Commit Graph

1802 Commits

Author SHA1 Message Date
Rafael J. Wysocki
f62795f1e8 PCI PM: Follow PCI_PM_CTRL_NO_SOFT_RESET during transitions from D3
According to the PCI PM specification (PCI Bus Power Management
Interface Specification, Rev. 1.2, Section 5.4.1) we are supposed to
reinitialize devices that have PCI_PM_CTRL_NO_SOFT_RESET clear during
all transitions from PCI_D3hot to PCI_D0, but we only do it if the
device's current_state field is equal to PCI_UNKNOWN.

This may lead to problems if a device with PCI_PM_CTRL_NO_SOFT_RESET
unset is put into PCI_D3hot at run time by its driver and
pci_set_power_state() is used to put it back into PCI_D0, because in
that case the device will remain uninitialized after
pci_set_power_state() has returned.  Prevent that from happening by
modifying pci_raw_set_power_state() to reinitialize devices with
PCI_PM_CTRL_NO_SOFT_RESET unset during all transitions from D3 to D0.

Cc: stable@kernel.org
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:20 -07:00
Yu Zhao
4d135dbee7 PCI: fix SR-IOV function dependency link problem
PCIe root complex integrated endpoint does not implement ARI, so this
kind of endpoint uses 3-bit function number. The function dependency
link of the integrated endpoint should be calculated using the device
number plus the value from function dependency link register.

Normal endpoint always implements ARI and the function dependency link
register contains 8-bit function number (i.e. `devfn' from software's
perspective).

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:20 -07:00
Alex Chiang
af4c5f985a PCI: eliminate redundant pci_stop_dev() call from pci_destroy_dev()
We always call pci_stop_bus_device before calling pci_destroy_dev.

Since pci_stop_bus_device calls pci_stop_dev, there is no need
for pci_destroy_dev to repeat the call.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:19 -07:00
Michael S. Tsirkin
57fbf52c86 PCI MSI: let drivers retry when not enough vectors
pci_enable_msix currently returns -EINVAL if you ask
for more vectors than supported by the device, which would
typically cause fallback to regular interrupts.

It's better to return the table size, making the driver retry
MSI-X with less vectors.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:18 -07:00
Shaohua Li
8e822df700 PCI: disable ASPM on VIA root-port-under-bridge configurations
VIA has a strange chipset, it has root port under a bridge. Disable ASPM
for such strange chipset.

Cc: stable@kernel.org
Tested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:18 -07:00
Alex Chiang
3b073eda95 PCI: remove deprecated pci_find_slot() interface
The last in-tree caller of pci_find_slot has been converted, so
let's get rid of this deprecated interface.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:16 -07:00
Alex Chiang
12a9da0fcb PCI Hotplug: cpqphp: don't use pci_find_slot()
Convert uses of pci_find_slot to modern API.

In the conversion sites, we end up calling pci_dev_put() right away.

This may seem like it misses the entire point of doing something like
pci_get_bus_and_slot(), since we drop the reference so soon, but it turns
out we don't actually do much with the returned pci_dev.

I plan on untangling cpqphp further, but clearly cpqphp never worried too
much about a properly refcounted pci_dev anyway. For now, this conversion
seems reasonable, as it gets rid of the last in-tree caller of pci_find_slot.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:16 -07:00
Alex Chiang
6d1e87daee PCI Hotplug: cpqphp: constify slot_name()
Eliminate this warning:
	warning: return discards qualifiers from pointer target type

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:15 -07:00
Alex Chiang
e3265ea364 PCI Hotplug: cpqphp: eliminate dead code - PCI_ScanBusNonBridge
I have no clue what the original intent here was, but the code as
written is useless.

The old dbg() statement above the old callsite might lead one to think
that at one point, there was supposed to be some recursion, but any
sense of sanity here has been lost to the ravages of time.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:15 -07:00
Alex Chiang
b019ee679a PCI Hotplug: cpqphp: clean up accesses to pcibios_get_irq_routing_table()
Instead of making multiple calls to pcibios_get_irq_routing_table, let's
just do it once and save the answer.

The reason we were making multiple calls is because we liked to calculate
its length and perform some loop over it. Instead of open-coding the length
calculation every time, provide it in an inline helper function.

Finally, since pci_print_IRQ_route() is used only for debug, let's only
do it when cpqhp_debug is set.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:14 -07:00
Alex Chiang
1d2e8b1c58 PCI Hotplug: cpqphp: refactor cpqhp_save_config
Handle an empty slot at the top of the loop, and continue early.

This allows us to un-indent the rest of the function by one level.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:13 -07:00
Alex Chiang
4aabb58e1f PCI Hotplug: cpqphp: style cleanups
Clean up style, whitespace in cpqphp_pci.c

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:13 -07:00
Alex Chiang
de86ae16d5 PCI Hotplug: cpqphp: refactor cpqphp_save_slot_config
Check for an empty slot, and return early if so.

This allows us to un-indent the rest of the function by one level.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:12 -07:00
Alex Chiang
1d3ecf1376 PCI Hotplug: cpqphp: clean up cpqphp_ctrl.c
Style and whitespace cleanups, no functional change.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:11 -07:00
Alex Chiang
867556fe74 PCI Hotplug: cpqphp: refactor cpqhp_probe
Apply DeMorgan's theorem:

	if ((pdev->revision > 2) || (vendor_id == PCI_VENDOR_ID_INTEL))

turns into

	if ((pdev->revision <= 2) && (vendor_id != PCI_VENDOR_ID_INTEL))

Now we can bail out early from the function if the controller is not
supported.

This allows us to un-indent the remainder of the function quite a bit and
make it much more readable.

Fix up some extra braces, and un-indent the 'case' labels in the switch
statement as per CodingStyle.

No functional change.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:11 -07:00
Alex Chiang
04225fe7e6 PCI Hotplug: cpqphp: eliminate stray braces
Clean up style and eliminate superfluous braces and parens.

No functional change.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:10 -07:00
Alex Chiang
b4d897a48d PCI Hotplug: cpqphp: remove useless prototypes in cpqphp_core.c
Impact: refactor

Refactor code to follow convention more closely and eliminate the need
for some useless prototypes.

No functional change.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:09 -07:00
Alex Chiang
86a58023e4 PCI Hotplug: cpqphp: obey 80 column convention in cpqphp.h
Clean up cpqphp.h to follow 80 column convention.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:09 -07:00
Alex Chiang
427438c61b PCI Hotplug: cpqphp: fix comment style
Fix up comments from C++ to C-style, wrapping if necessary, etc.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:08 -07:00
Alex Chiang
861fefbf55 PCI Hotplug: cpqphp: stray whitespace cleanups
Clean up all stray whitespace issues, such as trailing whitespace,
spaces before tabs, etc. and whatever else vim's c_space_errors
highlights in red.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:07 -07:00
Yinghai Lu
d09ee9687e PCI: improve resource allocation under transparent bridges
We could run out of space under under 4g, but devices under transparent
bridges can use 64bit resources, so keep trying on the parent bus until
we hit a non-transparent bridge.

Impact: better support for assigning unassigned resources

Reviewed-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:07 -07:00
Yinghai Lu
1f82de10d6 PCI/x86: don't assume prefetchable ranges are 64bit
We should not assign 64bit ranges to PCI devices that only take 32bit
prefetchable addresses.

Try to set IORESOURCE_MEM_64 in 64bit resource of pci_device/pci_bridge
and make the bus resource only have that bit set when all devices under
it support 64bit prefetchable memory.  Use that flag to allocate
resources from that range.

Reported-by: Yannick <yannick.roehlly@free.fr>
Reviewed-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:06 -07:00
Hidetoshi Seto
67b5db6502 PCI MSI: Define PCI_MSI_MASK_32/64
Impact: cleanup, improve readability

Define PCI_MSI_MASK_32/64 for 32/64bit devices, instead of using
implicit offset (-4), "PCI_MSI_MASK_BIT - 4" and "PCI_MSI_MASK_BIT".

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:06 -07:00
akpm@linux-foundation.org
64f039d3d7 PCI: ibmphp_core.c: fix warning due to missing module_exit()
drivers/pci/hotplug/ibmphp_core.c:1414: warning: `ibmphp_exit' defined but not used

Signed-off-by: Zhenwen Xu <helight.xu@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:05 -07:00
Greg Kroah-Hartman
ad4efa359d PCIE: remove driver_data direct access of struct device
In the near future, the driver core is going to not allow direct access
to the driver_data pointer in struct device.  Instead, the functions
dev_get_drvdata() and dev_set_drvdata() should be used.  These functions
have been around since the beginning, so are backwards compatible with
all older kernel versions.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:04 -07:00
Hidetoshi Seto
04846b5b81 PCI MSI: Remove unused/obsolete macros and definitions
Impact: cleanup, spec compliance

This patch does:

 - Remove unused msi/msix_enable/disable macros.
   User should use msi/msix_set_enable() functions instead.

 - Remove unused msix_mask/unmask/pending macros.
   These macros are useless because they are not based on any of
   the PCI Local Bus Specifications properly.
   It seems that they were written based on a draft of PCI spec,
   and that the draft was the MSI-X ECN that underwent membership
   review in September 2002.
   (* In the draft, the size of a entry in MSI-X table was 64bit,
      containing 32bit message data and DWORD aligned lower address
      plus a pending bit and a mask bit.(30+1+1bit)  The higher
      address was placed in MSI-X capability structure and shared
      by all entries.)

 - Remove PCI_MSIX_FLAGS_BITMASK.
   This definition also come from the draft ECN.

Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com>
Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-11 12:04:03 -07:00
Linus Torvalds
f0d5e12bd4 Merge branch 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (76 commits)
  x86, apic: Fix dummy apic read operation together with broken MP handling
  x86, apic: Restore irqs on fail paths
  x86: Print real IOAPIC version for x86-64
  x86: enable_update_mptable should be a macro
  sparseirq: Allow early irq_desc allocation
  x86, io-apic: Don't mark pin_programmed early
  x86, irq: don't call mp_config_acpi_gsi() if update_mptable is not enabled
  x86, irq: update_mptable needs pci_routeirq
  x86: don't call read_apic_id if !cpu_has_apic
  x86, apic: introduce io_apic_irq_attr
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix
  x86: read apic ID in the !acpi_lapic case
  x86: apic: Fixmap apic address even if apic disabled
  x86: display extended apic registers with print_local_APIC and cpu_debug code
  x86: read apic ID in the !acpi_lapic case
  x86: clean up and fix setup_clear/force_cpu_cap handling
  x86: apic: Check rev 3 fadt correctly for physical_apic bit
  x86/pci: update pirq_enable_irq() to setup io apic routing
  x86/acpi: move setup io apic routing out of CONFIG_ACPI scope
  x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
  ...
2009-06-10 15:25:41 -07:00
Yu Zhao
f79b1b146b PCI: use fixed-up device class when configuring device
The device class may be changed after the fixup, so re-read the class
value from pci_dev when configuring the device.  Otherwise some devices
such as JMicron SATA controller won't work.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Grant Grundler <grundler@parisc-linux.org>
Tested-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-06-04 11:29:43 +01:00
Ingo Molnar
3d58f48ba0 Merge branch 'linus' into irq/numa
Conflicts:
	arch/mips/sibyte/bcm1480/irq.c
	arch/mips/sibyte/sb1250/irq.c

Merge reason: we gathered a few conflicts plus update to latest upstream fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-06-01 21:06:21 +02:00
Benjamin Herrenschmidt
435462c6e6 Merge branch 'merge' into next 2009-05-29 13:54:52 +10:00
Alex Chiang
9d911d7903 PCI Hotplug: acpiphp: don't store a pci_dev in acpiphp_func
An oops can occur if a user attempts to use both PCI logical
hotplug and the ACPI physical hotplug driver (acpiphp) in this
sequence, where $slot/address == $device.

In other words, if acpiphp has claimed a PCI device, and that
device is logically removed, then acpiphp may oops when it
attempts to access it again.

	# echo 1 > /sys/bus/pci/devices/$device/remove
	# echo 0 > /sys/bus/pci/slots/$slot/power

Unable to handle kernel NULL pointer dereference (address 0000000000000000)
Call Trace:
 [<a000000100016390>] show_stack+0x50/0xa0
 [<a000000100016c60>] show_regs+0x820/0x860
 [<a00000010003b390>] die+0x190/0x2a0
 [<a000000100066a40>] ia64_do_page_fault+0x8e0/0xa40
 [<a00000010000c7a0>] ia64_native_leave_kernel+0x0/0x270
 [<a0000001003b2660>] pci_remove_bus_device+0x120/0x260
 [<a0000002060549f0>] acpiphp_disable_slot+0x410/0x540 [acpiphp]
 [<a0000002060505c0>] disable_slot+0xc0/0x120 [acpiphp]
 [<a0000002040d21c0>] power_write_file+0x1e0/0x2a0 [pci_hotplug]
 [<a0000001003bb820>] pci_slot_attr_store+0x60/0xa0
 [<a000000100240f70>] sysfs_write_file+0x230/0x2c0
 [<a000000100195750>] vfs_write+0x190/0x2e0
 [<a0000001001961a0>] sys_write+0x80/0x100
 [<a00000010000c600>] ia64_ret_from_syscall+0x0/0x20
 [<a000000000010720>] __kernel_syscall_via_break+0x0/0x20

The root cause of this oops is that the logical remove ("echo 1 >
/sys/bus/pci/devices/$device/remove") destroyed the pci_dev. The
pci_dev struct itself wasn't deallocated because acpiphp kept a
reference, but some of its fields became invalid.

acpiphp doesn't have any real reason to keep a pointer to a
pci_dev around. It can always derive it using pci_get_slot().

If a logical remove destroys the pci_dev, acpiphp won't find it
and is thus prevented from causing mischief.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-27 02:04:24 -07:00
Kumar Gala
cf6692c07a powerpc/pci: Cleanup some minor cruft
* Removed building setup-irq on ppc32, we don't use it anymore
* Remove duplicate prototype for setup_grackle() code that needs it
  gets it from <asm/grackle.h>
* Removed gratuitous pci_io_size type differences between ppc32/ppc64

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21 15:44:24 +10:00
Rafael J. Wysocki
b3bad72e49 PCI PM: Fix initialization and kexec breakage for some devices
Recent PCI PM changes introduced a bug that causes some devices to be
mishandled after kexec and during early initialization.  The failure
scenario in the kexec case is the following:

* Assume a PCI device is not power-manageable by the platform and has
  PCI_PM_CTRL_NO_SOFT_RESET set in PMCSR.
* The device is put into D3 before kexec (using the native PCI PM).
* After kexec, pci_setup_device() sets the device's power state to
  PCI_UNKNOWN.
* pci_set_power_state(dev, PCI_D0) is called by the device's driver.
* __pci_start_power_transition(dev, PCI_D0) is called and since the
  device is not power-manageable by the platform, it causes
  pci_update_current_state(dev, PCI_D0) to be called.  As a result
  the device's current_state field is updated to PCI_D3, in
  accordance with the contents of its PCI PM registers.
* pci_raw_set_power_state() is called and it changes the device power
  state to D0.  *However*, it should also call pci_restore_bars() to
  reinitialize the device, but it doesn't, because the device's
  current_state field has been modified earlier.

To prevent this from happening, modify pci_platform_power_transition()
so that it doesn't use pci_update_current_state() to update the
current_state field for devices that aren't power-manageable by the
platform.  Instead, this field should be updated directly for devices
that don't support the native PCI PM.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-19 15:26:07 -07:00
David S. Miller
bb803cfbec Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/scsi/fcoe/fcoe.c
2009-05-18 21:08:20 -07:00
Yu Zhao
93a23a7271 VT-d: support the device IOTLB
Enable the device IOTLB (i.e. ATS) for both the bare metal and KVM
environments.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-18 14:46:26 +01:00
Yu Zhao
9dd2fe8906 VT-d: cleanup iommu_flush_iotlb_psi and flush_unmaps
Make iommu_flush_iotlb_psi() and flush_unmaps() more readable.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-18 14:46:00 +01:00
Yu Zhao
6ba6c3a4ca VT-d: add device IOTLB invalidation support
Support device IOTLB invalidation to flush the translation cached
in the Endpoint.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-18 14:45:13 +01:00
Yu Zhao
aa5d2b515b VT-d: parse ATSR in DMA Remapping Reporting Structure
Parse the Root Port ATS Capability Reporting Structure in the DMA
Remapping Reporting Structure ACPI table.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-18 14:45:09 +01:00
Yu Zhao
e277d2fc79 PCI: handle Virtual Function ATS enabling
The SR-IOV spec requires that the Smallest Translation Unit and
the Invalidate Queue Depth fields in the Virtual Function ATS
capability are hardwired to 0. If a function is a Virtual Function,
then and set its Physical Function's STU before enabling the ATS.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-18 11:25:58 +01:00
Yu Zhao
302b4215da PCI: support the ATS capability
The PCIe ATS capability makes the Endpoint be able to request the
DMA address translation from the IOMMU and cache the translation
in the device side, thus alleviate IOMMU pressure and improve the
hardware performance in the I/O virtualization environment.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-18 11:25:54 +01:00
Yinghai Lu
e5198075c6 x86, apic: introduce io_apic_irq_attr
according to Ingo, io_apic irq-setup related functions have too many
parameters with a repetitive signature.

So reduce related funcs to get less params by passing a pointer
to a newly defined io_apic_irq_attr structure.

v2: io_apic_irq ==> irq_attr
    triggering ==> trigger

v3: add set_io_apic_irq_attr

[ Impact: cleanup ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
LKML-Reference: <4A08ACD3.2070401@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-18 08:38:55 +02:00
Linus Torvalds
72357d5955 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI MSI: Fix MSI-X with NIU cards
  PCI: Fix pci-e port driver slot_reset bad default return value
2009-05-15 16:47:55 -07:00
Chris Wright
dd7264355a intel-iommu: dmar_set_interrupt return error value
dmar_set_interrupt feigns success when arch_setup_dmar_msi
fails, return error value.

Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-14 16:07:37 +01:00
Cyrill Gorcunov
b5710ce92a x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector(), fix
Fix trivial typo in the drivers/pci/hotplug/ibmphp_core.c changes.

[ Impact: build fix ]

Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org>
CC: Yinghai Lu <yinghai@kernel.org>
Cc: eswierk@aristanetworks.com
LKML-Reference: <20090512145128.GA10220@lenovo>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 17:04:02 +02:00
Ingo Molnar
6cda3eb62e Merge branch 'x86/apic' into irq/numa
Merge reason: both topics modify the APIC code but were able to do it in
              parallel so far. An upcoming patch generates a conflict so
              merge them to avoid the conflict.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-12 12:17:36 +02:00
Matthew Wilcox
8d18101853 PCI MSI: Fix MSI-X with NIU cards
The NIU device refuses to allow accesses to MSI-X registers before MSI-X
is enabled.  This patch fixes the problem by moving the read of the mask
register to after MSI-X is enabled.

Reported-by: David S. Miller <davem@davemloft.net>
Tested-by: David S. Miller <davem@davemloft.net>
Reviewed-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-11 17:02:27 -07:00
David Woodhouse
fd18de50b9 intel-iommu: PAE memory corruption fix
PAGE_MASK is 0xFFFFF000 on i386 -- even with PAE.

So it's not sufficient to ensure that you use phys_addr_t or uint64_t
everywhere you handle physical addresses -- you also have to avoid using
the construct 'addr & PAGE_MASK', because that will strip the high 32
bits of the address.

This patch avoids that problem by using PHYSICAL_PAGE_MASK instead of
PAGE_MASK where appropriate. It leaves '& PAGE_MASK' in a few instances
that don't matter -- where it's being used on the virtual bus addresses
we're dishing out, which are 32-bit anyway.

Since PHYSICAL_PAGE_MASK is not present on other architectures, we have
to define it (to PAGE_MASK) if it's not already defined.

Maybe it would be better just to fix PAGE_MASK for i386/PAE?

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-11 07:51:01 -07:00
Yinghai Lu
e20c06fd69 x86/pci: add 4 more return parameters to IO_APIC_get_PCI_irq_vector()
To prepare those params for pcibios_irq_enable() to call setup_io_apic_routing().

[ Impact: extend function call API to prepare for new functionality ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
LKML-Reference: <4A01C406.2040303@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 10:35:09 +02:00
Ingo Molnar
7a309490da Merge commit 'v2.6.30-rc5' into x86/apic
Merge reason: this branch was on a .30-rc2 base - sync it up with
              all the latest fixes.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-11 09:50:02 +02:00
David Woodhouse
c416daa98a intel-iommu: Tidy up iommu->gcmd handling
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-10 20:32:37 +01:00
David Woodhouse
462b60f6cc intel-iommu: Fix tiny theoretical race in write-buffer flush.
In iommu_flush_write_buffer() we read iommu->gcmd before taking the
register_lock, and then we mask in the WBF bit and write it to the
register.

There is a tiny chance that something else could have _changed_
iommu->gcmd before we take the lock, but after we read it. So we could
be undoing that change.

Never actually going to have happened in practice, since nothing else
changes that register at runtime -- aside from the write-buffer flush
it's only ever touched at startup for enabling translation, etc.

But worth fixing anyway.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-10 20:18:18 +01:00
David Woodhouse
1f0ef2aa18 intel-iommu: Clean up handling of "caching mode" vs. IOTLB flushing.
As we just did for context cache flushing, clean up the logic around
whether we need to flush the iotlb or just the write-buffer, depending
on caching mode.

Fix the same bug in qi_flush_iotlb() that qi_flush_context() had -- it
isn't supposed to be returning an error; it's supposed to be returning a
flag which triggers a write-buffer flush.

Remove some superfluous conditional write-buffer flushes which could
never have happened because they weren't for non-present-to-present
mapping changes anyway.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-10 19:58:49 +01:00
David Woodhouse
4c25a2c1b9 intel-iommu: Clean up handling of "caching mode" vs. context flushing.
It really doesn't make a lot of sense to have some of the logic to
handle caching vs. non-caching mode duplicated in qi_flush_context() and
__iommu_flush_context(), while the return value indicates whether the
caller should take other action which depends on the same thing.

Especially since qi_flush_context() thought it was returning something
entirely different anyway.

This patch makes qi_flush_context() and __iommu_flush_context() both
return void, removes the 'non_present_entry_flush' argument and makes
the only call site which _set_ that argument to 1 do the right thing.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-10 19:49:52 +01:00
Yu Zhao
fa3b6dcd52 VT-d: fix invalid domain id for KVM context flush
The domain->id is a sequence number associated with the KVM guest
and should not be used for the context flush. This patch replaces
the domain->id with a proper id value for both bare metal and KVM.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Acked-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-10 15:55:09 +01:00
Alexander Duyck
dcb4ea2ea2 pci: update 82576 sr-iov quirk with latest device IDs
The current quirk doesn't include all 82576 device IDs.  This update
resolves that.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06 15:33:44 -07:00
Zhang, Yanmin
029091df01 PCI: Fix pci-e port driver slot_reset bad default return value
When an upstream port reports an AER error to root port, kernel
starts error recovery procedures. The default return value of
function pcie_portdrv_slot_reset is PCI_ERS_RESULT_NONE. If all
port service drivers of the downstream port under the upstream
port have no slot_reset method in pci_error_handlers, AER recovery
would stop without resume. Below patch against 2.6.30-rc3 fixes it.

Signed-off-by: Zhang Yanmin <yanmin.zhang@linux.intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-05-05 12:20:57 -07:00
Ingo Molnar
4420471f14 Merge branch 'x86/apic' into irq/numa
Conflicts:
	arch/x86/kernel/apic/io_apic.c

Merge reason: non-trivial interaction between ongoing work in io_apic.c
              and the NUMA migration feature in the irq tree.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-05-01 19:02:50 +02:00
Fenghua Yu
aed5d5f4c5 Fix !CONFIG_DMAR build failure introduced by Intel IOMMU Pass Through Support
This updated patch should fix the compiling errors and remove the extern
iommu_pass_through from drivers/pci/intel-iommu.c file.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-05-01 16:44:47 +01:00
Fenghua Yu
4ed0d3e6c6 Intel IOMMU Pass Through Support
The patch adds kernel parameter intel_iommu=pt to set up pass through
mode in context mapping entry. This disables DMAR in linux kernel; but
KVM still runs on VT-d and interrupt remapping still works.

In this mode, kernel uses swiotlb for DMA API functions but other VT-d
functionalities are enabled for KVM. KVM always uses multi level
translation page table in VT-d. By default, pass though mode is disabled
in kernel.

This is useful when people don't want to enable VT-d DMAR in kernel but
still want to use KVM and interrupt remapping for reasons like DMAR
performance concern or debug purpose.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Weidong Han <weidong@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-29 06:54:34 +01:00
Yinghai Lu
56b581ea95 irq: make ht irq_desc more numa aware
Try to get irq_desc on the same node as create_irq_nr().

[ Impact: optimization, make HT IRQs more NUMA-aware ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
LKML-Reference: <49F655B6.8020109@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:19 +02:00
Yinghai Lu
85ac16d033 x86/irq: change irq_desc_alloc() to take node instead of cpu
This simplifies the node awareness of the code. All our allocators
only deal with a NUMA node ID locality not with CPU ids anyway - so
there's no need to maintain (and transform) a CPU id all across the
IRq layer.

v2: keep move_irq_desc related

[ Impact: cleanup, prepare IRQ code to be NUMA-aware ]

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
LKML-Reference: <49F65536.2020300@kernel.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-28 12:21:17 +02:00
Yu Zhao
1b6b8ce2ac PCI: only save/restore existent registers in the PCIe capability
PCIe 1.1 base neither requires the endpoint to implement the entire
PCIe capability structure nor specifies default values of registers
that are not implemented by the device. So we only save and restore
registers that must be implemented by different device types if the
device PCIe capability version is 1.

PCIe 1.1 Capability Structure Expansion ECN and PCIe 2.0 requires
all registers in the PCIe capability to be either implemented or
hardwired to 0. Their PCIe capability version is 2.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 15:59:41 -07:00
Randy Dunlap
cffb2fafb7 docbooks: add/fix PCI kernel-doc
Add drivers/pci/*.c source files to DocBook/kernel-api.tmpl
and update those pci/*.c source files that need kernel-doc fixes.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 14:49:33 -07:00
Yinghai Lu
681bf59721 PCI: cleanup debug output resources
Remove outputs for 0 sized resources and indicate prefetchability.

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 14:49:25 -07:00
Matthew Wilcox
0bb1be3e30 x86/PCI: Move set_pci_bus_resources_arch_default into arch/x86
Commit 30a18d6c3f introduced a new
function to set the PCI bus resources.  Unfortunately, neither the
author, nor the committers seemed to know that we already have somewhere
to do that -- pcibios_fixup_bus().  This patch moves the hook (used only
by the K8 code) into x86-specific code where it should have been in the
first place.

Cc: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Matthew Wilcox <willy@linux.intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 13:57:36 -07:00
Thomas Renninger
162dedd39d PCI quirk: disable MSI on VIA VT3364 chipsets
Without this patch, Broadcom BCM5906 Ethernet controllers set up via MSI
cause the machine to hang.  Tejun agreed that the best is to blacklist
the whole chipset and after adding it, seeing the other VIA quirks
disabling MSI, this very much looks like the right way.

Cc: <stable@kernel.org>
Signed-off-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-22 13:53:03 -07:00
Weidong Han
03ea815506 x86, intr-remap: add option to disable interrupt remapping
Add option "nointremap" to disable interrupt remapping.

[ Impact: add new boot option ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: allen.m.kay@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1239957736-6161-5-git-send-email-weidong.han@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-19 10:21:54 +02:00
Weidong Han
937582382c x86, intr-remap: enable interrupt remapping early
Currently, when x2apic is not enabled, interrupt remapping
will be enabled in init_dmars(), where it is too late to remap
ioapic interrupts, that is, ioapic interrupts are really in
compatibility mode, not remappable mode.

This patch always enables interrupt remapping before ioapic
setup, it guarantees all interrupts will be remapped when
interrupt remapping is enabled. Thus it doesn't need to set
the compatibility interrupt bit.

[ Impact: refactor intr-remap init sequence, enable fuller remap mode ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
Acked-by: David Woodhouse <David.Woodhouse@intel.com>
Cc: iommu@lists.linux-foundation.org
Cc: allen.m.kay@intel.com
Cc: fenghua.yu@intel.com
LKML-Reference: <1239957736-6161-4-git-send-email-weidong.han@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-04-19 10:21:43 +02:00
Linus Torvalds
7b11428d37 Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  intel-iommu: Avoid panic() for DRHD at address zero.
  Intel-IOMMU Alignment Issue in dma_pte_clear_range()
2009-04-13 11:35:50 -07:00
David Woodhouse
e523b38e2f intel-iommu: Avoid panic() for DRHD at address zero.
If the BIOS does something obviously stupid, like claiming that the
registers for the IOMMU are at physical address zero, then print a nasty
message and abort, rather than trying to set up the IOMMU and then later
panicking.

It's becoming more and more obvious that trusting this stuff to the BIOS
was a mistake.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-10 22:27:48 -07:00
Linus Torvalds
8e2c4f2844 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  PCI: pci_slot: grab refcount on slot's bus
  PCI Hotplug: acpiphp: grab refcount on p2p subordinate bus
  PCI: allow PCI core hotplug to remove PCI root bus
  PCI: Fix oops in pci_vpd_truncate
  PCI: don't corrupt enable_cnt when doing manual resource alignment
  PCI: annotate pci_rescan_bus as __ref, not __devinit
  PCI-IOV: fix missing kernel-doc
  PCI: Setup disabled bridges even if buses are added
  PCI: SR-IOV quirk for Intel 82576 NIC
2009-04-07 11:24:19 -07:00
Yang Hongyang
284901a90a dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:11 -07:00
Yang Hongyang
6a35528a83 dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:10 -07:00
Anton Vorontsov
d407e32efe PCI: Fix oops in pci_vpd_truncate
pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might
happen:

  sky2 driver version 1.22
  Unable to handle kernel paging request for data at address 0x0000000c
  Faulting instruction address: 0xc01836fc
  Oops: Kernel access of bad area, sig: 11 [#1]
  [...]
  NIP [c01836fc] pci_vpd_truncate+0x38/0x40
  LR [c029be18] sky2_probe+0x14c/0x518
  Call Trace:
  [ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable)
  [ef82be20] [c018a11c] local_pci_probe+0x24/0x34
  [ef82be30] [c018a14c] pci_call_probe+0x20/0x30
  [ef82be50] [c018a330] __pci_device_probe+0x64/0x78
  [ef82be60] [c018a44c] pci_device_probe+0x30/0x58
  [ef82be80] [c01aa270] really_probe+0x78/0x1a0
  [ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8
  [ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c
  [ef82bef0] [c01aa0b4] driver_attach+0x24/0x34
  [ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc
  [ef82bf20] [c01aa87c] driver_register+0x6c/0x110
  [ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c
  [ef82bf50] [c03782c8] sky2_init_module+0x30/0x40
  [ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0
  [ef82bfd0] [c0362240] do_initcalls+0x38/0x58

This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so
pci_vpd_truncate() is called before late_initcall(pci_sysfs_init),
therefore ->attr isn't yet initialized.

Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:05:38 -07:00
Fenghua Yu
31d3568dfe Intel-IOMMU Alignment Issue in dma_pte_clear_range()
This issue was pointed out by Linus.

In dma_pte_clear_range() in intel-iommu.c

start = PAGE_ALIGN(start);
end &= PAGE_MASK;
npages = (end - start) / VTD_PAGE_SIZE;

In partial page case, start could be bigger than end and npages will be
negative.

Currently the issue doesn't show up as a real bug in because start and 
end have been aligned to page boundary already by all callers. So the 
issue has been hidden. But it is dangerous programming practice.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 14:47:00 -07:00
Linus Torvalds
ffa009c366 Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  drivers/pci/intr_remapping.c: include acpi.h
  intel-iommu: Fix oops in device_to_iommu() when devices not found.
  intel-iommu: Handle PCI domains appropriately.
  intel-iommu: Fix device-to-iommu mapping for PCI-PCI bridges.
  x2apic/intr-remap: decouple interrupt remapping from x2apic
  x86, dmar: check if it's initialized before disable queue invalidation
  intel-iommu: set compatibility format interrupt
  Intel IOMMU Suspend/Resume Support - Interrupt Remapping
  Intel IOMMU Suspend/Resume Support - Queued Invalidation
  Intel IOMMU Suspend/Resume Support - DMAR
  intel-iommu: Add for_each_iommu() and for_each_active_iommu() macros
2009-04-06 14:26:05 -07:00
Alexander Beregalov
46f06b7237 drivers/pci/intr_remapping.c: include acpi.h
Fix this build error:
drivers/pci/intr_remapping.c: In function 'ir_parse_ioapic_scope':
drivers/pci/intr_remapping.c:617: error: invalid use of undefined type
				         'struct acpi_dmar_hardware_unit'

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 13:45:48 -07:00
David Woodhouse
4958c5dc7b intel-iommu: Fix oops in device_to_iommu() when devices not found.
It's possible for a device in the drhd->devices[] array to be NULL if
it wasn't found at boot time, which means we have to check for that
case.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06 13:30:01 -07:00
Alex Chiang
5d4a4b25dd PCI Hotplug: acpiphp: grab refcount on p2p subordinate bus
If a logical hot unplug (remove) is performed on a bridge claimed
by acpiphp and then acpiphp is unloaded, we will encounter an oops.

This is because acpiphp will access the bridge's subordinate bus,
which was released by the user's prior hot unplug.

The solution is to grab a reference on the subordinate PCI bus.
This will prevent the bus from release until acpiphp is unloaded.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:30:26 -07:00
Alex Chiang
c2ac7cdc67 PCI: allow PCI core hotplug to remove PCI root bus
There is no reason to prevent removal of root bus devices. A subsequent
rescan will find them just fine.

Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:30:02 -07:00
Anton Vorontsov
d6141668c2 PCI: Fix oops in pci_vpd_truncate
pci_vpd_truncate() should check for dev->vpd->attr, otherwise
this might happen:

sky2 driver version 1.22
Unable to handle kernel paging request for data at address 0x0000000c
Faulting instruction address: 0xc01836fc
Oops: Kernel access of bad area, sig: 11 [#1]
[...]
NIP [c01836fc] pci_vpd_truncate+0x38/0x40
LR [c029be18] sky2_probe+0x14c/0x518
Call Trace:
[ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable)
[ef82be20] [c018a11c] local_pci_probe+0x24/0x34
[ef82be30] [c018a14c] pci_call_probe+0x20/0x30
[ef82be50] [c018a330] __pci_device_probe+0x64/0x78
[ef82be60] [c018a44c] pci_device_probe+0x30/0x58
[ef82be80] [c01aa270] really_probe+0x78/0x1a0
[ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8
[ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c
[ef82bef0] [c01aa0b4] driver_attach+0x24/0x34
[ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc
[ef82bf20] [c01aa87c] driver_register+0x6c/0x110
[ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c
[ef82bf50] [c03782c8] sky2_init_module+0x30/0x40
[ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0
[ef82bfd0] [c0362240] do_initcalls+0x38/0x58

This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so
pci_vpd_truncate() is called before late_initcall(pci_sysfs_init),
therefore ->attr isn't yet initialized.

Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:28:35 -07:00
Yuji Shimada
0cdbe30f0b PCI: don't corrupt enable_cnt when doing manual resource alignment
This patch fixes breakage of of enable_cnt in quirk_resource_alignment.

Currently, quirk_resource_alignment calls pci_disable_device.
pci_disable_device decrements enable_cnt, so that enable_cnt becomes -1.

The patch disables memory decoding, writing command register directly.
So enable_cnt is not broken.

Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:27:58 -07:00
Alex Chiang
5446a6bdb5 PCI: annotate pci_rescan_bus as __ref, not __devinit
pci_rescan_bus was annotated as __devinit, which is wrong,
because it will never be part of device initialization.
Howevever, we can't simply drop the annotation, because then we
get section warnings about calling pci_scan_child_bus (which is
correctly marked as __devinit).

pci_rescan_bus will only get built when CONFIG_HOTPLUG is set,
meaning that __devinit is a nop, so we know that pci_scan_child_bus
has not been freed.

Annotate as __ref to silence modpost.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:26:07 -07:00
Randy Dunlap
52a8873ba4 PCI-IOV: fix missing kernel-doc
Fix PCI iov kernel-doc warning:

Warning(drivers/pci/iov.c:638): No description found for parameter 'nr_virtfn'

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:25:33 -07:00
Yuji Shimada
296ccb086d PCI: Setup disabled bridges even if buses are added
This patch sets up disabled bridges even if buses have already been
added.

pci_assign_unassigned_resources is called after buses are added.
pci_assign_unassigned_resources calls pci_bus_assign_resources.
pci_bus_assign_resources calls pci_setup_bridge to configure BARs of
bridges.

Currently pci_setup_bridge returns immediately if the bus have already
been added. So pci_assign_unassigned_resources can't configure BARs of
bridges that were added in a disabled state; this patch fixes the issue.

On logical hot-add, we need to prevent the kernel from re-initializing
bridges that have already been initialized. To achieve this,
pci_setup_bridge returns immediately if the bridge have already been
enabled.

We don't need to check whether the specified bus is a root bus or not.
pci_setup_bridge is not called on a root bus, because a root bus does
not have a bridge.

The patch adds a new helper function, pci_is_enabled. I made the
function name similar to pci_is_managed. The codes which use
enable_cnt directly are changed to use pci_is_enabled.

Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:25:06 -07:00
Yu Zhao
7eb93b175d PCI: SR-IOV quirk for Intel 82576 NIC
If BIOS doesn't allocate resources for the SR-IOV BARs, zero the Flash
BAR and program the SR-IOV BARs to use the old Flash Memory Space.

Please refer to Intel 82576 Gigabit Ethernet Controller Datasheet
section 7.9.2.14.2 for details.
http://download.intel.com/design/network/datashts/82576_Datasheet.pdf

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06 11:21:40 -07:00
Linus Torvalds
32fb6c1756 Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits)
  ACPI: processor: use .notify method instead of installing handler directly
  ACPI: button: use .notify method instead of installing handler directly
  ACPI: support acpi_device_ops .notify methods
  toshiba-acpi: remove MAINTAINERS entry
  ACPI: battery: asynchronous init
  acer-wmi: Update copyright notice & documentation
  acer-wmi: Cleanup the failure cleanup handling
  acer-wmi: Blacklist Acer Aspire One
  video: build fix
  thinkpad-acpi: rework brightness support
  thinkpad-acpi: enhanced debugging messages for the fan subdriver
  thinkpad-acpi: enhanced debugging messages for the hotkey subdriver
  thinkpad-acpi: enhanced debugging messages for rfkill subdrivers
  thinkpad-acpi: restrict access to some firmware LEDs
  thinkpad-acpi: remove HKEY disable functionality
  thinkpad-acpi: add new debug helpers and warn of deprecated atts
  thinkpad-acpi: add missing log levels
  thinkpad-acpi: cleanup debug helpers
  thinkpad-acpi: documentation cleanup
  thinkpad-acpi: drop ibm-acpi alias
  ...
2009-04-05 11:16:25 -07:00
Linus Torvalds
90975ef712 Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits)
  cpumask: remove cpumask allocation from idle_balance, fix
  numa, cpumask: move numa_node_id default implementation to topology.h, fix
  cpumask: remove cpumask allocation from idle_balance
  x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus
  x86: cpumask: update 32-bit APM not to mug current->cpus_allowed
  x86: microcode: cleanup
  x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c
  cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash
  numa, cpumask: move numa_node_id default implementation to topology.h
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  cpumask: remove x86 cpumask_t uses.
  cpumask: use cpumask_var_t in uv_flush_tlb_others.
  cpumask: remove cpumask_t assignment from vector_allocation_domain()
  cpumask: make Xen use the new operators.
  cpumask: clean up summit's send_IPI functions
  cpumask: use new cpumask functions throughout x86
  x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask
  cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t
  cpumask: convert node_to_cpumask_map[] to cpumask_var_t
  x86: unify 32 and 64-bit node_to_cpumask_map
  ...
2009-04-05 10:33:07 -07:00
Len Brown
478c6a43fc Merge branch 'linus' into release
Conflicts:
	arch/x86/kernel/cpu/cpufreq/longhaul.c

Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-05 02:14:15 -04:00
David Woodhouse
276dbf9970 intel-iommu: Handle PCI domains appropriately.
We were comparing {bus,devfn} and assuming that a match meant it was the
same device. It doesn't -- the same {bus,devfn} can exist in
multiple PCI domains. Include domain number in device identification
(and call it 'segment' in most places, because there's already a lot of
references to 'domain' which means something else, and this code is
infected with ACPI thinking already).

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04 10:43:31 +01:00
David Woodhouse
924b6231ed intel-iommu: Fix device-to-iommu mapping for PCI-PCI bridges.
When the DMAR table identifies that a PCI-PCI bridge belongs to a given
IOMMU, that means that the bridge and all devices behind it should be
associated with the IOMMU. Not just the bridge itself.

This fixes the device_to_iommu() function accordingly.

(It's broken if you have the same PCI bus numbers in multiple domains,
but this function was always broken in that way; I'll be dealing with
that later).

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04 10:43:29 +01:00
Han, Weidong
d0b03bd1c6 x2apic/intr-remap: decouple interrupt remapping from x2apic
interrupt remapping must be enabled before enabling x2apic, but
interrupt remapping doesn't depend on x2apic, it can be used
separately. Enable interrupt remapping in init_dmars even x2apic
is not supported.

[dwmw2: Update Kconfig accordingly, fix build with INTR_REMAP && !X2APIC]

Signed-off-by: Weidong Han <weidong.han@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04 10:42:28 +01:00
Han, Weidong
34aaaa948e x86, dmar: check if it's initialized before disable queue invalidation
If queue invalidation is disabled after it's already initialized,
dmar_enable_qi won't re-enable it due to iommu->qi is allocated.
It may result in system hang when use queue invalidation. Add this
check to avoid this case.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04 10:41:32 +01:00
Linus Torvalds
811158b147 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits)
  trivial: Update my email address
  trivial: NULL noise: drivers/mtd/tests/mtd_*test.c
  trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h
  trivial: Fix misspelling of "Celsius".
  trivial: remove unused variable 'path' in alloc_file()
  trivial: fix a pdlfush -> pdflush typo in comment
  trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL
  trivial: wusb: Storage class should be before const qualifier
  trivial: drivers/char/bsr.c: Storage class should be before const qualifier
  trivial: h8300: Storage class should be before const qualifier
  trivial: fix where cgroup documentation is not correctly referred to
  trivial: Give the right path in Documentation example
  trivial: MTD: remove EOL from MODULE_DESCRIPTION
  trivial: Fix typo in bio_split()'s documentation
  trivial: PWM: fix of #endif comment
  trivial: fix typos/grammar errors in Kconfig texts
  trivial: Fix misspelling of firmware
  trivial: cgroups: documentation typo and spelling corrections
  trivial: Update contact info for Jochen Hein
  trivial: fix typo "resgister" -> "register"
  ...
2009-04-03 15:24:35 -07:00
Han, Weidong
161fde083f intel-iommu: set compatibility format interrupt
When extended interrupt mode (x2apic mode) is not supported in a
system, it must set compatibility format interrupt to bypass
interrupt remapping, otherwise compatibility format interrupts
will be blocked.

This will be used when interrupt remapping is enabled while x2apic
is not supported.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-03 21:46:01 +01:00
Fenghua Yu
b24696bc55 Intel IOMMU Suspend/Resume Support - Interrupt Remapping
This patch enables suspend/resume for interrupt remapping. During suspend,
interrupt remapping is disabled. When resume, interrupt remapping is enabled
again.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-03 21:45:59 +01:00
Fenghua Yu
eb4a52bc66 Intel IOMMU Suspend/Resume Support - Queued Invalidation
This patch supports queued invalidation suspend/resume.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-03 21:45:57 +01:00
Fenghua Yu
f59c7b69bc Intel IOMMU Suspend/Resume Support - DMAR
This patch implements the suspend and resume feature for Intel IOMMU
DMAR. It hooks to kernel suspend and resume interface. When suspend happens, it
saves necessary hardware registers. When resume happens, it restores the
registers and restarts IOMMU by enabling translation, setting up root entry, and
re-enabling queued invalidation.

Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-03 21:45:54 +01:00
Linus Torvalds
ca1ee219c0 Merge git://git.infradead.org/iommu-2.6
* git://git.infradead.org/iommu-2.6:
  intel-iommu: Fix address wrap on 32-bit kernel.
  intel-iommu: Enable DMAR on 32-bit kernel.
  intel-iommu: fix PCI device detach from virtual machine
  intel-iommu: VT-d page table to support snooping control bit
  iommu: Add domain_has_cap iommu_ops
  intel-iommu: Snooping control support

Fixed trivial conflicts in arch/x86/Kconfig and drivers/pci/intel-iommu.c
2009-04-03 10:36:57 -07:00
Linus Torvalds
e76e5b2c66 Merge branch 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6
* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits)
  PCI: fix HT MSI mapping fix
  PCI: don't enable too much HT MSI mapping
  x86/PCI: make pci=lastbus=255 work when acpi is on
  PCI: save and restore PCIe 2.0 registers
  PCI: update fakephp for bus_id removal
  PCI: fix kernel oops on bridge removal
  PCI: fix conflict between SR-IOV and config space sizing
  powerpc/PCI: include pci.h in powerpc MSI implementation
  PCI Hotplug: schedule fakephp for feature removal
  PCI Hotplug: rename legacy_fakephp to fakephp
  PCI Hotplug: restore fakephp interface with complete reimplementation
  PCI: Introduce /sys/bus/pci/devices/.../rescan
  PCI: Introduce /sys/bus/pci/devices/.../remove
  PCI: Introduce /sys/bus/pci/rescan
  PCI: Introduce pci_rescan_bus()
  PCI: do not enable bridges more than once
  PCI: do not initialize bridges more than once
  PCI: always scan child buses
  PCI: pci_scan_slot() returns newly found devices
  PCI: don't scan existing devices
  ...

Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
2009-04-01 09:47:12 -07:00
Rusty Russell
558f6ab910 Merge branch 'cpumask-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
Conflicts:

	arch/x86/include/asm/topology.h
	drivers/oprofile/buffer_sync.c
(Both cases: changed in Linus' tree, removed in Ingo's).
2009-03-31 13:33:50 +10:30
Linus Torvalds
53d8f67082 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
  PCI PM: Make pci_prepare_to_sleep() disable wake-up if needed
  radeonfb: Use __pci_complete_power_transition()
  PCI PM: Introduce __pci_[start|complete]_power_transition() (rev. 2)
  PCI PM: Restore config spaces of all devices during early resume
  PCI PM: Make pci_set_power_state() handle devices with no PM support
  PCI PM: Put devices into low power states during late suspend (rev. 2)
  PCI PM: Move pci_restore_standard_config to pci-driver.c
  PCI PM: Use pci_set_power_state during early resume
  PCI PM: Consistently use variable name "error" for pm call return values
  kexec: Change kexec jump code ordering
  PM: Change hibernation code ordering
  PM: Change suspend code ordering
  PM: Rework handling of interrupts during suspend-resume
  PM: Introduce functions for suspending and resuming device interrupts
2009-03-30 15:12:14 -07:00
Ingo Molnar
65fb0d23fc Merge branch 'linus' into cpumask-for-linus
Conflicts:
	arch/x86/kernel/cpu/common.c
2009-03-30 23:53:32 +02:00
Linus Torvalds
712b0006bf Merge branch 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits)
  dma-debug: make memory range checks more consistent
  dma-debug: warn of unmapping an invalid dma address
  dma-debug: fix dma_debug_add_bus() definition for !CONFIG_DMA_API_DEBUG
  dma-debug/x86: register pci bus for dma-debug leak detection
  dma-debug: add a check dma memory leaks
  dma-debug: add checks for kernel text and rodata
  dma-debug: print stacktrace of mapping path on unmap error
  dma-debug: Documentation update
  dma-debug: x86 architecture bindings
  dma-debug: add function to dump dma mappings
  dma-debug: add checks for sync_single_sg_*
  dma-debug: add checks for sync_single_range_*
  dma-debug: add checks for sync_single_*
  dma-debug: add checking for [alloc|free]_coherent
  dma-debug: add add checking for map/unmap_sg
  dma-debug: add checking for map/unmap_page/single
  dma-debug: add core checking functions
  dma-debug: add debugfs interface
  dma-debug: add kernel command line parameters
  dma-debug: add initialization code
  ...

Fix trivial conflicts due to whitespace changes in arch/x86/kernel/pci-nommu.c
2009-03-30 13:41:00 -07:00
Rafael J. Wysocki
8efb8c76fc PCI PM: Make pci_prepare_to_sleep() disable wake-up if needed
If the device is not supposed to wake up the system, ie. when
device_may_wakeup(&dev->dev) returns 'false', pci_prepare_to_sleep()
should pass 'false' to pci_enable_wake() so that it calls the
platform to disable the wake-up capability of the device.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 21:46:56 +02:00
Rafael J. Wysocki
0e5dd46b76 PCI PM: Introduce __pci_[start|complete]_power_transition() (rev. 2)
The radeonfb driver needs to program the device's PMCSR directly due
to some quirky hardware it has to handle (see
http://bugzilla.kernel.org/show_bug.cgi?id=12846 for details) and
after doing that it needs to call the platform (usually ACPI) to
finish the power transition of the device.  Currently it uses
pci_set_power_state() for this purpose, however making a specific
assumption about the internal behavior of this function, which has
changed recently so that this assumption is no longer satisfied.
For this reason, introduce __pci_complete_power_transition() that may
be called by the radeonfb driver to complete the power transition of
the device.  For symmetry, introduce __pci_start_power_transition().

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 21:46:56 +02:00
Rafael J. Wysocki
931ff68a5a PCI PM: Restore config spaces of all devices during early resume
At present the configuration spaces of PCI devices that have no
drivers or no PM support in the drivers (either legacy or through a
pm object) are not saved during suspend and, consequently, they are
not restored during resume.  This generally may lead to the state of
the system being slightly inconsistent after the resume, so it's
better to save and restore the configuration spaces of these devices
as well.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 21:46:56 +02:00
Rafael J. Wysocki
4a865905f6 PCI PM: Make pci_set_power_state() handle devices with no PM support
There is a problem with PCI devices without any PM support (either
native or through the platform) that pci_set_power_state() always
returns error code for them, even if they are being put into D0.
However, such devices are always in D0, so pci_set_power_state()
should return success when attempting to put such a device into D0.
It also should update the current_state field for these devices as
appropriate.  This modification is necessary so that the standard
configuration registers of these devices are successfully restored by
pci_restore_standard_config() during the "early" phase of resume.

In addition, pci_set_power_state() should check the value of
current_state before calling the platform to change the power state
of the device to avoid doing that unnecessarily.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 21:46:56 +02:00
Rafael J. Wysocki
46939f8b15 PCI PM: Put devices into low power states during late suspend (rev. 2)
Once we have allowed timer interrupts to be enabled during the late
phase of suspending devices, we are now able to use the generic
pci_set_power_state() to put PCI devices into low power states at
that time.  We can also use some related platform callbacks, like the
ones preparing devices for wake-up, during the late suspend.

Doing this will allow us to avoid the race condition where a device
using shared interrupts is put into a low power state with interrupts
enabled and then an interrupt (for another device) comes in and
confuses its driver.  At the same time, devices that don't support
the native PCI PM or that require some additional, platform-specific
operations to be carried out to put them into low power states will
be handled as appropriate.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 21:46:55 +02:00
Rafael J. Wysocki
0128a89cf7 PCI PM: Move pci_restore_standard_config to pci-driver.c
Move pci_restore_standard_config() from pci.c to pci-driver.c and
make it static.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 21:46:55 +02:00
Rafael J. Wysocki
f00a20ef46 PCI PM: Use pci_set_power_state during early resume
Once we have allowed timer interrupts to be enabled during the early
phase of resuming devices, we are now able to use the generic
pci_set_power_state() to put PCI devices into D0 at that time.  Then,
the platform-specific PM code will have a chance to handle devices
that don't implement the native PCI PM or that require some
additional, platform-specific operations to be carried out to power
them up.  Also, by doing this we can simplify the code quite a bit.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 21:46:55 +02:00
Frans Pop
57ef80266e PCI PM: Consistently use variable name "error" for pm call return values
I noticed two functions use a variable "i" to store the return value of PM
function calls while the rest of the file uses "error". As "i" normally
indicates a counter of some sort it seems better to keep this consistent.

Signed-off-by: Frans Pop <elendil@planet.nl>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-03-30 21:46:55 +02:00
Yinghai Lu
eeafda70bf PCI: fix HT MSI mapping fix
Impact: fix bug

This patch reworks the nv_msi_ht_cap_quirk() and will only try to avoid
to enable ht_msi on device following that root dev, and don't touch that
root dev, but only do that trick with end_device on the chain.

Reported-by: Prakash Punnoor <prakash@punnoor.de>
Tested-by: Prakash Punnoor <prakash@punnoor.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30 12:15:52 -07:00
Nick Andrew
877d03105d trivial: Fix misspelling of firmware
Fix misspelling of firmware.

Signed-off-by: Nick Andrew <nick@nick-andrew.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-30 15:21:59 +02:00
Ingo Molnar
b0d44c0dbb Merge branch 'linus' into core/iommu
Conflicts:
	arch/x86/Kconfig
2009-03-28 23:05:50 +01:00
Ingo Molnar
3fab191002 Merge branch 'linus' into x86/core 2009-03-28 22:27:45 +01:00
Ingo Molnar
6e15cf0486 Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2
Conflicts:
	arch/parisc/kernel/irq.c
	arch/x86/include/asm/fixmap_64.h
	arch/x86/include/asm/setup.h
	kernel/irq/handle.c

Semantic merge:
        arch/x86/include/asm/fixmap.h

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-27 17:28:43 +01:00
Yinghai Lu
de7453065d PCI: don't enable too much HT MSI mapping
Impact: fix bug

Prakash reported that his c51-mcp51 system ondie sound card doesn't work
MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with
sound card.

This patch reworks nv_msi_ht_cap_quirk() and will only avoid enabling
ht_msi on devices following that root device.

Reported-by: Prakash Punnoor <prakash@punnoor.de>
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-26 16:09:14 -07:00
Linus Torvalds
a8416961d3 Merge branch 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (32 commits)
  x86: disable __do_IRQ support
  sparseirq, powerpc/cell: fix unused variable warning in interrupt.c
  genirq: deprecate obsolete typedefs and defines
  genirq: deprecate __do_IRQ
  genirq: add doc to struct irqaction
  genirq: use kzalloc instead of explicit zero initialization
  genirq: make irqreturn_t an enum
  genirq: remove redundant if condition
  genirq: remove unused hw_irq_controller typedef
  irq: export remove_irq() and setup_irq() symbols
  irq: match remove_irq() args with setup_irq()
  irq: add remove_irq() for freeing of setup_irq() irqs
  genirq: assert that irq handlers are indeed running in hardirq context
  irq: name 'p' variables a bit better
  irq: further clean up the free_irq() code flow
  irq: refactor and clean up the free_irq() code flow
  irq: clean up manage.c
  irq: use GFP_KERNEL for action allocation in request_irq()
  kernel/irq: fix sparse warning: make symbol static
  irq: optimize init_kstat_irqs/init_copy_kstat_irqs
  ...
2009-03-26 16:06:50 -07:00
Yu Zhao
898585172f PCI: save and restore PCIe 2.0 registers
PCIe 2.0 defines several new registers (Device Control 2, Link Control 2,
and Slot Control 2). Save and retore them in pci_save_pcie_state() and
pci_restore_pcie_state().

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-26 16:02:30 -07:00
Stephen Rothwell
7bb2cb3e90 PCI: update fakephp for bus_id removal
Get rid of a new use of bus_id that snuck in.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-26 16:00:34 -07:00
Kenji Kaneshige
7ae0567fd3 PCI: fix kernel oops on bridge removal
Fix the following kernel oops problem that happens when removing PCI
bridge with pciehp loaded. It should also occur with other hotplug
driver that is implemented as a bridge's driver.

[  459.997257] pciehp 0000:2f:04.0:pcie24: unloading service driver pciehp
[  459.997495] general protection fault: 0000 [#1] SMP
[  459.997737] last sysfs file: /sys/devices/pci0000:00/0000:00:04.0/0000:2e:00.0/0000:2f:04.0/remove
[  459.997964] CPU 4
[  459.998129] Modules linked in: pciehp ipv6 autofs4 hidp rfcomm l2cap bluetooth sunrpc cpufreq_ondemand acpi_cpufreq dm_mirror dm_region_hash dm_log dm_multipath scsi_dh dm_mod sbs sbshc battery ac parport_pc lp parport mptspi mptscsih mptbase scsi_transport_spi e1000e sg sr_mod cdrom button serio_raw i2c_i801 i2c_core shpchp pcspkr ata_piix libata megaraid_sas sd_mod scsi_mod crc_t10dif ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode]
[  459.998129] Pid: 56, comm: events/4 Not tainted 2.6.29-rc8-kk #1 PRIMERGY
[  459.998129] RIP: 0010:[<ffffffff803bf047>]  [<ffffffff803bf047>] pci_slot_release+0x37/0x100
[  459.998129] RSP: 0018:ffff88083b3bf9e0  EFLAGS: 00010246
[  459.998129] RAX: ffff88083adc5158 RBX: ffff880836c1bc80 RCX: 6b6b6b6b6b6b6b6b
[  459.998129] RDX: 0000000000000000 RSI: ffffffff803a77f0 RDI: ffff880836c1bc48
[  459.998129] RBP: ffff88083b3bfa00 R08: 0000000000000002 R09: 0000000000000000
[  459.998129] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880836c1bc48
[  459.998129] R13: ffff880836c1bc20 R14: ffff880836c1bc48 R15: ffff880836d1ec38
[  459.998129] FS:  0000000000000000(0000) GS:ffff88083ccc3770(0000) knlGS:0000000000000000
[  459.998129] CS:  0010 DS: 0018 ES: 0018 CR0: 000000008005003b
[  459.998129] CR2: 00007f1562f1d558 CR3: 0000000838090000 CR4: 00000000000006e0
[  459.998129] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  459.998129] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[  459.998129] Process events/4 (pid: 56, threadinfo ffff88083b3be000, task ffff88083b3b3e40)
[  459.998129] Stack:
[  459.998129]  ffff880836c1bc80 ffff880836c1bc48 ffffffff80793320 ffff88083b0d0960
[  459.998129]  ffff88083b3bfa30 ffffffff803a788a ffff880836c1bc80 ffffffff803a77f0
[  459.998129]  ffff880836c1bc20 ffff880836d1ec38 ffff88083b3bfa50 ffffffff803a8ce7
[  459.998129] Call Trace:
[  459.998129]  [<ffffffff803a788a>] kobject_release+0x9a/0x290
[  459.998129]  [<ffffffff803a77f0>] ? kobject_release+0x0/0x290
[  459.998129]  [<ffffffff803a8ce7>] kref_put+0x37/0x80
[  459.998129]  [<ffffffff803a76f7>] kobject_put+0x27/0x60
[  459.998129]  [<ffffffff803bebcc>] ? pci_destroy_slot+0x3c/0xc0
[  459.998129]  [<ffffffff803bebd5>] pci_destroy_slot+0x45/0xc0
[  459.998129]  [<ffffffff803c797d>] pci_hp_deregister+0x13d/0x210
[  459.998129]  [<ffffffffa031141d>] cleanup_slots+0x2d/0x80 [pciehp]
[  459.998129]  [<ffffffffa0311735>] pciehp_remove+0x15/0x30 [pciehp]
[  459.998129]  [<ffffffff803c4c99>] pcie_port_remove_service+0x69/0x90
[  459.998129]  [<ffffffff80441da9>] __device_release_driver+0x59/0x90
[  459.998129]  [<ffffffff80441edb>] device_release_driver+0x2b/0x40
[  459.998129]  [<ffffffff804419d6>] bus_remove_device+0xa6/0x120
[  459.998129]  [<ffffffff8043e46b>] device_del+0x12b/0x190
[  459.998129]  [<ffffffff803c4d90>] ? remove_iter+0x0/0x40
[  459.998129]  [<ffffffff8043e4f6>] device_unregister+0x26/0x70
[  459.998129]  [<ffffffff803c4dbf>] remove_iter+0x2f/0x40
[  459.998129]  [<ffffffff8043ddf3>] device_for_each_child+0x33/0x60
[  459.998129]  [<ffffffff8033ee30>] ? sysfs_schedule_callback_work+0x0/0x50
[  459.998129]  [<ffffffff803c4d30>] pcie_port_device_remove+0x30/0x80
[  459.998129]  [<ffffffff803c55a1>] pcie_portdrv_remove+0x11/0x20
[  459.998129]  [<ffffffff803bfeb2>] pci_device_remove+0x32/0x70
[  459.998129]  [<ffffffff80441da9>] __device_release_driver+0x59/0x90
[  459.998129]  [<ffffffff80441edb>] device_release_driver+0x2b/0x40
[  459.998129]  [<ffffffff804419d6>] bus_remove_device+0xa6/0x120
[  459.998129]  [<ffffffff8043e46b>] device_del+0x12b/0x190
[  459.998129]  [<ffffffff8043e4f6>] device_unregister+0x26/0x70
[  459.998129]  [<ffffffff803ba969>] pci_stop_dev+0x49/0x60
[  459.998129]  [<ffffffff803baab0>] pci_remove_bus_device+0x40/0xc0
[  459.998129]  [<ffffffff803c10d9>] remove_callback+0x29/0x40
[  459.998129]  [<ffffffff8033ee4f>] sysfs_schedule_callback_work+0x1f/0x50
[  459.998129]  [<ffffffff8025769a>] run_workqueue+0x15a/0x230
[  459.998129]  [<ffffffff80257648>] ? run_workqueue+0x108/0x230
[  459.998129]  [<ffffffff8025846f>] worker_thread+0x9f/0x100
[  459.998129]  [<ffffffff8025bce0>] ? autoremove_wake_function+0x0/0x40
[  459.998129]  [<ffffffff802583d0>] ? worker_thread+0x0/0x100
[  459.998129]  [<ffffffff8025b89d>] kthread+0x4d/0x80
[  459.998129]  [<ffffffff8020d4ba>] child_rip+0xa/0x20
[  459.998129]  [<ffffffff8020cebc>] ? restore_args+0x0/0x30
[  459.998129]  [<ffffffff8025b850>] ? kthread+0x0/0x80
[  459.998129]  [<ffffffff8020d4b0>] ? child_rip+0x0/0x20
[  459.998129] Code: 56 49 89 fe 41 55 4c 8d 6f d8 41 54 53 74 09 f6 05 b8 05 c7 00 08 75 72 49 8b 45 00 48 8b 48 28 eb 05 66 90 48 89 f1 49 8b 45 00 <48> 8b 31 48 83 c0 28 0f 18 0e 48 39 c1 74 1c 8b 41 38 41 0f b6
[  459.998129] RIP  [<ffffffff803bf047>] pci_slot_release+0x37/0x100
[  459.998129]  RSP <ffff88083b3bf9e0>
[  460.018595] ---[ end trace 5a08d2095374aedc ]---

The pci_remove_bus_device() removes all buses and devices under the
bridge, and then removes the bridge. So the remove() callback of the
hotplug drivers implemented as a bridge's driver is executed after the
struct pci_bus of the bridge's secondary bus is removed. The remove()
callback of those driver unregisters the slot using pci_destroy_slot(),
and slot's release callback refers to the the struct pci_bus that was
already freed. This is the cause of the kernel oops.

This patch solves the problem by stopping bus drivers before removing the
bridge and its child bus and devices.

Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-26 15:55:18 -07:00
Yu Zhao
853346e435 PCI: fix conflict between SR-IOV and config space sizing
New pci_cfg_space_size() needs invalid pdev->class, put it in the
right place in the pci_setup_device().

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-26 15:50:18 -07:00
Bob Moore
993958feca ACPICA: Update FADT flag definitions
Add new flags in the Boot Architecture flags field. Update comments
for all FADT flags. Add FADT version when each flag was defined.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2009-03-26 16:38:21 -04:00
Zhao, Yu
afeeb7cebb intel-iommu: Fix address wrap on 32-bit kernel.
The problem is in dma_pte_clear_range and dma_pte_free_pagetable. When
intel_unmap_single and intel_unmap_sg call them, the end address may be
zero if the 'start_addr + size' rounds up. So no PTE gets cleared. The
uncleared PTE fires the BUG_ON when it's used again to create new mappings.

After I modified dma_pte_clear_range a bit, the BUG_ON is gone.

Tested both 32 and 32 PAE modes on Intel X58 and Q35 platforms.

Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-25 16:03:49 +00:00
David Woodhouse
4cf2e75d0b intel-iommu: Enable DMAR on 32-bit kernel.
If we fix a few highmem-related thinkos and a couple of printk format
warnings, the Intel IOMMU driver works fine in a 32-bit kernel.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-25 16:00:41 +00:00
Han, Weidong
3199aa6bc8 intel-iommu: fix PCI device detach from virtual machine
When assign a device behind conventional PCI bridge or PCIe to
PCI/PCI-x bridge to a domain, it must assign its bridge and may
also need to assign secondary interface to the same domain.

Dependent assignment is already there, but dependent
deassignment is missed when detach device from virtual machine.
This results in conventional PCI device assignment failure after
it has been assigned once. This patch addes dependent
deassignment, and fixes the issue.

Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-25 15:53:53 +00:00
Kay Sievers
54cc6954a4 pci: struct device - replace bus_id with dev_name(), dev_set_name()
Cc: jbarnes@virtuousgeek.org
Cc: linux-pci@vger.kernel.org
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
2009-03-24 16:38:21 -07:00
Sheng Yang
9cf0669746 intel-iommu: VT-d page table to support snooping control bit
The user can request to enable snooping control through VT-d page table.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-24 09:42:54 +00:00
Sheng Yang
dbb9fd8630 iommu: Add domain_has_cap iommu_ops
This iommu_op can tell if domain have a specific capability, like snooping
control for Intel IOMMU, which can be used by other components of kernel to
adjust the behaviour.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-24 09:42:51 +00:00
Sheng Yang
58c610bd1a intel-iommu: Snooping control support
Snooping control enabled IOMMU to guarantee DMA cache coherency and thus reduce
software effort (VMM) in maintaining effective memory type.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-24 09:42:43 +00:00
Alex Chiang
8ffd254547 PCI Hotplug: rename legacy_fakephp to fakephp
We wanted to replace fakephp wholesale, so rename legacy_fakephp back
to fakephp. Yes, this is a silly commit, but it produces a much easier
patch to read and review.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:59:37 -07:00
Trent Piepho
83dbf66f04 PCI Hotplug: restore fakephp interface with complete reimplementation
A complete re-implementation of fakephp is necessary if it is to
present its former interface (pre-2.6.27, when it broke). The
reason is that PCI hotplug drivers call pci_hp_register(), which
enforces the rule that only one /sys/bus/pci/slots/ file may be
created per physical slot.

The change breaks the old fakephp's assumption that it could
create a file per function. So we re-implement fakephp to avoid
using the standard PCI hotplug API so that we can restore the old
fakephp user interface.

It puts entries in /sys/bus/pci/slots with the names of all PCI
devices/functions, exactly symmetrical to what is shown in
/sys/bus/pci/devices. Each slots/ entry has a "power" attribute,
which works the same way as the fakephp driver's power attribute
has worked.

There are a few improvements over old fakephp, which couldn't handle
PCI devices being added or removed via a means outside of
fakephp's knowledge.  If a device was added another way, old fakephp
didn't notice and didn't create the fake slot for it.  If a
device was removed another way, old fakephp didn't delete the fake
slot for it (and accessing the stale slot caused an oops).

The new implementation overcomes these limitations. As a
consequence, removing a bridge with other devices behind it now
works as well, which is something else old fakephp couldn't do
previously.

This duplicates a tiny bit of the code in the PCI core that does
this same function.  Re-using that code ends up being more
complex than duplicating it, and it makes code in the PCI core
more ugly just to support this legacy fakephp interface
compatibility layer.

Reviewed-by: James Cameron <qz@hp.com>
Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:59:25 -07:00
Alex Chiang
738a6396c2 PCI: Introduce /sys/bus/pci/devices/.../rescan
This interface allows the user to force a rescan of the device's
parent bus and all subordinate buses, and rediscover devices removed
earlier from this part of the device tree.

Cc: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:59:07 -07:00
Alex Chiang
77c27c7b49 PCI: Introduce /sys/bus/pci/devices/.../remove
This patch adds an attribute named "remove" to a PCI device's sysfs
directory.  Writing a non-zero value to this attribute will remove the PCI
device and any children of it.

Trent Piepho wrote the original implementation and documentation.

Thanks to Vegard Nossum for testing under kmemcheck and finding locking
issues with the sysfs interface.

Cc: Trent Piepho <xyzzy@speakeasy.org>
Tested-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:58:48 -07:00
Alex Chiang
705b1aaa82 PCI: Introduce /sys/bus/pci/rescan
This interface allows the user to force a rescan of all PCI buses
in system, and rediscover devices that have been removed earlier.

pci_bus_attrs implementation from Trent Piepho.

Thanks to Vegard Nossum for discovering locking issues with the
sysfs interface.

Cc: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:57:58 -07:00
Alex Chiang
3ed4fd96b3 PCI: Introduce pci_rescan_bus()
This API is used by the PCI core to rescan a bus and rediscover
newly added devices.

Over time, it is expected that the various PCI hotplug drivers
will migrate to this interface and away from the old
pci_do_scan_bus() interface.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:57:44 -07:00
Alex Chiang
9dd90cafa7 PCI: do not enable bridges more than once
In preparation for PCI core hotplug, we need to ensure that we do
not attempt to re-enable bridges that have already been enabled.

Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:57:36 -07:00
Alex Chiang
b73e97d95c PCI: do not initialize bridges more than once
In preparation for PCI core hotplug, we need to ensure that we do
not attempt to re-initialize bridges that have already been initialized.

We only need to worry about non-root buses, since we will not allow
root bus removal.

Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:57:32 -07:00
Alex Chiang
74710ded8e PCI: always scan child buses
While scanning bridges, we stop our scan if we encounter a bus
that we've seen before, to work around some buggy chipsets. This
is a good idea, but prevents us from fully scanning the PCI bus
at a future time (to find newly hot-added devices, for example).

Change the logic so that we skip _re-adding_ an existing bus
that we've seen before, but also allow the scan to descend to
all child buses.

Now that we're potentially scanning our child buses again, we
also need to be sure not to attempt re-initializing their BARs
so we avoid that.

This patch lays the groundwork to allow the user to issue a
rescan of the PCI bus at any time.

Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:57:21 -07:00
Trent Piepho
1b69dfc649 PCI: pci_scan_slot() returns newly found devices
pci_scan_slot() has been rewritten to be less complex and will now
return the number of *new* devices found.

Existing callers need not worry because they already assume that
they can't call pci_scan_slot() on an already-scanned slot.

Thus, there is no semantic change for existing callers: returning
newly found devices (this patch) is exactly equal to returning all
found devices (before this patch).

This patch adds some more groundwork to allow us to rescan the
PCI bus during runtime to discover newly added devices.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Reviewed-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:57:05 -07:00
Trent Piepho
90bdb3117f PCI: don't scan existing devices
pci_scan_single_device is supposed to add newly discovered
devices to pci_bus->devices, but doesn't check to see if the
device has already been added. This can cause problems if we ever
want to use this interface to rescan the PCI bus.

If the device is already added, just return it.

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 14:56:45 -07:00
Yu Zhao
74bb1bcc7d PCI: handle SR-IOV Virtual Function Migration
Add or remove a Virtual Function after receiving a Migrate In or Out
Request.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:28 -07:00
Yu Zhao
dd7cc44d0b PCI: add SR-IOV API for Physical Function driver
Add or remove the Virtual Function when the SR-IOV is enabled or
disabled by the device driver. This can happen anytime rather than
only at the device probe stage.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:26 -07:00
Yu Zhao
480b93b783 PCI: centralize device setup code
Move the device setup stuff into pci_setup_device() which will be used
to setup the Virtual Function later.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:25 -07:00
Yu Zhao
a28724b0fb PCI: reserve bus range for SR-IOV device
Reserve the bus number range used by the Virtual Function when
pcibios_assign_all_busses() returns true.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:24 -07:00
Yu Zhao
8c5cdb6adc PCI: restore saved SR-IOV state
Restore the volatile registers in the SR-IOV capability after the
D3->D0 transition.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:24 -07:00
Yu Zhao
d1b054da8f PCI: initialize and release SR-IOV capability
If a device has the SR-IOV capability, initialize it (set the ARI
Capable Hierarchy in the lowest numbered PF if necessary; calculate
the System Page Size for the VF MMIO, probe the VF Offset, Stride
and BARs). A lock for the VF bus allocation is also initialized if
a PF is the lowest numbered PF.

Reviewed-by: Matthew Wilcox <willy@linux.intel.com>
Signed-off-by: Yu Zhao <yu.zhao@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:22 -07:00
David O'Shea
8293b0f629 PCI: Compaq Evo D510 SMBus quirk using USB instead of VGA
On the Compaq Evo D510 SFF/CMT, a PCI quirk activated the SMBus device
based on detection of the on-board VGA controller, but the on-board
VGA is disabled if an AGP card is inserted, so look for one of the USB
controllers instead.

Signed-off-by: David O'Shea <dcoshea@hotmail.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:19 -07:00
Dave Airlie
217f45de3d PCI: expose boot VGA device via sysfs.
X really would like to know which VGA device was considered the boot
device by the system. The x86 PCI fixups have support for discovering
this but we provide no way to expose it to userspace.

This adds a sysfs file per VGA class device which has the value 0 for
non the boot device or unknown, and 1 if the VGA device is the boot
device.

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-20 10:48:17 -07:00