Suspend type should be CDF_SYSTEM_SUSPEND. Host gets
stuck while trying to post runtime suspend messages.
Change-Id: I5deeba401b7bda2a057802389d620149a92fcfbc
CRs-Fixed: 970656
Conditional compilation option WLAN_FEATURE_VOWIFI_11R is always
defined in cld3.0 and underlying code is permanent in the driver.
Hence, remove #ifdef WLAN_FEATURE_VOWIFI_11R check from SME source
code.
CRs-Fixed: 960105
Change-Id: Ib42c92aaca69c04b98dd42b7aab2a552c88af24e
Conditional compilation option WLAN_FEATURE_VOWIFI_11R is always
defined in cld3.0 and underlying code is permanent in the driver.
Hence, remove #ifdef WLAN_FEATURE_VOWIFI_11R check from HDD source
code.
CRs-Fixed: 960105
Change-Id: Ifdad17f5b85148dfa4bb459939168beec4b5b1cf
Conditional compilation option of #ifdef WLAN_FEATURE_VOWIFI_11R_DEBUG
is used to enable certain roaming logs. It has always been defined,
thus these logs are enabled by default.
Remove it from all the code to always enable those logs.
CRs-Fixed: 936683
Change-Id: I23bba225ce69311d416e6d847c398840919c43aa
The condition #ifdef WLAN_FEATURE_LFR is used to include some of
the roaming code. It has been defined for all the recent driver
builds. Roaming code underneath is permanent part of the driver.
Similarly code under WLAN_FEATURE_NEIGHBOR_ROAMING is permanent
part of the driver.
Remove FEATURE_WLAN_LFR and WLAN_FEATURE_NEIGHBOR_ROAMING compiler
flags from Kbuild script.
All the instances of above flags are presumed to be removed
from the driver source code prior to this change.
Remove WLAN_FEATURE_NEIGHBOR_ROAMING_DEBUG compiler flag from
Kbuild and csr_neighbor_roam.c and permanently enable roaming
debug logs.
CRs-Fixed: 936683
Change-Id: Iec251c2a4439ab3d492d9700d242aad401a0dbe0
The condition #ifdef WLAN_FEATURE_LFR is used to include some of
the roaming code. It has been defined for all the recent driver
builds. Roaming code underneath is permanent part of the driver.
Remove #ifdef FEATURE_WLAN_LFR compiler flag from MAC so that the code
will always be compiled in.
CRs-Fixed: 936683
Change-Id: I6e5afb8eeb5f4f3a0bb7f7b007ffb07cbeff1adf
The condition #ifdef FEATURE_WLAN_LFR is used to include some of
the roaming code. It has been defined for all the recent driver
builds. Roaming code underneath is permanent part of the driver.
Removed 2 instances of FEATURE_WLAN_LFR that were not removed
in the previous change.
CRs-Fixed: 936683
Change-Id: Ic1550cc4f15ebd835f24a1cadb7d6bd5ed45edab
Use single channel scan request for preauth operation, similar to
remain-on-channel. Remove all roaming preauth logic from WMA.
Change-Id: Ie3783306e0ff5b8a5bbcb6437e982590b03fe040
CRs-Fixed: 957094
Commmit: 6eb1813 ("cfg80211: add bss_type and privacy arguments in
cfg80211_get_bss()")
This commit update the new bss_type and privacy argument and is
merged in Kernel 4.1, so adding the Kernel version check accordingly.
Change-Id: I2bda71fc3cb2e126a1059a963f72f7a194bf9580
CRs-fixed: 963677
This CDF_TRACE macro is declared in i_cdf_trace.h and is used
when MSM_PLATFORM is not enabled.
But the inclusion is not in the cdf_nbuf.h, so that it causes
the compilation issue, while CDF_TRACE is not found.
Since this function is used on the data path, so that the warning
is not necessary for non MSM platform.
And also refactor it to avoid compile flag inside the function.
Change-Id: I061eb35f5eee21c76fd486d378e53b35c02b5636
CRs-fixed: 966754
Commit: 78d28e6 ("kill f_dentry macro")
Above commit is to remove the marco of f_dentry since Kernel 3.19.
Avoid to use the Kernel version check by using the field directly.
Change-Id: I7a4b45c62afed402d49d709bb1cb870db352b70e
CRs-fixed: 966066
hif_bus_prevent_linkdown() calls to cnss_wlan_pm_control(), which
is only defined when CONFIG_PCI_MSM is enabled, fix the conditional
compilation.
Also fix a typo of RUNTIME_PM to FEATURE_RUNTIME_PM.
Change-Id: I9d4cd65ee0020ca1b41d026c3124317ce854ea92
CRs-fixed: 966771
Set the maximum active session count to 3. All the sessions may or
may not be in connected state.
Change-Id: I3f348228fbdf787da0e4c954cb243b2252af9524
CRs-Fixed: 967911
qcacld-2.0 to qcacld-3.0 propagation
Add support to handle an error indicated by the fw in offload mode.
In this case - MIC error type.
Change-Id: I53363bdbaafad7fab0a6e067a43892a3066abbb6
CRs-Fixed: 791274
qcacld-2.0 to qcacld-3.0 propagation
Add the roaming abort command to the allowed commands
list and pass on the request to the firmware
CRs-Fixed: 943717
Change-Id: I711d3bd8629813af71e4db8659a1915ccfeaaa72
Remove direct call to CE debug routine from ol_fw
and hif main layer. Abstract the bus debug dump
register routines to respective hif-bus layer.
CRs-Fixed: 964031
Change-Id: I8b6f325f12aaa99e4f7461f9da26b7f60259c8f8
qcacld-2.0 to qcacld-3.0 propagation
print TX/RX packet count values during get_station
function call to help in debugging data path issues.
Change-Id: I0798123f96111bbadc4014f5f04193d88977a38b
CRs-Fixed: 956473
11P channels are wrongly retrieved along with other valid channels
while using csr_get_cfg_valid_channels function call.
AS per the current implementation the above function call is used
to get the valid channel used for scan and roaming scenarios. Since
11P channels are not valid in scan and roaming scenarios
csr_get_cfg_valid_channels function is updated to retrieve non 11P
valid channels.
Change-Id: I25567b2791ac776480534534e10d900c2f9a6184
CRs-Fixed: 965218
Fix memory leak in OEM data request, by freeing data buffer as message
passed down the layers is consumed in lower layers.
Change-Id: I8e8dc0c96de3055fada2c19139bc9e0c03b9e73e
CRs-Fixed: 964290
Add support to use fine timing measurement capabilities coming
from the Firmware.
Currently INI config is being used for setting initiator
and responder roles. With this change, intersection of INI
config and FW indicated capability will be used.
Change-Id: If20bc8de2b6ec12bc638b75806e2a870a5ebc189
CRs-Fixed: 942290
- Add handler for the vdev delete and peer delete response at WMA.
- As part of timeout handler, assert if the response is not
received in 3 seconds.
Change-Id: I7b20254013266414174f686e1f3918822adc65d8
CRs-fixed: 960173
eCSR_AUTH_TYPE_RSN_8021X_SHA256 is defined only when 11W feature
is enabled. The code is using the identifier
eCSR_AUTH_TYPE_RSN_8021X_SHA256 without conditional compilation.
Access eCSR_AUTH_TYPE_RSN_8021X_SHA256 under 11W feature flag.
Change-Id: I5e1e513c12cf526045991749a487ac89d1773659
CRs-Fixed: 947938
qcacld-2.0 to qcacld-3.0 propagation
"cfg80211_chandef_create" doesn't support channel width "HT80". If
create chandef by it, channel width set to HT40 when working on
SAP VHT80 mode. Which cause a mismatch between supplicant and host
driver. Update channel width and center freq for VHT80 mode
Change-Id: I9c5734fca4bcc02436aea8684ca9d0b968eb1dee
CRs-Fixed: 944618
qcacld-2.0 to qcacld-3.0 propagation
If a connect is received with previous connect already in progress,
sta connect state is moved from connecting to disconnecting and
disconnect is initiated to stop the previous connect.
If previous is present in sme/roam pending queue the disconnect
will abort the previous connect by removing the cmd from pending
queue. In this case the connect state is not moved back to
not connected from disconecting.
Thus the current connect command fails and all new connect command
will fail as the connect state will always be in disconnecting state.
To avoid this, move the connect state to not connected, once try
disconnect is issued internally.
Change-Id: Ia563f85df84cb9dbb3d3a82bc97127d39e7b1421
CRs-Fixed: 961559
The condition #ifdef WLAN_FEATURE_LFR is used to include some of
the roaming code. It has been defined for all the recent driver
builds. Roaming code underneath is permanent part of the driver.
Remove #ifdef FEATURE_WLAN_LFR compiler flag from HDD so that the code
will always be compiled in.
CRs-Fixed: 936683
Change-Id: If5010bc1470a35b2f1516a5c5d10461352fd87fc
RRM ie should not be present in association req if AP doesn't
support 11k. As a part of fix add the check to append RMM ie only
if AP support 11k.
Change-Id: I4e521dbdbdd5b083360405f26913278788c86555
CRs-Fixed: 961737
For iHelium, the flag AR900B is defined in the firmware however
it is not defined on the host. This is causing a mismatch in the
statistics structure between the host and the firmware.
Temporarily enable this flag on the host. Eventually, this flag will
be replaced by a iHelium specific flag on both the host and the firmware
CRs-Fixed: 964909
Change-Id: I1a13db22448a099ea51602108eb5626e878e2c2e
IPA callbacks need to be processed in tasklet
context in NON-SMP configuration as rx thread
is not used in NON-SMP context.
Hence Process IPA uc response in tasklet context
for NON-SMP configuration.
CRs-Fixed: 960302
Change-Id: I98d69dbdc1083f43035fe264bbee668e5efd5eee
Introduce DFS-3 support changes in DFS layer.
Add support for per segment based queuing, processing
and pattern matching of the radar events in 80+80 channel
width mode, when both segments are dfs.
Also, add support for parsing the new DFS-3 radar summary
report and extract the segment ID on which a phyerror is
seen. Report the segment ID on which the radar has been
detected to the WMA layer to add only radar detected 80MHz
segment channels to be added to NOL in 80+80 MHz channel
width mode.
Change-Id: Ib9ed2122844cef5fde2b632accc8c798e86bf7a3
CRs-Fixed: 964262
Adding support for parsing the WMI_PHYERR_EVENTID
for DFS-3 in WMA event handler. Configure the hw
board id to DFS module fetched from the wmi service
ready event.
Change-Id: I003fab790c7f46b54e5d41bcf1bbfa16f0cdc722
CRs-Fixed: 964262
qcacld-2.0 to qcacld-3.0 propagation
The sap Context related phyMode should be used
instead of the phyMode in hal. Otherwise, the incorrect
channel width will be reported to supplicant.
Change-Id: Ic0ce7861a786de5aef8b43c6aa0fde9f600b08b2
CRs-Fixed: 909668
hif_claim_device does not serve a purpose in copy engine.
The usage and implementation of hif_claim_device need to be
reexamined for sdio and usb. It should not store the device
in a ce specific data structure.
Change-Id: I0847e152ae3a1ca57d5c6937d6929918063cc362
CRs-Fixed: 967244
cds_get_context was not supporting epping. Allow epping to manage its
own global context since it is a top level module.
Change-Id: Ic5faf885c83109162be141788a5f8871a4e35cef
CRs-Fixed: 967244
Currently Tx beamformee feature is enabled only in STA mode.
Add knob to enable or disable the Tx beamformee feature in SAP
mode
Change-Id: I6ea218b3bff6c973688aad716a3f1a3c8acc469b
CRs-Fixed: 963034
Fix memory leak in case of txrx_fw_st_rst command where
we are not expecting any response from firmware.
CRs-Fixed: 964465
Change-Id: Iad91cb5557ef167d126ef68e07f02445ad7a0b97
Remove unnecessary acquiring of SME lock in sme_roam_free_connect_profile
since this function does not access any SME structures.
Change-Id: I0ddafc4276ef5028b48fda0ae3ea4e6a0c23245e
CRs-Fixed: 958839
Add new argument for mac_ctx in definition of tx_timer_create macro
so that its caller can use any local variable name for mac context.
Currently pMac is hardcoded as first param in definition of the macro
which prohibits caller of that function from using any other name.
Change-Id: Id901424ba16846eab62c00a80d48a5c85c73bea6
CRs-Fixed: 824222
In case kmalloc fail goto end of function and properly free
other possible allocated memory buffers.
Change-Id: I41d7577471b475b0a2a0daa83c6ffc845314ceb4
CRs-Fixed: 958755
Rename API cds_is_load_unload_in_progress() to
cds_is_load_or_unload_in_progress() for clarity purpose.
Change-Id: I209c661ccee760f822d5df53577d822f3c741b37
CRs-Fixed: 964217
