There is check error in range condition that can never be entered
even with invalid input.
Replace incorrent checking code with already existing valid checker.
Signed-off-by: hyeongseok.kim <hyeongseok@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
This code calls brelse(bh) and then dereferences "bh" on the next line
resulting in a possible use after free. The brelse() should just be
moved down a line.
Fixes: b676fdbcf4c8 ("exfat: standardize checksum calculation")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
At truncate, there is a problem of incorrect updating in the file entry
pointer instead of stream entry. This will cause the problem of
overwriting the time field of the file entry to new_size. This patch
change entry pointer with stream entry.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
kbuild test robot reported :
fs/exfat/nls.c:531:22: warning: Variable 'p_uniname->name_len'
is reassigned a value before the old one has been used.
The reassignment for p_uniname->name_len is not needed and remove it.
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
As Ubuntu and Fedora release new version used kernel version equal to or
higher than v5.4, They started to support kernel exfat filesystem.
Linus reported a mount error with new version of exfat on Fedora:
exfat: Unknown parameter 'namecase'
This is because there is a difference in mount option between old
staging/exfat and new exfat. And utf8, debug, and codepage options as
well as namecase have been removed from new exfat.
This patch add the dummy mount options as deprecated option to be
backward compatible with old one.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To clarify that it is a 16-bit checksum, the parts related to the 16-bit
checksum are renamed and change type to u16.
Furthermore, replace checksum calculation in exfat_load_upcase_table()
with exfat_calc_checksum32().
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Add Boot-Regions verification specified in exFAT specification.
Note that the checksum type is strongly related to the raw structure,
so the'u32 'type is used to clarify the number of bits.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Separate the boot sector analysis to read_boot_sector().
And add a check for the fs_name field.
Furthermore, add a strict consistency check, because overlapping areas
can cause serious corruption.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Aggregate PBR related definitions and redefine as boot_sector to comply
with the exFAT specification.
And, rename variable names including 'pbr'.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Optimize directory access based on exfat_entry_set_cache.
- Hold bh instead of copied d-entry.
- Modify bh->data directly instead of the copied d-entry.
- Write back the retained bh instead of rescanning the d-entry-set.
And
- Remove unused cache related definitions.
Signed-off-by: Tetsuhiro Kohada <kohada.tetsuhiro@dc.mitsubishielectric.co.jp>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
'es' is malloced from exfat_get_dentry_set() in exfat_find() and should
be freed before leaving from the error handling cases, otherwise it will
cause memory leak.
Fixes: 5f2aa075070c ("exfat: add inode operations")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Doing copy_file_range() on exfat with a file opened for direct IO leads
to an -EFAULT:
# xfs_io -f -d -c "truncate 32768" \
-c "copy_range -d 16384 -l 16384 -f 0" /mnt/test/junk
copy_range: Bad address
and the reason seems to be that we go through:
default_file_splice_write
splice_from_pipe
__splice_from_pipe
write_pipe_buf
__kernel_write
new_sync_write
generic_file_write_iter
generic_file_direct_write
exfat_direct_IO
do_blockdev_direct_IO
iov_iter_get_pages
and land in iterate_all_kinds(), which does "return -EFAULT" for our kvec
iter.
Setting exfat's splice_write to iter_file_splice_write fixes this and lets
fsx (which originally detected the problem) run to success from the xfstests
harness.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Replace time_ms with time_cs in the file directory entry structure
and related functions.
The unit of create_time_ms/modify_time_ms in File Directory Entry are not
'milli-second', but 'centi-second'.
The exfat specification uses the term '10ms', but instead use 'cs' as in
msdos_fs.h.
Signed-off-by: Tetsuhiro Kohada <kohada.t2@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
exfat atimes are restricted to only 2s granularity so after
we set an atime, round it down to the nearest 2s and set the
sub-second component of the timestamp to 0.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
The s_time_gran superblock field indicates the on-disk nanosecond
granularity of timestamps, and for exfat that seems to be 10ms, so
set s_time_gran to 10000000ns. Without this, in-memory timestamps
change when they get re-read from disk.
Signed-off-by: Eric Sandeen <sandeen@sandeen.net>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
There is no need to init 'sync' in exfat_set_vol_flags().
This also fixes the following coccicheck warning:
fs/exfat/super.c:104:6-10: WARNING: Assignment of 0/1 to bool variable
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
After applying previous two patches, these functions are not used anymore.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Function partial_name_hash() takes long type value into which can be stored
one Unicode code point. Therefore conversion from UTF-32 to UTF-16 is not
needed.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Unify access to boot sector via 'sbi->pbr_bh'.
This fixes vol_flags inconsistency at read failed in fs_set_vol_flags(),
and buffer_head leak in __exfat_fill_super().
Signed-off-by: Tetsuhiro Kohada <Kohada.Tetsuhiro@dc.MitsubishiElectric.co.jp>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Remove the direct use of KERN_<LEVEL> in functions by creating
separate exfat_<level> macros.
Miscellanea:
o Remove several unnecessary terminating newlines in formats
o Realign arguments and fit to 80 columns where appropriate
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
This adds the necessary MODULE_ALIAS_FS() to exfat so the module gets
automatically loaded when an exfat filesystem is mounted.
Signed-off-by: Thomas Backlund <tmb@mageia.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Discard support was always unconditionally disabled. Now it is disabled
only in the case when blk_queue_discard() returns false.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
If two Unicode code points represented in UTF-16 are different then also
their UTF-32 representation must be different. Therefore conversion from
UTF-32 to UTF-16 is not needed.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
