Copy in SN2 RTC based ITC emulation for fast exit. The two versions
have the same size, so a dropin is simpler than patching the branch
instruction to hit the SN2 version.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
On SN2 do not pass down the real ITC frequency, but rather patch the
values to match the SN2 RTC frequency.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Move all reading of special register 'AR_ITC' into two functions, one
in the kernel and one in the VMM module. When running on SN2, base the
result on the RTC rather the system ITC, as the ITC isn't
synchronized.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
On SN2, map in the SN2 RTC registers to the VMM module, needed for ITC
emulation.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The new way does not require additional loop over vcpus to calculate
the one with lowest priority as one is chosen during delivery bitmap
construction.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Use kvm_apic_match_dest() in kvm_get_intr_delivery_bitmask() instead
of duplicating the same code. Use kvm_get_intr_delivery_bitmask() in
apic_send_ipi() to figure out ipi destination instead of reimplementing
the logic.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Get rid of ioapic_inj_irq() and ioapic_inj_nmi() functions.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Modify the arg of kvm_get_lowest_prio_vcpu().
Make it consistent with its declaration.
Signed-off-by: Yang Zhang <yang.zhang@intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reorder locking as down_read() may return with local interrupts enabled,
which means we could go into vti_vcpu_run() with interrupts enabled.
This caused random crashes on the Altix as the timer interrupt tried
to read a memory mapped clock source, for which the TLB had not yet been
reinstated in the exit, before ipsr was retored.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch removes the following warnings and related ones.
Plus some cosmetics.
arch/ia64/kernel/patch.c:112: warning: passing argument 1 of 'paravirt_fc' makes integer from pointer without a cast
arch/ia64/kernel/patch.c:135: warning: passing argument 1 of 'paravirt_fc' makes integer from pointer without a cast
arch/ia64/kernel/patch.c:166: warning: passing argument 1 of 'paravirt_fc' makes integer from pointer without a cast
arch/ia64/kernel/patch.c:202: warning: passing argument 1 of 'paravirt_fc' makes integer from pointer without a cast
arch/ia64/kernel/patch.c:220: warning: passing argument 1 of 'paravirt_fc' makes integer from pointer without a cast
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
define paravirt_dv_serialize_data() and insert it to suppress
false positive warnings.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Include the newly introduced msidef.h to solve the build issues.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
IRQ injection status is either -1 (if there was no CPU found
that should except the interrupt because IRQ was masked or
ioapic was misconfigured or ...) or >= 0 in that case the
number indicates to how many CPUs interrupt was injected.
If the value is 0 it means that the interrupt was coalesced
and probably should be reinjected.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Account for number of online cpus and use that in loops iterating over
the list of vpus instead of scanning the full array unconditionally.
This patch is a building block to facilitate allowing to bump up
the size of MAX_VCPUS significantly.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
For windows 2008, it needs more pal calls to implement for booting.
In addition, also changes the name of set_{sal, pal}_call_result to
get_{sal,pal}_call_result for readability.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add the support to translate PAL Call's pointer args.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Simply the logic of hash vTLB, and export kvm_gpa_to_mpa.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently KVM has a static routing from GSI numbers to interrupts (namely,
0-15 are mapped 1:1 to both PIC and IOAPIC, and 16:23 are mapped 1:1 to
the IOAPIC). This is insufficient for several reasons:
- HPET requires non 1:1 mapping for the timer interrupt
- MSIs need a new method to assign interrupt numbers and dispatch them
- ACPI APIC mode needs to be able to reassign the PCI LINK interrupts to the
ioapics
This patch implements an interrupt routing table (as a linked list, but this
can be easily changed) and a userspace interface to replace the table. The
routing table is initialized according to the current hardwired mapping.
Signed-off-by: Avi Kivity <avi@redhat.com>
Two KVM archs support irqchips and two don't. Add a Kconfig item to
make selecting between the two models easier.
Signed-off-by: Avi Kivity <avi@redhat.com>
Remove some unnecessary blank lines to accord with Kernel's coding style.
Also remove vcpu_get_itir_on_fault due to no reference to it.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Implement KVM_IA64_VCPU_[GS]ET_STACK ioctl calls. This is required
for live migrations.
Patch is based on previous implementation that was part of old
GET/SET_REGS ioctl calls.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This rips out the support for KVM_DEBUG_GUEST and introduces a new IOCTL
instead: KVM_SET_GUEST_DEBUG. The IOCTL payload consists of a generic
part, controlling the "main switch" and the single-step feature. The
arch specific part adds an x86 interface for intercepting both types of
debug exceptions separately and re-injecting them when the host was not
interested. Moveover, the foundation for guest debugging via debug
registers is layed.
To signal breakpoint events properly back to userland, an arch-specific
data block is now returned along KVM_EXIT_DEBUG. For x86, the arch block
contains the PC, the debug exception, and relevant debug registers to
tell debug events properly apart.
The availability of this new interface is signaled by
KVM_CAP_SET_GUEST_DEBUG. Empty stubs for not yet supported archs are
provided.
Note that both SVM and VTX are supported, but only the latter was tested
yet. Based on the experience with all those VTX corner case, I would be
fairly surprised if SVM will work out of the box.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm_arch_sync_events is introduced to quiet down all other events may happen
contemporary with VM destroy process, like IRQ handler and work struct for
assigned device.
For kvm_arch_sync_events is called at the very beginning of kvm_destroy_vm(), so
the state of KVM here is legal and can provide a environment to quiet down other
events.
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The floating-point registers f6-f11 is used by vmm and
saved in kvm-pt-regs, so should set the correct bit mask
and the pointer in fp_state, otherwise, fpswa may touch
vmm's fp registers instead of guests'.
In addition, for fp trap handling, since the instruction
which leads to fp trap is completely executed, so can't
use retry machanism to re-execute it, because it may
pollute some registers.
Signed-off-by: Yang Zhang <yang.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Impact: file renamed
The code in the vtd.c file can be reused for other IOMMUs as well. So
rename it to make it clear that it handle more than VT-d.
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Fix kvm_arch_vcpu_ioctl_[gs]et_regs() to do something meaningful on
ia64. Old versions could never have worked since they required
pointers to be set in the ioctl payload which were never being set by
the ioctl handler for get_regs.
In addition reserve extra space for future extensions.
The change of layout of struct kvm_regs doesn't require adding a new
CAP since get/set regs never worked on ia64 until now.
This version doesn't support copying the KVM kernel stack in/out of
the kernel. This should be implemented in a seperate ioctl call if
ever needed.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Since vmm runs in an isolated address space and it is just a copy
of host's kvm-intel module, so once vmm crashes, we just crash all guests
running on it instead of crashing whole kernel.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use printk infrastructure to print out some debug info once VM crashes.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
kvm-intel module is relocated to an isolated address space
with kernel, so it can't call host kernel's printk for debug
purpose. In the module, we implement the printk to output debug
info of vmm.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Remove the lock protection for kvm halt logic, otherwise,
once other vcpus want to acquire the lock, and they have to
wait all vcpus are waken up from halt.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
PAL_VPS_RESUME_HANDLER should use r26 to hold vac fields according to SDM.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Use CFLAGS_vcpu.o, not EXTRA_CFLAGS, to provide fixed register information
to the compiler.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
In the case of !CONFIG_SMP, raw_spinlock_t is empty and the spinlock functions
don't build. Fix by defining spinlock functions for the uniprocessor case.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Before a vcpu blocks, it should switch to the guest signal mask to allow
signals to unblock it.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Common halt logic was changed by x86 and did not update ia64. This patch
updates halt for ia64.
Fixes a regression causing guests to hang with more than 2 vcpus.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Every call of kvm_set_irq() should offer an irq_source_id, which is
allocated by kvm_request_irq_source_id(). Based on irq_source_id, we
identify the irq source and implement logical OR for shared level
interrupts.
The allocated irq_source_id can be freed by kvm_free_irq_source_id().
Currently, we support at most sizeof(unsigned long) different irq sources.
[Amit: - rebase to kvm.git HEAD
- move definition of KVM_USERSPACE_IRQ_SOURCE_ID to common file
- move kvm_request_irq_source_id to the update_irq ioctl]
[Xiantao: - Add kvm/ia64 stuff and make it work for kvm/ia64 guests]
Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
With intel iommu hardware, we can assign devices to kvm/ia64 guests.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Using vt-d, kvm guests can be assigned physcial devices, so
this patch introduce a new mmio type (directed mmio)
to handle its mmio access.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
Don't try to do put_page once the entries are mmio.
Set the tag to indicate the mmio space for vmm setting
TLB's memory attribute.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@qumranet.com>
