fix:
arch/x86/kernel/acpi/boot.c: In function ‘dmi_ignore_irq0_timer_override’:
arch/x86/kernel/acpi/boot.c:1443: error: implicit declaration of function ‘force_mask_ioapic_irq_2’
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The problems are that, with the ACPI vs timer overring issue _fixed_,
after using the box for some time (between several seconds and 1 hour, at
random) processes get very high CPU loads (once I've got X using 107% of
the CPU, for example) and the system becomes unresponsive, as though there
were interrupts lost or something similar.
Andreas Herrman reproduced similar problems:
> Ok, now I've reproduced the stability problem.
> - Using tip/master,
> - reverting e38502eb8aa82314d5ab0eba45f50e6790dadd88 and
> - applying your patch from this posting
> http://marc.info/?l=linux-kernel&m=121539354224562&w=4
>
> Starting X, firefox, gimp, tuxpaint and doing some drawing in tuxpaint
> results in a slow system. Drawing is almost not possible anymore --
> Selections of new colors, cursors etc. is performed with huge delay
> if it's performed at all.
>
> BTW, the code sets up timer IRQ as Virtual Wire IRQ:
>
> Jul 8 14:57:58 kodscha IO-APIC (apicid-pin) 2-22, 2-23 not connected.
> Jul 8 14:57:58 kodscha ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> Jul 8 14:57:58 kodscha ...trying to set up timer as Virtual Wire IRQ... works.
>
> and both INT0 and INT2 of IOAPIC are masked:
>
> Jul 8 14:57:58 kodscha NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:
> Jul 8 14:57:58 kodscha 00 000 1 0 0 0 0 0 0 00
> Jul 8 14:57:58 kodscha 01 003 0 0 0 0 0 1 1 31
> Jul 8 14:57:58 kodscha 02 003 1 0 0 0 0 0 0 30
>
> I've also seen strange CPU utilization -- with syslog-ng:
>
> top - 15:33:06 up 35 min, 4 users, load average: 1.70, 0.68, 0.37
> Tasks: 64 total, 4 running, 60 sleeping, 0 stopped, 0 zombie
> Cpu0 : 0.0%us,100.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
> Cpu1 : 6.4%us, 87.2%sy, 0.0%ni, 5.8%id, 0.0%wa, 0.6%hi, 0.0%si, 0.0%st
> Mem: 895384k total, 283568k used, 611816k free, 35492k buffers
> Swap: 1959920k total, 0k used, 1959920k free, 163044k cached
>
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> 4632 root 20 0 17216 800 580 S 104 0.1 0:34.22 syslog-ng
> 28505 root 20 0 205m 11m 4024 S 6 1.3 0:21.16 X
> 28518 root 20 0 56292 5652 4492 S 1 0.6 0:01.80 fluxbox
> 1 root 20 0 3724 608 508 S 0 0.1 0:00.36 init
>
> So far I have no clue why C1E-idle in conjunction with virtual wire
> mode causes this strange behaviour.
>
> ... and I start to think about the root cause of all this.
>
> I've performed similar tests under X with the IRQ0/INT0 configuration and
> I did not see above symptoms.
So lets fall back to the IRQ0/INT0 configuration on this box.
This basically restores the dont-use-the-lapic-timer exception mechanism
that was unconditional on this box prior commit 8750bf5 ("x86: add C1E
aware idle function").
Signed-off-by: Ingo Molnar <mingo@elte.hu>
handle head and tail that are not aligned to big pages (2MB/1GB boundary).
with this patch, on system that support gbpages, change:
last_map_addr: 1080000000 end: 1078000000
to:
last_map_addr: 1078000000 end: 1078000000
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When system have 4g less ram installed, and acpi table sit
near end of ram, make max_pfn cover them too,
so 64bit kernel don't need to mess up fixmap.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: "Suresh Siddha" <suresh.b.siddha@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
prepare for overmapped patch
also printout last_map_addr together with end
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/mm/pgtable_32.c:144: warning: 'fixmaps' defined but not used
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
arch/x86/kernel/smpboot.c: In function 'do_boot_cpu':
arch/x86/kernel/smpboot.c:943: warning: label 'restore_state' defined but not used
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- order of local variable declarations
- minor code changes
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- local caching of smp_processor_id() in default_do_nmi()
- v2: do not split default_do_nmi over two lines
On Wed, Jul 02, 2008 at 08:12:20PM +0400, Cyrill Gorcunov wrote:
> | -static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
> | +static notrace __kprobes void
> | +default_do_nmi(struct pt_regs *regs)
> | [ ... ]
> | -asmlinkage notrace __kprobes void default_do_nmi(struct pt_regs *regs)
> | +asmlinkage notrace __kprobes void
> | +default_do_nmi(struct pt_regs *regs)
>
> Hi Alexander, good done, thanks! But why did you split default_do_nmi
> definition by two lines? I think it would be better to keep them as it
> was before, ie by a single line
>
> static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
Thanks! Here is the replacement patch with default_do_nmi left on
a single line.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
- if (cond) block -> if (!cond) goto end_of_block
- local caching of current
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reorder headers and collect globals in traps_32.c and traps_64.c
Code size and data size are unaffected by the changes. Code
itself is changed due to different ordering of data and bss.
The bss segment changed size due to a change in the packing
of the variables.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Acked-by: Cyrill Gorcunov <gorcunov@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch does not change the generated object files.
Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rename the paravirtualized calculate_cpu_khz to calibrate_tsc.
In all cases, we actually calibrate_tsc and use that as the cpu_khz value.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Unify the clocksource code.
Unify the tsc_init code.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge the tsc calibration code for the 32bit and 64bit kernel.
The paravirtualized calculate_cpu_khz for 64bit now points to the correct
tsc_calibrate code as in 32bit.
Original native_calculate_cpu_khz for 64 bit is now called as calibrate_cpu.
Also moved the recalibrate_cpu_khz function in the common file.
Note that this function is called only from powernow K7 cpu freq driver.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Move the basic global variable definitions and sched_clock handling in the
common "tsc.c" file.
- Unify notsc kernel command line handling for 32 bit and 64bit.
- Functional changes for 64bit.
- "tsc_disabled" is updated if "notsc" is passed at boottime.
- Fallback to jiffies for sched_clock, incase notsc is passed on
commandline.
Signed-off-by: Alok N Kataria <akataria@vmware.com>
Signed-off-by: Dan Hecht <dhecht@vmware.com>
Cc: Dan Hecht <dhecht@vmware.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Add lapic resource into kernel resource map and mark it as busy
Signed-off-by: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: "Maciej W. Rozycki" <macro@linux-mips.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
CC: Maciej W. Rozycki <macro@linux-mips.org>
so when it is called after early_param, e820_saved get updated too.
esp for mpc update.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
seperate reserve_setup_data into e820_reserved_setup_data,
and reserve_early_setup_data.
So could use e820_reserved_setup_data to backup e820 with setup_data.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Bernhard Walle <bwalle@suse.de>
Cc: Ying Huang <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
so other path that will override memory_setup or
machine_specific_memory_setup could have e820_saved too.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Bernhard Walle <bwalle@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch uses the /sys/firmware/memmap interface provided in the last patch
on the x86 architecture when E820 is used. The patch copies the E820
memory map very early, and registers the E820 map afterwards via
firmware_map_add_early().
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Acked-by: Greg KH <gregkh@suse.de>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Cc: kexec@lists.infradead.org
Cc: yhlu.kernel@gmail.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
we already have the same srat handling interface for 32bit.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Rather than using _PAGE_GLOBAL - which not all CPUs support - to test
CPA, use one of the reserved-for-software-use PTE flags instead. This
allows CPA testing to work on CPUs which don't support PGD.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
From: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Older x86-32 processors do not support global mappings (PGD), so must
only use it if the processor supports it.
The _PAGE_KERNEL* flags always have _PAGE_KERNEL set, since logically
we always want it set.
This is OK even on processors which do not support PGD, since all
_PAGE flags are masked with __supported_pte_mask before being turned
into a real in-pagetable pte. On 32-bit systems, __supported_pte_mask
is initialized to not contain _PAGE_GLOBAL, and it is then added if
the CPU is found to support it.
The x86-32 code used to use __PAGE_KERNEL/__PAGE_KERNEL_EXEC for this
purpose, but they're now redundant and can be removed.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Consistently set _PAGE_GLOBAL in _PAGE_KERNEL flags. This makes 32-
and 64-bit code consistent, and removes some special cases where
__PAGE_KERNEL* did not have _PAGE_GLOBAL set, causing confusion as a
result of the inconsistencies.
This patch only affects x86-64, which generally always supports PGD.
The x86-32 patch is next.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
When allocating a new pud, unconditionally populate the pgd (why did
we bother to create a new pud if we weren't going to populate it?).
This will only happen if the pgd slot was empty, since any existing
pud will be reused.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Mark McLoughlin <markmc@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
call it right after we are done with MADT/mptable handling, instead of
doing that in setup_per_cpu_areas() later on...
this way for_possible_cpu() can be used early.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
when acpi=off, cpu_to_apicid is ready after get_smp_config
so need to move init_cpu_to_node after it.
otherwise, we will get wrong cpu->node mapping, and it will rely on
amd_detect_cmp() to correct it - but that is too late as
setup_per_cpu_data is already called before that so we will get
per_cpu_data on the wrong node.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
move out e820_register_active_regions from non numa zones_sizes_init()
and remove numa version zones_sizes_init().
and let 32 bit call remove_all_active_ranges() in setup_arch() directly
like 64-bit
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
so it has a more meaningful name.
also change it to static.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
This patch removes the need of the crashkernel=...@offset parameter to define
a fixed offset for crashkernel reservation. That feature can be used together
with a relocatable kernel where the kexec-tools relocate the kernel and
get the actual offset from /proc/iomem.
The use case is a kernel where the .text+.data+.bss is after 16M physical
memory (debug kernel with lockdep on x86_64 can cause that) which caused a
major pain in autoconfiguration in our distribution.
Also, that patch unifies crashdump architectures a bit since IA64 has
that semantics from the very beginning of the kdump port.
Signed-off-by: Bernhard Walle <bwalle@suse.de>
Cc: vgoyal@redhat.com
Cc: Bernhard Walle <bwalle@suse.de>
Cc: kexec@lists.infradead.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
e820_search_gap also take a end_addr parameter to limit search from
start_addr to end_addr.
Signed-off-by: AloK N Kataria <akataria@vmware.com>
Acked-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: "lenb@kernel.org" <lenb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
* When CONFIG_DEBUG_PER_CPU_MAPS is set, the node passed to
node_to_cpumask and node_to_cpumask_ptr should be validated.
If invalid, then a dump_stack is performed and a zero cpumask
is returned.
v2: Slightly different version to remove a compiler warning.
v3: Redone to reflect moving setup.c -> setup_percpu.c
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: "akpm@linux-foundation.org" <akpm@linux-foundation.org>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ingo Molnar wrote:
> -tip auto-testing found pagetable corruption (CPA self-test failure):
>
> [ 32.956015] CPA self-test:
> [ 32.958822] 4k 2048 large 508 gb 0 x 2556[ffff880000000000-ffff88003fe00000] miss 0
> [ 32.964000] CPA ffff88001d54e000: bad pte 1d4000e3
> [ 32.968000] CPA ffff88001d54e000: unexpected level 2
> [ 32.972000] CPA ffff880022c5d000: bad pte 22c000e3
> [ 32.976000] CPA ffff880022c5d000: unexpected level 2
> [ 32.980000] CPA ffff8800200ce000: bad pte 200000e3
> [ 32.984000] CPA ffff8800200ce000: unexpected level 2
> [ 32.988000] CPA ffff8800210f0000: bad pte 210000e3
>
> config and full log can be found at:
>
> http://redhat.com/~mingo/misc/config-Mon_Jun_30_11_11_51_CEST_2008.bad
> http://redhat.com/~mingo/misc/log-Mon_Jun_30_11_11_51_CEST_2008.bad
Phew. OK, I've worked this out. Short version is that's it's a false
alarm, and there was no real failure here. Long version:
* I changed the code to create the physical mapping pagetables to
reuse any existing mapping rather than replace it. Specifically,
reusing an pud pointed to by the pgd caused this symptom to appear.
* The specific PUD being reused is the one created statically in
head_64.S, which creates an initial 1GB mapping.
* That mapping doesn't have _PAGE_GLOBAL set on it, due to the
inconsistency between __PAGE_* and PAGE_*.
* The CPA test attempts to clear _PAGE_GLOBAL, and then checks to
see that the resulting range is 1) shattered into 4k pages, and 2)
has no _PAGE_GLOBAL.
* However, since it didn't have _PAGE_GLOBAL on that range to start
with, change_page_attr_clear() had nothing to do, and didn't
bother shattering the range,
* resulting in the reported messages
The simple fix is to set _PAGE_GLOBAL in level2_ident_pgt.
An additional fix to make CPA testing more robust by using some other
pagetable bit (one of the unused available-to-software ones). This
would solve spurious CPA test warnings under Xen which uses _PAGE_GLOBAL
for its own purposes (ie, not under guest control).
Also, we should revisit the use of _PAGE_GLOBAL in asm-x86/pgtable.h,
and use it consistently, and drop MAKE_GLOBAL. The first time I
proposed it it caused breakages in the very early CPA code; with luck
that's all fixed now.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Mark McLoughlin <markmc@redhat.com>
Cc: xen-devel <xen-devel@lists.xensource.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Vegard Nossum <vegard.nossum@gmail.com>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
kva ram already mapped right after away, so don't need to get that for low ram.
avoid wasting one copy of pgdat.
also add node id in early_res name in case we get it from find_e820_area.
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Ying Huang would like setup_data to be reserved, but not included in the
no save range.
Here we try to modify the e820 table to reserve that range early.
also add that in early_res in case bootloader messes up with the ramdisk.
other solution would be
1. add early_res_to_highmem...
2. early_res_to_e820...
but they could reserve another type memory wrongly, if early_res has some
resource reserved early, and not needed later, but it is not removed from
early_res in time. Like the RAMDISK (already handled).
Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: andi@firstfloor.org
Tested-by: Huang, Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
