Introduce a new parameter in the ini file for the maximum
number of MSDUs per HTT_RX_INORDERIND message.
This parameter is now sent over to the FW through the RFS
configuration message.
Change-Id: Id0057861bc172a36483804170274b202198b6824
CRs-Fixed: 2106760
This reverts commit I3216a4c14ac624cc313d11226909efd4f63841d0
When alloccate free Tx desc list, Tx desc pool size is not initialized yet,
so tx_desc_size is set to 0.
This cause free Tx descriptor allocation failed.
Change-Id: I02ae2e59311e737dd9245228048d62f657d5b0d1
CRs-Fixed: 2085753
This change adds support for configuring voltage corner mode
thorugh INI parameter. User will provide a bitmap which will
be passed on to the FW during initialization. In this bitmap,
each pair of bits till BIT27 correspond to different phymode,
bw combination. Bit values signify voltage corner configuration.
Change-Id: I9e86d43079225b6f08fdd281c8f424b18abcffe9
CRs-Fixed: 2109884
The hdd_hostapd_state bCommit flag is a remnant from a prior version
of the driver. This flag is written, but never read, and hence
obviously has no purpose, so remove it.
Change-Id: If4fd93f474fcd6e01cdc51b1575a3509b538b504
CRs-Fixed: 2126889
Checkpatch reported the following issue, so fix it:
- ERROR:SPACING: space prohibited after that '*' (ctx:ExW)
Change-Id: I78a48d284d8b773a4a8c02f2196200f615836690
CRs-Fixed: 2126450
PMO resume timeout is 25 seconds which is too large
hence reduce PMO resume timeout to 6 seconds.
Change-Id: I9f29e136bc091ddd3ae2ca38a495edcbff6c1cb8
CRs-Fixed: 2128481
Remove P2P debug functions from legacy code and apply the new
functions in UMAC P2P component.
Change-Id: I1ff627a553108c74be144232fd0a0406d88de395
CRs-Fixed: 2105808
In WMI_SERVICE_READY_EVENTID, check for number of dbs HW modes against
the metadata.
Change-Id: I043c93c4e6bc0dfdd73dbdc65bab683c56269308
CRs-Fixed: 2119387
When receive STOP_BSS, send WLAN_CLIENT_DISONNNECT event send to IPA.
And upon receiving WLAN_CLIENT_DISONNNECT, check if all clients are
already disconnected to avoid redundant event processing.
Change-Id: Ibb3074cdaf65da9ea8c2032df86f9d66b2fce014
CRs-Fixed: 2096338
Propagation from qcacld-2.0 to qcacld-3.0
ipv4 and ipv6 workqueues are initialized in open adapter for STA
and P2P modes but not for AP mode. The workqueues are cancelled
in stop adapter. The cancel_work_sync may be called on AP adapter
workqueue also, if just in time, the AP adapter mode has changed
to STA mode, for example during hostapd stop etc. This can cause
the cancel_work_sync to continuously loop since INIT_WORK has not
been called, finally raising CPU stuck. There is no harm in calling
INIT_WORK on any workqueue since it only makes sure that in cases
as above there is no undeterministic behaviour.
Fix cancel_work_sync issues by initializing ipv4 and ipv6 workqueues.
CRs-Fixed: 2121723
Change-Id: Ief8dd0c797dd1492fa30ca4e41da9e583548e21d
__iw_softap_set_ini_cfg assumes a given user supplied buffer is null
terminated, which can lead to a buffer overrun. Ensure the buffer is
null terminated by copying it to a new, oversized buffer whose last byte
is zero.
Change-Id: If94e753026f79a368cd6b9cb7c745ade4ae29452
CRs-Fixed: 2118809
Netdev Tx/Rx stat counters doesn't reflect packet counter from IPA
offload data path.
Change to add Tx/Rx packet counts from IPA uC data path through IPA uC
stats query.
Change-Id: If80dee818e97f4f75407885c20ee9abf2257be7c
CRs-Fixed: 956283
The original version of the driver was based upon wireless
extensions. Later when nl80211/cfg80211 support was added, in some
cases data received with nl80211 semantics was converted to wireless
extensions semantics. One such data item is the WPA version.
Now that wireless extensions have been deprecated, it is desirable to
align on cfg80211/nl80211 semantics. Therefore now align on enum
nl80211_wpa_versions for maintaining the WPA version.
Change-Id: I2a0fb6996b42adfe6dec7c14493c2dc10f83230c
CRs-Fixed: 2126880
It doesn't record current scan request and won't cleanup being
process scan request. In some Rome platform, host driver just load one
time, scan request status mismatch to cfg80211 if didn't cleanup scan
request, and then cause crash.
Change-Id: I000db80bdf5175775f2415130ee3a2974aefa4ea
CRs-Fixed: 2111330
As part of configure default filters over suspend code
changes wlan module loading broken.
Fix the loading issue by adding the newly added files
to Kbuild.
CRs-Fixed: 2017259
Change-Id: Ib33efa8f7f5e2ca8d9734181df94f70557e9f9cd
In suspend mode multicast, broadcast packets wakes up host,
this leads to higher power consumption.
Add support to configure the IPv6/IPv4 multicast, IPv4 broadcast, XID,
STP, DTP/LLC/CDP packet filters based on ini bit map param, before the
device goes to suspend mode and clear the same filters in resume.
CRs-Fixed: 2011442
Change-Id: Ib355459132086902ba008f2abd17415a8f569b41
In Rome platform, it use invalid radio id in FW event
WMI_RADIO_LINK_STATS_EVENTID and cause crash. So check
radio id when handling this event.
Change-Id: Iadf61fbde53f80f1081da9a386cf13f0cce69e3c
CRs-Fixed: 2123782
when unloading driver, there is possible that the driver_status
has been DRIVER_MODULES_CLOSED, then NETDEV_GOING_DOWN is received,
which will cause assert in qdf_mutex_acquire as lock has been
destoryed.
Change-Id: Ic7e26dc1eb9a40a2462b041b0f3b84452e448cfd
CRs-Fixed: 2126832
Number of profile data from firmware cannot be trusted. Check for
number of entries against the metadata in TLV header.
Change-Id: I0d8078f623a97e33ee1689398c291be75fe9a62a
CRs-Fixed: 2119391
Pending_event memory is dynamically allocated after driver loaded
but freed up only when driver unloading.
Fix to free pending_event memory when driver stop.
Change-Id: Ia748e311fc77fc99e193230910fccd7bc9b4f5a9
CRs-Fixed: 2126695
If SAP has no channel left to move then it will issue stop bss. In this
scenario, SAP is not cleaning up its entry from policy manager table
which causes stale entry left over in table.
Fix this situation by stopping the bss successfully and deleting entry
from policy manager table.
Change-Id: I7c7d305936fe16b0deebb9b7a67f7753cbf243e6
CRs-Fixed: 2112932
Release the NSS update request from the serialization active
command list in case the request fails.
Change-Id: Id6bfee6f510132bacdc69773c8aba90be43aa813
CRs-Fixed: 2112932
SoftAP start fails during station connection is in progress and the flag
update_beacon is not set. Also allow beacon/probe resp update in the middle
of p2p connection.
Change-Id: I13d89b6b8b51f999ff317d1f55dc3fcf48bdd422
CRs-Fixed: 2108186
This reverts Change-Id: I1887aab39d2fa13cc8a900164d2aa6d489464e42
Driver is no more acquiring qdf_conc_list_lock before calling
cds_get_pcl(). SME active queue will serialize connection request and
bss start commands.
Change-Id: I98066b8f1e756ae930ea97be6f8c6e6de244662d
CRs-Fixed: 2108186
For data stall continuous HDD tx timeout count of five
post HOST TX time out data stall event to handle it in
data detection module.
Change-Id: Ic6cf5e62f711cef5919a4a5e85e4232c622c04bb
CRs-Fixed: 2094393
