The patch make the file errors free.
Only 4 "WARNING: line over 80 characters" left.
arch/x86/kernel/cpu/mcheck/p5.o:
text data bss dec hex filename
452 0 4 456 1c8 p5.o.before
452 0 4 456 1c8 p5.o.after
md5:
50c945ef150aa95bf0481cc3e1dc3315 p5.o.before.asm
50c945ef150aa95bf0481cc3e1dc3315 p5.o.after.asm
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
The patch kills 45 errors and a few warnings.
The file is now error/warning free:
total: 0 errors, 0 warnings, 237 lines checked
arch/x86/lib/string_32.c has no obvious style problems and is ready for submission.
no code changed:
arch/x86/lib/string_32.o:
text data bss dec hex filename
639 0 0 639 27f string_32.o.before
639 0 0 639 27f string_32.o.after
md5:
2db1c48187cf5113bb595153ee1fc73d string_32.o.before.asm
2db1c48187cf5113bb595153ee1fc73d string_32.o.after.asm
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Also update field names to simply payload_{offset,length} so as to not rule
out uncompressed images.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
> Don't we have a special section for page-aligned data so it doesn't
> waste most of two pages?
We have .bss.page_aligned and it seems appropriate to use it.
text data bss dec hex filename
- 3388 8236 4 11628 2d6c ../build-32/arch/x86/mm/ioremap.o
+ 3388 48 4100 7536 1d70 ../build-32/arch/x86/mm/ioremap.o
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Kills more than 150 errors/warnings
Signed-off-by: Paolo Ciarrocchi <paolo.ciarrocchi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
fix code to access CMOS rtc registers so that it does not use inb_p and
outb_p routines, which are deprecated. Extensive research on all known
CMOS RTC chipset timing shows that there is no need for a delay in
accessing the registers of these chips even on old machines. These chipa
are never on an expansion bus, but have always been "motherboard"
resources, either in the processor chipset or explicitly on the
motherboard, and they are not part of the ISA/LPC or PCI buses, so
delays should not be based on bus timing. The reason to fix it:
1) port 80 writes often hang some laptops that use ENE EC chipsets,
esp. those designed and manufactured by Quanta for HP;
2) RTC accesses are timing sensitive, and extra microseconds may matter;
3) the new "io_delay" function is calibrated by expansion bus timing needs,
thus is not appropriate for access to CMOS rtc registers.
Signed-off-by: David P. Reed <dpreed@reed.com>
Acked-by: Alan Cox <alan@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Replace the hardcoded list of initialization functions for each CPU
vendor by a list in an ELF section, which is read at initialization in
arch/x86/kernel/cpu/cpu.c to fill the cpu_devs[] array. The ELF
section, named .x86cpuvendor.init, is reclaimed after boot, and
contains entries of type "struct cpu_vendor_dev" which associates a
vendor number with a pointer to a "struct cpu_dev" structure.
This first modification allows to remove all the VENDOR_init_cpu()
functions.
This patch also removes the hardcoded calls to early_init_amd() and
early_init_intel(). Instead, we add a "c_early_init" member to the
cpu_dev structure, which is then called if not NULL by the generic CPU
initialization code. Unfortunately, in early_cpu_detect(), this_cpu is
not yet set, so we have to use the cpu_devs[] array directly.
This patch is part of the Linux Tiny project, and is needed for
further patch that will allow to disable compilation of unused CPU
support code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
It becomes to early for ioremap, so we use early_ioremap
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalemp.com>
Acked-by: Shai Fultheim <shai@scalemp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change Makefile so vsmp_64.o object is dependent
on PARAVIRT, rather than X86_VSMP
Signed-off-by: Glauber Costa <gcosta@redhat.com>
Signed-off-by: Ravikiran Thirumalai <kiran@scalemp.com>
Acked-by: Shai Fultheim <shai@scalemp.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
we don't need get that so early.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
I found it strange that the struct sk_buff definition was found
inside the DWARF debugging sections in the generated object, so I verified
and found that there is no need for the files that bring struct sk_buff
definition into this file and verified also that sk_buff is not brought
in indirectly too, thru other headers.
I went on and removed many other unneeded includes and the end
result is:
[acme@doppio net-2.6]$ l /tmp/sys_ia32.o.before /tmp/sys_ia32.o.after
-rw-rw-r-- 1 acme acme 185240 2008-02-06 19:19 /tmp/sys_ia32.o.after
-rw-rw-r-- 1 acme acme 248328 2008-02-06 19:00 /tmp/sys_ia32.o.before
Almost 64KB only on this object file!
There were no other side effects from this change:
[acme@doppio net-2.6]$ objcopy -j "text" /tmp/sys_ia32.o.before /tmp/text.before
[acme@doppio net-2.6]$ objcopy -j "text" /tmp/sys_ia32.o.after /tmp/text.after
[acme@doppio net-2.6]$ md5sum /tmp/text.before /tmp/text.after
b7ac9b17942add68494e698e4f965d36 /tmp/text.before
b7ac9b17942add68494e698e4f965d36 /tmp/text.after
One of the complaints about using tools such as systemtap is
that one has to install the huge kernel-debuginfo package:
[acme@doppio net-2.6]$ rpm -q --qf "%{size}\n" kernel-rt-debuginfo
471737710
543867594
[acme@doppio net-2.6]$
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Cc: Ian Campbell <ijc@hellion.org.uk>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
[ tglx@linutronix.de: cleanup the other structs as well ]
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The extended century readout does not solve the year 2038 problem on
32bit!
v2: Fix compilation on !ACPI, pointed out by tglx
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We assume that the RTC clock is BCD, so print a warning if it claims
to be binary.
[ tglx@linutronix.de: changed to WARN_ON - we want to know that!
If no one reports it we can remove the complete if (RTC_ALWAYS_BCD)
magic, which has RTC_ALWAYS_BCD defined to 1 since Linux 1.0 ... ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We know it is already after 2000. Use the year 2000 offset for both 32
and 64 bit, which removes ifdefs and the 1970 magic.
[ tglx@linutronix.de: remove 1970 magic, replace bogus commit message ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Change size to unsigned long, becase caller and user all used unsigned long.
Also make bad_addr take an alignment parameter.
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
The AMD Fam10h CPUs support new Gigabyte page table entry for
mapping 1GB at a time. Use this for the kernel direct mapping.
Only done for 64bit because i386 does not support GB page tables.
This only applies to the data portion of the direct mapping; the
kernel text mapping stays with 2MB pages because the AMD Fam10h
microarchitecture does not support GB ITLBs and AMD recommends
against using GB mappings for code.
Can be disabled with disable_gbpages on the kernel command line
[ tglx@linutronix.de: simplify enable code ]
[ Yinghai Lu <yinghai.lu@sun.com>: boot fix on 256 GB RAM ]
Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
These new controls toggle experimental support for a new CPU feature,
the straightforward extension of largepages from the pmd level to the
pud level, which allows 1GB (kernel) TLBs instead of 2MB TLBs.
Turn it off by default, as this code has not been tested well enough yet.
Use the CONFIG_DIRECT_GBPAGES=y .config option or gbpages on the
boot line can be used to enable it. If enabled in the .config then
nogbpages boot option disables it.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Clean up the page table dumper (fix boundary conditions, table driven
address ranges, some formatting changes since it is no longer using
the kernel log but a separate virtual file), and generalize to 32
bits.
[ mingo@elte.hu: x86: fix the pagetable dumper ]
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
This patch adds code to the kernel to have an (optional)
/proc/kernel_page_tables debug file that basically dumps the kernel
pagetables; this allows us kernel developers to verify that nothing fishy is
going on and that the various mappings are set up correctly. This was quite
useful in finding various change_page_attr() bugs, and is very likely to be
useful in the future as well.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: mingo@elte.hu
Cc: tglx@tglx.de
Cc: hpa@zytor.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Unify arch/x86/mm/Makefile between 32 and 64 bits.
All configuration variables that are protected by Kconfig constraints
have been put in the common part of the Makefile; however, the NUMA
files are totally different between 32 and 64 bits and are handled via
an ifdef.
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Add debug information for DEBUG_PAGEALLOC to get some statistics about
the pool usage and split status.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
We map a VMA for the 32-bit vDSO even when it's disabled, which is stupid.
For the 32-bit kernel it's the vdso_enabled boot parameter/sysctl
and for the 64-bit kernel it's the vdso32 boot parameter/syscall32 sysctl.
When it's disabled, we don't pass AT_SYSINFO_EHDR so processes don't use
the vDSO for anything, but we still map it. For the non-compat vDSO,
this means we're always putting an extra VMA somewhere, maybe lousing
up the control of the address space the user was hoping for.
Honor the setting by doing nothing in arch_setup_additional_pages.
[ also see: "x86 vDSO: don't use disabled vDSO for signal trampoline" ]
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
If the vDSO was not mapped, don't use it as the "restorer" for a signal
handler. Whether we have a pointer in mm->context.vdso depends on what
happened at exec time, so we shouldn't check any global flags now.
Background:
Currently, every 32-bit exec gets the vDSO mapped even if it's disabled
(the process just doesn't get told about it). Because it's in fact
always there, the bug that this patch fixes cannot happen now. With
the second patch, it won't be mapped at all when it's disabled, which is
one of the things that people might really want when they disable it (so
nothing they didn't ask for goes into their address space).
The 32-bit signal handler setup when SA_RESTORER is not used refers to
current->mm->context.vdso without regard to whether the vDSO has been
disabled when the process was exec'd. This patch fixes this not to use
it when it's null, which becomes possible after the second patch. (This
never happens in normal use, because glibc's sigaction call uses
SA_RESTORER unless glibc detected the vDSO.)
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
people sometimes do crazy stuff like building really large static
arrays into their kernels or building allyesconfig kernels. Give
more space to the kernel and push modules up a bit: kernel has
512 MB and modules have 1.5 GB.
Should be enough for a few years ;-)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
http://bugzilla.kernel.org/show_bug.cgi?id=10124
this change:
commit 08f1c192c3
Author: Muli Ben-Yehuda <muli@il.ibm.com>
Date: Sun Jul 22 00:23:39 2007 +0300
x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata
This patch introduces struct pci_sysdata to x86 and x86-64, and
converts the existing two users (NUMA, Calgary) to use it.
This lays the groundwork for having other users of sysdata, such as
the PCI domains work.
The Calgary bits are tested, the NUMA bits just look ok.
replaces pcibios_scan_root by pci_scan_bus_parented...
but in pcibios_scan_root we have a check about scanned busses.
Cc: <yakui.zhao@intel.com>
Cc: Stian Jordet <stian@jordet.net>
Cc: Len Brown <lenb@kernel.org>
Cc: Greg KH <greg@kroah.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Yinghai Lu" <yhlu.kernel@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The prevent_tail_call() macro works around the problem of the compiler
clobbering argument words on the stack, which for asmlinkage functions
is the caller's (user's) struct pt_regs. The tail/sibling-call
optimization is not the only way that the compiler can decide to use
stack argument words as scratch space, which we have to prevent.
Other optimizations can do it too.
Until we have new compiler support to make "asmlinkage" binding on the
compiler's own use of the stack argument frame, we have work around all
the manifestations of this issue that crop up.
More cases seem to be prevented by also keeping the incoming argument
variables live at the end of the function. This makes their original
stack slots attractive places to leave those variables, so the compiler
tends not clobber them for something else. It's still no guarantee, but
it handles some observed cases that prevent_tail_call() did not.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch also resolves hangs on boot:
http://lkml.org/lkml/2008/2/23/263http://bugzilla.kernel.org/show_bug.cgi?id=10093
The bug was causing once-in-few-reboots 10-15 sec wait during boot on
certain laptops.
Earlier commit 40d6a14662 added
smp_call_function in cpu_idle_wait() to kick cpus that are in tickless
idle. Looking at cpu_idle_wait code at that time, code seemed to be
over-engineered for a case which is rarely used (while changing idle
handler).
Below is a simplified version of cpu_idle_wait, which just makes a dummy
smp_call_function to all cpus, to make them come out of old idle handler
and start using the new idle handler. It eliminates code in the idle
loop to handle cpu_idle_wait.
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
