Several logs show up repeatedly in dmesg. Reduce the following logs to
help avoid spamming dmesg:
* wlan_ipa_wdi_meter_notifier_cb()
* hdd_print_netdev_txq_status()
* hdd_wlan_start_modules()
* hdd_wlan_stop_modules()
* csr_nonscan_pending_ll_peek_head()
* sme_qos_statustype()
Change-Id: Ic5ca059f258dee92ffaa4b0ecca47df41b424c11
CRs-Fixed: 2292710
The Driver Synchronization Core (DSC) is a set of synchronization
primitives for use by the driver's orchestration layer. It provides APIs
for ensuring safe state transitions (including bring up and tear down)
of major driver objects: a single driver, associated psocs, and their
associated vdevs.
APIs are divided into two categories: mutual exclusion of conflicting
transitions, and operation tracking, blocking, and waiting capabilities.
For part 5, add the unit test implementations.
Change-Id: Ia68d6df18894b254c1f5fe3855d896e96be38a90
CRs-Fixed: 2290260
The Driver Synchronization Core (DSC) is a set of synchronization
primitives for use by the driver's orchestration layer. It provides APIs
for ensuring safe state transitions (including bring up and tear down)
of major driver objects: a single driver, associated psocs, and their
associated vdevs.
APIs are divided into two categories: mutual exclusion of conflicting
transitions, and operation tracking, blocking, and waiting capabilities.
For part 4, add the vdev-level implementation.
Change-Id: I3f5ef0f7abf24a45d757d286d450ef086640c56a
CRs-Fixed: 2290260
The Driver Synchronization Core (DSC) is a set of synchronization
primitives for use by the driver's orchestration layer. It provides APIs
for ensuring safe state transitions (including bring up and tear down)
of major driver objects: a single driver, associated psocs, and their
associated vdevs.
APIs are divided into two categories: mutual exclusion of conflicting
transitions, and operation tracking, blocking, and waiting capabilities.
For part 3, add the psoc-level implementation.
Change-Id: I30406c61e89cc220a2697e13f38289554985a7bf
CRs-Fixed: 2290260
The Driver Synchronization Core (DSC) is a set of synchronization
primitives for use by the driver's orchestration layer. It provides APIs
for ensuring safe state transitions (including bring up and tear down)
of major driver objects: a single driver, associated psocs, and their
associated vdevs.
APIs are divided into two categories: mutual exclusion of conflicting
transitions, and operation tracking, blocking, and waiting capabilities.
For part 2, add the driver-level implementation.
Change-Id: I86630edfe11e89cc035974ae76ed3908cf68cde4
CRs-Fixed: 2290260
The Driver Synchronization Core (DSC) is a set of synchronization
primitives for use by the driver's orchestration layer. It provides APIs
for ensuring safe state transitions (including bring up and tear down)
of major driver objects: a single driver, associated psocs, and their
associated vdevs.
APIs are divided into two categories: mutual exclusion of conflicting
transitions, and operation tracking, blocking, and waiting capabilities.
For part 1, add common infrastructure and headers.
Change-Id: Id290e66d2dccd28b89fed5f285d3692ff3c814e7
CRs-Fixed: 2290260
A number of HDD and IPA logs are generally unnecessary and have been
identified as contributing to log spam. Reduce these log messages to the
debug level.
Change-Id: I2f92bb4caec5adc65fdad0146298aa5f88b43def
CRs-Fixed: 2288430
Add per module logging macros without function/line info
to avoid adding function/line info where it is not required.
Change-Id: Id808fef623b82cec38fc31071ef384f3ff0c92da
CRs-Fixed: 2278874
When wlan driver unloading is in progress, IPA_OPCODE_TX/RX_SUSPEND
will not be processed and resource_unloading may be left as true.
Moroever since driver will be unloaded, IPA_OPCODE_TX/RX_SUSPEND
interaction between Host and FW will not be necessary.
Fix is to disable IPA pipes directly when handling disconnection
if wlan driver unloading is in progress.
Change-Id: Ia4af1ab04052b1a9bab44105760de50ad6263dbb
CRs-Fixed: 2279044
Map all enter/exit log macros to enter/exit QDF TRACE macro
to provide option to compile out enter/exit logs if required.
Change-Id: I0c6cd633705e820fcfeb47e3f81a3522c9ef1974
CRs-Fixed: 2274850
Add support for action OUI extensions which can be used by station
to control mode of connection, connected AP's in-activity time and
Tx rate etc.,
Change-Id: Ie85e29c4b0ed7ac2815709d7a4e607c4ba46c6ca
CRs-Fixed: 2254502
Currently, errors are logged if a given offload feature is disabled
while suspending the wlan driver. Instead, simply return success for the
configuration of those features which are disabled, since nothing needs
to be done. This also has the side effect of avoiding meaningless error
logs for situations which are not error conditions.
Change-Id: I1d897d8db066e642e1cc6e77daff0f44172cefe8
CRs-Fixed: 2282040
Multicast address filtering only makes sense if the interface is
connected and capable of receiving traffic. Avoid enabling/disabling
the multicast address filter list on an interface that is disconnected.
Change-Id: Id8aff136e920bb726b8c7dd539d477ff44f080d4
CRs-Fixed: 2282003
Currently the host sends the fixed gtk offload params
and the FILS TLV params, even when the FILS feature is disabled
in the host, which force firmware to pick the KEK from the
FILS TLV structure rather than from the fixed param structure,
which further leads to GTK re-keying feature fail.
Fix is to send only the fixed params in case when host doesnt
supports FILS.
Change-Id: I5b3b3fd503c7cb9c4d7933074fd483086b113204
CRs-Fixed: 2244725
ipa_is_fw_wdi_activated is invoked in the context of default 100ms
bus bandwidth calculation timer. Any logs will lead to excessive
messages and fix is to ratelimit these possible log messages.
Change-Id: I6e408187759bb6b6a5c511f2f88c2b14f4c889ab
CRs-Fixed: 2279024
QDF_DEBUG_PANIC has recently gained a reason parameter. Move instance of
logging followed immediately by QDF_DEBUG_PANIC to single calls.
Change-Id: I6633296fb1c82a3945cedc967de222410b9f5d9b
CRs-Fixed: 2274413
Enable the converged configuration component in the Kbuild. Also, hook
into the cfg parse and release APIs.
Change-Id: Id0df669a34463e9f51bd5cc5bf2939fb1ac6228d
CRs-Fixed: 2258233
There will be excessive logs in exception path when running SAP embedded
traffic since these logs are per packet.
Fix is to ratelimit all logs in IPA exception path to avoid excessive
logs.
Change-Id: Ia96a60f4de145740d7099b432c92e7b5785047d2
CRs-Fixed: 2272014
User can override the Listen Interval value set during association
by using wifi config set vendor command. Since there is no limit
check in host, a very high value causes an assert in the Firmware.
Add an upper limit check on the user Listen Interval value.
Change-Id: I8128ccbb875adf57c95a15d0391fb442d3dbbbc3
CRs-Fixed: 2256334
WLAN logs are excessively filled with
IPA logs when IPA performance level
is set.
Remove unnecessary logging in
hdd_ipa_set_perf_level().
Change-Id: I07563c1a6e98981e2b074bce7a969c9cbd94ec24
CRs-Fixed: 2268632
Map all module level log APIs to per-level log APIs
to compile out specific log level if required.
Change-Id: Icfcc28fb592ee99704d8fb23bc3cb45b6e4c9f53
CRs-Fixed: 2266718
The change id I50c357ca0f8ddfcc1a51ad4ed040961daf052459
is missed as part of UMAC IPA componentization changes.
Propagate the missed change to IPA component.
Change-Id: I33d83b5777ea259e29175e632a36e5fec3be24bc
CRs-Fixed: 2262351
Currently while going to suspend, dtim parameters are not
correctly getting configured. Some other parameters to config
like the inactivity timeout are completely skipped as well.
Cleanly port the setting of dtim and other parameters during
suspend and resume.
Change-Id: Ic41a8ace3f5650e53f2dcaa416bfe241b87aa88d
CRs-Fixed: 2248160
The tSirRetStatus definitions are obsolete, so replace them with
QDF_STATUS definitions in the pmo component.
Change-Id: Ia23e1d0eed5a88b0cb1caf4feebd535d36ca2690
CRs-Fixed: 2261705
In case of rmmod if stop bss fails SAP IPA interface is not
deleted. So again at next driver load IPA will be holding the
stale IPA header and new IPA header will not be added at IPA
interface creation. In this change clean IPA interface when SAP
stop bss fails.
Change-Id: I3a1bf891752308ba1a29d6768f24880d8514d5bf
CRs-Fixed: 2224307
Before wow enable or pdev suspend host sets hardware filter bitmap
and enables the filter via a command. But after resuming it sends
bitmap as zero with filter disable. This is interpreted by Firmware
as disable the modes set in the bitmap, so none of the modes are
disabled. With this host will not receive bc/mc packets after
disabling the hw filter, which it is expecting.
Send the same bitmap after resume that was used before suspend.
Change-Id: Ic7425274c9197e907404c3ca9ba0d5269ee51690
CRs-Fixed: 2194964
Some times HTT response for suspend IPA pipes from FW host arrives
after vdev has been cleaned up at FW. After receiving FW HTT IPA
pipe suspend response HOST processes pending events. For event AP
DISCONNECT HOST sends IPA offload disable command to FW with vdev
id that has been deleted at FW. As a result FW asserts.
In this change before processing IPA WLAN pending events validate the
session. If session exists then only process the events.
Change-Id: I464a91c3a85e6002297d9ade2fbd45b45a2a4d51
CRs-Fixed: 2261111
In implementation of Android Packet Filter, functions, variables,
definitions are named after BPF, which stands for Berkely Packet
Filter. The term was more appropriate for Link Layer packet
filters implemented in the Linux kernel, known as Linux Socket
Filters.
The term BPF is obsolete now, so rename it with the
appropriate acronym, APF.
Change-Id: I9e02edbc580ffb2c559c8e864f54d255fc2d51a3
CRs-Fixed: 2191530
PMO should not know about vdev data path handle, but
pmo_unpause_all_vdev() need it, so register a wma callback to retrieve
the vdev dp handle instead of keep a copy in pmo vdev private context.
Refine current code to retrieve vdev dp handle using a wma callback
Change-Id: I1f668fff633a5e5cdfc478e7f619e9600930b333
CRs-Fixed: 2227384
There are several logs in PMO that log debugging related information
at the INFO level. Reduce the logging level of these debug logs to
avoid spamming the console.
Change-Id: Ib1bb9279d5d8104104b58bd2c83869f72c0bde4a
CRs-Fixed: 2260190
Add support for getting cfg integer from PMO. Register callbacks
during pe_open/close so that PMO can query CFG int values for
calculating parameters like listen interval etc.
Change-Id: I52d165586576e547e175ba276e6b7225db5b27e0
CRs-Fixed: 2252661
With IPA WDI unified API, IPA PM is used instad of IPA RM
for power/resource management. When checking if IPA clk
scaling is enabled or not, HDD_IPA_RM_ENABLE_MASK is thus
not applicable for WDI unified API.
Change-Id: Ie18c2ba6168a06a3bf03f6a5754ffef98113ce30
CRs-Fixed: 2256015
With IPA WDI unified API, IPA PM is initialized after WLAN IPA pipes
are connected. Initializing IPA perf profile will fail if IPA pipes
are not yet connected.
Fix is to
1. Initialize perf perofile only after IPA pipes are connected
successfully.
2. If clk scaling is disabled, initialize perf level to maximum.
3. Allow driver to proceed if perf profile initialization fails.
Change-Id: I3a63e0f1decec10440467da62cb6ccf740eda318
CRs-Fixed: 2258682
Currently while sending wmi command when target is suspend, it will
check whether command is WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID/
WMI_PDEV_RESUME_CMDID, but D0WOW command is an exception, to keep align
with legacy code so don't set wmi_handle->is_target_suspended if it is
D0WOW enable command.
Move out logic of checking D0WOW status from PMO tgt to core layer.
Change-Id: I164f24ea733e54e5e0dbdb77344917df5d039e53
CRs-Fixed: 2254047
There are several logs along the suspend/resume code paths that log
debugging related information at the INFO level. Reduce the logging
level of these debug logs to avoid spamming the console.
Change-Id: I0e81901e4a053038392c1012600ae125a1ad27a3
CRs-Fixed: 2258093
Total 16 number of WoW filters are PoRed for Genoa.
Define CONFIG_PMO_WOW_FILTERS in genoa defconfigs with value 16.
Change-Id: Iba3d9875c954b32a3f22cfd639f4508beb36a5d5
CRs-Fixed: 2257033
Current ucfg API's that disables wow events accept a u32 bitmap
variable. A pointer to that variable is passed to core API where
it assumes it as a u32 array of 4 bytes. This will lead to out of
bound memory access.
Change wow enable/disable API's to accept wow event type as the
parameter.
Change-Id: I220aaddfea62ab96f121014d0d65a1406988c946
CRs-Fixed: 2233108
In the case of invalid iface_ctx, the stats reset operation is not
needed, so removed it.
Change-Id: I48b4b42717451e1ccbfc9753147e65d35ff78df4
CRs-fixed: 2254683
When running embedded tput between client and SAP, there'll be
excessive logs per packet. Fix is to remove the per packet
debug message.
Change-Id: I846f4fd5e54cc8945b3159c56e04418feea0183f
CRs-Fixed: 2253186
Fix a few things in one shot.
- clean up some code to avoid potential NULL pointer dereference.
- add a helper function - wlan_ipa_free_tx_desc_list() to
avoid duplication.
- rearrage wlan_ipa_teardown_sys_pipe() to allow others' reference
Change-Id: I9d6391a7f20ae427bf59f07958bd13f349e61d83
CRs-Fixed: 2233867
In function wlan_ipa_uc_loaded_handler,the qdf_dev is as return of
wlan_psoc_get_qdf_dev(),which maybe NULL,then NULL reference could
occur later.
Change-Id: I3c6d5af35934deef643cb600b1966c22769c71ed
CRs-Fixed: 2250977
