@ -620,13 +623,14 @@ fcloop_fcp_op(struct nvmet_fc_target_port *tgtport, u32 rsplen = 0, xfrlen = 0; int fcp_err = 0, active, aborted; u8 op = tgt_fcpreq->op; + unsigned long flags; - spin_lock_irq(&tfcp_req->reqlock); + spin_lock_irqsave(&tfcp_req->reqlock, flags); fcpreq = tfcp_req->fcpreq; active = tfcp_req->active; aborted = tfcp_req->aborted; tfcp_req->active = true; - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); if (unlikely(active)) /* illegal - call while i/o active */ @@ -634,9 +638,9 @@ fcloop_fcp_op(struct nvmet_fc_target_port *tgtport, if (unlikely(aborted)) { /* target transport has aborted i/o prior */ - spin_lock_irq(&tfcp_req->reqlock); + spin_lock_irqsave(&tfcp_req->reqlock, flags); tfcp_req->active = false; - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); tgt_fcpreq->transferred_length = 0; tgt_fcpreq->fcp_error = -ECANCELED; tgt_fcpreq->done(tgt_fcpreq); @@ -693,9 +697,9 @@ fcloop_fcp_op(struct nvmet_fc_target_port *tgtport, break; } - spin_lock_irq(&tfcp_req->reqlock); + spin_lock_irqsave(&tfcp_req->reqlock, flags); tfcp_req->active = false; - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); tgt_fcpreq->transferred_length = xfrlen; tgt_fcpreq->fcp_error = fcp_err; @@ -709,15 +713,16 @@ fcloop_tgt_fcp_abort(struct nvmet_fc_target_port *tgtport, struct nvmefc_tgt_fcp_req *tgt_fcpreq) { struct fcloop_fcpreq *tfcp_req = tgt_fcp_req_to_fcpreq(tgt_fcpreq); + unsigned long flags; /* * mark aborted only in case there were 2 threads in transport * (one doing io, other doing abort) and only kills ops posted * after the abort request */ - spin_lock_irq(&tfcp_req->reqlock); + spin_lock_irqsave(&tfcp_req->reqlock, flags); tfcp_req->aborted = true; - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); tfcp_req->status = NVME_SC_INTERNAL; @@ -753,6 +758,7 @@ fcloop_fcp_abort(struct nvme_fc_local_port *localport, struct fcloop_ini_fcpreq *inireq = fcpreq->private; struct fcloop_fcpreq *tfcp_req; bool abortio = true; + unsigned long flags; spin_lock(&inireq->inilock); tfcp_req = inireq->tfcp_req; @@ -765,7 +771,7 @@ fcloop_fcp_abort(struct nvme_fc_local_port *localport, return; /* break initiator/target relationship for io */ - spin_lock_irq(&tfcp_req->reqlock); + spin_lock_irqsave(&tfcp_req->reqlock, flags); switch (tfcp_req->inistate) { case INI_IO_START: case INI_IO_ACTIVE: @@ -775,11 +781,11 @@ fcloop_fcp_abort(struct nvme_fc_local_port *localport, abortio = false; break; default: - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); WARN_ON(1); return; } - spin_unlock_irq(&tfcp_req->reqlock); + spin_unlock_irqrestore(&tfcp_req->reqlock, flags); if (abortio) /* leave the reference while the work item is scheduled */ From 1fee7e391d99239c1e01b3446ddd523e174693ac Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 13 Apr 2023 20:28:42 +0200 Subject: [PATCH 100/755] bpf, sockmap: Revert buggy deadlock fix in the sockhash and sockmap [ Upstream commit 8c5c2a4898e3d6bad86e29d471e023c8a19ba799 ] syzbot reported a splat and bisected it to recent commit ed17aa92dc56 ("bpf, sockmap: fix deadlocks in the sockhash and sockmap"): [...] WARNING: CPU: 1 PID: 9280 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376 Modules linked in: CPU: 1 PID: 9280 Comm: syz-executor.1 Not tainted 6.2.0-syzkaller-13249-gd319f344561d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376 [...] Call Trace: spin_unlock_bh include/linux/spinlock.h:395 [inline] sock_map_del_link+0x2ea/0x510 net/core/sock_map.c:165 sock_map_unref+0xb0/0x1d0 net/core/sock_map.c:184 sock_hash_delete_elem+0x1ec/0x2a0 net/core/sock_map.c:945 map_delete_elem kernel/bpf/syscall.c:1536 [inline] __sys_bpf+0x2edc/0x53e0 kernel/bpf/syscall.c:5053 __do_sys_bpf kernel/bpf/syscall.c:5166 [inline] __se_sys_bpf kernel/bpf/syscall.c:5164 [inline] __x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5164 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fe8f7c8c169 [...] Revert for now until we have a proper solution. Fixes: ed17aa92dc56 ("bpf, sockmap: fix deadlocks in the sockhash and sockmap") Reported-by: syzbot+49f6cef45247ff249498@syzkaller.appspotmail.com Cc: Hsin-Wei Hung Cc: Xin Liu Cc: John Fastabend Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/000000000000f1db9605f939720e@google.com/ Signed-off-by: Sasha Levin --- net/core/sock_map.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/net/core/sock_map.c b/net/core/sock_map.c index 78f2b6b265b2..5bce6d4d2057 100644 --- a/net/core/sock_map.c +++ b/net/core/sock_map.c @@ -322,9 +322,8 @@ static int __sock_map_delete(struct bpf_stab *stab, struct sock *sk_test, { struct sock *sk; int err = 0; - unsigned long flags; - raw_spin_lock_irqsave(&stab->lock, flags); + raw_spin_lock_bh(&stab->lock); sk = *psk; if (!sk_test || sk_test == sk) sk = xchg(psk, NULL); @@ -334,7 +333,7 @@ static int __sock_map_delete(struct bpf_stab *stab, struct sock *sk_test, else err = -EINVAL; - raw_spin_unlock_irqrestore(&stab->lock, flags); + raw_spin_unlock_bh(&stab->lock); return err; } @@ -656,12 +655,11 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key) struct bpf_htab_bucket *bucket; struct bpf_htab_elem *elem; int ret = -ENOENT; - unsigned long flags; hash = sock_hash_bucket_hash(key, key_size); bucket = sock_hash_select_bucket(htab, hash); - raw_spin_lock_irqsave(&bucket->lock, flags); + raw_spin_lock_bh(&bucket->lock); elem = sock_hash_lookup_elem_raw(&bucket->head, hash, key, key_size); if (elem) { hlist_del_rcu(&elem->node); @@ -669,7 +667,7 @@ static int sock_hash_delete_elem(struct bpf_map *map, void *key) sock_hash_free_elem(htab, elem); ret = 0; } - raw_spin_unlock_irqrestore(&bucket->lock, flags); + raw_spin_unlock_bh(&bucket->lock); return ret; } From 8c5d5d7ffd1e76734811b8ea5417cf0432b9952c Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Fri, 10 Mar 2023 15:38:53 +0800 Subject: [PATCH 101/755] md/raid10: fix leak of 'r10bio->remaining' for recovery [ Upstream commit 26208a7cffd0c7cbf14237ccd20c7270b3ffeb7e ] raid10_sync_request() will add 'r10bio->remaining' for both rdev and replacement rdev. However, if the read io fails, recovery_request_write() returns without issuing the write io, in this case, end_sync_request() is only called once and 'remaining' is leaked, cause an io hang. Fix the problem by decreasing 'remaining' according to if 'bio' and 'repl_bio' is valid. Fixes: 24afd80d99f8 ("md/raid10: handle recovery of replacement devices.") Signed-off-by: Yu Kuai Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20230310073855.1337560-5-yukuai1@huaweicloud.com Signed-off-by: Sasha Levin --- drivers/md/raid10.c | 23 +++++++++++++---------- 1 file changed, 13 insertions(+), 10 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 9fcc141e1ad6..dd91385a3526 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2229,11 +2229,22 @@ static void recovery_request_write(struct mddev *mddev, struct r10bio *r10_bio) { struct r10conf *conf = mddev->private; int d; - struct bio *wbio, *wbio2; + struct bio *wbio = r10_bio->devs[1].bio; + struct bio *wbio2 = r10_bio->devs[1].repl_bio; + + /* Need to test wbio2->bi_end_io before we call + * generic_make_request as if the former is NULL, + * the latter is free to free wbio2. + */ + if (wbio2 && !wbio2->bi_end_io) + wbio2 = NULL; if (!test_bit(R10BIO_Uptodate, &r10_bio->state)) { fix_recovery_read_error(r10_bio); - end_sync_request(r10_bio); + if (wbio->bi_end_io) + end_sync_request(r10_bio); + if (wbio2) + end_sync_request(r10_bio); return; } @@ -2242,14 +2253,6 @@ static void recovery_request_write(struct mddev *mddev, struct r10bio *r10_bio) * and submit the write request */ d = r10_bio->devs[1].devnum; - wbio = r10_bio->devs[1].bio; - wbio2 = r10_bio->devs[1].repl_bio; - /* Need to test wbio2->bi_end_io before we call - * generic_make_request as if the former is NULL, - * the latter is free to free wbio2. - */ - if (wbio2 && !wbio2->bi_end_io) - wbio2 = NULL; if (wbio->bi_end_io) { atomic_inc(&conf->mirrors[d].rdev->nr_pending); md_sync_acct(conf->mirrors[d].rdev->bdev, bio_sectors(wbio)); From b6460f68c1cc95a80d089af402be501619f228e4 Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Fri, 10 Mar 2023 15:38:54 +0800 Subject: [PATCH 102/755] md/raid10: fix memleak for 'conf->bio_split' [ Upstream commit c9ac2acde53f5385de185bccf6aaa91cf9ac1541 ] In the error path of raid10_run(), 'conf' need be freed, however, 'conf->bio_split' is missed and memory will be leaked. Since there are 3 places to free 'conf', factor out a helper to fix the problem. Fixes: fc9977dd069e ("md/raid10: simplify the splitting of requests.") Signed-off-by: Yu Kuai Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20230310073855.1337560-6-yukuai1@huaweicloud.com Signed-off-by: Sasha Levin --- drivers/md/raid10.c | 37 +++++++++++++++++-------------------- 1 file changed, 17 insertions(+), 20 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index dd91385a3526..68447e152505 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3635,6 +3635,20 @@ static int setup_geo(struct geom *geo, struct mddev *mddev, enum geo_type new) return nc*fc; } +static void raid10_free_conf(struct r10conf *conf) +{ + if (!conf) + return; + + mempool_exit(&conf->r10bio_pool); + kfree(conf->mirrors); + kfree(conf->mirrors_old); + kfree(conf->mirrors_new); + safe_put_page(conf->tmppage); + bioset_exit(&conf->bio_split); + kfree(conf); +} + static struct r10conf *setup_conf(struct mddev *mddev) { struct r10conf *conf = NULL; @@ -3717,13 +3731,7 @@ static struct r10conf *setup_conf(struct mddev *mddev) return conf; out: - if (conf) { - mempool_exit(&conf->r10bio_pool); - kfree(conf->mirrors); - safe_put_page(conf->tmppage); - bioset_exit(&conf->bio_split); - kfree(conf); - } + raid10_free_conf(conf); return ERR_PTR(err); } @@ -3937,10 +3945,7 @@ static int raid10_run(struct mddev *mddev) out_free_conf: md_unregister_thread(&mddev->thread); - mempool_exit(&conf->r10bio_pool); - safe_put_page(conf->tmppage); - kfree(conf->mirrors); - kfree(conf); + raid10_free_conf(conf); mddev->private = NULL; out: return -EIO; @@ -3948,15 +3953,7 @@ out: static void raid10_free(struct mddev *mddev, void *priv) { - struct r10conf *conf = priv; - - mempool_exit(&conf->r10bio_pool); - safe_put_page(conf->tmppage); - kfree(conf->mirrors); - kfree(conf->mirrors_old); - kfree(conf->mirrors_new); - bioset_exit(&conf->bio_split); - kfree(conf); + raid10_free_conf(priv); } static void raid10_quiesce(struct mddev *mddev, int quiesce) From fb3f2f2fa0f3d34f51b0a645014865f56077c908 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Thu, 24 Sep 2020 08:51:33 +0200 Subject: [PATCH 103/755] md: update the optimal I/O size on reshape [ Upstream commit 16ef510139315a2147ee7525796f8dbd4e4b7864 ] The raid5 and raid10 drivers currently update the read-ahead size, but not the optimal I/O size on reshape. To prepare for deriving the read-ahead size from the optimal I/O size make sure it is updated as well. Signed-off-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Reviewed-by: Martin K. Petersen Acked-by: Song Liu Signed-off-by: Jens Axboe Stable-dep-of: f0ddb83da3cb ("md/raid10: fix memleak of md thread") Signed-off-by: Sasha Levin --- drivers/md/raid10.c | 22 ++++++++++++++-------- drivers/md/raid5.c | 10 ++++++++-- 2 files changed, 22 insertions(+), 10 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 68447e152505..b37e3cd4e367 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3735,10 +3735,20 @@ static struct r10conf *setup_conf(struct mddev *mddev) return ERR_PTR(err); } +static void raid10_set_io_opt(struct r10conf *conf) +{ + int raid_disks = conf->geo.raid_disks; + + if (!(conf->geo.raid_disks % conf->geo.near_copies)) + raid_disks /= conf->geo.near_copies; + blk_queue_io_opt(conf->mddev->queue, (conf->mddev->chunk_sectors << 9) * + raid_disks); +} + static int raid10_run(struct mddev *mddev) { struct r10conf *conf; - int i, disk_idx, chunk_size; + int i, disk_idx; struct raid10_info *disk; struct md_rdev *rdev; sector_t size; @@ -3774,18 +3784,13 @@ static int raid10_run(struct mddev *mddev) mddev->thread = conf->thread; conf->thread = NULL; - chunk_size = mddev->chunk_sectors << 9; if (mddev->queue) { blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors); blk_queue_max_write_same_sectors(mddev->queue, 0); blk_queue_max_write_zeroes_sectors(mddev->queue, 0); - blk_queue_io_min(mddev->queue, chunk_size); - if (conf->geo.raid_disks % conf->geo.near_copies) - blk_queue_io_opt(mddev->queue, chunk_size * conf->geo.raid_disks); - else - blk_queue_io_opt(mddev->queue, chunk_size * - (conf->geo.raid_disks / conf->geo.near_copies)); + blk_queue_io_min(mddev->queue, mddev->chunk_sectors << 9); + raid10_set_io_opt(conf); } rdev_for_each(rdev, mddev) { @@ -4748,6 +4753,7 @@ static void end_reshape(struct r10conf *conf) stripe /= conf->geo.near_copies; if (conf->mddev->queue->backing_dev_info->ra_pages < 2 * stripe) conf->mddev->queue->backing_dev_info->ra_pages = 2 * stripe; + raid10_set_io_opt(conf); } conf->fullsync = 0; } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index d0c3f49c8c16..113ba084fab4 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -7159,6 +7159,12 @@ static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded return 0; } +static void raid5_set_io_opt(struct r5conf *conf) +{ + blk_queue_io_opt(conf->mddev->queue, (conf->chunk_sectors << 9) * + (conf->raid_disks - conf->max_degraded)); +} + static int raid5_run(struct mddev *mddev) { struct r5conf *conf; @@ -7448,8 +7454,7 @@ static int raid5_run(struct mddev *mddev) chunk_size = mddev->chunk_sectors << 9; blk_queue_io_min(mddev->queue, chunk_size); - blk_queue_io_opt(mddev->queue, chunk_size * - (conf->raid_disks - conf->max_degraded)); + raid5_set_io_opt(conf); mddev->queue->limits.raid_partial_stripes_expensive = 1; /* * We can only discard a whole stripe. It doesn't make sense to @@ -8043,6 +8048,7 @@ static void end_reshape(struct r5conf *conf) / PAGE_SIZE); if (conf->mddev->queue->backing_dev_info->ra_pages < 2 * stripe) conf->mddev->queue->backing_dev_info->ra_pages = 2 * stripe; + raid5_set_io_opt(conf); } } } From 3725b35fc0e5e4eea0434ef625f3d92f3059d080 Mon Sep 17 00:00:00 2001 From: Yu Kuai Date: Fri, 10 Mar 2023 15:38:55 +0800 Subject: [PATCH 104/755] md/raid10: fix memleak of md thread [ Upstream commit f0ddb83da3cbbf8a1f9087a642c448ff52ee9abd ] In raid10_run(), if setup_conf() succeed and raid10_run() failed before setting 'mddev->thread', then in the error path 'conf->thread' is not freed. Fix the problem by setting 'mddev->thread' right after setup_conf(). Fixes: 43a521238aca ("md-cluster: choose correct label when clustered layout is not supported") Signed-off-by: Yu Kuai Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20230310073855.1337560-7-yukuai1@huaweicloud.com Signed-off-by: Sasha Levin --- drivers/md/raid10.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index b37e3cd4e367..c792683a0dea 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3769,6 +3769,9 @@ static int raid10_run(struct mddev *mddev) if (!conf) goto out; + mddev->thread = conf->thread; + conf->thread = NULL; + if (mddev_is_clustered(conf->mddev)) { int fc, fo; @@ -3781,9 +3784,6 @@ static int raid10_run(struct mddev *mddev) } } - mddev->thread = conf->thread; - conf->thread = NULL; - if (mddev->queue) { blk_queue_max_discard_sectors(mddev->queue, mddev->chunk_sectors); From ffdfaf27ebf1b10ed186eb3edd1a263681403673 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 16 Apr 2023 15:47:38 +0300 Subject: [PATCH 105/755] wifi: iwlwifi: make the loop for card preparation effective [ Upstream commit 28965ec0b5d9112585f725660e2ff13218505ace ] Since we didn't reset t to 0, only the first iteration of the loop did checked the ready bit several times. From the second iteration and on, we just tested the bit once and continued to the next iteration. Reported-and-tested-by: Lorenzo Zolfanelli Link: https://bugzilla.kernel.org/show_bug.cgi?id=216452 Fixes: 289e5501c314 ("iwlwifi: fix the preparation of the card") Signed-off-by: Emmanuel Grumbach Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230416154301.615b683ab9c8.Ic52c3229d3345b0064fa34263293db095d88daf8@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index 8915030030c4..3a93a7b8ba0a 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -630,7 +630,6 @@ static int iwl_pcie_set_hw_ready(struct iwl_trans *trans) int iwl_pcie_prepare_card_hw(struct iwl_trans *trans) { int ret; - int t = 0; int iter; IWL_DEBUG_INFO(trans, "iwl_trans_prepare_card_hw enter\n"); @@ -645,6 +644,8 @@ int iwl_pcie_prepare_card_hw(struct iwl_trans *trans) usleep_range(1000, 2000); for (iter = 0; iter < 10; iter++) { + int t = 0; + /* If HW is not ready, prepare the conditions to check again */ iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_PREPARE); From ae23fc2b230a0a8ec5f1337786caf9880e606f06 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 17 Apr 2023 11:41:33 +0300 Subject: [PATCH 106/755] wifi: iwlwifi: mvm: check firmware response size [ Upstream commit 13513cec93ac9902d0b896976d8bab3758a9881c ] Check the firmware response size for responses to the memory read/write command in debugfs before using it. Fixes: 2b55f43f8e47 ("iwlwifi: mvm: Add mem debugfs entry") Signed-off-by: Johannes Berg Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230417113648.0d56fcaf68ee.I70e9571f3ed7263929b04f8fabad23c9b999e4ea@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c index 524f9dd2323d..f8785c70842d 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/debugfs.c @@ -1877,6 +1877,11 @@ static ssize_t iwl_dbgfs_mem_read(struct file *file, char __user *user_buf, if (ret < 0) return ret; + if (iwl_rx_packet_payload_len(hcmd.resp_pkt) < sizeof(*rsp)) { + ret = -EIO; + goto out; + } + rsp = (void *)hcmd.resp_pkt->data; if (le32_to_cpu(rsp->status) != DEBUG_MEM_STATUS_SUCCESS) { ret = -ENXIO; @@ -1954,6 +1959,11 @@ static ssize_t iwl_dbgfs_mem_write(struct file *file, if (ret < 0) return ret; + if (iwl_rx_packet_payload_len(hcmd.resp_pkt) < sizeof(*rsp)) { + ret = -EIO; + goto out; + } + rsp = (void *)hcmd.resp_pkt->data; if (rsp->status != DEBUG_MEM_STATUS_SUCCESS) { ret = -ENXIO; From 053b36c50bddf6e84a3cfa8c1e53165ece9a13e0 Mon Sep 17 00:00:00 2001 From: Joe Damato Date: Sun, 16 Apr 2023 19:12:22 +0000 Subject: [PATCH 107/755] ixgbe: Allow flow hash to be set via ethtool [ Upstream commit 4f3ed1293feb9502dc254b05802faf1ad3317ac6 ] ixgbe currently returns `EINVAL` whenever the flowhash it set by ethtool because the ethtool code in the kernel passes a non-zero value for hfunc that ixgbe should allow. When ethtool is called with `ETHTOOL_SRXFHINDIR`, `ethtool_set_rxfh_indir` will call ixgbe's set_rxfh function with `ETH_RSS_HASH_NO_CHANGE`. This value should be accepted. When ethtool is called with `ETHTOOL_SRSSH`, `ethtool_set_rxfh` will call ixgbe's set_rxfh function with `rxfh.hfunc`, which appears to be hardcoded in ixgbe to always be `ETH_RSS_HASH_TOP`. This value should also be accepted. Before this patch: $ sudo ethtool -L eth1 combined 10 $ sudo ethtool -X eth1 default Cannot set RX flow hash configuration: Invalid argument After this patch: $ sudo ethtool -L eth1 combined 10 $ sudo ethtool -X eth1 default $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 10 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 0 1 2 3 4 5 16: 6 7 8 9 0 1 2 3 24: 4 5 6 7 8 9 0 1 ... Fixes: 1c7cf0784e4d ("ixgbe: support for ethtool set_rxfh") Signed-off-by: Joe Damato Reviewed-by: Sridhar Samudrala Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 7c52ae8ac005..babe16ece5aa 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -3008,8 +3008,8 @@ static int ixgbe_set_rxfh(struct net_device *netdev, const u32 *indir, int i; u32 reta_entries = ixgbe_rss_indir_tbl_entries(adapter); - if (hfunc) - return -EINVAL; + if (hfunc != ETH_RSS_HASH_NO_CHANGE && hfunc != ETH_RSS_HASH_TOP) + return -EOPNOTSUPP; /* Fill out the redirection table */ if (indir) { From 3bf918f90f93c4d8db174f72e5c6b41218a33bad Mon Sep 17 00:00:00 2001 From: Joe Damato Date: Sun, 16 Apr 2023 19:12:23 +0000 Subject: [PATCH 108/755] ixgbe: Enable setting RSS table to default values [ Upstream commit e85d3d55875f7a1079edfbc4e4e98d6f8aea9ac7 ] ethtool uses `ETHTOOL_GRXRINGS` to compute how many queues are supported by RSS. The driver should return the smaller of either: - The maximum number of RSS queues the device supports, OR - The number of RX queues configured Prior to this change, running `ethtool -X $iface default` fails if the number of queues configured is larger than the number supported by RSS, even though changing the queue count correctly resets the flowhash to use all supported queues. Other drivers (for example, i40e) will succeed but the flow hash will reset to support the maximum number of queues supported by RSS, even if that amount is smaller than the configured amount. Prior to this change: $ sudo ethtool -L eth1 combined 20 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 20 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 24: 8 9 10 11 12 13 14 15 32: 0 1 2 3 4 5 6 7 ... You can see that the flowhash was correctly set to use the maximum number of queues supported by the driver (16). However, asking the NIC to reset to "default" fails: $ sudo ethtool -X eth1 default Cannot set RX flow hash configuration: Invalid argument After this change, the flowhash can be reset to default which will use all of the available RSS queues (16) or the configured queue count, whichever is smaller. Starting with eth1 which has 10 queues and a flowhash distributing to all 10 queues: $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 10 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 0 1 2 3 4 5 16: 6 7 8 9 0 1 2 3 ... Increasing the queue count to 48 resets the flowhash to distribute to 16 queues, as it did before this patch: $ sudo ethtool -L eth1 combined 48 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 ... Due to the other bugfix in this series, the flowhash can be set to use queues 0-5: $ sudo ethtool -X eth1 equal 5 $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 0 1 2 8: 3 4 0 1 2 3 4 0 16: 1 2 3 4 0 1 2 3 ... Due to this bugfix, the flowhash can be reset to default and use 16 queues: $ sudo ethtool -X eth1 default $ sudo ethtool -x eth1 RX flow hash indirection table for eth1 with 16 RX ring(s): 0: 0 1 2 3 4 5 6 7 8: 8 9 10 11 12 13 14 15 16: 0 1 2 3 4 5 6 7 ... Fixes: 91cd94bfe4f0 ("ixgbe: add basic support for setting and getting nfc controls") Signed-off-by: Joe Damato Reviewed-by: Sridhar Samudrala Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: Sasha Levin --- .../net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index babe16ece5aa..a43cb7bfcccd 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -2542,6 +2542,14 @@ static int ixgbe_get_rss_hash_opts(struct ixgbe_adapter *adapter, return 0; } +static int ixgbe_rss_indir_tbl_max(struct ixgbe_adapter *adapter) +{ + if (adapter->hw.mac.type < ixgbe_mac_X550) + return 16; + else + return 64; +} + static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, u32 *rule_locs) { @@ -2550,7 +2558,8 @@ static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, switch (cmd->cmd) { case ETHTOOL_GRXRINGS: - cmd->data = adapter->num_rx_queues; + cmd->data = min_t(int, adapter->num_rx_queues, + ixgbe_rss_indir_tbl_max(adapter)); ret = 0; break; case ETHTOOL_GRXCLSRLCNT: @@ -2952,14 +2961,6 @@ static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd) return ret; } -static int ixgbe_rss_indir_tbl_max(struct ixgbe_adapter *adapter) -{ - if (adapter->hw.mac.type < ixgbe_mac_X550) - return 16; - else - return 64; -} - static u32 ixgbe_get_rxfh_key_size(struct net_device *netdev) { return IXGBE_RSS_KEY_SIZE; From 64d2c1cfd04f411b35e907391ef389dc2c810842 Mon Sep 17 00:00:00 2001 From: Stanislav Fomichev Date: Tue, 18 Apr 2023 15:53:38 -0700 Subject: [PATCH 109/755] bpf: Don't EFAULT for getsockopt with optval=NULL [ Upstream commit 00e74ae0863827d944e36e56a4ce1e77e50edb91 ] Some socket options do getsockopt with optval=NULL to estimate the size of the final buffer (which is returned via optlen). This breaks BPF getsockopt assumptions about permitted optval buffer size. Let's enforce these assumptions only when non-NULL optval is provided. Fixes: 0d01da6afc54 ("bpf: implement getsockopt and setsockopt hooks") Reported-by: Martin KaFai Lau Signed-off-by: Stanislav Fomichev Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/ZD7Js4fj5YyI2oLd@google.com/T/#mb68daf700f87a9244a15d01d00c3f0e5b08f49f7 Link: https://lore.kernel.org/bpf/20230418225343.553806-2-sdf@google.com Signed-off-by: Sasha Levin --- kernel/bpf/cgroup.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/kernel/bpf/cgroup.c b/kernel/bpf/cgroup.c index c2f0aa818b7a..08c1246c758e 100644 --- a/kernel/bpf/cgroup.c +++ b/kernel/bpf/cgroup.c @@ -1131,7 +1131,7 @@ int __cgroup_bpf_run_filter_getsockopt(struct sock *sk, int level, goto out; } - if (ctx.optlen > max_optlen || ctx.optlen < 0) { + if (optval && (ctx.optlen > max_optlen || ctx.optlen < 0)) { ret = -EFAULT; goto out; } @@ -1145,8 +1145,11 @@ int __cgroup_bpf_run_filter_getsockopt(struct sock *sk, int level, } if (ctx.optlen != 0) { - if (copy_to_user(optval, ctx.optval, ctx.optlen) || - put_user(ctx.optlen, optlen)) { + if (optval && copy_to_user(optval, ctx.optval, ctx.optlen)) { + ret = -EFAULT; + goto out; + } + if (put_user(ctx.optlen, optlen)) { ret = -EFAULT; goto out; } From 3b9960e21e8bcbc66f08d35c080a1dc06ba9f8e9 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 13 Apr 2023 17:13:19 +0200 Subject: [PATCH 110/755] netfilter: nf_tables: don't write table validation state without mutex [ Upstream commit 9a32e9850686599ed194ccdceb6cd3dd56b2d9b9 ] The ->cleanup callback needs to be removed, this doesn't work anymore as the transaction mutex is already released in the ->abort function. Just do it after a successful validation pass, this either happens from commit or abort phases where transaction mutex is held. Fixes: f102d66b335a ("netfilter: nf_tables: use dedicated mutex to guard transactions") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- include/linux/netfilter/nfnetlink.h | 1 - net/netfilter/nf_tables_api.c | 8 ++------ net/netfilter/nfnetlink.c | 2 -- 3 files changed, 2 insertions(+), 9 deletions(-) diff --git a/include/linux/netfilter/nfnetlink.h b/include/linux/netfilter/nfnetlink.h index f6267e2883f2..41de4156540a 100644 --- a/include/linux/netfilter/nfnetlink.h +++ b/include/linux/netfilter/nfnetlink.h @@ -39,7 +39,6 @@ struct nfnetlink_subsystem { int (*commit)(struct net *net, struct sk_buff *skb); int (*abort)(struct net *net, struct sk_buff *skb, enum nfnl_abort_action action); - void (*cleanup)(struct net *net); bool (*valid_genid)(struct net *net, u32 genid); }; diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 140c24f1b6c6..1a5294eb340c 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -6491,6 +6491,8 @@ static int nf_tables_validate(struct net *net) if (nft_table_validate(net, table) < 0) return -EAGAIN; } + + nft_validate_state_update(net, NFT_VALIDATE_SKIP); break; } @@ -7172,11 +7174,6 @@ static int __nf_tables_abort(struct net *net, enum nfnl_abort_action action) return 0; } -static void nf_tables_cleanup(struct net *net) -{ - nft_validate_state_update(net, NFT_VALIDATE_SKIP); -} - static int nf_tables_abort(struct net *net, struct sk_buff *skb, enum nfnl_abort_action action) { @@ -7208,7 +7205,6 @@ static const struct nfnetlink_subsystem nf_tables_subsys = { .cb = nf_tables_cb, .commit = nf_tables_commit, .abort = nf_tables_abort, - .cleanup = nf_tables_cleanup, .valid_genid = nf_tables_valid_genid, .owner = THIS_MODULE, }; diff --git a/net/netfilter/nfnetlink.c b/net/netfilter/nfnetlink.c index 81c86a156c6c..e3f6e27a9a06 100644 --- a/net/netfilter/nfnetlink.c +++ b/net/netfilter/nfnetlink.c @@ -512,8 +512,6 @@ done: goto replay_abort; } } - if (ss->cleanup) - ss->cleanup(net); nfnl_err_deliver(&err_list, oskb); kfree_skb(skb); From 27c468ec1af113f6ae94fb5378f65e6038bd16e7 Mon Sep 17 00:00:00 2001 From: Ziyang Xuan Date: Thu, 20 Apr 2023 20:40:35 +0800 Subject: [PATCH 111/755] ipv4: Fix potential uninit variable access bug in __ip_make_skb() [ Upstream commit 99e5acae193e369b71217efe6f1dad42f3f18815 ] Like commit ea30388baebc ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()"). icmphdr does not in skb linear region under the scenario of SOCK_RAW socket. Access icmp_hdr(skb)->type directly will trigger the uninit variable access bug. Use a local variable icmp_type to carry the correct value in different scenarios. Fixes: 96793b482540 ("[IPV4]: Add ICMPMsgStats MIB (RFC 4293)") Reviewed-by: Willem de Bruijn Signed-off-by: Ziyang Xuan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/ipv4/ip_output.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 418e93987800..08ccb501ff0c 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -1559,9 +1559,19 @@ struct sk_buff *__ip_make_skb(struct sock *sk, cork->dst = NULL; skb_dst_set(skb, &rt->dst); - if (iph->protocol == IPPROTO_ICMP) - icmp_out_count(net, ((struct icmphdr *) - skb_transport_header(skb))->type); + if (iph->protocol == IPPROTO_ICMP) { + u8 icmp_type; + + /* For such sockets, transhdrlen is zero when do ip_append_data(), + * so icmphdr does not in skb linear region and can not get icmp_type + * by icmp_hdr(skb)->type. + */ + if (sk->sk_type == SOCK_RAW && !inet_sk(sk)->hdrincl) + icmp_type = fl4->fl4_icmp_type; + else + icmp_type = icmp_hdr(skb)->type; + icmp_out_count(net, icmp_type); + } ip_cork_release(cork); out: From de0ffb5145c9f418ad76f00e58d4b91c680410b2 Mon Sep 17 00:00:00 2001 From: Liu Jian Date: Fri, 14 Apr 2023 18:30:06 +0800 Subject: [PATCH 112/755] Revert "Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work" [ Upstream commit db2bf510bd5d57f064d9e1db395ed86a08320c54 ] This reverts commit 1e9ac114c4428fdb7ff4635b45d4f46017e8916f. This patch introduces a possible null-ptr-def problem. Revert it. And the fixed bug by this patch have resolved by commit 73f7b171b7c0 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to race condition"). Fixes: 1e9ac114c442 ("Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work") Signed-off-by: Liu Jian Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin --- drivers/bluetooth/btsdio.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/bluetooth/btsdio.c b/drivers/bluetooth/btsdio.c index 81125fb18035..fd9571d5fdac 100644 --- a/drivers/bluetooth/btsdio.c +++ b/drivers/bluetooth/btsdio.c @@ -343,7 +343,6 @@ static void btsdio_remove(struct sdio_func *func) BT_DBG("func %p", func); - cancel_work_sync(&data->work); if (!data) return; From 9ef809945edddb3158259784f063df4b69446e34 Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Fri, 21 Apr 2023 11:52:55 -0700 Subject: [PATCH 113/755] netlink: Use copy_to_user() for optval in netlink_getsockopt(). [ Upstream commit d913d32cc2707e9cd24fe6fa6d7d470e9c728980 ] Brad Spencer provided a detailed report [0] that when calling getsockopt() for AF_NETLINK, some SOL_NETLINK options set only 1 byte even though such options require at least sizeof(int) as length. The options return a flag value that fits into 1 byte, but such behaviour confuses users who do not initialise the variable before calling getsockopt() and do not strictly check the returned value as char. Currently, netlink_getsockopt() uses put_user() to copy data to optlen and optval, but put_user() casts the data based on the pointer, char *optval. As a result, only 1 byte is set to optval. To avoid this behaviour, we need to use copy_to_user() or cast optval for put_user(). Note that this changes the behaviour on big-endian systems, but we document that the size of optval is int in the man page. $ man 7 netlink ... Socket options To set or get a netlink socket option, call getsockopt(2) to read or setsockopt(2) to write the option with the option level argument set to SOL_NETLINK. Unless otherwise noted, optval is a pointer to an int. Fixes: 9a4595bc7e67 ("[NETLINK]: Add set/getsockopt options to support more than 32 groups") Fixes: be0c22a46cfb ("netlink: add NETLINK_BROADCAST_ERROR socket option") Fixes: 38938bfe3489 ("netlink: add NETLINK_NO_ENOBUFS socket flag") Fixes: 0a6a3a23ea6e ("netlink: add NETLINK_CAP_ACK socket option") Fixes: 2d4bc93368f5 ("netlink: extended ACK reporting") Fixes: 89d35528d17d ("netlink: Add new socket option to enable strict checking on dumps") Reported-by: Brad Spencer Link: https://lore.kernel.org/netdev/ZD7VkNWFfp22kTDt@datsun.rim.net/ Signed-off-by: Kuniyuki Iwashima Reviewed-by: Johannes Berg Link: https://lore.kernel.org/r/20230421185255.94606-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- net/netlink/af_netlink.c | 75 ++++++++++++---------------------------- 1 file changed, 23 insertions(+), 52 deletions(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index a232fcbd721c..00f040fb46b9 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1743,7 +1743,8 @@ static int netlink_getsockopt(struct socket *sock, int level, int optname, { struct sock *sk = sock->sk; struct netlink_sock *nlk = nlk_sk(sk); - int len, val, err; + unsigned int flag; + int len, val; if (level != SOL_NETLINK) return -ENOPROTOOPT; @@ -1755,39 +1756,17 @@ static int netlink_getsockopt(struct socket *sock, int level, int optname, switch (optname) { case NETLINK_PKTINFO: - if (len < sizeof(int)) - return -EINVAL; - len = sizeof(int); - val = nlk->flags & NETLINK_F_RECV_PKTINFO ? 1 : 0; - if (put_user(len, optlen) || - put_user(val, optval)) - return -EFAULT; - err = 0; + flag = NETLINK_F_RECV_PKTINFO; break; case NETLINK_BROADCAST_ERROR: - if (len < sizeof(int)) - return -EINVAL; - len = sizeof(int); - val = nlk->flags & NETLINK_F_BROADCAST_SEND_ERROR ? 1 : 0; - if (put_user(len, optlen) || - put_user(val, optval)) - return -EFAULT; - err = 0; + flag = NETLINK_F_BROADCAST_SEND_ERROR; break; case NETLINK_NO_ENOBUFS: - if (len < sizeof(int)) - return -EINVAL; - len = sizeof(int); - val = nlk->flags & NETLINK_F_RECV_NO_ENOBUFS ? 1 : 0; - if (put_user(len, optlen) || - put_user(val, optval)) - return -EFAULT; - err = 0; + flag = NETLINK_F_RECV_NO_ENOBUFS; break; case NETLINK_LIST_MEMBERSHIPS: { - int pos, idx, shift; + int pos, idx, shift, err = 0; - err = 0; netlink_lock_table(); for (pos = 0; pos * 8 < nlk->ngroups; pos += sizeof(u32)) { if (len - pos < sizeof(u32)) @@ -1804,40 +1783,32 @@ static int netlink_getsockopt(struct socket *sock, int level, int optname, if (put_user(ALIGN(nlk->ngroups / 8, sizeof(u32)), optlen)) err = -EFAULT; netlink_unlock_table(); - break; + return err; } case NETLINK_CAP_ACK: - if (len < sizeof(int)) - return -EINVAL; - len = sizeof(int); - val = nlk->flags & NETLINK_F_CAP_ACK ? 1 : 0; - if (put_user(len, optlen) || - put_user(val, optval)) - return -EFAULT; - err = 0; + flag = NETLINK_F_CAP_ACK; break; case NETLINK_EXT_ACK: - if (len < sizeof(int)) - return -EINVAL; - len = sizeof(int); - val = nlk->flags & NETLINK_F_EXT_ACK ? 1 : 0; - if (put_user(len, optlen) || put_user(val, optval)) - return -EFAULT; - err = 0; + flag = NETLINK_F_EXT_ACK; break; case NETLINK_GET_STRICT_CHK: - if (len < sizeof(int)) - return -EINVAL; - len = sizeof(int); - val = nlk->flags & NETLINK_F_STRICT_CHK ? 1 : 0; - if (put_user(len, optlen) || put_user(val, optval)) - return -EFAULT; - err = 0; + flag = NETLINK_F_STRICT_CHK; break; default: - err = -ENOPROTOOPT; + return -ENOPROTOOPT; } - return err; + + if (len < sizeof(int)) + return -EINVAL; + + len = sizeof(int); + val = nlk->flags & flag ? 1 : 0; + + if (put_user(len, optlen) || + copy_to_user(optval, &val, len)) + return -EFAULT; + + return 0; } static void netlink_cmsg_recv_pktinfo(struct msghdr *msg, struct sk_buff *skb) From 638810f5d020f4752e4068d9ddda0829af4bc34d Mon Sep 17 00:00:00 2001 From: Gencen Gan Date: Mon, 24 Apr 2023 23:28:01 +0800 Subject: [PATCH 114/755] net: amd: Fix link leak when verifying config failed [ Upstream commit d325c34d9e7e38d371c0a299d415e9b07f66a1fb ] After failing to verify configuration, it returns directly without releasing link, which may cause memory leak. Paolo Abeni thinks that the whole code of this driver is quite "suboptimal" and looks unmainatained since at least ~15y, so he suggests that we could simply remove the whole driver, please take it into consideration. Simon Horman suggests that the fix label should be set to "Linux-2.6.12-rc2" considering that the problem has existed since the driver was introduced and the commit above doesn't seem to exist in net/net-next. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Gan Gecen Reviewed-by: Dongliang Mu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/amd/nmclan_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/amd/nmclan_cs.c b/drivers/net/ethernet/amd/nmclan_cs.c index 9c152d85840d..c9d2a6f15062 100644 --- a/drivers/net/ethernet/amd/nmclan_cs.c +++ b/drivers/net/ethernet/amd/nmclan_cs.c @@ -652,7 +652,7 @@ static int nmclan_config(struct pcmcia_device *link) } else { pr_notice("mace id not found: %x %x should be 0x40 0x?9\n", sig[0], sig[1]); - return -ENODEV; + goto failed; } } From 602fa8af44fd55a58f9e94eb673e8adad2c6cc46 Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Mon, 24 Apr 2023 15:20:22 -0700 Subject: [PATCH 115/755] tcp/udp: Fix memleaks of sk and zerocopy skbs with TX timestamp. [ Upstream commit 50749f2dd6854a41830996ad302aef2ffaf011d8 ] syzkaller reported [0] memory leaks of an UDP socket and ZEROCOPY skbs. We can reproduce the problem with these sequences: sk = socket(AF_INET, SOCK_DGRAM, 0) sk.setsockopt(SOL_SOCKET, SO_TIMESTAMPING, SOF_TIMESTAMPING_TX_SOFTWARE) sk.setsockopt(SOL_SOCKET, SO_ZEROCOPY, 1) sk.sendto(b'', MSG_ZEROCOPY, ('127.0.0.1', 53)) sk.close() sendmsg() calls msg_zerocopy_alloc(), which allocates a skb, sets skb->cb->ubuf.refcnt to 1, and calls sock_hold(). Here, struct ubuf_info_msgzc indirectly holds a refcnt of the socket. When the skb is sent, __skb_tstamp_tx() clones it and puts the clone into the socket's error queue with the TX timestamp. When the original skb is received locally, skb_copy_ubufs() calls skb_unclone(), and pskb_expand_head() increments skb->cb->ubuf.refcnt. This additional count is decremented while freeing the skb, but struct ubuf_info_msgzc still has a refcnt, so __msg_zerocopy_callback() is not called. The last refcnt is not released unless we retrieve the TX timestamped skb by recvmsg(). Since we clear the error queue in inet_sock_destruct() after the socket's refcnt reaches 0, there is a circular dependency. If we close() the socket holding such skbs, we never call sock_put() and leak the count, sk, and skb. TCP has the same problem, and commit e0c8bccd40fc ("net: stream: purge sk_error_queue in sk_stream_kill_queues()") tried to fix it by calling skb_queue_purge() during close(). However, there is a small chance that skb queued in a qdisc or device could be put into the error queue after the skb_queue_purge() call. In __skb_tstamp_tx(), the cloned skb should not have a reference to the ubuf to remove the circular dependency, but skb_clone() does not call skb_copy_ubufs() for zerocopy skb. So, we need to call skb_orphan_frags_rx() for the cloned skb to call skb_copy_ubufs(). [0]: BUG: memory leak unreferenced object 0xffff88800c6d2d00 (size 1152): comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 cd af e8 81 00 00 00 00 ................ 02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<0000000055636812>] sk_prot_alloc+0x64/0x2a0 net/core/sock.c:2024 [<0000000054d77b7a>] sk_alloc+0x3b/0x800 net/core/sock.c:2083 [<0000000066f3c7e0>] inet_create net/ipv4/af_inet.c:319 [inline] [<0000000066f3c7e0>] inet_create+0x31e/0xe40 net/ipv4/af_inet.c:245 [<000000009b83af97>] __sock_create+0x2ab/0x550 net/socket.c:1515 [<00000000b9b11231>] sock_create net/socket.c:1566 [inline] [<00000000b9b11231>] __sys_socket_create net/socket.c:1603 [inline] [<00000000b9b11231>] __sys_socket_create net/socket.c:1588 [inline] [<00000000b9b11231>] __sys_socket+0x138/0x250 net/socket.c:1636 [<000000004fb45142>] __do_sys_socket net/socket.c:1649 [inline] [<000000004fb45142>] __se_sys_socket net/socket.c:1647 [inline] [<000000004fb45142>] __x64_sys_socket+0x73/0xb0 net/socket.c:1647 [<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd BUG: memory leak unreferenced object 0xffff888017633a00 (size 240): comm "syz-executor392", pid 264, jiffies 4294785440 (age 13.044s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 2d 6d 0c 80 88 ff ff .........-m..... backtrace: [<000000002b1c4368>] __alloc_skb+0x229/0x320 net/core/skbuff.c:497 [<00000000143579a6>] alloc_skb include/linux/skbuff.h:1265 [inline] [<00000000143579a6>] sock_omalloc+0xaa/0x190 net/core/sock.c:2596 [<00000000be626478>] msg_zerocopy_alloc net/core/skbuff.c:1294 [inline] [<00000000be626478>] msg_zerocopy_realloc+0x1ce/0x7f0 net/core/skbuff.c:1370 [<00000000cbfc9870>] __ip_append_data+0x2adf/0x3b30 net/ipv4/ip_output.c:1037 [<0000000089869146>] ip_make_skb+0x26c/0x2e0 net/ipv4/ip_output.c:1652 [<00000000098015c2>] udp_sendmsg+0x1bac/0x2390 net/ipv4/udp.c:1253 [<0000000045e0e95e>] inet_sendmsg+0x10a/0x150 net/ipv4/af_inet.c:819 [<000000008d31bfde>] sock_sendmsg_nosec net/socket.c:714 [inline] [<000000008d31bfde>] sock_sendmsg+0x141/0x190 net/socket.c:734 [<0000000021e21aa4>] __sys_sendto+0x243/0x360 net/socket.c:2117 [<00000000ac0af00c>] __do_sys_sendto net/socket.c:2129 [inline] [<00000000ac0af00c>] __se_sys_sendto net/socket.c:2125 [inline] [<00000000ac0af00c>] __x64_sys_sendto+0xe1/0x1c0 net/socket.c:2125 [<0000000066999e0e>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<0000000066999e0e>] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 [<0000000017f238c1>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY") Fixes: b5947e5d1e71 ("udp: msg_zerocopy") Reported-by: syzbot Signed-off-by: Kuniyuki Iwashima Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/core/skbuff.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 0547aa2c8b13..291d7a9e0483 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -4632,6 +4632,9 @@ void __skb_tstamp_tx(struct sk_buff *orig_skb, skb = alloc_skb(0, GFP_ATOMIC); } else { skb = skb_clone(orig_skb, GFP_ATOMIC); + + if (skb_orphan_frags_rx(skb, GFP_ATOMIC)) + return; } if (!skb) return; From 36fb7843f1c390142ea8049c756cc925ec2643ac Mon Sep 17 00:00:00 2001 From: John Stultz Date: Wed, 8 Mar 2023 20:40:43 +0000 Subject: [PATCH 116/755] pstore: Revert pmsg_lock back to a normal mutex MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 5239a89b06d6b199f133bf0ffea421683187f257 ] This reverts commit 76d62f24db07f22ccf9bc18ca793c27d4ebef721. So while priority inversion on the pmsg_lock is an occasional problem that an rt_mutex would help with, in uses where logging is writing to pmsg heavily from multiple threads, the pmsg_lock can be heavily contended. After this change landed, it was reported that cases where the mutex locking overhead was commonly adding on the order of 10s of usecs delay had suddenly jumped to ~msec delay with rtmutex. It seems the slight differences in the locks under this level of contention causes the normal mutexes to utilize the spinning optimizations, while the rtmutexes end up in the sleeping slowpath (which allows additional threads to pile on trying to take the lock). In this case, it devolves to a worse case senerio where the lock acquisition and scheduling overhead dominates, and each thread is waiting on the order of ~ms to do ~us of work. Obviously, having tons of threads all contending on a single lock for logging is non-optimal, so the proper fix is probably reworking pstore pmsg to have per-cpu buffers so we don't have contention. Additionally, Steven Rostedt has provided some furhter optimizations for rtmutexes that improves the rtmutex spinning path, but at least in my testing, I still see the test tripping into the sleeping path on rtmutexes while utilizing the spinning path with mutexes. But in the short term, lets revert the change to the rt_mutex and go back to normal mutexes to avoid a potentially major performance regression. And we can work on optimizations to both rtmutexes and finer-grained locking for pstore pmsg in the future. Cc: Wei Wang Cc: Midas Chien Cc: "Chunhui Li (李春辉)" Cc: Steven Rostedt Cc: Kees Cook Cc: Anton Vorontsov Cc: "Guilherme G. Piccoli" Cc: Tony Luck Cc: kernel-team@android.com Fixes: 76d62f24db07 ("pstore: Switch pmsg_lock to an rt_mutex to avoid priority inversion") Reported-by: "Chunhui Li (李春辉)" Signed-off-by: John Stultz Signed-off-by: Kees Cook Link: https://lore.kernel.org/r/20230308204043.2061631-1-jstultz@google.com Signed-off-by: Sasha Levin --- fs/pstore/pmsg.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/fs/pstore/pmsg.c b/fs/pstore/pmsg.c index 18cf94b597e0..d8542ec2f38c 100644 --- a/fs/pstore/pmsg.c +++ b/fs/pstore/pmsg.c @@ -7,10 +7,9 @@ #include #include #include -#include #include "internal.h" -static DEFINE_RT_MUTEX(pmsg_lock); +static DEFINE_MUTEX(pmsg_lock); static ssize_t write_pmsg(struct file *file, const char __user *buf, size_t count, loff_t *ppos) @@ -29,9 +28,9 @@ static ssize_t write_pmsg(struct file *file, const char __user *buf, if (!access_ok(buf, count)) return -EFAULT; - rt_mutex_lock(&pmsg_lock); + mutex_lock(&pmsg_lock); ret = psinfo->write_user(&record, buf); - rt_mutex_unlock(&pmsg_lock); + mutex_unlock(&pmsg_lock); return ret ? ret : count; } From 3fb02404c1e09194922733e16949e60e5b9fcd34 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 7 Mar 2023 17:30:37 +0100 Subject: [PATCH 117/755] usb: host: xhci-rcar: remove leftover quirk handling [ Upstream commit 5d67f4861884762ebc2bddb5d667444e45f25782 ] Loading V3 firmware does not need a quirk anymore, remove the leftover code. Fixes: ed8603e11124 ("usb: host: xhci-rcar: Simplify getting the firmware name for R-Car Gen3") Reviewed-by: Geert Uytterhoeven Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20230307163041.3815-10-wsa+renesas@sang-engineering.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/host/xhci-rcar.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 3da75b367f95..5d7835299245 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -74,7 +74,6 @@ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); /* For soc_device_attribute */ #define RCAR_XHCI_FIRMWARE_V2 BIT(0) /* FIRMWARE V2 */ -#define RCAR_XHCI_FIRMWARE_V3 BIT(1) /* FIRMWARE V3 */ static const struct soc_device_attribute rcar_quirks_match[] = { { @@ -147,8 +146,6 @@ static int xhci_rcar_download_firmware(struct usb_hcd *hcd) if (quirks & RCAR_XHCI_FIRMWARE_V2) firmware_name = XHCI_RCAR_FIRMWARE_NAME_V2; - else if (quirks & RCAR_XHCI_FIRMWARE_V3) - firmware_name = XHCI_RCAR_FIRMWARE_NAME_V3; else firmware_name = priv->firmware_name; From ee0e2f7af02af29cd2d3ee5ee1ceca61cdebb821 Mon Sep 17 00:00:00 2001 From: Marco Pagani Date: Wed, 1 Mar 2023 15:03:08 +0100 Subject: [PATCH 118/755] fpga: bridge: fix kernel-doc parameter description [ Upstream commit 7ef1a2c1c9dffa177ecc3ea50b7f5ee63a621137 ] Fix the kernel-doc description for the "struct fpga_image_info *info" parameter of the fpga_bridge_get() function. Fixes: 060ac5c8fa7b ("fpga: bridge: kernel-doc fixes") Signed-off-by: Marco Pagani Reviewed-by: Tom Rix Acked-by: Xu Yilun Link: https://lore.kernel.org/r/20230301140309.512578-1-marpagan@redhat.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/fpga/fpga-bridge.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c index 4bab9028940a..aea4ceeed536 100644 --- a/drivers/fpga/fpga-bridge.c +++ b/drivers/fpga/fpga-bridge.c @@ -115,7 +115,7 @@ static int fpga_bridge_dev_match(struct device *dev, const void *data) /** * fpga_bridge_get - get an exclusive reference to a fpga bridge * @dev: parent device that fpga bridge was registered with - * @info: fpga manager info + * @info: fpga image specific information * * Given a device, get an exclusive reference to a fpga bridge. * From 7d2bc728cc8d15497fd4d7e2d3ecbf403a28438b Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 12 Mar 2023 16:34:28 +0100 Subject: [PATCH 119/755] iio: light: max44009: add missing OF device matching MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit b29c49026c3c05a11f845dba17cad0b3ba06836d ] The driver currently matches only via i2c_device_id, but also has of_device_id table: drivers/iio/light/max44009.c:545:34: error: ‘max44009_of_match’ defined but not used [-Werror=unused-const-variable=] Fixes: 6aef699a7d7e ("iio: light: add driver for MAX44009") Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230312153429.371702-2-krzysztof.kozlowski@linaro.org Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin --- drivers/iio/light/max44009.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/iio/light/max44009.c b/drivers/iio/light/max44009.c index 00ba15499638..5103b1061a77 100644 --- a/drivers/iio/light/max44009.c +++ b/drivers/iio/light/max44009.c @@ -529,6 +529,12 @@ static int max44009_probe(struct i2c_client *client, return devm_iio_device_register(&client->dev, indio_dev); } +static const struct of_device_id max44009_of_match[] = { + { .compatible = "maxim,max44009" }, + { } +}; +MODULE_DEVICE_TABLE(of, max44009_of_match); + static const struct i2c_device_id max44009_id[] = { { "max44009", 0 }, { } @@ -538,18 +544,13 @@ MODULE_DEVICE_TABLE(i2c, max44009_id); static struct i2c_driver max44009_driver = { .driver = { .name = MAX44009_DRV_NAME, + .of_match_table = max44009_of_match, }, .probe = max44009_probe, .id_table = max44009_id, }; module_i2c_driver(max44009_driver); -static const struct of_device_id max44009_of_match[] = { - { .compatible = "maxim,max44009" }, - { } -}; -MODULE_DEVICE_TABLE(of, max44009_of_match); - MODULE_AUTHOR("Robert Eshleman "); MODULE_LICENSE("GPL v2"); MODULE_DESCRIPTION("MAX44009 ambient light sensor driver"); From 0fee5030c09401818c17be0786f2684c1cc1e440 Mon Sep 17 00:00:00 2001 From: Zheng Wang Date: Mon, 20 Mar 2023 14:29:31 +0800 Subject: [PATCH 120/755] usb: gadget: udc: renesas_usb3: Fix use after free bug in renesas_usb3_remove due to race condition [ Upstream commit 2b947f8769be8b8181dc795fd292d3e7120f5204 ] In renesas_usb3_probe, role_work is bound with renesas_usb3_role_work. renesas_usb3_start will be called to start the work. If we remove the driver which will call usbhs_remove, there may be an unfinished work. The possible sequence is as follows: CPU0 CPU1 renesas_usb3_role_work renesas_usb3_remove usb_role_switch_unregister device_unregister kfree(sw) //free usb3->role_sw usb_role_switch_set_role //use usb3->role_sw The usb3->role_sw could be freed under such circumstance and then used in usb_role_switch_set_role. This bug was found by static analysis. And note that removing a driver is a root-only operation, and should never happen in normal case. But the root user may directly remove the device which will also trigger the remove function. Fix it by canceling the work before cleanup in the renesas_usb3_remove. Fixes: 39facfa01c9f ("usb: gadget: udc: renesas_usb3: Add register of usb role switch") Signed-off-by: Zheng Wang Reviewed-by: Yoshihiro Shimoda Link: https://lore.kernel.org/r/20230320062931.505170-1-zyytlz.wz@163.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/gadget/udc/renesas_usb3.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/gadget/udc/renesas_usb3.c b/drivers/usb/gadget/udc/renesas_usb3.c index 0bbd180022aa..e04acf2dfa65 100644 --- a/drivers/usb/gadget/udc/renesas_usb3.c +++ b/drivers/usb/gadget/udc/renesas_usb3.c @@ -2553,6 +2553,7 @@ static int renesas_usb3_remove(struct platform_device *pdev) debugfs_remove_recursive(usb3->dentry); device_remove_file(&pdev->dev, &dev_attr_role); + cancel_work_sync(&usb3->role_work); usb_role_switch_unregister(usb3->role_sw); usb_del_gadget_udc(&usb3->gadget); From 0f31993721f920c068440e765ed0d80e0beabd9e Mon Sep 17 00:00:00 2001 From: "H. Nikolaus Schaller" Date: Thu, 9 Mar 2023 17:56:31 +0100 Subject: [PATCH 121/755] PCI: imx6: Install the fault handler only on compatible match [ Upstream commit 5f5ac460dfe7f4e11f99de9870f240e39189cf72 ] commit bb38919ec56e ("PCI: imx6: Add support for i.MX6 PCIe controller") added a fault hook to this driver in the probe function. So it was only installed if needed. commit bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO") moved it from probe to driver init which installs the hook unconditionally as soon as the driver is compiled into a kernel. When this driver is compiled as a module, the hook is not registered until after the driver has been matched with a .compatible and loaded. commit 415b6185c541 ("PCI: imx6: Fix config read timeout handling") extended the fault handling code. commit 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ") added some protection for non-ARM architectures, but this does not protect non-i.MX ARM architectures. Since fault handlers can be triggered on any architecture for different reasons, there is no guarantee that they will be triggered only for the assumed situation, leading to improper error handling (i.MX6-specific imx6q_pcie_abort_handler) on foreign systems. I had seen strange L3 imprecise external abort messages several times on OMAP4 and OMAP5 devices and couldn't make sense of them until I realized they were related to this unused imx6q driver because I had CONFIG_PCI_IMX6=y. Note that CONFIG_PCI_IMX6=y is useful for kernel binaries that are designed to run on different ARM SoC and be differentiated only by device tree binaries. So turning off CONFIG_PCI_IMX6 is not a solution. Therefore we check the compatible in the init function before registering the fault handler. Link: https://lore.kernel.org/r/e1bcfc3078c82b53aa9b78077a89955abe4ea009.1678380991.git.hns@goldelico.com Fixes: bde4a5a00e76 ("PCI: imx6: Allow probe deferral by reset GPIO") Fixes: 415b6185c541 ("PCI: imx6: Fix config read timeout handling") Fixes: 2d8ed461dbc9 ("PCI: imx6: Add support for i.MX8MQ") Signed-off-by: H. Nikolaus Schaller Signed-off-by: Lorenzo Pieralisi Reviewed-by: Richard Zhu Signed-off-by: Sasha Levin --- drivers/pci/controller/dwc/pci-imx6.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index b34b52b364d5..30c259f63239 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -1295,6 +1295,13 @@ DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_SYNOPSYS, 0xabcd, static int __init imx6_pcie_init(void) { #ifdef CONFIG_ARM + struct device_node *np; + + np = of_find_matching_node(NULL, imx6_pcie_of_match); + if (!np) + return -ENODEV; + of_node_put(np); + /* * Since probe() can be deferred we need to make sure that * hook_fault_code is not called after __init memory is freed From f5ce428e3eaeb01b1e1039272e3d7abbd27ff7e9 Mon Sep 17 00:00:00 2001 From: Barry Song Date: Wed, 3 Mar 2021 11:49:15 +1300 Subject: [PATCH 122/755] genirq: Add IRQF_NO_AUTOEN for request_irq/nmi() [ Upstream commit cbe16f35bee6880becca6f20d2ebf6b457148552 ] Many drivers don't want interrupts enabled automatically via request_irq(). So they are handling this issue by either way of the below two: (1) irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); (2) request_irq(dev, irq...); disable_irq(irq); The code in the second way is silly and unsafe. In the small time gap between request_irq() and disable_irq(), interrupts can still come. The code in the first way is safe though it's subobtimal. Add a new IRQF_NO_AUTOEN flag which can be handed in by drivers to request_irq() and request_nmi(). It prevents the automatic enabling of the requested interrupt/nmi in the same safe way as #1 above. With that the various usage sites of #1 and #2 above can be simplified and corrected. Signed-off-by: Barry Song Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar Cc: dmitry.torokhov@gmail.com Link: https://lore.kernel.org/r/20210302224916.13980-2-song.bao.hua@hisilicon.com Stable-dep-of: 39db65a0a17b ("ASoC: es8316: Handle optional IRQ assignment") Signed-off-by: Sasha Levin --- include/linux/interrupt.h | 4 ++++ kernel/irq/manage.c | 11 +++++++++-- 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 30e92536c78c..01517747214a 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -61,6 +61,9 @@ * interrupt handler after suspending interrupts. For system * wakeup devices users need to implement wakeup detection in * their interrupt handlers. + * IRQF_NO_AUTOEN - Don't enable IRQ or NMI automatically when users request it. + * Users will enable it explicitly by enable_irq() or enable_nmi() + * later. */ #define IRQF_SHARED 0x00000080 #define IRQF_PROBE_SHARED 0x00000100 @@ -74,6 +77,7 @@ #define IRQF_NO_THREAD 0x00010000 #define IRQF_EARLY_RESUME 0x00020000 #define IRQF_COND_SUSPEND 0x00040000 +#define IRQF_NO_AUTOEN 0x00080000 #define IRQF_TIMER (__IRQF_TIMER | IRQF_NO_SUSPEND | IRQF_NO_THREAD) diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index 79214f983624..2a8a5e1779c9 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1610,7 +1610,8 @@ __setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new) irqd_set(&desc->irq_data, IRQD_NO_BALANCING); } - if (irq_settings_can_autoenable(desc)) { + if (!(new->flags & IRQF_NO_AUTOEN) && + irq_settings_can_autoenable(desc)) { irq_startup(desc, IRQ_RESEND, IRQ_START_COND); } else { /* @@ -2041,10 +2042,15 @@ int request_threaded_irq(unsigned int irq, irq_handler_t handler, * which interrupt is which (messes up the interrupt freeing * logic etc). * + * Also shared interrupts do not go well with disabling auto enable. + * The sharing interrupt might request it while it's still disabled + * and then wait for interrupts forever. + * * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and * it cannot be set along with IRQF_NO_SUSPEND. */ if (((irqflags & IRQF_SHARED) && !dev_id) || + ((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN)) || (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) || ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND))) return -EINVAL; @@ -2200,7 +2206,8 @@ int request_nmi(unsigned int irq, irq_handler_t handler, desc = irq_to_desc(irq); - if (!desc || irq_settings_can_autoenable(desc) || + if (!desc || (irq_settings_can_autoenable(desc) && + !(irqflags & IRQF_NO_AUTOEN)) || !irq_settings_can_request(desc) || WARN_ON(irq_settings_is_per_cpu_devid(desc)) || !irq_supports_nmi(desc)) From 9650d5a1e7dfed4af51558ea03382a8bab8f6cee Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sun, 3 Oct 2021 15:22:54 +0200 Subject: [PATCH 123/755] ASoC: es8316: Use IRQF_NO_AUTOEN when requesting the IRQ [ Upstream commit 1cf2aa665901054b140eb71748661ceae99b6b5a ] Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then disabling it immediately after requesting it. This fixes a possible race where the IRQ might trigger between requesting and disabling it; and this also leads to a small code cleanup. Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20211003132255.31743-1-hdegoede@redhat.com Signed-off-by: Mark Brown Stable-dep-of: 39db65a0a17b ("ASoC: es8316: Handle optional IRQ assignment") Signed-off-by: Sasha Levin --- sound/soc/codecs/es8316.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c index b781b28de012..573085f7cfd1 100644 --- a/sound/soc/codecs/es8316.c +++ b/sound/soc/codecs/es8316.c @@ -807,12 +807,9 @@ static int es8316_i2c_probe(struct i2c_client *i2c_client, mutex_init(&es8316->lock); ret = devm_request_threaded_irq(dev, es8316->irq, NULL, es8316_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN, "es8316", es8316); - if (ret == 0) { - /* Gets re-enabled by es8316_set_jack() */ - disable_irq(es8316->irq); - } else { + if (ret) { dev_warn(dev, "Failed to get IRQ %d: %d\n", es8316->irq, ret); es8316->irq = -ENXIO; } From 3547e5bd0d10d987367b0bbb4dc0b4199cc27487 Mon Sep 17 00:00:00 2001 From: Cristian Ciocaltea Date: Tue, 28 Mar 2023 12:49:01 +0300 Subject: [PATCH 124/755] ASoC: es8316: Handle optional IRQ assignment [ Upstream commit 39db65a0a17b54915b269d3685f253a4731f344c ] The driver is able to work fine without relying on a mandatory interrupt being assigned to the I2C device. This is only needed when making use of the jack-detect support. However, the following warning message is always emitted when there is no such interrupt available: es8316 0-0011: Failed to get IRQ 0: -22 Do not attempt to request an IRQ if it is not available/valid. This also ensures the rather misleading message is not displayed anymore. Also note the IRQ validation relies on commit dab472eb931bc291 ("i2c / ACPI: Use 0 to indicate that device does not have interrupt assigned"). Fixes: 822257661031 ("ASoC: es8316: Add jack-detect support") Signed-off-by: Cristian Ciocaltea Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20230328094901.50763-1-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/es8316.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-) diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c index 573085f7cfd1..efeffa0bf2d7 100644 --- a/sound/soc/codecs/es8316.c +++ b/sound/soc/codecs/es8316.c @@ -806,12 +806,14 @@ static int es8316_i2c_probe(struct i2c_client *i2c_client, es8316->irq = i2c_client->irq; mutex_init(&es8316->lock); - ret = devm_request_threaded_irq(dev, es8316->irq, NULL, es8316_irq, - IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN, - "es8316", es8316); - if (ret) { - dev_warn(dev, "Failed to get IRQ %d: %d\n", es8316->irq, ret); - es8316->irq = -ENXIO; + if (es8316->irq > 0) { + ret = devm_request_threaded_irq(dev, es8316->irq, NULL, es8316_irq, + IRQF_TRIGGER_HIGH | IRQF_ONESHOT | IRQF_NO_AUTOEN, + "es8316", es8316); + if (ret) { + dev_warn(dev, "Failed to get IRQ %d: %d\n", es8316->irq, ret); + es8316->irq = -ENXIO; + } } return devm_snd_soc_register_component(&i2c_client->dev, From 814a9a6de1b1e7ab57d522c860a04fb4cf6a9c07 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Tue, 28 Mar 2023 19:15:29 -0700 Subject: [PATCH 125/755] linux/vt_buffer.h: allow either builtin or modular for macros [ Upstream commit 2b76ffe81e32afd6d318dc4547e2ba8c46207b77 ] Fix build errors on ARCH=alpha when CONFIG_MDA_CONSOLE=m. This allows the ARCH macros to be the only ones defined. In file included from ../drivers/video/console/mdacon.c:37: ../arch/alpha/include/asm/vga.h:17:40: error: expected identifier or '(' before 'volatile' 17 | static inline void scr_writew(u16 val, volatile u16 *addr) | ^~~~~~~~ ../include/linux/vt_buffer.h:24:34: note: in definition of macro 'scr_writew' 24 | #define scr_writew(val, addr) (*(addr) = (val)) | ^~~~ ../include/linux/vt_buffer.h:24:40: error: expected ')' before '=' token 24 | #define scr_writew(val, addr) (*(addr) = (val)) | ^ ../arch/alpha/include/asm/vga.h:17:20: note: in expansion of macro 'scr_writew' 17 | static inline void scr_writew(u16 val, volatile u16 *addr) | ^~~~~~~~~~ ../arch/alpha/include/asm/vga.h:25:29: error: expected identifier or '(' before 'volatile' 25 | static inline u16 scr_readw(volatile const u16 *addr) | ^~~~~~~~ Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: dri-devel@lists.freedesktop.org Cc: linux-fbdev@vger.kernel.org Link: https://lore.kernel.org/r/20230329021529.16188-1-rdunlap@infradead.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- include/linux/vt_buffer.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/vt_buffer.h b/include/linux/vt_buffer.h index 848db1b1569f..919d999a8c1d 100644 --- a/include/linux/vt_buffer.h +++ b/include/linux/vt_buffer.h @@ -16,7 +16,7 @@ #include -#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_MDA_CONSOLE) +#if IS_ENABLED(CONFIG_VGA_CONSOLE) || IS_ENABLED(CONFIG_MDA_CONSOLE) #include #endif From 8632384337038b97910c2f7bb5a3f377aa68d001 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 30 Mar 2023 23:03:40 +0200 Subject: [PATCH 126/755] spi: qup: Don't skip cleanup in remove's error path MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 61f49171a43ab1f80c73c5c88c508770c461e0f2 ] Returning early in a platform driver's remove callback is wrong. In this case the dma resources are not released in the error path. this is never retried later and so this is a permanent leak. To fix this, only skip hardware disabling if waking the device fails. Fixes: 64ff247a978f ("spi: Add Qualcomm QUP SPI controller support") Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230330210341.2459548-2-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/spi-qup.c | 22 +++++++++++++--------- 1 file changed, 13 insertions(+), 9 deletions(-) diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index ead6c211047d..ebcf9f4d5679 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -1276,19 +1276,23 @@ static int spi_qup_remove(struct platform_device *pdev) struct spi_qup *controller = spi_master_get_devdata(master); int ret; - ret = pm_runtime_resume_and_get(&pdev->dev); - if (ret < 0) - return ret; + ret = pm_runtime_get_sync(&pdev->dev); - ret = spi_qup_set_state(controller, QUP_STATE_RESET); - if (ret) - return ret; + if (ret >= 0) { + ret = spi_qup_set_state(controller, QUP_STATE_RESET); + if (ret) + dev_warn(&pdev->dev, "failed to reset controller (%pe)\n", + ERR_PTR(ret)); + + clk_disable_unprepare(controller->cclk); + clk_disable_unprepare(controller->iclk); + } else { + dev_warn(&pdev->dev, "failed to resume, skip hw disable (%pe)\n", + ERR_PTR(ret)); + } spi_qup_release_dma(master); - clk_disable_unprepare(controller->cclk); - clk_disable_unprepare(controller->iclk); - pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); From 170e223240520b284899011b94cbdd48f9e1ad8e Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Sat, 1 Apr 2023 19:59:46 +0200 Subject: [PATCH 127/755] spi: fsl-spi: Fix CPM/QE mode Litte Endian [ Upstream commit c20c57d9868d7f9fd1b2904c7801b07e128f6322 ] CPM has the same problem as QE so for CPM also use the fix added by commit 0398fb70940e ("spi/spi_mpc8xxx: Fix QE mode Litte Endian"): CPM mode uses Little Endian so words > 8 bits are byte swapped. Workaround this by always enforcing wordsize 8 for 16 and 32 bits words. Unfortunately this will not work for LSB transfers where wordsize is > 8 bits so disable these for now. Also limit the workaround to 16 and 32 bits words because it can only work for multiples of 8-bits. Signed-off-by: Christophe Leroy Cc: Joakim Tjernlund Fixes: 0398fb70940e ("spi/spi_mpc8xxx: Fix QE mode Litte Endian") Link: https://lore.kernel.org/r/1b7d3e84b1128f42c1887dd2fb9cdf390f541bc1.1680371809.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/spi-fsl-spi.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index 02b999d48ca1..ae805f91eafa 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -208,8 +208,8 @@ static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, struct spi_device *spi, int bits_per_word) { - /* QE uses Little Endian for words > 8 - * so transform all words > 8 into 8 bits + /* CPM/QE uses Little Endian for words > 8 + * so transform 16 and 32 bits words into 8 bits * Unfortnatly that doesn't work for LSB so * reject these for now */ /* Note: 32 bits word, LSB works iff @@ -217,9 +217,11 @@ static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, if (spi->mode & SPI_LSB_FIRST && bits_per_word > 8) return -EINVAL; - if (bits_per_word > 8) + if (bits_per_word <= 8) + return bits_per_word; + if (bits_per_word == 16 || bits_per_word == 32) return 8; /* pretend its 8 bits */ - return bits_per_word; + return -EINVAL; } static int fsl_spi_setup_transfer(struct spi_device *spi, @@ -249,7 +251,7 @@ static int fsl_spi_setup_transfer(struct spi_device *spi, bits_per_word = mspi_apply_cpu_mode_quirks(cs, spi, mpc8xxx_spi, bits_per_word); - else if (mpc8xxx_spi->flags & SPI_QE) + else bits_per_word = mspi_apply_qe_mode_quirks(cs, spi, bits_per_word); From ca0f4ad2b7a36c799213ef0a213eb977a51e03dc Mon Sep 17 00:00:00 2001 From: "Dae R. Jeong" Date: Mon, 27 Mar 2023 21:01:53 +0900 Subject: [PATCH 128/755] vmci_host: fix a race condition in vmci_host_poll() causing GPF [ Upstream commit ae13381da5ff0e8e084c0323c3cc0a945e43e9c7 ] During fuzzing, a general protection fault is observed in vmci_host_poll(). general protection fault, probably for non-canonical address 0xdffffc0000000019: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x00000000000000c8-0x00000000000000cf] RIP: 0010:__lock_acquire+0xf3/0x5e00 kernel/locking/lockdep.c:4926 <- omitting registers -> Call Trace: lock_acquire+0x1a4/0x4a0 kernel/locking/lockdep.c:5672 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xb3/0x100 kernel/locking/spinlock.c:162 add_wait_queue+0x3d/0x260 kernel/sched/wait.c:22 poll_wait include/linux/poll.h:49 [inline] vmci_host_poll+0xf8/0x2b0 drivers/misc/vmw_vmci/vmci_host.c:174 vfs_poll include/linux/poll.h:88 [inline] do_pollfd fs/select.c:873 [inline] do_poll fs/select.c:921 [inline] do_sys_poll+0xc7c/0x1aa0 fs/select.c:1015 __do_sys_ppoll fs/select.c:1121 [inline] __se_sys_ppoll+0x2cc/0x330 fs/select.c:1101 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x4e/0xa0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Example thread interleaving that causes the general protection fault is as follows: CPU1 (vmci_host_poll) CPU2 (vmci_host_do_init_context) ----- ----- // Read uninitialized context context = vmci_host_dev->context; // Initialize context vmci_host_dev->context = vmci_ctx_create(); vmci_host_dev->ct_type = VMCIOBJ_CONTEXT; if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) { // Dereferencing the wrong pointer poll_wait(..., &context->host_context); } In this scenario, vmci_host_poll() reads vmci_host_dev->context first, and then reads vmci_host_dev->ct_type to check that vmci_host_dev->context is initialized. However, since these two reads are not atomically executed, there is a chance of a race condition as described above. To fix this race condition, read vmci_host_dev->context after checking the value of vmci_host_dev->ct_type so that vmci_host_poll() always reads an initialized context. Reported-by: Dae R. Jeong Fixes: 8bf503991f87 ("VMCI: host side driver implementation.") Signed-off-by: Dae R. Jeong Link: https://lore.kernel.org/r/ZCGFsdBAU4cYww5l@dragonet Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/misc/vmw_vmci/vmci_host.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/misc/vmw_vmci/vmci_host.c b/drivers/misc/vmw_vmci/vmci_host.c index 833e2bd248a5..8ff8d649d9b3 100644 --- a/drivers/misc/vmw_vmci/vmci_host.c +++ b/drivers/misc/vmw_vmci/vmci_host.c @@ -160,10 +160,16 @@ static int vmci_host_close(struct inode *inode, struct file *filp) static __poll_t vmci_host_poll(struct file *filp, poll_table *wait) { struct vmci_host_dev *vmci_host_dev = filp->private_data; - struct vmci_ctx *context = vmci_host_dev->context; + struct vmci_ctx *context; __poll_t mask = 0; if (vmci_host_dev->ct_type == VMCIOBJ_CONTEXT) { + /* + * Read context only if ct_type == VMCIOBJ_CONTEXT to make + * sure that context is initialized + */ + context = vmci_host_dev->context; + /* Check for VMCI calls to this VM context. */ if (wait) poll_wait(filp, &context->host_context.wait_queue, From d3c6d52148a1f096833be118a9ded83edf63de3a Mon Sep 17 00:00:00 2001 From: Miquel Raynal Date: Tue, 4 Apr 2023 18:21:09 +0100 Subject: [PATCH 129/755] of: Fix modalias string generation [ Upstream commit b19a4266c52de78496fe40f0b37580a3b762e67d ] The helper generating an OF based modalias (of_device_get_modalias()) works fine, but due to the use of snprintf() internally it needs a buffer one byte longer than what should be needed just for the entire string (excluding the '\0'). Most users of this helper are sysfs hooks providing the modalias string to users. They all provide a PAGE_SIZE buffer which is way above the number of bytes required to fit the modalias string and hence do not suffer from this issue. There is another user though, of_device_request_module(), which is only called by drivers/usb/common/ulpi.c. This request module function is faulty, but maybe because in most cases there is an alternative, ULPI driver users have not noticed it. In this function, of_device_get_modalias() is called twice. The first time without buffer just to get the number of bytes required by the modalias string (excluding the null byte), and a second time, after buffer allocation, to fill the buffer. The allocation asks for an additional byte, in order to store the trailing '\0'. However, the buffer *length* provided to of_device_get_modalias() excludes this extra byte. The internal use of snprintf() with a length that is exactly the number of bytes to be written has the effect of using the last available byte to store a '\0', which then smashes the last character of the modalias string. Provide the actual size of the buffer to of_device_get_modalias() to fix this issue. Note: the "str[size - 1] = '\0';" line is not really needed as snprintf will anyway end the string with a null byte, but there is a possibility that this function might be called on a struct device_node without compatible, in this case snprintf() would not be executed. So we keep it just to avoid possible unbounded strings. Cc: Stephen Boyd Cc: Peter Chen Fixes: 9c829c097f2f ("of: device: Support loading a module with OF based modalias") Signed-off-by: Miquel Raynal Reviewed-by: Rob Herring Signed-off-by: Srinivas Kandagatla Link: https://lore.kernel.org/r/20230404172148.82422-2-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/of/device.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/of/device.c b/drivers/of/device.c index da8158392010..7fb870097a84 100644 --- a/drivers/of/device.c +++ b/drivers/of/device.c @@ -246,12 +246,15 @@ int of_device_request_module(struct device *dev) if (size < 0) return size; - str = kmalloc(size + 1, GFP_KERNEL); + /* Reserve an additional byte for the trailing '\0' */ + size++; + + str = kmalloc(size, GFP_KERNEL); if (!str) return -ENOMEM; of_device_get_modalias(dev, str, size); - str[size] = '\0'; + str[size - 1] = '\0'; ret = request_module(str); kfree(str); From d6cb7b6868b9aa1cbcbca1355c5f300adfc36f57 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 22 Feb 2023 19:42:58 -0800 Subject: [PATCH 130/755] ia64: mm/contig: fix section mismatch warning/error [ Upstream commit 58deeb4ef3b054498747d0929d94ac53ab90981f ] alloc_per_cpu_data() is called by find_memory(), which is marked as __init. Therefore alloc_per_cpu_data() can also be marked as __init to remedy this modpost problem. WARNING: modpost: vmlinux.o: section mismatch in reference: alloc_per_cpu_data (section: .text) -> memblock_alloc_try_nid (section: .init.text) Link: https://lkml.kernel.org/r/20230223034258.12917-1-rdunlap@infradead.org Fixes: 4b9ddc7cf272 ("[IA64] Fix section mismatch in contig.c version of per_cpu_init()") Signed-off-by: Randy Dunlap Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin --- arch/ia64/mm/contig.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 5b00dc3898e1..f2b40bcd2495 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -81,7 +81,7 @@ skip: return __per_cpu_start + __per_cpu_offset[smp_processor_id()]; } -static inline void +static inline __init void alloc_per_cpu_data(void) { size_t size = PERCPU_PAGE_SIZE * num_possible_cpus(); From 0988baae3984c2d4eee0d0a399f0f3f197690b33 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 22 Feb 2023 19:43:09 -0800 Subject: [PATCH 131/755] ia64: salinfo: placate defined-but-not-used warning [ Upstream commit 0de155752b152d6bcd96b5b5bf20af336abd183a ] When CONFIG_PROC_FS is not set, proc_salinfo_show() is not used. Mark the function as __maybe_unused to quieten the warning message. ../arch/ia64/kernel/salinfo.c:584:12: warning: 'proc_salinfo_show' defined but not used [-Wunused-function] 584 | static int proc_salinfo_show(struct seq_file *m, void *v) | ^~~~~~~~~~~~~~~~~ Link: https://lkml.kernel.org/r/20230223034309.13375-1-rdunlap@infradead.org Fixes: 3f3942aca6da ("proc: introduce proc_create_single{,_data}") Signed-off-by: Randy Dunlap Cc: Christoph Hellwig Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin --- arch/ia64/kernel/salinfo.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/ia64/kernel/salinfo.c b/arch/ia64/kernel/salinfo.c index b392c0a50346..0ec8b55b28ac 100644 --- a/arch/ia64/kernel/salinfo.c +++ b/arch/ia64/kernel/salinfo.c @@ -581,7 +581,7 @@ static int salinfo_cpu_pre_down(unsigned int cpu) * 'data' contains an integer that corresponds to the feature we're * testing */ -static int proc_salinfo_show(struct seq_file *m, void *v) +static int __maybe_unused proc_salinfo_show(struct seq_file *m, void *v) { unsigned long data = (unsigned long)v; seq_puts(m, (sal_platform_features & data) ? "1\n" : "0\n"); From 0fbc62db7e10bedad6fbe433edb26574629ea4d1 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Mar 2023 15:52:45 -0700 Subject: [PATCH 132/755] scripts/gdb: bail early if there are no clocks [ Upstream commit 1d7adbc74c009057ed9dc3112f388e91a9c79acc ] Avoid generating an exception if there are no clocks registered: (gdb) lx-clk-summary enable prepare protect clock count count count rate ------------------------------------------------------------------------ Python Exception : No symbol "clk_root_list" in current context. Error occurred in Python: No symbol "clk_root_list" in current context. Link: https://lkml.kernel.org/r/20230323225246.3302977-1-f.fainelli@gmail.com Fixes: d1e9710b63d8 ("scripts/gdb: initial clk support: lx-clk-summary") Signed-off-by: Florian Fainelli Cc: Jan Kiszka Cc: Kieran Bingham Cc: Leonard Crestez Cc: Stephen Boyd Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin --- scripts/gdb/linux/clk.py | 2 ++ 1 file changed, 2 insertions(+) diff --git a/scripts/gdb/linux/clk.py b/scripts/gdb/linux/clk.py index 061aecfa294e..7a01fdc3e844 100644 --- a/scripts/gdb/linux/clk.py +++ b/scripts/gdb/linux/clk.py @@ -41,6 +41,8 @@ are cached and potentially out of date""" self.show_subtree(child, level + 1) def invoke(self, arg, from_tty): + if utils.gdb_eval_or_none("clk_root_list") is None: + raise gdb.GdbError("No clocks registered") gdb.write(" enable prepare protect \n") gdb.write(" clock count count count rate \n") gdb.write("------------------------------------------------------------------------\n") From 35a2681e993726c5661600c1506b224ddcc01dc7 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 8 Jul 2020 16:32:13 -0700 Subject: [PATCH 133/755] PM: domains: Fix up terminology with parent/child [ Upstream commit 8d87ae48ced2dffd5e7247d19eb4c88be6f1c6f1 ] The genpd infrastructure uses the terms master/slave, but such uses have no external exposures (not even in Documentation/driver-api/pm/*) and are not mandated by nor associated with any external specifications. Change the language used through-out to parent/child. There was one possible exception in the debugfs node "pm_genpd/pm_genpd_summary" but its path has no hits outside of the kernel itself when performing a code search[1], and it seems even this single usage has been non-functional since it was introduced due to a typo in the Python ("apend" instead of correct "append"). Fix the typo while we're at it. Link: https://codesearch.debian.net/ # [1] Signed-off-by: Kees Cook Reviewed-by: Greg Kroah-Hartman Reviewed-by: Kieran Bingham Signed-off-by: Rafael J. Wysocki Stable-dep-of: f19c3c2959e4 ("scripts/gdb: bail early if there are no generic PD") Signed-off-by: Sasha Levin --- drivers/base/power/domain.c | 194 +++++++++++++-------------- drivers/base/power/domain_governor.c | 12 +- include/linux/pm_domain.h | 12 +- scripts/gdb/linux/genpd.py | 12 +- 4 files changed, 115 insertions(+), 115 deletions(-) diff --git a/drivers/base/power/domain.c b/drivers/base/power/domain.c index 4f63a8bc7260..edb791354421 100644 --- a/drivers/base/power/domain.c +++ b/drivers/base/power/domain.c @@ -263,18 +263,18 @@ static int _genpd_reeval_performance_state(struct generic_pm_domain *genpd, /* * Traverse all sub-domains within the domain. This can be * done without any additional locking as the link->performance_state - * field is protected by the master genpd->lock, which is already taken. + * field is protected by the parent genpd->lock, which is already taken. * * Also note that link->performance_state (subdomain's performance state - * requirement to master domain) is different from - * link->slave->performance_state (current performance state requirement + * requirement to parent domain) is different from + * link->child->performance_state (current performance state requirement * of the devices/sub-domains of the subdomain) and so can have a * different value. * * Note that we also take vote from powered-off sub-domains into account * as the same is done for devices right now. */ - list_for_each_entry(link, &genpd->master_links, master_node) { + list_for_each_entry(link, &genpd->parent_links, parent_node) { if (link->performance_state > state) state = link->performance_state; } @@ -285,40 +285,40 @@ static int _genpd_reeval_performance_state(struct generic_pm_domain *genpd, static int _genpd_set_performance_state(struct generic_pm_domain *genpd, unsigned int state, int depth) { - struct generic_pm_domain *master; + struct generic_pm_domain *parent; struct gpd_link *link; - int master_state, ret; + int parent_state, ret; if (state == genpd->performance_state) return 0; - /* Propagate to masters of genpd */ - list_for_each_entry(link, &genpd->slave_links, slave_node) { - master = link->master; + /* Propagate to parents of genpd */ + list_for_each_entry(link, &genpd->child_links, child_node) { + parent = link->parent; - if (!master->set_performance_state) + if (!parent->set_performance_state) continue; - /* Find master's performance state */ + /* Find parent's performance state */ ret = dev_pm_opp_xlate_performance_state(genpd->opp_table, - master->opp_table, + parent->opp_table, state); if (unlikely(ret < 0)) goto err; - master_state = ret; + parent_state = ret; - genpd_lock_nested(master, depth + 1); + genpd_lock_nested(parent, depth + 1); link->prev_performance_state = link->performance_state; - link->performance_state = master_state; - master_state = _genpd_reeval_performance_state(master, - master_state); - ret = _genpd_set_performance_state(master, master_state, depth + 1); + link->performance_state = parent_state; + parent_state = _genpd_reeval_performance_state(parent, + parent_state); + ret = _genpd_set_performance_state(parent, parent_state, depth + 1); if (ret) link->performance_state = link->prev_performance_state; - genpd_unlock(master); + genpd_unlock(parent); if (ret) goto err; @@ -333,26 +333,26 @@ static int _genpd_set_performance_state(struct generic_pm_domain *genpd, err: /* Encountered an error, lets rollback */ - list_for_each_entry_continue_reverse(link, &genpd->slave_links, - slave_node) { - master = link->master; + list_for_each_entry_continue_reverse(link, &genpd->child_links, + child_node) { + parent = link->parent; - if (!master->set_performance_state) + if (!parent->set_performance_state) continue; - genpd_lock_nested(master, depth + 1); + genpd_lock_nested(parent, depth + 1); - master_state = link->prev_performance_state; - link->performance_state = master_state; + parent_state = link->prev_performance_state; + link->performance_state = parent_state; - master_state = _genpd_reeval_performance_state(master, - master_state); - if (_genpd_set_performance_state(master, master_state, depth + 1)) { + parent_state = _genpd_reeval_performance_state(parent, + parent_state); + if (_genpd_set_performance_state(parent, parent_state, depth + 1)) { pr_err("%s: Failed to roll back to %d performance state\n", - master->name, master_state); + parent->name, parent_state); } - genpd_unlock(master); + genpd_unlock(parent); } return ret; @@ -552,7 +552,7 @@ static int genpd_power_off(struct generic_pm_domain *genpd, bool one_dev_on, /* * If sd_count > 0 at this point, one of the subdomains hasn't - * managed to call genpd_power_on() for the master yet after + * managed to call genpd_power_on() for the parent yet after * incrementing it. In that case genpd_power_on() will wait * for us to drop the lock, so we can call .power_off() and let * the genpd_power_on() restore power for us (this shouldn't @@ -566,22 +566,22 @@ static int genpd_power_off(struct generic_pm_domain *genpd, bool one_dev_on, genpd->status = GPD_STATE_POWER_OFF; genpd_update_accounting(genpd); - list_for_each_entry(link, &genpd->slave_links, slave_node) { - genpd_sd_counter_dec(link->master); - genpd_lock_nested(link->master, depth + 1); - genpd_power_off(link->master, false, depth + 1); - genpd_unlock(link->master); + list_for_each_entry(link, &genpd->child_links, child_node) { + genpd_sd_counter_dec(link->parent); + genpd_lock_nested(link->parent, depth + 1); + genpd_power_off(link->parent, false, depth + 1); + genpd_unlock(link->parent); } return 0; } /** - * genpd_power_on - Restore power to a given PM domain and its masters. + * genpd_power_on - Restore power to a given PM domain and its parents. * @genpd: PM domain to power up. * @depth: nesting count for lockdep. * - * Restore power to @genpd and all of its masters so that it is possible to + * Restore power to @genpd and all of its parents so that it is possible to * resume a device belonging to it. */ static int genpd_power_on(struct generic_pm_domain *genpd, unsigned int depth) @@ -594,20 +594,20 @@ static int genpd_power_on(struct generic_pm_domain *genpd, unsigned int depth) /* * The list is guaranteed not to change while the loop below is being - * executed, unless one of the masters' .power_on() callbacks fiddles + * executed, unless one of the parents' .power_on() callbacks fiddles * with it. */ - list_for_each_entry(link, &genpd->slave_links, slave_node) { - struct generic_pm_domain *master = link->master; + list_for_each_entry(link, &genpd->child_links, child_node) { + struct generic_pm_domain *parent = link->parent; - genpd_sd_counter_inc(master); + genpd_sd_counter_inc(parent); - genpd_lock_nested(master, depth + 1); - ret = genpd_power_on(master, depth + 1); - genpd_unlock(master); + genpd_lock_nested(parent, depth + 1); + ret = genpd_power_on(parent, depth + 1); + genpd_unlock(parent); if (ret) { - genpd_sd_counter_dec(master); + genpd_sd_counter_dec(parent); goto err; } } @@ -623,12 +623,12 @@ static int genpd_power_on(struct generic_pm_domain *genpd, unsigned int depth) err: list_for_each_entry_continue_reverse(link, - &genpd->slave_links, - slave_node) { - genpd_sd_counter_dec(link->master); - genpd_lock_nested(link->master, depth + 1); - genpd_power_off(link->master, false, depth + 1); - genpd_unlock(link->master); + &genpd->child_links, + child_node) { + genpd_sd_counter_dec(link->parent); + genpd_lock_nested(link->parent, depth + 1); + genpd_power_off(link->parent, false, depth + 1); + genpd_unlock(link->parent); } return ret; @@ -943,13 +943,13 @@ static bool genpd_present(const struct generic_pm_domain *genpd) #ifdef CONFIG_PM_SLEEP /** - * genpd_sync_power_off - Synchronously power off a PM domain and its masters. + * genpd_sync_power_off - Synchronously power off a PM domain and its parents. * @genpd: PM domain to power off, if possible. * @use_lock: use the lock. * @depth: nesting count for lockdep. * * Check if the given PM domain can be powered off (during system suspend or - * hibernation) and do that if so. Also, in that case propagate to its masters. + * hibernation) and do that if so. Also, in that case propagate to its parents. * * This function is only called in "noirq" and "syscore" stages of system power * transitions. The "noirq" callbacks may be executed asynchronously, thus in @@ -974,21 +974,21 @@ static void genpd_sync_power_off(struct generic_pm_domain *genpd, bool use_lock, genpd->status = GPD_STATE_POWER_OFF; - list_for_each_entry(link, &genpd->slave_links, slave_node) { - genpd_sd_counter_dec(link->master); + list_for_each_entry(link, &genpd->child_links, child_node) { + genpd_sd_counter_dec(link->parent); if (use_lock) - genpd_lock_nested(link->master, depth + 1); + genpd_lock_nested(link->parent, depth + 1); - genpd_sync_power_off(link->master, use_lock, depth + 1); + genpd_sync_power_off(link->parent, use_lock, depth + 1); if (use_lock) - genpd_unlock(link->master); + genpd_unlock(link->parent); } } /** - * genpd_sync_power_on - Synchronously power on a PM domain and its masters. + * genpd_sync_power_on - Synchronously power on a PM domain and its parents. * @genpd: PM domain to power on. * @use_lock: use the lock. * @depth: nesting count for lockdep. @@ -1005,16 +1005,16 @@ static void genpd_sync_power_on(struct generic_pm_domain *genpd, bool use_lock, if (genpd_status_on(genpd)) return; - list_for_each_entry(link, &genpd->slave_links, slave_node) { - genpd_sd_counter_inc(link->master); + list_for_each_entry(link, &genpd->child_links, child_node) { + genpd_sd_counter_inc(link->parent); if (use_lock) - genpd_lock_nested(link->master, depth + 1); + genpd_lock_nested(link->parent, depth + 1); - genpd_sync_power_on(link->master, use_lock, depth + 1); + genpd_sync_power_on(link->parent, use_lock, depth + 1); if (use_lock) - genpd_unlock(link->master); + genpd_unlock(link->parent); } _genpd_power_on(genpd, false); @@ -1454,12 +1454,12 @@ static void genpd_update_cpumask(struct generic_pm_domain *genpd, if (!genpd_is_cpu_domain(genpd)) return; - list_for_each_entry(link, &genpd->slave_links, slave_node) { - struct generic_pm_domain *master = link->master; + list_for_each_entry(link, &genpd->child_links, child_node) { + struct generic_pm_domain *parent = link->parent; - genpd_lock_nested(master, depth + 1); - genpd_update_cpumask(master, cpu, set, depth + 1); - genpd_unlock(master); + genpd_lock_nested(parent, depth + 1); + genpd_update_cpumask(parent, cpu, set, depth + 1); + genpd_unlock(parent); } if (set) @@ -1647,17 +1647,17 @@ static int genpd_add_subdomain(struct generic_pm_domain *genpd, goto out; } - list_for_each_entry(itr, &genpd->master_links, master_node) { - if (itr->slave == subdomain && itr->master == genpd) { + list_for_each_entry(itr, &genpd->parent_links, parent_node) { + if (itr->child == subdomain && itr->parent == genpd) { ret = -EINVAL; goto out; } } - link->master = genpd; - list_add_tail(&link->master_node, &genpd->master_links); - link->slave = subdomain; - list_add_tail(&link->slave_node, &subdomain->slave_links); + link->parent = genpd; + list_add_tail(&link->parent_node, &genpd->parent_links); + link->child = subdomain; + list_add_tail(&link->child_node, &subdomain->child_links); if (genpd_status_on(subdomain)) genpd_sd_counter_inc(genpd); @@ -1671,7 +1671,7 @@ static int genpd_add_subdomain(struct generic_pm_domain *genpd, /** * pm_genpd_add_subdomain - Add a subdomain to an I/O PM domain. - * @genpd: Master PM domain to add the subdomain to. + * @genpd: Leader PM domain to add the subdomain to. * @subdomain: Subdomain to be added. */ int pm_genpd_add_subdomain(struct generic_pm_domain *genpd, @@ -1689,7 +1689,7 @@ EXPORT_SYMBOL_GPL(pm_genpd_add_subdomain); /** * pm_genpd_remove_subdomain - Remove a subdomain from an I/O PM domain. - * @genpd: Master PM domain to remove the subdomain from. + * @genpd: Leader PM domain to remove the subdomain from. * @subdomain: Subdomain to be removed. */ int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd, @@ -1704,19 +1704,19 @@ int pm_genpd_remove_subdomain(struct generic_pm_domain *genpd, genpd_lock(subdomain); genpd_lock_nested(genpd, SINGLE_DEPTH_NESTING); - if (!list_empty(&subdomain->master_links) || subdomain->device_count) { + if (!list_empty(&subdomain->parent_links) || subdomain->device_count) { pr_warn("%s: unable to remove subdomain %s\n", genpd->name, subdomain->name); ret = -EBUSY; goto out; } - list_for_each_entry_safe(link, l, &genpd->master_links, master_node) { - if (link->slave != subdomain) + list_for_each_entry_safe(link, l, &genpd->parent_links, parent_node) { + if (link->child != subdomain) continue; - list_del(&link->master_node); - list_del(&link->slave_node); + list_del(&link->parent_node); + list_del(&link->child_node); kfree(link); if (genpd_status_on(subdomain)) genpd_sd_counter_dec(genpd); @@ -1781,8 +1781,8 @@ int pm_genpd_init(struct generic_pm_domain *genpd, if (IS_ERR_OR_NULL(genpd)) return -EINVAL; - INIT_LIST_HEAD(&genpd->master_links); - INIT_LIST_HEAD(&genpd->slave_links); + INIT_LIST_HEAD(&genpd->parent_links); + INIT_LIST_HEAD(&genpd->child_links); INIT_LIST_HEAD(&genpd->dev_list); genpd_lock_init(genpd); genpd->gov = gov; @@ -1858,15 +1858,15 @@ static int genpd_remove(struct generic_pm_domain *genpd) return -EBUSY; } - if (!list_empty(&genpd->master_links) || genpd->device_count) { + if (!list_empty(&genpd->parent_links) || genpd->device_count) { genpd_unlock(genpd); pr_err("%s: unable to remove %s\n", __func__, genpd->name); return -EBUSY; } - list_for_each_entry_safe(link, l, &genpd->slave_links, slave_node) { - list_del(&link->master_node); - list_del(&link->slave_node); + list_for_each_entry_safe(link, l, &genpd->child_links, child_node) { + list_del(&link->parent_node); + list_del(&link->child_node); kfree(link); } @@ -2793,12 +2793,12 @@ static int genpd_summary_one(struct seq_file *s, /* * Modifications on the list require holding locks on both - * master and slave, so we are safe. + * parent and child, so we are safe. * Also genpd->name is immutable. */ - list_for_each_entry(link, &genpd->master_links, master_node) { - seq_printf(s, "%s", link->slave->name); - if (!list_is_last(&link->master_node, &genpd->master_links)) + list_for_each_entry(link, &genpd->parent_links, parent_node) { + seq_printf(s, "%s", link->child->name); + if (!list_is_last(&link->parent_node, &genpd->parent_links)) seq_puts(s, ", "); } @@ -2826,7 +2826,7 @@ static int summary_show(struct seq_file *s, void *data) struct generic_pm_domain *genpd; int ret = 0; - seq_puts(s, "domain status slaves\n"); + seq_puts(s, "domain status children\n"); seq_puts(s, " /device runtime status\n"); seq_puts(s, "----------------------------------------------------------------------\n"); @@ -2881,8 +2881,8 @@ static int sub_domains_show(struct seq_file *s, void *data) if (ret) return -ERESTARTSYS; - list_for_each_entry(link, &genpd->master_links, master_node) - seq_printf(s, "%s\n", link->slave->name); + list_for_each_entry(link, &genpd->parent_links, parent_node) + seq_printf(s, "%s\n", link->child->name); genpd_unlock(genpd); return ret; diff --git a/drivers/base/power/domain_governor.c b/drivers/base/power/domain_governor.c index daa8c7689f7e..490ed7deb99a 100644 --- a/drivers/base/power/domain_governor.c +++ b/drivers/base/power/domain_governor.c @@ -135,8 +135,8 @@ static bool __default_power_down_ok(struct dev_pm_domain *pd, * * All subdomains have been powered off already at this point. */ - list_for_each_entry(link, &genpd->master_links, master_node) { - struct generic_pm_domain *sd = link->slave; + list_for_each_entry(link, &genpd->parent_links, parent_node) { + struct generic_pm_domain *sd = link->child; s64 sd_max_off_ns = sd->max_off_time_ns; if (sd_max_off_ns < 0) @@ -217,13 +217,13 @@ static bool default_power_down_ok(struct dev_pm_domain *pd) } /* - * We have to invalidate the cached results for the masters, so + * We have to invalidate the cached results for the parents, so * use the observation that default_power_down_ok() is not - * going to be called for any master until this instance + * going to be called for any parent until this instance * returns. */ - list_for_each_entry(link, &genpd->slave_links, slave_node) - link->master->max_off_time_changed = true; + list_for_each_entry(link, &genpd->child_links, child_node) + link->parent->max_off_time_changed = true; genpd->max_off_time_ns = -1; genpd->max_off_time_changed = false; diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index baf02ff91a31..3dffbfa62708 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -95,8 +95,8 @@ struct generic_pm_domain { struct device dev; struct dev_pm_domain domain; /* PM domain operations */ struct list_head gpd_list_node; /* Node in the global PM domains list */ - struct list_head master_links; /* Links with PM domain as a master */ - struct list_head slave_links; /* Links with PM domain as a slave */ + struct list_head parent_links; /* Links with PM domain as a parent */ + struct list_head child_links;/* Links with PM domain as a child */ struct list_head dev_list; /* List of devices */ struct dev_power_governor *gov; struct work_struct power_off_work; @@ -151,10 +151,10 @@ static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd) } struct gpd_link { - struct generic_pm_domain *master; - struct list_head master_node; - struct generic_pm_domain *slave; - struct list_head slave_node; + struct generic_pm_domain *parent; + struct list_head parent_node; + struct generic_pm_domain *child; + struct list_head child_node; /* Sub-domain's per-master domain performance state */ unsigned int performance_state; diff --git a/scripts/gdb/linux/genpd.py b/scripts/gdb/linux/genpd.py index 6ca93bd2949e..39cd1abd8559 100644 --- a/scripts/gdb/linux/genpd.py +++ b/scripts/gdb/linux/genpd.py @@ -49,17 +49,17 @@ Output is similar to /sys/kernel/debug/pm_genpd/pm_genpd_summary''' else: status_string = 'off-{}'.format(genpd['state_idx']) - slave_names = [] + child_names = [] for link in list_for_each_entry( - genpd['master_links'], + genpd['parent_links'], device_link_type.get_type().pointer(), - 'master_node'): - slave_names.apend(link['slave']['name']) + 'parent_node'): + child_names.append(link['child']['name']) gdb.write('%-30s %-15s %s\n' % ( genpd['name'].string(), status_string, - ', '.join(slave_names))) + ', '.join(child_names))) # Print devices in domain for pm_data in list_for_each_entry(genpd['dev_list'], @@ -70,7 +70,7 @@ Output is similar to /sys/kernel/debug/pm_genpd/pm_genpd_summary''' gdb.write(' %-50s %s\n' % (kobj_path, rtpm_status_str(dev))) def invoke(self, arg, from_tty): - gdb.write('domain status slaves\n'); + gdb.write('domain status children\n'); gdb.write(' /device runtime status\n'); gdb.write('----------------------------------------------------------------------\n'); for genpd in list_for_each_entry( From 30ac77e9952504fdf72dbf8b467df1bf0a75934a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 23 Mar 2023 16:16:57 -0700 Subject: [PATCH 134/755] scripts/gdb: bail early if there are no generic PD [ Upstream commit f19c3c2959e465209ade1a7a699e6cbf4359ce78 ] Avoid generating an exception if there are no generic power domain(s) registered: (gdb) lx-genpd-summary domain status children /device runtime status ---------------------------------------------------------------------- Python Exception : No symbol "gpd_list" in current context. Error occurred in Python: No symbol "gpd_list" in current context. (gdb) quit [f.fainelli@gmail.com: correctly invoke gdb_eval_or_none] Link: https://lkml.kernel.org/r/20230327185746.3856407-1-f.fainelli@gmail.com Link: https://lkml.kernel.org/r/20230323231659.3319941-1-f.fainelli@gmail.com Fixes: 8207d4a88e1e ("scripts/gdb: add lx-genpd-summary command") Signed-off-by: Florian Fainelli Cc: Jan Kiszka Cc: Kieran Bingham Cc: Leonard Crestez Cc: Stephen Boyd Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin --- scripts/gdb/linux/genpd.py | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/scripts/gdb/linux/genpd.py b/scripts/gdb/linux/genpd.py index 39cd1abd8559..b53649c0a77a 100644 --- a/scripts/gdb/linux/genpd.py +++ b/scripts/gdb/linux/genpd.py @@ -5,7 +5,7 @@ import gdb import sys -from linux.utils import CachedType +from linux.utils import CachedType, gdb_eval_or_none from linux.lists import list_for_each_entry generic_pm_domain_type = CachedType('struct generic_pm_domain') @@ -70,6 +70,8 @@ Output is similar to /sys/kernel/debug/pm_genpd/pm_genpd_summary''' gdb.write(' %-50s %s\n' % (kobj_path, rtpm_status_str(dev))) def invoke(self, arg, from_tty): + if gdb_eval_or_none("&gpd_list") is None: + raise gdb.GdbError("No power domain(s) registered") gdb.write('domain status children\n'); gdb.write(' /device runtime status\n'); gdb.write('----------------------------------------------------------------------\n'); From df9708297bb2e976fae9bc213b623ef42e08e54b Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Mon, 1 Jun 2020 12:34:37 +0530 Subject: [PATCH 135/755] mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry [ Upstream commit 834b4e8d344139ba64cda22099b2b2ef6c9a542d ] Drop configuration of Flash size, erase size and page size configuration. Flash size is needed only if using AHB decoder (BIT 23 of CONFIG_REG) which is not used by the driver. Erase size and page size are needed if IP is configured to send WREN automatically. But since SPI NOR layer takes care of sending WREN, there is no need to configure these fields either. Therefore drop these in preparation to move the driver to spi-mem framework where flash geometry is not visible to controller driver. Signed-off-by: Vignesh Raghavendra Reviewed-by: Tudor Ambarus Acked-by: Tudor Ambarus Link: https://lore.kernel.org/r/20200601070444.16923-2-vigneshr@ti.com Signed-off-by: Mark Brown Stable-dep-of: 2087e85bb66e ("spi: cadence-quadspi: fix suspend-resume implementations") Signed-off-by: Sasha Levin --- drivers/mtd/spi-nor/cadence-quadspi.c | 36 +-------------------------- 1 file changed, 1 insertion(+), 35 deletions(-) diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 97a5e1eaeefd..d680e4a272a1 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -77,9 +77,6 @@ struct cqspi_st { dma_addr_t mmap_phys_base; int current_cs; - int current_page_size; - int current_erase_size; - int current_addr_width; unsigned long master_ref_clk_hz; bool is_decoded_cs; u32 fifo_depth; @@ -736,32 +733,6 @@ static void cqspi_chipselect(struct spi_nor *nor) writel(reg, reg_base + CQSPI_REG_CONFIG); } -static void cqspi_configure_cs_and_sizes(struct spi_nor *nor) -{ - struct cqspi_flash_pdata *f_pdata = nor->priv; - struct cqspi_st *cqspi = f_pdata->cqspi; - void __iomem *iobase = cqspi->iobase; - unsigned int reg; - - /* configure page size and block size. */ - reg = readl(iobase + CQSPI_REG_SIZE); - reg &= ~(CQSPI_REG_SIZE_PAGE_MASK << CQSPI_REG_SIZE_PAGE_LSB); - reg &= ~(CQSPI_REG_SIZE_BLOCK_MASK << CQSPI_REG_SIZE_BLOCK_LSB); - reg &= ~CQSPI_REG_SIZE_ADDRESS_MASK; - reg |= (nor->page_size << CQSPI_REG_SIZE_PAGE_LSB); - reg |= (ilog2(nor->mtd.erasesize) << CQSPI_REG_SIZE_BLOCK_LSB); - reg |= (nor->addr_width - 1); - writel(reg, iobase + CQSPI_REG_SIZE); - - /* configure the chip select */ - cqspi_chipselect(nor); - - /* Store the new configuration of the controller */ - cqspi->current_page_size = nor->page_size; - cqspi->current_erase_size = nor->mtd.erasesize; - cqspi->current_addr_width = nor->addr_width; -} - static unsigned int calculate_ticks_for_ns(const unsigned int ref_clk_hz, const unsigned int ns_val) { @@ -867,18 +838,13 @@ static void cqspi_configure(struct spi_nor *nor) int switch_cs = (cqspi->current_cs != f_pdata->cs); int switch_ck = (cqspi->sclk != sclk); - if ((cqspi->current_page_size != nor->page_size) || - (cqspi->current_erase_size != nor->mtd.erasesize) || - (cqspi->current_addr_width != nor->addr_width)) - switch_cs = 1; - if (switch_cs || switch_ck) cqspi_controller_enable(cqspi, 0); /* Switch chip select. */ if (switch_cs) { cqspi->current_cs = f_pdata->cs; - cqspi_configure_cs_and_sizes(nor); + cqspi_chipselect(nor); } /* Setup baudrate divisor and delays */ From 7c69aeca59f2f143ef10d77f43bd3cc4e580d8e0 Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Mon, 1 Jun 2020 12:34:38 +0530 Subject: [PATCH 136/755] mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode [ Upstream commit a99705079a91e6373122bd0ca2fc129b688fc5b3 ] Currently direct access mode is used on platforms that have AHB window (memory mapped window) larger than flash size. This feature is limited to TI platforms as non TI platforms have < 1MB of AHB window. Therefore introduce a driver quirk to disable DAC mode and set it for non TI compatibles. This is in preparation to move to spi-mem framework where flash geometry cannot be known. Signed-off-by: Vignesh Raghavendra Reviewed-by: Tudor Ambarus Acked-by: Tudor Ambarus Link: https://lore.kernel.org/r/20200601070444.16923-3-vigneshr@ti.com Signed-off-by: Mark Brown Stable-dep-of: 2087e85bb66e ("spi: cadence-quadspi: fix suspend-resume implementations") Signed-off-by: Sasha Levin --- drivers/mtd/spi-nor/cadence-quadspi.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index d680e4a272a1..7e7736bbbfb3 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -34,6 +34,7 @@ /* Quirks */ #define CQSPI_NEEDS_WR_DELAY BIT(0) +#define CQSPI_DISABLE_DAC_MODE BIT(1) /* Capabilities mask */ #define CQSPI_BASE_HWCAPS_MASK \ @@ -1257,7 +1258,8 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) f_pdata->registered = true; - if (mtd->size <= cqspi->ahb_size) { + if (mtd->size <= cqspi->ahb_size && + !(ddata->quirks & CQSPI_DISABLE_DAC_MODE)) { f_pdata->use_direct_mode = true; dev_dbg(nor->dev, "using direct mode for %s\n", mtd->name); @@ -1455,6 +1457,7 @@ static const struct dev_pm_ops cqspi__dev_pm_ops = { static const struct cqspi_driver_platdata cdns_qspi = { .hwcaps_mask = CQSPI_BASE_HWCAPS_MASK, + .quirks = CQSPI_DISABLE_DAC_MODE, }; static const struct cqspi_driver_platdata k2g_qspi = { From ee5ffe4cdfea47821644dfeffd5dade897af1e01 Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Mon, 1 Jun 2020 12:34:39 +0530 Subject: [PATCH 137/755] mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure [ Upstream commit 48aae57f0f9f57797772bd462b4d64902b1b4ae1 ] If driver fails to acquire DMA channel then don't initialize rx_dma_complete struct as it won't be used. Signed-off-by: Vignesh Raghavendra Reviewed-by: Tudor Ambarus Acked-by: Tudor Ambarus Link: https://lore.kernel.org/r/20200601070444.16923-4-vigneshr@ti.com Signed-off-by: Mark Brown Stable-dep-of: 2087e85bb66e ("spi: cadence-quadspi: fix suspend-resume implementations") Signed-off-by: Sasha Levin --- drivers/mtd/spi-nor/cadence-quadspi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 7e7736bbbfb3..ad27d3e4c5db 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -1179,6 +1179,7 @@ static void cqspi_request_mmap_dma(struct cqspi_st *cqspi) if (IS_ERR(cqspi->rx_chan)) { dev_err(&cqspi->pdev->dev, "No Rx DMA available\n"); cqspi->rx_chan = NULL; + return; } init_completion(&cqspi->rx_dma_complete); } From caaefbf823ab7f5c0926fac62f0aa171ae5beeea Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Mon, 1 Jun 2020 12:34:41 +0530 Subject: [PATCH 138/755] mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel [ Upstream commit 935da5e5100f57d843cac4781b21f1c235059aa0 ] dma_request_chan_by_mask() can throw EPROBE_DEFER if DMA provider is not yet probed. Currently driver just falls back to using PIO mode (which is less efficient) in this case. Instead return probe deferral error as is so that driver will be re probed once DMA provider is available. Signed-off-by: Vignesh Raghavendra Reviewed-by: Tudor Ambarus Acked-by: Tudor Ambarus Link: https://lore.kernel.org/r/20200601070444.16923-6-vigneshr@ti.com Signed-off-by: Mark Brown Stable-dep-of: 2087e85bb66e ("spi: cadence-quadspi: fix suspend-resume implementations") Signed-off-by: Sasha Levin --- drivers/mtd/spi-nor/cadence-quadspi.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-) diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index ad27d3e4c5db..2c5a6587f505 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -1168,7 +1168,7 @@ static void cqspi_controller_init(struct cqspi_st *cqspi) cqspi_controller_enable(cqspi, 1); } -static void cqspi_request_mmap_dma(struct cqspi_st *cqspi) +static int cqspi_request_mmap_dma(struct cqspi_st *cqspi) { dma_cap_mask_t mask; @@ -1177,11 +1177,16 @@ static void cqspi_request_mmap_dma(struct cqspi_st *cqspi) cqspi->rx_chan = dma_request_chan_by_mask(&mask); if (IS_ERR(cqspi->rx_chan)) { - dev_err(&cqspi->pdev->dev, "No Rx DMA available\n"); + int ret = PTR_ERR(cqspi->rx_chan); + + if (ret != -EPROBE_DEFER) + dev_err(&cqspi->pdev->dev, "No Rx DMA available\n"); cqspi->rx_chan = NULL; - return; + return ret; } init_completion(&cqspi->rx_dma_complete); + + return 0; } static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) @@ -1265,8 +1270,11 @@ static int cqspi_setup_flash(struct cqspi_st *cqspi, struct device_node *np) dev_dbg(nor->dev, "using direct mode for %s\n", mtd->name); - if (!cqspi->rx_chan) - cqspi_request_mmap_dma(cqspi); + if (!cqspi->rx_chan) { + ret = cqspi_request_mmap_dma(cqspi); + if (ret == -EPROBE_DEFER) + goto err; + } } } From 6716203844bc8489af5e5564f0fa31e0c094a7ff Mon Sep 17 00:00:00 2001 From: Dhruva Gole Date: Mon, 17 Apr 2023 14:40:27 +0530 Subject: [PATCH 139/755] spi: cadence-quadspi: fix suspend-resume implementations [ Upstream commit 2087e85bb66ee3652dafe732bb9b9b896229eafc ] The cadence QSPI driver misbehaves after performing a full system suspend resume: ... spi-nor spi0.0: resume() failed ... This results in a flash connected via OSPI interface after system suspend- resume to be unusable. fix these suspend and resume functions. Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller") Signed-off-by: Dhruva Gole Link: https://lore.kernel.org/r/20230417091027.966146-3-d-gole@ti.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/mtd/spi-nor/cadence-quadspi.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/spi-nor/cadence-quadspi.c b/drivers/mtd/spi-nor/cadence-quadspi.c index 2c5a6587f505..7bdc558d8560 100644 --- a/drivers/mtd/spi-nor/cadence-quadspi.c +++ b/drivers/mtd/spi-nor/cadence-quadspi.c @@ -1441,17 +1441,30 @@ static int cqspi_remove(struct platform_device *pdev) static int cqspi_suspend(struct device *dev) { struct cqspi_st *cqspi = dev_get_drvdata(dev); + struct spi_master *master = dev_get_drvdata(dev); + int ret; + ret = spi_master_suspend(master); cqspi_controller_enable(cqspi, 0); - return 0; + + clk_disable_unprepare(cqspi->clk); + + return ret; } static int cqspi_resume(struct device *dev) { struct cqspi_st *cqspi = dev_get_drvdata(dev); + struct spi_master *master = dev_get_drvdata(dev); - cqspi_controller_enable(cqspi, 1); - return 0; + clk_prepare_enable(cqspi->clk); + cqspi_wait_idle(cqspi); + cqspi_controller_init(cqspi); + + cqspi->current_cs = -1; + cqspi->sclk = 0; + + return spi_master_resume(master); } static const struct dev_pm_ops cqspi__dev_pm_ops = { From e1431faa89bd41997fc1a1fb88e7290cf20f708c Mon Sep 17 00:00:00 2001 From: Kevin Brodsky Date: Tue, 11 Apr 2023 10:27:47 +0100 Subject: [PATCH 140/755] uapi/linux/const.h: prefer ISO-friendly __typeof__ [ Upstream commit 31088f6f7906253ef4577f6a9b84e2d42447dba0 ] typeof is (still) a GNU extension, which means that it cannot be used when building ISO C (e.g. -std=c99). It should therefore be avoided in uapi headers in favour of the ISO-friendly __typeof__. Unfortunately this issue could not be detected by CONFIG_UAPI_HEADER_TEST=y as the __ALIGN_KERNEL() macro is not expanded in any uapi header. This matters from a userspace perspective, not a kernel one. uapi headers and their contents are expected to be usable in a variety of situations, and in particular when building ISO C applications (with -std=c99 or similar). This particular problem can be reproduced by trying to use the __ALIGN_KERNEL macro directly in application code, say: #include int align(int x, int a) { return __KERNEL_ALIGN(x, a); } and trying to build that with -std=c99. Link: https://lkml.kernel.org/r/20230411092747.3759032-1-kevin.brodsky@arm.com Fixes: a79ff731a1b2 ("netfilter: xtables: make XT_ALIGN() usable in exported headers by exporting __ALIGN_KERNEL()") Signed-off-by: Kevin Brodsky Reported-by: Ruben Ayrapetyan Tested-by: Ruben Ayrapetyan Reviewed-by: Petr Vorel Tested-by: Petr Vorel Reviewed-by: Masahiro Yamada Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin --- include/uapi/linux/const.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/uapi/linux/const.h b/include/uapi/linux/const.h index af2a44c08683..a429381e7ca5 100644 --- a/include/uapi/linux/const.h +++ b/include/uapi/linux/const.h @@ -28,7 +28,7 @@ #define _BITUL(x) (_UL(1) << (x)) #define _BITULL(x) (_ULL(1) << (x)) -#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1) +#define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (__typeof__(x))(a) - 1) #define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) #define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) From f9e2abb6df6d1751ac3b9458da66c37fcf830b1d Mon Sep 17 00:00:00 2001 From: John Paul Adrian Glaubitz Date: Wed, 19 Apr 2023 13:48:52 +0200 Subject: [PATCH 141/755] sh: sq: Fix incorrect element size for allocating bitmap buffer [ Upstream commit 80f746e2bd0e1da3fdb49a53570e54a1a225faac ] The Store Queue code allocates a bitmap buffer with the size of multiple of sizeof(long) in sq_api_init(). While the buffer size is calculated correctly, the code uses the wrong element size to allocate the buffer which results in the allocated bitmap buffer being too small. Fix this by allocating the buffer with kcalloc() with element size sizeof(long) instead of kzalloc() whose elements size defaults to sizeof(char). Fixes: d7c30c682a27 ("sh: Store Queue API rework.") Reviewed-by: Geert Uytterhoeven Signed-off-by: John Paul Adrian Glaubitz Link: https://lore.kernel.org/r/20230419114854.528677-1-glaubitz@physik.fu-berlin.de Signed-off-by: Sasha Levin --- arch/sh/kernel/cpu/sh4/sq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/cpu/sh4/sq.c b/arch/sh/kernel/cpu/sh4/sq.c index 934ff84844fa..c633fe4d7039 100644 --- a/arch/sh/kernel/cpu/sh4/sq.c +++ b/arch/sh/kernel/cpu/sh4/sq.c @@ -380,7 +380,7 @@ static int __init sq_api_init(void) if (unlikely(!sq_cache)) return ret; - sq_bitmap = kzalloc(size, GFP_KERNEL); + sq_bitmap = kcalloc(size, sizeof(long), GFP_KERNEL); if (unlikely(!sq_bitmap)) goto out; From bd7a3e6416abe57ea763f6d6e5ea53e2b08109df Mon Sep 17 00:00:00 2001 From: Yinhao Hu Date: Wed, 12 Apr 2023 13:58:52 +0800 Subject: [PATCH 142/755] usb: chipidea: fix missing goto in `ci_hdrc_probe` [ Upstream commit d6f712f53b79f5017cdcefafb7a5aea9ec52da5d ] From the comment of ci_usb_phy_init, it returns an error code if usb_phy_init has failed, and it should do some clean up, not just return directly. Fix this by goto the error handling. Fixes: 74475ede784d ("usb: chipidea: move PHY operation to core") Reviewed-by: Dongliang Mu Acked-by: Peter Chen Signed-off-by: Yinhao Hu Link: https://lore.kernel.org/r/20230412055852.971991-1-dddddd@hust.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/chipidea/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 7a86979cf140..27298ca083d1 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -1084,7 +1084,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) ret = ci_usb_phy_init(ci); if (ret) { dev_err(dev, "unable to init phy: %d\n", ret); - return ret; + goto ulpi_exit; } ci->hw_bank.phys = res->start; From 26ca30516b2c49dd04c134cbdf122311c538df98 Mon Sep 17 00:00:00 2001 From: Chunfeng Yun Date: Mon, 17 Apr 2023 10:51:59 +0800 Subject: [PATCH 143/755] usb: mtu3: fix kernel panic at qmu transfer done irq handler [ Upstream commit d28f4091ea7ec3510fd6a3c6d433234e7a2bef14 ] When handle qmu transfer irq, it will unlock @mtu->lock before give back request, if another thread handle disconnect event at the same time, and try to disable ep, it may lock @mtu->lock and free qmu ring, then qmu irq hanlder may get a NULL gpd, avoid the KE by checking gpd's value before handling it. e.g. qmu done irq on cpu0 thread running on cpu1 qmu_done_tx() handle gpd [0] mtu3_requ_complete() mtu3_gadget_ep_disable() unlock @mtu->lock give back request lock @mtu->lock mtu3_ep_disable() mtu3_gpd_ring_free() unlock @mtu->lock lock @mtu->lock get next gpd [1] [1]: goto [0] to handle next gpd, and next gpd may be NULL. Fixes: 48e0d3735aa5 ("usb: mtu3: supports new QMU format") Signed-off-by: Chunfeng Yun Link: https://lore.kernel.org/r/20230417025203.18097-3-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/mtu3/mtu3_qmu.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c index 2ea3157ddb6e..e65586147965 100644 --- a/drivers/usb/mtu3/mtu3_qmu.c +++ b/drivers/usb/mtu3/mtu3_qmu.c @@ -210,6 +210,7 @@ static struct qmu_gpd *advance_enq_gpd(struct mtu3_gpd_ring *ring) return ring->enqueue; } +/* @dequeue may be NULL if ring is unallocated or freed */ static struct qmu_gpd *advance_deq_gpd(struct mtu3_gpd_ring *ring) { if (ring->dequeue < ring->end) @@ -484,7 +485,7 @@ static void qmu_done_tx(struct mtu3 *mtu, u8 epnum) dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n", __func__, epnum, gpd, gpd_current, ring->enqueue); - while (gpd != gpd_current && !GET_GPD_HWO(gpd)) { + while (gpd && gpd != gpd_current && !GET_GPD_HWO(gpd)) { mreq = next_request(mep); @@ -523,7 +524,7 @@ static void qmu_done_rx(struct mtu3 *mtu, u8 epnum) dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n", __func__, epnum, gpd, gpd_current, ring->enqueue); - while (gpd != gpd_current && !GET_GPD_HWO(gpd)) { + while (gpd && gpd != gpd_current && !GET_GPD_HWO(gpd)) { mreq = next_request(mep); From 8fa80b452bc9471f0c5f325f0c476931165b2af7 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 19 Apr 2023 17:27:03 +0300 Subject: [PATCH 144/755] firmware: stratix10-svc: Fix an NULL vs IS_ERR() bug in probe [ Upstream commit e1d6ca042e62c2a69513235f8629eb6e62ca79c5 ] The svc_create_memory_pool() function returns error pointers. It never returns NULL. Fix the check. Fixes: 7ca5ce896524 ("firmware: add Intel Stratix10 service layer driver") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/5f9a8cb4-5a4f-460b-9cdc-2fae6c5b7922@kili.mountain Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/firmware/stratix10-svc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c index 08c422380a00..7122bc6ea796 100644 --- a/drivers/firmware/stratix10-svc.c +++ b/drivers/firmware/stratix10-svc.c @@ -981,8 +981,8 @@ static int stratix10_svc_drv_probe(struct platform_device *pdev) return ret; genpool = svc_create_memory_pool(pdev, sh_memory); - if (!genpool) - return -ENOMEM; + if (IS_ERR(genpool)) + return PTR_ERR(genpool); /* allocate service controller and supporting channel */ controller = devm_kzalloc(dev, sizeof(*controller), GFP_KERNEL); From 488baa8038fa24f5a3e619c83c13026c89bc7a0a Mon Sep 17 00:00:00 2001 From: Shenwei Wang Date: Mon, 10 Apr 2023 14:55:55 -0500 Subject: [PATCH 145/755] tty: serial: fsl_lpuart: adjust buffer length to the intended size [ Upstream commit f73fd750552524b06b5d77ebfdd106ccc8fcac61 ] Based on the fls function definition provided below, we should not subtract 1 to obtain the correct buffer length: fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. Fixes: 5887ad43ee02 ("tty: serial: fsl_lpuart: Use cyclic DMA for Rx") Signed-off-by: Shenwei Wang Link: https://lore.kernel.org/r/20230410195555.1003900-1-shenwei.wang@nxp.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/fsl_lpuart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index b722ab941528..0b57973e7c65 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -1172,7 +1172,7 @@ static inline int lpuart_start_rx_dma(struct lpuart_port *sport) * 10ms at any baud rate. */ sport->rx_dma_rng_buf_len = (DMA_RX_TIMEOUT * baud / bits / 1000) * 2; - sport->rx_dma_rng_buf_len = (1 << (fls(sport->rx_dma_rng_buf_len) - 1)); + sport->rx_dma_rng_buf_len = (1 << fls(sport->rx_dma_rng_buf_len)); if (sport->rx_dma_rng_buf_len < 16) sport->rx_dma_rng_buf_len = 16; From 572d48361aa0a6e6f16c1470e5407de183493d0c Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Fri, 14 Apr 2023 10:02:39 -0700 Subject: [PATCH 146/755] serial: 8250: Add missing wakeup event reporting [ Upstream commit 0ba9e3a13c6adfa99e32b2576d20820ab10ad48a ] An 8250 UART configured as a wake-up source would not have reported itself through sysfs as being the source of wake-up, correct that. Fixes: b3b708fa2780 ("wake up from a serial port") Signed-off-by: Florian Fainelli Link: https://lore.kernel.org/r/20230414170241.2016255-1-f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/8250/8250_port.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 907130244e1f..3d369481d4db 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -1840,6 +1841,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) unsigned char status; unsigned long flags; struct uart_8250_port *up = up_to_u8250p(port); + struct tty_port *tport = &port->state->port; bool skip_rx = false; if (iir & UART_IIR_NO_INT) @@ -1863,6 +1865,8 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) skip_rx = true; if (status & (UART_LSR_DR | UART_LSR_BI) && !skip_rx) { + if (irqd_is_wakeup_set(irq_get_irq_data(port->irq))) + pm_wakeup_event(tport->tty->dev, 0); if (!up->dma || handle_rx_dma(up, iir)) status = serial8250_rx_chars(up, status); } From af9bfe1c0a50cd0fb4859e3deff5f47a25a42b18 Mon Sep 17 00:00:00 2001 From: Philipp Hortmann Date: Tue, 18 Apr 2023 22:02:01 +0200 Subject: [PATCH 147/755] staging: rtl8192e: Fix W_DISABLE# does not work after stop/start [ Upstream commit 3fac2397f562eb669ddc2f45867a253f3fc26184 ] When loading the driver for rtl8192e, the W_DISABLE# switch is working as intended. But when the WLAN is turned off in software and then turned on again the W_DISABLE# does not work anymore. Reason for this is that in the function _rtl92e_dm_check_rf_ctrl_gpio() the bfirst_after_down is checked and returned when true. bfirst_after_down is set true when switching the WLAN off in software. But it is not set to false again when WLAN is turned on again. Add bfirst_after_down = false in _rtl92e_sta_up to reset bit and fix above described bug. Fixes: 94a799425eee ("From: wlanfae [PATCH 1/8] rtl8192e: Import new version of driver from realtek") Signed-off-by: Philipp Hortmann Link: https://lore.kernel.org/r/20230418200201.GA17398@matrix-ESPRIMO-P710 Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c index bcbf0c8cd420..be377e75703b 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c @@ -767,6 +767,7 @@ static int _rtl92e_sta_up(struct net_device *dev, bool is_silent_reset) else netif_wake_queue(dev); + priv->bfirst_after_down = false; return 0; } From 54dda732225555dc6d660e95793c54a0a44b612c Mon Sep 17 00:00:00 2001 From: Jishnu Prakash Date: Thu, 13 Apr 2023 15:38:34 -0700 Subject: [PATCH 148/755] spmi: Add a check for remove callback when removing a SPMI driver [ Upstream commit b56eef3e16d888883fefab47425036de80dd38fc ] When removing a SPMI driver, there can be a crash due to NULL pointer dereference if it does not have a remove callback defined. This is one such call trace observed when removing the QCOM SPMI PMIC driver: dump_backtrace.cfi_jt+0x0/0x8 dump_stack_lvl+0xd8/0x16c panic+0x188/0x498 __cfi_slowpath+0x0/0x214 __cfi_slowpath+0x1dc/0x214 spmi_drv_remove+0x16c/0x1e0 device_release_driver_internal+0x468/0x79c driver_detach+0x11c/0x1a0 bus_remove_driver+0xc4/0x124 driver_unregister+0x58/0x84 cleanup_module+0x1c/0xc24 [qcom_spmi_pmic] __do_sys_delete_module+0x3ec/0x53c __arm64_sys_delete_module+0x18/0x28 el0_svc_common+0xdc/0x294 el0_svc+0x38/0x9c el0_sync_handler+0x8c/0xf0 el0_sync+0x1b4/0x1c0 If a driver has all its resources allocated through devm_() APIs and does not need any other explicit cleanup, it would not require a remove callback to be defined. Hence, add a check for remove callback presence before calling it when removing a SPMI driver. Link: https://lore.kernel.org/r/1671601032-18397-2-git-send-email-quic_jprakash@quicinc.com Fixes: 6f00f8c8635f ("mfd: qcom-spmi-pmic: Use devm_of_platform_populate()") Fixes: 5a86bf343976 ("spmi: Linux driver framework for SPMI") Signed-off-by: Jishnu Prakash Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20230413223834.4084793-7-sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/spmi/spmi.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spmi/spmi.c b/drivers/spmi/spmi.c index c16b60f645a4..8ca7e004a53d 100644 --- a/drivers/spmi/spmi.c +++ b/drivers/spmi/spmi.c @@ -348,7 +348,8 @@ static int spmi_drv_remove(struct device *dev) const struct spmi_driver *sdrv = to_spmi_driver(dev->driver); pm_runtime_get_sync(dev); - sdrv->remove(to_spmi_device(dev)); + if (sdrv->remove) + sdrv->remove(to_spmi_device(dev)); pm_runtime_put_noidle(dev); pm_runtime_disable(dev); From 97cd970f8addee7d99b4614510993e322e47f777 Mon Sep 17 00:00:00 2001 From: Liang He Date: Thu, 30 Mar 2023 11:35:58 +0800 Subject: [PATCH 149/755] macintosh/windfarm_smu_sat: Add missing of_node_put() [ Upstream commit 631cf002826007ab7415258ee647dcaf8845ad5a ] We call of_node_get() in wf_sat_probe() after sat is created, so we need the of_node_put() before *kfree(sat)*. Fixes: ac171c46667c ("[PATCH] powerpc: Thermal control for dual core G5s") Signed-off-by: Liang He Signed-off-by: Michael Ellerman Link: https://msgid.link/20230330033558.2562778-1-windhl@126.com Signed-off-by: Sasha Levin --- drivers/macintosh/windfarm_smu_sat.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/macintosh/windfarm_smu_sat.c b/drivers/macintosh/windfarm_smu_sat.c index cb75dc035616..30d53a535d55 100644 --- a/drivers/macintosh/windfarm_smu_sat.c +++ b/drivers/macintosh/windfarm_smu_sat.c @@ -171,6 +171,7 @@ static void wf_sat_release(struct kref *ref) if (sat->nr >= 0) sats[sat->nr] = NULL; + of_node_put(sat->node); kfree(sat); } From f60c8d7c16bb7590945d102eb94f2d0b4c89c381 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 22 Feb 2023 23:01:13 -0800 Subject: [PATCH 150/755] powerpc/mpc512x: fix resource printk format warning [ Upstream commit 7538c97e2b80ff6b7a8ea2ecf16a04355461b439 ] Use "%pa" format specifier for resource_size_t to avoid a compiler printk format warning. ../arch/powerpc/platforms/512x/clock-commonclk.c: In function 'mpc5121_clk_provide_backwards_compat': ../arch/powerpc/platforms/512x/clock-commonclk.c:989:44: error: format '%x' expects argument of type 'unsigned int', but argument 4 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] 989 | snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \ | ^~~~~~~~~ ~~~~~~~~~ | | | resource_size_t {aka long long unsigned int} Prevents 24 such warnings. Fixes: 01f25c371658 ("clk: mpc512x: add backwards compat to the CCF code") Signed-off-by: Randy Dunlap Signed-off-by: Michael Ellerman Link: https://msgid.link/20230223070116.660-2-rdunlap@infradead.org Signed-off-by: Sasha Levin --- arch/powerpc/platforms/512x/clock-commonclk.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/platforms/512x/clock-commonclk.c b/arch/powerpc/platforms/512x/clock-commonclk.c index 30342b60aa63..42c3d40355d9 100644 --- a/arch/powerpc/platforms/512x/clock-commonclk.c +++ b/arch/powerpc/platforms/512x/clock-commonclk.c @@ -984,7 +984,7 @@ static void mpc5121_clk_provide_migration_support(void) #define NODE_PREP do { \ of_address_to_resource(np, 0, &res); \ - snprintf(devname, sizeof(devname), "%08x.%s", res.start, np->name); \ + snprintf(devname, sizeof(devname), "%pa.%s", &res.start, np->name); \ } while (0) #define NODE_CHK(clkname, clkitem, regnode, regflag) do { \ From 770d583cd5aecb448112db4099821655326cae5f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 22 Feb 2023 23:01:14 -0800 Subject: [PATCH 151/755] powerpc/wii: fix resource printk format warnings [ Upstream commit 7b69600d4da0049244e9be2f5ef5a2f8e04fcd9a ] Use "%pa" format specifier for resource_size_t to avoid compiler printk format warnings. ../arch/powerpc/platforms/embedded6xx/flipper-pic.c: In function 'flipper_pic_init': ../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] ../arch/powerpc/platforms/embedded6xx/flipper-pic.c:148:9: note: in expansion of macro 'pr_info' 148 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); | ^~~~~~~ ../arch/powerpc/platforms/embedded6xx/hlwd-pic.c: In function 'hlwd_pic_init': ../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] ../arch/powerpc/platforms/embedded6xx/hlwd-pic.c:174:9: note: in expansion of macro 'pr_info' 174 | pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); | ^~~~~~~ ../arch/powerpc/platforms/embedded6xx/wii.c: In function 'wii_ioremap_hw_regs': ../include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'resource_size_t' {aka 'long long unsigned int'} [-Werror=format=] ../arch/powerpc/platforms/embedded6xx/wii.c:77:17: note: in expansion of macro 'pr_info' 77 | pr_info("%s at 0x%08x mapped to 0x%p\n", name, | ^~~~~~~ Fixes: 028ee972f032 ("powerpc: gamecube/wii: flipper interrupt controller support") Fixes: 9c21025c7845 ("powerpc: wii: hollywood interrupt controller support") Fixes: 5a7ee3198dfa ("powerpc: wii: platform support") Signed-off-by: Randy Dunlap Signed-off-by: Michael Ellerman Link: https://msgid.link/20230223070116.660-3-rdunlap@infradead.org Signed-off-by: Sasha Levin --- arch/powerpc/platforms/embedded6xx/flipper-pic.c | 2 +- arch/powerpc/platforms/embedded6xx/hlwd-pic.c | 2 +- arch/powerpc/platforms/embedded6xx/wii.c | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/embedded6xx/flipper-pic.c b/arch/powerpc/platforms/embedded6xx/flipper-pic.c index d39a9213a3e6..7dd2e2f97aae 100644 --- a/arch/powerpc/platforms/embedded6xx/flipper-pic.c +++ b/arch/powerpc/platforms/embedded6xx/flipper-pic.c @@ -144,7 +144,7 @@ static struct irq_domain * __init flipper_pic_init(struct device_node *np) } io_base = ioremap(res.start, resource_size(&res)); - pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); + pr_info("controller at 0x%pa mapped to 0x%p\n", &res.start, io_base); __flipper_quiesce(io_base); diff --git a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c index de10c13de15c..c6b492ebb766 100644 --- a/arch/powerpc/platforms/embedded6xx/hlwd-pic.c +++ b/arch/powerpc/platforms/embedded6xx/hlwd-pic.c @@ -173,7 +173,7 @@ static struct irq_domain *hlwd_pic_init(struct device_node *np) return NULL; } - pr_info("controller at 0x%08x mapped to 0x%p\n", res.start, io_base); + pr_info("controller at 0x%pa mapped to 0x%p\n", &res.start, io_base); __hlwd_quiesce(io_base); diff --git a/arch/powerpc/platforms/embedded6xx/wii.c b/arch/powerpc/platforms/embedded6xx/wii.c index 67e48b0a164e..c691453dfd3f 100644 --- a/arch/powerpc/platforms/embedded6xx/wii.c +++ b/arch/powerpc/platforms/embedded6xx/wii.c @@ -89,8 +89,8 @@ static void __iomem *wii_ioremap_hw_regs(char *name, char *compatible) hw_regs = ioremap(res.start, resource_size(&res)); if (hw_regs) { - pr_info("%s at 0x%08x mapped to 0x%p\n", name, - res.start, hw_regs); + pr_info("%s at 0x%pa mapped to 0x%p\n", name, + &res.start, hw_regs); } out_put: From e2dd8bbab7b5b7a377962091a87f12c1955820da Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 22 Feb 2023 23:01:16 -0800 Subject: [PATCH 152/755] powerpc/sysdev/tsi108: fix resource printk format warnings [ Upstream commit 55d8bd02cc1b9f1063993b5c42c9cabf4af67dea ] Use "%pa" format specifier for resource_size_t to avoid a compiler printk format warning. arch/powerpc/sysdev/tsi108_pci.c: In function 'tsi108_setup_pci': include/linux/kern_levels.h:5:25: error: format '%x' expects argument of type 'unsigned int', but argument 2 has type 'resource_size_t' Fixes: c4342ff92bed ("[POWERPC] Update mpc7448hpc2 board irq support using device tree") Fixes: 2b9d7467a6db ("[POWERPC] Add tsi108 pci and platform device data register function") Signed-off-by: Randy Dunlap [mpe: Use pr_info() and unsplit string] Signed-off-by: Michael Ellerman Link: https://msgid.link/20230223070116.660-5-rdunlap@infradead.org Signed-off-by: Sasha Levin --- arch/powerpc/sysdev/tsi108_pci.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/sysdev/tsi108_pci.c b/arch/powerpc/sysdev/tsi108_pci.c index 49f9541954f8..3664ffcbb313 100644 --- a/arch/powerpc/sysdev/tsi108_pci.c +++ b/arch/powerpc/sysdev/tsi108_pci.c @@ -216,9 +216,8 @@ int __init tsi108_setup_pci(struct device_node *dev, u32 cfg_phys, int primary) (hose)->ops = &tsi108_direct_pci_ops; - printk(KERN_INFO "Found tsi108 PCI host bridge at 0x%08x. " - "Firmware bus number: %d->%d\n", - rsrc.start, hose->first_busno, hose->last_busno); + pr_info("Found tsi108 PCI host bridge at 0x%pa. Firmware bus number: %d->%d\n", + &rsrc.start, hose->first_busno, hose->last_busno); /* Interpret the "ranges" property */ /* This also maps the I/O region and sets isa_io/mem_base */ From 333a2a9846b98c3c949763639cd13cb4913cd66f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 22 Feb 2023 17:42:41 -0800 Subject: [PATCH 153/755] macintosh: via-pmu-led: requires ATA to be set [ Upstream commit 05dce4ba125336875cd3eed3c1503fa81cd2f691 ] LEDS_TRIGGER_DISK depends on ATA, so selecting LEDS_TRIGGER_DISK when ATA is not set/enabled causes a Kconfig warning: WARNING: unmet direct dependencies detected for LEDS_TRIGGER_DISK Depends on [n]: NEW_LEDS [=y] && LEDS_TRIGGERS [=y] && ATA [=n] Selected by [y]: - ADB_PMU_LED_DISK [=y] && MACINTOSH_DRIVERS [=y] && ADB_PMU_LED [=y] && LEDS_CLASS [=y] Fix this by making ADB_PMU_LED_DISK depend on ATA. Seen on both PPC32 and PPC64. Fixes: 0e865a80c135 ("macintosh: Remove dependency on IDE_GD_ATA if ADB_PMU_LED_DISK is selected") Signed-off-by: Randy Dunlap Signed-off-by: Michael Ellerman Link: https://msgid.link/20230223014241.20878-1-rdunlap@infradead.org Signed-off-by: Sasha Levin --- drivers/macintosh/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/macintosh/Kconfig b/drivers/macintosh/Kconfig index b5a534206edd..1605dcaa89e3 100644 --- a/drivers/macintosh/Kconfig +++ b/drivers/macintosh/Kconfig @@ -86,6 +86,7 @@ config ADB_PMU_LED config ADB_PMU_LED_DISK bool "Use front LED as DISK LED by default" + depends on ATA depends on ADB_PMU_LED depends on LEDS_CLASS select LEDS_TRIGGERS From ff3edfb3c825dc642dc89cf4d88d687b534a11b2 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Mon, 6 Mar 2023 15:33:41 -0600 Subject: [PATCH 154/755] powerpc/rtas: use memmove for potentially overlapping buffer copy [ Upstream commit 271208ee5e335cb1ad280d22784940daf7ddf820 ] Using memcpy() isn't safe when buf is identical to rtas_err_buf, which can happen during boot before slab is up. Full context which may not be obvious from the diff: if (altbuf) { buf = altbuf; } else { buf = rtas_err_buf; if (slab_is_available()) buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC); } if (buf) memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX); This was found by inspection and I'm not aware of it causing problems in practice. It appears to have been introduced by commit 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel"); the old ppc64 version of this code did not have this problem. Use memmove() instead. Fixes: 033ef338b6e0 ("powerpc: Merge rtas.c into arch/powerpc/kernel") Signed-off-by: Nathan Lynch Reviewed-by: Andrew Donnellan Signed-off-by: Michael Ellerman Link: https://msgid.link/20230220-rtas-queue-for-6-4-v1-2-010e4416f13f@linux.ibm.com Signed-off-by: Sasha Levin --- arch/powerpc/kernel/rtas.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c index ee810df7d522..0793579f2bb9 100644 --- a/arch/powerpc/kernel/rtas.c +++ b/arch/powerpc/kernel/rtas.c @@ -398,7 +398,7 @@ static char *__fetch_rtas_last_error(char *altbuf) buf = kmalloc(RTAS_ERROR_LOG_MAX, GFP_ATOMIC); } if (buf) - memcpy(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX); + memmove(buf, rtas_err_buf, RTAS_ERROR_LOG_MAX); } return buf; From 318bc22decd4051ce6d64c5c1ff906d61ff0ff54 Mon Sep 17 00:00:00 2001 From: Yang Jihong Date: Mon, 27 Feb 2023 10:35:08 +0800 Subject: [PATCH 155/755] perf/core: Fix hardlockup failure caused by perf throttle [ Upstream commit 15def34e2635ab7e0e96f1bc32e1b69609f14942 ] commit e050e3f0a71bf ("perf: Fix broken interrupt rate throttling") introduces a change in throttling threshold judgment. Before this, compare hwc->interrupts and max_samples_per_tick, then increase hwc->interrupts by 1, but this commit reverses order of these two behaviors, causing the semantics of max_samples_per_tick to change. In literal sense of "max_samples_per_tick", if hwc->interrupts == max_samples_per_tick, it should not be throttled, therefore, the judgment condition should be changed to "hwc->interrupts > max_samples_per_tick". In fact, this may cause the hardlockup to fail, The minimum value of max_samples_per_tick may be 1, in this case, the return value of __perf_event_account_interrupt function is 1. As a result, nmi_watchdog gets throttled, which would stop PMU (Use x86 architecture as an example, see x86_pmu_handle_irq). Fixes: e050e3f0a71b ("perf: Fix broken interrupt rate throttling") Signed-off-by: Yang Jihong Signed-off-by: Peter Zijlstra (Intel) Link: https://lkml.kernel.org/r/20230227023508.102230-1-yangjihong1@huawei.com Signed-off-by: Sasha Levin --- kernel/events/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index 1ef924d6a385..41a8a5f74940 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -8166,8 +8166,8 @@ __perf_event_account_interrupt(struct perf_event *event, int throttle) hwc->interrupts = 1; } else { hwc->interrupts++; - if (unlikely(throttle - && hwc->interrupts >= max_samples_per_tick)) { + if (unlikely(throttle && + hwc->interrupts > max_samples_per_tick)) { __this_cpu_inc(perf_throttled_count); tick_dep_set_cpu(smp_processor_id(), TICK_DEP_BIT_PERF_EVENTS); hwc->interrupts = MAX_INTERRUPTS; From b24e0e4612a50ddfa73833c5012144ff5bf7f7dd Mon Sep 17 00:00:00 2001 From: Daniil Dulov Date: Mon, 27 Feb 2023 01:17:51 -0800 Subject: [PATCH 156/755] RDMA/siw: Fix potential page_array out of range access [ Upstream commit 271bfcfb83a9f77cbae3d6e1a16e3c14132922f0 ] When seg is equal to MAX_ARRAY, the loop should break, otherwise it will result in out of range access. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b9be6f18cf9e ("rdma/siw: transmit path") Signed-off-by: Daniil Dulov Link: https://lore.kernel.org/r/20230227091751.589612-1-d.dulov@aladdin.ru Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin --- drivers/infiniband/sw/siw/siw_qp_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/sw/siw/siw_qp_tx.c b/drivers/infiniband/sw/siw/siw_qp_tx.c index 2b5120a13e37..42d03bd1622d 100644 --- a/drivers/infiniband/sw/siw/siw_qp_tx.c +++ b/drivers/infiniband/sw/siw/siw_qp_tx.c @@ -548,7 +548,7 @@ static int siw_tx_hdt(struct siw_iwarp_tx *c_tx, struct socket *s) data_len -= plen; fp_off = 0; - if (++seg > (int)MAX_ARRAY) { + if (++seg >= (int)MAX_ARRAY) { siw_dbg_qp(tx_qp(c_tx), "to many fragments\n"); siw_unmap_pages(page_array, kmap_mask); wqe->processed -= c_tx->bytes_unsent; From a48403e8c3257d88929493cb3ec4f5872cb856b7 Mon Sep 17 00:00:00 2001 From: Natalia Petrova Date: Fri, 3 Mar 2023 15:44:08 +0300 Subject: [PATCH 157/755] RDMA/rdmavt: Delete unnecessary NULL check [ Upstream commit b73a0b80c69de77d8d4942abb37066531c0169b2 ] There is no need to check 'rdi->qp_dev' for NULL. The field 'qp_dev' is created in rvt_register_device() which will fail if the 'qp_dev' allocation fails in rvt_driver_qp_init(). Overwise this pointer doesn't changed and passed to rvt_qp_exit() by the next step. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 0acb0cc7ecc1 ("IB/rdmavt: Initialize and teardown of qpn table") Signed-off-by: Natalia Petrova Link: https://lore.kernel.org/r/20230303124408.16685-1-n.petrova@fintech.ru Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin --- drivers/infiniband/sw/rdmavt/qp.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/infiniband/sw/rdmavt/qp.c b/drivers/infiniband/sw/rdmavt/qp.c index e97c13967174..905e2eaed095 100644 --- a/drivers/infiniband/sw/rdmavt/qp.c +++ b/drivers/infiniband/sw/rdmavt/qp.c @@ -505,8 +505,6 @@ void rvt_qp_exit(struct rvt_dev_info *rdi) if (qps_inuse) rvt_pr_err(rdi, "QP memory leak! %u still in use\n", qps_inuse); - if (!rdi->qp_dev) - return; kfree(rdi->qp_dev->qp_table); free_qpn_table(&rdi->qp_dev->qpn_table); From 683cd87041acb74f33286871b7422904d0bf2579 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 11 Mar 2023 10:40:21 +0100 Subject: [PATCH 158/755] rtc: omap: include header for omap_rtc_power_off_program prototype MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit f69c2b5420497b7a54181ce170d682cbeb1f119f ] Non-static functions should have a prototype: drivers/rtc/rtc-omap.c:410:5: error: no previous prototype for ‘omap_rtc_power_off_program’ [-Werror=missing-prototypes] Fixes: 6256f7f7f217 ("rtc: OMAP: Add support for rtc-only mode") Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230311094021.79730-1-krzysztof.kozlowski@linaro.org Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin --- drivers/rtc/rtc-omap.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/rtc/rtc-omap.c b/drivers/rtc/rtc-omap.c index a2941c875a06..bf502fcd6077 100644 --- a/drivers/rtc/rtc-omap.c +++ b/drivers/rtc/rtc-omap.c @@ -26,6 +26,7 @@ #include #include #include +#include /* * The OMAP RTC is a year/month/day/hours/minutes/seconds BCD clock From 8feca625900777e02a449e53fe4121339934c38a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 7 Mar 2023 12:51:27 +0300 Subject: [PATCH 159/755] RDMA/mlx4: Prevent shift wrapping in set_user_sq_size() [ Upstream commit d50b3c73f1ac20dabc53dc6e9d64ce9c79a331eb ] The ucmd->log_sq_bb_count variable is controlled by the user so this shift can wrap. Fix it by using check_shl_overflow() in the same way that it was done in commit 515f60004ed9 ("RDMA/hns: Prevent undefined behavior in hns_roce_set_user_sq_size()"). Fixes: 839041329fd3 ("IB/mlx4: Sanity check userspace send queue sizes") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/a8dfbd1d-c019-4556-930b-bab1ded73b10@kili.mountain Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin --- drivers/infiniband/hw/mlx4/qp.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index bca5358f3ef2..4523eb85ec69 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -438,9 +438,13 @@ static int set_user_sq_size(struct mlx4_ib_dev *dev, struct mlx4_ib_qp *qp, struct mlx4_ib_create_qp *ucmd) { + u32 cnt; + /* Sanity check SQ size before proceeding */ - if ((1 << ucmd->log_sq_bb_count) > dev->dev->caps.max_wqes || - ucmd->log_sq_stride > + if (check_shl_overflow(1, ucmd->log_sq_bb_count, &cnt) || + cnt > dev->dev->caps.max_wqes) + return -EINVAL; + if (ucmd->log_sq_stride > ilog2(roundup_pow_of_two(dev->dev->caps.max_sq_desc_sz)) || ucmd->log_sq_stride < MLX4_IB_MIN_SQ_STRIDE) return -EINVAL; From 31ca78dc1f501d6513a5066da9ab346af646c44c Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Mon, 20 Mar 2023 22:21:42 +0100 Subject: [PATCH 160/755] rtc: meson-vrtc: Use ktime_get_real_ts64() to get the current time [ Upstream commit 0e6255fa3f649170da6bd1a544680589cfae1131 ] The VRTC alarm register can be programmed with an amount of seconds after which the SoC will be woken up by the VRTC timer again. We are already converting the alarm time from meson_vrtc_set_alarm() to "seconds since 1970". This means we also need to use "seconds since 1970" for the current time. This fixes a problem where setting the alarm to one minute in the future results in the firmware (which handles wakeup) to output (on the serial console) that the system will be woken up in billions of seconds. ktime_get_raw_ts64() returns the time since boot, not since 1970. Switch to ktime_get_real_ts64() to fix the calculation of the alarm time and to make the SoC wake up at the specified date/time. Also the firmware (which manages suspend) now prints either 59 or 60 seconds until wakeup (depending on how long it takes for the system to enter suspend). Fixes: 6ef35398e827 ("rtc: Add Amlogic Virtual Wake RTC") Signed-off-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Reviewed-by: Kevin Hilman Link: https://lore.kernel.org/r/20230320212142.2355062-1-martin.blumenstingl@googlemail.com Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin --- drivers/rtc/rtc-meson-vrtc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/rtc/rtc-meson-vrtc.c b/drivers/rtc/rtc-meson-vrtc.c index 89e5ba0dae69..1cf98542578f 100644 --- a/drivers/rtc/rtc-meson-vrtc.c +++ b/drivers/rtc/rtc-meson-vrtc.c @@ -23,7 +23,7 @@ static int meson_vrtc_read_time(struct device *dev, struct rtc_time *tm) struct timespec64 time; dev_dbg(dev, "%s\n", __func__); - ktime_get_raw_ts64(&time); + ktime_get_real_ts64(&time); rtc_time64_to_tm(time.tv_sec, tm); return 0; @@ -101,7 +101,7 @@ static int __maybe_unused meson_vrtc_suspend(struct device *dev) long alarm_secs; struct timespec64 time; - ktime_get_raw_ts64(&time); + ktime_get_real_ts64(&time); local_time = time.tv_sec; dev_dbg(dev, "alarm_time = %lus, local_time=%lus\n", From 0c770f95a2d79eb255517881a14726201119503e Mon Sep 17 00:00:00 2001 From: Sebastian Reichel Date: Fri, 17 Mar 2023 23:56:57 +0100 Subject: [PATCH 161/755] power: supply: generic-adc-battery: fix unit scaling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 44263f50065969f2344808388bd589740f026167 ] power-supply properties are reported in µV, µA and µW. The IIO API provides mV, mA, mW, so the values need to be multiplied by 1000. Fixes: e60fea794e6e ("power: battery: Generic battery driver using IIO") Reviewed-by: Linus Walleij Reviewed-by: Matti Vaittinen Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin --- drivers/power/supply/generic-adc-battery.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/power/supply/generic-adc-battery.c b/drivers/power/supply/generic-adc-battery.c index 97b0e873e87d..c2d6378bb897 100644 --- a/drivers/power/supply/generic-adc-battery.c +++ b/drivers/power/supply/generic-adc-battery.c @@ -138,6 +138,9 @@ static int read_channel(struct gab *adc_bat, enum power_supply_property psp, result); if (ret < 0) pr_err("read channel error\n"); + else + *result *= 1000; + return ret; } From 795d11e8ff355eda29af150d1eb47375bd02f63e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Cl=C3=A9ment=20L=C3=A9ger?= Date: Tue, 31 Jan 2023 09:32:27 +0100 Subject: [PATCH 162/755] clk: add missing of_node_put() in "assigned-clocks" property parsing MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 27a6e1b09a782517fddac91259970ac466a3f7b6 ] When returning from of_parse_phandle_with_args(), the np member of the of_phandle_args structure should be put after usage. Add missing of_node_put() calls in both __set_clk_parents() and __set_clk_rates(). Fixes: 86be408bfbd8 ("clk: Support for clock parents and rates assigned from device tree") Signed-off-by: Clément Léger Link: https://lore.kernel.org/r/20230131083227.10990-1-clement.leger@bootlin.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin --- drivers/clk/clk-conf.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/clk/clk-conf.c b/drivers/clk/clk-conf.c index 2ef819606c41..1a4e6340f95c 100644 --- a/drivers/clk/clk-conf.c +++ b/drivers/clk/clk-conf.c @@ -33,9 +33,12 @@ static int __set_clk_parents(struct device_node *node, bool clk_supplier) else return rc; } - if (clkspec.np == node && !clk_supplier) + if (clkspec.np == node && !clk_supplier) { + of_node_put(clkspec.np); return 0; + } pclk = of_clk_get_from_provider(&clkspec); + of_node_put(clkspec.np); if (IS_ERR(pclk)) { if (PTR_ERR(pclk) != -EPROBE_DEFER) pr_warn("clk: couldn't get parent clock %d for %pOF\n", @@ -48,10 +51,12 @@ static int __set_clk_parents(struct device_node *node, bool clk_supplier) if (rc < 0) goto err; if (clkspec.np == node && !clk_supplier) { + of_node_put(clkspec.np); rc = 0; goto err; } clk = of_clk_get_from_provider(&clkspec); + of_node_put(clkspec.np); if (IS_ERR(clk)) { if (PTR_ERR(clk) != -EPROBE_DEFER) pr_warn("clk: couldn't get assigned clock %d for %pOF\n", @@ -93,10 +98,13 @@ static int __set_clk_rates(struct device_node *node, bool clk_supplier) else return rc; } - if (clkspec.np == node && !clk_supplier) + if (clkspec.np == node && !clk_supplier) { + of_node_put(clkspec.np); return 0; + } clk = of_clk_get_from_provider(&clkspec); + of_node_put(clkspec.np); if (IS_ERR(clk)) { if (PTR_ERR(clk) != -EPROBE_DEFER) pr_warn("clk: couldn't get clock %d for %pOF\n", From b4f12e2402a5a4faf4088393295a17da5ee0190e Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Sun, 2 Apr 2023 14:10:13 +0900 Subject: [PATCH 163/755] RDMA/siw: Remove namespace check from siw_netdev_event() [ Upstream commit 266e9b3475ba82212062771fdbc40be0e3c06ec8 ] syzbot is reporting that siw_netdev_event(NETDEV_UNREGISTER) cannot destroy siw_device created after unshare(CLONE_NEWNET) due to net namespace check. It seems that this check was by error there and should be removed. Reported-by: syzbot Link: https://syzkaller.appspot.com/bug?extid=5e70d01ee8985ae62a3b Suggested-by: Jason Gunthorpe Suggested-by: Leon Romanovsky Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface") Signed-off-by: Tetsuo Handa Link: https://lore.kernel.org/r/a44e9ac5-44e2-d575-9e30-02483cc7ffd1@I-love.SAKURA.ne.jp Reviewed-by: Bernard Metzler Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin --- drivers/infiniband/sw/siw/siw_main.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/infiniband/sw/siw/siw_main.c b/drivers/infiniband/sw/siw/siw_main.c index dbbf8c6c16d3..a462c2fc6f31 100644 --- a/drivers/infiniband/sw/siw/siw_main.c +++ b/drivers/infiniband/sw/siw/siw_main.c @@ -472,9 +472,6 @@ static int siw_netdev_event(struct notifier_block *nb, unsigned long event, dev_dbg(&netdev->dev, "siw: event %lu\n", event); - if (dev_net(netdev) != &init_net) - return NOTIFY_OK; - base_dev = ib_device_get_by_netdev(netdev, RDMA_DRIVER_SIW); if (!base_dev) return NOTIFY_OK; From fe60c3af70bf812d028b54f397124245e32cf396 Mon Sep 17 00:00:00 2001 From: Patrick Kelsey Date: Fri, 7 Apr 2023 12:52:39 -0400 Subject: [PATCH 164/755] IB/hfi1: Fix SDMA mmu_rb_node not being evicted in LRU order [ Upstream commit 9fe8fec5e43d5a80f43cbf61aaada1b047a1eb61 ] hfi1_mmu_rb_remove_unless_exact() did not move mmu_rb_node objects in mmu_rb_handler->lru_list after getting a cache hit on an mmu_rb_node. As a result, hfi1_mmu_rb_evict() was not guaranteed to evict truly least-recently used nodes. This could be a performance issue for an application when that application: - Uses some long-lived buffers frequently. - Uses a large number of buffers once. - Hits the mmu_rb_handler cache size or pinned-page limits, forcing mmu_rb_handler cache entries to be evicted. In this case, the one-time use buffers cause the long-lived buffer entries to eventually filter to the end of the LRU list where hfi1_mmu_rb_evict() will consider evicting a frequently-used long-lived entry instead of evicting one of the one-time use entries. Fix this by inserting new mmu_rb_node at the tail of mmu_rb_handler->lru_list and move mmu_rb_ndoe to the tail of mmu_rb_handler->lru_list when the mmu_rb_node is a hit in hfi1_mmu_rb_remove_unless_exact(). Change hfi1_mmu_rb_evict() to evict from the head of mmu_rb_handler->lru_list instead of the tail. Fixes: 0636e9ab8355 ("IB/hfi1: Add cache evict LRU list") Signed-off-by: Brendan Cunningham Signed-off-by: Patrick Kelsey Signed-off-by: Dennis Dalessandro Link: https://lore.kernel.org/r/168088635931.3027109.10423156330761536044.stgit@252.162.96.66.static.eigbox.net Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin --- drivers/infiniband/hw/hfi1/mmu_rb.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-) diff --git a/drivers/infiniband/hw/hfi1/mmu_rb.c b/drivers/infiniband/hw/hfi1/mmu_rb.c index 14d2a90964c3..a5631286c8e0 100644 --- a/drivers/infiniband/hw/hfi1/mmu_rb.c +++ b/drivers/infiniband/hw/hfi1/mmu_rb.c @@ -173,7 +173,7 @@ int hfi1_mmu_rb_insert(struct mmu_rb_handler *handler, goto unlock; } __mmu_int_rb_insert(mnode, &handler->root); - list_add(&mnode->list, &handler->lru_list); + list_add_tail(&mnode->list, &handler->lru_list); ret = handler->ops->insert(handler->ops_arg, mnode); if (ret) { @@ -220,8 +220,10 @@ bool hfi1_mmu_rb_remove_unless_exact(struct mmu_rb_handler *handler, spin_lock_irqsave(&handler->lock, flags); node = __mmu_rb_search(handler, addr, len); if (node) { - if (node->addr == addr && node->len == len) + if (node->addr == addr && node->len == len) { + list_move_tail(&node->list, &handler->lru_list); goto unlock; + } __mmu_int_rb_remove(node, &handler->root); list_del(&node->list); /* remove from LRU list */ ret = true; @@ -242,8 +244,7 @@ void hfi1_mmu_rb_evict(struct mmu_rb_handler *handler, void *evict_arg) INIT_LIST_HEAD(&del_list); spin_lock_irqsave(&handler->lock, flags); - list_for_each_entry_safe_reverse(rbnode, ptr, &handler->lru_list, - list) { + list_for_each_entry_safe(rbnode, ptr, &handler->lru_list, list) { if (handler->ops->evict(handler->ops_arg, rbnode, evict_arg, &stop)) { __mmu_int_rb_remove(rbnode, &handler->root); @@ -255,9 +256,7 @@ void hfi1_mmu_rb_evict(struct mmu_rb_handler *handler, void *evict_arg) } spin_unlock_irqrestore(&handler->lock, flags); - while (!list_empty(&del_list)) { - rbnode = list_first_entry(&del_list, struct mmu_rb_node, list); - list_del(&rbnode->list); + list_for_each_entry_safe(rbnode, ptr, &del_list, list) { handler->ops->remove(handler->ops_arg, rbnode); } } From 919f470337e1788f65382b61fe9377196a3b51cf Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 13 Mar 2023 18:45:53 -0400 Subject: [PATCH 165/755] NFSv4.1: Always send a RECLAIM_COMPLETE after establishing lease [ Upstream commit 40882deb83c29d8df4470d4e5e7f137b6acf7ad1 ] The spec requires that we always at least send a RECLAIM_COMPLETE when we're done establishing the lease and recovering any state. Fixes: fce5c838e133 ("nfs41: RECLAIM_COMPLETE functionality") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin --- fs/nfs/nfs4state.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 2ee30ffeb6b9..01b185670594 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -66,6 +66,8 @@ #define OPENOWNER_POOL_SIZE 8 +static void nfs4_state_start_reclaim_reboot(struct nfs_client *clp); + const nfs4_stateid zero_stateid = { { .data = { 0 } }, .type = NFS4_SPECIAL_STATEID_TYPE, @@ -329,6 +331,8 @@ do_confirm: status = nfs4_proc_create_session(clp, cred); if (status != 0) goto out; + if (!(clp->cl_exchange_flags & EXCHGID4_FLAG_CONFIRMED_R)) + nfs4_state_start_reclaim_reboot(clp); nfs41_finish_session_reset(clp); nfs_mark_client_ready(clp, NFS_CS_READY); out: From d537afa08e156a0a72562e625506825c2776fcfa Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Mon, 18 Jan 2021 13:32:34 +0100 Subject: [PATCH 166/755] firmware: raspberrypi: Keep count of all consumers MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 1e7c57355a3bc617fc220234889e49fe722a6305 ] When unbinding the firmware device we need to make sure it has no consumers left. Otherwise we'd leave them with a firmware handle pointing at freed memory. Keep a reference count of all consumers and introduce rpi_firmware_put() which will permit automatically decrease the reference count upon unbinding consumer drivers. Suggested-by: Uwe Kleine-König Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli Reviewed-by: Stephen Boyd Reviewed-by: Bartosz Golaszewski Stable-dep-of: 5bca3688bdbc ("Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe") Signed-off-by: Sasha Levin --- drivers/firmware/raspberrypi.c | 40 ++++++++++++++++++++-- include/soc/bcm2835/raspberrypi-firmware.h | 2 ++ 2 files changed, 39 insertions(+), 3 deletions(-) diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index da26a584dca0..eb3b052a407e 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -27,6 +28,8 @@ struct rpi_firmware { struct mbox_chan *chan; /* The property channel. */ struct completion c; u32 enabled; + + struct kref consumers; }; static DEFINE_MUTEX(transaction_lock); @@ -214,12 +217,31 @@ static void rpi_register_clk_driver(struct device *dev) -1, NULL, 0); } +static void rpi_firmware_delete(struct kref *kref) +{ + struct rpi_firmware *fw = container_of(kref, struct rpi_firmware, + consumers); + + mbox_free_channel(fw->chan); + kfree(fw); +} + +void rpi_firmware_put(struct rpi_firmware *fw) +{ + kref_put(&fw->consumers, rpi_firmware_delete); +} +EXPORT_SYMBOL_GPL(rpi_firmware_put); + static int rpi_firmware_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct rpi_firmware *fw; - fw = devm_kzalloc(dev, sizeof(*fw), GFP_KERNEL); + /* + * Memory will be freed by rpi_firmware_delete() once all users have + * released their firmware handles. Don't use devm_kzalloc() here. + */ + fw = kzalloc(sizeof(*fw), GFP_KERNEL); if (!fw) return -ENOMEM; @@ -236,6 +258,7 @@ static int rpi_firmware_probe(struct platform_device *pdev) } init_completion(&fw->c); + kref_init(&fw->consumers); platform_set_drvdata(pdev, fw); @@ -264,7 +287,8 @@ static int rpi_firmware_remove(struct platform_device *pdev) rpi_hwmon = NULL; platform_device_unregister(rpi_clk); rpi_clk = NULL; - mbox_free_channel(fw->chan); + + rpi_firmware_put(fw); return 0; } @@ -273,16 +297,26 @@ static int rpi_firmware_remove(struct platform_device *pdev) * rpi_firmware_get - Get pointer to rpi_firmware structure. * @firmware_node: Pointer to the firmware Device Tree node. * + * The reference to rpi_firmware has to be released with rpi_firmware_put(). + * * Returns NULL is the firmware device is not ready. */ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) { struct platform_device *pdev = of_find_device_by_node(firmware_node); + struct rpi_firmware *fw; if (!pdev) return NULL; - return platform_get_drvdata(pdev); + fw = platform_get_drvdata(pdev); + if (!fw) + return NULL; + + if (!kref_get_unless_zero(&fw->consumers)) + return NULL; + + return fw; } EXPORT_SYMBOL_GPL(rpi_firmware_get); diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index 7800e12ee042..f11e9d3f6fd3 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -140,6 +140,7 @@ int rpi_firmware_property(struct rpi_firmware *fw, u32 tag, void *data, size_t len); int rpi_firmware_property_list(struct rpi_firmware *fw, void *data, size_t tag_size); +void rpi_firmware_put(struct rpi_firmware *fw); struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); #else static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag, @@ -154,6 +155,7 @@ static inline int rpi_firmware_property_list(struct rpi_firmware *fw, return -ENOSYS; } +static inline void rpi_firmware_put(struct rpi_firmware *fw) { } static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) { return NULL; From de85be00a8f30c98aa10fff13580271a59da2be5 Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Mon, 18 Jan 2021 13:32:35 +0100 Subject: [PATCH 167/755] firmware: raspberrypi: Introduce devm_rpi_firmware_get() [ Upstream commit f663204c9a1f8d6fcc590667d9d7a9f44e064644 ] It'll simplify the firmware handling for most consumers. Suggested-by: Bartosz Golaszewski Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli Reviewed-by: Bartosz Golaszewski Stable-dep-of: 5bca3688bdbc ("Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe") Signed-off-by: Sasha Levin --- drivers/firmware/raspberrypi.c | 29 ++++++++++++++++++++++ include/soc/bcm2835/raspberrypi-firmware.h | 8 ++++++ 2 files changed, 37 insertions(+) diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index eb3b052a407e..6a60b5bde0c9 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -232,6 +232,13 @@ void rpi_firmware_put(struct rpi_firmware *fw) } EXPORT_SYMBOL_GPL(rpi_firmware_put); +static void devm_rpi_firmware_put(void *data) +{ + struct rpi_firmware *fw = data; + + rpi_firmware_put(fw); +} + static int rpi_firmware_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -320,6 +327,28 @@ struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node) } EXPORT_SYMBOL_GPL(rpi_firmware_get); +/** + * devm_rpi_firmware_get - Get pointer to rpi_firmware structure. + * @firmware_node: Pointer to the firmware Device Tree node. + * + * Returns NULL is the firmware device is not ready. + */ +struct rpi_firmware *devm_rpi_firmware_get(struct device *dev, + struct device_node *firmware_node) +{ + struct rpi_firmware *fw; + + fw = rpi_firmware_get(firmware_node); + if (!fw) + return NULL; + + if (devm_add_action_or_reset(dev, devm_rpi_firmware_put, fw)) + return NULL; + + return fw; +} +EXPORT_SYMBOL_GPL(devm_rpi_firmware_get); + static const struct of_device_id rpi_firmware_of_match[] = { { .compatible = "raspberrypi,bcm2835-firmware", }, {}, diff --git a/include/soc/bcm2835/raspberrypi-firmware.h b/include/soc/bcm2835/raspberrypi-firmware.h index f11e9d3f6fd3..cf6e58fa5266 100644 --- a/include/soc/bcm2835/raspberrypi-firmware.h +++ b/include/soc/bcm2835/raspberrypi-firmware.h @@ -142,6 +142,8 @@ int rpi_firmware_property_list(struct rpi_firmware *fw, void *data, size_t tag_size); void rpi_firmware_put(struct rpi_firmware *fw); struct rpi_firmware *rpi_firmware_get(struct device_node *firmware_node); +struct rpi_firmware *devm_rpi_firmware_get(struct device *dev, + struct device_node *firmware_node); #else static inline int rpi_firmware_property(struct rpi_firmware *fw, u32 tag, void *data, size_t len) @@ -160,6 +162,12 @@ static inline struct rpi_firmware *rpi_firmware_get(struct device_node *firmware { return NULL; } + +static inline struct rpi_firmware *devm_rpi_firmware_get(struct device *dev, + struct device_node *firmware_node) +{ + return NULL; +} #endif #endif /* __SOC_RASPBERRY_FIRMWARE_H__ */ From ce6c42f0b644f5bb7a7233d41bd54085f3a46e27 Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Mon, 18 Jan 2021 13:32:41 +0100 Subject: [PATCH 168/755] input: raspberrypi-ts: Release firmware handle when not needed [ Upstream commit 3b8ddff780b7d12e99ae39177f84b9003097777a ] There is no use for the firmware interface after getting the touch buffer address, so release it. Signed-off-by: Nicolas Saenz Julienne Acked-by: Dmitry Torokhov Reviewed-by: Florian Fainelli Stable-dep-of: 5bca3688bdbc ("Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe") Signed-off-by: Sasha Levin --- drivers/input/touchscreen/raspberrypi-ts.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/input/touchscreen/raspberrypi-ts.c b/drivers/input/touchscreen/raspberrypi-ts.c index 69881265d121..4740a7c41236 100644 --- a/drivers/input/touchscreen/raspberrypi-ts.c +++ b/drivers/input/touchscreen/raspberrypi-ts.c @@ -164,7 +164,7 @@ static int rpi_ts_probe(struct platform_device *pdev) touchbuf = (u32)ts->fw_regs_phys; error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF, &touchbuf, sizeof(touchbuf)); - + rpi_firmware_put(fw); if (error || touchbuf != 0) { dev_warn(dev, "Failed to set touchbuf, %d\n", error); return error; From 1dfa3c9dd27bdc347733d06e980395768520bc3e Mon Sep 17 00:00:00 2001 From: Miaoqian Lin Date: Thu, 13 Apr 2023 23:05:20 -0700 Subject: [PATCH 169/755] Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe [ Upstream commit 5bca3688bdbc3b58a2894b8671a8e2378efe28bd ] rpi_firmware_get() take reference, we need to release it in error paths as well. Use devm_rpi_firmware_get() helper to handling the resources. Also remove the existing rpi_firmware_put(). Fixes: 0b9f28fed3f7 ("Input: add official Raspberry Pi's touchscreen driver") Fixes: 3b8ddff780b7 ("input: raspberrypi-ts: Release firmware handle when not needed") Signed-off-by: Miaoqian Lin Reviewed-by: Mattijs Korpershoek Link: https://lore.kernel.org/r/20221223074657.810346-1-linmq006@gmail.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin --- drivers/input/touchscreen/raspberrypi-ts.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/input/touchscreen/raspberrypi-ts.c b/drivers/input/touchscreen/raspberrypi-ts.c index 4740a7c41236..8135a80226fd 100644 --- a/drivers/input/touchscreen/raspberrypi-ts.c +++ b/drivers/input/touchscreen/raspberrypi-ts.c @@ -137,7 +137,7 @@ static int rpi_ts_probe(struct platform_device *pdev) return -ENOENT; } - fw = rpi_firmware_get(fw_node); + fw = devm_rpi_firmware_get(&pdev->dev, fw_node); of_node_put(fw_node); if (!fw) return -EPROBE_DEFER; @@ -164,7 +164,6 @@ static int rpi_ts_probe(struct platform_device *pdev) touchbuf = (u32)ts->fw_regs_phys; error = rpi_firmware_property(fw, RPI_FIRMWARE_FRAMEBUFFER_SET_TOUCHBUF, &touchbuf, sizeof(touchbuf)); - rpi_firmware_put(fw); if (error || touchbuf != 0) { dev_warn(dev, "Failed to set touchbuf, %d\n", error); return error; From 9bf843683a3263778a6d133264f74ef29c476b20 Mon Sep 17 00:00:00 2001 From: Dai Ngo Date: Tue, 18 Apr 2023 13:19:02 -0700 Subject: [PATCH 170/755] SUNRPC: remove the maximum number of retries in call_bind_status [ Upstream commit 691d0b782066a6eeeecbfceb7910a8f6184e6105 ] Currently call_bind_status places a hard limit of 3 to the number of retries on EACCES error. This limit was done to prevent NLM unlock requests from being hang forever when the server keeps returning garbage. However this change causes problem for cases when NLM service takes longer than 9 seconds to register with the port mapper after a restart. This patch removes this hard coded limit and let the RPC handles the retry based on the standard hard/soft task semantics. Fixes: 0b760113a3a1 ("NLM: Don't hang forever on NLM unlock requests") Reported-by: Helen Chao Tested-by: Helen Chao Signed-off-by: Dai Ngo Reviewed-by: Jeff Layton Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin --- include/linux/sunrpc/sched.h | 3 +-- net/sunrpc/clnt.c | 3 --- net/sunrpc/sched.c | 1 - 3 files changed, 1 insertion(+), 6 deletions(-) diff --git a/include/linux/sunrpc/sched.h b/include/linux/sunrpc/sched.h index a6ef35184ef1..5c37fabdec10 100644 --- a/include/linux/sunrpc/sched.h +++ b/include/linux/sunrpc/sched.h @@ -90,8 +90,7 @@ struct rpc_task { #endif unsigned char tk_priority : 2,/* Task priority */ tk_garb_retry : 2, - tk_cred_retry : 2, - tk_rebind_retry : 2; + tk_cred_retry : 2; }; typedef void (*rpc_action)(struct rpc_task *); diff --git a/net/sunrpc/clnt.c b/net/sunrpc/clnt.c index 012b0504264d..629c05ff1f3e 100644 --- a/net/sunrpc/clnt.c +++ b/net/sunrpc/clnt.c @@ -2003,9 +2003,6 @@ call_bind_status(struct rpc_task *task) status = -EOPNOTSUPP; break; } - if (task->tk_rebind_retry == 0) - break; - task->tk_rebind_retry--; rpc_delay(task, 3*HZ); goto retry_timeout; case -ENOBUFS: diff --git a/net/sunrpc/sched.c b/net/sunrpc/sched.c index 32ffa801a5b9..a5c6a3d05741 100644 --- a/net/sunrpc/sched.c +++ b/net/sunrpc/sched.c @@ -827,7 +827,6 @@ rpc_init_task_statistics(struct rpc_task *task) /* Initialize retry counters */ task->tk_garb_retry = 2; task->tk_cred_retry = 2; - task->tk_rebind_retry = 2; /* starting timestamp */ task->tk_start = ktime_get(); From 945e9898624dd10dbd54a0dddb52fba42a9d415a Mon Sep 17 00:00:00 2001 From: Mark Zhang Date: Thu, 20 Apr 2023 04:39:06 +0300 Subject: [PATCH 171/755] RDMA/mlx5: Use correct device num_ports when modify DC [ Upstream commit 746aa3c8cb1a650ff2583497ac646e505831b9b9 ] Just like other QP types, when modify DC, the port_num should be compared with dev->num_ports, instead of HCA_CAP.num_ports. Otherwise Multi-port vHCA on DC may not work. Fixes: 776a3906b692 ("IB/mlx5: Add support for DC target QP") Link: https://lore.kernel.org/r/20230420013906.1244185-1-markzhang@nvidia.com Signed-off-by: Mark Zhang Reviewed-by: Maor Gottlieb Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/hw/mlx5/qp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index 6edd30c92156..51623431b879 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -3821,7 +3821,7 @@ static int mlx5_ib_modify_dct(struct ib_qp *ibqp, struct ib_qp_attr *attr, return -EINVAL; if (attr->port_num == 0 || - attr->port_num > MLX5_CAP_GEN(dev->mdev, num_ports)) { + attr->port_num > dev->num_ports) { mlx5_ib_dbg(dev, "invalid port number %d. number of ports is %d\n", attr->port_num, dev->num_ports); return -EINVAL; From fc051820d616c294ce2d9dbaa1a6cf049d171944 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Thu, 9 Apr 2020 11:25:43 +0200 Subject: [PATCH 172/755] clocksource/drivers/davinci: Avoid trailing '\n' hidden in pr_fmt() [ Upstream commit bdf8783c0dae9d3d8fc1c4078fe849ab8aa8b583 ] pr_xxx() functions usually have '\n' at the end of the logging message. Here, this '\n' is added via the 'pr_fmt' macro. In order to be more consistent with other files, use a more standard convention and put these '\n' back in the messages themselves and remove it from the pr_fmt macro. While at it, remove a useless message in case of 'kzalloc' failure, especially with a __GFP_NOFAIL flag. Signed-off-by: Christophe JAILLET Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200409092543.14727-1-christophe.jaillet@wanadoo.fr Stable-dep-of: fb73556386e0 ("clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails") Signed-off-by: Sasha Levin --- drivers/clocksource/timer-davinci.c | 22 ++++++++++------------ 1 file changed, 10 insertions(+), 12 deletions(-) diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c index e421946a91c5..aae938368230 100644 --- a/drivers/clocksource/timer-davinci.c +++ b/drivers/clocksource/timer-davinci.c @@ -18,7 +18,7 @@ #include #undef pr_fmt -#define pr_fmt(fmt) "%s: " fmt "\n", __func__ +#define pr_fmt(fmt) "%s: " fmt, __func__ #define DAVINCI_TIMER_REG_TIM12 0x10 #define DAVINCI_TIMER_REG_TIM34 0x14 @@ -250,20 +250,20 @@ int __init davinci_timer_register(struct clk *clk, rv = clk_prepare_enable(clk); if (rv) { - pr_err("Unable to prepare and enable the timer clock"); + pr_err("Unable to prepare and enable the timer clock\n"); return rv; } if (!request_mem_region(timer_cfg->reg.start, resource_size(&timer_cfg->reg), "davinci-timer")) { - pr_err("Unable to request memory region"); + pr_err("Unable to request memory region\n"); return -EBUSY; } base = ioremap(timer_cfg->reg.start, resource_size(&timer_cfg->reg)); if (!base) { - pr_err("Unable to map the register range"); + pr_err("Unable to map the register range\n"); return -ENOMEM; } @@ -271,10 +271,8 @@ int __init davinci_timer_register(struct clk *clk, tick_rate = clk_get_rate(clk); clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL | __GFP_NOFAIL); - if (!clockevent) { - pr_err("Error allocating memory for clockevent data"); + if (!clockevent) return -ENOMEM; - } clockevent->dev.name = "tim12"; clockevent->dev.features = CLOCK_EVT_FEAT_ONESHOT; @@ -298,7 +296,7 @@ int __init davinci_timer_register(struct clk *clk, davinci_timer_irq_timer, IRQF_TIMER, "clockevent/tim12", clockevent); if (rv) { - pr_err("Unable to request the clockevent interrupt"); + pr_err("Unable to request the clockevent interrupt\n"); return rv; } @@ -325,7 +323,7 @@ int __init davinci_timer_register(struct clk *clk, rv = clocksource_register_hz(&davinci_clocksource.dev, tick_rate); if (rv) { - pr_err("Unable to register clocksource"); + pr_err("Unable to register clocksource\n"); return rv; } @@ -343,20 +341,20 @@ static int __init of_davinci_timer_register(struct device_node *np) rv = of_address_to_resource(np, 0, &timer_cfg.reg); if (rv) { - pr_err("Unable to get the register range for timer"); + pr_err("Unable to get the register range for timer\n"); return rv; } rv = of_irq_to_resource_table(np, timer_cfg.irq, DAVINCI_TIMER_NUM_IRQS); if (rv != DAVINCI_TIMER_NUM_IRQS) { - pr_err("Unable to get the interrupts for timer"); + pr_err("Unable to get the interrupts for timer\n"); return rv; } clk = of_clk_get(np, 0); if (IS_ERR(clk)) { - pr_err("Unable to get the timer clock"); + pr_err("Unable to get the timer clock\n"); return PTR_ERR(clk); } From f2aaf419889c7f189538b7ac4a939c0fa8cf2014 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Thu, 9 Apr 2020 12:12:26 +0200 Subject: [PATCH 173/755] clocksource: davinci: axe a pointless __GFP_NOFAIL [ Upstream commit 4855f2bd91b6e3461af7d795bfe9a40420122131 ] There is no need to specify __GFP_NOFAIL when allocating memory here, so axe it. Signed-off-by: Christophe JAILLET Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/20200409101226.15432-1-christophe.jaillet@wanadoo.fr Stable-dep-of: fb73556386e0 ("clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails") Signed-off-by: Sasha Levin --- drivers/clocksource/timer-davinci.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c index aae938368230..bb4eee31ae08 100644 --- a/drivers/clocksource/timer-davinci.c +++ b/drivers/clocksource/timer-davinci.c @@ -270,7 +270,7 @@ int __init davinci_timer_register(struct clk *clk, davinci_timer_init(base); tick_rate = clk_get_rate(clk); - clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL | __GFP_NOFAIL); + clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL); if (!clockevent) return -ENOMEM; From 2fd44d2bde34e4b797a29b35c174062a421e5aac Mon Sep 17 00:00:00 2001 From: Qinrun Dai Date: Thu, 13 Apr 2023 13:50:37 +0000 Subject: [PATCH 174/755] clocksource/drivers/davinci: Fix memory leak in davinci_timer_register when init fails [ Upstream commit fb73556386e074e9bee9fa2d253aeaefe4e063e0 ] Smatch reports: drivers/clocksource/timer-davinci.c:332 davinci_timer_register() warn: 'base' from ioremap() not released on lines: 274. Fix this and other potential memory leak problems by adding a set of corresponding exit lables. Fixes: 721154f972aa ("clocksource/drivers/davinci: Add support for clockevents") Signed-off-by: Qinrun Dai Link: https://lore.kernel.org/r/20230413135037.1505799-1-flno@hust.edu.cn Signed-off-by: Daniel Lezcano Signed-off-by: Sasha Levin --- drivers/clocksource/timer-davinci.c | 30 +++++++++++++++++++++++------ 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/drivers/clocksource/timer-davinci.c b/drivers/clocksource/timer-davinci.c index bb4eee31ae08..3dc0c6ceed02 100644 --- a/drivers/clocksource/timer-davinci.c +++ b/drivers/clocksource/timer-davinci.c @@ -258,21 +258,25 @@ int __init davinci_timer_register(struct clk *clk, resource_size(&timer_cfg->reg), "davinci-timer")) { pr_err("Unable to request memory region\n"); - return -EBUSY; + rv = -EBUSY; + goto exit_clk_disable; } base = ioremap(timer_cfg->reg.start, resource_size(&timer_cfg->reg)); if (!base) { pr_err("Unable to map the register range\n"); - return -ENOMEM; + rv = -ENOMEM; + goto exit_mem_region; } davinci_timer_init(base); tick_rate = clk_get_rate(clk); clockevent = kzalloc(sizeof(*clockevent), GFP_KERNEL); - if (!clockevent) - return -ENOMEM; + if (!clockevent) { + rv = -ENOMEM; + goto exit_iounmap_base; + } clockevent->dev.name = "tim12"; clockevent->dev.features = CLOCK_EVT_FEAT_ONESHOT; @@ -297,7 +301,7 @@ int __init davinci_timer_register(struct clk *clk, "clockevent/tim12", clockevent); if (rv) { pr_err("Unable to request the clockevent interrupt\n"); - return rv; + goto exit_free_clockevent; } davinci_clocksource.dev.rating = 300; @@ -324,13 +328,27 @@ int __init davinci_timer_register(struct clk *clk, rv = clocksource_register_hz(&davinci_clocksource.dev, tick_rate); if (rv) { pr_err("Unable to register clocksource\n"); - return rv; + goto exit_free_irq; } sched_clock_register(davinci_timer_read_sched_clock, DAVINCI_TIMER_CLKSRC_BITS, tick_rate); return 0; + +exit_free_irq: + free_irq(timer_cfg->irq[DAVINCI_TIMER_CLOCKEVENT_IRQ].start, + clockevent); +exit_free_clockevent: + kfree(clockevent); +exit_iounmap_base: + iounmap(base); +exit_mem_region: + release_mem_region(timer_cfg->reg.start, + resource_size(&timer_cfg->reg)); +exit_clk_disable: + clk_disable_unprepare(clk); + return rv; } static int __init of_davinci_timer_register(struct device_node *np) From 6dfd85ada867769a8712ee0b1e0951d8bde2b786 Mon Sep 17 00:00:00 2001 From: Stafford Horne Date: Sat, 11 Feb 2023 19:14:06 +0900 Subject: [PATCH 175/755] openrisc: Properly store r31 to pt_regs on unhandled exceptions [ Upstream commit 812489ac4dd91144a74ce65ecf232252a2e406fb ] In commit 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception") the unhandled exception path was changed to do an early store of r30 instead of r31. The entry code was not updated and r31 is not getting stored to pt_regs. This patch updates the entry handler to store r31 instead of r30. We also remove some misleading commented out store r30 and r31 instructrions. I noticed this while working on adding floating point exception handling, This issue probably would never impact anything since we kill the process or Oops right away on unhandled exceptions. Fixes: 91993c8c2ed5 ("openrisc: use shadow registers to save regs on exception") Signed-off-by: Stafford Horne Signed-off-by: Sasha Levin --- arch/openrisc/kernel/entry.S | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/openrisc/kernel/entry.S b/arch/openrisc/kernel/entry.S index 6b27cf4a0d78..8db433947d39 100644 --- a/arch/openrisc/kernel/entry.S +++ b/arch/openrisc/kernel/entry.S @@ -173,7 +173,6 @@ handler: ;\ l.sw PT_GPR28(r1),r28 ;\ l.sw PT_GPR29(r1),r29 ;\ /* r30 already save */ ;\ -/* l.sw PT_GPR30(r1),r30*/ ;\ l.sw PT_GPR31(r1),r31 ;\ TRACE_IRQS_OFF_ENTRY ;\ /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\ @@ -211,9 +210,8 @@ handler: ;\ l.sw PT_GPR27(r1),r27 ;\ l.sw PT_GPR28(r1),r28 ;\ l.sw PT_GPR29(r1),r29 ;\ - /* r31 already saved */ ;\ - l.sw PT_GPR30(r1),r30 ;\ -/* l.sw PT_GPR31(r1),r31 */ ;\ + /* r30 already saved */ ;\ + l.sw PT_GPR31(r1),r31 ;\ /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\ l.addi r30,r0,-1 ;\ l.sw PT_ORIG_GPR11(r1),r30 ;\ From a34f6dcb78c654ab905642c1b4e7e5fbb4f0babe Mon Sep 17 00:00:00 2001 From: Ye Bin Date: Thu, 6 Apr 2023 11:16:27 +0000 Subject: [PATCH 176/755] ext4: fix use-after-free read in ext4_find_extent for bigalloc + inline [ Upstream commit 835659598c67907b98cd2aa57bb951dfaf675c69 ] Syzbot found the following issue: loop0: detected capacity change from 0 to 2048 EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 without journal. Quota mode: none. ================================================================== BUG: KASAN: use-after-free in ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline] BUG: KASAN: use-after-free in ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931 Read of size 4 at addr ffff888073644750 by task syz-executor420/5067 CPU: 0 PID: 5067 Comm: syz-executor420 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:306 print_report+0x107/0x1f0 mm/kasan/report.c:417 kasan_report+0xcd/0x100 mm/kasan/report.c:517 ext4_ext_binsearch_idx fs/ext4/extents.c:768 [inline] ext4_find_extent+0x76e/0xd90 fs/ext4/extents.c:931 ext4_clu_mapped+0x117/0x970 fs/ext4/extents.c:5809 ext4_insert_delayed_block fs/ext4/inode.c:1696 [inline] ext4_da_map_blocks fs/ext4/inode.c:1806 [inline] ext4_da_get_block_prep+0x9e8/0x13c0 fs/ext4/inode.c:1870 ext4_block_write_begin+0x6a8/0x2290 fs/ext4/inode.c:1098 ext4_da_write_begin+0x539/0x760 fs/ext4/inode.c:3082 generic_perform_write+0x2e4/0x5e0 mm/filemap.c:3772 ext4_buffered_write_iter+0x122/0x3a0 fs/ext4/file.c:285 ext4_file_write_iter+0x1d0/0x18f0 call_write_iter include/linux/fs.h:2186 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x7dc/0xc50 fs/read_write.c:584 ksys_write+0x177/0x2a0 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f4b7a9737b9 RSP: 002b:00007ffc5cac3668 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f4b7a9737b9 RDX: 00000000175d9003 RSI: 0000000020000200 RDI: 0000000000000004 RBP: 00007f4b7a933050 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000079f R11: 0000000000000246 R12: 00007f4b7a9330e0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Above issue is happens when enable bigalloc and inline data feature. As commit 131294c35ed6 fixed delayed allocation bug in ext4_clu_mapped for bigalloc + inline. But it only resolved issue when has inline data, if inline data has been converted to extent(ext4_da_convert_inline_data_to_extent) before writepages, there is no EXT4_STATE_MAY_INLINE_DATA flag. However i_data is still store inline data in this scene. Then will trigger UAF when find extent. To resolve above issue, there is need to add judge "ext4_has_inline_data(inode)" in ext4_clu_mapped(). Fixes: 131294c35ed6 ("ext4: fix delayed allocation bug in ext4_clu_mapped for bigalloc + inline") Reported-by: syzbot+bf4bb7731ef73b83a3b4@syzkaller.appspotmail.com Reviewed-by: Jan Kara Reviewed-by: Ye Bin Reviewed-by: Tudor Ambarus Tested-by: Tudor Ambarus Link: https://lore.kernel.org/r/20230406111627.1916759-1-tudor.ambarus@linaro.org Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin --- fs/ext4/extents.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c index 27760c39f70e..478c35d45378 100644 --- a/fs/ext4/extents.c +++ b/fs/ext4/extents.c @@ -6027,7 +6027,8 @@ int ext4_clu_mapped(struct inode *inode, ext4_lblk_t lclu) * mapped - no physical clusters have been allocated, and the * file has no extents */ - if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) + if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA) || + ext4_has_inline_data(inode)) return 0; /* search for the extent closest to the first block in the cluster */ From 026df12f3c4d33ed157f9817bc8edf0d2278f889 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 25 Feb 2023 21:39:49 -0800 Subject: [PATCH 177/755] leds: TI_LMU_COMMON: select REGMAP instead of depending on it [ Upstream commit a61079efc87888587e463afaed82417b162fbd69 ] REGMAP is a hidden (not user visible) symbol. Users cannot set it directly thru "make *config", so drivers should select it instead of depending on it if they need it. Consistently using "select" or "depends on" can also help reduce Kconfig circular dependency issues. Therefore, change the use of "depends on REGMAP" to "select REGMAP". Fixes: 3fce8e1eb994 ("leds: TI LMU: Add common code for TI LMU devices") Signed-off-by: Randy Dunlap Acked-by: Pavel Machek Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20230226053953.4681-5-rdunlap@infradead.org Signed-off-by: Sasha Levin --- drivers/leds/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index 2cbf66d1c300..34334adcad01 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -802,7 +802,7 @@ config LEDS_SPI_BYTE config LEDS_TI_LMU_COMMON tristate "LED driver for TI LMU" depends on LEDS_CLASS - depends on REGMAP + select REGMAP help Say Y to enable the LED driver for TI LMU devices. This supports common features between the TI LM3532, LM3631, LM3632, From 8e238e88822fc5a6db00b84ed940e2fe7d668f79 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 26 Mar 2023 09:06:37 +0200 Subject: [PATCH 178/755] dmaengine: mv_xor_v2: Fix an error code. [ Upstream commit 827026ae2e56ec05ef1155661079badbbfc0b038 ] If the probe is deferred, -EPROBE_DEFER should be returned, not +EPROBE_DEFER. Fixes: 3cd2c313f1d6 ("dmaengine: mv_xor_v2: Fix clock resource by adding a register clock") Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/201170dff832a3c496d125772e10070cd834ebf2.1679814350.git.christophe.jaillet@wanadoo.fr Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- drivers/dma/mv_xor_v2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/mv_xor_v2.c b/drivers/dma/mv_xor_v2.c index 3fa884145eb1..d5109d96ebf1 100644 --- a/drivers/dma/mv_xor_v2.c +++ b/drivers/dma/mv_xor_v2.c @@ -751,7 +751,7 @@ static int mv_xor_v2_probe(struct platform_device *pdev) xor_dev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(xor_dev->clk) && PTR_ERR(xor_dev->clk) == -EPROBE_DEFER) { - ret = EPROBE_DEFER; + ret = -EPROBE_DEFER; goto disable_reg_clk; } if (!IS_ERR(xor_dev->clk)) { From e5e9e59c456477a7212e1e0e3c134247772d1d19 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 7 Jul 2021 18:28:27 +0200 Subject: [PATCH 179/755] pwm: mtk-disp: Don't check the return code of pwmchip_remove() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 9b7b5736ffd5da6f8f6329ebe5f1829cbcf8afae ] pwmchip_remove() returns always 0. Don't use the value to make it possible to eventually change the function to return void. Also the driver core ignores the return value of mtk_disp_pwm_remove(). Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding Stable-dep-of: 36dd7f530ae7 ("pwm: mtk-disp: Disable shadow registers before setting backlight values") Signed-off-by: Sasha Levin --- drivers/pwm/pwm-mtk-disp.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c index 83b8be0209b7..af63aaab8e15 100644 --- a/drivers/pwm/pwm-mtk-disp.c +++ b/drivers/pwm/pwm-mtk-disp.c @@ -240,13 +240,12 @@ disable_clk_main: static int mtk_disp_pwm_remove(struct platform_device *pdev) { struct mtk_disp_pwm *mdp = platform_get_drvdata(pdev); - int ret; - ret = pwmchip_remove(&mdp->chip); + pwmchip_remove(&mdp->chip); clk_unprepare(mdp->clk_mm); clk_unprepare(mdp->clk_main); - return ret; + return 0; } static const struct mtk_pwm_data mt2701_pwm_data = { From 33f00f0a7368485667395afb06227350ed728f79 Mon Sep 17 00:00:00 2001 From: Jitao Shi Date: Sun, 8 Aug 2021 21:24:29 +0800 Subject: [PATCH 180/755] pwm: mtk-disp: Adjust the clocks to avoid them mismatch [ Upstream commit d7a4e582587d97a586b1f7709e3bddcf35928e96 ] The clks "main" and "mm" are prepared in .probe() (and unprepared in .remove()). This results in the clocks being on during suspend which results in unnecessarily increased power consumption. Remove the clock operations from .probe() and .remove(). Add the clk_prepare_enable() in .enable() and the clk_disable_unprepare() in .disable(). Signed-off-by: Jitao Shi [thierry.reding@gmail.com: squashed in fixup patch] Signed-off-by: Thierry Reding Stable-dep-of: 36dd7f530ae7 ("pwm: mtk-disp: Disable shadow registers before setting backlight values") Signed-off-by: Sasha Levin --- drivers/pwm/pwm-mtk-disp.c | 95 +++++++++++++++++--------------------- 1 file changed, 43 insertions(+), 52 deletions(-) diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c index af63aaab8e15..a594a0fdddd7 100644 --- a/drivers/pwm/pwm-mtk-disp.c +++ b/drivers/pwm/pwm-mtk-disp.c @@ -74,6 +74,19 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, u64 div, rate; int err; + err = clk_prepare_enable(mdp->clk_main); + if (err < 0) { + dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n", ERR_PTR(err)); + return err; + } + + err = clk_prepare_enable(mdp->clk_mm); + if (err < 0) { + dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n", ERR_PTR(err)); + clk_disable_unprepare(mdp->clk_main); + return err; + } + /* * Find period, high_width and clk_div to suit duty_ns and period_ns. * Calculate proper div value to keep period value in the bound. @@ -87,8 +100,11 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, rate = clk_get_rate(mdp->clk_main); clk_div = div_u64(rate * period_ns, NSEC_PER_SEC) >> PWM_PERIOD_BIT_WIDTH; - if (clk_div > PWM_CLKDIV_MAX) + if (clk_div > PWM_CLKDIV_MAX) { + clk_disable_unprepare(mdp->clk_mm); + clk_disable_unprepare(mdp->clk_main); return -EINVAL; + } div = NSEC_PER_SEC * (clk_div + 1); period = div64_u64(rate * period_ns, div); @@ -98,16 +114,6 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, high_width = div64_u64(rate * duty_ns, div); value = period | (high_width << PWM_HIGH_WIDTH_SHIFT); - err = clk_enable(mdp->clk_main); - if (err < 0) - return err; - - err = clk_enable(mdp->clk_mm); - if (err < 0) { - clk_disable(mdp->clk_main); - return err; - } - mtk_disp_pwm_update_bits(mdp, mdp->data->con0, PWM_CLKDIV_MASK, clk_div << PWM_CLKDIV_SHIFT); @@ -122,10 +128,21 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, mtk_disp_pwm_update_bits(mdp, mdp->data->commit, mdp->data->commit_mask, 0x0); + } else { + /* + * For MT2701, disable double buffer before writing register + * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH. + */ + mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug, + mdp->data->bls_debug_mask, + mdp->data->bls_debug_mask); + mtk_disp_pwm_update_bits(mdp, mdp->data->con0, + mdp->data->con0_sel, + mdp->data->con0_sel); } - clk_disable(mdp->clk_mm); - clk_disable(mdp->clk_main); + clk_disable_unprepare(mdp->clk_mm); + clk_disable_unprepare(mdp->clk_main); return 0; } @@ -135,13 +152,16 @@ static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip); int err; - err = clk_enable(mdp->clk_main); - if (err < 0) - return err; - - err = clk_enable(mdp->clk_mm); + err = clk_prepare_enable(mdp->clk_main); if (err < 0) { - clk_disable(mdp->clk_main); + dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n", ERR_PTR(err)); + return err; + } + + err = clk_prepare_enable(mdp->clk_mm); + if (err < 0) { + dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n", ERR_PTR(err)); + clk_disable_unprepare(mdp->clk_main); return err; } @@ -158,8 +178,8 @@ static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask, 0x0); - clk_disable(mdp->clk_mm); - clk_disable(mdp->clk_main); + clk_disable_unprepare(mdp->clk_mm); + clk_disable_unprepare(mdp->clk_main); } static const struct pwm_ops mtk_disp_pwm_ops = { @@ -194,14 +214,6 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev) if (IS_ERR(mdp->clk_mm)) return PTR_ERR(mdp->clk_mm); - ret = clk_prepare(mdp->clk_main); - if (ret < 0) - return ret; - - ret = clk_prepare(mdp->clk_mm); - if (ret < 0) - goto disable_clk_main; - mdp->chip.dev = &pdev->dev; mdp->chip.ops = &mtk_disp_pwm_ops; mdp->chip.base = -1; @@ -209,32 +221,13 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev) ret = pwmchip_add(&mdp->chip); if (ret < 0) { - dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); - goto disable_clk_mm; + dev_err(&pdev->dev, "pwmchip_add() failed: %pe\n", ERR_PTR(ret)); + return ret; } platform_set_drvdata(pdev, mdp); - /* - * For MT2701, disable double buffer before writing register - * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH. - */ - if (!mdp->data->has_commit) { - mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug, - mdp->data->bls_debug_mask, - mdp->data->bls_debug_mask); - mtk_disp_pwm_update_bits(mdp, mdp->data->con0, - mdp->data->con0_sel, - mdp->data->con0_sel); - } - return 0; - -disable_clk_mm: - clk_unprepare(mdp->clk_mm); -disable_clk_main: - clk_unprepare(mdp->clk_main); - return ret; } static int mtk_disp_pwm_remove(struct platform_device *pdev) @@ -242,8 +235,6 @@ static int mtk_disp_pwm_remove(struct platform_device *pdev) struct mtk_disp_pwm *mdp = platform_get_drvdata(pdev); pwmchip_remove(&mdp->chip); - clk_unprepare(mdp->clk_mm); - clk_unprepare(mdp->clk_main); return 0; } From 58e026465814a3b21fcf583db3a5df073cef19fe Mon Sep 17 00:00:00 2001 From: AngeloGioacchino Del Regno Date: Mon, 3 Apr 2023 15:30:53 +0200 Subject: [PATCH 181/755] pwm: mtk-disp: Disable shadow registers before setting backlight values MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 36dd7f530ae7d9ce9e853ffb8aa337de65c6600b ] If shadow registers usage is not desired, disable that before performing any write to CON0/1 registers in the .apply() callback, otherwise we may lose clkdiv or period/width updates. Fixes: cd4b45ac449a ("pwm: Add MediaTek MT2701 display PWM driver support") Signed-off-by: AngeloGioacchino Del Regno Reviewed-by: Nícolas F. R. A. Prado Tested-by: Nícolas F. R. A. Prado Reviewed-by: Alexandre Mergnat Tested-by: Alexandre Mergnat Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin --- drivers/pwm/pwm-mtk-disp.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c index a594a0fdddd7..327c780d433d 100644 --- a/drivers/pwm/pwm-mtk-disp.c +++ b/drivers/pwm/pwm-mtk-disp.c @@ -114,6 +114,19 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, high_width = div64_u64(rate * duty_ns, div); value = period | (high_width << PWM_HIGH_WIDTH_SHIFT); + if (mdp->data->bls_debug && !mdp->data->has_commit) { + /* + * For MT2701, disable double buffer before writing register + * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH. + */ + mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug, + mdp->data->bls_debug_mask, + mdp->data->bls_debug_mask); + mtk_disp_pwm_update_bits(mdp, mdp->data->con0, + mdp->data->con0_sel, + mdp->data->con0_sel); + } + mtk_disp_pwm_update_bits(mdp, mdp->data->con0, PWM_CLKDIV_MASK, clk_div << PWM_CLKDIV_SHIFT); @@ -128,17 +141,6 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, mtk_disp_pwm_update_bits(mdp, mdp->data->commit, mdp->data->commit_mask, 0x0); - } else { - /* - * For MT2701, disable double buffer before writing register - * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH. - */ - mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug, - mdp->data->bls_debug_mask, - mdp->data->bls_debug_mask); - mtk_disp_pwm_update_bits(mdp, mdp->data->con0, - mdp->data->con0_sel, - mdp->data->con0_sel); } clk_disable_unprepare(mdp->clk_mm); From 2e900f3631741fbc015a2bccf08390db223514b3 Mon Sep 17 00:00:00 2001 From: Gaosheng Cui Date: Tue, 29 Nov 2022 19:16:34 +0800 Subject: [PATCH 182/755] phy: tegra: xusb: Add missing tegra_xusb_port_unregister for usb2_port and ulpi_port [ Upstream commit e024854048e733391b31fe5a398704b31b9af803 ] The tegra_xusb_port_unregister should be called when usb2_port and ulpi_port map fails in tegra_xusb_add_usb2_port() or in tegra_xusb_add_ulpi_port(), fix it. Fixes: 53d2a715c240 ("phy: Add Tegra XUSB pad controller support") Signed-off-by: Gaosheng Cui Acked-by: Thierry Reding Link: https://lore.kernel.org/r/20221129111634.1547747-1-cuigaosheng1@huawei.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/phy/tegra/xusb.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/phy/tegra/xusb.c b/drivers/phy/tegra/xusb.c index bf5d80b97597..efe7abf459fd 100644 --- a/drivers/phy/tegra/xusb.c +++ b/drivers/phy/tegra/xusb.c @@ -606,6 +606,7 @@ static int tegra_xusb_add_usb2_port(struct tegra_xusb_padctl *padctl, usb2->base.lane = usb2->base.ops->map(&usb2->base); if (IS_ERR(usb2->base.lane)) { err = PTR_ERR(usb2->base.lane); + tegra_xusb_port_unregister(&usb2->base); goto out; } @@ -658,6 +659,7 @@ static int tegra_xusb_add_ulpi_port(struct tegra_xusb_padctl *padctl, ulpi->base.lane = ulpi->base.ops->map(&ulpi->base); if (IS_ERR(ulpi->base.lane)) { err = PTR_ERR(ulpi->base.lane); + tegra_xusb_port_unregister(&ulpi->base); goto out; } From 24c9c4ad23d30b5e0e3593492ba494b1854df19e Mon Sep 17 00:00:00 2001 From: Shunsuke Mie Date: Tue, 11 Apr 2023 19:17:57 +0900 Subject: [PATCH 183/755] dmaengine: dw-edma: Fix to change for continuous transfer [ Upstream commit a251994a441ee0a69ba7062c8cd2d08ead3db379 ] The dw-edma driver stops after processing a DMA request even if a request remains in the issued queue, which is not the expected behavior. The DMA engine API requires continuous processing. Add a trigger to start after one processing finished if there are requests remain. Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Signed-off-by: Shunsuke Mie Link: https://lore.kernel.org/r/20230411101758.438472-1-mie@igel.co.jp Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/dma/dw-edma/dw-edma-core.c | 20 +++++++++++--------- 1 file changed, 11 insertions(+), 9 deletions(-) diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c index afbd1a459019..ff6e8cf641db 100644 --- a/drivers/dma/dw-edma/dw-edma-core.c +++ b/drivers/dma/dw-edma/dw-edma-core.c @@ -165,7 +165,7 @@ static void vchan_free_desc(struct virt_dma_desc *vdesc) dw_edma_free_desc(vd2dw_edma_desc(vdesc)); } -static void dw_edma_start_transfer(struct dw_edma_chan *chan) +static int dw_edma_start_transfer(struct dw_edma_chan *chan) { struct dw_edma_chunk *child; struct dw_edma_desc *desc; @@ -173,16 +173,16 @@ static void dw_edma_start_transfer(struct dw_edma_chan *chan) vd = vchan_next_desc(&chan->vc); if (!vd) - return; + return 0; desc = vd2dw_edma_desc(vd); if (!desc) - return; + return 0; child = list_first_entry_or_null(&desc->chunk->list, struct dw_edma_chunk, list); if (!child) - return; + return 0; dw_edma_v0_core_start(child, !desc->xfer_sz); desc->xfer_sz += child->ll_region.sz; @@ -190,6 +190,8 @@ static void dw_edma_start_transfer(struct dw_edma_chan *chan) list_del(&child->list); kfree(child); desc->chunks_alloc--; + + return 1; } static int dw_edma_device_config(struct dma_chan *dchan, @@ -483,14 +485,14 @@ static void dw_edma_done_interrupt(struct dw_edma_chan *chan) switch (chan->request) { case EDMA_REQ_NONE: desc = vd2dw_edma_desc(vd); - if (desc->chunks_alloc) { - chan->status = EDMA_ST_BUSY; - dw_edma_start_transfer(chan); - } else { + if (!desc->chunks_alloc) { list_del(&vd->node); vchan_cookie_complete(vd); - chan->status = EDMA_ST_IDLE; } + + /* Continue transferring if there are remaining chunks or issued requests. + */ + chan->status = dw_edma_start_transfer(chan) ? EDMA_ST_BUSY : EDMA_ST_IDLE; break; case EDMA_REQ_STOP: From 8c821199bc28561d08071a20b77453ce209fba1c Mon Sep 17 00:00:00 2001 From: Shunsuke Mie Date: Tue, 11 Apr 2023 19:17:58 +0900 Subject: [PATCH 184/755] dmaengine: dw-edma: Fix to enable to issue dma request on DMA processing [ Upstream commit 970b17dfe264a9085ba4e593730ecfd496b950ab ] The issue_pending request is ignored while driver is processing a DMA request. Fix to issue the pending requests on any dma channel status. Fixes: e63d79d1ffcd ("dmaengine: Add Synopsys eDMA IP core driver") Signed-off-by: Shunsuke Mie Link: https://lore.kernel.org/r/20230411101758.438472-2-mie@igel.co.jp Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/dma/dw-edma/dw-edma-core.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c index ff6e8cf641db..25d65f64cd50 100644 --- a/drivers/dma/dw-edma/dw-edma-core.c +++ b/drivers/dma/dw-edma/dw-edma-core.c @@ -275,9 +275,12 @@ static void dw_edma_device_issue_pending(struct dma_chan *dchan) struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan); unsigned long flags; + if (!chan->configured) + return; + spin_lock_irqsave(&chan->vc.lock, flags); - if (chan->configured && chan->request == EDMA_REQ_NONE && - chan->status == EDMA_ST_IDLE && vchan_issue_pending(&chan->vc)) { + if (vchan_issue_pending(&chan->vc) && chan->request == EDMA_REQ_NONE && + chan->status == EDMA_ST_IDLE) { chan->status = EDMA_ST_BUSY; dw_edma_start_transfer(chan); } From 27263ff3978441e1140a48c0db6beb847d3e92bd Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Tue, 14 Feb 2023 17:18:25 +0200 Subject: [PATCH 185/755] dmaengine: at_xdmac: do not enable all cyclic channels [ Upstream commit f8435befd81dd85b7b610598551fadf675849bc1 ] Do not global enable all the cyclic channels in at_xdmac_resume(). Instead save the global status in at_xdmac_suspend() and re-enable the cyclic channel only if it was active before suspend. Fixes: e1f7c9eee707 ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by: Claudiu Beznea Link: https://lore.kernel.org/r/20230214151827.1050280-6-claudiu.beznea@microchip.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/dma/at_xdmac.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c index a406b3c0d170..fdf3b5be2d50 100644 --- a/drivers/dma/at_xdmac.c +++ b/drivers/dma/at_xdmac.c @@ -212,6 +212,7 @@ struct at_xdmac { int irq; struct clk *clk; u32 save_gim; + u32 save_gs; struct dma_pool *at_xdmac_desc_pool; struct at_xdmac_chan chan[0]; }; @@ -1922,6 +1923,7 @@ static int atmel_xdmac_suspend(struct device *dev) } } atxdmac->save_gim = at_xdmac_read(atxdmac, AT_XDMAC_GIM); + atxdmac->save_gs = at_xdmac_read(atxdmac, AT_XDMAC_GS); at_xdmac_off(atxdmac); clk_disable_unprepare(atxdmac->clk); @@ -1958,7 +1960,8 @@ static int atmel_xdmac_resume(struct device *dev) at_xdmac_chan_write(atchan, AT_XDMAC_CNDC, atchan->save_cndc); at_xdmac_chan_write(atchan, AT_XDMAC_CIE, atchan->save_cim); wmb(); - at_xdmac_write(atxdmac, AT_XDMAC_GE, atchan->mask); + if (atxdmac->save_gs & atchan->mask) + at_xdmac_write(atxdmac, AT_XDMAC_GE, atchan->mask); } } return 0; From 736aeb17b6a0176f0ad843905c2620e8dfd10e58 Mon Sep 17 00:00:00 2001 From: Marc Dionne Date: Fri, 2 Dec 2022 10:07:01 -0400 Subject: [PATCH 186/755] afs: Fix updating of i_size with dv jump from server [ Upstream commit d7f74e9a917503ee78f2b603a456d7227cf38919 ] If the data version returned from the server is larger than expected, the local data is invalidated, but we may still want to note the remote file size. Since we're setting change_size, we have to also set data_changed for the i_size to get updated. Fixes: 3f4aa9818163 ("afs: Fix EOF corruption") Signed-off-by: Marc Dionne Signed-off-by: David Howells cc: linux-afs@lists.infradead.org Signed-off-by: Sasha Levin --- fs/afs/inode.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 622363af4c1b..fd681eec49aa 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -227,6 +227,7 @@ static void afs_apply_status(struct afs_fs_cursor *fc, set_bit(AFS_VNODE_ZAP_DATA, &vnode->flags); } change_size = true; + data_changed = true; } else if (vnode->status.type == AFS_FTYPE_DIR) { /* Expected directory change is handled elsewhere so * that we can locally edit the directory and save on a From fd37a5c6998b938af30b36670a6e0e28c444da20 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 3 May 2023 16:39:56 +0200 Subject: [PATCH 187/755] parisc: Fix argument pointer in real64_call_asm() commit 6e3220ba3323a2c24be834aebf5d6e9f89d0993f upstream. Fix the argument pointer (ap) to point to real-mode memory instead of virtual memory. It's interesting that this issue hasn't shown up earlier, as this could have happened with any 64-bit PDC ROM code. I just noticed it because I suddenly faced a HPMC while trying to execute the 64-bit STI ROM code of an Visualize-FXe graphics card for the STI text console. Signed-off-by: Helge Deller Cc: Signed-off-by: Greg Kroah-Hartman --- arch/parisc/kernel/real2.S | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S index 2b16d8d6598f..c37010a13586 100644 --- a/arch/parisc/kernel/real2.S +++ b/arch/parisc/kernel/real2.S @@ -248,9 +248,6 @@ ENTRY_CFI(real64_call_asm) /* save fn */ copy %arg2, %r31 - /* set up the new ap */ - ldo 64(%arg1), %r29 - /* load up the arg registers from the saved arg area */ /* 32-bit calling convention passes first 4 args in registers */ ldd 0*REG_SZ(%arg1), %arg0 /* note overwriting arg0 */ @@ -262,7 +259,9 @@ ENTRY_CFI(real64_call_asm) ldd 7*REG_SZ(%arg1), %r19 ldd 1*REG_SZ(%arg1), %arg1 /* do this one last! */ + /* set up real-mode stack and real-mode ap */ tophys_r1 %sp + ldo -16(%sp), %r29 /* Reference param save area */ b,l rfi_virt2real,%r2 nop From 4569a292a84e340e97d178898ad1cfe1a3080a61 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Thu, 27 Apr 2023 10:15:26 +0900 Subject: [PATCH 188/755] nilfs2: do not write dirty data after degenerating to read-only commit 28a65b49eb53e172d23567005465019658bfdb4d upstream. According to syzbot's report, mark_buffer_dirty() called from nilfs_segctor_do_construct() outputs a warning with some patterns after nilfs2 detects metadata corruption and degrades to read-only mode. After such read-only degeneration, page cache data may be cleared through nilfs_clear_dirty_page() which may also clear the uptodate flag for their buffer heads. However, even after the degeneration, log writes are still performed by unmount processing etc., which causes mark_buffer_dirty() to be called for buffer heads without the "uptodate" flag and causes the warning. Since any writes should not be done to a read-only file system in the first place, this fixes the warning in mark_buffer_dirty() by letting nilfs_segctor_do_construct() abort early if in read-only mode. This also changes the retry check of nilfs_segctor_write_out() to avoid unnecessary log write retries if it detects -EROFS that nilfs_segctor_do_construct() returned. Link: https://lkml.kernel.org/r/20230427011526.13457-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Tested-by: Ryusuke Konishi Reported-by: syzbot+2af3bc9585be7f23f290@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=2af3bc9585be7f23f290 Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/nilfs2/segment.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c index b23ed9a35e5e..3091d1a3edde 100644 --- a/fs/nilfs2/segment.c +++ b/fs/nilfs2/segment.c @@ -2039,6 +2039,9 @@ static int nilfs_segctor_do_construct(struct nilfs_sc_info *sci, int mode) struct the_nilfs *nilfs = sci->sc_super->s_fs_info; int err; + if (sb_rdonly(sci->sc_super)) + return -EROFS; + nilfs_sc_cstage_set(sci, NILFS_ST_INIT); sci->sc_cno = nilfs->ns_cno; @@ -2724,7 +2727,7 @@ static void nilfs_segctor_write_out(struct nilfs_sc_info *sci) flush_work(&sci->sc_iput_work); - } while (ret && retrycount-- > 0); + } while (ret && ret != -EROFS && retrycount-- > 0); } /** From fe1cbbcb1a2532ee1654e1ff121be8906d83c6f0 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Mon, 1 May 2023 04:30:46 +0900 Subject: [PATCH 189/755] nilfs2: fix infinite loop in nilfs_mdt_get_block() commit a6a491c048882e7e424d407d32cba0b52d9ef2bf upstream. If the disk image that nilfs2 mounts is corrupted and a virtual block address obtained by block lookup for a metadata file is invalid, nilfs_bmap_lookup_at_level() may return the same internal return code as -ENOENT, meaning the block does not exist in the metadata file. This duplication of return codes confuses nilfs_mdt_get_block(), causing it to read and create a metadata block indefinitely. In particular, if this happens to the inode metadata file, ifile, semaphore i_rwsem can be left held, causing task hangs in lock_mount. Fix this issue by making nilfs_bmap_lookup_at_level() treat virtual block address translation failures with -ENOENT as metadata corruption instead of returning the error code. Link: https://lkml.kernel.org/r/20230430193046.6769-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Tested-by: Ryusuke Konishi Reported-by: syzbot+221d75710bde87fa0e97@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=221d75710bde87fa0e97 Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/nilfs2/bmap.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/fs/nilfs2/bmap.c b/fs/nilfs2/bmap.c index fb5a9a8a13cf..2ba57e4b4f0a 100644 --- a/fs/nilfs2/bmap.c +++ b/fs/nilfs2/bmap.c @@ -67,20 +67,28 @@ int nilfs_bmap_lookup_at_level(struct nilfs_bmap *bmap, __u64 key, int level, down_read(&bmap->b_sem); ret = bmap->b_ops->bop_lookup(bmap, key, level, ptrp); - if (ret < 0) { - ret = nilfs_bmap_convert_error(bmap, __func__, ret); + if (ret < 0) goto out; - } + if (NILFS_BMAP_USE_VBN(bmap)) { ret = nilfs_dat_translate(nilfs_bmap_get_dat(bmap), *ptrp, &blocknr); if (!ret) *ptrp = blocknr; + else if (ret == -ENOENT) { + /* + * If there was no valid entry in DAT for the block + * address obtained by b_ops->bop_lookup, then pass + * internal code -EINVAL to nilfs_bmap_convert_error + * to treat it as metadata corruption. + */ + ret = -EINVAL; + } } out: up_read(&bmap->b_sem); - return ret; + return nilfs_bmap_convert_error(bmap, __func__, ret); } int nilfs_bmap_lookup_contig(struct nilfs_bmap *bmap, __u64 key, __u64 *ptrp, From 14964127be77884003976a392c9faa9ebaabbbe1 Mon Sep 17 00:00:00 2001 From: Li Nan Date: Wed, 22 Feb 2023 12:10:00 +0800 Subject: [PATCH 190/755] md/raid10: fix null-ptr-deref in raid10_sync_request commit a405c6f0229526160aa3f177f65e20c86fce84c5 upstream. init_resync() inits mempool and sets conf->have_replacemnt at the beginning of sync, close_sync() frees the mempool when sync is completed. After [1] recovery might be skipped and init_resync() is called but close_sync() is not. null-ptr-deref occurs with r10bio->dev[i].repl_bio. The following is one way to reproduce the issue. 1) create a array, wait for resync to complete, mddev->recovery_cp is set to MaxSector. 2) recovery is woken and it is skipped. conf->have_replacement is set to 0 in init_resync(). close_sync() not called. 3) some io errors and rdev A is set to WantReplacement. 4) a new device is added and set to A's replacement. 5) recovery is woken, A have replacement, but conf->have_replacemnt is 0. r10bio->dev[i].repl_bio will not be alloced and null-ptr-deref occurs. Fix it by not calling init_resync() if recovery skipped. [1] commit 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled") Fixes: 7e83ccbecd60 ("md/raid10: Allow skipping recovery when clean arrays are assembled") Cc: stable@vger.kernel.org Signed-off-by: Li Nan Signed-off-by: Song Liu Link: https://lore.kernel.org/r/20230222041000.3341651-3-linan666@huaweicloud.com Signed-off-by: Greg Kroah-Hartman --- drivers/md/raid10.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index c792683a0dea..aee429ab114a 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2920,10 +2920,6 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, sector_t chunk_mask = conf->geo.chunk_mask; int page_idx = 0; - if (!mempool_initialized(&conf->r10buf_pool)) - if (init_resync(conf)) - return 0; - /* * Allow skipping a full rebuild for incremental assembly * of a clean array, like RAID1 does. @@ -2939,6 +2935,10 @@ static sector_t raid10_sync_request(struct mddev *mddev, sector_t sector_nr, return mddev->dev_sectors - sector_nr; } + if (!mempool_initialized(&conf->r10buf_pool)) + if (init_resync(conf)) + return 0; + skipped: max_sector = mddev->dev_sectors; if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery) || From 38afc633d374ffc5ca7cab4610a106e8f53b6b2f Mon Sep 17 00:00:00 2001 From: Tanmay Shah Date: Fri, 10 Mar 2023 17:24:05 -0800 Subject: [PATCH 191/755] mailbox: zynqmp: Fix IPI isr handling commit 74ad37a30ffee3643bc34f9ca7225b20a66abaaf upstream. Multiple IPI channels are mapped to same interrupt handler. Current isr implementation handles only one channel per isr. Fix this behavior by checking isr status bit of all child mailbox nodes. Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller") Signed-off-by: Tanmay Shah Acked-by: Michal Simek Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230311012407.1292118-3-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/mailbox/zynqmp-ipi-mailbox.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/mailbox/zynqmp-ipi-mailbox.c b/drivers/mailbox/zynqmp-ipi-mailbox.c index 1d0b8abbafc3..392df6b37bf5 100644 --- a/drivers/mailbox/zynqmp-ipi-mailbox.c +++ b/drivers/mailbox/zynqmp-ipi-mailbox.c @@ -152,7 +152,7 @@ static irqreturn_t zynqmp_ipi_interrupt(int irq, void *data) struct zynqmp_ipi_message *msg; u64 arg0, arg3; struct arm_smccc_res res; - int ret, i; + int ret, i, status = IRQ_NONE; (void)irq; arg0 = SMC_IPI_MAILBOX_STATUS_ENQUIRY; @@ -170,11 +170,11 @@ static irqreturn_t zynqmp_ipi_interrupt(int irq, void *data) memcpy_fromio(msg->data, mchan->req_buf, msg->len); mbox_chan_received_data(chan, (void *)msg); - return IRQ_HANDLED; + status = IRQ_HANDLED; } } } - return IRQ_NONE; + return status; } /** From ecdcefd312d48438bf454f8021eb27626298a089 Mon Sep 17 00:00:00 2001 From: Tanmay Shah Date: Fri, 10 Mar 2023 17:24:06 -0800 Subject: [PATCH 192/755] mailbox: zynqmp: Fix typo in IPI documentation commit 79963fbfc233759bd8a43462f120d15a1bd4f4fa upstream. Xilinx IPI message buffers allows 32-byte data transfer. Fix documentation that says 12 bytes Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller") Signed-off-by: Tanmay Shah Acked-by: Michal Simek Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230311012407.1292118-4-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- include/linux/mailbox/zynqmp-ipi-message.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/mailbox/zynqmp-ipi-message.h b/include/linux/mailbox/zynqmp-ipi-message.h index 9542b41eacfd..41c6bd711940 100644 --- a/include/linux/mailbox/zynqmp-ipi-message.h +++ b/include/linux/mailbox/zynqmp-ipi-message.h @@ -9,7 +9,7 @@ * @data: message payload * * This is the structure for data used in mbox_send_message - * the maximum length of data buffer is fixed to 12 bytes. + * the maximum length of data buffer is fixed to 32 bytes. * Client is supposed to be aware of this. */ struct zynqmp_ipi_message { From 4379d5ce9235b43b07f3eacb87aa80d974fdf88d Mon Sep 17 00:00:00 2001 From: Bitterblue Smith Date: Mon, 13 Mar 2023 15:42:59 +0200 Subject: [PATCH 193/755] wifi: rtl8xxxu: RTL8192EU always needs full init commit d46e04ccd40457a0119b76e11ab64a2ad403e138 upstream. Always run the entire init sequence (rtl8xxxu_init_device()) for RTL8192EU. It's what the vendor driver does too. This fixes a bug where the device is unable to connect after rebooting: wlp3s0f3u2: send auth to ... (try 1/3) wlp3s0f3u2: send auth to ... (try 2/3) wlp3s0f3u2: send auth to ... (try 3/3) wlp3s0f3u2: authentication with ... timed out Rebooting leaves the device powered on (partially? at least the firmware is still running), but not really in a working state. Cc: stable@vger.kernel.org Signed-off-by: Bitterblue Smith Acked-by: Jes Sorensen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/4eb111a9-d4c4-37d0-b376-4e202de7153c@gmail.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c index edd2960c109a..e26a722852ee 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_8192e.c @@ -1702,6 +1702,7 @@ struct rtl8xxxu_fileops rtl8192eu_fops = { .rx_desc_size = sizeof(struct rtl8xxxu_rxdesc24), .has_s0s1 = 0, .gen2_thermal_meter = 1, + .needs_full_init = 1, .adda_1t_init = 0x0fc01616, .adda_1t_path_on = 0x0fc01616, .adda_2t_path_on_a = 0x0fc01616, From 7cf5ce2857b8ad02913e5cab7a81354dff63ccca Mon Sep 17 00:00:00 2001 From: Quentin Schulz Date: Thu, 17 Nov 2022 13:04:31 +0100 Subject: [PATCH 194/755] clk: rockchip: rk3399: allow clk_cifout to force clk_cifout_src to reparent commit 933bf364e152cd60902cf9585c2ba310d593e69f upstream. clk_cifout is derived from clk_cifout_src through an integer divider limited to 32. clk_cifout_src is a child of either cpll, gpll or npll without any possibility of a divider of any sort. The default clock parent is cpll. Let's allow clk_cifout to ask its parent clk_cifout_src to reparent in order to find the real closest possible rate for clk_cifout and not one derived from cpll only. Cc: stable@vger.kernel.org # 4.10+ Fixes: fd8bc829336a ("clk: rockchip: fix the rk3399 cifout clock") Signed-off-by: Quentin Schulz Link: https://lore.kernel.org/r/20221117-rk3399-cifout-set-rate-parent-v1-0-432548d04081@theobroma-systems.com Signed-off-by: Heiko Stuebner Signed-off-by: Greg Kroah-Hartman --- drivers/clk/rockchip/clk-rk3399.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/rockchip/clk-rk3399.c b/drivers/clk/rockchip/clk-rk3399.c index ce1d2446f142..1a75cc9f68ef 100644 --- a/drivers/clk/rockchip/clk-rk3399.c +++ b/drivers/clk/rockchip/clk-rk3399.c @@ -1259,7 +1259,7 @@ static struct rockchip_clk_branch rk3399_clk_branches[] __initdata = { RK3399_CLKSEL_CON(56), 6, 2, MFLAGS, RK3399_CLKGATE_CON(10), 7, GFLAGS), - COMPOSITE_NOGATE(SCLK_CIF_OUT, "clk_cifout", mux_clk_cif_p, 0, + COMPOSITE_NOGATE(SCLK_CIF_OUT, "clk_cifout", mux_clk_cif_p, CLK_SET_RATE_PARENT, RK3399_CLKSEL_CON(56), 5, 1, MFLAGS, 0, 5, DFLAGS), /* gic */ From 946e067b4cdacda9af97bc175cb2d150062824a5 Mon Sep 17 00:00:00 2001 From: Peng Liu Date: Tue, 21 Mar 2023 14:19:29 +0800 Subject: [PATCH 195/755] scripts/gdb: fix lx-timerlist for Python3 commit 7362042f3556528e9e9b1eb5ce8d7a3a6331476b upstream. Below incompatibilities between Python2 and Python3 made lx-timerlist fail to run under Python3. o xrange() is replaced by range() in Python3 o bytes and str are different types in Python3 o the return value of Inferior.read_memory() is memoryview object in Python3 akpm: cc stable so that older kernels are properly debuggable under newer Python. Link: https://lkml.kernel.org/r/TYCP286MB2146EE1180A4D5176CBA8AB2C6819@TYCP286MB2146.JPNP286.PROD.OUTLOOK.COM Signed-off-by: Peng Liu Reviewed-by: Jan Kiszka Cc: Florian Fainelli Cc: Kieran Bingham Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- scripts/gdb/linux/timerlist.py | 4 +++- scripts/gdb/linux/utils.py | 5 ++++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/scripts/gdb/linux/timerlist.py b/scripts/gdb/linux/timerlist.py index 071d0dd5a634..51def847f1ef 100644 --- a/scripts/gdb/linux/timerlist.py +++ b/scripts/gdb/linux/timerlist.py @@ -73,7 +73,7 @@ def print_cpu(hrtimer_bases, cpu, max_clock_bases): ts = cpus.per_cpu(tick_sched_ptr, cpu) text = "cpu: {}\n".format(cpu) - for i in xrange(max_clock_bases): + for i in range(max_clock_bases): text += " clock {}:\n".format(i) text += print_base(cpu_base['clock_base'][i]) @@ -158,6 +158,8 @@ def pr_cpumask(mask): num_bytes = (nr_cpu_ids + 7) / 8 buf = utils.read_memoryview(inf, bits, num_bytes).tobytes() buf = binascii.b2a_hex(buf) + if type(buf) is not str: + buf=buf.decode() chunks = [] i = num_bytes diff --git a/scripts/gdb/linux/utils.py b/scripts/gdb/linux/utils.py index ea94221dbd39..8c33be7985b6 100644 --- a/scripts/gdb/linux/utils.py +++ b/scripts/gdb/linux/utils.py @@ -89,7 +89,10 @@ def get_target_endianness(): def read_memoryview(inf, start, length): - return memoryview(inf.read_memory(start, length)) + m = inf.read_memory(start, length) + if type(m) is memoryview: + return m + return memoryview(m) def read_u16(buffer, offset): From 5492d4081274dc2ac266d36814cb980abe6625f4 Mon Sep 17 00:00:00 2001 From: Qu Wenruo Date: Thu, 6 Apr 2023 13:00:34 +0800 Subject: [PATCH 196/755] btrfs: scrub: reject unsupported scrub flags commit 604e6681e114d05a2e384c4d1e8ef81918037ef5 upstream. Since the introduction of scrub interface, the only flag that we support is BTRFS_SCRUB_READONLY. Thus there is no sanity checks, if there are some undefined flags passed in, we just ignore them. This is problematic if we want to introduce new scrub flags, as we have no way to determine if such flags are supported. Address the problem by introducing a check for the flags, and if unsupported flags are set, return -EOPNOTSUPP to inform the user space. This check should be backported for all supported kernels before any new scrub flags are introduced. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Anand Jain Signed-off-by: Qu Wenruo Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/ioctl.c | 5 +++++ include/uapi/linux/btrfs.h | 1 + 2 files changed, 6 insertions(+) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 64b443aa61ca..22f95a5a58fe 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -4339,6 +4339,11 @@ static long btrfs_ioctl_scrub(struct file *file, void __user *arg) if (IS_ERR(sa)) return PTR_ERR(sa); + if (sa->flags & ~BTRFS_SCRUB_SUPPORTED_FLAGS) { + ret = -EOPNOTSUPP; + goto out; + } + if (!(sa->flags & BTRFS_SCRUB_READONLY)) { ret = mnt_want_write_file(file); if (ret) diff --git a/include/uapi/linux/btrfs.h b/include/uapi/linux/btrfs.h index 3ee0678c0a83..72cd9f61f054 100644 --- a/include/uapi/linux/btrfs.h +++ b/include/uapi/linux/btrfs.h @@ -162,6 +162,7 @@ struct btrfs_scrub_progress { }; #define BTRFS_SCRUB_READONLY 1 +#define BTRFS_SCRUB_SUPPORTED_FLAGS (BTRFS_SCRUB_READONLY) struct btrfs_ioctl_scrub_args { __u64 devid; /* in */ __u64 start; /* in */ From d8f66a19f8bea2da191aa818f361f42ad6bf39bd Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Wed, 5 Apr 2023 16:20:17 +0200 Subject: [PATCH 197/755] s390/dasd: fix hanging blockdevice after request requeue commit d8898ee50edecacdf0141f26fd90acf43d7e9cd7 upstream. The DASD driver does not kick the requeue list when requeuing IO requests to the blocklayer. This might lead to hanging blockdevice when there is no other trigger for this. Fix by automatically kick the requeue list when requeuing DASD requests to the blocklayer. Fixes: e443343e509a ("s390/dasd: blk-mq conversion") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Reviewed-by: Halil Pasic Link: https://lore.kernel.org/r/20230405142017.2446986-8-sth@linux.ibm.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- drivers/s390/block/dasd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 3362f235e891..187565830b5b 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -3000,7 +3000,7 @@ static int _dasd_requeue_request(struct dasd_ccw_req *cqr) return 0; spin_lock_irq(&cqr->dq->lock); req = (struct request *) cqr->callback_data; - blk_mq_requeue_request(req, false); + blk_mq_requeue_request(req, true); spin_unlock_irq(&cqr->dq->lock); return 0; From cbe0a7ec67c32576df986a9bfc2e74bced2e6feb Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 4 Apr 2023 11:59:00 -0400 Subject: [PATCH 198/755] dm clone: call kmem_cache_destroy() in dm_clone_init() error path commit 6827af4a9a9f5bb664c42abf7c11af4978d72201 upstream. Otherwise the _hydration_cache will leak if dm_register_target() fails. Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm-clone-target.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/md/dm-clone-target.c b/drivers/md/dm-clone-target.c index ce9d03f4e981..355afca2969d 100644 --- a/drivers/md/dm-clone-target.c +++ b/drivers/md/dm-clone-target.c @@ -2232,6 +2232,7 @@ static int __init dm_clone_init(void) r = dm_register_target(&clone_target); if (r < 0) { DMERR("Failed to register clone target"); + kmem_cache_destroy(_hydration_cache); return r; } From 6d126899b0747305c9d39a0bcf87e0df9c3f555b Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Tue, 4 Apr 2023 13:34:28 -0400 Subject: [PATCH 199/755] dm integrity: call kmem_cache_destroy() in dm_integrity_init() error path commit 6b79a428c02769f2a11f8ae76bf866226d134887 upstream. Otherwise the journal_io_cache will leak if dm_register_target() fails. Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm-integrity.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index 3c9a2be97e55..d7911c623edd 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -4288,11 +4288,13 @@ static int __init dm_integrity_init(void) } r = dm_register_target(&integrity_target); - - if (r < 0) + if (r < 0) { DMERR("register failed %d", r); + kmem_cache_destroy(journal_io_cache); + return r; + } - return r; + return 0; } static void __exit dm_integrity_exit(void) From 337b7af273562b73c46ef77a724604ad139ca762 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 18 Apr 2023 15:57:47 -0400 Subject: [PATCH 200/755] dm flakey: fix a crash with invalid table line commit 98dba02d9a93eec11bffbb93c7c51624290702d2 upstream. This command will crash with NULL pointer dereference: dmsetup create flakey --table \ "0 `blockdev --getsize /dev/ram0` flakey /dev/ram0 0 0 1 2 corrupt_bio_byte 512" Fix the crash by checking if arg_name is non-NULL before comparing it. Cc: stable@vger.kernel.org Signed-off-by: Mikulas Patocka Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm-flakey.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/md/dm-flakey.c b/drivers/md/dm-flakey.c index bed263267323..967d4ad6d32c 100644 --- a/drivers/md/dm-flakey.c +++ b/drivers/md/dm-flakey.c @@ -124,9 +124,9 @@ static int parse_features(struct dm_arg_set *as, struct flakey_c *fc, * Direction r or w? */ arg_name = dm_shift_arg(as); - if (!strcasecmp(arg_name, "w")) + if (arg_name && !strcasecmp(arg_name, "w")) fc->corrupt_bio_rw = WRITE; - else if (!strcasecmp(arg_name, "r")) + else if (arg_name && !strcasecmp(arg_name, "r")) fc->corrupt_bio_rw = READ; else { ti->error = "Invalid corrupt bio direction (r or w)"; From 29a1ef57c3be1d53ecadb749d45b0636e8245a89 Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Mon, 17 Apr 2023 11:59:56 -0400 Subject: [PATCH 201/755] dm ioctl: fix nested locking in table_clear() to remove deadlock concern commit 3d32aaa7e66d5c1479a3c31d6c2c5d45dd0d3b89 upstream. syzkaller found the following problematic rwsem locking (with write lock already held): down_read+0x9d/0x450 kernel/locking/rwsem.c:1509 dm_get_inactive_table+0x2b/0xc0 drivers/md/dm-ioctl.c:773 __dev_status+0x4fd/0x7c0 drivers/md/dm-ioctl.c:844 table_clear+0x197/0x280 drivers/md/dm-ioctl.c:1537 In table_clear, it first acquires a write lock https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L1520 down_write(&_hash_lock); Then before the lock is released at L1539, there is a path shown above: table_clear -> __dev_status -> dm_get_inactive_table -> down_read https://elixir.bootlin.com/linux/v6.2/source/drivers/md/dm-ioctl.c#L773 down_read(&_hash_lock); It tries to acquire the same read lock again, resulting in the deadlock problem. Fix this by moving table_clear()'s __dev_status() call to after its up_write(&_hash_lock); Cc: stable@vger.kernel.org Reported-by: Zheng Zhang Signed-off-by: Mike Snitzer Signed-off-by: Greg Kroah-Hartman --- drivers/md/dm-ioctl.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm-ioctl.c b/drivers/md/dm-ioctl.c index bcb282f11053..477e616a21c7 100644 --- a/drivers/md/dm-ioctl.c +++ b/drivers/md/dm-ioctl.c @@ -1435,11 +1435,12 @@ static int table_clear(struct file *filp, struct dm_ioctl *param, size_t param_s hc->new_map = NULL; } - param->flags &= ~DM_INACTIVE_PRESENT_FLAG; - - __dev_status(hc->md, param); md = hc->md; up_write(&_hash_lock); + + param->flags &= ~DM_INACTIVE_PRESENT_FLAG; + __dev_status(md, param); + if (old_map) { dm_sync_table(md); dm_table_destroy(old_map); From 5ead86d57583ff9589e4a1d07e1bbc23aca0bf66 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 3 Apr 2023 18:48:30 +0300 Subject: [PATCH 202/755] perf auxtrace: Fix address filter entire kernel size commit 1f9f33ccf0320be21703d9195dd2b36a1c9a07cb upstream. kallsyms is not completely in address order. In find_entire_kern_cb(), calculate the kernel end from the maximum address not the last symbol. Example: Before: $ sudo cat /proc/kallsyms | grep ' [twTw] ' | tail -1 ffffffffc00b8bd0 t bpf_prog_6deef7357e7b4530 [bpf] $ sudo cat /proc/kallsyms | grep ' [twTw] ' | sort | tail -1 ffffffffc15e0cc0 t iwl_mvm_exit [iwlmvm] $ perf.d093603a05aa record -v --kcore -e intel_pt// --filter 'filter *' -- uname |& grep filter Address filter: filter 0xffffffff93200000/0x2ceba000 After: $ perf.8fb0f7a01f8e record -v --kcore -e intel_pt// --filter 'filter *' -- uname |& grep filter Address filter: filter 0xffffffff93200000/0x2e3e2000 Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters") Signed-off-by: Adrian Hunter Cc: Adrian Hunter Cc: Ian Rogers Cc: Jiri Olsa Cc: Namhyung Kim Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230403154831.8651-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman --- tools/perf/util/auxtrace.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/tools/perf/util/auxtrace.c b/tools/perf/util/auxtrace.c index df4c575a0d94..3d5cd16ca4de 100644 --- a/tools/perf/util/auxtrace.c +++ b/tools/perf/util/auxtrace.c @@ -1825,6 +1825,7 @@ static int find_entire_kern_cb(void *arg, const char *name __maybe_unused, char type, u64 start) { struct sym_args *args = arg; + u64 size; if (!kallsyms__is_function(type)) return 0; @@ -1834,7 +1835,9 @@ static int find_entire_kern_cb(void *arg, const char *name __maybe_unused, args->start = start; } /* Don't know exactly where the kernel ends, so we add a page */ - args->size = round_up(start, page_size) + page_size - args->start; + size = round_up(start, page_size) + page_size - args->start; + if (size > args->size) + args->size = size; return 0; } From cef1b8a4df5c5e9835e3fc8607e4090209df84a0 Mon Sep 17 00:00:00 2001 From: Adrian Hunter Date: Mon, 3 Apr 2023 18:48:31 +0300 Subject: [PATCH 203/755] perf intel-pt: Fix CYC timestamps after standalone CBR commit 430635a0ef1ce958b7b4311f172694ece2c692b8 upstream. After a standalone CBR (not associated with TSC), update the cycles reference timestamp and reset the cycle count, so that CYC timestamps are calculated relative to that point with the new frequency. Fixes: cc33618619cefc6d ("perf tools: Add Intel PT support for decoding CYC packets") Signed-off-by: Adrian Hunter Cc: Adrian Hunter Cc: Ian Rogers Cc: Jiri Olsa Cc: Namhyung Kim Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230403154831.8651-2-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Greg Kroah-Hartman --- tools/perf/util/intel-pt-decoder/intel-pt-decoder.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c index eab7e8ef6789..52474e44fb28 100644 --- a/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c +++ b/tools/perf/util/intel-pt-decoder/intel-pt-decoder.c @@ -1592,6 +1592,8 @@ static void intel_pt_calc_cbr(struct intel_pt_decoder *decoder) decoder->cbr = cbr; decoder->cbr_cyc_to_tsc = decoder->max_non_turbo_ratio_fp / cbr; + decoder->cyc_ref_timestamp = decoder->timestamp; + decoder->cycle_cnt = 0; intel_pt_mtc_cyc_cnt_cbr(decoder); } From 29fb2a1a5f719df65e3595def88e4916eecb887e Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 1 May 2023 17:42:06 +0200 Subject: [PATCH 204/755] debugobject: Ensure pool refill (again) commit 0af462f19e635ad522f28981238334620881badc upstream. The recent fix to ensure atomicity of lookup and allocation inadvertently broke the pool refill mechanism. Prior to that change debug_objects_activate() and debug_objecs_assert_init() invoked debug_objecs_init() to set up the tracking object for statically initialized objects. That's not longer the case and debug_objecs_init() is now the only place which does pool refills. Depending on the number of statically initialized objects this can be enough to actually deplete the pool, which was observed by Ido via a debugobjects OOM warning. Restore the old behaviour by adding explicit refill opportunities to debug_objects_activate() and debug_objecs_assert_init(). Fixes: 63a759694eed ("debugobject: Prevent init race with static objects") Reported-by: Ido Schimmel Signed-off-by: Thomas Gleixner Tested-by: Ido Schimmel Link: https://lore.kernel.org/r/871qk05a9d.ffs@tglx Signed-off-by: Greg Kroah-Hartman --- lib/debugobjects.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/lib/debugobjects.c b/lib/debugobjects.c index c7cebd2abf48..bfb3eb8c9800 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -563,6 +563,16 @@ static struct debug_obj *lookup_object_or_alloc(void *addr, struct debug_bucket return NULL; } +static void debug_objects_fill_pool(void) +{ + /* + * On RT enabled kernels the pool refill must happen in preemptible + * context: + */ + if (!IS_ENABLED(CONFIG_PREEMPT_RT) || preemptible()) + fill_pool(); +} + static void __debug_object_init(void *addr, struct debug_obj_descr *descr, int onstack) { @@ -571,7 +581,7 @@ __debug_object_init(void *addr, struct debug_obj_descr *descr, int onstack) struct debug_obj *obj; unsigned long flags; - fill_pool(); + debug_objects_fill_pool(); db = get_bucket((unsigned long) addr); @@ -656,6 +666,8 @@ int debug_object_activate(void *addr, struct debug_obj_descr *descr) if (!debug_objects_enabled) return 0; + debug_objects_fill_pool(); + db = get_bucket((unsigned long) addr); raw_spin_lock_irqsave(&db->lock, flags); @@ -865,6 +877,8 @@ void debug_object_assert_init(void *addr, struct debug_obj_descr *descr) if (!debug_objects_enabled) return; + debug_objects_fill_pool(); + db = get_bucket((unsigned long) addr); raw_spin_lock_irqsave(&db->lock, flags); From c8b6063f13add68f89540aa5030ceee875f48aa2 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 2 May 2023 10:25:24 +0200 Subject: [PATCH 205/755] netfilter: nf_tables: deactivate anonymous set from preparation phase commit c1592a89942e9678f7d9c8030efa777c0d57edab upstream. Toggle deleted anonymous sets as inactive in the next generation, so users cannot perform any update on it. Clear the generation bitmask in case the transaction is aborted. The following KASAN splat shows a set element deletion for a bound anonymous set that has been already removed in the same transaction. [ 64.921510] ================================================================== [ 64.923123] BUG: KASAN: wild-memory-access in nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.924745] Write of size 8 at addr dead000000000122 by task test/890 [ 64.927903] CPU: 3 PID: 890 Comm: test Not tainted 6.3.0+ #253 [ 64.931120] Call Trace: [ 64.932699] [ 64.934292] dump_stack_lvl+0x33/0x50 [ 64.935908] ? nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.937551] kasan_report+0xda/0x120 [ 64.939186] ? nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.940814] nf_tables_commit+0xa24/0x1490 [nf_tables] [ 64.942452] ? __kasan_slab_alloc+0x2d/0x60 [ 64.944070] ? nf_tables_setelem_notify+0x190/0x190 [nf_tables] [ 64.945710] ? kasan_set_track+0x21/0x30 [ 64.947323] nfnetlink_rcv_batch+0x709/0xd90 [nfnetlink] [ 64.948898] ? nfnetlink_rcv_msg+0x480/0x480 [nfnetlink] Signed-off-by: Pablo Neira Ayuso Signed-off-by: Greg Kroah-Hartman --- include/net/netfilter/nf_tables.h | 1 + net/netfilter/nf_tables_api.c | 12 ++++++++++++ net/netfilter/nft_dynset.c | 2 +- net/netfilter/nft_lookup.c | 2 +- net/netfilter/nft_objref.c | 2 +- 5 files changed, 16 insertions(+), 3 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 886866bee8b2..ad2a52a6c478 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -493,6 +493,7 @@ struct nft_set_binding { }; enum nft_trans_phase; +void nf_tables_activate_set(const struct nft_ctx *ctx, struct nft_set *set); void nf_tables_deactivate_set(const struct nft_ctx *ctx, struct nft_set *set, struct nft_set_binding *binding, enum nft_trans_phase phase); diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 1a5294eb340c..7794fa4c669d 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -3909,12 +3909,24 @@ static void nf_tables_unbind_set(const struct nft_ctx *ctx, struct nft_set *set, } } +void nf_tables_activate_set(const struct nft_ctx *ctx, struct nft_set *set) +{ + if (nft_set_is_anonymous(set)) + nft_clear(ctx->net, set); + + set->use++; +} +EXPORT_SYMBOL_GPL(nf_tables_activate_set); + void nf_tables_deactivate_set(const struct nft_ctx *ctx, struct nft_set *set, struct nft_set_binding *binding, enum nft_trans_phase phase) { switch (phase) { case NFT_TRANS_PREPARE: + if (nft_set_is_anonymous(set)) + nft_deactivate_next(ctx->net, set); + set->use--; return; case NFT_TRANS_ABORT: diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c index 6bcc18124e5b..7f9e6c90f727 100644 --- a/net/netfilter/nft_dynset.c +++ b/net/netfilter/nft_dynset.c @@ -259,7 +259,7 @@ static void nft_dynset_activate(const struct nft_ctx *ctx, { struct nft_dynset *priv = nft_expr_priv(expr); - priv->set->use++; + nf_tables_activate_set(ctx, priv->set); } static void nft_dynset_destroy(const struct nft_ctx *ctx, diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c index 660bad688e2b..4eb4d076927e 100644 --- a/net/netfilter/nft_lookup.c +++ b/net/netfilter/nft_lookup.c @@ -129,7 +129,7 @@ static void nft_lookup_activate(const struct nft_ctx *ctx, { struct nft_lookup *priv = nft_expr_priv(expr); - priv->set->use++; + nf_tables_activate_set(ctx, priv->set); } static void nft_lookup_destroy(const struct nft_ctx *ctx, diff --git a/net/netfilter/nft_objref.c b/net/netfilter/nft_objref.c index bfd18d2b65a2..74c61278e6bd 100644 --- a/net/netfilter/nft_objref.c +++ b/net/netfilter/nft_objref.c @@ -180,7 +180,7 @@ static void nft_objref_map_activate(const struct nft_ctx *ctx, { struct nft_objref_map *priv = nft_expr_priv(expr); - priv->set->use++; + nf_tables_activate_set(ctx, priv->set); } static void nft_objref_map_destroy(const struct nft_ctx *ctx, From 9b2ed144318e2405ad4067cc5c7e04395074a05e Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 24 Jul 2019 15:22:59 +0200 Subject: [PATCH 206/755] nohz: Add TICK_DEP_BIT_RCU [ Upstream commit 01b4c39901e087ceebae2733857248de81476bd8 ] If a nohz_full CPU is looping in the kernel, the scheduling-clock tick might nevertheless remain disabled. In !PREEMPT kernels, this can prevent RCU's attempts to enlist the aid of that CPU's executions of cond_resched(), which can in turn result in an arbitrarily delayed grace period and thus an OOM. RCU therefore needs a way to enable a holdout nohz_full CPU's scheduler-clock interrupt. This commit therefore provides a new TICK_DEP_BIT_RCU value which RCU can pass to tick_dep_set_cpu() and friends to force on the scheduler-clock interrupt for a specified CPU or task. In some cases, rcutorture needs to turn on the scheduler-clock tick, so this commit also exports the relevant symbols to GPL-licensed modules. Signed-off-by: Frederic Weisbecker Signed-off-by: Paul E. McKenney Stable-dep-of: 58d766824264 ("tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem") Signed-off-by: Sasha Levin --- include/linux/tick.h | 7 ++++++- include/trace/events/timer.h | 3 ++- kernel/time/tick-sched.c | 7 +++++++ 3 files changed, 15 insertions(+), 2 deletions(-) diff --git a/include/linux/tick.h b/include/linux/tick.h index f92a10b5e112..39eb44564058 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -108,7 +108,8 @@ enum tick_dep_bits { TICK_DEP_BIT_POSIX_TIMER = 0, TICK_DEP_BIT_PERF_EVENTS = 1, TICK_DEP_BIT_SCHED = 2, - TICK_DEP_BIT_CLOCK_UNSTABLE = 3 + TICK_DEP_BIT_CLOCK_UNSTABLE = 3, + TICK_DEP_BIT_RCU = 4 }; #define TICK_DEP_MASK_NONE 0 @@ -116,6 +117,7 @@ enum tick_dep_bits { #define TICK_DEP_MASK_PERF_EVENTS (1 << TICK_DEP_BIT_PERF_EVENTS) #define TICK_DEP_MASK_SCHED (1 << TICK_DEP_BIT_SCHED) #define TICK_DEP_MASK_CLOCK_UNSTABLE (1 << TICK_DEP_BIT_CLOCK_UNSTABLE) +#define TICK_DEP_MASK_RCU (1 << TICK_DEP_BIT_RCU) #ifdef CONFIG_NO_HZ_COMMON extern bool tick_nohz_enabled; @@ -268,6 +270,9 @@ static inline bool tick_nohz_full_enabled(void) { return false; } static inline bool tick_nohz_full_cpu(int cpu) { return false; } static inline void tick_nohz_full_add_cpus_to(struct cpumask *mask) { } +static inline void tick_nohz_dep_set_cpu(int cpu, enum tick_dep_bits bit) { } +static inline void tick_nohz_dep_clear_cpu(int cpu, enum tick_dep_bits bit) { } + static inline void tick_dep_set(enum tick_dep_bits bit) { } static inline void tick_dep_clear(enum tick_dep_bits bit) { } static inline void tick_dep_set_cpu(int cpu, enum tick_dep_bits bit) { } diff --git a/include/trace/events/timer.h b/include/trace/events/timer.h index b7a904825e7d..295517f109d7 100644 --- a/include/trace/events/timer.h +++ b/include/trace/events/timer.h @@ -367,7 +367,8 @@ TRACE_EVENT(itimer_expire, tick_dep_name(POSIX_TIMER) \ tick_dep_name(PERF_EVENTS) \ tick_dep_name(SCHED) \ - tick_dep_name_end(CLOCK_UNSTABLE) + tick_dep_name(CLOCK_UNSTABLE) \ + tick_dep_name_end(RCU) #undef tick_dep_name #undef tick_dep_mask_name diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 1b5037ba4ec4..69bdaad4abe1 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -225,6 +225,11 @@ static bool check_tick_dependency(atomic_t *dep) return true; } + if (val & TICK_DEP_MASK_RCU) { + trace_tick_stop(0, TICK_DEP_MASK_RCU); + return true; + } + return false; } @@ -351,6 +356,7 @@ void tick_nohz_dep_set_cpu(int cpu, enum tick_dep_bits bit) preempt_enable(); } } +EXPORT_SYMBOL_GPL(tick_nohz_dep_set_cpu); void tick_nohz_dep_clear_cpu(int cpu, enum tick_dep_bits bit) { @@ -358,6 +364,7 @@ void tick_nohz_dep_clear_cpu(int cpu, enum tick_dep_bits bit) atomic_andnot(BIT(bit), &ts->tick_dep_mask); } +EXPORT_SYMBOL_GPL(tick_nohz_dep_clear_cpu); /* * Set a per-task tick dependency. Posix CPU timers need this in order to elapse From 352b152905cce85b65ba6e94a97635108a8318a2 Mon Sep 17 00:00:00 2001 From: "Joel Fernandes (Google)" Date: Tue, 24 Jan 2023 17:31:26 +0000 Subject: [PATCH 207/755] tick/nohz: Fix cpu_is_hotpluggable() by checking with nohz subsystem [ Upstream commit 58d7668242647e661a20efe065519abd6454287e ] For CONFIG_NO_HZ_FULL systems, the tick_do_timer_cpu cannot be offlined. However, cpu_is_hotpluggable() still returns true for those CPUs. This causes torture tests that do offlining to end up trying to offline this CPU causing test failures. Such failure happens on all architectures. Fix the repeated error messages thrown by this (even if the hotplug errors are harmless) by asking the opinion of the nohz subsystem on whether the CPU can be hotplugged. [ Apply Frederic Weisbecker feedback on refactoring tick_nohz_cpu_down(). ] For drivers/base/ portion: Acked-by: Greg Kroah-Hartman Acked-by: Frederic Weisbecker Cc: Frederic Weisbecker Cc: "Paul E. McKenney" Cc: Zhouyi Zhou Cc: Will Deacon Cc: Marc Zyngier Cc: rcu Cc: stable@vger.kernel.org Fixes: 2987557f52b9 ("driver-core/cpu: Expose hotpluggability to the rest of the kernel") Signed-off-by: Paul E. McKenney Signed-off-by: Joel Fernandes (Google) Signed-off-by: Sasha Levin --- drivers/base/cpu.c | 3 ++- include/linux/tick.h | 2 ++ kernel/time/tick-sched.c | 11 ++++++++--- 3 files changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 7000c836951c..980e9a76e172 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -491,7 +491,8 @@ static const struct attribute_group *cpu_root_attr_groups[] = { bool cpu_is_hotpluggable(unsigned cpu) { struct device *dev = get_cpu_device(cpu); - return dev && container_of(dev, struct cpu, dev)->hotpluggable; + return dev && container_of(dev, struct cpu, dev)->hotpluggable + && tick_nohz_cpu_hotpluggable(cpu); } EXPORT_SYMBOL_GPL(cpu_is_hotpluggable); diff --git a/include/linux/tick.h b/include/linux/tick.h index 39eb44564058..cf6c92060929 100644 --- a/include/linux/tick.h +++ b/include/linux/tick.h @@ -208,6 +208,7 @@ extern void tick_nohz_dep_set_signal(struct signal_struct *signal, enum tick_dep_bits bit); extern void tick_nohz_dep_clear_signal(struct signal_struct *signal, enum tick_dep_bits bit); +extern bool tick_nohz_cpu_hotpluggable(unsigned int cpu); /* * The below are tick_nohz_[set,clear]_dep() wrappers that optimize off-cases @@ -272,6 +273,7 @@ static inline void tick_nohz_full_add_cpus_to(struct cpumask *mask) { } static inline void tick_nohz_dep_set_cpu(int cpu, enum tick_dep_bits bit) { } static inline void tick_nohz_dep_clear_cpu(int cpu, enum tick_dep_bits bit) { } +static inline bool tick_nohz_cpu_hotpluggable(unsigned int cpu) { return true; } static inline void tick_dep_set(enum tick_dep_bits bit) { } static inline void tick_dep_clear(enum tick_dep_bits bit) { } diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 69bdaad4abe1..a70c611df137 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -432,7 +432,7 @@ void __init tick_nohz_full_setup(cpumask_var_t cpumask) tick_nohz_full_running = true; } -static int tick_nohz_cpu_down(unsigned int cpu) +bool tick_nohz_cpu_hotpluggable(unsigned int cpu) { /* * The tick_do_timer_cpu CPU handles housekeeping duty (unbound @@ -440,8 +440,13 @@ static int tick_nohz_cpu_down(unsigned int cpu) * CPUs. It must remain online when nohz full is enabled. */ if (tick_nohz_full_running && tick_do_timer_cpu == cpu) - return -EBUSY; - return 0; + return false; + return true; +} + +static int tick_nohz_cpu_down(unsigned int cpu) +{ + return tick_nohz_cpu_hotpluggable(cpu) ? 0 : -EBUSY; } void __init tick_nohz_init(void) From ff0d64f5127e31ed646449813d02f403a312a39b Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 20 Nov 2022 09:25:54 +0100 Subject: [PATCH 208/755] mailbox: zynq: Switch to flexible array to simplify code [ Upstream commit 043f85ce81cb1714e14d31c322c5646513dde3fb ] Using flexible array is more straight forward. It - saves 1 pointer in the 'zynqmp_ipi_pdata' structure - saves an indirection when using this array - saves some LoC and avoids some always spurious pointer arithmetic Signed-off-by: Christophe JAILLET Signed-off-by: Jassi Brar Stable-dep-of: f72f805e7288 ("mailbox: zynqmp: Fix counts of child nodes") Signed-off-by: Sasha Levin --- drivers/mailbox/zynqmp-ipi-mailbox.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/mailbox/zynqmp-ipi-mailbox.c b/drivers/mailbox/zynqmp-ipi-mailbox.c index 392df6b37bf5..1abeff765646 100644 --- a/drivers/mailbox/zynqmp-ipi-mailbox.c +++ b/drivers/mailbox/zynqmp-ipi-mailbox.c @@ -110,7 +110,7 @@ struct zynqmp_ipi_pdata { unsigned int method; u32 local_id; int num_mboxes; - struct zynqmp_ipi_mbox *ipi_mboxes; + struct zynqmp_ipi_mbox ipi_mboxes[]; }; static struct device_driver zynqmp_ipi_mbox_driver = { @@ -635,7 +635,7 @@ static int zynqmp_ipi_probe(struct platform_device *pdev) int num_mboxes, ret = -EINVAL; num_mboxes = of_get_child_count(np); - pdata = devm_kzalloc(dev, sizeof(*pdata) + (num_mboxes * sizeof(*mbox)), + pdata = devm_kzalloc(dev, struct_size(pdata, ipi_mboxes, num_mboxes), GFP_KERNEL); if (!pdata) return -ENOMEM; @@ -649,8 +649,6 @@ static int zynqmp_ipi_probe(struct platform_device *pdev) } pdata->num_mboxes = num_mboxes; - pdata->ipi_mboxes = (struct zynqmp_ipi_mbox *) - ((char *)pdata + sizeof(*pdata)); mbox = pdata->ipi_mboxes; for_each_available_child_of_node(np, nc) { From e4875d6e053d70061f2b52057f6ac7e379d669ea Mon Sep 17 00:00:00 2001 From: Tanmay Shah Date: Fri, 10 Mar 2023 17:24:04 -0800 Subject: [PATCH 209/755] mailbox: zynqmp: Fix counts of child nodes [ Upstream commit f72f805e72882c361e2a612c64a6e549f3da7152 ] If child mailbox node status is disabled it causes crash in interrupt handler. Fix this by assigning only available child node during driver probe. Fixes: 4981b82ba2ff ("mailbox: ZynqMP IPI mailbox controller") Signed-off-by: Tanmay Shah Acked-by: Michal Simek Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230311012407.1292118-2-tanmay.shah@amd.com Signed-off-by: Mathieu Poirier Signed-off-by: Sasha Levin --- drivers/mailbox/zynqmp-ipi-mailbox.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/mailbox/zynqmp-ipi-mailbox.c b/drivers/mailbox/zynqmp-ipi-mailbox.c index 1abeff765646..bb7bb1738647 100644 --- a/drivers/mailbox/zynqmp-ipi-mailbox.c +++ b/drivers/mailbox/zynqmp-ipi-mailbox.c @@ -634,7 +634,12 @@ static int zynqmp_ipi_probe(struct platform_device *pdev) struct zynqmp_ipi_mbox *mbox; int num_mboxes, ret = -EINVAL; - num_mboxes = of_get_child_count(np); + num_mboxes = of_get_available_child_count(np); + if (num_mboxes == 0) { + dev_err(dev, "mailbox nodes not available\n"); + return -EINVAL; + } + pdata = devm_kzalloc(dev, struct_size(pdata, ipi_mboxes, num_mboxes), GFP_KERNEL); if (!pdata) From 0156f7dbd822ecbc1fd614ca5e65b5a059ea6c83 Mon Sep 17 00:00:00 2001 From: Akilesh Kailash Date: Mon, 13 Sep 2021 09:26:42 +0000 Subject: [PATCH 210/755] dm verity: skip redundant verity_handle_err() on I/O errors [ Upstream commit 2c0468e054c0adb660ac055fc396622ec7235df9 ] Without FEC, dm-verity won't call verity_handle_err() when I/O fails, but with FEC enabled, it currently does even if an I/O error has occurred. If there is an I/O error and FEC correction fails, return the error instead of calling verity_handle_err() again. Suggested-by: Sami Tolvanen Signed-off-by: Akilesh Kailash Reviewed-by: Sami Tolvanen Signed-off-by: Mike Snitzer Stable-dep-of: e8c5d45f82ce ("dm verity: fix error handling for check_at_most_once on FEC") Signed-off-by: Sasha Levin --- drivers/md/dm-verity-target.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index 9dcdf34b7e32..aad0018cc7b2 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -471,6 +471,7 @@ static int verity_verify_io(struct dm_verity_io *io) struct bvec_iter start; unsigned b; struct crypto_wait wait; + struct bio *bio = dm_bio_from_per_bio_data(io, v->ti->per_io_data_size); for (b = 0; b < io->n_blocks; b++) { int r; @@ -525,9 +526,17 @@ static int verity_verify_io(struct dm_verity_io *io) else if (verity_fec_decode(v, io, DM_VERITY_BLOCK_TYPE_DATA, cur_block, NULL, &start) == 0) continue; - else if (verity_handle_err(v, DM_VERITY_BLOCK_TYPE_DATA, - cur_block)) - return -EIO; + else { + if (bio->bi_status) { + /* + * Error correction failed; Just return error + */ + return -EIO; + } + if (verity_handle_err(v, DM_VERITY_BLOCK_TYPE_DATA, + cur_block)) + return -EIO; + } } return 0; From 439d3a7056d55956d3675154e797b8251e0d6912 Mon Sep 17 00:00:00 2001 From: Yeongjin Gil Date: Mon, 20 Mar 2023 15:59:32 +0900 Subject: [PATCH 211/755] dm verity: fix error handling for check_at_most_once on FEC [ Upstream commit e8c5d45f82ce0c238a4817739892fe8897a3dcc3 ] In verity_end_io(), if bi_status is not BLK_STS_OK, it can be return directly. But if FEC configured, it is desired to correct the data page through verity_verify_io. And the return value will be converted to blk_status and passed to verity_finish_io(). BTW, when a bit is set in v->validated_blocks, verity_verify_io() skips verification regardless of I/O error for the corresponding bio. In this case, the I/O error could not be returned properly, and as a result, there is a problem that abnormal data could be read for the corresponding block. To fix this problem, when an I/O error occurs, do not skip verification even if the bit related is set in v->validated_blocks. Fixes: 843f38d382b1 ("dm verity: add 'check_at_most_once' option to only validate hashes once") Cc: stable@vger.kernel.org Reviewed-by: Sungjong Seo Signed-off-by: Yeongjin Gil Signed-off-by: Mike Snitzer Signed-off-by: Sasha Levin --- drivers/md/dm-verity-target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/md/dm-verity-target.c b/drivers/md/dm-verity-target.c index aad0018cc7b2..965b5139c897 100644 --- a/drivers/md/dm-verity-target.c +++ b/drivers/md/dm-verity-target.c @@ -478,7 +478,7 @@ static int verity_verify_io(struct dm_verity_io *io) sector_t cur_block = io->block + b; struct ahash_request *req = verity_io_hash_req(v, io); - if (v->validated_blocks && + if (v->validated_blocks && bio->bi_status == BLK_STS_OK && likely(test_bit(cur_block, v->validated_blocks))) { verity_bv_skip_block(v, io, &io->iter); continue; From b9878f485d706ebed7b50dc9e66f86c71775303f Mon Sep 17 00:00:00 2001 From: Sven Auhagen Date: Tue, 21 Jul 2020 06:37:59 +0200 Subject: [PATCH 212/755] crypto: inside-secure - irq balance [ Upstream commit c6720415907f21b9c53efbe679b96c3cc9d06404 ] Balance the irqs of the inside secure driver over all available cpus. Currently all interrupts are handled by the first CPU. From my testing with IPSec AES-GCM 256 on my MCbin with 4 Cores I get a 50% speed increase: Before the patch: 99.73 Kpps With the patch: 151.25 Kpps Signed-off-by: Sven Auhagen Signed-off-by: Herbert Xu Stable-dep-of: ca25c00ccbc5 ("crypto: safexcel - Cleanup ring IRQ workqueues on load failure") Signed-off-by: Sasha Levin --- drivers/crypto/inside-secure/safexcel.c | 13 +++++++++++-- drivers/crypto/inside-secure/safexcel.h | 3 +++ 2 files changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/inside-secure/safexcel.c b/drivers/crypto/inside-secure/safexcel.c index 9534f52210af..2d34a3832d8e 100644 --- a/drivers/crypto/inside-secure/safexcel.c +++ b/drivers/crypto/inside-secure/safexcel.c @@ -1090,11 +1090,12 @@ static irqreturn_t safexcel_irq_ring_thread(int irq, void *data) static int safexcel_request_ring_irq(void *pdev, int irqid, int is_pci_dev, + int ring_id, irq_handler_t handler, irq_handler_t threaded_handler, struct safexcel_ring_irq_data *ring_irq_priv) { - int ret, irq; + int ret, irq, cpu; struct device *dev; if (IS_ENABLED(CONFIG_PCI) && is_pci_dev) { @@ -1132,6 +1133,10 @@ static int safexcel_request_ring_irq(void *pdev, int irqid, return ret; } + /* Set affinity */ + cpu = cpumask_local_spread(ring_id, NUMA_NO_NODE); + irq_set_affinity_hint(irq, get_cpu_mask(cpu)); + return irq; } @@ -1482,6 +1487,7 @@ static int safexcel_probe_generic(void *pdev, irq = safexcel_request_ring_irq(pdev, EIP197_IRQ_NUMBER(i, is_pci_dev), is_pci_dev, + i, safexcel_irq_ring, safexcel_irq_ring_thread, ring_irq); @@ -1490,6 +1496,7 @@ static int safexcel_probe_generic(void *pdev, return irq; } + priv->ring[i].irq = irq; priv->ring[i].work_data.priv = priv; priv->ring[i].work_data.ring = i; INIT_WORK(&priv->ring[i].work_data.work, @@ -1627,8 +1634,10 @@ static int safexcel_remove(struct platform_device *pdev) clk_disable_unprepare(priv->clk); - for (i = 0; i < priv->config.rings; i++) + for (i = 0; i < priv->config.rings; i++) { + irq_set_affinity_hint(priv->ring[i].irq, NULL); destroy_workqueue(priv->ring[i].workqueue); + } return 0; } diff --git a/drivers/crypto/inside-secure/safexcel.h b/drivers/crypto/inside-secure/safexcel.h index 930cc48a6f85..6a4d7f09bca9 100644 --- a/drivers/crypto/inside-secure/safexcel.h +++ b/drivers/crypto/inside-secure/safexcel.h @@ -640,6 +640,9 @@ struct safexcel_ring { */ struct crypto_async_request *req; struct crypto_async_request *backlog; + + /* irq of this ring */ + int irq; }; /* EIP integration context flags */ From 4f4de392f4926820ec1fd3573a016c704a68893d Mon Sep 17 00:00:00 2001 From: Jonathan McDowell Date: Tue, 28 Feb 2023 18:28:58 +0000 Subject: [PATCH 213/755] crypto: safexcel - Cleanup ring IRQ workqueues on load failure [ Upstream commit ca25c00ccbc5f942c63897ed23584cfc66e8ec81 ] A failure loading the safexcel driver results in the following warning on boot, because the IRQ affinity has not been correctly cleaned up. Ensure we clean up the affinity and workqueues on a failure to load the driver. crypto-safexcel: probe of f2800000.crypto failed with error -2 ------------[ cut here ]------------ WARNING: CPU: 1 PID: 232 at kernel/irq/manage.c:1913 free_irq+0x300/0x340 Modules linked in: hwmon mdio_i2c crypto_safexcel(+) md5 sha256_generic libsha256 authenc libdes omap_rng rng_core nft_masq nft_nat nft_chain_nat nf_nat nft_ct nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables libcrc32c nfnetlink fuse autofs4 CPU: 1 PID: 232 Comm: systemd-udevd Tainted: G W 6.1.6-00002-g9d4898824677 #3 Hardware name: MikroTik RB5009 (DT) pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : free_irq+0x300/0x340 lr : free_irq+0x2e0/0x340 sp : ffff800008fa3890 x29: ffff800008fa3890 x28: 0000000000000000 x27: 0000000000000000 x26: ffff8000008e6dc0 x25: ffff000009034cac x24: ffff000009034d50 x23: 0000000000000000 x22: 000000000000004a x21: ffff0000093e0d80 x20: ffff000009034c00 x19: ffff00000615fc00 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 000075f5c1584c5e x14: 0000000000000017 x13: 0000000000000000 x12: 0000000000000040 x11: ffff000000579b60 x10: ffff000000579b62 x9 : ffff800008bbe370 x8 : ffff000000579dd0 x7 : 0000000000000000 x6 : ffff000000579e18 x5 : ffff000000579da8 x4 : ffff800008ca0000 x3 : ffff800008ca0188 x2 : 0000000013033204 x1 : ffff000009034c00 x0 : ffff8000087eadf0 Call trace: free_irq+0x300/0x340 devm_irq_release+0x14/0x20 devres_release_all+0xa0/0x100 device_unbind_cleanup+0x14/0x60 really_probe+0x198/0x2d4 __driver_probe_device+0x74/0xdc driver_probe_device+0x3c/0x110 __driver_attach+0x8c/0x190 bus_for_each_dev+0x6c/0xc0 driver_attach+0x20/0x30 bus_add_driver+0x148/0x1fc driver_register+0x74/0x120 __platform_driver_register+0x24/0x30 safexcel_init+0x48/0x1000 [crypto_safexcel] do_one_initcall+0x4c/0x1b0 do_init_module+0x44/0x1cc load_module+0x1724/0x1be4 __do_sys_finit_module+0xbc/0x110 __arm64_sys_finit_module+0x1c/0x24 invoke_syscall+0x44/0x110 el0_svc_common.constprop.0+0xc0/0xe0 do_el0_svc+0x20/0x80 el0_svc+0x14/0x4c el0t_64_sync_handler+0xb0/0xb4 el0t_64_sync+0x148/0x14c ---[ end trace 0000000000000000 ]--- Fixes: 1b44c5a60c13 ("inside-secure - add SafeXcel EIP197 crypto engine driver") Signed-off-by: Jonathan McDowell Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/inside-secure/safexcel.c | 37 ++++++++++++++++++------- 1 file changed, 27 insertions(+), 10 deletions(-) diff --git a/drivers/crypto/inside-secure/safexcel.c b/drivers/crypto/inside-secure/safexcel.c index 2d34a3832d8e..04638e183351 100644 --- a/drivers/crypto/inside-secure/safexcel.c +++ b/drivers/crypto/inside-secure/safexcel.c @@ -1467,19 +1467,23 @@ static int safexcel_probe_generic(void *pdev, &priv->ring[i].rdr); if (ret) { dev_err(dev, "Failed to initialize rings\n"); - return ret; + goto err_cleanup_rings; } priv->ring[i].rdr_req = devm_kcalloc(dev, EIP197_DEFAULT_RING_SIZE, sizeof(*priv->ring[i].rdr_req), GFP_KERNEL); - if (!priv->ring[i].rdr_req) - return -ENOMEM; + if (!priv->ring[i].rdr_req) { + ret = -ENOMEM; + goto err_cleanup_rings; + } ring_irq = devm_kzalloc(dev, sizeof(*ring_irq), GFP_KERNEL); - if (!ring_irq) - return -ENOMEM; + if (!ring_irq) { + ret = -ENOMEM; + goto err_cleanup_rings; + } ring_irq->priv = priv; ring_irq->ring = i; @@ -1493,7 +1497,8 @@ static int safexcel_probe_generic(void *pdev, ring_irq); if (irq < 0) { dev_err(dev, "Failed to get IRQ ID for ring %d\n", i); - return irq; + ret = irq; + goto err_cleanup_rings; } priv->ring[i].irq = irq; @@ -1505,8 +1510,10 @@ static int safexcel_probe_generic(void *pdev, snprintf(wq_name, 9, "wq_ring%d", i); priv->ring[i].workqueue = create_singlethread_workqueue(wq_name); - if (!priv->ring[i].workqueue) - return -ENOMEM; + if (!priv->ring[i].workqueue) { + ret = -ENOMEM; + goto err_cleanup_rings; + } priv->ring[i].requests = 0; priv->ring[i].busy = false; @@ -1523,16 +1530,26 @@ static int safexcel_probe_generic(void *pdev, ret = safexcel_hw_init(priv); if (ret) { dev_err(dev, "HW init failed (%d)\n", ret); - return ret; + goto err_cleanup_rings; } ret = safexcel_register_algorithms(priv); if (ret) { dev_err(dev, "Failed to register algorithms (%d)\n", ret); - return ret; + goto err_cleanup_rings; } return 0; + +err_cleanup_rings: + for (i = 0; i < priv->config.rings; i++) { + if (priv->ring[i].irq) + irq_set_affinity_hint(priv->ring[i].irq, NULL); + if (priv->ring[i].workqueue) + destroy_workqueue(priv->ring[i].workqueue); + } + + return ret; } static void safexcel_hw_reset_rings(struct safexcel_crypto_priv *priv) From c038ae623a7cce7ea4a05af0ef9e7f4b5f7973e5 Mon Sep 17 00:00:00 2001 From: Pengcheng Yang Date: Thu, 4 Jun 2020 16:51:30 -0700 Subject: [PATCH 214/755] kernel/relay.c: fix read_pos error when multiple readers [ Upstream commit 341a7213e5c1ce274cc0f02270054905800ea660 ] When reading, read_pos should start with bytes_consumed, not file->f_pos. Because when there is more than one reader, the read_pos corresponding to file->f_pos may have been consumed, which will cause the data that has been consumed to be read and the bytes_consumed update error. Signed-off-by: Pengcheng Yang Signed-off-by: Andrew Morton Reviewed-by: Jens Axboe Cc: Greg Kroah-Hartman Cc: Jann Horn Cc: Al Viro e Link: http://lkml.kernel.org/r/1579691175-28949-1-git-send-email-yangpc@wangsu.com Signed-off-by: Linus Torvalds Stable-dep-of: 43ec16f1450f ("relayfs: fix out-of-bounds access in relay_file_read") Signed-off-by: Sasha Levin --- kernel/relay.c | 17 +++++++---------- 1 file changed, 7 insertions(+), 10 deletions(-) diff --git a/kernel/relay.c b/kernel/relay.c index 9b1cfcd8dc6b..989f78f16ad5 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -997,14 +997,14 @@ static void relay_file_read_consume(struct rchan_buf *buf, /* * relay_file_read_avail - boolean, are there unconsumed bytes available? */ -static int relay_file_read_avail(struct rchan_buf *buf, size_t read_pos) +static int relay_file_read_avail(struct rchan_buf *buf) { size_t subbuf_size = buf->chan->subbuf_size; size_t n_subbufs = buf->chan->n_subbufs; size_t produced = buf->subbufs_produced; size_t consumed = buf->subbufs_consumed; - relay_file_read_consume(buf, read_pos, 0); + relay_file_read_consume(buf, 0, 0); consumed = buf->subbufs_consumed; @@ -1065,23 +1065,20 @@ static size_t relay_file_read_subbuf_avail(size_t read_pos, /** * relay_file_read_start_pos - find the first available byte to read - * @read_pos: file read position * @buf: relay channel buffer * - * If the @read_pos is in the middle of padding, return the + * If the read_pos is in the middle of padding, return the * position of the first actually available byte, otherwise * return the original value. */ -static size_t relay_file_read_start_pos(size_t read_pos, - struct rchan_buf *buf) +static size_t relay_file_read_start_pos(struct rchan_buf *buf) { size_t read_subbuf, padding, padding_start, padding_end; size_t subbuf_size = buf->chan->subbuf_size; size_t n_subbufs = buf->chan->n_subbufs; size_t consumed = buf->subbufs_consumed % n_subbufs; + size_t read_pos = consumed * subbuf_size + buf->bytes_consumed; - if (!read_pos) - read_pos = consumed * subbuf_size + buf->bytes_consumed; read_subbuf = read_pos / subbuf_size; padding = buf->padding[read_subbuf]; padding_start = (read_subbuf + 1) * subbuf_size - padding; @@ -1137,10 +1134,10 @@ static ssize_t relay_file_read(struct file *filp, do { void *from; - if (!relay_file_read_avail(buf, *ppos)) + if (!relay_file_read_avail(buf)) break; - read_start = relay_file_read_start_pos(*ppos, buf); + read_start = relay_file_read_start_pos(buf); avail = relay_file_read_subbuf_avail(read_start, buf); if (!avail) break; From bc0905a76531fa10fd12d661328636453a36f4ce Mon Sep 17 00:00:00 2001 From: Zhang Zhengming Date: Wed, 19 Apr 2023 12:02:03 +0800 Subject: [PATCH 215/755] relayfs: fix out-of-bounds access in relay_file_read [ Upstream commit 43ec16f1450f4936025a9bdf1a273affdb9732c1 ] There is a crash in relay_file_read, as the var from point to the end of last subbuf. The oops looks something like: pc : __arch_copy_to_user+0x180/0x310 lr : relay_file_read+0x20c/0x2c8 Call trace: __arch_copy_to_user+0x180/0x310 full_proxy_read+0x68/0x98 vfs_read+0xb0/0x1d0 ksys_read+0x6c/0xf0 __arm64_sys_read+0x20/0x28 el0_svc_common.constprop.3+0x84/0x108 do_el0_svc+0x74/0x90 el0_svc+0x1c/0x28 el0_sync_handler+0x88/0xb0 el0_sync+0x148/0x180 We get the condition by analyzing the vmcore: 1). The last produced byte and last consumed byte both at the end of the last subbuf 2). A softirq calls function(e.g __blk_add_trace) to write relay buffer occurs when an program is calling relay_file_read_avail(). relay_file_read relay_file_read_avail relay_file_read_consume(buf, 0, 0); //interrupted by softirq who will write subbuf .... return 1; //read_start point to the end of the last subbuf read_start = relay_file_read_start_pos //avail is equal to subsize avail = relay_file_read_subbuf_avail //from points to an invalid memory address from = buf->start + read_start //system is crashed copy_to_user(buffer, from, avail) Link: https://lkml.kernel.org/r/20230419040203.37676-1-zhang.zhengming@h3c.com Fixes: 8d62fdebdaf9 ("relay file read: start-pos fix") Signed-off-by: Zhang Zhengming Reviewed-by: Zhao Lei Reviewed-by: Zhou Kete Reviewed-by: Pengcheng Yang Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Sasha Levin --- kernel/relay.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/kernel/relay.c b/kernel/relay.c index 989f78f16ad5..1e11199c7d7c 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -1077,7 +1077,8 @@ static size_t relay_file_read_start_pos(struct rchan_buf *buf) size_t subbuf_size = buf->chan->subbuf_size; size_t n_subbufs = buf->chan->n_subbufs; size_t consumed = buf->subbufs_consumed % n_subbufs; - size_t read_pos = consumed * subbuf_size + buf->bytes_consumed; + size_t read_pos = (consumed * subbuf_size + buf->bytes_consumed) + % (n_subbufs * subbuf_size); read_subbuf = read_pos / subbuf_size; padding = buf->padding[read_subbuf]; From 8acd3a28873f07f80640d58d75e61ab4e0086d51 Mon Sep 17 00:00:00 2001 From: Cosmo Chou Date: Wed, 26 Apr 2023 16:13:50 +0800 Subject: [PATCH 216/755] net/ncsi: clear Tx enable mode when handling a Config required AEN [ Upstream commit 6f75cd166a5a3c0bc50441faa8b8304f60522fdd ] ncsi_channel_is_tx() determines whether a given channel should be used for Tx or not. However, when reconfiguring the channel by handling a Configuration Required AEN, there is a misjudgment that the channel Tx has already been enabled, which results in the Enable Channel Network Tx command not being sent. Clear the channel Tx enable flag before reconfiguring the channel to avoid the misjudgment. Fixes: 8d951a75d022 ("net/ncsi: Configure multi-package, multi-channel modes with failover") Signed-off-by: Cosmo Chou Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/ncsi/ncsi-aen.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c index b635c194f0a8..62fb1031763d 100644 --- a/net/ncsi/ncsi-aen.c +++ b/net/ncsi/ncsi-aen.c @@ -165,6 +165,7 @@ static int ncsi_aen_handler_cr(struct ncsi_dev_priv *ndp, nc->state = NCSI_CHANNEL_INACTIVE; list_add_tail_rcu(&nc->link, &ndp->channel_queue); spin_unlock_irqrestore(&ndp->lock, flags); + nc->modes[NCSI_MODE_TX_ENABLE].enable = 0; return ncsi_process_next_channel(ndp); } From cc5fe387c6294d0471cb7ed064efac97fac65ccc Mon Sep 17 00:00:00 2001 From: Vlad Buslov Date: Wed, 26 Apr 2023 14:31:11 +0200 Subject: [PATCH 217/755] net/sched: cls_api: remove block_cb from driver_list before freeing [ Upstream commit da94a7781fc3c92e7df7832bc2746f4d39bc624e ] Error handler of tcf_block_bind() frees the whole bo->cb_list on error. However, by that time the flow_block_cb instances are already in the driver list because driver ndo_setup_tc() callback is called before that up the call chain in tcf_block_offload_cmd(). This leaves dangling pointers to freed objects in the list and causes use-after-free[0]. Fix it by also removing flow_block_cb instances from driver_list before deallocating them. [0]: [ 279.868433] ================================================================== [ 279.869964] BUG: KASAN: slab-use-after-free in flow_block_cb_setup_simple+0x631/0x7c0 [ 279.871527] Read of size 8 at addr ffff888147e2bf20 by task tc/2963 [ 279.873151] CPU: 6 PID: 2963 Comm: tc Not tainted 6.3.0-rc6+ #4 [ 279.874273] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 279.876295] Call Trace: [ 279.876882] [ 279.877413] dump_stack_lvl+0x33/0x50 [ 279.878198] print_report+0xc2/0x610 [ 279.878987] ? flow_block_cb_setup_simple+0x631/0x7c0 [ 279.879994] kasan_report+0xae/0xe0 [ 279.880750] ? flow_block_cb_setup_simple+0x631/0x7c0 [ 279.881744] ? mlx5e_tc_reoffload_flows_work+0x240/0x240 [mlx5_core] [ 279.883047] flow_block_cb_setup_simple+0x631/0x7c0 [ 279.884027] tcf_block_offload_cmd.isra.0+0x189/0x2d0 [ 279.885037] ? tcf_block_setup+0x6b0/0x6b0 [ 279.885901] ? mutex_lock+0x7d/0xd0 [ 279.886669] ? __mutex_unlock_slowpath.constprop.0+0x2d0/0x2d0 [ 279.887844] ? ingress_init+0x1c0/0x1c0 [sch_ingress] [ 279.888846] tcf_block_get_ext+0x61c/0x1200 [ 279.889711] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.890682] ? clsact_init+0x2b0/0x2b0 [sch_ingress] [ 279.891701] qdisc_create+0x401/0xea0 [ 279.892485] ? qdisc_tree_reduce_backlog+0x470/0x470 [ 279.893473] tc_modify_qdisc+0x6f7/0x16d0 [ 279.894344] ? tc_get_qdisc+0xac0/0xac0 [ 279.895213] ? mutex_lock+0x7d/0xd0 [ 279.896005] ? __mutex_lock_slowpath+0x10/0x10 [ 279.896910] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.897770] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 279.898672] ? __sys_sendmsg+0xb5/0x140 [ 279.899494] ? do_syscall_64+0x3d/0x90 [ 279.900302] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.901337] ? kasan_save_stack+0x2e/0x40 [ 279.902177] ? kasan_save_stack+0x1e/0x40 [ 279.903058] ? kasan_set_track+0x21/0x30 [ 279.903913] ? kasan_save_free_info+0x2a/0x40 [ 279.904836] ? ____kasan_slab_free+0x11a/0x1b0 [ 279.905741] ? kmem_cache_free+0x179/0x400 [ 279.906599] netlink_rcv_skb+0x12c/0x360 [ 279.907450] ? rtnl_calcit.isra.0+0x2b0/0x2b0 [ 279.908360] ? netlink_ack+0x1550/0x1550 [ 279.909192] ? rhashtable_walk_peek+0x170/0x170 [ 279.910135] ? kmem_cache_alloc_node+0x1af/0x390 [ 279.911086] ? _copy_from_iter+0x3d6/0xc70 [ 279.912031] netlink_unicast+0x553/0x790 [ 279.912864] ? netlink_attachskb+0x6a0/0x6a0 [ 279.913763] ? netlink_recvmsg+0x416/0xb50 [ 279.914627] netlink_sendmsg+0x7a1/0xcb0 [ 279.915473] ? netlink_unicast+0x790/0x790 [ 279.916334] ? iovec_from_user.part.0+0x4d/0x220 [ 279.917293] ? netlink_unicast+0x790/0x790 [ 279.918159] sock_sendmsg+0xc5/0x190 [ 279.918938] ____sys_sendmsg+0x535/0x6b0 [ 279.919813] ? import_iovec+0x7/0x10 [ 279.920601] ? kernel_sendmsg+0x30/0x30 [ 279.921423] ? __copy_msghdr+0x3c0/0x3c0 [ 279.922254] ? import_iovec+0x7/0x10 [ 279.923041] ___sys_sendmsg+0xeb/0x170 [ 279.923854] ? copy_msghdr_from_user+0x110/0x110 [ 279.924797] ? ___sys_recvmsg+0xd9/0x130 [ 279.925630] ? __perf_event_task_sched_in+0x183/0x470 [ 279.926656] ? ___sys_sendmsg+0x170/0x170 [ 279.927529] ? ctx_sched_in+0x530/0x530 [ 279.928369] ? update_curr+0x283/0x4f0 [ 279.929185] ? perf_event_update_userpage+0x570/0x570 [ 279.930201] ? __fget_light+0x57/0x520 [ 279.931023] ? __switch_to+0x53d/0xe70 [ 279.931846] ? sockfd_lookup_light+0x1a/0x140 [ 279.932761] __sys_sendmsg+0xb5/0x140 [ 279.933560] ? __sys_sendmsg_sock+0x20/0x20 [ 279.934436] ? fpregs_assert_state_consistent+0x1d/0xa0 [ 279.935490] do_syscall_64+0x3d/0x90 [ 279.936300] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.937311] RIP: 0033:0x7f21c814f887 [ 279.938085] Code: 0a 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b9 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 [ 279.941448] RSP: 002b:00007fff11efd478 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 279.942964] RAX: ffffffffffffffda RBX: 0000000064401979 RCX: 00007f21c814f887 [ 279.944337] RDX: 0000000000000000 RSI: 00007fff11efd4e0 RDI: 0000000000000003 [ 279.945660] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 279.947003] R10: 00007f21c8008708 R11: 0000000000000246 R12: 0000000000000001 [ 279.948345] R13: 0000000000409980 R14: 000000000047e538 R15: 0000000000485400 [ 279.949690] [ 279.950706] Allocated by task 2960: [ 279.951471] kasan_save_stack+0x1e/0x40 [ 279.952338] kasan_set_track+0x21/0x30 [ 279.953165] __kasan_kmalloc+0x77/0x90 [ 279.954006] flow_block_cb_setup_simple+0x3dd/0x7c0 [ 279.955001] tcf_block_offload_cmd.isra.0+0x189/0x2d0 [ 279.956020] tcf_block_get_ext+0x61c/0x1200 [ 279.956881] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.957873] qdisc_create+0x401/0xea0 [ 279.958656] tc_modify_qdisc+0x6f7/0x16d0 [ 279.959506] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.960392] netlink_rcv_skb+0x12c/0x360 [ 279.961216] netlink_unicast+0x553/0x790 [ 279.962044] netlink_sendmsg+0x7a1/0xcb0 [ 279.962906] sock_sendmsg+0xc5/0x190 [ 279.963702] ____sys_sendmsg+0x535/0x6b0 [ 279.964534] ___sys_sendmsg+0xeb/0x170 [ 279.965343] __sys_sendmsg+0xb5/0x140 [ 279.966132] do_syscall_64+0x3d/0x90 [ 279.966908] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.968407] Freed by task 2960: [ 279.969114] kasan_save_stack+0x1e/0x40 [ 279.969929] kasan_set_track+0x21/0x30 [ 279.970729] kasan_save_free_info+0x2a/0x40 [ 279.971603] ____kasan_slab_free+0x11a/0x1b0 [ 279.972483] __kmem_cache_free+0x14d/0x280 [ 279.973337] tcf_block_setup+0x29d/0x6b0 [ 279.974173] tcf_block_offload_cmd.isra.0+0x226/0x2d0 [ 279.975186] tcf_block_get_ext+0x61c/0x1200 [ 279.976080] ingress_init+0x112/0x1c0 [sch_ingress] [ 279.977065] qdisc_create+0x401/0xea0 [ 279.977857] tc_modify_qdisc+0x6f7/0x16d0 [ 279.978695] rtnetlink_rcv_msg+0x5fe/0x9d0 [ 279.979562] netlink_rcv_skb+0x12c/0x360 [ 279.980388] netlink_unicast+0x553/0x790 [ 279.981214] netlink_sendmsg+0x7a1/0xcb0 [ 279.982043] sock_sendmsg+0xc5/0x190 [ 279.982827] ____sys_sendmsg+0x535/0x6b0 [ 279.983703] ___sys_sendmsg+0xeb/0x170 [ 279.984510] __sys_sendmsg+0xb5/0x140 [ 279.985298] do_syscall_64+0x3d/0x90 [ 279.986076] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 279.987532] The buggy address belongs to the object at ffff888147e2bf00 which belongs to the cache kmalloc-192 of size 192 [ 279.989747] The buggy address is located 32 bytes inside of freed 192-byte region [ffff888147e2bf00, ffff888147e2bfc0) [ 279.992367] The buggy address belongs to the physical page: [ 279.993430] page:00000000550f405c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x147e2a [ 279.995182] head:00000000550f405c order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0 [ 279.996713] anon flags: 0x200000000010200(slab|head|node=0|zone=2) [ 279.997878] raw: 0200000000010200 ffff888100042a00 0000000000000000 dead000000000001 [ 279.999384] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [ 280.000894] page dumped because: kasan: bad access detected [ 280.002386] Memory state around the buggy address: [ 280.003338] ffff888147e2be00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 280.004781] ffff888147e2be80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 280.006224] >ffff888147e2bf00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 280.007700] ^ [ 280.008592] ffff888147e2bf80: fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc [ 280.010035] ffff888147e2c000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 280.011564] ================================================================== Fixes: 59094b1e5094 ("net: sched: use flow block API") Signed-off-by: Vlad Buslov Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/sched/cls_api.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 77a1988d5ddc..49777da9f263 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -1500,6 +1500,7 @@ static int tcf_block_bind(struct tcf_block *block, err_unroll: list_for_each_entry_safe(block_cb, next, &bo->cb_list, list) { + list_del(&block_cb->driver_list); if (i-- > 0) { list_del(&block_cb->list); tcf_block_playback_offloads(block, block_cb->cb, From e80412439030b791048972f59937e8b6bb2385aa Mon Sep 17 00:00:00 2001 From: Cong Wang Date: Wed, 26 Apr 2023 23:00:06 -0700 Subject: [PATCH 218/755] sit: update dev->needed_headroom in ipip6_tunnel_bind_dev() [ Upstream commit c88f8d5cd95fd039cff95d682b8e71100c001df0 ] When a tunnel device is bound with the underlying device, its dev->needed_headroom needs to be updated properly. IPv4 tunnels already do the same in ip_tunnel_bind_dev(). Otherwise we may not have enough header room for skb, especially after commit b17f709a2401 ("gue: TX support for using remote checksum offload option"). Fixes: 32b8a8e59c9c ("sit: add IPv4 over IPv4 support") Reported-by: Palash Oswal Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/ Cc: Kuniyuki Iwashima Cc: Eric Dumazet Signed-off-by: Cong Wang Reviewed-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/ipv6/sit.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 1179608955f5..8d704ea94693 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -1054,12 +1054,13 @@ tx_err: static void ipip6_tunnel_bind_dev(struct net_device *dev) { + struct ip_tunnel *tunnel = netdev_priv(dev); + int t_hlen = tunnel->hlen + sizeof(struct iphdr); struct net_device *tdev = NULL; - struct ip_tunnel *tunnel; + int hlen = LL_MAX_HEADER; const struct iphdr *iph; struct flowi4 fl4; - tunnel = netdev_priv(dev); iph = &tunnel->parms.iph; if (iph->daddr) { @@ -1082,14 +1083,15 @@ static void ipip6_tunnel_bind_dev(struct net_device *dev) tdev = __dev_get_by_index(tunnel->net, tunnel->parms.link); if (tdev && !netif_is_l3_master(tdev)) { - int t_hlen = tunnel->hlen + sizeof(struct iphdr); int mtu; mtu = tdev->mtu - t_hlen; if (mtu < IPV6_MIN_MTU) mtu = IPV6_MIN_MTU; WRITE_ONCE(dev->mtu, mtu); + hlen = tdev->hard_header_len + tdev->needed_headroom; } + dev->needed_headroom = t_hlen + hlen; } static void ipip6_tunnel_update(struct ip_tunnel *t, struct ip_tunnel_parm *p, From 9c1fcb97f98fd76951a82c4f4a3ad776b53bf318 Mon Sep 17 00:00:00 2001 From: Angelo Dureghello Date: Wed, 26 Apr 2023 22:28:15 +0200 Subject: [PATCH 219/755] net: dsa: mv88e6xxx: add mv88e6321 rsvd2cpu [ Upstream commit 6686317855c6997671982d4489ccdd946f644957 ] Add rsvd2cpu capability for mv88e6321 model, to allow proper bpdu processing. Signed-off-by: Angelo Dureghello Fixes: 51c901a775621 ("net: dsa: mv88e6xxx: distinguish Global 2 Rsvd2CPU") Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/dsa/mv88e6xxx/chip.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c index ea32be579e7b..3a8a49b7ec3d 100644 --- a/drivers/net/dsa/mv88e6xxx/chip.c +++ b/drivers/net/dsa/mv88e6xxx/chip.c @@ -3876,6 +3876,7 @@ static const struct mv88e6xxx_ops mv88e6321_ops = { .set_cpu_port = mv88e6095_g1_set_cpu_port, .set_egress_port = mv88e6095_g1_set_egress_port, .watchdog_ops = &mv88e6390_watchdog_ops, + .mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu, .reset = mv88e6352_g1_reset, .vtu_getnext = mv88e6185_g1_vtu_getnext, .vtu_loadpurge = mv88e6185_g1_vtu_loadpurge, From cc5ccfb7c0eef9d26a354620b3f092a58960f52b Mon Sep 17 00:00:00 2001 From: Maxim Korotkov Date: Thu, 19 Jan 2023 13:44:43 +0300 Subject: [PATCH 220/755] writeback: fix call of incorrect macro [ Upstream commit 3e46c89c74f2c38e5337d2cf44b0b551adff1cb4 ] the variable 'history' is of type u16, it may be an error that the hweight32 macro was used for it I guess macro hweight16 should be used Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 2a81490811d0 ("writeback: implement foreign cgroup inode detection") Signed-off-by: Maxim Korotkov Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20230119104443.3002-1-korotkov.maxim.s@gmail.com Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin --- fs/fs-writeback.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 5b3a288e0f14..3ec2c16abece 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -700,7 +700,7 @@ void wbc_detach_inode(struct writeback_control *wbc) * is okay. The main goal is avoiding keeping an inode on * the wrong wb for an extended period of time. */ - if (hweight32(history) > WB_FRN_HIST_THR_SLOTS) + if (hweight16(history) > WB_FRN_HIST_THR_SLOTS) inode_switch_wbs(inode, max_id); } From dfa36eb38020e66ed38c6aa2f7f2bde446b5df83 Mon Sep 17 00:00:00 2001 From: Victor Nogueira Date: Wed, 26 Apr 2023 15:19:40 +0000 Subject: [PATCH 221/755] net/sched: act_mirred: Add carrier check [ Upstream commit 526f28bd0fbdc699cda31426928802650c1528e5 ] There are cases where the device is adminstratively UP, but operationally down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps) who's cable was pulled out, here is its ip link output: 5: ens2f1: mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000 link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff altname enp179s0f1np1 As you can see, it's administratively UP but operationally down. In this case, sending a packet to this port caused a nasty kernel hang (so nasty that we were unable to capture it). Aborting a transmit based on operational status (in addition to administrative status) fixes the issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Acked-by: Jamal Hadi Salim Signed-off-by: Victor Nogueira v1->v2: Add fixes tag v2->v3: Remove blank line between tags + add change log, suggested by Leon Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/sched/act_mirred.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/sched/act_mirred.c b/net/sched/act_mirred.c index b87d2a1ee0b1..e3f28cb03f7e 100644 --- a/net/sched/act_mirred.c +++ b/net/sched/act_mirred.c @@ -244,7 +244,7 @@ static int tcf_mirred_act(struct sk_buff *skb, const struct tc_action *a, goto out; } - if (unlikely(!(dev->flags & IFF_UP))) { + if (unlikely(!(dev->flags & IFF_UP)) || !netif_carrier_ok(dev)) { net_notice_ratelimited("tc mirred to Houston: device %s is down\n", dev->name); goto out; From 4a56f1f6fe9253e8648bbc2597ee162024ddcc6e Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 28 Apr 2023 21:27:54 +0100 Subject: [PATCH 222/755] rxrpc: Fix hard call timeout units [ Upstream commit 0d098d83c5d9e107b2df7f5e11f81492f56d2fe7 ] The hard call timeout is specified in the RXRPC_SET_CALL_TIMEOUT cmsg in seconds, so fix the point at which sendmsg() applies it to the call to convert to jiffies from seconds, not milliseconds. Fixes: a158bdd3247b ("rxrpc: Fix timeout of a call that hasn't yet been granted a channel") Signed-off-by: David Howells cc: Marc Dionne cc: "David S. Miller" cc: Eric Dumazet cc: Jakub Kicinski cc: Paolo Abeni cc: linux-afs@lists.infradead.org cc: netdev@vger.kernel.org cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/rxrpc/sendmsg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c index 1cb90d32d553..3439d14168e8 100644 --- a/net/rxrpc/sendmsg.c +++ b/net/rxrpc/sendmsg.c @@ -738,7 +738,7 @@ int rxrpc_do_sendmsg(struct rxrpc_sock *rx, struct msghdr *msg, size_t len) /* Fall through */ case 1: if (p.call.timeouts.hard > 0) { - j = msecs_to_jiffies(p.call.timeouts.hard); + j = p.call.timeouts.hard * HZ; now = jiffies; j += now; WRITE_ONCE(call->expect_term_by, j); From fbcfa00386e1da570b4c600faffa63c5223cf845 Mon Sep 17 00:00:00 2001 From: Shannon Nelson Date: Tue, 2 May 2023 11:47:40 -0700 Subject: [PATCH 223/755] ionic: remove noise from ethtool rxnfc error msg [ Upstream commit 3711d44fac1f80ea69ecb7315fed05b3812a7401 ] It seems that ethtool is calling into .get_rxnfc more often with ETHTOOL_GRXCLSRLCNT which ionic doesn't know about. We don't need to log a message about it, just return not supported. Fixes: aa3198819bea6 ("ionic: Add RSS support") Signed-off-by: Shannon Nelson Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/pensando/ionic/ionic_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c index b8de3784d976..c53d2271d8ab 100644 --- a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c +++ b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c @@ -573,7 +573,7 @@ static int ionic_get_rxnfc(struct net_device *netdev, info->data = lif->nxqs; break; default: - netdev_err(netdev, "Command parameter %d is not supported\n", + netdev_dbg(netdev, "Command parameter %d is not supported\n", info->cmd); err = -EOPNOTSUPP; } From 5cfe3f910f7c0affc6a71b51411ecc1c15569496 Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Mon, 1 May 2023 13:28:57 -0700 Subject: [PATCH 224/755] af_packet: Don't send zero-byte data in packet_sendmsg_spkt(). [ Upstream commit 6a341729fb31b4c5df9f74f24b4b1c98410c9b87 ] syzkaller reported a warning below [0]. We can reproduce it by sending 0-byte data from the (AF_PACKET, SOCK_PACKET) socket via some devices whose dev->hard_header_len is 0. struct sockaddr_pkt addr = { .spkt_family = AF_PACKET, .spkt_device = "tun0", }; int fd; fd = socket(AF_PACKET, SOCK_PACKET, 0); sendto(fd, NULL, 0, 0, (struct sockaddr *)&addr, sizeof(addr)); We have a similar fix for the (AF_PACKET, SOCK_RAW) socket as commit dc633700f00f ("net/af_packet: check len when min_header_len equals to 0"). Let's add the same test for the SOCK_PACKET socket. [0]: skb_assert_len WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 skb_assert_len include/linux/skbuff.h:2552 [inline] WARNING: CPU: 1 PID: 19945 at include/linux/skbuff.h:2552 __dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159 Modules linked in: CPU: 1 PID: 19945 Comm: syz-executor.0 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_assert_len include/linux/skbuff.h:2552 [inline] RIP: 0010:__dev_queue_xmit+0x1f26/0x31d0 net/core/dev.c:4159 Code: 89 de e8 1d a2 85 fd 84 db 75 21 e8 64 a9 85 fd 48 c7 c6 80 2a 1f 86 48 c7 c7 c0 06 1f 86 c6 05 23 cf 27 04 01 e8 fa ee 56 fd <0f> 0b e8 43 a9 85 fd 0f b6 1d 0f cf 27 04 31 ff 89 de e8 e3 a1 85 RSP: 0018:ffff8880217af6e0 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90001133000 RDX: 0000000000040000 RSI: ffffffff81186922 RDI: 0000000000000001 RBP: ffff8880217af8b0 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff888030045640 R13: ffff8880300456b0 R14: ffff888030045650 R15: ffff888030045718 FS: 00007fc5864da640(0000) GS:ffff88806cd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020005740 CR3: 000000003f856003 CR4: 0000000000770ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: dev_queue_xmit include/linux/netdevice.h:3085 [inline] packet_sendmsg_spkt+0xc4b/0x1230 net/packet/af_packet.c:2066 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x1b4/0x200 net/socket.c:747 ____sys_sendmsg+0x331/0x970 net/socket.c:2503 ___sys_sendmsg+0x11d/0x1c0 net/socket.c:2557 __sys_sendmmsg+0x18c/0x430 net/socket.c:2643 __do_sys_sendmmsg net/socket.c:2672 [inline] __se_sys_sendmmsg net/socket.c:2669 [inline] __x64_sys_sendmmsg+0x9c/0x100 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3c/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fc58791de5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007fc5864d9cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000004bbf80 RCX: 00007fc58791de5d RDX: 0000000000000001 RSI: 0000000020005740 RDI: 0000000000000004 RBP: 00000000004bbf80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007fc58797e530 R15: 0000000000000000 ---[ end trace 0000000000000000 ]--- skb len=0 headroom=16 headlen=0 tailroom=304 mac=(16,0) net=(16,-1) trans=-1 shinfo(txflags=0 nr_frags=0 gso(size=0 type=0 segs=0)) csum(0x0 ip_summed=0 complete_sw=0 valid=0 level=0) hash(0x0 sw=0 l4=0) proto=0x0000 pkttype=0 iif=0 dev name=sit0 feat=0x00000006401d7869 sk family=17 type=10 proto=0 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot Signed-off-by: Kuniyuki Iwashima Reviewed-by: Willem de Bruijn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/packet/af_packet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 13666fe787db..109a848aca15 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1975,7 +1975,7 @@ retry: goto retry; } - if (!dev_validate_header(dev, skb->data, len)) { + if (!dev_validate_header(dev, skb->data, len) || !skb->len) { err = -EINVAL; goto out_unlock; } From 35f2642f4abde0459a7453a2fbf017a29f19d603 Mon Sep 17 00:00:00 2001 From: Chia-I Wu Date: Wed, 26 Apr 2023 15:54:55 -0700 Subject: [PATCH 225/755] drm/amdgpu: add a missing lock for AMDGPU_SCHED MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 2397e3d8d2e120355201a8310b61929f5a8bd2c0 ] mgr->ctx_handles should be protected by mgr->lock. v2: improve commit message v3: add a Fixes tag Signed-off-by: Chia-I Wu Reviewed-by: Christian König Fixes: 52c6a62c64fa ("drm/amdgpu: add interface for editing a foreign process's priority v3") Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c index c799691dfa84..94a503dc08b7 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_sched.c @@ -58,6 +58,7 @@ static int amdgpu_sched_process_priority_override(struct amdgpu_device *adev, { struct fd f = fdget(fd); struct amdgpu_fpriv *fpriv; + struct amdgpu_ctx_mgr *mgr; struct amdgpu_ctx *ctx; uint32_t id; int r; @@ -71,8 +72,11 @@ static int amdgpu_sched_process_priority_override(struct amdgpu_device *adev, return r; } - idr_for_each_entry(&fpriv->ctx_mgr.ctx_handles, ctx, id) + mgr = &fpriv->ctx_mgr; + mutex_lock(&mgr->lock); + idr_for_each_entry(&mgr->ctx_handles, ctx, id) amdgpu_ctx_priority_override(ctx, priority); + mutex_unlock(&mgr->lock); fdput(f); return 0; From 544b0de2d7675cdfa703672793c8d2092876a20b Mon Sep 17 00:00:00 2001 From: Ruliang Lin Date: Thu, 4 May 2023 14:50:53 +0800 Subject: [PATCH 226/755] ALSA: caiaq: input: Add error handling for unsupported input methods in `snd_usb_caiaq_input_init` [ Upstream commit 0d727e1856ef22dd9337199430258cb64cbbc658 ] Smatch complains that: snd_usb_caiaq_input_init() warn: missing error code 'ret' This patch adds a new case to handle the situation where the device does not support any input methods in the `snd_usb_caiaq_input_init` function. It returns an `-EINVAL` error code to indicate that no input methods are supported on the device. Fixes: 523f1dce3743 ("[ALSA] Add Native Instrument usb audio device support") Signed-off-by: Ruliang Lin Reviewed-by: Dongliang Mu Acked-by: Daniel Mack Link: https://lore.kernel.org/r/20230504065054.3309-1-u202112092@hust.edu.cn Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/usb/caiaq/input.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/usb/caiaq/input.c b/sound/usb/caiaq/input.c index 533eb69fe4e6..cd5a8584dbe3 100644 --- a/sound/usb/caiaq/input.c +++ b/sound/usb/caiaq/input.c @@ -804,6 +804,7 @@ int snd_usb_caiaq_input_init(struct snd_usb_caiaqdev *cdev) default: /* no input methods supported on this device */ + ret = -EINVAL; goto exit_free_idev; } From b15637e717ad61c55eed7b01c4a058afe3d688c9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= Date: Wed, 3 May 2023 00:09:46 +0300 Subject: [PATCH 227/755] net: dsa: mt7530: fix corrupt frames using trgmii on 40 MHz XTAL MT7621 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 37c218d8021e36e226add4bab93d071d30fe0704 ] The multi-chip module MT7530 switch with a 40 MHz oscillator on the MT7621AT, MT7621DAT, and MT7621ST SoCs forwards corrupt frames using trgmii. This is caused by the assumption that MT7621 SoCs have got 150 MHz PLL, hence using the ncpo1 value, 0x0780. My testing shows this value works on Unielec U7621-06, Bartel's testing shows it won't work on Hi-Link HLK-MT7621A and Netgear WAC104. All devices tested have got 40 MHz oscillators. Using the value for 125 MHz PLL, 0x0640, works on all boards at hand. The definitions for 125 MHz PLL exist on the Banana Pi BPI-R2 BSP source code whilst 150 MHz PLL don't. Forwarding frames using trgmii on the MCM MT7530 switch with a 25 MHz oscillator on the said MT7621 SoCs works fine because the ncpo1 value defined for it is for 125 MHz PLL. Change the 150 MHz PLL comment to 125 MHz PLL, and use the 125 MHz PLL ncpo1 values for both oscillator frequencies. Link: https://github.com/BPI-SINOVOIP/BPI-R2-bsp/blob/81d24bbce7d99524d0771a8bdb2d6663e4eb4faa/u-boot-mt/drivers/net/rt2880_eth.c#L2195 Fixes: 7ef6f6f8d237 ("net: dsa: mt7530: Add MT7621 TRGMII mode support") Tested-by: Bartel Eerdekens Signed-off-by: Arınç ÜNAL Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/dsa/mt7530.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 2d8382eb9add..baa994b7f78b 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -397,9 +397,9 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, int mode) case PHY_INTERFACE_MODE_TRGMII: trgint = 1; if (priv->id == ID_MT7621) { - /* PLL frequency: 150MHz: 1.2GBit */ + /* PLL frequency: 125MHz: 1.0GBit */ if (xtal == HWTRAP_XTAL_40MHZ) - ncpo1 = 0x0780; + ncpo1 = 0x0640; if (xtal == HWTRAP_XTAL_25MHZ) ncpo1 = 0x0a00; } else { /* PLL frequency: 250MHz: 2.0Gbit */ From 1dc5faf30a6c2c75310d849f0605a70dc4c7721b Mon Sep 17 00:00:00 2001 From: Xuan Zhuo Date: Mon, 1 Aug 2022 14:38:59 +0800 Subject: [PATCH 228/755] virtio_net: split free_unused_bufs() [ Upstream commit 6e345f8c7cd029ad3aaece15ad4425ac26e4eb63 ] This patch separates two functions for freeing sq buf and rq buf from free_unused_bufs(). When supporting the enable/disable tx/rq queue in the future, it is necessary to support separate recovery of a sq buf or a rq buf. Signed-off-by: Xuan Zhuo Acked-by: Jason Wang Message-Id: <20220801063902.129329-40-xuanzhuo@linux.alibaba.com> Signed-off-by: Michael S. Tsirkin Stable-dep-of: f8bb51043945 ("virtio_net: suppress cpu stall when free_unused_bufs") Signed-off-by: Sasha Levin --- drivers/net/virtio_net.c | 41 ++++++++++++++++++++++++---------------- 1 file changed, 25 insertions(+), 16 deletions(-) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 59d4449450ee..b77181f04b11 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2792,6 +2792,27 @@ static void free_receive_page_frags(struct virtnet_info *vi) put_page(vi->rq[i].alloc_frag.page); } +static void virtnet_sq_free_unused_buf(struct virtqueue *vq, void *buf) +{ + if (!is_xdp_frame(buf)) + dev_kfree_skb(buf); + else + xdp_return_frame(ptr_to_xdp(buf)); +} + +static void virtnet_rq_free_unused_buf(struct virtqueue *vq, void *buf) +{ + struct virtnet_info *vi = vq->vdev->priv; + int i = vq2rxq(vq); + + if (vi->mergeable_rx_bufs) + put_page(virt_to_head_page(buf)); + else if (vi->big_packets) + give_pages(&vi->rq[i], buf); + else + put_page(virt_to_head_page(buf)); +} + static void free_unused_bufs(struct virtnet_info *vi) { void *buf; @@ -2799,26 +2820,14 @@ static void free_unused_bufs(struct virtnet_info *vi) for (i = 0; i < vi->max_queue_pairs; i++) { struct virtqueue *vq = vi->sq[i].vq; - while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) { - if (!is_xdp_frame(buf)) - dev_kfree_skb(buf); - else - xdp_return_frame(ptr_to_xdp(buf)); - } + while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) + virtnet_sq_free_unused_buf(vq, buf); } for (i = 0; i < vi->max_queue_pairs; i++) { struct virtqueue *vq = vi->rq[i].vq; - - while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) { - if (vi->mergeable_rx_bufs) { - put_page(virt_to_head_page(buf)); - } else if (vi->big_packets) { - give_pages(&vi->rq[i], buf); - } else { - put_page(virt_to_head_page(buf)); - } - } + while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) + virtnet_rq_free_unused_buf(vq, buf); } } From 62f1ebfe9aac524cc737b430b9ce23801eca9db7 Mon Sep 17 00:00:00 2001 From: Wenliang Wang Date: Thu, 4 May 2023 10:27:06 +0800 Subject: [PATCH 229/755] virtio_net: suppress cpu stall when free_unused_bufs [ Upstream commit f8bb5104394560e29017c25bcade4c6b7aabd108 ] For multi-queue and large ring-size use case, the following error occurred when free_unused_bufs: rcu: INFO: rcu_sched self-detected stall on CPU. Fixes: 986a4f4d452d ("virtio_net: multiqueue support") Signed-off-by: Wenliang Wang Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/virtio_net.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index b77181f04b11..7922e833620e 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -2822,12 +2822,14 @@ static void free_unused_bufs(struct virtnet_info *vi) struct virtqueue *vq = vi->sq[i].vq; while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) virtnet_sq_free_unused_buf(vq, buf); + cond_resched(); } for (i = 0; i < vi->max_queue_pairs; i++) { struct virtqueue *vq = vi->rq[i].vq; while ((buf = virtqueue_detach_unused_buf(vq)) != NULL) virtnet_rq_free_unused_buf(vq, buf); + cond_resched(); } } From ffec80cc6761b0116c13861704cbe5a9791d2a81 Mon Sep 17 00:00:00 2001 From: Kajol Jain Date: Tue, 28 Mar 2023 16:59:08 +0530 Subject: [PATCH 230/755] perf vendor events power9: Remove UTF-8 characters from JSON files [ Upstream commit 5d9df8731c0941f3add30f96745a62586a0c9d52 ] Commit 3c22ba5243040c13 ("perf vendor events powerpc: Update POWER9 events") added and updated power9 PMU JSON events. However some of the JSON events which are part of other.json and pipeline.json files, contains UTF-8 characters in their brief description. Having UTF-8 character could breaks the perf build on some distros. Fix this issue by removing the UTF-8 characters from other.json and pipeline.json files. Result without the fix: [command]# file -i pmu-events/arch/powerpc/power9/* pmu-events/arch/powerpc/power9/cache.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/floating-point.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/frontend.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/marked.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/memory.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/metrics.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/nest_metrics.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/other.json: application/json; charset=utf-8 pmu-events/arch/powerpc/power9/pipeline.json: application/json; charset=utf-8 pmu-events/arch/powerpc/power9/pmc.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/translation.json: application/json; charset=us-ascii [command]# Result with the fix: [command]# file -i pmu-events/arch/powerpc/power9/* pmu-events/arch/powerpc/power9/cache.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/floating-point.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/frontend.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/marked.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/memory.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/metrics.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/nest_metrics.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/other.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/pipeline.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/pmc.json: application/json; charset=us-ascii pmu-events/arch/powerpc/power9/translation.json: application/json; charset=us-ascii [command]# Fixes: 3c22ba5243040c13 ("perf vendor events powerpc: Update POWER9 events") Reported-by: Arnaldo Carvalho de Melo Signed-off-by: Kajol Jain Acked-by: Ian Rogers Tested-by: Arnaldo Carvalho de Melo Cc: Athira Rajeev Cc: Disha Goel Cc: Jiri Olsa Cc: Madhavan Srinivasan Cc: Sukadev Bhattiprolu Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/lkml/ZBxP77deq7ikTxwG@kernel.org/ Link: https://lore.kernel.org/r/20230328112908.113158-1-kjain@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/pmu-events/arch/powerpc/power9/other.json | 4 ++-- tools/perf/pmu-events/arch/powerpc/power9/pipeline.json | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/perf/pmu-events/arch/powerpc/power9/other.json b/tools/perf/pmu-events/arch/powerpc/power9/other.json index 62b864269623..ce75652e9051 100644 --- a/tools/perf/pmu-events/arch/powerpc/power9/other.json +++ b/tools/perf/pmu-events/arch/powerpc/power9/other.json @@ -1417,7 +1417,7 @@ {, "EventCode": "0x45054", "EventName": "PM_FMA_CMPL", - "BriefDescription": "two flops operation completed (fmadd, fnmadd, fmsub, fnmsub) Scalar instructions only. " + "BriefDescription": "two flops operation completed (fmadd, fnmadd, fmsub, fnmsub) Scalar instructions only." }, {, "EventCode": "0x201E8", @@ -2017,7 +2017,7 @@ {, "EventCode": "0xC0BC", "EventName": "PM_LSU_FLUSH_OTHER", - "BriefDescription": "Other LSU flushes including: Sync (sync ack from L2 caused search of LRQ for oldest snooped load, This will either signal a Precise Flush of the oldest snooped loa or a Flush Next PPC); Data Valid Flush Next (several cases of this, one example is store and reload are lined up such that a store-hit-reload scenario exists and the CDF has already launched and has gotten bad/stale data); Bad Data Valid Flush Next (might be a few cases of this, one example is a larxa (D$ hit) return data and dval but can't allocate to LMQ (LMQ full or other reason). Already gave dval but can't watch it for snoop_hit_larx. Need to take the “bad dval” back and flush all younger ops)" + "BriefDescription": "Other LSU flushes including: Sync (sync ack from L2 caused search of LRQ for oldest snooped load, This will either signal a Precise Flush of the oldest snooped loa or a Flush Next PPC); Data Valid Flush Next (several cases of this, one example is store and reload are lined up such that a store-hit-reload scenario exists and the CDF has already launched and has gotten bad/stale data); Bad Data Valid Flush Next (might be a few cases of this, one example is a larxa (D$ hit) return data and dval but can't allocate to LMQ (LMQ full or other reason). Already gave dval but can't watch it for snoop_hit_larx. Need to take the 'bad dval' back and flush all younger ops)" }, {, "EventCode": "0x5094", diff --git a/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json b/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json index b4772f54a271..e2f2ed0a3549 100644 --- a/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json +++ b/tools/perf/pmu-events/arch/powerpc/power9/pipeline.json @@ -442,7 +442,7 @@ {, "EventCode": "0x4D052", "EventName": "PM_2FLOP_CMPL", - "BriefDescription": "DP vector version of fmul, fsub, fcmp, fsel, fabs, fnabs, fres ,fsqrte, fneg " + "BriefDescription": "DP vector version of fmul, fsub, fcmp, fsel, fabs, fnabs, fres ,fsqrte, fneg" }, {, "EventCode": "0x1F142", From 78190a6ebe4e5e1108fbff3666875ed605c6abbd Mon Sep 17 00:00:00 2001 From: Markus Elfring Date: Thu, 13 Apr 2023 14:46:39 +0200 Subject: [PATCH 231/755] perf map: Delete two variable initialisations before null pointer checks in sort__sym_from_cmp() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit c160118a90d4acf335993d8d59b02ae2147a524e ] Addresses of two data structure members were determined before corresponding null pointer checks in the implementation of the function “sort__sym_from_cmp”. Thus avoid the risk for undefined behaviour by removing extra initialisations for the local variables “from_l” and “from_r” (also because they were already reassigned with the same value behind this pointer check). This issue was detected by using the Coccinelle software. Fixes: 1b9e97a2a95e4941 ("perf tools: Fix report -F symbol_from for data without branch info") Signed-off-by: Acked-by: Ian Rogers Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Andi Kleen Cc: German Gomez Cc: Ingo Molnar Cc: Jiri Olsa Cc: Kan Liang Cc: Mark Rutland Cc: Namhyung Kim Link: https://lore.kernel.org/cocci/54a21fea-64e3-de67-82ef-d61b90ffad05@web.de/ Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/util/sort.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c index 4027906fd3e3..baf73ca66a2b 100644 --- a/tools/perf/util/sort.c +++ b/tools/perf/util/sort.c @@ -830,8 +830,7 @@ static int hist_entry__dso_to_filter(struct hist_entry *he, int type, static int64_t sort__sym_from_cmp(struct hist_entry *left, struct hist_entry *right) { - struct addr_map_symbol *from_l = &left->branch_info->from; - struct addr_map_symbol *from_r = &right->branch_info->from; + struct addr_map_symbol *from_l, *from_r; if (!left->branch_info || !right->branch_info) return cmp_null(left->branch_info, right->branch_info); From 96f71f669bee7b46ef40258384d25a127873a2d6 Mon Sep 17 00:00:00 2001 From: Yang Jihong Date: Thu, 27 Apr 2023 01:28:41 +0000 Subject: [PATCH 232/755] perf symbols: Fix return incorrect build_id size in elf_read_build_id() [ Upstream commit 1511e4696acb715a4fe48be89e1e691daec91c0e ] In elf_read_build_id(), if gnu build_id is found, should return the size of the actually copied data. If descsz is greater thanBuild_ID_SIZE, write_buildid data access may occur. Fixes: be96ea8ffa788dcc ("perf symbols: Fix issue with binaries using 16-bytes buildids (v2)") Reported-by: Will Ochowicz Signed-off-by: Yang Jihong Tested-by: Will Ochowicz Acked-by: Adrian Hunter Cc: Alexander Shishkin Cc: Ian Rogers Cc: Ingo Molnar Cc: Jiri Olsa Cc: Leo Yan Cc: Mark Rutland Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Stephane Eranian Link: https://lore.kernel.org/lkml/CWLP265MB49702F7BA3D6D8F13E4B1A719C649@CWLP265MB4970.GBRP265.PROD.OUTLOOK.COM/T/ Link: https://lore.kernel.org/r/20230427012841.231729-1-yangjihong1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/util/symbol-elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/perf/util/symbol-elf.c b/tools/perf/util/symbol-elf.c index 4fef8d6bc225..73f890664be5 100644 --- a/tools/perf/util/symbol-elf.c +++ b/tools/perf/util/symbol-elf.c @@ -546,7 +546,7 @@ static int elf_read_build_id(Elf *elf, void *bf, size_t size) size_t sz = min(size, descsz); memcpy(bf, ptr, sz); memset(bf + sz, 0, size - sz); - err = descsz; + err = sz; break; } } From b232f5e8cf81127aa76bab11e7427a2e3a440949 Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Wed, 12 Apr 2023 11:33:09 +0100 Subject: [PATCH 233/755] btrfs: fix btrfs_prev_leaf() to not return the same key twice commit 6f932d4ef007d6a4ae03badcb749fbb8f49196f6 upstream. A call to btrfs_prev_leaf() may end up returning a path that points to the same item (key) again. This happens if while btrfs_prev_leaf(), after we release the path, a concurrent insertion happens, which moves items off from a sibling into the front of the previous leaf, and an item with the computed previous key does not exists. For example, suppose we have the two following leaves: Leaf A ------------------------------------------------------------- | ... key (300 96 10) key (300 96 15) key (300 96 16) | ------------------------------------------------------------- slot 20 slot 21 slot 22 Leaf B ------------------------------------------------------------- | key (300 96 20) key (300 96 21) key (300 96 22) ... | ------------------------------------------------------------- slot 0 slot 1 slot 2 If we call btrfs_prev_leaf(), from btrfs_previous_item() for example, with a path pointing to leaf B and slot 0 and the following happens: 1) At btrfs_prev_leaf() we compute the previous key to search as: (300 96 19), which is a key that does not exists in the tree; 2) Then we call btrfs_release_path() at btrfs_prev_leaf(); 3) Some other task inserts a key at leaf A, that sorts before the key at slot 20, for example it has an objectid of 299. In order to make room for the new key, the key at slot 22 is moved to the front of leaf B. This happens at push_leaf_right(), called from split_leaf(). After this leaf B now looks like: -------------------------------------------------------------------------------- | key (300 96 16) key (300 96 20) key (300 96 21) key (300 96 22) ... | -------------------------------------------------------------------------------- slot 0 slot 1 slot 2 slot 3 4) At btrfs_prev_leaf() we call btrfs_search_slot() for the computed previous key: (300 96 19). Since the key does not exists, btrfs_search_slot() returns 1 and with a path pointing to leaf B and slot 1, the item with key (300 96 20); 5) This makes btrfs_prev_leaf() return a path that points to slot 1 of leaf B, the same key as before it was called, since the key at slot 0 of leaf B (300 96 16) is less than the computed previous key, which is (300 96 19); 6) As a consequence btrfs_previous_item() returns a path that points again to the item with key (300 96 20). For some users of btrfs_prev_leaf() or btrfs_previous_item() this may not be functional a problem, despite not making sense to return a new path pointing again to the same item/key. However for a caller such as tree-log.c:log_dir_items(), this has a bad consequence, as it can result in not logging some dir index deletions in case the directory is being logged without holding the inode's VFS lock (logging triggered while logging a child inode for example) - for the example scenario above, in case the dir index keys 17, 18 and 19 were deleted in the current transaction. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/ctree.c | 32 +++++++++++++++++++++++++++++++- 1 file changed, 31 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c index 822c615840e8..1420df997485 100644 --- a/fs/btrfs/ctree.c +++ b/fs/btrfs/ctree.c @@ -5138,10 +5138,12 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root, int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path) { struct btrfs_key key; + struct btrfs_key orig_key; struct btrfs_disk_key found_key; int ret; btrfs_item_key_to_cpu(path->nodes[0], &key, 0); + orig_key = key; if (key.offset > 0) { key.offset--; @@ -5158,8 +5160,36 @@ int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path) btrfs_release_path(path); ret = btrfs_search_slot(NULL, root, &key, path, 0, 0); - if (ret < 0) + if (ret <= 0) return ret; + + /* + * Previous key not found. Even if we were at slot 0 of the leaf we had + * before releasing the path and calling btrfs_search_slot(), we now may + * be in a slot pointing to the same original key - this can happen if + * after we released the path, one of more items were moved from a + * sibling leaf into the front of the leaf we had due to an insertion + * (see push_leaf_right()). + * If we hit this case and our slot is > 0 and just decrement the slot + * so that the caller does not process the same key again, which may or + * may not break the caller, depending on its logic. + */ + if (path->slots[0] < btrfs_header_nritems(path->nodes[0])) { + btrfs_item_key(path->nodes[0], &found_key, path->slots[0]); + ret = comp_keys(&found_key, &orig_key); + if (ret == 0) { + if (path->slots[0] > 0) { + path->slots[0]--; + return 0; + } + /* + * At slot 0, same key as before, it means orig_key is + * the lowest, leftmost, key in the tree. We're done. + */ + return 1; + } + } + btrfs_item_key(path->nodes[0], &found_key, 0); ret = comp_keys(&found_key, &key); /* From 1e05bf5e80bb1161b7294c9ce5292b26232ab853 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Tue, 2 May 2023 16:00:06 -0400 Subject: [PATCH 234/755] btrfs: don't free qgroup space unless specified commit d246331b78cbef86237f9c22389205bc9b4e1cc1 upstream. Boris noticed in his simple quotas testing that he was getting a leak with Sweet Tea's change to subvol create that stopped doing a transaction commit. This was just a side effect of that change. In the delayed inode code we have an optimization that will free extra reservations if we think we can pack a dir item into an already modified leaf. Previously this wouldn't be triggered in the subvolume create case because we'd commit the transaction, it was still possible but much harder to trigger. It could actually be triggered if we did a mkdir && subvol create with qgroups enabled. This occurs because in btrfs_insert_delayed_dir_index(), which gets called when we're adding the dir item, we do the following: btrfs_block_rsv_release(fs_info, trans->block_rsv, bytes, NULL); if we're able to skip reserving space. The problem here is that trans->block_rsv points at the temporary block rsv for the subvolume create, which has qgroup reservations in the block rsv. This is a problem because btrfs_block_rsv_release() will do the following: if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) { qgroup_to_release = block_rsv->qgroup_rsv_reserved - block_rsv->qgroup_rsv_size; block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size; } The temporary block rsv just has ->qgroup_rsv_reserved set, ->qgroup_rsv_size == 0. The optimization in btrfs_insert_delayed_dir_index() sets ->qgroup_rsv_reserved = 0. Then later on when we call btrfs_subvolume_release_metadata() which has btrfs_block_rsv_release(fs_info, rsv, (u64)-1, &qgroup_to_release); btrfs_qgroup_convert_reserved_meta(root, qgroup_to_release); qgroup_to_release is set to 0, and we do not convert the reserved metadata space. The problem here is that the block rsv code has been unconditionally messing with ->qgroup_rsv_reserved, because the main place this is used is delalloc, and any time we call btrfs_block_rsv_release() we do it with qgroup_to_release set, and thus do the proper accounting. The subvolume code is the only other code that uses the qgroup reservation stuff, but it's intermingled with the above optimization, and thus was getting its reservation freed out from underneath it and thus leaking the reserved space. The solution is to simply not mess with the qgroup reservations if we don't have qgroup_to_release set. This works with the existing code as anything that messes with the delalloc reservations always have qgroup_to_release set. This fixes the leak that Boris was observing. Reviewed-by: Qu Wenruo CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Josef Bacik Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/block-rsv.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/btrfs/block-rsv.c b/fs/btrfs/block-rsv.c index 343400d49bd1..36ef3228bac8 100644 --- a/fs/btrfs/block-rsv.c +++ b/fs/btrfs/block-rsv.c @@ -29,7 +29,8 @@ static u64 block_rsv_release_bytes(struct btrfs_fs_info *fs_info, } else { num_bytes = 0; } - if (block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) { + if (qgroup_to_release_ret && + block_rsv->qgroup_rsv_reserved >= block_rsv->qgroup_rsv_size) { qgroup_to_release = block_rsv->qgroup_rsv_reserved - block_rsv->qgroup_rsv_size; block_rsv->qgroup_rsv_reserved = block_rsv->qgroup_rsv_size; From 3e2b4bceaaf9816bde3ee85a494365f61208bc68 Mon Sep 17 00:00:00 2001 From: Anastasia Belova Date: Wed, 26 Apr 2023 14:53:23 +0300 Subject: [PATCH 235/755] btrfs: print-tree: parent bytenr must be aligned to sector size commit c87f318e6f47696b4040b58f460d5c17ea0280e6 upstream. Check nodesize to sectorsize in alignment check in print_extent_item. The comment states that and this is correct, similar check is done elsewhere in the functions. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: ea57788eb76d ("btrfs: require only sector size alignment for parent eb bytenr") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Qu Wenruo Signed-off-by: Anastasia Belova Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/print-tree.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c index f4edadf1067f..cec6c283a691 100644 --- a/fs/btrfs/print-tree.c +++ b/fs/btrfs/print-tree.c @@ -109,10 +109,10 @@ static void print_extent_item(struct extent_buffer *eb, int slot, int type) pr_cont("shared data backref parent %llu count %u\n", offset, btrfs_shared_data_ref_count(eb, sref)); /* - * offset is supposed to be a tree block which - * must be aligned to nodesize. + * Offset is supposed to be a tree block which must be + * aligned to sectorsize. */ - if (!IS_ALIGNED(offset, eb->fs_info->nodesize)) + if (!IS_ALIGNED(offset, eb->fs_info->sectorsize)) pr_info( "\t\t\t(parent %llu not aligned to sectorsize %u)\n", offset, eb->fs_info->sectorsize); From 871641c7ebe5fd21939be597db36de1d1b59e977 Mon Sep 17 00:00:00 2001 From: Pawel Witek Date: Fri, 5 May 2023 17:14:59 +0200 Subject: [PATCH 236/755] cifs: fix pcchunk length type in smb2_copychunk_range commit d66cde50c3c868af7abddafce701bb86e4a93039 upstream. Change type of pcchunk->Length from u32 to u64 to match smb2_copychunk_range arguments type. Fixes the problem where performing server-side copy with CIFS_IOC_COPYCHUNK_FILE ioctl resulted in incomplete copy of large files while returning -EINVAL. Fixes: 9bf0c9cd4314 ("CIFS: Fix SMB2/SMB3 Copy offload support (refcopy) for large files") Cc: Signed-off-by: Pawel Witek Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman --- fs/cifs/smb2ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c index a82d757a2341..cd0030533bf7 100644 --- a/fs/cifs/smb2ops.c +++ b/fs/cifs/smb2ops.c @@ -1678,7 +1678,7 @@ smb2_copychunk_range(const unsigned int xid, pcchunk->SourceOffset = cpu_to_le64(src_off); pcchunk->TargetOffset = cpu_to_le64(dest_off); pcchunk->Length = - cpu_to_le32(min_t(u32, len, tcon->max_bytes_chunk)); + cpu_to_le32(min_t(u64, len, tcon->max_bytes_chunk)); /* Request server copy to target from src identified by key */ kfree(retbuf); From 0ccea97abe6d7938b59d713eec0e0e563f86760e Mon Sep 17 00:00:00 2001 From: Andrey Avdeev Date: Sun, 30 Apr 2023 11:01:10 +0300 Subject: [PATCH 237/755] platform/x86: touchscreen_dmi: Add info for the Dexp Ursus KX210i commit 4b65f95c87c35699bc6ad540d6b9dd7f950d0924 upstream. Add touchscreen info for the Dexp Ursus KX210i Signed-off-by: Andrey Avdeev Link: https://lore.kernel.org/r/ZE4gRgzRQCjXFYD0@avdeevavpc Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede Signed-off-by: Hans de Goede Signed-off-by: Greg Kroah-Hartman --- drivers/platform/x86/touchscreen_dmi.c | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c index 61cb1a4a8257..0346bf751537 100644 --- a/drivers/platform/x86/touchscreen_dmi.c +++ b/drivers/platform/x86/touchscreen_dmi.c @@ -232,6 +232,22 @@ static const struct ts_dmi_data dexp_ursus_7w_data = { .properties = dexp_ursus_7w_props, }; +static const struct property_entry dexp_ursus_kx210i_props[] = { + PROPERTY_ENTRY_U32("touchscreen-min-x", 5), + PROPERTY_ENTRY_U32("touchscreen-min-y", 2), + PROPERTY_ENTRY_U32("touchscreen-size-x", 1720), + PROPERTY_ENTRY_U32("touchscreen-size-y", 1137), + PROPERTY_ENTRY_STRING("firmware-name", "gsl1680-dexp-ursus-kx210i.fw"), + PROPERTY_ENTRY_U32("silead,max-fingers", 10), + PROPERTY_ENTRY_BOOL("silead,home-button"), + { } +}; + +static const struct ts_dmi_data dexp_ursus_kx210i_data = { + .acpi_name = "MSSL1680:00", + .properties = dexp_ursus_kx210i_props, +}; + static const struct property_entry digma_citi_e200_props[] = { PROPERTY_ENTRY_U32("touchscreen-size-x", 1980), PROPERTY_ENTRY_U32("touchscreen-size-y", 1500), @@ -773,6 +789,14 @@ static const struct dmi_system_id touchscreen_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "7W"), }, }, + { + /* DEXP Ursus KX210i */ + .driver_data = (void *)&dexp_ursus_kx210i_data, + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "INSYDE Corp."), + DMI_MATCH(DMI_PRODUCT_NAME, "S107I"), + }, + }, { /* Digma Citi E200 */ .driver_data = (void *)&digma_citi_e200_data, From 8fb33166aed888769ea63d6af49515893f8a1f14 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 24 Apr 2023 18:32:19 +0200 Subject: [PATCH 238/755] inotify: Avoid reporting event with invalid wd commit c915d8f5918bea7c3962b09b8884ca128bfd9b0c upstream. When inotify_freeing_mark() races with inotify_handle_inode_event() it can happen that inotify_handle_inode_event() sees that i_mark->wd got already reset to -1 and reports this value to userspace which can confuse the inotify listener. Avoid the problem by validating that wd is sensible (and pretend the mark got removed before the event got generated otherwise). CC: stable@vger.kernel.org Fixes: 7e790dd5fc93 ("inotify: fix error paths in inotify_update_watch") Message-Id: <20230424163219.9250-1-jack@suse.cz> Reported-by: syzbot+4a06d4373fd52f0b2f9c@syzkaller.appspotmail.com Reviewed-by: Amir Goldstein Signed-off-by: Jan Kara Signed-off-by: Greg Kroah-Hartman --- fs/notify/inotify/inotify_fsnotify.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/fs/notify/inotify/inotify_fsnotify.c b/fs/notify/inotify/inotify_fsnotify.c index 589dee962993..a3cbfd38f1f6 100644 --- a/fs/notify/inotify/inotify_fsnotify.c +++ b/fs/notify/inotify/inotify_fsnotify.c @@ -66,7 +66,7 @@ int inotify_handle_event(struct fsnotify_group *group, struct inotify_event_info *event; struct fsnotify_event *fsn_event; int ret; - int len = 0; + int len = 0, wd; int alloc_len = sizeof(struct inotify_event_info); if (WARN_ON(fsnotify_iter_vfsmount_mark(iter_info))) @@ -90,6 +90,13 @@ int inotify_handle_event(struct fsnotify_group *group, i_mark = container_of(inode_mark, struct inotify_inode_mark, fsn_mark); + /* + * We can be racing with mark being detached. Don't report event with + * invalid wd. + */ + wd = READ_ONCE(i_mark->wd); + if (wd == -1) + return 0; /* * Whoever is interested in the event, pays for the allocation. Do not * trigger OOM killer in the target monitoring memcg as it may have @@ -120,7 +127,7 @@ int inotify_handle_event(struct fsnotify_group *group, fsn_event = &event->fse; fsnotify_init_event(fsn_event, (unsigned long)inode); event->mask = mask; - event->wd = i_mark->wd; + event->wd = wd; event->sync_cookie = cookie; event->name_len = len; if (len) From 111b08116dac113add0312b64e772faaef43dfa4 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 5 Mar 2023 20:00:34 -0800 Subject: [PATCH 239/755] sh: math-emu: fix macro redefined warning commit 58a49ad90939386a8682e842c474a0d2c00ec39c upstream. Fix a warning that was reported by the kernel test robot: In file included from ../include/math-emu/soft-fp.h:27, from ../arch/sh/math-emu/math.c:22: ../arch/sh/include/asm/sfp-machine.h:17: warning: "__BYTE_ORDER" redefined 17 | #define __BYTE_ORDER __BIG_ENDIAN In file included from ../arch/sh/math-emu/math.c:21: ../arch/sh/math-emu/sfp-util.h:71: note: this is the location of the previous definition 71 | #define __BYTE_ORDER __LITTLE_ENDIAN Fixes: b929926f01f2 ("sh: define __BIG_ENDIAN for math-emu") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Link: lore.kernel.org/r/202111121827.6v6SXtVv-lkp@intel.com Cc: John Paul Adrian Glaubitz Cc: Yoshinori Sato Cc: Rich Felker Cc: linux-sh@vger.kernel.org Reviewed-by: Geert Uytterhoeven Cc: stable@vger.kernel.org Reviewed-by: John Paul Adrian Glaubitz Link: https://lore.kernel.org/r/20230306040037.20350-5-rdunlap@infradead.org Signed-off-by: John Paul Adrian Glaubitz Signed-off-by: Greg Kroah-Hartman --- arch/sh/math-emu/sfp-util.h | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/sh/math-emu/sfp-util.h b/arch/sh/math-emu/sfp-util.h index 784f541344f3..bda50762b3d3 100644 --- a/arch/sh/math-emu/sfp-util.h +++ b/arch/sh/math-emu/sfp-util.h @@ -67,7 +67,3 @@ } while (0) #define abort() return 0 - -#define __BYTE_ORDER __LITTLE_ENDIAN - - From c9871a47f4ce4e1352d5dc2b1cfcd316e4e32493 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 5 Mar 2023 20:00:33 -0800 Subject: [PATCH 240/755] sh: init: use OF_EARLY_FLATTREE for early init commit 6cba655543c7959f8a6d2979b9d40a6a66b7ed4f upstream. When CONFIG_OF_EARLY_FLATTREE and CONFIG_SH_DEVICE_TREE are not set, SH3 build fails with a call to early_init_dt_scan(), so in arch/sh/kernel/setup.c and arch/sh/kernel/head_32.S, use CONFIG_OF_EARLY_FLATTREE instead of CONFIG_OF_FLATTREE. Fixes this build error: ../arch/sh/kernel/setup.c: In function 'sh_fdt_init': ../arch/sh/kernel/setup.c:262:26: error: implicit declaration of function 'early_init_dt_scan' [-Werror=implicit-function-declaration] 262 | if (!dt_virt || !early_init_dt_scan(dt_virt)) { Fixes: 03767daa1387 ("sh: fix build regression with CONFIG_OF && !CONFIG_OF_FLATTREE") Fixes: eb6b6930a70f ("sh: fix memory corruption of unflattened device tree") Signed-off-by: Randy Dunlap Suggested-by: Rob Herring Cc: Frank Rowand Cc: devicetree@vger.kernel.org Cc: Rich Felker Cc: Yoshinori Sato Cc: Geert Uytterhoeven Cc: John Paul Adrian Glaubitz Cc: linux-sh@vger.kernel.org Cc: stable@vger.kernel.org Reviewed-by: John Paul Adrian Glaubitz Link: https://lore.kernel.org/r/20230306040037.20350-4-rdunlap@infradead.org Signed-off-by: John Paul Adrian Glaubitz Signed-off-by: Greg Kroah-Hartman --- arch/sh/kernel/head_32.S | 6 +++--- arch/sh/kernel/setup.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/sh/kernel/head_32.S b/arch/sh/kernel/head_32.S index 4adbd4ade319..b603b7968b38 100644 --- a/arch/sh/kernel/head_32.S +++ b/arch/sh/kernel/head_32.S @@ -64,7 +64,7 @@ ENTRY(_stext) ldc r0, r6_bank #endif -#ifdef CONFIG_OF_FLATTREE +#ifdef CONFIG_OF_EARLY_FLATTREE mov r4, r12 ! Store device tree blob pointer in r12 #endif @@ -315,7 +315,7 @@ ENTRY(_stext) 10: #endif -#ifdef CONFIG_OF_FLATTREE +#ifdef CONFIG_OF_EARLY_FLATTREE mov.l 8f, r0 ! Make flat device tree available early. jsr @r0 mov r12, r4 @@ -346,7 +346,7 @@ ENTRY(stack_start) 5: .long start_kernel 6: .long cpu_init 7: .long init_thread_union -#if defined(CONFIG_OF_FLATTREE) +#if defined(CONFIG_OF_EARLY_FLATTREE) 8: .long sh_fdt_init #endif diff --git a/arch/sh/kernel/setup.c b/arch/sh/kernel/setup.c index 2c0e0f37a318..c25ee383cb83 100644 --- a/arch/sh/kernel/setup.c +++ b/arch/sh/kernel/setup.c @@ -243,7 +243,7 @@ void __init __weak plat_early_device_setup(void) { } -#ifdef CONFIG_OF_FLATTREE +#ifdef CONFIG_OF_EARLY_FLATTREE void __ref sh_fdt_init(phys_addr_t dt_phys) { static int done = 0; @@ -330,7 +330,7 @@ void __init setup_arch(char **cmdline_p) /* Let earlyprintk output early console messages */ early_platform_driver_probe("earlyprintk", 1, 1); -#ifdef CONFIG_OF_FLATTREE +#ifdef CONFIG_OF_EARLY_FLATTREE #ifdef CONFIG_USE_BUILTIN_DTB unflatten_and_copy_device_tree(); #else From f16bc5111cc6ffe52363f0102c5c63ee63bb640f Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 5 Mar 2023 20:00:32 -0800 Subject: [PATCH 241/755] sh: nmi_debug: fix return value of __setup handler commit d1155e4132de712a9d3066e2667ceaad39a539c5 upstream. __setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings. Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from nmi_debug_setup(). Fixes: 1e1030dccb10 ("sh: nmi_debug support.") Signed-off-by: Randy Dunlap Reported-by: Igor Zhbanov Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: John Paul Adrian Glaubitz Cc: Yoshinori Sato Cc: Rich Felker Cc: linux-sh@vger.kernel.org Cc: stable@vger.kernel.org Reviewed-by: John Paul Adrian Glaubitz Link: https://lore.kernel.org/r/20230306040037.20350-3-rdunlap@infradead.org Signed-off-by: John Paul Adrian Glaubitz Signed-off-by: Greg Kroah-Hartman --- arch/sh/kernel/nmi_debug.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/sh/kernel/nmi_debug.c b/arch/sh/kernel/nmi_debug.c index 11777867c6f5..a212b645b4cf 100644 --- a/arch/sh/kernel/nmi_debug.c +++ b/arch/sh/kernel/nmi_debug.c @@ -49,7 +49,7 @@ static int __init nmi_debug_setup(char *str) register_die_notifier(&nmi_debug_nb); if (*str != '=') - return 0; + return 1; for (p = str + 1; *p; p = sep + 1) { sep = strchr(p, ','); @@ -70,6 +70,6 @@ static int __init nmi_debug_setup(char *str) break; } - return 0; + return 1; } __setup("nmi_debug", nmi_debug_setup); From a1366ecb090587ca52856fdd1ce9fd3c15d04a69 Mon Sep 17 00:00:00 2001 From: Mathieu Poirier Date: Mon, 20 Mar 2023 16:18:22 -0600 Subject: [PATCH 242/755] remoteproc: stm32: Call of_node_put() on iteration error commit ccadca5baf5124a880f2bb50ed1ec265415f025b upstream. Function of_phandle_iterator_next() calls of_node_put() on the last device_node it iterated over, but when the loop exits prematurely it has to be called explicitly. Fixes: 13140de09cc2 ("remoteproc: stm32: add an ST stm32_rproc driver") Cc: stable@vger.kernel.org Signed-off-by: Mathieu Poirier Reviewed-by: Arnaud Pouliquen Link: https://lore.kernel.org/r/20230320221826.2728078-2-mathieu.poirier@linaro.org Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/remoteproc/stm32_rproc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/remoteproc/stm32_rproc.c b/drivers/remoteproc/stm32_rproc.c index 2cf4b2992bfc..041dff62ddff 100644 --- a/drivers/remoteproc/stm32_rproc.c +++ b/drivers/remoteproc/stm32_rproc.c @@ -211,11 +211,13 @@ static int stm32_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) while (of_phandle_iterator_next(&it) == 0) { rmem = of_reserved_mem_lookup(it.node); if (!rmem) { + of_node_put(it.node); dev_err(dev, "unable to acquire memory-region\n"); return -EINVAL; } if (stm32_rproc_pa_to_da(rproc, rmem->base, &da) < 0) { + of_node_put(it.node); dev_err(dev, "memory region not valid %pa\n", &rmem->base); return -EINVAL; @@ -242,8 +244,10 @@ static int stm32_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) it.node->name); } - if (!mem) + if (!mem) { + of_node_put(it.node); return -ENOMEM; + } rproc_add_carveout(rproc, mem); index++; From 823496470790086e7ede20a2141d27cd49093cc9 Mon Sep 17 00:00:00 2001 From: Mathieu Poirier Date: Mon, 20 Mar 2023 16:18:23 -0600 Subject: [PATCH 243/755] remoteproc: st: Call of_node_put() on iteration error commit 8a74918948b40317a5b5bab9739d13dcb5de2784 upstream. Function of_phandle_iterator_next() calls of_node_put() on the last device_node it iterated over, but when the loop exits prematurely it has to be called explicitly. Fixes: 3df52ed7f269 ("remoteproc: st: add reserved memory support") Cc: stable@vger.kernel.org Signed-off-by: Mathieu Poirier Reviewed-by: Arnaud Pouliquen Link: https://lore.kernel.org/r/20230320221826.2728078-3-mathieu.poirier@linaro.org Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- drivers/remoteproc/st_remoteproc.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/remoteproc/st_remoteproc.c b/drivers/remoteproc/st_remoteproc.c index ee13d23b43a9..2ed8f96efe8e 100644 --- a/drivers/remoteproc/st_remoteproc.c +++ b/drivers/remoteproc/st_remoteproc.c @@ -129,6 +129,7 @@ static int st_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) while (of_phandle_iterator_next(&it) == 0) { rmem = of_reserved_mem_lookup(it.node); if (!rmem) { + of_node_put(it.node); dev_err(dev, "unable to acquire memory-region\n"); return -EINVAL; } @@ -150,8 +151,10 @@ static int st_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) it.node->name); } - if (!mem) + if (!mem) { + of_node_put(it.node); return -ENOMEM; + } rproc_add_carveout(rproc, mem); index++; From ad751b896eae73be43329879126fcca737a0894d Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Fri, 17 Feb 2023 16:06:27 +0100 Subject: [PATCH 244/755] ARM: dts: exynos: fix WM8960 clock name in Itop Elite commit 6c950c20da38debf1ed531e0b972bd8b53d1c11f upstream. The WM8960 Linux driver expects the clock to be named "mclk". Otherwise the clock will be ignored and not prepared/enabled by the driver. Cc: Fixes: 339b2fb36a67 ("ARM: dts: exynos: Add TOPEET itop elite based board") Link: https://lore.kernel.org/r/20230217150627.779764-3-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/exynos4412-itop-elite.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/exynos4412-itop-elite.dts b/arch/arm/boot/dts/exynos4412-itop-elite.dts index f6d0a5f5d339..9a2a49420d4d 100644 --- a/arch/arm/boot/dts/exynos4412-itop-elite.dts +++ b/arch/arm/boot/dts/exynos4412-itop-elite.dts @@ -179,7 +179,7 @@ compatible = "wlf,wm8960"; reg = <0x1a>; clocks = <&pmu_system_controller 0>; - clock-names = "MCLK1"; + clock-names = "mclk"; wlf,shared-lrclk; #sound-dai-cells = <0>; }; From dafc5a5c8fdac5a5fd5133d9e095d8e2b1221679 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sun, 12 Feb 2023 19:58:18 +0100 Subject: [PATCH 245/755] ARM: dts: s5pv210: correct MIPI CSIS clock name commit 665b9459bb53b8f19bd1541567e1fe9782c83c4b upstream. The Samsung S5P/Exynos MIPI CSIS bindings and Linux driver expect first clock name to be "csis". Otherwise the driver fails to probe. Fixes: 94ad0f6d9278 ("ARM: dts: Add Device tree for s5pv210 SoC") Cc: Link: https://lore.kernel.org/r/20230212185818.43503-2-krzysztof.kozlowski@linaro.org Signed-off-by: Krzysztof Kozlowski Signed-off-by: Greg Kroah-Hartman --- arch/arm/boot/dts/s5pv210.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi index 61822afa30ab..cd8f6e7a7f7f 100644 --- a/arch/arm/boot/dts/s5pv210.dtsi +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -571,7 +571,7 @@ interrupts = <29>; clocks = <&clocks CLK_CSIS>, <&clocks SCLK_CSIS>; - clock-names = "clk_csis", + clock-names = "csis", "sclk_csis"; bus-width = <4>; status = "disabled"; From 3e77036246123ff710fa2661dcaa12a45284f09b Mon Sep 17 00:00:00 2001 From: Jaegeuk Kim Date: Thu, 6 Apr 2023 11:18:48 -0700 Subject: [PATCH 246/755] f2fs: fix potential corruption when moving a directory commit d94772154e524b329a168678836745d2773a6e02 upstream. F2FS has the same issue in ext4_rename causing crash revealed by xfstests/generic/707. See also commit 0813299c586b ("ext4: Fix possible corruption when moving a directory") CC: stable@vger.kernel.org Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman --- fs/f2fs/namei.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c index ed95c27e9302..9cb2a87247b2 100644 --- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -892,12 +892,20 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, goto out; } + /* + * Copied from ext4_rename: we need to protect against old.inode + * directory getting converted from inline directory format into + * a normal one. + */ + if (S_ISDIR(old_inode->i_mode)) + inode_lock_nested(old_inode, I_MUTEX_NONDIR2); + err = -ENOENT; old_entry = f2fs_find_entry(old_dir, &old_dentry->d_name, &old_page); if (!old_entry) { if (IS_ERR(old_page)) err = PTR_ERR(old_page); - goto out; + goto out_unlock_old; } if (S_ISDIR(old_inode->i_mode)) { @@ -1025,6 +1033,9 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, f2fs_unlock_op(sbi); + if (S_ISDIR(old_inode->i_mode)) + inode_unlock(old_inode); + if (IS_DIRSYNC(old_dir) || IS_DIRSYNC(new_dir)) f2fs_sync_fs(sbi->sb, 1); @@ -1040,6 +1051,9 @@ out_dir: f2fs_put_page(old_dir_page, 0); out_old: f2fs_put_page(old_page, 0); +out_unlock_old: + if (S_ISDIR(old_inode->i_mode)) + inode_unlock(old_inode); out: if (whiteout) iput(whiteout); From c6bb59662432ee710a8bac5ae4af27ae83f558d5 Mon Sep 17 00:00:00 2001 From: James Cowgill Date: Wed, 12 Apr 2023 17:35:07 +0000 Subject: [PATCH 247/755] drm/panel: otm8009a: Set backlight parent to panel device commit ab4f869fba6119997f7630d600049762a2b014fa upstream. This is the logical place to put the backlight device, and it also fixes a kernel crash if the MIPI host is removed. Previously the backlight device would be unregistered twice when this happened - once as a child of the MIPI host through `mipi_dsi_host_unregister`, and once when the panel device is destroyed. Fixes: 12a6cbd4f3f1 ("drm/panel: otm8009a: Use new backlight API") Signed-off-by: James Cowgill Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20230412173450.199592-1-james.cowgill@blaize.com Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/panel/panel-orisetech-otm8009a.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c index c7b48df8869a..3ee265f1755f 100644 --- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c +++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c @@ -460,7 +460,7 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi) ctx->panel.funcs = &otm8009a_drm_funcs; ctx->bl_dev = devm_backlight_device_register(dev, dev_name(dev), - dsi->host->dev, ctx, + dev, ctx, &otm8009a_backlight_ops, NULL); if (IS_ERR(ctx->bl_dev)) { From b1fabc379463b08967e8f006dde4a5ee018979b4 Mon Sep 17 00:00:00 2001 From: Hamza Mahfooz Date: Tue, 2 May 2023 11:59:08 -0400 Subject: [PATCH 248/755] drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini() commit 922a76ba31adf84e72bc947267385be420c689ee upstream. As made mention of in commit 08c677cb0b43 ("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af556104fa ("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it from gmc_v9_0_hw_fini(). Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset") Reviewed-by: Mario Limonciello Signed-off-by: Hamza Mahfooz Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c index 63205de4a565..7a50713268b6 100644 --- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c @@ -1534,7 +1534,6 @@ static int gmc_v9_0_hw_fini(void *handle) return 0; } - amdgpu_irq_put(adev, &adev->gmc.ecc_irq, 0); amdgpu_irq_put(adev, &adev->gmc.vm_fault, 0); return 0; From 625d4112ea25dbad7ddf749fd5c1287ceffb2339 Mon Sep 17 00:00:00 2001 From: Guchun Chen Date: Sat, 6 May 2023 20:06:45 +0800 Subject: [PATCH 249/755] drm/amdgpu/gfx: disable gfx9 cp_ecc_error_irq only when enabling legacy gfx ras commit 4a76680311330aefe5074bed8f06afa354b85c48 upstream. gfx9 cp_ecc_error_irq is only enabled when legacy gfx ras is assert. So in gfx_v9_0_hw_fini, interrupt disablement for cp_ecc_error_irq should be executed under such condition, otherwise, an amdgpu_irq_put calltrace will occur. [ 7283.170322] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.170964] RSP: 0018:ffff9a5fc3967d00 EFLAGS: 00010246 [ 7283.170967] RAX: ffff98d88afd3040 RBX: ffff98d89da20000 RCX: 0000000000000000 [ 7283.170969] RDX: 0000000000000000 RSI: ffff98d89da2bef8 RDI: ffff98d89da20000 [ 7283.170971] RBP: ffff98d89da20000 R08: ffff98d89da2ca18 R09: 0000000000000006 [ 7283.170973] R10: ffffd5764243c008 R11: 0000000000000000 R12: 0000000000001050 [ 7283.170975] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105 [ 7283.170978] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.170981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.170983] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.170986] Call Trace: [ 7283.170988] [ 7283.170989] gfx_v9_0_hw_fini+0x1c/0x6d0 [amdgpu] [ 7283.171655] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.172245] amdgpu_device_suspend+0x103/0x180 [amdgpu] [ 7283.172823] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.173412] pci_pm_freeze+0x54/0xc0 [ 7283.173419] ? __pfx_pci_pm_freeze+0x10/0x10 [ 7283.173425] dpm_run_callback+0x98/0x200 [ 7283.173430] __device_suspend+0x164/0x5f0 v2: drop gfx11 as it's fixed in a different solution by retiring cp_ecc_irq funcs(Hawking) Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Signed-off-by: Guchun Chen Reviewed-by: Tao Zhou Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index 685a2df01d09..762a407a4997 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -3908,7 +3908,8 @@ static int gfx_v9_0_hw_fini(void *handle) { struct amdgpu_device *adev = (struct amdgpu_device *)handle; - amdgpu_irq_put(adev, &adev->gfx.cp_ecc_error_irq, 0); + if (amdgpu_ras_is_supported(adev, AMDGPU_RAS_BLOCK__GFX)) + amdgpu_irq_put(adev, &adev->gfx.cp_ecc_error_irq, 0); amdgpu_irq_put(adev, &adev->gfx.priv_reg_irq, 0); amdgpu_irq_put(adev, &adev->gfx.priv_inst_irq, 0); From 3decf3a750a924362bf4e2680dd3b07242fe56e8 Mon Sep 17 00:00:00 2001 From: Guchun Chen Date: Sat, 6 May 2023 16:52:59 +0800 Subject: [PATCH 250/755] drm/amdgpu: disable sdma ecc irq only when sdma RAS is enabled in suspend commit 8b229ada2669b74fdae06c83fbfda5a5a99fc253 upstream. sdma_v4_0_ip is shared on a few asics, but in sdma_v4_0_hw_fini, driver unconditionally disables ecc_irq which is only enabled on those asics enabling sdma ecc. This will introduce a warning in suspend cycle on those chips with sdma ip v4.0, while without sdma ecc. So this patch correct this. [ 7283.166354] RIP: 0010:amdgpu_irq_put+0x45/0x70 [amdgpu] [ 7283.167001] RSP: 0018:ffff9a5fc3967d08 EFLAGS: 00010246 [ 7283.167019] RAX: ffff98d88afd3770 RBX: 0000000000000001 RCX: 0000000000000000 [ 7283.167023] RDX: 0000000000000000 RSI: ffff98d89da30390 RDI: ffff98d89da20000 [ 7283.167025] RBP: ffff98d89da20000 R08: 0000000000036838 R09: 0000000000000006 [ 7283.167028] R10: ffffd5764243c008 R11: 0000000000000000 R12: ffff98d89da30390 [ 7283.167030] R13: ffff98d89da38978 R14: ffffffff999ae15a R15: ffff98d880130105 [ 7283.167032] FS: 0000000000000000(0000) GS:ffff98d996f00000(0000) knlGS:0000000000000000 [ 7283.167036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 7283.167039] CR2: 00000000f7a9d178 CR3: 00000001c42ea000 CR4: 00000000003506e0 [ 7283.167041] Call Trace: [ 7283.167046] [ 7283.167048] sdma_v4_0_hw_fini+0x38/0xa0 [amdgpu] [ 7283.167704] amdgpu_device_ip_suspend_phase2+0x101/0x1a0 [amdgpu] [ 7283.168296] amdgpu_device_suspend+0x103/0x180 [amdgpu] [ 7283.168875] amdgpu_pmops_freeze+0x21/0x60 [amdgpu] [ 7283.169464] pci_pm_freeze+0x54/0xc0 Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522 Signed-off-by: Guchun Chen Reviewed-by: Tao Zhou Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c index 23de332f3c6e..7ca7a68d588e 100644 --- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c +++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c @@ -1911,9 +1911,11 @@ static int sdma_v4_0_hw_fini(void *handle) if (amdgpu_sriov_vf(adev)) return 0; - for (i = 0; i < adev->sdma.num_instances; i++) { - amdgpu_irq_put(adev, &adev->sdma.ecc_irq, - AMDGPU_SDMA_IRQ_INSTANCE0 + i); + if (amdgpu_ras_is_supported(adev, AMDGPU_RAS_BLOCK__SDMA)) { + for (i = 0; i < adev->sdma.num_instances; i++) { + amdgpu_irq_put(adev, &adev->sdma.ecc_irq, + AMDGPU_SDMA_IRQ_INSTANCE0 + i); + } } sdma_v4_0_ctx_switch_enable(adev, false); From d8b609e66244dd93c0bd0699666c6816b21aec67 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Sun, 9 Apr 2023 09:42:29 -0700 Subject: [PATCH 251/755] HID: wacom: Set a default resolution for older tablets commit 08a46b4190d345544d04ce4fe2e1844b772b8535 upstream. Some older tablets may not report physical maximum for X/Y coordinates. Set a default to prevent undefined resolution. Signed-off-by: Ping Cheng Link: https://lore.kernel.org/r/20230409164229.29777-1-ping.cheng@wacom.com Signed-off-by: Benjamin Tissoires Signed-off-by: Greg Kroah-Hartman --- drivers/hid/wacom_wac.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index aa477a43a312..05989aac9c0c 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1853,6 +1853,7 @@ static void wacom_map_usage(struct input_dev *input, struct hid_usage *usage, int fmax = field->logical_maximum; unsigned int equivalent_usage = wacom_equivalent_usage(usage->hid); int resolution_code = code; + int resolution = hidinput_calc_abs_res(field, resolution_code); if (equivalent_usage == HID_DG_TWIST) { resolution_code = ABS_RZ; @@ -1875,8 +1876,15 @@ static void wacom_map_usage(struct input_dev *input, struct hid_usage *usage, switch (type) { case EV_ABS: input_set_abs_params(input, code, fmin, fmax, fuzz, 0); - input_abs_set_res(input, code, - hidinput_calc_abs_res(field, resolution_code)); + + /* older tablet may miss physical usage */ + if ((code == ABS_X || code == ABS_Y) && !resolution) { + resolution = WACOM_INTUOS_RES; + hid_warn(input, + "Wacom usage (%d) missing resolution \n", + code); + } + input_abs_set_res(input, code, resolution); break; case EV_KEY: input_set_capability(input, EV_KEY, code); From f9e27d4bdb1fe257c1453d02560e3adc3e5b6023 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Fri, 24 Feb 2023 08:26:43 -0800 Subject: [PATCH 252/755] HID: wacom: insert timestamp to packed Bluetooth (BT) events commit 17d793f3ed53080dab6bbeabfc82de890c901001 upstream. To fully utilize the BT polling/refresh rate, a few input events are sent together to reduce event delay. This causes issue to the timestamp generated by input_sync since all the events in the same packet would pretty much have the same timestamp. This patch inserts time interval to the events by averaging the total time used for sending the packet. This decision was mainly based on observing the actual time interval between each BT polling. The interval doesn't seem to be constant, due to the network and system environment. So, using solutions other than averaging doesn't end up with valid timestamps. Signed-off-by: Ping Cheng Reviewed-by: Jason Gerecke Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman --- drivers/hid/wacom_wac.c | 26 ++++++++++++++++++++++++++ drivers/hid/wacom_wac.h | 1 + 2 files changed, 27 insertions(+) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 05989aac9c0c..339bc7f1fced 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1265,6 +1265,9 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) struct input_dev *pen_input = wacom->pen_input; unsigned char *data = wacom->data; + int number_of_valid_frames = 0; + int time_interval = 15000000; + ktime_t time_packet_received = ktime_get(); int i; if (wacom->features.type == INTUOSP2_BT || @@ -1285,12 +1288,30 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) wacom->id[0] |= (wacom->serial[0] >> 32) & 0xFFFFF; } + /* number of valid frames */ for (i = 0; i < pen_frames; i++) { unsigned char *frame = &data[i*pen_frame_len + 1]; bool valid = frame[0] & 0x80; + + if (valid) + number_of_valid_frames++; + } + + if (number_of_valid_frames) { + if (wacom->hid_data.time_delayed) + time_interval = ktime_get() - wacom->hid_data.time_delayed; + time_interval /= number_of_valid_frames; + wacom->hid_data.time_delayed = time_packet_received; + } + + for (i = 0; i < number_of_valid_frames; i++) { + unsigned char *frame = &data[i*pen_frame_len + 1]; + bool valid = frame[0] & 0x80; bool prox = frame[0] & 0x40; bool range = frame[0] & 0x20; bool invert = frame[0] & 0x10; + int frames_number_reversed = number_of_valid_frames - i - 1; + int event_timestamp = time_packet_received - frames_number_reversed * time_interval; if (!valid) continue; @@ -1303,6 +1324,7 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) wacom->tool[0] = 0; wacom->id[0] = 0; wacom->serial[0] = 0; + wacom->hid_data.time_delayed = 0; return; } @@ -1339,6 +1361,7 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) get_unaligned_le16(&frame[11])); } } + if (wacom->tool[0]) { input_report_abs(pen_input, ABS_PRESSURE, get_unaligned_le16(&frame[5])); if (wacom->features.type == INTUOSP2_BT || @@ -1362,6 +1385,9 @@ static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom) wacom->shared->stylus_in_proximity = prox; + /* add timestamp to unpack the frames */ + input_set_timestamp(pen_input, event_timestamp); + input_sync(pen_input); } } diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h index ca172efcf072..88badfbae999 100644 --- a/drivers/hid/wacom_wac.h +++ b/drivers/hid/wacom_wac.h @@ -320,6 +320,7 @@ struct hid_data { int bat_connected; int ps_connected; bool pad_input_event_flag; + int time_delayed; }; struct wacom_remote_data { From 1b90fbc7590124c57a2e590de7fd07eba26606f1 Mon Sep 17 00:00:00 2001 From: Ye Bin Date: Mon, 16 Jan 2023 10:00:15 +0800 Subject: [PATCH 253/755] ext4: fix WARNING in mb_find_extent commit fa08a7b61dff8a4df11ff1e84abfc214b487caf7 upstream. Syzbot found the following issue: EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, O_DIRECT and fast_commit support! EXT4-fs (loop0): orphan cleanup on readonly fs ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5067 at fs/ext4/mballoc.c:1869 mb_find_extent+0x8a1/0xe30 Modules linked in: CPU: 1 PID: 5067 Comm: syz-executor307 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:mb_find_extent+0x8a1/0xe30 fs/ext4/mballoc.c:1869 RSP: 0018:ffffc90003c9e098 EFLAGS: 00010293 RAX: ffffffff82405731 RBX: 0000000000000041 RCX: ffff8880783457c0 RDX: 0000000000000000 RSI: 0000000000000041 RDI: 0000000000000040 RBP: 0000000000000040 R08: ffffffff82405723 R09: ffffed10053c9402 R10: ffffed10053c9402 R11: 1ffff110053c9401 R12: 0000000000000000 R13: ffffc90003c9e538 R14: dffffc0000000000 R15: ffffc90003c9e2cc FS: 0000555556665300(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056312f6796f8 CR3: 0000000022437000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ext4_mb_complex_scan_group+0x353/0x1100 fs/ext4/mballoc.c:2307 ext4_mb_regular_allocator+0x1533/0x3860 fs/ext4/mballoc.c:2735 ext4_mb_new_blocks+0xddf/0x3db0 fs/ext4/mballoc.c:5605 ext4_ext_map_blocks+0x1868/0x6880 fs/ext4/extents.c:4286 ext4_map_blocks+0xa49/0x1cc0 fs/ext4/inode.c:651 ext4_getblk+0x1b9/0x770 fs/ext4/inode.c:864 ext4_bread+0x2a/0x170 fs/ext4/inode.c:920 ext4_quota_write+0x225/0x570 fs/ext4/super.c:7105 write_blk fs/quota/quota_tree.c:64 [inline] get_free_dqblk+0x34a/0x6d0 fs/quota/quota_tree.c:130 do_insert_tree+0x26b/0x1aa0 fs/quota/quota_tree.c:340 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 dq_insert_tree fs/quota/quota_tree.c:401 [inline] qtree_write_dquot+0x3b6/0x530 fs/quota/quota_tree.c:420 v2_write_dquot+0x11b/0x190 fs/quota/quota_v2.c:358 dquot_acquire+0x348/0x670 fs/quota/dquot.c:444 ext4_acquire_dquot+0x2dc/0x400 fs/ext4/super.c:6740 dqget+0x999/0xdc0 fs/quota/dquot.c:914 __dquot_initialize+0x3d0/0xcf0 fs/quota/dquot.c:1492 ext4_process_orphan+0x57/0x2d0 fs/ext4/orphan.c:329 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474 __ext4_fill_super fs/ext4/super.c:5516 [inline] ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644 get_tree_bdev+0x400/0x620 fs/super.c:1282 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Add some debug information: mb_find_extent: mb_find_extent block=41, order=0 needed=64 next=0 ex=0/41/1@3735929054 64 64 7 block_bitmap: ff 3f 0c 00 fc 01 00 00 d2 3d 00 00 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Acctually, blocks per group is 64, but block bitmap indicate at least has 128 blocks. Now, ext4_validate_block_bitmap() didn't check invalid block's bitmap if set. To resolve above issue, add check like fsck "Padding at end of block bitmap is not set". Cc: stable@kernel.org Reported-by: syzbot+68223fe9f6c95ad43bed@syzkaller.appspotmail.com Signed-off-by: Ye Bin Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20230116020015.1506120-1-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/balloc.c | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 031ff3f19018..b68cee75f5c5 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -303,6 +303,22 @@ struct ext4_group_desc * ext4_get_group_desc(struct super_block *sb, return desc; } +static ext4_fsblk_t ext4_valid_block_bitmap_padding(struct super_block *sb, + ext4_group_t block_group, + struct buffer_head *bh) +{ + ext4_grpblk_t next_zero_bit; + unsigned long bitmap_size = sb->s_blocksize * 8; + unsigned int offset = num_clusters_in_group(sb, block_group); + + if (bitmap_size <= offset) + return 0; + + next_zero_bit = ext4_find_next_zero_bit(bh->b_data, bitmap_size, offset); + + return (next_zero_bit < bitmap_size ? next_zero_bit : 0); +} + /* * Return the block number which was discovered to be invalid, or 0 if * the block bitmap is valid. @@ -395,6 +411,15 @@ static int ext4_validate_block_bitmap(struct super_block *sb, EXT4_GROUP_INFO_BBITMAP_CORRUPT); return -EFSCORRUPTED; } + blk = ext4_valid_block_bitmap_padding(sb, block_group, bh); + if (unlikely(blk != 0)) { + ext4_unlock_group(sb, block_group); + ext4_error(sb, "bg %u: block %llu: padding at end of block bitmap is not set", + block_group, blk); + ext4_mark_group_bitmap_corrupted(sb, block_group, + EXT4_GROUP_INFO_BBITMAP_CORRUPT); + return -EFSCORRUPTED; + } set_buffer_verified(bh); verified: ext4_unlock_group(sb, block_group); From 4f4fd982d972a55dee129f7da517b81fa16c408d Mon Sep 17 00:00:00 2001 From: Tudor Ambarus Date: Thu, 4 May 2023 12:15:25 +0000 Subject: [PATCH 254/755] ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum commit 4f04351888a83e595571de672e0a4a8b74f4fb31 upstream. When modifying the block device while it is mounted by the filesystem, syzbot reported the following: BUG: KASAN: slab-out-of-bounds in crc16+0x206/0x280 lib/crc16.c:58 Read of size 1 at addr ffff888075f5c0a8 by task syz-executor.2/15586 CPU: 1 PID: 15586 Comm: syz-executor.2 Not tainted 6.2.0-rc5-syzkaller-00205-gc96618275234 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:306 print_report+0x107/0x1f0 mm/kasan/report.c:417 kasan_report+0xcd/0x100 mm/kasan/report.c:517 crc16+0x206/0x280 lib/crc16.c:58 ext4_group_desc_csum+0x81b/0xb20 fs/ext4/super.c:3187 ext4_group_desc_csum_set+0x195/0x230 fs/ext4/super.c:3210 ext4_mb_clear_bb fs/ext4/mballoc.c:6027 [inline] ext4_free_blocks+0x191a/0x2810 fs/ext4/mballoc.c:6173 ext4_remove_blocks fs/ext4/extents.c:2527 [inline] ext4_ext_rm_leaf fs/ext4/extents.c:2710 [inline] ext4_ext_remove_space+0x24ef/0x46a0 fs/ext4/extents.c:2958 ext4_ext_truncate+0x177/0x220 fs/ext4/extents.c:4416 ext4_truncate+0xa6a/0xea0 fs/ext4/inode.c:4342 ext4_setattr+0x10c8/0x1930 fs/ext4/inode.c:5622 notify_change+0xe50/0x1100 fs/attr.c:482 do_truncate+0x200/0x2f0 fs/open.c:65 handle_truncate fs/namei.c:3216 [inline] do_open fs/namei.c:3561 [inline] path_openat+0x272b/0x2dd0 fs/namei.c:3714 do_filp_open+0x264/0x4f0 fs/namei.c:3741 do_sys_openat2+0x124/0x4e0 fs/open.c:1310 do_sys_open fs/open.c:1326 [inline] __do_sys_creat fs/open.c:1402 [inline] __se_sys_creat fs/open.c:1396 [inline] __x64_sys_creat+0x11f/0x160 fs/open.c:1396 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f72f8a8c0c9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f72f97e3168 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 00007f72f8bac050 RCX: 00007f72f8a8c0c9 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000280 RBP: 00007f72f8ae7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffd165348bf R14: 00007f72f97e3300 R15: 0000000000022000 Replace le16_to_cpu(sbi->s_es->s_desc_size) with sbi->s_desc_size It reduces ext4's compiled text size, and makes the code more efficient (we remove an extra indirect reference and a potential byte swap on big endian systems), and there is no downside. It also avoids the potential KASAN / syzkaller failure, as a bonus. Reported-by: syzbot+fc51227e7100c9294894@syzkaller.appspotmail.com Reported-by: syzbot+8785e41224a3afd04321@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=70d28d11ab14bd7938f3e088365252aa923cff42 Link: https://syzkaller.appspot.com/bug?id=b85721b38583ecc6b5e72ff524c67302abbc30f3 Link: https://lore.kernel.org/all/000000000000ece18705f3b20934@google.com/ Fixes: 717d50e4971b ("Ext4: Uninitialized Block Groups") Cc: stable@vger.kernel.org Signed-off-by: Tudor Ambarus Link: https://lore.kernel.org/r/20230504121525.3275886-1-tudor.ambarus@linaro.org Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/super.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 789a9f6a2ec6..78a04b5aa6e8 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2475,11 +2475,9 @@ static __le16 ext4_group_desc_csum(struct super_block *sb, __u32 block_group, crc = crc16(crc, (__u8 *)gdp, offset); offset += sizeof(gdp->bg_checksum); /* skip checksum */ /* for checksum of struct ext4_group_desc do the rest...*/ - if (ext4_has_feature_64bit(sb) && - offset < le16_to_cpu(sbi->s_es->s_desc_size)) + if (ext4_has_feature_64bit(sb) && offset < sbi->s_desc_size) crc = crc16(crc, (__u8 *)gdp + offset, - le16_to_cpu(sbi->s_es->s_desc_size) - - offset); + sbi->s_desc_size - offset); out: return cpu_to_le16(crc); From 525c802de3f9c16f7d4b439ff948ac81b39ee472 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 4 May 2023 14:55:24 +0200 Subject: [PATCH 255/755] ext4: fix data races when using cached status extents commit 492888df0c7b42fc0843631168b0021bc4caee84 upstream. When using cached extent stored in extent status tree in tree->cache_es another process holding ei->i_es_lock for reading can be racing with us setting new value of tree->cache_es. If the compiler would decide to refetch tree->cache_es at an unfortunate moment, it could result in a bogus in_range() check. Fix the possible race by using READ_ONCE() when using tree->cache_es only under ei->i_es_lock for reading. Cc: stable@kernel.org Reported-by: syzbot+4a03518df1e31b537066@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000d3b33905fa0fd4a6@google.com Suggested-by: Dmitry Vyukov Signed-off-by: Jan Kara Link: https://lore.kernel.org/r/20230504125524.10802-1-jack@suse.cz Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/extents_status.c | 30 +++++++++++++----------------- 1 file changed, 13 insertions(+), 17 deletions(-) diff --git a/fs/ext4/extents_status.c b/fs/ext4/extents_status.c index 9d0bed2e4d05..80b5288cc0e9 100644 --- a/fs/ext4/extents_status.c +++ b/fs/ext4/extents_status.c @@ -269,14 +269,12 @@ static void __es_find_extent_range(struct inode *inode, /* see if the extent has been cached */ es->es_lblk = es->es_len = es->es_pblk = 0; - if (tree->cache_es) { - es1 = tree->cache_es; - if (in_range(lblk, es1->es_lblk, es1->es_len)) { - es_debug("%u cached by [%u/%u) %llu %x\n", - lblk, es1->es_lblk, es1->es_len, - ext4_es_pblock(es1), ext4_es_status(es1)); - goto out; - } + es1 = READ_ONCE(tree->cache_es); + if (es1 && in_range(lblk, es1->es_lblk, es1->es_len)) { + es_debug("%u cached by [%u/%u) %llu %x\n", + lblk, es1->es_lblk, es1->es_len, + ext4_es_pblock(es1), ext4_es_status(es1)); + goto out; } es1 = __es_tree_search(&tree->root, lblk); @@ -295,7 +293,7 @@ out: } if (es1 && matching_fn(es1)) { - tree->cache_es = es1; + WRITE_ONCE(tree->cache_es, es1); es->es_lblk = es1->es_lblk; es->es_len = es1->es_len; es->es_pblk = es1->es_pblk; @@ -916,14 +914,12 @@ int ext4_es_lookup_extent(struct inode *inode, ext4_lblk_t lblk, /* find extent in cache firstly */ es->es_lblk = es->es_len = es->es_pblk = 0; - if (tree->cache_es) { - es1 = tree->cache_es; - if (in_range(lblk, es1->es_lblk, es1->es_len)) { - es_debug("%u cached by [%u/%u)\n", - lblk, es1->es_lblk, es1->es_len); - found = 1; - goto out; - } + es1 = READ_ONCE(tree->cache_es); + if (es1 && in_range(lblk, es1->es_lblk, es1->es_len)) { + es_debug("%u cached by [%u/%u)\n", + lblk, es1->es_lblk, es1->es_len); + found = 1; + goto out; } node = tree->root.rb_node; From 2dda2029067106f0835655a0417f1a5eaf3ba0b0 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 5 May 2023 22:20:29 -0400 Subject: [PATCH 256/755] ext4: improve error recovery code paths in __ext4_remount() commit 4c0b4818b1f636bc96359f7817a2d8bab6370162 upstream. If there are failures while changing the mount options in __ext4_remount(), we need to restore the old mount options. This commit fixes two problem. The first is there is a chance that we will free the old quota file names before a potential failure leading to a use-after-free. The second problem addressed in this commit is if there is a failed read/write to read-only transition, if the quota has already been suspended, we need to renable quota handling. Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230506142419.984260-2-tytso@mit.edu Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/super.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 78a04b5aa6e8..9bbd52508656 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -5605,9 +5605,6 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) } #ifdef CONFIG_QUOTA - /* Release old quota file names */ - for (i = 0; i < EXT4_MAXQUOTAS; i++) - kfree(old_opts.s_qf_names[i]); if (enable_quota) { if (sb_any_quota_suspended(sb)) dquot_resume(sb, -1); @@ -5617,6 +5614,9 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) goto restore_opts; } } + /* Release old quota file names */ + for (i = 0; i < EXT4_MAXQUOTAS; i++) + kfree(old_opts.s_qf_names[i]); #endif if (!test_opt(sb, BLOCK_VALIDITY) && sbi->system_blks) ext4_release_system_zone(sb); @@ -5633,6 +5633,13 @@ static int ext4_remount(struct super_block *sb, int *flags, char *data) return 0; restore_opts: + /* + * If there was a failing r/w to ro transition, we may need to + * re-enable quota + */ + if ((sb->s_flags & SB_RDONLY) && !(old_sb_flags & SB_RDONLY) && + sb_any_quota_suspended(sb)) + dquot_resume(sb, -1); sb->s_flags = old_sb_flags; sbi->s_mount_opt = old_opts.s_mount_opt; sbi->s_mount_opt2 = old_opts.s_mount_opt2; From b4fa4768c9acff77245d672d855d2c88294850b1 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 6 May 2023 21:04:01 -0400 Subject: [PATCH 257/755] ext4: fix deadlock when converting an inline directory in nojournal mode commit f4ce24f54d9cca4f09a395f3eecce20d6bec4663 upstream. In no journal mode, ext4_finish_convert_inline_dir() can self-deadlock by calling ext4_handle_dirty_dirblock() when it already has taken the directory lock. There is a similar self-deadlock in ext4_incvert_inline_data_nolock() for data files which we'll fix at the same time. A simple reproducer demonstrating the problem: mke2fs -Fq -t ext2 -O inline_data -b 4k /dev/vdc 64 mount -t ext4 -o dirsync /dev/vdc /vdc cd /vdc mkdir file0 cd file0 touch file0 touch file1 attr -s BurnSpaceInEA -V abcde . touch supercalifragilisticexpialidocious Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230507021608.1290720-1-tytso@mit.edu Reported-by: syzbot+91dccab7c64e2850a4e5@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=ba84cc80a9491d65416bc7877e1650c87530fe8a Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/inline.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 8b8f7f00b835..99568615bd17 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -1172,6 +1172,7 @@ static int ext4_finish_convert_inline_dir(handle_t *handle, ext4_initialize_dirent_tail(dir_block, inode->i_sb->s_blocksize); set_buffer_uptodate(dir_block); + unlock_buffer(dir_block); err = ext4_handle_dirty_dirblock(handle, inode, dir_block); if (err) return err; @@ -1245,6 +1246,7 @@ static int ext4_convert_inline_data_nolock(handle_t *handle, if (!S_ISDIR(inode->i_mode)) { memcpy(data_bh->b_data, buf, inline_size); set_buffer_uptodate(data_bh); + unlock_buffer(data_bh); error = ext4_handle_dirty_metadata(handle, inode, data_bh); } else { @@ -1252,7 +1254,6 @@ static int ext4_convert_inline_data_nolock(handle_t *handle, buf, inline_size); } - unlock_buffer(data_bh); out_restore: if (error) ext4_restore_inline_data(handle, inode, iloc, buf, inline_size); From 486efbbc9445dca7890a1b86adbccb88b91284b0 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 12 May 2023 15:11:02 -0400 Subject: [PATCH 258/755] ext4: add bounds checking in get_max_inline_xattr_value_size() commit 2220eaf90992c11d888fe771055d4de330385f01 upstream. Normally the extended attributes in the inode body would have been checked when the inode is first opened, but if someone is writing to the block device while the file system is mounted, it's possible for the inode table to get corrupted. Add bounds checking to avoid reading beyond the end of allocated memory if this happens. Reported-by: syzbot+1966db24521e5f6e23f7@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=1966db24521e5f6e23f7 Cc: stable@kernel.org Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/inline.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 99568615bd17..9ad21c4dcb50 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -32,6 +32,7 @@ static int get_max_inline_xattr_value_size(struct inode *inode, struct ext4_xattr_ibody_header *header; struct ext4_xattr_entry *entry; struct ext4_inode *raw_inode; + void *end; int free, min_offs; if (!EXT4_INODE_HAS_XATTR_SPACE(inode)) @@ -55,14 +56,23 @@ static int get_max_inline_xattr_value_size(struct inode *inode, raw_inode = ext4_raw_inode(iloc); header = IHDR(inode, raw_inode); entry = IFIRST(header); + end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size; /* Compute min_offs. */ - for (; !IS_LAST_ENTRY(entry); entry = EXT4_XATTR_NEXT(entry)) { + while (!IS_LAST_ENTRY(entry)) { + void *next = EXT4_XATTR_NEXT(entry); + + if (next >= end) { + EXT4_ERROR_INODE(inode, + "corrupt xattr in inline inode"); + return 0; + } if (!entry->e_value_inum && entry->e_value_size) { size_t offs = le16_to_cpu(entry->e_value_offs); if (offs < min_offs) min_offs = offs; } + entry = next; } free = min_offs - ((void *)entry - (void *)IFIRST(header)) - sizeof(__u32); From d7ff83a71d77b47b80056e3f10b7739d1a8a28bf Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 12 May 2023 15:16:27 -0400 Subject: [PATCH 259/755] ext4: bail out of ext4_xattr_ibody_get() fails for any reason commit 2a534e1d0d1591e951f9ece2fb460b2ff92edabd upstream. In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any reason, it's best if we just fail as opposed to stumbling on, especially if the failure is EFSCORRUPTED. Cc: stable@kernel.org Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/inline.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c index 9ad21c4dcb50..549ceac9099c 100644 --- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -358,7 +358,7 @@ static int ext4_update_inline_data(handle_t *handle, struct inode *inode, error = ext4_xattr_ibody_get(inode, i.name_index, i.name, value, len); - if (error == -ENODATA) + if (error < 0) goto out; BUFFER_TRACE(is.iloc.bh, "get_write_access"); From 185062a21976fbc38f2efd296951b02c4500cf65 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sat, 29 Apr 2023 16:14:46 -0400 Subject: [PATCH 260/755] ext4: remove a BUG_ON in ext4_mb_release_group_pa() commit 463808f237cf73e98a1a45ff7460c2406a150a0b upstream. If a malicious fuzzer overwrites the ext4 superblock while it is mounted such that the s_first_data_block is set to a very large number, the calculation of the block group can underflow, and trigger a BUG_ON check. Change this to be an ext4_warning so that we don't crash the kernel. Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230430154311.579720-3-tytso@mit.edu Reported-by: syzbot+e2efa3efc15a1c9e95c3@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=69b28112e098b070f639efb356393af3ffec4220 Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/mballoc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 3c3166ba4364..caab9781bee7 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3895,7 +3895,11 @@ ext4_mb_release_group_pa(struct ext4_buddy *e4b, trace_ext4_mb_release_group_pa(sb, pa); BUG_ON(pa->pa_deleted == 0); ext4_get_group_no_and_offset(sb, pa->pa_pstart, &group, &bit); - BUG_ON(group != e4b->bd_group && pa->pa_len != 0); + if (unlikely(group != e4b->bd_group && pa->pa_len != 0)) { + ext4_warning(sb, "bad group: expected %u, group %u, pa_start %llu", + e4b->bd_group, group, pa->pa_pstart); + return 0; + } mb_free_blocks(pa->pa_inode, e4b, bit, pa->pa_len); atomic_add(pa->pa_len, &EXT4_SB(sb)->s_mb_discarded); trace_ext4_mballoc_discard(sb, NULL, group, bit, pa->pa_len); From ba04d6af5ac440a6d5a2d35dc1d8e2cb0323550a Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Sun, 30 Apr 2023 03:04:13 -0400 Subject: [PATCH 261/755] ext4: fix invalid free tracking in ext4_xattr_move_to_block() commit b87c7cdf2bed4928b899e1ce91ef0d147017ba45 upstream. In ext4_xattr_move_to_block(), the value of the extended attribute which we need to move to an external block may be allocated by kvmalloc() if the value is stored in an external inode. So at the end of the function the code tried to check if this was the case by testing entry->e_value_inum. However, at this point, the pointer to the xattr entry is no longer valid, because it was removed from the original location where it had been stored. So we could end up calling kvfree() on a pointer which was not allocated by kvmalloc(); or we could also potentially leak memory by not freeing the buffer when it should be freed. Fix this by storing whether it should be freed in a separate variable. Cc: stable@kernel.org Link: https://lore.kernel.org/r/20230430160426.581366-1-tytso@mit.edu Link: https://syzkaller.appspot.com/bug?id=5c2aee8256e30b55ccf57312c16d88417adbd5e1 Link: https://syzkaller.appspot.com/bug?id=41a6b5d4917c0412eb3b3c3c604965bed7d7420b Reported-by: syzbot+64b645917ce07d89bde5@syzkaller.appspotmail.com Reported-by: syzbot+0d042627c4f2ad332195@syzkaller.appspotmail.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman --- fs/ext4/xattr.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/fs/ext4/xattr.c b/fs/ext4/xattr.c index 008d9b897987..498ef733b73c 100644 --- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -2569,6 +2569,7 @@ static int ext4_xattr_move_to_block(handle_t *handle, struct inode *inode, .in_inode = !!entry->e_value_inum, }; struct ext4_xattr_ibody_header *header = IHDR(inode, raw_inode); + int needs_kvfree = 0; int error; is = kzalloc(sizeof(struct ext4_xattr_ibody_find), GFP_NOFS); @@ -2591,7 +2592,7 @@ static int ext4_xattr_move_to_block(handle_t *handle, struct inode *inode, error = -ENOMEM; goto out; } - + needs_kvfree = 1; error = ext4_xattr_inode_get(inode, entry, buffer, value_size); if (error) goto out; @@ -2630,7 +2631,7 @@ static int ext4_xattr_move_to_block(handle_t *handle, struct inode *inode, out: kfree(b_entry_name); - if (entry->e_value_inum && buffer) + if (needs_kvfree && buffer) kvfree(buffer); if (is) brelse(is->iloc.bh); From f2a1071100feed7c20a6ae78269b536eb2a3867a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 11 May 2023 15:32:43 +0300 Subject: [PATCH 262/755] tty: Prevent writing chars during tcsetattr TCSADRAIN/FLUSH MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit If userspace races tcsetattr() with a write, the drained condition might not be guaranteed by the kernel. There is a race window after checking Tx is empty before tty_set_termios() takes termios_rwsem for write. During that race window, more characters can be queued by a racing writer. Any ongoing transmission might produce garbage during HW's ->set_termios() call. The intent of TCSADRAIN/FLUSH seems to be preventing such a character corruption. If those flags are set, take tty's write lock to stop any writer before performing the lower layer Tx empty check and wait for the pending characters to be sent (if any). The initial wait for all-writers-done must be placed outside of tty's write lock to avoid deadlock which makes it impossible to use tty_wait_until_sent(). The write lock is retried if a racing write is detected. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20230317113318.31327-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman (cherry picked from commit 094fb49a2d0d6827c86d2e0840873e6db0c491d2) Signed-off-by: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_io.c | 4 ++-- drivers/tty/tty_ioctl.c | 47 +++++++++++++++++++++++++++++------------ include/linux/tty.h | 2 ++ 3 files changed, 38 insertions(+), 15 deletions(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 37c46c65a65f..bb14bd4f6e55 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -876,13 +876,13 @@ static ssize_t tty_read(struct file *file, char __user *buf, size_t count, return i; } -static void tty_write_unlock(struct tty_struct *tty) +void tty_write_unlock(struct tty_struct *tty) { mutex_unlock(&tty->atomic_write_lock); wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT); } -static int tty_write_lock(struct tty_struct *tty, int ndelay) +int tty_write_lock(struct tty_struct *tty, int ndelay) { if (!mutex_trylock(&tty->atomic_write_lock)) { if (ndelay) diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 9245fffdbceb..5d833f0b412d 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -397,22 +397,43 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) tmp_termios.c_ispeed = tty_termios_input_baud_rate(&tmp_termios); tmp_termios.c_ospeed = tty_termios_baud_rate(&tmp_termios); - ld = tty_ldisc_ref(tty); + if (opt & (TERMIOS_FLUSH|TERMIOS_WAIT)) { +retry_write_wait: + retval = wait_event_interruptible(tty->write_wait, !tty_chars_in_buffer(tty)); + if (retval < 0) + return retval; - if (ld != NULL) { - if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer) - ld->ops->flush_buffer(tty); - tty_ldisc_deref(ld); + if (tty_write_lock(tty, 0) < 0) + goto retry_write_wait; + + /* Racing writer? */ + if (tty_chars_in_buffer(tty)) { + tty_write_unlock(tty); + goto retry_write_wait; + } + + ld = tty_ldisc_ref(tty); + if (ld != NULL) { + if ((opt & TERMIOS_FLUSH) && ld->ops->flush_buffer) + ld->ops->flush_buffer(tty); + tty_ldisc_deref(ld); + } + + if ((opt & TERMIOS_WAIT) && tty->ops->wait_until_sent) { + tty->ops->wait_until_sent(tty, 0); + if (signal_pending(current)) { + tty_write_unlock(tty); + return -ERESTARTSYS; + } + } + + tty_set_termios(tty, &tmp_termios); + + tty_write_unlock(tty); + } else { + tty_set_termios(tty, &tmp_termios); } - if (opt & TERMIOS_WAIT) { - tty_wait_until_sent(tty, 0); - if (signal_pending(current)) - return -ERESTARTSYS; - } - - tty_set_termios(tty, &tmp_termios); - /* FIXME: Arguably if tmp_termios == tty->termios AND the actual requested termios was not tmp_termios then we may want to return an error as no user requested change has diff --git a/include/linux/tty.h b/include/linux/tty.h index eb33d948788c..8be25caa97f6 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -480,6 +480,8 @@ extern void __stop_tty(struct tty_struct *tty); extern void stop_tty(struct tty_struct *tty); extern void __start_tty(struct tty_struct *tty); extern void start_tty(struct tty_struct *tty); +void tty_write_unlock(struct tty_struct *tty); +int tty_write_lock(struct tty_struct *tty, int ndelay); extern int tty_register_driver(struct tty_driver *driver); extern int tty_unregister_driver(struct tty_driver *driver); extern struct device *tty_register_device(struct tty_driver *driver, From 373720b9289cffd62acd1247a54709c97073a0e3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Thu, 11 May 2023 15:32:44 +0300 Subject: [PATCH 263/755] serial: 8250: Fix serial8250_tx_empty() race with DMA Tx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There's a potential race before THRE/TEMT deasserts when DMA Tx is starting up (or the next batch of continuous Tx is being submitted). This can lead to misdetecting Tx empty condition. It is entirely normal for THRE/TEMT to be set for some time after the DMA Tx had been setup in serial8250_tx_dma(). As Tx side is definitely not empty at that point, it seems incorrect for serial8250_tx_empty() claim Tx is empty. Fix the race by also checking in serial8250_tx_empty() whether there's DMA Tx active. Note: This fix only addresses in-kernel race mainly to make using TCSADRAIN/FLUSH robust. Userspace can still cause other races but they seem userspace concurrency control problems. Fixes: 9ee4b83e51f74 ("serial: 8250: Add support for dmaengine") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20230317113318.31327-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman (cherry picked from commit 146a37e05d620cef4ad430e5d1c9c077fe6fa76f) Signed-off-by: Ilpo Järvinen Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.h | 12 ++++++++++++ drivers/tty/serial/8250/8250_port.c | 12 +++++++++--- 2 files changed, 21 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h index 33ad9d6de532..e50af46f8c19 100644 --- a/drivers/tty/serial/8250/8250.h +++ b/drivers/tty/serial/8250/8250.h @@ -305,6 +305,13 @@ extern int serial8250_rx_dma(struct uart_8250_port *); extern void serial8250_rx_dma_flush(struct uart_8250_port *); extern int serial8250_request_dma(struct uart_8250_port *); extern void serial8250_release_dma(struct uart_8250_port *); + +static inline bool serial8250_tx_dma_running(struct uart_8250_port *p) +{ + struct uart_8250_dma *dma = p->dma; + + return dma && dma->tx_running; +} #else static inline int serial8250_tx_dma(struct uart_8250_port *p) { @@ -320,6 +327,11 @@ static inline int serial8250_request_dma(struct uart_8250_port *p) return -1; } static inline void serial8250_release_dma(struct uart_8250_port *p) { } + +static inline bool serial8250_tx_dma_running(struct uart_8250_port *p) +{ + return false; +} #endif static inline int ns16550a_goto_highspeed(struct uart_8250_port *up) diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 3d369481d4db..96ae6c6031d4 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -1922,19 +1922,25 @@ static int serial8250_tx_threshold_handle_irq(struct uart_port *port) static unsigned int serial8250_tx_empty(struct uart_port *port) { struct uart_8250_port *up = up_to_u8250p(port); + unsigned int result = 0; unsigned long flags; unsigned int lsr; serial8250_rpm_get(up); spin_lock_irqsave(&port->lock, flags); - lsr = serial_port_in(port, UART_LSR); - up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + if (!serial8250_tx_dma_running(up)) { + lsr = serial_port_in(port, UART_LSR); + up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS; + + if ((lsr & BOTH_EMPTY) == BOTH_EMPTY) + result = TIOCSER_TEMT; + } spin_unlock_irqrestore(&port->lock, flags); serial8250_rpm_put(up); - return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0; + return result; } unsigned int serial8250_do_get_mctrl(struct uart_port *port) From dde34ef0bc7378ba58fb9e135d2583d2b280dc06 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christoph=20B=C3=B6hmwalder?= Date: Wed, 3 May 2023 14:19:37 +0200 Subject: [PATCH 264/755] drbd: correctly submit flush bio on barrier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 3899d94e3831ee07ea6821c032dc297aec80586a upstream. When we receive a flush command (or "barrier" in DRBD), we currently use a REQ_OP_FLUSH with the REQ_PREFLUSH flag set. The correct way to submit a flush bio is by using a REQ_OP_WRITE without any data, and set the REQ_PREFLUSH flag. Since commit b4a6bb3a67aa ("block: add a sanity check for non-write flush/fua bios"), this triggers a warning in the block layer, but this has been broken for quite some time before that. So use the correct set of flags to actually make the flush happen. Cc: Christoph Hellwig Cc: stable@vger.kernel.org Fixes: f9ff0da56437 ("drbd: allow parallel flushes for multi-volume resources") Reported-by: Thomas Voegtle Signed-off-by: Christoph Böhmwalder Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20230503121937.17232-1-christoph.boehmwalder@linbit.com Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- drivers/block/drbd/drbd_receiver.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/block/drbd/drbd_receiver.c b/drivers/block/drbd/drbd_receiver.c index 2b3103c30857..d94f41a0abbe 100644 --- a/drivers/block/drbd/drbd_receiver.c +++ b/drivers/block/drbd/drbd_receiver.c @@ -1298,7 +1298,7 @@ static void submit_one_flush(struct drbd_device *device, struct issue_flush_cont bio_set_dev(bio, device->ldev->backing_bdev); bio->bi_private = octx; bio->bi_end_io = one_flush_endio; - bio->bi_opf = REQ_OP_FLUSH | REQ_PREFLUSH; + bio->bi_opf = REQ_OP_WRITE | REQ_PREFLUSH; device->flush_jif = jiffies; set_bit(FLUSH_PENDING, &device->flags); From 6a24285f64ea2f668a86752b4a6f46eafebd18c2 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 9 May 2023 12:41:09 +0200 Subject: [PATCH 265/755] PCI: pciehp: Use down_read/write_nested(reset_lock) to fix lockdep errors commit 085a9f43433f30cbe8a1ade62d9d7827c3217f4d upstream. Use down_read_nested() and down_write_nested() when taking the ctrl->reset_lock rw-sem, passing the number of PCIe hotplug controllers in the path to the PCI root bus as lock subclass parameter. This fixes the following false-positive lockdep report when unplugging a Lenovo X1C8 from a Lenovo 2nd gen TB3 dock: pcieport 0000:06:01.0: pciehp: Slot(1): Link Down pcieport 0000:06:01.0: pciehp: Slot(1): Card not present ============================================ WARNING: possible recursive locking detected 5.16.0-rc2+ #621 Not tainted -------------------------------------------- irq/124-pciehp/86 is trying to acquire lock: ffff8e5ac4299ef8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_check_presence+0x23/0x80 but task is already holding lock: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&ctrl->reset_lock); lock(&ctrl->reset_lock); *** DEADLOCK *** May be due to missing lock nesting notation 3 locks held by irq/124-pciehp/86: #0: ffff8e5ac4298af8 (&ctrl->reset_lock){.+.+}-{3:3}, at: pciehp_ist+0xf3/0x180 #1: ffffffffa3b024e8 (pci_rescan_remove_lock){+.+.}-{3:3}, at: pciehp_unconfigure_device+0x31/0x110 #2: ffff8e5ac1ee2248 (&dev->mutex){....}-{3:3}, at: device_release_driver+0x1c/0x40 stack backtrace: CPU: 4 PID: 86 Comm: irq/124-pciehp Not tainted 5.16.0-rc2+ #621 Hardware name: LENOVO 20U90SIT19/20U90SIT19, BIOS N2WET30W (1.20 ) 08/26/2021 Call Trace: dump_stack_lvl+0x59/0x73 __lock_acquire.cold+0xc5/0x2c6 lock_acquire+0xb5/0x2b0 down_read+0x3e/0x50 pciehp_check_presence+0x23/0x80 pciehp_runtime_resume+0x5c/0xa0 device_for_each_child+0x45/0x70 pcie_port_device_runtime_resume+0x20/0x30 pci_pm_runtime_resume+0xa7/0xc0 __rpm_callback+0x41/0x110 rpm_callback+0x59/0x70 rpm_resume+0x512/0x7b0 __pm_runtime_resume+0x4a/0x90 __device_release_driver+0x28/0x240 device_release_driver+0x26/0x40 pci_stop_bus_device+0x68/0x90 pci_stop_bus_device+0x2c/0x90 pci_stop_and_remove_bus_device+0xe/0x20 pciehp_unconfigure_device+0x6c/0x110 pciehp_disable_slot+0x5b/0xe0 pciehp_handle_presence_or_link_change+0xc3/0x2f0 pciehp_ist+0x179/0x180 This lockdep warning is triggered because with Thunderbolt, hotplug ports are nested. When removing multiple devices in a daisy-chain, each hotplug port's reset_lock may be acquired recursively. It's never the same lock, so the lockdep splat is a false positive. Because locks at the same hierarchy level are never acquired recursively, a per-level lockdep class is sufficient to fix the lockdep warning. The choice to use one lockdep subclass per pcie-hotplug controller in the path to the root-bus was made to conserve class keys because their number is limited and the complexity grows quadratically with number of keys according to Documentation/locking/lockdep-design.rst. Link: https://lore.kernel.org/linux-pci/20190402021933.GA2966@mit.edu/ Link: https://lore.kernel.org/linux-pci/de684a28-9038-8fc6-27ca-3f6f2f6400d7@redhat.com/ Link: https://lore.kernel.org/r/20211217141709.379663-1-hdegoede@redhat.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=208855 Reported-by: "Theodore Ts'o" Signed-off-by: Hans de Goede Signed-off-by: Bjorn Helgaas Reviewed-by: Lukas Wunner Cc: stable@vger.kernel.org [lukas: backport to v5.4-stable] Signed-off-by: Lukas Wunner Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/pciehp.h | 3 +++ drivers/pci/hotplug/pciehp_core.c | 2 +- drivers/pci/hotplug/pciehp_hpc.c | 19 +++++++++++++++++-- 3 files changed, 21 insertions(+), 3 deletions(-) diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index aa61d4c219d7..79a713f5dbf4 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -72,6 +72,8 @@ extern int pciehp_poll_time; * @reset_lock: prevents access to the Data Link Layer Link Active bit in the * Link Status register and to the Presence Detect State bit in the Slot * Status register during a slot reset which may cause them to flap + * @depth: Number of additional hotplug ports in the path to the root bus, + * used as lock subclass for @reset_lock * @ist_running: flag to keep user request waiting while IRQ thread is running * @request_result: result of last user request submitted to the IRQ thread * @requester: wait queue to wake up on completion of user request, @@ -102,6 +104,7 @@ struct controller { struct hotplug_slot hotplug_slot; /* hotplug core interface */ struct rw_semaphore reset_lock; + unsigned int depth; unsigned int ist_running; int request_result; wait_queue_head_t requester; diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 312cc45c44c7..f5255045b149 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -165,7 +165,7 @@ static void pciehp_check_presence(struct controller *ctrl) { int occupied; - down_read(&ctrl->reset_lock); + down_read_nested(&ctrl->reset_lock, ctrl->depth); mutex_lock(&ctrl->state_lock); occupied = pciehp_card_present_or_link_active(ctrl); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 13f3bc239c66..651664fe4058 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -674,7 +674,7 @@ static irqreturn_t pciehp_ist(int irq, void *dev_id) * Disable requests have higher priority than Presence Detect Changed * or Data Link Layer State Changed events. */ - down_read(&ctrl->reset_lock); + down_read_nested(&ctrl->reset_lock, ctrl->depth); if (events & DISABLE_SLOT) pciehp_handle_disable_request(ctrl); else if (events & (PCI_EXP_SLTSTA_PDC | PCI_EXP_SLTSTA_DLLSC)) @@ -808,7 +808,7 @@ int pciehp_reset_slot(struct hotplug_slot *hotplug_slot, int probe) if (probe) return 0; - down_write(&ctrl->reset_lock); + down_write_nested(&ctrl->reset_lock, ctrl->depth); if (!ATTN_BUTTN(ctrl)) { ctrl_mask |= PCI_EXP_SLTCTL_PDCE; @@ -864,6 +864,20 @@ static inline void dbg_ctrl(struct controller *ctrl) #define FLAG(x, y) (((x) & (y)) ? '+' : '-') +static inline int pcie_hotplug_depth(struct pci_dev *dev) +{ + struct pci_bus *bus = dev->bus; + int depth = 0; + + while (bus->parent) { + bus = bus->parent; + if (bus->self && bus->self->is_hotplug_bridge) + depth++; + } + + return depth; +} + struct controller *pcie_init(struct pcie_device *dev) { struct controller *ctrl; @@ -877,6 +891,7 @@ struct controller *pcie_init(struct pcie_device *dev) return NULL; ctrl->pcie = dev; + ctrl->depth = pcie_hotplug_depth(dev->port); pcie_capability_read_dword(pdev, PCI_EXP_SLTCAP, &slot_cap); if (pdev->hotplug_user_indicators) From c2c3ffc7989617effd9e3dada296a60c80726839 Mon Sep 17 00:00:00 2001 From: Lukas Wunner Date: Tue, 9 May 2023 12:41:10 +0200 Subject: [PATCH 266/755] PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock commit f5eff5591b8f9c5effd25c92c758a127765f74c1 upstream. In 2013, commits 2e35afaefe64 ("PCI: pciehp: Add reset_slot() method") 608c388122c7 ("PCI: Add slot reset option to pci_dev_reset()") amended PCIe hotplug to mask Presence Detect Changed events during a Secondary Bus Reset. The reset thus no longer causes gratuitous slot bringdown and bringup. However the commits neglected to serialize reset with code paths reading slot registers. For instance, a slot bringup due to an earlier hotplug event may see the Presence Detect State bit cleared during a concurrent Secondary Bus Reset. In 2018, commit 5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset") retrofitted the missing locking. It introduced a reset_lock which serializes a Secondary Bus Reset with other parts of pciehp. Unfortunately the locking turns out to be overzealous: reset_lock is held for the entire enumeration and de-enumeration of hotplugged devices, including driver binding and unbinding. Driver binding and unbinding acquires device_lock while the reset_lock of the ancestral hotplug port is held. A concurrent Secondary Bus Reset acquires the ancestral reset_lock while already holding the device_lock. The asymmetric locking order in the two code paths can lead to AB-BA deadlocks. Michael Haeuptle reports such deadlocks on simultaneous hot-removal and vfio release (the latter implies a Secondary Bus Reset): pciehp_ist() # down_read(reset_lock) pciehp_handle_presence_or_link_change() pciehp_disable_slot() __pciehp_disable_slot() remove_board() pciehp_unconfigure_device() pci_stop_and_remove_bus_device() pci_stop_bus_device() pci_stop_dev() device_release_driver() device_release_driver_internal() __device_driver_lock() # device_lock() SYS_munmap() vfio_device_fops_release() vfio_device_group_close() vfio_device_close() vfio_device_last_close() vfio_pci_core_close_device() vfio_pci_core_disable() # device_lock() __pci_reset_function_locked() pci_reset_bus_function() pci_dev_reset_slot_function() pci_reset_hotplug_slot() pciehp_reset_slot() # down_write(reset_lock) Ian May reports the same deadlock on simultaneous hot-removal and an AER-induced Secondary Bus Reset: aer_recover_work_func() pcie_do_recovery() aer_root_reset() pci_bus_error_reset() pci_slot_reset() pci_slot_lock() # device_lock() pci_reset_hotplug_slot() pciehp_reset_slot() # down_write(reset_lock) Fix by releasing the reset_lock during driver binding and unbinding, thereby splitting and shrinking the critical section. Driver binding and unbinding is protected by the device_lock() and thus serialized with a Secondary Bus Reset. There's no need to additionally protect it with the reset_lock. However, pciehp does not bind and unbind devices directly, but rather invokes PCI core functions which also perform certain enumeration and de-enumeration steps. The reset_lock's purpose is to protect slot registers, not enumeration and de-enumeration of hotplugged devices. That would arguably be the job of the PCI core, not the PCIe hotplug driver. After all, an AER-induced Secondary Bus Reset may as well happen during boot-time enumeration of the PCI hierarchy and there's no locking to prevent that either. Exempting *de-enumeration* from the reset_lock is relatively harmless: A concurrent Secondary Bus Reset may foil config space accesses such as PME interrupt disablement. But if the device is physically gone, those accesses are pointless anyway. If the device is physically present and only logically removed through an Attention Button press or the sysfs "power" attribute, PME interrupts as well as DMA cannot come through because pciehp_unconfigure_device() disables INTx and Bus Master bits. That's still protected by the reset_lock in the present commit. Exempting *enumeration* from the reset_lock also has limited impact: The exempted call to pci_bus_add_device() may perform device accesses through pcibios_bus_add_device() and pci_fixup_device() which are now no longer protected from a concurrent Secondary Bus Reset. Otherwise there should be no impact. In essence, the present commit seeks to fix the AB-BA deadlocks while still retaining a best-effort reset protection for enumeration and de-enumeration of hotplugged devices -- until a general solution is implemented in the PCI core. Link: https://lore.kernel.org/linux-pci/CS1PR8401MB0728FC6FDAB8A35C22BD90EC95F10@CS1PR8401MB0728.NAMPRD84.PROD.OUTLOOK.COM Link: https://lore.kernel.org/linux-pci/20200615143250.438252-1-ian.may@canonical.com Link: https://lore.kernel.org/linux-pci/ce878dab-c0c4-5bd0-a725-9805a075682d@amd.com Link: https://lore.kernel.org/linux-pci/ed831249-384a-6d35-0831-70af191e9bce@huawei.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=215590 Fixes: 5b3f7b7d062b ("PCI: pciehp: Avoid slot access during reset") Link: https://lore.kernel.org/r/fef2b2e9edf245c049a8c5b94743c0f74ff5008a.1681191902.git.lukas@wunner.de Reported-by: Michael Haeuptle Reported-by: Ian May Reported-by: Andrey Grodzovsky Reported-by: Rahul Kumar Reported-by: Jialin Zhang Tested-by: Anatoli Antonovitch Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Cc: stable@vger.kernel.org # v4.19+ Cc: Dan Stein Cc: Ashok Raj Cc: Alex Michon Cc: Xiongfeng Wang Cc: Alex Williamson Cc: Mika Westerberg Cc: Sathyanarayanan Kuppuswamy Signed-off-by: Greg Kroah-Hartman --- drivers/pci/hotplug/pciehp_pci.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c index d17f3bf36f70..ad12515a4a12 100644 --- a/drivers/pci/hotplug/pciehp_pci.c +++ b/drivers/pci/hotplug/pciehp_pci.c @@ -63,7 +63,14 @@ int pciehp_configure_device(struct controller *ctrl) pci_assign_unassigned_bridge_resources(bridge); pcie_bus_configure_settings(parent); + + /* + * Release reset_lock during driver binding + * to avoid AB-BA deadlock with device_lock. + */ + up_read(&ctrl->reset_lock); pci_bus_add_devices(parent); + down_read_nested(&ctrl->reset_lock, ctrl->depth); out: pci_unlock_rescan_remove(); @@ -104,7 +111,15 @@ void pciehp_unconfigure_device(struct controller *ctrl, bool presence) list_for_each_entry_safe_reverse(dev, temp, &parent->devices, bus_list) { pci_dev_get(dev); + + /* + * Release reset_lock during driver unbinding + * to avoid AB-BA deadlock with device_lock. + */ + up_read(&ctrl->reset_lock); pci_stop_and_remove_bus_device(dev); + down_read_nested(&ctrl->reset_lock, ctrl->depth); + /* * Ensure that no new Requests will be generated from * the device. From ddcca7299de3e3a8ee233735ac6d0d4afd0f05fa Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Sun, 14 May 2023 13:41:27 +0900 Subject: [PATCH 267/755] printk: declare printk_deferred_{enter,safe}() in include/linux/printk.h commit 85e3e7fbbb720b9897fba9a99659e31cbd1c082e upstream. [This patch implements subset of original commit 85e3e7fbbb72 ("printk: remove NMI tracking") where commit 1007843a9190 ("mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock") depends on, for commit 3d36424b3b58 ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation") was backported to stable.] All NMI contexts are handled the same as the safe context: store the message and defer printing. There is no need to have special NMI context tracking for this. Using in_nmi() is enough. There are several parts of the kernel that are manually calling into the printk NMI context tracking in order to cause general printk deferred printing: arch/arm/kernel/smp.c arch/powerpc/kexec/crash.c kernel/trace/trace.c For arm/kernel/smp.c and powerpc/kexec/crash.c, provide a new function pair printk_deferred_enter/exit that explicitly achieves the same objective. For ftrace, remove the printk context manipulation completely. It was added in commit 03fc7f9c99c1 ("printk/nmi: Prevent deadlock when accessing the main log buffer in NMI"). The purpose was to enforce storing messages directly into the ring buffer even in NMI context. It really should have only modified the behavior in NMI context. There is no need for a special behavior any longer. All messages are always stored directly now. The console deferring is handled transparently in vprintk(). Signed-off-by: John Ogness [pmladek@suse.com: Remove special handling in ftrace.c completely. Signed-off-by: Petr Mladek Link: https://lore.kernel.org/r/20210715193359.25946-5-john.ogness@linutronix.de [penguin-kernel: Copy only printk_deferred_{enter,safe}() definition ] Signed-off-by: Tetsuo Handa Signed-off-by: Greg Kroah-Hartman --- include/linux/printk.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/include/linux/printk.h b/include/linux/printk.h index 3b5cb66d8bc1..eb2a093ba042 100644 --- a/include/linux/printk.h +++ b/include/linux/printk.h @@ -529,4 +529,23 @@ static inline void print_hex_dump_debug(const char *prefix_str, int prefix_type, #define print_hex_dump_bytes(prefix_str, prefix_type, buf, len) \ print_hex_dump_debug(prefix_str, prefix_type, 16, 1, buf, len, true) +#ifdef CONFIG_PRINTK +extern void __printk_safe_enter(void); +extern void __printk_safe_exit(void); +/* + * The printk_deferred_enter/exit macros are available only as a hack for + * some code paths that need to defer all printk console printing. Interrupts + * must be disabled for the deferred duration. + */ +#define printk_deferred_enter __printk_safe_enter +#define printk_deferred_exit __printk_safe_exit +#else +static inline void printk_deferred_enter(void) +{ +} +static inline void printk_deferred_exit(void) +{ +} +#endif + #endif From e4e88f74eb2fc973936d28e6f048b44a563841fd Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 14 Jul 2020 14:56:25 +0200 Subject: [PATCH 268/755] PM: domains: Restore comment indentation for generic_pm_domain.child_links commit afb0367a80553e795e7ad055299096544454f3f6 upstream. The rename of generic_pm_domain.slave_links to generic_pm_domain.child_links accidentally dropped the TAB to align the member's comment. Re-add the lost TAB to restore indentation. Fixes: 8d87ae48ced2dffd ("PM: domains: Fix up terminology with parent/child") Signed-off-by: Geert Uytterhoeven [ rjw: Minor subject edit ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman --- include/linux/pm_domain.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/pm_domain.h b/include/linux/pm_domain.h index 3dffbfa62708..4476994d40c9 100644 --- a/include/linux/pm_domain.h +++ b/include/linux/pm_domain.h @@ -96,7 +96,7 @@ struct generic_pm_domain { struct dev_pm_domain domain; /* PM domain operations */ struct list_head gpd_list_node; /* Node in the global PM domains list */ struct list_head parent_links; /* Links with PM domain as a parent */ - struct list_head child_links;/* Links with PM domain as a child */ + struct list_head child_links; /* Links with PM domain as a child */ struct list_head dev_list; /* List of devices */ struct dev_power_governor *gov; struct work_struct power_off_work; From a781ea3437a08474844239003b65d8cc6a21baa7 Mon Sep 17 00:00:00 2001 From: Maximilian Luz Date: Mon, 6 Jun 2022 23:13:05 +0200 Subject: [PATCH 269/755] drm/msm: Fix double pm_runtime_disable() call commit ce0db505bc0c51ef5e9ba446c660de7e26f78f29 upstream. Following commit 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}"), any call to adreno_unbind() will disable runtime PM twice, as indicated by the call trees below: adreno_unbind() -> pm_runtime_force_suspend() -> pm_runtime_disable() adreno_unbind() -> gpu->funcs->destroy() [= aNxx_destroy()] -> adreno_gpu_cleanup() -> pm_runtime_disable() Note that pm_runtime_force_suspend() is called right before gpu->funcs->destroy() and both functions are called unconditionally. With recent addition of the eDP AUX bus code, this problem manifests itself when the eDP panel cannot be found yet and probing is deferred. On the first probe attempt, we disable runtime PM twice as described above. This then causes any later probe attempt to fail with [drm:adreno_load_gpu [msm]] *ERROR* Couldn't power up the GPU: -13 preventing the driver from loading. As there seem to be scenarios where the aNxx_destroy() functions are not called from adreno_unbind(), simply removing pm_runtime_disable() from inside adreno_unbind() does not seem to be the proper fix. This is what commit 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}") intended to fix. Therefore, instead check whether runtime PM is still enabled, and only disable it in that case. Fixes: 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}") Signed-off-by: Maximilian Luz Tested-by: Bjorn Andersson Reviewed-by: Rob Clark Link: https://lore.kernel.org/r/20220606211305.189585-1-luzmaximilian@gmail.com Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index b472cbe6adff..c0f3305f6216 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -913,7 +913,8 @@ void adreno_gpu_cleanup(struct adreno_gpu *adreno_gpu) for (i = 0; i < ARRAY_SIZE(adreno_gpu->info->fw); i++) release_firmware(adreno_gpu->fw[i]); - pm_runtime_disable(&priv->gpu_pdev->dev); + if (pm_runtime_enabled(&priv->gpu_pdev->dev)) + pm_runtime_disable(&priv->gpu_pdev->dev); icc_put(gpu->icc_path); From 62ac943eb2a9d655e431b9bc98ff6d7bd51a0e49 Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Thu, 17 Nov 2022 15:06:36 +0800 Subject: [PATCH 270/755] firmware: raspberrypi: fix possible memory leak in rpi_firmware_probe() commit 7b51161696e803fd5f9ad55b20a64c2df313f95c upstream. In rpi_firmware_probe(), if mbox_request_channel() fails, the 'fw' will not be freed through rpi_firmware_delete(), fix this leak by calling kfree() in the error path. Fixes: 1e7c57355a3b ("firmware: raspberrypi: Keep count of all consumers") Signed-off-by: Yang Yingliang Link: https://lore.kernel.org/r/20221117070636.3849773-1-yangyingliang@huawei.com Acked-by: Joel Savitz Signed-off-by: Greg Kroah-Hartman --- drivers/firmware/raspberrypi.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index 6a60b5bde0c9..1a690b2c1e2f 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -261,6 +261,7 @@ static int rpi_firmware_probe(struct platform_device *pdev) int ret = PTR_ERR(fw->chan); if (ret != -EPROBE_DEFER) dev_err(dev, "Failed to get mbox channel: %d\n", ret); + kfree(fw); return ret; } From 65a8b6d129cfcf63a2b8a36a63d275479ba6a217 Mon Sep 17 00:00:00 2001 From: Akhil P Oommen Date: Wed, 21 Dec 2022 20:39:56 +0530 Subject: [PATCH 271/755] drm/msm/adreno: Fix null ptr access in adreno_gpu_cleanup() commit dbeedbcb268d055d8895aceca427f897e12c2b50 upstream. Fix the below kernel panic due to null pointer access: [ 18.504431] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000048 [ 18.513464] Mem abort info: [ 18.516346] ESR = 0x0000000096000005 [ 18.520204] EC = 0x25: DABT (current EL), IL = 32 bits [ 18.525706] SET = 0, FnV = 0 [ 18.528878] EA = 0, S1PTW = 0 [ 18.532117] FSC = 0x05: level 1 translation fault [ 18.537138] Data abort info: [ 18.540110] ISV = 0, ISS = 0x00000005 [ 18.544060] CM = 0, WnR = 0 [ 18.547109] user pgtable: 4k pages, 39-bit VAs, pgdp=0000000112826000 [ 18.553738] [0000000000000048] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 18.562690] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP **Snip** [ 18.696758] Call trace: [ 18.699278] adreno_gpu_cleanup+0x30/0x88 [ 18.703396] a6xx_destroy+0xc0/0x130 [ 18.707066] a6xx_gpu_init+0x308/0x424 [ 18.710921] adreno_bind+0x178/0x288 [ 18.714590] component_bind_all+0xe0/0x214 [ 18.718797] msm_drm_bind+0x1d4/0x614 [ 18.722566] try_to_bring_up_aggregate_device+0x16c/0x1b8 [ 18.728105] __component_add+0xa0/0x158 [ 18.732048] component_add+0x20/0x2c [ 18.735719] adreno_probe+0x40/0xc0 [ 18.739300] platform_probe+0xb4/0xd4 [ 18.743068] really_probe+0xfc/0x284 [ 18.746738] __driver_probe_device+0xc0/0xec [ 18.751129] driver_probe_device+0x48/0x110 [ 18.755421] __device_attach_driver+0xa8/0xd0 [ 18.759900] bus_for_each_drv+0x90/0xdc [ 18.763843] __device_attach+0xfc/0x174 [ 18.767786] device_initial_probe+0x20/0x2c [ 18.772090] bus_probe_device+0x40/0xa0 [ 18.776032] deferred_probe_work_func+0x94/0xd0 [ 18.780686] process_one_work+0x190/0x3d0 [ 18.784805] worker_thread+0x280/0x3d4 [ 18.788659] kthread+0x104/0x1c0 [ 18.791981] ret_from_fork+0x10/0x20 [ 18.795654] Code: f9400408 aa0003f3 aa1f03f4 91142015 (f9402516) [ 18.801913] ---[ end trace 0000000000000000 ]--- [ 18.809039] Kernel panic - not syncing: Oops: Fatal exception Fixes: 17e822f7591f ("drm/msm: fix unbalanced pm_runtime_enable in adreno_gpu_{init, cleanup}") Signed-off-by: Akhil P Oommen Patchwork: https://patchwork.freedesktop.org/patch/515605/ Link: https://lore.kernel.org/r/20221221203925.v2.1.Ib978de92c4bd000b515486aad72e96c2481f84d0@changeid Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/msm/adreno/adreno_gpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/msm/adreno/adreno_gpu.c b/drivers/gpu/drm/msm/adreno/adreno_gpu.c index c0f3305f6216..6f83253a8c58 100644 --- a/drivers/gpu/drm/msm/adreno/adreno_gpu.c +++ b/drivers/gpu/drm/msm/adreno/adreno_gpu.c @@ -907,13 +907,13 @@ int adreno_gpu_init(struct drm_device *drm, struct platform_device *pdev, void adreno_gpu_cleanup(struct adreno_gpu *adreno_gpu) { struct msm_gpu *gpu = &adreno_gpu->base; - struct msm_drm_private *priv = gpu->dev->dev_private; + struct msm_drm_private *priv = gpu->dev ? gpu->dev->dev_private : NULL; unsigned int i; for (i = 0; i < ARRAY_SIZE(adreno_gpu->info->fw); i++) release_firmware(adreno_gpu->fw[i]); - if (pm_runtime_enabled(&priv->gpu_pdev->dev)) + if (priv && pm_runtime_enabled(&priv->gpu_pdev->dev)) pm_runtime_disable(&priv->gpu_pdev->dev); icc_put(gpu->icc_path); From 3f231e30cdeb18d2af68af63e6650bb7f5652450 Mon Sep 17 00:00:00 2001 From: Tian Tao Date: Mon, 15 Mar 2021 19:49:37 +0800 Subject: [PATCH 272/755] drm/exynos: move to use request_irq by IRQF_NO_AUTOEN flag commit a4e5eed2c6a689ef2b6ad8d7ae86665c69039379 upstream. After this patch cbe16f35bee68 genirq: Add IRQF_NO_AUTOEN for request_irq/nmi() is merged. request_irq() after setting IRQ_NOAUTOEN as below irq_set_status_flags(irq, IRQ_NOAUTOEN); request_irq(dev, irq...); can be replaced by request_irq() with IRQF_NO_AUTOEN flag. v2: Fix the problem of using wrong flags Signed-off-by: Tian Tao Signed-off-by: Inki Dae Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 4 ++-- drivers/gpu/drm/exynos/exynos_drm_dsi.c | 7 +++---- 2 files changed, 5 insertions(+), 6 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c index 9c262daf5816..1061430aced2 100644 --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c @@ -775,8 +775,8 @@ static int decon_conf_irq(struct decon_context *ctx, const char *name, return irq; } } - irq_set_status_flags(irq, IRQ_NOAUTOEN); - ret = devm_request_irq(ctx->dev, irq, handler, flags, "drm_decon", ctx); + ret = devm_request_irq(ctx->dev, irq, handler, + flags | IRQF_NO_AUTOEN, "drm_decon", ctx); if (ret < 0) { dev_err(ctx->dev, "IRQ %s request failed\n", name); return ret; diff --git a/drivers/gpu/drm/exynos/exynos_drm_dsi.c b/drivers/gpu/drm/exynos/exynos_drm_dsi.c index babf3db82ce3..bfcbb89ff40a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dsi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dsi.c @@ -1350,10 +1350,9 @@ static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi, } te_gpio_irq = gpio_to_irq(dsi->te_gpio); - irq_set_status_flags(te_gpio_irq, IRQ_NOAUTOEN); ret = request_threaded_irq(te_gpio_irq, exynos_dsi_te_irq_handler, NULL, - IRQF_TRIGGER_RISING, "TE", dsi); + IRQF_TRIGGER_RISING | IRQF_NO_AUTOEN, "TE", dsi); if (ret) { dev_err(dsi->dev, "request interrupt failed with %d\n", ret); gpio_free(dsi->te_gpio); @@ -1792,9 +1791,9 @@ static int exynos_dsi_probe(struct platform_device *pdev) return dsi->irq; } - irq_set_status_flags(dsi->irq, IRQ_NOAUTOEN); ret = devm_request_threaded_irq(dev, dsi->irq, NULL, - exynos_dsi_irq, IRQF_ONESHOT, + exynos_dsi_irq, + IRQF_ONESHOT | IRQF_NO_AUTOEN, dev_name(dev), dsi); if (ret) { dev_err(dev, "failed to request dsi irq\n"); From 93ca0d7b88e87655544b2835d1cd61f2c9d6bc03 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Tue, 4 Apr 2023 23:31:58 +0900 Subject: [PATCH 273/755] mm/page_alloc: fix potential deadlock on zonelist_update_seq seqlock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 1007843a91909a4995ee78a538f62d8665705b66 upstream. syzbot is reporting circular locking dependency which involves zonelist_update_seq seqlock [1], for this lock is checked by memory allocation requests which do not need to be retried. One deadlock scenario is kmalloc(GFP_ATOMIC) from an interrupt handler. CPU0 ---- __build_all_zonelists() { write_seqlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount odd // e.g. timer interrupt handler runs at this moment some_timer_func() { kmalloc(GFP_ATOMIC) { __alloc_pages_slowpath() { read_seqbegin(&zonelist_update_seq) { // spins forever because zonelist_update_seq.seqcount is odd } } } } // e.g. timer interrupt handler finishes write_sequnlock(&zonelist_update_seq); // makes zonelist_update_seq.seqcount even } This deadlock scenario can be easily eliminated by not calling read_seqbegin(&zonelist_update_seq) from !__GFP_DIRECT_RECLAIM allocation requests, for retry is applicable to only __GFP_DIRECT_RECLAIM allocation requests. But Michal Hocko does not know whether we should go with this approach. Another deadlock scenario which syzbot is reporting is a race between kmalloc(GFP_ATOMIC) from tty_insert_flip_string_and_push_buffer() with port->lock held and printk() from __build_all_zonelists() with zonelist_update_seq held. CPU0 CPU1 ---- ---- pty_write() { tty_insert_flip_string_and_push_buffer() { __build_all_zonelists() { write_seqlock(&zonelist_update_seq); build_zonelists() { printk() { vprintk() { vprintk_default() { vprintk_emit() { console_unlock() { console_flush_all() { console_emit_next_record() { con->write() = serial8250_console_write() { spin_lock_irqsave(&port->lock, flags); tty_insert_flip_string() { tty_insert_flip_string_fixed_flag() { __tty_buffer_request_room() { tty_buffer_alloc() { kmalloc(GFP_ATOMIC | __GFP_NOWARN) { __alloc_pages_slowpath() { zonelist_iter_begin() { read_seqbegin(&zonelist_update_seq); // spins forever because zonelist_update_seq.seqcount is odd spin_lock_irqsave(&port->lock, flags); // spins forever because port->lock is held } } } } } } } } spin_unlock_irqrestore(&port->lock, flags); // message is printed to console spin_unlock_irqrestore(&port->lock, flags); } } } } } } } } } write_sequnlock(&zonelist_update_seq); } } } This deadlock scenario can be eliminated by preventing interrupt context from calling kmalloc(GFP_ATOMIC) and preventing printk() from calling console_flush_all() while zonelist_update_seq.seqcount is odd. Since Petr Mladek thinks that __build_all_zonelists() can become a candidate for deferring printk() [2], let's address this problem by disabling local interrupts in order to avoid kmalloc(GFP_ATOMIC) and disabling synchronous printk() in order to avoid console_flush_all() . As a side effect of minimizing duration of zonelist_update_seq.seqcount being odd by disabling synchronous printk(), latency at read_seqbegin(&zonelist_update_seq) for both !__GFP_DIRECT_RECLAIM and __GFP_DIRECT_RECLAIM allocation requests will be reduced. Although, from lockdep perspective, not calling read_seqbegin(&zonelist_update_seq) (i.e. do not record unnecessary locking dependency) from interrupt context is still preferable, even if we don't allow calling kmalloc(GFP_ATOMIC) inside write_seqlock(&zonelist_update_seq)/write_sequnlock(&zonelist_update_seq) section... Link: https://lkml.kernel.org/r/8796b95c-3da3-5885-fddd-6ef55f30e4d3@I-love.SAKURA.ne.jp Fixes: 3d36424b3b58 ("mm/page_alloc: fix race condition between build_all_zonelists and page allocation") Link: https://lkml.kernel.org/r/ZCrs+1cDqPWTDFNM@alley [2] Reported-by: syzbot Link: https://syzkaller.appspot.com/bug?extid=223c7461c58c58a4cb10 [1] Signed-off-by: Tetsuo Handa Acked-by: Michal Hocko Acked-by: Mel Gorman Cc: Petr Mladek Cc: David Hildenbrand Cc: Ilpo Järvinen Cc: John Ogness Cc: Patrick Daly Cc: Sergey Senozhatsky Cc: Steven Rostedt Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- mm/page_alloc.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/mm/page_alloc.c b/mm/page_alloc.c index c30a8bac5c13..a3fca320e35a 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5816,7 +5816,21 @@ static void __build_all_zonelists(void *data) int nid; int __maybe_unused cpu; pg_data_t *self = data; + unsigned long flags; + /* + * Explicitly disable this CPU's interrupts before taking seqlock + * to prevent any IRQ handler from calling into the page allocator + * (e.g. GFP_ATOMIC) that could hit zonelist_iter_begin and livelock. + */ + local_irq_save(flags); + /* + * Explicitly disable this CPU's synchronous printk() before taking + * seqlock to prevent any printk() from trying to hold port->lock, for + * tty_insert_flip_string_and_push_buffer() on other CPU might be + * calling kmalloc(GFP_ATOMIC | __GFP_NOWARN) with port->lock held. + */ + printk_deferred_enter(); write_seqlock(&zonelist_update_seq); #ifdef CONFIG_NUMA @@ -5851,6 +5865,8 @@ static void __build_all_zonelists(void *data) } write_sequnlock(&zonelist_update_seq); + printk_deferred_exit(); + local_irq_restore(flags); } static noinline void __init From d60f15682a5ce51e8119c1b9ff522494554e33b5 Mon Sep 17 00:00:00 2001 From: Aurabindo Pillai Date: Fri, 24 Mar 2023 10:42:37 -0400 Subject: [PATCH 274/755] drm/amd/display: Fix hang when skipping modeset commit da5e14909776edea4462672fb4a3007802d262e7 upstream. [Why&How] When skipping full modeset since the only state change was a front porch change, the DC commit sequence requires extra checks to handle non existant plane states being asked to be removed from context. Reviewed-by: Alvin Lee Acked-by: Qingqing Zhuo Signed-off-by: Aurabindo Pillai Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Greg Kroah-Hartman --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 5 ++++- drivers/gpu/drm/amd/display/dc/core/dc_resource.c | 3 +++ 2 files changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index 1e7083bc8a52..3f3242783e1c 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -5776,6 +5776,8 @@ static void amdgpu_dm_commit_planes(struct drm_atomic_state *state, continue; dc_plane = dm_new_plane_state->dc_state; + if (!dc_plane) + continue; bundle->surface_updates[planes_count].surface = dc_plane; if (new_pcrtc_state->color_mgmt_changed) { @@ -7029,8 +7031,9 @@ static int dm_update_plane_state(struct dc *dc, return -EINVAL; } + if (dm_old_plane_state->dc_state) + dc_plane_state_release(dm_old_plane_state->dc_state); - dc_plane_state_release(dm_old_plane_state->dc_state); dm_new_plane_state->dc_state = NULL; *lock_and_validation_needed = true; diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c index de246e183d6b..cdcd5051dd66 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_resource.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_resource.c @@ -1315,6 +1315,9 @@ bool dc_remove_plane_from_context( struct dc_stream_status *stream_status = NULL; struct resource_pool *pool = dc->res_pool; + if (!plane_state) + return true; + for (i = 0; i < context->stream_count; i++) if (context->streams[i] == stream) { stream_status = &context->stream_status[i]; From f53660ec669f60c772fdf7d75d1c24d288547cee Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 17 May 2023 11:36:05 +0200 Subject: [PATCH 275/755] Linux 5.4.243 Link: https://lore.kernel.org/r/20230515161722.146344674@linuxfoundation.org Tested-by: Chris Paterson (CIP) Tested-by: Shuah Khan Tested-by: Sudip Mukherjee Tested-by: Harshit Mogalapalli Tested-by: Jon Hunter Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index ab3ba4358842..f660c3e224ec 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 4 -SUBLEVEL = 242 +SUBLEVEL = 243 EXTRAVERSION = NAME = Kleptomaniac Octopus From d4992b2b5c68d6a8966bf2137a3d720548fc3d01 Mon Sep 17 00:00:00 2001 From: Ioana Ciornei Date: Thu, 17 Jun 2021 15:29:04 +0300 Subject: [PATCH 276/755] driver core: add a helper to setup both the of_node and fwnode of a device [ Upstream commit 43e76d463c09a0272b84775bcc727c1eb8b384b2 ] There are many places where both the fwnode_handle and the of_node of a device need to be populated. Add a function which does both so that we have consistency. Suggested-by: Andrew Lunn Signed-off-by: Ioana Ciornei Reviewed-by: Greg Kroah-Hartman Signed-off-by: David S. Miller Stable-dep-of: a26cc2934331 ("drm/mipi-dsi: Set the fwnode for mipi_dsi_device") Signed-off-by: Sasha Levin --- drivers/base/core.c | 7 +++++++ include/linux/device.h | 1 + 2 files changed, 8 insertions(+) diff --git a/drivers/base/core.c b/drivers/base/core.c index 1b016fdd1a75..f8e157ede44f 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -3474,6 +3474,13 @@ void device_set_of_node_from_dev(struct device *dev, const struct device *dev2) } EXPORT_SYMBOL_GPL(device_set_of_node_from_dev); +void device_set_node(struct device *dev, struct fwnode_handle *fwnode) +{ + dev->fwnode = fwnode; + dev->of_node = to_of_node(fwnode); +} +EXPORT_SYMBOL_GPL(device_set_node); + int device_match_name(struct device *dev, const void *name) { return sysfs_streq(dev_name(dev), name); diff --git a/include/linux/device.h b/include/linux/device.h index 3414b5a67b46..d74275e2047a 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -1528,6 +1528,7 @@ extern int device_online(struct device *dev); extern void set_primary_fwnode(struct device *dev, struct fwnode_handle *fwnode); extern void set_secondary_fwnode(struct device *dev, struct fwnode_handle *fwnode); void device_set_of_node_from_dev(struct device *dev, const struct device *dev2); +void device_set_node(struct device *dev, struct fwnode_handle *fwnode); static inline int dev_num_vf(struct device *dev) { From 22b8ac608af5b8a859ed9dc0b15f31dea26cdbb0 Mon Sep 17 00:00:00 2001 From: Saravana Kannan Date: Thu, 9 Mar 2023 22:39:09 -0800 Subject: [PATCH 277/755] drm/mipi-dsi: Set the fwnode for mipi_dsi_device [ Upstream commit a26cc2934331b57b5a7164bff344f0a2ec245fc0 ] After commit 3fb16866b51d ("driver core: fw_devlink: Make cycle detection more robust"), fw_devlink prints an error when consumer devices don't have their fwnode set. This used to be ignored silently. Set the fwnode mipi_dsi_device so fw_devlink can find them and properly track their dependencies. This fixes errors like this: [ 0.334054] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with regulator-lcd-1v8 [ 0.346964] nwl-dsi 30a00000.mipi-dsi: Failed to create device link with backlight-dsi Reported-by: Martin Kepplinger Link: https://lore.kernel.org/lkml/2a8e407f4f18c9350f8629a2b5fa18673355b2ae.camel@puri.sm/ Fixes: 068a00233969 ("drm: Add MIPI DSI bus support") Signed-off-by: Saravana Kannan Tested-by: Martin Kepplinger Link: https://lore.kernel.org/r/20230310063910.2474472-1-saravanak@google.com Signed-off-by: Maxime Ripard Signed-off-by: Sasha Levin --- drivers/gpu/drm/drm_mipi_dsi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/drm_mipi_dsi.c b/drivers/gpu/drm/drm_mipi_dsi.c index b942c69e9b48..17a96f1d9234 100644 --- a/drivers/gpu/drm/drm_mipi_dsi.c +++ b/drivers/gpu/drm/drm_mipi_dsi.c @@ -221,7 +221,7 @@ mipi_dsi_device_register_full(struct mipi_dsi_host *host, return dsi; } - dsi->dev.of_node = info->node; + device_set_node(&dsi->dev, of_fwnode_handle(info->node)); dsi->channel = info->channel; strlcpy(dsi->name, info->type, sizeof(dsi->name)); From 7460ac5a66fb613f996a6684f8b85e526c6ddfbc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 23 Apr 2023 06:48:45 +0100 Subject: [PATCH 278/755] ARM: 9296/1: HP Jornada 7XX: fix kernel-doc warnings [ Upstream commit 46dd6078dbc7e363a8bb01209da67015a1538929 ] Fix kernel-doc warnings from the kernel test robot: jornada720_ssp.c:24: warning: Function parameter or member 'jornada_ssp_lock' not described in 'DEFINE_SPINLOCK' jornada720_ssp.c:24: warning: expecting prototype for arch/arm/mac(). Prototype was for DEFINE_SPINLOCK() instead jornada720_ssp.c:34: warning: Function parameter or member 'byte' not described in 'jornada_ssp_reverse' jornada720_ssp.c:57: warning: Function parameter or member 'byte' not described in 'jornada_ssp_byte' jornada720_ssp.c:85: warning: Function parameter or member 'byte' not described in 'jornada_ssp_inout' Link: lore.kernel.org/r/202304210535.tWby3jWF-lkp@intel.com Fixes: 69ebb22277a5 ("[ARM] 4506/1: HP Jornada 7XX: Addition of SSP Platform Driver") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Cc: Arnd Bergmann Cc: Kristoffer Ericson Cc: patches@armlinux.org.uk Signed-off-by: Russell King (Oracle) Signed-off-by: Sasha Levin --- arch/arm/mach-sa1100/jornada720_ssp.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 1dbe98948ce3..9627c4cf3e41 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -1,5 +1,5 @@ // SPDX-License-Identifier: GPL-2.0-only -/** +/* * arch/arm/mac-sa1100/jornada720_ssp.c * * Copyright (C) 2006/2007 Kristoffer Ericson @@ -26,6 +26,7 @@ static unsigned long jornada_ssp_flags; /** * jornada_ssp_reverse - reverses input byte + * @byte: input byte to reverse * * we need to reverse all data we receive from the mcu due to its physical location * returns : 01110111 -> 11101110 @@ -46,6 +47,7 @@ EXPORT_SYMBOL(jornada_ssp_reverse); /** * jornada_ssp_byte - waits for ready ssp bus and sends byte + * @byte: input byte to transmit * * waits for fifo buffer to clear and then transmits, if it doesn't then we will * timeout after rounds. Needs mcu running before its called. @@ -77,6 +79,7 @@ EXPORT_SYMBOL(jornada_ssp_byte); /** * jornada_ssp_inout - decide if input is command or trading byte + * @byte: input byte to send (may be %TXDUMMY) * * returns : (jornada_ssp_byte(byte)) on success * : %-ETIMEDOUT on timeout failure From 42e1dafa65e216a59fd0ea9dce5ebb59824803d6 Mon Sep 17 00:00:00 2001 From: Roy Novich Date: Sun, 7 May 2023 16:57:43 +0300 Subject: [PATCH 279/755] linux/dim: Do nothing if no time delta between samples [ Upstream commit 162bd18eb55adf464a0fa2b4144b8d61c75ff7c2 ] Add return value for dim_calc_stats. This is an indication for the caller if curr_stats was assigned by the function. Avoid using curr_stats uninitialized over {rdma/net}_dim, when no time delta between samples. Coverity reported this potential use of an uninitialized variable. Fixes: 4c4dbb4a7363 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux") Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing") Signed-off-by: Roy Novich Reviewed-by: Aya Levin Reviewed-by: Saeed Mahameed Signed-off-by: Tariq Toukan Reviewed-by: Leon Romanovsky Reviewed-by: Michal Kubiak Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- include/linux/dim.h | 3 ++- lib/dim/dim.c | 5 +++-- lib/dim/net_dim.c | 3 ++- lib/dim/rdma_dim.c | 3 ++- 4 files changed, 9 insertions(+), 5 deletions(-) diff --git a/include/linux/dim.h b/include/linux/dim.h index 2571da63877c..ad5f219ce2ff 100644 --- a/include/linux/dim.h +++ b/include/linux/dim.h @@ -233,8 +233,9 @@ void dim_park_tired(struct dim *dim); * * Calculate the delta between two samples (in data rates). * Takes into consideration counter wrap-around. + * Returned boolean indicates whether curr_stats are reliable. */ -void dim_calc_stats(struct dim_sample *start, struct dim_sample *end, +bool dim_calc_stats(struct dim_sample *start, struct dim_sample *end, struct dim_stats *curr_stats); /** diff --git a/lib/dim/dim.c b/lib/dim/dim.c index 38045d6d0538..e89aaf07bde5 100644 --- a/lib/dim/dim.c +++ b/lib/dim/dim.c @@ -54,7 +54,7 @@ void dim_park_tired(struct dim *dim) } EXPORT_SYMBOL(dim_park_tired); -void dim_calc_stats(struct dim_sample *start, struct dim_sample *end, +bool dim_calc_stats(struct dim_sample *start, struct dim_sample *end, struct dim_stats *curr_stats) { /* u32 holds up to 71 minutes, should be enough */ @@ -66,7 +66,7 @@ void dim_calc_stats(struct dim_sample *start, struct dim_sample *end, start->comp_ctr); if (!delta_us) - return; + return false; curr_stats->ppms = DIV_ROUND_UP(npkts * USEC_PER_MSEC, delta_us); curr_stats->bpms = DIV_ROUND_UP(nbytes * USEC_PER_MSEC, delta_us); @@ -79,5 +79,6 @@ void dim_calc_stats(struct dim_sample *start, struct dim_sample *end, else curr_stats->cpe_ratio = 0; + return true; } EXPORT_SYMBOL(dim_calc_stats); diff --git a/lib/dim/net_dim.c b/lib/dim/net_dim.c index dae3b51ac3d9..0e4f3a686f1d 100644 --- a/lib/dim/net_dim.c +++ b/lib/dim/net_dim.c @@ -227,7 +227,8 @@ void net_dim(struct dim *dim, struct dim_sample end_sample) dim->start_sample.event_ctr); if (nevents < DIM_NEVENTS) break; - dim_calc_stats(&dim->start_sample, &end_sample, &curr_stats); + if (!dim_calc_stats(&dim->start_sample, &end_sample, &curr_stats)) + break; if (net_dim_decision(&curr_stats, dim)) { dim->state = DIM_APPLY_NEW_PROFILE; schedule_work(&dim->work); diff --git a/lib/dim/rdma_dim.c b/lib/dim/rdma_dim.c index f7e26c7b4749..d32c8b105adc 100644 --- a/lib/dim/rdma_dim.c +++ b/lib/dim/rdma_dim.c @@ -88,7 +88,8 @@ void rdma_dim(struct dim *dim, u64 completions) nevents = curr_sample->event_ctr - dim->start_sample.event_ctr; if (nevents < DIM_NEVENTS) break; - dim_calc_stats(&dim->start_sample, curr_sample, &curr_stats); + if (!dim_calc_stats(&dim->start_sample, curr_sample, &curr_stats)) + break; if (rdma_dim_decision(&curr_stats, dim)) { dim->state = DIM_APPLY_NEW_PROFILE; schedule_work(&dim->work); From d7343f8de019ebb55b2b6ef79b971f6ceb361a99 Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Mon, 8 May 2023 10:55:43 -0700 Subject: [PATCH 280/755] net: Fix load-tearing on sk->sk_stamp in sock_recv_cmsgs(). [ Upstream commit dfd9248c071a3710c24365897459538551cb7167 ] KCSAN found a data race in sock_recv_cmsgs() where the read access to sk->sk_stamp needs READ_ONCE(). BUG: KCSAN: data-race in packet_recvmsg / packet_recvmsg write (marked) to 0xffff88803c81f258 of 8 bytes by task 19171 on cpu 0: sock_write_timestamp include/net/sock.h:2670 [inline] sock_recv_cmsgs include/net/sock.h:2722 [inline] packet_recvmsg+0xb97/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88803c81f258 of 8 bytes by task 19183 on cpu 1: sock_recv_cmsgs include/net/sock.h:2721 [inline] packet_recvmsg+0xb64/0xd00 net/packet/af_packet.c:3489 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x11a/0x130 net/socket.c:1040 sock_read_iter+0x176/0x220 net/socket.c:1118 call_read_iter include/linux/fs.h:1845 [inline] new_sync_read fs/read_write.c:389 [inline] vfs_read+0x5e0/0x630 fs/read_write.c:470 ksys_read+0x163/0x1a0 fs/read_write.c:613 __do_sys_read fs/read_write.c:623 [inline] __se_sys_read fs/read_write.c:621 [inline] __x64_sys_read+0x41/0x50 fs/read_write.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0xffffffffc4653600 -> 0x0000000000000000 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 19183 Comm: syz-executor.5 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 6c7c98bad488 ("sock: avoid dirtying sk_stamp, if possible") Reported-by: syzbot Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Link: https://lore.kernel.org/r/20230508175543.55756-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- include/net/sock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/net/sock.h b/include/net/sock.h index 26dd07e47a7c..fa19c6ba2444 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -2448,7 +2448,7 @@ static inline void sock_recv_ts_and_drops(struct msghdr *msg, struct sock *sk, __sock_recv_ts_and_drops(msg, sk, skb); else if (unlikely(sock_flag(sk, SOCK_TIMESTAMP))) sock_write_timestamp(sk, skb->tstamp); - else if (unlikely(sk->sk_stamp == SK_DEFAULT_STAMP)) + else if (unlikely(sock_read_timestamp(sk) == SK_DEFAULT_STAMP)) sock_write_timestamp(sk, 0); } From b47aae7038ccaeda06d483f86747e74cf981c4c9 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 4 May 2023 14:55:02 +0200 Subject: [PATCH 281/755] netfilter: conntrack: fix possible bug_on with enable_hooks=1 [ Upstream commit e72eeab542dbf4f544e389e64fa13b82a1b6d003 ] I received a bug report (no reproducer so far) where we trip over 712 rcu_read_lock(); 713 ct_hook = rcu_dereference(nf_ct_hook); 714 BUG_ON(ct_hook == NULL); // here In nf_conntrack_destroy(). First turn this BUG_ON into a WARN. I think it was triggered via enable_hooks=1 flag. When this flag is turned on, the conntrack hooks are registered before nf_ct_hook pointer gets assigned. This opens a short window where packets enter the conntrack machinery, can have skb->_nfct set up and a subsequent kfree_skb might occur before nf_ct_hook is set. Call nf_conntrack_init_end() to set nf_ct_hook before we register the pernet ops. Fixes: ba3fbe663635 ("netfilter: nf_conntrack: provide modparam to always register conntrack hooks") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/core.c | 6 ++++-- net/netfilter/nf_conntrack_standalone.c | 3 ++- 2 files changed, 6 insertions(+), 3 deletions(-) diff --git a/net/netfilter/core.c b/net/netfilter/core.c index 451b2df998ea..c35f45afd394 100644 --- a/net/netfilter/core.c +++ b/net/netfilter/core.c @@ -577,9 +577,11 @@ void nf_conntrack_destroy(struct nf_conntrack *nfct) rcu_read_lock(); ct_hook = rcu_dereference(nf_ct_hook); - BUG_ON(ct_hook == NULL); - ct_hook->destroy(nfct); + if (ct_hook) + ct_hook->destroy(nfct); rcu_read_unlock(); + + WARN_ON(!ct_hook); } EXPORT_SYMBOL(nf_conntrack_destroy); diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c index 43c3c3be6def..1e3dbed9d784 100644 --- a/net/netfilter/nf_conntrack_standalone.c +++ b/net/netfilter/nf_conntrack_standalone.c @@ -1180,11 +1180,12 @@ static int __init nf_conntrack_standalone_init(void) nf_conntrack_htable_size_user = nf_conntrack_htable_size; #endif + nf_conntrack_init_end(); + ret = register_pernet_subsys(&nf_conntrack_net_ops); if (ret < 0) goto out_pernet; - nf_conntrack_init_end(); return 0; out_pernet: From a507022c862e10744a92c4bf5709775450a110ad Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 9 May 2023 16:56:34 +0000 Subject: [PATCH 282/755] netlink: annotate accesses to nlk->cb_running [ Upstream commit a939d14919b799e6fff8a9c80296ca229ba2f8a4 ] Both netlink_recvmsg() and netlink_native_seq_show() read nlk->cb_running locklessly. Use READ_ONCE() there. Add corresponding WRITE_ONCE() to netlink_dump() and __netlink_dump_start() syzbot reported: BUG: KCSAN: data-race in __netlink_dump_start / netlink_recvmsg write to 0xffff88813ea4db59 of 1 bytes by task 28219 on cpu 0: __netlink_dump_start+0x3af/0x4d0 net/netlink/af_netlink.c:2399 netlink_dump_start include/linux/netlink.h:308 [inline] rtnetlink_rcv_msg+0x70f/0x8c0 net/core/rtnetlink.c:6130 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2577 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6192 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x56f/0x640 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x665/0x770 net/netlink/af_netlink.c:1942 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] sock_write_iter+0x1aa/0x230 net/socket.c:1138 call_write_iter include/linux/fs.h:1851 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x463/0x760 fs/read_write.c:584 ksys_write+0xeb/0x1a0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x42/0x50 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff88813ea4db59 of 1 bytes by task 28222 on cpu 1: netlink_recvmsg+0x3b4/0x730 net/netlink/af_netlink.c:2022 sock_recvmsg_nosec+0x4c/0x80 net/socket.c:1017 ____sys_recvmsg+0x2db/0x310 net/socket.c:2718 ___sys_recvmsg net/socket.c:2762 [inline] do_recvmmsg+0x2e5/0x710 net/socket.c:2856 __sys_recvmmsg net/socket.c:2935 [inline] __do_sys_recvmmsg net/socket.c:2958 [inline] __se_sys_recvmmsg net/socket.c:2951 [inline] __x64_sys_recvmmsg+0xe2/0x160 net/socket.c:2951 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0x00 -> 0x01 Fixes: 16b304f3404f ("netlink: Eliminate kmalloc in netlink dump operation.") Reported-by: syzbot Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/netlink/af_netlink.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 00f040fb46b9..31a3a562854f 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -1991,7 +1991,7 @@ static int netlink_recvmsg(struct socket *sock, struct msghdr *msg, size_t len, skb_free_datagram(sk, skb); - if (nlk->cb_running && + if (READ_ONCE(nlk->cb_running) && atomic_read(&sk->sk_rmem_alloc) <= sk->sk_rcvbuf / 2) { ret = netlink_dump(sk); if (ret) { @@ -2284,7 +2284,7 @@ static int netlink_dump(struct sock *sk) if (cb->done) cb->done(cb); - nlk->cb_running = false; + WRITE_ONCE(nlk->cb_running, false); module = cb->module; skb = cb->skb; mutex_unlock(nlk->cb_mutex); @@ -2347,7 +2347,7 @@ int __netlink_dump_start(struct sock *ssk, struct sk_buff *skb, goto error_put; } - nlk->cb_running = true; + WRITE_ONCE(nlk->cb_running, true); nlk->dump_done_errno = INT_MAX; mutex_unlock(nlk->cb_mutex); @@ -2636,7 +2636,7 @@ static int netlink_seq_show(struct seq_file *seq, void *v) nlk->groups ? (u32)nlk->groups[0] : 0, sk_rmem_alloc_get(s), sk_wmem_alloc_get(s), - nlk->cb_running, + READ_ONCE(nlk->cb_running), refcount_read(&s->sk_refcnt), atomic_read(&s->sk_drops), sock_i_ino(s) From 1747aa98ab136b7a2aad2735270c93a94d2c9453 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 9 May 2023 16:35:53 +0000 Subject: [PATCH 283/755] net: annotate sk->sk_err write from do_recvmmsg() [ Upstream commit e05a5f510f26607616fecdd4ac136310c8bea56b ] do_recvmmsg() can write to sk->sk_err from multiple threads. As said before, many other points reading or writing sk_err need annotations. Fixes: 34b88a68f26a ("net: Fix use after free in the recvmmsg exit path") Signed-off-by: Eric Dumazet Reported-by: syzbot Reviewed-by: Kuniyuki Iwashima Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/socket.c b/net/socket.c index 02feaf5bd84a..9dd4c7ce8343 100644 --- a/net/socket.c +++ b/net/socket.c @@ -2723,7 +2723,7 @@ static int do_recvmmsg(int fd, struct mmsghdr __user *mmsg, * error to return on the next call or if the * app asks about it using getsockopt(SO_ERROR). */ - sock->sk->sk_err = -err; + WRITE_ONCE(sock->sk->sk_err, -err); } out_put: fput_light(sock->file, fput_needed); From 57a269d82f2ed41094c4bfb5b73210e48860ce43 Mon Sep 17 00:00:00 2001 From: Menglong Dong Date: Thu, 14 Jan 2021 18:32:38 -0800 Subject: [PATCH 284/755] net: tap: check vlan with eth_type_vlan() method [ Upstream commit b69df2608281b71575fbb3b9f426dbcc4be8a700 ] Replace some checks for ETH_P_8021Q and ETH_P_8021AD in drivers/net/tap.c with eth_type_vlan. Signed-off-by: Menglong Dong Link: https://lore.kernel.org/r/20210115023238.4681-1-dong.menglong@zte.com.cn Signed-off-by: Jakub Kicinski Stable-dep-of: 4063384ef762 ("net: add vlan_get_protocol_and_depth() helper") Signed-off-by: Sasha Levin --- drivers/net/tap.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/tap.c b/drivers/net/tap.c index a522d1673fa8..ffdf0e165930 100644 --- a/drivers/net/tap.c +++ b/drivers/net/tap.c @@ -715,8 +715,7 @@ static ssize_t tap_get_user(struct tap_queue *q, void *msg_control, skb_probe_transport_header(skb); /* Move network header to the right position for VLAN tagged packets */ - if ((skb->protocol == htons(ETH_P_8021Q) || - skb->protocol == htons(ETH_P_8021AD)) && + if (eth_type_vlan(skb->protocol) && __vlan_get_protocol(skb, skb->protocol, &depth) != 0) skb_set_network_header(skb, depth); @@ -1177,8 +1176,7 @@ static int tap_get_user_xdp(struct tap_queue *q, struct xdp_buff *xdp) } /* Move network header to the right position for VLAN tagged packets */ - if ((skb->protocol == htons(ETH_P_8021Q) || - skb->protocol == htons(ETH_P_8021AD)) && + if (eth_type_vlan(skb->protocol) && __vlan_get_protocol(skb, skb->protocol, &depth) != 0) skb_set_network_header(skb, depth); From 4188c5269475ac59d467b5814c5df02756f6d907 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 9 May 2023 13:18:57 +0000 Subject: [PATCH 285/755] net: add vlan_get_protocol_and_depth() helper MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 4063384ef762cc5946fc7a3f89879e76c6ec51e2 ] Before blamed commit, pskb_may_pull() was used instead of skb_header_pointer() in __vlan_get_protocol() and friends. Few callers depended on skb->head being populated with MAC header, syzbot caught one of them (skb_mac_gso_segment()) Add vlan_get_protocol_and_depth() to make the intent clearer and use it where sensible. This is a more generic fix than commit e9d3f80935b6 ("net/af_packet: make sure to pull mac header") which was dealing with a similar issue. kernel BUG at include/linux/skbuff.h:2655 ! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 1441 Comm: syz-executor199 Not tainted 6.1.24-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:__skb_pull include/linux/skbuff.h:2655 [inline] RIP: 0010:skb_mac_gso_segment+0x68f/0x6a0 net/core/gro.c:136 Code: fd 48 8b 5c 24 10 44 89 6b 70 48 c7 c7 c0 ae 0d 86 44 89 e6 e8 a1 91 d0 00 48 c7 c7 00 af 0d 86 48 89 de 31 d2 e8 d1 4a e9 ff <0f> 0b 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 55 48 89 e5 41 RSP: 0018:ffffc90001bd7520 EFLAGS: 00010286 RAX: ffffffff8469736a RBX: ffff88810f31dac0 RCX: ffff888115a18b00 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffc90001bd75e8 R08: ffffffff84697183 R09: fffff5200037adf9 R10: 0000000000000000 R11: dffffc0000000001 R12: 0000000000000012 R13: 000000000000fee5 R14: 0000000000005865 R15: 000000000000fed7 FS: 000055555633f300(0000) GS:ffff8881f6a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 0000000116fea000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: [] __skb_gso_segment+0x32d/0x4c0 net/core/dev.c:3419 [] skb_gso_segment include/linux/netdevice.h:4819 [inline] [] validate_xmit_skb+0x3aa/0xee0 net/core/dev.c:3725 [] __dev_queue_xmit+0x1332/0x3300 net/core/dev.c:4313 [] dev_queue_xmit+0x17/0x20 include/linux/netdevice.h:3029 [] packet_snd net/packet/af_packet.c:3111 [inline] [] packet_sendmsg+0x49d2/0x6470 net/packet/af_packet.c:3142 [] sock_sendmsg_nosec net/socket.c:716 [inline] [] sock_sendmsg net/socket.c:736 [inline] [] __sys_sendto+0x472/0x5f0 net/socket.c:2139 [] __do_sys_sendto net/socket.c:2151 [inline] [] __se_sys_sendto net/socket.c:2147 [inline] [] __x64_sys_sendto+0xe5/0x100 net/socket.c:2147 [] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [] do_syscall_64+0x2f/0x50 arch/x86/entry/common.c:80 [] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 469aceddfa3e ("vlan: consolidate VLAN parsing code and limit max parsing depth") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Toke Høiland-Jørgensen Cc: Willem de Bruijn Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/tap.c | 4 ++-- include/linux/if_vlan.h | 17 +++++++++++++++++ net/bridge/br_forward.c | 2 +- net/core/dev.c | 2 +- net/packet/af_packet.c | 6 ++---- 5 files changed, 23 insertions(+), 8 deletions(-) diff --git a/drivers/net/tap.c b/drivers/net/tap.c index ffdf0e165930..574c17aa4b09 100644 --- a/drivers/net/tap.c +++ b/drivers/net/tap.c @@ -716,7 +716,7 @@ static ssize_t tap_get_user(struct tap_queue *q, void *msg_control, /* Move network header to the right position for VLAN tagged packets */ if (eth_type_vlan(skb->protocol) && - __vlan_get_protocol(skb, skb->protocol, &depth) != 0) + vlan_get_protocol_and_depth(skb, skb->protocol, &depth) != 0) skb_set_network_header(skb, depth); rcu_read_lock(); @@ -1177,7 +1177,7 @@ static int tap_get_user_xdp(struct tap_queue *q, struct xdp_buff *xdp) /* Move network header to the right position for VLAN tagged packets */ if (eth_type_vlan(skb->protocol) && - __vlan_get_protocol(skb, skb->protocol, &depth) != 0) + vlan_get_protocol_and_depth(skb, skb->protocol, &depth) != 0) skb_set_network_header(skb, depth); rcu_read_lock(); diff --git a/include/linux/if_vlan.h b/include/linux/if_vlan.h index 41a518336673..4e7e72f3da5b 100644 --- a/include/linux/if_vlan.h +++ b/include/linux/if_vlan.h @@ -626,6 +626,23 @@ static inline __be16 vlan_get_protocol(const struct sk_buff *skb) return __vlan_get_protocol(skb, skb->protocol, NULL); } +/* This version of __vlan_get_protocol() also pulls mac header in skb->head */ +static inline __be16 vlan_get_protocol_and_depth(struct sk_buff *skb, + __be16 type, int *depth) +{ + int maclen; + + type = __vlan_get_protocol(skb, type, &maclen); + + if (type) { + if (!pskb_may_pull(skb, maclen)) + type = 0; + else if (depth) + *depth = maclen; + } + return type; +} + /* A getter for the SKB protocol field which will handle VLAN tags consistently * whether VLAN acceleration is enabled or not. */ diff --git a/net/bridge/br_forward.c b/net/bridge/br_forward.c index 86637000f275..a92d5359b5c0 100644 --- a/net/bridge/br_forward.c +++ b/net/bridge/br_forward.c @@ -43,7 +43,7 @@ int br_dev_queue_push_xmit(struct net *net, struct sock *sk, struct sk_buff *skb skb->protocol == htons(ETH_P_8021AD))) { int depth; - if (!__vlan_get_protocol(skb, skb->protocol, &depth)) + if (!vlan_get_protocol_and_depth(skb, skb->protocol, &depth)) goto drop; skb_set_network_header(skb, depth); diff --git a/net/core/dev.c b/net/core/dev.c index 1a4e20c4ba05..c5561c88a836 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2936,7 +2936,7 @@ __be16 skb_network_protocol(struct sk_buff *skb, int *depth) type = eth->h_proto; } - return __vlan_get_protocol(skb, type, depth); + return vlan_get_protocol_and_depth(skb, type, depth); } /** diff --git a/net/packet/af_packet.c b/net/packet/af_packet.c index 109a848aca15..7a940f2f3067 100644 --- a/net/packet/af_packet.c +++ b/net/packet/af_packet.c @@ -1876,10 +1876,8 @@ static void packet_parse_headers(struct sk_buff *skb, struct socket *sock) /* Move network header to the right position for VLAN tagged packets */ if (likely(skb->dev->type == ARPHRD_ETHER) && eth_type_vlan(skb->protocol) && - __vlan_get_protocol(skb, skb->protocol, &depth) != 0) { - if (pskb_may_pull(skb, depth)) - skb_set_network_header(skb, depth); - } + vlan_get_protocol_and_depth(skb, skb->protocol, &depth) != 0) + skb_set_network_header(skb, depth); skb_probe_transport_header(skb); } From 1aa872e967f2017041bb2284479b3c6ce8d121b5 Mon Sep 17 00:00:00 2001 From: "t.feng" Date: Wed, 10 May 2023 11:50:44 +0800 Subject: [PATCH 286/755] ipvlan:Fix out-of-bounds caused by unclear skb->cb [ Upstream commit 90cbed5247439a966b645b34eb0a2e037836ea8e ] If skb enqueue the qdisc, fq_skb_cb(skb)->time_to_send is changed which is actually skb->cb, and IPCB(skb_in)->opt will be used in __ip_options_echo. It is possible that memcpy is out of bounds and lead to stack overflow. We should clear skb->cb before ip_local_out or ip6_local_out. v2: 1. clean the stack info 2. use IPCB/IP6CB instead of skb->cb crash on stable-5.10(reproduce in kasan kernel). Stack info: [ 2203.651571] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x589/0x800 [ 2203.653327] Write of size 4 at addr ffff88811a388f27 by task swapper/3/0 [ 2203.655460] CPU: 3 PID: 0 Comm: swapper/3 Kdump: loaded Not tainted 5.10.0-60.18.0.50.h856.kasan.eulerosv2r11.x86_64 #1 [ 2203.655466] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.10.2-0-g5f4c7b1-20181220_000000-szxrtosci10000 04/01/2014 [ 2203.655475] Call Trace: [ 2203.655481] [ 2203.655501] dump_stack+0x9c/0xd3 [ 2203.655514] print_address_description.constprop.0+0x19/0x170 [ 2203.655530] __kasan_report.cold+0x6c/0x84 [ 2203.655586] kasan_report+0x3a/0x50 [ 2203.655594] check_memory_region+0xfd/0x1f0 [ 2203.655601] memcpy+0x39/0x60 [ 2203.655608] __ip_options_echo+0x589/0x800 [ 2203.655654] __icmp_send+0x59a/0x960 [ 2203.655755] nf_send_unreach+0x129/0x3d0 [nf_reject_ipv4] [ 2203.655763] reject_tg+0x77/0x1bf [ipt_REJECT] [ 2203.655772] ipt_do_table+0x691/0xa40 [ip_tables] [ 2203.655821] nf_hook_slow+0x69/0x100 [ 2203.655828] __ip_local_out+0x21e/0x2b0 [ 2203.655857] ip_local_out+0x28/0x90 [ 2203.655868] ipvlan_process_v4_outbound+0x21e/0x260 [ipvlan] [ 2203.655931] ipvlan_xmit_mode_l3+0x3bd/0x400 [ipvlan] [ 2203.655967] ipvlan_queue_xmit+0xb3/0x190 [ipvlan] [ 2203.655977] ipvlan_start_xmit+0x2e/0xb0 [ipvlan] [ 2203.655984] xmit_one.constprop.0+0xe1/0x280 [ 2203.655992] dev_hard_start_xmit+0x62/0x100 [ 2203.656000] sch_direct_xmit+0x215/0x640 [ 2203.656028] __qdisc_run+0x153/0x1f0 [ 2203.656069] __dev_queue_xmit+0x77f/0x1030 [ 2203.656173] ip_finish_output2+0x59b/0xc20 [ 2203.656244] __ip_finish_output.part.0+0x318/0x3d0 [ 2203.656312] ip_finish_output+0x168/0x190 [ 2203.656320] ip_output+0x12d/0x220 [ 2203.656357] __ip_queue_xmit+0x392/0x880 [ 2203.656380] __tcp_transmit_skb+0x1088/0x11c0 [ 2203.656436] __tcp_retransmit_skb+0x475/0xa30 [ 2203.656505] tcp_retransmit_skb+0x2d/0x190 [ 2203.656512] tcp_retransmit_timer+0x3af/0x9a0 [ 2203.656519] tcp_write_timer_handler+0x3ba/0x510 [ 2203.656529] tcp_write_timer+0x55/0x180 [ 2203.656542] call_timer_fn+0x3f/0x1d0 [ 2203.656555] expire_timers+0x160/0x200 [ 2203.656562] run_timer_softirq+0x1f4/0x480 [ 2203.656606] __do_softirq+0xfd/0x402 [ 2203.656613] asm_call_irq_on_stack+0x12/0x20 [ 2203.656617] [ 2203.656623] do_softirq_own_stack+0x37/0x50 [ 2203.656631] irq_exit_rcu+0x134/0x1a0 [ 2203.656639] sysvec_apic_timer_interrupt+0x36/0x80 [ 2203.656646] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 2203.656654] RIP: 0010:default_idle+0x13/0x20 [ 2203.656663] Code: 89 f0 5d 41 5c 41 5d 41 5e c3 cc cc cc cc cc cc cc cc cc cc cc cc cc 0f 1f 44 00 00 0f 1f 44 00 00 0f 00 2d 9f 32 57 00 fb f4 cc cc cc cc 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 54 be 08 [ 2203.656668] RSP: 0018:ffff88810036fe78 EFLAGS: 00000256 [ 2203.656676] RAX: ffffffffaf2a87f0 RBX: ffff888100360000 RCX: ffffffffaf290191 [ 2203.656681] RDX: 0000000000098b5e RSI: 0000000000000004 RDI: ffff88811a3c4f60 [ 2203.656686] RBP: 0000000000000000 R08: 0000000000000001 R09: ffff88811a3c4f63 [ 2203.656690] R10: ffffed10234789ec R11: 0000000000000001 R12: 0000000000000003 [ 2203.656695] R13: ffff888100360000 R14: 0000000000000000 R15: 0000000000000000 [ 2203.656729] default_idle_call+0x5a/0x150 [ 2203.656735] cpuidle_idle_call+0x1c6/0x220 [ 2203.656780] do_idle+0xab/0x100 [ 2203.656786] cpu_startup_entry+0x19/0x20 [ 2203.656793] secondary_startup_64_no_verify+0xc2/0xcb [ 2203.657409] The buggy address belongs to the page: [ 2203.658648] page:0000000027a9842f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11a388 [ 2203.658665] flags: 0x17ffffc0001000(reserved|node=0|zone=2|lastcpupid=0x1fffff) [ 2203.658675] raw: 0017ffffc0001000 ffffea000468e208 ffffea000468e208 0000000000000000 [ 2203.658682] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 2203.658686] page dumped because: kasan: bad access detected To reproduce(ipvlan with IPVLAN_MODE_L3): Env setting: ======================================================= modprobe ipvlan ipvlan_default_mode=1 sysctl net.ipv4.conf.eth0.forwarding=1 iptables -t nat -A POSTROUTING -s 20.0.0.0/255.255.255.0 -o eth0 -j MASQUERADE ip link add gw link eth0 type ipvlan ip -4 addr add 20.0.0.254/24 dev gw ip netns add net1 ip link add ipv1 link eth0 type ipvlan ip link set ipv1 netns net1 ip netns exec net1 ip link set ipv1 up ip netns exec net1 ip -4 addr add 20.0.0.4/24 dev ipv1 ip netns exec net1 route add default gw 20.0.0.254 ip netns exec net1 tc qdisc add dev ipv1 root netem loss 10% ifconfig gw up iptables -t filter -A OUTPUT -p tcp --dport 8888 -j REJECT --reject-with icmp-port-unreachable ======================================================= And then excute the shell(curl any address of eth0 can reach): for((i=1;i<=100000;i++)) do ip netns exec net1 curl x.x.x.x:8888 done ======================================================= Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: "t.feng" Suggested-by: Florian Westphal Reviewed-by: Paolo Abeni Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ipvlan/ipvlan_core.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/net/ipvlan/ipvlan_core.c b/drivers/net/ipvlan/ipvlan_core.c index a33149ee0ddc..0a5b5ff597c6 100644 --- a/drivers/net/ipvlan/ipvlan_core.c +++ b/drivers/net/ipvlan/ipvlan_core.c @@ -437,6 +437,9 @@ static int ipvlan_process_v4_outbound(struct sk_buff *skb) goto err; } skb_dst_set(skb, &rt->dst); + + memset(IPCB(skb), 0, sizeof(*IPCB(skb))); + err = ip_local_out(net, skb->sk, skb); if (unlikely(net_xmit_eval(err))) dev->stats.tx_errors++; @@ -475,6 +478,9 @@ static int ipvlan_process_v6_outbound(struct sk_buff *skb) goto err; } skb_dst_set(skb, dst); + + memset(IP6CB(skb), 0, sizeof(*IP6CB(skb))); + err = ip6_local_out(net, skb->sk, skb); if (unlikely(net_xmit_eval(err))) dev->stats.tx_errors++; From 699c9e7c9f6633b717d420018a3c614e83b22df2 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 9 May 2023 17:31:31 +0000 Subject: [PATCH 287/755] net: datagram: fix data-races in datagram_poll() [ Upstream commit 5bca1d081f44c9443e61841842ce4e9179d327b6 ] datagram_poll() runs locklessly, we should add READ_ONCE() annotations while reading sk->sk_err, sk->sk_shutdown and sk->sk_state. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet Reviewed-by: Kuniyuki Iwashima Link: https://lore.kernel.org/r/20230509173131.3263780-1-edumazet@google.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- net/core/datagram.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/net/core/datagram.c b/net/core/datagram.c index b0488f30f2c4..a5fc44448d60 100644 --- a/net/core/datagram.c +++ b/net/core/datagram.c @@ -778,18 +778,21 @@ __poll_t datagram_poll(struct file *file, struct socket *sock, { struct sock *sk = sock->sk; __poll_t mask; + u8 shutdown; sock_poll_wait(file, sock, wait); mask = 0; /* exceptional events? */ - if (sk->sk_err || !skb_queue_empty_lockless(&sk->sk_error_queue)) + if (READ_ONCE(sk->sk_err) || + !skb_queue_empty_lockless(&sk->sk_error_queue)) mask |= EPOLLERR | (sock_flag(sk, SOCK_SELECT_ERR_QUEUE) ? EPOLLPRI : 0); - if (sk->sk_shutdown & RCV_SHUTDOWN) + shutdown = READ_ONCE(sk->sk_shutdown); + if (shutdown & RCV_SHUTDOWN) mask |= EPOLLRDHUP | EPOLLIN | EPOLLRDNORM; - if (sk->sk_shutdown == SHUTDOWN_MASK) + if (shutdown == SHUTDOWN_MASK) mask |= EPOLLHUP; /* readable? */ @@ -798,10 +801,12 @@ __poll_t datagram_poll(struct file *file, struct socket *sock, /* Connection-based need to check for termination and startup */ if (connection_based(sk)) { - if (sk->sk_state == TCP_CLOSE) + int state = READ_ONCE(sk->sk_state); + + if (state == TCP_CLOSE) mask |= EPOLLHUP; /* connection hasn't started yet? */ - if (sk->sk_state == TCP_SYN_SENT) + if (state == TCP_SYN_SENT) return mask; } From 7d17bc2d4e7597d4709d7729f90da3b26fa7e986 Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Tue, 9 May 2023 17:34:55 -0700 Subject: [PATCH 288/755] af_unix: Fix a data race of sk->sk_receive_queue->qlen. [ Upstream commit 679ed006d416ea0cecfe24a99d365d1dea69c683 ] KCSAN found a data race of sk->sk_receive_queue->qlen where recvmsg() updates qlen under the queue lock and sendmsg() checks qlen under unix_state_sock(), not the queue lock, so the reader side needs READ_ONCE(). BUG: KCSAN: data-race in __skb_try_recv_from_queue / unix_wait_for_peer write (marked) to 0xffff888019fe7c68 of 4 bytes by task 49792 on cpu 0: __skb_unlink include/linux/skbuff.h:2347 [inline] __skb_try_recv_from_queue+0x3de/0x470 net/core/datagram.c:197 __skb_try_recv_datagram+0xf7/0x390 net/core/datagram.c:263 __unix_dgram_recvmsg+0x109/0x8a0 net/unix/af_unix.c:2452 unix_dgram_recvmsg+0x94/0xa0 net/unix/af_unix.c:2549 sock_recvmsg_nosec net/socket.c:1019 [inline] ____sys_recvmsg+0x3a3/0x3b0 net/socket.c:2720 ___sys_recvmsg+0xc8/0x150 net/socket.c:2764 do_recvmmsg+0x182/0x560 net/socket.c:2858 __sys_recvmmsg net/socket.c:2937 [inline] __do_sys_recvmmsg net/socket.c:2960 [inline] __se_sys_recvmmsg net/socket.c:2953 [inline] __x64_sys_recvmmsg+0x153/0x170 net/socket.c:2953 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff888019fe7c68 of 4 bytes by task 49793 on cpu 1: skb_queue_len include/linux/skbuff.h:2127 [inline] unix_recvq_full net/unix/af_unix.c:229 [inline] unix_wait_for_peer+0x154/0x1a0 net/unix/af_unix.c:1445 unix_dgram_sendmsg+0x13bc/0x14b0 net/unix/af_unix.c:2048 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0x148/0x160 net/socket.c:747 ____sys_sendmsg+0x20e/0x620 net/socket.c:2503 ___sys_sendmsg+0xc6/0x140 net/socket.c:2557 __sys_sendmmsg+0x11d/0x370 net/socket.c:2643 __do_sys_sendmmsg net/socket.c:2672 [inline] __se_sys_sendmmsg net/socket.c:2669 [inline] __x64_sys_sendmmsg+0x58/0x70 net/socket.c:2669 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x0000000b -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 49793 Comm: syz-executor.0 Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Reviewed-by: Michal Kubiak Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- net/unix/af_unix.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index f33e90bd0683..35a941684f16 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -1227,7 +1227,7 @@ static long unix_wait_for_peer(struct sock *other, long timeo) sched = !sock_flag(other, SOCK_DEAD) && !(other->sk_shutdown & RCV_SHUTDOWN) && - unix_recvq_full(other); + unix_recvq_full_lockless(other); unix_state_unlock(other); From 196528ad484443627779540697f4fb0ef0e01c52 Mon Sep 17 00:00:00 2001 From: Kuniyuki Iwashima Date: Tue, 9 May 2023 17:34:56 -0700 Subject: [PATCH 289/755] af_unix: Fix data races around sk->sk_shutdown. [ Upstream commit e1d09c2c2f5793474556b60f83900e088d0d366d ] KCSAN found a data race around sk->sk_shutdown where unix_release_sock() and unix_shutdown() update it under unix_state_lock(), OTOH unix_poll() and unix_dgram_poll() read it locklessly. We need to annotate the writes and reads with WRITE_ONCE() and READ_ONCE(). BUG: KCSAN: data-race in unix_poll / unix_release_sock write to 0xffff88800d0f8aec of 1 bytes by task 264 on cpu 0: unix_release_sock+0x75c/0x910 net/unix/af_unix.c:631 unix_release+0x59/0x80 net/unix/af_unix.c:1042 __sock_release+0x7d/0x170 net/socket.c:653 sock_close+0x19/0x30 net/socket.c:1397 __fput+0x179/0x5e0 fs/file_table.c:321 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x116/0x1a0 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0x174/0x180 kernel/entry/common.c:204 __syscall_exit_to_user_mode_work kernel/entry/common.c:286 [inline] syscall_exit_to_user_mode+0x1a/0x30 kernel/entry/common.c:297 do_syscall_64+0x4b/0x90 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x72/0xdc read to 0xffff88800d0f8aec of 1 bytes by task 222 on cpu 1: unix_poll+0xa3/0x2a0 net/unix/af_unix.c:3170 sock_poll+0xcf/0x2b0 net/socket.c:1385 vfs_poll include/linux/poll.h:88 [inline] ep_item_poll.isra.0+0x78/0xc0 fs/eventpoll.c:855 ep_send_events fs/eventpoll.c:1694 [inline] ep_poll fs/eventpoll.c:1823 [inline] do_epoll_wait+0x6c4/0xea0 fs/eventpoll.c:2258 __do_sys_epoll_wait fs/eventpoll.c:2270 [inline] __se_sys_epoll_wait fs/eventpoll.c:2265 [inline] __x64_sys_epoll_wait+0xcc/0x190 fs/eventpoll.c:2265 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc value changed: 0x00 -> 0x03 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 222 Comm: dbus-broker Not tainted 6.3.0-rc7-02330-gca6270c12e20 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Fixes: 3c73419c09a5 ("af_unix: fix 'poll for write'/ connected DGRAM sockets") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot Signed-off-by: Kuniyuki Iwashima Reviewed-by: Eric Dumazet Reviewed-by: Michal Kubiak Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- net/unix/af_unix.c | 20 ++++++++++++-------- 1 file changed, 12 insertions(+), 8 deletions(-) diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 35a941684f16..01fd049da104 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -531,7 +531,7 @@ static void unix_release_sock(struct sock *sk, int embrion) /* Clear state */ unix_state_lock(sk); sock_orphan(sk); - sk->sk_shutdown = SHUTDOWN_MASK; + WRITE_ONCE(sk->sk_shutdown, SHUTDOWN_MASK); path = u->path; u->path.dentry = NULL; u->path.mnt = NULL; @@ -549,7 +549,7 @@ static void unix_release_sock(struct sock *sk, int embrion) if (sk->sk_type == SOCK_STREAM || sk->sk_type == SOCK_SEQPACKET) { unix_state_lock(skpair); /* No more writes */ - skpair->sk_shutdown = SHUTDOWN_MASK; + WRITE_ONCE(skpair->sk_shutdown, SHUTDOWN_MASK); if (!skb_queue_empty(&sk->sk_receive_queue) || embrion) skpair->sk_err = ECONNRESET; unix_state_unlock(skpair); @@ -2546,7 +2546,7 @@ static int unix_shutdown(struct socket *sock, int mode) ++mode; unix_state_lock(sk); - sk->sk_shutdown |= mode; + WRITE_ONCE(sk->sk_shutdown, sk->sk_shutdown | mode); other = unix_peer(sk); if (other) sock_hold(other); @@ -2563,7 +2563,7 @@ static int unix_shutdown(struct socket *sock, int mode) if (mode&SEND_SHUTDOWN) peer_mode |= RCV_SHUTDOWN; unix_state_lock(other); - other->sk_shutdown |= peer_mode; + WRITE_ONCE(other->sk_shutdown, other->sk_shutdown | peer_mode); unix_state_unlock(other); other->sk_state_change(other); if (peer_mode == SHUTDOWN_MASK) @@ -2682,16 +2682,18 @@ static __poll_t unix_poll(struct file *file, struct socket *sock, poll_table *wa { struct sock *sk = sock->sk; __poll_t mask; + u8 shutdown; sock_poll_wait(file, sock, wait); mask = 0; + shutdown = READ_ONCE(sk->sk_shutdown); /* exceptional events? */ if (sk->sk_err) mask |= EPOLLERR; - if (sk->sk_shutdown == SHUTDOWN_MASK) + if (shutdown == SHUTDOWN_MASK) mask |= EPOLLHUP; - if (sk->sk_shutdown & RCV_SHUTDOWN) + if (shutdown & RCV_SHUTDOWN) mask |= EPOLLRDHUP | EPOLLIN | EPOLLRDNORM; /* readable? */ @@ -2719,18 +2721,20 @@ static __poll_t unix_dgram_poll(struct file *file, struct socket *sock, struct sock *sk = sock->sk, *other; unsigned int writable; __poll_t mask; + u8 shutdown; sock_poll_wait(file, sock, wait); mask = 0; + shutdown = READ_ONCE(sk->sk_shutdown); /* exceptional events? */ if (sk->sk_err || !skb_queue_empty_lockless(&sk->sk_error_queue)) mask |= EPOLLERR | (sock_flag(sk, SOCK_SELECT_ERR_QUEUE) ? EPOLLPRI : 0); - if (sk->sk_shutdown & RCV_SHUTDOWN) + if (shutdown & RCV_SHUTDOWN) mask |= EPOLLRDHUP | EPOLLIN | EPOLLRDNORM; - if (sk->sk_shutdown == SHUTDOWN_MASK) + if (shutdown == SHUTDOWN_MASK) mask |= EPOLLHUP; /* readable? */ From a75d9211a07fed513c08c5d4861c4a36ac6a74fe Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Tue, 11 Apr 2023 19:57:33 +0900 Subject: [PATCH 290/755] fs: hfsplus: remove WARN_ON() from hfsplus_cat_{read,write}_inode() [ Upstream commit 81b21c0f0138ff5a499eafc3eb0578ad2a99622c ] syzbot is hitting WARN_ON() in hfsplus_cat_{read,write}_inode(), for crafted filesystem image can contain bogus length. There conditions are not kernel bugs that can justify kernel to panic. Reported-by: syzbot Link: https://syzkaller.appspot.com/bug?extid=e2787430e752a92b8750 Reported-by: syzbot Link: https://syzkaller.appspot.com/bug?extid=4913dca2ea6e4d43f3f1 Signed-off-by: Tetsuo Handa Reviewed-by: Viacheslav Dubeyko Message-Id: <15308173-5252-d6a3-ae3b-e96d46cb6f41@I-love.SAKURA.ne.jp> Signed-off-by: Christian Brauner Signed-off-by: Sasha Levin --- fs/hfsplus/inode.c | 28 +++++++++++++++++++++++----- 1 file changed, 23 insertions(+), 5 deletions(-) diff --git a/fs/hfsplus/inode.c b/fs/hfsplus/inode.c index 76501d905099..15c14a6a9f7f 100644 --- a/fs/hfsplus/inode.c +++ b/fs/hfsplus/inode.c @@ -497,7 +497,11 @@ int hfsplus_cat_read_inode(struct inode *inode, struct hfs_find_data *fd) if (type == HFSPLUS_FOLDER) { struct hfsplus_cat_folder *folder = &entry.folder; - WARN_ON(fd->entrylength < sizeof(struct hfsplus_cat_folder)); + if (fd->entrylength < sizeof(struct hfsplus_cat_folder)) { + pr_err("bad catalog folder entry\n"); + res = -EIO; + goto out; + } hfs_bnode_read(fd->bnode, &entry, fd->entryoffset, sizeof(struct hfsplus_cat_folder)); hfsplus_get_perms(inode, &folder->permissions, 1); @@ -517,7 +521,11 @@ int hfsplus_cat_read_inode(struct inode *inode, struct hfs_find_data *fd) } else if (type == HFSPLUS_FILE) { struct hfsplus_cat_file *file = &entry.file; - WARN_ON(fd->entrylength < sizeof(struct hfsplus_cat_file)); + if (fd->entrylength < sizeof(struct hfsplus_cat_file)) { + pr_err("bad catalog file entry\n"); + res = -EIO; + goto out; + } hfs_bnode_read(fd->bnode, &entry, fd->entryoffset, sizeof(struct hfsplus_cat_file)); @@ -548,6 +556,7 @@ int hfsplus_cat_read_inode(struct inode *inode, struct hfs_find_data *fd) pr_err("bad catalog entry used to create inode\n"); res = -EIO; } +out: return res; } @@ -556,6 +565,7 @@ int hfsplus_cat_write_inode(struct inode *inode) struct inode *main_inode = inode; struct hfs_find_data fd; hfsplus_cat_entry entry; + int res = 0; if (HFSPLUS_IS_RSRC(inode)) main_inode = HFSPLUS_I(inode)->rsrc_inode; @@ -574,7 +584,11 @@ int hfsplus_cat_write_inode(struct inode *inode) if (S_ISDIR(main_inode->i_mode)) { struct hfsplus_cat_folder *folder = &entry.folder; - WARN_ON(fd.entrylength < sizeof(struct hfsplus_cat_folder)); + if (fd.entrylength < sizeof(struct hfsplus_cat_folder)) { + pr_err("bad catalog folder entry\n"); + res = -EIO; + goto out; + } hfs_bnode_read(fd.bnode, &entry, fd.entryoffset, sizeof(struct hfsplus_cat_folder)); /* simple node checks? */ @@ -599,7 +613,11 @@ int hfsplus_cat_write_inode(struct inode *inode) } else { struct hfsplus_cat_file *file = &entry.file; - WARN_ON(fd.entrylength < sizeof(struct hfsplus_cat_file)); + if (fd.entrylength < sizeof(struct hfsplus_cat_file)) { + pr_err("bad catalog file entry\n"); + res = -EIO; + goto out; + } hfs_bnode_read(fd.bnode, &entry, fd.entryoffset, sizeof(struct hfsplus_cat_file)); hfsplus_inode_write_fork(inode, &file->data_fork); @@ -620,5 +638,5 @@ int hfsplus_cat_write_inode(struct inode *inode) set_bit(HFSPLUS_I_CAT_DIRTY, &HFSPLUS_I(inode)->flags); out: hfs_find_exit(&fd); - return 0; + return res; } From 9b72cb394f962aeb22f0453523c67ac17100cd73 Mon Sep 17 00:00:00 2001 From: Rodrigo Siqueira Date: Tue, 1 Nov 2022 10:20:09 -0400 Subject: [PATCH 291/755] drm/amd/display: Use DC_LOG_DC in the trasform pixel function [ Upstream commit 7222f5841ff49709ca666b05ff336776e0664a20 ] [Why & How] DC now uses a new commit sequence which is more robust since it addresses cases where we need to reorganize pipes based on planes and other parameters. As a result, this new commit sequence reset the DC state by cleaning plane states and re-creating them accordingly with the need. For this reason, the dce_transform_set_pixel_storage_depth can be invoked after a plane state is destroyed and before its re-creation. In this situation and on DCE devices, DC will hit a condition that will trigger a dmesg log that looks like this: Console: switching to colour frame buffer device 240x67 ------------[ cut here ]------------ [..] Hardware name: System manufacturer System Product Name/PRIME X370-PRO, BIOS 5603 07/28/2020 RIP: 0010:dce_transform_set_pixel_storage_depth+0x3f8/0x480 [amdgpu] [..] RSP: 0018:ffffc9000202b850 EFLAGS: 00010293 RAX: ffffffffa081d100 RBX: ffff888110790000 RCX: 000000000000000c RDX: ffff888100bedbf8 RSI: 0000000000001a50 RDI: ffff88810463c900 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000007 R10: 0000000000000001 R11: 0000000000000f00 R12: ffff88810f500010 R13: ffff888100bedbf8 R14: ffff88810f515688 R15: 0000000000000000 FS: 00007ff0159249c0(0000) GS:ffff88840e940000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ff01528e550 CR3: 0000000002a10000 CR4: 00000000003506e0 Call Trace: ? dm_write_reg_func+0x21/0x80 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] dc_stream_set_dither_option+0xfb/0x130 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_crtc_configure_crc_source+0x10b/0x190 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] amdgpu_dm_atomic_commit_tail+0x20a8/0x2a90 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] ? free_unref_page_commit+0x98/0x170 ? free_unref_page+0xcc/0x150 commit_tail+0x94/0x120 drm_atomic_helper_commit+0x10f/0x140 drm_atomic_commit+0x94/0xc0 ? drm_plane_get_damage_clips.cold+0x1c/0x1c drm_client_modeset_commit_atomic+0x203/0x250 drm_client_modeset_commit_locked+0x56/0x150 drm_client_modeset_commit+0x21/0x40 drm_fb_helper_lastclose+0x42/0x70 amdgpu_driver_lastclose_kms+0xa/0x10 [amdgpu 340dadd3f7c8cf4be11cf0bdc850245e99abe0e8] drm_release+0xda/0x110 __fput+0x89/0x240 task_work_run+0x5c/0x90 do_exit+0x333/0xae0 do_group_exit+0x2d/0x90 __x64_sys_exit_group+0x14/0x20 do_syscall_64+0x5b/0x80 ? exit_to_user_mode_prepare+0x1e/0x140 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7ff016ceaca1 Code: Unable to access opcode bytes at RIP 0x7ff016ceac77. RSP: 002b:00007ffe7a2357e8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 00007ff016e15a00 RCX: 00007ff016ceaca1 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffffffffff78 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ff016e15a00 R13: 0000000000000000 R14: 00007ff016e1aee8 R15: 00007ff016e1af00 Since this issue only happens in a transition state on DC, this commit replace BREAK_TO_DEBUGGER with DC_LOG_DC. Reviewed-by: Harry Wentland Acked-by: Qingqing Zhuo Signed-off-by: Rodrigo Siqueira Tested-by: Daniel Wheeler Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/display/dc/dce/dce_transform.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_transform.c b/drivers/gpu/drm/amd/display/dc/dce/dce_transform.c index 6fd57cfb112f..96fdc18ecb3b 100644 --- a/drivers/gpu/drm/amd/display/dc/dce/dce_transform.c +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_transform.c @@ -778,7 +778,7 @@ static void dce_transform_set_pixel_storage_depth( color_depth = COLOR_DEPTH_101010; pixel_depth = 0; expan_mode = 1; - BREAK_TO_DEBUGGER(); + DC_LOG_DC("The pixel depth %d is not valid, set COLOR_DEPTH_101010 instead.", depth); break; } @@ -792,8 +792,7 @@ static void dce_transform_set_pixel_storage_depth( if (!(xfm_dce->lb_pixel_depth_supported & depth)) { /*we should use unsupported capabilities * unless it is required by w/a*/ - DC_LOG_WARNING("%s: Capability not supported", - __func__); + DC_LOG_DC("%s: Capability not supported", __func__); } } From d73e8c47675e8ca6bae79816b246cb24ed8b32cb Mon Sep 17 00:00:00 2001 From: Alexander Stein Date: Mon, 13 Mar 2023 08:18:11 +0100 Subject: [PATCH 292/755] regmap: cache: Return error in cache sync operations for REGCACHE_NONE [ Upstream commit fd883d79e4dcd2417c2b80756f22a2ff03b0f6e0 ] There is no sense in doing a cache sync on REGCACHE_NONE regmaps. Instead of panicking the kernel due to missing cache_ops, return an error to client driver. Signed-off-by: Alexander Stein Link: https://lore.kernel.org/r/20230313071812.13577-1-alexander.stein@ew.tq-group.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/base/regmap/regcache.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/base/regmap/regcache.c b/drivers/base/regmap/regcache.c index 7f4b3b62492c..7fdd702e564a 100644 --- a/drivers/base/regmap/regcache.c +++ b/drivers/base/regmap/regcache.c @@ -343,6 +343,9 @@ int regcache_sync(struct regmap *map) const char *name; bool bypass; + if (WARN_ON(map->cache_type == REGCACHE_NONE)) + return -EINVAL; + BUG_ON(!map->cache_ops); map->lock(map->lock_arg); @@ -412,6 +415,9 @@ int regcache_sync_region(struct regmap *map, unsigned int min, const char *name; bool bypass; + if (WARN_ON(map->cache_type == REGCACHE_NONE)) + return -EINVAL; + BUG_ON(!map->cache_ops); map->lock(map->lock_arg); From a2a5d3a584bf86c9c09017381a8fc63cfaf5a9e6 Mon Sep 17 00:00:00 2001 From: Zheng Wang Date: Wed, 8 Mar 2023 00:43:38 +0800 Subject: [PATCH 293/755] memstick: r592: Fix UAF bug in r592_remove due to race condition [ Upstream commit 63264422785021704c39b38f65a78ab9e4a186d7 ] In r592_probe, dev->detect_timer was bound with r592_detect_timer. In r592_irq function, the timer function will be invoked by mod_timer. If we remove the module which will call hantro_release to make cleanup, there may be a unfinished work. The possible sequence is as follows, which will cause a typical UAF bug. Fix it by canceling the work before cleanup in r592_remove. CPU0 CPU1 |r592_detect_timer r592_remove | memstick_free_host| put_device; | kfree(host); | | | queue_work | &host->media_checker //use Signed-off-by: Zheng Wang Link: https://lore.kernel.org/r/20230307164338.1246287-1-zyytlz.wz@163.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin --- drivers/memstick/host/r592.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/memstick/host/r592.c b/drivers/memstick/host/r592.c index eaa2a94d18be..dd06c18495eb 100644 --- a/drivers/memstick/host/r592.c +++ b/drivers/memstick/host/r592.c @@ -828,7 +828,7 @@ static void r592_remove(struct pci_dev *pdev) /* Stop the processing thread. That ensures that we won't take any more requests */ kthread_stop(dev->io_thread); - + del_timer_sync(&dev->detect_timer); r592_enable_device(dev, false); while (!error && dev->req) { From 48ac727ea4a3577eb1b4e24f807ba532c47930f9 Mon Sep 17 00:00:00 2001 From: Pierre Gondois Date: Thu, 16 Feb 2023 09:49:19 +0100 Subject: [PATCH 294/755] firmware: arm_sdei: Fix sleep from invalid context BUG [ Upstream commit d2c48b2387eb89e0bf2a2e06e30987cf410acad4 ] Running a preempt-rt (v6.2-rc3-rt1) based kernel on an Ampere Altra triggers: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 0, irqs_disabled(): 128, non_block: 0, pid: 24, name: cpuhp/0 preempt_count: 0, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by cpuhp/0/24: #0: ffffda30217c70d0 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #1: ffffda30217c7120 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x5c/0x248 #2: ffffda3021c711f0 (sdei_list_lock){....}-{3:3}, at: sdei_cpuhp_up+0x3c/0x130 irq event stamp: 36 hardirqs last enabled at (35): [] finish_task_switch+0xb4/0x2b0 hardirqs last disabled at (36): [] cpuhp_thread_fun+0x21c/0x248 softirqs last enabled at (0): [] copy_process+0x63c/0x1ac0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 0 PID: 24 Comm: cpuhp/0 Not tainted 5.19.0-rc3-rt5-[...] Hardware name: WIWYNN Mt.Jade Server [...] Call trace: dump_backtrace+0x114/0x120 show_stack+0x20/0x70 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x228 rt_spin_lock+0x70/0x120 sdei_cpuhp_up+0x3c/0x130 cpuhp_invoke_callback+0x250/0xf08 cpuhp_thread_fun+0x120/0x248 smpboot_thread_fn+0x280/0x320 kthread+0x130/0x140 ret_from_fork+0x10/0x20 sdei_cpuhp_up() is called in the STARTING hotplug section, which runs with interrupts disabled. Use a CPUHP_AP_ONLINE_DYN entry instead to execute the cpuhp cb later, with preemption enabled. SDEI originally got its own cpuhp slot to allow interacting with perf. It got superseded by pNMI and this early slot is not relevant anymore. [1] Some SDEI calls (e.g. SDEI_1_0_FN_SDEI_PE_MASK) take actions on the calling CPU. It is checked that preemption is disabled for them. _ONLINE cpuhp cb are executed in the 'per CPU hotplug thread'. Preemption is enabled in those threads, but their cpumask is limited to 1 CPU. Move 'WARN_ON_ONCE(preemptible())' statements so that SDEI cpuhp cb don't trigger them. Also add a check for the SDEI_1_0_FN_SDEI_PRIVATE_RESET SDEI call which acts on the calling CPU. [1]: https://lore.kernel.org/all/5813b8c5-ae3e-87fd-fccc-94c9cd08816d@arm.com/ Suggested-by: James Morse Signed-off-by: Pierre Gondois Reviewed-by: James Morse Link: https://lore.kernel.org/r/20230216084920.144064-1-pierre.gondois@arm.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin --- drivers/firmware/arm_sdei.c | 37 ++++++++++++++++++++----------------- include/linux/cpuhotplug.h | 1 - 2 files changed, 20 insertions(+), 18 deletions(-) diff --git a/drivers/firmware/arm_sdei.c b/drivers/firmware/arm_sdei.c index e497785cd99f..b0e8752174c6 100644 --- a/drivers/firmware/arm_sdei.c +++ b/drivers/firmware/arm_sdei.c @@ -44,6 +44,8 @@ static asmlinkage void (*sdei_firmware_call)(unsigned long function_id, /* entry point from firmware to arch asm code */ static unsigned long sdei_entry_point; +static int sdei_hp_state; + struct sdei_event { /* These three are protected by the sdei_list_lock */ struct list_head list; @@ -305,8 +307,6 @@ int sdei_mask_local_cpu(void) { int err; - WARN_ON_ONCE(preemptible()); - err = invoke_sdei_fn(SDEI_1_0_FN_SDEI_PE_MASK, 0, 0, 0, 0, 0, NULL); if (err && err != -EIO) { pr_warn_once("failed to mask CPU[%u]: %d\n", @@ -319,6 +319,7 @@ int sdei_mask_local_cpu(void) static void _ipi_mask_cpu(void *ignored) { + WARN_ON_ONCE(preemptible()); sdei_mask_local_cpu(); } @@ -326,8 +327,6 @@ int sdei_unmask_local_cpu(void) { int err; - WARN_ON_ONCE(preemptible()); - err = invoke_sdei_fn(SDEI_1_0_FN_SDEI_PE_UNMASK, 0, 0, 0, 0, 0, NULL); if (err && err != -EIO) { pr_warn_once("failed to unmask CPU[%u]: %d\n", @@ -340,6 +339,7 @@ int sdei_unmask_local_cpu(void) static void _ipi_unmask_cpu(void *ignored) { + WARN_ON_ONCE(preemptible()); sdei_unmask_local_cpu(); } @@ -347,6 +347,8 @@ static void _ipi_private_reset(void *ignored) { int err; + WARN_ON_ONCE(preemptible()); + err = invoke_sdei_fn(SDEI_1_0_FN_SDEI_PRIVATE_RESET, 0, 0, 0, 0, 0, NULL); if (err && err != -EIO) @@ -393,8 +395,6 @@ static void _local_event_enable(void *data) int err; struct sdei_crosscall_args *arg = data; - WARN_ON_ONCE(preemptible()); - err = sdei_api_event_enable(arg->event->event_num); sdei_cross_call_return(arg, err); @@ -485,8 +485,6 @@ static void _local_event_unregister(void *data) int err; struct sdei_crosscall_args *arg = data; - WARN_ON_ONCE(preemptible()); - err = sdei_api_event_unregister(arg->event->event_num); sdei_cross_call_return(arg, err); @@ -575,8 +573,6 @@ static void _local_event_register(void *data) struct sdei_registered_event *reg; struct sdei_crosscall_args *arg = data; - WARN_ON(preemptible()); - reg = per_cpu_ptr(arg->event->private_registered, smp_processor_id()); err = sdei_api_event_register(arg->event->event_num, sdei_entry_point, reg, 0, 0); @@ -756,6 +752,8 @@ static int sdei_pm_notifier(struct notifier_block *nb, unsigned long action, { int rv; + WARN_ON_ONCE(preemptible()); + switch (action) { case CPU_PM_ENTER: rv = sdei_mask_local_cpu(); @@ -804,7 +802,7 @@ static int sdei_device_freeze(struct device *dev) int err; /* unregister private events */ - cpuhp_remove_state(CPUHP_AP_ARM_SDEI_STARTING); + cpuhp_remove_state(sdei_entry_point); err = sdei_unregister_shared(); if (err) @@ -825,12 +823,15 @@ static int sdei_device_thaw(struct device *dev) return err; } - err = cpuhp_setup_state(CPUHP_AP_ARM_SDEI_STARTING, "SDEI", + err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "SDEI", &sdei_cpuhp_up, &sdei_cpuhp_down); - if (err) + if (err < 0) { pr_warn("Failed to re-register CPU hotplug notifier...\n"); + return err; + } - return err; + sdei_hp_state = err; + return 0; } static int sdei_device_restore(struct device *dev) @@ -862,7 +863,7 @@ static int sdei_reboot_notifier(struct notifier_block *nb, unsigned long action, * We are going to reset the interface, after this there is no point * doing work when we take CPUs offline. */ - cpuhp_remove_state(CPUHP_AP_ARM_SDEI_STARTING); + cpuhp_remove_state(sdei_hp_state); sdei_platform_reset(); @@ -1044,13 +1045,15 @@ static int sdei_probe(struct platform_device *pdev) goto remove_cpupm; } - err = cpuhp_setup_state(CPUHP_AP_ARM_SDEI_STARTING, "SDEI", + err = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "SDEI", &sdei_cpuhp_up, &sdei_cpuhp_down); - if (err) { + if (err < 0) { pr_warn("Failed to register CPU hotplug notifier...\n"); goto remove_reboot; } + sdei_hp_state = err; + return 0; remove_reboot: diff --git a/include/linux/cpuhotplug.h b/include/linux/cpuhotplug.h index 15835f37bd5f..8134cc3b99cd 100644 --- a/include/linux/cpuhotplug.h +++ b/include/linux/cpuhotplug.h @@ -111,7 +111,6 @@ enum cpuhp_state { CPUHP_AP_PERF_X86_CSTATE_STARTING, CPUHP_AP_PERF_XTENSA_STARTING, CPUHP_AP_MIPS_OP_LOONGSON3_STARTING, - CPUHP_AP_ARM_SDEI_STARTING, CPUHP_AP_ARM_VFP_STARTING, CPUHP_AP_ARM64_DEBUG_MONITORS_STARTING, CPUHP_AP_PERF_ARM_HW_BREAKPOINT_STARTING, From ccae2233e9935a038a35fe8cfd703df905f700e7 Mon Sep 17 00:00:00 2001 From: Armin Wolf Date: Fri, 24 Mar 2023 21:26:27 +0100 Subject: [PATCH 295/755] ACPI: EC: Fix oops when removing custom query handlers [ Upstream commit e5b492c6bb900fcf9722e05f4a10924410e170c1 ] When removing custom query handlers, the handler might still be used inside the EC query workqueue, causing a kernel oops if the module holding the callback function was already unloaded. Fix this by flushing the EC query workqueue when removing custom query handlers. Tested on a Acer Travelmate 4002WLMi Signed-off-by: Armin Wolf Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin --- drivers/acpi/ec.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index defc5796b508..c7baccd47b89 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -1118,6 +1118,7 @@ static void acpi_ec_remove_query_handlers(struct acpi_ec *ec, void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit) { acpi_ec_remove_query_handlers(ec, false, query_bit); + flush_workqueue(ec_query_wq); } EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler); From 99c8f2e6f33a17a812f3865f23be479aca98b59f Mon Sep 17 00:00:00 2001 From: Nur Hussein Date: Thu, 6 Apr 2023 04:25:59 +0800 Subject: [PATCH 296/755] drm/tegra: Avoid potential 32-bit integer overflow [ Upstream commit 2429b3c529da29d4277d519bd66d034842dcd70c ] In tegra_sor_compute_config(), the 32-bit value mode->clock is multiplied by 1000, and assigned to the u64 variable pclk. We can avoid a potential 32-bit integer overflow by casting mode->clock to u64 before we do the arithmetic and assignment. Signed-off-by: Nur Hussein Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin --- drivers/gpu/drm/tegra/sor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/tegra/sor.c b/drivers/gpu/drm/tegra/sor.c index 0419b6105c8a..ccd084abc8c9 100644 --- a/drivers/gpu/drm/tegra/sor.c +++ b/drivers/gpu/drm/tegra/sor.c @@ -906,7 +906,7 @@ static int tegra_sor_compute_config(struct tegra_sor *sor, struct drm_dp_link *link) { const u64 f = 100000, link_rate = link->rate * 1000; - const u64 pclk = mode->clock * 1000; + const u64 pclk = (u64)mode->clock * 1000; u64 input, output, watermark, num; struct tegra_sor_params params; u32 num_syms_per_line; From 710e09fd116e2fa53e319a416ad4e4f8027682b6 Mon Sep 17 00:00:00 2001 From: Tamir Duberstein Date: Wed, 5 Apr 2023 15:42:43 +0200 Subject: [PATCH 297/755] ACPICA: Avoid undefined behavior: applying zero offset to null pointer [ Upstream commit 05bb0167c80b8f93c6a4e0451b7da9b96db990c2 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 +0x233302 #1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 +0x3d77f #1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 +0x3d77f #1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 +0x3d77f #2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 +0x4196d #3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 +0x4150d #4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 +0x233302 #5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 +0x262369 #6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 +0x2b7fac #7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 +0x2c64d2 #8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 +0x22a052 #9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 +0x293dd8 #10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 +0x2a9e98 #11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 +0x2931ac #12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 +0x2fc40d #13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 +0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: https://github.com/acpica/acpica/commit/770653e3 Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin --- drivers/acpi/acpica/dswstate.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c index de79f835a373..7979d52dfbc9 100644 --- a/drivers/acpi/acpica/dswstate.c +++ b/drivers/acpi/acpica/dswstate.c @@ -576,9 +576,14 @@ acpi_ds_init_aml_walk(struct acpi_walk_state *walk_state, ACPI_FUNCTION_TRACE(ds_init_aml_walk); walk_state->parser_state.aml = - walk_state->parser_state.aml_start = aml_start; - walk_state->parser_state.aml_end = - walk_state->parser_state.pkg_end = aml_start + aml_length; + walk_state->parser_state.aml_start = + walk_state->parser_state.aml_end = + walk_state->parser_state.pkg_end = aml_start; + /* Avoid undefined behavior: applying zero offset to null pointer */ + if (aml_length != 0) { + walk_state->parser_state.aml_end += aml_length; + walk_state->parser_state.pkg_end += aml_length; + } /* The next_op of the next_walk will be the beginning of the method */ From c409eb45f5ddae2e3b3faa76cefc87f3cd0d0e88 Mon Sep 17 00:00:00 2001 From: void0red <30990023+void0red@users.noreply.github.com> Date: Wed, 5 Apr 2023 15:57:57 +0200 Subject: [PATCH 298/755] ACPICA: ACPICA: check null return of ACPI_ALLOCATE_ZEROED in acpi_db_display_objects [ Upstream commit ae5a0eccc85fc960834dd66e3befc2728284b86c ] ACPICA commit 0d5f467d6a0ba852ea3aad68663cbcbd43300fd4 ACPI_ALLOCATE_ZEROED may fails, object_info might be null and will cause null pointer dereference later. Link: https://github.com/acpica/acpica/commit/0d5f467d Signed-off-by: Bob Moore Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin --- drivers/acpi/acpica/dbnames.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/acpi/acpica/dbnames.c b/drivers/acpi/acpica/dbnames.c index 63fe30e86807..7f14403165dd 100644 --- a/drivers/acpi/acpica/dbnames.c +++ b/drivers/acpi/acpica/dbnames.c @@ -571,6 +571,9 @@ acpi_status acpi_db_display_objects(char *obj_type_arg, char *display_count_arg) object_info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_object_info)); + if (!object_info) + return (AE_NO_MEMORY); + /* Walk the namespace from the root */ (void)acpi_walk_namespace(ACPI_TYPE_ANY, ACPI_ROOT_OBJECT, From 56c7e9c39bd54fd753c0c4b1ed10278cbd3a5f02 Mon Sep 17 00:00:00 2001 From: Hector Martin Date: Tue, 14 Feb 2023 18:24:19 +0900 Subject: [PATCH 299/755] wifi: brcmfmac: cfg80211: Pass the PMK in binary instead of hex [ Upstream commit 89b89e52153fda2733562776c7c9d9d3ebf8dd6d ] Apparently the hex passphrase mechanism does not work on newer chips/firmware (e.g. BCM4387). It seems there was a simple way of passing it in binary all along, so use that and avoid the hexification. OpenBSD has been doing it like this from the beginning, so this should work on all chips. Also clear the structure before setting the PMK. This was leaking uninitialized stack contents to the device. Reviewed-by: Linus Walleij Reviewed-by: Arend van Spriel Signed-off-by: Hector Martin Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20230214092423.15175-6-marcan@marcan.st Signed-off-by: Sasha Levin --- .../wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c index 5bfff309f547..b7ceea0b3204 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c @@ -1269,13 +1269,14 @@ static int brcmf_set_pmk(struct brcmf_if *ifp, const u8 *pmk_data, u16 pmk_len) { struct brcmf_pub *drvr = ifp->drvr; struct brcmf_wsec_pmk_le pmk; - int i, err; + int err; - /* convert to firmware key format */ - pmk.key_len = cpu_to_le16(pmk_len << 1); - pmk.flags = cpu_to_le16(BRCMF_WSEC_PASSPHRASE); - for (i = 0; i < pmk_len; i++) - snprintf(&pmk.key[2 * i], 3, "%02x", pmk_data[i]); + memset(&pmk, 0, sizeof(pmk)); + + /* pass pmk directly */ + pmk.key_len = cpu_to_le16(pmk_len); + pmk.flags = cpu_to_le16(0); + memcpy(pmk.key, pmk_data, pmk_len); /* store psk in firmware */ err = brcmf_fil_cmd_data_set(ifp, BRCMF_C_SET_WSEC_PMK, From c4813f858e5c3e4c4659ce95385c1c400c593e1e Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 1 Mar 2023 11:59:39 +0100 Subject: [PATCH 300/755] ext2: Check block size validity during mount [ Upstream commit 62aeb94433fcec80241754b70d0d1836d5926b0a ] Check that log of block size stored in the superblock has sensible value. Otherwise the shift computing the block size can overflow leading to undefined behavior. Reported-by: syzbot+4fec412f59eba8c01b77@syzkaller.appspotmail.com Signed-off-by: Jan Kara Signed-off-by: Sasha Levin --- fs/ext2/ext2.h | 1 + fs/ext2/super.c | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/fs/ext2/ext2.h b/fs/ext2/ext2.h index 10ab238de9a6..a89b43d75905 100644 --- a/fs/ext2/ext2.h +++ b/fs/ext2/ext2.h @@ -177,6 +177,7 @@ static inline struct ext2_sb_info *EXT2_SB(struct super_block *sb) #define EXT2_MIN_BLOCK_SIZE 1024 #define EXT2_MAX_BLOCK_SIZE 4096 #define EXT2_MIN_BLOCK_LOG_SIZE 10 +#define EXT2_MAX_BLOCK_LOG_SIZE 16 #define EXT2_BLOCK_SIZE(s) ((s)->s_blocksize) #define EXT2_ADDR_PER_BLOCK(s) (EXT2_BLOCK_SIZE(s) / sizeof (__u32)) #define EXT2_BLOCK_SIZE_BITS(s) ((s)->s_blocksize_bits) diff --git a/fs/ext2/super.c b/fs/ext2/super.c index 644c83c115bc..6e8e47871fa2 100644 --- a/fs/ext2/super.c +++ b/fs/ext2/super.c @@ -967,6 +967,13 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent) goto failed_mount; } + if (le32_to_cpu(es->s_log_block_size) > + (EXT2_MAX_BLOCK_LOG_SIZE - BLOCK_SIZE_BITS)) { + ext2_msg(sb, KERN_ERR, + "Invalid log block size: %u", + le32_to_cpu(es->s_log_block_size)); + goto failed_mount; + } blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size); if (test_opt(sb, DAX)) { From 644a9d5e22761a41d5005a26996a643da96de962 Mon Sep 17 00:00:00 2001 From: Justin Tee Date: Wed, 1 Mar 2023 15:16:17 -0800 Subject: [PATCH 301/755] scsi: lpfc: Prevent lpfc_debugfs_lockstat_write() buffer overflow [ Upstream commit c6087b82a9146826564a55c5ca0164cac40348f5 ] A static code analysis tool flagged the possibility of buffer overflow when using copy_from_user() for a debugfs entry. Currently, it is possible that copy_from_user() copies more bytes than what would fit in the mybuf char array. Add a min() restriction check between sizeof(mybuf) - 1 and nbytes passed from the userspace buffer to protect against buffer overflow. Link: https://lore.kernel.org/r/20230301231626.9621-2-justintee8345@gmail.com Signed-off-by: Justin Tee Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/lpfc/lpfc_debugfs.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 69551132f304..291fccf02d45 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -2046,6 +2046,7 @@ lpfc_debugfs_lockstat_write(struct file *file, const char __user *buf, char mybuf[64]; char *pbuf; int i; + size_t bsize; /* Protect copy from user */ if (!access_ok(buf, nbytes)) @@ -2053,7 +2054,9 @@ lpfc_debugfs_lockstat_write(struct file *file, const char __user *buf, memset(mybuf, 0, sizeof(mybuf)); - if (copy_from_user(mybuf, buf, nbytes)) + bsize = min(nbytes, (sizeof(mybuf) - 1)); + + if (copy_from_user(mybuf, buf, bsize)) return -EFAULT; pbuf = &mybuf[0]; @@ -2074,7 +2077,7 @@ lpfc_debugfs_lockstat_write(struct file *file, const char __user *buf, qp->lock_conflict.wq_access = 0; } } - return nbytes; + return bsize; } #endif From 92af9cb86ab0265d17da821577da5cfc280badc0 Mon Sep 17 00:00:00 2001 From: Nathan Chancellor Date: Sun, 19 Mar 2023 16:41:08 -0700 Subject: [PATCH 302/755] net: pasemi: Fix return type of pasemi_mac_start_tx() [ Upstream commit c8384d4a51e7cb0e6587f3143f29099f202c5de1 ] With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG), indirect call targets are validated against the expected function pointer prototype to make sure the call target is valid to help mitigate ROP attacks. If they are not identical, there is a failure at run time, which manifests as either a kernel panic or thread getting killed. A warning in clang aims to catch these at compile time, which reveals: drivers/net/ethernet/pasemi/pasemi_mac.c:1665:21: error: incompatible function pointer types initializing 'netdev_tx_t (*)(struct sk_buff *, struct net_device *)' (aka 'enum netdev_tx (*)(struct sk_buff *, struct net_device *)') with an expression of type 'int (struct sk_buff *, struct net_device *)' [-Werror,-Wincompatible-function-pointer-types-strict] .ndo_start_xmit = pasemi_mac_start_tx, ^~~~~~~~~~~~~~~~~~~ 1 error generated. ->ndo_start_xmit() in 'struct net_device_ops' expects a return type of 'netdev_tx_t', not 'int'. Adjust the return type of pasemi_mac_start_tx() to match the prototype's to resolve the warning. While PowerPC does not currently implement support for kCFI, it could in the future, which means this warning becomes a fatal CFI failure at run time. Link: https://github.com/ClangBuiltLinux/linux/issues/1750 Signed-off-by: Nathan Chancellor Reviewed-by: Horatiu Vultur Link: https://lore.kernel.org/r/20230319-pasemi-incompatible-pointer-types-strict-v1-1-1b9459d8aef0@kernel.org Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- drivers/net/ethernet/pasemi/pasemi_mac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/pasemi/pasemi_mac.c b/drivers/net/ethernet/pasemi/pasemi_mac.c index 040a15a828b4..c1d7bd168f1d 100644 --- a/drivers/net/ethernet/pasemi/pasemi_mac.c +++ b/drivers/net/ethernet/pasemi/pasemi_mac.c @@ -1423,7 +1423,7 @@ static void pasemi_mac_queue_csdesc(const struct sk_buff *skb, write_dma_reg(PAS_DMA_TXCHAN_INCR(txring->chan.chno), 2); } -static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev) +static netdev_tx_t pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev) { struct pasemi_mac * const mac = netdev_priv(dev); struct pasemi_mac_txring * const txring = tx_ring(mac); From 67236cf14db381843aa5712c846de9c8972bfb42 Mon Sep 17 00:00:00 2001 From: Nick Child Date: Tue, 21 Mar 2023 10:07:24 -0500 Subject: [PATCH 303/755] net: Catch invalid index in XPS mapping [ Upstream commit 5dd0dfd55baec0742ba8f5625a0dd064aca7db16 ] When setting the XPS value of a TX queue, warn the user once if the index of the queue is greater than the number of allocated TX queues. Previously, this scenario went uncaught. In the best case, it resulted in unnecessary allocations. In the worst case, it resulted in out-of-bounds memory references through calls to `netdev_get_tx_queue( dev, index)`. Therefore, it is important to inform the user but not worth returning an error and risk downing the netdevice. Signed-off-by: Nick Child Reviewed-by: Piotr Raczynski Link: https://lore.kernel.org/r/20230321150725.127229-1-nnac123@linux.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- net/core/dev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/core/dev.c b/net/core/dev.c index c5561c88a836..0cc0809628b0 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2244,6 +2244,8 @@ int __netif_set_xps_queue(struct net_device *dev, const unsigned long *mask, bool active = false; unsigned int nr_ids; + WARN_ON_ONCE(index >= dev->num_tx_queues); + if (dev->num_tc) { /* Do not allow XPS on subordinate device directly */ num_tc = dev->num_tc; From 89f5055f9b0b57c7e7f02e32df95ef401f809b71 Mon Sep 17 00:00:00 2001 From: Dmitry Bogdanov Date: Sat, 18 Mar 2023 20:56:17 -0500 Subject: [PATCH 304/755] scsi: target: iscsit: Free cmds before session free [ Upstream commit d8990b5a4d065f38f35d69bcd627ec5a7f8330ca ] Commands from recovery entries are freed after session has been closed. That leads to use-after-free at command free or NPE with such call trace: Time2Retain timer expired for SID: 1, cleaning up iSCSI session. BUG: kernel NULL pointer dereference, address: 0000000000000140 RIP: 0010:sbitmap_queue_clear+0x3a/0xa0 Call Trace: target_release_cmd_kref+0xd1/0x1f0 [target_core_mod] transport_generic_free_cmd+0xd1/0x180 [target_core_mod] iscsit_free_cmd+0x53/0xd0 [iscsi_target_mod] iscsit_free_connection_recovery_entries+0x29d/0x320 [iscsi_target_mod] iscsit_close_session+0x13a/0x140 [iscsi_target_mod] iscsit_check_post_dataout+0x440/0x440 [iscsi_target_mod] call_timer_fn+0x24/0x140 Move cleanup of recovery enrties to before session freeing. Reported-by: Forza Signed-off-by: Dmitry Bogdanov Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20230319015620.96006-7-michael.christie@oracle.com Reviewed-by: Maurizio Lombardi Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/target/iscsi/iscsi_target.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 8b8afa95fbba..ab2f0ceb1e23 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -4385,6 +4385,9 @@ int iscsit_close_session(struct iscsi_session *sess) iscsit_stop_time2retain_timer(sess); spin_unlock_bh(&se_tpg->session_lock); + if (sess->sess_ops->ErrorRecoveryLevel == 2) + iscsit_free_connection_recovery_entries(sess); + /* * transport_deregister_session_configfs() will clear the * struct se_node_acl->nacl_sess pointer now as a iscsi_np process context @@ -4413,9 +4416,6 @@ int iscsit_close_session(struct iscsi_session *sess) transport_deregister_session(sess->se_sess); - if (sess->sess_ops->ErrorRecoveryLevel == 2) - iscsit_free_connection_recovery_entries(sess); - iscsit_free_all_ooo_cmdsns(sess); spin_lock_bh(&se_tpg->session_lock); From cc2d2b3dbfb0ba57bc027fb7e1121250c50e4000 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Wed, 8 Feb 2023 07:51:02 +0200 Subject: [PATCH 305/755] lib: cpu_rmap: Avoid use after free on rmap->obj array entries [ Upstream commit 4e0473f1060aa49621d40a113afde24818101d37 ] When calling irq_set_affinity_notifier() with NULL at the notify argument, it will cause freeing of the glue pointer in the corresponding array entry but will leave the pointer in the array. A subsequent call to free_irq_cpu_rmap() will try to free this entry again leading to possible use after free. Fix that by setting NULL to the array entry and checking that we have non-zero at the array entry when iterating over the array in free_irq_cpu_rmap(). The current code does not suffer from this since there are no cases where irq_set_affinity_notifier(irq, NULL) (note the NULL passed for the notify arg) is called, followed by a call to free_irq_cpu_rmap() so we don't hit and issue. Subsequent patches in this series excersize this flow, hence the required fix. Cc: Thomas Gleixner Signed-off-by: Eli Cohen Signed-off-by: Saeed Mahameed Reviewed-by: Jacob Keller Signed-off-by: Sasha Levin --- lib/cpu_rmap.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/lib/cpu_rmap.c b/lib/cpu_rmap.c index 075f3788bbe4..920403fa5b0d 100644 --- a/lib/cpu_rmap.c +++ b/lib/cpu_rmap.c @@ -232,7 +232,8 @@ void free_irq_cpu_rmap(struct cpu_rmap *rmap) for (index = 0; index < rmap->used; index++) { glue = rmap->obj[index]; - irq_set_affinity_notifier(glue->notify.irq, NULL); + if (glue) + irq_set_affinity_notifier(glue->notify.irq, NULL); } cpu_rmap_put(rmap); @@ -268,6 +269,7 @@ static void irq_cpu_rmap_release(struct kref *ref) container_of(ref, struct irq_glue, notify.kref); cpu_rmap_put(glue->rmap); + glue->rmap->obj[glue->index] = NULL; kfree(glue); } @@ -297,6 +299,7 @@ int irq_cpu_rmap_add(struct cpu_rmap *rmap, int irq) rc = irq_set_affinity_notifier(irq, &glue->notify); if (rc) { cpu_rmap_put(glue->rmap); + rmap->obj[glue->index] = NULL; kfree(glue); } return rc; From 410e610a96c52a7b41e2ab6c9ca60868d9acecce Mon Sep 17 00:00:00 2001 From: Zheng Wang Date: Sat, 18 Mar 2023 16:16:35 +0800 Subject: [PATCH 306/755] scsi: message: mptlan: Fix use after free bug in mptlan_remove() due to race condition [ Upstream commit f486893288f3e9b171b836f43853a6426515d800 ] mptlan_probe() calls mpt_register_lan_device() which initializes the &priv->post_buckets_task workqueue. A call to mpt_lan_wake_post_buckets_task() will subsequently start the work. During driver unload in mptlan_remove() the following race may occur: CPU0 CPU1 |mpt_lan_post_receive_buckets_work() mptlan_remove() | free_netdev() | kfree(dev); | | | dev->mtu | //use Fix this by finishing the work prior to cleaning up in mptlan_remove(). [mkp: we really should remove mptlan instead of attempting to fix it] Signed-off-by: Zheng Wang Link: https://lore.kernel.org/r/20230318081635.796479-1-zyytlz.wz@163.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/message/fusion/mptlan.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c index ebc00d47abf5..624803a887d8 100644 --- a/drivers/message/fusion/mptlan.c +++ b/drivers/message/fusion/mptlan.c @@ -1430,7 +1430,9 @@ mptlan_remove(struct pci_dev *pdev) { MPT_ADAPTER *ioc = pci_get_drvdata(pdev); struct net_device *dev = ioc->netdev; + struct mpt_lan_priv *priv = netdev_priv(dev); + cancel_delayed_work_sync(&priv->post_buckets_task); if(dev != NULL) { unregister_netdev(dev); free_netdev(dev); From d43b1bdb100531b75b51f98a54a7b1d758b759c9 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Tue, 28 Mar 2023 00:43:16 +0200 Subject: [PATCH 307/755] gfs2: Fix inode height consistency check [ Upstream commit cfcdb5bad34f600aed7613c3c1a5e618111f77b7 ] The maximum allowed height of an inode's metadata tree depends on the filesystem block size; it is lower for bigger-block filesystems. When reading in an inode, make sure that the height doesn't exceed the maximum allowed height. Arrays like sd_heightsize are sized to be big enough for any filesystem block size; they will often be slightly bigger than what's needed for a specific filesystem. Reported-by: syzbot+45d4691b1ed3c48eba05@syzkaller.appspotmail.com Signed-off-by: Andreas Gruenbacher Signed-off-by: Sasha Levin --- fs/gfs2/glops.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c index 69106a1545fa..092223a8b120 100644 --- a/fs/gfs2/glops.c +++ b/fs/gfs2/glops.c @@ -362,6 +362,7 @@ static int inode_go_demote_ok(const struct gfs2_glock *gl) static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf) { + struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode); const struct gfs2_dinode *str = buf; struct timespec64 atime; u16 height, depth; @@ -401,7 +402,7 @@ static int gfs2_dinode_in(struct gfs2_inode *ip, const void *buf) /* i_diskflags and i_eattr must be set before gfs2_set_inode_flags() */ gfs2_set_inode_flags(&ip->i_inode); height = be16_to_cpu(str->di_height); - if (unlikely(height > GFS2_MAX_META_HEIGHT)) + if (unlikely(height > sdp->sd_max_height)) goto corrupt; ip->i_height = (u8)height; From cee78217a7ae72d11c2e21e1a5263b8044489823 Mon Sep 17 00:00:00 2001 From: Kemeng Shi Date: Sat, 4 Mar 2023 01:21:01 +0800 Subject: [PATCH 308/755] ext4: set goal start correctly in ext4_mb_normalize_request [ Upstream commit b07ffe6927c75d99af534d685282ea188d9f71a6 ] We need to set ac_g_ex to notify the goal start used in ext4_mb_find_by_goal. Set ac_g_ex instead of ac_f_ex in ext4_mb_normalize_request. Besides we should assure goal start is in range [first_data_block, blocks_count) as ext4_mb_initialize_context does. [ Added a check to make sure size is less than ar->pright; otherwise we could end up passing an underflowed value of ar->pright - size to ext4_get_group_no_and_offset(), which will trigger a BUG_ON later on. - TYT ] Signed-off-by: Kemeng Shi Reviewed-by: Ritesh Harjani (IBM) Link: https://lore.kernel.org/r/20230303172120.3800725-2-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin --- fs/ext4/mballoc.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index caab9781bee7..bdab18942e30 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3091,6 +3091,7 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac, struct ext4_allocation_request *ar) { struct ext4_sb_info *sbi = EXT4_SB(ac->ac_sb); + struct ext4_super_block *es = sbi->s_es; int bsbits, max; ext4_lblk_t end; loff_t size, start_off; @@ -3271,18 +3272,21 @@ ext4_mb_normalize_request(struct ext4_allocation_context *ac, ac->ac_g_ex.fe_len = EXT4_NUM_B2C(sbi, size); /* define goal start in order to merge */ - if (ar->pright && (ar->lright == (start + size))) { + if (ar->pright && (ar->lright == (start + size)) && + ar->pright >= size && + ar->pright - size >= le32_to_cpu(es->s_first_data_block)) { /* merge to the right */ ext4_get_group_no_and_offset(ac->ac_sb, ar->pright - size, - &ac->ac_f_ex.fe_group, - &ac->ac_f_ex.fe_start); + &ac->ac_g_ex.fe_group, + &ac->ac_g_ex.fe_start); ac->ac_flags |= EXT4_MB_HINT_TRY_GOAL; } - if (ar->pleft && (ar->lleft + 1 == start)) { + if (ar->pleft && (ar->lleft + 1 == start) && + ar->pleft + 1 < ext4_blocks_count(es)) { /* merge to the left */ ext4_get_group_no_and_offset(ac->ac_sb, ar->pleft + 1, - &ac->ac_f_ex.fe_group, - &ac->ac_f_ex.fe_start); + &ac->ac_g_ex.fe_group, + &ac->ac_g_ex.fe_start); ac->ac_flags |= EXT4_MB_HINT_TRY_GOAL; } From 8659c5f4ffaacbe932849b98462c3d635b4eacea Mon Sep 17 00:00:00 2001 From: Ojaswin Mujoo Date: Sat, 25 Mar 2023 13:43:39 +0530 Subject: [PATCH 309/755] ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa() [ Upstream commit 93cdf49f6eca5e23f6546b8f28457b2e6a6961d9 ] When the length of best extent found is less than the length of goal extent we need to make sure that the best extent atleast covers the start of the original request. This is done by adjusting the ac_b_ex.fe_logical (logical start) of the extent. While doing so, the current logic sometimes results in the best extent's logical range overflowing the goal extent. Since this best extent is later added to the inode preallocation list, we have a possibility of introducing overlapping preallocations. This is discussed in detail here [1]. As per Jan's suggestion, to fix this, replace the existing logic with the below logic for adjusting best extent as it keeps fragmentation in check while ensuring logical range of best extent doesn't overflow out of goal extent: 1. Check if best extent can be kept at end of goal range and still cover original start. 2. Else, check if best extent can be kept at start of goal range and still cover original start. 3. Else, keep the best extent at start of original request. Also, add a few extra BUG_ONs that might help catch errors faster. [1] https://lore.kernel.org/r/Y+OGkVvzPN0RMv0O@li-bb2b2a4c-3307-11b2-a85c-8fa5c3a69313.ibm.com Suggested-by: Jan Kara Signed-off-by: Ojaswin Mujoo Reviewed-by: Ritesh Harjani (IBM) Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/f96aca6d415b36d1f90db86c1a8cd7e2e9d7ab0e.1679731817.git.ojaswin@linux.ibm.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin --- fs/ext4/mballoc.c | 49 ++++++++++++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 18 deletions(-) diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index bdab18942e30..92c37fbbabc1 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -3378,6 +3378,7 @@ static void ext4_mb_use_inode_pa(struct ext4_allocation_context *ac, BUG_ON(start < pa->pa_pstart); BUG_ON(end > pa->pa_pstart + EXT4_C2B(sbi, pa->pa_len)); BUG_ON(pa->pa_free < len); + BUG_ON(ac->ac_b_ex.fe_len <= 0); pa->pa_free -= len; mb_debug(1, "use %llu/%u from inode pa %p\n", start, len, pa); @@ -3682,10 +3683,8 @@ ext4_mb_new_inode_pa(struct ext4_allocation_context *ac) return -ENOMEM; if (ac->ac_b_ex.fe_len < ac->ac_g_ex.fe_len) { - int winl; - int wins; - int win; - int offs; + int new_bex_start; + int new_bex_end; /* we can't allocate as much as normalizer wants. * so, found space must get proper lstart @@ -3693,26 +3692,40 @@ ext4_mb_new_inode_pa(struct ext4_allocation_context *ac) BUG_ON(ac->ac_g_ex.fe_logical > ac->ac_o_ex.fe_logical); BUG_ON(ac->ac_g_ex.fe_len < ac->ac_o_ex.fe_len); - /* we're limited by original request in that - * logical block must be covered any way - * winl is window we can move our chunk within */ - winl = ac->ac_o_ex.fe_logical - ac->ac_g_ex.fe_logical; + /* + * Use the below logic for adjusting best extent as it keeps + * fragmentation in check while ensuring logical range of best + * extent doesn't overflow out of goal extent: + * + * 1. Check if best ex can be kept at end of goal and still + * cover original start + * 2. Else, check if best ex can be kept at start of goal and + * still cover original start + * 3. Else, keep the best ex at start of original request. + */ + new_bex_end = ac->ac_g_ex.fe_logical + + EXT4_C2B(sbi, ac->ac_g_ex.fe_len); + new_bex_start = new_bex_end - EXT4_C2B(sbi, ac->ac_b_ex.fe_len); + if (ac->ac_o_ex.fe_logical >= new_bex_start) + goto adjust_bex; - /* also, we should cover whole original request */ - wins = EXT4_C2B(sbi, ac->ac_b_ex.fe_len - ac->ac_o_ex.fe_len); + new_bex_start = ac->ac_g_ex.fe_logical; + new_bex_end = + new_bex_start + EXT4_C2B(sbi, ac->ac_b_ex.fe_len); + if (ac->ac_o_ex.fe_logical < new_bex_end) + goto adjust_bex; - /* the smallest one defines real window */ - win = min(winl, wins); + new_bex_start = ac->ac_o_ex.fe_logical; + new_bex_end = + new_bex_start + EXT4_C2B(sbi, ac->ac_b_ex.fe_len); - offs = ac->ac_o_ex.fe_logical % - EXT4_C2B(sbi, ac->ac_b_ex.fe_len); - if (offs && offs < win) - win = offs; +adjust_bex: + ac->ac_b_ex.fe_logical = new_bex_start; - ac->ac_b_ex.fe_logical = ac->ac_o_ex.fe_logical - - EXT4_NUM_B2C(sbi, win); BUG_ON(ac->ac_o_ex.fe_logical < ac->ac_b_ex.fe_logical); BUG_ON(ac->ac_o_ex.fe_len > ac->ac_b_ex.fe_len); + BUG_ON(new_bex_end > (ac->ac_g_ex.fe_logical + + EXT4_C2B(sbi, ac->ac_g_ex.fe_len))); } /* preallocation can change ac_b_ex, thus we store actually From 4ceedc2f8bdffb82e40b7d1bb912304f8e157cb1 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Mon, 10 Apr 2023 10:12:22 +0800 Subject: [PATCH 310/755] f2fs: fix to drop all dirty pages during umount() if cp_error is set [ Upstream commit c9b3649a934d131151111354bcbb638076f03a30 ] xfstest generic/361 reports a bug as below: f2fs_bug_on(sbi, sbi->fsync_node_num); kernel BUG at fs/f2fs/super.c:1627! RIP: 0010:f2fs_put_super+0x3a8/0x3b0 Call Trace: generic_shutdown_super+0x8c/0x1b0 kill_block_super+0x2b/0x60 kill_f2fs_super+0x87/0x110 deactivate_locked_super+0x39/0x80 deactivate_super+0x46/0x50 cleanup_mnt+0x109/0x170 __cleanup_mnt+0x16/0x20 task_work_run+0x65/0xa0 exit_to_user_mode_prepare+0x175/0x190 syscall_exit_to_user_mode+0x25/0x50 do_syscall_64+0x4c/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc During umount(), if cp_error is set, f2fs_wait_on_all_pages() should not stop waiting all F2FS_WB_CP_DATA pages to be writebacked, otherwise, fsync_node_num can be non-zero after f2fs_wait_on_all_pages() causing this bug. In this case, to avoid deadloop in f2fs_wait_on_all_pages(), it needs to drop all dirty pages rather than redirtying them. Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin --- fs/f2fs/checkpoint.c | 12 ++++++++++-- fs/f2fs/data.c | 3 ++- 2 files changed, 12 insertions(+), 3 deletions(-) diff --git a/fs/f2fs/checkpoint.c b/fs/f2fs/checkpoint.c index 57318010f8e6..84e98dacd452 100644 --- a/fs/f2fs/checkpoint.c +++ b/fs/f2fs/checkpoint.c @@ -306,8 +306,15 @@ static int __f2fs_write_meta_page(struct page *page, trace_f2fs_writepage(page, META); - if (unlikely(f2fs_cp_error(sbi))) + if (unlikely(f2fs_cp_error(sbi))) { + if (is_sbi_flag_set(sbi, SBI_IS_CLOSE)) { + ClearPageUptodate(page); + dec_page_count(sbi, F2FS_DIRTY_META); + unlock_page(page); + return 0; + } goto redirty_out; + } if (unlikely(is_sbi_flag_set(sbi, SBI_POR_DOING))) goto redirty_out; if (wbc->for_reclaim && page->index < GET_SUM_BLOCK(sbi, 0)) @@ -1277,7 +1284,8 @@ void f2fs_wait_on_all_pages(struct f2fs_sb_info *sbi, int type) if (!get_pages(sbi, type)) break; - if (unlikely(f2fs_cp_error(sbi))) + if (unlikely(f2fs_cp_error(sbi) && + !is_sbi_flag_set(sbi, SBI_IS_CLOSE))) break; io_schedule_timeout(HZ/50); diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index 03dffb126d5c..8f78050c935d 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -2130,7 +2130,8 @@ static int __write_data_page(struct page *page, bool *submitted, * don't drop any dirty dentry pages for keeping lastest * directory structure. */ - if (S_ISDIR(inode->i_mode)) + if (S_ISDIR(inode->i_mode) && + !is_sbi_flag_set(sbi, SBI_IS_CLOSE)) goto redirty_out; goto out; } From a7ec2f424f6edad34651137783a0a59eca9aa37e Mon Sep 17 00:00:00 2001 From: Hao Zeng Date: Tue, 11 Apr 2023 16:43:49 +0800 Subject: [PATCH 311/755] samples/bpf: Fix fout leak in hbm's run_bpf_prog [ Upstream commit 23acb14af1914010dd0aae1bbb7fab28bf518b8e ] Fix fout being fopen'ed but then not subsequently fclose'd. In the affected branch, fout is otherwise going out of scope. Signed-off-by: Hao Zeng Signed-off-by: Daniel Borkmann Link: https://lore.kernel.org/bpf/20230411084349.1999628-1-zenghao@kylinos.cn Signed-off-by: Sasha Levin --- samples/bpf/hbm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/samples/bpf/hbm.c b/samples/bpf/hbm.c index e0fbab9bec83..6d6d4e4ea843 100644 --- a/samples/bpf/hbm.c +++ b/samples/bpf/hbm.c @@ -307,6 +307,7 @@ static int run_bpf_prog(char *prog, int cg_id) fout = fopen(fname, "w"); fprintf(fout, "id:%d\n", cg_id); fprintf(fout, "ERROR: Could not lookup queue_stats\n"); + fclose(fout); } else if (stats_flag && qstats.lastPacketTime > qstats.firstPacketTime) { long long delta_us = (qstats.lastPacketTime - From f6f2d16c77f936041b8ac495fceabded4ec6c83c Mon Sep 17 00:00:00 2001 From: Daniel Gabay Date: Thu, 13 Apr 2023 21:40:32 +0300 Subject: [PATCH 312/755] wifi: iwlwifi: pcie: fix possible NULL pointer dereference [ Upstream commit b655b9a9f8467684cfa8906713d33b71ea8c8f54 ] It is possible that iwl_pci_probe() will fail and free the trans, then afterwards iwl_pci_remove() will be called and crash by trying to access trans which is already freed, fix it. iwlwifi 0000:01:00.0: Detected crf-id 0xa5a5a5a2, cnv-id 0xa5a5a5a2 wfpm id 0xa5a5a5a2 iwlwifi 0000:01:00.0: Can't find a correct rfid for crf id 0x5a2 ... BUG: kernel NULL pointer dereference, address: 0000000000000028 ... RIP: 0010:iwl_pci_remove+0x12/0x30 [iwlwifi] pci_device_remove+0x3e/0xb0 device_release_driver_internal+0x103/0x1f0 driver_detach+0x4c/0x90 bus_remove_driver+0x5c/0xd0 driver_unregister+0x31/0x50 pci_unregister_driver+0x40/0x90 iwl_pci_unregister_driver+0x15/0x20 [iwlwifi] __exit_compat+0x9/0x98 [iwlwifi] __x64_sys_delete_module+0x147/0x260 Signed-off-by: Daniel Gabay Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230413213309.082f6e21341b.I0db21d7fa9a828d571ca886713bd0b5d0b6e1e5c@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- drivers/net/wireless/intel/iwlwifi/pcie/drv.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c index f34297fd453c..5153314e8555 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c @@ -1173,6 +1173,9 @@ static void iwl_pci_remove(struct pci_dev *pdev) { struct iwl_trans *trans = pci_get_drvdata(pdev); + if (!trans) + return; + iwl_drv_stop(trans->drv); iwl_trans_pcie_free(trans); From 0ad8dd870aa187d0c21d032bb2c6433559075eec Mon Sep 17 00:00:00 2001 From: Hyunwoo Kim Date: Fri, 14 Apr 2023 13:11:59 +0300 Subject: [PATCH 313/755] wifi: iwlwifi: pcie: Fix integer overflow in iwl_write_to_user_buf [ Upstream commit 58d1b717879bfeabe09b35e41ad667c79933eb2e ] An integer overflow occurs in the iwl_write_to_user_buf() function, which is called by the iwl_dbgfs_monitor_data_read() function. static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count, void *buf, ssize_t *size, ssize_t *bytes_copied) { int buf_size_left = count - *bytes_copied; buf_size_left = buf_size_left - (buf_size_left % sizeof(u32)); if (*size > buf_size_left) *size = buf_size_left; If the user passes a SIZE_MAX value to the "ssize_t count" parameter, the ssize_t count parameter is assigned to "int buf_size_left". Then compare "*size" with "buf_size_left" . Here, "buf_size_left" is a negative number, so "*size" is assigned "buf_size_left" and goes into the third argument of the copy_to_user function, causing a heap overflow. This is not a security vulnerability because iwl_dbgfs_monitor_data_read() is a debugfs operation with 0400 privileges. Signed-off-by: Hyunwoo Kim Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230414130637.2d80ace81532.Iecfba549e0e0be21bbb0324675392e42e75bd5ad@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- drivers/net/wireless/intel/iwlwifi/pcie/trans.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c index 3a93a7b8ba0a..e7b90cf1f28c 100644 --- a/drivers/net/wireless/intel/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/intel/iwlwifi/pcie/trans.c @@ -2832,7 +2832,7 @@ static bool iwl_write_to_user_buf(char __user *user_buf, ssize_t count, void *buf, ssize_t *size, ssize_t *bytes_copied) { - int buf_size_left = count - *bytes_copied; + ssize_t buf_size_left = count - *bytes_copied; buf_size_left = buf_size_left - (buf_size_left % sizeof(u32)); if (*size > buf_size_left) From fa57021262e998e2229d6383b1081638df2fe238 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 18 Apr 2023 15:25:46 +0200 Subject: [PATCH 314/755] wifi: iwlwifi: dvm: Fix memcpy: detected field-spanning write backtrace [ Upstream commit ef16799640865f937719f0771c93be5dca18adc6 ] A received TKIP key may be up to 32 bytes because it may contain MIC rx/tx keys too. These are not used by iwl and copying these over overflows the iwl_keyinfo.key field. Add a check to not copy more data to iwl_keyinfo.key then will fit. This fixes backtraces like this one: memcpy: detected field-spanning write (size 32) of single field "sta_cmd.key.key" at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 (size 16) WARNING: CPU: 1 PID: 946 at drivers/net/wireless/intel/iwlwifi/dvm/sta.c:1103 iwlagn_send_sta_key+0x375/0x390 [iwldvm] Hardware name: Dell Inc. Latitude E6430/0H3MT5, BIOS A21 05/08/2017 RIP: 0010:iwlagn_send_sta_key+0x375/0x390 [iwldvm] Call Trace: iwl_set_dynamic_key+0x1f0/0x220 [iwldvm] iwlagn_mac_set_key+0x1e4/0x280 [iwldvm] drv_set_key+0xa4/0x1b0 [mac80211] ieee80211_key_enable_hw_accel+0xa8/0x2d0 [mac80211] ieee80211_key_replace+0x22d/0x8e0 [mac80211] Link: https://www.alionet.org/index.php?topic=1469.0 Link: https://lore.kernel.org/linux-wireless/20230218191056.never.374-kees@kernel.org/ Link: https://lore.kernel.org/linux-wireless/68760035-7f75-1b23-e355-bfb758a87d83@redhat.com/ Cc: Kees Cook Suggested-by: Johannes Berg Signed-off-by: Hans de Goede Reviewed-by: Kees Cook Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- drivers/net/wireless/intel/iwlwifi/dvm/sta.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/intel/iwlwifi/dvm/sta.c b/drivers/net/wireless/intel/iwlwifi/dvm/sta.c index 51158edce15b..f30fdbedd717 100644 --- a/drivers/net/wireless/intel/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/intel/iwlwifi/dvm/sta.c @@ -1086,6 +1086,7 @@ static int iwlagn_send_sta_key(struct iwl_priv *priv, { __le16 key_flags; struct iwl_addsta_cmd sta_cmd; + size_t to_copy; int i; spin_lock_bh(&priv->sta_lock); @@ -1105,7 +1106,9 @@ static int iwlagn_send_sta_key(struct iwl_priv *priv, sta_cmd.key.tkip_rx_tsc_byte2 = tkip_iv32; for (i = 0; i < 5; i++) sta_cmd.key.tkip_rx_ttak[i] = cpu_to_le16(tkip_p1k[i]); - memcpy(sta_cmd.key.key, keyconf->key, keyconf->keylen); + /* keyconf may contain MIC rx/tx keys which iwl does not use */ + to_copy = min_t(size_t, sizeof(sta_cmd.key.key), keyconf->keylen); + memcpy(sta_cmd.key.key, keyconf->key, to_copy); break; case WLAN_CIPHER_SUITE_WEP104: key_flags |= STA_KEY_FLG_KEY_SIZE_MSK; From 2112c4c47d36bc5aba3ddeb9afedce6ae6a67e7d Mon Sep 17 00:00:00 2001 From: Min Li Date: Mon, 17 Apr 2023 10:27:54 +0800 Subject: [PATCH 315/755] Bluetooth: L2CAP: fix "bad unlock balance" in l2cap_disconnect_rsp [ Upstream commit 25e97f7b1866e6b8503be349eeea44bb52d661ce ] conn->chan_lock isn't acquired before l2cap_get_chan_by_scid, if l2cap_get_chan_by_scid returns NULL, then 'bad unlock balance' is triggered. Reported-by: syzbot+9519d6b5b79cf7787cf3@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000894f5f05f95e9f4d@google.com/ Signed-off-by: Min Li Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin --- net/bluetooth/l2cap_core.c | 1 - 1 file changed, 1 deletion(-) diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 3c559a177761..5f53e75d8302 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -4410,7 +4410,6 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, chan = l2cap_get_chan_by_scid(conn, scid); if (!chan) { - mutex_unlock(&conn->chan_lock); return 0; } From 8a65476dd1cad790ca67ea639be98c14fcd86288 Mon Sep 17 00:00:00 2001 From: Philipp Hortmann Date: Thu, 23 Feb 2023 07:47:21 +0100 Subject: [PATCH 316/755] staging: rtl8192e: Replace macro RTL_PCI_DEVICE with PCI_DEVICE [ Upstream commit fda2093860df4812d69052a8cf4997e53853a340 ] Replace macro RTL_PCI_DEVICE with PCI_DEVICE to get rid of rtl819xp_ops which is empty. Signed-off-by: Philipp Hortmann Link: https://lore.kernel.org/r/8b45ee783fa91196b7c9d6fc840a189496afd2f4.1677133271.git.philipp.g.hortmann@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 6 +++--- drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 5 ----- 2 files changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c index be377e75703b..ca3cea27489b 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c @@ -50,9 +50,9 @@ static const struct rtl819x_ops rtl819xp_ops = { }; static struct pci_device_id rtl8192_pci_id_tbl[] = { - {RTL_PCI_DEVICE(0x10ec, 0x8192, rtl819xp_ops)}, - {RTL_PCI_DEVICE(0x07aa, 0x0044, rtl819xp_ops)}, - {RTL_PCI_DEVICE(0x07aa, 0x0047, rtl819xp_ops)}, + {PCI_DEVICE(0x10ec, 0x8192)}, + {PCI_DEVICE(0x07aa, 0x0044)}, + {PCI_DEVICE(0x07aa, 0x0047)}, {} }; diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h index 736f1a824cd2..7bbd884aa5f1 100644 --- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h @@ -55,11 +55,6 @@ #define IS_HARDWARE_TYPE_8192SE(_priv) \ (((struct r8192_priv *)rtllib_priv(dev))->card_8192 == NIC_8192SE) -#define RTL_PCI_DEVICE(vend, dev, cfg) \ - .vendor = (vend), .device = (dev), \ - .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, \ - .driver_data = (kernel_ulong_t)&(cfg) - #define TOTAL_CAM_ENTRY 32 #define CAM_CONTENT_COUNT 8 From e28f9de2d4d708fcf66ce80a224bd045af303242 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Thu, 2 Mar 2023 14:01:16 +0100 Subject: [PATCH 317/755] HID: logitech-hidpp: Don't use the USB serial for USB devices [ Upstream commit 7ad1fe0da0fa91bf920b79ab05ae97bfabecc4f4 ] For devices that support the 0x0003 feature (Device Information) version 4, set the serial based on the output of that feature, rather than relying on the usbhid code setting the USB serial. This should allow the serial when connected through USB to (nearly) match the one when connected through a unifying receiver. For example, on the serials on a G903 wired/wireless mouse: - Unifying: 4067-e8-ce-cd-45 - USB before patch: 017C385C3837 - USB after patch: c086-e8-ce-cd-45 Signed-off-by: Bastien Nocera Link: https://lore.kernel.org/r/20230302130117.3975-1-hadess@hadess.net Signed-off-by: Benjamin Tissoires Signed-off-by: Sasha Levin --- drivers/hid/hid-logitech-hidpp.c | 51 ++++++++++++++++++++++++++++++++ 1 file changed, 51 insertions(+) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 919551ed5809..2fd64361884c 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -903,6 +903,55 @@ print_version: return 0; } +/* -------------------------------------------------------------------------- */ +/* 0x0003: Device Information */ +/* -------------------------------------------------------------------------- */ + +#define HIDPP_PAGE_DEVICE_INFORMATION 0x0003 + +#define CMD_GET_DEVICE_INFO 0x00 + +static int hidpp_get_serial(struct hidpp_device *hidpp, u32 *serial) +{ + struct hidpp_report response; + u8 feature_type; + u8 feature_index; + int ret; + + ret = hidpp_root_get_feature(hidpp, HIDPP_PAGE_DEVICE_INFORMATION, + &feature_index, + &feature_type); + if (ret) + return ret; + + ret = hidpp_send_fap_command_sync(hidpp, feature_index, + CMD_GET_DEVICE_INFO, + NULL, 0, &response); + if (ret) + return ret; + + /* See hidpp_unifying_get_serial() */ + *serial = *((u32 *)&response.rap.params[1]); + return 0; +} + +static int hidpp_serial_init(struct hidpp_device *hidpp) +{ + struct hid_device *hdev = hidpp->hid_dev; + u32 serial; + int ret; + + ret = hidpp_get_serial(hidpp, &serial); + if (ret) + return ret; + + snprintf(hdev->uniq, sizeof(hdev->uniq), "%04x-%4phD", + hdev->product, &serial); + dbg_hid("HID++ DeviceInformation: Got serial: %s\n", hdev->uniq); + + return 0; +} + /* -------------------------------------------------------------------------- */ /* 0x0005: GetDeviceNameType */ /* -------------------------------------------------------------------------- */ @@ -3651,6 +3700,8 @@ static int hidpp_probe(struct hid_device *hdev, const struct hid_device_id *id) if (hidpp->quirks & HIDPP_QUIRK_UNIFYING) hidpp_unifying_init(hidpp); + else if (hid_is_usb(hidpp->hid_dev)) + hidpp_serial_init(hidpp); connected = hidpp_root_get_protocol_version(hidpp) == 0; atomic_set(&hidpp->connected, connected); From bf80dbd5289918bfb9c03ca5a9fb81e1d7b67a31 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Thu, 2 Mar 2023 14:01:17 +0100 Subject: [PATCH 318/755] HID: logitech-hidpp: Reconcile USB and Unifying serials [ Upstream commit 5b3691d15e04b6d5a32c915577b8dbc5cfb56382 ] Now that USB HID++ devices can gather a serial number that matches the one that would be gathered when connected through a Unifying receiver, remove the last difference by dropping the product ID as devices usually have different product IDs when connected through USB or Unifying. For example, on the serials on a G903 wired/wireless mouse: - Unifying before patch: 4067-e8-ce-cd-45 - USB before patch: c086-e8-ce-cd-45 - Unifying and USB after patch: e8-ce-cd-45 Signed-off-by: Bastien Nocera Link: https://lore.kernel.org/r/20230302130117.3975-2-hadess@hadess.net Signed-off-by: Benjamin Tissoires Signed-off-by: Sasha Levin --- drivers/hid/hid-logitech-hidpp.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c index 2fd64361884c..b8558292801e 100644 --- a/drivers/hid/hid-logitech-hidpp.c +++ b/drivers/hid/hid-logitech-hidpp.c @@ -809,8 +809,7 @@ static int hidpp_unifying_init(struct hidpp_device *hidpp) if (ret) return ret; - snprintf(hdev->uniq, sizeof(hdev->uniq), "%04x-%4phD", - hdev->product, &serial); + snprintf(hdev->uniq, sizeof(hdev->uniq), "%4phD", &serial); dbg_hid("HID++ Unifying: Got serial: %s\n", hdev->uniq); name = hidpp_unifying_get_name(hidpp); @@ -945,8 +944,7 @@ static int hidpp_serial_init(struct hidpp_device *hidpp) if (ret) return ret; - snprintf(hdev->uniq, sizeof(hdev->uniq), "%04x-%4phD", - hdev->product, &serial); + snprintf(hdev->uniq, sizeof(hdev->uniq), "%4phD", &serial); dbg_hid("HID++ DeviceInformation: Got serial: %s\n", hdev->uniq); return 0; From d3f32dc2ccc25668abc8d121f06ca3c4b19cf1b1 Mon Sep 17 00:00:00 2001 From: Kevin Groeneveld Date: Sat, 18 Mar 2023 18:21:32 -0400 Subject: [PATCH 319/755] spi: spi-imx: fix MX51_ECSPI_* macros when cs > 3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 87c614175bbf28d3fd076dc2d166bac759e41427 ] When using gpio based chip select the cs value can go outside the range 0 – 3. The various MX51_ECSPI_* macros did not take this into consideration resulting in possible corruption of the configuration. For example for any cs value over 3 the SCLKPHA bits would not be set and other values in the register possibly corrupted. One way to fix this is to just mask the cs bits to 2 bits. This still allows all 4 native chip selects to work as well as gpio chip selects (which can use any of the 4 chip select configurations). Signed-off-by: Kevin Groeneveld Link: https://lore.kernel.org/r/20230318222132.3373-1-kgroeneveld@lenbrook.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/spi-imx.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-) diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 9d593675257e..67f31183c118 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -239,6 +239,18 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, return true; } +/* + * Note the number of natively supported chip selects for MX51 is 4. Some + * devices may have less actual SS pins but the register map supports 4. When + * using gpio chip selects the cs values passed into the macros below can go + * outside the range 0 - 3. We therefore need to limit the cs value to avoid + * corrupting bits outside the allocated locations. + * + * The simplest way to do this is to just mask the cs bits to 2 bits. This + * still allows all 4 native chip selects to work as well as gpio chip selects + * (which can use any of the 4 chip select configurations). + */ + #define MX51_ECSPI_CTRL 0x08 #define MX51_ECSPI_CTRL_ENABLE (1 << 0) #define MX51_ECSPI_CTRL_XCH (1 << 2) @@ -247,16 +259,16 @@ static bool spi_imx_can_dma(struct spi_master *master, struct spi_device *spi, #define MX51_ECSPI_CTRL_DRCTL(drctl) ((drctl) << 16) #define MX51_ECSPI_CTRL_POSTDIV_OFFSET 8 #define MX51_ECSPI_CTRL_PREDIV_OFFSET 12 -#define MX51_ECSPI_CTRL_CS(cs) ((cs) << 18) +#define MX51_ECSPI_CTRL_CS(cs) ((cs & 3) << 18) #define MX51_ECSPI_CTRL_BL_OFFSET 20 #define MX51_ECSPI_CTRL_BL_MASK (0xfff << 20) #define MX51_ECSPI_CONFIG 0x0c -#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0)) -#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4)) -#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8)) -#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs) + 12)) -#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs) + 20)) +#define MX51_ECSPI_CONFIG_SCLKPHA(cs) (1 << ((cs & 3) + 0)) +#define MX51_ECSPI_CONFIG_SCLKPOL(cs) (1 << ((cs & 3) + 4)) +#define MX51_ECSPI_CONFIG_SBBCTRL(cs) (1 << ((cs & 3) + 8)) +#define MX51_ECSPI_CONFIG_SSBPOL(cs) (1 << ((cs & 3) + 12)) +#define MX51_ECSPI_CONFIG_SCLKCTL(cs) (1 << ((cs & 3) + 20)) #define MX51_ECSPI_INT 0x10 #define MX51_ECSPI_INT_TEEN (1 << 0) From c5405c767173b18ee676dd0c214266d9f17df2c9 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Thu, 13 Apr 2023 11:17:43 -0700 Subject: [PATCH 320/755] HID: wacom: generic: Set battery quirk only when we see battery data [ Upstream commit bea407a427baa019758f29f4d31b26f008bb8cc6 ] Some devices will include battery status usages in the HID descriptor but we won't see that battery data for one reason or another. For example, AES sensors won't send battery data unless an AES pen is in proximity. If a user does not have an AES pen but instead only interacts with the AES touchscreen with their fingers then there is no need for us to create a battery object. Similarly, if a family of peripherals shares the same HID descriptor between wired-only and wireless-capable SKUs, users of the former may never see a battery event and will not want a power_supply object created. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217062 Link: https://gitlab.gnome.org/GNOME/gnome-control-center/-/issues/2354 Signed-off-by: Jason Gerecke Tested-by: Mario Limonciello Signed-off-by: Jiri Kosina Signed-off-by: Sasha Levin --- drivers/hid/wacom_wac.c | 33 +++++++++++---------------------- 1 file changed, 11 insertions(+), 22 deletions(-) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 339bc7f1fced..819e6d2ca2f3 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -1927,18 +1927,7 @@ static void wacom_map_usage(struct input_dev *input, struct hid_usage *usage, static void wacom_wac_battery_usage_mapping(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage) { - struct wacom *wacom = hid_get_drvdata(hdev); - struct wacom_wac *wacom_wac = &wacom->wacom_wac; - struct wacom_features *features = &wacom_wac->features; - unsigned equivalent_usage = wacom_equivalent_usage(usage->hid); - - switch (equivalent_usage) { - case HID_DG_BATTERYSTRENGTH: - case WACOM_HID_WD_BATTERY_LEVEL: - case WACOM_HID_WD_BATTERY_CHARGING: - features->quirks |= WACOM_QUIRK_BATTERY; - break; - } + return; } static void wacom_wac_battery_event(struct hid_device *hdev, struct hid_field *field, @@ -1959,18 +1948,21 @@ static void wacom_wac_battery_event(struct hid_device *hdev, struct hid_field *f wacom_wac->hid_data.bat_connected = 1; wacom_wac->hid_data.bat_status = WACOM_POWER_SUPPLY_STATUS_AUTO; } + wacom_wac->features.quirks |= WACOM_QUIRK_BATTERY; break; case WACOM_HID_WD_BATTERY_LEVEL: value = value * 100 / (field->logical_maximum - field->logical_minimum); wacom_wac->hid_data.battery_capacity = value; wacom_wac->hid_data.bat_connected = 1; wacom_wac->hid_data.bat_status = WACOM_POWER_SUPPLY_STATUS_AUTO; + wacom_wac->features.quirks |= WACOM_QUIRK_BATTERY; break; case WACOM_HID_WD_BATTERY_CHARGING: wacom_wac->hid_data.bat_charging = value; wacom_wac->hid_data.ps_connected = value; wacom_wac->hid_data.bat_connected = 1; wacom_wac->hid_data.bat_status = WACOM_POWER_SUPPLY_STATUS_AUTO; + wacom_wac->features.quirks |= WACOM_QUIRK_BATTERY; break; } } @@ -1986,18 +1978,15 @@ static void wacom_wac_battery_report(struct hid_device *hdev, { struct wacom *wacom = hid_get_drvdata(hdev); struct wacom_wac *wacom_wac = &wacom->wacom_wac; - struct wacom_features *features = &wacom_wac->features; - if (features->quirks & WACOM_QUIRK_BATTERY) { - int status = wacom_wac->hid_data.bat_status; - int capacity = wacom_wac->hid_data.battery_capacity; - bool charging = wacom_wac->hid_data.bat_charging; - bool connected = wacom_wac->hid_data.bat_connected; - bool powered = wacom_wac->hid_data.ps_connected; + int status = wacom_wac->hid_data.bat_status; + int capacity = wacom_wac->hid_data.battery_capacity; + bool charging = wacom_wac->hid_data.bat_charging; + bool connected = wacom_wac->hid_data.bat_connected; + bool powered = wacom_wac->hid_data.ps_connected; - wacom_notify_battery(wacom_wac, status, capacity, charging, - connected, powered); - } + wacom_notify_battery(wacom_wac, status, capacity, charging, + connected, powered); } static void wacom_wac_pad_usage_mapping(struct hid_device *hdev, From ccb12585a735bde66b45821c283bdb72e7d59bae Mon Sep 17 00:00:00 2001 From: Frank Wang Date: Thu, 16 Mar 2023 16:11:49 +0800 Subject: [PATCH 321/755] usb: typec: tcpm: fix multiple times discover svids error [ Upstream commit dac3b192107b978198e89ec0f77375738352e0c8 ] PD3.0 Spec 6.4.4.3.2 say that only Responder supports 12 or more SVIDs, the Discover SVIDs Command Shall be executed multiple times until a Discover SVIDs VDO is returned ending either with a SVID value of 0x0000 in the last part of the last VDO or with a VDO containing two SVIDs with values of 0x0000. In the current implementation, if the last VDO does not find that the Discover SVIDs Command would be executed multiple times even if the Responder SVIDs are less than 12, and we found some odd dockers just meet this case. So fix it. Acked-by: Heikki Krogerus Signed-off-by: Frank Wang Link: https://lore.kernel.org/r/20230316081149.24519-1-frank.wang@rock-chips.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/typec/tcpm/tcpm.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index fb18264b702e..b259a4a28f81 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -1018,7 +1018,21 @@ static bool svdm_consume_svids(struct tcpm_port *port, const __le32 *payload, pmdata->svids[pmdata->nsvids++] = svid; tcpm_log(port, "SVID %d: 0x%x", pmdata->nsvids, svid); } - return true; + + /* + * PD3.0 Spec 6.4.4.3.2: The SVIDs are returned 2 per VDO (see Table + * 6-43), and can be returned maximum 6 VDOs per response (see Figure + * 6-19). If the Respondersupports 12 or more SVID then the Discover + * SVIDs Command Shall be executed multiple times until a Discover + * SVIDs VDO is returned ending either with a SVID value of 0x0000 in + * the last part of the last VDO or with a VDO containing two SVIDs + * with values of 0x0000. + * + * However, some odd dockers support SVIDs less than 12 but without + * 0x0000 in the last VDO, so we need to break the Discover SVIDs + * request and return false here. + */ + return cnt == 7; abort: tcpm_log(port, "SVID_DISCOVERY_MAX(%d) too low!", SVID_DISCOVERY_MAX); return false; From d5cd2928d31042a7c0a01464f9a8d95be736421d Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 18 Apr 2023 13:14:06 +0300 Subject: [PATCH 322/755] serial: 8250: Reinit port->pm on port specific driver unbind [ Upstream commit 04e82793f068d2f0ffe62fcea03d007a8cdc16a7 ] When we unbind a serial port hardware specific 8250 driver, the generic serial8250 driver takes over the port. After that we see an oops about 10 seconds later. This can produce the following at least on some TI SoCs: Unhandled fault: imprecise external abort (0x1406) Internal error: : 1406 [#1] SMP ARM Turns out that we may still have the serial port hardware specific driver port->pm in use, and serial8250_pm() tries to call it after the port specific driver is gone: serial8250_pm [8250_base] from uart_change_pm+0x54/0x8c [serial_base] uart_change_pm [serial_base] from uart_hangup+0x154/0x198 [serial_base] uart_hangup [serial_base] from __tty_hangup.part.0+0x328/0x37c __tty_hangup.part.0 from disassociate_ctty+0x154/0x20c disassociate_ctty from do_exit+0x744/0xaac do_exit from do_group_exit+0x40/0x8c do_group_exit from __wake_up_parent+0x0/0x1c Let's fix the issue by calling serial8250_set_defaults() in serial8250_unregister_port(). This will set the port back to using the serial8250 default functions, and sets the port->pm to point to serial8250_pm. Signed-off-by: Tony Lindgren Link: https://lore.kernel.org/r/20230418101407.12403-1-tony@atomide.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/8250/8250_core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 2675771a03a0..d7afff1e7685 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -1138,6 +1138,7 @@ void serial8250_unregister_port(int line) uart->port.type = PORT_UNKNOWN; uart->port.dev = &serial8250_isa_devs->dev; uart->capabilities = 0; + serial8250_init_port(uart); serial8250_apply_quirks(uart); uart_add_one_port(&serial8250_reg, &uart->port); } else { From cbe3063a9be1a0b3ce33ecdd2bebd13950043e29 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rodr=C3=ADguez=20Barbarin=2C=20Jos=C3=A9=20Javier?= Date: Tue, 11 Apr 2023 10:33:28 +0200 Subject: [PATCH 323/755] mcb-pci: Reallocate memory region to avoid memory overlapping [ Upstream commit 9be24faadd085c284890c3afcec7a0184642315a ] mcb-pci requests a fixed-size memory region to parse the chameleon table, however, if the chameleon table is smaller that the allocated region, it could overlap with the IP Cores' memory regions. After parsing the chameleon table, drop/reallocate the memory region with the actual chameleon table size. Co-developed-by: Jorge Sanjuan Garcia Signed-off-by: Jorge Sanjuan Garcia Signed-off-by: Javier Rodriguez Signed-off-by: Johannes Thumshirn Link: https://lore.kernel.org/r/20230411083329.4506-3-jth@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/mcb/mcb-pci.c | 27 +++++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/mcb/mcb-pci.c b/drivers/mcb/mcb-pci.c index 14866aa22f75..22927c80ff46 100644 --- a/drivers/mcb/mcb-pci.c +++ b/drivers/mcb/mcb-pci.c @@ -31,7 +31,7 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct resource *res; struct priv *priv; - int ret; + int ret, table_size; unsigned long flags; priv = devm_kzalloc(&pdev->dev, sizeof(struct priv), GFP_KERNEL); @@ -90,7 +90,30 @@ static int mcb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) if (ret < 0) goto out_mcb_bus; - dev_dbg(&pdev->dev, "Found %d cells\n", ret); + table_size = ret; + + if (table_size < CHAM_HEADER_SIZE) { + /* Release the previous resources */ + devm_iounmap(&pdev->dev, priv->base); + devm_release_mem_region(&pdev->dev, priv->mapbase, CHAM_HEADER_SIZE); + + /* Then, allocate it again with the actual chameleon table size */ + res = devm_request_mem_region(&pdev->dev, priv->mapbase, + table_size, + KBUILD_MODNAME); + if (!res) { + dev_err(&pdev->dev, "Failed to request PCI memory\n"); + ret = -EBUSY; + goto out_mcb_bus; + } + + priv->base = devm_ioremap(&pdev->dev, priv->mapbase, table_size); + if (!priv->base) { + dev_err(&pdev->dev, "Cannot ioremap\n"); + ret = -ENOMEM; + goto out_mcb_bus; + } + } mcb_bus_add_devices(priv->bus); From 38a118fd545b011d52d9785b1951c51769509eb8 Mon Sep 17 00:00:00 2001 From: Josh Poimboeuf Date: Wed, 12 Apr 2023 10:24:07 -0700 Subject: [PATCH 324/755] sched: Fix KCSAN noinstr violation [ Upstream commit e0b081d17a9f4e5c0cbb0e5fbeb1abe3de0f7e4e ] With KCSAN enabled, end_of_stack() can get out-of-lined. Force it inline. Fixes the following warnings: vmlinux.o: warning: objtool: check_stackleak_irqoff+0x2b: call to end_of_stack() leaves .noinstr.text section Signed-off-by: Josh Poimboeuf Signed-off-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/r/cc1b4d73d3a428a00d206242a68fdf99a934ca7b.1681320026.git.jpoimboe@kernel.org Signed-off-by: Sasha Levin --- include/linux/sched/task_stack.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/sched/task_stack.h b/include/linux/sched/task_stack.h index 1009b6b5ce40..879a5c8f930b 100644 --- a/include/linux/sched/task_stack.h +++ b/include/linux/sched/task_stack.h @@ -23,7 +23,7 @@ static __always_inline void *task_stack_page(const struct task_struct *task) #define setup_thread_stack(new,old) do { } while(0) -static inline unsigned long *end_of_stack(const struct task_struct *task) +static __always_inline unsigned long *end_of_stack(const struct task_struct *task) { #ifdef CONFIG_STACK_GROWSUP return (unsigned long *)((unsigned long)task->stack + THREAD_SIZE) - 1; From 3ed95a6f6c646e8bb15c354536e0ab10e8f39c08 Mon Sep 17 00:00:00 2001 From: Hao Zeng Date: Wed, 26 Apr 2023 09:05:27 +0800 Subject: [PATCH 325/755] recordmcount: Fix memory leaks in the uwrite function [ Upstream commit fa359d068574d29e7d2f0fdd0ebe4c6a12b5cfb9 ] Common realloc mistake: 'file_append' nulled but not freed upon failure Link: https://lkml.kernel.org/r/20230426010527.703093-1-zenghao@kylinos.cn Signed-off-by: Hao Zeng Suggested-by: Steven Rostedt Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin --- scripts/recordmcount.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/scripts/recordmcount.c b/scripts/recordmcount.c index cce12e1971d8..ec692af8ce9e 100644 --- a/scripts/recordmcount.c +++ b/scripts/recordmcount.c @@ -102,6 +102,7 @@ static ssize_t uwrite(void const *const buf, size_t const count) { size_t cnt = count; off_t idx = 0; + void *p = NULL; file_updated = 1; @@ -109,7 +110,10 @@ static ssize_t uwrite(void const *const buf, size_t const count) off_t aoffset = (file_ptr + count) - file_end; if (aoffset > file_append_size) { - file_append = realloc(file_append, aoffset); + p = realloc(file_append, aoffset); + if (!p) + free(file_append); + file_append = p; file_append_size = aoffset; } if (!file_append) { From c23e6383d7feb96d30fda01b3a8bd6782b43574e Mon Sep 17 00:00:00 2001 From: "Gustavo A. R. Silva" Date: Tue, 21 Mar 2023 17:47:03 -0600 Subject: [PATCH 326/755] RDMA/core: Fix multiple -Warray-bounds warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit aa4d540b4150052ae3b36d286b9c833a961ce291 ] GCC-13 (and Clang)[1] does not like to access a partially allocated object, since it cannot reason about it for bounds checking. In this case 140 bytes are allocated for an object of type struct ib_umad_packet: packet = kzalloc(sizeof(*packet) + IB_MGMT_RMPP_HDR, GFP_KERNEL); However, notice that sizeof(*packet) is only 104 bytes: struct ib_umad_packet { struct ib_mad_send_buf * msg; /* 0 8 */ struct ib_mad_recv_wc * recv_wc; /* 8 8 */ struct list_head list; /* 16 16 */ int length; /* 32 4 */ /* XXX 4 bytes hole, try to pack */ struct ib_user_mad mad __attribute__((__aligned__(8))); /* 40 64 */ /* size: 104, cachelines: 2, members: 5 */ /* sum members: 100, holes: 1, sum holes: 4 */ /* forced alignments: 1, forced holes: 1, sum forced holes: 4 */ /* last cacheline: 40 bytes */ } __attribute__((__aligned__(8))); and 36 bytes extra bytes are allocated for a flexible-array member in struct ib_user_mad: include/rdma/ib_mad.h: 120 enum { ... 123 IB_MGMT_RMPP_HDR = 36, ... } struct ib_user_mad { struct ib_user_mad_hdr hdr; /* 0 64 */ /* --- cacheline 1 boundary (64 bytes) --- */ __u64 data[] __attribute__((__aligned__(8))); /* 64 0 */ /* size: 64, cachelines: 1, members: 2 */ /* forced alignments: 1 */ } __attribute__((__aligned__(8))); So we have sizeof(*packet) + IB_MGMT_RMPP_HDR == 140 bytes Then the address of the flex-array member (for which only 36 bytes were allocated) is casted and copied into a pointer to struct ib_rmpp_mad, which, in turn, is of size 256 bytes: rmpp_mad = (struct ib_rmpp_mad *) packet->mad.data; struct ib_rmpp_mad { struct ib_mad_hdr mad_hdr; /* 0 24 */ struct ib_rmpp_hdr rmpp_hdr; /* 24 12 */ u8 data[220]; /* 36 220 */ /* size: 256, cachelines: 4, members: 3 */ }; The thing is that those 36 bytes allocated for flex-array member data in struct ib_user_mad onlly account for the size of both struct ib_mad_hdr and struct ib_rmpp_hdr, but nothing is left for array u8 data[220]. So, the compiler is legitimately complaining about accessing an object for which not enough memory was allocated. Apparently, the only members of struct ib_rmpp_mad that are relevant (that are actually being used) in function ib_umad_write() are mad_hdr and rmpp_hdr. So, instead of casting packet->mad.data to (struct ib_rmpp_mad *) create a new structure struct ib_rmpp_mad_hdr { struct ib_mad_hdr mad_hdr; struct ib_rmpp_hdr rmpp_hdr; } __packed; and cast packet->mad.data to (struct ib_rmpp_mad_hdr *). Notice that IB_MGMT_RMPP_HDR == sizeof(struct ib_rmpp_mad_hdr) == 36 bytes Refactor the rest of the code, accordingly. Fix the following warnings seen under GCC-13 and -Warray-bounds: drivers/infiniband/core/user_mad.c:564:50: warning: array subscript ‘struct ib_rmpp_mad[0]’ is partly outside array bounds of ‘unsigned char[140]’ [-Warray-bounds=] drivers/infiniband/core/user_mad.c:566:42: warning: array subscript ‘struct ib_rmpp_mad[0]’ is partly outside array bounds of ‘unsigned char[140]’ [-Warray-bounds=] drivers/infiniband/core/user_mad.c:618:25: warning: array subscript ‘struct ib_rmpp_mad[0]’ is partly outside array bounds of ‘unsigned char[140]’ [-Warray-bounds=] drivers/infiniband/core/user_mad.c:622:44: warning: array subscript ‘struct ib_rmpp_mad[0]’ is partly outside array bounds of ‘unsigned char[140]’ [-Warray-bounds=] Link: https://github.com/KSPP/linux/issues/273 Link: https://godbolt.org/z/oYWaGM4Yb [1] Signed-off-by: Gustavo A. R. Silva Link: https://lore.kernel.org/r/ZBpB91qQcB10m3Fw@work Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin --- drivers/infiniband/core/user_mad.c | 23 ++++++++++++++--------- 1 file changed, 14 insertions(+), 9 deletions(-) diff --git a/drivers/infiniband/core/user_mad.c b/drivers/infiniband/core/user_mad.c index ad3a092b8b5c..390123f87658 100644 --- a/drivers/infiniband/core/user_mad.c +++ b/drivers/infiniband/core/user_mad.c @@ -131,6 +131,11 @@ struct ib_umad_packet { struct ib_user_mad mad; }; +struct ib_rmpp_mad_hdr { + struct ib_mad_hdr mad_hdr; + struct ib_rmpp_hdr rmpp_hdr; +} __packed; + #define CREATE_TRACE_POINTS #include @@ -494,11 +499,11 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, size_t count, loff_t *pos) { struct ib_umad_file *file = filp->private_data; + struct ib_rmpp_mad_hdr *rmpp_mad_hdr; struct ib_umad_packet *packet; struct ib_mad_agent *agent; struct rdma_ah_attr ah_attr; struct ib_ah *ah; - struct ib_rmpp_mad *rmpp_mad; __be64 *tid; int ret, data_len, hdr_len, copy_offset, rmpp_active; u8 base_version; @@ -506,7 +511,7 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, if (count < hdr_size(file) + IB_MGMT_RMPP_HDR) return -EINVAL; - packet = kzalloc(sizeof *packet + IB_MGMT_RMPP_HDR, GFP_KERNEL); + packet = kzalloc(sizeof(*packet) + IB_MGMT_RMPP_HDR, GFP_KERNEL); if (!packet) return -ENOMEM; @@ -560,13 +565,13 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, goto err_up; } - rmpp_mad = (struct ib_rmpp_mad *) packet->mad.data; - hdr_len = ib_get_mad_data_offset(rmpp_mad->mad_hdr.mgmt_class); + rmpp_mad_hdr = (struct ib_rmpp_mad_hdr *)packet->mad.data; + hdr_len = ib_get_mad_data_offset(rmpp_mad_hdr->mad_hdr.mgmt_class); - if (ib_is_mad_class_rmpp(rmpp_mad->mad_hdr.mgmt_class) + if (ib_is_mad_class_rmpp(rmpp_mad_hdr->mad_hdr.mgmt_class) && ib_mad_kernel_rmpp_agent(agent)) { copy_offset = IB_MGMT_RMPP_HDR; - rmpp_active = ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) & + rmpp_active = ib_get_rmpp_flags(&rmpp_mad_hdr->rmpp_hdr) & IB_MGMT_RMPP_FLAG_ACTIVE; } else { copy_offset = IB_MGMT_MAD_HDR; @@ -615,12 +620,12 @@ static ssize_t ib_umad_write(struct file *filp, const char __user *buf, tid = &((struct ib_mad_hdr *) packet->msg->mad)->tid; *tid = cpu_to_be64(((u64) agent->hi_tid) << 32 | (be64_to_cpup(tid) & 0xffffffff)); - rmpp_mad->mad_hdr.tid = *tid; + rmpp_mad_hdr->mad_hdr.tid = *tid; } if (!ib_mad_kernel_rmpp_agent(agent) - && ib_is_mad_class_rmpp(rmpp_mad->mad_hdr.mgmt_class) - && (ib_get_rmpp_flags(&rmpp_mad->rmpp_hdr) & IB_MGMT_RMPP_FLAG_ACTIVE)) { + && ib_is_mad_class_rmpp(rmpp_mad_hdr->mad_hdr.mgmt_class) + && (ib_get_rmpp_flags(&rmpp_mad_hdr->rmpp_hdr) & IB_MGMT_RMPP_FLAG_ACTIVE)) { spin_lock_irq(&file->send_lock); list_add_tail(&packet->list, &file->send_list); spin_unlock_irq(&file->send_lock); From 4461f41ece4db4c44ef9c01db48c820696f54040 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 27 Feb 2023 09:59:10 +0100 Subject: [PATCH 327/755] clk: tegra20: fix gcc-7 constant overflow warning [ Upstream commit b4a2adbf3586efa12fe78b9dec047423e01f3010 ] Older gcc versions get confused by comparing a u32 value to a negative constant in a switch()/case block: drivers/clk/tegra/clk-tegra20.c: In function 'tegra20_clk_measure_input_freq': drivers/clk/tegra/clk-tegra20.c:581:2: error: case label does not reduce to an integer constant case OSC_CTRL_OSC_FREQ_12MHZ: ^~~~ drivers/clk/tegra/clk-tegra20.c:593:2: error: case label does not reduce to an integer constant case OSC_CTRL_OSC_FREQ_26MHZ: Make the constants unsigned instead. Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20230227085914.2560984-1-arnd@kernel.org Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin --- drivers/clk/tegra/clk-tegra20.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/drivers/clk/tegra/clk-tegra20.c b/drivers/clk/tegra/clk-tegra20.c index 3e0f04f0e16e..3f74497d73e5 100644 --- a/drivers/clk/tegra/clk-tegra20.c +++ b/drivers/clk/tegra/clk-tegra20.c @@ -18,24 +18,24 @@ #define MISC_CLK_ENB 0x48 #define OSC_CTRL 0x50 -#define OSC_CTRL_OSC_FREQ_MASK (3<<30) -#define OSC_CTRL_OSC_FREQ_13MHZ (0<<30) -#define OSC_CTRL_OSC_FREQ_19_2MHZ (1<<30) -#define OSC_CTRL_OSC_FREQ_12MHZ (2<<30) -#define OSC_CTRL_OSC_FREQ_26MHZ (3<<30) -#define OSC_CTRL_MASK (0x3f2 | OSC_CTRL_OSC_FREQ_MASK) +#define OSC_CTRL_OSC_FREQ_MASK (3u<<30) +#define OSC_CTRL_OSC_FREQ_13MHZ (0u<<30) +#define OSC_CTRL_OSC_FREQ_19_2MHZ (1u<<30) +#define OSC_CTRL_OSC_FREQ_12MHZ (2u<<30) +#define OSC_CTRL_OSC_FREQ_26MHZ (3u<<30) +#define OSC_CTRL_MASK (0x3f2u | OSC_CTRL_OSC_FREQ_MASK) -#define OSC_CTRL_PLL_REF_DIV_MASK (3<<28) -#define OSC_CTRL_PLL_REF_DIV_1 (0<<28) -#define OSC_CTRL_PLL_REF_DIV_2 (1<<28) -#define OSC_CTRL_PLL_REF_DIV_4 (2<<28) +#define OSC_CTRL_PLL_REF_DIV_MASK (3u<<28) +#define OSC_CTRL_PLL_REF_DIV_1 (0u<<28) +#define OSC_CTRL_PLL_REF_DIV_2 (1u<<28) +#define OSC_CTRL_PLL_REF_DIV_4 (2u<<28) #define OSC_FREQ_DET 0x58 -#define OSC_FREQ_DET_TRIG (1<<31) +#define OSC_FREQ_DET_TRIG (1u<<31) #define OSC_FREQ_DET_STATUS 0x5c -#define OSC_FREQ_DET_BUSY (1<<31) -#define OSC_FREQ_DET_CNT_MASK 0xFFFF +#define OSC_FREQ_DET_BUSYu (1<<31) +#define OSC_FREQ_DET_CNT_MASK 0xFFFFu #define TEGRA20_CLK_PERIPH_BANKS 3 From 9fcef1e37d546355ec4900adefb649633af37365 Mon Sep 17 00:00:00 2001 From: Tomas Krcka Date: Wed, 29 Mar 2023 12:34:19 +0000 Subject: [PATCH 328/755] iommu/arm-smmu-v3: Acknowledge pri/event queue overflow if any [ Upstream commit 67ea0b7ce41844eae7c10bb04dfe66a23318c224 ] When an overflow occurs in the PRI queue, the SMMU toggles the overflow flag in the PROD register. To exit the overflow condition, the PRI thread is supposed to acknowledge it by toggling this flag in the CONS register. Unacknowledged overflow causes the queue to stop adding anything new. Currently, the priq thread always writes the CONS register back to the SMMU after clearing the queue. The writeback is not necessary if the OVFLG in the PROD register has not been changed, no overflow has occured. This commit checks the difference of the overflow flag between CONS and PROD register. If it's different, toggles the OVACKFLG flag in the CONS register and write it to the SMMU. The situation is similar for the event queue. The acknowledge register is also toggled after clearing the event queue but never propagated to the hardware. This would only be done the next time when executing evtq thread. Unacknowledged event queue overflow doesn't affect the event queue, because the SMMU still adds elements to that queue when the overflow condition is active. But it feel nicer to keep SMMU in sync when possible, so use the same way here as well. Signed-off-by: Tomas Krcka Link: https://lore.kernel.org/r/20230329123420.34641-1-tomas.krcka@gmail.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin --- drivers/iommu/arm-smmu-v3.c | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/drivers/iommu/arm-smmu-v3.c b/drivers/iommu/arm-smmu-v3.c index 4f64c3a9ee88..b3c5d7b4547a 100644 --- a/drivers/iommu/arm-smmu-v3.c +++ b/drivers/iommu/arm-smmu-v3.c @@ -760,6 +760,18 @@ static void queue_inc_cons(struct arm_smmu_ll_queue *q) q->cons = Q_OVF(q->cons) | Q_WRP(q, cons) | Q_IDX(q, cons); } +static void queue_sync_cons_ovf(struct arm_smmu_queue *q) +{ + struct arm_smmu_ll_queue *llq = &q->llq; + + if (likely(Q_OVF(llq->prod) == Q_OVF(llq->cons))) + return; + + llq->cons = Q_OVF(llq->prod) | Q_WRP(llq, llq->cons) | + Q_IDX(llq, llq->cons); + queue_sync_cons_out(q); +} + static int queue_sync_prod_in(struct arm_smmu_queue *q) { int ret = 0; @@ -1720,8 +1732,7 @@ static irqreturn_t arm_smmu_evtq_thread(int irq, void *dev) } while (!queue_empty(llq)); /* Sync our overflow flag, as we believe we're up to speed */ - llq->cons = Q_OVF(llq->prod) | Q_WRP(llq, llq->cons) | - Q_IDX(llq, llq->cons); + queue_sync_cons_ovf(q); return IRQ_HANDLED; } @@ -1779,9 +1790,7 @@ static irqreturn_t arm_smmu_priq_thread(int irq, void *dev) } while (!queue_empty(llq)); /* Sync our overflow flag, as we believe we're up to speed */ - llq->cons = Q_OVF(llq->prod) | Q_WRP(llq, llq->cons) | - Q_IDX(llq, llq->cons); - queue_sync_cons_out(q); + queue_sync_cons_ovf(q); return IRQ_HANDLED; } From e6e917e82de42bde776387f5c19727d3b4f83c02 Mon Sep 17 00:00:00 2001 From: Vicki Pfau Date: Thu, 13 Apr 2023 23:57:42 -0700 Subject: [PATCH 329/755] Input: xpad - add constants for GIP interface numbers [ Upstream commit f9b2e603c6216824e34dc9a67205d98ccc9a41ca ] Wired GIP devices present multiple interfaces with the same USB identification other than the interface number. This adds constants for differentiating two of them and uses them where appropriate Signed-off-by: Vicki Pfau Link: https://lore.kernel.org/r/20230411031650.960322-2-vi@endrift.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin --- drivers/input/joystick/xpad.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 70dedc0f7827..0bd55e1fca37 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -489,6 +489,9 @@ struct xboxone_init_packet { } +#define GIP_WIRED_INTF_DATA 0 +#define GIP_WIRED_INTF_AUDIO 1 + /* * This packet is required for all Xbox One pads with 2015 * or later firmware installed (or present from the factory). @@ -1813,7 +1816,7 @@ static int xpad_probe(struct usb_interface *intf, const struct usb_device_id *id } if (xpad->xtype == XTYPE_XBOXONE && - intf->cur_altsetting->desc.bInterfaceNumber != 0) { + intf->cur_altsetting->desc.bInterfaceNumber != GIP_WIRED_INTF_DATA) { /* * The Xbox One controller lists three interfaces all with the * same interface class, subclass and protocol. Differentiate by From bdc33478d5d37a5630c0c60d60a7f4869a1763aa Mon Sep 17 00:00:00 2001 From: Alain Volmat Date: Fri, 10 Feb 2023 23:43:08 +0100 Subject: [PATCH 330/755] phy: st: miphy28lp: use _poll_timeout functions for waits [ Upstream commit e3be4dd2c8d8aabfd2c3127d0e2e5754d3ae82d6 ] This commit introduces _poll_timeout functions usage instead of wait loops waiting for a status bit. Signed-off-by: Alain Volmat Reviewed-by: Patrice Chotard Link: https://lore.kernel.org/r/20230210224309.98452-1-avolmat@me.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin --- drivers/phy/st/phy-miphy28lp.c | 42 ++++++++-------------------------- 1 file changed, 10 insertions(+), 32 deletions(-) diff --git a/drivers/phy/st/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c index 068160a34f5c..e30305b77f0d 100644 --- a/drivers/phy/st/phy-miphy28lp.c +++ b/drivers/phy/st/phy-miphy28lp.c @@ -9,6 +9,7 @@ #include #include +#include #include #include #include @@ -484,19 +485,11 @@ static inline void miphy28lp_pcie_config_gen(struct miphy28lp_phy *miphy_phy) static inline int miphy28lp_wait_compensation(struct miphy28lp_phy *miphy_phy) { - unsigned long finish = jiffies + 5 * HZ; u8 val; /* Waiting for Compensation to complete */ - do { - val = readb_relaxed(miphy_phy->base + MIPHY_COMP_FSM_6); - - if (time_after_eq(jiffies, finish)) - return -EBUSY; - cpu_relax(); - } while (!(val & COMP_DONE)); - - return 0; + return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_COMP_FSM_6, + val, val & COMP_DONE, 1, 5 * USEC_PER_SEC); } @@ -805,7 +798,6 @@ static inline void miphy28lp_configure_usb3(struct miphy28lp_phy *miphy_phy) static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy) { - unsigned long finish = jiffies + 5 * HZ; u8 mask = HFC_PLL | HFC_RDY; u8 val; @@ -816,21 +808,14 @@ static inline int miphy_is_ready(struct miphy28lp_phy *miphy_phy) if (miphy_phy->type == PHY_TYPE_SATA) mask |= PHY_RDY; - do { - val = readb_relaxed(miphy_phy->base + MIPHY_STATUS_1); - if ((val & mask) != mask) - cpu_relax(); - else - return 0; - } while (!time_after_eq(jiffies, finish)); - - return -EBUSY; + return readb_relaxed_poll_timeout(miphy_phy->base + MIPHY_STATUS_1, + val, (val & mask) == mask, 1, + 5 * USEC_PER_SEC); } static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy) { struct miphy28lp_dev *miphy_dev = miphy_phy->phydev; - unsigned long finish = jiffies + 5 * HZ; u32 val; if (!miphy_phy->osc_rdy) @@ -839,17 +824,10 @@ static int miphy_osc_is_ready(struct miphy28lp_phy *miphy_phy) if (!miphy_phy->syscfg_reg[SYSCFG_STATUS]) return -EINVAL; - do { - regmap_read(miphy_dev->regmap, - miphy_phy->syscfg_reg[SYSCFG_STATUS], &val); - - if ((val & MIPHY_OSC_RDY) != MIPHY_OSC_RDY) - cpu_relax(); - else - return 0; - } while (!time_after_eq(jiffies, finish)); - - return -EBUSY; + return regmap_read_poll_timeout(miphy_dev->regmap, + miphy_phy->syscfg_reg[SYSCFG_STATUS], + val, val & MIPHY_OSC_RDY, 1, + 5 * USEC_PER_SEC); } static int miphy28lp_get_resource_byname(struct device_node *child, From 1e453cb55014367a84655203c31d57dfa87e005e Mon Sep 17 00:00:00 2001 From: Qiang Ning Date: Thu, 30 Mar 2023 10:43:53 +0800 Subject: [PATCH 331/755] mfd: dln2: Fix memory leak in dln2_probe() [ Upstream commit 96da8f148396329ba769246cb8ceaa35f1ddfc48 ] When dln2_setup_rx_urbs() in dln2_probe() fails, error out_free forgets to call usb_put_dev() to decrease the refcount of dln2->usb_dev. Fix this by adding usb_put_dev() in the error handling code of dln2_probe(). Signed-off-by: Qiang Ning Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/20230330024353.4503-1-qning0106@126.com Signed-off-by: Sasha Levin --- drivers/mfd/dln2.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/dln2.c b/drivers/mfd/dln2.c index 707f4287ab4a..80952237e4b4 100644 --- a/drivers/mfd/dln2.c +++ b/drivers/mfd/dln2.c @@ -797,6 +797,7 @@ out_stop_rx: dln2_stop_rx_urbs(dln2); out_free: + usb_put_dev(dln2->usb_dev); dln2_free(dln2); return ret; From 596898303745c31cd641435d3de04567a765a0e4 Mon Sep 17 00:00:00 2001 From: Nikolay Borisov Date: Thu, 26 Nov 2020 15:10:38 +0200 Subject: [PATCH 332/755] btrfs: replace calls to btrfs_find_free_ino with btrfs_find_free_objectid [ Upstream commit abadc1fcd72e887a8f875dabe4a07aa8c28ac8af ] The former is going away as part of the inode map removal so switch callers to btrfs_find_free_objectid. No functional changes since with INODE_MAP disabled (default) find_free_objectid was called anyway. Signed-off-by: Nikolay Borisov Reviewed-by: David Sterba Signed-off-by: David Sterba Stable-dep-of: 0004ff15ea26 ("btrfs: fix space cache inconsistency after error loading it from disk") Signed-off-by: Sasha Levin --- fs/btrfs/inode.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 20c5db8ef842..c89e85a7da7d 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -6830,7 +6830,7 @@ static int btrfs_mknod(struct inode *dir, struct dentry *dentry, if (IS_ERR(trans)) return PTR_ERR(trans); - err = btrfs_find_free_ino(root, &objectid); + err = btrfs_find_free_objectid(root, &objectid); if (err) goto out_unlock; @@ -6894,7 +6894,7 @@ static int btrfs_create(struct inode *dir, struct dentry *dentry, if (IS_ERR(trans)) return PTR_ERR(trans); - err = btrfs_find_free_ino(root, &objectid); + err = btrfs_find_free_objectid(root, &objectid); if (err) goto out_unlock; @@ -7039,7 +7039,7 @@ static int btrfs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode) if (IS_ERR(trans)) return PTR_ERR(trans); - err = btrfs_find_free_ino(root, &objectid); + err = btrfs_find_free_objectid(root, &objectid); if (err) goto out_fail; @@ -9930,7 +9930,7 @@ static int btrfs_whiteout_for_rename(struct btrfs_trans_handle *trans, u64 objectid; u64 index; - ret = btrfs_find_free_ino(root, &objectid); + ret = btrfs_find_free_objectid(root, &objectid); if (ret) return ret; @@ -10416,7 +10416,7 @@ static int btrfs_symlink(struct inode *dir, struct dentry *dentry, if (IS_ERR(trans)) return PTR_ERR(trans); - err = btrfs_find_free_ino(root, &objectid); + err = btrfs_find_free_objectid(root, &objectid); if (err) goto out_unlock; @@ -10699,7 +10699,7 @@ static int btrfs_tmpfile(struct inode *dir, struct dentry *dentry, umode_t mode) if (IS_ERR(trans)) return PTR_ERR(trans); - ret = btrfs_find_free_ino(root, &objectid); + ret = btrfs_find_free_objectid(root, &objectid); if (ret) goto out; From a3714a47b401df45d78c75064eed93ffec54f3ea Mon Sep 17 00:00:00 2001 From: Filipe Manana Date: Thu, 4 May 2023 12:04:18 +0100 Subject: [PATCH 333/755] btrfs: fix space cache inconsistency after error loading it from disk [ Upstream commit 0004ff15ea26015a0a3a6182dca3b9d1df32e2b7 ] When loading a free space cache from disk, at __load_free_space_cache(), if we fail to insert a bitmap entry, we still increment the number of total bitmaps in the btrfs_free_space_ctl structure, which is incorrect since we failed to add the bitmap entry. On error we then empty the cache by calling __btrfs_remove_free_space_cache(), which will result in getting the total bitmaps counter set to 1. A failure to load a free space cache is not critical, so if a failure happens we just rebuild the cache by scanning the extent tree, which happens at block-group.c:caching_thread(). Yet the failure will result in having the total bitmaps of the btrfs_free_space_ctl always bigger by 1 then the number of bitmap entries we have. So fix this by having the total bitmaps counter be incremented only if we successfully added the bitmap entry. Fixes: a67509c30079 ("Btrfs: add a io_ctl struct and helpers for dealing with the space cache") Reviewed-by: Anand Jain CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin --- fs/btrfs/free-space-cache.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index d2d32fed8f2e..0cb93f73acb2 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -784,15 +784,16 @@ static int __load_free_space_cache(struct btrfs_root *root, struct inode *inode, } spin_lock(&ctl->tree_lock); ret = link_free_space(ctl, e); - ctl->total_bitmaps++; - ctl->op->recalc_thresholds(ctl); - spin_unlock(&ctl->tree_lock); if (ret) { + spin_unlock(&ctl->tree_lock); btrfs_err(fs_info, "Duplicate entries in free space cache, dumping"); kmem_cache_free(btrfs_free_space_cachep, e); goto free_cache; } + ctl->total_bitmaps++; + ctl->op->recalc_thresholds(ctl); + spin_unlock(&ctl->tree_lock); list_add_tail(&e->list, &bitmaps); } From 131eb9c9b1a038d30c3dcfd646cc80b45a4c4044 Mon Sep 17 00:00:00 2001 From: Shengjiu Wang Date: Fri, 3 Sep 2021 18:30:04 +0800 Subject: [PATCH 334/755] ASoC: fsl_micfil: register platform component before registering cpu dai [ Upstream commit 0adf292069dcca8bab76a603251fcaabf77468ca ] There is no defer probe when adding platform component to snd_soc_pcm_runtime(rtd), the code is in snd_soc_add_pcm_runtime() snd_soc_register_card() -> snd_soc_bind_card() -> snd_soc_add_pcm_runtime() -> adding cpu dai -> adding codec dai -> adding platform component. So if the platform component is not ready at that time, then the sound card still registered successfully, but platform component is empty, the sound card can't be used. As there is defer probe checking for cpu dai component, then register platform component before cpu dai to avoid such issue. Fixes: 47a70e6fc9a8 ("ASoC: Add MICFIL SoC Digital Audio Interface driver.") Signed-off-by: Shengjiu Wang Link: https://lore.kernel.org/r/1630665006-31437-4-git-send-email-shengjiu.wang@nxp.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/fsl/fsl_micfil.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c index b33746d58633..6285ee8f829e 100644 --- a/sound/soc/fsl/fsl_micfil.c +++ b/sound/soc/fsl/fsl_micfil.c @@ -740,18 +740,23 @@ static int fsl_micfil_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); + /* + * Register platform component before registering cpu dai for there + * is not defer probe for platform component in snd_soc_add_pcm_runtime(). + */ + ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); + if (ret) { + dev_err(&pdev->dev, "failed to pcm register\n"); + return ret; + } + ret = devm_snd_soc_register_component(&pdev->dev, &fsl_micfil_component, &fsl_micfil_dai, 1); if (ret) { dev_err(&pdev->dev, "failed to register component %s\n", fsl_micfil_component.name); - return ret; } - ret = devm_snd_dmaengine_pcm_register(&pdev->dev, NULL, 0); - if (ret) - dev_err(&pdev->dev, "failed to pcm register\n"); - return ret; } From 912a6cff0db14b86ac55e72812c464f08f384d2d Mon Sep 17 00:00:00 2001 From: Wyes Karny Date: Thu, 4 May 2023 06:25:44 +0000 Subject: [PATCH 335/755] cpupower: Make TSC read per CPU for Mperf monitor [ Upstream commit c2adb1877b76fc81ae041e1db1a6ed2078c6746b ] System-wide TSC read could cause a drift in C0 percentage calculation. Because if first TSC is read and then one by one mperf is read for all cpus, this introduces drift between mperf reading of later CPUs and TSC reading. To lower this drift read TSC per CPU and also just after mperf read. This technique improves C0 percentage calculation in Mperf monitor. Before fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 0| 256| 84.62| 15.38| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 1| 87.15| 12.85| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 1| 257| 84.08| 15.92| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 2| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 2| 258| 83.26| 16.74| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 3| 86.61| 13.39| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 3| 259| 83.60| 16.40| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 4| 86.33| 13.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 4| 260| 83.33| 16.67| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 5| 86.06| 13.94| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 5| 261| 83.05| 16.95| 2695||168659003|3970468|| 0.00| 0.00| 0.00 0| 6| 6| 85.51| 14.49| 2695||168659003|3970468|| 0.00| 0.00| 0.00 After fix: (System 100% busy) | Mperf || RAPL || Idle_Stats PKG|CORE| CPU| C0 | Cx | Freq || pack | core || POLL | C1 | C2 0| 0| 0| 98.03| 1.97| 2415||163295480|3811189|| 0.00| 0.00| 0.00 0| 0| 256| 98.50| 1.50| 2394||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 1| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 1| 257| 99.99| 0.01| 2375||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 2| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 2| 258|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 3|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 3| 259| 99.99| 0.01| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 4|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 4| 260|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 5| 99.99| 0.01| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 5| 261|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 6|100.00| 0.00| 2401||163295480|3811189|| 0.00| 0.00| 0.00 0| 6| 262|100.00| 0.00| 2435||163295480|3811189|| 0.00| 0.00| 0.00 Cc: Thomas Renninger Cc: Shuah Khan Cc: Dominik Brodowski Fixes: 7fe2f6399a84 ("cpupowerutils - cpufrequtils extended with quite some features") Signed-off-by: Wyes Karny Signed-off-by: Shuah Khan Signed-off-by: Sasha Levin --- .../utils/idle_monitor/mperf_monitor.c | 31 +++++++++---------- 1 file changed, 14 insertions(+), 17 deletions(-) diff --git a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c index 44806a6dae11..7a76d6300374 100644 --- a/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c +++ b/tools/power/cpupower/utils/idle_monitor/mperf_monitor.c @@ -66,8 +66,8 @@ static int max_freq_mode; */ static unsigned long max_frequency; -static unsigned long long tsc_at_measure_start; -static unsigned long long tsc_at_measure_end; +static unsigned long long *tsc_at_measure_start; +static unsigned long long *tsc_at_measure_end; static unsigned long long *mperf_previous_count; static unsigned long long *aperf_previous_count; static unsigned long long *mperf_current_count; @@ -130,7 +130,7 @@ static int mperf_get_count_percent(unsigned int id, double *percent, aperf_diff = aperf_current_count[cpu] - aperf_previous_count[cpu]; if (max_freq_mode == MAX_FREQ_TSC_REF) { - tsc_diff = tsc_at_measure_end - tsc_at_measure_start; + tsc_diff = tsc_at_measure_end[cpu] - tsc_at_measure_start[cpu]; *percent = 100.0 * mperf_diff / tsc_diff; dprint("%s: TSC Ref - mperf_diff: %llu, tsc_diff: %llu\n", mperf_cstates[id].name, mperf_diff, tsc_diff); @@ -167,7 +167,7 @@ static int mperf_get_count_freq(unsigned int id, unsigned long long *count, if (max_freq_mode == MAX_FREQ_TSC_REF) { /* Calculate max_freq from TSC count */ - tsc_diff = tsc_at_measure_end - tsc_at_measure_start; + tsc_diff = tsc_at_measure_end[cpu] - tsc_at_measure_start[cpu]; time_diff = timespec_diff_us(time_start, time_end); max_frequency = tsc_diff / time_diff; } @@ -186,33 +186,27 @@ static int mperf_get_count_freq(unsigned int id, unsigned long long *count, static int mperf_start(void) { int cpu; - unsigned long long dbg; clock_gettime(CLOCK_REALTIME, &time_start); - mperf_get_tsc(&tsc_at_measure_start); - for (cpu = 0; cpu < cpu_count; cpu++) + for (cpu = 0; cpu < cpu_count; cpu++) { + mperf_get_tsc(&tsc_at_measure_start[cpu]); mperf_init_stats(cpu); + } - mperf_get_tsc(&dbg); - dprint("TSC diff: %llu\n", dbg - tsc_at_measure_start); return 0; } static int mperf_stop(void) { - unsigned long long dbg; int cpu; - for (cpu = 0; cpu < cpu_count; cpu++) + for (cpu = 0; cpu < cpu_count; cpu++) { mperf_measure_stats(cpu); + mperf_get_tsc(&tsc_at_measure_end[cpu]); + } - mperf_get_tsc(&tsc_at_measure_end); clock_gettime(CLOCK_REALTIME, &time_end); - - mperf_get_tsc(&dbg); - dprint("TSC diff: %llu\n", dbg - tsc_at_measure_end); - return 0; } @@ -311,7 +305,8 @@ struct cpuidle_monitor *mperf_register(void) aperf_previous_count = calloc(cpu_count, sizeof(unsigned long long)); mperf_current_count = calloc(cpu_count, sizeof(unsigned long long)); aperf_current_count = calloc(cpu_count, sizeof(unsigned long long)); - + tsc_at_measure_start = calloc(cpu_count, sizeof(unsigned long long)); + tsc_at_measure_end = calloc(cpu_count, sizeof(unsigned long long)); mperf_monitor.name_len = strlen(mperf_monitor.name); return &mperf_monitor; } @@ -322,6 +317,8 @@ void mperf_unregister(void) free(aperf_previous_count); free(mperf_current_count); free(aperf_current_count); + free(tsc_at_measure_start); + free(tsc_at_measure_end); free(is_valid); } From 033297ef3bba0754ee66b60d80da14050e1cc671 Mon Sep 17 00:00:00 2001 From: Tobias Brunner Date: Tue, 9 May 2023 11:00:06 +0200 Subject: [PATCH 336/755] af_key: Reject optional tunnel/BEET mode templates in outbound policies [ Upstream commit cf3128a7aca55b2eefb68281d44749c683bdc96f ] xfrm_state_find() uses `encap_family` of the current template with the passed local and remote addresses to find a matching state. If an optional tunnel or BEET mode template is skipped in a mixed-family scenario, there could be a mismatch causing an out-of-bounds read as the addresses were not replaced to match the family of the next template. While there are theoretical use cases for optional templates in outbound policies, the only practical one is to skip IPComp states in inbound policies if uncompressed packets are received that are handled by an implicitly created IPIP state instead. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Tobias Brunner Acked-by: Herbert Xu Signed-off-by: Steffen Klassert Signed-off-by: Sasha Levin --- net/key/af_key.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/net/key/af_key.c b/net/key/af_key.c index 92f71e8f321c..1a33c46d9c89 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -1944,7 +1944,8 @@ static u32 gen_reqid(struct net *net) } static int -parse_ipsecrequest(struct xfrm_policy *xp, struct sadb_x_ipsecrequest *rq) +parse_ipsecrequest(struct xfrm_policy *xp, struct sadb_x_policy *pol, + struct sadb_x_ipsecrequest *rq) { struct net *net = xp_net(xp); struct xfrm_tmpl *t = xp->xfrm_vec + xp->xfrm_nr; @@ -1962,9 +1963,12 @@ parse_ipsecrequest(struct xfrm_policy *xp, struct sadb_x_ipsecrequest *rq) if ((mode = pfkey_mode_to_xfrm(rq->sadb_x_ipsecrequest_mode)) < 0) return -EINVAL; t->mode = mode; - if (rq->sadb_x_ipsecrequest_level == IPSEC_LEVEL_USE) + if (rq->sadb_x_ipsecrequest_level == IPSEC_LEVEL_USE) { + if ((mode == XFRM_MODE_TUNNEL || mode == XFRM_MODE_BEET) && + pol->sadb_x_policy_dir == IPSEC_DIR_OUTBOUND) + return -EINVAL; t->optional = 1; - else if (rq->sadb_x_ipsecrequest_level == IPSEC_LEVEL_UNIQUE) { + } else if (rq->sadb_x_ipsecrequest_level == IPSEC_LEVEL_UNIQUE) { t->reqid = rq->sadb_x_ipsecrequest_reqid; if (t->reqid > IPSEC_MANUAL_REQID_MAX) t->reqid = 0; @@ -2006,7 +2010,7 @@ parse_ipsecrequests(struct xfrm_policy *xp, struct sadb_x_policy *pol) rq->sadb_x_ipsecrequest_len < sizeof(*rq)) return -EINVAL; - if ((err = parse_ipsecrequest(xp, rq)) < 0) + if ((err = parse_ipsecrequest(xp, pol, rq)) < 0) return err; len -= rq->sadb_x_ipsecrequest_len; rq = (void*)((u8*)rq + rq->sadb_x_ipsecrequest_len); From b22b514209ff8c4287abb853399890ab97e1b5ca Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Wed, 10 May 2023 22:00:20 +0200 Subject: [PATCH 337/755] net: fec: Better handle pm_runtime_get() failing in .remove() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit f816b9829b19394d318e01953aa3b2721bca040d ] In the (unlikely) event that pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, the remove callback returned an error early. The problem with this is that the driver core ignores the error value and continues removing the device. This results in a resource leak. Worse the devm allocated resources are freed and so if a callback of the driver is called later the register mapping is already gone which probably results in a crash. Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Uwe Kleine-König Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20230510200020.1534610-1-u.kleine-koenig@pengutronix.de Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/freescale/fec_main.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index e1b8c58c4d6b..f67f104049db 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3769,7 +3769,9 @@ fec_drv_remove(struct platform_device *pdev) ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) - return ret; + dev_err(&pdev->dev, + "Failed to resume device in remove callback (%pe)\n", + ERR_PTR(ret)); cancel_work_sync(&fep->tx_timeout_work); fec_ptp_stop(pdev); @@ -3782,8 +3784,13 @@ fec_drv_remove(struct platform_device *pdev) of_phy_deregister_fixed_link(np); of_node_put(fep->phy_node); - clk_disable_unprepare(fep->clk_ahb); - clk_disable_unprepare(fep->clk_ipg); + /* After pm_runtime_get_sync() failed, the clks are still off, so skip + * disabling them again. + */ + if (ret >= 0) { + clk_disable_unprepare(fep->clk_ahb); + clk_disable_unprepare(fep->clk_ipg); + } pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); From 5009aead17f060753428e249eb0246eb1c2f8b86 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 9 May 2023 12:07:11 +0300 Subject: [PATCH 338/755] ALSA: firewire-digi00x: prevent potential use after free [ Upstream commit c0e72058d5e21982e61a29de6b098f7c1f0db498 ] This code was supposed to return an error code if init_stream() failed, but it instead freed dg00x->rx_stream and returned success. This potentially leads to a use after free. Fixes: 9a08067ec318 ("ALSA: firewire-digi00x: support AMDTP domain") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/c224cbd5-d9e2-4cd4-9bcf-2138eb1d35c6@kili.mountain Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/firewire/digi00x/digi00x-stream.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/sound/firewire/digi00x/digi00x-stream.c b/sound/firewire/digi00x/digi00x-stream.c index d6a92460060f..1a841c858e06 100644 --- a/sound/firewire/digi00x/digi00x-stream.c +++ b/sound/firewire/digi00x/digi00x-stream.c @@ -259,8 +259,10 @@ int snd_dg00x_stream_init_duplex(struct snd_dg00x *dg00x) return err; err = init_stream(dg00x, &dg00x->tx_stream); - if (err < 0) + if (err < 0) { destroy_stream(dg00x, &dg00x->rx_stream); + return err; + } err = amdtp_domain_init(&dg00x->domain); if (err < 0) { From 5a90309002cdc3509656c5f65db3c802ade7dbc1 Mon Sep 17 00:00:00 2001 From: Zhuang Shengen Date: Thu, 11 May 2023 19:34:30 +0800 Subject: [PATCH 339/755] vsock: avoid to close connected socket after the timeout MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 6d4486efe9c69626cab423456169e250a5cd3af5 ] When client and server establish a connection through vsock, the client send a request to the server to initiate the connection, then start a timer to wait for the server's response. When the server's RESPONSE message arrives, the timer also times out and exits. The server's RESPONSE message is processed first, and the connection is established. However, the client's timer also times out, the original processing logic of the client is to directly set the state of this vsock to CLOSE and return ETIMEDOUT. It will not notify the server when the port is released, causing the server port remain. when client's vsock_connect timeout，it should check sk state is ESTABLISHED or not. if sk state is ESTABLISHED, it means the connection is established, the client should not set the sk state to CLOSE Note: I encountered this issue on kernel-4.18, which can be fixed by this patch. Then I checked the latest code in the community and found similar issue. Fixes: d021c344051a ("VSOCK: Introduce VM Sockets") Signed-off-by: Zhuang Shengen Reviewed-by: Stefano Garzarella Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/vmw_vsock/af_vsock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/vmw_vsock/af_vsock.c b/net/vmw_vsock/af_vsock.c index 28f6188458c4..4cd65a1a07f9 100644 --- a/net/vmw_vsock/af_vsock.c +++ b/net/vmw_vsock/af_vsock.c @@ -1232,7 +1232,7 @@ static int vsock_stream_connect(struct socket *sock, struct sockaddr *addr, vsock_transport_cancel_pkt(vsk); vsock_remove_connected(vsk); goto out_wait; - } else if (timeout == 0) { + } else if ((sk->sk_state != TCP_ESTABLISHED) && (timeout == 0)) { err = -ETIMEDOUT; sk->sk_state = TCP_CLOSE; sock->state = SS_UNCONNECTED; From 7525aa211758cc023a371e010d16ceaae1057807 Mon Sep 17 00:00:00 2001 From: Ke Zhang Date: Fri, 28 Apr 2023 11:16:36 +0800 Subject: [PATCH 340/755] serial: arc_uart: fix of_iomap leak in `arc_serial_probe` [ Upstream commit 8ab5fc55d7f65d58a3c3aeadf11bdf60267cd2bd ] Smatch reports: drivers/tty/serial/arc_uart.c:631 arc_serial_probe() warn: 'port->membase' from of_iomap() not released on lines: 631. In arc_serial_probe(), if uart_add_one_port() fails, port->membase is not released, which would cause a resource leak. To fix this, I replace of_iomap with devm_platform_ioremap_resource. Fixes: 8dbe1d5e09a7 ("serial/arc: inline the probe helper") Signed-off-by: Ke Zhang Reviewed-by: Dongliang Mu Link: https://lore.kernel.org/r/20230428031636.44642-1-m202171830@hust.edu.cn Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/arc_uart.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index d904a3a345e7..dd4be3c8c049 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -613,10 +613,11 @@ static int arc_serial_probe(struct platform_device *pdev) } uart->baud = val; - port->membase = of_iomap(np, 0); - if (!port->membase) + port->membase = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(port->membase)) { /* No point of dev_err since UART itself is hosed here */ - return -ENXIO; + return PTR_ERR(port->membase); + } port->irq = irq_of_parse_and_map(np, 0); From 3040962413981523ae43471a689db2e1b34fd537 Mon Sep 17 00:00:00 2001 From: Peilin Ye Date: Thu, 14 Apr 2022 13:35:40 -0700 Subject: [PATCH 341/755] ip6_gre: Fix skb_under_panic in __gre6_xmit() [ Upstream commit ab198e1d0dd8dc4bc7575fb50758e2cbd51e14e1 ] Feng reported an skb_under_panic BUG triggered by running test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh: [ 82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11 <...> [ 82.607380] Call Trace: [ 82.609389] [ 82.611136] skb_push.cold.109+0x10/0x10 [ 82.614289] __gre6_xmit+0x41e/0x590 [ 82.617169] ip6gre_tunnel_xmit+0x344/0x3f0 [ 82.620526] dev_hard_start_xmit+0xf1/0x330 [ 82.623882] sch_direct_xmit+0xe4/0x250 [ 82.626961] __dev_queue_xmit+0x720/0xfe0 <...> [ 82.633431] packet_sendmsg+0x96a/0x1cb0 [ 82.636568] sock_sendmsg+0x30/0x40 <...> The following sequence of events caused the BUG: 1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is calculated based on old flags (see ip6gre_calc_hlen()); 2. packet_snd() reserves header room for skb A, assuming tunnel->tun_hlen is 4; 3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel()); 4. __gre6_xmit() detects the new tunnel key, and recalculates "tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and TUNNEL_SEQ); 5. gre_build_header() calls skb_push() with insufficient reserved header room, triggering the BUG. As sugguested by Cong, fix it by moving the call to skb_cow_head() after the recalculation of tun_hlen. Reproducer: OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o ip netns add at_ns0 ip link add veth0 type veth peer name veth1 ip link set veth0 netns at_ns0 ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip link set dev veth1 up mtu 1500 ip addr add dev veth1 172.16.1.200/24 ip netns exec at_ns0 ip addr add ::11/96 dev veth0 ip netns exec at_ns0 ip link set dev veth0 up ip addr add dev veth1 ::22/96 ip link set dev veth1 up ip netns exec at_ns0 \ ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \ local ::11 remote ::22 ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24 ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96 ip netns exec at_ns0 ip link set dev ip6gretap00 up ip link add dev ip6gretap11 type ip6gretap external ip addr add dev ip6gretap11 10.1.1.200/24 ip addr add dev ip6gretap11 fc80::200/24 ip link set dev ip6gretap11 up tc qdisc add dev ip6gretap11 clsact tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel ping6 -c 3 -w 10 -q ::11 Fixes: 6712abc168eb ("ip6_gre: add ip6 gre and gretap collect_md mode") Reported-by: Feng Zhou Co-developed-by: Cong Wang Signed-off-by: Cong Wang Signed-off-by: Peilin Ye Signed-off-by: David S. Miller Stable-dep-of: d80fc101d2eb ("erspan: get the proto with the md version for collect_md") Signed-off-by: Sasha Levin --- net/ipv6/ip6_gre.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 85ec466b5735..a1fd3c9c1da3 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -720,9 +720,6 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb, else fl6->daddr = tunnel->parms.raddr; - if (skb_cow_head(skb, dev->needed_headroom ?: tunnel->hlen)) - return -ENOMEM; - /* Push GRE header. */ protocol = (dev->type == ARPHRD_ETHER) ? htons(ETH_P_TEB) : proto; @@ -751,6 +748,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb, (TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ); tun_hlen = gre_calc_hlen(flags); + if (skb_cow_head(skb, dev->needed_headroom ?: tun_hlen + tunnel->encap_hlen)) + return -ENOMEM; + gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), @@ -761,6 +761,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb, if (tunnel->parms.o_flags & TUNNEL_SEQ) tunnel->o_seqno++; + if (skb_cow_head(skb, dev->needed_headroom ?: tunnel->hlen)) + return -ENOMEM; + gre_build_header(skb, tunnel->tun_hlen, tunnel->parms.o_flags, protocol, tunnel->parms.o_key, htonl(tunnel->o_seqno)); From 0eb3ec0a3553aed9598c784965d018d97e503961 Mon Sep 17 00:00:00 2001 From: Peilin Ye Date: Thu, 21 Apr 2022 15:08:38 -0700 Subject: [PATCH 342/755] ip6_gre: Make o_seqno start from 0 in native mode [ Upstream commit fde98ae91f79cab4e020f40c35ed23cbdc59661c ] For IP6GRE and IP6GRETAP devices, currently o_seqno starts from 1 in native mode. According to RFC 2890 2.2., "The first datagram is sent with a sequence number of 0." Fix it. It is worth mentioning that o_seqno already starts from 0 in collect_md mode, see the "if (tunnel->parms.collect_md)" clause in __gre6_xmit(), where tunnel->o_seqno is passed to gre_build_header() before getting incremented. Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Peilin Ye Acked-by: William Tu Signed-off-by: David S. Miller Stable-dep-of: d80fc101d2eb ("erspan: get the proto with the md version for collect_md") Signed-off-by: Sasha Levin --- net/ipv6/ip6_gre.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index a1fd3c9c1da3..e3c65e7681ad 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -711,6 +711,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb, { struct ip6_tnl *tunnel = netdev_priv(dev); __be16 protocol; + __be16 flags; if (dev->type == ARPHRD_ETHER) IPCB(skb)->flags = 0; @@ -726,7 +727,6 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb, if (tunnel->parms.collect_md) { struct ip_tunnel_info *tun_info; const struct ip_tunnel_key *key; - __be16 flags; int tun_hlen; tun_info = skb_tunnel_info(skb); @@ -758,15 +758,14 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb, : 0); } else { - if (tunnel->parms.o_flags & TUNNEL_SEQ) - tunnel->o_seqno++; - if (skb_cow_head(skb, dev->needed_headroom ?: tunnel->hlen)) return -ENOMEM; - gre_build_header(skb, tunnel->tun_hlen, tunnel->parms.o_flags, + flags = tunnel->parms.o_flags; + + gre_build_header(skb, tunnel->tun_hlen, flags, protocol, tunnel->parms.o_key, - htonl(tunnel->o_seqno)); + (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); } return ip6_tnl_xmit(skb, dev, dsfield, fl6, encap_limit, pmtu, From f185ede016c9477fc29cf489873d8f5dc0b5c70f Mon Sep 17 00:00:00 2001 From: Peilin Ye Date: Thu, 21 Apr 2022 15:09:02 -0700 Subject: [PATCH 343/755] ip_gre, ip6_gre: Fix race condition on o_seqno in collect_md mode [ Upstream commit 31c417c948d7f6909cb63f0ac3298f3c38f8ce20 ] As pointed out by Jakub Kicinski, currently using TUNNEL_SEQ in collect_md mode is racy for [IP6]GRE[TAP] devices. Consider the following sequence of events: 1. An [IP6]GRE[TAP] device is created in collect_md mode using "ip link add ... external". "ip" ignores "[o]seq" if "external" is specified, so TUNNEL_SEQ is off, and the device is marked as NETIF_F_LLTX (i.e. it uses lockless TX); 2. Someone sets TUNNEL_SEQ on outgoing skb's, using e.g. bpf_skb_set_tunnel_key() in an eBPF program attached to this device; 3. gre_fb_xmit() or __gre6_xmit() processes these skb's: gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); ^^^^^^^^^^^^^^^^^ Since we are not using the TX lock (&txq->_xmit_lock), multiple CPUs may try to do this tunnel->o_seqno++ in parallel, which is racy. Fix it by making o_seqno atomic_t. As mentioned by Eric Dumazet in commit b790e01aee74 ("ip_gre: lockless xmit"), making o_seqno atomic_t increases "chance for packets being out of order at receiver" when NETIF_F_LLTX is on. Maybe a better fix would be: 1. Do not ignore "oseq" in external mode. Users MUST specify "oseq" if they want the kernel to allow sequencing of outgoing packets; 2. Reject all outgoing TUNNEL_SEQ packets if the device was not created with "oseq". Unfortunately, that would break userspace. We could now make [IP6]GRE[TAP] devices always NETIF_F_LLTX, but let us do it in separate patches to keep this fix minimal. Suggested-by: Jakub Kicinski Fixes: 77a5196a804e ("gre: add sequence number for collect md mode.") Signed-off-by: Peilin Ye Acked-by: William Tu Signed-off-by: David S. Miller Stable-dep-of: d80fc101d2eb ("erspan: get the proto with the md version for collect_md") Signed-off-by: Sasha Levin --- include/net/ip6_tunnel.h | 2 +- include/net/ip_tunnels.h | 2 +- net/ipv4/ip_gre.c | 6 +++--- net/ipv6/ip6_gre.c | 7 ++++--- 4 files changed, 9 insertions(+), 8 deletions(-) diff --git a/include/net/ip6_tunnel.h b/include/net/ip6_tunnel.h index 028eaea1c854..42d50856fcf2 100644 --- a/include/net/ip6_tunnel.h +++ b/include/net/ip6_tunnel.h @@ -57,7 +57,7 @@ struct ip6_tnl { /* These fields used only by GRE */ __u32 i_seqno; /* The last seen seqno */ - __u32 o_seqno; /* The last output seqno */ + atomic_t o_seqno; /* The last output seqno */ int hlen; /* tun_hlen + encap_hlen */ int tun_hlen; /* Precalculated header length */ int encap_hlen; /* Encap header length (FOU,GUE) */ diff --git a/include/net/ip_tunnels.h b/include/net/ip_tunnels.h index 56deb2501e96..6f75a84b47de 100644 --- a/include/net/ip_tunnels.h +++ b/include/net/ip_tunnels.h @@ -113,7 +113,7 @@ struct ip_tunnel { /* These four fields used only by GRE */ u32 i_seqno; /* The last seen seqno */ - u32 o_seqno; /* The last output seqno */ + atomic_t o_seqno; /* The last output seqno */ int tun_hlen; /* Precalculated header length */ /* These four fields used only by ERSPAN */ diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 317fdb9f47e8..f8f008344273 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -437,7 +437,7 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev, /* Push GRE header. */ gre_build_header(skb, tunnel->tun_hlen, flags, proto, tunnel->parms.o_key, - (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); + (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) : 0); ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol); } @@ -475,7 +475,7 @@ static void gre_fb_xmit(struct sk_buff *skb, struct net_device *dev, (TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ); gre_build_header(skb, tunnel_hlen, flags, proto, tunnel_id_to_key32(tun_info->key.tun_id), - (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); + (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) : 0); ip_md_tunnel_xmit(skb, dev, IPPROTO_GRE, tunnel_hlen); @@ -557,7 +557,7 @@ static void erspan_fb_xmit(struct sk_buff *skb, struct net_device *dev) } gre_build_header(skb, 8, TUNNEL_SEQ, - proto, 0, htonl(tunnel->o_seqno++)); + proto, 0, htonl(atomic_fetch_inc(&tunnel->o_seqno))); ip_md_tunnel_xmit(skb, dev, IPPROTO_GRE, tunnel_hlen); diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index e3c65e7681ad..63b5fd3742f2 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -754,7 +754,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb, gre_build_header(skb, tun_hlen, flags, protocol, tunnel_id_to_key32(tun_info->key.tun_id), - (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) + (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) : 0); } else { @@ -765,7 +765,8 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb, gre_build_header(skb, tunnel->tun_hlen, flags, protocol, tunnel->parms.o_key, - (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0); + (flags & TUNNEL_SEQ) ? htonl(atomic_fetch_inc(&tunnel->o_seqno)) + : 0); } return ip6_tnl_xmit(skb, dev, dsfield, fl6, encap_limit, pmtu, @@ -1048,7 +1049,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, /* Push GRE header. */ proto = (t->parms.erspan_ver == 1) ? htons(ETH_P_ERSPAN) : htons(ETH_P_ERSPAN2); - gre_build_header(skb, 8, TUNNEL_SEQ, proto, 0, htonl(t->o_seqno++)); + gre_build_header(skb, 8, TUNNEL_SEQ, proto, 0, htonl(atomic_fetch_inc(&t->o_seqno))); /* TooBig packet may have updated dst->dev's mtu */ if (!t->parms.collect_md && dst && dst_mtu(dst) > dst->dev->mtu) From d1bcc606870ec582211026a09b9d3de92bf2bc74 Mon Sep 17 00:00:00 2001 From: Xin Long Date: Thu, 11 May 2023 19:22:11 -0400 Subject: [PATCH 344/755] erspan: get the proto with the md version for collect_md [ Upstream commit d80fc101d2eb9b3188c228d61223890aeea480a4 ] In commit 20704bd1633d ("erspan: build the header with the right proto according to erspan_ver"), it gets the proto with t->parms.erspan_ver, but t->parms.erspan_ver is not used by collect_md branch, and instead it should get the proto with md->version for collect_md. Thanks to Kevin for pointing this out. Fixes: 20704bd1633d ("erspan: build the header with the right proto according to erspan_ver") Fixes: 94d7d8f29287 ("ip6_gre: add erspan v2 support") Reported-by: Kevin Traynor Signed-off-by: Xin Long Reviewed-by: Simon Horman Reviewed-by: William Tu Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/ipv6/ip6_gre.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c index 63b5fd3742f2..0977137b00dc 100644 --- a/net/ipv6/ip6_gre.c +++ b/net/ipv6/ip6_gre.c @@ -1003,12 +1003,14 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, ntohl(tun_id), ntohl(md->u.index), truncate, false); + proto = htons(ETH_P_ERSPAN); } else if (md->version == 2) { erspan_build_header_v2(skb, ntohl(tun_id), md->u.md2.dir, get_hwid(&md->u.md2), truncate, false); + proto = htons(ETH_P_ERSPAN2); } else { goto tx_err; } @@ -1031,24 +1033,25 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb, break; } - if (t->parms.erspan_ver == 1) + if (t->parms.erspan_ver == 1) { erspan_build_header(skb, ntohl(t->parms.o_key), t->parms.index, truncate, false); - else if (t->parms.erspan_ver == 2) + proto = htons(ETH_P_ERSPAN); + } else if (t->parms.erspan_ver == 2) { erspan_build_header_v2(skb, ntohl(t->parms.o_key), t->parms.dir, t->parms.hwid, truncate, false); - else + proto = htons(ETH_P_ERSPAN2); + } else { goto tx_err; + } fl6.daddr = t->parms.raddr; } /* Push GRE header. */ - proto = (t->parms.erspan_ver == 1) ? htons(ETH_P_ERSPAN) - : htons(ETH_P_ERSPAN2); gre_build_header(skb, 8, TUNNEL_SEQ, proto, 0, htonl(atomic_fetch_inc(&t->o_seqno))); /* TooBig packet may have updated dst->dev's mtu */ From 304e5cb77eb8e788f03a6d6fcbc136896250538b Mon Sep 17 00:00:00 2001 From: Jijie Shao Date: Fri, 12 May 2023 18:00:12 +0800 Subject: [PATCH 345/755] net: hns3: fix sending pfc frames after reset issue [ Upstream commit f14db07064727dd3bc0906c77a6d2759c1bbb395 ] To prevent the system from abnormally sending PFC frames after an abnormal reset. The hns3 driver notifies the firmware to disable pfc before reset. Fixes: 35d93a30040c ("net: hns3: adjust the process of PF reset") Signed-off-by: Jijie Shao Signed-off-by: Hao Lan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- .../ethernet/hisilicon/hns3/hns3pf/hclge_main.c | 15 +++++++++------ .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 4 ++-- .../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 5 +++++ 3 files changed, 16 insertions(+), 8 deletions(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c index d58abdfdb9b7..08277c3cf280 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c @@ -6688,12 +6688,15 @@ static void hclge_ae_stop(struct hnae3_handle *handle) /* If it is not PF reset or FLR, the firmware will disable the MAC, * so it only need to stop phy here. */ - if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state) && - hdev->reset_type != HNAE3_FUNC_RESET && - hdev->reset_type != HNAE3_FLR_RESET) { - hclge_mac_stop_phy(hdev); - hclge_update_link_status(hdev); - return; + if (test_bit(HCLGE_STATE_RST_HANDLING, &hdev->state)) { + hclge_pfc_pause_en_cfg(hdev, HCLGE_PFC_TX_RX_DISABLE, + HCLGE_PFC_DISABLE); + if (hdev->reset_type != HNAE3_FUNC_RESET && + hdev->reset_type != HNAE3_FLR_RESET) { + hclge_mac_stop_phy(hdev); + hclge_update_link_status(hdev); + return; + } } for (i = 0; i < handle->kinfo.num_tqps; i++) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c index 8448607742a6..2183e700f9d9 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c @@ -170,8 +170,8 @@ int hclge_mac_pause_en_cfg(struct hclge_dev *hdev, bool tx, bool rx) return hclge_cmd_send(&hdev->hw, &desc, 1); } -static int hclge_pfc_pause_en_cfg(struct hclge_dev *hdev, u8 tx_rx_bitmap, - u8 pfc_bitmap) +int hclge_pfc_pause_en_cfg(struct hclge_dev *hdev, u8 tx_rx_bitmap, + u8 pfc_bitmap) { struct hclge_desc desc; struct hclge_pfc_en_cmd *pfc = (struct hclge_pfc_en_cmd *)desc.data; diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h index 260f22d19d81..406084bb2307 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h +++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h @@ -109,6 +109,9 @@ struct hclge_bp_to_qs_map_cmd { u32 rsvd1; }; +#define HCLGE_PFC_DISABLE 0 +#define HCLGE_PFC_TX_RX_DISABLE 0 + struct hclge_pfc_en_cmd { u8 tx_rx_en_bitmap; u8 pri_en_bitmap; @@ -150,6 +153,8 @@ void hclge_tm_schd_info_update(struct hclge_dev *hdev, u8 num_tc); void hclge_tm_pfc_info_update(struct hclge_dev *hdev); int hclge_tm_dwrr_cfg(struct hclge_dev *hdev); int hclge_tm_init_hw(struct hclge_dev *hdev, bool init); +int hclge_pfc_pause_en_cfg(struct hclge_dev *hdev, u8 tx_rx_bitmap, + u8 pfc_bitmap); int hclge_mac_pause_en_cfg(struct hclge_dev *hdev, bool tx, bool rx); int hclge_pause_addr_cfg(struct hclge_dev *hdev, const u8 *mac_addr); int hclge_pfc_rx_stats_get(struct hclge_dev *hdev, u64 *stats); From 69055f99900bd66662f48d95447e34e9204b81da Mon Sep 17 00:00:00 2001 From: Jie Wang Date: Fri, 12 May 2023 18:00:13 +0800 Subject: [PATCH 346/755] net: hns3: fix reset delay time to avoid configuration timeout [ Upstream commit 814d0c786068e858d889ada3153bff82f64223ad ] Currently the hns3 vf function reset delays 5000ms before vf rebuild process. In product applications, this delay is too long for application configurations and causes configuration timeout. According to the tests, 500ms delay is enough for reset process except PF FLR. So this patch modifies delay to 500ms in these scenarios. Fixes: 6988eb2a9b77 ("net: hns3: Add support to reset the enet/ring mgmt layer") Signed-off-by: Jie Wang Signed-off-by: Hao Lan Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c index 48956c30d2ee..ec3d98595198 100644 --- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c +++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_main.c @@ -1432,7 +1432,10 @@ static int hclgevf_reset_wait(struct hclgevf_dev *hdev) * might happen in case reset assertion was made by PF. Yes, this also * means we might end up waiting bit more even for VF reset. */ - msleep(5000); + if (hdev->reset_type == HNAE3_VF_FULL_RESET) + msleep(5000); + else + msleep(500); return 0; } From 1550bcf2983ae1220cc8ab899a39a423fa7cb523 Mon Sep 17 00:00:00 2001 From: Duoming Zhou Date: Wed, 8 Mar 2023 12:55:14 +0000 Subject: [PATCH 347/755] media: netup_unidvb: fix use-after-free at del_timer() [ Upstream commit 0f5bb36bf9b39a2a96e730bf4455095b50713f63 ] When Universal DVB card is detaching, netup_unidvb_dma_fini() uses del_timer() to stop dma->timeout timer. But when timer handler netup_unidvb_dma_timeout() is running, del_timer() could not stop it. As a result, the use-after-free bug could happen. The process is shown below: (cleanup routine) | (timer routine) | mod_timer(&dev->tx_sim_timer, ..) netup_unidvb_finidev() | (wait a time) netup_unidvb_dma_fini() | netup_unidvb_dma_timeout() del_timer(&dma->timeout); | | ndev->pci_dev->dev //USE Fix by changing del_timer() to del_timer_sync(). Link: https://lore.kernel.org/linux-media/20230308125514.4208-1-duoming@zju.edu.cn Fixes: 52b1eaf4c59a ("[media] netup_unidvb: NetUP Universal DVB-S/S2/T/T2/C PCI-E card driver") Signed-off-by: Duoming Zhou Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin --- drivers/media/pci/netup_unidvb/netup_unidvb_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c index eb5621c9ebf8..129acf595410 100644 --- a/drivers/media/pci/netup_unidvb/netup_unidvb_core.c +++ b/drivers/media/pci/netup_unidvb/netup_unidvb_core.c @@ -697,7 +697,7 @@ static void netup_unidvb_dma_fini(struct netup_unidvb_dev *ndev, int num) netup_unidvb_dma_enable(dma, 0); msleep(50); cancel_work_sync(&dma->work); - del_timer(&dma->timeout); + del_timer_sync(&dma->timeout); } static int netup_unidvb_dma_setup(struct netup_unidvb_dev *ndev) From ed50fcab1435352a739c871ba7fad8c152210c16 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 17 Apr 2023 23:04:11 +0200 Subject: [PATCH 348/755] drm/exynos: fix g2d_open/close helper function definitions [ Upstream commit 2ef0785b30bd6549ddbc124979f1b6596e065ae2 ] The empty stub functions are defined as global functions, which causes a warning because of missing prototypes: drivers/gpu/drm/exynos/exynos_drm_g2d.h:37:5: error: no previous prototype for 'g2d_open' drivers/gpu/drm/exynos/exynos_drm_g2d.h:42:5: error: no previous prototype for 'g2d_close' Mark them as 'static inline' to avoid the warning and to make them behave as intended. Fixes: eb4d9796fa34 ("drm/exynos: g2d: Convert to driver component API") Signed-off-by: Arnd Bergmann Reviewed-by: Andi Shyti Signed-off-by: Inki Dae Signed-off-by: Sasha Levin --- drivers/gpu/drm/exynos/exynos_drm_g2d.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.h b/drivers/gpu/drm/exynos/exynos_drm_g2d.h index 74ea3c26dead..1a5ae781b56c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.h +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.h @@ -34,11 +34,11 @@ static inline int exynos_g2d_exec_ioctl(struct drm_device *dev, void *data, return -ENODEV; } -int g2d_open(struct drm_device *drm_dev, struct drm_file *file) +static inline int g2d_open(struct drm_device *drm_dev, struct drm_file *file) { return 0; } -void g2d_close(struct drm_device *drm_dev, struct drm_file *file) +static inline void g2d_close(struct drm_device *drm_dev, struct drm_file *file) { } #endif From 435855b0831b351cb72cb38369ee33122ce9574c Mon Sep 17 00:00:00 2001 From: Dong Chenchen Date: Thu, 11 May 2023 20:54:40 +0800 Subject: [PATCH 349/755] net: nsh: Use correct mac_offset to unwind gso skb in nsh_gso_segment() [ Upstream commit c83b49383b595be50647f0c764a48c78b5f3c4f8 ] As the call trace shows, skb_panic was caused by wrong skb->mac_header in nsh_gso_segment(): invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 3 PID: 2737 Comm: syz Not tainted 6.3.0-next-20230505 #1 RIP: 0010:skb_panic+0xda/0xe0 call Trace: skb_push+0x91/0xa0 nsh_gso_segment+0x4f3/0x570 skb_mac_gso_segment+0x19e/0x270 __skb_gso_segment+0x1e8/0x3c0 validate_xmit_skb+0x452/0x890 validate_xmit_skb_list+0x99/0xd0 sch_direct_xmit+0x294/0x7c0 __dev_queue_xmit+0x16f0/0x1d70 packet_xmit+0x185/0x210 packet_snd+0xc15/0x1170 packet_sendmsg+0x7b/0xa0 sock_sendmsg+0x14f/0x160 The root cause is: nsh_gso_segment() use skb->network_header - nhoff to reset mac_header in skb_gso_error_unwind() if inner-layer protocol gso fails. However, skb->network_header may be reset by inner-layer protocol gso function e.g. mpls_gso_segment. skb->mac_header reset by the inaccurate network_header will be larger than skb headroom. nsh_gso_segment nhoff = skb->network_header - skb->mac_header; __skb_pull(skb,nsh_len) skb_mac_gso_segment mpls_gso_segment skb_reset_network_header(skb);//skb->network_header+=nsh_len return -EINVAL; skb_gso_error_unwind skb_push(skb, nsh_len); skb->mac_header = skb->network_header - nhoff; // skb->mac_header > skb->headroom, cause skb_push panic Use correct mac_offset to restore mac_header and get rid of nhoff. Fixes: c411ed854584 ("nsh: add GSO support") Reported-by: syzbot+632b5d9964208bfef8c0@syzkaller.appspotmail.com Suggested-by: Eric Dumazet Signed-off-by: Dong Chenchen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/nsh/nsh.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/net/nsh/nsh.c b/net/nsh/nsh.c index e9ca007718b7..0f23e5e8e03e 100644 --- a/net/nsh/nsh.c +++ b/net/nsh/nsh.c @@ -77,13 +77,12 @@ static struct sk_buff *nsh_gso_segment(struct sk_buff *skb, netdev_features_t features) { struct sk_buff *segs = ERR_PTR(-EINVAL); + u16 mac_offset = skb->mac_header; unsigned int nsh_len, mac_len; __be16 proto; - int nhoff; skb_reset_network_header(skb); - nhoff = skb->network_header - skb->mac_header; mac_len = skb->mac_len; if (unlikely(!pskb_may_pull(skb, NSH_BASE_HDR_LEN))) @@ -108,15 +107,14 @@ static struct sk_buff *nsh_gso_segment(struct sk_buff *skb, segs = skb_mac_gso_segment(skb, features); if (IS_ERR_OR_NULL(segs)) { skb_gso_error_unwind(skb, htons(ETH_P_NSH), nsh_len, - skb->network_header - nhoff, - mac_len); + mac_offset, mac_len); goto out; } for (skb = segs; skb; skb = skb->next) { skb->protocol = htons(ETH_P_NSH); __skb_push(skb, nsh_len); - skb_set_mac_header(skb, -nhoff); + skb->mac_header = mac_offset; skb->network_header = skb->mac_header + mac_len; skb->mac_len = mac_len; } From 2cca63d5bc4e17d636da708d44ade73f47d8ba1a Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 4 May 2023 16:07:27 -0700 Subject: [PATCH 350/755] net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop() [ Upstream commit 93e0401e0fc0c54b0ac05b687cd135c2ac38187c ] The call to phy_stop() races with the later call to phy_disconnect(), resulting in concurrent phy_suspend() calls being run from different CPUs. The final call to phy_disconnect() ensures that the PHY is stopped and suspended, too. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 1b725a021455..468f79c270ac 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2988,7 +2988,6 @@ static void bcmgenet_netif_stop(struct net_device *dev) /* Disable MAC transmit. TX DMA disabled must be done before this */ umac_enable_set(priv, CMD_TX_EN, false); - phy_stop(dev->phydev); bcmgenet_disable_rx_napi(priv); bcmgenet_intr_disable(priv); From d0baaadd1c5e8d1a01bd8173509d569fceac416e Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Sun, 14 May 2023 19:56:07 -0700 Subject: [PATCH 351/755] net: bcmgenet: Restore phy_stop() depending upon suspend/close [ Upstream commit 225c657945c4a6307741cb3cc89467eadcc26e9b ] Removing the phy_stop() from bcmgenet_netif_stop() ended up causing warnings from the PHY library that phy_start() is called from the RUNNING state since we are no longer stopping the PHY state machine during bcmgenet_suspend(). Restore the call to phy_stop() but make it conditional on being called from the close or suspend path. Fixes: c96e731c93ff ("net: bcmgenet: connect and disconnect from the PHY state machine") Fixes: 93e0401e0fc0 ("net: bcmgenet: Remove phy_stop() from bcmgenet_netif_stop()") Signed-off-by: Florian Fainelli Reviewed-by: Pavan Chebbi Link: https://lore.kernel.org/r/20230515025608.2587012-1-f.fainelli@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- drivers/net/ethernet/broadcom/genet/bcmgenet.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c index 468f79c270ac..750acbf29464 100644 --- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c +++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c @@ -2973,7 +2973,7 @@ err_clk_disable: return ret; } -static void bcmgenet_netif_stop(struct net_device *dev) +static void bcmgenet_netif_stop(struct net_device *dev, bool stop_phy) { struct bcmgenet_priv *priv = netdev_priv(dev); @@ -2988,6 +2988,8 @@ static void bcmgenet_netif_stop(struct net_device *dev) /* Disable MAC transmit. TX DMA disabled must be done before this */ umac_enable_set(priv, CMD_TX_EN, false); + if (stop_phy) + phy_stop(dev->phydev); bcmgenet_disable_rx_napi(priv); bcmgenet_intr_disable(priv); @@ -3013,7 +3015,7 @@ static int bcmgenet_close(struct net_device *dev) netif_dbg(priv, ifdown, dev, "bcmgenet_close\n"); - bcmgenet_netif_stop(dev); + bcmgenet_netif_stop(dev, false); /* Really kill the PHY state machine and disconnect from it */ phy_disconnect(dev->phydev); @@ -3711,7 +3713,7 @@ static int bcmgenet_suspend(struct device *d) netif_device_detach(dev); - bcmgenet_netif_stop(dev); + bcmgenet_netif_stop(dev, true); if (!device_may_wakeup(d)) phy_suspend(dev->phydev); From e519a404a5bbba37693cb10fa61794a5fce4fd9b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 14 May 2023 12:15:53 +0300 Subject: [PATCH 352/755] wifi: iwlwifi: mvm: don't trust firmware n_channels [ Upstream commit 682b6dc29d98e857e6ca4bbc077c7dc2899b7473 ] If the firmware sends us a corrupted MCC response with n_channels much larger than the command response can be, we might copy far too much (uninitialized) memory and even crash if the n_channels is large enough to make it run out of the one page allocated for the FW response. Fix that by checking the lengths. Doing a < comparison would be sufficient, but the firmware should be doing it correctly, so check more strictly. Fixes: dcaf9f5ecb6f ("iwlwifi: mvm: add MCC update FW API") Signed-off-by: Johannes Berg Signed-off-by: Gregory Greenman Link: https://lore.kernel.org/r/20230514120631.d7b233139eb4.I51fd319df8e9d41881fc8450e83d78049518a79a@changeid Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- drivers/net/wireless/intel/iwlwifi/mvm/nvm.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c b/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c index f49887379c43..f485c0dd75d6 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/nvm.c @@ -508,6 +508,11 @@ iwl_mvm_update_mcc(struct iwl_mvm *mvm, const char *alpha2, struct iwl_mcc_update_resp *mcc_resp = (void *)pkt->data; n_channels = __le32_to_cpu(mcc_resp->n_channels); + if (iwl_rx_packet_payload_len(pkt) != + struct_size(mcc_resp, channels, n_channels)) { + resp_cp = ERR_PTR(-EINVAL); + goto exit; + } resp_len = sizeof(struct iwl_mcc_update_resp) + n_channels * sizeof(__le32); resp_cp = kmemdup(mcc_resp, resp_len, GFP_KERNEL); @@ -519,6 +524,11 @@ iwl_mvm_update_mcc(struct iwl_mvm *mvm, const char *alpha2, struct iwl_mcc_update_resp_v3 *mcc_resp_v3 = (void *)pkt->data; n_channels = __le32_to_cpu(mcc_resp_v3->n_channels); + if (iwl_rx_packet_payload_len(pkt) != + struct_size(mcc_resp_v3, channels, n_channels)) { + resp_cp = ERR_PTR(-EINVAL); + goto exit; + } resp_len = sizeof(struct iwl_mcc_update_resp) + n_channels * sizeof(__le32); resp_cp = kzalloc(resp_len, GFP_KERNEL); From e20105d967ab5b53ff50a0e5991fe37324d2ba20 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 15 May 2023 21:09:11 +0200 Subject: [PATCH 353/755] cassini: Fix a memory leak in the error handling path of cas_init_one() [ Upstream commit 412cd77a2c24b191c65ea53025222418db09817c ] cas_saturn_firmware_init() allocates some memory using vmalloc(). This memory is freed in the .remove() function but not it the error handling path of the probe. Add the missing vfree() to avoid a memory leak, should an error occur. Fixes: fcaa40669cd7 ("cassini: use request_firmware") Signed-off-by: Christophe JAILLET Reviewed-by: Pavan Chebbi Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/sun/cassini.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/ethernet/sun/cassini.c b/drivers/net/ethernet/sun/cassini.c index 6e78a33aa5e4..ecaa9beee76e 100644 --- a/drivers/net/ethernet/sun/cassini.c +++ b/drivers/net/ethernet/sun/cassini.c @@ -5138,6 +5138,8 @@ err_out_iounmap: cas_shutdown(cp); mutex_unlock(&cp->pm_mutex); + vfree(cp->fw_data); + pci_iounmap(pdev, cp->regs); From 53bf7cda160b9aa945f8232688ff034b9713a67f Mon Sep 17 00:00:00 2001 From: Aleksandr Loktionov Date: Tue, 16 May 2023 10:41:46 -0700 Subject: [PATCH 354/755] igb: fix bit_shift to be in [1..8] range [ Upstream commit 60d758659f1fb49e0d5b6ac2691ede8c0958795b ] In igb_hash_mc_addr() the expression: "mc_addr[4] >> 8 - bit_shift", right shifting "mc_addr[4]" shift by more than 7 bits always yields zero, so hash becomes not so different. Add initialization with bit_shift = 1 and add a loop condition to ensure bit_shift will be always in [1..8] range. Fixes: 9d5c824399de ("igb: PCI-Express 82575 Gigabit Ethernet driver") Signed-off-by: Aleksandr Loktionov Tested-by: Pucha Himasekhar Reddy (A Contingent worker at Intel) Signed-off-by: Tony Nguyen Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/intel/igb/e1000_mac.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/igb/e1000_mac.c b/drivers/net/ethernet/intel/igb/e1000_mac.c index 79ee0a747260..4e69cb2c025f 100644 --- a/drivers/net/ethernet/intel/igb/e1000_mac.c +++ b/drivers/net/ethernet/intel/igb/e1000_mac.c @@ -425,7 +425,7 @@ void igb_mta_set(struct e1000_hw *hw, u32 hash_value) static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) { u32 hash_value, hash_mask; - u8 bit_shift = 0; + u8 bit_shift = 1; /* Register count multiplied by bits per register */ hash_mask = (hw->mac.mta_reg_count * 32) - 1; @@ -433,7 +433,7 @@ static u32 igb_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) /* For a mc_filter_type of 0, bit_shift is the number of left-shifts * where 0xFF would still fall within the hash mask. */ - while (hash_mask >> bit_shift != 0xFF) + while (hash_mask >> bit_shift != 0xFF && bit_shift < 4) bit_shift++; /* The portion of the address that is used for the hash table From f662f856acec2608a5f3b061b3f7a23b4e8bc0a6 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 16 May 2023 14:23:42 +0000 Subject: [PATCH 355/755] vlan: fix a potential uninit-value in vlan_dev_hard_start_xmit() [ Upstream commit dacab578c7c6cd06c50c89dfa36b0e0f10decd4e ] syzbot triggered the following splat [1], sending an empty message through pppoe_sendmsg(). When VLAN_FLAG_REORDER_HDR flag is set, vlan_dev_hard_header() does not push extra bytes for the VLAN header, because vlan is offloaded. Unfortunately vlan_dev_hard_start_xmit() first reads veth->h_vlan_proto before testing (vlan->flags & VLAN_FLAG_REORDER_HDR). We need to swap the two conditions. [1] BUG: KMSAN: uninit-value in vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 vlan_dev_hard_start_xmit+0x171/0x7f0 net/8021q/vlan_dev.c:111 __netdev_start_xmit include/linux/netdevice.h:4883 [inline] netdev_start_xmit include/linux/netdevice.h:4897 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x253/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x3c7f/0x5ac0 net/core/dev.c:4246 dev_queue_xmit include/linux/netdevice.h:3053 [inline] pppoe_sendmsg+0xa93/0xb80 drivers/net/ppp/pppoe.c:900 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Uninit was created at: slab_post_alloc_hook+0x12d/0xb60 mm/slab.h:774 slab_alloc_node mm/slub.c:3452 [inline] kmem_cache_alloc_node+0x543/0xab0 mm/slub.c:3497 kmalloc_reserve+0x148/0x470 net/core/skbuff.c:520 __alloc_skb+0x3a7/0x850 net/core/skbuff.c:606 alloc_skb include/linux/skbuff.h:1277 [inline] sock_wmalloc+0xfe/0x1a0 net/core/sock.c:2583 pppoe_sendmsg+0x3af/0xb80 drivers/net/ppp/pppoe.c:867 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0xa24/0xe40 net/socket.c:2501 ___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2555 __sys_sendmmsg+0x411/0xa50 net/socket.c:2641 __do_sys_sendmmsg net/socket.c:2670 [inline] __se_sys_sendmmsg net/socket.c:2667 [inline] __x64_sys_sendmmsg+0xbc/0x120 net/socket.c:2667 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd CPU: 0 PID: 29770 Comm: syz-executor.0 Not tainted 6.3.0-rc6-syzkaller-gc478e5b17829 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/8021q/vlan_dev.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index b10f31f98cb8..0a3a16791621 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -109,8 +109,8 @@ static netdev_tx_t vlan_dev_hard_start_xmit(struct sk_buff *skb, * NOTE: THIS ASSUMES DIX ETHERNET, SPECIFICALLY NOT SUPPORTING * OTHER THINGS LIKE FDDI/TokenRing/802.3 SNAPs... */ - if (veth->h_vlan_proto != vlan->vlan_proto || - vlan->flags & VLAN_FLAG_REORDER_HDR) { + if (vlan->flags & VLAN_FLAG_REORDER_HDR || + veth->h_vlan_proto != vlan->vlan_proto) { u16 vlan_tci; vlan_tci = vlan->vlan_id; vlan_tci |= vlan_dev_get_egress_qos_mask(dev, skb->priority); From 7cef7681aa7719ff585dd06113a061ab2def7da0 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 1 May 2023 14:22:35 -0400 Subject: [PATCH 356/755] USB: usbtmc: Fix direction for 0-length ioctl control messages commit 94d25e9128988c6a1fc9070f6e98215a95795bd8 upstream. The syzbot fuzzer found a problem in the usbtmc driver: When a user submits an ioctl for a 0-length control transfer, the driver does not check that the direction is set to OUT: ------------[ cut here ]------------ usb 3-1: BOGUS control dir, pipe 80000b80 doesn't match bRequestType fd WARNING: CPU: 0 PID: 5100 at drivers/usb/core/urb.c:411 usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Modules linked in: CPU: 0 PID: 5100 Comm: syz-executor428 Not tainted 6.3.0-syzkaller-12049-g58390c8ce1bd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/14/2023 RIP: 0010:usb_submit_urb+0x14a7/0x1880 drivers/usb/core/urb.c:411 Code: 7c 24 40 e8 1b 13 5c fb 48 8b 7c 24 40 e8 21 1d f0 fe 45 89 e8 44 89 f1 4c 89 e2 48 89 c6 48 c7 c7 e0 b5 fc 8a e8 19 c8 23 fb <0f> 0b e9 9f ee ff ff e8 ed 12 5c fb 0f b6 1d 12 8a 3c 08 31 ff 41 RSP: 0018:ffffc90003d2fb00 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff8880789e9058 RCX: 0000000000000000 RDX: ffff888029593b80 RSI: ffffffff814c1447 RDI: 0000000000000001 RBP: ffff88801ea742f8 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88802915e528 R13: 00000000000000fd R14: 0000000080000b80 R15: ffff8880222b3100 FS: 0000555556ca63c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f9ef4d18150 CR3: 0000000073e5b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: usb_start_wait_urb+0x101/0x4b0 drivers/usb/core/message.c:58 usb_internal_control_msg drivers/usb/core/message.c:102 [inline] usb_control_msg+0x320/0x4a0 drivers/usb/core/message.c:153 usbtmc_ioctl_request drivers/usb/class/usbtmc.c:1954 [inline] usbtmc_ioctl+0x1b3d/0x2840 drivers/usb/class/usbtmc.c:2097 To fix this, we must override the direction in the bRequestType field of the control request structure when the length is 0. Reported-and-tested-by: syzbot+ce77725b89b7bd52425c@syzkaller.appspotmail.com Signed-off-by: Alan Stern Link: https://lore.kernel.org/linux-usb/000000000000716a3705f9adb8ee@google.com/ CC: Link: https://lore.kernel.org/r/ede1ee02-b718-49e7-a44c-51339fec706b@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usbtmc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 77b1802f829b..fdfa2da24287 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -1898,6 +1898,8 @@ static int usbtmc_ioctl_request(struct usbtmc_device_data *data, if (request.req.wLength > USBTMC_BUFSIZE) return -EMSGSIZE; + if (request.req.wLength == 0) /* Length-0 requests are never IN */ + request.req.bRequestType &= ~USB_DIR_IN; is_in = request.req.bRequestType & USB_DIR_IN; From 1f36dc41616b39527a3f25fa0a9861d8363b7763 Mon Sep 17 00:00:00 2001 From: Maxime Bizon Date: Fri, 5 May 2023 13:47:59 +0200 Subject: [PATCH 357/755] usb-storage: fix deadlock when a scsi command timeouts more than once commit a398d5eac6984316e71474e25b975688f282379b upstream. With faulty usb-storage devices, read/write can timeout, in that case the SCSI layer will abort and re-issue the command. USB storage has no internal timeout, it relies on SCSI layer aborting commands via .eh_abort_handler() for non those responsive devices. After two consecutive timeouts of the same command, SCSI layer calls .eh_device_reset_handler(), without calling .eh_abort_handler() first. With usb-storage, this causes a deadlock: -> .eh_device_reset_handler -> device_reset -> mutex_lock(&(us->dev_mutex)); mutex already by usb_stor_control_thread(), which is waiting for command completion: -> usb_stor_control_thread (mutex taken here) -> usb_stor_invoke_transport -> usb_stor_Bulk_transport -> usb_stor_bulk_srb -> usb_stor_bulk_transfer_sglist -> usb_sg_wait Make sure we cancel any pending command in .eh_device_reset_handler() to avoid this. Signed-off-by: Maxime Bizon Cc: linux-usb@vger.kernel.org Cc: stable Link: https://lore.kernel.org/all/ZEllnjMKT8ulZbJh@sakura/ Reviewed-by: Alan Stern Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230505114759.1189741-1-mbizon@freebox.fr Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/scsiglue.c | 28 +++++++++++++++++++++------- 1 file changed, 21 insertions(+), 7 deletions(-) diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 2adcabe060c5..49d17988e2ce 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -407,22 +407,25 @@ static DEF_SCSI_QCMD(queuecommand) ***********************************************************************/ /* Command timeout and abort */ -static int command_abort(struct scsi_cmnd *srb) +static int command_abort_matching(struct us_data *us, struct scsi_cmnd *srb_match) { - struct us_data *us = host_to_us(srb->device->host); - - usb_stor_dbg(us, "%s called\n", __func__); - /* * us->srb together with the TIMED_OUT, RESETTING, and ABORTING * bits are protected by the host lock. */ scsi_lock(us_to_host(us)); - /* Is this command still active? */ - if (us->srb != srb) { + /* is there any active pending command to abort ? */ + if (!us->srb) { scsi_unlock(us_to_host(us)); usb_stor_dbg(us, "-- nothing to abort\n"); + return SUCCESS; + } + + /* Does the command match the passed srb if any ? */ + if (srb_match && us->srb != srb_match) { + scsi_unlock(us_to_host(us)); + usb_stor_dbg(us, "-- pending command mismatch\n"); return FAILED; } @@ -445,6 +448,14 @@ static int command_abort(struct scsi_cmnd *srb) return SUCCESS; } +static int command_abort(struct scsi_cmnd *srb) +{ + struct us_data *us = host_to_us(srb->device->host); + + usb_stor_dbg(us, "%s called\n", __func__); + return command_abort_matching(us, srb); +} + /* * This invokes the transport reset mechanism to reset the state of the * device @@ -456,6 +467,9 @@ static int device_reset(struct scsi_cmnd *srb) usb_stor_dbg(us, "%s called\n", __func__); + /* abort any pending command before reset */ + command_abort_matching(us, NULL); + /* lock the device pointers and do the reset */ mutex_lock(&(us->dev_mutex)); result = us->transport_reset(us); From 241491524ab01dc8c4946606867d764197c9d624 Mon Sep 17 00:00:00 2001 From: Weitao Wang Date: Sun, 23 Apr 2023 18:59:52 +0800 Subject: [PATCH 358/755] USB: UHCI: adjust zhaoxin UHCI controllers OverCurrent bit value commit dddb342b5b9e482bb213aecc08cbdb201ea4f8da upstream. OverCurrent condition is not standardized in the UHCI spec. Zhaoxin UHCI controllers report OverCurrent bit active off. In order to handle OverCurrent condition correctly, the uhci-hcd driver needs to be told to expect the active-off behavior. Suggested-by: Alan Stern Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230423105952.4526-1-WeitaoWang-oc@zhaoxin.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-pci.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/usb/host/uhci-pci.c b/drivers/usb/host/uhci-pci.c index 0fa3d72bae26..79a6f1442160 100644 --- a/drivers/usb/host/uhci-pci.c +++ b/drivers/usb/host/uhci-pci.c @@ -119,11 +119,13 @@ static int uhci_pci_init(struct usb_hcd *hcd) uhci->rh_numports = uhci_count_ports(hcd); - /* Intel controllers report the OverCurrent bit active on. - * VIA controllers report it active off, so we'll adjust the - * bit value. (It's not standardized in the UHCI spec.) + /* + * Intel controllers report the OverCurrent bit active on. VIA + * and ZHAOXIN controllers report it active off, so we'll adjust + * the bit value. (It's not standardized in the UHCI spec.) */ - if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA) + if (to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_VIA || + to_pci_dev(uhci_dev(uhci))->vendor == PCI_VENDOR_ID_ZHAOXIN) uhci->oc_low = 1; /* HP's server management chip requires a longer port reset delay. */ From 33b6648d27b8db9deca0bdefeba9be755c9323c6 Mon Sep 17 00:00:00 2001 From: Udipto Goswami Date: Tue, 9 May 2023 20:18:36 +0530 Subject: [PATCH 359/755] usb: dwc3: debugfs: Resume dwc3 before accessing registers commit 614ce6a2ea50068b45339257891e51e639ac9001 upstream. When the dwc3 device is runtime suspended, various required clocks are in disabled state and it is not guaranteed that access to any registers would work. Depending on the SoC glue, a register read could be as benign as returning 0 or be fatal enough to hang the system. In order to prevent such scenarios of fatal errors, make sure to resume dwc3 then allow the function to proceed. Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org #3.2: 30332eeefec8: debugfs: regset32: Add Runtime PM support Signed-off-by: Udipto Goswami Reviewed-by: Johan Hovold Tested-by: Johan Hovold Acked-by: Thinh Nguyen Link: https://lore.kernel.org/r/20230509144836.6803-1-quic_ugoswami@quicinc.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/debugfs.c | 109 +++++++++++++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index 9fb519b2efb4..9bc46aec08a3 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -327,6 +327,11 @@ static int dwc3_lsp_show(struct seq_file *s, void *unused) unsigned int current_mode; unsigned long flags; u32 reg; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); reg = dwc3_readl(dwc->regs, DWC3_GSTS); @@ -345,6 +350,8 @@ static int dwc3_lsp_show(struct seq_file *s, void *unused) } spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -390,6 +397,11 @@ static int dwc3_mode_show(struct seq_file *s, void *unused) struct dwc3 *dwc = s->private; unsigned long flags; u32 reg; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); reg = dwc3_readl(dwc->regs, DWC3_GCTL); @@ -409,6 +421,8 @@ static int dwc3_mode_show(struct seq_file *s, void *unused) seq_printf(s, "UNKNOWN %08x\n", DWC3_GCTL_PRTCAP(reg)); } + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -455,6 +469,11 @@ static int dwc3_testmode_show(struct seq_file *s, void *unused) struct dwc3 *dwc = s->private; unsigned long flags; u32 reg; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); reg = dwc3_readl(dwc->regs, DWC3_DCTL); @@ -485,6 +504,8 @@ static int dwc3_testmode_show(struct seq_file *s, void *unused) seq_printf(s, "UNKNOWN %d\n", reg); } + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -501,6 +522,7 @@ static ssize_t dwc3_testmode_write(struct file *file, unsigned long flags; u32 testmode = 0; char buf[32]; + int ret; if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; @@ -518,10 +540,16 @@ static ssize_t dwc3_testmode_write(struct file *file, else testmode = 0; + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; + spin_lock_irqsave(&dwc->lock, flags); dwc3_gadget_set_test_mode(dwc, testmode); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return count; } @@ -540,12 +568,18 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused) enum dwc3_link_state state; u32 reg; u8 speed; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); reg = dwc3_readl(dwc->regs, DWC3_GSTS); if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) { seq_puts(s, "Not available\n"); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); return 0; } @@ -558,6 +592,8 @@ static int dwc3_link_state_show(struct seq_file *s, void *unused) dwc3_gadget_hs_link_string(state)); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -576,6 +612,7 @@ static ssize_t dwc3_link_state_write(struct file *file, char buf[32]; u32 reg; u8 speed; + int ret; if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) return -EFAULT; @@ -595,10 +632,15 @@ static ssize_t dwc3_link_state_write(struct file *file, else return -EINVAL; + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; + spin_lock_irqsave(&dwc->lock, flags); reg = dwc3_readl(dwc->regs, DWC3_GSTS); if (DWC3_GSTS_CURMOD(reg) != DWC3_GSTS_CURMOD_DEVICE) { spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); return -EINVAL; } @@ -608,12 +650,15 @@ static ssize_t dwc3_link_state_write(struct file *file, if (speed < DWC3_DSTS_SUPERSPEED && state != DWC3_LINK_STATE_RECOV) { spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); return -EINVAL; } dwc3_gadget_set_link_state(dwc, state); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return count; } @@ -636,6 +681,11 @@ static int dwc3_tx_fifo_size_show(struct seq_file *s, void *unused) struct dwc3 *dwc = dep->dwc; unsigned long flags; u32 val; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); val = dwc3_core_fifo_space(dep, DWC3_TXFIFO); @@ -646,6 +696,8 @@ static int dwc3_tx_fifo_size_show(struct seq_file *s, void *unused) seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -655,6 +707,11 @@ static int dwc3_rx_fifo_size_show(struct seq_file *s, void *unused) struct dwc3 *dwc = dep->dwc; unsigned long flags; u32 val; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); val = dwc3_core_fifo_space(dep, DWC3_RXFIFO); @@ -665,6 +722,8 @@ static int dwc3_rx_fifo_size_show(struct seq_file *s, void *unused) seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -674,12 +733,19 @@ static int dwc3_tx_request_queue_show(struct seq_file *s, void *unused) struct dwc3 *dwc = dep->dwc; unsigned long flags; u32 val; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); val = dwc3_core_fifo_space(dep, DWC3_TXREQQ); seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -689,12 +755,19 @@ static int dwc3_rx_request_queue_show(struct seq_file *s, void *unused) struct dwc3 *dwc = dep->dwc; unsigned long flags; u32 val; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); val = dwc3_core_fifo_space(dep, DWC3_RXREQQ); seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -704,12 +777,19 @@ static int dwc3_rx_info_queue_show(struct seq_file *s, void *unused) struct dwc3 *dwc = dep->dwc; unsigned long flags; u32 val; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); val = dwc3_core_fifo_space(dep, DWC3_RXINFOQ); seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -719,12 +799,19 @@ static int dwc3_descriptor_fetch_queue_show(struct seq_file *s, void *unused) struct dwc3 *dwc = dep->dwc; unsigned long flags; u32 val; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); val = dwc3_core_fifo_space(dep, DWC3_DESCFETCHQ); seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -734,12 +821,19 @@ static int dwc3_event_queue_show(struct seq_file *s, void *unused) struct dwc3 *dwc = dep->dwc; unsigned long flags; u32 val; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); val = dwc3_core_fifo_space(dep, DWC3_EVENTQ); seq_printf(s, "%u\n", val); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -785,6 +879,11 @@ static int dwc3_trb_ring_show(struct seq_file *s, void *unused) struct dwc3 *dwc = dep->dwc; unsigned long flags; int i; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); if (dep->number <= 1) { @@ -814,6 +913,8 @@ static int dwc3_trb_ring_show(struct seq_file *s, void *unused) out: spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -826,6 +927,11 @@ static int dwc3_ep_info_register_show(struct seq_file *s, void *unused) u32 lower_32_bits; u32 upper_32_bits; u32 reg; + int ret; + + ret = pm_runtime_resume_and_get(dwc->dev); + if (ret < 0) + return ret; spin_lock_irqsave(&dwc->lock, flags); reg = DWC3_GDBGLSPMUX_EPSELECT(dep->number); @@ -838,6 +944,8 @@ static int dwc3_ep_info_register_show(struct seq_file *s, void *unused) seq_printf(s, "0x%016llx\n", ep_info); spin_unlock_irqrestore(&dwc->lock, flags); + pm_runtime_put_sync(dwc->dev); + return 0; } @@ -899,6 +1007,7 @@ void dwc3_debugfs_init(struct dwc3 *dwc) dwc->regset->regs = dwc3_regs; dwc->regset->nregs = ARRAY_SIZE(dwc3_regs); dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START; + dwc->regset->dev = dwc->dev; root = debugfs_create_dir(dev_name(dwc->dev), NULL); dwc->root = root; From 4f9c0a7c272626cb6716ffc7800e8c73260cdce6 Mon Sep 17 00:00:00 2001 From: Badhri Jagan Sridharan Date: Mon, 8 May 2023 21:44:43 +0000 Subject: [PATCH 360/755] usb: typec: altmodes/displayport: fix pin_assignment_show commit d8f28269dd4bf9b55c3fb376ae31512730a96fce upstream. This patch fixes negative indexing of buf array in pin_assignment_show when get_current_pin_assignments returns 0 i.e. no compatible pin assignments are found. BUG: KASAN: use-after-free in pin_assignment_show+0x26c/0x33c ... Call trace: dump_backtrace+0x110/0x204 dump_stack_lvl+0x84/0xbc print_report+0x358/0x974 kasan_report+0x9c/0xfc __do_kernel_fault+0xd4/0x2d4 do_bad_area+0x48/0x168 do_tag_check_fault+0x24/0x38 do_mem_abort+0x6c/0x14c el1_abort+0x44/0x68 el1h_64_sync_handler+0x64/0xa4 el1h_64_sync+0x78/0x7c pin_assignment_show+0x26c/0x33c dev_attr_show+0x50/0xc0 Fixes: 0e3bb7d6894d ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Signed-off-by: Badhri Jagan Sridharan Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20230508214443.893436-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/altmodes/displayport.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index ca22a05179d1..a2a1baabca93 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -501,6 +501,10 @@ static ssize_t pin_assignment_show(struct device *dev, mutex_unlock(&dp->lock); + /* get_current_pin_assignments can return 0 when no matching pin assignments are found */ + if (len == 0) + len++; + buf[len - 1] = '\n'; return len; } From 4ef155ddf9578bf035964d58739fdcd7dd44b4a4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 16 May 2023 20:44:12 +0200 Subject: [PATCH 361/755] ALSA: hda: Fix Oops by 9.1 surround channel names commit 3b44ec8c5c44790a82f07e90db45643c762878c6 upstream. get_line_out_pfx() may trigger an Oops by overflowing the static array with more than 8 channels. This was reported for MacBookPro 12,1 with Cirrus codec. As a workaround, extend for the 9.1 channels and also fix the potential Oops by unifying the code paths accessing the same array with the proper size check. Reported-by: Olliver Schinagl Cc: Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/hda_generic.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index e92fcb150e57..77c0abd252eb 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -1147,8 +1147,8 @@ static bool path_has_mixer(struct hda_codec *codec, int path_idx, int ctl_type) return path && path->ctls[ctl_type]; } -static const char * const channel_name[4] = { - "Front", "Surround", "CLFE", "Side" +static const char * const channel_name[] = { + "Front", "Surround", "CLFE", "Side", "Back", }; /* give some appropriate ctl name prefix for the given line out channel */ @@ -1174,7 +1174,7 @@ static const char *get_line_out_pfx(struct hda_codec *codec, int ch, /* multi-io channels */ if (ch >= cfg->line_outs) - return channel_name[ch]; + goto fixed_name; switch (cfg->line_out_type) { case AUTO_PIN_SPEAKER_OUT: @@ -1226,6 +1226,7 @@ static const char *get_line_out_pfx(struct hda_codec *codec, int ch, if (cfg->line_outs == 1 && !spec->multi_ios) return "Line Out"; + fixed_name: if (ch >= ARRAY_SIZE(channel_name)) { snd_BUG(); return "PCM"; From 739056188ad3cf45bbd58d5488aa00f6f5f5a650 Mon Sep 17 00:00:00 2001 From: Nikhil Mahale Date: Wed, 17 May 2023 14:37:36 +0530 Subject: [PATCH 362/755] ALSA: hda: Add NVIDIA codec IDs a3 through a7 to patch table commit dc4f2ccaedddb489a83e7b12ebbdc347272aacc9 upstream. These IDs are for AD102, AD103, AD104, AD106, and AD107 gpus with audio functions that are largely similar to the existing ones. Tested audio using gnome-settings, over HDMI, DP-SST and DP-MST connections on AD106 gpu. Signed-off-by: Nikhil Mahale Cc: Link: https://lore.kernel.org/r/20230517090736.15088-1-nmahale@nvidia.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_hdmi.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/sound/pci/hda/patch_hdmi.c b/sound/pci/hda/patch_hdmi.c index 58e9a0171fe1..c72abdaac96e 100644 --- a/sound/pci/hda/patch_hdmi.c +++ b/sound/pci/hda/patch_hdmi.c @@ -4197,6 +4197,11 @@ HDA_CODEC_ENTRY(0x10de009d, "GPU 9d HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de009e, "GPU 9e HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de009f, "GPU 9f HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de00a0, "GPU a0 HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de00a3, "GPU a3 HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de00a4, "GPU a4 HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de00a5, "GPU a5 HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de00a6, "GPU a6 HDMI/DP", patch_nvhdmi), +HDA_CODEC_ENTRY(0x10de00a7, "GPU a7 HDMI/DP", patch_nvhdmi), HDA_CODEC_ENTRY(0x10de8001, "MCP73 HDMI", patch_nvhdmi_2ch), HDA_CODEC_ENTRY(0x10de8067, "MCP67/68 HDMI", patch_nvhdmi_2ch), HDA_CODEC_ENTRY(0x11069f80, "VX900 HDMI/DP", patch_via_hdmi), From 57fd0d122eddc6c8401d0da39db2a165a60a8bdc Mon Sep 17 00:00:00 2001 From: Ai Chao Date: Sat, 6 May 2023 10:26:53 +0800 Subject: [PATCH 363/755] ALSA: hda/realtek: Add a quirk for HP EliteDesk 805 commit 90670ef774a8b6700c38ce1222e6aa263be54d5f upstream. Add a quirk for HP EliteDesk 805 to fixup ALC3867 headset MIC no sound. Signed-off-by: Ai Chao Cc: Link: https://lore.kernel.org/r/20230506022653.2074343-1-aichao@kylinos.cn Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index b6b1440cc04a..7d0c67101895 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10342,6 +10342,7 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800), SND_PCI_QUIRK(0x103c, 0x870c, "HP", ALC897_FIXUP_HP_HSMIC_VERB), SND_PCI_QUIRK(0x103c, 0x8719, "HP", ALC897_FIXUP_HP_HSMIC_VERB), + SND_PCI_QUIRK(0x103c, 0x872b, "HP", ALC897_FIXUP_HP_HSMIC_VERB), SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x103c, 0x877e, "HP 288 Pro G6", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2), From 8804825251014161d6fbeca854f37f10191b09db Mon Sep 17 00:00:00 2001 From: "Luke D. Jones" Date: Sat, 6 May 2023 11:58:24 +1200 Subject: [PATCH 364/755] ALSA: hda/realtek: Add quirk for 2nd ASUS GU603 commit a4671b7fba59775845ee60cfbdfc4ba64300211b upstream. Add quirk for GU603 with 0x1c62 variant of codec. Signed-off-by: Luke D. Jones Cc: Link: https://lore.kernel.org/r/20230505235824.49607-2-luke@ljones.dev Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7d0c67101895..2ae8334111be 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8273,6 +8273,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1b13, "Asus U41SV", ALC269_FIXUP_INV_DMIC), SND_PCI_QUIRK(0x1043, 0x1bbd, "ASUS Z550MA", ALC255_FIXUP_ASUS_MIC_NO_PRESENCE), SND_PCI_QUIRK(0x1043, 0x1c23, "Asus X55U", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), + SND_PCI_QUIRK(0x1043, 0x1c62, "ASUS GU603", ALC289_FIXUP_ASUS_GA401), SND_PCI_QUIRK(0x1043, 0x1c92, "ASUS ROG Strix G15", ALC285_FIXUP_ASUS_G533Z_PINS), SND_PCI_QUIRK(0x1043, 0x1ccd, "ASUS X555UB", ALC256_FIXUP_ASUS_MIC), SND_PCI_QUIRK(0x1043, 0x1d42, "ASUS Zephyrus G14 2022", ALC289_FIXUP_ASUS_GA401), From e658112893467b5f44a8d3810ee2dad976834645 Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Thu, 6 Apr 2023 13:08:45 +0200 Subject: [PATCH 365/755] can: j1939: recvmsg(): allow MSG_CMSG_COMPAT flag commit 1db080cbdbab28752bbb1c86d64daf96253a5da1 upstream. The control message provided by J1939 support MSG_CMSG_COMPAT but blocked recvmsg() syscalls that have set this flag, i.e. on 32bit user space on 64 bit kernels. Link: https://github.com/hartkopp/can-isotp/issues/59 Cc: Oleksij Rempel Suggested-by: Marc Kleine-Budde Signed-off-by: Oliver Hartkopp Tested-by: Oleksij Rempel Acked-by: Oleksij Rempel Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Link: https://lore.kernel.org/20230505110308.81087-3-mkl@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- net/can/j1939/socket.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/can/j1939/socket.c b/net/can/j1939/socket.c index 8817a258e73b..904b167b07cf 100644 --- a/net/can/j1939/socket.c +++ b/net/can/j1939/socket.c @@ -798,7 +798,7 @@ static int j1939_sk_recvmsg(struct socket *sock, struct msghdr *msg, struct j1939_sk_buff_cb *skcb; int ret = 0; - if (flags & ~(MSG_DONTWAIT | MSG_ERRQUEUE)) + if (flags & ~(MSG_DONTWAIT | MSG_ERRQUEUE | MSG_CMSG_COMPAT)) return -EINVAL; if (flags & MSG_ERRQUEUE) From 36cd7601e6b9f5f823e597512460af867b2ee14a Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 16 May 2023 15:43:13 +0200 Subject: [PATCH 366/755] can: kvaser_pciefd: Set CAN_STATE_STOPPED in kvaser_pciefd_stop() commit aed0e6ca7dbb8fbea9bc69c9ac663d5533c8c5d8 upstream. Set can.state to CAN_STATE_STOPPED in kvaser_pciefd_stop(). Without this fix, wrong CAN state was repported after the interface was brought down. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson Link: https://lore.kernel.org/r/20230516134318.104279-2-extja@kvaser.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/kvaser_pciefd.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index faa78d38d752..66d40866352f 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -719,6 +719,7 @@ static int kvaser_pciefd_stop(struct net_device *netdev) iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); del_timer(&can->bec_poll_timer); } + can->can.state = CAN_STATE_STOPPED; close_candev(netdev); return ret; From c0e9fb21b612c9dd56d26b514a41a6408ea26383 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 16 May 2023 15:43:15 +0200 Subject: [PATCH 367/755] can: kvaser_pciefd: Call request_irq() before enabling interrupts commit 84762d8da89d29ba842317eb842973e628c27391 upstream. Make sure the interrupt handler is registered before enabling interrupts. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson Link: https://lore.kernel.org/r/20230516134318.104279-4-extja@kvaser.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/kvaser_pciefd.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index 66d40866352f..85e8459a1a23 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -1823,6 +1823,11 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, if (err) goto err_teardown_can_ctrls; + err = request_irq(pcie->pci->irq, kvaser_pciefd_irq_handler, + IRQF_SHARED, KVASER_PCIEFD_DRV_NAME, pcie); + if (err) + goto err_teardown_can_ctrls; + iowrite32(KVASER_PCIEFD_SRB_IRQ_DPD0 | KVASER_PCIEFD_SRB_IRQ_DPD1, pcie->reg_base + KVASER_PCIEFD_SRB_IRQ_REG); @@ -1843,11 +1848,6 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, iowrite32(KVASER_PCIEFD_SRB_CMD_RDB1, pcie->reg_base + KVASER_PCIEFD_SRB_CMD_REG); - err = request_irq(pcie->pci->irq, kvaser_pciefd_irq_handler, - IRQF_SHARED, KVASER_PCIEFD_DRV_NAME, pcie); - if (err) - goto err_teardown_can_ctrls; - err = kvaser_pciefd_reg_candev(pcie); if (err) goto err_free_irq; From e5ac4f12074eabfa5096b85bca275475589f57f9 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 16 May 2023 15:43:16 +0200 Subject: [PATCH 368/755] can: kvaser_pciefd: Empty SRB buffer in probe commit c589557dd1426f5adf90c7a919d4fde5a3e4ef64 upstream. Empty the "Shared receive buffer" (SRB) in probe, to assure we start in a known state, and don't process any irrelevant packets. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson Link: https://lore.kernel.org/r/20230516134318.104279-5-extja@kvaser.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/kvaser_pciefd.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index 85e8459a1a23..52d649d5f05f 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -70,10 +70,12 @@ MODULE_DESCRIPTION("CAN driver for Kvaser CAN/PCIe devices"); #define KVASER_PCIEFD_SYSID_BUILD_REG (KVASER_PCIEFD_SYSID_BASE + 0x14) /* Shared receive buffer registers */ #define KVASER_PCIEFD_SRB_BASE 0x1f200 +#define KVASER_PCIEFD_SRB_FIFO_LAST_REG (KVASER_PCIEFD_SRB_BASE + 0x1f4) #define KVASER_PCIEFD_SRB_CMD_REG (KVASER_PCIEFD_SRB_BASE + 0x200) #define KVASER_PCIEFD_SRB_IEN_REG (KVASER_PCIEFD_SRB_BASE + 0x204) #define KVASER_PCIEFD_SRB_IRQ_REG (KVASER_PCIEFD_SRB_BASE + 0x20c) #define KVASER_PCIEFD_SRB_STAT_REG (KVASER_PCIEFD_SRB_BASE + 0x210) +#define KVASER_PCIEFD_SRB_RX_NR_PACKETS_REG (KVASER_PCIEFD_SRB_BASE + 0x214) #define KVASER_PCIEFD_SRB_CTRL_REG (KVASER_PCIEFD_SRB_BASE + 0x218) /* EPCS flash controller registers */ #define KVASER_PCIEFD_SPI_BASE 0x1fc00 @@ -110,6 +112,9 @@ MODULE_DESCRIPTION("CAN driver for Kvaser CAN/PCIe devices"); /* DMA support */ #define KVASER_PCIEFD_SRB_STAT_DMA BIT(24) +/* SRB current packet level */ +#define KVASER_PCIEFD_SRB_RX_NR_PACKETS_MASK 0xff + /* DMA Enable */ #define KVASER_PCIEFD_SRB_CTRL_DMA_ENABLE BIT(0) @@ -1053,6 +1058,7 @@ static int kvaser_pciefd_setup_dma(struct kvaser_pciefd *pcie) { int i; u32 srb_status; + u32 srb_packet_count; dma_addr_t dma_addr[KVASER_PCIEFD_DMA_COUNT]; /* Disable the DMA */ @@ -1080,6 +1086,15 @@ static int kvaser_pciefd_setup_dma(struct kvaser_pciefd *pcie) KVASER_PCIEFD_SRB_CMD_RDB1, pcie->reg_base + KVASER_PCIEFD_SRB_CMD_REG); + /* Empty Rx FIFO */ + srb_packet_count = ioread32(pcie->reg_base + KVASER_PCIEFD_SRB_RX_NR_PACKETS_REG) & + KVASER_PCIEFD_SRB_RX_NR_PACKETS_MASK; + while (srb_packet_count) { + /* Drop current packet in FIFO */ + ioread32(pcie->reg_base + KVASER_PCIEFD_SRB_FIFO_LAST_REG); + srb_packet_count--; + } + srb_status = ioread32(pcie->reg_base + KVASER_PCIEFD_SRB_STAT_REG); if (!(srb_status & KVASER_PCIEFD_SRB_STAT_DI)) { dev_err(&pcie->pci->dev, "DMA not idle before enabling\n"); From 33d5a0a4985af2e589d3983cbf729ed7dddeb889 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 16 May 2023 15:43:14 +0200 Subject: [PATCH 369/755] can: kvaser_pciefd: Clear listen-only bit if not explicitly requested commit bf7ac55e991ca177f1ac16be51152f1ef291a4df upstream. The listen-only bit was never cleared, causing the controller to always use listen-only mode, if previously set. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson Link: https://lore.kernel.org/r/20230516134318.104279-3-extja@kvaser.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/kvaser_pciefd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index 52d649d5f05f..c36a5deb8165 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -561,6 +561,8 @@ static void kvaser_pciefd_setup_controller(struct kvaser_pciefd_can *can) if (can->can.ctrlmode & CAN_CTRLMODE_LISTENONLY) mode |= KVASER_PCIEFD_KCAN_MODE_LOM; + else + mode &= ~KVASER_PCIEFD_KCAN_MODE_LOM; mode |= KVASER_PCIEFD_KCAN_MODE_EEN; mode |= KVASER_PCIEFD_KCAN_MODE_EPEN; From 4579e2556767d6df7826854fde6e2a9eb5f89640 Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 16 May 2023 15:43:17 +0200 Subject: [PATCH 370/755] can: kvaser_pciefd: Do not send EFLUSH command on TFD interrupt commit 262d7a52ba27525e3c1203230c9f0524e48bbb34 upstream. Under certain circumstances we send two EFLUSH commands, resulting in two EFLUSH ack packets, while only expecting a single EFLUSH ack. This can cause the driver Tx flush completion to get out of sync. To avoid this problem, don't enable the "Transmit buffer flush done" (TFD) interrupt and remove the code handling it. Now we only send EFLUSH command after receiving status packet with "Init detected" (IDET) bit set. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson Link: https://lore.kernel.org/r/20230516134318.104279-6-extja@kvaser.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/kvaser_pciefd.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index c36a5deb8165..f0b95bdc9e15 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -533,7 +533,7 @@ static int kvaser_pciefd_set_tx_irq(struct kvaser_pciefd_can *can) KVASER_PCIEFD_KCAN_IRQ_TOF | KVASER_PCIEFD_KCAN_IRQ_ABD | KVASER_PCIEFD_KCAN_IRQ_TAE | KVASER_PCIEFD_KCAN_IRQ_TAL | KVASER_PCIEFD_KCAN_IRQ_FDIC | KVASER_PCIEFD_KCAN_IRQ_BPP | - KVASER_PCIEFD_KCAN_IRQ_TAR | KVASER_PCIEFD_KCAN_IRQ_TFD; + KVASER_PCIEFD_KCAN_IRQ_TAR; iowrite32(msk, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); @@ -581,7 +581,7 @@ static void kvaser_pciefd_start_controller_flush(struct kvaser_pciefd_can *can) spin_lock_irqsave(&can->lock, irq); iowrite32(-1, can->reg_base + KVASER_PCIEFD_KCAN_IRQ_REG); - iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD | KVASER_PCIEFD_KCAN_IRQ_TFD, + iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); status = ioread32(can->reg_base + KVASER_PCIEFD_KCAN_STAT_REG); @@ -624,7 +624,7 @@ static int kvaser_pciefd_bus_on(struct kvaser_pciefd_can *can) iowrite32(0, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); iowrite32(-1, can->reg_base + KVASER_PCIEFD_KCAN_IRQ_REG); - iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD | KVASER_PCIEFD_KCAN_IRQ_TFD, + iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); mode = ioread32(can->reg_base + KVASER_PCIEFD_KCAN_MODE_REG); @@ -1009,8 +1009,7 @@ static int kvaser_pciefd_setup_can_ctrls(struct kvaser_pciefd *pcie) SET_NETDEV_DEV(netdev, &pcie->pci->dev); iowrite32(-1, can->reg_base + KVASER_PCIEFD_KCAN_IRQ_REG); - iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD | - KVASER_PCIEFD_KCAN_IRQ_TFD, + iowrite32(KVASER_PCIEFD_KCAN_IRQ_ABD, can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); pcie->can[i] = can; @@ -1439,9 +1438,6 @@ static int kvaser_pciefd_handle_status_packet(struct kvaser_pciefd *pcie, cmd = KVASER_PCIEFD_KCAN_CMD_AT; cmd |= ++can->cmd_seq << KVASER_PCIEFD_KCAN_CMD_SEQ_SHIFT; iowrite32(cmd, can->reg_base + KVASER_PCIEFD_KCAN_CMD_REG); - - iowrite32(KVASER_PCIEFD_KCAN_IRQ_TFD, - can->reg_base + KVASER_PCIEFD_KCAN_IEN_REG); } else if (p->header[0] & KVASER_PCIEFD_SPACK_IDET && p->header[0] & KVASER_PCIEFD_SPACK_IRM && cmdseq == (p->header[1] & KVASER_PCIEFD_PACKET_SEQ_MSK) && @@ -1730,15 +1726,6 @@ static int kvaser_pciefd_transmit_irq(struct kvaser_pciefd_can *can) if (irq & KVASER_PCIEFD_KCAN_IRQ_TOF) netdev_err(can->can.dev, "Tx FIFO overflow\n"); - if (irq & KVASER_PCIEFD_KCAN_IRQ_TFD) { - u8 count = ioread32(can->reg_base + - KVASER_PCIEFD_KCAN_TX_NPACKETS_REG) & 0xff; - - if (count == 0) - iowrite32(KVASER_PCIEFD_KCAN_CTRL_EFLUSH, - can->reg_base + KVASER_PCIEFD_KCAN_CTRL_REG); - } - if (irq & KVASER_PCIEFD_KCAN_IRQ_BPP) netdev_err(can->can.dev, "Fail to change bittiming, when not in reset mode\n"); From a88638a95407f7581e41563c83ddeb9085931edb Mon Sep 17 00:00:00 2001 From: Jimmy Assarsson Date: Tue, 16 May 2023 15:43:18 +0200 Subject: [PATCH 371/755] can: kvaser_pciefd: Disable interrupts in probe error path commit 11164bc39459335ab93c6e99d53b7e4292fba38b upstream. Disable interrupts in error path of probe function. Fixes: 26ad340e582d ("can: kvaser_pciefd: Add driver for Kvaser PCIEcan devices") Cc: stable@vger.kernel.org Signed-off-by: Jimmy Assarsson Link: https://lore.kernel.org/r/20230516134318.104279-7-extja@kvaser.com Signed-off-by: Marc Kleine-Budde Signed-off-by: Greg Kroah-Hartman --- drivers/net/can/kvaser_pciefd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/can/kvaser_pciefd.c b/drivers/net/can/kvaser_pciefd.c index f0b95bdc9e15..560a0a5ba6f3 100644 --- a/drivers/net/can/kvaser_pciefd.c +++ b/drivers/net/can/kvaser_pciefd.c @@ -1859,6 +1859,8 @@ static int kvaser_pciefd_probe(struct pci_dev *pdev, return 0; err_free_irq: + /* Disable PCI interrupts */ + iowrite32(0, pcie->reg_base + KVASER_PCIEFD_IEN_REG); free_irq(pcie->pci->irq, pcie); err_teardown_can_ctrls: From 1eb3e32de7b1f6ed927dfff3ab3651ce25f3d516 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Tue, 7 Jun 2022 10:09:03 -0400 Subject: [PATCH 372/755] KVM: x86: do not report a vCPU as preempted outside instruction boundaries commit 6cd88243c7e03845a450795e134b488fc2afb736 upstream. If a vCPU is outside guest mode and is scheduled out, it might be in the process of making a memory access. A problem occurs if another vCPU uses the PV TLB flush feature during the period when the vCPU is scheduled out, and a virtual address has already been translated but has not yet been accessed, because this is equivalent to using a stale TLB entry. To avoid this, only report a vCPU as preempted if sure that the guest is at an instruction boundary. A rescheduling request will be delivered to the host physical CPU as an external interrupt, so for simplicity consider any vmexit *not* instruction boundary except for external interrupts. It would in principle be okay to report the vCPU as preempted also if it is sleeping in kvm_vcpu_block(): a TLB flush IPI will incur the vmentry/vmexit overhead unnecessarily, and optimistic spinning is also unlikely to succeed. However, leave it for later because right now kvm_vcpu_check_block() is doing memory accesses. Even though the TLB flush issue only applies to virtual memory address, it's very much preferrable to be conservative. Reported-by: Jann Horn Signed-off-by: Paolo Bonzini [OP: use VCPU_STAT() for debugfs entries] Signed-off-by: Ovidiu Panait Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/kvm_host.h | 3 +++ arch/x86/kvm/svm.c | 3 ++- arch/x86/kvm/vmx/vmx.c | 1 + arch/x86/kvm/x86.c | 22 ++++++++++++++++++++++ 4 files changed, 28 insertions(+), 1 deletion(-) diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 4bc476d7fa6c..80239c84b4dd 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -563,6 +563,7 @@ struct kvm_vcpu_arch { u64 ia32_misc_enable_msr; u64 smbase; u64 smi_count; + bool at_instruction_boundary; bool tpr_access_reporting; u64 ia32_xss; u64 microcode_version; @@ -981,6 +982,8 @@ struct kvm_vcpu_stat { u64 irq_injections; u64 nmi_injections; u64 req_event; + u64 preemption_reported; + u64 preemption_other; }; struct x86_instruction_info; diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index c5a9de8d0725..e9444e202c33 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -6246,7 +6246,8 @@ out: static void svm_handle_exit_irqoff(struct kvm_vcpu *vcpu) { - + if (to_svm(vcpu)->vmcb->control.exit_code == SVM_EXIT_INTR) + vcpu->arch.at_instruction_boundary = true; } static void svm_sched_in(struct kvm_vcpu *vcpu, int cpu) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index 9bd08d264603..c93070829790 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6358,6 +6358,7 @@ static void handle_external_interrupt_irqoff(struct kvm_vcpu *vcpu) ); kvm_after_interrupt(vcpu); + vcpu->arch.at_instruction_boundary = true; } STACK_FRAME_NON_STANDARD(handle_external_interrupt_irqoff); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index f5e9590a8f31..d152afdfa8b4 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -207,6 +207,8 @@ struct kvm_stats_debugfs_item debugfs_entries[] = { { "nmi_injections", VCPU_STAT(nmi_injections) }, { "req_event", VCPU_STAT(req_event) }, { "l1d_flush", VCPU_STAT(l1d_flush) }, + { "preemption_reported", VCPU_STAT(preemption_reported) }, + { "preemption_other", VCPU_STAT(preemption_other) }, { "mmu_shadow_zapped", VM_STAT(mmu_shadow_zapped) }, { "mmu_pte_write", VM_STAT(mmu_pte_write) }, { "mmu_pde_zapped", VM_STAT(mmu_pde_zapped) }, @@ -3562,6 +3564,19 @@ static void kvm_steal_time_set_preempted(struct kvm_vcpu *vcpu) struct kvm_host_map map; struct kvm_steal_time *st; + /* + * The vCPU can be marked preempted if and only if the VM-Exit was on + * an instruction boundary and will not trigger guest emulation of any + * kind (see vcpu_run). Vendor specific code controls (conservatively) + * when this is true, for example allowing the vCPU to be marked + * preempted if and only if the VM-Exit was due to a host interrupt. + */ + if (!vcpu->arch.at_instruction_boundary) { + vcpu->stat.preemption_other++; + return; + } + + vcpu->stat.preemption_reported++; if (!(vcpu->arch.st.msr_val & KVM_MSR_ENABLED)) return; @@ -8446,6 +8461,13 @@ static int vcpu_run(struct kvm_vcpu *vcpu) vcpu->arch.l1tf_flush_l1d = true; for (;;) { + /* + * If another guest vCPU requests a PV TLB flush in the middle + * of instruction emulation, the rest of the emulation could + * use a stale page translation. Assume that any code after + * this point can start executing an instruction. + */ + vcpu->arch.at_instruction_boundary = false; if (kvm_vcpu_running(vcpu)) { r = vcpu_enter_guest(vcpu); } else { From 21f107a959650adba3cee020ed0c0fb983baf0e0 Mon Sep 17 00:00:00 2001 From: Ilya Leoshkevich Date: Thu, 4 May 2023 16:40:20 +0200 Subject: [PATCH 373/755] statfs: enforce statfs[64] structure initialization commit ed40866ec7d328b3dfb70db7e2011640a16202c3 upstream. s390's struct statfs and struct statfs64 contain padding, which field-by-field copying does not set. Initialize the respective structs with zeros before filling them and copying them to userspace, like it's already done for the compat versions of these structs. Found by KMSAN. [agordeev@linux.ibm.com: fixed typo in patch description] Acked-by: Heiko Carstens Cc: stable@vger.kernel.org # v4.14+ Signed-off-by: Ilya Leoshkevich Reviewed-by: Andrew Morton Link: https://lore.kernel.org/r/20230504144021.808932-2-iii@linux.ibm.com Signed-off-by: Alexander Gordeev Signed-off-by: Greg Kroah-Hartman --- fs/statfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/statfs.c b/fs/statfs.c index 2616424012ea..4960c69cc47c 100644 --- a/fs/statfs.c +++ b/fs/statfs.c @@ -128,6 +128,7 @@ static int do_statfs_native(struct kstatfs *st, struct statfs __user *p) if (sizeof(buf) == sizeof(*st)) memcpy(&buf, st, sizeof(*st)); else { + memset(&buf, 0, sizeof(buf)); if (sizeof buf.f_blocks == 4) { if ((st->f_blocks | st->f_bfree | st->f_bavail | st->f_bsize | st->f_frsize) & @@ -156,7 +157,6 @@ static int do_statfs_native(struct kstatfs *st, struct statfs __user *p) buf.f_namelen = st->f_namelen; buf.f_frsize = st->f_frsize; buf.f_flags = st->f_flags; - memset(buf.f_spare, 0, sizeof(buf.f_spare)); } if (copy_to_user(p, &buf, sizeof(buf))) return -EFAULT; @@ -169,6 +169,7 @@ static int do_statfs64(struct kstatfs *st, struct statfs64 __user *p) if (sizeof(buf) == sizeof(*st)) memcpy(&buf, st, sizeof(*st)); else { + memset(&buf, 0, sizeof(buf)); buf.f_type = st->f_type; buf.f_bsize = st->f_bsize; buf.f_blocks = st->f_blocks; @@ -180,7 +181,6 @@ static int do_statfs64(struct kstatfs *st, struct statfs64 __user *p) buf.f_namelen = st->f_namelen; buf.f_frsize = st->f_frsize; buf.f_flags = st->f_flags; - memset(buf.f_spare, 0, sizeof(buf.f_spare)); } if (copy_to_user(p, &buf, sizeof(buf))) return -EFAULT; From 6eb9ed0ab7b587af7774e553b752c4862d7633d5 Mon Sep 17 00:00:00 2001 From: Vitaliy Tomin Date: Sun, 23 Apr 2023 11:45:12 +0800 Subject: [PATCH 374/755] serial: Add support for Advantech PCI-1611U card commit d2b00516de0e1d696724247098f6733a6ea53908 upstream. Add support for Advantech PCI-1611U card Advantech provides opensource drivers for this and many others card based on legacy copy of 8250_pci driver called adv950 https://www.advantech.com/emt/support/details/driver?id=1-TDOIMJ It is hard to maintain to run as out of tree module on newer kernels. Just adding PCI ID to kernel 8250_pci works perfect. Signed-off-by: Vitaliy Tomin Cc: stable Link: https://lore.kernel.org/r/20230423034512.2671157-1-tomin@iszf.irk.ru Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 92e2ee278523..4a3991ac2dd0 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1837,6 +1837,8 @@ pci_moxa_setup(struct serial_private *priv, #define PCI_SUBDEVICE_ID_SIIG_DUAL_30 0x2530 #define PCI_VENDOR_ID_ADVANTECH 0x13fe #define PCI_DEVICE_ID_INTEL_CE4100_UART 0x2e66 +#define PCI_DEVICE_ID_ADVANTECH_PCI1600 0x1600 +#define PCI_DEVICE_ID_ADVANTECH_PCI1600_1611 0x1611 #define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 #define PCI_DEVICE_ID_ADVANTECH_PCI3618 0x3618 #define PCI_DEVICE_ID_ADVANTECH_PCIf618 0xf618 @@ -4157,6 +4159,9 @@ static SIMPLE_DEV_PM_OPS(pciserial_pm_ops, pciserial_suspend_one, pciserial_resume_one); static const struct pci_device_id serial_pci_tbl[] = { + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI1600, + PCI_DEVICE_ID_ADVANTECH_PCI1600_1611, PCI_ANY_ID, 0, 0, + pbn_b0_4_921600 }, /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, From a33c172c1e34f898e1810c694ba15df0f8ebd023 Mon Sep 17 00:00:00 2001 From: Xiubo Li Date: Thu, 18 May 2023 09:47:23 +0800 Subject: [PATCH 375/755] ceph: force updating the msg pointer in non-split case commit 4cafd0400bcb6187c0d4ab4d4b0229a89ac4f8c2 upstream. When the MClientSnap reqeust's op is not CEPH_SNAP_OP_SPLIT the request may still contain a list of 'split_realms', and we need to skip it anyway. Or it will be parsed as a corrupt snaptrace. Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/61200 Reported-by: Frank Schilder Signed-off-by: Xiubo Li Reviewed-by: Ilya Dryomov Signed-off-by: Ilya Dryomov Signed-off-by: Greg Kroah-Hartman --- fs/ceph/snap.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c index 97ce1bd13bad..96c79d5e9f7e 100644 --- a/fs/ceph/snap.c +++ b/fs/ceph/snap.c @@ -1005,6 +1005,19 @@ skip_inode: continue; adjust_snap_realm_parent(mdsc, child, realm->ino); } + } else { + /* + * In the non-split case both 'num_split_inos' and + * 'num_split_realms' should be 0, making this a no-op. + * However the MDS happens to populate 'split_realms' list + * in one of the UPDATE op cases by mistake. + * + * Skip both lists just in case to ensure that 'p' is + * positioned at the start of realm info, as expected by + * ceph_update_snap_trace(). + */ + p += sizeof(u64) * num_split_inos; + p += sizeof(u64) * num_split_realms; } /* From 60b9a9c8f370f05032199a9bd195ff2b2f4cdb53 Mon Sep 17 00:00:00 2001 From: Jerry Snitselaar Date: Wed, 10 May 2023 17:54:03 -0700 Subject: [PATCH 376/755] tpm/tpm_tis: Disable interrupts for more Lenovo devices commit e7d3e5c4b1dd50a70b31524c3228c62bb41bbab2 upstream. The P360 Tiny suffers from an irq storm issue like the T490s, so add an entry for it to tpm_tis_dmi_table, and force polling. There also previously was a report from the previous attempt to enable interrupts that involved a ThinkPad L490. So an entry is added for it as well. Cc: stable@vger.kernel.org Reported-by: Peter Zijlstra # P360 Tiny Closes: https://lore.kernel.org/linux-integrity/20230505130731.GO83892@hirez.programming.kicks-ass.net/ Signed-off-by: Jerry Snitselaar Signed-off-by: Jarkko Sakkinen Signed-off-by: Greg Kroah-Hartman --- drivers/char/tpm/tpm_tis.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/char/tpm/tpm_tis.c b/drivers/char/tpm/tpm_tis.c index 9c61be2afca7..5456d8e2eef2 100644 --- a/drivers/char/tpm/tpm_tis.c +++ b/drivers/char/tpm/tpm_tis.c @@ -83,6 +83,22 @@ static const struct dmi_system_id tpm_tis_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad T490s"), }, }, + { + .callback = tpm_tis_disable_irq, + .ident = "ThinkStation P360 Tiny", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkStation P360 Tiny"), + }, + }, + { + .callback = tpm_tis_disable_irq, + .ident = "ThinkPad L490", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "ThinkPad L490"), + }, + }, {} }; From df89b1753eb1b45c5dc2163b83815ab3f91209a6 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 11 May 2023 21:42:24 +1000 Subject: [PATCH 377/755] powerpc/64s/radix: Fix soft dirty tracking MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 66b2ca086210732954a7790d63d35542936fc664 upstream. It was reported that soft dirty tracking doesn't work when using the Radix MMU. The tracking is supposed to work by clearing the soft dirty bit for a mapping and then write protecting the PTE. If/when the page is written to, a page fault occurs and the soft dirty bit is added back via pte_mkdirty(). For example in wp_page_reuse(): entry = maybe_mkwrite(pte_mkdirty(entry), vma); if (ptep_set_access_flags(vma, vmf->address, vmf->pte, entry, 1)) update_mmu_cache(vma, vmf->address, vmf->pte); Unfortunately on radix _PAGE_SOFTDIRTY is being dropped by radix__ptep_set_access_flags(), called from ptep_set_access_flags(), meaning the soft dirty bit is not set even though the page has been written to. Fix it by adding _PAGE_SOFTDIRTY to the set of bits that are able to be changed in radix__ptep_set_access_flags(). Fixes: b0b5e9b13047 ("powerpc/mm/radix: Add radix pte #defines") Cc: stable@vger.kernel.org # v4.7+ Reported-by: Dan Horák Link: https://lore.kernel.org/r/20230511095558.56663a50f86bdc4cd97700b7@danny.cz Signed-off-by: Michael Ellerman Link: https://msgid.link/20230511114224.977423-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman --- arch/powerpc/mm/book3s64/radix_pgtable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/powerpc/mm/book3s64/radix_pgtable.c b/arch/powerpc/mm/book3s64/radix_pgtable.c index bdcb07a98cd3..dc8f3fb02ac2 100644 --- a/arch/powerpc/mm/book3s64/radix_pgtable.c +++ b/arch/powerpc/mm/book3s64/radix_pgtable.c @@ -1018,8 +1018,8 @@ void radix__ptep_set_access_flags(struct vm_area_struct *vma, pte_t *ptep, pte_t entry, unsigned long address, int psize) { struct mm_struct *mm = vma->vm_mm; - unsigned long set = pte_val(entry) & (_PAGE_DIRTY | _PAGE_ACCESSED | - _PAGE_RW | _PAGE_EXEC); + unsigned long set = pte_val(entry) & (_PAGE_DIRTY | _PAGE_SOFT_DIRTY | + _PAGE_ACCESSED | _PAGE_RW | _PAGE_EXEC); unsigned long change = pte_val(entry) ^ pte_val(*ptep); /* From 116d53f09ff52e6f98e3fe1f85d8898d6ba26c68 Mon Sep 17 00:00:00 2001 From: Ryusuke Konishi Date: Wed, 10 May 2023 00:29:56 +0900 Subject: [PATCH 378/755] nilfs2: fix use-after-free bug of nilfs_root in nilfs_evict_inode() commit 9b5a04ac3ad9898c4745cba46ea26de74ba56a8e upstream. During unmount process of nilfs2, nothing holds nilfs_root structure after nilfs2 detaches its writer in nilfs_detach_log_writer(). However, since nilfs_evict_inode() uses nilfs_root for some cleanup operations, it may cause use-after-free read if inodes are left in "garbage_list" and released by nilfs_dispose_list() at the end of nilfs_detach_log_writer(). Fix this issue by modifying nilfs_evict_inode() to only clear inode without additional metadata changes that use nilfs_root if the file system is degraded to read-only or the writer is detached. Link: https://lkml.kernel.org/r/20230509152956.8313-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Reported-by: syzbot+78d4495558999f55d1da@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/00000000000099e5ac05fb1c3b85@google.com Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- fs/nilfs2/inode.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/fs/nilfs2/inode.c b/fs/nilfs2/inode.c index cf01aa55dd44..53ec342eb787 100644 --- a/fs/nilfs2/inode.c +++ b/fs/nilfs2/inode.c @@ -930,6 +930,7 @@ void nilfs_evict_inode(struct inode *inode) struct nilfs_transaction_info ti; struct super_block *sb = inode->i_sb; struct nilfs_inode_info *ii = NILFS_I(inode); + struct the_nilfs *nilfs; int ret; if (inode->i_nlink || !ii->i_root || unlikely(is_bad_inode(inode))) { @@ -942,6 +943,23 @@ void nilfs_evict_inode(struct inode *inode) truncate_inode_pages_final(&inode->i_data); + nilfs = sb->s_fs_info; + if (unlikely(sb_rdonly(sb) || !nilfs->ns_writer)) { + /* + * If this inode is about to be disposed after the file system + * has been degraded to read-only due to file system corruption + * or after the writer has been detached, do not make any + * changes that cause writes, just clear it. + * Do this check after read-locking ns_segctor_sem by + * nilfs_transaction_begin() in order to avoid a race with + * the writer detach operation. + */ + clear_inode(inode); + nilfs_clear_inode(inode); + nilfs_transaction_abort(sb); + return; + } + /* TODO: some of the following operations may fail. */ nilfs_truncate_bmap(ii, 0); nilfs_mark_inode_dirty(inode); From 25336cd96b034de2c59af65cbbe17f6afb748371 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 May 2023 16:44:27 +0200 Subject: [PATCH 379/755] netfilter: nftables: add nft_parse_register_load() and use it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ 4f16d25c68ec844299a4df6ecbb0234eaf88a935 ] This new function combines the netlink register attribute parser and the load validation function. This update requires to replace: enum nft_registers sreg:8; in many of the expression private areas otherwise compiler complains with: error: cannot take address of bit-field ‘sreg’ when passing the register field as reference. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- include/net/netfilter/nf_tables.h | 2 +- include/net/netfilter/nf_tables_core.h | 4 +-- include/net/netfilter/nft_meta.h | 2 +- net/ipv4/netfilter/nft_dup_ipv4.c | 18 ++++++------- net/ipv6/netfilter/nft_dup_ipv6.c | 18 ++++++------- net/netfilter/nf_tables_api.c | 18 +++++++++++-- net/netfilter/nft_bitwise.c | 6 ++--- net/netfilter/nft_byteorder.c | 6 ++--- net/netfilter/nft_cmp.c | 8 +++--- net/netfilter/nft_ct.c | 5 ++-- net/netfilter/nft_dup_netdev.c | 6 ++--- net/netfilter/nft_dynset.c | 12 ++++----- net/netfilter/nft_exthdr.c | 6 ++--- net/netfilter/nft_fwd_netdev.c | 18 ++++++------- net/netfilter/nft_hash.c | 10 +++++--- net/netfilter/nft_lookup.c | 6 ++--- net/netfilter/nft_masq.c | 18 ++++++------- net/netfilter/nft_meta.c | 3 +-- net/netfilter/nft_nat.c | 35 +++++++++++--------------- net/netfilter/nft_objref.c | 6 ++--- net/netfilter/nft_payload.c | 4 +-- net/netfilter/nft_queue.c | 12 ++++----- net/netfilter/nft_range.c | 6 ++--- net/netfilter/nft_redir.c | 18 ++++++------- net/netfilter/nft_tproxy.c | 14 +++++------ 25 files changed, 129 insertions(+), 132 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index ad2a52a6c478..78181f017681 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -208,7 +208,7 @@ int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest); unsigned int nft_parse_register(const struct nlattr *attr); int nft_dump_register(struct sk_buff *skb, unsigned int attr, unsigned int reg); -int nft_validate_register_load(enum nft_registers reg, unsigned int len); +int nft_parse_register_load(const struct nlattr *attr, u8 *sreg, u32 len); int nft_validate_register_store(const struct nft_ctx *ctx, enum nft_registers reg, const struct nft_data *data, diff --git a/include/net/netfilter/nf_tables_core.h b/include/net/netfilter/nf_tables_core.h index 7281895fa6d9..c57ecb9e157c 100644 --- a/include/net/netfilter/nf_tables_core.h +++ b/include/net/netfilter/nf_tables_core.h @@ -25,7 +25,7 @@ void nf_tables_core_module_exit(void); struct nft_cmp_fast_expr { u32 data; - enum nft_registers sreg:8; + u8 sreg; u8 len; }; @@ -58,7 +58,7 @@ struct nft_payload_set { enum nft_payload_bases base:8; u8 offset; u8 len; - enum nft_registers sreg:8; + u8 sreg; u8 csum_type; u8 csum_offset; u8 csum_flags; diff --git a/include/net/netfilter/nft_meta.h b/include/net/netfilter/nft_meta.h index 07e2fd507963..946fa8c83798 100644 --- a/include/net/netfilter/nft_meta.h +++ b/include/net/netfilter/nft_meta.h @@ -8,7 +8,7 @@ struct nft_meta { enum nft_meta_keys key:8; union { enum nft_registers dreg:8; - enum nft_registers sreg:8; + u8 sreg; }; }; diff --git a/net/ipv4/netfilter/nft_dup_ipv4.c b/net/ipv4/netfilter/nft_dup_ipv4.c index abf89b972094..330349b5d6a4 100644 --- a/net/ipv4/netfilter/nft_dup_ipv4.c +++ b/net/ipv4/netfilter/nft_dup_ipv4.c @@ -13,8 +13,8 @@ #include struct nft_dup_ipv4 { - enum nft_registers sreg_addr:8; - enum nft_registers sreg_dev:8; + u8 sreg_addr; + u8 sreg_dev; }; static void nft_dup_ipv4_eval(const struct nft_expr *expr, @@ -40,16 +40,16 @@ static int nft_dup_ipv4_init(const struct nft_ctx *ctx, if (tb[NFTA_DUP_SREG_ADDR] == NULL) return -EINVAL; - priv->sreg_addr = nft_parse_register(tb[NFTA_DUP_SREG_ADDR]); - err = nft_validate_register_load(priv->sreg_addr, sizeof(struct in_addr)); + err = nft_parse_register_load(tb[NFTA_DUP_SREG_ADDR], &priv->sreg_addr, + sizeof(struct in_addr)); if (err < 0) return err; - if (tb[NFTA_DUP_SREG_DEV] != NULL) { - priv->sreg_dev = nft_parse_register(tb[NFTA_DUP_SREG_DEV]); - return nft_validate_register_load(priv->sreg_dev, sizeof(int)); - } - return 0; + if (tb[NFTA_DUP_SREG_DEV]) + err = nft_parse_register_load(tb[NFTA_DUP_SREG_DEV], + &priv->sreg_dev, sizeof(int)); + + return err; } static int nft_dup_ipv4_dump(struct sk_buff *skb, const struct nft_expr *expr) diff --git a/net/ipv6/netfilter/nft_dup_ipv6.c b/net/ipv6/netfilter/nft_dup_ipv6.c index 2af32200507d..c4aa8d27e040 100644 --- a/net/ipv6/netfilter/nft_dup_ipv6.c +++ b/net/ipv6/netfilter/nft_dup_ipv6.c @@ -13,8 +13,8 @@ #include struct nft_dup_ipv6 { - enum nft_registers sreg_addr:8; - enum nft_registers sreg_dev:8; + u8 sreg_addr; + u8 sreg_dev; }; static void nft_dup_ipv6_eval(const struct nft_expr *expr, @@ -38,16 +38,16 @@ static int nft_dup_ipv6_init(const struct nft_ctx *ctx, if (tb[NFTA_DUP_SREG_ADDR] == NULL) return -EINVAL; - priv->sreg_addr = nft_parse_register(tb[NFTA_DUP_SREG_ADDR]); - err = nft_validate_register_load(priv->sreg_addr, sizeof(struct in6_addr)); + err = nft_parse_register_load(tb[NFTA_DUP_SREG_ADDR], &priv->sreg_addr, + sizeof(struct in6_addr)); if (err < 0) return err; - if (tb[NFTA_DUP_SREG_DEV] != NULL) { - priv->sreg_dev = nft_parse_register(tb[NFTA_DUP_SREG_DEV]); - return nft_validate_register_load(priv->sreg_dev, sizeof(int)); - } - return 0; + if (tb[NFTA_DUP_SREG_DEV]) + err = nft_parse_register_load(tb[NFTA_DUP_SREG_DEV], + &priv->sreg_dev, sizeof(int)); + + return err; } static int nft_dup_ipv6_dump(struct sk_buff *skb, const struct nft_expr *expr) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 7794fa4c669d..26390fb98621 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -7432,7 +7432,7 @@ EXPORT_SYMBOL_GPL(nft_dump_register); * Validate that the input register is one of the general purpose * registers and that the length of the load is within the bounds. */ -int nft_validate_register_load(enum nft_registers reg, unsigned int len) +static int nft_validate_register_load(enum nft_registers reg, unsigned int len) { if (reg < NFT_REG_1 * NFT_REG_SIZE / NFT_REG32_SIZE) return -EINVAL; @@ -7443,7 +7443,21 @@ int nft_validate_register_load(enum nft_registers reg, unsigned int len) return 0; } -EXPORT_SYMBOL_GPL(nft_validate_register_load); + +int nft_parse_register_load(const struct nlattr *attr, u8 *sreg, u32 len) +{ + u32 reg; + int err; + + reg = nft_parse_register(attr); + err = nft_validate_register_load(reg, len); + if (err < 0) + return err; + + *sreg = reg; + return 0; +} +EXPORT_SYMBOL_GPL(nft_parse_register_load); /** * nft_validate_register_store - validate an expressions' register store diff --git a/net/netfilter/nft_bitwise.c b/net/netfilter/nft_bitwise.c index 10e9d50e4e19..850c6b5713b4 100644 --- a/net/netfilter/nft_bitwise.c +++ b/net/netfilter/nft_bitwise.c @@ -16,7 +16,7 @@ #include struct nft_bitwise { - enum nft_registers sreg:8; + u8 sreg; enum nft_registers dreg:8; u8 len; struct nft_data mask; @@ -65,8 +65,8 @@ static int nft_bitwise_init(const struct nft_ctx *ctx, priv->len = len; - priv->sreg = nft_parse_register(tb[NFTA_BITWISE_SREG]); - err = nft_validate_register_load(priv->sreg, priv->len); + err = nft_parse_register_load(tb[NFTA_BITWISE_SREG], &priv->sreg, + priv->len); if (err < 0) return err; diff --git a/net/netfilter/nft_byteorder.c b/net/netfilter/nft_byteorder.c index 12bed3f7bbc6..0960563cd5a1 100644 --- a/net/netfilter/nft_byteorder.c +++ b/net/netfilter/nft_byteorder.c @@ -16,7 +16,7 @@ #include struct nft_byteorder { - enum nft_registers sreg:8; + u8 sreg; enum nft_registers dreg:8; enum nft_byteorder_ops op:8; u8 len; @@ -131,14 +131,14 @@ static int nft_byteorder_init(const struct nft_ctx *ctx, return -EINVAL; } - priv->sreg = nft_parse_register(tb[NFTA_BYTEORDER_SREG]); err = nft_parse_u32_check(tb[NFTA_BYTEORDER_LEN], U8_MAX, &len); if (err < 0) return err; priv->len = len; - err = nft_validate_register_load(priv->sreg, priv->len); + err = nft_parse_register_load(tb[NFTA_BYTEORDER_SREG], &priv->sreg, + priv->len); if (err < 0) return err; diff --git a/net/netfilter/nft_cmp.c b/net/netfilter/nft_cmp.c index ae730dba60c8..a7c1e7c4381a 100644 --- a/net/netfilter/nft_cmp.c +++ b/net/netfilter/nft_cmp.c @@ -17,7 +17,7 @@ struct nft_cmp_expr { struct nft_data data; - enum nft_registers sreg:8; + u8 sreg; u8 len; enum nft_cmp_ops op:8; }; @@ -86,8 +86,7 @@ static int nft_cmp_init(const struct nft_ctx *ctx, const struct nft_expr *expr, return err; } - priv->sreg = nft_parse_register(tb[NFTA_CMP_SREG]); - err = nft_validate_register_load(priv->sreg, desc.len); + err = nft_parse_register_load(tb[NFTA_CMP_SREG], &priv->sreg, desc.len); if (err < 0) return err; @@ -169,8 +168,7 @@ static int nft_cmp_fast_init(const struct nft_ctx *ctx, if (err < 0) return err; - priv->sreg = nft_parse_register(tb[NFTA_CMP_SREG]); - err = nft_validate_register_load(priv->sreg, desc.len); + err = nft_parse_register_load(tb[NFTA_CMP_SREG], &priv->sreg, desc.len); if (err < 0) return err; diff --git a/net/netfilter/nft_ct.c b/net/netfilter/nft_ct.c index 28991730728b..edc6b8ae0648 100644 --- a/net/netfilter/nft_ct.c +++ b/net/netfilter/nft_ct.c @@ -28,7 +28,7 @@ struct nft_ct { enum ip_conntrack_dir dir:8; union { enum nft_registers dreg:8; - enum nft_registers sreg:8; + u8 sreg; }; }; @@ -600,8 +600,7 @@ static int nft_ct_set_init(const struct nft_ctx *ctx, } } - priv->sreg = nft_parse_register(tb[NFTA_CT_SREG]); - err = nft_validate_register_load(priv->sreg, len); + err = nft_parse_register_load(tb[NFTA_CT_SREG], &priv->sreg, len); if (err < 0) goto err1; diff --git a/net/netfilter/nft_dup_netdev.c b/net/netfilter/nft_dup_netdev.c index 6007089e1c2f..a5b560ee0337 100644 --- a/net/netfilter/nft_dup_netdev.c +++ b/net/netfilter/nft_dup_netdev.c @@ -14,7 +14,7 @@ #include struct nft_dup_netdev { - enum nft_registers sreg_dev:8; + u8 sreg_dev; }; static void nft_dup_netdev_eval(const struct nft_expr *expr, @@ -40,8 +40,8 @@ static int nft_dup_netdev_init(const struct nft_ctx *ctx, if (tb[NFTA_DUP_SREG_DEV] == NULL) return -EINVAL; - priv->sreg_dev = nft_parse_register(tb[NFTA_DUP_SREG_DEV]); - return nft_validate_register_load(priv->sreg_dev, sizeof(int)); + return nft_parse_register_load(tb[NFTA_DUP_SREG_DEV], &priv->sreg_dev, + sizeof(int)); } static int nft_dup_netdev_dump(struct sk_buff *skb, const struct nft_expr *expr) diff --git a/net/netfilter/nft_dynset.c b/net/netfilter/nft_dynset.c index 7f9e6c90f727..9f064f7b31d6 100644 --- a/net/netfilter/nft_dynset.c +++ b/net/netfilter/nft_dynset.c @@ -16,8 +16,8 @@ struct nft_dynset { struct nft_set *set; struct nft_set_ext_tmpl tmpl; enum nft_dynset_ops op:8; - enum nft_registers sreg_key:8; - enum nft_registers sreg_data:8; + u8 sreg_key; + u8 sreg_data; bool invert; u64 timeout; struct nft_expr *expr; @@ -177,8 +177,8 @@ static int nft_dynset_init(const struct nft_ctx *ctx, return err; } - priv->sreg_key = nft_parse_register(tb[NFTA_DYNSET_SREG_KEY]); - err = nft_validate_register_load(priv->sreg_key, set->klen); + err = nft_parse_register_load(tb[NFTA_DYNSET_SREG_KEY], &priv->sreg_key, + set->klen); if (err < 0) return err; @@ -188,8 +188,8 @@ static int nft_dynset_init(const struct nft_ctx *ctx, if (set->dtype == NFT_DATA_VERDICT) return -EOPNOTSUPP; - priv->sreg_data = nft_parse_register(tb[NFTA_DYNSET_SREG_DATA]); - err = nft_validate_register_load(priv->sreg_data, set->dlen); + err = nft_parse_register_load(tb[NFTA_DYNSET_SREG_DATA], + &priv->sreg_data, set->dlen); if (err < 0) return err; } else if (set->flags & NFT_SET_MAP) diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c index faa0844c01fb..f2b36b9c2b53 100644 --- a/net/netfilter/nft_exthdr.c +++ b/net/netfilter/nft_exthdr.c @@ -20,7 +20,7 @@ struct nft_exthdr { u8 len; u8 op; enum nft_registers dreg:8; - enum nft_registers sreg:8; + u8 sreg; u8 flags; }; @@ -403,11 +403,11 @@ static int nft_exthdr_tcp_set_init(const struct nft_ctx *ctx, priv->type = nla_get_u8(tb[NFTA_EXTHDR_TYPE]); priv->offset = offset; priv->len = len; - priv->sreg = nft_parse_register(tb[NFTA_EXTHDR_SREG]); priv->flags = flags; priv->op = op; - return nft_validate_register_load(priv->sreg, priv->len); + return nft_parse_register_load(tb[NFTA_EXTHDR_SREG], &priv->sreg, + priv->len); } static int nft_exthdr_ipv4_init(const struct nft_ctx *ctx, diff --git a/net/netfilter/nft_fwd_netdev.c b/net/netfilter/nft_fwd_netdev.c index 3b0dcd170551..7730409f6f09 100644 --- a/net/netfilter/nft_fwd_netdev.c +++ b/net/netfilter/nft_fwd_netdev.c @@ -18,7 +18,7 @@ #include struct nft_fwd_netdev { - enum nft_registers sreg_dev:8; + u8 sreg_dev; }; static void nft_fwd_netdev_eval(const struct nft_expr *expr, @@ -50,8 +50,8 @@ static int nft_fwd_netdev_init(const struct nft_ctx *ctx, if (tb[NFTA_FWD_SREG_DEV] == NULL) return -EINVAL; - priv->sreg_dev = nft_parse_register(tb[NFTA_FWD_SREG_DEV]); - return nft_validate_register_load(priv->sreg_dev, sizeof(int)); + return nft_parse_register_load(tb[NFTA_FWD_SREG_DEV], &priv->sreg_dev, + sizeof(int)); } static int nft_fwd_netdev_dump(struct sk_buff *skb, const struct nft_expr *expr) @@ -83,8 +83,8 @@ static bool nft_fwd_netdev_offload_action(const struct nft_expr *expr) } struct nft_fwd_neigh { - enum nft_registers sreg_dev:8; - enum nft_registers sreg_addr:8; + u8 sreg_dev; + u8 sreg_addr; u8 nfproto; }; @@ -162,8 +162,6 @@ static int nft_fwd_neigh_init(const struct nft_ctx *ctx, !tb[NFTA_FWD_NFPROTO]) return -EINVAL; - priv->sreg_dev = nft_parse_register(tb[NFTA_FWD_SREG_DEV]); - priv->sreg_addr = nft_parse_register(tb[NFTA_FWD_SREG_ADDR]); priv->nfproto = ntohl(nla_get_be32(tb[NFTA_FWD_NFPROTO])); switch (priv->nfproto) { @@ -177,11 +175,13 @@ static int nft_fwd_neigh_init(const struct nft_ctx *ctx, return -EOPNOTSUPP; } - err = nft_validate_register_load(priv->sreg_dev, sizeof(int)); + err = nft_parse_register_load(tb[NFTA_FWD_SREG_DEV], &priv->sreg_dev, + sizeof(int)); if (err < 0) return err; - return nft_validate_register_load(priv->sreg_addr, addr_len); + return nft_parse_register_load(tb[NFTA_FWD_SREG_ADDR], &priv->sreg_addr, + addr_len); } static int nft_fwd_neigh_dump(struct sk_buff *skb, const struct nft_expr *expr) diff --git a/net/netfilter/nft_hash.c b/net/netfilter/nft_hash.c index b836d550b919..3b01ad0a02df 100644 --- a/net/netfilter/nft_hash.c +++ b/net/netfilter/nft_hash.c @@ -14,7 +14,7 @@ #include struct nft_jhash { - enum nft_registers sreg:8; + u8 sreg; enum nft_registers dreg:8; u8 len; bool autogen_seed:1; @@ -83,7 +83,6 @@ static int nft_jhash_init(const struct nft_ctx *ctx, if (tb[NFTA_HASH_OFFSET]) priv->offset = ntohl(nla_get_be32(tb[NFTA_HASH_OFFSET])); - priv->sreg = nft_parse_register(tb[NFTA_HASH_SREG]); priv->dreg = nft_parse_register(tb[NFTA_HASH_DREG]); err = nft_parse_u32_check(tb[NFTA_HASH_LEN], U8_MAX, &len); @@ -94,6 +93,10 @@ static int nft_jhash_init(const struct nft_ctx *ctx, priv->len = len; + err = nft_parse_register_load(tb[NFTA_HASH_SREG], &priv->sreg, len); + if (err < 0) + return err; + priv->modulus = ntohl(nla_get_be32(tb[NFTA_HASH_MODULUS])); if (priv->modulus < 1) return -ERANGE; @@ -108,8 +111,7 @@ static int nft_jhash_init(const struct nft_ctx *ctx, get_random_bytes(&priv->seed, sizeof(priv->seed)); } - return nft_validate_register_load(priv->sreg, len) && - nft_validate_register_store(ctx, priv->dreg, NULL, + return nft_validate_register_store(ctx, priv->dreg, NULL, NFT_DATA_VALUE, sizeof(u32)); } diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c index 4eb4d076927e..349591dabb36 100644 --- a/net/netfilter/nft_lookup.c +++ b/net/netfilter/nft_lookup.c @@ -17,7 +17,7 @@ struct nft_lookup { struct nft_set *set; - enum nft_registers sreg:8; + u8 sreg; enum nft_registers dreg:8; bool invert; struct nft_set_binding binding; @@ -73,8 +73,8 @@ static int nft_lookup_init(const struct nft_ctx *ctx, if (IS_ERR(set)) return PTR_ERR(set); - priv->sreg = nft_parse_register(tb[NFTA_LOOKUP_SREG]); - err = nft_validate_register_load(priv->sreg, set->klen); + err = nft_parse_register_load(tb[NFTA_LOOKUP_SREG], &priv->sreg, + set->klen); if (err < 0) return err; diff --git a/net/netfilter/nft_masq.c b/net/netfilter/nft_masq.c index 39dc94f2491e..c2f04885347e 100644 --- a/net/netfilter/nft_masq.c +++ b/net/netfilter/nft_masq.c @@ -15,8 +15,8 @@ struct nft_masq { u32 flags; - enum nft_registers sreg_proto_min:8; - enum nft_registers sreg_proto_max:8; + u8 sreg_proto_min; + u8 sreg_proto_max; }; static const struct nla_policy nft_masq_policy[NFTA_MASQ_MAX + 1] = { @@ -54,19 +54,15 @@ static int nft_masq_init(const struct nft_ctx *ctx, } if (tb[NFTA_MASQ_REG_PROTO_MIN]) { - priv->sreg_proto_min = - nft_parse_register(tb[NFTA_MASQ_REG_PROTO_MIN]); - - err = nft_validate_register_load(priv->sreg_proto_min, plen); + err = nft_parse_register_load(tb[NFTA_MASQ_REG_PROTO_MIN], + &priv->sreg_proto_min, plen); if (err < 0) return err; if (tb[NFTA_MASQ_REG_PROTO_MAX]) { - priv->sreg_proto_max = - nft_parse_register(tb[NFTA_MASQ_REG_PROTO_MAX]); - - err = nft_validate_register_load(priv->sreg_proto_max, - plen); + err = nft_parse_register_load(tb[NFTA_MASQ_REG_PROTO_MAX], + &priv->sreg_proto_max, + plen); if (err < 0) return err; } else { diff --git a/net/netfilter/nft_meta.c b/net/netfilter/nft_meta.c index dda1e55d5801..28761430d9ee 100644 --- a/net/netfilter/nft_meta.c +++ b/net/netfilter/nft_meta.c @@ -475,8 +475,7 @@ int nft_meta_set_init(const struct nft_ctx *ctx, return -EOPNOTSUPP; } - priv->sreg = nft_parse_register(tb[NFTA_META_SREG]); - err = nft_validate_register_load(priv->sreg, len); + err = nft_parse_register_load(tb[NFTA_META_SREG], &priv->sreg, len); if (err < 0) return err; diff --git a/net/netfilter/nft_nat.c b/net/netfilter/nft_nat.c index 0c5bc3c37ecf..50fbd3c1d9f1 100644 --- a/net/netfilter/nft_nat.c +++ b/net/netfilter/nft_nat.c @@ -21,10 +21,10 @@ #include struct nft_nat { - enum nft_registers sreg_addr_min:8; - enum nft_registers sreg_addr_max:8; - enum nft_registers sreg_proto_min:8; - enum nft_registers sreg_proto_max:8; + u8 sreg_addr_min; + u8 sreg_addr_max; + u8 sreg_proto_min; + u8 sreg_proto_max; enum nf_nat_manip_type type:8; u8 family; u16 flags; @@ -154,18 +154,15 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr, priv->family = family; if (tb[NFTA_NAT_REG_ADDR_MIN]) { - priv->sreg_addr_min = - nft_parse_register(tb[NFTA_NAT_REG_ADDR_MIN]); - err = nft_validate_register_load(priv->sreg_addr_min, alen); + err = nft_parse_register_load(tb[NFTA_NAT_REG_ADDR_MIN], + &priv->sreg_addr_min, alen); if (err < 0) return err; if (tb[NFTA_NAT_REG_ADDR_MAX]) { - priv->sreg_addr_max = - nft_parse_register(tb[NFTA_NAT_REG_ADDR_MAX]); - - err = nft_validate_register_load(priv->sreg_addr_max, - alen); + err = nft_parse_register_load(tb[NFTA_NAT_REG_ADDR_MAX], + &priv->sreg_addr_max, + alen); if (err < 0) return err; } else { @@ -175,19 +172,15 @@ static int nft_nat_init(const struct nft_ctx *ctx, const struct nft_expr *expr, plen = FIELD_SIZEOF(struct nf_nat_range, min_addr.all); if (tb[NFTA_NAT_REG_PROTO_MIN]) { - priv->sreg_proto_min = - nft_parse_register(tb[NFTA_NAT_REG_PROTO_MIN]); - - err = nft_validate_register_load(priv->sreg_proto_min, plen); + err = nft_parse_register_load(tb[NFTA_NAT_REG_PROTO_MIN], + &priv->sreg_proto_min, plen); if (err < 0) return err; if (tb[NFTA_NAT_REG_PROTO_MAX]) { - priv->sreg_proto_max = - nft_parse_register(tb[NFTA_NAT_REG_PROTO_MAX]); - - err = nft_validate_register_load(priv->sreg_proto_max, - plen); + err = nft_parse_register_load(tb[NFTA_NAT_REG_PROTO_MAX], + &priv->sreg_proto_max, + plen); if (err < 0) return err; } else { diff --git a/net/netfilter/nft_objref.c b/net/netfilter/nft_objref.c index 74c61278e6bd..7032b80592b2 100644 --- a/net/netfilter/nft_objref.c +++ b/net/netfilter/nft_objref.c @@ -95,7 +95,7 @@ static const struct nft_expr_ops nft_objref_ops = { struct nft_objref_map { struct nft_set *set; - enum nft_registers sreg:8; + u8 sreg; struct nft_set_binding binding; }; @@ -137,8 +137,8 @@ static int nft_objref_map_init(const struct nft_ctx *ctx, if (!(set->flags & NFT_SET_OBJECT)) return -EINVAL; - priv->sreg = nft_parse_register(tb[NFTA_OBJREF_SET_SREG]); - err = nft_validate_register_load(priv->sreg, set->klen); + err = nft_parse_register_load(tb[NFTA_OBJREF_SET_SREG], &priv->sreg, + set->klen); if (err < 0) return err; diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c index 6ed6ccef5e1a..ce670c959a99 100644 --- a/net/netfilter/nft_payload.c +++ b/net/netfilter/nft_payload.c @@ -564,7 +564,6 @@ static int nft_payload_set_init(const struct nft_ctx *ctx, priv->base = ntohl(nla_get_be32(tb[NFTA_PAYLOAD_BASE])); priv->offset = ntohl(nla_get_be32(tb[NFTA_PAYLOAD_OFFSET])); priv->len = ntohl(nla_get_be32(tb[NFTA_PAYLOAD_LEN])); - priv->sreg = nft_parse_register(tb[NFTA_PAYLOAD_SREG]); if (tb[NFTA_PAYLOAD_CSUM_TYPE]) csum_type = ntohl(nla_get_be32(tb[NFTA_PAYLOAD_CSUM_TYPE])); @@ -595,7 +594,8 @@ static int nft_payload_set_init(const struct nft_ctx *ctx, } priv->csum_type = csum_type; - return nft_validate_register_load(priv->sreg, priv->len); + return nft_parse_register_load(tb[NFTA_PAYLOAD_SREG], &priv->sreg, + priv->len); } static int nft_payload_set_dump(struct sk_buff *skb, const struct nft_expr *expr) diff --git a/net/netfilter/nft_queue.c b/net/netfilter/nft_queue.c index 5ece0a6aa8c3..94a4f0a5a28e 100644 --- a/net/netfilter/nft_queue.c +++ b/net/netfilter/nft_queue.c @@ -19,10 +19,10 @@ static u32 jhash_initval __read_mostly; struct nft_queue { - enum nft_registers sreg_qnum:8; - u16 queuenum; - u16 queues_total; - u16 flags; + u8 sreg_qnum; + u16 queuenum; + u16 queues_total; + u16 flags; }; static void nft_queue_eval(const struct nft_expr *expr, @@ -111,8 +111,8 @@ static int nft_queue_sreg_init(const struct nft_ctx *ctx, struct nft_queue *priv = nft_expr_priv(expr); int err; - priv->sreg_qnum = nft_parse_register(tb[NFTA_QUEUE_SREG_QNUM]); - err = nft_validate_register_load(priv->sreg_qnum, sizeof(u32)); + err = nft_parse_register_load(tb[NFTA_QUEUE_SREG_QNUM], + &priv->sreg_qnum, sizeof(u32)); if (err < 0) return err; diff --git a/net/netfilter/nft_range.c b/net/netfilter/nft_range.c index 89efcc5a533d..e4a1c44d7f51 100644 --- a/net/netfilter/nft_range.c +++ b/net/netfilter/nft_range.c @@ -15,7 +15,7 @@ struct nft_range_expr { struct nft_data data_from; struct nft_data data_to; - enum nft_registers sreg:8; + u8 sreg; u8 len; enum nft_range_ops op:8; }; @@ -86,8 +86,8 @@ static int nft_range_init(const struct nft_ctx *ctx, const struct nft_expr *expr goto err2; } - priv->sreg = nft_parse_register(tb[NFTA_RANGE_SREG]); - err = nft_validate_register_load(priv->sreg, desc_from.len); + err = nft_parse_register_load(tb[NFTA_RANGE_SREG], &priv->sreg, + desc_from.len); if (err < 0) goto err2; diff --git a/net/netfilter/nft_redir.c b/net/netfilter/nft_redir.c index d75de63189b6..81a191eb5c36 100644 --- a/net/netfilter/nft_redir.c +++ b/net/netfilter/nft_redir.c @@ -14,8 +14,8 @@ #include struct nft_redir { - enum nft_registers sreg_proto_min:8; - enum nft_registers sreg_proto_max:8; + u8 sreg_proto_min; + u8 sreg_proto_max; u16 flags; }; @@ -50,19 +50,15 @@ static int nft_redir_init(const struct nft_ctx *ctx, plen = FIELD_SIZEOF(struct nf_nat_range, min_addr.all); if (tb[NFTA_REDIR_REG_PROTO_MIN]) { - priv->sreg_proto_min = - nft_parse_register(tb[NFTA_REDIR_REG_PROTO_MIN]); - - err = nft_validate_register_load(priv->sreg_proto_min, plen); + err = nft_parse_register_load(tb[NFTA_REDIR_REG_PROTO_MIN], + &priv->sreg_proto_min, plen); if (err < 0) return err; if (tb[NFTA_REDIR_REG_PROTO_MAX]) { - priv->sreg_proto_max = - nft_parse_register(tb[NFTA_REDIR_REG_PROTO_MAX]); - - err = nft_validate_register_load(priv->sreg_proto_max, - plen); + err = nft_parse_register_load(tb[NFTA_REDIR_REG_PROTO_MAX], + &priv->sreg_proto_max, + plen); if (err < 0) return err; } else { diff --git a/net/netfilter/nft_tproxy.c b/net/netfilter/nft_tproxy.c index a0e30bf4a845..db780b5985ab 100644 --- a/net/netfilter/nft_tproxy.c +++ b/net/netfilter/nft_tproxy.c @@ -13,9 +13,9 @@ #endif struct nft_tproxy { - enum nft_registers sreg_addr:8; - enum nft_registers sreg_port:8; - u8 family; + u8 sreg_addr; + u8 sreg_port; + u8 family; }; static void nft_tproxy_eval_v4(const struct nft_expr *expr, @@ -254,15 +254,15 @@ static int nft_tproxy_init(const struct nft_ctx *ctx, } if (tb[NFTA_TPROXY_REG_ADDR]) { - priv->sreg_addr = nft_parse_register(tb[NFTA_TPROXY_REG_ADDR]); - err = nft_validate_register_load(priv->sreg_addr, alen); + err = nft_parse_register_load(tb[NFTA_TPROXY_REG_ADDR], + &priv->sreg_addr, alen); if (err < 0) return err; } if (tb[NFTA_TPROXY_REG_PORT]) { - priv->sreg_port = nft_parse_register(tb[NFTA_TPROXY_REG_PORT]); - err = nft_validate_register_load(priv->sreg_port, sizeof(u16)); + err = nft_parse_register_load(tb[NFTA_TPROXY_REG_PORT], + &priv->sreg_port, sizeof(u16)); if (err < 0) return err; } From 7c788393d45335f6fc5133a72545cfc23abfdebd Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 May 2023 16:44:28 +0200 Subject: [PATCH 380/755] netfilter: nftables: add nft_parse_register_store() and use it MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ 345023b0db315648ccc3c1a36aee88304a8b4d91 ] This new function combines the netlink register attribute parser and the store validation function. This update requires to replace: enum nft_registers dreg:8; in many of the expression private areas otherwise compiler complains with: error: cannot take address of bit-field ‘dreg’ when passing the register field as reference. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- include/net/netfilter/nf_tables.h | 8 +++--- include/net/netfilter/nf_tables_core.h | 4 +-- include/net/netfilter/nft_fib.h | 2 +- include/net/netfilter/nft_meta.h | 2 +- net/bridge/netfilter/nft_meta_bridge.c | 5 ++-- net/netfilter/nf_tables_api.c | 34 ++++++++++++++++++++++---- net/netfilter/nft_bitwise.c | 8 +++--- net/netfilter/nft_byteorder.c | 8 +++--- net/netfilter/nft_ct.c | 7 +++--- net/netfilter/nft_exthdr.c | 8 +++--- net/netfilter/nft_fib.c | 5 ++-- net/netfilter/nft_hash.c | 17 ++++++------- net/netfilter/nft_immediate.c | 6 ++--- net/netfilter/nft_lookup.c | 8 +++--- net/netfilter/nft_meta.c | 5 ++-- net/netfilter/nft_numgen.c | 15 +++++------- net/netfilter/nft_osf.c | 8 +++--- net/netfilter/nft_payload.c | 6 ++--- net/netfilter/nft_rt.c | 7 +++--- net/netfilter/nft_socket.c | 7 +++--- net/netfilter/nft_tunnel.c | 8 +++--- net/netfilter/nft_xfrm.c | 7 +++--- 22 files changed, 97 insertions(+), 88 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 78181f017681..446f70132d82 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -209,10 +209,10 @@ unsigned int nft_parse_register(const struct nlattr *attr); int nft_dump_register(struct sk_buff *skb, unsigned int attr, unsigned int reg); int nft_parse_register_load(const struct nlattr *attr, u8 *sreg, u32 len); -int nft_validate_register_store(const struct nft_ctx *ctx, - enum nft_registers reg, - const struct nft_data *data, - enum nft_data_types type, unsigned int len); +int nft_parse_register_store(const struct nft_ctx *ctx, + const struct nlattr *attr, u8 *dreg, + const struct nft_data *data, + enum nft_data_types type, unsigned int len); /** * struct nft_userdata - user defined data associated with an object diff --git a/include/net/netfilter/nf_tables_core.h b/include/net/netfilter/nf_tables_core.h index c57ecb9e157c..6a3fd54c69c1 100644 --- a/include/net/netfilter/nf_tables_core.h +++ b/include/net/netfilter/nf_tables_core.h @@ -31,7 +31,7 @@ struct nft_cmp_fast_expr { struct nft_immediate_expr { struct nft_data data; - enum nft_registers dreg:8; + u8 dreg; u8 dlen; }; @@ -51,7 +51,7 @@ struct nft_payload { enum nft_payload_bases base:8; u8 offset; u8 len; - enum nft_registers dreg:8; + u8 dreg; }; struct nft_payload_set { diff --git a/include/net/netfilter/nft_fib.h b/include/net/netfilter/nft_fib.h index 628b6fa579cd..237f3757637e 100644 --- a/include/net/netfilter/nft_fib.h +++ b/include/net/netfilter/nft_fib.h @@ -5,7 +5,7 @@ #include struct nft_fib { - enum nft_registers dreg:8; + u8 dreg; u8 result; u32 flags; }; diff --git a/include/net/netfilter/nft_meta.h b/include/net/netfilter/nft_meta.h index 946fa8c83798..2dce55c736f4 100644 --- a/include/net/netfilter/nft_meta.h +++ b/include/net/netfilter/nft_meta.h @@ -7,7 +7,7 @@ struct nft_meta { enum nft_meta_keys key:8; union { - enum nft_registers dreg:8; + u8 dreg; u8 sreg; }; }; diff --git a/net/bridge/netfilter/nft_meta_bridge.c b/net/bridge/netfilter/nft_meta_bridge.c index 7c9e92b2f806..0c28fa4647b7 100644 --- a/net/bridge/netfilter/nft_meta_bridge.c +++ b/net/bridge/netfilter/nft_meta_bridge.c @@ -87,9 +87,8 @@ static int nft_meta_bridge_get_init(const struct nft_ctx *ctx, return nft_meta_get_init(ctx, expr, tb); } - priv->dreg = nft_parse_register(tb[NFTA_META_DREG]); - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, len); + return nft_parse_register_store(ctx, tb[NFTA_META_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, len); } static struct nft_expr_type nft_meta_bridge_type; diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 26390fb98621..0ccbe8751085 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -3839,6 +3839,12 @@ static int nf_tables_delset(struct net *net, struct sock *nlsk, return nft_delset(&ctx, set); } +static int nft_validate_register_store(const struct nft_ctx *ctx, + enum nft_registers reg, + const struct nft_data *data, + enum nft_data_types type, + unsigned int len); + static int nf_tables_bind_check_setelem(const struct nft_ctx *ctx, struct nft_set *set, const struct nft_set_iter *iter, @@ -7473,10 +7479,11 @@ EXPORT_SYMBOL_GPL(nft_parse_register_load); * A value of NULL for the data means that its runtime gathered * data. */ -int nft_validate_register_store(const struct nft_ctx *ctx, - enum nft_registers reg, - const struct nft_data *data, - enum nft_data_types type, unsigned int len) +static int nft_validate_register_store(const struct nft_ctx *ctx, + enum nft_registers reg, + const struct nft_data *data, + enum nft_data_types type, + unsigned int len) { int err; @@ -7508,7 +7515,24 @@ int nft_validate_register_store(const struct nft_ctx *ctx, return 0; } } -EXPORT_SYMBOL_GPL(nft_validate_register_store); + +int nft_parse_register_store(const struct nft_ctx *ctx, + const struct nlattr *attr, u8 *dreg, + const struct nft_data *data, + enum nft_data_types type, unsigned int len) +{ + int err; + u32 reg; + + reg = nft_parse_register(attr); + err = nft_validate_register_store(ctx, reg, data, type, len); + if (err < 0) + return err; + + *dreg = reg; + return 0; +} +EXPORT_SYMBOL_GPL(nft_parse_register_store); static const struct nla_policy nft_verdict_policy[NFTA_VERDICT_MAX + 1] = { [NFTA_VERDICT_CODE] = { .type = NLA_U32 }, diff --git a/net/netfilter/nft_bitwise.c b/net/netfilter/nft_bitwise.c index 850c6b5713b4..ccab2e66d754 100644 --- a/net/netfilter/nft_bitwise.c +++ b/net/netfilter/nft_bitwise.c @@ -17,7 +17,7 @@ struct nft_bitwise { u8 sreg; - enum nft_registers dreg:8; + u8 dreg; u8 len; struct nft_data mask; struct nft_data xor; @@ -70,9 +70,9 @@ static int nft_bitwise_init(const struct nft_ctx *ctx, if (err < 0) return err; - priv->dreg = nft_parse_register(tb[NFTA_BITWISE_DREG]); - err = nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, priv->len); + err = nft_parse_register_store(ctx, tb[NFTA_BITWISE_DREG], + &priv->dreg, NULL, NFT_DATA_VALUE, + priv->len); if (err < 0) return err; diff --git a/net/netfilter/nft_byteorder.c b/net/netfilter/nft_byteorder.c index 0960563cd5a1..9d5947ab8d4e 100644 --- a/net/netfilter/nft_byteorder.c +++ b/net/netfilter/nft_byteorder.c @@ -17,7 +17,7 @@ struct nft_byteorder { u8 sreg; - enum nft_registers dreg:8; + u8 dreg; enum nft_byteorder_ops op:8; u8 len; u8 size; @@ -142,9 +142,9 @@ static int nft_byteorder_init(const struct nft_ctx *ctx, if (err < 0) return err; - priv->dreg = nft_parse_register(tb[NFTA_BYTEORDER_DREG]); - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, priv->len); + return nft_parse_register_store(ctx, tb[NFTA_BYTEORDER_DREG], + &priv->dreg, NULL, NFT_DATA_VALUE, + priv->len); } static int nft_byteorder_dump(struct sk_buff *skb, const struct nft_expr *expr) diff --git a/net/netfilter/nft_ct.c b/net/netfilter/nft_ct.c index edc6b8ae0648..7e269f7378cc 100644 --- a/net/netfilter/nft_ct.c +++ b/net/netfilter/nft_ct.c @@ -27,7 +27,7 @@ struct nft_ct { enum nft_ct_keys key:8; enum ip_conntrack_dir dir:8; union { - enum nft_registers dreg:8; + u8 dreg; u8 sreg; }; }; @@ -498,9 +498,8 @@ static int nft_ct_get_init(const struct nft_ctx *ctx, } } - priv->dreg = nft_parse_register(tb[NFTA_CT_DREG]); - err = nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, len); + err = nft_parse_register_store(ctx, tb[NFTA_CT_DREG], &priv->dreg, NULL, + NFT_DATA_VALUE, len); if (err < 0) return err; diff --git a/net/netfilter/nft_exthdr.c b/net/netfilter/nft_exthdr.c index f2b36b9c2b53..670dd146fb2b 100644 --- a/net/netfilter/nft_exthdr.c +++ b/net/netfilter/nft_exthdr.c @@ -19,7 +19,7 @@ struct nft_exthdr { u8 offset; u8 len; u8 op; - enum nft_registers dreg:8; + u8 dreg; u8 sreg; u8 flags; }; @@ -353,12 +353,12 @@ static int nft_exthdr_init(const struct nft_ctx *ctx, priv->type = nla_get_u8(tb[NFTA_EXTHDR_TYPE]); priv->offset = offset; priv->len = len; - priv->dreg = nft_parse_register(tb[NFTA_EXTHDR_DREG]); priv->flags = flags; priv->op = op; - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, priv->len); + return nft_parse_register_store(ctx, tb[NFTA_EXTHDR_DREG], + &priv->dreg, NULL, NFT_DATA_VALUE, + priv->len); } static int nft_exthdr_tcp_set_init(const struct nft_ctx *ctx, diff --git a/net/netfilter/nft_fib.c b/net/netfilter/nft_fib.c index cfac0964f48d..d2777aff5943 100644 --- a/net/netfilter/nft_fib.c +++ b/net/netfilter/nft_fib.c @@ -86,7 +86,6 @@ int nft_fib_init(const struct nft_ctx *ctx, const struct nft_expr *expr, return -EINVAL; priv->result = ntohl(nla_get_be32(tb[NFTA_FIB_RESULT])); - priv->dreg = nft_parse_register(tb[NFTA_FIB_DREG]); switch (priv->result) { case NFT_FIB_RESULT_OIF: @@ -106,8 +105,8 @@ int nft_fib_init(const struct nft_ctx *ctx, const struct nft_expr *expr, return -EINVAL; } - err = nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, len); + err = nft_parse_register_store(ctx, tb[NFTA_FIB_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, len); if (err < 0) return err; diff --git a/net/netfilter/nft_hash.c b/net/netfilter/nft_hash.c index 3b01ad0a02df..2ff6c7759494 100644 --- a/net/netfilter/nft_hash.c +++ b/net/netfilter/nft_hash.c @@ -15,7 +15,7 @@ struct nft_jhash { u8 sreg; - enum nft_registers dreg:8; + u8 dreg; u8 len; bool autogen_seed:1; u32 modulus; @@ -38,7 +38,7 @@ static void nft_jhash_eval(const struct nft_expr *expr, } struct nft_symhash { - enum nft_registers dreg:8; + u8 dreg; u32 modulus; u32 offset; }; @@ -83,8 +83,6 @@ static int nft_jhash_init(const struct nft_ctx *ctx, if (tb[NFTA_HASH_OFFSET]) priv->offset = ntohl(nla_get_be32(tb[NFTA_HASH_OFFSET])); - priv->dreg = nft_parse_register(tb[NFTA_HASH_DREG]); - err = nft_parse_u32_check(tb[NFTA_HASH_LEN], U8_MAX, &len); if (err < 0) return err; @@ -111,8 +109,8 @@ static int nft_jhash_init(const struct nft_ctx *ctx, get_random_bytes(&priv->seed, sizeof(priv->seed)); } - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, sizeof(u32)); + return nft_parse_register_store(ctx, tb[NFTA_HASH_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, sizeof(u32)); } static int nft_symhash_init(const struct nft_ctx *ctx, @@ -128,8 +126,6 @@ static int nft_symhash_init(const struct nft_ctx *ctx, if (tb[NFTA_HASH_OFFSET]) priv->offset = ntohl(nla_get_be32(tb[NFTA_HASH_OFFSET])); - priv->dreg = nft_parse_register(tb[NFTA_HASH_DREG]); - priv->modulus = ntohl(nla_get_be32(tb[NFTA_HASH_MODULUS])); if (priv->modulus < 1) return -ERANGE; @@ -137,8 +133,9 @@ static int nft_symhash_init(const struct nft_ctx *ctx, if (priv->offset + priv->modulus - 1 < priv->offset) return -EOVERFLOW; - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, sizeof(u32)); + return nft_parse_register_store(ctx, tb[NFTA_HASH_DREG], + &priv->dreg, NULL, NFT_DATA_VALUE, + sizeof(u32)); } static int nft_jhash_dump(struct sk_buff *skb, diff --git a/net/netfilter/nft_immediate.c b/net/netfilter/nft_immediate.c index 98a8149be094..6a95d532eaec 100644 --- a/net/netfilter/nft_immediate.c +++ b/net/netfilter/nft_immediate.c @@ -48,9 +48,9 @@ static int nft_immediate_init(const struct nft_ctx *ctx, priv->dlen = desc.len; - priv->dreg = nft_parse_register(tb[NFTA_IMMEDIATE_DREG]); - err = nft_validate_register_store(ctx, priv->dreg, &priv->data, - desc.type, desc.len); + err = nft_parse_register_store(ctx, tb[NFTA_IMMEDIATE_DREG], + &priv->dreg, &priv->data, desc.type, + desc.len); if (err < 0) goto err1; diff --git a/net/netfilter/nft_lookup.c b/net/netfilter/nft_lookup.c index 349591dabb36..e0ffd463a132 100644 --- a/net/netfilter/nft_lookup.c +++ b/net/netfilter/nft_lookup.c @@ -18,7 +18,7 @@ struct nft_lookup { struct nft_set *set; u8 sreg; - enum nft_registers dreg:8; + u8 dreg; bool invert; struct nft_set_binding binding; }; @@ -97,9 +97,9 @@ static int nft_lookup_init(const struct nft_ctx *ctx, if (!(set->flags & NFT_SET_MAP)) return -EINVAL; - priv->dreg = nft_parse_register(tb[NFTA_LOOKUP_DREG]); - err = nft_validate_register_store(ctx, priv->dreg, NULL, - set->dtype, set->dlen); + err = nft_parse_register_store(ctx, tb[NFTA_LOOKUP_DREG], + &priv->dreg, NULL, set->dtype, + set->dlen); if (err < 0) return err; } else if (set->flags & NFT_SET_MAP) diff --git a/net/netfilter/nft_meta.c b/net/netfilter/nft_meta.c index 28761430d9ee..ec2798ff822e 100644 --- a/net/netfilter/nft_meta.c +++ b/net/netfilter/nft_meta.c @@ -380,9 +380,8 @@ int nft_meta_get_init(const struct nft_ctx *ctx, return -EOPNOTSUPP; } - priv->dreg = nft_parse_register(tb[NFTA_META_DREG]); - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, len); + return nft_parse_register_store(ctx, tb[NFTA_META_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, len); } EXPORT_SYMBOL_GPL(nft_meta_get_init); diff --git a/net/netfilter/nft_numgen.c b/net/netfilter/nft_numgen.c index 48edb9d5f012..7bbca252e7fc 100644 --- a/net/netfilter/nft_numgen.c +++ b/net/netfilter/nft_numgen.c @@ -16,7 +16,7 @@ static DEFINE_PER_CPU(struct rnd_state, nft_numgen_prandom_state); struct nft_ng_inc { - enum nft_registers dreg:8; + u8 dreg; u32 modulus; atomic_t counter; u32 offset; @@ -66,11 +66,10 @@ static int nft_ng_inc_init(const struct nft_ctx *ctx, if (priv->offset + priv->modulus - 1 < priv->offset) return -EOVERFLOW; - priv->dreg = nft_parse_register(tb[NFTA_NG_DREG]); atomic_set(&priv->counter, priv->modulus - 1); - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, sizeof(u32)); + return nft_parse_register_store(ctx, tb[NFTA_NG_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, sizeof(u32)); } static int nft_ng_dump(struct sk_buff *skb, enum nft_registers dreg, @@ -100,7 +99,7 @@ static int nft_ng_inc_dump(struct sk_buff *skb, const struct nft_expr *expr) } struct nft_ng_random { - enum nft_registers dreg:8; + u8 dreg; u32 modulus; u32 offset; }; @@ -140,10 +139,8 @@ static int nft_ng_random_init(const struct nft_ctx *ctx, prandom_init_once(&nft_numgen_prandom_state); - priv->dreg = nft_parse_register(tb[NFTA_NG_DREG]); - - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, sizeof(u32)); + return nft_parse_register_store(ctx, tb[NFTA_NG_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, sizeof(u32)); } static int nft_ng_random_dump(struct sk_buff *skb, const struct nft_expr *expr) diff --git a/net/netfilter/nft_osf.c b/net/netfilter/nft_osf.c index d966a3aff1d3..b7c2bc01f8a2 100644 --- a/net/netfilter/nft_osf.c +++ b/net/netfilter/nft_osf.c @@ -6,7 +6,7 @@ #include struct nft_osf { - enum nft_registers dreg:8; + u8 dreg; u8 ttl; u32 flags; }; @@ -83,9 +83,9 @@ static int nft_osf_init(const struct nft_ctx *ctx, priv->flags = flags; } - priv->dreg = nft_parse_register(tb[NFTA_OSF_DREG]); - err = nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, NFT_OSF_MAXGENRELEN); + err = nft_parse_register_store(ctx, tb[NFTA_OSF_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, + NFT_OSF_MAXGENRELEN); if (err < 0) return err; diff --git a/net/netfilter/nft_payload.c b/net/netfilter/nft_payload.c index ce670c959a99..54298fcd82f0 100644 --- a/net/netfilter/nft_payload.c +++ b/net/netfilter/nft_payload.c @@ -135,10 +135,10 @@ static int nft_payload_init(const struct nft_ctx *ctx, priv->base = ntohl(nla_get_be32(tb[NFTA_PAYLOAD_BASE])); priv->offset = ntohl(nla_get_be32(tb[NFTA_PAYLOAD_OFFSET])); priv->len = ntohl(nla_get_be32(tb[NFTA_PAYLOAD_LEN])); - priv->dreg = nft_parse_register(tb[NFTA_PAYLOAD_DREG]); - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, priv->len); + return nft_parse_register_store(ctx, tb[NFTA_PAYLOAD_DREG], + &priv->dreg, NULL, NFT_DATA_VALUE, + priv->len); } static int nft_payload_dump(struct sk_buff *skb, const struct nft_expr *expr) diff --git a/net/netfilter/nft_rt.c b/net/netfilter/nft_rt.c index 7cfcb0e2f7ee..bcd01a63e38f 100644 --- a/net/netfilter/nft_rt.c +++ b/net/netfilter/nft_rt.c @@ -15,7 +15,7 @@ struct nft_rt { enum nft_rt_keys key:8; - enum nft_registers dreg:8; + u8 dreg; }; static u16 get_tcpmss(const struct nft_pktinfo *pkt, const struct dst_entry *skbdst) @@ -141,9 +141,8 @@ static int nft_rt_get_init(const struct nft_ctx *ctx, return -EOPNOTSUPP; } - priv->dreg = nft_parse_register(tb[NFTA_RT_DREG]); - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, len); + return nft_parse_register_store(ctx, tb[NFTA_RT_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, len); } static int nft_rt_get_dump(struct sk_buff *skb, diff --git a/net/netfilter/nft_socket.c b/net/netfilter/nft_socket.c index 4026ec38526f..7e4f7063f481 100644 --- a/net/netfilter/nft_socket.c +++ b/net/netfilter/nft_socket.c @@ -10,7 +10,7 @@ struct nft_socket { enum nft_socket_keys key:8; union { - enum nft_registers dreg:8; + u8 dreg; }; }; @@ -119,9 +119,8 @@ static int nft_socket_init(const struct nft_ctx *ctx, return -EOPNOTSUPP; } - priv->dreg = nft_parse_register(tb[NFTA_SOCKET_DREG]); - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, len); + return nft_parse_register_store(ctx, tb[NFTA_SOCKET_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, len); } static int nft_socket_dump(struct sk_buff *skb, diff --git a/net/netfilter/nft_tunnel.c b/net/netfilter/nft_tunnel.c index 4e850c81ad8d..b2070f9f98ff 100644 --- a/net/netfilter/nft_tunnel.c +++ b/net/netfilter/nft_tunnel.c @@ -14,7 +14,7 @@ struct nft_tunnel { enum nft_tunnel_keys key:8; - enum nft_registers dreg:8; + u8 dreg; enum nft_tunnel_mode mode:8; }; @@ -92,8 +92,6 @@ static int nft_tunnel_get_init(const struct nft_ctx *ctx, return -EOPNOTSUPP; } - priv->dreg = nft_parse_register(tb[NFTA_TUNNEL_DREG]); - if (tb[NFTA_TUNNEL_MODE]) { priv->mode = ntohl(nla_get_be32(tb[NFTA_TUNNEL_MODE])); if (priv->mode > NFT_TUNNEL_MODE_MAX) @@ -102,8 +100,8 @@ static int nft_tunnel_get_init(const struct nft_ctx *ctx, priv->mode = NFT_TUNNEL_MODE_NONE; } - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, len); + return nft_parse_register_store(ctx, tb[NFTA_TUNNEL_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, len); } static int nft_tunnel_get_dump(struct sk_buff *skb, diff --git a/net/netfilter/nft_xfrm.c b/net/netfilter/nft_xfrm.c index 06d5cabf1d7c..cbbbc4ecad3a 100644 --- a/net/netfilter/nft_xfrm.c +++ b/net/netfilter/nft_xfrm.c @@ -24,7 +24,7 @@ static const struct nla_policy nft_xfrm_policy[NFTA_XFRM_MAX + 1] = { struct nft_xfrm { enum nft_xfrm_keys key:8; - enum nft_registers dreg:8; + u8 dreg; u8 dir; u8 spnum; }; @@ -86,9 +86,8 @@ static int nft_xfrm_get_init(const struct nft_ctx *ctx, priv->spnum = spnum; - priv->dreg = nft_parse_register(tb[NFTA_XFRM_DREG]); - return nft_validate_register_store(ctx, priv->dreg, NULL, - NFT_DATA_VALUE, len); + return nft_parse_register_store(ctx, tb[NFTA_XFRM_DREG], &priv->dreg, + NULL, NFT_DATA_VALUE, len); } /* Return true if key asks for daddr/saddr and current From cfe1b9719ccedca902d0ea64349f87435fe7904a Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 May 2023 16:44:29 +0200 Subject: [PATCH 381/755] netfilter: nftables: statify nft_parse_register() [ 08a01c11a5bb3de9b0a9c9b2685867e50eda9910 ] This function is not used anymore by any extension, statify it. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- include/net/netfilter/nf_tables.h | 1 - net/netfilter/nf_tables_api.c | 3 +-- 2 files changed, 1 insertion(+), 3 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index 446f70132d82..ba5f97f5c490 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -205,7 +205,6 @@ static inline enum nft_registers nft_type_to_reg(enum nft_data_types type) } int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest); -unsigned int nft_parse_register(const struct nlattr *attr); int nft_dump_register(struct sk_buff *skb, unsigned int attr, unsigned int reg); int nft_parse_register_load(const struct nlattr *attr, u8 *sreg, u32 len); diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 0ccbe8751085..8a0095664e61 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -7393,7 +7393,7 @@ EXPORT_SYMBOL_GPL(nft_parse_u32_check); * Registers used to be 128 bit wide, these register numbers will be * mapped to the corresponding 32 bit register numbers. */ -unsigned int nft_parse_register(const struct nlattr *attr) +static unsigned int nft_parse_register(const struct nlattr *attr) { unsigned int reg; @@ -7405,7 +7405,6 @@ unsigned int nft_parse_register(const struct nlattr *attr) return reg + NFT_REG_SIZE / NFT_REG32_SIZE - NFT_REG32_00; } } -EXPORT_SYMBOL_GPL(nft_parse_register); /** * nft_dump_register - dump a register value to a netlink attribute From eb5b579bd69fc918795ebf62bb836b494d56344b Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 May 2023 16:44:30 +0200 Subject: [PATCH 382/755] netfilter: nf_tables: validate registers coming from userspace. [ 6e1acfa387b9ff82cfc7db8cc3b6959221a95851 ] Bail out in case userspace uses unsupported registers. Fixes: 49499c3e6e18 ("netfilter: nf_tables: switch registers to 32 bit addressing") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 31 +++++++++++++++++-------------- 1 file changed, 17 insertions(+), 14 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 8a0095664e61..a90bf82ea143 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -7384,26 +7384,23 @@ int nft_parse_u32_check(const struct nlattr *attr, int max, u32 *dest) } EXPORT_SYMBOL_GPL(nft_parse_u32_check); -/** - * nft_parse_register - parse a register value from a netlink attribute - * - * @attr: netlink attribute - * - * Parse and translate a register value from a netlink attribute. - * Registers used to be 128 bit wide, these register numbers will be - * mapped to the corresponding 32 bit register numbers. - */ -static unsigned int nft_parse_register(const struct nlattr *attr) +static int nft_parse_register(const struct nlattr *attr, u32 *preg) { unsigned int reg; reg = ntohl(nla_get_be32(attr)); switch (reg) { case NFT_REG_VERDICT...NFT_REG_4: - return reg * NFT_REG_SIZE / NFT_REG32_SIZE; + *preg = reg * NFT_REG_SIZE / NFT_REG32_SIZE; + break; + case NFT_REG32_00...NFT_REG32_15: + *preg = reg + NFT_REG_SIZE / NFT_REG32_SIZE - NFT_REG32_00; + break; default: - return reg + NFT_REG_SIZE / NFT_REG32_SIZE - NFT_REG32_00; + return -ERANGE; } + + return 0; } /** @@ -7454,7 +7451,10 @@ int nft_parse_register_load(const struct nlattr *attr, u8 *sreg, u32 len) u32 reg; int err; - reg = nft_parse_register(attr); + err = nft_parse_register(attr, ®); + if (err < 0) + return err; + err = nft_validate_register_load(reg, len); if (err < 0) return err; @@ -7523,7 +7523,10 @@ int nft_parse_register_store(const struct nft_ctx *ctx, int err; u32 reg; - reg = nft_parse_register(attr); + err = nft_parse_register(attr, ®); + if (err < 0) + return err; + err = nft_validate_register_store(ctx, reg, data, type, len); if (err < 0) return err; From 28fe10236a64c544cd26da6eebec42f21bc15430 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 May 2023 16:44:31 +0200 Subject: [PATCH 383/755] netfilter: nf_tables: add nft_setelem_parse_key() [ 20a1452c35425b2cef76f21f8395ef069dfddfa9 ] Add helper function to parse the set element key netlink attribute. v4: No changes v3: New patch [sbrivio: refactor error paths and labels; use NFT_DATA_VALUE_MAXLEN instead of sizeof(*key) in helper, value can be longer than that; rebase] Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 91 +++++++++++++++++------------------ 1 file changed, 45 insertions(+), 46 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index a90bf82ea143..13a8a78b8ee8 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4292,11 +4292,28 @@ static int nft_setelem_parse_flags(const struct nft_set *set, return 0; } +static int nft_setelem_parse_key(struct nft_ctx *ctx, struct nft_set *set, + struct nft_data *key, struct nlattr *attr) +{ + struct nft_data_desc desc; + int err; + + err = nft_data_init(ctx, key, NFT_DATA_VALUE_MAXLEN, &desc, attr); + if (err < 0) + return err; + + if (desc.type != NFT_DATA_VALUE || desc.len != set->klen) { + nft_data_release(key, desc.type); + return -EINVAL; + } + + return 0; +} + static int nft_get_set_elem(struct nft_ctx *ctx, struct nft_set *set, const struct nlattr *attr) { struct nlattr *nla[NFTA_SET_ELEM_MAX + 1]; - struct nft_data_desc desc; struct nft_set_elem elem; struct sk_buff *skb; uint32_t flags = 0; @@ -4315,17 +4332,11 @@ static int nft_get_set_elem(struct nft_ctx *ctx, struct nft_set *set, if (err < 0) return err; - err = nft_data_init(ctx, &elem.key.val, sizeof(elem.key), &desc, - nla[NFTA_SET_ELEM_KEY]); + err = nft_setelem_parse_key(ctx, set, &elem.key.val, + nla[NFTA_SET_ELEM_KEY]); if (err < 0) return err; - err = -EINVAL; - if (desc.type != NFT_DATA_VALUE || desc.len != set->klen) { - nft_data_release(&elem.key.val, desc.type); - return err; - } - priv = set->ops->get(ctx->net, set, &elem, flags); if (IS_ERR(priv)) return PTR_ERR(priv); @@ -4518,13 +4529,13 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, { struct nlattr *nla[NFTA_SET_ELEM_MAX + 1]; u8 genmask = nft_genmask_next(ctx->net); - struct nft_data_desc d1, d2; struct nft_set_ext_tmpl tmpl; struct nft_set_ext *ext, *ext2; struct nft_set_elem elem; struct nft_set_binding *binding; struct nft_object *obj = NULL; struct nft_userdata *udata; + struct nft_data_desc desc; struct nft_data data; enum nft_registers dreg; struct nft_trans *trans; @@ -4590,15 +4601,12 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, return err; } - err = nft_data_init(ctx, &elem.key.val, sizeof(elem.key), &d1, - nla[NFTA_SET_ELEM_KEY]); + err = nft_setelem_parse_key(ctx, set, &elem.key.val, + nla[NFTA_SET_ELEM_KEY]); if (err < 0) goto err1; - err = -EINVAL; - if (d1.type != NFT_DATA_VALUE || d1.len != set->klen) - goto err2; - nft_set_ext_add_length(&tmpl, NFT_SET_EXT_KEY, d1.len); + nft_set_ext_add_length(&tmpl, NFT_SET_EXT_KEY, set->klen); if (timeout > 0) { nft_set_ext_add(&tmpl, NFT_SET_EXT_EXPIRATION); if (timeout != set->timeout) @@ -4621,13 +4629,13 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, } if (nla[NFTA_SET_ELEM_DATA] != NULL) { - err = nft_data_init(ctx, &data, sizeof(data), &d2, + err = nft_data_init(ctx, &data, sizeof(data), &desc, nla[NFTA_SET_ELEM_DATA]); if (err < 0) goto err2; err = -EINVAL; - if (set->dtype != NFT_DATA_VERDICT && d2.len != set->dlen) + if (set->dtype != NFT_DATA_VERDICT && desc.len != set->dlen) goto err3; dreg = nft_type_to_reg(set->dtype); @@ -4644,18 +4652,18 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, err = nft_validate_register_store(&bind_ctx, dreg, &data, - d2.type, d2.len); + desc.type, desc.len); if (err < 0) goto err3; - if (d2.type == NFT_DATA_VERDICT && + if (desc.type == NFT_DATA_VERDICT && (data.verdict.code == NFT_GOTO || data.verdict.code == NFT_JUMP)) nft_validate_state_update(ctx->net, NFT_VALIDATE_NEED); } - nft_set_ext_add_length(&tmpl, NFT_SET_EXT_DATA, d2.len); + nft_set_ext_add_length(&tmpl, NFT_SET_EXT_DATA, desc.len); } /* The full maximum length of userdata can exceed the maximum @@ -4738,9 +4746,9 @@ err4: kfree(elem.priv); err3: if (nla[NFTA_SET_ELEM_DATA] != NULL) - nft_data_release(&data, d2.type); + nft_data_release(&data, desc.type); err2: - nft_data_release(&elem.key.val, d1.type); + nft_data_release(&elem.key.val, NFT_DATA_VALUE); err1: return err; } @@ -4836,7 +4844,6 @@ static int nft_del_setelem(struct nft_ctx *ctx, struct nft_set *set, { struct nlattr *nla[NFTA_SET_ELEM_MAX + 1]; struct nft_set_ext_tmpl tmpl; - struct nft_data_desc desc; struct nft_set_elem elem; struct nft_set_ext *ext; struct nft_trans *trans; @@ -4847,11 +4854,10 @@ static int nft_del_setelem(struct nft_ctx *ctx, struct nft_set *set, err = nla_parse_nested_deprecated(nla, NFTA_SET_ELEM_MAX, attr, nft_set_elem_policy, NULL); if (err < 0) - goto err1; + return err; - err = -EINVAL; if (nla[NFTA_SET_ELEM_KEY] == NULL) - goto err1; + return -EINVAL; nft_set_ext_prepare(&tmpl); @@ -4861,37 +4867,31 @@ static int nft_del_setelem(struct nft_ctx *ctx, struct nft_set *set, if (flags != 0) nft_set_ext_add(&tmpl, NFT_SET_EXT_FLAGS); - err = nft_data_init(ctx, &elem.key.val, sizeof(elem.key), &desc, - nla[NFTA_SET_ELEM_KEY]); + err = nft_setelem_parse_key(ctx, set, &elem.key.val, + nla[NFTA_SET_ELEM_KEY]); if (err < 0) - goto err1; + return err; - err = -EINVAL; - if (desc.type != NFT_DATA_VALUE || desc.len != set->klen) - goto err2; - - nft_set_ext_add_length(&tmpl, NFT_SET_EXT_KEY, desc.len); + nft_set_ext_add_length(&tmpl, NFT_SET_EXT_KEY, set->klen); err = -ENOMEM; elem.priv = nft_set_elem_init(set, &tmpl, elem.key.val.data, NULL, 0, 0, GFP_KERNEL); if (elem.priv == NULL) - goto err2; + goto fail_elem; ext = nft_set_elem_ext(set, elem.priv); if (flags) *nft_set_ext_flags(ext) = flags; trans = nft_trans_elem_alloc(ctx, NFT_MSG_DELSETELEM, set); - if (trans == NULL) { - err = -ENOMEM; - goto err3; - } + if (trans == NULL) + goto fail_trans; priv = set->ops->deactivate(ctx->net, set, &elem); if (priv == NULL) { err = -ENOENT; - goto err4; + goto fail_ops; } kfree(elem.priv); elem.priv = priv; @@ -4902,13 +4902,12 @@ static int nft_del_setelem(struct nft_ctx *ctx, struct nft_set *set, list_add_tail(&trans->list, &ctx->net->nft.commit_list); return 0; -err4: +fail_ops: kfree(trans); -err3: +fail_trans: kfree(elem.priv); -err2: - nft_data_release(&elem.key.val, desc.type); -err1: +fail_elem: + nft_data_release(&elem.key.val, NFT_DATA_VALUE); return err; } From e832e4bae556bfc7ed5ecbb87683bdca2cd5ce9c Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 May 2023 16:44:32 +0200 Subject: [PATCH 384/755] netfilter: nf_tables: allow up to 64 bytes in the set element data area [ fdb9c405e35bdc6e305b9b4e20ebc141ed14fc81 ] So far, the set elements could store up to 128-bits in the data area. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- include/net/netfilter/nf_tables.h | 4 +++ net/netfilter/nf_tables_api.c | 41 +++++++++++++++++++++---------- 2 files changed, 32 insertions(+), 13 deletions(-) diff --git a/include/net/netfilter/nf_tables.h b/include/net/netfilter/nf_tables.h index ba5f97f5c490..a8cc2750990f 100644 --- a/include/net/netfilter/nf_tables.h +++ b/include/net/netfilter/nf_tables.h @@ -239,6 +239,10 @@ struct nft_set_elem { u32 buf[NFT_DATA_VALUE_MAXLEN / sizeof(u32)]; struct nft_data val; } key; + union { + u32 buf[NFT_DATA_VALUE_MAXLEN / sizeof(u32)]; + struct nft_data val; + } data; void *priv; }; diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 13a8a78b8ee8..8648b3ced622 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4310,6 +4310,25 @@ static int nft_setelem_parse_key(struct nft_ctx *ctx, struct nft_set *set, return 0; } +static int nft_setelem_parse_data(struct nft_ctx *ctx, struct nft_set *set, + struct nft_data_desc *desc, + struct nft_data *data, + struct nlattr *attr) +{ + int err; + + err = nft_data_init(ctx, data, NFT_DATA_VALUE_MAXLEN, desc, attr); + if (err < 0) + return err; + + if (desc->type != NFT_DATA_VERDICT && desc->len != set->dlen) { + nft_data_release(data, desc->type); + return -EINVAL; + } + + return 0; +} + static int nft_get_set_elem(struct nft_ctx *ctx, struct nft_set *set, const struct nlattr *attr) { @@ -4536,7 +4555,6 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, struct nft_object *obj = NULL; struct nft_userdata *udata; struct nft_data_desc desc; - struct nft_data data; enum nft_registers dreg; struct nft_trans *trans; u32 flags = 0; @@ -4629,15 +4647,11 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, } if (nla[NFTA_SET_ELEM_DATA] != NULL) { - err = nft_data_init(ctx, &data, sizeof(data), &desc, - nla[NFTA_SET_ELEM_DATA]); + err = nft_setelem_parse_data(ctx, set, &desc, &elem.data.val, + nla[NFTA_SET_ELEM_DATA]); if (err < 0) goto err2; - err = -EINVAL; - if (set->dtype != NFT_DATA_VERDICT && desc.len != set->dlen) - goto err3; - dreg = nft_type_to_reg(set->dtype); list_for_each_entry(binding, &set->bindings, list) { struct nft_ctx bind_ctx = { @@ -4651,14 +4665,14 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, continue; err = nft_validate_register_store(&bind_ctx, dreg, - &data, + &elem.data.val, desc.type, desc.len); if (err < 0) goto err3; if (desc.type == NFT_DATA_VERDICT && - (data.verdict.code == NFT_GOTO || - data.verdict.code == NFT_JUMP)) + (elem.data.val.verdict.code == NFT_GOTO || + elem.data.val.verdict.code == NFT_JUMP)) nft_validate_state_update(ctx->net, NFT_VALIDATE_NEED); } @@ -4679,8 +4693,9 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, } err = -ENOMEM; - elem.priv = nft_set_elem_init(set, &tmpl, elem.key.val.data, data.data, - timeout, expiration, GFP_KERNEL); + elem.priv = nft_set_elem_init(set, &tmpl, elem.key.val.data, + elem.data.val.data, timeout, expiration, + GFP_KERNEL); if (elem.priv == NULL) goto err3; @@ -4746,7 +4761,7 @@ err4: kfree(elem.priv); err3: if (nla[NFTA_SET_ELEM_DATA] != NULL) - nft_data_release(&data, desc.type); + nft_data_release(&elem.data.val, desc.type); err2: nft_data_release(&elem.key.val, NFT_DATA_VALUE); err1: From 05b4105e6852b584dd115d0a1f0fe96bde9c58c5 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 May 2023 16:44:33 +0200 Subject: [PATCH 385/755] netfilter: nf_tables: stricter validation of element data [ 7e6bc1f6cabcd30aba0b11219d8e01b952eacbb6 ] Make sure element data type and length do not mismatch the one specified by the set declaration. Fixes: 7d7402642eaf ("netfilter: nf_tables: variable sized set element keys / data") Reported-by: Hugues ANGUELKOV Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 8648b3ced622..c82c4635c0a9 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4315,13 +4315,20 @@ static int nft_setelem_parse_data(struct nft_ctx *ctx, struct nft_set *set, struct nft_data *data, struct nlattr *attr) { + u32 dtype; int err; err = nft_data_init(ctx, data, NFT_DATA_VALUE_MAXLEN, desc, attr); if (err < 0) return err; - if (desc->type != NFT_DATA_VERDICT && desc->len != set->dlen) { + if (set->dtype == NFT_DATA_VERDICT) + dtype = NFT_DATA_VERDICT; + else + dtype = NFT_DATA_VALUE; + + if (dtype != desc->type || + set->dlen != desc->len) { nft_data_release(data, desc->type); return -EINVAL; } From 6236af6936dd1261ffe3e7aa3b6f55daf0301c4c Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 May 2023 16:44:34 +0200 Subject: [PATCH 386/755] netfilter: nf_tables: validate NFTA_SET_ELEM_OBJREF based on NFT_SET_OBJECT flag [ 5a2f3dc31811e93be15522d9eb13ed61460b76c8 ] If the NFTA_SET_ELEM_OBJREF netlink attribute is present and NFT_SET_OBJECT flag is set on, report EINVAL. Move existing sanity check earlier to validate that NFT_SET_OBJECT requires NFTA_SET_ELEM_OBJREF. Fixes: 8aeff920dcc9 ("netfilter: nf_tables: add stateful object reference to set elements") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index c82c4635c0a9..e4eef4947cc7 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4595,6 +4595,15 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, return -EINVAL; } + if (set->flags & NFT_SET_OBJECT) { + if (!nla[NFTA_SET_ELEM_OBJREF] && + !(flags & NFT_SET_ELEM_INTERVAL_END)) + return -EINVAL; + } else { + if (nla[NFTA_SET_ELEM_OBJREF]) + return -EINVAL; + } + if ((flags & NFT_SET_ELEM_INTERVAL_END) && (nla[NFTA_SET_ELEM_DATA] || nla[NFTA_SET_ELEM_OBJREF] || @@ -4639,10 +4648,6 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, } if (nla[NFTA_SET_ELEM_OBJREF] != NULL) { - if (!(set->flags & NFT_SET_OBJECT)) { - err = -EINVAL; - goto err2; - } obj = nft_obj_lookup(ctx->net, ctx->table, nla[NFTA_SET_ELEM_OBJREF], set->objtype, genmask); From e0c1b35239d9bb98c3a356b930ca8f8eecef07ab Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Tue, 16 May 2023 16:44:35 +0200 Subject: [PATCH 387/755] netfilter: nf_tables: hold mutex on netns pre_exit path [ 3923b1e4406680d57da7e873da77b1683035d83f ] clean_net() runs in workqueue while walking over the lists, grab mutex. Fixes: 767d1216bff8 ("netfilter: nftables: fix possible UAF over chains from packet path in netns") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index e4eef4947cc7..909076ef157e 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -7866,7 +7866,9 @@ static int __net_init nf_tables_init_net(struct net *net) static void __net_exit nf_tables_pre_exit_net(struct net *net) { + mutex_lock(&net->nft.commit_mutex); __nft_release_hooks(net); + mutex_unlock(&net->nft.commit_mutex); } static void __net_exit nf_tables_exit_net(struct net *net) From b5185f1b11c7f9fa101467f64532ce153862c10f Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Fri, 15 Jul 2022 16:05:19 -0700 Subject: [PATCH 388/755] HID: wacom: Force pen out of prox if no events have been received in a while commit 94b179052f95c294d83e9c9c34f7833cf3cd4305 upstream. Prox-out events may not be reliably sent by some AES firmware. This can cause problems for users, particularly due to arbitration logic disabling touch input while the pen is in prox. This commit adds a timer which is reset every time a new prox event is received. When the timer expires we check to see if the pen is still in prox and force it out if necessary. This is patterend off of the same solution used by 'hid-letsketch' driver which has a similar problem. Link: https://github.com/linuxwacom/input-wacom/issues/310 Signed-off-by: Jason Gerecke Signed-off-by: Jiri Kosina Cc: Ping Cheng Signed-off-by: Greg Kroah-Hartman --- drivers/hid/wacom.h | 3 +++ drivers/hid/wacom_sys.c | 2 ++ drivers/hid/wacom_wac.c | 39 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 44 insertions(+) diff --git a/drivers/hid/wacom.h b/drivers/hid/wacom.h index 203d27d198b8..3f8b24a57014 100644 --- a/drivers/hid/wacom.h +++ b/drivers/hid/wacom.h @@ -91,6 +91,7 @@ #include #include #include +#include #include /* @@ -167,6 +168,7 @@ struct wacom { struct delayed_work init_work; struct wacom_remote *remote; struct work_struct mode_change_work; + struct timer_list idleprox_timer; bool generic_has_leds; struct wacom_leds { struct wacom_group_leds *groups; @@ -239,4 +241,5 @@ struct wacom_led *wacom_led_find(struct wacom *wacom, unsigned int group, struct wacom_led *wacom_led_next(struct wacom *wacom, struct wacom_led *cur); int wacom_equivalent_usage(int usage); int wacom_initialize_leds(struct wacom *wacom); +void wacom_idleprox_timeout(struct timer_list *list); #endif diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index b42785fdf7ed..a93070f5b214 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -2781,6 +2781,7 @@ static int wacom_probe(struct hid_device *hdev, INIT_WORK(&wacom->battery_work, wacom_battery_work); INIT_WORK(&wacom->remote_work, wacom_remote_work); INIT_WORK(&wacom->mode_change_work, wacom_mode_change_work); + timer_setup(&wacom->idleprox_timer, &wacom_idleprox_timeout, TIMER_DEFERRABLE); /* ask for the report descriptor to be loaded by HID */ error = hid_parse(hdev); @@ -2825,6 +2826,7 @@ static void wacom_remove(struct hid_device *hdev) cancel_work_sync(&wacom->battery_work); cancel_work_sync(&wacom->remote_work); cancel_work_sync(&wacom->mode_change_work); + del_timer_sync(&wacom->idleprox_timer); if (hdev->bus == BUS_BLUETOOTH) device_remove_file(&hdev->dev, &dev_attr_speed); diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 819e6d2ca2f3..5284348e592d 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -11,6 +11,7 @@ #include "wacom_wac.h" #include "wacom.h" #include +#include /* resolution for penabled devices */ #define WACOM_PL_RES 20 @@ -41,6 +42,43 @@ static int wacom_numbered_button_to_key(int n); static void wacom_update_led(struct wacom *wacom, int button_count, int mask, int group); + +static void wacom_force_proxout(struct wacom_wac *wacom_wac) +{ + struct input_dev *input = wacom_wac->pen_input; + + wacom_wac->shared->stylus_in_proximity = 0; + + input_report_key(input, BTN_TOUCH, 0); + input_report_key(input, BTN_STYLUS, 0); + input_report_key(input, BTN_STYLUS2, 0); + input_report_key(input, BTN_STYLUS3, 0); + input_report_key(input, wacom_wac->tool[0], 0); + if (wacom_wac->serial[0]) { + input_report_abs(input, ABS_MISC, 0); + } + input_report_abs(input, ABS_PRESSURE, 0); + + wacom_wac->tool[0] = 0; + wacom_wac->id[0] = 0; + wacom_wac->serial[0] = 0; + + input_sync(input); +} + +void wacom_idleprox_timeout(struct timer_list *list) +{ + struct wacom *wacom = from_timer(wacom, list, idleprox_timer); + struct wacom_wac *wacom_wac = &wacom->wacom_wac; + + if (!wacom_wac->hid_data.sense_state) { + return; + } + + hid_warn(wacom->hdev, "%s: tool appears to be hung in-prox. forcing it out.\n", __func__); + wacom_force_proxout(wacom_wac); +} + /* * Percent of battery capacity for Graphire. * 8th value means AC online and show 100% capacity. @@ -2328,6 +2366,7 @@ static void wacom_wac_pen_event(struct hid_device *hdev, struct hid_field *field value = field->logical_maximum - value; break; case HID_DG_INRANGE: + mod_timer(&wacom->idleprox_timer, jiffies + msecs_to_jiffies(100)); wacom_wac->hid_data.inrange_state = value; if (!(features->quirks & WACOM_QUIRK_SENSE)) wacom_wac->hid_data.sense_state = value; From 2a12339ce34fd15032f53446ea79edbb92048aef Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Fri, 26 Aug 2022 14:34:02 -0700 Subject: [PATCH 389/755] HID: wacom: Add new Intuos Pro Small (PTH-460) device IDs commit 0627f3df95e1609693f89e7ceb4156ac5db6e358 upstream. Add the new PIDs to wacom_wac.c to support the new model in the Intuos Pro series. Signed-off-by: Ping Cheng Tested-by: Aaron Armstrong Skomra Signed-off-by: Jiri Kosina Cc: Ping Cheng Signed-off-by: Greg Kroah-Hartman --- drivers/hid/wacom_wac.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 5284348e592d..6fbdffaadb9b 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -4840,6 +4840,10 @@ static const struct wacom_features wacom_features_0x3c6 = static const struct wacom_features wacom_features_0x3c8 = { "Wacom Intuos BT M", 21600, 13500, 4095, 63, INTUOSHT3_BT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4 }; +static const struct wacom_features wacom_features_0x3dd = + { "Wacom Intuos Pro S", 31920, 19950, 8191, 63, + INTUOSP2S_BT, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, + .touch_max = 10 }; static const struct wacom_features wacom_features_HID_ANY_ID = { "Wacom HID", .type = HID_GENERIC, .oVid = HID_ANY_ID, .oPid = HID_ANY_ID }; @@ -5019,6 +5023,7 @@ const struct hid_device_id wacom_ids[] = { { BT_DEVICE_WACOM(0x393) }, { BT_DEVICE_WACOM(0x3c6) }, { BT_DEVICE_WACOM(0x3c8) }, + { BT_DEVICE_WACOM(0x3dd) }, { USB_DEVICE_WACOM(0x4001) }, { USB_DEVICE_WACOM(0x4004) }, { USB_DEVICE_WACOM(0x5000) }, From 7e15602c507395eff31282e2bf6e2269b2e060a0 Mon Sep 17 00:00:00 2001 From: Ping Cheng Date: Wed, 28 Sep 2022 13:49:29 -0700 Subject: [PATCH 390/755] HID: wacom: add three styli to wacom_intuos_get_tool_type commit bfdc750c4cb2f3461b9b00a2755e2145ac195c9a upstream. We forgot to add the 3D pen ID a year ago. There are two new pro pen IDs to be added. Signed-off-by: Ping Cheng Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman --- drivers/hid/wacom_wac.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 6fbdffaadb9b..099f7cccc3a7 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -713,11 +713,14 @@ static int wacom_intuos_get_tool_type(int tool_id) case 0x802: /* Intuos4/5 13HD/24HD General Pen */ case 0x8e2: /* IntuosHT2 pen */ case 0x022: + case 0x200: /* Pro Pen 3 */ + case 0x04200: /* Pro Pen 3 */ case 0x10842: /* MobileStudio Pro Pro Pen slim */ case 0x14802: /* Intuos4/5 13HD/24HD Classic Pen */ case 0x16802: /* Cintiq 13HD Pro Pen */ case 0x18802: /* DTH2242 Pen */ case 0x10802: /* Intuos4/5 13HD/24HD General Pen */ + case 0x80842: /* Intuos Pro and Cintiq Pro 3D Pen */ tool_type = BTN_TOOL_PEN; break; From c8489e0fab18d4d31bfbea81bdcd52c3f094f2b4 Mon Sep 17 00:00:00 2001 From: Vadim Pasternak Date: Tue, 14 Jul 2020 15:01:53 +0300 Subject: [PATCH 391/755] lib/string_helpers: Introduce string_upper() and string_lower() helpers [ Upstream commit 58eeba0bdb52afe5c18ce2a760ca9fe2901943e9 ] Provide the helpers for string conversions to upper and lower cases. Signed-off-by: Vadim Pasternak Signed-off-by: Andy Shevchenko Stable-dep-of: 3c0f4f09c063 ("usb: gadget: u_ether: Fix host MAC address case") Signed-off-by: Sasha Levin --- include/linux/string_helpers.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/include/linux/string_helpers.h b/include/linux/string_helpers.h index c28955132234..86f150c2a6b6 100644 --- a/include/linux/string_helpers.h +++ b/include/linux/string_helpers.h @@ -2,6 +2,7 @@ #ifndef _LINUX_STRING_HELPERS_H_ #define _LINUX_STRING_HELPERS_H_ +#include #include struct file; @@ -75,6 +76,20 @@ static inline int string_escape_str_any_np(const char *src, char *dst, return string_escape_str(src, dst, sz, ESCAPE_ANY_NP, only); } +static inline void string_upper(char *dst, const char *src) +{ + do { + *dst++ = toupper(*src); + } while (*src++); +} + +static inline void string_lower(char *dst, const char *src) +{ + do { + *dst++ = tolower(*src); + } while (*src++); +} + char *kstrdup_quotable(const char *src, gfp_t gfp); char *kstrdup_quotable_cmdline(struct task_struct *task, gfp_t gfp); char *kstrdup_quotable_file(struct file *file, gfp_t gfp); From 939cafcdf7de6d65fba4043be5e8bba0a283fe95 Mon Sep 17 00:00:00 2001 From: Jon Hunter Date: Thu, 9 Feb 2023 12:53:18 +0000 Subject: [PATCH 392/755] usb: gadget: u_ether: Convert prints to device prints [ Upstream commit 938fc645317632d79c048608689683b5437496ea ] The USB ethernet gadget driver implements its own print macros which call printk. Device drivers should use the device prints that print the device name. Fortunately, the same macro names are defined in the header file 'linux/usb/composite.h' and these use the device prints. Therefore, remove the local definitions in the USB ethernet gadget driver and use those in 'linux/usb/composite.h'. The only difference is that now the device name is printed instead of the ethernet interface name. Tested using ethernet gadget on Jetson AGX Orin. Signed-off-by: Jon Hunter Tested-by: Jon Hunter Link: https://lore.kernel.org/r/20230209125319.18589-1-jonathanh@nvidia.com Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 3c0f4f09c063 ("usb: gadget: u_ether: Fix host MAC address case") Signed-off-by: Sasha Levin --- drivers/usb/gadget/function/u_ether.c | 36 +-------------------------- 1 file changed, 1 insertion(+), 35 deletions(-) diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 3f053b11e2ce..d9f9c7a678d8 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -17,6 +17,7 @@ #include #include #include +#include #include "u_ether.h" @@ -102,41 +103,6 @@ static inline int qlen(struct usb_gadget *gadget, unsigned qmult) /*-------------------------------------------------------------------------*/ -/* REVISIT there must be a better way than having two sets - * of debug calls ... - */ - -#undef DBG -#undef VDBG -#undef ERROR -#undef INFO - -#define xprintk(d, level, fmt, args...) \ - printk(level "%s: " fmt , (d)->net->name , ## args) - -#ifdef DEBUG -#undef DEBUG -#define DBG(dev, fmt, args...) \ - xprintk(dev , KERN_DEBUG , fmt , ## args) -#else -#define DBG(dev, fmt, args...) \ - do { } while (0) -#endif /* DEBUG */ - -#ifdef VERBOSE_DEBUG -#define VDBG DBG -#else -#define VDBG(dev, fmt, args...) \ - do { } while (0) -#endif /* DEBUG */ - -#define ERROR(dev, fmt, args...) \ - xprintk(dev , KERN_ERR , fmt , ## args) -#define INFO(dev, fmt, args...) \ - xprintk(dev , KERN_INFO , fmt , ## args) - -/*-------------------------------------------------------------------------*/ - /* NETWORK DRIVER HOOKUP (to the layer above this driver) */ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p) From e9399d4ea5ee9a7589ad5fa9889bdf8a2f9cc925 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Konrad=20Gr=C3=A4fe?= Date: Fri, 5 May 2023 16:36:40 +0200 Subject: [PATCH 393/755] usb: gadget: u_ether: Fix host MAC address case MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 3c0f4f09c063e143822393d99cb2b19a85451c07 ] The CDC-ECM specification [1] requires to send the host MAC address as an uppercase hexadecimal string in chapter "5.4 Ethernet Networking Functional Descriptor": The Unicode character is chosen from the set of values 30h through 39h and 41h through 46h (0-9 and A-F). However, snprintf(.., "%pm", ..) generates a lowercase MAC address string. While most host drivers are tolerant to this, UsbNcm.sys on Windows 10 is not. Instead it uses a different MAC address with all bytes set to zero including and after the first byte containing a lowercase letter. On Windows 11 Microsoft fixed it, but apparently they did not backport the fix. This change fixes the issue by upper-casing the MAC to comply with the specification. [1]: https://www.usb.org/document-library/class-definitions-communication-devices-12, file ECM120.pdf Fixes: bcd4a1c40bee ("usb: gadget: u_ether: construct with default values and add setters/getters") Cc: stable@vger.kernel.org Signed-off-by: Konrad Gräfe Link: https://lore.kernel.org/r/20230505143640.443014-1-k.graefe@gateware.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/usb/gadget/function/u_ether.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index d9f9c7a678d8..af3cb3bfdc29 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include "u_ether.h" @@ -940,6 +941,8 @@ int gether_get_host_addr_cdc(struct net_device *net, char *host_addr, int len) dev = netdev_priv(net); snprintf(host_addr, len, "%pm", dev->host_mac); + string_upper(host_addr, host_addr); + return strlen(host_addr); } EXPORT_SYMBOL_GPL(gether_get_host_addr_cdc); From 74e644795d37a2eff40dbb049e6c72a067a3b4e1 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Tue, 18 Aug 2020 10:56:55 +0200 Subject: [PATCH 394/755] vc_screen: rewrite vcs_size to accept vc, not inode [ Upstream commit 71d4abfab322e827a75304431fe0fad3c805cb80 ] It is weird to fetch the information from the inode over and over. Read and write already have the needed information, so rewrite vcs_size to accept a vc, attr and unicode and adapt vcs_lseek to that. Also make sure all sites check the return value of vcs_size for errors. And document it using kernel-doc. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20200818085706.12163-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 8fb9ea65c9d1 ("vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF") Signed-off-by: Sasha Levin --- drivers/tty/vt/vc_screen.c | 46 ++++++++++++++++++++++++-------------- 1 file changed, 29 insertions(+), 17 deletions(-) diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c index 90de3331e4a5..48d74269f1d5 100644 --- a/drivers/tty/vt/vc_screen.c +++ b/drivers/tty/vt/vc_screen.c @@ -200,39 +200,47 @@ vcs_vc(struct inode *inode, int *viewed) return vc_cons[currcons].d; } -/* - * Returns size for VC carried by inode. +/** + * vcs_size -- return size for a VC in @vc + * @vc: which VC + * @attr: does it use attributes? + * @unicode: is it unicode? + * * Must be called with console_lock. */ -static int -vcs_size(struct inode *inode) +static int vcs_size(const struct vc_data *vc, bool attr, bool unicode) { int size; - struct vc_data *vc; WARN_CONSOLE_UNLOCKED(); - vc = vcs_vc(inode, NULL); - if (!vc) - return -ENXIO; - size = vc->vc_rows * vc->vc_cols; - if (use_attributes(inode)) { - if (use_unicode(inode)) + if (attr) { + if (unicode) return -EOPNOTSUPP; - size = 2*size + HEADER_SIZE; - } else if (use_unicode(inode)) + + size = 2 * size + HEADER_SIZE; + } else if (unicode) size *= 4; + return size; } static loff_t vcs_lseek(struct file *file, loff_t offset, int orig) { + struct inode *inode = file_inode(file); + struct vc_data *vc; int size; console_lock(); - size = vcs_size(file_inode(file)); + vc = vcs_vc(inode, NULL); + if (!vc) { + console_unlock(); + return -ENXIO; + } + + size = vcs_size(vc, use_attributes(inode), use_unicode(inode)); console_unlock(); if (size < 0) return size; @@ -294,7 +302,7 @@ vcs_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) * as copy_to_user at the end of this loop * could sleep. */ - size = vcs_size(inode); + size = vcs_size(vc, attr, uni_mode); if (size < 0) { ret = size; break; @@ -476,7 +484,11 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) if (!vc) goto unlock_out; - size = vcs_size(inode); + size = vcs_size(vc, attr, false); + if (size < 0) { + ret = size; + goto unlock_out; + } ret = -EINVAL; if (pos < 0 || pos > size) goto unlock_out; @@ -515,7 +527,7 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) * the user buffer, so recheck. * Return data written up to now on failure. */ - size = vcs_size(inode); + size = vcs_size(vc, attr, false); if (size < 0) { if (written) break; From a4e3c4c65ae8510e01352c9a4347e05c035b2ce2 Mon Sep 17 00:00:00 2001 From: George Kennedy Date: Fri, 12 May 2023 06:08:48 -0500 Subject: [PATCH 395/755] vc_screen: reload load of struct vc_data pointer in vcs_write() to avoid UAF MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 8fb9ea65c9d1338b0d2bb0a9122dc942cdd32357 ] After a call to console_unlock() in vcs_write() the vc_data struct can be freed by vc_port_destruct(). Because of that, the struct vc_data pointer must be reloaded in the while loop in vcs_write() after console_lock() to avoid a UAF when vcs_size() is called. Syzkaller reported a UAF in vcs_size(). BUG: KASAN: slab-use-after-free in vcs_size (drivers/tty/vt/vc_screen.c:215) Read of size 4 at addr ffff8880beab89a8 by task repro_vcs_size/4119 Call Trace: __asan_report_load4_noabort (mm/kasan/report_generic.c:380) vcs_size (drivers/tty/vt/vc_screen.c:215) vcs_write (drivers/tty/vt/vc_screen.c:664) vfs_write (fs/read_write.c:582 fs/read_write.c:564) ... Allocated by task 1213: kmalloc_trace (mm/slab_common.c:1064) vc_allocate (./include/linux/slab.h:559 ./include/linux/slab.h:680 drivers/tty/vt/vt.c:1078 drivers/tty/vt/vt.c:1058) con_install (drivers/tty/vt/vt.c:3334) tty_init_dev (drivers/tty/tty_io.c:1303 drivers/tty/tty_io.c:1415 drivers/tty/tty_io.c:1392) tty_open (drivers/tty/tty_io.c:2082 drivers/tty/tty_io.c:2128) chrdev_open (fs/char_dev.c:415) do_dentry_open (fs/open.c:921) vfs_open (fs/open.c:1052) ... Freed by task 4116: kfree (mm/slab_common.c:1016) vc_port_destruct (drivers/tty/vt/vt.c:1044) tty_port_destructor (drivers/tty/tty_port.c:296) tty_port_put (drivers/tty/tty_port.c:312) vt_disallocate_all (drivers/tty/vt/vt_ioctl.c:662 (discriminator 2)) vt_ioctl (drivers/tty/vt/vt_ioctl.c:903) tty_ioctl (drivers/tty/tty_io.c:2778) ... The buggy address belongs to the object at ffff8880beab8800 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 424 bytes inside of freed 1024-byte region [ffff8880beab8800, ffff8880beab8c00) The buggy address belongs to the physical page: page:00000000afc77580 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xbeab8 head:00000000afc77580 order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0 flags: 0xfffffc0010200(slab|head|node=0|zone=1|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 000fffffc0010200 ffff888100042dc0 ffffea000426de00 dead000000000002 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8880beab8880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8900: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff8880beab8980: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8880beab8a00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff8880beab8a80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Disabling lock debugging due to kernel taint Fixes: ac751efa6a0d ("console: rename acquire/release_console_sem() to console_lock/unlock()") Cc: stable Reported-by: syzkaller Signed-off-by: George Kennedy Reviewed-by: Thomas Weißschuh Link: https://lore.kernel.org/r/1683889728-10411-1-git-send-email-george.kennedy@oracle.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/vt/vc_screen.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-) diff --git a/drivers/tty/vt/vc_screen.c b/drivers/tty/vt/vc_screen.c index 48d74269f1d5..a6813e3393ec 100644 --- a/drivers/tty/vt/vc_screen.c +++ b/drivers/tty/vt/vc_screen.c @@ -523,10 +523,17 @@ vcs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) } } - /* The vcs_size might have changed while we slept to grab - * the user buffer, so recheck. + /* The vc might have been freed or vcs_size might have changed + * while we slept to grab the user buffer, so recheck. * Return data written up to now on failure. */ + vc = vcs_vc(inode, &viewed); + if (!vc) { + if (written) + break; + ret = -ENXIO; + goto unlock_out; + } size = vcs_size(vc, attr, false); if (size < 0) { if (written) From ab196fe70a186a6bed67e4ceb43d4668899b4a7c Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 22 Jun 2021 15:26:16 +0200 Subject: [PATCH 396/755] s390/qdio: get rid of register asm [ Upstream commit d3e2ff5436d6ee38b572ba5c01dc7994769bec54 ] Reviewed-by: Benjamin Block Signed-off-by: Heiko Carstens Signed-off-by: Vasily Gorbik Stable-dep-of: 2862a2fdfae8 ("s390/qdio: fix do_sqbs() inline assembly constraint") Signed-off-by: Sasha Levin --- drivers/s390/cio/qdio.h | 25 ++++++++------- drivers/s390/cio/qdio_main.c | 62 +++++++++++++++++++----------------- 2 files changed, 46 insertions(+), 41 deletions(-) diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h index 3b0a4483a252..e91d2a589957 100644 --- a/drivers/s390/cio/qdio.h +++ b/drivers/s390/cio/qdio.h @@ -88,15 +88,15 @@ enum qdio_irq_states { static inline int do_sqbs(u64 token, unsigned char state, int queue, int *start, int *count) { - register unsigned long _ccq asm ("0") = *count; - register unsigned long _token asm ("1") = token; unsigned long _queuestart = ((unsigned long)queue << 32) | *start; + unsigned long _ccq = *count; asm volatile( - " .insn rsy,0xeb000000008A,%1,0,0(%2)" - : "+d" (_ccq), "+d" (_queuestart) - : "d" ((unsigned long)state), "d" (_token) - : "memory", "cc"); + " lgr 1,%[token]\n" + " .insn rsy,0xeb000000008a,%[qs],%[ccq],0(%[state])" + : [ccq] "+&d" (_ccq), [qs] "+&d" (_queuestart) + : [state] "d" ((unsigned long)state), [token] "d" (token) + : "memory", "cc", "1"); *count = _ccq & 0xff; *start = _queuestart & 0xff; @@ -106,16 +106,17 @@ static inline int do_sqbs(u64 token, unsigned char state, int queue, static inline int do_eqbs(u64 token, unsigned char *state, int queue, int *start, int *count, int ack) { - register unsigned long _ccq asm ("0") = *count; - register unsigned long _token asm ("1") = token; unsigned long _queuestart = ((unsigned long)queue << 32) | *start; unsigned long _state = (unsigned long)ack << 63; + unsigned long _ccq = *count; asm volatile( - " .insn rrf,0xB99c0000,%1,%2,0,0" - : "+d" (_ccq), "+d" (_queuestart), "+d" (_state) - : "d" (_token) - : "memory", "cc"); + " lgr 1,%[token]\n" + " .insn rrf,0xb99c0000,%[qs],%[state],%[ccq],0" + : [ccq] "+&d" (_ccq), [qs] "+&d" (_queuestart), + [state] "+&d" (_state) + : [token] "d" (token) + : "memory", "cc", "1"); *count = _ccq & 0xff; *start = _queuestart & 0xff; *state = _state & 0xff; diff --git a/drivers/s390/cio/qdio_main.c b/drivers/s390/cio/qdio_main.c index 5b63c505a2f7..620655bcbe80 100644 --- a/drivers/s390/cio/qdio_main.c +++ b/drivers/s390/cio/qdio_main.c @@ -31,38 +31,41 @@ MODULE_DESCRIPTION("QDIO base support"); MODULE_LICENSE("GPL"); static inline int do_siga_sync(unsigned long schid, - unsigned int out_mask, unsigned int in_mask, + unsigned long out_mask, unsigned long in_mask, unsigned int fc) { - register unsigned long __fc asm ("0") = fc; - register unsigned long __schid asm ("1") = schid; - register unsigned long out asm ("2") = out_mask; - register unsigned long in asm ("3") = in_mask; int cc; asm volatile( + " lgr 0,%[fc]\n" + " lgr 1,%[schid]\n" + " lgr 2,%[out]\n" + " lgr 3,%[in]\n" " siga 0\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (cc) - : "d" (__fc), "d" (__schid), "d" (out), "d" (in) : "cc"); + " ipm %[cc]\n" + " srl %[cc],28\n" + : [cc] "=&d" (cc) + : [fc] "d" (fc), [schid] "d" (schid), + [out] "d" (out_mask), [in] "d" (in_mask) + : "cc", "0", "1", "2", "3"); return cc; } -static inline int do_siga_input(unsigned long schid, unsigned int mask, - unsigned int fc) +static inline int do_siga_input(unsigned long schid, unsigned long mask, + unsigned long fc) { - register unsigned long __fc asm ("0") = fc; - register unsigned long __schid asm ("1") = schid; - register unsigned long __mask asm ("2") = mask; int cc; asm volatile( + " lgr 0,%[fc]\n" + " lgr 1,%[schid]\n" + " lgr 2,%[mask]\n" " siga 0\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (cc) - : "d" (__fc), "d" (__schid), "d" (__mask) : "cc"); + " ipm %[cc]\n" + " srl %[cc],28\n" + : [cc] "=&d" (cc) + : [fc] "d" (fc), [schid] "d" (schid), [mask] "d" (mask) + : "cc", "0", "1", "2"); return cc; } @@ -78,23 +81,24 @@ static inline int do_siga_input(unsigned long schid, unsigned int mask, * Note: For IQDC unicast queues only the highest priority queue is processed. */ static inline int do_siga_output(unsigned long schid, unsigned long mask, - unsigned int *bb, unsigned int fc, + unsigned int *bb, unsigned long fc, unsigned long aob) { - register unsigned long __fc asm("0") = fc; - register unsigned long __schid asm("1") = schid; - register unsigned long __mask asm("2") = mask; - register unsigned long __aob asm("3") = aob; int cc; asm volatile( + " lgr 0,%[fc]\n" + " lgr 1,%[schid]\n" + " lgr 2,%[mask]\n" + " lgr 3,%[aob]\n" " siga 0\n" - " ipm %0\n" - " srl %0,28\n" - : "=d" (cc), "+d" (__fc), "+d" (__aob) - : "d" (__schid), "d" (__mask) - : "cc"); - *bb = __fc >> 31; + " lgr %[fc],0\n" + " ipm %[cc]\n" + " srl %[cc],28\n" + : [cc] "=&d" (cc), [fc] "+&d" (fc) + : [schid] "d" (schid), [mask] "d" (mask), [aob] "d" (aob) + : "cc", "0", "1", "2", "3"); + *bb = fc >> 31; return cc; } From aeff9e7e87c121fe57864309b890c0aebf6df389 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Thu, 11 May 2023 17:04:41 +0200 Subject: [PATCH 397/755] s390/qdio: fix do_sqbs() inline assembly constraint [ Upstream commit 2862a2fdfae875888e3c1c3634e3422e01d98147 ] Use "a" constraint instead of "d" constraint to pass the state parameter to the do_sqbs() inline assembly. This prevents that general purpose register zero is used for the state parameter. If the compiler would select general purpose register zero this would be problematic for the used instruction in rsy format: the register used for the state parameter is a base register. If the base register is general purpose register zero the contents of the register are unexpectedly ignored when the instruction is executed. This only applies to z/VM guests using QIOASSIST with dedicated (pass through) QDIO-based devices such as FCP [zfcp driver] as well as real OSA or HiperSockets [qeth driver]. A possible symptom for this case using zfcp is the following repeating kernel message pattern: zfcp : A QDIO problem occurred zfcp : A QDIO problem occurred zfcp : qdio: ZFCP on SC using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W zfcp : A QDIO problem occurred zfcp : A QDIO problem occurred Each of the qdio problem message can be accompanied by the following entries for the affected subchannel in /sys/kernel/debug/s390dbf/qdio_error/hex_ascii for zfcp or qeth: ccq: 69.... SQBS ERROR. Reviewed-by: Benjamin Block Cc: Steffen Maier Fixes: 8129ee164267 ("[PATCH] s390: qdio V=V pass-through") Cc: Signed-off-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin --- drivers/s390/cio/qdio.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/s390/cio/qdio.h b/drivers/s390/cio/qdio.h index e91d2a589957..c78651be8d13 100644 --- a/drivers/s390/cio/qdio.h +++ b/drivers/s390/cio/qdio.h @@ -95,7 +95,7 @@ static inline int do_sqbs(u64 token, unsigned char state, int queue, " lgr 1,%[token]\n" " .insn rsy,0xeb000000008a,%[qs],%[ccq],0(%[state])" : [ccq] "+&d" (_ccq), [qs] "+&d" (_queuestart) - : [state] "d" ((unsigned long)state), [token] "d" (token) + : [state] "a" ((unsigned long)state), [token] "d" (token) : "memory", "cc", "1"); *count = _ccq & 0xff; *start = _queuestart & 0xff; From aabe8ca7913914699228b06ff847fdc2c0d81955 Mon Sep 17 00:00:00 2001 From: Gregory Oakes Date: Thu, 16 Mar 2023 15:13:12 -0500 Subject: [PATCH 398/755] watchdog: sp5100_tco: Immediately trigger upon starting. commit 4eda19cc8a29cde3580ed73bf11dc73b4e757697 upstream. The watchdog countdown is supposed to begin when the device file is opened. Instead, it would begin countdown upon the first write to or close of the device file. Now, the ping operation is called within the start operation which ensures the countdown begins. From experimenation, it does not appear possible to do this with a single write including both the start bit and the trigger bit. So, it is done as two distinct writes. Signed-off-by: Gregory Oakes Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20230316201312.17538-1-gregory.oakes@amd.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Cc: Mario Limonciello Signed-off-by: Greg Kroah-Hartman --- drivers/watchdog/sp5100_tco.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c index 93bd302ae7c5..704d7c527fcb 100644 --- a/drivers/watchdog/sp5100_tco.c +++ b/drivers/watchdog/sp5100_tco.c @@ -98,6 +98,10 @@ static int tco_timer_start(struct watchdog_device *wdd) val |= SP5100_WDT_START_STOP_BIT; writel(val, SP5100_WDT_CONTROL(tco->tcobase)); + /* This must be a distinct write. */ + val |= SP5100_WDT_TRIGGER_BIT; + writel(val, SP5100_WDT_CONTROL(tco->tcobase)); + return 0; } From d64a45c019acd361dff40b207e39bd44832eed55 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Mon, 15 May 2023 16:07:16 +0200 Subject: [PATCH 399/755] spi: fsl-spi: Re-organise transfer bits_per_word adaptation (backported from upstream 8a5299a1278eadf1e08a598a5345c376206f171e) For different reasons, fsl-spi driver performs bits_per_word modifications for different reasons: - On CPU mode, to minimise amount of interrupts - On CPM/QE mode to work around controller byte order For CPU mode that's done in fsl_spi_prepare_message() while for CPM mode that's done in fsl_spi_setup_transfer(). Reunify all of it in fsl_spi_prepare_message(), and catch impossible cases early through master's bits_per_word_mask instead of returning EINVAL later. Signed-off-by: Christophe Leroy Link: https://lore.kernel.org/r/0ce96fe96e8b07cba0613e4097cfd94d09b8919a.1680371809.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi-fsl-spi.c | 50 ++++++++++++++++++--------------------- 1 file changed, 23 insertions(+), 27 deletions(-) diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index ae805f91eafa..a974074b253a 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -204,26 +204,6 @@ static int mspi_apply_cpu_mode_quirks(struct spi_mpc8xxx_cs *cs, return bits_per_word; } -static int mspi_apply_qe_mode_quirks(struct spi_mpc8xxx_cs *cs, - struct spi_device *spi, - int bits_per_word) -{ - /* CPM/QE uses Little Endian for words > 8 - * so transform 16 and 32 bits words into 8 bits - * Unfortnatly that doesn't work for LSB so - * reject these for now */ - /* Note: 32 bits word, LSB works iff - * tfcr/rfcr is set to CPMFCR_GBL */ - if (spi->mode & SPI_LSB_FIRST && - bits_per_word > 8) - return -EINVAL; - if (bits_per_word <= 8) - return bits_per_word; - if (bits_per_word == 16 || bits_per_word == 32) - return 8; /* pretend its 8 bits */ - return -EINVAL; -} - static int fsl_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) { @@ -251,9 +231,6 @@ static int fsl_spi_setup_transfer(struct spi_device *spi, bits_per_word = mspi_apply_cpu_mode_quirks(cs, spi, mpc8xxx_spi, bits_per_word); - else - bits_per_word = mspi_apply_qe_mode_quirks(cs, spi, - bits_per_word); if (bits_per_word < 0) return bits_per_word; @@ -371,14 +348,27 @@ static int fsl_spi_do_one_msg(struct spi_master *master, * In CPU mode, optimize large byte transfers to use larger * bits_per_word values to reduce number of interrupts taken. */ - if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) { - list_for_each_entry(t, &m->transfers, transfer_list) { + list_for_each_entry(t, &m->transfers, transfer_list) { + if (!(mpc8xxx_spi->flags & SPI_CPM_MODE)) { if (t->len < 256 || t->bits_per_word != 8) continue; if ((t->len & 3) == 0) t->bits_per_word = 32; else if ((t->len & 1) == 0) t->bits_per_word = 16; + } else { + /* + * CPM/QE uses Little Endian for words > 8 + * so transform 16 and 32 bits words into 8 bits + * Unfortnatly that doesn't work for LSB so + * reject these for now + * Note: 32 bits word, LSB works iff + * tfcr/rfcr is set to CPMFCR_GBL + */ + if (m->spi->mode & SPI_LSB_FIRST && t->bits_per_word > 8) + return -EINVAL; + if (t->bits_per_word == 16 || t->bits_per_word == 32) + t->bits_per_word = 8; /* pretend its 8 bits */ } } @@ -637,8 +627,14 @@ static struct spi_master * fsl_spi_probe(struct device *dev, if (mpc8xxx_spi->type == TYPE_GRLIB) fsl_spi_grlib_probe(dev); - master->bits_per_word_mask = - (SPI_BPW_RANGE_MASK(4, 16) | SPI_BPW_MASK(32)) & + if (mpc8xxx_spi->flags & SPI_CPM_MODE) + master->bits_per_word_mask = + (SPI_BPW_RANGE_MASK(4, 8) | SPI_BPW_MASK(16) | SPI_BPW_MASK(32)); + else + master->bits_per_word_mask = + (SPI_BPW_RANGE_MASK(4, 16) | SPI_BPW_MASK(32)); + + master->bits_per_word_mask &= SPI_BPW_RANGE_MASK(1, mpc8xxx_spi->max_bits_per_word); if (mpc8xxx_spi->flags & SPI_QE_CPU_MODE) From b558275c1b040f0e5aa56c862241f9212b6118c3 Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Mon, 15 May 2023 16:07:17 +0200 Subject: [PATCH 400/755] spi: fsl-cpm: Use 16 bit mode for large transfers with even size (cherry picked from upstream fc96ec826bced75cc6b9c07a4ac44bbf651337ab) On CPM, the RISC core is a lot more efficiant when doing transfers in 16-bits chunks than in 8-bits chunks, but unfortunately the words need to be byte swapped as seen in a previous commit. So, for large tranfers with an even size, allocate a temporary tx buffer and byte-swap data before and after transfer. This change allows setting higher speed for transfer. For instance on an MPC 8xx (CPM1 comms RISC processor), the documentation tells that transfer in byte mode at 1 kbit/s uses 0.200% of CPM load at 25 MHz while a word transfer at the same speed uses 0.032% of CPM load. This means the speed can be 6 times higher in word mode for the same CPM load. For the time being, only do it on CPM1 as there must be a trade-off between the CPM load reduction and the CPU load required to byte swap the data. Signed-off-by: Christophe Leroy Link: https://lore.kernel.org/r/f2e981f20f92dd28983c3949702a09248c23845c.1680371809.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman --- drivers/spi/spi-fsl-cpm.c | 23 +++++++++++++++++++++++ drivers/spi/spi-fsl-spi.c | 3 +++ 2 files changed, 26 insertions(+) diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c index 858f0544289e..c7079a9cd577 100644 --- a/drivers/spi/spi-fsl-cpm.c +++ b/drivers/spi/spi-fsl-cpm.c @@ -21,6 +21,7 @@ #include #include #include +#include #include "spi-fsl-cpm.h" #include "spi-fsl-lib.h" @@ -120,6 +121,21 @@ int fsl_spi_cpm_bufs(struct mpc8xxx_spi *mspi, mspi->rx_dma = mspi->dma_dummy_rx; mspi->map_rx_dma = 0; } + if (t->bits_per_word == 16 && t->tx_buf) { + const u16 *src = t->tx_buf; + u16 *dst; + int i; + + dst = kmalloc(t->len, GFP_KERNEL); + if (!dst) + return -ENOMEM; + + for (i = 0; i < t->len >> 1; i++) + dst[i] = cpu_to_le16p(src + i); + + mspi->tx = dst; + mspi->map_tx_dma = 1; + } if (mspi->map_tx_dma) { void *nonconst_tx = (void *)mspi->tx; /* shut up gcc */ @@ -173,6 +189,13 @@ void fsl_spi_cpm_bufs_complete(struct mpc8xxx_spi *mspi) if (mspi->map_rx_dma) dma_unmap_single(dev, mspi->rx_dma, t->len, DMA_FROM_DEVICE); mspi->xfer_in_progress = NULL; + + if (t->bits_per_word == 16 && t->rx_buf) { + int i; + + for (i = 0; i < t->len; i += 2) + le16_to_cpus(t->rx_buf + i); + } } EXPORT_SYMBOL_GPL(fsl_spi_cpm_bufs_complete); diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index a974074b253a..8006759c1a0c 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -369,6 +369,9 @@ static int fsl_spi_do_one_msg(struct spi_master *master, return -EINVAL; if (t->bits_per_word == 16 || t->bits_per_word == 32) t->bits_per_word = 8; /* pretend its 8 bits */ + if (t->bits_per_word == 8 && t->len >= 256 && + (mpc8xxx_spi->flags & SPI_CPM1)) + t->bits_per_word = 16; } } From 68e4c390173e7dcb5195e3986b10cb22dc5ce512 Mon Sep 17 00:00:00 2001 From: Pablo Greco Date: Sun, 1 Dec 2019 15:17:10 -0300 Subject: [PATCH 401/755] mt76: mt7615: Fix build with older compilers commit f53300fdaa84dc02f96ab9446b5bac4d20016c43 upstream. Some compilers (tested with 4.8.5 from CentOS 7) fail properly process FIELD_GET inside an inline function, which ends up in a BUILD_BUG_ON. Convert inline function to a macro. Fixes commit bf92e7685100 ("mt76: mt7615: add support for per-chain signal strength reporting") Reported in https://lkml.org/lkml/2019/9/21/146 Reported-by: kbuild test robot Signed-off-by: Pablo Greco Signed-off-by: Felix Fietkau Cc: Vegard Nossum Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c index a6c530b9ceee..0c813e2b9d29 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c @@ -13,10 +13,7 @@ #include "../dma.h" #include "mac.h" -static inline s8 to_rssi(u32 field, u32 rxv) -{ - return (FIELD_GET(field, rxv) - 220) / 2; -} +#define to_rssi(field, rxv) ((FIELD_GET(field, rxv) - 220) / 2) static struct mt76_wcid *mt7615_rx_get_wcid(struct mt7615_dev *dev, u8 idx, bool unicast) From 5cc3e698c2bb4b70e5ab3b93d100ab301c6c44f0 Mon Sep 17 00:00:00 2001 From: Adam Stylinski Date: Sun, 21 May 2023 10:52:23 -0400 Subject: [PATCH 402/755] ALSA: hda/ca0132: add quirk for EVGA X299 DARK commit 7843380d07bbeffd3ce6504e73cf61f840ae76ca upstream. This quirk is necessary for surround and other DSP effects to work with the onboard ca0132 based audio chipset for the EVGA X299 dark mainboard. Signed-off-by: Adam Stylinski Cc: Link: https://bugzilla.kernel.org/show_bug.cgi?id=67071 Link: https://lore.kernel.org/r/ZGopOe19T1QOwizS@eggsbenedict.adamsnet Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_ca0132.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c index f9582053878d..40f50571ad63 100644 --- a/sound/pci/hda/patch_ca0132.c +++ b/sound/pci/hda/patch_ca0132.c @@ -1182,6 +1182,7 @@ static const struct snd_pci_quirk ca0132_quirks[] = { SND_PCI_QUIRK(0x1458, 0xA026, "Gigabyte G1.Sniper Z97", QUIRK_R3DI), SND_PCI_QUIRK(0x1458, 0xA036, "Gigabyte GA-Z170X-Gaming 7", QUIRK_R3DI), SND_PCI_QUIRK(0x3842, 0x1038, "EVGA X99 Classified", QUIRK_R3DI), + SND_PCI_QUIRK(0x3842, 0x104b, "EVGA X299 Dark", QUIRK_R3DI), SND_PCI_QUIRK(0x3842, 0x1055, "EVGA Z390 DARK", QUIRK_R3DI), SND_PCI_QUIRK(0x1102, 0x0013, "Recon3D", QUIRK_R3D), SND_PCI_QUIRK(0x1102, 0x0018, "Recon3D", QUIRK_R3D), From 8facb9cc168a83b171a1f4b754a57a1637887aaa Mon Sep 17 00:00:00 2001 From: Bin Li Date: Wed, 24 May 2023 19:37:55 +0800 Subject: [PATCH 403/755] ALSA: hda/realtek: Enable headset onLenovo M70/M90 commit 4ca110cab46561cd74a2acd9b447435acb4bec5f upstream. Lenovo M70/M90 Gen4 are equipped with ALC897, and they need ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work. The previous quirk for M70/M90 is for Gen3. Signed-off-by: Bin Li Cc: Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 2ae8334111be..31f5ff74bb1c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10370,6 +10370,8 @@ static const struct snd_pci_quirk alc662_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x32cb, "Lenovo ThinkCentre M70", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x32cf, "Lenovo ThinkCentre M950", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x32f7, "Lenovo ThinkCentre M90", ALC897_FIXUP_HEADSET_MIC_PIN), + SND_PCI_QUIRK(0x17aa, 0x3321, "Lenovo ThinkCentre M70 Gen4", ALC897_FIXUP_HEADSET_MIC_PIN), + SND_PCI_QUIRK(0x17aa, 0x331b, "Lenovo ThinkCentre M90 Gen4", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x3742, "Lenovo TianYi510Pro-14IOB", ALC897_FIXUP_HEADSET_MIC_PIN2), SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo Ideapad Y550P", ALC662_FIXUP_IDEAPAD), SND_PCI_QUIRK(0x17aa, 0x3a0d, "Lenovo Ideapad Y550", ALC662_FIXUP_IDEAPAD), From f7d19a366cd2291b92b654b41d73032e621cb27e Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Sat, 6 May 2023 19:38:12 +1000 Subject: [PATCH 404/755] m68k: Move signal frame following exception on 68020/030 commit b845b574f86dcb6a70dfa698aa87a237b0878d2a upstream. On 68030/020, an instruction such as, moveml %a2-%a3/%a5,%sp@- may cause a stack page fault during instruction execution (i.e. not at an instruction boundary) and produce a format 0xB exception frame. In this situation, the value of USP will be unreliable. If a signal is to be delivered following the exception, this USP value is used to calculate the location for a signal frame. This can result in a corrupted user stack. The corruption was detected in dash (actually in glibc) where it showed up as an intermittent "stack smashing detected" message and crash following signal delivery for SIGCHLD. It was hard to reproduce that failure because delivery of the signal raced with the page fault and because the kernel places an unpredictable gap of up to 7 bytes between the USP and the signal frame. A format 0xB exception frame can be produced by a bus error or an address error. The 68030 Users Manual says that address errors occur immediately upon detection during instruction prefetch. The instruction pipeline allows prefetch to overlap with other instructions, which means an address error can arise during the execution of a different instruction. So it seems likely that this patch may help in the address error case also. Reported-and-tested-by: Stan Johnson Link: https://lore.kernel.org/all/CAMuHMdW3yD22_ApemzW_6me3adq6A458u1_F0v-1EYwK_62jPA@mail.gmail.com/ Cc: Michael Schmitz Cc: Andreas Schwab Cc: stable@vger.kernel.org Co-developed-by: Michael Schmitz Signed-off-by: Michael Schmitz Signed-off-by: Finn Thain Reviewed-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/9e66262a754fcba50208aa424188896cc52a1dd1.1683365892.git.fthain@linux-m68k.org Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman --- arch/m68k/kernel/signal.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/arch/m68k/kernel/signal.c b/arch/m68k/kernel/signal.c index f7121b775e5f..ab5fec67e541 100644 --- a/arch/m68k/kernel/signal.c +++ b/arch/m68k/kernel/signal.c @@ -883,11 +883,17 @@ static inline int rt_setup_ucontext(struct ucontext __user *uc, struct pt_regs * } static inline void __user * -get_sigframe(struct ksignal *ksig, size_t frame_size) +get_sigframe(struct ksignal *ksig, struct pt_regs *tregs, size_t frame_size) { unsigned long usp = sigsp(rdusp(), ksig); + unsigned long gap = 0; - return (void __user *)((usp - frame_size) & -8UL); + if (CPU_IS_020_OR_030 && tregs->format == 0xb) { + /* USP is unreliable so use worst-case value */ + gap = 256; + } + + return (void __user *)((usp - gap - frame_size) & -8UL); } static int setup_frame(struct ksignal *ksig, sigset_t *set, @@ -905,7 +911,7 @@ static int setup_frame(struct ksignal *ksig, sigset_t *set, return -EFAULT; } - frame = get_sigframe(ksig, sizeof(*frame) + fsize); + frame = get_sigframe(ksig, tregs, sizeof(*frame) + fsize); if (fsize) err |= copy_to_user (frame + 1, regs + 1, fsize); @@ -976,7 +982,7 @@ static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, return -EFAULT; } - frame = get_sigframe(ksig, sizeof(*frame)); + frame = get_sigframe(ksig, tregs, sizeof(*frame)); if (fsize) err |= copy_to_user (&frame->uc.uc_extra, regs + 1, fsize); From 43ffe982a304edd2f89b37498b3cdc635c79b3d9 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 24 May 2023 14:34:58 +0200 Subject: [PATCH 405/755] parisc: Handle kgdb breakpoints only in kernel context commit 6888ff04e37d01295620a73f3f7efbc79f6ef152 upstream. The kernel kgdb break instructions should only be handled when running in kernel context. Cc: # v5.4+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman --- arch/parisc/kernel/traps.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c index 37988f7f3abc..10776991296a 100644 --- a/arch/parisc/kernel/traps.c +++ b/arch/parisc/kernel/traps.c @@ -305,8 +305,8 @@ static void handle_break(struct pt_regs *regs) #endif #ifdef CONFIG_KGDB - if (unlikely(iir == PARISC_KGDB_COMPILED_BREAK_INSN || - iir == PARISC_KGDB_BREAK_INSN)) { + if (unlikely((iir == PARISC_KGDB_COMPILED_BREAK_INSN || + iir == PARISC_KGDB_BREAK_INSN)) && !user_mode(regs)) { kgdb_handle_exception(9, SIGTRAP, 0, regs); return; } From da8adda579846ffa36700c0a12739e96e18831b6 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Mon, 22 May 2023 22:57:30 +0200 Subject: [PATCH 406/755] parisc: Allow to reboot machine after system halt commit 2028315cf59bb899a5ac7e87dc48ecb8fac7ac24 upstream. In case a machine can't power-off itself on system shutdown, allow the user to reboot it by pressing the RETURN key. Cc: # v4.14+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman --- arch/parisc/kernel/process.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c index 230a6422b99f..0e67ab681b4e 100644 --- a/arch/parisc/kernel/process.c +++ b/arch/parisc/kernel/process.c @@ -124,13 +124,18 @@ void machine_power_off(void) /* It seems we have no way to power the system off via * software. The user has to press the button himself. */ - printk(KERN_EMERG "System shut down completed.\n" - "Please power this system off now."); + printk("Power off or press RETURN to reboot.\n"); /* prevent soft lockup/stalled CPU messages for endless loop. */ rcu_sysrq_start(); lockup_detector_soft_poweroff(); - for (;;); + while (1) { + /* reboot if user presses RETURN key */ + if (pdc_iodc_getc() == 13) { + printk("Rebooting...\n"); + machine_restart(NULL); + } + } } void (*pm_power_off)(void); From 4f92934d80738ad4e7b97e1592e62faa679babba Mon Sep 17 00:00:00 2001 From: Zev Weiss Date: Tue, 16 May 2023 22:47:56 -0700 Subject: [PATCH 407/755] gpio: mockup: Fix mode of debugfs files commit 0a1bb16e0fe6650c3841e611de374bfd5578ad70 upstream. This driver's debugfs files have had a read operation since commit 2a9e27408e12 ("gpio: mockup: rework debugfs interface"), but were still being created with write-only mode bits. Update them to indicate that the files can also be read. Signed-off-by: Zev Weiss Fixes: 2a9e27408e12 ("gpio: mockup: rework debugfs interface") Cc: stable@kernel.org # v5.1+ Signed-off-by: Bartosz Golaszewski Signed-off-by: Greg Kroah-Hartman --- drivers/gpio/gpio-mockup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c index 9c1c4d81aa7b..3e983d98837b 100644 --- a/drivers/gpio/gpio-mockup.c +++ b/drivers/gpio/gpio-mockup.c @@ -339,7 +339,7 @@ static void gpio_mockup_debugfs_setup(struct device *dev, priv->offset = i; priv->desc = &gc->gpiodev->descs[i]; - debugfs_create_file(name, 0200, chip->dbg_dir, priv, + debugfs_create_file(name, 0600, chip->dbg_dir, priv, &gpio_mockup_debugfs_ops); } From a9f5423460a61de260a679db47afde366ba594d7 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 11 May 2023 12:45:59 -0400 Subject: [PATCH 408/755] btrfs: use nofs when cleaning up aborted transactions commit 597441b3436a43011f31ce71dc0a6c0bf5ce958a upstream. Our CI system caught a lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 6.3.0-rc7+ #1167 Not tainted ------------------------------------------------------ kswapd0/46 is trying to acquire lock: ffff8c6543abd650 (sb_internal#2){++++}-{0:0}, at: btrfs_commit_inode_delayed_inode+0x5f/0x120 but task is already holding lock: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: fs_reclaim_acquire+0xa5/0xe0 kmem_cache_alloc+0x31/0x2c0 alloc_extent_state+0x1d/0xd0 __clear_extent_bit+0x2e0/0x4f0 try_release_extent_mapping+0x216/0x280 btrfs_release_folio+0x2e/0x90 invalidate_inode_pages2_range+0x397/0x470 btrfs_cleanup_dirty_bgs+0x9e/0x210 btrfs_cleanup_one_transaction+0x22/0x760 btrfs_commit_transaction+0x3b7/0x13a0 create_subvol+0x59b/0x970 btrfs_mksubvol+0x435/0x4f0 __btrfs_ioctl_snap_create+0x11e/0x1b0 btrfs_ioctl_snap_create_v2+0xbf/0x140 btrfs_ioctl+0xa45/0x28f0 __x64_sys_ioctl+0x88/0xc0 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc -> #0 (sb_internal#2){++++}-{0:0}: __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 start_transaction+0x401/0x730 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 kthread+0xf0/0x120 ret_from_fork+0x29/0x50 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(sb_internal#2); lock(fs_reclaim); lock(sb_internal#2); *** DEADLOCK *** 3 locks held by kswapd0/46: #0: ffffffffabe61b40 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat+0x4aa/0x7a0 #1: ffffffffabe50270 (shrinker_rwsem){++++}-{3:3}, at: shrink_slab+0x113/0x290 #2: ffff8c6543abd0e0 (&type->s_umount_key#44){++++}-{3:3}, at: super_cache_scan+0x38/0x1f0 stack backtrace: CPU: 0 PID: 46 Comm: kswapd0 Not tainted 6.3.0-rc7+ #1167 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack_lvl+0x58/0x90 check_noncircular+0xd6/0x100 ? save_trace+0x3f/0x310 ? add_lock_to_list+0x97/0x120 __lock_acquire+0x1435/0x21a0 lock_acquire+0xc2/0x2b0 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 start_transaction+0x401/0x730 ? btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_commit_inode_delayed_inode+0x5f/0x120 btrfs_evict_inode+0x292/0x3d0 ? lock_release+0x134/0x270 ? __pfx_wake_bit_function+0x10/0x10 evict+0xcc/0x1d0 inode_lru_isolate+0x14d/0x1e0 __list_lru_walk_one+0xbe/0x1c0 ? __pfx_inode_lru_isolate+0x10/0x10 ? __pfx_inode_lru_isolate+0x10/0x10 list_lru_walk_one+0x58/0x80 prune_icache_sb+0x39/0x60 super_cache_scan+0x161/0x1f0 do_shrink_slab+0x163/0x340 shrink_slab+0x1d3/0x290 shrink_node+0x300/0x720 balance_pgdat+0x35c/0x7a0 kswapd+0x205/0x410 ? __pfx_autoremove_wake_function+0x10/0x10 ? __pfx_kswapd+0x10/0x10 kthread+0xf0/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x29/0x50 This happens because when we abort the transaction in the transaction commit path we call invalidate_inode_pages2_range on our block group cache inodes (if we have space cache v1) and any delalloc inodes we may have. The plain invalidate_inode_pages2_range() call passes through GFP_KERNEL, which makes sense in most cases, but not here. Wrap these two invalidate callees with memalloc_nofs_save/memalloc_nofs_restore to make sure we don't end up with the fs reclaim dependency under the transaction dependency. CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman --- fs/btrfs/disk-io.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index 4536d8aea196..7e9d914369a0 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -4408,7 +4408,11 @@ static void btrfs_destroy_delalloc_inodes(struct btrfs_root *root) */ inode = igrab(&btrfs_inode->vfs_inode); if (inode) { + unsigned int nofs_flag; + + nofs_flag = memalloc_nofs_save(); invalidate_inode_pages2(inode->i_mapping); + memalloc_nofs_restore(nofs_flag); iput(inode); } spin_lock(&root->delalloc_lock); @@ -4526,7 +4530,12 @@ static void btrfs_cleanup_bg_io(struct btrfs_block_group_cache *cache) inode = cache->io_ctl.inode; if (inode) { + unsigned int nofs_flag; + + nofs_flag = memalloc_nofs_save(); invalidate_inode_pages2(inode->i_mapping); + memalloc_nofs_restore(nofs_flag); + BTRFS_I(inode)->generation = 0; cache->io_ctl.inode = NULL; iput(inode); From 04aee084a3fad5d6a831b5f52d705ce37c141003 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Tue, 16 May 2023 12:24:25 -0700 Subject: [PATCH 409/755] x86/mm: Avoid incomplete Global INVLPG flushes commit ce0b15d11ad837fbacc5356941712218e38a0a83 upstream. The INVLPG instruction is used to invalidate TLB entries for a specified virtual address. When PCIDs are enabled, INVLPG is supposed to invalidate TLB entries for the specified address for both the current PCID *and* Global entries. (Note: Only kernel mappings set Global=1.) Unfortunately, some INVLPG implementations can leave Global translations unflushed when PCIDs are enabled. As a workaround, never enable PCIDs on affected processors. I expect there to eventually be microcode mitigations to replace this software workaround. However, the exact version numbers where that will happen are not known today. Once the version numbers are set in stone, the processor list can be tweaked to only disable PCIDs on affected processors with affected microcode. Note: if anyone wants a quick fix that doesn't require patching, just stick 'nopcid' on your kernel command-line. Signed-off-by: Dave Hansen Reviewed-by: Thomas Gleixner Cc: stable@vger.kernel.org Signed-off-by: Daniel Sneddon Signed-off-by: Greg Kroah-Hartman --- arch/x86/include/asm/intel-family.h | 5 +++++ arch/x86/mm/init.c | 25 +++++++++++++++++++++++++ 2 files changed, 30 insertions(+) diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h index c1d6d8bbb7da..6fdd863198ec 100644 --- a/arch/x86/include/asm/intel-family.h +++ b/arch/x86/include/asm/intel-family.h @@ -96,6 +96,11 @@ #define INTEL_FAM6_LAKEFIELD 0x8A #define INTEL_FAM6_ALDERLAKE 0x97 #define INTEL_FAM6_ALDERLAKE_L 0x9A +#define INTEL_FAM6_ALDERLAKE_N 0xBE + +#define INTEL_FAM6_RAPTORLAKE 0xB7 +#define INTEL_FAM6_RAPTORLAKE_P 0xBA +#define INTEL_FAM6_RAPTORLAKE_S 0xBF /* "Small Core" Processors (Atom) */ diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index af352e228fa2..38e6798ce44f 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -9,6 +9,7 @@ #include #include +#include #include #include #include @@ -208,6 +209,24 @@ static void __init probe_page_size_mask(void) } } +#define INTEL_MATCH(_model) { .vendor = X86_VENDOR_INTEL, \ + .family = 6, \ + .model = _model, \ + } +/* + * INVLPG may not properly flush Global entries + * on these CPUs when PCIDs are enabled. + */ +static const struct x86_cpu_id invlpg_miss_ids[] = { + INTEL_MATCH(INTEL_FAM6_ALDERLAKE ), + INTEL_MATCH(INTEL_FAM6_ALDERLAKE_L ), + INTEL_MATCH(INTEL_FAM6_ALDERLAKE_N ), + INTEL_MATCH(INTEL_FAM6_RAPTORLAKE ), + INTEL_MATCH(INTEL_FAM6_RAPTORLAKE_P), + INTEL_MATCH(INTEL_FAM6_RAPTORLAKE_S), + {} +}; + static void setup_pcid(void) { if (!IS_ENABLED(CONFIG_X86_64)) @@ -216,6 +235,12 @@ static void setup_pcid(void) if (!boot_cpu_has(X86_FEATURE_PCID)) return; + if (x86_match_cpu(invlpg_miss_ids)) { + pr_info("Incomplete global flushes, disabling PCID"); + setup_clear_cpu_cap(X86_FEATURE_PCID); + return; + } + if (boot_cpu_has(X86_FEATURE_PGE)) { /* * This can't be cr4_set_bits_and_update_boot() -- the From b556618baca545847bba26697a8f237eea919f1d Mon Sep 17 00:00:00 2001 From: Hardik Garg Date: Fri, 26 May 2023 16:21:36 -0700 Subject: [PATCH 410/755] selftests/memfd: Fix unknown type name build failure Partially backport v6.3 commit 11f75a01448f ("selftests/memfd: add tests for MFD_NOEXEC_SEAL MFD_EXEC") to fix an unknown type name build error. In some systems, the __u64 typedef is not present due to differences in system headers, causing compilation errors like this one: fuse_test.c:64:8: error: unknown type name '__u64' 64 | static __u64 mfd_assert_get_seals(int fd) This header includes the __u64 typedef which increases the likelihood of successful compilation on a wider variety of systems. Signed-off-by: Hardik Garg Reviewed-by: Tyler Hicks (Microsoft) Signed-off-by: Greg Kroah-Hartman --- tools/testing/selftests/memfd/fuse_test.c | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/memfd/fuse_test.c b/tools/testing/selftests/memfd/fuse_test.c index b018e835737d..cda63164d9d3 100644 --- a/tools/testing/selftests/memfd/fuse_test.c +++ b/tools/testing/selftests/memfd/fuse_test.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include From 6d091e0ddcf3508292ca7b081865850fa1fa99f8 Mon Sep 17 00:00:00 2001 From: Helge Deller Date: Wed, 24 May 2023 17:07:07 +0200 Subject: [PATCH 411/755] parisc: Fix flush_dcache_page() for usage from irq context commit 61e150fb310729c98227a5edf6e4a3619edc3702 upstream. Since at least kernel 6.1, flush_dcache_page() is called with IRQs disabled, e.g. from aio_complete(). But the current implementation for flush_dcache_page() on parisc unintentionally re-enables IRQs, which may lead to deadlocks. Fix it by using xa_lock_irqsave() and xa_unlock_irqrestore() for the flush_dcache_mmap_*lock() macros instead. Cc: linux-parisc@vger.kernel.org Cc: stable@kernel.org # 5.18+ Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman --- arch/parisc/include/asm/cacheflush.h | 5 +++++ arch/parisc/kernel/cache.c | 5 +++-- 2 files changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/parisc/include/asm/cacheflush.h b/arch/parisc/include/asm/cacheflush.h index 0c83644bfa5c..b4076ac51005 100644 --- a/arch/parisc/include/asm/cacheflush.h +++ b/arch/parisc/include/asm/cacheflush.h @@ -57,6 +57,11 @@ extern void flush_dcache_page(struct page *page); #define flush_dcache_mmap_lock(mapping) xa_lock_irq(&mapping->i_pages) #define flush_dcache_mmap_unlock(mapping) xa_unlock_irq(&mapping->i_pages) +#define flush_dcache_mmap_lock_irqsave(mapping, flags) \ + xa_lock_irqsave(&mapping->i_pages, flags) +#define flush_dcache_mmap_unlock_irqrestore(mapping, flags) \ + xa_unlock_irqrestore(&mapping->i_pages, flags) + #define flush_icache_page(vma,page) do { \ flush_kernel_dcache_page(page); \ diff --git a/arch/parisc/kernel/cache.c b/arch/parisc/kernel/cache.c index a82b3eaa5398..fd84789b5ca4 100644 --- a/arch/parisc/kernel/cache.c +++ b/arch/parisc/kernel/cache.c @@ -328,6 +328,7 @@ void flush_dcache_page(struct page *page) struct vm_area_struct *mpnt; unsigned long offset; unsigned long addr, old_addr = 0; + unsigned long flags; pgoff_t pgoff; if (mapping && !mapping_mapped(mapping)) { @@ -347,7 +348,7 @@ void flush_dcache_page(struct page *page) * declared as MAP_PRIVATE or MAP_SHARED), so we only need * to flush one address here for them all to become coherent */ - flush_dcache_mmap_lock(mapping); + flush_dcache_mmap_lock_irqsave(mapping, flags); vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) { offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT; addr = mpnt->vm_start + offset; @@ -370,7 +371,7 @@ void flush_dcache_page(struct page *page) old_addr = addr; } } - flush_dcache_mmap_unlock(mapping); + flush_dcache_mmap_unlock_irqrestore(mapping, flags); } EXPORT_SYMBOL(flush_dcache_page); From 4e5a7181a6c3263d140faae89e111db388f50267 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Thu, 23 Mar 2023 09:56:40 +0800 Subject: [PATCH 412/755] x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms commit edc0a2b5957652f4685ef3516f519f84807087db upstream. Traditionally, all CPUs in a system have identical numbers of SMT siblings. That changes with hybrid processors where some logical CPUs have a sibling and others have none. Today, the CPU boot code sets the global variable smp_num_siblings when every CPU thread is brought up. The last thread to boot will overwrite it with the number of siblings of *that* thread. That last thread to boot will "win". If the thread is a Pcore, smp_num_siblings == 2. If it is an Ecore, smp_num_siblings == 1. smp_num_siblings describes if the *system* supports SMT. It should specify the maximum number of SMT threads among all cores. Ensure that smp_num_siblings represents the system-wide maximum number of siblings by always increasing its value. Never allow it to decrease. On MeteorLake-P platform, this fixes a problem that the Ecore CPUs are not updated in any cpu sibling map because the system is treated as an UP system when probing Ecore CPUs. Below shows part of the CPU topology information before and after the fix, for both Pcore and Ecore CPU (cpu0 is Pcore, cpu 12 is Ecore). ... -/sys/devices/system/cpu/cpu0/topology/package_cpus:000fff -/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-11 +/sys/devices/system/cpu/cpu0/topology/package_cpus:3fffff +/sys/devices/system/cpu/cpu0/topology/package_cpus_list:0-21 ... -/sys/devices/system/cpu/cpu12/topology/package_cpus:001000 -/sys/devices/system/cpu/cpu12/topology/package_cpus_list:12 +/sys/devices/system/cpu/cpu12/topology/package_cpus:3fffff +/sys/devices/system/cpu/cpu12/topology/package_cpus_list:0-21 Notice that the "before" 'package_cpus_list' has only one CPU. This means that userspace tools like lscpu will see a little laptop like an 11-socket system: -Core(s) per socket: 1 -Socket(s): 11 +Core(s) per socket: 16 +Socket(s): 1 This is also expected to make the scheduler do rather wonky things too. [ dhansen: remove CPUID detail from changelog, add end user effects ] CC: stable@kernel.org Fixes: bbb65d2d365e ("x86: use cpuid vector 0xb when available for detecting cpu topology") Fixes: 95f3d39ccf7a ("x86/cpu/topology: Provide detect_extended_topology_early()") Suggested-by: Len Brown Signed-off-by: Zhang Rui Signed-off-by: Dave Hansen Acked-by: Peter Zijlstra (Intel) Link: https://lore.kernel.org/all/20230323015640.27906-1-rui.zhang%40intel.com Signed-off-by: Greg Kroah-Hartman --- arch/x86/kernel/cpu/topology.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/cpu/topology.c b/arch/x86/kernel/cpu/topology.c index 24da5ee4f022..5729ed7bb3e7 100644 --- a/arch/x86/kernel/cpu/topology.c +++ b/arch/x86/kernel/cpu/topology.c @@ -79,7 +79,7 @@ int detect_extended_topology_early(struct cpuinfo_x86 *c) * initial apic id, which also represents 32-bit extended x2apic id. */ c->initial_apicid = edx; - smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx); + smp_num_siblings = max_t(int, smp_num_siblings, LEVEL_MAX_SIBLINGS(ebx)); #endif return 0; } @@ -107,7 +107,8 @@ int detect_extended_topology(struct cpuinfo_x86 *c) */ cpuid_count(leaf, SMT_LEVEL, &eax, &ebx, &ecx, &edx); c->initial_apicid = edx; - core_level_siblings = smp_num_siblings = LEVEL_MAX_SIBLINGS(ebx); + core_level_siblings = LEVEL_MAX_SIBLINGS(ebx); + smp_num_siblings = max_t(int, smp_num_siblings, LEVEL_MAX_SIBLINGS(ebx)); core_plus_mask_width = ht_mask_width = BITS_SHIFT_NEXT_LEVEL(eax); die_level_siblings = LEVEL_MAX_SIBLINGS(ebx); die_plus_mask_width = BITS_SHIFT_NEXT_LEVEL(eax); From be646802b3dc408c4dc72a3ac32c3f4a0282414d Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 11 May 2023 22:47:32 +0900 Subject: [PATCH 413/755] debugobjects: Don't wake up kswapd from fill_pool() commit eb799279fb1f9c63c520fe8c1c41cb9154252db6 upstream. syzbot is reporting a lockdep warning in fill_pool() because the allocation from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM) and therefore tries to wake up kswapd, which acquires kswapd_wait::lock. Since fill_pool() might be called with arbitrary locks held, fill_pool() should not assume that acquiring kswapd_wait::lock is safe. Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for !__GFP_DIRECT_RECLAIM allocation. Fixes: 3ac7fe5a4aab ("infrastructure to debug (dynamic) objects") Reported-by: syzbot Signed-off-by: Tetsuo Handa Signed-off-by: Thomas Gleixner Link: https://lore.kernel.org/r/6577e1fa-b6ee-f2be-2414-a2b51b1c5e30@I-love.SAKURA.ne.jp Closes: https://syzkaller.appspot.com/bug?extid=fe0c72f0ccbb93786380 Signed-off-by: Greg Kroah-Hartman --- lib/debugobjects.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/lib/debugobjects.c b/lib/debugobjects.c index bfb3eb8c9800..26fa04335537 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -128,7 +128,7 @@ static const char *obj_states[ODEBUG_STATE_MAX] = { static void fill_pool(void) { - gfp_t gfp = GFP_ATOMIC | __GFP_NORETRY | __GFP_NOWARN; + gfp_t gfp = __GFP_HIGH | __GFP_NOWARN; struct debug_obj *obj; unsigned long flags; From 1522dc58bff87af79461b96d90ec122e9e726004 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 19 May 2023 15:32:30 -0400 Subject: [PATCH 414/755] fbdev: udlfb: Fix endpoint check commit ed9de4ed39875706607fb08118a58344ae6c5f42 upstream. The syzbot fuzzer detected a problem in the udlfb driver, caused by an endpoint not having the expected type: usb 1-1: Read EDID byte 0 failed: -71 usb 1-1: Unable to get valid EDID from device/display ------------[ cut here ]------------ usb 1-1: BOGUS urb xfer, pipe 3 != type 1 WARNING: CPU: 0 PID: 9 at drivers/usb/core/urb.c:504 usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 Modules linked in: CPU: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.4.0-rc1-syzkaller-00016-ga4422ff22142 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 Workqueue: usb_hub_wq hub_event RIP: 0010:usb_submit_urb+0xed6/0x1880 drivers/usb/core/urb.c:504 ... Call Trace: dlfb_submit_urb+0x92/0x180 drivers/video/fbdev/udlfb.c:1980 dlfb_set_video_mode+0x21f0/0x2950 drivers/video/fbdev/udlfb.c:315 dlfb_ops_set_par+0x2a7/0x8d0 drivers/video/fbdev/udlfb.c:1111 dlfb_usb_probe+0x149a/0x2710 drivers/video/fbdev/udlfb.c:1743 The current approach for this issue failed to catch the problem because it only checks for the existence of a bulk-OUT endpoint; it doesn't check whether this endpoint is the one that the driver will actually use. We can fix the problem by instead checking that the endpoint used by the driver does exist and is bulk-OUT. Reported-and-tested-by: syzbot+0e22d63dcebb802b9bc8@syzkaller.appspotmail.com Signed-off-by: Alan Stern CC: Pavel Skripkin Fixes: aaf7dbe07385 ("video: fbdev: udlfb: properly check endpoint type") Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/udlfb.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c index 8e8af408998e..24e82fca19ad 100644 --- a/drivers/video/fbdev/udlfb.c +++ b/drivers/video/fbdev/udlfb.c @@ -27,6 +27,8 @@ #include