counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register

commit b14d72ac731753708a7c1a6b3657b9312b6f0042 upstream

Ceiling value may be miss-aligned with what's actually configured into the
ARR register. This is seen after probe as currently the ARR value is zero,
whereas ceiling value is set to the maximum. So:
- reading ceiling reports zero
- in case the counter gets enabled without any prior configuration,
  it won't count.
- in case the function gets set by the user 1st, (priv->ceiling) is used.

Fix it by getting rid of the cached "priv->ceiling" variable. Rather use
the ARR register value directly by using regmap read or write when needed.
There should be no drawback on performance as priv->ceiling isn't used in
performance critical path.
There's also no point in writing ARR while setting function (sms), so
it can be safely removed.

Fixes: ad29937e20 ("counter: Add STM32 Timer quadrature encoder")
Suggested-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: <Stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1614793789-10346-1-git-send-email-fabrice.gasnier@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
[sudip: adjuct context]
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Fabrice Gasnier 2021-03-03 18:49:49 +01:00 committed by Greg Kroah-Hartman
parent a49e5ea5e0
commit 8732c2df9d

View File

@ -24,7 +24,6 @@ struct stm32_timer_cnt {
struct counter_device counter; struct counter_device counter;
struct regmap *regmap; struct regmap *regmap;
struct clk *clk; struct clk *clk;
u32 ceiling;
u32 max_arr; u32 max_arr;
}; };
@ -67,14 +66,15 @@ static int stm32_count_write(struct counter_device *counter,
struct counter_count_write_value *val) struct counter_count_write_value *val)
{ {
struct stm32_timer_cnt *const priv = counter->priv; struct stm32_timer_cnt *const priv = counter->priv;
u32 cnt; u32 cnt, ceiling;
int err; int err;
err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val); err = counter_count_write_value_get(&cnt, COUNTER_COUNT_POSITION, val);
if (err) if (err)
return err; return err;
if (cnt > priv->ceiling) regmap_read(priv->regmap, TIM_ARR, &ceiling);
if (cnt > ceiling)
return -EINVAL; return -EINVAL;
return regmap_write(priv->regmap, TIM_CNT, cnt); return regmap_write(priv->regmap, TIM_CNT, cnt);
@ -136,10 +136,6 @@ static int stm32_count_function_set(struct counter_device *counter,
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0);
/* TIMx_ARR register shouldn't be buffered (ARPE=0) */
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0);
regmap_write(priv->regmap, TIM_ARR, priv->ceiling);
regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms); regmap_update_bits(priv->regmap, TIM_SMCR, TIM_SMCR_SMS, sms);
/* Make sure that registers are updated */ /* Make sure that registers are updated */
@ -197,7 +193,6 @@ static ssize_t stm32_count_ceiling_write(struct counter_device *counter,
regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0); regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, 0);
regmap_write(priv->regmap, TIM_ARR, ceiling); regmap_write(priv->regmap, TIM_ARR, ceiling);
priv->ceiling = ceiling;
return len; return len;
} }
@ -369,7 +364,6 @@ static int stm32_timer_cnt_probe(struct platform_device *pdev)
priv->regmap = ddata->regmap; priv->regmap = ddata->regmap;
priv->clk = ddata->clk; priv->clk = ddata->clk;
priv->ceiling = ddata->max_arr;
priv->max_arr = ddata->max_arr; priv->max_arr = ddata->max_arr;
priv->counter.name = dev_name(dev); priv->counter.name = dev_name(dev);