lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs

Browse Source 
[ Upstream commit e6fab7af6ba1bc77c78713a83876f60ca7a4a064 ]

Fan speed minimum can be enforced from sysfs. For example, setting
current fan speed to 20 is used to enforce fan speed to be at 100%
speed, 19 - to be not below 90% speed, etcetera. This feature provides
ability to limit fan speed according to some system wise
considerations, like absence of some replaceable units or high system
ambient temperature.

Request for changing fan minimum speed is configuration request and can
be set only through 'sysfs' write procedure. In this situation value of
argument 'state' is above nominal fan speed maximum.

Return non-zero code in this case to avoid
thermal_cooling_device_stats_update() call, because in this case
statistics update violates thermal statistics table range.
The issues is observed in case kernel is configured with option
CONFIG_THERMAL_STATISTICS.

Here is the trace from KASAN:
[  159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0
[  159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444
[  159.545625] Call Trace:
[  159.548366]  dump_stack+0x92/0xc1
[  159.552084]  ? thermal_cooling_device_stats_update+0x7d/0xb0
[  159.635869]  thermal_zone_device_update+0x345/0x780
[  159.688711]  thermal_zone_device_set_mode+0x7d/0xc0
[  159.694174]  mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core]
[  159.700972]  ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core]
[  159.731827]  mlxsw_thermal_init+0x763/0x880 [mlxsw_core]
[  160.070233] RIP: 0033:0x7fd995909970
[  160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ..
[  160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970
[  160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001
[  160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700
[  160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013
[  160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013
[  160.143671]
[  160.145338] Allocated by task 2924:
[  160.149242]  kasan_save_stack+0x19/0x40
[  160.153541]  __kasan_kmalloc+0x7f/0xa0
[  160.157743]  __kmalloc+0x1a2/0x2b0
[  160.161552]  thermal_cooling_device_setup_sysfs+0xf9/0x1a0
[  160.167687]  __thermal_cooling_device_register+0x1b5/0x500
[  160.173833]  devm_thermal_of_cooling_device_register+0x60/0xa0
[  160.180356]  mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan]
[  160.248140]
[  160.249807] The buggy address belongs to the object at ffff888116163400
[  160.249807]  which belongs to the cache kmalloc-1k of size 1024
[  160.263814] The buggy address is located 64 bytes to the right of
[  160.263814]  1024-byte region [ffff888116163400, ffff888116163800)
[  160.277536] The buggy address belongs to the page:
[  160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160
[  160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0
[  160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2)
[  160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0
[  160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000
[  160.327033] page dumped because: kasan: bad access detected
[  160.333270]
[  160.334937] Memory state around the buggy address:
[  160.356469] >ffff888116163800: fc ..

Fixes: 65afb4c8e7 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20210916183151.869427-1-vadimp@nvidia.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
Vadim Pasternak 2021-09-16 21:31:51 +03:00 committed by Greg Kroah-Hartman
parent 2c30592255
commit a6c42ae153
1 changed files with 9 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
drivers/hwmon/mlxreg-fan.c
View File

@ -291,8 +291,8 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
{
struct mlxreg_fan *fan = cdev->devdata;
unsigned long cur_state;
int i, config = 0;
u32 regval;
int i;
int err;
/*
@ -305,6 +305,12 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
* overwritten.
*/
if (state >= MLXREG_FAN_SPEED_MIN && state <= MLXREG_FAN_SPEED_MAX) {
/*
* This is configuration change, which is only supported through sysfs.
* For configuration non-zero value is to be returned to avoid thermal
* statistics update.
*/
config = 1;
state -= MLXREG_FAN_MAX_STATE;
for (i = 0; i < state; i++)
fan->cooling_levels[i] = state;
@ -319,7 +325,7 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
cur_state = MLXREG_FAN_PWM_DUTY2STATE(regval);
if (state < cur_state)
return 0;
return config;
state = cur_state;
}
@ -335,7 +341,7 @@ static int mlxreg_fan_set_cur_state(struct thermal_cooling_device *cdev,
dev_err(fan->dev, "Failed to write PWM duty\n");
return err;
}
return 0;
return config;
}
static const struct thermal_cooling_device_ops mlxreg_fan_cooling_ops = {