AMD K10 CPUs implement the FFXSR feature that gets enabled using
EFER. Let's check if the virtual CPU description includes that
CPUID feature bit and allow enabling it then.
This is required for Windows Server 2008 in Hyper-V mode.
v2 adds CPUID capability exposure
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
AMD k10 includes support for the FFXSR feature, which leaves out
XMM registers on FXSAVE/FXSAVE when the EFER_FFXSR bit is set in
EFER.
The CPUID feature bit exists already, but the EFER bit is missing
currently, so this patch adds it to the list of known EFER bits.
Signed-off-by: Alexander Graf <agraf@suse.de>
CC: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
IRQ ack notifications assume an identity mapping between pin->gsi,
which might not be the case with, for example, HPET.
Translate before acking.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Acked-by: Gleb Natapov <gleb@redhat.com>
Account for number of online cpus and use that in loops iterating over
the list of vpus instead of scanning the full array unconditionally.
This patch is a building block to facilitate allowing to bump up
the size of MAX_VCPUS significantly.
Signed-off-by: Jes Sorensen <jes@sgi.com>
Acked-by : Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This patch fixes the SET PREFIX interrupt if triggered by userspace.
Until now, it was not necessary, but life migration will need it. In
addition, it helped me creating SMP support for my kvm_crashme tool
(lets kvm execute random guest memory content).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The kernel handles some priviledged instruction exits. While I was
unable to trigger such an exit from guest userspace, the code should
check for supervisor state before emulating a priviledged instruction.
I also renamed kvm_s390_handle_priv to kvm_s390_handle_b2. After all
there are non priviledged b2 instructions like stck (store clock).
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
KVM on s390 does not support the ESA/390 architecture. We refuse to
change the architecture mode and print a warning. This patch removes
the printk for several reasons:
o A malicious guest can flood host dmesg
o The old message had no newline
o there is no connection between the message and the failing guest
This patch simply removes the printk. We already set the condition
code to 3 - the guest knows that something went wrong.
Reported-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
For windows 2008, it needs more pal calls to implement for booting.
In addition, also changes the name of set_{sal, pal}_call_result to
get_{sal,pal}_call_result for readability.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Add the support to translate PAL Call's pointer args.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Simply the logic of hash vTLB, and export kvm_gpa_to_mpa.
Signed-off-by: Xiantao Zhang <xiantao.zhang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Kconfig symbols are not available in userspace, and are not stripped by
headers-install. Avoid their use by adding #defines in <asm/kvm.h> to
suit each architecture.
Signed-off-by: Avi Kivity <avi@redhat.com>
Currently KVM has a static routing from GSI numbers to interrupts (namely,
0-15 are mapped 1:1 to both PIC and IOAPIC, and 16:23 are mapped 1:1 to
the IOAPIC). This is insufficient for several reasons:
- HPET requires non 1:1 mapping for the timer interrupt
- MSIs need a new method to assign interrupt numbers and dispatch them
- ACPI APIC mode needs to be able to reassign the PCI LINK interrupts to the
ioapics
This patch implements an interrupt routing table (as a linked list, but this
can be easily changed) and a userspace interface to replace the table. The
routing table is initialized according to the current hardwired mapping.
Signed-off-by: Avi Kivity <avi@redhat.com>
Some typos, comments, whitespace errors corrected in the cpuid code
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
So, KVM needs to read tlbcam_index to know exactly
which TLB1 entry is unused by host.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
This actually describes what is going on, rather than alerting the reader
that something strange is going on.
Signed-off-by: Avi Kivity <avi@redhat.com>
Zeroing on mmu_memory_cache_alloc is unnecessary since:
- Smaller areas are pre-allocated with kmem_cache_zalloc.
- Page pointed by ->spt is overwritten with prefetch_page
and entries in page pointed by ->gfns are initialized
before reading.
[avi: zeroing pages is unnecessary]
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
While the PIT is masked the guest cannot ack the irq, so the reinject logic
will never allow the interrupt to be injected.
Fix by resetting the reinjection counters on unmask.
Unbreaks Xen.
Signed-off-by: Avi Kivity <avi@redhat.com>
Two KVM archs support irqchips and two don't. Add a Kconfig item to
make selecting between the two models easier.
Signed-off-by: Avi Kivity <avi@redhat.com>
Using kvm_mmu_lookup_page() will result in multiple scans of the hash chains;
use hlist_for_each_entry_safe() to achieve a single scan instead.
Signed-off-by: Avi Kivity <avi@redhat.com>
VMware ESX checks if the microcode level is correct when using a barcelona
CPU, in order to see if it actually can use SVM. Let's tell it we're on the
safe side...
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Avi Kivity <avi@redhat.com>
After the rewrite of KVM's debug support, this code doesn't even build any
more.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Allow emulate_pop() to read into arbitrary memory rather than just the
source operand. Needed for complicated instructions like far returns.
Signed-off-by: Avi Kivity <avi@redhat.com>
If we've just emulated an instruction, we won't have any valid exit
reason and associated information.
Fix by moving the clearing of the emulation_required flag to the exit handler.
This way the exit handler can notice that we've been emulating and abort
early.
Signed-off-by: Avi Kivity <avi@redhat.com>
Although BOOKE_MAX_INTERRUPT has the right value, the meaning is not match.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
When itlb or dtlb miss happens, E500 needs to update some mmu registers.
So that the auto-load mechanism can work on E500 when write a tlb entry.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
E500 deosn't support this instruction.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Kernel for E500 need clear dbsr when startup.
So add dbsr register in kvm_vcpu_arch for BOOKE.
Signed-off-by: Liu Yu <yu.liu@freescale.com>
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
The Book E code will be shared with e500.
I've left PID in kvmppc_core_emulate_op() just so that we don't need to move
kvmppc_set_pid() right now. Once we have the e500 implementation, we can
probably share that too.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Passing just the TLB index will ease an e500 implementation.
Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
