Disable source tracking get functionality for sdm855 till
feature is completely enabled
Change-Id: Id644fa46d95bd1091502b1c5ae4cce3bb64d633e
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Add codec entry for AQT1000 codec to support ADIE calibration.
Add new hwdep node AQT1000_CODEC_HWDEP_NODE to store ANC/MBHC
calibration data.
Change-Id: I8b5ff9a2cfe2a0a8ac593b63b20b28697dc975bf
Signed-off-by: Meng Wang <mwang@codeaurora.org>
AQT1000 codec is a hifi headset that supports audio
playback and recording on headset. It also supports
playback of fractional sampling rates. Audio playback
and recording is transferred through I2S interface.
Add driver for AQT1000 codec
Change-Id: Iba163e9203d67216cdbf87727b06801356a001e3
Signed-off-by: Sudheer Papothi <spapothi@codeaurora.org>
Between Linux-4.9 and Linux-4.14, upstream has updated the
ION APIs significantly to make ION ready to bring out of
staging folder. This has changed the way ION and dma_buf
APIs used to work together for allocating, mapping and
deallocating ION buffers.
Update MSM Audio ION wrapper functions used by audio drivers
to reflect these ION API changes as per upstream ION.
Change-Id: I63097e147a397aa3a538f69ac88b6fb10871c3dc
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Add changes to support wcd9360 audio codec driver in
wcd9xxx common files.
Change-Id: I5b9f9d592b6843d7887eb3954d079776ddf15764
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
snd_pcm_ops copy interface used by msm platform drivers is replaced
with copy_user in msm-4.14. Unit of two input variables is changed
from frame count to byte.
Update all the related msm platform drivers to adapt to this change.
Change-Id: Icecd0454c7a80e5ee90407c64aaf1ca76d2d9815
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Re-factor audio clock driver to register one clock at a time
and remove duplicate lpass clocks.
Change-Id: I63ddf4b65ec7e9cda0dcad4e0167cd8636e89e1a
Signed-off-by: Vidyakumar Athota <vathota@codeaurora.org>
ADM calibration is not sent in audio recording
use case which leads to low volume issue.
Since the LSM port ID is same as audio recording
port ID in case of internal codec, driver tries to
send LSM calibration for non LSM use case in which case
no calibration will be sent.
Instead of using port ID, use the pass_thr mode to
differentiate between LSM and non LSM use cases.
CRs-Fixed: 2167317
Change-Id: I1b6ea51d83330f6439791cf1bb6170306f6895b0
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
For MI2S shutdown, if clock disable is failed,
do not bother to re-increment clock reference. Otherwise,
next time when startup is called, clock enable will not
be called again, so use case will not work.
CRs-Fixed: 2166356
Change-Id: Ic7a93a5f20eaabed93d0cd94d76d09f0f1c869fd
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
- During PCM close, the AIF power down will be delayed if
ignore_pmdown_time flag is not set. Set this flag for ultrasound RX DAI
to avoid delay in PCM close which causes slimbus overflow.
- Flag ignore_pmdown_time is only required to be set for RX DAIs.
Add this flag for RX DAIs that don't have it and remove this
flag for TX DAIs that have it in sdm670 machine driver.
CRs-Fixed: 2166356
Change-Id: I794ee96fb96fe04091ce73f0b48f84ebf119256c
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
WCD codec must be enumerated before AFE configuration for
some of the features can be sent to DSP. This is because
as part of setting up this configuration, DSP tries to
access some codec register. These register accesses will
fail if codec is not enumerated already.
Add a check for sound card online state to confirm that WCD
codec has already enumerated before sending AFE configs.
CRs-Fixed: 2166356
Change-Id: Ie5883f3543872d7a049a00a4c70445232360f2f9
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
In analog codec, EAR PA gain control get
function is updated with input value again
resulting in override. Remove the override
of control value again.
CRs-Fixed: 2161617
Change-Id: I7ddd252adf53666a6c9adc1bc92e840067fa932c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
With AANC enabled, and when the device switches
from speaker path to handset path there is a audible
pop. Add more delay to the aanc enable work function
to resolve the pop issue.
CRs-Fixed: 2137607
Change-Id: Icaf381179b0a81440b21ab4280cb6fc95e6fe6ba
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add interface to trigger WDSP dumps for debug use.
Important register dump and WDSP ramdump are both collected when
DEBUG_DUMP string is sent from userspace via WDSP misc node or
when WDSP boot timeout happens.
CRs-Fixed: 2117755
Change-Id: I8b91a8939201a54512a5e3557ce771b4ff2ff075
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
Release the acquired mutex when there is failure
in enabling the soundwire clock.
Change-Id: I2e10ed7f0bd86524998a67d62e85754f7989eca2
Signed-off-by: Ramprasad Katkam <katkam@codeaurora.org>
High impedance aux cable when inserted causes jack to change to
lineout. This causes removal event to be called which results
in pause during music playback because jack value is not updated.
Do not change current plug while plug is marked as lineout.
CRs-Fixed: 2151012
Change-Id: I99797b58c48be00185a352094e32e8623faee491
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Check the ASM buffer index boundary before using it
to access the buffer to avoid out of array bounds error.
CRs-Fixed: 2145996
Change-Id: I5492941dfd9e7c3fa90af6caec14f9ff7e75d248
Signed-off-by: Vignesh Kulothungan <vigneshk@codeaurora.org>
For Low-latency audio playback usecase, vote for a priority
upgrade for Glink Rx thread, to avoid any performance issue.
Change-Id: I8332c80eedd7325700e695f341fc4b92f65fd77c
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Set freed pointers to NULL to avoid double free
in msm_compr_playback_open and msm_compr_playback_free
functions of the compress driver.
CRs-Fixed: 2142216
Change-Id: Ifd011dd85dd9f610c7b69dd460f73d26e006cd66
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
Add support for new ADM LSM cal types in order
to avoid topology and cal block overriding during
concurrent use cases like SVA with speaker
protection.
CRs-Fixed: 2085865
Change-Id: I155d29ff0b77b069aa5970408332064c5c2aebd7
Signed-off-by: Aditya Bavanari <abavanar@codeaurora.org>
WCD codec must be enumerated before AFE configuration for
some of the features can be sent to DSP. This is because
as part of setting up this configuration, DSP tries to
access some codec register. These register accesses will
fail if codec is not enumerated already.
Add a check for Sound Card online state to confirm that WCD
codec has already enumerated before sending AFE configs.
Change-Id: I0b7e5eb49e4f6c6aee9cb142054e57eae592602b
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
To reduce time of usb-c analog headset detection, reduce
gnd mic swap threshold if usb-c is enabled. Use
existing threshold value otherwise.
CRs-Fixed: 2137077
Change-Id: Ic1d1f3a00c9034caaac45f2c80f018546a69ce59
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Add support for LDAC encoding in dsp to
enable LDAC encoder over split a2dp path.
CRs-Fixed: 2143086
Change-Id: Ia5ed981f5cd9cc61621d667362585ec7a7e64fa1
Signed-off-by: Preetam Singh Ranawat <apranawat@codeaurora.org>
Add support of 44.1Khz, 88.2Khz and 96Khz over split-a2dp path.
CRs-Fixed: 2143086
Change-Id: I05e7e947bec250c509f647718323bd208c46b2b2
Signed-off-by: Preetam Singh Ranawat <apranawat@codeaurora.org>
Add routings between LSM FEs and Audio EC Ref, or AFE port for
external Audio EC Ref will not be enabled during DSP SVA.
Change-Id: Ic70ee9479cd384d0226ac0e92a1824f92ec2d946
Signed-off-by: Yunfei Zhang <yunfeiz@codeaurora.og>
In SSR init call stop mbhc before initializing mbhc
again, so that usbc analog deregisters the callback
with PMI notifier.
CRs-fixed: 2128532
Change-Id: I329f25172b5cc2d80b93918787f703d89c95062f
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Based on where the code is synced the driver should allow
both static and dynamic linked compilation.
Also remove __exit for modules loaded from another common
init/exit functions.
Change-Id: Ib58f152002aba3af4446f9bbd9b82c279212bd0a
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>
Add support of 44.1Khz, 88.2Khz and 96Khz over split-a2dp path.
CRs-Fixed: 2153696
Change-Id: I69f20c7a9c465c974e847f42d754c69511138fbb
Signed-off-by: Preetam Singh Ranawat <apranawat@codeaurora.org>
Disable regulator supplies of analog codec during suspend
to reduce power consumption.
CRs-Fixed: 2132296
Change-Id: Ia4b690f01e83e929f8bf4d279454e2ff2e8655a2
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Update MI2S supported sampling rates in machine driver
to match the CPU DAI driver.
Change-Id: If6145e9f18182ab4621ffcd14716039fcc1bef6f
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
File "msm-ds2-dap-config.c" has corresponding dummy functions defined
for all of its functions to avoid compilation error when config flags
"CONFIG_DOLBY_LICENSE" and "CONFIG_DOLBY_DS2" are not selected for a
target. However, this file will not get compiled when these two flags
are not selected. Therefore, those dummy functions are useless and
should be removed.
Change-Id: Ic53a6a9d87d6fd56560af1aec3dc012d6486b42a
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add support for analog mic TX hybrid mode to allow
audio catpure in high performance at the same time
achieving lower power.
CRs-Fixed: 2136385
Change-Id: I08b90a26d6b6e4761ff17dec84bf58f8d437d908
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Pop sound happens after start playback on HPH when
ultrasound playback on LO4 is enabled.
This is because CnP is sequence dependent and enabling
design blocks in specified order is causing minimum CnP.
CRs-Fixed: 2100346
Change-Id: If10f9013cc1a2aa61fe9c719d3190f2df0b00950
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Set bus_down_in_recovery flag as soon as possible when
BUS down notification reaches codec driver. This is to
avoid any unwanted slimbus transaction while BUS is still
not recovered.
Change-Id: I77917975372bf51e6aa881cbfc63c479478db375
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Reset ASRC after audio playback is completed to clear
the FIFO and avoid any noise being generated.
CRs-Fixed: 2129994
Change-Id: Ie45796e1bd68d5a8bd790490a65520358f26b811
Signed-off-by: Walter Yang <yandongy@codeaurora.org>
This reverts commit 40bc50d768038c04f8c1 ("mfd: wcd9xxx-core:
Synchronize codec down and reset calls from slimbus.").
This is to make sure that the dev_up flag is set right
after device_down is called from Slimbus after ADSP SSR.
This flag helps make sure that all read/write calls over
slimbus are blocked until ADSP and Slimbus are fully up
post-SSR.
Change-Id: I5595a23a0b51f2ca392ddfb5773b057204185b54
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Fix qos value to 300 micro seconds to prevent core
from going into low power mode when low latency
session is active. Also pin this qos to core 1
& core 2 where audio and glink threads are
running to let other cores to go to low power
modes if possible.
Change-Id: I46d356c384fd8d02a9a3b336a113200171bf25a0
Signed-off-by: Haynes Mathew George <hgeorge@codeaurora.org>
Signed-off-by: Dhananjay Kumar <dhakumar@codeaurora.org>
Signed-off-by: Aniket Kumar Lata <alata@codeaurora.org>
Clean up unused FE DAIs and remove duplicate
routings from dapm routing map for MI2S_RX_VOICE
Mixer.
CRs-Fixed: 2001153
Change-Id: I2c9bd1255331d83b1901915259fe61d287f682fc
Signed-off-by: kunleiz <kunleiz@codeaurora.org>
Excess logs are printed in msm_compr_pointer during ADSP SSR.
This causes failure of some interrupts to occur which
results in SSR failure. Logs can be reduced by applying ratelimit.
CRs-Fixed: 2128011
Change-Id: I0d3d82bf52ea307cdf719f97c4907a2d376580c1
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Pop is observed during switch from playback in native mode
to voice call and vice-versa. This is resolved by mclk
reset to non-native mode before hph path powers up.
CRs-Fixed: 2117960
Change-Id: Ic554c3b2af24dac3ae94b5a239559e5d11e98271
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
For MI2S and AUXPCM shutdown, if clock disable is failed,
do not bother to re-increment clock reference. Otherwise,
next time when startup is called, clock enable will not
be called again, so use case will not work.
Change-Id: I5ce4590d2a2030f9d00f1dba9577396f7685a87b
Signed-off-by: Banajit Goswami <bgoswami@codeaurora.org>
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Update make files to extend dlkm support for qcs605
Change-Id: Icf736fb66ca12966f4c6cd72bb906eb32899868a
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
lb_mode var is redundant for sdm660_cdc.
Loopback works fine without this var also.
CRs-Fixed: 2101423
Change-Id: I727da02660a0f1d6ee5582fc2f2c0a8f6cd59bc1
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Pop is observed after start playback on hph.
This is because both compander channels are not enabled
at the same time which differs from ideal sequence.
Amplitude of pop gets reduced after
corresponding change is made.
CRs-Fixed: 2101404
Change-Id: Iba2b8a809fd3b53f0c180ce28ac5668d7635fb24
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
If compander DRE isn't turned on, ensure analog gain mode
is set to manual mode. This also resolves low volume
at one channel.
CRs-Fixed: 2102126
Change-Id: Id29b7055fe4f7fa7b3853c26770df38d10539d8c
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Kernel panic is observed during SSR. This is because
ADSP does not get sufficient time to bring up LPASS after SSR.
An increase in ADSP Ready timeout resolves the issue.
CRs-Fixed: 2101404
Change-Id: Ia7d1ecde7a713b4d71b2a4ebb1f85a38b8fa28b5
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add a new mixer ctl to set WSA boost value for
speaker protection v3. Boost value for different
stages are packed together.
Change-Id: Ie80d7bea4d3af00b74935f8b680e72ee967717f6
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Add new mixer ctls to control max boost state level
for speaker protection V3.
Change-Id: If967de46955f6dc8692986503daea68ce105f642
Signed-off-by: Xiaojun Sang <xsang@codeaurora.org>
Update quinary mi2s dai id to 4 and secondary mi2s playback
sd1 dai id to 5. Also update index of mi2s_config_controls
for primary, secondary, tertiary and quaternary mi2s.
CRs-Fixed: 2133890
Change-Id: I00997b79a148cf50b2a3f9acf6e44fe603e5c944
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Update quinary mi2s cpu dai id to 4 for sdm670. This is
required for sending correct afe port id for quin mi2s
and keep all MI2S interfaces in sequence.
CRs-Fixed: 2133890
Change-Id: I0ab35f2d97858f355da577076a5a1e3f438a1bab
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Switch to DLKM for all audio kernel modules.
Change-Id: I6a96023a21f655f873531af9ace81f2b01eb0f58
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Compander disable sequence does not get called
after headphone playback on FM. This results
in mute at one channel. Compander clock
should be disabled at the end to resolve the mute.
CRs-Fixed: 2102126
Change-Id: Ia47fb1c393db255b52a965173a769896768f245e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Check if GPIO is valid before free to avoid crash.
Change-Id: Ie052e5ff1776ad57ae9c1d0f00873ba29e11f78f
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Deregister sound card with audio notifier when removing driver to
avoid crash.
Change-Id: I4f22fefce519e8dab25901337fdf2e62044090ed
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Remove any child devices associated with this
codec driver so that rmmod and insmod again will
run without issues.
Clear MBHC setting during tasha_remove.
Change-Id: Icad9b2ad21601525c68c5d151cd664aa6060e911
Signed-off-by: Meng Wang <mwang@codeaurora.org>
When CONFIG_SND_SOC_EXT_CODEC/CONFIG_SND_SOC_INT_CODEC is set to m not y,
"ifdef CONFIG_SND_SOC_EXT_CODEC/CONFIG_SND_SOC_INT_CODEC"
would be false which would cause init functions as dummy functions.
Change to "if IS_ENABLED" and When CONFIG_SND_SOC_EXT_CODEC/
CONFIG_SND_SOC_INT_CODEC is set to y/m, both would set the
condition to true.
Change Makefile to compile machine driver for internal/external
codec as one module.
Change-Id: Ib72f95a24e8a4e657a1e9efc655f92a397b44d32
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Enable all five TDM interfaces to configure clock frequency during
the runtime.
Change-Id: I066ea2034509dee2350205ee887dd3eeb6f5389b
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Update cpu_dai_name of quin_tdm from tdm group id to
port id for sdm670 internal and external codec machine
driver to fix soundcard registration issue.
Change-Id: I2f7ed4ea983c1d457c4d2940c33f5bb7440ddee6
Signed-off-by: Rohit kumar <rohitkr@codeaurora.org>
Add support for HDMI and DP for S24_3LE bit format.
This allows playback of 24bit audio on the external
device.
Change-Id: Ia6e1148b2e5d13cc0ff6f2372d61c83c3e704255
Signed-off-by: Ben Romberger <bromberg@codeaurora.org>
Pop noise occurs during switch from handset to speaker mode
during voice call. This is because sufficient delay
is not provided for tx to unmute. A delayed workqueue
that will do unmute at the end solves the issue.
CRs-Fixed: 2101423
Change-Id: I1ae7068b23158bb8428d5b96e9f65fb05a67ff7e
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
Add support to configure MI2S gpios from machine
driver.
Change-Id: I561fdc775c63fd7b31d41a3053956d1643bea566
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Add sclk and mclk support for quinary MI2S interfaces for
sdm660. Also, update MCLK IDs for secondary and quaternary
MI2S.
Change-Id: If6271224caffbf1623939d409e3e031d5a0c8423
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Separate compilation of analog and digital codec and add
support to compile them as dynamic module.
Change-Id: I81f01bf60aef71f67e025fa4ff1ba805a960e61d
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Change name from "TERTIARY_MI2S" to "TERT_MI2S" for RX and TX
in order to maintain consistency with other Mi2S back-ends.
CRs-Fixed: 2075701
Change-Id: I52116df27a780e42de4a6b3d74249f77d311d8d4
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
when moisture is in jack, removing of the plug result in
electrical removal interrupt. So, update electrical interrupt
handler to handle mechanical removal based on moisture status.
CRs-Fixed: 2058106
Change-Id: I9cfbfbaf04783f0edcadb14d7828759020745289
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Add support for Quinary MI2S, AuxPCM and TDM interfaces
in sdm660 machine driver.
Change-Id: I2dad713a3286499e9b76206b28a82b56638949a4
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
Add support for dais and routing for Quinary MI2S, AUXPCM and TDM
interfaces.
Change-Id: I50c3099a658998bab805c4c6a5aa447e85f3e7c6
Signed-off-by: Rohit Kumar <rohitkr@codeaurora.org>
wsa881x speaker damage has been reported due to DC at
wsa output. Add a register setting which will reset
the soundwire when there are any DC or synchronization issues.
CRs-Fixed: 2086505
Change-Id: Id2bfb876a5bace891befa613153a88ee54033d76
Signed-off-by: Vatsal Bucha <vbucha@codeaurora.org>
To config different headset detection parameters for different hardware, add
two new headset detection parameters in device tree and read it in mbhc driver.
Change-Id: I10457b7d5eae54eba8a4cd273885a63ebad3ccb3
Signed-off-by: Meng Wang <mwang@codeaurora.org>
Add support to configure a specific module and its parameter on adm
based on apptype. This can be used to dynamically configure a module
provided by application.
Change-Id: Iccfee192b0dec505bbb5f65a251e0dd12432fe59
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Add dummy static inline functions for feature QTI_PP to fix compilation
erros for undefined function when flag 'CONFIG_QTI_PP' is not defined.
Change-Id: I24c29636755f44a80b2a0267e0dbb8f72d6a3c9d
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add missing FE to BE links for Multimedia10 and Multimedia16
which can resolve FE to BE routing failures.
Change-Id: I9f889d88fe520f7efa83c2e2058995fa955c82cb
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
TDM CLK frequency needs to be updated at runtime to use the correct
CLK setup.
Change-Id: Ib42fedca3cbf41b85ca121ca04cc994bf8ad4d39
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
TDM dai driver supports optional clk attribute configuration and
clk freq update. To configure TDM interface as PCM mode, the clk
attribute should be Q6AFE_LPASS_CLK_ATTRIBUTE_INVERT_COUPLE_NO.
Implement set_sysclk callback function to update Quaternary TDM
RX and TX clk freq.
Change-Id: I41edaa8d99325e9582e04ddb81a6ad5b5e4435bc
Signed-off-by: Cong Tang <congt@codeaurora.org>
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add the corresponding 'cap_mask' to support 4 slots configuration in
CPU DAI driver to enable 4-channel QUAT TDM recording feature on SDM845.
Change-Id: I137d874b00fadde7513ab6c843f61becc74feac1
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Add support to update QUAT TDM TX HW parameters and
back end DAI link ops to enable QUAT TDM recording
feature on SDM845.
Change-Id: If0fccafaf563f9453559a45a59300a5bec75f449
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
When there's a dynamic channel change from mono to stereo,
volume burst is observed because center channel gain for
stereo is not initialized. Initialize center channel gain
for both mono and stereo playback.
CRs-Fixed: 2095081
Change-Id: I02254b5696a17e2792ea26a2265ab01326f5cf9e
Signed-off-by: Yidong Huang <yidongh@codeaurora.org>
Add missing FE to BE link for Multimedia10.
Change-Id: Ibf9a80c942107b1f68b5954b21f87d4f7494b1fc
Signed-off-by: Vikram Panduranga <vpandura@codeaurora.org>
Variable 'status' is used without initialization.
Initialize it to the right value.
Change-Id: I7f43d8905d8192e5f308e9fd00a52eb531f2f698
Signed-off-by: Xiaoyu Ye <benyxy@codeaurora.org>
Remove MCLK_CONTROL and FS_CNT_CONTROL from
the list of volatile registers so that regmap
sync happens for these registers when coming
out of power collapse. These clock registers
need to be synced otherwise codec state is not
restored correctly after power collapse.
CRs-fixed: 2053506
Change-Id: I9b5385a357f9ad05ad085603410704e916e3985e
Signed-off-by: Karthikeyan Mani <kmani@codeaurora.org>
Propagate the changes based on latest snapshot
for audio kernel source tree at below cutoff of
kernel msm-4.9 -
(040750bfa78 -
"Revert "ARM: dts: msm: Add DT node for aop-qmp
clock controller on SDM845 v2"")
CRs-Fixed: 2104096
Change-Id: I0927c40b3a188dbf892e7ec4c1c7810953724929
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
The previous commit fb24ad8485a assigns obj-y with
msm_hdmi_codec_rx.o instead of appending, thus giving
compilation error as previously assigned object files
are removed.
Fix by appending obj-y with msm_hdmi_codec_rx.o instead
of assigning.
Change-Id: I7c5ea5627e2e1888e3fc0b53a6650ab64b9a29a8
Signed-off-by: Shiv Maliyappanahalli <smaliyap@codeaurora.org>
HDMI codec driver is not compiling as the corresponding object
file is not set in the makefile.
Add object file to SND_SOC_MSM_HDMI_CODEC_RX config.
Change-Id: I6068f551db357e5bfa73ff5b51014347f38b925c
Signed-off-by: Shiv Maliyappanahalli <smaliyap@codeaurora.org>
Propagate the changes based on latest snapshot
for audio kernel source tree at below cutoff of
kernel msm-4.9 -
(aed56b2df75 - "drm/msm/sde: update te vsync enable sequence change")
Change-Id: I7ed5102146986b81e5cb9ca55432360b3549b60c
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
Enable compilation for sdm670 audio. Update
for both internal and external codecs.
Change-Id: I030837a2c0180a5a31d0ab786ad5de607027050f
Signed-off-by: Laxminath Kasam <lkasam@codeaurora.org>
(1996ec83a45: "ARM: dts: msm: Reduce CNOC bus voting for
USB slave on SDM845")
This change is to migrate latest snapshot of kernel drivers.
Change-Id: I84669db544773d3ce9d2d5dff0ab6943bd7d8ff9
Signed-off-by: Asish Bhattacharya <asishb@codeaurora.org>