The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The remove function uses __devexit, so the .remove assignment needs
__devexit_p() to fix a build error with hotplug disabled.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
While access file_ext->state, we should use device_lock to protect it. The
original codes miss this in some places.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
schedule_work returns 0, if the work is already on the work_queue, else
returns non-zero. Do not print error message if heci_bh_handlerwork was
already on queue.
Signed-off-by: Nikanth Karthikesan <knikanth@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Host software could issue interrupts to ME firmware, using H_IG bit. While
Setting H_IG bit, host software should preserve all the other bits in H_CSR
unchanged. In the original function which sets H_CSR register, they first read
the register, then set some bits, and write the whole 32bits back to the
register. And that the special behavior of H_IS (write-one-to-zero) causes problem.
This patch fixes the issue in the following ways:
- Modify heci_set_csr_register() function so that it doesn't change H_IS bit.
- Add interface heci_csr_clear_his() to clear H_IS bit. This function is called
after H_IS checking (dev->host_hw_state & H_IS == H_IS).
- In original heci_csr_disable_interrupts() function, it not only clears H_IE
bit, sometimes it also clears H_IS bit. This patch separates the two parts.
- Avoid calling write_heci_register() function to set H_CSR register directly,
and instead using heci_set_csr_register() function
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
- Fix typo for enum HECI_WRITE.
- Fix timeout issue. If the time period is greater or equal 15s, it's timeout.
- Add 10ms wait time after disconnect, to ensure that hardware is ready.
Otherwise in the next time connection, hardware resource may be busy.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When spinlock is nested, and the outside one is spin_lock_bh, the inner
spinlock should also be spin_lock_bh, otherwise it will bring softirq-safe
to softirq-unsafe lock conversion.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
In orginal code, the device_lock and read_io_lock is mess order when nested,
which may bring dead lock. This patch unify the spinlock order of device_lock
and read_io_lock. First acquire device_lock, then read_io_lock.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
When the two locks are nested, the code should always first acquire file_lock,
and then acquire device_lock in order not to generate dead-lock race.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix userspace pointer mess.
- In memcmp(), dest and src pointer should be both in kernel space.
- Add (void __user *) modification before userspace pointer.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The patch does copy_to/from_user related fixes
*) __copy_from/to_user is enough for user space data buffer checked by access_ok.
*) return -EFAULT if __copy_from/to_user fails.
*) Do not use memcpy to copy from user space.
Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The patch fixes the following warnings.
drivers/staging/rspiusb/rspiusb.c: In function ‘pixel_data’:
drivers/staging/rspiusb/rspiusb.c:267: warning: passing argument 1 of ‘SetPageDirty’ makes
pointer from integer without a cast
drivers/staging/rspiusb/rspiusb.c: In function ‘UnMapUserBuffer’:
drivers/staging/rspiusb/rspiusb.c:500: warning: passing argument 1 of ‘put_page’ makes
pointer from integer without a cast
drivers/staging/rspiusb/rspiusb.c: In function ‘MapUserBuffer’:
drivers/staging/rspiusb/rspiusb.c:662: warning: assignment makes integer from pointer without a cast
drivers/staging/rspiusb/rspiusb.c:670: warning: assignment makes integer from pointer without a cast
Signed-off-by: Vibi Sreenivasan <vibi_sreenivasan@cms.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It seems that pixis_io and pixis_io2 should do the same thing.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This makes the code more readable, makes checkpatch really happy and factorize some code.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Before all testcases, do:
mknod /dev/caphash c 253 0
mknod /dev/capuse c 253 1
This patch does the following:
1. caphash write of > CAP_NODE_SIZE bytes overruns node_ptr->data
(test: cat /etc/mime.types > /dev/caphash)
2. make sure we don't dereference a NULL cap_devices[0].head
(test: cat serge@root@abab > /dev/capuse)
3. don't let strlen dereference a NULL target_user etc
(test: echo ab > /dev/capuse)
4. Don't leak a bunch of memory in cap_write(). Note that
technically node_ptr is not needed for the capuse write case.
As a result I have a much more extensive patch splitting up
cap_write(), but I thought a smaller patch that is easier to test
and verify would be a better start. To test:
cnt=0
while [ 1 ]; do
echo /etc/mime.types > /dev/capuse
if [ $((cnt%25)) -eq 0 ]; then
head -2 /proc/meminfo
fi
cnt=$((cnt+1))
sleep 0.3
done
Without this patch, it MemFree steadily drops. With the patch,
it does not.
I have *not* tested this driver (with or without these patches)
with factotum or anything - only using the tests described above.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
I have just had a bug fix submitted for Oslec which I have applied to
Oslec SVN. The bug can potentially stops the echo canceller adapting
after a few seconds, although it hasn't caused many problems in
practice.
Signed-off-by: David Rowe <david@rowetel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Correct priority problem in the use of ! and &.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@ expression E; constant C; @@
- !E & C
+ !(E & C)
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Driver from Realtek for the Realtek RTL8192 USB wifi device
Based on the r8187 driver from Andrea Merello <andreamrl@tiscali.it> and
others.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix this warnings:
cpc-usb_drv.c:478: warning: format '%d' expects type 'int',
but argument 4 has type 'size_t'
cpc-usb_drv.c:1034: warning: format '%d' expects type 'int',
but argument 3 has type 'long unsigned int'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Fix this build error when PROC_FS is not enabled:
cpc-usb_drv.c:61:2: error: #error "PROCFS needed"
cpc-usb_drv.c:1159: error: implicit declaration of function 'proc_mkdir'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Since card must already be non-NULL, it seems that what was intended
was to test the result of kmalloc.
The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)
// <smpl>
@@
expression E,E1;
identifier f,fld,fld1;
statement S1,S2;
@@
E->fld = f(...);
... when != E = E1
when != E->fld1 = E1
if (
- E
+ E->fld
== NULL) S1 else S2
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
List what needs to be done to get this driver merged into
the main part of the kernel tree.
Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This is a CPC CAN USB driver.
Just some comments:
cpcusb.h and cpc-usb_drv.c: Essential driver source code
sja2m16c_2.c: Helper for converting bitrate timings
cpc.h: Structures and definition needed to communicate with the device
From: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Not sure this patch is really needed since kernel_thread() is deprecated
(and checkpatch.pl complains).
But we should not use kernel_thread(CLONE_SIGHAND) if we are going to play
with signals.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Wrap all ANDROID config items with a #if to keep from asking if you want
specific Android drivers even if you say N to CONFIG_ANDROID
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This cleans up the majority of the checkpatch warnings in the android
binder driver. All that is left now is a bunch of too-long-line stuff.
Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This cleans up the last of the checkpatch warnings in the android
ram_console driver.
Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This cleans up the last of the checkpatch warnings in the android logger
driver.
Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This cleans up the last of the checkpatch warnings in the android
lowmemorykiller driver.
Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
get_mm_rss() atomically dereferences the actual without checking for a
NULL pointer, which is possible since task_lock() is not held.
Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Clean up the code in lowmem_shrink() for the Android low memory killer so
that it follows the kernel coding style.
It's unnecessary to check for p->oomkilladj >= min_adj if the selected
task's oomkilladj score is stored since get_mm_rss() will always be
greater than zero.
Cc: San Mehat <san@android.com>
Cc: Arve Hjønnevåg <arve@android.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
From: Arve Hjønnevåg <arve@android.com>
This allows processes to be killed when the kernel evict cache pages in
an attempt to get more contiguous free memory.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: San Mehat <san@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Use NR_ACTIVE plus NR_INACTIVE as a size estimate for our fake cache
instead the sum of rss. Neither method is accurate.
Also skip the process scan, if the amount of memory available is above
the largest threshold set.
Signed-off-by: Arve Hjønnevåg <arve@android.com>
Cc: David Rientjes <rientjes@google.com>
Cc: San Mehat <san@android.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This driver uses lots of pci_*() calls, so it should depend on PCI.
drivers/staging/vt6655/device_main.c:3942: error: implicit declaration of function 'pci_dev_driver'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
vt6655: use net_device_ops for management functions
Signed-off-by: Forest Bond <forest@alittletooquiet.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
