Commit Graph

52088 Commits

Author SHA1 Message Date
Jack Steiner
023a407f1c [IA64] Fix GRU compile error w/o CONFIG_HUGETLB_PAGE
Eliminate compile error when compiling without CONFIG_HUGETLB_PAGE.

Signed-off-by: Jack Steiner <steiner@sgi.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2008-12-09 10:06:43 -08:00
Linus Torvalds
437f2f91d6 Merge master.kernel.org:/home/rmk/linux-2.6-arm
* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] Fix alignment fault handling for ARMv6 and later CPUs
  [ARM] 5340/1: fix stack placement after noexecstack changes
  [ARM] 5339/1: fix __fls() on ARM
  [ARM] Orion: fix bug in pcie configuration cycle function field mask
  [ARM] omap: fix a pile of issues
2008-12-09 08:29:31 -08:00
Linus Torvalds
4d9c6a21be Merge git://git.infradead.org/mtd-2.6
* git://git.infradead.org/mtd-2.6:
  [MTD] [NAND] fix OOPS accessing flash operations over STM flash on PXA
  [MTD] [NAND] drivers/mtd/nand/pasemi_nand.c: Add missing pci_dev_put
  [MTD] [NAND] fsl_upm: fix build problem with 2.6.28-rc2
  [MTD] physmap: fix memory leak on physmap_flash_remove by using devres
  [MTD] m25p80: chip erase != block erase != sector erase
  [MTD] m25p80: fix detection of m25p16 flashes
  [MTD] m25p80: fix detection of SPI parts
  [MTD] [NAND] OMAP: OneNAND: header file relocation (part 2)
  [MTD] [NAND] OMAP: OneNAND: header file relocation
2008-12-09 08:28:36 -08:00
Linus Torvalds
6f8e5850df Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  ata: Fix experimental tags
  pata_ninja32: update ID table
  pata_sis: Remove bogus cable match
  ATA: piix, fix pointer deref on suspend
  pata_hpt366: fix clock detection
2008-12-09 08:27:57 -08:00
Linus Torvalds
21283f056f Merge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Disable the GM965 MSI errata workaround.
  drm/i915: Don't return error in evict_everything when we get to the end.
  drm/radeon: don't actually enable the IRQ regs until irq is enabled
2008-12-09 08:27:39 -08:00
Benjamin Herrenschmidt
f3179748a1 radeonfb: Disable new color expand acceleration unless explicitely enabled
This new color expansion acceleration for radeonfb appears to trigger
problems with X on VT switch and suspend/resume on some machines. It
might be a problem in the VT layer or in X, but I haven't quite found
it yet, so in the meantime, this disables the acceleration by default,
reverting to 2.6.27 state. It can be enabled using the "accel_cexp"
module parameter or fbdev argument.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-09 08:24:38 -08:00
Alan Cox
e3389cbc65 ata: Fix experimental tags
Various tags are now way out of date

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-09 00:44:29 -05:00
Alan Cox
b604958a98 pata_ninja32: update ID table
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-09 00:44:19 -05:00
Alan Cox
e33ba2c6c6 pata_sis: Remove bogus cable match
Some systems report SIS 5513 as both vendor/id and subvendor/id
string. In that case we can't distinguish the system by the id
svid/sdid and in fact the entry here breaks some boxes. At some
point we need to find another way to detect the Targa Visionary 1000,
until then this trades a hang for some users with lower performance
for others.

Closes: 

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-09 00:44:11 -05:00
Jiri Slaby
9ac6212660 ATA: piix, fix pointer deref on suspend
Hi,

I've found this issue in the mmotm 2008-12-02-17-08.

--

Commit
ata_piix: add borked Tecra M4 to broken suspend list
introduced DMI variables checking, but they can be null, so that
we possibly dereference null.

Check if they are null and avoid checks in that case.

Solves:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
IP: [<ffffffff8043da97>] piix_pci_device_suspend+0x117/0x230

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Jeff Garzik <jgarzik@redhat.com>
Cc: Alexandru Romanescu <a_romanescu@yahoo.co.uk>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-09 00:43:54 -05:00
Tejun Heo
2456eb819b pata_hpt366: fix clock detection
pata_hpt366 had its clock detection wrong and detected 25Mhz as 40Mhz
and vice-versa.  Fix it.

Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-12-09 00:43:40 -05:00
Keith Packard
b60678a75d drm/i915: Disable the GM965 MSI errata workaround.
Since applying the fix suggested by the errata (disabling MSI), we've had
issues with interrupts being stuck on despite IIR being 0 on GM965 hardware.
Most reporters of the issue have confirmed that turning MSI back on fixes
things, and given the difficulties experienced in getting reliable MSI working
on Linux, it's believable that the errata was about software issues and not
actual hardware issues.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-09 15:37:24 +10:00
Owain Ainsworth
15c35334c9 drm/i915: Don't return error in evict_everything when we get to the end.
Returning -ENOMEM errored all the way out of execbuf, so the rendering never
occurred.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-09 15:37:17 +10:00
Dave Airlie
fae7043c65 drm/radeon: don't actually enable the IRQ regs until irq is enabled
vblank can try and enable the IRQ registers before we've set the interrupt
handler up.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-09 15:30:50 +10:00
Linus Torvalds
f7a8db89c1 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  tproxy: fixe a possible read from an invalid location in the socket match
  zd1211rw: use unaligned safe memcmp() in-place of compare_ether_addr()
  mac80211: use unaligned safe memcmp() in-place of compare_ether_addr()
  ipw2200: fix netif_*_queue() removal regression
  iwlwifi: clean key table in iwl_clear_stations_table function
  tcp: tcp_vegas ssthresh bug fix
  can: omit received RTR frames for single ID filter lists
  ATM: CVE-2008-5079: duplicate listen() on socket corrupts the vcc table
  netx-eth: initialize per device spinlock
  tcp: make urg+gso work for real this time
  enc28j60: Fix sporadic packet loss (corrected again)
  hysdn: fix writing outside the field on 64 bits
  b1isa: fix b1isa_exit() to really remove registered capi controllers
  can: Fix CAN_(EFF|RTR)_FLAG handling in can_filter
  Phonet: do not dump addresses from other namespaces
  netlabel: Fix a potential NULL pointer dereference
  bnx2: Add workaround to handle missed MSI.
  xfrm: Fix kernel panic when flush and dump SPD entries
2008-12-08 19:52:43 -08:00
Bartlomiej Zolnierkiewicz
5384657479 ide: build-fix for CONFIG_BLK_DEV_IDEDMA_PMAC=n
IDE pmac host driver build fails with CONFIG_BLK_DEV_IDEDMA_PMAC=n
as reported by Kamalesh:

> drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode':
> drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing'
> drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function)
> drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once
> drivers/ide/pmac.c:527: error: for each function it appears in.)
> drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function)
> drivers/ide/pmac.c: In function 'pmac_ide_do_resume':
> drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> drivers/ide/pmac.c: At top level:
> drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function)
> drivers/ide/pmac.c: In function 'pmac_ide_setup_device':
> drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function)
> drivers/ide/pmac.c: In function 'pmac_ide_macio_attach':
> drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs'
> make[2]: *** [drivers/ide/pmac.o] Error 1

Fix it by removing the superfluous config option.

Reported-and-tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-08 17:52:05 +01:00
Bartlomiej Zolnierkiewicz
1a659880ee Revert "ide: respect current DMA setting during resume"
This reverts commit e9eb838830 since
it could break resume (thanks to Paul Collins for the report).

I'll look into sorting this out properly for 2.6.29
but for 2.6.28 it is the best to just revert my patch.

Reported-by: Paul Collins <paul@burly.ondioline.org>
Cc: rjw@sisk.pl
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-08 17:42:35 +01:00
Qinghuang Feng
2289e66436 drivers/message/i2o/iop.c: cleanup kerneldoc
no argument named @msg in i2o_msg_get_wait(), remove it.

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-05 13:40:52 -08:00
Nick Andrew
5e333309c5 Fix incorrect use of loose in i2o_block.c
Fix incorrect use of loose in i2o_block.c

It should be 'lose', not 'loose'.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-05 13:40:52 -08:00
Nick Andrew
c4f0124057 Fix incorrect use of loose in tty/serial drivers
[Folded together as one diff from 3]

It should be 'lose', not 'loose'.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-05 13:40:52 -08:00
Linus Torvalds
f10a3a32ae Revert "ACPI: battery: Convert discharge energy rate to current properly"
This reverts commit 558073dd56, along with
the failed try to fix the regression it caused ("ACPI: Fix ACPI battery
regression introduced by commit 558073"), which just made things worse.

Commit aaad077638 (that failed "Fix ACPI
battery regression") got the voltage conversion confused, and fixed the
problem with Rafael's battery monitor apparently just by mistake.

So revert them both, getting us back to the 2.6.27 state in this, and
let's revisit it when people understand what's going on.

Noted-by: Paul Martin <pm@debian.org>
Requested-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Len Brown <len.brown@intel.com>
Cc: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-05 13:30:03 -08:00
Shaddy Baddah
cde6901b7b zd1211rw: use unaligned safe memcmp() in-place of compare_ether_addr()
Under my 2.6.28-rc6 sparc64, when associating to an AP through my
zd1211rw device, I was seeing kernel log messages like (not exact output):

  Kernel unaligned access at TPC[10129b68] zd_mac_rx+0x144/0x32c [zd1211rw]

For the zd1211rw module, on RX, the 80211 packet will be located after
the PLCP header in the skb data buffer. The PLCP header being 5 bytes
long, the 80211 header will start unaligned from an aligned skb
buffer.

As per Documentation/unaligned-memory-access.txt, we must replace the
not unaligned() safe compare_ether_addr() with memcmp() to protect
architectures that require alignment.

Signed-off-by: Shaddy Baddah <shaddy_baddah@hotmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:18:35 -05:00
Zhu Yi
b8ddafd759 ipw2200: fix netif_*_queue() removal regression
In "ipw2200: Call netif_*_queue() interfaces properly", netif_stop_queue()
and netif_wake_queue() were removed with the reason
"netif_carrier_{on,off}() handles starting and stopping packet flow into
the driver". The patch also removes a valid condition check that
ipw_tx_skb() cannot be called if device is not in STATUS_ASSOCIATED state.
But netif_carrier_off() doesn't guarantee netdev->hard_start_xmit won't
be called because linkwatch event is handled in a delayed workqueue. This
caused a kernel oops reported by Frank Seidel:
https://bugzilla.novell.com/show_bug.cgi?id=397390

This patch fixes the problem by moving the STATUS_ASSOCIATED check back
to ipw_tx_skb(). It also adds a missing netif_carrier_off() call to
ipw_disassociate().

Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Signed-off-by: Chatre, Reinette <reinette.chatre@intel.com>
Tested-by: Frank Seidel <fseidel@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:18:35 -05:00
Tomas Winkler
40a9a82991 iwlwifi: clean key table in iwl_clear_stations_table function
This patch cleans uCode key table bit map iwl_clear_stations_table
since all stations are cleared also the key table must be.

Since the keys are not removed properly on suspend by mac80211
this may result in exhausting key table on resume leading
to memory corruption during removal

This patch also fixes a memory corruption problem reported in
http://marc.info/?l=linux-wireless&m=122641417231586&w=2 and tracked in
http://bugzilla.kernel.org/show_bug.cgi?id=12040.

When the key is removed a second time the offset is set to 255 - this
index is not valid for the ucode_key_table and corrupts the eeprom pointer
(which is 255 bits from ucode_key_table).

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Zhu Yi <yi.zhu@intel.com>
Reported-by: Carlos R. Mafra <crmafra2@gmail.com>
Reported-by: Lukas Hejtmanek <xhejtman@ics.muni.cz>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05 09:18:34 -05:00
Linus Torvalds
bbeba4c35c Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/bdev:
  [PATCH] fix bogus argument of blkdev_put() in pktcdvd
  [PATCH 2/2] documnt FMODE_ constants
  [PATCH 1/2] kill FMODE_NDELAY_NOW
  [PATCH] clean up blkdev_get a little bit
  [PATCH] Fix block dev compat ioctl handling
  [PATCH] kill obsolete temporary comment in swsusp_close()
2008-12-04 21:45:44 -08:00
Linus Torvalds
6df944c5f8 Merge branch 'drm-gem-update' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6
* 'drm-gem-update' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Return error in i915_gem_set_to_gtt_domain if we're not in the GTT.
  drm/i915: Retry execbuffer pinning after clearing the GTT
  drm/i915: Move the execbuffer domain computations together
  drm/i915: Rename object_set_domain to object_set_to_gpu_domain
  drm/i915: Make a single set-to-cpu-domain path and use it wherever needed.
  drm/i915: Make a single set-to-gtt-domain path.
  drm/i915: If interrupted while setting object domains, still emit the flush.
  drm/i915: Move flushing list cleanup from flush request retire to request emit.
  drm/i915: Respect GM965/GM45 bit-17-instead-of-bit-11 option for swizzling.
2008-12-04 21:44:40 -08:00
Rafael J. Wysocki
aaad077638 ACPI: Fix ACPI battery regression introduced by commit 558073
Commit 558073dd56 ("ACPI: battery: Convert
discharge energy rate to current properly") caused the battery subsystem
to report wrong values of the remaining time on battery power and the
time until fully charged on Toshiba Portege R500 (and presumably on
other boxes too).

Fix the issue by correcting the conversion from mW to mA.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-04 21:43:16 -08:00
Al Viro
2cbed8906f [PATCH] fix bogus argument of blkdev_put() in pktcdvd
final close of ->bdev should match the initial open, i.e.
get FMODE_READ | FMODE_NDELAY; FMODE_READ|FMODE_WRITE has
been a braino.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-04 04:22:59 -05:00
Christoph Hellwig
fd4ce1acd0 [PATCH 1/2] kill FMODE_NDELAY_NOW
Update FMODE_NDELAY before each ioctl call so that we can kill the
magic FMODE_NDELAY_NOW.  It would be even better to do this directly
in setfl(), but for that we'd need to have FMODE_NDELAY for all files,
not just block special files.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-04 04:22:57 -05:00
Uwe Kleine-König
2cc002c4bb netx-eth: initialize per device spinlock
The spinlock used in the netx-eth driver was never properly initialized.
This was noticed using CONFIG_DEBUG_SPINLOCK=y

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 22:18:59 -08:00
Baruch Siach
5176da7e53 enc28j60: Fix sporadic packet loss (corrected again)
Packet data read from the RX buffer the when the RSV is at the end of the RX
buffer does not warp around. This causes packet loss, as the actual data is
never read. Fix this by calculating the right packet data location.

Thanks to Shachar Shemesh for suggesting the fix.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Claudio Lanconelli <lanconelli.claudio@eptar.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 21:16:06 -08:00
Pascal Terjan
bd0914104c hysdn: fix writing outside the field on 64 bits
ifa_local is assumed to be unsigned long which lead to writing the address
at dev->dev_addr-2 instead of +2

noticed thanks to gcc:

drivers/isdn/hysdn/hysdn_net.c: In function `net_open':
drivers/isdn/hysdn/hysdn_net.c:91: warning: array subscript is below array bounds

Signed-off-by: Pascal Terjan <pterjan@mandriva.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 21:01:28 -08:00
Wilfried Klaebe
1c594c05a7 b1isa: fix b1isa_exit() to really remove registered capi controllers
On "/etc/init.d/capiutils stop", this oops happened.

The oops happens on reading /proc/capi/controllers because
capi_ctrl->procinfo is called for the wrongly not unregistered
controller, which points to b1isa_procinfo(), which was removed on
module unload.

b1isa_exit() did not call b1isa_remove() for its controllers because
io[0] == 0 on module unload despite having been 0x340 on module load.

Besides, just removing the controllers that where added on module
load time and not those that were added later via b1isa_add_card() is
wrong too - the place where all added cards are found is isa_dev[].

relevant dmesg lines:

[    0.000000] Linux version 2.6.27.4 (w@shubashi) (gcc version 4.3.2 (Debian 4.3.2-1) )  Thu Oct 30 16:49:03 CET 2008

[   67.403555] CAPI Subsystem Rev 1.1.2.8
[   68.529154] capifs: Rev 1.1.2.3
[   68.563292] capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs)
[   77.026936] b1: revision 1.1.2.2
[   77.049992] b1isa: revision 1.1.2.3
[   77.722655] kcapi: Controller [001]: b1isa-340 attached
[   77.722671] b1isa: AVM B1 ISA at i/o 0x340, irq 5, revision 255
[   81.272669] b1isa-340: card 1 "B1" ready.
[   81.272683] b1isa-340: card 1 Protocol: DSS1
[   81.272689] b1isa-340: card 1 Linetype: point to multipoint
[   81.272695] b1isa-340: B1-card (3.11-03) now active
[   81.272702] kcapi: card [001] "b1isa-340" ready.

[  153.721281] kcapi: card [001] down.
[  154.151889] BUG: unable to handle kernel paging request at e87af000
[  154.152081] IP: [<e87af000>]
[  154.153292] *pde = 2655b067 *pte = 00000000
[  154.153307] Oops: 0000 []
[  154.153360] Modules linked in: rfcomm l2cap ppdev lp ipt_MASQUERADE tun capi capifs kernelcapi ac battery nfsd exportfs nfs lockd nfs_acl sunrpc sit tunnel4 bridge stp llc ipt_REJECT ipt_LOG xt_tcpudp xt_state iptable_filter iptable_mangle iptable_nat nf_nat nf_conntrack_ipv4 nf_conntrack ip_tables x_tables nls_utf8 isofs nls_base zlib_inflate loop ipv6 netconsole snd_via82xx dvb_usb_dib0700 gameport dib7000p dib7000m dvb_usb snd_ac97_codec ac97_bus dvb_core mt2266 snd_pcm tuner_xc2028 dib3000mc dibx000_common mt2060 dib0070 snd_page_alloc snd_mpu401_uart snd_seq_midi snd_seq_midi_event btusb snd_rawmidi bluetooth snd_seq snd_timer snd_seq_device snd via686a i2c_viapro soundcore i2c_core parport_pc parport button dm_mirror dm_log dm_snapshot floppy sg ohci1394 uhci_hcd ehci_hcd 8139too mii ieee1394 usbcore sr_mod cdrom sd_mod thermal processor fan [last unloaded: b1]
[  154.153360]
[  154.153360] Pid: 4132, comm: capiinit Not tainted (2.6.27.4 )
[  154.153360] EIP: 0060:[<e87af000>] EFLAGS: 00010286 CPU: 0
[  154.153360] EIP is at 0xe87af000
[  154.153360] EAX: e6b9ccc8 EBX: e6b9ccc8 ECX: e87a0c67 EDX: e87af000
[  154.153360] ESI: e142bbc0 EDI: e87a56e0 EBP: e0505f0c ESP: e0505ee4
[  154.153360]  DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
[  154.153360] Process capiinit (pid: 4132, ti=e0504000 task=d1196cf0 task.ti=e0504000)
[  154.153360] Stack: e879f650 00000246 e0505ef4 c01472eb e0505f0c 00000246 e7001780 fffffff4
[  154.153360]        fffffff4 e142bbc0 e0505f48 c01a56c6 00000400 b805e000 d102dc80 e142bbe0
[  154.153360]        00000000 e87a56e0 00000246 e12617ac 00000000 00000000 e1261760 fffffffb
[  154.153360] Call Trace:
[  154.153360]  [<e879f650>] ? controller_show+0x20/0x90 [kernelcapi]
[  154.153360]  [<c01472eb>] ? trace_hardirqs_on+0xb/0x10
[  154.153360]  [<c01a56c6>] ? seq_read+0x126/0x2f0
[  154.153360]  [<c01a55a0>] ? seq_read+0x0/0x2f0
[  154.153360]  [<c01c033c>] ? proc_reg_read+0x5c/0x90
[  154.153360]  [<c0189919>] ? vfs_read+0x99/0x140
[  154.153360]  [<c01c02e0>] ? proc_reg_read+0x0/0x90
[  154.153360]  [<c0189a7d>] ? sys_read+0x3d/0x70
[  154.153360]  [<c0103c3d>] ? sysenter_do_call+0x12/0x35
[  154.153360]  =======================
[  154.153360] Code:  Bad EIP value.
[  154.153360] EIP: [<e87af000>] 0xe87af000 SS:ESP 0068:e0505ee4
[  154.153360] ---[ end trace 23750b6c2862de94 ]---

Signed-off-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 20:57:19 -08:00
Eric Anholt
0235439232 drm/i915: Return error in i915_gem_set_to_gtt_domain if we're not in the GTT.
It's only for flushing caches appropriately for GTT access, not for actually
getting it there.  Prevents potential smashing of cpu read/write domains on
unbound objects.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04 11:24:47 +10:00
Keith Packard
ac94a962b2 drm/i915: Retry execbuffer pinning after clearing the GTT
If we fail to pin all of the buffers in an execbuffer request, go through
and clear the GTT and try again to see if its just a matter of fragmentation

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04 11:22:06 +10:00
Keith Packard
646f0f6e43 drm/i915: Move the execbuffer domain computations together
This eliminates the dev_set_domain function and just in-lines it
where its used, with the goal of moving the manipulation and use of
invalidate_domains and flush_domains closer together. This also
avoids calling add_request unless some domain has been flushed.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04 11:22:02 +10:00
Keith Packard
c0d9082928 drm/i915: Rename object_set_domain to object_set_to_gpu_domain
Now that the CPU and GTT domain operations are isolated to their own
functions, the previously general-purpose set_domain function is now used
only to set GPU domains. It also has no failure cases, which is important as
this eliminates any possible interruption of the computation of new object
domains and subsequent emmission of the flushing instructions into the ring.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04 11:21:58 +10:00
Eric Anholt
e47c68e9c5 drm/i915: Make a single set-to-cpu-domain path and use it wherever needed.
This fixes several domain management bugs, including potential lack of cache
invalidation for pread, potential failure to wait for set_domain(CPU, 0),
and more, along with producing more intelligible code.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04 11:21:55 +10:00
Eric Anholt
2ef7eeaa55 drm/i915: Make a single set-to-gtt-domain path.
This fixes failure to flush caches in the relocation update path, and
failure to wait in the set_domain ioctl, each of which could lead to incorrect
rendering.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04 11:21:52 +10:00
Eric Anholt
b670d81582 drm/i915: If interrupted while setting object domains, still emit the flush.
Otherwise, we would leave the objects in an inconsistent state, such as
write_domain == 0 but on the flushing list.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04 11:21:48 +10:00
Eric Anholt
ce44b0ea3d drm/i915: Move flushing list cleanup from flush request retire to request emit.
obj_priv->write_domain is "write domain if the GPU went idle now", not
"write domain at this moment."  By postponing the clear, we confused the
concept, required more storage, and potentially emitted more flushes than
are required.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04 11:21:45 +10:00
Eric Anholt
a7f014f2de drm/i915: Respect GM965/GM45 bit-17-instead-of-bit-11 option for swizzling.
This fixes readpixels and buffer corruption when swapped out and in by
disabling tiling on them.

Now that we know that the bit 17 mode isn't just a mistake of older chipsets,
we'll need to work on a clever fix so that we can get the performance of
tiling on these chipsets, but that will require intrusive changes targeted
at the next kernel release, not this one.

Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2008-12-04 11:21:41 +10:00
Linus Torvalds
feaf3848a8 Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-block
* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: fix setting of max_segment_size and seg_boundary mask
  block: internal dequeue shouldn't start timer
  block: set disk->node_id before it's being used
  When block layer fails to map iov, it calls bio_unmap_user to undo
2008-12-03 16:45:56 -08:00
Linus Torvalds
cd92a17eec iTCO_wdt: fix typo when setting TCO_EN bit
The code used '&= 0x00002000' when it tried to set the TCO_EN bit, which
obviously didn't set that bit at all, but instead just reset all the
other bits in the SMI_EN register.

This bug seemingly caused various random behavior, with Frans Pop
reporting that X.org just silently hung at startup and Rafael Wysocki
reports the fan spinning with full speed.

See
	http://lkml.org/lkml/2008/12/3/178
	http://bugzilla.kernel.org/show_bug.cgi?id=12162

The problem seems to have been triggered by "[WATCHDOG] iTCO_wdt :
problem with rebooting on new ICH9 based motherboards" (commit
7cd5b08be3), but the bogus code existed
before that too (in the "supermicro_old_pre_stop()" function), it just
apparently never showed up due to different logic.

In that commit the broken code got moved around and now gets executed
much more.

Reported-by: Rafael J. Wysocki <rjw@sisk.pl>
Tested-by: Frans Pop <elendil@planet.nl>
Cc: Wim Van Sebroeck <wim@iguana.be>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-12-03 16:20:19 -08:00
Milan Broz
0e435ac26e block: fix setting of max_segment_size and seg_boundary mask
Fix setting of max_segment_size and seg_boundary mask for stacked md/dm
devices.

When stacking devices (LVM over MD over SCSI) some of the request queue
parameters are not set up correctly in some cases by default, namely
max_segment_size and and seg_boundary mask.

If you create MD device over SCSI, these attributes are zeroed.

Problem become when there is over this mapping next device-mapper mapping
- queue attributes are set in DM this way:

request_queue   max_segment_size  seg_boundary_mask
SCSI                65536             0xffffffff
MD RAID1                0                      0
LVM                 65536                 -1 (64bit)

Unfortunately bio_add_page (resp.  bio_phys_segments) calculates number of
physical segments according to these parameters.

During the generic_make_request() is segment cout recalculated and can
increase bio->bi_phys_segments count over the allowed limit.  (After
bio_clone() in stack operation.)

Thi is specially problem in CCISS driver, where it produce OOPS here

    BUG_ON(creq->nr_phys_segments > MAXSGENTRIES);

(MAXSEGENTRIES is 31 by default.)

Sometimes even this command is enough to cause oops:

  dd iflag=direct if=/dev/<vg>/<lv> of=/dev/null bs=128000 count=10

This command generates bios with 250 sectors, allocated in 32 4k-pages
(last page uses only 1024 bytes).

For LVM layer, it allocates bio with 31 segments (still OK for CCISS),
unfortunatelly on lower layer it is recalculated to 32 segments and this
violates CCISS restriction and triggers BUG_ON().

The patch tries to fix it by:

 * initializing attributes above in queue request constructor
   blk_queue_make_request()

 * make sure that blk_queue_stack_limits() inherits setting

 (DM uses its own function to set the limits because it
 blk_queue_stack_limits() was introduced later.  It should probably switch
 to use generic stack limit function too.)

 * sets the default seg_boundary value in one place (blkdev.h)

 * use this mask as default in DM (instead of -1, which differs in 64bit)

Bugs related to this:
https://bugzilla.redhat.com/show_bug.cgi?id=471639
http://bugzilla.kernel.org/show_bug.cgi?id=8672

Signed-off-by: Milan Broz <mbroz@redhat.com>
Reviewed-by: Alasdair G Kergon <agk@redhat.com>
Cc: Neil Brown <neilb@suse.de>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Mike Miller <mike.miller@hp.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-12-03 12:55:55 +01:00
Denis V. Lunev
e93f1be503 [MTD] [NAND] fix OOPS accessing flash operations over STM flash on PXA
STM 2Gb flash is a large-page NAND flash.  Set operations accordingly.
This field is dereferenced without a check in several places resulting in
OOPS.

Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Eric Miao <ymiao3@marvell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2008-12-03 10:47:20 +00:00
Michael Chan
efba01803c bnx2: Add workaround to handle missed MSI.
The bnx2 chips do not support per MSI vector masking.  On 5706/5708, new MSI
address/data are stored only when the MSI enable bit is toggled.  As a result,
SMP affinity no longer works in the latest kernel.  A more serious problem is
that the driver will no longer receive interrupts when the MSI receiving CPU
goes offline.

The workaround in this patch only addresses the problem of CPU going offline.
When that happens, the driver's timer function will detect that it is making
no forward progress on pending interrupt events and will recover from it.

Eric Dumazet reported the problem.

We also found that if an interrupt is internally asserted while MSI and INTA
are disabled, the chip will end up in the same state after MSI is re-enabled.
The same workaround is needed for this problem. 

Signed-off-by: Michael Chan <mchan@broadcom.com>
Tested-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-03 00:36:15 -08:00
Linus Torvalds
f6f7b52e2f Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  [WATCHDOG] hpwdt: Fix kdump when using hpwdt
  [WATCHDOG] hpwdt: set the mapped BIOS address space as executable
  [WATCHDOG] iTCO_wdt: add PCI ID's for ICH9 & ICH10 chipsets
  [WATCHDOG] iTCO_wdt : correct status clearing
  [WATCHDOG] iTCO_wdt : problem with rebooting on new ICH9 based motherboards
  [WATCHDOG] fix mtx1_wdt compilation failure
2008-12-02 15:58:20 -08:00
Linus Torvalds
e6d9f0fb5f Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Fix offset calculation in compute_size()
  rtc: rtc-starfire fixes
2008-12-02 15:55:43 -08:00
Linus Torvalds
e1825e7515 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits)
  MAINTAINERS: add netdev to ATM
  ATM: horizon, fix hrz_probe fail path
  pppol2tp: Add missing sock_put() in pppol2tp_release()
  net: Fix soft lockups/OOM issues w/ unix garbage collector
  macvlan: don't broadcast PAUSE frames to macvlan devices
  Phonet: fix oops in phonet_address_del() on non-Phonet device
  netfilter: ctnetlink: fix GFP_KERNEL allocation under spinlock
  sungem: Fix PCS_MIICTRL register write in gem_init_phy().
  net: make skb_truesize_bug() call WARN()
  net: hp-plus uses eip_poll
  net/wireless/reg.c: fix bad WARN_ON in if statement
  ath5k: disable beacon filter when station is not associated
  ath5k: fix Security issue in DebugFS part of ath5k
  ath9k: correct expected max RX buffer size
  ath9k: Fix SW-IOMMU bounce buffer starvation
  mac80211 : Fix setting ad-hoc mode and non-ibss channel
  iwlagn: fix DMA sync
  phylib: Add Vitesse VSC8221 SGMII PHY
  rose: zero length frame filtering in af_rose.c
  bridge: netfilter: fix update_pmtu crash with GRE
  ...
2008-12-02 15:55:05 -08:00