Add Genoa specific default target configurations for
offload configs, max tx pattern config and max sta
vdev config
Change-Id: Id682b1103d87021e207de335721805515db6a932
CRs-Fixed: 2258999
Currently network buffer map/unmap tracking is enabled by the
MEMORY_DEBUG compile time flag.
I6b62539d39664db3ff62411fe8632633f53488c8 is giving this feature its own
compile time flag, NBUF_MAP_UNMAP_DEBUG. When CONFIG_LEAK_DETECTION is
enabled, also enable NBUF_MAP_UNMAP_DEBUG to retain current behavior.
Change-Id: I9d18ff8401710e3964cb6decb01ac1a282421d37
CRs-Fixed: 2273769
Enable features for genoa, create new file genoa.common
where we added list of common features and then include
this common file in all other genoa defconfig variants.
Change-Id: I50a1f4f95a96ce2e489002131b5cc9215c17a0ae
CRs-Fixed: 2272740
Enable the converged configuration component in the Kbuild. Also, hook
into the cfg parse and release APIs.
Change-Id: Id0df669a34463e9f51bd5cc5bf2939fb1ac6228d
CRs-Fixed: 2258233
1) Add perf,debug config files for Genoa USB attach
2) Changes to sdio config files for Genoa HL data path flags
CRs-Fixed: 2269442
Change-Id: I720d7d2aa2167380e06251eab51629bd64117272
The HDD Request Manager was replicated in the converged project as the
OSIF Request Manager so that the infrastructure could be used by the
converged code. Transition HDD to the OSIF Request Manager and remove
the now duplicated HDD Request Manager.
Change-Id: I2dfdd2da4f98e95a74ba13d04bb42d25a90c9ec8
CRs-Fixed: 2269909
Currently define flags CONFIG_PLD_SDIO_CNSS and
CONFIG_PLD_PCIE_CNSS are inferred by examining
two different configuration options in kbuild.
In order to configure it from defconfig files
create new configuration parameters
CONFIG_PLD_SDIO_CNSS_FLAG and
CONFIG_PLD_PCIE_CNSS_FLAG. Enable PCIE_CNSS_FLAG
only in case of PCIE build.
Change-Id: Ia1038f4aaf25f949005ec41c405232ec9981c988
CRs-Fixed: 2267172
Add the compilation flags for TWT feature to Kbuild.
Based on the compilation flag, include the source
files for compilation and also include the header
files path.
Change-Id: I45991b3c9e49e2aa0ff51a2650fde69ea447bf15
CRs-Fixed: 2238302
SDIO transfer between host and target can have multiple methods.
Legacy methods use the mailbox dma transfer method. Newer IP shall
use the adma transfer method.
Add build option for the transfer method.
Change-Id: Ibf2e20869d93f631db25008a95bdebf03875fcc0
CRs-Fixed: 2252432
File wlan_hdd_cfg80211.c is bloated and adding support for
upcoming Android Packet Filter v3 is going to increase its
size even more.
Create a new source file for APF related HDD modules and a
header file for declaring the API's.
Change-Id: I2fb3d7e017f4befbad7aacab3575ae2b48e88a45
CRs-Fixed: 2189825
Separate out QCA_LL_LEGACY_TX_FLOW_CONTROL
and QCA_LL_TX_FLOW_CONTROL_V2 flow control implementation
in different files to compile out features cleanly.
Change-Id: I5d6ddf9ea61b409b25d242852ed1f0102e94ad88
CRs-Fixed: 2228902
new INI gNumVdevs is added to allow number of VDEV support
for both Host and FW. Also Updated logic to calculate num_peers
and num_tids.
Change-Id: Ife5ff24e9594c8986913c06899ac5e41c83fc75c
CRs-Fixed: 2245506
Total 16 number of WoW filters are PoRed for Genoa.
Define CONFIG_PMO_WOW_FILTERS in genoa defconfigs with value 16.
Change-Id: Iba3d9875c954b32a3f22cfd639f4508beb36a5d5
CRs-Fixed: 2257033
Define separate configuration options for the various data path
debug features and use those options to set the associated
ccflags macros.
Change-Id: Ia410557bb9fa22731d83b46e61f394b14781d61f
CRs-Fixed: 2255915
Featurize fastpath feature cleanly and
also disable unused code when Fastpath
is enabled.
Change-Id: I3922af873ef32544fdca37be0b110ebbc2abc45a
CRs-Fixed: 2226918
Add spectral scan feature flag which can be
used to control the feature through build options.
Change-Id: Ide13e958cffff610626c891041307b40ac94c47d
CRs-Fixed: 2232167
For admission control feature, it is possible that priority of skb
to be overridden by HDD layer because certain AC is in the ACM
state. So need to enable ATH_TX_PRI_OVERRIDE by default.
This change will only take effect for QCA6290.
CRs-Fixed: 2237916
Change-Id: I9fcf75948c1b0eee8b12d5d54ab3dd251fb36409
Use get_wmi_unified_hdl_from_psoc instead of GET_WMI_HDL_FROM_PSOC due
to incompatible return types.
Solve renaming dependencies with common side changes.
Change-Id: Ie84641327d64876877c7d26b63d632c79770a88c
CRs-Fixed: 2203055
Add GRO support and make it configurable through INI(GROEnable).
GRO and LRO are mutually exclusive. Only one of them can be enabled.
And disable GRO during following conditions
1) Low TPUT scenario
2) Concurrency cases
3) For Rx packets when Peer is not connected
Change-Id: I15535827a03953231670d4138235c4876b16e045
CRs-Fixed: 2098772
Add feature flag for PMO component such that for high latency
and IoT devices power management and offload component can be
compiled out.
Change-Id: I562e2391d4691fe5587920696997275859857646
CRs-Fixed: 2227322
Change the path to pick up the latest v2 version of the
HW headers for Napier 11AX SoD
Change-Id: I0f8a504e3562fc8fb1a5c2d5f4529ca2c7ab9761
CRs-Fixed: 2188755
Move hdd_request_manager to qcacmn osif layer, which will be
used by CP_STATs component.
Change-Id: Iab64ebb837d7c2c7411905b84306fbb9990a4bac
CRs-Fixed: 2220069
A new data structure, qdf_flex_mem, was added to the common code repo.
Add qdf_flex_mem.o to the Kbuild.
Change-Id: If3ee8ad486578574d476d5ce77ce1ae9bb513d4e
CRs-Fixed: 2224551
Change "qcacld-3.0: Remove unused WLAN_FEATURE_RX_FULL_REORDER_OL
macro" (Change-Id I72e770874150cbac69e8efbb9e5dd7027a2e8869) removed
one reference to macro WLAN_FEATURE_RX_FULL_REORDER_OL but left one,
so now remove that one as well.
Change-Id: I64d4042b8f129cb6ef85057652cbf5c244891b8d
CRs-Fixed: 2226541
The refactored Kbuild has introduced build errors when the driver is
built using LLVM. The primary issue is that the pre-processing stage
introduces many checks that are not present when using GCC. To avoid
these issue include the conditional compilation macros in the
pre-processing stage.
Change-Id: I9b4a5b41523ae6e3055b4b9ae021322acade8a5f
CRs-Fixed: 2226196
The SoftAP VSTA feature was introduced to overcome a limitation in a
prior version of WLAN hardware. Since the WLAN hardware supported by
this driver does not have this limitation, remove the feature code.
Change-Id: I1f2fe31b294fb7b2da1fa8619b3380412c5d872e
CRs-Fixed: 2224817
Change "qcacmn: Propagate config parameters to datapath" (Change-Id
Icbdc835a51a6fea87c06174e9fc63d5d007aec1d in qca-wifi-host-cmn)
removed the only reference to macro WLAN_RX_HASH, so remove the macro
along with the controlling config item.
Change-Id: I2aab4184939f99b4966b2106ff4ca7666022ccbb
CRs-Fixed: 2224816
The driver supports a "SSR injection" feature that is used during
testing to validate certain recovery features. Currently this feature
is protected by a generic WLAN_DEBUG feature flag, and in addition
there are two separate debug ioctl handlers which have duplicate
code. In order to better support a finer level of configurability
introduce a new configuration flag and consolidate to a single
implementation of the feature under that flag.
Change-Id: I73e8dd4580ca53d129ae0181ffc46d011699f3dc
CRs-Fixed: 2224815
Change "qcacld-3.0: Remove obsolete PELOG* logging macros" (Change-Id
I018088db456871ed46c60957c4ef5d5af85d0457) removed some obsolete
macros. Now remove the Kbuild support that previously enabled those
macros.
Change-Id: Ie359440c725f614ea109fe95d90a43dd279ea8a9
CRs-Fixed: 2224814
Currently the switch -DWLAN_ENABLE_CHNL_MATRIX_RESTRICTION is inferred
by examining a seemingly unrelated configuration option. In order to
clearly separate setting the configuration from applying the
configuration create a new CONFIG_CHNL_MATRIX_RESTRICTION
configuration parameter.
Change-Id: I337d026ac0651e729d899058ee0e9d7e8256f018
CRs-Fixed: 2224813
Currently the switch -DCONFIG_TUFELLO_DUAL_FW_SUPPORT is inferred by
examining a seemingly unrelated configuration option. In order to
clearly separate setting the configuration from applying the
configuration create an explicit CONFIG_TUFELLO_DUAL_FW_SUPPORT
configuration parameter.
Change-Id: Id72259449c16aa81413c24a57cb1085110ff0223
CRs-Fixed: 2224812
Currently the switch -DCHANNEL_HOPPING_ALL_BANDS is inferred by
examining a seemingly unrelated configuration option. In order to
clearly separate setting the configuration from applying the
configuration create a new CONFIG_CHANNEL_HOPPING_ALL_BANDS
configuration parameter.
Change-Id: Icc9aef38445cdcd9269210b578b1e1be2fe18ac9
CRs-Fixed: 2224811
Currently the switch -DWLAN_LOGGING_SOCK_SVC_ENABLE is inferred by
examining a seemingly unrelated configuration option. In order to
clearly separate setting the configuration from applying the
configuration create a new CONFIG_WLAN_LOGGING_SOCK_SVC configuration
parameter.
Change-Id: Ic542512e3440453ef9f320297cf18f73f92fb2e3
CRs-Fixed: 2224810
Define a separate configuration option for legacy WiFi positioning and
use that option to set the associated ccflags macro.
Change-Id: I43cc04b3730687bf6298c66af7c42a9d6d9db80c
CRs-Fixed: 2224809
Define separate configuration options for the various Lithium
features and use those options to set the associated ccflags macros.
Change-Id: I08fee39c76963b102611b134346fe5edc95a0835
CRs-Fixed: 2224808
Define separate configuration options for the various Helium
features and use those options to set the associated ccflags macros.
Change-Id: Ia221aa3690ecbe37ac6568fa54876c77e338e2f6
CRs-Fixed: 2224807
Define separate configuration options for the various Adrastea
features and use those options to set the associated ccflags macros.
Change-Id: Ie418140dd21038ee3fd6eb3ecfd5d031bf1432ed
CRs-Fixed: 2224806
Define a separate configuration option for legacy TX flow control and
use that option to set the associated ccflags macro.
Change-Id: Id14ac79280d3bf809c1e85bde4d5c7037a3ea766
CRs-Fixed: 2224629
Currently there are many cases where ccflags-y is set by logic:
ifeq ($(CONFIG_FOO), y)
ccflags-y += -DENABLE_FOO
endif
In order to align with Linux style reduce such simple cases to:
ccflags-$(CONFIG_FOO) += -DENABLE_FOO
Change-Id: Ibe700701d25c3a2944fa2f2eabf528b04b59bbdd
CRs-Fixed: 2223862
In order to more closely comply with Linux look and feel replace the
temporary variable CDEFINES with direct use of ccflags-y.
Change-Id: I801e61644f583ea213c9d699b318d328ae4ba1c2
CRs-Fixed: 2223861
In preparation for fully file-driven configuration create config
items for (almost) all -D switches which are currently being set
unconditionally.
Change-Id: I067b13e11c9cdf3a0355c2e64ab3770088118afa
CRs-Fixed: 2223860
The driver contains considerable debris from the obsolete WOWL
messaging, so clean it up.
Change-Id: I432f7fc1567b0aa31a7be758c05f2213340baed0
CRs-Fixed: 2223859
Currently -DWLAN_FEATURE_GTK_OFFLOAD is being set twice, once
unconditionally and once based upon CONFIG_GTK_OFFLOAD. Since this is
properly featurized, remove the unconditional setting so that the
setting is correctly controlled by the configuration.
Change-Id: I6f820990dc48304f18f78ec59005c2188a677094
CRs-Fixed: 2223858
Currently -DWLAN_ENABLE_AGEIE_ON_SCAN_RESULTS is unconditionally added
to all builds. Since this feature may not be required for all targets,
create a CONFIG_AGEIE_ON_SCAN_RESULTS feature flag to enable this
feature.
Change-Id: Id5a82a85f4484ca710d4b309355fe3ee0d05883e
CRs-Fixed: 2223857
Currently Kbuild sets a HAVE_CFG80211 flag based upon whether or not
CONFIG_CFG80211 is configured. The presence of this flag implies that
cfg80211 is optional. However in reality this is a required module, so
remove the confusing flag and instead make the underlying code always
present.
Change-Id: Ia039968cad6f311091e09d4b82805c7bbc5b83f8
CRs-Fixed: 2223856
WMI non_tlv is not used for MCL targets and hence compile
out WMI non_tlv object file from Kbuild.
Change-Id: I0ee9376065dffb0f959ef8ba47435cc38a3d7d55
CRs-Fixed: 2216856
Currently the switch -DFEATURE_SKB_PRE_ALLOC is inferred by examining
three different configuration options. In order to clearly separate
setting the configuration from applying the configuration create a new
CONFIG_FEATURE_SKB_PRE_ALLOC configuration parameter.
Change-Id: I301031a03fdae394748cf4cb6259044324eec6f1
CRs-Fixed: 2222914
Currently the switch -DFEATURE_WLAN_D0WOW is inferred by examining two
different configuration options. In order to clearly separate setting
the configuration from applying the configuration create a new
CONFIG_FEATURE_WLAN_D0WOW configuration parameter.
Change-Id: Ie278011a309a18673eabb4bc4f8f8bb691815018
CRs-Fixed: 2222913
Currently the switch -DENABLE_SMMU_S1_TRANSLATION is inferred by
examining two different configuration options. In order to clearly
separate setting the configuration from applying the configuration
create a new CONFIG_ENABLE_SMMU_S1_TRANSLATION configuration
parameter.
Change-Id: Ibfa0cfbad5342895d90a32ddcf46a9d851253dcb
CRs-Fixed: 2222912
In Kbuild CONFIG_ROME_IF is used to calculate the interface used by
the WLAN hardware. Once this is determined, one of the boolean
CONFIG_HIF_[PCI|USB|SDIO|SNOC|...] variables is configured. In
anticipation of refactoring the Kbuild in a manner which will remove
the necessity of having CONFIG_ROME_IF, replace all tests of
CONFIG_ROME_IF with tests of CONFIG_HIF_* once the CONFIG_HIF_*
variables have been set.
Change-Id: If80d465500b6b99181d470fa6bff3dc8c20e4409
CRs-Fixed: 2222911
Currently WAPI support is being unconditionally enabled in the
driver. However support may not be required on all targets, so add a
configuration flag
Change-Id: I1344620d4cff38dc9d780c9a272d2de07a423e8d
CRs-Fixed: 2222910
Currently in Kbuild the "profile" variable CONFIG_MOBILE_ROUTER is
defined based upon a set of tests. Subsequently CDEFINES is updated
with specific feature flags based upon the CONFIG_MOBILE_ROUTER
value. In anticipation of refactoring profile information into
per-target configuration files, create a separate configuration
variable for each feature that is currently controlled by
CONFIG_MOBILE_ROUTER. This will allow each target to have fine-grain
control over its features.
Change-Id: I5fb78f8c49c9ea2b970e547049d565cc1e9243f0
CRs-Fixed: 2222151
CONFIG_CNSS_EOS is an obsolete configuration item so remove all
references to it.
Change-Id: Id26ac1fb6969af845730b57f1bef6a4903c2b71e
CRs-Fixed: 2222022
Currently if the driver is built directly within the kernel the
following Kconfig parameters will NOT be taken from the kernel
configuration:
- CONFIG_HELIUMPLUS
- CONFIG_64BIT_PADDR
- CONFIG_FEATURE_TSO
- CONFIG_FEATURE_TSO_DEBUG
Inversely, if the driver is built outside the kernel the following
parameter does not enforce the "depends on HELIUMPLUS" that is found
in the Kconfig:
- CONFIG_WLAN_LRO
Resolve these issues by relocating the HELIUMPLUS definition to inside
the "ifeq ($(KERNEL_BUILD), n)" portion of the Kbuild, and relocating
the other configurations such that they only get initialized when
HELIUMPLUS is enabled.
Change-Id: Ie41cd0a59bfa39fed39779e508bebbd6e29f6c0c
CRs-Fixed: 2222020
CONFIG_SUPPORT_HOST_STATISTICS is set but then never referenced, so
remove it from Kbuild.
Change-Id: Ib2ec5dfe1a1e10e04116b097296c5bacc6ece9cd
CRs-Fixed: 2221853
Currently Kbuild unconditionally sets -DHAL_SELF_STA_PER_BSS=1. There
is only one place where this macro is referenced, and it actually
requires that the macro be set for the driver to work. Since this
logic isn't really conditional, remove the conditional compilation.
Change-Id: I09a03339df086146b81b3012fb281e166fccd5da
CRs-Fixed: 2221852
Kbuild has conditional logic to set CONFIG_HIF_MESSAGE_BASED which is
subsequently used to pass -DHIF_MESSAGE_BASED to the driver. But
HIF_MESSAGE_BASED is not actually used by the driver, so remove this
support.
Change-Id: Id0650c2c44d7b20d58b30e405c2e8f4aa1082e99
CRs-Fixed: 2221851
Kbuild conditionally defines CONFIG_PRIMA_WLAN_11AC_HIGH_TP but then
never uses it. Since it is obsolete, remove it.
Change-Id: I4002197c3068c58e542ab0b7bcc55b642e04624c
CRs-Fixed: 2221850
In Kbuild, configuration variables are used to determine which files
are included in the build and what flags are given to the C compiler.
Currently most of the configuration variables are set in the top
portion of the file. In preparation for futher featurization identify
those configuration variables which are being set in the bottom
portion of the file, and relocate them to the top portion of the file.
Change-Id: I962edf666ba7ed8c37a28e448b8675249a759975
CRs-Fixed: 2220924
Fix the following issues in Kbuild:
- 'Managment' may be misspelled - perhaps 'Management'?
- 'Endianess' may be misspelled - perhaps 'Endianness'?
- Use of EXTRA_CFLAGS is deprecated, please use `ccflags-y instead.
Change-Id: Ie2d2940bbf5b143b2185bf88bc8fd33abb16817a
CRs-Fixed: 2220923
In the Kbuild most of the local flag variables use y/n but there are
some that use 0/1. For consistency change all 0/1 flags to y/n.
Change-Id: Ic436d7f1cf8a75eae9d3542b458094ed6442740d
CRs-Fixed: 2220922
Kbuild currently has conditional code that is used to set the macro
AH_BYTE_ORDER. But this macro is unused by the code, so remove it.
Change-Id: If694bdb492645eda5d314f7240e42677d9e4413d
CRs-Fixed: 2220921
There are a multitude of endian macros currently supported by the
driver. Consolidate them in one place as a precursor to future
consolidation.
Change-Id: Id4e57eb6e409aa0c84d46b8ce9eb85f3be56716e
CRs-Fixed: 2220920
Kbuild currently passes the macro SPECTRAL_USE_NETLINK_SOCKETS to the
compiler. However this macro is now obsolete, so remove it.
Change-Id: Id88028cceddcaaf8f35c708451fa5bf21c4695dd
CRs-Fixed: 2220919
Kbuild currently defines the macro WLAN_FEATURE_RX_FULL_REORDER_OL.
However the change "qcacld-3.0: wma: change legacy data path api to
cdp api" removed the only reference to this macro. Since it is now
obsolete, remove it.
Change-Id: I72e770874150cbac69e8efbb9e5dd7027a2e8869
CRs-Fixed: 2220918
The Kbuild currently defines the macro WLAN_FEATURE_MBSSID. However
this macro is not actually referenced in the driver, so remove it.
Change-Id: Id2254c298b5db2a18a75160d22904af3a6f90c06
CRs-Fixed: 2220916
Macro WLANTL_DEBUG is currently used to define some SAP debug
counters, but these counters are unused, so remove this obsolete code.
Change-Id: Ie7d976efcb5fb335b3f60a5af48a70dd214b3bd0
CRs-Fixed: 2220915
The Kbuild currently conditionally defines the macros WCN_PRONTO and
WCN_PRONTO_V1. However these macros are not actually referenced in
the driver, so remove them.
Change-Id: I173fb8ee9bcc89faa3d03be91dc1628f561c561e
CRs-Fixed: 2220914
The Kbuild currently conditionally defines the macro IGTK_OFFLOAD.
However this macro is not actually referenced in the driver, so remove
it.
Change-Id: I0c1bf314ad222e2348419950a462f5ce72163ec6
CRs-Fixed: 2220913
The Kbuild currently defines the macro ATH_SUPPORT_SHARED_IRQ. However
this macro is not actually referenced in the driver, so remove it.
Change-Id: I526038c83380da2526c403cba3bedeaa0e347983
CRs-Fixed: 2220912
Currently a set of ANI_COMPILER_TYPE macros are checked against, but
other than that they serve no purpose. As part of ongoing Kbuild
cleanup remove these obsolete macros.
Change-Id: Ia112d7d5ae8d12eae46144b53addc8ad54393bba
CRs-Fixed: 2220285
Currently, CONFIG_MCL_REGDB does not define for MCL,
then the driver uses the g_all_countries[] which is
for WIN.
Change-Id: If1b5873b65005381eabca95f530504d599a38e3b
CRs-Fixed: 2210854
Refactor the hdd portion of the Green AP feature so that it can be
easily excluded when the feature is not enabled.
Change-Id: I986c5ab7640b3182a12bef93748affefba067251
CRs-Fixed: 2216247
Network buffer debugging is being featurized as a separate feature from
regular memory debugging, and being controlled via the NBUF_MEMORY_DEBUG
build config flag. Enable NBUF_MEMORY_DEBUG for SLUB DEBUG builds to
retain the existing set of build time debug features.
Change-Id: Ib2ac2823ea5231508f4cca7d718ed266acd91274
CRs-Fixed: 2216804
While freeing IPA CE descriptor ring during driver unload, data abort
occurs due to double free.
Disable IPA offload feature flag until completing IPA offload feature.
Change-Id: Ia54e94dc9a0a21761ac1b05b45bf9334e6ff9613
CRs-Fixed: 2211078
Currently NUD events are used by Framework to detect
the Network Reachability. Framework issues disconnection
for NUD_FAILED event.
Now, NUD events are tracked within driver to detect the
reachability and based on TxRx traffic, driver takes decision
to issue disconnection.
Change-Id: I461610c220288ff1fd718bb7bc2dd8375588505c
CRs-Fixed: 2195796
Some features depend on whether the host architecture is ARM or not.
Define WLAN_HOST_ARCH_ARM so these features are included correctly.
Change-Id: Ibd19858edf5c24841fc31d342ab448e635ae0d68
CRs-Fixed: 2215586
Changes to enable/disable feature based on
profiles, debug mode, interface type and
architecture in Kbuild.
Change-Id: Ic9eb552c183143b4a2e0738c52b2e0c50db63a93
CRs-Fixed: 2200122
QDF_ASSERT is being featurized in
I39e3ab6499210569b6ce09d77ee72f0081741989. Enable the QDF_ASSERT feature
in debug builds by default.
Change-Id: I96484e6dbebcecf17ae7877dc30906ed8fa90bd7
CRs-Fixed: 2211987
IPA module has been moved to CLD component under the converged
driver model. Move the legacy IPA stats and debug info APIs to
the IPA component.
Change-Id: Ieb68a1579986c835f66c84e5e3b7aa2a4004383d
CRs-Fixed: 2177925
IPA module has been moved to CLD component under the converged
driver model. Move the legacy IPA RM APIs to the IPA component.
Change-Id: Iaff12ae3cec9ee6ff20543579692385c9a555613
CRs-Fixed: 2177925
IPA module has been moved to CLD component under the converged
driver model. Move the legacy IPA setup and initialization code
to the IPA component.
Change-Id: I63717eb2601c569131c6642f7330e4182e604424
CRs-Fixed: 2177925
As part of converged driver model remove IPA from
HDD and create a new IPA CLD component. Add files for
IPA core, dispatcher and target_if. Define IPA related
public and private structures.
Change-Id: I8848331edc7dd878f9fc51ef9f5e311ad91ed70b
CRs-Fixed: 2177925
Move Channel convert and frame indication logic from lim_p2p.c
to lim_utils.c and remove unused timer
pMac->lim.limTimers.gLimP2pSingleShotNoaInsertTimer.
Change-Id: I71de90d5fb88462e52148a434d43ea80c41cfe36
CRs-Fixed: 2191282
Update WLAN-IPA datapath buffer sharing for SMMU Stage 1
translation support. When SMMU Stage 1 translation is enabled,
DMA APIs return IO virtual address(IOVA) instead of physical
address. This IOVA needs to be mapped to physical address by IPA
module before accessing them.
Change-Id: I6b24cde7b7805395053a8fd8f9afbad202e6105f
CRS-Fixed: 2072960
Register fw down callback with QDF such that new UMAC
components can check if FW is down or not.
Change-Id: I86346db08ced59bb5f77c640eb7f9257cc0bb42c
CRs-Fixed: 2203498
Add new CONFIG_WLAN_OBJMGR_DEBUG flag in qcacld Kbuild for ObjMgr
Debug enhancements and use the flag to enable the existing
WLAN_OBJMGR_DEBUG CFlag.
Change-Id: I295c9b6822ab0c1396368ecc719b2ba1c8c834dd
CRs-Fixed: 2184785
Change Ie062ada403f8a31aebcde691396987ad9e5352b5 introduced level-
specific logging wrappers to support compiling out entire levels of
logging messages. Enable these logging wrappers in the build config.
Change-Id: Ia866d28d1581f2baa69967a9c342da5a5432ef62
CRs-Fixed: 2205917
Qcacld supports multiple driver modules instance generation with
different file names and Kbuild options. Fix driver load time and
compilation errors on this feature.
Change-Id: Ib405e6c475bace31933a28dc64082f2b6c046da9
CRs-fixed: 2197749
Change "qcacmn: Remove obsolete TDLS peer callback interface"
(Change-Id I32bb1f633b1dd1514aa6e4c3fdea044b3bca0009 in project
qca-wifi-host-cmn) has complete removed the old TDLS peer callbacks;
the new callbacks are the only ones supported. Therefore remove the
usage of USE_NEW_TDLS_PEER_CALLBACKS which was previously being used
to select the new callbacks.
Change-Id: I6b82b563e060727dfd02bfea40e4439ea09d7f75
CRs-Fixed: 2200994
Change "qcacmn: Introduce new versions of TDLS peer callbacks"
(Change-Id Id4ea23266b0f3e1480b645c5afce6c17585ccb46 in project
qca-wifi-host-cmn) introduced a new interface which removed an unused
parameter and changed obsolete naming. Update qcacld-3.0 to use this
new interface.
Change-Id: I5c4684ac0a62f314da26f92ece2c9a9874d63634
CRs-Fixed: 2200993
Add compilation flag to compile out HTC credit History
feature cleanly from the cld-3.2 driver binary.
Change-Id: I5f5e73e430d282c99d3077fb82ed1cb8eb79715a
CRs-Fixed: 2190545
BUILD_TAG changes in each build, which makes all files to recompile.
Notify build system that BULD_TAG is only used in wlan_hdd_main.c. This
reduces the recompile time significantly.
Change-Id: I40952e75eeb951ce8a693c8130dbc55a4a92eff5
CRs-Fixed: 2195100
PANIC_ON_BUG is currently enabled for all WLAN builds. While a customer
can, and should, disable PANIC_ON_BUG for end user builds, this can be
easily overlooked. Disable PANIC_ON_BUG by default on pure performance
builds, to avoid accidentally crashing end user devices. Customers can
opt-in to PANIC_ON_BUG as needed for validation on performance builds.
Change-Id: I79371206b20b978f4e61954c2f49bbb7b07ba95e
CRs-Fixed: 2186099
Currently driver created reg database instead of
db.txt for reg no-offload case.
Change-Id: Ia7853679532ad7536d34b4a4040feffb8566e907
CRs-Fixed: 2174245
Initial changes for the init deinit convergence wherein
service ready, extended service ready and init cmd are
converged.
Change-Id: I1c1fd50f51362f4f09561c259961e6761429fcd0
CRs-Fixed: 2178590
Add support for SAE AKM suites in CSR and also add support for
SAE in HDD. Also, add CONFIG_WLAN_FEATURE_SAE flag to enable/disable
SAE in Kbuild. When this is enabled, WLAN_FEATURE_SAE is used as a
feature flag for SAE.
Change-Id: I6254991afa0fd048d4f0b6f435ff630f1db04077
CRs-Fixed: 2029357
- replace the ftm command/event handle with common interfaces
- remove the event register from wma
- reconfigure the target_if_handle for FTM mode
- separate change will be raised to cleanup legacy code
Change-Id: If8e2dfc4c6bb400406be5d0d3fa53422db5c6fb5
CRs-fixed: 2162168
Create a skeleton for the DISA component. This is a CLD
component. Add files for disa core, dispatcher and
target_if. Define DISA related public structures and
objmgr objects. Add API's as stubs.
Change-Id: I63b32a0e7da0283d091815aaccea6b8703f5184c
CRs-Fixed: 2159579
