drm/bridge: ti-sn65dsi86: Fix output polarity setting bug
[ Upstream commit 8c115864501fc09932cdfec53d9ec1cde82b4a28 ]
According to the description in ti-sn65dsi86's datasheet:
CHA_HSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
CHA_VSYNC_POLARITY:
0 = Active High Pulse. Synchronization signal is high for the sync
pulse width. (Default)
1 = Active Low Pulse. Synchronization signal is low for the sync
pulse width.
We should only set these bits when the polarity is negative.
Fixes: a095f15c00
("drm/bridge: add support for sn65dsi86 bridge driver")
Signed-off-by: Qiqi Zhang <eddy.zhang@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221125104558.84616-1-eddy.zhang@rock-chips.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
This commit is contained in:
parent
e2e2181772
commit
d2be7ba2d4
@ -460,9 +460,9 @@ static void ti_sn_bridge_set_video_timings(struct ti_sn_bridge *pdata)
|
||||
&pdata->bridge.encoder->crtc->state->adjusted_mode;
|
||||
u8 hsync_polarity = 0, vsync_polarity = 0;
|
||||
|
||||
if (mode->flags & DRM_MODE_FLAG_PHSYNC)
|
||||
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
|
||||
hsync_polarity = CHA_HSYNC_POLARITY;
|
||||
if (mode->flags & DRM_MODE_FLAG_PVSYNC)
|
||||
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
|
||||
vsync_polarity = CHA_VSYNC_POLARITY;
|
||||
|
||||
ti_sn_bridge_write_u16(pdata, SN_CHA_ACTIVE_LINE_LENGTH_LOW_REG,
|
||||
|
Loading…
Reference in New Issue
Block a user