Commit Graph

233 Commits

Author SHA1 Message Date
Michael Chan
52c0fd834e [TG3]: Add TSO workaround using GSO
Use GSO to workaround a rare TSO bug on some chips.  This hardware
bug may be triggered when the TSO header size is greater than 80
bytes.  When this condition is detected in a TSO packet, the driver
will use GSO to segment the packet to workaround the hardware bug.

Thanks to Juergen Kreileder <jk@blackdown.de> for reporting the
problem and collecting traces to help debug the problem.

And thanks to Herbert Xu <herbert@gondor.apana.org.au> for providing
the GSO mechanism that happens to be the perfect workaround for this
problem.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:11:57 -07:00
Michael Chan
1661394e78 [TG3]: Turn on hw fix for ASF problems
Clear a bit to enable a hardware fix for some ASF related problem.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:11:55 -07:00
Michael Chan
f92905deb9 [TG3]: Add rx BD workaround
Add workaround to limit the burst size of rx BDs being DMA'ed to the
chip.  This works around hardware errata on a number of 5750, 5752,
and 5755 chips.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:11:52 -07:00
Michael Chan
29315e8770 [TG3]: Add tg3_netif_stop() in vlan functions
Add tg3_netif_stop() when changing the vlgrp (vlan group) pointer. It
is necessary to quiesce the device before changing that pointer.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-30 14:11:50 -07:00
Jörn Engel
6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00
David S. Miller
de8d28b16f [SPARC64]: Convert sparc64 PCI layer to in-kernel device tree.
One thing this change pointed out was that we really should
pull the "get 'local-mac-address' property" logic into a helper
function all the network drivers can call.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 23:15:26 -07:00
Herbert Xu
7967168cef [NET]: Merge TSO/UFO fields in sk_buff
Having separate fields in sk_buff for TSO/UFO (tso_size/ufo_size) is not
going to scale if we add any more segmentation methods (e.g., DCCP).  So
let's merge them.

They were used to tell the protocol of a packet.  This function has been
subsumed by the new gso_type field.  This is essentially a set of netdev
feature bits (shifted by 16 bits) that are required to process a specific
skb.  As such it's easy to tell whether a given device can process a GSO
skb: you just have to and the gso_type field and the netdev's features
field.

I've made gso_type a conjunction.  The idea is that you have a base type
(e.g., SKB_GSO_TCPV4) that can be modified further to support new features.
For example, if we add a hardware TSO type that supports ECN, they would
declare NETIF_F_TSO | NETIF_F_TSO_ECN.  All TSO packets with CWR set would
have a gso_type of SKB_GSO_TCPV4 | SKB_GSO_TCPV4_ECN while all other TSO
packets would be SKB_GSO_TCPV4.  This means that only the CWR packets need
to be emulated in software.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-23 02:07:29 -07:00
Michael Chan
00b7050426 [TG3]: Convert to non-LLTX
Herbert Xu pointed out that it is unsafe to call netif_tx_disable()
from LLTX drivers because it uses dev->xmit_lock to synchronize
whereas LLTX drivers use private locks.

Convert tg3 to non-LLTX to fix this issue. tg3 is a lockless driver
where hard_start_xmit and tx completion handling can run concurrently
under normal conditions. A tx_lock is only needed to prevent
netif_stop_queue and netif_wake_queue race condtions when the queue
is full.

So whether we use LLTX or non-LLTX, it makes practically no
difference.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:58:45 -07:00
Michael Chan
c71302d61f [TG3]: Remove unnecessary tx_lock
Remove tx_lock where it is unnecessary. tg3 runs lockless and so it
requires interrupts to be disabled and sync'ed, netif_queue and NAPI
poll to be stopped before the device can be reconfigured. After
stopping everything, it is no longer necessary to get the tx_lock.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:55:55 -07:00
Michael Chan
9cb3528cdb [TG3]: update version and reldate
Update version to 3.60.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:28:28 -07:00
Michael Chan
df3e654818 [TG3]: Add recovery logic when MMIOs are re-ordered
Add recovery logic when we suspect that the system is re-ordering
MMIOs. Re-ordered MMIOs to the send mailbox can cause bogus tx
completions and hit BUG_ON() in the tx completion path.

tg3 already has logic to handle re-ordered MMIOs by flushing the MMIOs
that must be strictly ordered (such as the send mailbox).  Determining
when to enable the flush is currently a manual process of adding known
chipsets to a list.

The new code replaces the BUG_ON() in the tx completion path with the
call to tg3_tx_recover(). It will set the TG3_FLAG_MBOX_WRITE_REORDER
flag and reset the chip later in the workqueue to recover and start
flushing MMIOs to the mailbox.

A message to report the problem will be printed. We will then decide
whether or not to add the host bridge to the list of chipsets that do
re-ordering.

We may add some additional code later to print the host bridge's ID so
that the user can report it more easily.

The assumption that re-ordering can only happen on x86 systems is also
removed.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:26:26 -07:00
Michael Chan
30b6c28d2a [TG3]: Add 5786 PCI ID
Add PCI ID for BCM5786 which is a variant of 5787.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-17 21:26:24 -07:00
David S. Miller
f49639e643 [TG3]: Handle Sun onboard tg3 chips more correctly.
Get rid of all the SUN_570X logic and instead:

1) Make sure MEMARB_ENABLE is set when we probe the SRAM
   for config information.  If that is off we will get
   timeouts.

2) Always try to sync with the firmware, if there is no
   firmware running do not treat it as an error and instead
   just report it the first time we notice this condition.

3) If there is no valid SRAM signature, assume the device
   is onboard by setting TG3_FLAG_EEPROM_WRITE_PROT.

Update driver version and release date.

With help from Michael Chan and Fabio Massimo Di Nitto.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-09 12:03:51 -07:00
Michael Chan
463d305bc5 [TG3]: Add some missing rx error counters
Add some missing rx error counters for 5705 and newer chips.

Update version to 3.58.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-22 16:36:27 -07:00
Karsten Keil
ef34814426 [TG3]: ethtool always report port is TP.
Even with fiber cards ethtool reports that the connected port is TP,
the patch fix this.

Signed-off-by: Karsten Keil <kkeil@suse.de>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-12 12:49:08 -07:00
Jesper Juhl
a50bb7b9af [TG3]: Fix possible NULL deref in tg3_run_loopback().
tg3_run_loopback doesn't check that dev_alloc_skb() returns anything
useful.

Even if dev_alloc_skb() fails to return an skb to us we'll happily go
on and assume it did, so we risk dereferencing a NULL pointer.  Much
better to fail gracefully by returning -ENOMEM than crashing here.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-09 23:14:35 -07:00
Michael Chan
b276764091 [TG3]: Update version and reldate
Update version to 3.57.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 19:01:06 -07:00
Michael Chan
f6d9a2565b [TG3]: Fix bug in nvram write
Fix bug in nvram write function. If the starting nvram address offset
happens to be the last dword of the page, the NVRAM_CMD_LAST bit will
not get set in the existing code. This patch fixes the bug by changing
the "else if" to "if" so that the last dword condition always gets
checked.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 19:00:24 -07:00
Gary Zambrano
8e7a22e3eb [TG3]: Add reset_phy parameter to chip reset functions
Add a reset_phy parameter to tg3_reset_hw() and tg3_init_hw(). With
the full chip reset during MAC address change, the automatic PHY reset
during chip reset will cause a link down and bonding will not work
properly as a result. With this reset_phy parameter, we can do a chip
reset without link down when changing MAC address or MTU.

Signed-off-by: Gary Zambrano <zambrano@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 18:59:13 -07:00
Michael Chan
58712ef9f2 [TG3]: Reset chip when changing MAC address
Do the full chip reset when changing MAC address if ASF is enabled.

ASF sometimes uses a different MAC address than the driver. Without
the reset, the ASF MAC address may be overwritten when the driver's
MAC address is changed.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 18:58:01 -07:00
Michael Chan
c424cb249d [TG3]: Add phy workaround
Add some PHY workaround code to reduce jitter on some PHYs.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 18:56:34 -07:00
Michael Chan
c8e1e82b6a [TG3]: Call netif_carrier_off() during phy reset
Add netif_carrier_off() call during tg3_phy_reset(). This is needed
to properly track the netif_carrier state in cases where we do a
PHY reset with interrupts disabled. The SerDes code will not run
properly if the netif_carrier state is wrong.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-29 18:55:17 -07:00
Michael Chan
bbadf503d7 [TG3]: Speed up SRAM access (2nd version)
Speed up SRAM read and write functions if possible by using MMIO
instead of config. cycles. With this change, the post reset signature
done at the end of D3 power change must now be moved before the D3
power change.

IBM reported a problem on powerpc blades during ethtool self test that
was caused by the memory test taking excessively long. Config.  cycles
are very slow on powerpc and the memory test can take more than 10
seconds to complete using config. cycles.

David Miller informed me that an earlier version of the patch caused
problems on sparc64 systems with built-in tg3 chips. This version
fixes the problem by excluding all SUN built-in tg3 chips from doing
MMIO SRAM access.

TG3_FLAG_EEPROM_WRITE_PROT is also set unconditionally when
TG3_FLG2_SUN_570X is set. This should be sane as all SUN chips are
built-in and do not require Vaux switching.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09 22:25:46 -07:00
Michael Chan
d2d746f83b [TG3]: Kill some less useful flags
Kill the TG3_FLAG_NO_{TX|RX}_PSEUDO_CSUM flags because they are not
very useful. This will free up some bits for new flags.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09 22:25:44 -07:00
Adrian Bunk
ad96b485b4 [TG3]: Fix a memory leak.
This patch fixes a memory leak (buf wasn't freed) spotted by the
Coverity checker.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-09 22:25:27 -07:00
Linus Torvalds
63589ed078 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (48 commits)
  Documentation: fix minor kernel-doc warnings
  BUG_ON() Conversion in drivers/net/
  BUG_ON() Conversion in drivers/s390/net/lcs.c
  BUG_ON() Conversion in mm/slab.c
  BUG_ON() Conversion in mm/highmem.c
  BUG_ON() Conversion in kernel/signal.c
  BUG_ON() Conversion in kernel/signal.c
  BUG_ON() Conversion in kernel/ptrace.c
  BUG_ON() Conversion in ipc/shm.c
  BUG_ON() Conversion in fs/freevxfs/
  BUG_ON() Conversion in fs/udf/
  BUG_ON() Conversion in fs/sysv/
  BUG_ON() Conversion in fs/inode.c
  BUG_ON() Conversion in fs/fcntl.c
  BUG_ON() Conversion in fs/dquot.c
  BUG_ON() Conversion in md/raid10.c
  BUG_ON() Conversion in md/raid6main.c
  BUG_ON() Conversion in md/raid5.c
  Fix minor documentation typo
  BFP->BPF in Documentation/networking/tuntap.txt
  ...
2006-04-02 12:58:45 -07:00
Eric Sesterhenn
5d9428de1a BUG_ON() Conversion in drivers/net/
this changes if() BUG(); constructs to BUG_ON() which is
cleaner, contains unlikely() and can better optimized away.

Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-02 13:52:48 +02:00
David S. Miller
5c516c1019 [TG3]: Update driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 00:33:31 -08:00
David S. Miller
758a613936 [TG3]: Revert "Speed up SRAM access"
Undo commit 100c467330

MMIOs timeout more quickly that PCI config cycles and some
of these SRAM accesses can take a very long time, triggering
the MMIO limits on some sparc64 PCI controllers and thus
resulting in bus timeouts and bus errors.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-04-01 00:32:56 -08:00
Michael Chan
e3a05978f1 [TG3]: Update version and reldate
Update version to 3.55.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:41 -08:00
Michael Chan
f475f163f1 [TG3]: Skip timer code during full lock
Skip the main timer code if interrupts are disabled in the full lock
state.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:39 -08:00
Michael Chan
100c467330 [TG3]: Speed up SRAM access
Speed up SRAM read and write functions if possible by using MMIO
instead of config. cycles. With this change, the post reset signature
done at the end of D3 power change must now be moved before the D3
power change.

IBM reported a problem on powerpc blades during ethtool self test
that was caused by the memory test taking excessively long. Config.
cycles are very slow on powerpc and the memory test can take more
than 10 seconds to complete using config. cycles. As a result, NETDEV
WATCHDOG can be triggered during self test and the chip can end up in
a funny state.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:38 -08:00
Michael Chan
ff18ff0234 [TG3]: Fix PHY loopback on 5700
Fix PHY loopback failure on some 5700 devices.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:37 -08:00
Michael Chan
6728a8e2e1 [TG3]: Fix bug in 40-bit DMA workaround code
Need to check the TG3_FLAG_40BIT_DMA_BUG flag in the workaround code
path instead of device flags.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:36 -08:00
Michael Chan
008652b337 [TG3]: Fix probe failure due to invalid MAC address
Some older bootcode in some devices may report 0 MAC address in
SRAM when booting up from low power state. This patch fixes the
problem by checking for a valid MAC address in SRAM and falling back
to NVRAM if necessary.

Thanks to walt <wa1ter@myrealbox.com> for reporting the problem
and helping to debug it.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-28 17:02:35 -08:00
David S. Miller
95381c893d [TG3]: Update driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23 01:29:06 -08:00
Michael Chan
d3c7b88697 [TG3]: Add 5755 nvram support
Add 5755 nvram support.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23 01:28:25 -08:00
Michael Chan
af36e6b6d7 [TG3]: Add 5755 support
Add support for new chip 5755 which is very similar to 5787.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-23 01:28:06 -08:00
David S. Miller
056755f4d7 [TG3]: Bump driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 01:07:53 -08:00
Michael Chan
15c3b69610 [TG3]: Skip phy power down on some devices
Some PHYs should not be powered down in tg3_set_power_state() because
of bugs or other hardware limitations.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 01:06:52 -08:00
Michael Chan
caf636c760 [TG3]: Fix SRAM access during tg3_init_one()
5700 and 5701 will not return correct SRAM data when the chip is in
D3hot power state. tg3_get_eeprom_hw_cfg() must first put the device
in D0 before reading SRAM.

Thanks to Thomas Chenault at Dell for noticing this problem.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-22 01:05:31 -08:00
David S. Miller
30ca3e376e [TG3]: Don't mark tg3_test_registers() as returning const.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 23:02:36 -08:00
Adrian Bunk
81789ef5c9 [TG3]: make drivers/net/tg3.c:tg3_request_irq() static
This patch makes the needlessly global function tg3_request_irq()
static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 23:00:14 -08:00
Jeff Mahoney
59f1741e54 [TG3]: netif_carrier_off runs too early; could still be queued when init fails
Move the netif_carrier_off() call from tg3_init_one()->
tg3_init_link_config() to tg3_open() as is the convention for most other
network drivers.

I was getting a panic after a tg3 device failed to initialize due to DMA
failure.  The oops pointed to the link watch queue with spinlock debugging
enabled.  Without spinlock debugging, the Oops didn't occur.

I suspect that the link event was getting queued but not executed until
after the DMA test had failed and the device was freed.  The link event was
then operating on freed memory, which could contain anything.  With this
patch applied, the Oops no longer occurs.

[ Based upon feedback from Michael Chan, we move netif_carrier_off()
  to the end of tg3_init_one() instead of moving it to tg3_open() -DaveM ]

Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:39:21 -08:00
Michael Chan
e9e678006e [TG3]: update version and reldate
Update version to 3.52.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:29:52 -08:00
Michael Chan
c4e6575c78 [TG3]: Add firmware version info
Add fw_version information to ethtool -i.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:29:32 -08:00
Michael Chan
1820180b0e [TG3]: nvram cleanup
Some nvram related cleanup:

1. Add a tg3_nvram_read_swab() since swabing the data is frequently
done.

2. Add a function to convert nvram address to physical address
instead of doing it in 2 separate places.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:29:15 -08:00
Michael Chan
79f4d13a15 [TG3]: Fixup memory test for 5787
Ethtool memory test on 5787 requires a new memory table.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:28:57 -08:00
Michael Chan
fcfa0a32c7 [TG3]: Add new one-shot MSI handler
Support one-shot MSI on 5787.

This one-shot MSI idea is credited to David Miller. In this mode, MSI
disables itself automatically after it is generated, saving the driver
a register access to disable it for NAPI.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:28:41 -08:00
Michael Chan
9c27dbdf64 [TG3]: Add ipv6 checksum support
Support ipv6 tx csum on 5787 by setting NETIF_F_HW_CSUM.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:28:27 -08:00
Michael Chan
5a6f3074c2 [TG3]: Add new hard_start_xmit
Support 5787 hardware TSO using a new flag TG3_FLG2_HW_TSO_2.

Since the TSO interface is slightly different and these chips have
finally fixed the 4GB DMA problem and do not have the 40-bit DMA
problem, a new hard_start_xmit is used for these chips. All previous
chips will use the old hard_start_xmit that is now renamed
tg3_start_xmit_dma_bug().

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:28:05 -08:00
Michael Chan
1b27777a9b [TG3]: Add 5787 nvram support
Support additional nvrams and new nvram format for 5787 and 5754.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:27:48 -08:00
Michael Chan
d9ab5ad12b [TG3]: Add 5787 and 5754 basic support
Add basic support for 2 new chips 5787 and 5754.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 22:27:35 -08:00
Michael Chan
4f81c32b02 [TG3]: Fix tg3_get_ringparam()
Fix-up tg3_get_ringparam() to return the correct parameters.

Set the jumbo rx ring parameter only if it is supported by the chip
and currently in use.

Add missing value for tx_max_pending, noticed by Rick Jones.

Update version to 3.51.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 21:33:42 -08:00
Michael Chan
e75f7c9009 [TG3]: Add some missing netif_running() checks
Add missing netif_running() checks in tg3's dev->set_multicast_list()
and dev->set_mac_address(). If not netif_running(), these 2 calls can
simply return 0 after storing the new settings if required.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 21:33:26 -08:00
Michael Chan
2e2e4f5c99 [TG3]: Update version and reldate
Update version to 3.50.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 17:48:18 -08:00
Michael Chan
bc1c756741 [TG3]: Support shutdown WoL.
Support WoL during shutdown by calling
tg3_set_power_state(tp, PCI_D3hot) during tg3_close().

Change the power state parameter to pci_power_t type and use
constants defined in pci.h.

Certain ethtool operations cannot be performed after tg3_close()
because the device will go to low power state. Add return -EAGAIN
in such cases where appropriate.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 17:48:03 -08:00
Michael Chan
4e3a7aaa28 [TG3]: Enable TSO by default
Enable TSO by default on newer chips that support TSO in hardware.
Leave TSO off by default on older chips that do firmware TSO because
performance is slightly lower.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 17:47:44 -08:00
Michael Chan
d4d2c558fd [TG3]: Add support for 5714S and 5715S
Add support for 5714S and 5715S.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 17:47:20 -08:00
Linus Torvalds
c4a1745aa0 Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (230 commits)
  [SPARC64]: Update defconfig.
  [SPARC64]: Fix 2 bugs in huge page support.
  [SPARC64]: CONFIG_BLK_DEV_RAM fix
  [SPARC64]: Optimized TSB table initialization.
  [SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build.
  [SPARC64]: Use SLAB caches for TSB tables.
  [SPARC64]: Don't kill the page allocator when growing a TSB.
  [SPARC64]: Randomize mm->mmap_base when PF_RANDOMIZE is set.
  [SPARC64]: Increase top of 32-bit process stack.
  [SPARC64]: Top-down address space allocation for 32-bit tasks.
  [SPARC64] bbc_i2c: Fix cpu check and add missing module license.
  [SPARC64]: Fix and re-enable dynamic TSB sizing.
  [SUNSU]: Fix missing spinlock initialization.
  [TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts.
  [SPARC64]: First cut at VIS simulator for Niagara.
  [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check.
  [SPARC64]: Add SMT scheduling support for Niagara.
  [SPARC64]: Fix 32-bit truncation which broke sparsemem.
  [SPARC64]: Move over to sparsemem.
  [SPARC64]: Fix new context version SMP handling.
  ...
2006-03-20 11:57:50 -08:00
Jeff Garzik
d378aca6ec Merge branch 'master' 2006-03-20 04:38:03 -05:00
David S. Miller
72b845e04e [TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts.
Sun does't put an SEEPROM behind the tigon3 chip, among other things,
so accesses to these areas just give bus timeouts.

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20 01:14:27 -08:00
Michael Chan
4a29cc2e50 [TG3]: 40-bit DMA workaround part 2
The 40-bit DMA workaround recently implemented for 5714, 5715, and
5780 needs to be expanded because there may be other tg3 devices
behind the EPB Express to PCIX bridge in the 5780 class device.

For example, some 4-port card or mother board designs have 5704 behind
the 5714.

All devices behind the EPB require the 40-bit DMA workaround.

Thanks to Chris Elmquist again for reporting the problem and testing
the patch.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-19 13:21:12 -08:00
Jeff Garzik
abc71c46dc Merge branch 'upstream-fixes' 2006-03-16 19:27:08 -05:00
Adrian Bunk
0ade309be7 [TG3] tg3_bus_string(): remove dead code
The Coverity checker spotted this dead code (note that (clock_ctrl == 7) 
is already handled above).

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-11 18:49:38 -08:00
Jeff Garzik
749dfc7055 Merge branch 'upstream-fixes' 2006-03-11 13:35:31 -05:00
Michael Chan
72f2afb8a6 [TG3]: Add DMA address workaround
Add DMA workaround for chips that do not support full 64-bit DMA
addresses.

5714, 5715, and 5780 chips only support DMA addresses less than 40
bits. On 64-bit systems with IOMMU, set the dma_mask to 40-bit so
that pci_map_xxx() calls will map the DMA address below 40 bits if
necessary. On 64-bit systems without IOMMU, set the dma_mask to
64-bit and check for DMA addresses exceeding the limit in
tg3_start_xmit().

5788 only supports 32-bit DMA so need to set the mask appropriately
also.

Thanks to Chris Elmquist at SGI for reporting and helping to debug
the problem on 5714.

Thanks to David Miller for explaining the HIGHMEM and DMA stuff.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-06 19:28:35 -08:00
Arjan van de Ven
f71e130966 Massive net driver const-ification. 2006-03-03 21:33:57 -05:00
David S. Miller
051d3cbd96 [TG3]: Fix Sun tg3 variant detection.
Some Sun parts don't have PCI_VENDOR_ID_SUN in the subsystem
vendor ID.  So add another fallback test, which is the name
of the OBP firmware device tree node.  If it's a Sun part we'll
get "network", else it will be named "ethernet".

Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-27 12:51:27 -08:00
David S. Miller
6e2be3ea4f [TG3]: Update driver version and release date.
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 17:29:59 -08:00
Michael Chan
7faa006f94 [TG3]: Flush tg3_reset_task()
Make sure tg3_reset_task() is flushed in the close and suspend paths
as noted by Jeff Garzik.

In the close path, calling flush_scheduled_work() may cause deadlock
if linkwatch_event() is on the workqueue. linkwatch_event() will try
to get the rtnl_lock() which is already held by tg3_close(). So
instead, we set a flag in tg3_reset_task() and tg3_close() polls
the flag until it is cleared.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-02 17:29:28 -08:00
Michael Chan
ec41c7dfd5 [TG3]: Refine nvram locking
Add nvram lock count so that calls to tg3_nvram_lock()/unlock() can
be nested. Add error checking to all callers of tg3_nvram_lock()
where appropriate. To prevent nvram lock failures after halting the
firmware, it is also necessary to release firmware's nvram lock in
tg3_halt_cpu().

Update version to 3.48.

Based on David Miller's initial patch.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-17 02:40:55 -08:00
Alexey Dobriyan
fd30333d0f [TG3]: fixup tot_len calculation
Turning struct iphdr::tot_len into __be16 added sparse warning.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 14:19:25 -08:00
Arnaldo Carvalho de Melo
14c850212e [INET_SOCK]: Move struct inet_sock & helper functions to net/inet_sock.h
To help in reducing the number of include dependencies, several files were
touched as they were getting needed headers indirectly for stuff they use.

Thanks also to Alan Menegotto for pointing out that net/dccp/proto.c had
linux/dccp.h include twice.

Signed-off-by: Arnaldo Carvalho de Melo <acme@mandriva.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2006-01-03 13:11:21 -08:00
David S. Miller
a8b554e75b [TG3]: Update driver version and reldate.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-28 13:05:41 -08:00
Chris Elmquist
091465d751 [TG3]: ethtool -d hangs PCIe systems
Resubmitting after recommendation to use GET_REG32_1() instead of
GET_REG32_LOOP(..., 1).  Retested.  Problem remains fixed.

Prevent tg3_get_regs() from reading reserved and undocumented registers
at RX_CPU_BASE and TX_CPU_BASE offsets which caused hostile behavior
on PCIe platforms.

Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-28 13:04:52 -08:00
Michael Chan
38690194bc [TG3]: Fix ethtool memory test
Skip the memory 0xb50 to 0x1000 during "ethtool -t" memory test.
Overwriting memory in this region can cause ASF problems.

Update version and release date.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 16:27:28 -08:00
Michael Chan
b401e9e2ec [TG3]: Add tw32_wait_f() for some sensitive registers
The tw32_f() function (register write with immediate read flush) can
hang when used on some registers to switch clock frequencies and
power. A new tw32_wait_f() is added for such registers with the
delay before the read and after the read.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 16:27:04 -08:00
Michael Chan
dc56b7d46d [TG3]: Some low power fixes
Add some missing workarounds in tg3_set_power_state():

1. Workaround to prevent overdrawing current on 5714.

2. Do not power down 5700's PHY because of hw limitation.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 16:26:28 -08:00
Michael Chan
8c2dc7e1e7 [TG3]: Fix peer device handling
Locate the pdev_peer for dual port 5714 NIC devices in addition to
5704 devices. The name is also changed to tg3_find_peer() from
tg3_find_5704_peer(). It is also necessary to call netdev_priv() to
get to the peer's private tg3 structure.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19 16:26:02 -08:00
Michael Chan
6921d201f7 [TG3]: Fix low power state
Fix the following bugs in tg3_set_power_state():

1. Both WOL and ASF flags require switching to aux power.

2. Add a missing handshake with firmware to enable WOL.

3. Turn off the PHY if both WOL and ASF are disabled.

4. Add nvram arbitration before halting the firmware.

5. Fix tg3_setup_copper_phy() to switch to 100Mbps when
   changing to low power state.

Update revision and date.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13 21:15:53 -08:00
Michael Chan
16fe9d74f1 [TG3]: Fix 5704 single-port mode
If the dual-port 5704 is configured as a single-port device with
only one PCI function, it would trigger a BUG() condition in
tg3_find_5704_peer(). This fixes the problem by returning its
own pdev if the peer cannot be found.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13 21:09:54 -08:00
Michael Chan
6a9eba15f5 [TG3]: Fix suspend and resume
Fix tg3_suspend() and tg3_resume() by clearing and setting the
TG3_FLAG_INIT_COMPLETE flag when appropriate. tg3_set_power_state()
looks at TG3_FLAG_INIT_COMPLETE on the peer device to determine
when to appropriately switch to aux power.  

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13 21:08:58 -08:00
Michael Chan
381291b7d3 [TG3]: Fix nvram arbitration bugs.
The nvram arbitration rules were not strictly followed in a few places
and this could lead to reading corrupted values from the nvram.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13 21:08:21 -08:00
Stephen Hemminger
1f064a87c8 [TG3]: remove warning on race
[ Move assosciated code comment to the correct spot, and
  update driver version and release date -DaveM ]

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-06 17:36:44 -08:00
Tobias Klauser
f9a5f7d3f3 [PATCH] drivers/net/tg3: Use the DMA_{32,64}BIT_MASK constants
This one from my DMA_{32,64}BIT_MASK series did not seem to make it
through to upstream.

Use the DMA_{32,64}BIT_MASK constants from dma-mapping.h when calling
pci_set_dma_mask() or pci_set_consistent_dma_mask()
This patch includes dma-mapping.h explicitly because it caused errors
on some architectures otherwise.
See http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for details

Signed-off-by: Tobias Klauser <tklauser@nuerscht.ch>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-29 14:15:37 -04:00
Jesper Juhl
b4558ea93d drivers/net: Remove pointless checks for NULL prior to calling kfree() 2005-10-28 16:53:13 -04:00
Michael Chan
37ff238d68 [PATCH] tg3: update version and minor fixes
Update version and reldate and add more sanity checking to
tg3_set_settings().

Signed-off-by: Gary Zambrano <zambrano@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-28 16:07:30 -04:00
Michael Chan
28fbef78a4 [PATCH] tg3: fix ASF heartbeat
Change the ASF heart beat to 5 seconds for faster detection of system
crash. The driver sends the heartbeat every 2 seconds and the ASF
firmware will timeout and reset the device if no heartbeat is received
after 5 seconds. The old scheme of 2 minutes is ineffective.

tg3_write_mem_fast() is added to speed up the IO to send the heartbeat.
When no workaround is needed, it will use direct MMIO to memory space
to write to memory.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-28 16:07:30 -04:00
Michael Chan
a4e2b34784 [PATCH] tg3: add 5714/5715 support
Add complete support for 5714/5715. These chips are very similar to
5780 so the changes are very trivial. A TG3_FLG2_5780_CLASS flag is
added to identify these chips.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-28 16:07:29 -04:00
David S. Miller
ed39f731ab [TG3]: Update driver version and release date.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 16:25:23 -07:00
Michael Chan
399de50bbb [TG3]: Refine AMD K8 write-reorder chipset test.
Test for VIA K8T800 north bridge instead of AMD K8 HyperTransport
bridge based on new information from Andi Kleen. The AMD
HyperTransport interface is not responsible for PCI transactions
and so the re-ordering is more likely done by the VIA north bridge.
This code is subject to change if we get more information from AMD
or VIA.

PCI Express devices are excluded from doing the read flush since all
chipsets in the write_reorder list are PCI chipsets.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03 14:02:39 -07:00
David S. Miller
c8a6c29639 [TG3]: Update driver version and release date.
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 12:13:38 -07:00
Michael Chan
f9804ddbee [TG3]: misc. fixes
Fix interrupt test handler by adding check for IRQ assertion in
PCI_STATE register in addition to the status block updated bit.

Add test for valid ethernet address in tg3_set_mac_addr().

Add tg3_bus_string() to setup the PCI bus speed/width string for all
PCI/PCIX/PCI Express devices. This is used to print the bus type
during init_one().

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 12:13:10 -07:00
Michael Chan
c94e39418a [TG3]: 5780 PHY fixes
Fix 5780 PHY related problems:

1. MAC_RX_MODE reset must be done before setting up the MAC_MODE
   register on 5705_PLUS chips or the chip will stop receiving after
   a while. The MAC_RX_MODE reset is needed to prevent intermittently
   losing the first receive packet on serdes chips.

2. Skip MAC loopback test on 5780 because of hardware errata. Normal
   traffic including PHY loopback is not affected by the errata.

3. PHY loopback fails intermittently on 5708S and this is fixed by
   putting the PHY in loopback mode first before programming the MAC
   mode register. A MAC_RX_MODE reset is also added.

4. Return -EINVAL in tg3_nway_reset() if device is in TBI mode. Allow
   nway_reset if 5780S is in parallel detect mode.

5. Add missing PHY IDs in KNOWN_PHY_ID() macro.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-27 12:12:42 -07:00
Michael Chan
c58ec93245 [TG3]: Fix 4GB boundary tx handling
Fix and simplify the workaround code for the 4GB boundary tx buffer
hardware bug.

1. Need to unmap the original SKB's dma addresses if a new SKB cannot
   be allocated.

2. Need to pass the base flag to tigon3_4gb_hwbug_workaround() or TSO
   won't work properly.

3. The guilty entry and length parameters for
   tigon3_4gb_hwbug_workaround() are removed as they are not necessary.

4. Remove assumption that only one fragment can hit the 4GB boundary.
   Another fragment can hit 8GB for example.

Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-17 00:46:27 -07:00
Peter Hagervall
22abe310bc [TG3]: Sparse fixes for tg3
Change 0 to NULL where appropriate.

Signed-off-by: Peter Hagervall <hager@cs.umu.se>
Acked-by: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-16 17:01:03 -07:00
David S. Miller
1cbf07478b [TG3]: Add AMD K8 to list of write-reorder chipsets.
Thanks to Andy Stewart for the report and testing
debug patches from Michael Chan.

Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-16 16:59:20 -07:00
John W. Linville
2ff436977e [TG3]: Add support for ETHTOOL_GPERMADDR.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12 14:44:20 -07:00
John W. Linville
4f63b87772 [TG3]: Do not count non-error frames dropped by the hardware as rx_errors.
Instead, count them as part of rx_missed_errors.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-09-12 14:43:18 -07:00