Commit Graph

244 Commits

Author SHA1 Message Date
Benjamin Herrenschmidt
4393c4f678 [POWERPC] Make alignment exception always check exception table
The alignment exception used to only check the exception table for
-EFAULT, not for other errors. That opens an oops window if we can
coerce the kernel into getting an alignment exception for other reasons
in what would normally be a user-protected accessor, which can be done
via some of the futex ops. This fixes it by always checking the
exception tables.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01 15:16:04 +11:00
Andrew Morton
61ce1efe6e [PATCH] vmlinux.lds: consolidate initcall sections
Add a vmlinux.lds.h helper macro for defining the eight-level initcall table,
teach all the architectures to use it.

This is a prerequisite for a patch which performs initcall synchronisation for
multithreaded-probing.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
[ Added AVR32 as well ]
Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-27 15:34:51 -07:00
Benjamin Herrenschmidt
0909c8c2d5 [POWERPC] Support feature fixups in vdso's
This patch reworks the feature fixup mecanism so vdso's can be fixed up.
The main issue was that the construct:

        .long   label  (or .llong on 64 bits)

will not work in the case of a shared library like the vdso. It will
generate an empty placeholder in the fixup table along with a reloc,
which is not something we can deal with in the vdso.

The idea here (thanks Alan Modra !) is to instead use something like:

1:
        .long   label - 1b

That is, the feature fixup tables no longer contain addresses of bits of
code to patch, but offsets of such code from the fixup table entry
itself. That is properly resolved by ld when building the .so's. I've
modified the fixup mecanism generically to use that method for the rest
of the kernel as well.

Another trick is that the 32 bits vDSO included in the 64 bits kernel
need to have a table in the 64 bits format. However, gas does not
support 32 bits code with a statement of the form:

        .llong  label - 1b  (Or even just .llong label)

That is, it cannot emit the right fixup/relocation for the linker to use
to assign a 32 bits address to an .llong field. Thus, in the specific
case of the 32 bits vdso built as part of the 64 bits kernel, we are
using a modified macro that generates:

        .long   0xffffffff
        .llong  label - 1b

Note that is assumes that the value is negative which is enforced by
the .lds (those offsets are always negative as the .text is always
before the fixup table and gas doesn't support emiting the reloc the
other way around).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 11:54:07 +10:00
Benjamin Herrenschmidt
42c4aaadb7 [POWERPC] Consolidate feature fixup code
There are currently two versions of the functions for applying the
feature fixups, one for CPU features and one for firmware features. In
addition, they are both in assembly and with separate implementations
for 32 and 64 bits. identify_cpu() is also implemented in assembly and
separately for 32 and 64 bits.

This patch replaces them with a pair of C functions. The call sites are
slightly moved on ppc64 as well to be called from C instead of from
assembly, though it's a very small change, and thus shouldn't cause any
problem.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-25 11:42:10 +10:00
Kumar Gala
7d2bd30f67 [POWERPC] ppc: Add missing calls to set_irq_regs
In the timer_interrupt we were not calling set_irq_regs() and if we are
profiling we will end up calling get_irq_regs().  This causes bad things to
happen.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-16 15:52:14 +10:00
Al Viro
39e3eb7265 [POWERPC] ARCH=ppc pt_regs fixes
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-10 11:55:25 +10:00
Paul Mackerras
3211be5c6a [PPC] Fix some irq breakage with ARCH=ppc
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-10-06 21:09:40 +10:00
Arnd Bergmann
fe74290d51 [PATCH] provide kernel_execve on all architectures
This adds the new kernel_execve function on all architectures that were using
_syscall3() to implement execve.

The implementation uses code from the _syscall3 macros provided in the
unistd.h header file.  I don't have cross-compilers for any of these
architectures, so the patch is untested with the exception of i386.

Most architectures can probably implement this in a nicer way in assembly or
by combining it with the sys_execve implementation itself, but this should do
it for now.

[bunk@stusta.de: m68knommu build fix]
[markh@osdl.org: build fix]
[bero@arklinux.org: build fix]
[ralf@linux-mips.org: mips fix]
[schwidefsky@de.ibm.com: s390 fix]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bernhard Rosenkraenzer <bero@arklinux.org>
Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 07:57:23 -07:00
Atsushi Nemoto
8ef386092d [PATCH] kill wall_jiffies
With 2.6.18-rc4-mm2, now wall_jiffies will always be the same as jiffies.
So we can kill wall_jiffies completely.

This is just a cleanup and logically should not change any real behavior
except for one thing: RTC updating code in (old) ppc and xtensa use a
condition "jiffies - wall_jiffies == 1".  This condition is never met so I
suppose it is just a bug.  I just remove that condition only instead of
kill the whole "if" block.

[heiko.carstens@de.ibm.com: s390 build fix and cleanup]
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:27 -07:00
Olaf Hering
fb48388337 [PATCH] remove SYSRQ_KEY and related defines from ppc/sh/h8300
Remove unused global SYSRQ_KEY from ppc and powerpc
Remove unused define SYSRQ_KEY from sh/sh64 and h8300
Remove unused pckbd_sysrq_xlate and kbd_sysrq_xlate usage

Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-01 00:39:22 -07:00
Atsushi Nemoto
3171a0305d [PATCH] simplify update_times (avoid jiffies/jiffies_64 aliasing problem)
Pass ticks to do_timer() and update_times(), and adjust x86_64 and s390
timer interrupt handler with this change.

Currently update_times() calculates ticks by "jiffies - wall_jiffies", but
callers of do_timer() should know how many ticks to update.  Passing ticks
get rid of this redundant calculation.  Also there are another redundancy
pointed out by Martin Schwidefsky.

This cleanup make a barrier added by
5aee405c66 needless.  So this patch removes
it.

As a bonus, this cleanup make wall_jiffies can be removed easily, since now
wall_jiffies is always synced with jiffies.  (This patch does not really
remove wall_jiffies.  It would be another cleanup patch)

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: john stultz <johnstul@us.ibm.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Cc: Mikael Starvik <starvik@axis.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Hirokazu Takata <takata.hirokazu@renesas.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp>
Cc: Richard Curnow <rc@rc0.org.uk>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp>
Cc: Chris Zankel <chris@zankel.net>
Acked-by: "Luck, Tony" <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Roman Zippel <zippel@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:15 -07:00
Sukadev Bhattiprolu
f400e198b2 [PATCH] pidspace: is_init()
This is an updated version of Eric Biederman's is_init() patch.
(http://lkml.org/lkml/2006/2/6/280).  It applies cleanly to 2.6.18-rc3 and
replaces a few more instances of ->pid == 1 with is_init().

Further, is_init() checks pid and thus removes dependency on Eric's other
patches for now.

Eric's original description:

	There are a lot of places in the kernel where we test for init
	because we give it special properties.  Most  significantly init
	must not die.  This results in code all over the kernel test
	->pid == 1.

	Introduce is_init to capture this case.

	With multiple pid spaces for all of the cases affected we are
	looking for only the first process on the system, not some other
	process that has pid == 1.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Cc: Serge Hallyn <serue@us.ibm.com>
Cc: Cedric Le Goater <clg@fr.ibm.com>
Cc: <lxc-devel@lists.sourceforge.net>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-29 09:18:12 -07:00
Stephen Rothwell
73ea9e1bcb [POWERPC] clean up ide io accessors
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-20 14:06:18 +10:00
Stephen Rothwell
661f1cdb8b [POWERPC] remove unused asm routines
_insw, _outsw, _insl amd _outsl are all unused, so remove them.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
2006-09-20 14:06:18 +10:00
Corey Minyard
477bcae4c2 [POWERPC] Make function of pm_power_off consistent with x86
Allow the pm_power_off function variable in PPC to work as an override.
This makes the function consistent with the other architectures and it
allows generic poweroff operations (like those provided in IPMI
systems) to work properly on PPC.

Signed-off-by: Corey Minyard <minyard@acm.org>
Cc: Joseph Barnett <jbarnett@motorola.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-09-13 18:39:52 +10:00
Paul Mackerras
467c37801c [POWERPC] Fix irq enable/disable in smp_generic_take_timebase
Eran Ben-Avi <eranpublic@yahoo.com> pointed out that the arch/ppc version
of smp_generic_take_timebase disables interrupts on entry but exits without
restoring them.  However, both it and the arch/powerpc version have another
problem, which is that they use local_irq_disable/enable rather than
local_irq_save/restore, and they are called with interrupts disabled.

This fixes both problems; it changes a return to a break in the arch/ppc
version, and changes both versions to use local_irq_save/restore.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-08-30 16:10:47 +10:00
Roland McGrath
0b0bf7a3cc [PATCH] vDSO hash-style fix
The latest toolchains can produce a new ELF section in DSOs and
dynamically-linked executables.  The new section ".gnu.hash" replaces
".hash", and allows for more efficient runtime symbol lookups by the
dynamic linker.  The new ld option --hash-style={sysv|gnu|both} controls
whether to produce the old ".hash", the new ".gnu.hash", or both.  In some
new systems such as Fedora Core 6, gcc by default passes --hash-style=gnu
to the linker, so that a standard invocation of "gcc -shared" results in
producing a DSO with only ".gnu.hash".  The new ".gnu.hash" sections need
to be dealt with the same way as ".hash" sections in all respects; only the
dynamic linker cares about their contents.  To work with older dynamic
linkers (i.e.  preexisting releases of glibc), a binary must have the old
".hash" section.  The --hash-style=both option produces binaries that a new
dynamic linker can use more efficiently, but an old dynamic linker can
still handle.

The new section runs afoul of the custom linker scripts used to build vDSO
images for the kernel.  On ia64, the failure mode for this is a boot-time
panic because the vDSO's PT_IA_64_UNWIND segment winds up ill-formed.

This patch addresses the problem in two ways.

First, it mentions ".gnu.hash" in all the linker scripts alongside ".hash".
 This produces correct vDSO images with --hash-style=sysv (or old tools),
with --hash-style=gnu, or with --hash-style=both.

Second, it passes the --hash-style=sysv option when building the vDSO
images, so that ".gnu.hash" is not actually produced.  This is the most
conservative choice for compatibility with any old userland.  There is some
concern that some ancient glibc builds (though not any known old production
system) might choke on --hash-style=both binaries.  The optimizations
provided by the new style of hash section do not really matter for a DSO
with a tiny number of symbols, as the vDSO has.  If someone wants to use
=gnu or =both for their vDSO builds and worry less about that
compatibility, just change the option and the linker script changes will
make any choice work fine.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-31 13:28:43 -07:00
Jon Smirl
894673ee61 [PATCH] tty: Remove include of screen_info.h from tty.h
screen_info.h doesn't have anything to do with the tty layer and shouldn't be
included by tty.h.  This patches removes the include and modifies all users to
directly include screen_info.h.  struct screen_info is mainly used to
communicate with the console drivers in drivers/video/console.  Note that this
patch touches every arch and I have no way of testing it.  If there is a
mistake the worst thing that will happen is a compile error.

[akpm@osdl.org: fix arm build]
[akpm@osdl.org: fix alpha build]
Signed-off-by: Jon Smirl <jonsmir@gmail.com>
Signed-off-by: Antonino Daplas <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10 13:24:16 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
Linus Torvalds
1903ac54f8 Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6:
  [PATCH] i386: export memory more than 4G through /proc/iomem
  [PATCH] 64bit Resource: finally enable 64bit resource sizes
  [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed
  [PATCH] 64bit resource: change pnp core to use resource_size_t
  [PATCH] 64bit resource: change pci core and arch code to use resource_size_t
  [PATCH] 64bit resource: change resource core to use resource_size_t
  [PATCH] 64bit resource: introduce resource_size_t for the start and end of struct resource
  [PATCH] 64bit resource: fix up printks for resources in misc drivers
  [PATCH] 64bit resource: fix up printks for resources in arch and core code
  [PATCH] 64bit resource: fix up printks for resources in pcmcia drivers
  [PATCH] 64bit resource: fix up printks for resources in video drivers
  [PATCH] 64bit resource: fix up printks for resources in ide drivers
  [PATCH] 64bit resource: fix up printks for resources in mtd drivers
  [PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers
  [PATCH] 64bit resource: fix up printks for resources in networks drivers
  [PATCH] 64bit resource: fix up printks for resources in sound drivers
  [PATCH] 64bit resource: C99 changes for struct resource declarations

Fixed up trivial conflict in drivers/ide/pci/cmd64x.c (the printk that
was changed by the 64-bit resources had been deleted in the meantime ;)
2006-06-29 10:49:17 -07:00
KAMEZAWA Hiroyuki
76b67ed9dc [PATCH] node hotplug: register cpu: remove node struct
With Goto-san's patch, we can add new pgdat/node at runtime.  I'm now
considering node-hot-add with cpu + memory on ACPI.

I found acpi container, which describes node, could evaluate cpu before
memory. This means cpu-hot-add occurs before memory hot add.

In most part, cpu-hot-add doesn't depend on node hot add.  But register_cpu(),
which creates symbolic link from node to cpu, requires that node should be
onlined before register_cpu().  When a node is onlined, its pgdat should be
there.

This patch-set holds off creating symbolic link from node to cpu
until node is onlined.

This removes node arguments from register_cpu().

Now, register_cpu() requires 'struct node' as its argument.  But the array of
struct node is now unified in driver/base/node.c now (By Goto's node hotplug
patch).  We can get struct node in generic way.  So, this argument is not
necessary now.

This patch also guarantees add cpu under node only when node is onlined.  It
is necessary for node-hot-add vs.  cpu-hot-add patch following this.

Moreover, register_cpu calculates cpu->node_id by cpu_to_node() without regard
to its 'struct node *root' argument.  This patch removes it.

Also modify callers of register_cpu()/unregister_cpu, whose args are changed
by register-cpu-remove-node-struct patch.

[Brice.Goglin@ens-lyon.org: fix it]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Dave Hansen <haveblue@us.ibm.com>
Signed-off-by: Brice Goglin <Brice.Goglin@ens-lyon.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-27 17:32:37 -07:00
Greg Kroah-Hartman
e31dd6e452 [PATCH] 64bit resource: change pci core and arch code to use resource_size_t
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com>

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:24:00 -07:00
Greg Kroah-Hartman
685143ac1f [PATCH] 64bit resource: fix up printks for resources in arch and core code
This is needed if we wish to change the size of the resource structures.

Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> and
Andrew Morton.

(tweaked by Andy Isaacson <adi@hexapodia.org>)

Cc: Vivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Andy Isaacson <adi@hexapodia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27 09:23:59 -07:00
Tobias Klauser
2efe55a9ce Storage class should be first
Storage class should be before const

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-26 18:57:34 +02:00
Christoph Lameter
68402ddc67 [PATCH] mm: remove VM_LOCKED before remap_pfn_range and drop VM_SHM
Remove VM_LOCKED before remap_pfn range from device drivers and get rid of
VM_SHM.

remap_pfn_range() already sets VM_IO.  There is no need to set VM_SHM since
it does nothing.  VM_LOCKED is of no use since the remap_pfn_range does not
place pages on the LRU.  The pages are therefore never subject to swap
anyways.  Remove all the vm_flags settings before calling remap_pfn_range.

After removing all the vm_flag settings no use of VM_SHM is left.  Drop it.

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-25 10:00:55 -07:00
Paul Mackerras
b82e8005af ppc: Fix typo in TI_LOCAL_FLAGS definition
A typo crept in with commit ea1e847cc2
which defined TI_LOCAL_FLAGS to be the offset of the `flags' field
of struct thread_info, rather than the `local_flags' field.  This
fixes it.  The typo was pointed out by Guennadi Liakhovetski.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-29 08:42:34 +10:00
Marcelo Tosatti
c51e078f82 [PATCH] ppc32/8xx: Fix r3 trashing due to 8MB TLB page instantiation
Instantiation of 8MB pages on the TLB cache for the kernel static
mapping trashes r3 register on !CONFIG_8xx_CPU6 configurations.
This ensures r3 gets saved and restored.

Signed-off-by: Marcelo Tosatti <marcelo@kvack.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-05-09 16:03:11 +10:00
Paul Mackerras
7c8ce71b09 Merge branch 'misc' of master.kernel.org:/pub/scm/linux/kernel/git/galak/powerpc into merge 2006-04-22 19:19:06 +10:00
Becky Bruce
ea1e847cc2 [PATCH] ppc: Fix powersave code on arch/ppc
Fix asm_offsets.c and entry.S to work with the new power save code.
Changes in arch/powerpc needed to exist in arch/ppc as well since the
idle code is shared by both ppc and powerpc..

Signed-off-by: Becky Bruce <becky.bruce@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-21 22:33:22 +10:00
Kumar Gala
34ddf733c4 powerpc/ppc: export strncasecmp
We have a strncasecmp so we might as well export it

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-04-02 16:01:58 -05:00
KAMEZAWA Hiroyuki
b848e0a07d [PATCH] for_each_possible_cpu: ppc
for_each_cpu() actually iterates across all possible CPUs.  We've had mistakes
in the past where people were using for_each_cpu() where they should have been
iterating across only online or present CPUs.  This is inefficient and
possibly buggy.

We're renaming for_each_cpu() to for_each_possible_cpu() to avoid this in the
future.

This patch replaces for_each_cpu with for_each_possible_cpu.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-29 13:44:16 +11:00
Paul Mackerras
bac30d1a78 Merge ../linux-2.6 2006-03-29 13:24:50 +11:00
Arjan van de Ven
99ac48f54a [PATCH] mark f_ops const in the inode
Mark the f_ops members of inodes as const, as well as fix the
ripple-through this causes by places that copy this f_ops and then "do
stuff" with it.

Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 09:16:05 -08:00
Paul Mackerras
0a26b1364f ppc: Remove CHRP, POWER3 and POWER4 support from arch/ppc
32-bit CHRP machines are now supported only in arch/powerpc, as are
all 64-bit PowerPC processors.  This means that we don't use
Open Firmware on any platform in arch/ppc any more.

This makes PReP support a single-platform option like every other
platform support option in arch/ppc now, thus CONFIG_PPC_MULTIPLATFORM
is gone from arch/ppc.  CONFIG_PPC_PREP is the option that selects
PReP support and is generally what has replaced
CONFIG_PPC_MULTIPLATFORM within arch/ppc.

_machine is all but dead now, being #defined to 0.

Updated Makefiles, comments and Kconfig options generally to reflect
these changes.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-28 10:22:10 +11:00
Paul Mackerras
d0cc0dfa2d ppc: Remove duplicate exports of __down, __up etc.
__down, __down_interruptible and __up are defined and exported in
arch/powerpc/kernel/semaphore.c, and used from there for ARCH=ppc,
so there is no need to export them in arch/ppc/kernel/ppc_ksyms.c.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 20:31:44 +11:00
Paul Mackerras
e7e2d2da26 powerpc: Don't compile in arch/ppc/kernel for 32-bit ARCH=powerpc
All of the things needed for 32-bit ARCH=powerpc builds have now
moved to arch/powerpc/kernel, so we don't need to go down into
arch/ppc/kernel any more, and we can remove the CONFIG_PPC_MERGE
conditional from arch/ppc/kernel/Makefile.

There were two files still referenced in the merge section of
arch/ppc/kernel/Makefile: ppc-stub.o, depending on CONFIG_KGDB,
and dma-mapping.o, depending on CONFIG_NOT_COHERENT_CACHE.  None
of the platforms currently in ARCH=powerpc have caches that
aren't coherent with DMA, but when we do get one we'll move
dma-mapping.c over.  As for CONFIG_KGDB, none of the Kconfig
files in the tree define it, so I'll let it languish for now.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 20:17:06 +11:00
Paul Mackerras
8b844dd759 powerpc: Move perfmon_fsl_booke.c over to arch/powerpc
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 20:09:04 +11:00
Paul Mackerras
ed981856ca powerpc: Move module.c over to arch/powerpc
... and rename it to module_32.c since it is the 32-bit version.
The 32-bit and 64-bit ABIs are sufficiently different that having
a merged version isn't really practical.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 19:28:58 +11:00
Paul Mackerras
45320bcbab powerpc: Move swsusp.S over to arch/powerpc
... and rename it to swsusp_32.S, since it's 32-bit only at this stage.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 19:21:46 +11:00
Paul Mackerras
9b781727fd powerpc: Move cpu_setup_6xx.S and temp.c over to arch/powerpc
Also renamed temp.c to tau_6xx.c (for thermal assist unit) and updated
the Kconfig option description and help text for CONFIG_TAU.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 19:15:26 +11:00
Paul Mackerras
0eb4cb9b16 powerpc: Move l2cr.S over to arch/powerpc
No functional changes, but call it l2cr_6xx.S since it is specific
to 6xx-family (including G3/750 and G4/74xx) processors.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 15:22:28 +11:00
Paul Mackerras
a0652fc9a2 powerpc: Unify the 32 and 64 bit idle loops
This unifies the 32-bit (ARCH=ppc and ARCH=powerpc) and 64-bit idle
loops.  It brings over the concept of having a ppc_md.power_save
function from 32-bit to ARCH=powerpc, which lets us get rid of
native_idle().  With this we will also be able to simplify the idle
handling for pSeries and cell.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-27 15:03:03 +11:00
Andrew Morton
394e3902c5 [PATCH] more for_each_cpu() conversions
When we stop allocating percpu memory for not-possible CPUs we must not touch
the percpu data for not-possible CPUs at all.  The correct way of doing this
is to test cpu_possible() or to use for_each_cpu().

This patch is a kernel-wide sweep of all instances of NR_CPUS.  I found very
few instances of this bug, if any.  But the patch converts lots of open-coded
test to use the preferred helper macros.

Cc: Mikael Starvik <starvik@axis.com>
Cc: David Howells <dhowells@redhat.com>
Acked-by: Kyle McMartin <kyle@parisc-linux.org>
Cc: Anton Blanchard <anton@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: William Lee Irwin III <wli@holomorphy.com>
Cc: Andi Kleen <ak@muc.de>
Cc: Christian Zankel <chris@zankel.net>
Cc: Philippe Elie <phil.el@wanadoo.fr>
Cc: Nathan Scott <nathans@sgi.com>
Cc: Jens Axboe <axboe@suse.de>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-23 07:38:17 -08:00
Linus Torvalds
2e6e33bab6 Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
* git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: (78 commits)
  [PATCH] powerpc: Add FSL SEC node to documentation
  [PATCH] macintosh: tidy-up driver_register() return values
  [PATCH] powerpc: tidy-up of_register_driver()/driver_register() return values
  [PATCH] powerpc: via-pmu warning fix
  [PATCH] macintosh: cleanup the use of i2c headers
  [PATCH] powerpc: dont allow old RTC to be selected
  [PATCH] powerpc: make powerbook_sleep_grackle static
  [PATCH] powerpc: Fix warning in add_memory
  [PATCH] powerpc: update mailing list addresses
  [PATCH] powerpc: Remove calculation of io hole
  [PATCH] powerpc: iseries: Add bootargs to /chosen
  [PATCH] powerpc: iseries: Add /system-id, /model and /compatible
  [PATCH] powerpc: Add strne2a() to convert a string from EBCDIC to ASCII
  [PATCH] powerpc: iseries: Make more stuff static in platforms/iseries/mf.c
  [PATCH] powerpc: iseries: Remove pointless iSeries_(restart|power_off|halt)
  [PATCH] powerpc: iseries: mf related cleanups
  [PATCH] powerpc: Replace platform_is_lpar() with a firmware feature
  [PATCH] powerpc: trivial: Cleanup whitespace in cputable.h
  [PATCH] powerpc: Remove unused iommu_off logic from pSeries_init_early()
  [PATCH] powerpc: Unconfuse htab_bolt_mapping() callers
  ...
2006-03-22 22:20:46 -08:00
Nick Piggin
8dfcc9ba27 [PATCH] mm: split highorder pages
Have an explicit mm call to split higher order pages into individual pages.
 Should help to avoid bugs and be more explicit about the code's intention.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: David Howells <dhowells@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Zankel <chris@zankel.net>
Signed-off-by: Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-22 07:53:57 -08:00
Eric Sesterhenn
d116fe5aea [PATCH] kzalloc() conversion in arch/ppc
This converts arch/ppc to kzalloc usage.
Crosscompile tested with allyesconfig.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-17 13:20:57 +11:00
Paul Mackerras
5164501794 Merge ../linux-2.6 2006-03-09 14:32:05 +11:00
Paul Mackerras
1bd79336a4 powerpc: Fix various syscall/signal/swapcontext bugs
A careful reading of the recent changes to the system call entry/exit
paths revealed several problems, plus some things that could be
simplified and improved:

* 32-bit wasn't testing the _TIF_NOERROR bit in the syscall fast exit
  path, so it was only doing anything with it once it saw some other
  bit being set.  In other words, the noerror behaviour would apply to
  the next system call where we had to reschedule or deliver a signal,
  which is not necessarily the current system call.

* 32-bit wasn't doing the call to ptrace_notify in the syscall exit
  path when the _TIF_SINGLESTEP bit was set.

* _TIF_RESTOREALL was in both _TIF_USER_WORK_MASK and
  _TIF_PERSYSCALL_MASK, which is odd since _TIF_RESTOREALL is only set
  by system calls.  I took it out of _TIF_USER_WORK_MASK.

* On 64-bit, _TIF_RESTOREALL wasn't causing the non-volatile registers
  to be restored (unless perhaps a signal was delivered or the syscall
  was traced or single-stepped).  Thus the non-volatile registers
  weren't restored on exit from a signal handler.  We probably got
  away with it mostly because signal handlers written in C wouldn't
  alter the non-volatile registers.

* On 32-bit I simplified the code and made it more like 64-bit by
  making the syscall exit path jump to ret_from_except to handle
  preemption and signal delivery.

* 32-bit was calling do_signal unnecessarily when _TIF_RESTOREALL was
  set - but I think because of that 32-bit was actually restoring the
  non-volatile registers on exit from a signal handler.

* I changed the order of enabling interrupts and saving the
  non-volatile registers before calling do_syscall_trace_leave; now we
  enable interrupts first.

Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-08 13:24:22 +11:00
Paul Mackerras
a00428f5b1 Merge ../powerpc-merge 2006-02-24 14:05:47 +11:00
Alan Curry
f1434a4854 [PATCH] powerpc: fix altivec_unavailable_exception Oopses
altivec_unavailable_exception is called without setting r3... it looks like
the r3 that actually gets passed in as struct pt_regs *regs is the
undisturbed value of r3 at the time the altivec instruction was encountered.
The user actually gets to choose the pt_regs printed in the Oops!

This fixes the oops by passing the correct pt_regs pointer to
altivec_unavailable_exception.

Signed-off-by: Alan Curry <pacman@TheWorld.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-02-24 11:36:23 +11:00