When CONFIG_DEBUG_RODATA is enabled undo the ro mapping and redo it again.
This gives some simple testing for change_page_attr().
Signed-off-by: Andi Kleen <ak@suse.de>
Acked-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
If SHARED_KERNEL_PMD is false, then we need to allocate and initialize
the kernel pmd. We can easily piggy-back this onto the existing pmd
prepopulation code.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
In PAE mode, an update to the pgd requires a cr3 reload to make sure
the processor notices the changes. Since this also has the
side-effect of flushing the tlb, its an expensive operation which we
want to avoid where possible.
This patch mitigates the cost of installing the initial set of pmds on
process creation by preallocating them when the pgd is allocated.
This avoids up to three tlb flushes during exec, as it creates the new
process address space while the pagetable is in active use.
The pmds will be freed as part of the normal pagetable teardown in
free_pgtables, which is called in munmap and process exit. However,
free_pgtables will only free parts of the pagetable which actually
contain mappings, so stray pmds may still be attached to the pgd at
pgd_free time. We must mop them up to prevent a memory leak.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: William Irwin <wli@holomorphy.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Convert macros into inline functions, for better type-checking.
This patch required a little bit of fiddling with headers in order to
make __(pte|pmd)_free_tlb inline rather than macros.
asm-generic/tlb.h includes asm/pgalloc.h, though it doesn't directly
use any pgalloc definitions. I removed this include to avoid an
include cycle, but it may cause secondary compile failures by things
depending on the indirect inclusion; arch/x86/mm/hugetlbpage.c was one
such place; there may be others.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add mm to paravirt_alloc_pd, partly to make it consistent with
paravirt_alloc_pt, and because later changes will make use of it.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Fix the following warnings:
WARNING: arch/x86/mm/built-in.o(.text+0x1abc): Section mismatch: reference to .init.data:nodes_parsed in 'unparse_node'
WARNING: arch/x86/mm/built-in.o(.text+0x1ac6): Section mismatch: reference to .cpuinit.data:apicid_to_node in 'unparse_node'
WARNING: arch/x86/mm/built-in.o(.text+0x1ad2): Section mismatch: reference to .cpuinit.data:apicid_to_node in 'unparse_node'
unparse_node are static and only used by acpi_scan_nodes which
is already annotated __init.
So we annotate unparse_node with __init.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I found a small bug of NUMA emulation code for x86_64. (CONFIG_NUMA_EMU)
If machine is non-NUMA, find_node_by_addr() should return
NUMA_NO_NODE, but current implementation code returns existent maximum
NUMA node number + 1.
This is not existent NUMA node number.
However, this behaviour does not affect NUMA emulation fortunately, because
acpi_fake_nodes() that is caller of find_node_by_addr() gets pxm
(proximity domain) by node_to_pxm() from non-existent NUMA node number
that was returned by find_node_by_addr().
node_to_pxm() returns PXM_INVAL that means illegal or non-existent
NUMA node number.
Signed-off-by: Minoru Usui <usui@mxm.nes.nec.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Both of these references to cpu_to_node() can potentially occur
before the "late" cpu_to_node map is setup. Therefore, they
should be changed to use early_cpu_to_node().
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the size of node ids for X86_64 from u8 to s16 to
accomodate more than 32k nodes and allow for NUMA_NO_NODE
(-1) to be sign extended to int.
Cc: David Rientjes <rientjes@google.com>
Cc: Yinghai Lu <yhlu.kernel@gmail.com>
Cc: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The DISCONTIG memory model on x86 32 bit uses a remap allocator early
in boot. The objective is that portions of every node are mapped in to
the kernel virtual area (KVA) in place of ZONE_NORMAL so that node-local
allocations can be made for pgdat and mem_map structures.
With SPARSEMEM, the amount that is set aside is insufficient for all the
mem_maps to be allocated. During the boot process, it falls back to using
the bootmem allocator. This breaks assumptions that SPARSEMEM makes about
the layout of the mem_map in memory and results in a VM_BUG_ON triggering
due to pfn_to_page() returning garbage values.
This patch only enables the remap allocator for use with DISCONTIG.
Without SRAT support, a compile-error occurs because ACPI table parsing
functions are only available in x86-64. This patch also adds no-op stubs
and prints a warning message. What likely needs to be done is sharing
the table parsing functions between 32 and 64 bit if they are
compatible.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
call early_cpu_to_node() since per_cpu(cpu_to_node_map) might not be setup
yet.
I also had to export x86_cpu_to_node_map_early_ptr because of some calls
from the network code to numa_node_id():
net/ipv4/netfilter/arp_tables.c:
net/ipv4/netfilter/ip_tables.c:
net/ipv4/netfilter/ip_tables.c:
Signed-off-by: Mike Travis <travis@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
sparsemem is only one supported, so could remove FLAT_NODE_MEM related,
that is only needed !SPARSEMEM
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use v8086_mode inline in fault_32.c, no functional change
also ifdef the section for 32-bit only and add to fault_64.c
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Provide a means to trap usages of per_cpu map variables before
they are setup. Define CONFIG_DEBUG_PER_CPU_MAPS to activate.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change static bios_cpu_apicid array to a per_cpu data variable.
This includes using a static array used during initialization
similar to the way x86_cpu_to_apicid[] is handled.
There is one early use of bios_cpu_apicid in apic_is_clustered_box().
The other reference in cpu_present_to_apicid() is called after
smp_set_apicids() has setup the percpu version of bios_cpu_apicid.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:
char cpu_to_node_map[NR_CPUS];
fixup:
- Split cpu_to_node function into "early" and "late" versions
so that x86_cpu_to_node_map_early_ptr is not EXPORT'ed and
the cpu_to_node inline function is more streamlined.
- This also involves setting up the percpu maps as early as possible.
- Fix X86_32 NUMA build errors that previous version of this
patch caused.
V2->V3:
- add early_cpu_to_node function to keep cpu_to_node efficient
- move and rename smp_set_apicids() to setup_percpu_maps()
- call setup_percpu_maps() as early as possible
V1->V2:
- Removed extraneous casts
- Fix !NUMA builds with '#ifdef CONFIG_NUMA"
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
They now look like:
hal-resmgr[13791]: segfault at 3c rip 2b9c8caec182 rsp 7fff1e825d30 error 4 in libacl.so.1.1.0[2b9c8caea000+6000]
This makes it easier to pinpoint bugs to specific libraries.
And printing the offset into a mapping also always allows to find the
correct fault point in a library even with randomized mappings. Previously
there was no way to actually find the correct code address inside
the randomized mapping.
Relies on earlier patch to shorten the printk formats.
They are often now longer than 80 characters, but I think that's worth it.
[includes fix from Eric Dumazet to check d_path error value]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On x86-64 there are several memory allocations before bootmem. To avoid
them stomping on each other they used to be all hard coded in bad_area().
Replace this with an array that is filled as needed.
This cleans up the code considerably and allows to expand its use.
Cc: peterz@infradead.org
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Adding the address of the faulting library missed removing a
line ending from X86_32.
Also update the shorter printk format for X86_32 in fault_64.c
to make it easier to se the remaining differences.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch removes the EXPORT_SYMBOL for:
x86_cpu_to_node_map_init
x86_cpu_to_node_map_early_ptr
... thus fixing the section mismatch problem.
Also, the mem -> node hash lookup is fixed.
Signed-off-by: Mike Travis <travis@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
WARNING: vmlinux.o(__ksymtab+0x670): Section mismatch: reference to .init.data:x86_cpu_to_node_map_init (between '__ksymtab_x86_cpu_to_node_map_init' and '__ksymtab_node_data')
Cc: Matthew Dobson <colpatch@us.ibm.com>
Cc: Mike Travis <travis@sgi.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add caller of is_errata93() to X86_32, ifdef'd to do
nothing.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Comments, indentation, printk format.
Uses task_pid_nr() on X86_64 now, but this is always defined
to task->pid.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Copy the prefetch of map_sem from X86_64 and move the check
notify_page_fault (soon to be kprobe_handle_fault) out of
the unlikely if() statement.
This makes the X86_32|64 pagefault handlers closer to each
other.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
is_prefetch was the last user of get_segment_eip and only on
X86_32. This function returned the faulting instruction's
address and set the upper segment limit.
Instead, use the convert_ip_to_linear helper and rely on
probe_kernel_address to do the segment checks which was
already done everywhere the segment limit was being checked
on X86_32.
Remove get_segment_eip as well.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Rename convert_rip_to_linear to convert_ip_to_linear for shared
X86_32|64 use.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the following static arrays sized by NR_CPUS to
per_cpu data variables:
char cpu_to_node_map[NR_CPUS];
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the size of node ids from 8 bits to 16 bits to
accomodate more than 256 nodes.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change the size of APICIDs from u8 to u16. This partially
supports the new x2apic mode that will be present on future
processor chips. (Chips actually support 32-bit APICIDs, but that
change is more intrusive. Supporting 16-bit is sufficient for now).
Signed-off-by: Jack Steiner <steiner@sgi.com>
I've included just the partial change from u8 to u16 apicids. The
remaining x2apic changes will be in a separate patch.
In addition, the fake_node_to_pxm_map[] and fake_apicid_to_node[]
tables have been moved from local data to the __initdata section
reducing stack pressure when MAX_NUMNODES and MAX_LOCAL_APIC are
increased in size.
Signed-off-by: Mike Travis <travis@sgi.com>
Reviewed-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
setup_node_zones() calcuates some variables but only use them when
FLAT_NODE_MEM_MAP is set
so change the MACRO postion to avoid calculating.
also change it to static, and rename it to flat_setup_node_zones().
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
For enhancing the 32 bit EBP based backtracer, I need the capability
for the backtracer to tell it's customer that an entry is either
reliable or unreliable, and the backtrace printing code then needs to
print the unreliable ones slightly different.
This patch adds the basic capability, the next patch will add a user
of this capability.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
get_segment_eip has similarities to convert_rip_to_linear(),
and is used in a similar context. Move get_segment_eip to
step.c to allow easier consolidation.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Should be the last of the error_code tests that could use
the PF_ defines. Makes X86_32|64 a little closer.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Make users of supported_pte_mask common. This has the side-effect of
introducing the variable for 32-bit non-PAE, but I think its a pretty
small cost to simplify the code.
Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
On 32-bit NUMA, the memmap representing struct pages on each node is
allocated from node-local memory if possible. As only node-0 has memory from
ZONE_NORMAL, the memmap must be mapped into low memory. This is done by
reserving space in the Kernel Virtual Area (KVA) for the memmap belonging
to other nodes by taking pages from the end of ZONE_NORMAL and remapping
the other nodes memmap into those virtual addresses. The node boundaries
are then adjusted so that the region of pages is not used and it is marked
as reserved in the bootmem allocator.
This reserved portion of the KVA is PMD aligned althought
strictly speaking that requirement could be lifted (see thread at
http://lkml.org/lkml/2007/8/24/220). The problem is that when aligned, there
may be a portion of ZONE_NORMAL at the end that is not used for memmap and
does not have an initialised memmap nor is it marked reserved in the bootmem
allocator. Later in the boot process, these pages are freed and a storm of
Bad page state messages result.
This patch marks these pages reserved that are wasted due to alignment
in the bootmem allocator so they are not accidently freed. It is worth
noting that memory from node-0 is wasted where it could have been put into
ZONE_HIGHMEM on NUMA machines. Worse, the KVA is always reserved from the
location of real memory even when there is plenty of spare virtual address
space.
This patch also makes sure that reserve_bootmem() is not called with a
0-length size in numa_kva_reserve(). When this happens, it usually means
that a kernel built for Summit is being booted on a normal machine. The
resulting BUG_ON() is misleading so it is caught here.
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The boot protocol has until now required that the initrd be located in
lowmem, which makes the lowmem/highmem boundary visible to the boot
loader. This was exported to the bootloader via a compile-time
field. Unfortunately, the vmalloc= command-line option breaks this
part of the protocol; instead of adding yet another hack that affects
the bootloader, have the kernel relocate the initrd down below the
lowmem boundary inside the kernel itself.
Note that this does not rely on HIGHMEM being enabled in the kernel.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
empty_zero_page is in .bss section, and it is cleared in clear_bss by
x86_64_start_kernel(). So don't clear that again in mem_init
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Use the force_sig_info_fault helper from X86_32 in X86_64.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Move X86_32 only get_segment_eip to X86_64
Move X86_64 only is_errata93 to X86_32
Change X86_32 loop in is_prefetch to highlight the differences
between them. Fold the logic from __is_prefetch in as well on
X86_32.
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
