Replace obsolete WMA_LOGA() macro with wma_alert().
In some error cases, usage of wma_alert() is incorrect and
hence use wma_err().
Change-Id: Ife02033c4f981c31f5e6b165d5e8961e2ce1f9d8
CRs-Fixed: 2716176
After the roaming is offloaded to Firmware when the GTK rekey
happens in Host proper KCK should be used to verify MIC.
In WPA2 GTK rekey is offloaded to Firmware but not in WPA3 case.
In WPA3 SuiteB Firmware sends KCK in Key material extended TLV
instead of Key material TLV in Roam sync indication event, as the
Keys length is more in WPA3 SuiteB. And the Key material ext TLV
is parsed improperly in driver and the same is sent in roam+auth
event to wpa_supplicant. This wrong KCK was used to verify MIC
received in EAPOL.
This fix is to properly parse the KCK and KEK from Key buffer.
Change-Id: I57658b918bb41de2b5d2476d89b026d1f5982337
CRs-Fixed: 2713711
For non-DBS and no Interband MCC supported targets, send only
PCL to supplicant when number of connections are more then 0.
Change-Id: I12b1d483de55cca2d70d17d7114bdbde72c59826
CRs-Fixed: 2711485
For single-MAC and no-interband MCC scenario, don't switch
channel for STA if the new channel is creating interband-MCC
concurrent combination.
Change-Id: I6886d58dfe8a8845bcded90ab3422b5f79abbe4a
CRs-Fixed: 2711469
hdd_wlan_clear_stats() invokes the function cdp_clear_stats(),
hdd_wlan_clear_stats() always returns 0 instead of returning the
callee return status.
Fix is to return the callee function return status up the call stack.
Change-Id: I591fb743d000463ffebd4207450de82ab7463a9c
CRs-Fixed: 2719088
Add dp_aggregation sysfs entry under the wifi sysfs
directory to dynamically control aggregation in the
rx direction.
Change-Id: Ic7b13806f5fbd19fe5c56cabdf71d032b730448c
CRs-Fixed: 2718131
Add support to dynamically control fisa aggregation in
the rx direction based on the dp_aggregation sysfs entry.
Change-Id: I677b8b5f05e6cd849671a058b5e6ef07fc14a969
CRs-Fixed: 2718132
Fix for null object dereference. Check for null wlan
kobject and return if true.
Change-Id: I90477335c81d44b9cc2762dd4060d9447a0bdb66
CRs-Fixed: 2717466
When wep_default_key is not set as 0 in hostapd.conf, wep key with
key id 0 should not be sent to FW when new station is connected.
Wep key with key id specified in hostapd.conf should be sent to FW.
To fix this issue, wep default key id should be saved for sap mode.
When reference station is connected, set default key id related key
to FW with TX_USAGE flag.
Change-Id: Ic13e311593154911ee21db5172188c7037f429a3
CRs-Fixed: 2700441
PKTLOG can be enabled from both 802.11 and WEXT, customer
integrates pktlog ctrl in script and is toggled frequently.
This leads host pktlog status variable and FW status out of
sync. Host bus vote logic need disable pktlog when TPUT is
high, based on host status. At last, it will not take effect,
KPI continues dropped by PKTLOG.
Change-Id: Ifad7b53060b6046361621bf927c99b6b66e0c278
CRs-Fixed: 2715362
Currently when enable FISA debug, the default log level is
QDF_TRACE_LEVEL_ERROR which will output excessive logging
to kernel console, back pressure for RX might happen.
Degrade log level to QDF_TRACE_LEVEL_INFO_HIGH.
Change-Id: I5e910a6fc12d29179d3737f0c1d6c61b1383110b
CRs-Fixed: 2716688
Currently the driver supports the dynamic
configuration of nss and chain to FW for
VDEV if the FW advertises the capability
of supporting the same. However there is
no support to overide this.
Fix is to have an ini to enable/disable
this feature of configuring the dynamic
nss and chains to FW.
Change-Id: I0b84bb5aec53966a43a00c11d4aba3863414005c
CRs-Fixed: 2708303
When roam invoke fails during handoff, firmware sends HO failure
indication to host. Here the roam_invoke_in_progress flag is not
cleared.
Clear the roam_invoke_in_progress flag when fastreassoc fails
due to handoff failure at firmware.
Change-Id: Ifc0ade939980138f64013299a9ea4e97468ce00f
CRs-Fixed: 2715281
Replace wlan_reg_is_24ghz_ch with wlan_reg_is_24ghz_ch_freq.
Replace channel with frequency in cds_get_vendor_reg_flags.
Change-Id: I72ffc5550e45be1edf460f9619fead8889cf2967
CRs-Fixed: 2714723
As a part of LL stats get NB operation, the driver sends the LL stats
req to the FW, waits for the response and sends back the stats in a
synchronous reply. All this happens as a part of one single NB
operation.
Within this operation, if an rmmod comes, there can be a possiblity
of a memory leak. In function hdd_link_layer_process_radio_stats, there
is a check to validate the hdd_context and return if the driver is
undergoing load/unload. As a part of the premature return, some stats
are not returned to user space..
To resolve this, remove the validity check from the NB operation. The
operation itself comes with DSC synchronization and ensures that the
hdd_context remains valid atleast until the operation is complete. Thus
there is no need for the redundant check of validity of hdd_context.
Change-Id: I20cc85b715330a28bc077ca47a1721343bba7214
CRs-Fixed: 2714136
Truncation will happen when assining an association id over 256
to the u8 'aid' of struct wma_txrx_node.
To avoid such issue, change the type of 'aid' in struct wma_txrx_node,
from u8 to u16.
CRs-Fixed: 2713427
Change-Id: If360c017700aadaf9f2d3216601a011704f68180
Regression of Change-Id:
I1de3f71ca96de9f464d5d33b0271f99c55cff535
make LFR2 roam scan mode config
WMI_ROAM_SCAN_MODE_RSSI_CHANGE depend on roam_force_rssi_trigger
which is uninitialzed when LFR3 disabled, so roam scan mode 0
is sent to F/W wrongly in WMI_ROAM_SCAN_MODE when LFR2 enabled.
Fix: Initialize roam_force_rssi_trigger in roam offload scan
request with ini config for LFR2 too.
Change-Id: Ifd65119a87a6a348a952a4eec70a336015192d43
CRs-Fixed: 2704513
Presently, in the host initiated recovery the handler checks whether
the support for recovery is enabled via the ini or triggers the panic.
Whenever the panic is triggered the irq's will be disabled,
this results in some targets not able to collect the important
MHI, PCI information on what caused the issue to root cause the issue.
So, for different targets check the ini at different places.
Change-Id: I0d0e322610abd9f8ceaba4fe9688cdd099c381e5
CRs-Fixed: 2715603
