Vdev start req timeout is moved to target if.
Req msg type can be got from vdev mlme instead of wma rsp queue
in vdev start rsp handler.
Set bss params into vdev mlme priv when start vdev with add bss.
then can get bss params from vdev mlme priv when handle start
vdev add bss rsp.
Free hidden ssid vdev req after vdev restart return, don't need
it when handle rsp.
Change-Id: I956fc5a9164d5961513dfa922aee27af28483807
CRs-Fixed: 2516587
Use vdev_start_response to replace tpSwitchChannelParams
parameter in channel switch response handler.
Lim channel switch resp handler will be called directly, don't
use post msg.
Use vdev id to replace tpHalHiddenSsidVdevRestart in hidden
ssid response handler.
Change-Id: Ida0bfed3fea1cc0ff28ed15832765d446296f3be
CRs-Fixed: 2516582
While filling the QCN IE the IE length filled is 11 while actual
length is 8 and thus this lead to improper IE length in scan
additional ie while copying the default_scan_ies.
So fix the QCN IE length and add check for improper IE length check
while copying IE in scan additional ie.
Change-Id: I372af8c206d8f7ce0e93bc9c0fb14e222c6eb87e
CRs-Fixed: 2522208
As a part of vdev convergence, legacy vdev code for vdev delete/stop/
down is removed. WMA timer for vdev manager operations are deleted,
now target_if takes care of it.
Structure del_bss_params is no more used to store bss delete request
params, hence struct del_bss_params is cleaned up from legacy code.
Change-Id: I487d2683908b705176ff8064dd3ce7cd49a3ce47
CRs-Fixed: 2517880
Add a wait for PM freeze when wifi is turning on to make sure file system
and QMI are still accessible before attempting to download the FW and
trigger a QMI handshake with FW.
Change-Id: Ia2f3dc28abb9cab4b5dd8038ea02ac016eb74bbb
CRs-Fixed: 2521009
Time stamp for profiling system level power issues is currently using
qdf_get_system_timestamp(), which measures in milliseconds. To get more
fine granular data, use qdf_get_log_timestamp_usecs() to measure in
microseconds instead.
Change-Id: I920d0ec7c90ab602cbdc0d1efdb6061d6a72c122
CRs-Fixed: 2520939
Use QCS40X instead of QCS405 in config files. Kernel defconfig files for
QCS405 and QCS403 has been separated recently, and the arch has been
changed between these two chips. But all QCS related features and changes
in cld should all be included, so use CONFIG_ARCH_QCS40X to replace
CONFIG_ARCH_QCS405.
Change-Id: I6f0837bb3d3f1530aea5b2d4912741beb8c313bd
CRs-Fixed: 2519267
Return -EAGAIN from idle shutdown callback API if system suspend is
ongoing such that cnss driver does not turn off suspend the PCIe link
and psoc idle shutdown can be re-tried later.
Change-Id: If859abb70c18d03c2e73a8c589a4e138b98cb996
CRs-Fixed: 2518448
Add support to advertise the VHT MCS 10&11 support using vendor
specific IE to enable the MCS 10 and 11 support in VHT mode.
Change-Id: I2d197dcce20ab4aec617ca8a7f4a54b438fae635
CRs-Fixed: 2465662
In hdd_dis_connect_handler, roam_info is checked
for NULL in if(roam_info && roam_info->disconnect_ies),
but roam_info may be null pointer and is explicitly
dereferenced later. Add null pointer check before
it is dereferenced again.
Change-Id: I51f731323f01ddc657c57d20d8c63317400c92ab
CRs-Fixed: 2518450
FW sends regdb and bdf regdb version as a part of service ready event.
Extract the versions and populate it to HDD layer.
Change-Id: I2c9a40832361381c66a482d93ef5721fa7d6ffe4
CRs-Fixed: 2486984
In legacy code WLAN_LEGACY_WMA_ID reference was released after
sending vdev delete command to firmware. Now with converged vdev
manager, if wmi service "wmi_service_sync_delete_cmds" is not enabled
then vdev delete response is sent to upper layer through target_if.
Hence WLAN_LEGACY_WMA_ID reference for vdev is released before sending
vdev delete command and then wma_txrx_node for the vdev is cleaned up.
Change-Id: I717a7911a5139dc5145e7702e831f6f026c8f3aa
CRs-Fixed: 2518231
There is possible excessive log in hdd_rx_packet_cbk when
receiving arp pkt. so lower log level from info to debug.
Change-Id: If7fbe1f86e98ca22172f9b21205b7215c435988b
CRs-Fixed: 2511832
cds_cfg is assigned the return value from function
cds_get_ini_config. cds_cfg may be null pointer. Add
null pointer check before cds_cfg is
dereferenced.
Change-Id: I184c0a589fa660c5c49cd951986ad918cbc42bcd
CRs-Fixed: 2518433
Add timing profiling log for runtime PM operations such that we can
know how much time each operation is taking.
Change-Id: Iad2aca8e8bb2f0dadc14d24e3a5c2b03938df9df
CRs-Fixed: 2518935
As a part of 802.11ax amendment, 6GHz band operation is added.
Since the 6 GHz channel numbers are overlapping with existing 2.4GHz
and 5GHz channel numbers, use frequency to identify unique channel
operation instead of channel number. Channel frequency is unique across
bands.
As a part of above requirement, in the existing WMI interface handlers
and related functions, wherever missing, add frequency attributes to
identify unique channel operation.
Change-Id: I3853d6e64e63eb219282afac4f56ccf398b0a04f
CRs-Fixed: 2517897
The TSF deviation is more than 100ns when the capture interval is 100sec.
Lower the interval to 1sec to keep the drift within limit of 100us.
Change-Id: I2a6f7bf2d06d5d67854cbab6b582009f2cec39bf
CRs-Fixed: 2515981
Check napi_gro_recevie result before do napi_gro_flush when bus
bandwidth is idle (<18 Mbps), only if napi_gro_recevie result is
not GRO_DROP and GRO_NORMAL then do napi_gro_flush for each RX packet.
Change-Id: I8cd75fb680ad4cb13f8d8677136f51c5a0548b6d
CRs-Fixed: 2515794
This reverts change-id Ie40db69a24dc1e0b86f140ca1aad91bd3b10e95e.
The reverted changes was causing regression, that optional
firmware not loadable even it exists.
Change-Id: I02a45e9be635e4ce0787f0a24480e42129c59874
CRs-Fixed: 2516015
Return number of msdus poped as return value for
htt_rx_frag_pop_hl to process fragmentation indication
correctly.
Change-Id: I104c04757aa8bfac5d6516b1455e1e0506b460a4
CRs-Fixed: 2419759
Currently the sap ctx's channel list is not freed
as part of undo acs, and hence can lead to mem leak
when the do acs and SSR is triggered in parallel.
Scenario:-
1. Turn on SAP
2. Do SSR in parallel
3. Unload WLAN
Fix is to clear the channel list as part of undo
acs.
Change-Id: Ie8dcace1d32aeec2621e785d793290d70c194f62
CRs-Fixed: 2511752
a. when T-put < 18Mbps, do GRO/GRO flush for each RX packet.
b. when T-put can kept stable (18Mbps ~ 60 Mbps) last >= 1 second ,
skip GRO flush logic.
Change-Id: Ic8075f10f72b479c6941d7ac12a71fd90f945094
CRs-Fixed: 2509672
Before sending vdev delete command to target_if layer, attach vdev
delete params to wma_txrx_node's del_staself_req member in wma layer.
This helps while responding to vdev delete command in case wmi service
"wmi_service_sync_delete_cmds" is disabled.
VDEV delete command response is sent to upper layer even vdev_mlme
object is not found.
Change-Id: Idfd8b036ff1ea676dd3ad8be703512ff84f299b7
CRs-Fixed: 2510460
Configuration for Issue:-
DUT configuration:-
1. Configure DUT's country as US where channel 165 does
not support channel bandwidth of 40 mhz.
AP Configuration:-
1 Configure the AP in a country where channel 165
supports channel bandwidth 40MHZ.
Scenario of the issue:-
1.Connect to a diff AP on some channel x with same SSID,
and then roam to this AP.
Observation:-
The DUT would connect in 40 mhz to this AP instead of 20Mhz,
which violates the DUT's country reg rules.
Expectation:-
The DUT should re-connect only in 20Mhz on channel 165, or
only in max BW supported by reg in that country.
Issue:-
The DUT does not consider the max bandwidth allowed for the channel
in the country configured, and allow the re-association only
in the respective bandwidth.
Fix:-
Send the max BW supported by the channels in the current
reg domain to the FW so that it considers the max BW of the
channel and AP capability and then roam in the respective BW
only.
Change-Id: I1730d6c65d3dd305dcf2ebe340c3d5ad950761d7
CRs-Fixed: 2504900
Reduce the log level from err or info to debug so that logs
are not printed on console.
Change-Id: I0d33c2a8f5b4bb4974656ac0d1eb6713a74cb5f4
CRs-Fixed: 2516281
MPTA helper and Coex configuration features are not included
after latest system compilation updating. Modify configure
file qcs40x.snoc.perf_defconfig to include them.
Change-Id: I8ecad6c84bd4ca2d8e1b69f0cea14b61b2545ca3
CRs-Fixed: 2511723
As part of RSO update config, roam scan mode is set to 4 before
the WMI_ROAM_SCAN_RSSI_THRESHOLD command is sent to the firmware.
And after WMI_ROAM_SCAN_RSSI_THRESHOLD is sent, the roam scan
mode value is again set back to 7(value 7 enables RSSI scan and
periodic scan). There is a very small window between these two
commands where BMISS event is received and firmware forwards it
to the host which causes a disconnection.
Fix is to disable sending roam scan mode to 4 before sending the
WMI_ROAM_SCAN_RSSI_THRESHOLD command.
Change-Id: I2c22308d711e71e67d132a0bd121aed66497998b
CRs-Fixed: 2508762
Currently Host issue a disconnect and cleanup for current AP,
even if the offloaded roaming feature has started, but has not
completed for some reason. This results in connection loss with
the current AP.
Fix is to call abort event SIR_ROAMING_ABORT in case of roaming
offload timeout in order to maintain the connection with the
current AP.
Change-Id: I4168f8aeb7a759896a5d93e1918ce6542e61b37e
CRs-Fixed: 2508449
Currently, HOST sets discon_in_progress flag after posting
ROAM_SCAN_OFFLOAD_STOP command to WMA for a session. In case of
disconnection in HOST while roaming in FW if ROAM SYNC IND from fw comes
to host after posting ROAM_SCAN_OFFLOAD_STOP command to WMA, host start
processing SYNC IND and FW start processing ROAM_SCAN_OFFLOAD_STOP
which will cause to cleanup/disconnect with new AP to which it has just
roamed. After this cleanup fw will send HO_FAIL.
Now host as part of roam sync indication sends PEER_REORDER_QUEUE_SETUP
for the deleted peer which results in firmware assert.
Fix is to set discon_in_progress flag to true before posting
ROAM_SCAN_OFFLOAD_STOP command to WMA in order to ignore ROAM SYNC IND
and return status as failure to fw.
Change-Id: Id5c787d5489a6c0722b090951db388484f94f2e9
CRs-Fixed: 2505851
When driver receives the command to disable the channels
it maintains a list of the channels which are disabled.
During SAP stop, driver restores the disabled channels
but it is not freeing the cache list. Now when again the
command is issued to disable the channels, driver is not
processing this command as it still has the channels in its
cached list which were disabled during previous command.
This results into failure of current command and all the
subsequent commands to disable the channels until the
cache list is not cleared with set_disable_channel_list
command with empty channel list.
To address above issue, clear the cache channel list
as soon as driver restores the channels on stop bss.
Change-Id: I6b8c7ba250ef38b892ab83621add45fbfc09a2cd
CRs-fixed: 2496642
In HL data path, when HTT credits are used outside the HL scheduler,
credits are getting deducted form target_tx credit only.
When CONFIG_FEATURE_HL_GROUP_CREDIT_FLOW_CONTROL is enabled, credits
should be deducted from TXQ group also.
Change-Id: Ice4160043fc1d812686f8ce7ee310110299d2276
CRs-Fixed: 2485819
Copy the sap channel list that is obtained after filtering
the channel list from all the checks like SRD, DFS
to maintain the sync between the ACS module, and the sap
channel select logic.
Change-Id: I78a835f700ab34fa81b9b748e6ad28ca3b726650
CRs-Fixed: 2513628
WMA interface PMF capability is vdev configuration hence do not
update the capability in WMA interface based on peer capability.
Change-Id: I08b39b9bc631321aa77aa1ab3bcbf1841bb3dda1
CRs-Fixed: 2504060
Vdev_id and ENABLE_ROAM_TRIGGERS_ALL are passed to
hdd_send_roam_triggers_to_sme in reverse order. Pass them in
correct the order.
Change-Id: I79d2a843ee9f237620d31dbf91e3c57750e66e88
CRs-Fixed: 2514476
As part of vdev target if convergence the new vdev command
resp time are defined in target if layer.
So use the vdev timer values from target if.
Change-Id: Ib74f91331e4cb470233e678ded9159e17045467e
CRs-fixed: 2513794
As per current implementation, hdd_mic_flush_work makes a call
to qdf_flush_work irrespective of whether the work is initialized
or not.
Since flush_work() without INIT_WORK() is erroneous, ignore the call
to flush_work if work is not initialized.
Change-Id: Ib96439e1416188e643935a4ddaa13671d221c1e2
CRs-Fixed: 2514424
Currently, as part of ndi_delete broadcast sta id is set
to invalid. But set this sta id to invalid as part of
ndi delete response from FW.
Change-Id: I4df843c4bce1c06b5c62cfd932b681e3320e5341
CRs-Fixed: 2513607
In case of DBS, two AP can operate on different band together.
Current logic of resetting CAC state in sap_clear_global_dfs_param
function assumes that if two APs are up state then it must be SCC
scenario and resulting in dropping of tx packets if stop follwed by
start operation is performed on AP on DFS channel.
This change reset CAC state as part of stop AP if another AP is
operating on 2.4GHz in case of DBS operation.
Change-Id: I3f71606bf610d45184a0fa81d2b9d9a6c11f72e8
CRs-Fixed: 2509808
QCA_ATTR_ROAM_CONTROL_SCAN_FREQ_LIST is a nested attribute which
carries frequencies as sub attributes. Validate the size of each
sub attribute to make sure it's of size uint32_t. Extract the
frequencies if all are of valid size. Return failure if an
invalid length attribute is found.
Change-Id: I1743c2dbef640b28b78504a548edbb70f4f29e49
CRs-Fixed: 2513822
If radar event is indicated in station vdev, it may be dropped by
station vdev since station does not support DFS master.
Select first sap vdev started in dfs channel to handle radar event.
Change-Id: I74229eb02c6ae6d81042df6b736d231db26253b5
CRs-Fixed: 2512836
Scan period is configured through the DRIVER command
SETROAMSCANPERIOD currently. Add provision to set the same through
the roam subcmd and the attr QCA_ATTR_ROAM_CONTROL_SCAN_PERIOD
Change-Id: I3dd56f56ac8bc4ba48a88f8df292e9d4d5545fed
CRs-Fixed: 2509656
Use "client mac address" in bootp protocol to get
station id to handle scenarion when
DHCP exchanges(discover/offer/request/ack) happens
with broadcast address as destination address.
Change-Id: Ie233b2ffed1533f0a45fded199bb09649e48b4dd
CRs-Fixed: 2506023
Userspace may query for current configured full roam scan period
through the vendor cmd QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_GET
and the attribute QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD.
Fill the full scan period in the same attribute and send as reply
Change-Id: I0ab8b3d7b469515244ce27accc852c6d93514b2d
CRs-Fixed: 2508804
Userspace may configure and enable roam control and query for
the status. Add provision to send the same as vendor cmd reply
Change-Id: I7b82f85fa560c974eedc5115276bd87a84f9d3a0
CRs-Fixed: 2508802
When wifi is off, unnecessary error logs are printed. To avoid these logs
from printing, move hif context assignment to right before its usage.
Change-Id: Ie2313f796674885a7a518693a09877df4e6cb817
CRs-Fixed: 2513187
Topic: 6ghz_chan_to_freq
Convert channel to freq in tpAddBssParams and wma_vdev_start_req
structure to avoid duplicate channel numbers in 6ghz, and 2.4ghz
operation.
Change-Id: I8f657a566d1555efa07bf9155b84c37431c57f86
Crs-Fixed: 2511312
Userspace disables the roam control config once it's done with
the controlled roaming. Driver should restore the params changed
by roam control config enable and proceed with roaming as per
its default behavior.
Restore the below params which are getting modified as per
the current implementation,
1. Roam trigger bitmap
2. Scoring
3. Scan period
4. Full scan period
Change-Id: I1be699825bdd798f20a3432ebccb922ade67f89b
CRs-Fixed: 2508780
Userspace can disable/enable scoring for roam candidate
selection through roam subcmd and the attribute
QCA_ATTR_ROAM_CAND_SEL_CRITERIA_SCORE_ENABLE.
Firmware supports the below configurations currently,
1. Default selection criteria where all selection criteria
are enabled and different weightages/scores are given to
different criteria.
This will be enabled when userspace doesn't specify any
candidate selection criteria.
2. Legacy candidate selection criteria where scoring
algorithm is disabled and only RSSI is considered for
roam candidate selection.
this will be enabled when userspace specify 100% weightage
for RSSI.
Rest of the combinations are not supported for now.
Update the RSO config whenever scoring is enabled/disabled
Change-Id: Ibb787ef5433eebbdd3633748135ba6e314c931b6
CRs-Fixed: 2508778
Userspace enables the roam control config and may query for it
later. In order to indicate the current status to userspace,
cache the same in struct sCsrNeighborRoamControlInfo
Change-Id: Ib535d6940df48305bda74a624604217d1f968861
CRs-Fixed: 2508777
Userspace can configure different roam triggers as defined
in qca_vendor_roam_triggers through the roam subcmd
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET and the
attribute QCA_ATTR_ROAM_CONTROL_TRIGGERS. Send the roam trigger
bitmap to firmware
Change-Id: I692110a2ae1ee5a35bb248b9138080a7dfb02cf6
CRs-Fixed: 2508776
Userspace can update the full scan period through the roam subcmd
QCA_WLAN_VENDOR_ROAMING_SUBCMD_CONTROL_SET and the attribute
QCA_ATTR_ROAM_CONTROL_FULL_SCAN_PERIOD. Send the same to firmware
as part of roam scan offload command
Change-Id: I7c1046763d693faa3340b655848d3306ef92e06c
CRs-Fixed: 2508775
Add bss req bss_id vdev_id is not set to vdev id and thus if vdev start
fails, wma_remove_peer_on_add_bss_failure try to delete
peer from vdev id 0 instead of proper vdev_id.
Fix is to set proper vdev id to add bss req bss_id.
Change-Id: I9bbe7daf03fe2872d7026872e8dd7818840f9345
CRs-Fixed: 2513007
Configure the preferred channel list received from vendor
roam subcmd command ROAMING_SUBCMD_CONTROL_SET as dynamic channel
list to firmware. Combine this channel list with the existing
occupied channel list and send to firmware. Flush this channel
list as part of csr_cleanup
Change-Id: Ibc45291f72844331096cb460257cab6f0b0095dc
CRs-Fixed: 2507159
In current SAE implementation, lim_process_sae_auth_frame() and
lim_process_sae_preauth_frame() all pass parameter session id 0
to lim_send_sme_mgmt_frame_ind(). In some test case, once vdev
id 0 is removed, hdd_indicate_mgmt_frame() can not get adapter
through vdev id 0, then SAE frame will not forward to supplicant.
Update SAE frame session id to make sure at least one adapter can
be found. Once adapter is available, __hdd_indicate_mgmt_frame()
can get the expected interface through destination mac address.
Change-Id: I3e8f430c4760448c6cc8dab9464979371de86118
CRs-Fixed: 2507342
When vdev create happens, objmgr creates vdev and stores
vdev_id into adapter, vdev_create message is posted to
scheduler thread and driver wait for the session_open_event
to be completed. Before this event completes if SSR
occures, session open event is forcefully set which leads
to the failure of vdev create. In current implementation
in case of force event set, driver returns without
destroying the vdev from objmgr which leads to vdev leak
in stop modules.
To resolve above issue, destroy vdev from objmgr in
case if vdev create fails.
Change-Id: Id0bbde0085d2b4d91b0590e3bb8a7798cd0ba0fa
CRs-fixed: 2505590
Force set peer's phymode to the phymode of current interface if first
one big then second one, then TDLS link can't select more better
phymode when DUT support VHT mode and connect to 11A mode AP.
Change-Id: Idc72e04dcdf7ead3b52effc2c06862bc9dddd732
CRs-Fixed: 2512622
If STA disconnect failed for any reason, cleanup IPA STA iface
if not already done.
Change-Id: I27ff33324bc4724e8470af9a0c434fa03e8aa5c3
CRs-Fixed: 2505563
Set hidden_ssid when restart sap on another channel, currently tested 2
methods to restart sap on another channel: 1, force-scc switch to station
channel; 2, iwpriv wlan1 setChanChange x. Both of them run into error
state: with hidden_ssid set in hostapd.conf: ignore_broadcast_ssid=1,
after channel switch, APUT reply broadcast probe request with it's SSID.
Copy pe session parameter: ssidHidden which stored user setting to next
channel vdev start.
Change-Id: I56580529e2b0db673c6b28c75094a7fd225cba77
CRs-Fixed: 2506214
Unused members of delete bss params structure are removed
and structure is re-framed.
Change-Id: Ib2e7c72e0636765341792a79aa12968a84ed4879
CRs-Fixed: 2512877
When wifi is off wlan module is closed and hence allow cfg80211
suspend/resume to pass and return success to kernel.
Change-Id: Ic7d43a690c75be1254afa97f872d5c8228f93fcc
CRs-Fixed: 2512492
Currently the function hdd_roam_deregister_tdlssta is not declared
as static when the macro FEATURE_WLAN_TDLS is not defined. This can
cause a multiple definition error.
Declare the function as static so as to avoid this build time error.
Change-Id: Id85f8bed57a7bdfbeac5722ea687066f7f74a50f
CRs-Fixed: 2511744
Currently roam channel list is directly accessed from
mac->roam.neighborRoamInfo[sessionId].cfgParams.channelInfo
in multiple APIs to set/clear.
This needs to be enhanced as as firmware supports two channel
lists(static and dynamic) for roam scan, userspace may configure
both the lists. Cleanup the APIs to accommodate both of the
channel lists. Rename the variable channelInfo of cfgParams to
specific_chan_info to suit the usage.
Change-Id: I67548bc040c2296b75b9429f5891a5251a2a88d6
CRs-Fixed: 2507157
Legacy code releases vdev start wakelock after vdev down
command sent to firmware to overcome race condition. Target_if
common code takes care for wakelocks.
Hence, do not release start wakelock in legacy code.
Change-Id: I550ffb17e2e29f3b0bad618dc9ef9463a94800aa
CRs-Fixed: 2512151
In function wlan_hdd_set_sap_csa_reason, sap_ctx pointer is
dereferenced without NULL check.
Add NULL check to avoid null pointer access.
Change-Id: I74bbfdcae6d5a06d5eaf0cd66e3ff9c3380c6bb0
CRs-Fixed: 2512034
Add configuration for gpio pin used to send strobe to wlan hw.
The host driver will latch the current time and toggle the gpio
to generate a strobe to wlan hw.
The tsf will be latched on detecting the strobe and it will be
made available in a register for sw access.
The wlan fw will read this tsf and report it to driver using tsf event.
Change-Id: I4365d97d22836ddbbd2bf9913d4f723e5a870369
CRs-Fixed: 2495152
For runtime PM if the bus is suspended driver need to consider
extra 6 sec time for bus resume.
Thus add 6 sec extra in WMI timeouts if runtime PM is supported.
Change-Id: I5515cc889a0315382bac11a33ea6f901b7af1c46
CRs-Fixed: 2507029
In case of HL, send tx completion bit in HTT tx descriptor
to receive tx completion from FW and disable DHCP indication
to FW properly.
Change-Id: Iff8e0c1f5d95c4f62af8b498552d92b57006969c
CRS-Fixed: 2506011
Replace lim functions parameter struct scheduler_msg
with struct bss_params.
Internal functions don't need param struct scheduler_msg,
wma can call lim API: lim_handle_mlm_add_bss_rsp directly
instead of post msg.
Refactor struct bss_params memory free method.
whether success or fail when handle lim add bss rsp,
struct bss_params memory need free, it is simple and
clear to free only in one place: end of
lim_handle_mlm_add_bss_rsp.
Change-Id: I2d5d647a6949b1e0bdfbbe9a4dfb390a362a75ee
CRs-Fixed: 2508876
This member renamed by another change recently, and change here
accordingly to avoid compilation issue.
Change-Id: I65903cdb5255deca4b4a83daceec178790e76501
CRs-Fixed: 2505462
Currently the host driver sets PMKSA op_flag for flush and
delete PMKSA entry as in both the cases PMK length is 0.
This is not correct because for delete PMKSA command only
the bssid and SSID will be sent to the firmware.
For the host driver to distinguish between del_pmksa and
flush pmksa, the is_flush_all flag should be used.
is_flush_all: true - Flush pmksa
is_flush_all: false - set/del pmksa based on the action flag.
Change-Id: I7eac65317a9c6904cfd08acce328a65df451269e
CRs-Fixed: 2503372
Cleanup ol_txrx_flush_cache_rx_queue to find peer
from peer_list instead of sta_id.
Change-Id: Ia737e732051f3cdad53b1a552eb273b8a05562aa
CRs-Fixed: 2508259
The mapping of sta_id to the adapter in hdd context stores the adapter
with respect to the corresponding sta_id. Currently, the mapping is not
used anywhere in the driver even though the adapters are stored in it.
As there is no usage for the mapping, remove it as a part of sta_id
cleanup effort.
Change-Id: I26590a69e61d82f723a83eb3f9f24c42afa6c5a2
CRs-Fixed: 2511767
The sap unsafe channel restart process include two subprocesses: CSA ie
update and channel switch, but CSA ie update request using
mac->sap.SapDfsInfo to save target channel switch parameters, which
would be overwritten by 2nd sap restart at same time. For example:
SAP1 on chan 1 and SAP2 on chan 36, then lte coex mark chan 1 and
chan 36 as unsafe channels, now SAP1 and SAP2 would switch to same
channel, but actually they can be on different channels doing DBS.
To fix it, one option is save the target channel switch parameters to
different session, but looks it may introduce a lot of code change,
because the logic is shared with DFS/concurrency. So the simple option
is making sap unsafe channel restart execute once at same time.
Change-Id: Ieaab3007fb6e79a9741f892e86771d2f52c03e3c
CRs-Fixed: 2504867
Refactor vdev stop and down code to target_if common code.
Remove legacy code for vdev stop and down.
Change-Id: I4ab0743d39a3b37816ab9f18e8850cadf1335c15
CRs-Fixed: 2506649
In function csr_check_concurrent_channel_overlap, local
variable intf_ch is defined as uint16_t, but its pointer
is casted to uint32_t * before invoking
policy_mgr_get_sap_mandatory_channel, which will do
32-bit memory write and causes a stack memory over-
writing.
Call Trace:
dump_stack+0x46/0x59
print_address_description+0x66/0x22b
kasan_report+0x21f/0x245
policy_mgr_get_sap_mandatory_channel+0x1fd/0x258 [wlan]
csr_check_concurrent_channel_overlap+0xf84/0x10d2 [wlan]
sme_check_concurrent_channel_overlap+0xaa/0xf0 [wlan]
wlansap_check_cc_intf+0x102/0x124 [wlan]
wlan_hdd_get_channel_for_sap_restart+0x506/0x8f8 [wlan]
policy_mgr_check_sta_ap_concurrent_ch_intf+0x35e/0x425[wlan]
process_one_work+0x2cc/0x53b
worker_thread+0x357/0x490
Change the type of the 2nd parameter to uint16_t within
function policy_mgr_get_sap_mandatory_channel, so only
16-bit memory writing will take place.
Change-Id: If514a394e65d005a1fe025c0e753bf7440dd5dde
CRs-Fixed: 2508798
Direct buffer tx component initializes in target_if_init, which cause
platform assert since g_umac_glb_obj is NULL. So change the order to
avoid NULL pointer access.
Change-Id: I348775d08ccc478caef605c2ae8d1b6d65d77eb2
CRs-Fixed: 2497809
Avoid compiling ol_rx_reorder.c and ol_rx_reorder_timeout.c
for low latency and only compile for high latency
data path.
Change-Id: I1f3819fa093766abba87e5dc6dc44e6d2188740b
CRs-Fixed: 2506005
