64CH TDM group device is supported from:
ADSP.HT.5.1.c1-00095-SC8180X-1
Change-Id: If0240dd1dd4b4098ca25af0cf3456212d1f2b0a7
Signed-off-by: Guodong Hu <guodhu@codeaurora.org>
FLUENCE_NN_COPP_TOPOLOGY doesn't support stereo input.
Update channel number to mono for FLUENCE_NN_COPP_TOPOLOGY.
Change-Id: I51c0b55cc2bb7379ea79021fe0fc937ffbea6396
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
As per the current design in afe, if the
afe_get_cal_topology for AFE_TOPOLOGY_CAL
or send_afe_cal_type for AFE_COMMON_TX_CAL
fails, then the voice UI calblock is fetched/sent.
This is resulting in sending voice UI calblock
on a non voice UI port during concurrent usecase scenario.
Fix is to check if the calblock for get/set is for
a voice UI port or not. Added support to send this
port id info from routing driver to afe when usecase
is enabled via mixer_control.
Change-Id: I356aae61e1b9d11324e7b9f9a57953767a64b71e
Signed-off-by: Soumya Managoli <smanag@codeaurora.org>
* Add AFE playback backend with port 0x2002
* Add proxy capture frontend to read data from port 0x2002
* Modify AFE platform and DSP drivers to support dual proxy usecase
Change-Id: I35e33e5e922fb3092cffcc065fb514268c16cc17
Signed-off-by: Alexy Joseph <alexyj@codeaurora.org>
Add change to address the race condition between
pointer dereference and memory deallocation.
Change-Id: Ia1ed47986ec81d3dc2feb3bc874847fadddac292
Signed-off-by: Saurav Kumar <sauravk@codeaurora.org>
Set params for a module should be done after sending
the topology information in which the module resides in.
Send cps configuration after sending afe topology.
Send cps configuration only for speaker protected usecases.
Change-Id: I89c7df9f0d70862813aa7a2bd1ea1afc2ddcc882
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
To handle erroneous scenario when audio afe driver registers
a FFNS topology in non-island mode instead of island mode,
add capability for audio afe driver to deregister previously
created topology before registering a new topology for SVA.
Change-Id: Iff871da998847ea5d3bcee417c780b8acaf70ca3
Signed-off-by: Sanjana B <sanjb@codeaurora.org>
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
AUDIO_RX_MONO_VOIP module in COPreP topology doesn't support
stereo input. Update channel number to mono for
AUDIO_RX_MONO_VOIP_COPP_TOPOLOGY.
Change-Id: I23632808cfcf82496f0e8f9618e28915974fc584
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
Add mixer control and callback for selecting external mclk at start of
next playback for a particular BE.
Change-Id: Ifc25eda2f14da564c6b066eb8f76049697bbd44e
Signed-off-by: Nirav Khatri <khatri@codeaurora.org>
Add support to query module parameters from ADSP.
Change-Id: Ie63dd95cf27277f9c836becc98952d48971a3ec3
Signed-off-by: Harshal Ahire <hahire@codeaurora.org>
Add support for CMA heap allocation during call.
Change-Id: I65cd291a9db56bf53d9bb9b4e6c7236da9d7288c
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
For multi COPP feature it could only allow POPPs with same app_type
to connect single COPP. But it's possible to connect different POPPs
with different app_type to single COPP, to achieve this, it should
skip the app_type check when create copp_idx.
Change-Id: I9da6e84b8ef4a5e13d29d71c016b114ea759b94f
Signed-off-by: Viraja Kommaraju <virajak@codeaurora.org>
Add new APIs to enable dynamic load and unload of BT
modules before afe_port_start and afe_close.
Change-Id: I74da9a49aac754d4557c7206155de65cf9b6bdaf
Signed-off-by: Harshal Ahire <hahire@codeaurora.org>
Add support for DSD in MI2S interface and corresponding api updates
from ADSP.
Change-Id: I494205763fa429f95e43497ed5b8f91332f5a2a3
Signed-off-by: Sanjana B <sanjb@codeaurora.org>
In case of two concurrent active rx proxy ports, add
separate callback data to handle proxy reading.
Change-Id: I4de631b9cfead777c970103a79578964e5950eb9
Signed-off-by: Zhou Song <zhous@codeaurora.org>
Add support in audio drivers to support multiple sound models
to be registered individually to the same module within a single
instance in ADSP.
Change-Id: I7d1abb206c7505ed10f0384b8286d5000416e1be
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add new APIs to set/reset power mode along with
island config before afe_port_start.
Change-Id: Ibd9487b04b691be5ab829cfa32c89953838f3192
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
FLUENCE_SM module in COPreP topology doesn't support
stereo input. Update channel number to mono for
VPM_TX_VOICE_FLUENCE_SM_COPP_TOPOLOGY.
Change-Id: I7de7b49706387b09031f67e1a0271db1825cb81d
Signed-off-by: Kunlei Zhang <kunleiz@codeaurora.org>
HW vote and unvote is currently called from multiple
clients leading to synchronization issues
during SSR/PDR scenarios. Synchronize all the vote requests
by using digital codec resource manager.
Change-Id: I7e63f69ab5d761a3bb4c7ce70bbef2e8bfd76cfb
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
- Add support to adjust drift in audio interface
clock source PLL.
- ADSP adjusts the source clock based on clk id. Add support
in AFE driver to get clk id based on the AFE port.
Change-Id: I45ceb6579bb15e32541051e0ba936a2d903e4923
Signed-off-by: Surendar Karka <skarka@codeaurora.org>
ADM supports certain modules that can have very large calibration sizes,
in such cases the calibration is expected to be persistent in memory.
Add new cal type for this purpose.
Change-Id: I2d1fb219a3748d0ead5ca2199da2b55669f2550e
Signed-off-by: Ramlal Karra <rkarra@codeaurora.org>
Add a new fe dedicated for hearing aid and the support
of reading data from a new proxy port.
Change-Id: Id2e8ade6bfe5412ca6520d3cff70d6eebad7d7cc
Signed-off-by: Zhou Song <zhous@codeaurora.org>
When multiple LSM sessions are running, lsm port index might
be overwritten with index of different sessions during
concurrent LPI and Non LPI session switches. Maintain
lsm port index on a per session basis to avoid this issue.
Change-Id: I943ea7899b977e06f467a140a9d1c9feb31c58bd
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>