Commit Graph

15 Commits

Author SHA1 Message Date
Hans Verkuil
35ea11ff84 V4L/DVB (8430): videodev: move some functions from v4l2-dev.h to v4l2-common.h or v4l2-ioctl.h
The functions in a header should not belong to another module. The prio functions
belong to v4l2-common.c, so move them to v4l2-common.h.

The ioctl functions belong to v4l2-ioctl.c, so create a new v4l2-ioctl.h header
and move those functions to it.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-23 19:00:17 -03:00
Hans Verkuil
78b526a435 V4L/DVB (7949): videodev: renamed the vidioc_*_fmt_* callbacks
The naming for the callbacks that handle the VIDIOC_ENUM_FMT and
VIDIOC_S/G/TRY_FMT ioctls was very confusing. Renamed it to match
the v4l2_buf_type name.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-07-20 07:07:32 -03:00
Douglas Schilling Landgraf
ff699e6bd0 V4L/DVB (7094): static memory
- Static memory is always initialized with 0.
- Replaced in some cases C99 comments for /* */

Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-04-24 13:42:20 -03:00
Mauro Carvalho Chehab
64f9477f95 V4L/DVB (7121): Renames videobuf lock to vb_lock
This helps to identify where vb_lock is being used, and find missusages of the
locks.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-02-18 11:15:12 -03:00
Mauro Carvalho Chehab
e5ae3db461 V4L/DVB (6912): Replace vidioc_ to bttv_
Since there are a few vidioc_ functions that were exported, rename those
functions to bttv_ in order to avoid poluting namespace.

The other functions were also renamed, to standardize inside the driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:21 -02:00
Douglas Schilling Landgraf
402aa76aa5 V4L/DVB (6911): Converted bttv to use video_ioctl2
Signed-off-by: Douglas Schilling Landgraf <dougsland@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:04:20 -02:00
Brandon Philips
0fc0686e64 V4L/DVB (6600): V4L: videobuf: don't chew up namespace STATE_.*, convert to VIDEOBUF_
s/STATE_NEEDS_INIT/VIDEOBUF_NEEDS_INIT/g
s/STATE_PREPARED/VIDEOBUF_PREPARED/g
s/STATE_QUEUED/VIDEOBUF_QUEUED/g
s/STATE_ACTIVE/VIDEOBUF_ACTIVE/g
s/STATE_DONE/VIDEOBUF_DONE/g
s/STATE_ERROR/VIDEOBUF_ERROR/g
s/STATE_IDLE/VIDEOBUF_IDLE/g

Signed-off-by: Brandon Philips <bphilips@suse.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2008-01-25 19:02:11 -02:00
Mauro Carvalho Chehab
c1accaa21b V4L/DVB (6252): Adapt drivers to use the newer videobuf modules
PCI-dependent videobuf_foo methods were renamed as videobuf_pci_foo.

Also, videobuf_dmabuf is now part of videobuf-dma-sg private struct.
So, to access it, a subroutine call is needed.

This patch renames all occurences of those function calls to be
consistent with the video-buf split.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
http://thread.gmane.org/gmane.comp.video.video4linux/34978/focus=34981
Reviewed-by: Ricardo Cerqueira <v4l@cerqueira.org>
2007-10-09 22:14:55 -03:00
Mauro Carvalho Chehab
9c12224a60 V4L/DVB (6079): Cleanup: remove linux/moduleparam.h from drivers/media files
Since at least kernel 2.6.12-rc2, module.h includes moduleparm.h. This
patch removes all occurences of moduleparm.h from drivers/media files.

Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-10-09 22:06:17 -03:00
Michael Schimek
feaba7a96d V4L/DVB (5156): Fix: dma free is being called with wrong arguments
Functions buffer_release() in bttv-driver.c and
vbi_buffer_release() in bttv-vbi.c are ending with:
      bttv_dma_free(&fh->cap,fh->btv,buf);
 
For vbi it seems to be wrong. Both functions should end with:
 
      bttv_dma_free(q,fh->btv,buf);
Thanks to Peter Schlaf <peter.schlaf@web.de> for pointing this.

Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:35:08 -02:00
Michael Schimek
e5bd0260e7 V4L/DVB (5077): Bttv cropping support
Adds the missing VIDIOC_CROPCAP, G_CROP and S_CROP ioctls, permitting 
applications to capture or overlay a subsection of the picture or to 
extend the capture window beyond active video, into the VBI area and the 
horizontal blanking. VBI capturing can start and end on any line, 
including the picture area, and apps can capture different lines of each 
field and single fields.
For compatibility with existing applications, the open() function
resets the cropping and VBI capturing parameters and a VIDIOC_S_CROP
call is necessary to actually enable cropping. 
Regrettably in PAL-M, PAL-N, PAL-Nc and NTSC-JP mode the maximum image 
width will increase from 640 and 768 to 747 and 923 pixels respectively.
Like the VBI changes however, this should only affect applications which 
depend on former driver limitations, such as never getting more than 640 
pixels regardless of the requested width. 
Also, new freedoms require additional checks for conflicts and some 
applications may not expect an EBUSY error from the VIDIOC_QBUF and 
VIDIOCMCAPTURE ioctls. These errors should be rare though.
So far, the patch has been tested on a UP machine with a bt878 in PAL-
BGHI and NTSC-M mode using xawtv, tvtime, mplayer/mencoder, zapping/
libzvbi and these tools: http://zapping.sf.net/bttv-crop-test.tar.bz2
I'd be grateful about comments or bug reports.

Signed-off-by: Michael H. Schimek <mschimek@gmx.at>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2007-02-21 13:34:36 -02:00
Tim Schmielau
cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00
Trent Piepho
ddecbe112b V4L/DVB (4380): Bttv: Revert VBI_OFFSET to previous value, it works better
A previous patch changed VBI_OFFSET to match what the datasheets say it
should be.  However, the bt8x8 datasheets are wrong.  The old value of
244 is closer to what is actually observed.  The real value appears to
not be constant and is different for different chip revisions.
Acked-by: Alan Cox <alan@redhat.com>

Signed-off-by: Trent Piepho <xyzzy@speakeasy.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-07-29 17:22:39 -03:00
Mauro Carvalho Chehab
4ae5c2e5e6 V4L/DVB (3614): Fix compilation warning at powerpc platform
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-04-02 04:55:02 -03:00
Manu Abraham
faecfb1760 V4L/DVB (3539): Move bttv fragments to bt8xx/
Signed-off-by: Manu Abraham <manu@linuxtv.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
2006-03-24 16:26:50 -03:00