To resolve one of IOT issues, introduce INI called
"disable_high_ht_mcs_2x2" which will disable high MCS indices for
2G STA case based on INI value.
Change-Id: I60c5edd89a42f74c0f439fe6a9ab0c75373622b2
CRs-Fixed: 2087438
qcacld-2.0 to qcacld-3.0 propagation
Add ini option to enable/disable action frame based channel switch.
Change-Id: I340464a18ef0b5cf09f481a23b01edcf04904e34
CRs-Fixed: 2082563
Constant value 4294967295 is recognized as an signed integer
in ISO C90. Change the definition of the constant value to
4294967295UL to fix compilation error where need a unsigned
value as a input parameter.
Change-Id: I02f67b6351c53b5e3331ce668059c4c61953a8d3
CRs-Fixed: 2023140
When doing HDD context check in ipa_init, the CDS is not yet
loaded. So remove the CDS loading check in ipa_init.
Change-Id: I45843c406f280cfbf932bc489f9051c2300b77ba
CRs-Fixed: 2070428
If TDLS disabled at the build level, it triggers
build failures in some of the projects, which does
not support TDLS feature.
Restructure the TDLS function to avoid build
failures, when TDLS is not enabled.
Change-Id: I3b63546f22d0187fb42d400fd7e15ff7a3d64653
CRs-Fixed: 2056022
Currently there is no support to configure SMPS parameter
from host, add support to configure SMPS parameters using ini.
Change-Id: I6f8273ffed39a0b95c31f1647e86406b870165f2
CRs-Fixed: 2080571
CFG80211_REMOVE_IEEE80211_BACKPORT is added to indicate
backport of Change-Id: 57fbcce37b
from upstream 4.7 kernel to 4.4.
Hence add this flag CFG80211_REMOVE_IEEE80211_BACKPORT to
support this compilation. Also introduce HDD_NUM_NL80211_BANDS.
Change-Id: I60a15a1273f939a0a288d08d03ccb5bf1bdcc429
CRs-Fixed: 2087917
The default value for the ini gdbs_scan_selection is set
with 2 DBS and 2 non-DBS Scan for Module id WLAN_MODULE_
ROAM (5) and WLAN_MODULE_HOST (16). Thus, the scan policy
for full scan is kept getting change for DBS scan and
legacy scan.
This change is to make the default value for the ini
gdbs_scan_selection as NULL, thus disabling the DBS scan
duty cycle feature by default.
Change-Id: I8dd304628b729e11a63aaa2b6dea972cff1798d7
CRs-Fixed: 2062420
Replace sme_tspec_dir_type and sme_QosWmmDirType with sme_qos_wmm_dir_type
to avoid implicit conversion warnings/errors and to conform with linux coding
guidelines.
Change-Id: I1567ebbe7ec8adab3344d96f0d2aa93367975926
CRs-Fixed: 2071677
Because of obsolete macros FEATURE_WLAN_LFR and WLAN_FEATURE_ROAM_SCAN_OFFLOAD
roaming capability is not properly set in get_supported_features.
Fix this by using the proper macros.
Change-Id: I4dec8c32c71fde01b663e11e60f1da171adee3e4
CRs-Fixed: 2067126
This is a qcacld-2.0 to qcacld-3.0 propagation.
Enable feature bits WIFI_FEATURE_CONTROL_ROAMING,
WIFI_FEATURE_IE_WHITELIST and WIFI_FEATURE_SCAN_RAND.
Change-Id: Ia0f136e038e7da040faae04eaa11bcf56bb72443
CRs-Fixed: 1102187
Setting gForce1x1Exception=1 in ini forces DUT to associate to
buggy AP's which are identified via OUI. Enable this feature by
default on all platforms by setting CFG_FORCE_1X1_DEFAULT=1.
Change-Id: Ic459d821f4aedba966beab8ca8ca977b7b639e34
CRs-Fixed: 2084927
Currently if only one address is provided in wlan_mac.bin, it is updated
for interface wlan0. It will be copied to interface p2p0 if a specific
configuration is present. softap0 retains its mac address either generated
from serial number or given through Firmware ready event. This doesn't
guarentee a unique mac address to both these interfaces.
Regardless of configuration Both softap0 and p2p0 should have a unique
mac address with locally administered bit set.
Change-Id: I64299f5c2e2376c8dbdb26ea34ba0187d5d1f28d
CRs-Fixed: 2066086
In certain cases HDD fails to receive callbacks for the scan requests
queued to SME. Kernel may free up these scan requests due to timeout.
During driver shutdown and exit if scan done is performed on these
stale scan requests, kernel crash may occur.
Set a timer of 60 seconds on queued scan requests, after expiry BUG_ON
for debugging purposes.
Change-Id: I6db155b17a8a5ae87208ec84eaab221a53623a63
CRs-Fixed: 2070594
Add support for 5Ghz network RSSI boost/penalty preference
based on ini values.
Change-Id: Ia3ae5dcc35b9a85fde5a609f8f27ff8b4bc35cec
CRs-fixed: 1085554
Vendor features are used to indicate OCE support
from driver to user space which are set based on ini
params for STA and SAP.
Change-Id: I1b9039307d5477883a2fd23e972d20234908ee24
CRs-Fixed: 2031980
sap_restart_on_ch_avoid ini parameter holds good for both SAP and GO.
So to make it generic, rename to ignore_restart_on_chan_avoid_event.
Change-Id: Ic68014a71b36e00c268da50528bf5e14fd87d007
CRs-Fixed: 2027436
Driver is disabling the tdls for 5s from the last p2p-listen request
received. This is leading to tdls connection failure even after p2p
find has been stopped.
So reducing the min and default timer values 500ms and 2s respectively.
CRs-Fixed: 2078933
Change-Id: Id1ab3945d029de8154aede403b354aec99f4cd79
qcacld-2.0 to qcacld-3.0 propagation
Add eCSA capability record of STAs which associated to SAP.
Change-Id: I1d7892bb1dc4e490a587e8372a4bdc7f419e8b36
CRs-Fixed: 1094958
Due to multiple beacon miss issues observed in firmware,
Host is changing final bmiss count to 20 from 10.
Hence firmware can receive beacon in noisy environment.
Change-Id: I87e4a6eaec016f36ca22a057e0d9812c0b8696ff
CRs-Fixed: 2082088
Information in struct ch_params_s are the same for 11g and
11n ht20, so phymode is still needed to distinguish them.
Change-Id: I5ddfc011b4fd3b11c975f8b2df3a270e8141e622
CRs-Fixed: 2073580
Currently both min and max rest time use the same ini param
gNeighborScanTimerPeriod.
Add a new ini param gRoamRestTimeMin for min rest time
during channel scan.
Change-Id: Ifbb0fcc736e81b292639c6f2ad3119b451bec4f2
CRs-Fixed: 2060095
Add a configuration item, gPreventLinkDown, to disable putting the bus
link to sleep during suspend/resume.
Change-Id: Id52c6319cafaef60e6f4e562010615361eb831cd
CRs-Fixed: 2066718
In roaming scenario, to avoid ping pong with bad AP’s around, fw
blacklist certain Ap’s based on timestamps and penalize certain
AP’s of the same channel so they won’t be selected and back and
forth roaming could be avoided. This change adds the following
INI parametres to configure the parametres of this fw feature.
1) groam_disallow_duration - Amount of time LCA[Last Connected AP]
will be disallowed before it can be a
roaming candidate again.
2) grssi_channel_penalization - RSSI to be penalized if
candidate(s) are found in the same
channel as disallowed AP's.
3) groam_num_disallowed_aps - number of AP's the target should
maintain in its LCA list.
Change-Id: I41cb36caf1b42caeb2bf77846bd0279eb43d2018
CRs-Fixed: 2054188
warning: implicit conversion from enumeration type 'enum
nl80211_band' to different enumeration type 'enum ieee80211_band'
[-Wenum-conversion]
Change-Id: I084e015626611ae90be00b11a599ae82f9bf6f60
CRs-Fixed: 2055487
qcacld-2.0 to qcacld-3.0 propagation
If scan is scheduled after long interval there is a chance that driver
is busy with same reason. i.e if scan is scheduled after 5 min there is
a chance that driver is busy in reassoc both time but this will give false
alarm that driver is stuck.
To reduce this condition include number of scan failures as well
along with time interval.
Change-Id: I6fdd0813541aa5d3d069fe8bf3934cfa47425550
CRs-Fixed: 2064605
Add handler for the new WMI BT activity event and propagate the BT
event till HDD. These BT activity events will be used for MBO
enhancements to decide whether to accept the BTM request from
AP or not.
Change-Id: I687819fd28c693964b42bfb24eb9dae1858b10a5
CRs-Fixed: 2023728
Increase the scan ageing timer value from 30 seconds
to 90 seconds for the configuration item
gScanAgingTime
Change-Id: Ic4f87c20601f753c71710d20ed98bdb774538f82
CRs-Fixed: 2072461
qcacld-2.0 to qcacld-3.0 propagation
Host driver can send number of max AMSDUs in transmit frames.
Added a call to process_wma_set_command() similar to CLI
command processing for GEN_VDEV_PARAM_AMSDU during device
initialization.
Changed name of the field from isAmsduSupportInAMPDU to max_amsdu_num
in several places. Existing SME and LIM code passes this parameter
to WMA, but it is not used there. It may be useful if AMSDU setting
is changed to per-vdev basis in future.
WCNSS_qcom_cfg.ini changes:
Removed - "gAmsduSupportInAMPDU"
Added - Name = "gMaxAmsduNum", Min = 0, Max = 3, Default = 1
Actual function call to ol_txrx_aggr_cfg() send the parameters to
firmware is commented out because it is not implemented in firmware.
Change-Id: I2dfdd8c8c4a8807596ff28eee192ef66ac425653
CRs-Fixed: 871686
For a small window during roaming and new connection, there is a
possibility of firmware to send the invalid rssi value(other than
0-127), leading driver to send the same invalid rssi value to upper-layer.
To mitigate this issue:
1) Either send previous valid rssi value to upper-layer on receiving invalid
rssi value from the firmware.
2) Or if previous rssi value is not valid, fetch rssi value from beacon frame
of connected AP from scan cache.
Change-Id: I4443ed06cd80826ff386c2b4a536a2dc1a1e0881
CRs-Fixed: 2042747
FTM state structures wlan_hdd_ftm_state and wlan_hdd_ftm_status
are not used hence remove them.
Change-Id: I03e0e11e3f7436da99eeb6a1b0fd128e5bf31e7e
CRs-Fixed: 2052605
