Based on cfg component, define PMO configures and add APIs to get or
set configures.
Change-Id: I9b9ff1f8701168787985cbcb219361a3f63c787f
CRs-Fixed: 2322176
Add debugfs entry to get offload info (mc addr list, arp, ns etc.,)
for STA interface.
Change-Id: I8bf4491929b5ef04ed5ce19f4b0030945f0eb0c0
CRs-Fixed: 2203786
Update driver to use NAN config params based converged CFG
component. Cleanup hdd config references to nan ini params.
Change-Id: I5af85d68ee53ad557e64523f7a1719e328536926
CRs-fixed: 2290360
Currently the host sends the fixed gtk offload params
and the FILS TLV params, even when the FILS feature is disabled
in the host, which force firmware to pick the KEK from the
FILS TLV structure rather than from the fixed param structure,
which further leads to GTK re-keying feature fail.
Fix is to send only the fixed params in case when host doesnt
supports FILS.
Change-Id: I5b3b3fd503c7cb9c4d7933074fd483086b113204
CRs-Fixed: 2244725
Before wow enable or pdev suspend host sets hardware filter bitmap
and enables the filter via a command. But after resuming it sends
bitmap as zero with filter disable. This is interpreted by Firmware
as disable the modes set in the bitmap, so none of the modes are
disabled. With this host will not receive bc/mc packets after
disabling the hw filter, which it is expecting.
Send the same bitmap after resume that was used before suspend.
Change-Id: Ic7425274c9197e907404c3ca9ba0d5269ee51690
CRs-Fixed: 2194964
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I9e02edbc580ffb2c559c8e864f54d255fc2d51a3
CRs-Fixed: 2191530
PMO should not know about vdev data path handle, but
pmo_unpause_all_vdev() need it, so register a wma callback to retrieve
the vdev dp handle instead of keep a copy in pmo vdev private context.
Refine current code to retrieve vdev dp handle using a wma callback
Change-Id: I1f668fff633a5e5cdfc478e7f619e9600930b333
CRs-Fixed: 2227384
Add support for getting cfg integer from PMO. Register callbacks
during pe_open/close so that PMO can query CFG int values for
calculating parameters like listen interval etc.
Change-Id: I52d165586576e547e175ba276e6b7225db5b27e0
CRs-Fixed: 2252661
Total 16 number of WoW filters are PoRed for Genoa.
Define CONFIG_PMO_WOW_FILTERS in genoa defconfigs with value 16.
Change-Id: Iba3d9875c954b32a3f22cfd639f4508beb36a5d5
CRs-Fixed: 2257033
Current ucfg API's that disables wow events accept a u32 bitmap
variable. A pointer to that variable is passed to core API where
it assumes it as a u32 array of 4 bytes. This will lead to out of
bound memory access.
Change wow enable/disable API's to accept wow event type as the
parameter.
Change-Id: I220aaddfea62ab96f121014d0d65a1406988c946
CRs-Fixed: 2233108
wma_is_service_enabled can't get valid service bitmap if call in
hdd_update_pmo_config, use psoc_ctx->caps.unified_wow instead to check
pattern id per vdev and legacy d0 wow capability.
Change-Id: If7bf316f482c49253fc4b95b94e172727b27ffd1
CRs-Fixed: 2225847
Add feature flag for PMO component such that for high latency
and IoT devices power management and offload component can be
compiled out.
Change-Id: Iaccda7d9e895cdb4610f0ec984add3aeb7ef9926
CRs-Fixed: 2227330
Add feature flag for PMO component such that for high latency
and IoT devices power management and offload component can be
compiled out.
Change-Id: I2c88b6af33e8f10f1837263f157c1f6892a2c2fb
CRs-Fixed: 2227326
Historically, recovery was triggered if PDEV suspend failed, but the
logic was lost during componentization. Restore the previous logic of
triggering recovery on PDEV suspend timeout.
Change-Id: I6e193e98c5ef45fd7ab4b6595ea85d986fa84131
CRs-Fixed: 2215588
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2
num_packet_filter = Packet Filter enabled ? 12 : 0xffffffff
Change-Id: Ie8cb4ae44c83b115b249e22ebd7146278ed70612
CRs-Fixed: 2199297
Recent changes in Power Management and Offload (PMO) have removed the
need for a configurable maximum number of WoW filters. Remove the
following relevant fields:
* maxWoWFilters
* CFG_MAX_WOW_FILTERS_MAX
* WMA_STA_WOW_DEFAULT_PTRN_MAX
* max_wow_filters
* ol_ini_info
Change-Id: I99cc74731d6373258dc65473a8342bda0ab2786b
CRs-Fixed: 2199452
In order to conserve firmware memory when various filtering features are
not in use, update the target configuration provided to firmware based
on the intersection of various filtering features and host
configuration.
Part 1
num_wow_filters = ARP/NS offload enabled ? 2 : 5
bpf_instruction_size - BPF enabled ? 0 (auto) : 0xffffffff
Part 2 (pending firmware support)
pkt_filter_num = Packet Filter enabled ? 12 : 0 (disabled)
Change-Id: Ic6624ff04598b53d8321e4864618b12b9702780f
CRs-Fixed: 2196997
Provide PMO-specific device capabilities to PMO. This allows PMO to do
intersections between configuration and device capabilities.
Change-Id: If0a199f9be466d16cef900a29b14b73a2a4e52d0
CRs-Fixed: 2197828
pmo_core_wow_enter(), pmo_core_wow_exit() and struct
pmo_wow_enter_params are all dead code. Remove them.
Change-Id: I254a0bad794ffc1170a2799918e1627a3e01e340
CRs-Fixed: 2199462
Rename pmo_ucfg_* API to ucfg_pmo_* to match existing
naming convention for component ucfg APIs.
Change-Id: I59491eff038709a883efb527168159a7e9e2ba2a
CRs-Fixed: 2145088
Measurement pilot public action frame (Action Id = 7) is not
handled in the driver, if the AP is sending this action frame
it ends up waking up the APPS and burn battery.
Since anyway host is not handling this action frame, configure
the firmware to drop this action frame.
Change-Id: I15327f9af8cccaa7324e4e39f1e6336225740b75
CRs-Fixed: 2146506
Enable FEATURE_WLAN_DOWOW for pcie.
This is for backward compatible with rome fw.
Change-Id: Ia2107ff6939666b4a0bd19d57149d17814f2dfb5
CRs-Fixed: 2070426
Change "qcacmn: Rename enum tQDF_ADAPTER_MODE" (qca-wifi-host-cmn
Change-Id I20f1b6d1a0ab4b8fe6a85cefdff96a49e2f4652c) renamed enum
tQDF_ADAPTER_MODE to QDF_OPMODE. Update all references to use the
new name.
Change-Id: Ic6f663dac11a100f168b2626c7c0fbcaccbfca4f
CRs-Fixed: 2141065
Rename pmo_ucfg_* APIs to ucfg_pmo_* to match existing
naming convention for component ucfg APIs.
Change-Id: I9fba71ee5d5cf6428f043c7d7782ef585951e059
CRs-Fixed: 2140474
Rename pmo_ucfg_is_vdev_connected to ucfg_pmo_is_vdev_connected
to match existing naming convention for component ucfg APIs.
Change-Id: Idd04103664135f226881b07263365d70df5790e0
CRs-Fixed: 2135888
Rename pmo_ucfg_is_ap_mode_supports_arp_ns to ucfg_pmo_*
to match existing naming convention for component ucfg APIs.
Change-Id: I6877e1ebbc8a89d9b2cfb08f7af46e3f3b6606f3
CRs-Fixed: 2135193
PMO resume timeout is 25 seconds which is too large
hence reduce PMO resume timeout to 6 seconds.
Change-Id: I9f29e136bc091ddd3ae2ca38a495edcbff6c1cb8
CRs-Fixed: 2128481
Checkpatch reported multiple instances of block comments not aligning
on "*" so fix them.
Change-Id: I082f62f59fe16d84ba013adbbfcd2e9bf1985e3c
CRs-Fixed: 2122901
This is a qcacld-2.0 to qcacld-3.0 propagation.
If the device connects to 11k enabled AP and enter WoW mode, then
the AP is keep sending RRM beacon reports (Action frames) which are
waking up the APPS and leading to battery drain.
The fix is to configure the firmware to not to wake up APPS
for RRM action frame.
Change-Id: I2368be4f641b8b8684a458daea52a81fa671200b
CRs-Fixed: 1115560
Add support for WMI_SET_MULTIPLE_MCAST_FILTER_CMDID command
that can add/delete multiple mcast filters.
CRs-Fixed: 2096595
Change-Id: I3dc93c603a5a6676d97b5911a716277c7bef0ef8
Update ini param g_auto_detect_power_failure_mode to incorporate below
values,
0 - Don't register wow wakeup event and FW crashes on power failure
1 - Register wow wakeup event and FW sends failure event to host on
power failure
2 - Don't register wow wakeup event and FW silently rejuvenate on
power failure
3 - Don't register wow wakeup event and the auto power failure detect
feature is disabled in FW.
Change-Id: I8a704954ecbacadbc035c1523fa41a18b6300f66
CRs-Fixed: 2087144
Add new kek_len param used for FILS in the pmo_gtk_req structure under
PMO GTK public structures
Change-Id: I4fc25026d9fc004f267b9461d1671f8b1ac57f53
CRs-Fixed: 2081252
The Wow pattern id should be identified unique for different vdevs of
legacy firmware, and latest firmware accept same Wow pattern id on
different vdevs.
This change is to differentiate this behavior using
WMI_SERVICE_UNIFIED_WOW_CAPABILITY flag, and supply a set of APIs to
manipulate pattern id.
Change-Id: I5fe7623a309a0c3baa14fb7312107c057e994462
CRs-Fixed: 2103017
Currently, host driver sets bitmap of allowed action frames to fw.
For a particular action category, there are certain action id
frames which are not processed. This causes host wakeup and leads
to power drain.
Set action id along with action category to fw for action frames
to be allowed to host driver.
Change-Id: Ifa0b40b290fcabb9ce5e48f69bd462aebb9017ac
CRs-Fixed: 2072123
Currently, a hard-coded enhanced multicast filter configuration is being
sent to firmware. Instead, create a set of enable/disable APIs, and
configure enhanced multicast filter based on advertised firmware
capability.
Change-Id: I488b4a921612e1081266be8831be098d755375f9
CRs-Fixed: 2078615
