lisa/android_kernel_xiaomi_sm8350
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

arm64: dts: marvell: espressobin: Add ethernet switch aliases

Browse Source 
commit b64d814257b027e29a474bcd660f6372490138c7 upstream.

Espressobin boards have 3 ethernet ports and some of them got assigned more
then one MAC address. MAC addresses are stored in U-Boot environment.

Since commit a2c7023f70 ("net: dsa: read mac address from DT for slave
device") kernel can use MAC addresses from DT for particular DSA port.

Currently Espressobin DTS file contains alias just for ethernet0.

This patch defines additional ethernet aliases in Espressobin DTS files, so
bootloader can fill correct MAC address for DSA switch ports if more MAC
addresses were specified.

DT alias ethernet1 is used for wan port, DT aliases ethernet2 and ethernet3
are used for lan ports for both Espressobin revisions (V5 and V7).

Fixes: 5253cb8c00a6f ("arm64: dts: marvell: espressobin: add ethernet alias")
Cc: <stable@vger.kernel.org> # a2c7023f70: dsa: read mac address
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
[pali: Backported Espressobin rev V5 changes to 5.4 and 4.19 versions]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Pali Rohár 2020-09-07 13:27:17 +02:00 committed by Greg Kroah-Hartman
parent b7f7474b39
commit c3d60c6957
1 changed files with 8 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
View File

@ -21,6 +21,10 @@
aliases {
ethernet0 = &eth0;
/* for dsa slave device */
ethernet1 = &switch0port1;
ethernet2 = &switch0port2;
ethernet3 = &switch0port3;
serial0 = &uart0;
serial1 = &uart1;
};
@ -147,7 +151,7 @@
#address-cells = <1>;
#size-cells = <0>;
port@0 {
switch0port0: port@0 {
reg = <0>;
label = "cpu";
ethernet = <&eth0>;
@ -158,19 +162,19 @@
};
};
port@1 {
switch0port1: port@1 {
reg = <1>;
label = "wan";
phy-handle = <&switch0phy0>;
};
port@2 {
switch0port2: port@2 {
reg = <2>;
label = "lan0";
phy-handle = <&switch0phy1>;
};
port@3 {
switch0port3: port@3 {
reg = <3>;
label = "lan1";
phy-handle = <&switch0phy2>;