Commit Graph

184 Commits

Author SHA1 Message Date
Dave Airlie
e8d6d61586 Merge remote branch 'korg/drm-radeon-testing' into drm-testing 2010-01-08 13:29:53 +10:00
Alex Deucher
7970e677ac drm: Add eDP connector type
Add a new connector type for eDP (embedded displayport)

eDP is more or less the same as DP but there are some
cases when you might want to handle it separately.

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-08 13:04:04 +10:00
Zhenyu Wang
e6be8d9d17 drm: remove address mask param for drm_pci_alloc()
drm_pci_alloc() has input of address mask for setting pci dma
mask on the device, which should be properly setup by drm driver.
And leave it as a param for drm_pci_alloc() would cause confusion
or mistake would corrupt the correct dma mask setting, as seen on
intel hw which set wrong dma mask for hw status page. So remove
it from drm_pci_alloc() function.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-01-07 13:15:50 +10:00
Arnd Bergmann
ed8b670409 drm: convert drm_ioctl to unlocked_ioctl
drm_ioctl is called with the Big Kernel Lock held,
which shows up very high in statistics on vfs_ioctl.

Moving the lock into the drm_ioctl function itself
makes sure we blame the right subsystem and it gets
us one step closer to eliminating the locked version
of fops->ioctl.

Since drm_ioctl does not require the lock itself,
we only need to hold it while calling the specific
handler. The 32 bit conversion handlers do not
interact with any other code, so they don't need
the BKL here either and can just call drm_ioctl.

As a bonus, this cleans up all the other users
of drm_ioctl which now no longer have to find
the inode or call lock_kernel.

[airlied: squashed the non-driver bits
of the second patch in here, this provides
the flag for drivers to use to select unlocked
ioctls - but doesn't modify any drivers].

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: David Airlie <airlied@linux.ie>
Cc: dri-devel@lists.sourceforge.net
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-18 11:22:31 +10:00
Dave Airlie
cbc8cc049a Merge remote branch 'korg/drm-vmware-staging' into drm-core-next 2009-12-18 09:53:50 +10:00
Jakob Bornecrantz
fb1d9738ca drm/vmwgfx: Add DRM driver for VMware Virtual GPU
This commit adds the vmwgfx driver for the VWware Virtual GPU aka SVGA.
The driver is under staging the same as Nouveau and Radeon KMS. Hopefully
the 2D ioctls are bug free and don't need changing, so that part of the
API should be stable. But there there is a pretty big chance that the 3D API
will change in the future.

Signed-off-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-15 08:38:43 +10:00
Jakob Bornecrantz
be1cb8689c drm/ttm: Add more driver type enums
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-15 08:38:18 +10:00
Ben Skeggs
6ee738610f drm/nouveau: Add DRM driver for NVIDIA GPUs
This adds a drm/kms staging non-API stable driver for GPUs from NVIDIA.

This driver is a KMS-based driver and requires a compatible nouveau
userspace libdrm and nouveau X.org driver.

This driver requires firmware files not available in this kernel tree,
interested parties can find them via the nouveau project git archive.

This driver is reverse engineered, and is in no way supported by nVidia.

Support for nearly the complete range of nvidia hw from nv04->g80 (nv50)
is available, and the kms driver should support driving nearly all
output types (displayport is under development still) along with supporting
suspend/resume.

This work is all from the upstream nouveau project found at
nouveau.freedesktop.org.

The original authors list from nouveau git tree is:
Anssi Hannula <anssi.hannula@iki.fi>
Ben Skeggs <bskeggs@redhat.com>
Francisco Jerez <currojerez@riseup.net>
Maarten Maathuis <madman2003@gmail.com>
Marcin Kościelnicki <koriakin@0x04.net>
Matthew Garrett <mjg@redhat.com>
Matt Parnell <mparnell@gmail.com>
Patrice Mandin <patmandin@gmail.com>
Pekka Paalanen <pq@iki.fi>
Xavier Chantry <shiningxc@gmail.com>
along with project founder Stephane Marchesin <marchesin@icps.u-strasbg.fr>

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 21:29:34 +10:00
Jerome Glisse
09855acb1c drm/ttm: Convert ttm_buffer_object_init to use ttm_placement
Convert ttm_buffer_object_init to use struct ttm_placement and
rename to ttm_bo_init for consistency with function naming. This
allow to give more complex placement at buffer creation. For
instance you ask to allocate bo into vram first but if there is
not enough vram you can give system as a second possible
placement. It also allow to create buffer in a specific range.

Also rename ttm_buffer_object_validate to ttm_bo_validate.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-11 14:09:05 +10:00
Jerome Glisse
99d7e48e8c drm: Add memory manager debug function
drm_mm_debug_table will print the memory manager state
in table allowing to give a snapshot of the manager at
given point in time. Usefull for debugging.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:28:06 +10:00
Thomas Hellstrom
98ffc4158e drm/ttm: Have the TTM code return -ERESTARTSYS instead of -ERESTART.
Return -ERESTARTSYS instead of -ERESTART when interrupted by a signal.
The -ERESTARTSYS is converted to an -EINTR by the kernel signal layer
before returned to user-space.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:03 +10:00
Jerome Glisse
ca262a9998 drm/ttm: Rework validation & memory space allocation (V3)
This change allow driver to pass sorted memory placement,
from most prefered placement to least prefered placement.
In order to avoid long function prototype a structure is
used to gather memory placement informations such as range
restriction (if you need a buffer to be in given range).
Range restriction is determined by fpfn & lpfn which are
the first page and last page number btw which allocation
can happen. If those fields are set to 0 ttm will assume
buffer can be put anywhere in the address space (thus it
avoids putting a burden on the driver to always properly
set those fields).

This patch also factor few functions like evicting first
entry of lru list or getting a memory space. This avoid
code duplication.

V2: Change API to use placement flags and array instead
    of packing placement order into a quadword.
V3: Make sure we set the appropriate mem.placement flag
    when validating or allocation memory space.

[Pending Thomas Hellstrom further review but okay
from preliminary review so far].

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:02 +10:00
Jerome Glisse
a2e68e92d3 drm: Add search/get functions to get a block in a specific range
These are required for changes to TTM.

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-10 15:09:01 +10:00
Dave Airlie
7b0a9e8302 Merge remote branch 'korg/drm-radeon-dp' into drm-linus
This merges the radeon KMS DisplayPort and hotplug detect support.

Tested on RV635 DP card with a Dell 2408 monitor.

Conflicts:
	drivers/gpu/drm/drm_fb_helper.c
2009-12-08 14:29:15 +10:00
Dave Airlie
3ff99164f6 Merge remote branch 'anholt/drm-intel-next' into drm-linus
This merges the upstream Intel tree and fixes up numerous conflicts
due to patches merged into Linus tree later in -rc cycle.

Conflicts:
	drivers/char/agp/intel-agp.c
	drivers/gpu/drm/drm_dp_i2c_helper.c
	drivers/gpu/drm/i915/i915_irq.c
	drivers/gpu/drm/i915/i915_suspend.c
2009-12-08 14:03:47 +10:00
Alex Deucher
5801ead6bd drm/radeon/kms: add support for DP modesetting
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:44 +10:00
Alex Deucher
1a66c95a64 drm/radeon/kms: DP fixes and cleanup from the ddx
- dpcp -> dpcd
- fix up dig encoder routing
- aux transaction table takes delay in 10 usec units

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:40 +10:00
Dave Airlie
746c1aa4d1 drm/radeon/kms: initial radeon displayport porting
This is enough to retrieve EDID and DPCP.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 10:22:31 +10:00
Dave Airlie
ab2c067298 drm/intel: refactor DP i2c support and DP common header to drm helper
Both radeon and nouveau can re-use this code so move it up a level
so they can. However the hw interfaces for aux ch are different
enough that the code to translate from mode, address, bytes
to actual hw interfaces isn't generic, so move that code into the
Intel driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-08 09:24:23 +10:00
Thomas Hellstrom
4bfd75cb08 drm/ttm: Export symbols needed for the vmwgfx driver.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:07 +10:00
Thomas Hellstrom
c078aa2fc4 drm/ttm: Add TTM execbuf utilities.
Utilities to reserve, unreserve and fence a list of TTM
buffer objects in a deadlock-safe manner.

Used by the vmwgfx driver.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:05 +10:00
Thomas Hellstrom
4aff1013f5 drm/ttm: Add ttm lock functionality.
This is intended to be used by ttm-aware drivers to
1) Block clients to inactive masters when
they try to validate buffers for GPU use.
2) Optionally block clients to the current master when
there is thrashing due to GPU memory shortage.

Used by the vmwgfx driver.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:03 +10:00
Thomas Hellstrom
88071539a3 drm/ttm: Add user-space objects.
Add objects needed for user-space to maintain reference counts on ttm objects.
This is used by the vmwgfx driver which allows user-space to maintain
map-counts on dma buffers, lock-counts on the ttm lock and ref-counts on
gpu surfaces, gpu contexts and dma buffer.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-07 15:22:01 +10:00
Jakob Bornecrantz
884840aa3c drm: Add dirty ioctl and property
This commit adds a ioctl and property to allow userspace
to notify the kernel that a framebuffer has changed. Instead
of snooping the command stream this allows finer grained
tracking of which areas have changed.

The primary user for this functionality is virtual hardware
like the vmware svga device, but also Xen hardware likes to
be notify. There is also real hardware like DisplayLink and
DisplayPort that might take advantage of this ioctl.

Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 09:25:47 +10:00
Martin Michlmayr
c3a73ba13b drm/ttm: Fix build failure due to missing struct page
drm/ttm fails to build on MIPS because "struct page" is not known:
| In file included from drivers/gpu/drm/ttm/ttm_memory.c:28:
| include/drm/ttm/ttm_memory.h:154: warning: 'struct page' declared inside parameter list
| include/drm/ttm/ttm_memory.h:154: warning: its scope is only this definition or declaration, which is probably not what you want
| include/drm/ttm/ttm_memory.h:156: warning: 'struct page' declared inside parameter list
| drivers/gpu/drm/ttm/ttm_memory.c:540: error: conflicting types for 'ttm_mem_global_alloc_page'
| include/drm/ttm/ttm_memory.h:154: error: previous declaration of 'ttm_mem_global_alloc_page' was here
| drivers/gpu/drm/ttm/ttm_memory.c:561: error: conflicting types for 'ttm_mem_global_free_page'
| include/drm/ttm/ttm_memory.h:156: error: previous declaration of 'ttm_mem_global_free_page' was here

Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Cc: stable@kernel.org
Acked-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 09:11:16 +10:00
Kristian Høgsberg
1a95916f54 drm: Add compatibility #ifdefs for *BSD
This let's use use the linux drm headers as the canonical source for
libdrm on all platforms.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:59:28 +10:00
Thomas Hellstrom
862302ffe4 drm: Add support for drm master_[set|drop] callbacks.
The vmwgfx driver has a per master rw lock around TTM, to guarantee 
mutual exclusion when needed.

This is typically when all evictable buffers are evicted due to

1) vt switch
2) master switch
3) suspend / resume.

In the multi-master case, on master switch the new master takes the 
previously active master lock in write mode, and then evicts all 
buffers. Any clients to previous masters will then block on that lock 
when trying to validate a buffer. fbdev also acts as a virtual master
wrt this.

Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Jakob Bornecrantz <jakob@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:55:46 +10:00
Adam Jackson
9340d8cfea drm/edid: Decode 3-byte CVT codes from EDID 1.4
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:47 +10:00
Adam Jackson
2dbdc52c81 drm/edid: Add new detailed block types from EDID 1.4
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:40 +10:00
Adam Jackson
7ac96a9cb4 drm/modes: Add drm_mode_hsync()
Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-12-04 08:53:22 +10:00
Kristian Høgsberg
04b2d21800 drm/i915: Fix typo in ioctl struct name.
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 10:29:47 -08:00
Li Peng
778c902640 drm/i915: Fix sync to vblank when VGA output is turned off
In current vblank-wait implementation, if we turn off VGA output,
drm_wait_vblank will still wait on the disabled pipe until timeout,
because vblank on the pipe is assumed be enabled. This would cause
slow system response on some system such as moblin.

This patch resolve the issue by adding a drm helper function
drm_vblank_off which explicitly clear vblank_enabled[crtc], wake up
any waiting queue and save last vblank counter before turning off
crtc. It also slightly change drm_vblank_get to ensure that we will
will return immediately if trying to wait on a disabled pipe.

Signed-off-by: Li Peng <peng.li@intel.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
[anholt: hand-applied for conflicts with overlay changes]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 10:27:40 -08:00
Jesse Barnes
e9560f7cb2 drm/i915: add GETPARAM request for page flipping
Add a GETPARAM request for checking if page flipping is supported.
Useful for the 2D driver to enable the flipping path.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-12-01 09:19:07 -08:00
Jesse Barnes
7bd4d7be5c drm: use page flip event to signal flip completion
We don't actually know which frame number the flip will complete on, so
userspace needs a specific flip notification to tell it when the last flip
completed.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Acked-by: Kristian Høgsberg <krh@bitplanet.net>
2009-12-01 09:11:53 -08:00
Eric Anholt
f40d6817a5 Merge remote branch 'airlied/drm-next' into drm-intel-next 2009-12-01 09:01:54 -08:00
Eric Anholt
c8e0f93a38 drm/i915: Replace a calloc followed by copying data over it with malloc.
Execbufs involve quite a bit of payload, to the extent that cache misses
show up in the profiles here, and a suspicion that some of those cachelines
may get evicted and then reloaded in the subsequent copy.

This is still abstracted like drm_calloc_large since we want to check for
size overflow, and because we want to choose between kmalloc and vmalloc
on the fly.  cairo's interface for malloc-with-calloc's-args was used as
the model.

Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-25 06:36:21 -08:00
Clemens Ladisch
7a654158bd drm: set the type of the drm_framebuffer::fbdev field
The fbdev field of the drm_framebuffer structure is always used to store
a pointer to a fb_info, so there is no reason for it to be void*.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-19 13:02:49 +10:00
Kristian Høgsberg
d91d8a3f88 drm/kms: add page flipping ioctl
This adds a page flipping ioctl to the KMS API.  The ioctl takes an fb ID
and a ctrc ID and flips the crtc to the given fb at the next vblank.
The ioctl returns immediately but the flip doesn't happen until after
any rendering that's currently queued up against the new framebuffer
is done.  After submitting a page flip, any execbuffer involving the
old front buffer will block until the flip is completed.

Optionally, a vblank event can be generated when the swap eventually
happens.

Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:05:47 +10:00
Andres Salomon
156822f717 drm: kill more unused DRM macros
There are a few more macros in drmP.h that are unused; DRM_GET_PRIV_SAREA,
DRM_ARRAY_SIZE, and DRM_WAITCOUNT can go away completely.

Unfortunately, DRM_COPY is still used in one place, but we can at least
move it to where it's used.  It's an awful looking macro..

[akpm: fix overeagerness]
Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:02:49 +10:00
Andres Salomon
420a457088 drm: kill some unused DRM_PROC macros from drmP.h
i915_gem_proc.c appears to have been the last user of the DRM_PROC_*
macros, and it has gone away.  The macros should die as well.

Signed-off-by: Andres Salomon <dilinger@collabora.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:02:49 +10:00
Kristian Høgsberg
c9a9c5e02a drm: Add async event synchronization for drmWaitVblank
This patch adds a new flag to the drmWaitVblank ioctl, which asks the drm
to return immediately and notify userspace when the specified vblank sequence
happens by sending an event back on the drm fd.

The event mechanism works with the other flags supported by the ioctls,
specifically, the vblank sequence can be specified relatively or absolutely,
and works for primary and seconday crtc.

The signal field of the vblank request is used to provide user data,
which will be sent back to user space in the vblank event.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-11-18 10:02:47 +10:00
Eric Anholt
5b8f0be0dc Merge remote branch 'airlied/drm-next' into drm-intel-next 2009-11-05 15:04:06 -08:00
Daniel Vetter
02e792fbaa drm/i915: implement drmmode overlay support v4
This implements intel overlay support for kms via a device-specific
ioctl. Thomas Hellstrom brought up the idea of a general ioctl (on
dri-devel). We've reached the conclusion that such an infrastructure
only makes sense when multiple kms overlay implementations exists,
which atm don't (and it doesn't look like this is gonna change).

Open issues:
- Runs in sync with the gpu, i.e. unnecessary waiting. I've decided
  to wait on this because the hw tends to hang when changing something
  in this area. I left some dummy functions as infrastructure.
- polyphase filtering uses a static table.
- uses uninterruptible sleeps. Unfortunately the alternatives may
  unnecessarily wedged the hw if/when we timeout too early (and
  userspace only overloaded the batch buffers with stuff worth a few
  secs of gpu time).

Changes since v1:
- fix off-by-one misconception on my side. This fixes fullscreen
  playback.
Changes since v2:
- add underrun detection as spec'ed for i965.
- flush caches properly, fixing visual corruptions.
Changes since v4:
- fix up cache flushing of overlay memory regs.
- killed require_pipe_a logic - it hangs the chip.

Tested-By: diego.abelenda@gmail.com (on a 865G)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[anholt: Resolved against the MADVISE ioctl going in before this one]
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:47:08 -08:00
Daniel Vetter
48764bf43f drm/i915: add i915_lp_ring_sync helper
This just waits until the hw passed the current ring position with
cmd execution. This slightly changes the existing i915_wait_request
function to make uninterruptible waiting possible - no point in
returning to userspace while mucking around with the overlay, that
piece of hw is just too fragile.

Also replace a magic 0 with the symbolic constant (and kill the then
superflous comment) while I was looking at the code.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:47:07 -08:00
Daniel Vetter
7a9c906094 drm: make drm_mode_object_find typesafe
I've wasted half a day hunting a bug that could easily be spotted by
gcc. Prevent this from reoccurring.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
2009-11-05 14:47:06 -08:00
Kristian Høgsberg
c182be37ed drm: Add async event synchronization for drmWaitVblank
This patch adds a new flag to the drmWaitVblank ioctl, which asks the drm
to return immediately and notify userspace when the specified vblank sequence
happens by sending an event back on the drm fd.

The event mechanism works with the other flags supported by the ioctls,
specifically, the vblank sequence can be specified relatively or absolutely,
and works for primary and seconday crtc.

The signal field of the vblank request is used to provide user data,
which will be sent back to user space in the vblank event.

Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-26 13:29:27 +10:00
Dave Airlie
c1176d6f03 Merge branch 'drm-next' of ../drm-next into drm-linus
conflict in radeon since new init path merged with vga arb code.

Conflicts:
	drivers/gpu/drm/radeon/radeon.h
	drivers/gpu/drm/radeon/radeon_asic.h
	drivers/gpu/drm/radeon/radeon_device.c
2009-10-08 14:03:05 +10:00
Dave Airlie
b8c00ac5b5 drm/fb: add more correct 8/16/24/32 bpp fb support.
The previous patches had some unwanted side effects, I've fixed
the lack of 32bpp working, and fixed up 16bpp so it should also work.

this also adds the interface to allow the driver to set a preferred
console depth so for example low memory rn50 can set it to 8bpp.
It also catches 24bpp on cards that can't do it and forces 32bpp.

Tested on r100/r600/i945.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-06 13:54:01 +10:00
Dave Airlie
068143d388 drm/fb: add setcmap and fix 8-bit support.
This adds support for the setcmap api and fixes the 8bpp
support at least on radeon hardware. It adds a new load_lut
hook which can be called once the color map is setup.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05 10:00:59 +10:00
Dave Airlie
dfee5614e4 drm/radeon/kms: respect single crtc cards, only create one crtc. (v2)
Also add single crtc for RN50 chips.

changes in v2:
fix vblank init to respect single crtc flag
fix r100 mode bandwidth to respect single crtc flag

Signed-off-by: Dave Airlie <airlied@redhat.com>
2009-10-05 10:00:58 +10:00