Add missing space after if, switch, for and while keywords.
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 4dec9b807b ("rfkill: strip pointless
notifier chain") removed the only user of rfkill_led_trigger() that was not
guarded by #ifdef CONFIG_RFKILL_LEDS. Therefore, move rfkill_led_trigger()
completely inside #ifdef CONFIG_RFKILL_LEDS and avoid the compile time
warning:
net/rfkill/rfkill.c:59: warning: 'rfkill_led_trigger' defined but not used
Signed-off-by: Simon Holm Thøgersen <odie@cs.aau.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some indexed registers do not have error bits. In these cases a
value of zero should be used for error checking.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The length field for these rings is 16-bits. If the length is
the max supported 65536 then the setting should be zero.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Shadow registers are consistent memory locations to which the chip
echos ring indexes in little endian format. These values need to
be endian swapped before referencing.
Note:
The register pointer declaration uses the volatile modifier which
causes warnings in checkpatch.
Per Documentation/volatile-considered-harmful.txt:
- Pointers to data structures in coherent memory which might be modified
by I/O devices can, sometimes, legitimately be volatile. A ring buffer
used by a network adapter, where that adapter changes pointers to
indicate which descriptors have been processed, is an example of this
type of situation.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'audit.b61' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current:
audit: validate comparison operations, store them in sane form
clean up audit_rule_{add,del} a bit
make sure that filterkey of task,always rules is reported
audit rules ordering, part 2
fixing audit rule ordering mess, part 1
audit_update_lsm_rules() misses the audit_inode_hash[] ones
sanitize audit_log_capset()
sanitize audit_fd_pair()
sanitize audit_mq_open()
sanitize AUDIT_MQ_SENDRECV
sanitize audit_mq_notify()
sanitize audit_mq_getsetattr()
sanitize audit_ipc_set_perm()
sanitize audit_ipc_obj()
sanitize audit_socketcall
don't reallocate buffer in every audit_sockaddr()
The enc28j60 driver doesn't check whether the length of the packet as reported
by the hardware fits into the preallocated buffer. When stressed, the hardware
may report insanely large packets even tough the "Receive OK" bit is set. Fix
this.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct two typos.
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Karsten Keil <kkeil@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch allows GRO to merge page frags (skb_shinfo(skb)->frags)
in one skb, rather than using the less efficient frag_list.
It also adds a new interface, napi_gro_frags to allow drivers
to inject page frags directly into the stack without allocating
an skb. This is intended to be the GRO equivalent for LRO's
lro_receive_frags interface.
The existing GSO interface can already handle page frags with
or without an appended frag_list so nothing needs to be changed
there.
The merging itself is rather simple. We store any new frag entries
after the last existing entry, without checking whether the first
new entry can be merged with the last existing entry. Making this
check would actually be easy but since no existing driver can
produce contiguous frags anyway it would just be mental masturbation.
If the total number of entries would exceed the capacity of a
single skb, we simply resort to using frag_list as we do now.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to allow GRO packets without frag_list at all, we need to
store the MSS in the packet itself. The obvious place is gso_size.
The only thing to watch out for is if the packet ends up not being
GRO then we need to clear gso_size before pushing the packet into
the stack.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Firmware blob looks like this...
u8 firmware_major
u8 firmware_minor
u8 firmware_fix
u8 pad
__be32 start_address
__be32 length (total, including BSS sections to be zeroed)
data... (in __be32 words, which is native for the firmware)
Signed-off-by: Jaswinder Singh Rajput <jaswinderrajput@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We store the firmware in its native big-endian form now, so the loop in
ace_copy() is modified to use be32_to_cpup() when writing it out.
We can forget the BSS,SBSS sections of the firmware, since we were
clearing all the device's RAM anyway. And the text,rodata,data sections
can all be loaded as a single chunk since they're contiguous (give or
take a few dozen bytes in between).
Signed-off-by: Jaswinder Singh <jaswinder@infradead.org>
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
Acked-by: Jes Sorensen <jes@sgi.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Thanks to excellent diagnosis by Eduard Guzovsky.
The core problem is that on a network with lots of active
multicast traffic, the neighbour cache can fill up. If
we try to allocate a new route and thus neighbour cache
entry, the bog-standard GC attempt the neighbour layer does
in ineffective because route entries hold a reference
to the existing neighbour entries and GC can only liberate
entries with no references.
IPV4 already has a way to handle this, by doing a route cache
GC in such situations (when neigh attach returns -ENOBUFS).
So simply mimick this on the ipv6 side.
Tested-by: Eduard Guzovsky <eguzovsky@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reflect the current situation where David Miller
is the sparc maintainer.
I have tried to contact Bill on following adresses:
wli@holomorphy.comwlirwin@us.ibm.com
with no success and Bill has not been active on the
sparclinux mailing list for a long time.
As sparc and sparc64 are unified I unified the two entries
in the MAINTAINERS file too.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ony difference is the size of the mode.
sparc has extra padding to compensate for this.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The module code relies on a non-failing stop_machine call. So we create
the kstop threads in advance and with that make sure the call won't fail.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Introduce stop_machine_create/destroy. With this interface subsystems
that need a non-failing stop_machine environment can create the
stop_machine machine threads before actually calling stop_machine.
When the threads aren't needed anymore they can be killed with
stop_machine_destroy again.
When stop_machine gets called and the threads aren't present they
will be created and destroyed automatically. This restores the old
behaviour of stop_machine.
This patch also converts cpu hotplug to the new interface since it
is special: cpu_down calls __stop_machine instead of stop_machine.
However the kstop threads will only be created when stop_machine
gets called.
Changing the code so that the threads would be created automatically
on __stop_machine is currently not possible: when __stop_machine gets
called we hold cpu_add_remove_lock, which is the same lock that
create_rt_workqueue would take. So the workqueue needs to be created
before the cpu hotplug code locks cpu_add_remove_lock.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
On 32bit (and sometimes 64bit) and with big kernel modules like xfs or
ipv6 the relocation types R_PARISC_PCREL17F and R_PARISC_PCREL22F may
fail to reach their PLT stub if we only create one big stub array for
all sections at the beginning of the core or init section.
With this patch we now instead add individual PLT stub entries
directly in front of the code sections where the stubs are actually
called. This reduces the distance between the PCREL location and the
stub entry so that the relocations can be fulfilled.
While calculating the final layout of the kernel module in memory, the
kernel module loader calls arch_mod_section_prepend() to request the
to be reserved amount of memory in front of each individual section.
Tested with 32- and 64bit kernels.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
When creating the final layout of a kernel module in memory, allow the
module loader to reserve some additional memory in front of a given section.
This is currently only needed for the parisc port which needs to put the
stub entries there to fulfill the 17/22bit PCREL relocations with large
kernel modules like xfs.
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (renamed fn)
Fix this warning:
kernel/module.c:824: warning: ‘print_unload_info’ defined but not used
print_unload_info() just was used when CONFIG_PROC_FS was defined.
This patch mark print_unload_info() inline to solve the problem.
Signed-off-by: Jianjun Kong <jianjun@zeuux.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
CC: Ingo Molnar <mingo@elte.hu>
CC: Américo Wang <xiyou.wangcong@gmail.com>
When there are two symbols in a module with the same name, one of which is
exported, both will be marked as exported in /proc/kallsyms. There aren't
any instances of this in the current kernel, but it is easy to construct a
simple module with two compilation units that exhibits the problem.
$ objdump -j .text -t testmod.ko | grep foo
00000000 l F .text 00000032 foo
00000080 g F .text 00000001 foo
$ sudo insmod testmod.ko
$ grep "T foo" /proc/kallsyms
c28e8000 T foo [testmod]
c28e8080 T foo [testmod]
Fix this by comparing the symbol values once we've found the exported
symbol table entry matching the symbol name. Tested using Ksplice:
$ ksplice-create --patch=this_commit.patch --id=bar .
$ sudo ksplice-apply ksplice-bar.tar.gz
Done!
$ grep "T foo" /proc/kallsyms
c28e8080 T foo [testmod]
Signed-off-by: Tim Abbott <tabbott@mit.edu>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Now that nothing depends on it any more, remove CONFIG_KMOD.
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Add standard interfaces for alarm/update irqs enabling. Drivers are no
more required to implement equivalent ioctl code as rtc-dev will provide
it.
UIE emulation should now be handled correctly and will work even for those
RTC drivers who cannot be configured to do both UIE and AIE.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Cc: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the write_begin/write_end aops, page_symlink was broken because it
could no longer pass a GFP_NOFS type mask into the point where the
allocations happened. They are done in write_begin, which would always
assume that the filesystem can be entered from reclaim. This bug could
cause filesystem deadlocks.
The funny thing with having a gfp_t mask there is that it doesn't really
allow the caller to arbitrarily tinker with the context in which it can be
called. It couldn't ever be GFP_ATOMIC, for example, because it needs to
take the page lock. The only thing any callers care about is __GFP_FS
anyway, so turn that into a single flag.
Add a new flag for write_begin, AOP_FLAG_NOFS. Filesystems can now act on
this flag in their write_begin function. Change __grab_cache_page to
accept a nofs argument as well, to honour that flag (while we're there,
change the name to grab_cache_page_write_begin which is more instructive
and does away with random leading underscores).
This is really a more flexible way to go in the end anyway -- if a
filesystem happens to want any extra allocations aside from the pagecache
ones in ints write_begin function, it may now use GFP_KERNEL (rather than
GFP_NOFS) for common case allocations (eg. ocfs2_alloc_write_ctxt, for a
random example).
[kosaki.motohiro@jp.fujitsu.com: fix ubifs]
[kosaki.motohiro@jp.fujitsu.com: fix fuse]
Signed-off-by: Nick Piggin <npiggin@suse.de>
Reviewed-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org> [2.6.28.x]
Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Cleaned up the calling convention: just pass in the AOP flags
untouched to the grab_cache_page_write_begin() function. That
just simplifies everybody, and may even allow future expansion of the
logic. - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The function viafb_cursor() uses 2 stack-variables of CURSOR_SIZE bits;
CURSOR_SIZE is defined as (8 * 1024). Using up twice 1k on stack is too
much for 4k-stack (though it works with 8k-stacks). Make those two
variables kzalloc'ed to preserve stack space.
Also merge the whole lot of local struct's in viafb_ioctl into a union so
the stack usage gets minimized here as well. (struct's are only accessed
in their indicidual IOCTL case) This second part is only compile-tested as
I know of no userspace app using the IOCTLs.
Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Cc: <JosephChan@via.com.tw>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As suggested by Andreas Dilger, introduce a bgl_lock_ptr() helper in
<linux/blockgroup_lock.h> and add separate sb_bgl_lock() helpers to
filesystem specific header files to break the hidden dependency to
struct ext[234]_sb_info.
Also, while at it, convert the macros to static inlines to try make up
for all the times I broke Andrew Morton's tree.
Acked-by: Andreas Dilger <adilger@sun.com>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: <linux-ext4@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Include header files as used/needed:
In file included from drivers/leds/leds-dac124s085.c:16:
include/linux/spi/spi.h:66: error: field 'dev' has incomplete type
include/linux/spi/spi.h: In function 'to_spi_device':
include/linux/spi/spi.h💯 warning: type defaults to 'int' in declaration of '__mptr'
...
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The flush_cache_vmap in vmap_page_range() is called with the end of the
range twice. The following patch fixes this for me.
Signed-off-by: Adam Lackorzynski <adam@os.inf.tu-dresden.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The race is calling cgroup_clone() while umounting the ns cgroup subsys,
and thus cgroup_clone() might access invalid cgroup_fs, or kill_sb() is
called after cgroup_clone() created a new dir in it.
The BUG I triggered is BUG_ON(root->number_of_cgroups != 1);
------------[ cut here ]------------
kernel BUG at kernel/cgroup.c:1093!
invalid opcode: 0000 [#1] SMP
...
Process umount (pid: 5177, ti=e411e000 task=e40c4670 task.ti=e411e000)
...
Call Trace:
[<c0493df7>] ? deactivate_super+0x3f/0x51
[<c04a3600>] ? mntput_no_expire+0xb3/0xdd
[<c04a3ab2>] ? sys_umount+0x265/0x2ac
[<c04a3b06>] ? sys_oldumount+0xd/0xf
[<c0403911>] ? sysenter_do_call+0x12/0x31
...
EIP: [<c0456e76>] cgroup_kill_sb+0x23/0xe0 SS:ESP 0068:e411ef2c
---[ end trace c766c1be3bf944ac ]---
Cc: Serge E. Hallyn <serue@us.ibm.com>
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Paul Menage <menage@google.com>
Cc: "Serge E. Hallyn" <serue@us.ibm.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Don't store the field->op in the messy (and very inconvenient for e.g.
audit_comparator()) form; translate to dense set of values and do full
validation of userland-submitted value while we are at it.
->audit_init_rule() and ->audit_match_rule() get new values now; in-tree
instances updated.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fix the actual rule listing; add per-type lists _not_ used for matching,
with all exit,... sitting on one such list. Simplifies "do something
for all rules" logics, while we are at it...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Problem: ordering between the rules on exit chain is currently lost;
all watch and inode rules are listed after everything else _and_
exit,never on one kind doesn't stop exit,always on another from
being matched.
Solution: assign priorities to rules, keep track of the current
highest-priority matching rule and its result (always/never).
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* don't bother with allocations
* don't do double copy_from_user()
* don't duplicate parts of check for audit_dummy_context()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* logging the original value of *msg_prio in mq_timedreceive(2)
is insane - the argument is write-only (i.e. syscall always
ignores the original value and only overwrites it).
* merge __audit_mq_timed{send,receive}
* don't do copy_from_user() twice
* don't mess with allocations in auditsc part
* ... and don't bother checking !audit_enabled and !context in there -
we'd already checked for audit_dummy_context().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* don't copy_from_user() twice
* don't bother with allocations
* don't duplicate parts of audit_dummy_context()
* make it return void
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
No need to do that more than once per process lifetime; allocating/freeing
on each sendto/accept/etc. is bloody pointless.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The subdevice removal functions are marked __devexit but are referenced
from the error handling path when probing so are needed even when
__devexit functions are removed.
Signed-off-by: Mark Brown <broonie@sirena.org.uk>
Acked-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
There's no point in including the linux/swiotlb.h header twice in
lib/swiotlb.c - this patch gets rid of the unneeded include.
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
