Commit Graph

415 Commits

Author SHA1 Message Date
Paul Mackerras
03f88e9f71 ppc64: Minor compilation fixes
This defines CONFIG_PPC_STD_MMU for ppc64, changes an instance of
sys32_ to compat_sys_ in the ppc64 syscall table, and removes a
reference to a non-existent arch/powerpc/xmon/Makefile.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:15:05 +10:00
Paul Mackerras
b123923d48 powerpc: Move ptrace32.c from arch/ppc64 to arch/powerpc
Also corrected my email address in ptrace.c and updated the comments
at the top of ptrace32.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20 09:11:29 +10:00
Paul Mackerras
143a1dec7e powerpc: Merge machdep.h
A few things change for consistency between ppc32 and ppc64:
idle functions return void; *_get_boot_time functions return
unsigned long (i.e. time_t) rather than filling in a struct rtc_time
(since that's useful to the callers and easier for pmac to
generate); *_get_rtc_time and *_set_rtc_time functions take
a struct rtc_time; irq_canonicalize is gone; nvram_sync returns
void.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-19 23:11:21 +10:00
Paul Mackerras
46aab8c584 Merge rsync://oak/kernels/iseries/work/ 2005-10-18 14:53:41 +10:00
Stephen Rothwell
b09a4913b1 powerpc: change sys32_ to compat_sys_
This allows us to get rid of one type of entry in systbl.S.

In passing we remove the duplicate compat_sys_getdents and
compat_sys_utimes for which there are generic versions.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-18 14:51:57 +10:00
Paul Mackerras
77f543cb46 powerpc: Fix various compile errors with ARCH=ppc, ppc64 and powerpc
This makes ppc use the syscalls.c from arch/powerpc/kernel, exports
copy_and_flush from head_32.S for use by prom_init.c (ARCH=powerpc),
and consolidates the sys_fadvise64_64 implementations for 32-bit.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-18 14:19:41 +10:00
Stephen Rothwell
81e7009ea4 powerpc: merge ppc signal.c and ppc64 signal32.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-18 11:17:58 +10:00
Paul Mackerras
30286ef6e0 powerpc: Merge syscalls.c and sys_ppc32.c.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-17 20:10:13 +10:00
Stephen Rothwell
426c1a11a6 powerpc: move iSeries/iSeries_pci.h to platforms/iseries
The only real user of this file outside platforms/iseries was
drivers/net/iseries_veth.c but all it wanted was ISERIES_HV_ADDR()
so we move that to abs_addr.h (and lowercase it).

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-14 14:51:42 +10:00
Stephen Rothwell
e8a30302ab powerpc: merge ptrace.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 15:52:04 +10:00
Stephen Rothwell
eec5ef9098 ppc64: use powerpc of_device.c
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 15:16:25 +10:00
Stephen Rothwell
ae2752050d ppc64: fix arch/ppc64/kernel/Makefile
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 14:12:25 +10:00
Stephen Rothwell
d4bf9a7858 ppc64: merge binfmt_elf32.c
and use start_thread for both 32 and 64 bit bineries.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 13:40:54 +10:00
Stephen Rothwell
4920960f57 powerpc: consolidate cputable.c
Also simplify arch/ppc64/kernel/Makefile

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-13 09:49:45 +10:00
Paul Mackerras
b6ec995a21 Merge from Linus' tree 2005-10-12 14:43:32 +10:00
Peter Bergner
9149ccfa35 [PATCH] ppc64: Add R_PPC64_TOC16 module reloc
Newer gcc's are generating this relocation, so the module loader needs to
handle it.

Signed-off-by: Peter Bergner <bergner@vnet.ibm.com>
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:54 -07:00
Anton Blanchard
e4314bf496 [PATCH] ppc64: Fix PCI hotplug
pSeries_irq_bus_setup is marked __devinit but references s7a_workaround
which is marked __initdata.

Depending on who got the memory for s7a_workaround (and if the value was
now positive), it was possible for PCI hotplugged devices to have 3
subtracted from their interrupt number.  This would happen randomly and
caused me much confusion :)

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-11 09:46:53 -07:00
Paul Mackerras
f696012330 ppc64: compile fix - define execve in misc.S
This used to be inline in include/asm-ppc64/unistd.h, but isn't
inline in the merged include/asm-powerpc/unistd.h, so we need a
definition here.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:10:49 +10:00
Paul Mackerras
3abec857a0 ppc64: Use merged versions of init_task.c and process.c.
These two files are now built in arch/powerpc/kernel instead of
arch/ppc64/kernel.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-11 22:09:48 +10:00
Paul Mackerras
40ef8cbc6d powerpc: Get 64-bit configs to compile with ARCH=powerpc
This is a bunch of mostly small fixes that are needed to get
ARCH=powerpc to compile for 64-bit.  This adds setup_64.c from
arch/ppc64/kernel/setup.c and locks.c from arch/ppc64/lib/locks.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:50:37 +10:00
Paul Mackerras
bc6f8a4b19 powerpc: move lparmap.c to arch/powerpc/kernel
Since lparmap.s gets included in arch/powerpc/kernel/head_64.S,
this avoids depending on a file in another directory.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:45:07 +10:00
Paul Mackerras
4a2885630b powerpc: Reduce the 32/64-bit diffs in vmlinux.lds.S
Also adds the definition of the _sdata symbol to the ppc64 vmlinux.lds.S.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:38:46 +10:00
Paul Mackerras
c17e3325ba ppc64: Use SPRN_ prefix for special purpose register names
Now that we are using the merged reg.h we have to use the SPRN_xxx
names rather than the xxx names.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:07:35 +10:00
Paul Mackerras
69a80d3f69 powerpc: move pSeries files to arch/powerpc/platforms/pseries
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 22:03:41 +10:00
Paul Mackerras
ab1f9dac6e powerpc: Merge arch/ppc64/mm to arch/powerpc/mm
This moves the remaining files in arch/ppc64/mm to arch/powerpc/mm,
and arranges that we use them when compiling with ARCH=ppc64.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 21:58:35 +10:00
Paul Mackerras
a432403a89 ppc64: Use the merged lmb routines
The only real change here is that lmb_enforce_memory_limit now takes
the memory_limit as a parameter instead of as a global variable.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 20:49:07 +10:00
Paul Mackerras
b60fc8bbd2 powerpc: Make some #includes explicit.
In preparation for merging processor.h, this adds some explicit
but won't be after the merge.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:14:55 +10:00
Paul Mackerras
b5bbeb2373 powerpc: Use SPRN_xxx rather than xxx for SPR numbers
This changes symbols like HID0, SPRG3, SRR0, SRR1 etc. that refer to
special purpose registers to SPRN_HID0, SPRN_SPRG3, etc.  Using the
SPRN_ symbols clutters the namespace less, and the forthcoming merge
of asm/processor.h and asm/reg.h is going to remove the non-SPRN_
versions.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-10 14:01:07 +10:00
Al Viro
dd0fc66fb3 [PATCH] gfp flags annotations - part 1
- added typedef unsigned int __nocast gfp_t;

 - replaced __nocast uses for gfp flags with gfp_t - it gives exactly
   the same warnings as far as sparse is concerned, doesn't change
   generated code (from gcc point of view we replaced unsigned int with
   typedef) and documents what's going on far better.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-08 15:00:57 -07:00
Ananth N Mavinakayanahalli
2d8ab6ad6e [PATCH] ppc64: fix up()/down() usage for kprobe_mutex
The incorrect kprobe_mutex usage on x86_64 had percolated to ppc64 too.
First noticed by Yanmin Zhang.

Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-01 10:54:47 -07:00
Stephen Rothwell
cabb558714 powerpc: make iSeries build
Merge vmlinux.lds.S.
Also remove arch/powerpc/kernel/vmlinux.lds which is a
generated file.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 18:52:10 +10:00
Stephen Rothwell
bd142b70a6 ppc64: simplify the build a little
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 18:51:12 +10:00
Stephen Rothwell
dc1c1ca3dc powerpc: merge idle_power4.S and trapc.s
Use idle_power4.S from ppc64 as we are not going to support
32 bit power4 in the merged tree.

Merge ppc64 traps.c into powerpc traps.c:
	use ppc64 versions of exception routine names
		(as they don't have StudlyCaps)
	make all the versions if die() have the same
		prototype

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-10-01 18:43:42 +10:00
Al Viro
c215a16a4a [PATCH] bogus BUILD_BUG_ON() in bpa_iommu
BUILD_BUG_ON(1) is asking for trouble (and getting it) when used in that
manner - dead code elimination happens after we parse it and invalid
type is invalid type, dead code or not.

It might be version-dependent, but at least 4.0.1 refuses to accept
that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-30 08:42:24 -07:00
Stephen Rothwell
d96024c688 powerpc: Move lparmap.c to powerpc/platforms
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30 18:04:10 +10:00
Stephen Rothwell
dcff1b170b powerpc: remove old vector.S files
Update old kernel/Makefiles to cope

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-30 18:04:03 +10:00
Paul Mackerras
ab11d1ea28 Merge by hand from Linus' tree.
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-29 13:13:36 +10:00
Benjamin Herrenschmidt
0f9578b70a [PATCH] ppc64: More hugepage fixes
My previous patch fixing invalidation of huge PTEs wasn't good enough, we
still had an issue if a PTE invalidation batch contained both small and
large pages.  This patch fixes this by making sure the batch is flushed if
the page size fed to it changes.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:42 -07:00
Anton Blanchard
b3ca809351 [PATCH] ppc64: Add missing barrier() in kexec code
Mikey and I were testing kexec and hit a lockup.  It turns out gcc 4.0
optimises the kexec_prepare_cpus loop so we avoid reloading paca.hw_cpu_id.
 A gcc barrier() fixes the problem.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-28 07:46:41 -07:00
Paul Mackerras
952ecef7a0 Merge Stephen Rothwell's patches 2005-09-28 21:11:41 +10:00
Kumar Gala
10b35d9978 [PATCH] powerpc: merged asm/cputable.h
Merged cputable.h between ppc32 and ppc64.  In doing this removed support
for the BEGIN_FTR_SECTION/END_FTR_SECTION macros in C code since they
dont compile correctly.  C code should use cpu_has_feature().  This is
based on Arnd Bergmann's initial patch.

Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28 15:42:53 +10:00
Stephen Rothwell
252e75a51d ppc64 iSeries: use device_node instead of iSeries_Device_node
There needs to be more cleanup after this.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 14:40:40 +10:00
Stephen Rothwell
c111d0bda8 powerpc: move more iSeries code
Move the iSeries specific parts of misc.S and ppc_ksyms.c
into powerpc/platforms/iseries.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 13:28:01 +10:00
Stephen Rothwell
d223e721b7 powerpc: Move viopath.c to powerpc/platforms/iseries
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 03:12:35 +10:00
Stephen Rothwell
b6b8681843 powerpc: Move iSeries_smp.c to powerpc/platforms/iseries
And rename it to smp.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 03:07:14 +10:00
Stephen Rothwell
ed7f2c05de powerpc: Move iSeries_vio.c to powerpc/platforms/iseries
And rename it to vio.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 03:03:00 +10:00
Stephen Rothwell
da3420fcd6 powerpc: Move iSeries_VpdInfo.c to powerpc/platforms/iseries
And rename it to vpdinfo.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 02:59:19 +10:00
Stephen Rothwell
cb4cf8056e powerpc: Move iSeries_irq.c to powerpc/platorms/iseries
And rename it to irq.c.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 02:54:39 +10:00
Stephen Rothwell
d387899f3f powerpc: Move iSeries_pci.c to powerpc/platform/iseries
and rename it to pci.c.  This also required moving
arch/ppc64/kernel/pci.h into include/asm-powerpc (called
ppc-pci.h.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 02:50:25 +10:00
Stephen Rothwell
cc14d43083 powerpc: Move iSeries_iommu.c to powerpc/platforms/iseries
And rename it to iommu.c

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2005-09-28 02:32:16 +10:00