Driver state of loading, unloading, logp are maintained in
multiple modules like HDD, CDS. Change to maintain the driver
state in CDS and provide CDS APIs to find out the state of the
driver so that any of the module can query it.
Also rename the logp to recovery in progress for clarity purpose.
Change-Id: I8e1864e1bc7f3b1dd6f4eb804ce2578c6695967d
CRs-fixed: 958659
Add event handler for oem data response event from FW.
Add new boolean member to differentiate the response
generated internally and one coming from the FW.
Change-Id: Ia906c5dcbb7e560fd78ccd96fc47c7801b33aa6a
CRs-Fixed: 942261
Use assoc req from roam_sync_ind_ptr instead of ft_session_ptr in
condition statement.
assoc req from ft_session_ptr is not populated yet and hence will be
0 when the condition is invoked. This will cause if block to never
execute.
Change-Id: I9cd758674d13603087de013a0aea751032bc8603
CRs-Fixed: 957591
rssi_raw should not be updated when the channel
in probe response does not match the channel in BD.
Added rx_channel field to beacon descriptor passed from LIM to
CSR. Channel check is performed in csr_remove_dup_bss_description()
before computing new averaged rssi.
CRs-Fixed: 873549
Change-Id: Iefacbf73f880e9d0c957ad83839dd2203fdf862d
qcacld-2.0 to qcacld-3.0 propagation
Add raw rssi in the beacon header from WMI to beacon descriptor.
Pass it up to SME and report it to supplicant through a call to
wlan_hdd_cfg80211_inform_bss_frame().
It can be enabled as a .ini configuration parameter "gInformBssRssiRaw".
Default is 1, it will report raw rssi by default.
Roaming decisions are based on rssi field of beacon descriptor,
its interpretation and usage are unchanged.
CRs-Fixed: 815344
Change-Id: I6dacdc0b333c093d16a74f8cf36471dfc183ce56
Replace tSirMacAddr with cdf_mac_addr in tSmeIbssPeerInd and
tSirIbssPeerInactivityInd.
Change-Id: Ie83aa414e312431aeb7f730a3f8027ea960acc36
CRs-Fixed: 898864
Replace tSirMacAddr with cdf_mac_addr in sSmeMaxAssocInd and
tSirSmeGetAssocSTAsReq.
Change-Id: Ie36a22b5ee5c823833981b51ef91525f6c6af692
CRs-Fixed: 898864
qcacld-2.0 to qcacld-3.0 propagation
Currently while populating 11a and 11b rates, there is
no bound check for rateset array. This can result in buffer
overflow. As a part of fix add bound check to avoid any
buffer overflow for the rateset.
CRs-fixed: 798054
Change-Id: Ib42f5de642ad54d5c2a1ccdab37d88928b98af01
In LFR3 reassoc frame is sent by firmware and host or supplicant is not aware
of its content. Because of this supplicant does not have complete information
to perform EAP exchange with authenticator if fresh EAP exchange is requested.
To fix this:
1) Take the reassoc req frame passed by firmware and save that to pe session
This frame will then be passed to supplicant through usual path.
2) In case of FT connection, do not pass key replay counter attribute to
supplicant.
Change-Id: I51dd8004c910b45c7f25e9cd140448e592b096b3
CRs-Fixed: 943711
qcacld-2.0 to qcacld-3.0 propagation.
This fix ensures that a response message is sent back to SME if
a DelBSS/DelSta failure is returned by firmware, without which SME
command can get stuck.
Change-Id: I42425809ef93d447af0b34aee05e601e30a18ccc
CRs-Fixed: 810491
qcacld-2.0 to qcacld-3.0 propagation
The firmware reports the Enhanced Green AP (EGAP) service
(EGAP_SERVICE) feature flag to indicate the support of EGAP
feature.
The EGAP is to offload the legacy Green AP feature to firmware
in order to aggressively enable the Green AP other than wait
for host control latency.
Add the knob to hold the EGAP infomation when firmware support
it, also populate the information up to hdd target config.
And then add a SME interface to allow hdd layer to configure
the EGAP configuration.
Change-Id: I9be927369e7cf07731f8e9ba49d65224e05c340b
CRs-fixed: 929063
qcacld-2.0 to qcacld-3.0 propagation
The preauth session is not deleted if the deauth is from host
(eCsrForcedDeauth).
Adds the check to delete the preauth session and stop the
preAuthReassocIntvlTimer timer, in case of deauth from host.
Change-Id: I181344b0f3a41ff5c3a77f30b4c8cf80557c23b5
CRs-fixed: 649521
qcacld-2.0 to qcacld-3.0 propagation
In limSendSmeJoinReassocRsp API, assoc req, assoc rsp, ricData, tspecIes
are sent to SME layer if corresponding pointer in psessionEntry is
not NULL. There is bug here where the pointer is NULL but the length is
non zero. Because of this data is copied at incorrect offset and data
at SME layer is not at right offset leading to corrupted IE in
next re-assoc request.
Fix this by making length as zero whenever we free the data.
Change-Id: I4ba4ff49e56bc2f2758d869eae8ff9370b0c0489
CRs-Fixed: 932712
qcacld-2.0 to qcacld-3.0 propagation
As a part of logging enhancement,to make logs more
interactive, changed pmcstate,scanType etc from
numerical values to human readable string in
Protocol stack.
Change-Id: I589088c2c5fd0afa106a1d0773a2ff525b0dd083
CRs-Fixed: 638916
qcacld-2.0 to qcacld-3.0 propagation
Currently for sta mode while sending management
frames such as auth, assoc, reasssoc,deauth,
diassoc driver sends selfStaId. This results
in frames going on the air with the self data
rate and not the data rate supported by peer.
As a part of fix, make sure that the peerStaId is
used for sending above management frames.
Change-Id: Ia368ff13aed1002600f5fb3ad55c3d20106d586a
CRs-Fixed: 826260
qcacld-2.0 to qcacld-3.0 propagation
Even though ADD_BSS fails the driver tries to send DEL BSS to
firmware which will crash upon receiving DEL BSS.
To avoid this crash do not send DEL BSS to Firmware if ADD BSS
fails and just do cleanup.
Change-Id: Ieabf241c8277ae76bb5f491f9d8a2b783d8ea47e
CRs-Fixed: 929249
Qcacld-2.0 to qcacld-3.0 propagation.
This fix contains the following changes
1. Ensure rx mgmt packet is freed in all cases.
2. Fail preauth if the pre-auth response timer
failed to start.
3. Correct some logging and remove unnecessary code.
Change-Id: Icd3a12ba8878de5bad7ff1125ba8be123dfae4eb
CRs-Fixed: 808756
Check if PE session passed to pe_delete_session is valid
before proceeding with the deletion.
Change-Id: Icfe54e8bc286f14ea757b0619c067cc74ce87492
CRs-Fixed: 948924
Initialize PMF comeback timer in PE create session.
Currenlty PMF comeback timer is initialized in join request and
destroyed in delete session. In offload cases, PE session is
created without join request resulting in destruction of timer
which was not initialized. Add timer initialization in
pe_create_session.
Change-Id: I3dba6713b2bf64cc69f0f2d8322293ff763c0989
CRs-Fixed: 948924
qcacld-2.0 to qcacld-3.0 propagation.
Log the RSSI info of the disconnect if the STA disconnection is
due to STA kick out event from FW.
Change-Id: I0fad3f8d0e7990f4211b7840bed7605a4b97f3cb
CRs-Fixed: 874197
qcacld-2.0 to qcacld-3.0 propagation.
Ignore HT IE change if RoC is in progress because as
part of HT IE change we will try to change the channel
parameters which use the same callback as RoC. So if
we try to change the channel parameters if RoC is in
progress we will overwrite the callback causing problems
in the upper layers which are expecting a notification.
Change-Id: I6bace6dd2bd40728ece94e3efe59f3e7038a4e6a
CRs-Fixed: 710027
Check for VHT caps in vendor specific IE only if the dot11mode
is set to 11ac or auto, so that the vht caps are included in
association reuest frame only if the dot11 mode is 11ac.
Change-Id: If72117e5a46a754ae602dabd596a2ad8aac33d2e
CRs-Fixed: 952134
qcacld-2.0 to qcacld-3.0 propagation.
WMM should be enabled if HT caps are present even if WMM ie is
not present in beacons/probe response frames. In few places it
is not taken care. This commit will address the issue.
CRs-fixed: 873761
Change-Id: I985b7721fc28c9b7d087123c6cff9d76f93696d5
qcacld-2.0 to qcacld-3.0 propagation.
Send tdls mgmt frames with VI tid to give more priority
to tdls mgmt frames.
CRs-Fixed: 873749
Change-Id: I9196680f09678185c1010b472851c1aca00b1635
qcacld-2.0 to qcacld-3.0 propagation.
FW checks the peer Rx LDPC capability in ht and vht capabilities
to do Tx LPDC. But host sets the Tx LPDC flag in peer_flags.
To disable Tx LDPC reset the Rx LDPC capability in peer ht
and vht caps based on Tx LPDC configuration in INI.
Change-Id: I211fd73fd70a35faaf4cfc2c5dc8d842c7ff1e5a
CRs-Fixed: 894306
